rethook: use preempt_{disable, enable}_notrace in rethook_trampoline_handler

commit be243bacfb25f5219f2396d787408e8cf1301dd1 upstream.

This patch replaces preempt_{disable, enable} with its corresponding
notrace version in rethook_trampoline_handler so no worries about stack
recursion or overflow introduced by preempt_count_{add, sub} under
fprobe + rethook context.

Link: https://lore.kernel.org/all/20230517034510.15639-2-zegao@tencent.com/
Fixes: 54ecbe6f1ed5 ("rethook: Add a generic return hook")
Signed-off-by: Ze Gao <zegao@tencent.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mte: Do not set PG_mte_tagged if tags were not initialized

commit c4c597f1b367433c52c531dccd6859a39b4580fb upstream.

The mte_sync_page_tags() function sets PG_mte_tagged if it initializes
page tags. Then we return to mte_sync_tags(), which sets PG_mte_tagged
again. At best, this is redundant. However, it is possible for
mte_sync_page_tags() to return without having initialized tags for the
page, i.e. in the case where check_swap is true (non-compound page),
is_swap_pte(old_pte) is false and pte_is_tagged is false. So at worst,
we set PG_mte_tagged on a page with uninitialized tags. This can happen
if, for example, page migration causes a PTE for an untagged page to
be replaced. If the userspace program subsequently uses mprotect() to
enable PROT_MTE for that page, the uninitialized tags will be exposed
to userspace.

Fix it by removing the redundant call to set_page_mte_tagged().

Fixes: e059853d14ca ("arm64: mte: Fix/clarify the PG_mte_tagged semantics")
Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: <stable@vger.kernel.org> # 6.1
Link: https://linux-review.googlesource.com/id/Ib02d004d435b2ed87603b858ef7480f7b1463052
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20230420214327.2357985-1-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qdio: fix do_sqbs() inline assembly constraint

commit 2862a2fdfae875888e3c1c3634e3422e01d98147 upstream.

Use "a" constraint instead of "d" constraint to pass the state parameter to
the do_sqbs() inline assembly. This prevents that general purpose register
zero is used for the state parameter.

If the compiler would select general purpose register zero this would be
problematic for the used instruction in rsy format: the register used for
the state parameter is a base register. If the base register is general
purpose register zero the contents of the register are unexpectedly ignored
when the instruction is executed.

This only applies to z/VM guests using QIOASSIST with dedicated (pass through)
QDIO-based devices such as FCP [zfcp driver] as well as real OSA or
HiperSockets [qeth driver].

A possible symptom for this case using zfcp is the following repeating kernel
message pattern:

zfcp <devbusid>: A QDIO problem occurred
zfcp <devbusid>: A QDIO problem occurred
zfcp <devbusid>: qdio: ZFCP on SC <sc> using AI:1 QEBSM:1 PRI:1 TDD:1 SIGA: W
zfcp <devbusid>: A QDIO problem occurred
zfcp <devbusid>: A QDIO problem occurred

Each of the qdio problem message can be accompanied by the following entries
for the affected subchannel <sc> in
/sys/kernel/debug/s390dbf/qdio_error/hex_ascii for zfcp or qeth:

<sc> ccq: 69....
<sc> SQBS ERROR.

Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Cc: Steffen Maier <maier@linux.ibm.com>
Fixes: 8129ee164267 ("[PATCH] s390: qdio V=V pass-through")
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/crypto: use vector instructions only if available for ChaCha20

commit 8703dd6b238da0ec6c276e53836f8200983d3d9b upstream.

Commit 349d03ffd5f6 ("crypto: s390 - add crypto library interface for
ChaCha20") added a library interface to the s390 specific ChaCha20
implementation. However no check was added to verify if the required
facilities are installed before branching into the assembler code.

If compiled into the kernel, this will lead to the following crash,
if vector instructions are not available:

data exception: 0007 ilc:3 [#1] SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7+ #11
Hardware name: IBM 3931 A01 704 (KVM/Linux)
Krnl PSW : 0704e00180000000 000000001857277a (chacha20_vx+0x32/0x818)
           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0000037f0000000a ffffffffffffff60 000000008184b000 0000000019f5c8e6
           0000000000000109 0000037fffb13c58 0000037fffb13c78 0000000019bb1780
           0000037fffb13c58 0000000019f5c8e6 000000008184b000 0000000000000109
           00000000802d8000 0000000000000109 0000000018571ebc 0000037fffb13718
Krnl Code: 000000001857276a: c07000b1f80b        larl    %r7,0000000019bb1780
           0000000018572770: a708000a            lhi     %r0,10
          #0000000018572774: e78950000c36        vlm     %v24,%v25,0(%r5),0
          >000000001857277a: e7a060000806        vl      %v26,0(%r6),0
           0000000018572780: e7bf70004c36        vlm     %v27,%v31,0(%r7),4
           0000000018572786: e70b00000456        vlr     %v0,%v27
           000000001857278c: e71800000456        vlr     %v1,%v24
           0000000018572792: e74b00000456        vlr     %v4,%v27
Call Trace:
 [<000000001857277a>] chacha20_vx+0x32/0x818
Last Breaking-Event-Address:
 [<0000000018571eb6>] chacha20_crypt_s390.constprop.0+0x6e/0xd8
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Fix this by adding a missing MACHINE_HAS_VX check.

Fixes: 349d03ffd5f6 ("crypto: s390 - add crypto library interface for ChaCha20")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 5.19+
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
[agordeev@linux.ibm.com: remove duplicates in commit message]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: fix command reject error on ESE devices

commit c99bff34290f1b994073557b754aff86e4c7b22e upstream.

Formatting a thin-provisioned (ESE) device that is part of a PPRC copy
relation might fail with the following error:

dasd-eckd 0.0.f500: An error occurred in the DASD device driver, reason=09
[...]
24 Byte: 0 MSG 4, no MSGb to SYSOP

During format of an ESE disk the Release Allocated Space command is used.
A bit in the payload of the command is set that is not allowed to be set
for devices in a copy relation. This bit is set to allow the partial
release of an extent.

Check for the existence of a copy relation before setting the respective
bit.

Fixes: 91dc4a197569 ("s390/dasd: Add new ioctl to release space")
Cc: stable@kernel.org # 5.3+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230519102340.3854819-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode()

commit 9b5a04ac3ad9898c4745cba46ea26de74ba56a8e upstream.

During unmount process of nilfs2, nothing holds nilfs_root structure after
nilfs2 detaches its writer in nilfs_detach_log_writer().  However, since
nilfs_evict_inode() uses nilfs_root for some cleanup operations, it may
cause use-after-free read if inodes are left in "garbage_list" and
released by nilfs_dispose_list() at the end of nilfs_detach_log_writer().

Fix this issue by modifying nilfs_evict_inode() to only clear inode
without additional metadata changes that use nilfs_root if the file system
is degraded to read-only or the writer is detached.

Link: https://lkml.kernel.org/r/20230509152956.8313-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+78d4495558999f55d1da@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/00000000000099e5ac05fb1c3b85@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s/radix: Fix soft dirty tracking

commit 66b2ca086210732954a7790d63d35542936fc664 upstream.

It was reported that soft dirty tracking doesn't work when using the
Radix MMU.

The tracking is supposed to work by clearing the soft dirty bit for a
mapping and then write protecting the PTE. If/when the page is written
to, a page fault occurs and the soft dirty bit is added back via
pte_mkdirty(). For example in wp_page_reuse():

entry = maybe_mkwrite(pte_mkdirty(entry), vma);
if (ptep_set_access_flags(vma, vmf->address, vmf->pte, entry, 1))
update_mmu_cache(vma, vmf->address, vmf->pte);

Unfortunately on radix _PAGE_SOFTDIRTY is being dropped by
radix__ptep_set_access_flags(), called from ptep_set_access_flags(),
meaning the soft dirty bit is not set even though the page has been
written to.

Fix it by adding _PAGE_SOFTDIRTY to the set of bits that are able to be
changed in radix__ptep_set_access_flags().

Fixes: b0b5e9b13047 ("powerpc/mm/radix: Add radix pte #defines")
Cc: stable@vger.kernel.org # v4.7+
Reported-by: Dan Horák <dan@danny.cz>
Link: https://lore.kernel.org/r/20230511095558.56663a50f86bdc4cd97700b7@danny.cz
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230511114224.977423-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm/tpm_tis: Disable interrupts for more Lenovo devices

commit e7d3e5c4b1dd50a70b31524c3228c62bb41bbab2 upstream.

The P360 Tiny suffers from an irq storm issue like the T490s, so add
an entry for it to tpm_tis_dmi_table, and force polling. There also
previously was a report from the previous attempt to enable interrupts
that involved a ThinkPad L490. So an entry is added for it as well.

Cc: stable@vger.kernel.org
Reported-by: Peter Zijlstra <peterz@infradead.org> # P360 Tiny
Closes: https://lore.kernel.org/linux-integrity/20230505130731.GO83892@hirez.programming.kicks-ass.net/
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/iommu: Incorrect DDW Table is referenced for SR-IOV device

commit 1f7aacc5eb9ed2cc17be7a90da5cd559effb9d59 upstream.

For an SR-IOV device, while enabling DDW, a new table is created and
added at index 1 in the group. In the below 2 scenarios, the table is
incorrectly referenced at index 0 (which is where the table is for
default DMA window).

1. When adding DDW

   This issue is exposed with "slub_debug". Error thrown out from
   dma_iommu_dma_supported()

   Warning: IOMMU offset too big for device mask
   mask: 0xffffffff, table offset: 0x800000000000000

2. During Dynamic removal of the PCI device.

   Error is from iommu_tce_table_put() since a NULL table pointer is
   passed in.

Fixes: 381ceda88c4c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230505184701.91613-1-gbatra@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/iommu: DMA address offset is incorrectly calculated with 2MB TCEs

commit 096339ab84f36beae0b1db25e0ce63fb3873e8b2 upstream.

When DMA window is backed by 2MB TCEs, the DMA address for the mapped
page should be the offset of the page relative to the 2MB TCE. The code
was incorrectly setting the DMA address to the beginning of the TCE
range.

Mellanox driver is reporting timeout trying to ENABLE_HCA for an SR-IOV
ethernet port, when DMA window is backed by 2MB TCEs.

Fixes: 387273118714 ("powerps/pseries/dma: Add support for 2M IOMMU page size")
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Greg Joyce <gjoyce@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230504175913.83844-1-gbatra@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: ata: ahci-ceva: Cover all 4 iommus entries

commit a7844528722619d2f97740ae5ec747afff18c4be upstream.

Current only one entry is enabled but IP itself is using 4 different IDs
which are already listed in zynqmp.dtsi.

sata: ahci@fd0c0000 {
compatible = "ceva,ahci-1v84";
...
iommus = <&smmu 0x4c0>, <&smmu 0x4c1>,
 <&smmu 0x4c2>, <&smmu 0x4c3>;
};

Fixes: 8ac47837f0e0 ("arm64: dts: zynqmp: Add missing iommu IDs")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Michal Simek <michal.simek@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/gfx11: update gpu_clock_counter logic

commit d5aa417808cf14c052ca042920b3c6b9f1dc6aa4 upstream.

This code was written prior to previous updates to this
logic for other chips.  The RSC registers are part of
SMUIO which is an always on block so there is no need
to disable gfxoff.  Additionally add the carryover and
preemption checks.

v2: rebase

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.y: 5591a051b86b: drm/amdgpu: refine get gpu clock counter method
Cc: stable@vger.kernel.org # 6.2.y: 5591a051b86b: drm/amdgpu: refine get gpu clock counter method
Cc: stable@vger.kernel.org # 6.3.y: 5591a051b86b: drm/amdgpu: refine get gpu clock counter method
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: refine get gpu clock counter method

commit 5591a051b86be170a84943698ab140342602ff7b upstream.

[why]
regGOLDEN_TSC_COUNT_LOWER/regGOLDEN_TSC_COUNT_UPPER are protected and
unaccessible under sriov.
The clock counter high bit may update during reading process.

[How]
Replace regGOLDEN_TSC_COUNT_LOWER/regGOLDEN_TSC_COUNT_UPPER with
regCP_MES_MTIME_LO/regCP_MES_MTIME_HI to get gpu clock under sriov.
Refine get gpu clock counter method to make the result more precise.

Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/gfx11: Adjust gfxoff before powergating on gfx11 as well

commit 11fbdda2ab6bf049e2869139c07016022b4e045b upstream.

(Bas: speculative change to mirror gfx10/gfx9)

Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/gfx10: Disable gfxoff before disabling powergating.

commit 8173cab3368a13cdc3cad0bd5cf14e9399b0f501 upstream.

Otherwise we get a full system lock (looks like a FW mess).

Copied the order from the GFX9 powergating code.

Fixes: 366468ff6c34 ("drm/amdgpu: Allow GfxOff on Vangogh as default")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2545
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/gmc11: implement get_vbios_fb_size()

commit 68518294d00da6a2433357af75a63abc6030676e upstream.

Implement get_vbios_fb_size() so we can properly reserve
the vbios splash screen to avoid potential artifacts on the
screen during the transition from the pre-OS console to the
OS console.

Acked-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: fix possible power mode mismatch between driver and PMFW

commit bf4823267a817f7c155876a125b94336d7113e77 upstream.

PMFW may boots the ASIC with a different power mode from the system's
real one. Notify PMFW explicitly the power mode the system in. This
is needed only when ACDC switch via gpio is not supported.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: force updating the msg pointer in non-split case

commit 4cafd0400bcb6187c0d4ab4d4b0229a89ac4f8c2 upstream.

When the MClientSnap reqeust's op is not CEPH_SNAP_OP_SPLIT the
request may still contain a list of 'split_realms', and we need
to skip it anyway. Or it will be parsed as a corrupt snaptrace.

Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/61200
Reported-by: Frank Schilder <frans@dtu.dk>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF

commit 8fb9ea65c9d1338b0d2bb0a9122dc942cdd32357 upstream.

After a call to console_unlock() in vcs_write() the vc_data struct can be
freed by vc_port_destruct(). Because of that, the struct vc_data pointer
must be reloaded in the while loop in vcs_write() after console_lock() to
avoid a UAF when vcs_size() is called.

Syzkaller reported a UAF in vcs_size().

BUG: KASAN: slab-use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215)
Read of size 4 at addr ffff8880beab89a8 by task repro_vcs_size/4119

Call Trace:
 <TASK>
__asan_report_load4_noabort (mm/kasan/report_generic.c:380)
vcs_size (drivers/tty/vt/vc_screen.c:215)
vcs_write (drivers/tty/vt/vc_screen.c:664)
vfs_write (fs/read_write.c:582 fs/read_write.c:564)
...
 <TASK>

Allocated by task 1213:
kmalloc_trace (mm/slab_common.c:1064)
vc_allocate (./include/linux/slab.h:559 ./include/linux/slab.h:680
    drivers/tty/vt/vt.c:1078 drivers/tty/vt/vt.c:1058)
con_install (drivers/tty/vt/vt.c:3334)
tty_init_dev (drivers/tty/tty_io.c:1303 drivers/tty/tty_io.c:1415
    drivers/tty/tty_io.c:1392)
tty_open (drivers/tty/tty_io.c:2082 drivers/tty/tty_io.c:2128)
chrdev_open (fs/char_dev.c:415)
do_dentry_open (fs/open.c:921)
vfs_open (fs/open.c:1052)
...

Freed by task 4116:
kfree (mm/slab_common.c:1016)
vc_port_destruct (drivers/tty/vt/vt.c:1044)
tty_port_destructor (drivers/tty/tty_port.c:296)
tty_port_put (drivers/tty/tty_port.c:312)
vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2))
vt_ioctl (drivers/tty/vt/vt_ioctl.c:903)
tty_ioctl (drivers/tty/tty_io.c:2778)
...

The buggy address belongs to the object at ffff8880beab8800
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 424 bytes inside of
 freed 1024-byte region [ffff8880beab8800, ffff8880beab8c00)

The buggy address belongs to the physical page:
page:00000000afc77580 refcount:1 mapcount:0 mapping:0000000000000000
    index:0x0 pfn:0xbeab8
head:00000000afc77580 order:3 entire_mapcount:0 nr_pages_mapped:0
    pincount:0
flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 000fffffc0010200 ffff888100042dc0 ffffea000426de00 dead000000000002
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880beab8880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880beab8900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880beab8980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                  ^
 ffff8880beab8a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880beab8a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint

Fixes: ac751efa6a0d ("console: rename acquire/release_console_sem() to console_lock/unlock()")
Cc: stable <stable@kernel.org>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/1683889728-10411-1-git-send-email-george.kennedy@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thunderbolt: Clear registers properly when auto clear isn't in use

commit c4af8e3fecd03b0aedcd38145955605cfebe7e3a upstream.

When `QUIRK_AUTO_CLEAR_INT` isn't set, interrupt masking should be
cleared by writing to Interrupt Mask Clear (IMR) and interrupt
status should be cleared properly at shutdown/init.

This fixes an error where interrupts are left enabled during resume
from hibernation with `CONFIG_USB4=y`.

Fixes: 468c49f44759 ("thunderbolt: Disable interrupt auto clear for rings")
Cc: stable@vger.kernel.org # v6.3
Reported-by: Takashi Iwai <tiwai@suse.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217343
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: qcom-geni: fix enabling deactivated interrupt

commit 5f949f140f73696f64acb89a1f16ff9153d017e0 upstream.

The driver have a race, experienced only with PREEMPT_RT patchset:

CPU0                         | CPU1
==================================================================
qcom_geni_serial_probe       |
  uart_add_one_port          |
                             | serdev_drv_probe
                             |   qca_serdev_probe
                             |     serdev_device_open
                             |       uart_open
                             |         uart_startup
                             |           qcom_geni_serial_startup
                             |             enable_irq
                             |               __irq_startup
                             |                 WARN_ON()
                             |                 IRQ not activated
  request_threaded_irq       |
    irq_domain_activate_irq  |

The warning:

  894000.serial: ttyHS1 at MMIO 0x894000 (irq = 144, base_baud = 0) is a MSM
  serial serial0: tty port ttyHS1 registered
  WARNING: CPU: 7 PID: 107 at kernel/irq/chip.c:241 __irq_startup+0x78/0xd8
  ...
  qcom_geni_serial 894000.serial: serial engine reports 0 RX bytes in!

Adding UART port triggers probe of child serial devices - serdev and
eventually Qualcomm Bluetooth hci_qca driver.  This opens UART port
which enables the interrupt before it got activated in
request_threaded_irq().  The issue originates in commit f3974413cf02
("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup") and discussion on
mailing list [1].  However the above commit does not explain why the
uart_add_one_port() is moved above requesting interrupt.

[1] https://lore.kernel.org/all/5d9f3dfa.1c69fb81.84c4b.30bf@mx.google.com/

Fixes: f3974413cf02 ("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup")
Cc: <stable@vger.kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230505152301.2181270-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_exar: Add support for USR298x PCI Modems

commit 95d698869b404772cc8b72560df71548491c10bc upstream.

Possibly the last PCI controller-based (i.e. not a soft/winmodem)
dial-up modem one can still buy.

Looks to have a stock XR17C154 PCI UART chip for communication, but for
some reason when provisioning the PCI IDs they swapped the vendor and
subvendor IDs. Otherwise this card would have worked out of the box.

Searching online, some folks seem to not have this issue and others do,
so it is possible only some batches of cards have this error.

Create a new macro to handle the switched IDs and add support here.

Signed-off-by: Andrew Davis <afd@ti.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230420160209.28221-1-afd@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: Add support for Advantech PCI-1611U card

commit d2b00516de0e1d696724247098f6733a6ea53908 upstream.

Add support for Advantech PCI-1611U card

Advantech provides opensource drivers for this and many others card
based on legacy copy of 8250_pci driver called adv950

https://www.advantech.com/emt/support/details/driver?id=1-TDOIMJ

It is hard to maintain to run as out of tree module on newer kernels.
Just adding PCI ID to kernel 8250_pci works perfect.

Signed-off-by: Vitaliy Tomin <tomin@iszf.irk.ru>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20230423034512.2671157-1-tomin@iszf.irk.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix zswap writeback race condition

commit 04fc7816089c5a32c29a04ec94b998e219dfb946 upstream.

The zswap writeback mechanism can cause a race condition resulting in
memory corruption, where a swapped out page gets swapped in with data that
was written to a different page.

The race unfolds like this:
1. a page with data A and swap offset X is stored in zswap
2. page A is removed off the LRU by zpool driver for writeback in
   zswap-shrink work, data for A is mapped by zpool driver
3. user space program faults and invalidates page entry A, offset X is
   considered free
4. kswapd stores page B at offset X in zswap (zswap could also be
   full, if so, page B would then be IOed to X, then skip step 5.)
5. entry A is replaced by B in tree->rbroot, this doesn't affect the
   local reference held by zswap-shrink work
6. zswap-shrink work writes back A at X, and frees zswap entry A
7. swapin of slot X brings A in memory instead of B

The fix:
Once the swap page cache has been allocated (case ZSWAP_SWAPCACHE_NEW),
zswap-shrink work just checks that the local zswap_entry reference is
still the same as the one in the tree.  If it's not the same it means that
it's either been invalidated or replaced, in both cases the writeback is
aborted because the local entry contains stale data.

Reproducer:
I originally found this by running `stress` overnight to validate my work
on the zswap writeback mechanism, it manifested after hours on my test
machine.  The key to make it happen is having zswap writebacks, so
whatever setup pumps /sys/kernel/debug/zswap/written_back_pages should do
the trick.

In order to reproduce this faster on a vm, I setup a system with ~100M of
available memory and a 500M swap file, then running `stress --vm 1
--vm-bytes 300000000 --vm-stride 4000` makes it happen in matter of tens
of minutes.  One can speed things up even more by swinging
/sys/module/zswap/parameters/max_pool_percent up and down between, say, 20
and 1; this makes it reproduce in tens of seconds.  It's crucial to set
`--vm-stride` to something other than 4096 otherwise `stress` won't
realize that memory has been corrupted because all pages would have the
same data.

Link: https://lkml.kernel.org/r/20230503151200.19707-1-cerasuolodomenico@gmail.com
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Chris Li (Google) <chrisl@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: make maple state reusable after mas_empty_area()

commit 0257d9908d38c0b1669af4bb1bc4dbca1f273fe6 upstream.

Make mas->min and mas->max point to a node range instead of a leaf entry
range.  This allows mas to still be usable after mas_empty_area() returns.
Users would get unexpected results from other operations on the maple
state after calling the affected function.

For example, x86 MAP_32BIT mmap() acts as if there is no suitable gap when
there should be one.

Link: https://lkml.kernel.org/r/20230505145829.74574-1-zhangpeng.00@bytedance.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reported-by: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com>
Reported-by: Tad <support@spotco.us>
Reported-by: Michael Keyes <mgkeyes@vigovproductions.net>
Link: https://lore.kernel.org/linux-mm/32f156ba80010fd97dbaf0a0cdfc84366608624d.camel@intel.com/
Link: https://lore.kernel.org/linux-mm/e6108286ac025c268964a7ead3aab9899f9bc6e9.camel@spotco.us/
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Tested-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

statfs: enforce statfs[64] structure initialization

commit ed40866ec7d328b3dfb70db7e2011640a16202c3 upstream.

s390's struct statfs and struct statfs64 contain padding, which
field-by-field copying does not set. Initialize the respective structs
with zeros before filling them and copying them to userspace, like it's
already done for the compat versions of these structs.

Found by KMSAN.

[agordeev@linux.ibm.com: fixed typo in patch description]
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20230504144021.808932-2-iii@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: Fix vcpu_array[0] races

commit afb2acb2e3a32e4d56f7fbd819769b98ed1b7520 upstream.

In kvm_vm_ioctl_create_vcpu(), add vcpu to vcpu_array iff it's safe to
access vcpu via kvm_get_vcpu() and kvm_for_each_vcpu(), i.e. when there's
no failure path requiring vcpu removal and destruction. Such order is
important because vcpu_array accessors may end up referencing vcpu at
vcpu_array[0] even before online_vcpus is set to 1.

When online_vcpus=0, any call to kvm_get_vcpu() goes through
array_index_nospec() and ends with an attempt to xa_load(vcpu_array, 0):

int num_vcpus = atomic_read(&kvm->online_vcpus);
i = array_index_nospec(i, num_vcpus);
return xa_load(&kvm->vcpu_array, i);

Similarly, when online_vcpus=0, a kvm_for_each_vcpu() does not iterate over
an "empty" range, but actually [0, ULONG_MAX]:

xa_for_each_range(&kvm->vcpu_array, idx, vcpup, 0, \
  (atomic_read(&kvm->online_vcpus) - 1))

In both cases, such online_vcpus=0 edge case, even if leading to
unnecessary calls to XArray API, should not be an issue; requesting
unpopulated indexes/ranges is handled by xa_load() and xa_for_each_range().

However, this means that when the first vCPU is created and inserted in
vcpu_array *and* before online_vcpus is incremented, code calling
kvm_get_vcpu()/kvm_for_each_vcpu() already has access to that first vCPU.

This should not pose a problem assuming that once a vcpu is stored in
vcpu_array, it will remain there, but that's not the case:
kvm_vm_ioctl_create_vcpu() first inserts to vcpu_array, then requests a
file descriptor. If create_vcpu_fd() fails, newly inserted vcpu is removed
from the vcpu_array, then destroyed:

vcpu->vcpu_idx = atomic_read(&kvm->online_vcpus);
r = xa_insert(&kvm->vcpu_array, vcpu->vcpu_idx, vcpu, GFP_KERNEL_ACCOUNT);
kvm_get_kvm(kvm);
r = create_vcpu_fd(vcpu);
if (r < 0) {
xa_erase(&kvm->vcpu_array, vcpu->vcpu_idx);
kvm_put_kvm_no_destroy(kvm);
goto unlock_vcpu_destroy;
}
atomic_inc(&kvm->online_vcpus);

This results in a possible race condition when a reference to a vcpu is
acquired (via kvm_get_vcpu() or kvm_for_each_vcpu()) moments before said
vcpu is destroyed.

Signed-off-by: Michal Luczaj <mhal@rbox.co>
Message-Id: <20230510140410.1093987-2-mhal@rbox.co>
Cc: stable@vger.kernel.org
Fixes: c5b077549136 ("KVM: Convert the kvm->vcpus array to a xarray", 2021-12-08)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix global-out-of-bounds in smb2_find_context_vals

commit 02f76c401d17e409ed45bf7887148fcc22c93c85 upstream.

Add tag_len argument in smb2_find_context_vals() to avoid out-of-bound
read when create_context's name_len is larger than tag length.

[    7.995411] ==================================================================
[    7.995866] BUG: KASAN: global-out-of-bounds in memcmp+0x83/0xa0
[    7.996248] Read of size 8 at addr ffffffff8258d940 by task kworker/0:0/7
...
[    7.998191] Call Trace:
[    7.998358]  <TASK>
[    7.998503]  dump_stack_lvl+0x33/0x50
[    7.998743]  print_report+0xcc/0x620
[    7.999458]  kasan_report+0xae/0xe0
[    7.999895]  kasan_check_range+0x35/0x1b0
[    8.000152]  memcmp+0x83/0xa0
[    8.000347]  smb2_find_context_vals+0xf7/0x1e0
[    8.000635]  smb2_open+0x1df2/0x43a0
[    8.006398]  handle_ksmbd_work+0x274/0x810
[    8.006666]  process_one_work+0x419/0x760
[    8.006922]  worker_thread+0x2a2/0x6f0
[    8.007429]  kthread+0x160/0x190
[    8.007946]  ret_from_fork+0x1f/0x30
[    8.008181]  </TASK>

Cc: stable@vger.kernel.org
Signed-off-by: Chih-Yen Chang <cc85nod@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix wrong UserName check in session_user

commit f0a96d1aafd8964e1f9955c830a3e5cb3c60a90f upstream.

The offset of UserName is related to the address of security
buffer. To ensure the validaty of UserName, we need to compare name_off
+ name_len with secbuf_len instead of auth_msg_len.

[   27.096243] ==================================================================
[   27.096890] BUG: KASAN: slab-out-of-bounds in smb_strndup_from_utf16+0x188/0x350
[   27.097609] Read of size 2 at addr ffff888005e3b542 by task kworker/0:0/7
...
[   27.099950] Call Trace:
[   27.100194]  <TASK>
[   27.100397]  dump_stack_lvl+0x33/0x50
[   27.100752]  print_report+0xcc/0x620
[   27.102305]  kasan_report+0xae/0xe0
[   27.103072]  kasan_check_range+0x35/0x1b0
[   27.103757]  smb_strndup_from_utf16+0x188/0x350
[   27.105474]  smb2_sess_setup+0xaf8/0x19c0
[   27.107935]  handle_ksmbd_work+0x274/0x810
[   27.108315]  process_one_work+0x419/0x760
[   27.108689]  worker_thread+0x2a2/0x6f0
[   27.109385]  kthread+0x160/0x190
[   27.110129]  ret_from_fork+0x1f/0x30
[   27.110454]  </TASK>

Cc: stable@vger.kernel.org
Signed-off-by: Chih-Yen Chang <cc85nod@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: allocate one more byte for implied bcc[0]

commit 443d61d1fa9faa60ef925513d83742902390100f upstream.

ksmbd_smb2_check_message allows client to return one byte more, so we
need to allocate additional memory in ksmbd_conn_handler_loop to avoid
out-of-bound access.

Cc: stable@vger.kernel.org
Signed-off-by: Chih-Yen Chang <cc85nod@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: smb2: Allow messages padded to 8byte boundary

commit e7b8b8ed9960bf699bf4029f482d9e869c094ed6 upstream.

clc length is now accepted to <= 8 less than length,
rather than < 8.

Solve issues on some of Axis's smb clients which send
messages where clc length is 8 bytes less than length.

The specific client was running kernel 4.19.217 with
smb dialect 3.0.2 on armv7l.

Cc: stable@vger.kernel.org
Signed-off-by: Gustav Johansson <gustajo@axis.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SMB3: drop reference to cfile before sending oplock break

commit 59a556aebc43dded08535fe97d94ca3f657915e4 upstream.

In cifs_oplock_break function we drop reference to a cfile at
the end of function, due to which close command goes on wire
after lease break acknowledgment even if file is already closed
by application but we had deferred the handle close.
If other client with limited file shareaccess waiting on lease
break ack proceeds operation on that file as soon as first client
sends ack, then we may encounter status sharing violation error
because of open handle.
Solution is to put reference to cfile(send close on wire if last ref)
and then send oplock acknowledgment to server.

Fixes: 9e31678fb403 ("SMB3: fix lease break timeout when multiple deferred close handles for the same file.")
Cc: stable@kernel.org
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SMB3: Close all deferred handles of inode in case of handle lease break

commit 47592fa8eb03742048b096b4696ec133384c45eb upstream.

Oplock break may occur for different file handle than the deferred
handle. Check for inode deferred closes list, if it's not empty then
close all the deferred handles of inode because we should not cache
handles if we dont have handle lease.

Eg: If openfilelist has one deferred file handle and another open file
handle from app for a same file, then on a lease break we choose the
first handle in openfile list. The first handle in list can be deferred
handle or actual open file handle from app. In case if it is actual open
handle then today, we don't close deferred handles if we lose handle lease
on a file. Problem with this is, later if app decides to close the existing
open handle then we still be caching deferred handles until deferred close
timeout. Leaving open handle may result in sharing violation when windows
client tries to open a file with limited file share access.

So we should check for deferred list of inode and walk through the list of
deferred files in inode and close all deferred files.

Fixes: 9e31678fb403 ("SMB3: fix lease break timeout when multiple deferred close handles for the same file.")
Cc: stable@kernel.org
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: rtw88: use work to update rate to avoid RCU warning

commit bcafcb959a57a6890e900199690c5fc47da1a304 upstream.

The ieee80211_ops::sta_rc_update must be atomic, because
ieee80211_chan_bw_change() holds rcu_read lock while calling
drv_sta_rc_update(), so create a work to do original things.

 Voluntary context switch within RCU read-side critical section!
 WARNING: CPU: 0 PID: 4621 at kernel/rcu/tree_plugin.h:318
 rcu_note_context_switch+0x571/0x5d0
 CPU: 0 PID: 4621 Comm: kworker/u16:2 Tainted: G        W  OE
 Workqueue: phy3 ieee80211_chswitch_work [mac80211]
 RIP: 0010:rcu_note_context_switch+0x571/0x5d0
 Call Trace:
  <TASK>
  __schedule+0xb0/0x1460
  ? __mod_timer+0x116/0x360
  schedule+0x5a/0xc0
  schedule_timeout+0x87/0x150
  ? trace_raw_output_tick_stop+0x60/0x60
  wait_for_completion_timeout+0x7b/0x140
  usb_start_wait_urb+0x82/0x160 [usbcore
  usb_control_msg+0xe3/0x140 [usbcore
  rtw_usb_read+0x88/0xe0 [rtw_usb
  rtw_usb_read8+0xf/0x10 [rtw_usb
  rtw_fw_send_h2c_command+0xa0/0x170 [rtw_core
  rtw_fw_send_ra_info+0xc9/0xf0 [rtw_core
  drv_sta_rc_update+0x7c/0x160 [mac80211
  ieee80211_chan_bw_change+0xfb/0x110 [mac80211
  ieee80211_change_chanctx+0x38/0x130 [mac80211
  ieee80211_vif_use_reserved_switch+0x34e/0x900 [mac80211
  ieee80211_link_use_reserved_context+0x88/0xe0 [mac80211
  ieee80211_chswitch_work+0x95/0x170 [mac80211
  process_one_work+0x201/0x410
  worker_thread+0x4a/0x3b0
  ? process_one_work+0x410/0x410
  kthread+0xe1/0x110
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x1f/0x30
  </TASK>

Cc: stable@vger.kernel.org
Fixes: c1edc86472fc ("rtw88: add ieee80211:sta_rc_update ops")
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/linux-wireless/f1e31e8e-f84e-3791-50fb-663a83c5c6e9@lwfinger.net/T/#t
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230508085429.46653-1-pkshih@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_pciefd: Disable interrupts in probe error path

commit 11164bc39459335ab93c6e99d53b7e4292fba38b upstream.

Disable interrupts in error path of probe function.

Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-7-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_pciefd: Do not send EFLUSH command on TFD interrupt

commit 262d7a52ba27525e3c1203230c9f0524e48bbb34 upstream.

Under certain circumstances we send two EFLUSH commands, resulting in two
EFLUSH ack packets, while only expecting a single EFLUSH ack.
This can cause the driver Tx flush completion to get out of sync.

To avoid this problem, don't enable the "Transmit buffer flush done" (TFD)
interrupt and remove the code handling it.
Now we only send EFLUSH command after receiving status packet with
"Init detected" (IDET) bit set.

Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-6-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_pciefd: Clear listen-only bit if not explicitly requested

commit bf7ac55e991ca177f1ac16be51152f1ef291a4df upstream.

The listen-only bit was never cleared, causing the controller to
always use listen-only mode, if previously set.

Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-3-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_pciefd: Empty SRB buffer in probe

commit c589557dd1426f5adf90c7a919d4fde5a3e4ef64 upstream.

Empty the "Shared receive buffer" (SRB) in probe, to assure we start in a
known state, and don't process any irrelevant packets.

Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-5-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_pciefd: Call request_irq() before enabling interrupts

commit 84762d8da89d29ba842317eb842973e628c27391 upstream.

Make sure the interrupt handler is registered before enabling interrupts.

Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-4-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_pciefd: Set CAN_STATE_STOPPED in kvaser_pciefd_stop()

commit aed0e6ca7dbb8fbea9bc69c9ac663d5533c8c5d8 upstream.

Set can.state to CAN_STATE_STOPPED in kvaser_pciefd_stop().
Without this fix, wrong CAN state was repported after the interface was
brought down.

Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-2-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: isotp: recvmsg(): allow MSG_CMSG_COMPAT flag

commit db2773d65b02aed319a93efdfb958087771d4e19 upstream.

The control message provided by isotp support MSG_CMSG_COMPAT but
blocked recvmsg() syscalls that have set this flag, i.e. on 32bit user
space on 64 bit kernels.

Link: https://github.com/hartkopp/can-isotp/issues/59
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Fixes: 42bf50a1795a ("can: isotp: support MSG_TRUNC flag when reading from socket")
Link: https://lore.kernel.org/20230505110308.81087-2-mkl@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: j1939: recvmsg(): allow MSG_CMSG_COMPAT flag

commit 1db080cbdbab28752bbb1c86d64daf96253a5da1 upstream.

The control message provided by J1939 support MSG_CMSG_COMPAT but
blocked recvmsg() syscalls that have set this flag, i.e. on 32bit user
space on 64 bit kernels.

Link: https://github.com/hartkopp/can-isotp/issues/59
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/20230505110308.81087-3-mkl@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Fix mute and micmute LEDs for yet another HP laptop

commit 9dc68a4fe70893b000fb3c92c68b9f72369cf448 upstream.

There's yet another laptop that needs the fixup to enable mute and
micmute LEDs. So do it accordingly.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230512083417.157127-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for HP EliteBook G10 laptops

commit 3e10f6ca76c4d00019badebd235c9d7f0068261e upstream.

Add support for HP EliteBook 835/845/845W/865 G10 laptops
with CS35L41 amplifiers on I2C/SPI bus connected to Realtek codec.

Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230510142227.32945-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for 2nd ASUS GU603

commit a4671b7fba59775845ee60cfbdfc4ba64300211b upstream.

Add quirk for GU603 with 0x1c62 variant of codec.

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230505235824.49607-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add a quirk for HP EliteDesk 805

commit 90670ef774a8b6700c38ce1222e6aa263be54d5f upstream.

Add a quirk for HP EliteDesk 805 to fixup ALC3867 headset MIC no sound.

Signed-off-by: Ai Chao <aichao@kylinos.cn>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230506022653.2074343-1-aichao@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for Clevo L140AU

commit 0a6b36c5dc3dda0196f4fb65bdb34c38b8d060c3 upstream.

Fixes headset detection on Clevo L140AU.

Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230505163651.21257-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Add NVIDIA codec IDs a3 through a7 to patch table

commit dc4f2ccaedddb489a83e7b12ebbdc347272aacc9 upstream.

These IDs are for AD102, AD103, AD104, AD106, and AD107 gpus with
audio functions that are largely similar to the existing ones.

Tested audio using gnome-settings, over HDMI, DP-SST and DP-MST
connections on AD106 gpu.

Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230517090736.15088-1-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Fix Oops by 9.1 surround channel names

commit 3b44ec8c5c44790a82f07e90db45643c762878c6 upstream.

get_line_out_pfx() may trigger an Oops by overflowing the static array
with more than 8 channels.  This was reported for MacBookPro 12,1 with
Cirrus codec.

As a workaround, extend for the 9.1 channels and also fix the
potential Oops by unifying the code paths accessing the same array
with the proper size check.

Reported-by: Olliver Schinagl <oliver@schinagl.nl>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/64d95eb0-dbdb-cff8-a8b1-988dc22b24cd@schinagl.nl
Link: https://lore.kernel.org/r/20230516184412.24078-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fix incorrect tracking of free space on transfer rings

commit fe82f16aafdaf8002281d3b9524291d4a4a28460 upstream.

This incorrect tracking caused unnecessary ring expansion in some
usecases which over days of use consume a lot of memory.

xhci driver tries to keep track of free transfer blocks (TRBs) on the
ring buffer, but failed to add back some cancelled transfers that were
turned into no-op operations instead of just moving past them.

This can happen if there are several queued pending transfers which
then are cancelled in reverse order.

Solve this by counting the numer of steps we move the dequeue pointer
once we complete a transfer, and add it to the number of free trbs
instead of just adding the trb number of the current transfer.
This way we ensure we count the no-op trbs on the way as well.

Fixes: 55f6153d8cc8 ("xhci: remove extra loop in interrupt context")
Cc: stable@vger.kernel.org
Reported-by: Miller Hunter <MillerH@hearthnhome.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217242
Tested-by: Miller Hunter <MillerH@hearthnhome.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230515134059.161110-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci-pci: Only run d3cold avoidance quirk for s2idle

commit 2a821fc3136d5d99dcb9de152be8a052ca27d870 upstream.

Donghun reports that a notebook that has an AMD Ryzen 5700U but supports
S3 has problems with USB after resuming from suspend. The issue was
bisected down to commit d1658268e439 ("usb: pci-quirks: disable D3cold on
xhci suspend for s2idle on AMD Renoir").

As this issue only happens on S3, narrow the broken D3cold quirk to only
run in s2idle.

Fixes: d1658268e439 ("usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir")
Reported-and-tested-by: Donghun Yoon <donghun.yoon@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230515134059.161110-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: gadget: udc: core: Invoke usb_gadget_connect only when started"

commit f22e9b67f19ccc73de1ae04375d4b30684e261f8 upstream.

This reverts commit 0db213ea8eed5534a5169e807f28103cbc9d23df.

It introduces an issues with configuring the USB gadget hangs forever
on multiple Qualcomm and NXP i.MX SoC at least.

Cc: stable@vger.kernel.org
Fixes: 0db213ea8eed ("usb: gadget: udc: core: Invoke usb_gadget_connect only when started")
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/all/ZF4BvgsOyoKxdPFF@francesco-nb.int.toradex.com/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230512131435.205464-3-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: gadget: udc: core: Prevent redundant calls to pullup"

commit 5e1617210aede9f1b91bb9819c93097b6da481f9 upstream.

This reverts commit a3afbf5cc887fc3401f012fe629810998ed61859.

This depends on commit 0db213ea8eed ("usb: gadget: udc: core: Invoke
usb_gadget_connect only when started") that introduces a regression,
revert it till the issue is fixed.

Cc: stable@vger.kernel.org
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/all/ZF4BvgsOyoKxdPFF@francesco-nb.int.toradex.com/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230512131435.205464-2-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: altmodes/displayport: fix pin_assignment_show

commit d8f28269dd4bf9b55c3fb376ae31512730a96fce upstream.

This patch fixes negative indexing of buf array in pin_assignment_show
when get_current_pin_assignments returns 0 i.e. no compatible pin
assignments are found.

BUG: KASAN: use-after-free in pin_assignment_show+0x26c/0x33c
...
Call trace:
dump_backtrace+0x110/0x204
dump_stack_lvl+0x84/0xbc
print_report+0x358/0x974
kasan_report+0x9c/0xfc
__do_kernel_fault+0xd4/0x2d4
do_bad_area+0x48/0x168
do_tag_check_fault+0x24/0x38
do_mem_abort+0x6c/0x14c
el1_abort+0x44/0x68
el1h_64_sync_handler+0x64/0xa4
el1h_64_sync+0x78/0x7c
pin_assignment_show+0x26c/0x33c
dev_attr_show+0x50/0xc0

Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230508214443.893436-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: u_ether: Fix host MAC address case

commit 3c0f4f09c063e143822393d99cb2b19a85451c07 upstream.

The CDC-ECM specification [1] requires to send the host MAC address as
an uppercase hexadecimal string in chapter "5.4 Ethernet Networking
Functional Descriptor":
    The Unicode character is chosen from the set of values 30h through
    39h and 41h through 46h (0-9 and A-F).

However, snprintf(.., "%pm", ..) generates a lowercase MAC address
string. While most host drivers are tolerant to this, UsbNcm.sys on
Windows 10 is not. Instead it uses a different MAC address with all
bytes set to zero including and after the first byte containing a
lowercase letter. On Windows 11 Microsoft fixed it, but apparently they
did not backport the fix.

This change fixes the issue by upper-casing the MAC to comply with the
specification.

[1]: https://www.usb.org/document-library/class-definitions-communication-devices-12, file ECM120.pdf

Fixes: bcd4a1c40bee ("usb: gadget: u_ether: construct with default values and add setters/getters")
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Gräfe <k.graefe@gateware.de>
Link: https://lore.kernel.org/r/20230505143640.443014-1-k.graefe@gateware.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: debugfs: Resume dwc3 before accessing registers

commit 614ce6a2ea50068b45339257891e51e639ac9001 upstream.

When the dwc3 device is runtime suspended, various required clocks are in
disabled state and it is not guaranteed that access to any registers would
work. Depending on the SoC glue, a register read could be as benign as
returning 0 or be fatal enough to hang the system.

In order to prevent such scenarios of fatal errors, make sure to resume
dwc3 then allow the function to proceed.

Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable@vger.kernel.org #3.2: 30332eeefec8: debugfs: regset32: Add Runtime PM support
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230509144836.6803-1-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume()

commit c8540870af4ce6ddeb27a7bb5498b75fb29b643c upstream.

Prevent -ETIMEDOUT error on .suspend().
e.g. If gadget driver is loaded and we are connected to a USB host,
all transfers must be stopped before stopping the controller else
we will not get a clean stop i.e. dwc3_gadget_run_stop() will take
several seconds to complete and will return -ETIMEDOUT.

Handle error cases properly in dwc3_gadget_suspend().
Simplify dwc3_gadget_resume() by using the introduced helper function.

Fixes: 9f8a67b65a49 ("usb: dwc3: gadget: fix gadget suspend/resume")
Cc: stable@vger.kernel.org
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230503110048.30617-1-rogerq@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: UHCI: adjust zhaoxin UHCI controllers OverCurrent bit value

commit dddb342b5b9e482bb213aecc08cbdb201ea4f8da upstream.

OverCurrent condition is not standardized in the UHCI spec.
Zhaoxin UHCI controllers report OverCurrent bit active off.
In order to handle OverCurrent condition correctly, the uhci-hcd
driver needs to be told to expect the active-off behavior.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230423105952.4526-1-WeitaoWang-oc@zhaoxin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb-storage: fix deadlock when a scsi command timeouts more than once

commit a398d5eac6984316e71474e25b975688f282379b upstream.

With faulty usb-storage devices, read/write can timeout, in that case
the SCSI layer will abort and re-issue the command. USB storage has no
internal timeout, it relies on SCSI layer aborting commands via
.eh_abort_handler() for non those responsive devices.

After two consecutive timeouts of the same command, SCSI layer calls
.eh_device_reset_handler(), without calling .eh_abort_handler() first.

With usb-storage, this causes a deadlock:

  -> .eh_device_reset_handler
    -> device_reset
      -> mutex_lock(&(us->dev_mutex));

mutex already by usb_stor_control_thread(), which is waiting for
command completion:

  -> usb_stor_control_thread (mutex taken here)
    -> usb_stor_invoke_transport
      -> usb_stor_Bulk_transport
        -> usb_stor_bulk_srb
  -> usb_stor_bulk_transfer_sglist
    -> usb_sg_wait

Make sure we cancel any pending command in .eh_device_reset_handler()
to avoid this.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Cc: linux-usb@vger.kernel.org
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/all/ZEllnjMKT8ulZbJh@sakura/
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230505114759.1189741-1-mbizon@freebox.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: usbtmc: Fix direction for 0-length ioctl control messages

commit 94d25e9128988c6a1fc9070f6e98215a95795bd8 upstream.

The syzbot fuzzer found a problem in the usbtmc driver: When a user
submits an ioctl for a 0-length control transfer, the driver does not
check that the direction is set to OUT:

------------[ cut here ]------------
usb 3-1: BOGUS control dir, pipe 80000b80 doesn't match bRequestType fd
WARNING: CPU: 0 PID: 5100 at drivers/usb/core/urb.c:411 usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
Modules linked in:
CPU: 0 PID: 5100 Comm: syz-executor428 Not tainted 6.3.0-syzkaller-12049-g58390c8ce1bd #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023
RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
Code: 7c 24 40 e8 1b 13 5c fb 48 8b 7c 24 40 e8 21 1d f0 fe 45 89 e8 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 e0 b5 fc 8a e8 19 c8 23 fb <0f> 0b e9 9f ee ff ff e8 ed 12 5c fb 0f b6 1d 12 8a 3c 08 31 ff 41
RSP: 0018:ffffc90003d2fb00 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8880789e9058 RCX: 0000000000000000
RDX: ffff888029593b80 RSI: ffffffff814c1447 RDI: 0000000000000001
RBP: ffff88801ea742f8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88802915e528
R13: 00000000000000fd R14: 0000000080000b80 R15: ffff8880222b3100
FS:  0000555556ca63c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f9ef4d18150 CR3: 0000000073e5b000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58
 usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
 usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153
 usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1954 [inline]
 usbtmc_ioctl+0x1b3d/0x2840 drivers/usb/class/usbtmc.c:2097

To fix this, we must override the direction in the bRequestType field
of the control request structure when the length is 0.

Reported-and-tested-by: syzbot+ce77725b89b7bd52425c@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/linux-usb/000000000000716a3705f9adb8ee@google.com/
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ede1ee02-b718-49e7-a44c-51339fec706b@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add a sample rate workaround for Line6 Pod Go

commit 359b4315471181f108723c61612d96e383e56179 upstream.

Line6 Pod Go (0e41:424b) requires the similar workaround for the fixed
48k sample rate like other Line6 models.  This patch adds the
corresponding entry to line6_parse_audio_format_rate_quirk().

Reported-by: John Humlick <john@humlick.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230512075858.22813-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bridge: always declare tunnel functions

[ Upstream commit 89dcd87ce534a3a7f267cfd58505803006f51301 ]

When CONFIG_BRIDGE_VLAN_FILTERING is disabled, two functions are still
defined but have no prototype or caller. This causes a W=1 warning for
the missing prototypes:

net/bridge/br_netlink_tunnel.c:29:6: error: no previous prototype for 'vlan_tunid_inrange' [-Werror=missing-prototypes]
net/bridge/br_netlink_tunnel.c:199:5: error: no previous prototype for 'br_vlan_tunnel_info' [-Werror=missing-prototypes]

The functions are already contitional on CONFIG_BRIDGE_VLAN_FILTERING,
and I coulnd't easily figure out the right set of #ifdefs, so just
move the declarations out of the #ifdef to avoid the warning,
at a small cost in code size over a more elaborate fix.

Fixes: 188c67dd1906 ("net: bridge: vlan options: add support for tunnel id dumping")
Fixes: 569da0822808 ("net: bridge: vlan options: add support for tunnel mapping set/del")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230516194625.549249-3-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_set_rbtree: fix null deref on element insertion

[ Upstream commit 61ae320a29b0540c16931816299eb86bf2b66c08 ]

There is no guarantee that rb_prev() will not return NULL in nft_rbtree_gc_elem():

general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
 nft_add_set_elem+0x14b0/0x2990
  nf_tables_newsetelem+0x528/0xb30

Furthermore, there is a possible use-after-free while iterating,
'node' can be free'd so we need to cache the next value to use.

Fixes: c9e6978e2725 ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: fix nft_trans type confusion

[ Upstream commit e3c361b8acd636f5fe80c02849ca175201edf10c ]

nft_trans_FOO objects all share a common nft_trans base structure, but
trailing fields depend on the real object size. Access is only safe after
trans->msg_type check.

Check for rule type first.  Found by code inspection.

Fixes: 1a94e38d254b ("netfilter: nf_tables: add NFTA_RULE_ID attribute")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: selftests: Fix optstring

[ Upstream commit 9ba9485b87ac97fd159abdb4cbd53099bc9f01c6 ]

The cited commit added a stray colon to the 'v' option. That makes the
option work incorrectly.

ex:
tools/testing/selftests/net# ./fib_nexthops.sh -v
(should enable verbose mode, instead it shows help text due to missing arg)

Fixes: 5feba4727395 ("selftests: fib_nexthops: Make ping timeout configurable")
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: pcs: xpcs: fix C73 AN not getting enabled

[ Upstream commit c46e78ba9a7a09da4f192dc8df15c4e8a07fb9e0 ]

The XPCS expects clause 73 (copper backplane) autoneg to follow the
ethtool autoneg bit. It actually did that until the blamed
commit inaptly replaced state->an_enabled (coming from ethtool) with
phylink_autoneg_inband() (coming from the device tree or struct
phylink_config), as part of an unrelated phylink_pcs API conversion.

Russell King suggests that state->an_enabled from the original code was
just a proxy for the ethtool Autoneg bit, and that the correct way of
restoring the functionality is to check for this bit in the advertising
mask.

Fixes: 11059740e616 ("net: pcs: xpcs: convert to phylink_pcs_ops")
Link: https://lore.kernel.org/netdev/ZGNt2MFeRolKGFck@shell.armlinux.org.uk/
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: wwan: iosm: fix NULL pointer dereference when removing device

[ Upstream commit 60829145f1e2650b31ebe6a0ec70a9725b38fa2c ]

In suspend and resume cycle, the removal and rescan of device ends
up in NULL pointer dereference.

During driver initialization, if the ipc_imem_wwan_channel_init()
fails to get the valid device capabilities it returns an error and
further no resource (wwan struct) will be allocated. Now in this
situation if driver removal procedure is initiated it would result
in NULL pointer exception since unallocated wwan struct is dereferenced
inside ipc_wwan_deinit().

ipc_imem_run_state_worker() to handle the called functions return value
and to release the resource in failure case. It also reports the link
down event in failure cases. The user space application can handle this
event to do a device reset for restoring the device communication.

Fixes: 3670970dd8c6 ("net: iosm: shared memory IPC interface")
Reported-by: Samuel Wein PhD <sam@samwein.com>
Closes: https://lore.kernel.org/netdev/20230427140819.1310f4bd@kernel.org/T/
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit()

[ Upstream commit dacab578c7c6cd06c50c89dfa36b0e0f10decd4e ]

syzbot triggered the following splat [1], sending an empty message
through pppoe_sendmsg().

When VLAN_FLAG_REORDER_HDR flag is set, vlan_dev_hard_header()
does not push extra bytes for the VLAN header, because vlan is offloaded.

Unfortunately vlan_dev_hard_start_xmit() first reads veth->h_vlan_proto
before testing (vlan->flags & VLAN_FLAG_REORDER_HDR).

We need to swap the two conditions.

[1]
BUG: KMSAN: uninit-value in vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111
vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111
__netdev_start_xmit include/linux/netdevice.h:4883 [inline]
netdev_start_xmit include/linux/netdevice.h:4897 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x253/0xa20 net/core/dev.c:3596
__dev_queue_xmit+0x3c7f/0x5ac0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3053 [inline]
pppoe_sendmsg+0xa93/0xb80 drivers/net/ppp/pppoe.c:900
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0xa24/0xe40 net/socket.c:2501
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555
__sys_sendmmsg+0x411/0xa50 net/socket.c:2641
__do_sys_sendmmsg net/socket.c:2670 [inline]
__se_sys_sendmmsg net/socket.c:2667 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Uninit was created at:
slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:774
slab_alloc_node mm/slub.c:3452 [inline]
kmem_cache_alloc_node+0x543/0xab0 mm/slub.c:3497
kmalloc_reserve+0x148/0x470 net/core/skbuff.c:520
__alloc_skb+0x3a7/0x850 net/core/skbuff.c:606
alloc_skb include/linux/skbuff.h:1277 [inline]
sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2583
pppoe_sendmsg+0x3af/0xb80 drivers/net/ppp/pppoe.c:867
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0xa24/0xe40 net/socket.c:2501
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555
__sys_sendmmsg+0x411/0xa50 net/socket.c:2641
__do_sys_sendmmsg net/socket.c:2670 [inline]
__se_sys_sendmmsg net/socket.c:2667 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

CPU: 0 PID: 29770 Comm: syz-executor.0 Not tainted 6.3.0-rc6-syzkaller-gc478e5b17829 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igb: fix bit_shift to be in [1..8] range

[ Upstream commit 60d758659f1fb49e0d5b6ac2691ede8c0958795b ]

In igb_hash_mc_addr() the expression:
        "mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]"
shift by more than 7 bits always yields zero, so hash becomes not so different.
Add initialization with bit_shift = 1 and add a loop condition to ensure
bit_shift will be always in [1..8] range.

Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offset

[ Upstream commit 1323e0c6e1d7e103d59384c3ac50f72b17a6936c ]

According to datasheet, the command opcode must be specified
into bits [14:12] of the Extended Port Control register (EPC).

Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marco Migliore <m.migliore@tiesse.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cassini: Fix a memory leak in the error handling path of cas_init_one()

[ Upstream commit 412cd77a2c24b191c65ea53025222418db09817c ]

cas_saturn_firmware_init() allocates some memory using vmalloc(). This
memory is freed in the .remove() function but not it the error handling
path of the probe.

Add the missing vfree() to avoid a memory leak, should an error occur.

Fixes: fcaa40669cd7 ("cassini: use request_firmware")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tun: Fix memory leak for detached NAPI queue.

[ Upstream commit 82b2bc279467c875ec36f8ef820f00997c2a4e8e ]

syzkaller reported [0] memory leaks of sk and skb related to the TUN
device with no repro, but we can reproduce it easily with:

  struct ifreq ifr = {}
  int fd_tun, fd_tmp;
  char buf[4] = {};

  fd_tun = openat(AT_FDCWD, "/dev/net/tun", O_WRONLY, 0);
  ifr.ifr_flags = IFF_TUN | IFF_NAPI | IFF_MULTI_QUEUE;
  ioctl(fd_tun, TUNSETIFF, &ifr);

  ifr.ifr_flags = IFF_DETACH_QUEUE;
  ioctl(fd_tun, TUNSETQUEUE, &ifr);

  fd_tmp = socket(AF_PACKET, SOCK_PACKET, 0);
  ifr.ifr_flags = IFF_UP;
  ioctl(fd_tmp, SIOCSIFFLAGS, &ifr);

  write(fd_tun, buf, sizeof(buf));
  close(fd_tun);

If we enable NAPI and multi-queue on a TUN device, we can put skb into
tfile->sk.sk_write_queue after the queue is detached.  We should prevent
it by checking tfile->detached before queuing skb.

Note this must be done under tfile->sk.sk_write_queue.lock because write()
and ioctl(IFF_DETACH_QUEUE) can run concurrently.  Otherwise, there would
be a small race window:

  write()                             ioctl(IFF_DETACH_QUEUE)
  `- tun_get_user                     `- __tun_detach
     |- if (tfile->detached)             |- tun_disable_queue
     |  `-> false                        |  `- tfile->detached = tun
     |                                   `- tun_queue_purge
     |- spin_lock_bh(&queue->lock)
     `- __skb_queue_tail(queue, skb)

Another solution is to call tun_queue_purge() when closing and
reattaching the detached queue, but it could paper over another
problems.  Also, we do the same kind of test for IFF_NAPI_FRAGS.

[0]:
unreferenced object 0xffff88801edbc800 (size 2048):
  comm "syz-executor.1", pid 33269, jiffies 4295743834 (age 18.756s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00  ...@............
  backtrace:
    [<000000008c16ea3d>] __do_kmalloc_node mm/slab_common.c:965 [inline]
    [<000000008c16ea3d>] __kmalloc+0x4a/0x130 mm/slab_common.c:979
    [<000000003addde56>] kmalloc include/linux/slab.h:563 [inline]
    [<000000003addde56>] sk_prot_alloc+0xef/0x1b0 net/core/sock.c:2035
    [<000000003e20621f>] sk_alloc+0x36/0x2f0 net/core/sock.c:2088
    [<0000000028e43843>] tun_chr_open+0x3d/0x190 drivers/net/tun.c:3438
    [<000000001b0f1f28>] misc_open+0x1a6/0x1f0 drivers/char/misc.c:165
    [<000000004376f706>] chrdev_open+0x111/0x300 fs/char_dev.c:414
    [<00000000614d379f>] do_dentry_open+0x2f9/0x750 fs/open.c:920
    [<000000008eb24774>] do_open fs/namei.c:3636 [inline]
    [<000000008eb24774>] path_openat+0x143f/0x1a30 fs/namei.c:3791
    [<00000000955077b5>] do_filp_open+0xce/0x1c0 fs/namei.c:3818
    [<00000000b78973b0>] do_sys_openat2+0xf0/0x260 fs/open.c:1356
    [<00000000057be699>] do_sys_open fs/open.c:1372 [inline]
    [<00000000057be699>] __do_sys_openat fs/open.c:1388 [inline]
    [<00000000057be699>] __se_sys_openat fs/open.c:1383 [inline]
    [<00000000057be699>] __x64_sys_openat+0x83/0xf0 fs/open.c:1383
    [<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80
    [<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc

unreferenced object 0xffff88802f671700 (size 240):
  comm "syz-executor.1", pid 33269, jiffies 4295743854 (age 18.736s)
  hex dump (first 32 bytes):
    68 c9 db 1e 80 88 ff ff 68 c9 db 1e 80 88 ff ff  h.......h.......
    00 c0 7b 2f 80 88 ff ff 00 c8 db 1e 80 88 ff ff  ..{/............
  backtrace:
    [<00000000e9d9fdb6>] __alloc_skb+0x223/0x250 net/core/skbuff.c:644
    [<000000002c3e4e0b>] alloc_skb include/linux/skbuff.h:1288 [inline]
    [<000000002c3e4e0b>] alloc_skb_with_frags+0x6f/0x350 net/core/skbuff.c:6378
    [<00000000825f98d7>] sock_alloc_send_pskb+0x3ac/0x3e0 net/core/sock.c:2729
    [<00000000e9eb3df3>] tun_alloc_skb drivers/net/tun.c:1529 [inline]
    [<00000000e9eb3df3>] tun_get_user+0x5e1/0x1f90 drivers/net/tun.c:1841
    [<0000000053096912>] tun_chr_write_iter+0xac/0x120 drivers/net/tun.c:2035
    [<00000000b9282ae0>] call_write_iter include/linux/fs.h:1868 [inline]
    [<00000000b9282ae0>] new_sync_write fs/read_write.c:491 [inline]
    [<00000000b9282ae0>] vfs_write+0x40f/0x530 fs/read_write.c:584
    [<00000000524566e4>] ksys_write+0xa1/0x170 fs/read_write.c:637
    [<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80
    [<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc

Fixes: cde8b15f1aab ("tuntap: add ioctl to attach or detach a file form tuntap device")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: tun: rebuild error handling in tun_get_user

[ Upstream commit ab00af85d2f886a8e4ace1342d9cc2b232eab6a8 ]

The error handling in tun_get_user is very scattered.
This patch unifies error handling, reduces duplication of code, and
makes the logic clearer.

Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 82b2bc279467 ("tun: Fix memory leak for detached NAPI queue.")
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: storvsc: Don't pass unused PFNs to Hyper-V host

[ Upstream commit 4e81a6cba517cb33584308a331f14f5e3fec369b ]

In a SCSI request, storvsc pre-allocates space for up to
MAX_PAGE_BUFFER_COUNT physical frame numbers to be passed to Hyper-V.  If
the size of the I/O request requires more PFNs, a separate memory area of
exactly the correct size is dynamically allocated.

But when the pre-allocated area is used, current code always passes
MAX_PAGE_BUFFER_COUNT PFNs to Hyper-V, even if fewer are needed.  While
this doesn't break anything because the additional PFNs are always zero,
more bytes than necessary are copied into the VMBus channel ring buffer.
This takes CPU cycles and wastes space in the ring buffer. For a typical 4
Kbyte I/O that requires only a single PFN, 248 unnecessary bytes are
copied.

Fix this by setting the payload_sz based on the actual number of PFNs
required, not the size of the pre-allocated space.

Reported-by: John Starks <jostarks@microsoft.com>
Fixes: 8f43710543ef ("scsi: storvsc: Support PAGE_SIZE larger than 4K")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1684171241-16209-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: don't trust firmware n_channels

[ Upstream commit 682b6dc29d98e857e6ca4bbc077c7dc2899b7473 ]

If the firmware sends us a corrupted MCC response with
n_channels much larger than the command response can be,
we might copy far too much (uninitialized) memory and
even crash if the n_channels is large enough to make it
run out of the one page allocated for the FW response.

Fix that by checking the lengths. Doing a < comparison
would be sufficient, but the firmware should be doing
it correctly, so check more strictly.

Fixes: dcaf9f5ecb6f ("iwlwifi: mvm: add MCC update FW API")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.d7b233139eb4.I51fd319df8e9d41881fc8450e83d78049518a79a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: fix OEM's name in the tas approved list

[ Upstream commit d0246a0e49efee0f8649d0e4f2350614cdfe6565 ]

Fix a spelling mistake.

Fixes: 2856f623ce48 ("iwlwifi: mvm: Add list of OEMs allowed to use TAS")
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.4090de6d1878.If9391ef6da78f1b2cc5eb6cb8f6965816bb7a7f5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: fix OEM's name in the ppag approved list

[ Upstream commit eca7296d9a671e9961834d2ace9cc0ce21fc15b3 ]

Fix a spelling mistake.

Fixes: e8e10a37c51c ("iwlwifi: acpi: move ppag code from mvm to fw/acpi")
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.fdd07f36a8bf.I223e5fb16ab5c95d504c3fdaffd0bd70affad1c2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: fw: fix DBGI dump

[ Upstream commit d3ae69180bbd74bcbc03a2b6d10ed7eccbe98c23 ]

The DBGI dump is (unsurprisingly) of type DBGI, not SRAM.
This leads to bad register accesses because the union is
built differently, there's no allocation ID, and thus the
allocation ID ends up being 0x8000.

Note that this was already wrong for DRAM vs. SMEM since
they use different parts of the union, but the allocation
ID is at the same place, so it worked.

Fix all of this but set the allocation ID in a way that
the offset calculation ends up without any offset.

Fixes: 34bc27783a31 ("iwlwifi: yoyo: fix DBGI_SRAM ini dump header.")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.19a302ae4c65.I12272599f7c1930666157b9d5e7f81fe9ec4c421@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: fix cancel_delayed_work_sync() deadlock

[ Upstream commit c2d8b7f257b2398f2d866205365895e038beca12 ]

Lockdep points out that we can deadlock here by calling
cancel_delayed_work_sync() because that might be already
running and gotten interrupted by the NAPI soft-IRQ.
Even just calling something that can sleep is wrong in
this context though.

Luckily, it doesn't even really matter since the things
we need to do are idempotent, so just drop the _sync().

Fixes: e5d153ec54f0 ("iwlwifi: mvm: fix CSA AP side")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.b1813c823b4d.I9d20cc06d24fa40b6774d3dd95ea5e2bf8dd015b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: Abort running color change when stopping the AP

[ Upstream commit a23d7f5b2fbda114de60c4b53311e052281d7533 ]

When stopping the AP, there might be a color change in progress. It
should be deactivated here, or the driver might later finalize a color
change on a stopped AP.

Fixes: 5f9404abdf2a (mac80211: add support for BSS color change)
Signed-off-by: Michael Lee <michael-cy.lee@mediatek.com>
Link: https://lore.kernel.org/r/20230504080441.22958-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: fix min center freq offset tracing

[ Upstream commit 248e4776514bf70236e6b1a54c65aa5324c8b1eb ]

We need to set the correct trace variable, otherwise we're
overwriting something else instead and the right one that
we print later is not initialized.

Fixes: b6011960f392 ("mac80211: handle channel frequency offset")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-2-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: fortify the spinlock against deadlock by interrupt

[ Upstream commit ef6e1997da63ad0ac3fe33153fec9524c9ae56c9 ]

In the function ieee80211_tx_dequeue() there is a particular locking
sequence:

begin:
spin_lock(&local->queue_stop_reason_lock);
q_stopped = local->queue_stop_reasons[q];
spin_unlock(&local->queue_stop_reason_lock);

However small the chance (increased by ftracetest), an asynchronous
interrupt can occur in between of spin_lock() and spin_unlock(),
and the interrupt routine will attempt to lock the same
&local->queue_stop_reason_lock again.

This will cause a costly reset of the CPU and the wifi device or an
altogether hang in the single CPU and single core scenario.

The only remaining spin_lock(&local->queue_stop_reason_lock) that
did not disable interrupts was patched, which should prevent any
deadlocks on the same CPU/core and the same wifi device.

This is the probable trace of the deadlock:

kernel: ================================
kernel: WARNING: inconsistent lock state
kernel: 6.3.0-rc6-mt-20230401-00001-gf86822a1170f #4 Tainted: G        W
kernel: --------------------------------
kernel: inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
kernel: kworker/5:0/25656 [HC0[0]:SC0[0]:HE1:SE1] takes:
kernel: ffff9d6190779478 (&local->queue_stop_reason_lock){+.?.}-{2:2}, at: return_to_handler+0x0/0x40
kernel: {IN-SOFTIRQ-W} state was registered at:
kernel:   lock_acquire+0xc7/0x2d0
kernel:   _raw_spin_lock+0x36/0x50
kernel:   ieee80211_tx_dequeue+0xb4/0x1330 [mac80211]
kernel:   iwl_mvm_mac_itxq_xmit+0xae/0x210 [iwlmvm]
kernel:   iwl_mvm_mac_wake_tx_queue+0x2d/0xd0 [iwlmvm]
kernel:   ieee80211_queue_skb+0x450/0x730 [mac80211]
kernel:   __ieee80211_xmit_fast.constprop.66+0x834/0xa50 [mac80211]
kernel:   __ieee80211_subif_start_xmit+0x217/0x530 [mac80211]
kernel:   ieee80211_subif_start_xmit+0x60/0x580 [mac80211]
kernel:   dev_hard_start_xmit+0xb5/0x260
kernel:   __dev_queue_xmit+0xdbe/0x1200
kernel:   neigh_resolve_output+0x166/0x260
kernel:   ip_finish_output2+0x216/0xb80
kernel:   __ip_finish_output+0x2a4/0x4d0
kernel:   ip_finish_output+0x2d/0xd0
kernel:   ip_output+0x82/0x2b0
kernel:   ip_local_out+0xec/0x110
kernel:   igmpv3_sendpack+0x5c/0x90
kernel:   igmp_ifc_timer_expire+0x26e/0x4e0
kernel:   call_timer_fn+0xa5/0x230
kernel:   run_timer_softirq+0x27f/0x550
kernel:   __do_softirq+0xb4/0x3a4
kernel:   irq_exit_rcu+0x9b/0xc0
kernel:   sysvec_apic_timer_interrupt+0x80/0xa0
kernel:   asm_sysvec_apic_timer_interrupt+0x1f/0x30
kernel:   _raw_spin_unlock_irqrestore+0x3f/0x70
kernel:   free_to_partial_list+0x3d6/0x590
kernel:   __slab_free+0x1b7/0x310
kernel:   kmem_cache_free+0x52d/0x550
kernel:   putname+0x5d/0x70
kernel:   do_sys_openat2+0x1d7/0x310
kernel:   do_sys_open+0x51/0x80
kernel:   __x64_sys_openat+0x24/0x30
kernel:   do_syscall_64+0x5c/0x90
kernel:   entry_SYSCALL_64_after_hwframe+0x72/0xdc
kernel: irq event stamp: 5120729
kernel: hardirqs last  enabled at (5120729): [<ffffffff9d149936>] trace_graph_return+0xd6/0x120
kernel: hardirqs last disabled at (5120728): [<ffffffff9d149950>] trace_graph_return+0xf0/0x120
kernel: softirqs last  enabled at (5069900): [<ffffffff9cf65b60>] return_to_handler+0x0/0x40
kernel: softirqs last disabled at (5067555): [<ffffffff9cf65b60>] return_to_handler+0x0/0x40
kernel:
        other info that might help us debug this:
kernel:  Possible unsafe locking scenario:
kernel:        CPU0
kernel:        ----
kernel:   lock(&local->queue_stop_reason_lock);
kernel:   <Interrupt>
kernel:     lock(&local->queue_stop_reason_lock);
kernel:
         *** DEADLOCK ***
kernel: 8 locks held by kworker/5:0/25656:
kernel:  #0: ffff9d618009d138 ((wq_completion)events_freezable){+.+.}-{0:0}, at: process_one_work+0x1ca/0x530
kernel:  #1: ffffb1ef4637fe68 ((work_completion)(&local->restart_work)){+.+.}-{0:0}, at: process_one_work+0x1ce/0x530
kernel:  #2: ffffffff9f166548 (rtnl_mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40
kernel:  #3: ffff9d6190778728 (&rdev->wiphy.mtx){+.+.}-{3:3}, at: return_to_handler+0x0/0x40
kernel:  #4: ffff9d619077b480 (&mvm->mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40
kernel:  #5: ffff9d61907bacd8 (&trans_pcie->mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40
kernel:  #6: ffffffff9ef9cda0 (rcu_read_lock){....}-{1:2}, at: iwl_mvm_queue_state_change+0x59/0x3a0 [iwlmvm]
kernel:  #7: ffffffff9ef9cda0 (rcu_read_lock){....}-{1:2}, at: iwl_mvm_mac_itxq_xmit+0x42/0x210 [iwlmvm]
kernel:
        stack backtrace:
kernel: CPU: 5 PID: 25656 Comm: kworker/5:0 Tainted: G        W          6.3.0-rc6-mt-20230401-00001-gf86822a1170f #4
kernel: Hardware name: LENOVO 82H8/LNVNB161216, BIOS GGCN51WW 11/16/2022
kernel: Workqueue: events_freezable ieee80211_restart_work [mac80211]
kernel: Call Trace:
kernel:  <TASK>
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  dump_stack_lvl+0x5f/0xa0
kernel:  dump_stack+0x14/0x20
kernel:  print_usage_bug.part.46+0x208/0x2a0
kernel:  mark_lock.part.47+0x605/0x630
kernel:  ? sched_clock+0xd/0x20
kernel:  ? trace_clock_local+0x14/0x30
kernel:  ? __rb_reserve_next+0x5f/0x490
kernel:  ? _raw_spin_lock+0x1b/0x50
kernel:  __lock_acquire+0x464/0x1990
kernel:  ? mark_held_locks+0x4e/0x80
kernel:  lock_acquire+0xc7/0x2d0
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  ? ftrace_return_to_handler+0x8b/0x100
kernel:  ? preempt_count_add+0x4/0x70
kernel:  _raw_spin_lock+0x36/0x50
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  ieee80211_tx_dequeue+0xb4/0x1330 [mac80211]
kernel:  ? prepare_ftrace_return+0xc5/0x190
kernel:  ? ftrace_graph_func+0x16/0x20
kernel:  ? 0xffffffffc02ab0b1
kernel:  ? lock_acquire+0xc7/0x2d0
kernel:  ? iwl_mvm_mac_itxq_xmit+0x42/0x210 [iwlmvm]
kernel:  ? ieee80211_tx_dequeue+0x9/0x1330 [mac80211]
kernel:  ? __rcu_read_lock+0x4/0x40
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  iwl_mvm_mac_itxq_xmit+0xae/0x210 [iwlmvm]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  iwl_mvm_queue_state_change+0x311/0x3a0 [iwlmvm]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  iwl_mvm_wake_sw_queue+0x17/0x20 [iwlmvm]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  iwl_txq_gen2_unmap+0x1c9/0x1f0 [iwlwifi]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  iwl_txq_gen2_free+0x55/0x130 [iwlwifi]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  iwl_txq_gen2_tx_free+0x63/0x80 [iwlwifi]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  _iwl_trans_pcie_gen2_stop_device+0x3f3/0x5b0 [iwlwifi]
kernel:  ? _iwl_trans_pcie_gen2_stop_device+0x9/0x5b0 [iwlwifi]
kernel:  ? mutex_lock_nested+0x4/0x30
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  iwl_trans_pcie_gen2_stop_device+0x5f/0x90 [iwlwifi]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  iwl_mvm_stop_device+0x78/0xd0 [iwlmvm]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  __iwl_mvm_mac_start+0x114/0x210 [iwlmvm]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  iwl_mvm_mac_start+0x76/0x150 [iwlmvm]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  drv_start+0x79/0x180 [mac80211]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  ieee80211_reconfig+0x1523/0x1ce0 [mac80211]
kernel:  ? synchronize_net+0x4/0x50
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  ieee80211_restart_work+0x108/0x170 [mac80211]
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  process_one_work+0x250/0x530
kernel:  ? ftrace_regs_caller_end+0x66/0x66
kernel:  worker_thread+0x48/0x3a0
kernel:  ? __pfx_worker_thread+0x10/0x10
kernel:  kthread+0x10f/0x140
kernel:  ? __pfx_kthread+0x10/0x10
kernel:  ret_from_fork+0x29/0x50
kernel:  </TASK>

Fixes: 4444bc2116ae ("wifi: mac80211: Proper mark iTXQs for resumption")
Link: https://lore.kernel.org/all/1f58a0d1-d2b9-d851-73c3-93fcc607501c@alu.unizg.hr/
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Cc: Gregory Greenman <gregory.greenman@intel.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/all/cdc80531-f25f-6f9d-b15f-25e16130b53a@alu.unizg.hr/
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: tag, or it goes automatically?
Link: https://lore.kernel.org/r/20230425164005.25272-1-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: Drop entries with invalid BSSIDs in RNR

[ Upstream commit 1b6b4ed01493b7ea2205ab83c49198f7d13ca9d2 ]

Ignore AP information for entries that include an invalid
BSSID in the TBTT information field, e.g., all zeros BSSIDs.

Fixes: c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230424103224.5e65d04d1448.Ic10c8577ae4a85272c407106c9d0a2ecb5372743@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Fix ice VF reset during iavf initialization

[ Upstream commit 7255355a0636b4eff08d5e8139c77d98f151c4fc ]

Fix the current implementation that causes ice_trigger_vf_reset()
to start resetting the VF even when the VF-NIC is still initializing.

When we reset NIC with ice driver it can interfere with
iavf-vf initialization e.g. during consecutive resets induced by ice

iavf                ice
  |                  |
  |<-----------------|
  |            ice resets vf
 iavf                |
 reset               |
 start               |
  |<-----------------|
  |             ice resets vf
  |             causing iavf
  |             initialization
  |             error
  |                  |
 iavf
 reset
 end

This leads to a series of -53 errors
(failed to init adminq) from the IAVF.

Change the state of the vf_state field to be not active when the IAVF
is still initializing. Make sure to wait until receiving the message on
the message box to ensure that the vf is ready and initializded.

In simple terms we use the ACTIVE flag to make sure that the ice
driver knows if the iavf is ready for another reset

  iavf                  ice
    |                    |
    |                    |
    |<------------- ice resets vf
  iavf           vf_state != ACTIVE
  reset                  |
  start                  |
    |                    |
    |                    |
  iavf                   |
  reset-------> vf_state == ACTIVE
  end              ice resets vf
    |                    |
    |                    |

Fixes: c54d209c78b8 ("ice: Wait for VF to be reset/ready before configuration")
Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Acked-by: Jacob Keller <Jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: introduce clear_reset_state operation

[ Upstream commit fa4a15c85c849e92257da6dbffeb1e3a6399fd7b ]

When hardware is reset, the VF relies on the VFGEN_RSTAT register to detect
when the VF is finished resetting. This is a tri-state register where 0
indicates a reset is in progress, 1 indicates the hardware is done
resetting, and 2 indicates that the software is done resetting.

Currently the PF driver relies on the device hardware resetting VFGEN_RSTAT
when a global reset occurs. This works ok, but it does mean that the VF
might not immediately notice a reset when the driver first detects that the
global reset is occurring.

This is also problematic for Scalable IOV, because there is no read/write
equivalent VFGEN_RSTAT register for the Scalable VSI type. Instead, the
Scalable IOV VFs will need to emulate this register.

To support this, introduce a new VF operation, clear_reset_state, which is
called when the PF driver first detects a global reset. The Single Root IOV
implementation can just write to VFGEN_RSTAT to ensure it's cleared
immediately, without waiting for the actual hardware reset to begin. The
Scalable IOV implementation will use this as part of its tracking of the
reset status to allow properly reporting the emulated VFGEN_RSTAT to the VF
driver.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 7255355a0636 ("ice: Fix ice VF reset during iavf initialization")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmgenet: Restore phy_stop() depending upon suspend/close

[ Upstream commit 225c657945c4a6307741cb3cc89467eadcc26e9b ]

Removing the phy_stop() from bcmgenet_netif_stop() ended up causing
warnings from the PHY library that phy_start() is called from the
RUNNING state since we are no longer stopping the PHY state machine
during bcmgenet_suspend().

Restore the call to phy_stop() but make it conditional on being called
from the close or suspend path.

Fixes: c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine")
Fixes: 93e0401e0fc0 ("net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230515025608.2587012-1-f.fainelli@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()

[ Upstream commit 93e0401e0fc0c54b0ac05b687cd135c2ac38187c ]

The call to phy_stop() races with the later call to phy_disconnect(),
resulting in concurrent phy_suspend() calls being run from different
CPUs. The final call to phy_disconnect() ensures that the PHY is
stopped and suspended, too.

Fixes: c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: dev: fix missing CAN XL support in can_put_echo_skb()

[ Upstream commit 6bffdc38f9935bae49f980448f3f6be2dada0564 ]

can_put_echo_skb() checks for the enabled IFF_ECHO flag and the
correct ETH_P type of the given skbuff. When implementing the CAN XL
support the new check for ETH_P_CANXL has been forgotten.

Fixes: fb08cba12b52 ("can: canxl: update CAN infrastructure for CAN XL frames")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230506184515.39241-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cio: include subchannels without devices also for evaluation

[ Upstream commit b1b0d5aec1cf9f9a900a14964f869c68688d923e ]

Currently when the new channel-path is enabled, we do evaluation only
on the subchannels with a device connected on it. This is because,
in the past, if the device in the subchannel is not working or not
available, we used to unregister the subchannels. But, from the 'commit
2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")'
we allow subchannels with or without an active device connected
on it. So, when we do the io_subchannel_verify, make sure that,
we are evaluating the subchannels without any device too.

Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: check the bearer min mtu properly when setting it by netlink

[ Upstream commit 35a089b5d793d2bfd2cc7cfa6104545184de2ce7 ]

Checking the bearer min mtu with tipc_udp_mtu_bad() only works for
IPv4 UDP bearer, and IPv6 UDP bearer has a different value for the
min mtu. This patch checks with encap_hlen + TIPC_MIN_BEARER_MTU
for min mtu, which works for both IPv4 and IPv6 UDP bearer.

Note that tipc_udp_mtu_bad() is still used to check media min mtu
in __tipc_nl_media_set(), as m->mtu currently is only used by the
IPv4 UDP bearer as its default mtu value.

Fixes: 682cd3cf946b ("tipc: confgiure and apply UDP bearer MTU on running links")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: do not update mtu if msg_max is too small in mtu negotiation

[ Upstream commit 56077b56cd3fb78e1c8619e29581ba25a5c55e86 ]

When doing link mtu negotiation, a malicious peer may send Activate msg
with a very small mtu, e.g. 4 in Shuang's testing, without checking for
the minimum mtu, l->mtu will be set to 4 in tipc_link_proto_rcv(), then
n->links[bearer_id].mtu is set to 4294967228, which is a overflow of
'4 - INT_H_SIZE - EMSG_OVERHEAD' in tipc_link_mss().

With tipc_link.mtu = 4, tipc_link_xmit() kept printing the warning:

 tipc: Too large msg, purging xmit list 1 5 0 40 4!
 tipc: Too large msg, purging xmit list 1 15 0 60 4!

And with tipc_link_entry.mtu 4294967228, a huge skb was allocated in
named_distribute(), and when purging it in tipc_link_xmit(), a crash
was even caused:

  general protection fault, probably for non-canonical address 0x2100001011000dd: 0000 [#1] PREEMPT SMP PTI
  CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 6.3.0.neta #19
  RIP: 0010:kfree_skb_list_reason+0x7e/0x1f0
  Call Trace:
   <IRQ>
   skb_release_data+0xf9/0x1d0
   kfree_skb_reason+0x40/0x100
   tipc_link_xmit+0x57a/0x740 [tipc]
   tipc_node_xmit+0x16c/0x5c0 [tipc]
   tipc_named_node_up+0x27f/0x2c0 [tipc]
   tipc_node_write_unlock+0x149/0x170 [tipc]
   tipc_rcv+0x608/0x740 [tipc]
   tipc_udp_recv+0xdc/0x1f0 [tipc]
   udp_queue_rcv_one_skb+0x33e/0x620
   udp_unicast_rcv_skb.isra.72+0x75/0x90
   __udp4_lib_rcv+0x56d/0xc20
   ip_protocol_deliver_rcu+0x100/0x2d0

This patch fixes it by checking the new mtu against tipc_bearer_min_mtu(),
and not updating mtu if it is too small.

Fixes: ed193ece2649 ("tipc: simplify link mtu negotiation")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: add tipc_bearer_min_mtu to calculate min mtu

[ Upstream commit 3ae6d66b605be604644d4bb5708a7ffd9cf1abe8 ]

As different media may requires different min mtu, and even the
same media with different net family requires different min mtu,
add tipc_bearer_min_mtu() to calculate min mtu accordingly.

This API will be used to check the new mtu when doing the link
mtu negotiation in the next patch.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 56077b56cd3f ("tipc: do not update mtu if msg_max is too small in mtu negotiation")
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_net: Fix error unwinding of XDP initialization

[ Upstream commit 5306623a9826aa7d63b32c6a3803c798a765474d ]

When initializing XDP in virtnet_open(), some rq xdp initialization
may hit an error causing net device open failed. However, previous
rqs have already initialized XDP and enabled NAPI, which is not the
expected behavior. Need to roll back the previous rq initialization
to avoid leaks in error unwinding of init code.

Also extract helper functions of disable and enable queue pairs.
Use newly introduced disable helper function in error unwinding and
virtnet_close. Use enable helper function in virtnet_open.

Fixes: 754b8a21a96d ("virtio_net: setup xdp_rxq_info")
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: William Tu <witu@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio-net: Maintain reverse cleanup order

[ Upstream commit 27369c9c2b722617063d6b80c758ab153f1d95d4 ]

To easily audit the code, better to keep the device stop()
sequence to be mirror of the device open() sequence.

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 5306623a9826 ("virtio_net: Fix error unwinding of XDP initialization")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: nsh: Use correct mac_offset to unwind gso skb in nsh_gso_segment()

[ Upstream commit c83b49383b595be50647f0c764a48c78b5f3c4f8 ]

As the call trace shows, skb_panic was caused by wrong skb->mac_header
in nsh_gso_segment():

invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 3 PID: 2737 Comm: syz Not tainted 6.3.0-next-20230505 #1
RIP: 0010:skb_panic+0xda/0xe0
call Trace:
 skb_push+0x91/0xa0
 nsh_gso_segment+0x4f3/0x570
 skb_mac_gso_segment+0x19e/0x270
 __skb_gso_segment+0x1e8/0x3c0
 validate_xmit_skb+0x452/0x890
 validate_xmit_skb_list+0x99/0xd0
 sch_direct_xmit+0x294/0x7c0
 __dev_queue_xmit+0x16f0/0x1d70
 packet_xmit+0x185/0x210
 packet_snd+0xc15/0x1170
 packet_sendmsg+0x7b/0xa0
 sock_sendmsg+0x14f/0x160

The root cause is:
nsh_gso_segment() use skb->network_header - nhoff to reset mac_header
in skb_gso_error_unwind() if inner-layer protocol gso fails.
However, skb->network_header may be reset by inner-layer protocol
gso function e.g. mpls_gso_segment. skb->mac_header reset by the
inaccurate network_header will be larger than skb headroom.

nsh_gso_segment
    nhoff = skb->network_header - skb->mac_header;
    __skb_pull(skb,nsh_len)
    skb_mac_gso_segment
        mpls_gso_segment
            skb_reset_network_header(skb);//skb->network_header+=nsh_len
            return -EINVAL;
    skb_gso_error_unwind
        skb_push(skb, nsh_len);
        skb->mac_header = skb->network_header - nhoff;
        // skb->mac_header > skb->headroom, cause skb_push panic

Use correct mac_offset to restore mac_header and get rid of nhoff.

Fixes: c411ed854584 ("nsh: add GSO support")
Reported-by: syzbot+632b5d9964208bfef8c0@syzkaller.appspotmail.com
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/exynos: fix g2d_open/close helper function definitions

[ Upstream commit 2ef0785b30bd6549ddbc124979f1b6596e065ae2 ]

The empty stub functions are defined as global functions, which
causes a warning because of missing prototypes:

drivers/gpu/drm/exynos/exynos_drm_g2d.h:37:5: error: no previous prototype for 'g2d_open'
drivers/gpu/drm/exynos/exynos_drm_g2d.h:42:5: error: no previous prototype for 'g2d_close'

Mark them as 'static inline' to avoid the warning and to make
them behave as intended.

Fixes: eb4d9796fa34 ("drm/exynos: g2d: Convert to driver component API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: topology: Fix logic for copying tuples

[ Upstream commit 41c5305cc3d827d2ea686533777a285176ae01a0 ]

Topology could have more instances of the tokens being searched for than
the number of sets that need to be copied. Stop copying token after the
limit of number of token instances has been reached. This worked before
only by chance as we had allocated more size for the tuples array than
the number of actual tokens being parsed.

Fixes: 7006d20e5e9d ("ASoC: SOF: Introduce IPC3 ops")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512114630.24439-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: mt8186: Fix use-after-free in driver remove path

[ Upstream commit a93d2afd3f77a7331271a0f25c6a11003db69b3c ]

When devm runs function in the "remove" path for a device it runs them
in the reverse order. That means that if you have parts of your driver
that aren't using devm or are using "roll your own" devm w/
devm_add_action_or_reset() you need to keep that in mind.

The mt8186 audio driver didn't quite get this right. Specifically, in
mt8186_init_clock() it called mt8186_audsys_clk_register() and then
went on to call a bunch of other devm function. The caller of
mt8186_init_clock() used devm_add_action_or_reset() to call
mt8186_deinit_clock() but, because of the intervening devm functions,
the order was wrong.

Specifically at probe time, the order was:
1. mt8186_audsys_clk_register()
2. afe_priv->clk = devm_kcalloc(...)
3. afe_priv->clk[i] = devm_clk_get(...)

At remove time, the order (which should have been 3, 2, 1) was:
1. mt8186_audsys_clk_unregister()
3. Free all of afe_priv->clk[i]
2. Free afe_priv->clk

The above seemed to be causing a use-after-free. Luckily, it's easy to
fix this by simply using devm more correctly. Let's move the
devm_add_action_or_reset() to the right place. In addition to fixing
the use-after-free, code inspection shows that this fixes a leak
(missing call to mt8186_audsys_clk_unregister()) that would have
happened if any of the syscon_regmap_lookup_by_phandle() calls in
mt8186_init_clock() had failed.

Fixes: 55b423d5623c ("ASoC: mediatek: mt8186: support audio clock control in platform driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org
Link: https://lore.kernel.org/r/20230511092437.1.I31cceffc8c45bb1af16eb613e197b3df92cdc19e@changeid
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix trace_svc_register() call site

[ Upstream commit 07a27305938559fb35f7a46fb90a5e37728bdee6 ]

The trace event recorded incorrect values for the registered family,
protocol, and port because the arguments are in the wrong order.

Fixes: b4af59328c25 ("SUNRPC: Trace server-side rpcbind registration events")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: always free ctxt when freeing deferred request

[ Upstream commit 948f072ada23e0a504c5e4d7d71d4c83bd0785ec ]

Since the ->xprt_ctxt pointer was added to svc_deferred_req, it has not
been sufficient to use kfree() to free a deferred request.  We may need
to free the ctxt as well.

As freeing the ctxt is all that ->xpo_release_rqst() does, we repurpose
it to explicit do that even when the ctxt is not stored in an rqst.
So we now have ->xpo_release_ctxt() which is given an xprt and a ctxt,
which may have been taken either from an rqst or from a dreq.  The
caller is now responsible for clearing that pointer after the call to
->xpo_release_ctxt.

We also clear dr->xprt_ctxt when the ctxt is moved into a new rqst when
revisiting a deferred request.  This ensures there is only one pointer
to the ctxt, so the risk of double freeing in future is reduced.  The
new code in svc_xprt_release which releases both the ctxt and any
rq_deferred depends on this.

Fixes: 773f91b2cf3f ("SUNRPC: Fix NFSD's request deferral on RDMA transports")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>