David Miller [Mon, 26 Nov 2018 21:03:46 +0000 (13:03 -0800)]
sparc: Fix JIT fused branch convergance.
On T4 and later sparc64 cpus we can use the fused compare and branch
instruction.
However, it can only be used if the branch destination is in the range
of a signed 10-bit immediate offset. This amounts to 1024
instructions forwards or backwards.
After the commit referenced in the Fixes: tag, the largest possible
size program seen by the JIT explodes by a significant factor.
As a result of this convergance takes many more passes since the
expanded "BPF_LDX | BPF_MSH | BPF_B" code sequence, for example,
contains several embedded branch on condition instructions.
On each pass, as suddenly new fused compare and branch instances
become valid, this makes thousands more in range for the next pass.
And so on and so forth.
This is most greatly exemplified by "BPF_MAXINSNS: exec all MSH" which
takes 35 passes to converge, and shrinks the image by about 64K.
To decrease the cost of this number of convergance passes, do the
convergance pass before we have the program image allocated, just like
other JITs (such as x86) do.
Fixes: e0cea7ce988c ("bpf: implement ld_abs/ld_ind in native bpf")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Tue, 27 Nov 2018 01:34:25 +0000 (17:34 -0800)]
Merge branch 'arm64-jit-fixes'
Daniel Borkmann says:
====================
This set contains a fix for arm64 BPF JIT. First patch generalizes
ppc64 way of retrieving subprog into bpf_jit_get_func_addr() as core
code and uses the same on arm64 in second patch. Tested on both arm64
and ppc64.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Mon, 26 Nov 2018 13:05:39 +0000 (14:05 +0100)]
bpf, arm64: fix getting subprog addr from aux for calls
The arm64 JIT has the same issue as ppc64 JIT in that the relative BPF
to BPF call offset can be too far away from core kernel in that relative
encoding into imm is not sufficient and could potentially be truncated,
see also
fd045f6cd98e ("arm64: add support for module PLTs") which adds
spill-over space for module_alloc() and therefore bpf_jit_binary_alloc().
Therefore, use the recently added bpf_jit_get_func_addr() helper for
properly fetching the address through prog->aux->func[off]->bpf_func
instead. This also has the benefit to optimize normal helper calls since
their address can use the optimized emission. Tested on Cavium ThunderX
CN8890.
Fixes: db496944fdaa ("bpf: arm64: add JIT support for multi-function programs")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Mon, 26 Nov 2018 13:05:38 +0000 (14:05 +0100)]
bpf, ppc64: generalize fetching subprog into bpf_jit_get_func_addr
Make fetching of the BPF call address from ppc64 JIT generic. ppc64
was using a slightly different variant rather than through the insns'
imm field encoding as the target address would not fit into that space.
Therefore, the target subprog number was encoded into the insns' offset
and fetched through fp->aux->func[off]->bpf_func instead. Given there
are other JITs with this issue and the mechanism of fetching the address
is JIT-generic, move it into the core as a helper instead. On the JIT
side, we get information on whether the retrieved address is a fixed
one, that is, not changing through JIT passes, or a dynamic one. For
the former, JITs can optimize their imm emission because this doesn't
change jump offsets throughout JIT process.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Tested-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David S. Miller [Mon, 26 Nov 2018 04:04:58 +0000 (20:04 -0800)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2018-11-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix an off-by-one bug when adjusting subprog start offsets after
patching, from Edward.
2) Fix several bugs such as overflow in size allocation in queue /
stack map creation, from Alexei.
3) Fix wrong IPv6 destination port byte order in bpf_sk_lookup_udp
helper, from Andrey.
4) Fix several bugs in bpftool such as preventing an infinite loop
in get_fdinfo, error handling and man page references, from Quentin.
5) Fix a warning in bpf_trace_printk() that wasn't catching an
invalid format string, from Martynas.
6) Fix a bug in BPF cgroup local storage where non-atomic allocation
was used in atomic context, from Roman.
7) Fix a NULL pointer dereference bug in bpftool from reallocarray()
error handling, from Jakub and Wen.
8) Add a copy of pkt_cls.h and tc_bpf.h uapi headers to the tools
include infrastructure so that bpftool compiles on older RHEL7-like
user space which does not ship these headers, from Yonghong.
9) Fix BPF kselftests for user space where to get ping test working
with ping6 and ping -6, from Li.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Sat, 24 Nov 2018 19:21:16 +0000 (14:21 -0500)]
net: always initialize pagedlen
In ip packet generation, pagedlen is initialized for each skb at the
start of the loop in __ip(6)_append_data, before label alloc_new_skb.
Depending on compiler options, code can be generated that jumps to
this label, triggering use of an an uninitialized variable.
In practice, at -O2, the generated code moves the initialization below
the label. But the code should not rely on that for correctness.
Fixes: 15e36f5b8e98 ("udp: paged allocation with gso")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 24 Nov 2018 17:12:24 +0000 (09:12 -0800)]
tcp: address problems caused by EDT misshaps
When a qdisc setup including pacing FQ is dismantled and recreated,
some TCP packets are sent earlier than instructed by TCP stack.
TCP can be fooled when ACK comes back, because the following
operation can return a negative value.
tcp_time_stamp(tp) - tp->rx_opt.rcv_tsecr;
Some paths in TCP stack were not dealing properly with this,
this patch addresses four of them.
Fixes: ab408b6dc744 ("tcp: switch tcp and sch_fq to new earliest departure time model")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 24 Nov 2018 17:42:32 +0000 (09:42 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas::
- Fix wrong conflict resolution around CONFIG_ARM64_SSBD
- Fix sparse warning on unsigned long constant
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: cpufeature: Fix mismerge of CONFIG_ARM64_SSBD block
arm64: sysreg: fix sparse warnings
Linus Torvalds [Sat, 24 Nov 2018 17:19:38 +0000 (09:19 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Need to take mutex in ath9k_add_interface(), from Dan Carpenter.
2) Fix mt76 build without CONFIG_LEDS_CLASS, from Arnd Bergmann.
3) Fix socket wmem accounting in SCTP, from Xin Long.
4) Fix failed resume crash in ena driver, from Arthur Kiyanovski.
5) qed driver passes bytes instead of bits into second arg of
bitmap_weight(). From Denis Bolotin.
6) Fix reset deadlock in ibmvnic, from Juliet Kim.
7) skb_scrube_packet() needs to scrub the fwd marks too, from Petr
Machata.
8) Make sure older TCP stacks see enough dup ACKs, and avoid doing SACK
compression during this period, from Eric Dumazet.
9) Add atomicity to SMC protocol cursor handling, from Ursula Braun.
10) Don't leave dangling error pointer if bpf_prog_add() fails in
thunderx driver, from Lorenzo Bianconi. Also, when we unmap TSO
headers, set sq->tso_hdrs to NULL.
11) Fix race condition over state variables in act_police, from Davide
Caratti.
12) Disable guest csum in the presence of XDP in virtio_net, from Jason
Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (64 commits)
net: gemini: Fix copy/paste error
net: phy: mscc: fix deadlock in vsc85xx_default_config
dt-bindings: dsa: Fix typo in "probed"
net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queue
net: amd: add missing of_node_put()
team: no need to do team_notify_peers or team_mcast_rejoin when disabling port
virtio-net: fail XDP set if guest csum is negotiated
virtio-net: disable guest csum during XDP set
net/sched: act_police: add missing spinlock initialization
net: don't keep lonely packets forever in the gro hash
net/ipv6: re-do dad when interface has IFF_NOARP flag change
packet: copy user buffers before orphan or clone
ibmvnic: Update driver queues after change in ring size support
ibmvnic: Fix RX queue buffer cleanup
net: thunderx: set xdp_prog to NULL if bpf_prog_add fails
net/dim: Update DIM start sample after each DIM iteration
net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts
net/smc: use after free fix in smc_wr_tx_put_slot()
net/smc: atomic SMCD cursor handling
net/smc: add SMC-D shutdown signal
...
Linus Torvalds [Sat, 24 Nov 2018 17:11:52 +0000 (09:11 -0800)]
Merge tag 'xfs-4.20-fixes-2' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Dave and I have continued our work fixing corruption problems that can
be found when running long-term burn-in exercisers on xfs. Here are
some patches fixing most of the problems, but there will likely be
more. :/
- Numerous corruption fixes for copy on write
- Numerous corruption fixes for blocksize < pagesize writes
- Don't miscalculate AG reservations for small final AGs
- Fix page cache truncation to work properly for reflink and extent
shifting
- Fix use-after-free when retrying failed inode/dquot buffer logging
- Fix corruptions seen when using copy_file_range in directio mode"
* tag 'xfs-4.20-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: readpages doesn't zero page tail beyond EOF
vfs: vfs_dedupe_file_range() doesn't return EOPNOTSUPP
iomap: dio data corruption and spurious errors when pipes fill
iomap: sub-block dio needs to zeroout beyond EOF
iomap: FUA is wrong for DIO O_DSYNC writes into unwritten extents
xfs: delalloc -> unwritten COW fork allocation can go wrong
xfs: flush removing page cache in xfs_reflink_remap_prep
xfs: extent shifting doesn't fully invalidate page cache
xfs: finobt AG reserves don't consider last AG can be a runt
xfs: fix transient reference count error in xfs_buf_resubmit_failed_buffers
xfs: uncached buffer tracing needs to print bno
xfs: make xfs_file_remap_range() static
xfs: fix shared extent data corruption due to missing cow reservation
Andreas Fiedler [Fri, 23 Nov 2018 23:16:34 +0000 (00:16 +0100)]
net: gemini: Fix copy/paste error
The TX stats should be started with the tx_stats_syncp,
there seems to be a copy/paste error in the driver.
Signed-off-by: Andreas Fiedler <andreas.fiedler@gmx.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Quentin Schulz [Fri, 23 Nov 2018 18:01:51 +0000 (19:01 +0100)]
net: phy: mscc: fix deadlock in vsc85xx_default_config
The vsc85xx_default_config function called in the vsc85xx_config_init
function which is used by VSC8530, VSC8531, VSC8540 and VSC8541 PHYs
mistakenly calls phy_read and phy_write in-between phy_select_page and
phy_restore_page.
phy_select_page and phy_restore_page actually take and release the MDIO
bus lock and phy_write and phy_read take and release the lock to write
or read to a PHY register.
Let's fix this deadlock by using phy_modify_paged which handles
correctly a read followed by a write in a non-standard page.
Fixes: 6a0bfbbe20b0 ("net: phy: mscc: migrate to phy_select/restore_page functions")
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fabio Estevam [Fri, 23 Nov 2018 17:46:50 +0000 (15:46 -0200)]
dt-bindings: dsa: Fix typo in "probed"
The correct form is "can be probed", so fix the typo.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Fri, 23 Nov 2018 17:28:01 +0000 (18:28 +0100)]
net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queue
Reset snd_queue tso_hdrs pointer to NULL in nicvf_free_snd_queue routine
since it is used to check if tso dma descriptor queue has been previously
allocated. The issue can be triggered with the following reproducer:
$ip link set dev enP2p1s0v0 xdpdrv obj xdp_dummy.o
$ip link set dev enP2p1s0v0 xdpdrv off
[ 341.467649] WARNING: CPU: 74 PID: 2158 at mm/vmalloc.c:1511 __vunmap+0x98/0xe0
[ 341.515010] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018
[ 341.521874] pstate:
60400005 (nZCv daif +PAN -UAO)
[ 341.526654] pc : __vunmap+0x98/0xe0
[ 341.530132] lr : __vunmap+0x98/0xe0
[ 341.533609] sp :
ffff00001c5db860
[ 341.536913] x29:
ffff00001c5db860 x28:
0000000000020000
[ 341.542214] x27:
ffff810feb5090b0 x26:
ffff000017e57000
[ 341.547515] x25:
0000000000000000 x24:
00000000fbd00000
[ 341.552816] x23:
0000000000000000 x22:
ffff810feb5090b0
[ 341.558117] x21:
0000000000000000 x20:
0000000000000000
[ 341.563418] x19:
ffff000017e57000 x18:
0000000000000000
[ 341.568719] x17:
0000000000000000 x16:
0000000000000000
[ 341.574020] x15:
0000000000000010 x14:
ffffffffffffffff
[ 341.579321] x13:
ffff00008985eb27 x12:
ffff00000985eb2f
[ 341.584622] x11:
ffff0000096b3000 x10:
ffff00001c5db510
[ 341.589923] x9 :
00000000ffffffd0 x8 :
ffff0000086868e8
[ 341.595224] x7 :
3430303030303030 x6 :
00000000000006ef
[ 341.600525] x5 :
00000000003fffff x4 :
0000000000000000
[ 341.605825] x3 :
0000000000000000 x2 :
ffffffffffffffff
[ 341.611126] x1 :
ffff0000096b3728 x0 :
0000000000000038
[ 341.616428] Call trace:
[ 341.618866] __vunmap+0x98/0xe0
[ 341.621997] vunmap+0x3c/0x50
[ 341.624961] arch_dma_free+0x68/0xa0
[ 341.628534] dma_direct_free+0x50/0x80
[ 341.632285] nicvf_free_resources+0x160/0x2d8 [nicvf]
[ 341.637327] nicvf_config_data_transfer+0x174/0x5e8 [nicvf]
[ 341.642890] nicvf_stop+0x298/0x340 [nicvf]
[ 341.647066] __dev_close_many+0x9c/0x108
[ 341.650977] dev_close_many+0xa4/0x158
[ 341.654720] rollback_registered_many+0x140/0x530
[ 341.659414] rollback_registered+0x54/0x80
[ 341.663499] unregister_netdevice_queue+0x9c/0xe8
[ 341.668192] unregister_netdev+0x28/0x38
[ 341.672106] nicvf_remove+0xa4/0xa8 [nicvf]
[ 341.676280] nicvf_shutdown+0x20/0x30 [nicvf]
[ 341.680630] pci_device_shutdown+0x44/0x88
[ 341.684720] device_shutdown+0x144/0x250
[ 341.688640] kernel_restart_prepare+0x44/0x50
[ 341.692986] kernel_restart+0x20/0x68
[ 341.696638] __se_sys_reboot+0x210/0x238
[ 341.700550] __arm64_sys_reboot+0x24/0x30
[ 341.704555] el0_svc_handler+0x94/0x110
[ 341.708382] el0_svc+0x8/0xc
[ 341.711252] ---[ end trace
3f4019c8439959c9 ]---
[ 341.715874] page:
ffff7e0003ef4000 count:0 mapcount:0 mapping:
0000000000000000 index:0x4
[ 341.723872] flags: 0x1fffe000000000()
[ 341.727527] raw:
001fffe000000000 ffff7e0003f1a008 ffff7e0003ef4048 0000000000000000
[ 341.735263] raw:
0000000000000004 0000000000000000 00000000ffffffff 0000000000000000
[ 341.742994] page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0)
where xdp_dummy.c is a simple bpf program that forwards the incoming
frames to the network stack (available here:
https://github.com/altoor/xdp_walkthrough_examples/blob/master/sample_1/xdp_dummy.c)
Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support")
Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yangtao Li [Thu, 22 Nov 2018 12:34:41 +0000 (07:34 -0500)]
net: amd: add missing of_node_put()
of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
This place doesn't do that, so fix it.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Thu, 22 Nov 2018 08:15:28 +0000 (16:15 +0800)]
team: no need to do team_notify_peers or team_mcast_rejoin when disabling port
team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin()
will send multicast join group message to notify peers. We should do this when
enabling/changed to a new port. But it doesn't make sense to do it when a port
is disabled.
On the other hand, when we set mcast_rejoin_count to 2, and do a failover,
team_port_disable() will increase mcast_rejoin.count_pending to 2 and then
team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send
4 mcast rejoin messages at latest, which will make user confused. The same
with notify_peers.count.
Fix it by deleting team_notify_peers() and team_mcast_rejoin() in
team_port_disable().
Reported-by: Liang Li <liali@redhat.com>
Fixes: fc423ff00df3a ("team: add peer notification")
Fixes: 492b200efdd20 ("team: add support for sending multicast rejoins")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martynas Pumputis [Fri, 23 Nov 2018 16:43:26 +0000 (17:43 +0100)]
bpf: fix check of allowed specifiers in bpf_trace_printk
A format string consisting of "%p" or "%s" followed by an invalid
specifier (e.g. "%p%\n" or "%s%") could pass the check which
would make format_decode (lib/vsprintf.c) to warn.
Fixes: 9c959c863f82 ("tracing: Allow BPF programs to call bpf_trace_printk()")
Reported-by: syzbot+1ec5c5ec949c4adaa0c4@syzkaller.appspotmail.com
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jason Wang [Thu, 22 Nov 2018 06:36:31 +0000 (14:36 +0800)]
virtio-net: fail XDP set if guest csum is negotiated
We don't support partial csumed packet since its metadata will be lost
or incorrect during XDP processing. So fail the XDP set if guest_csum
feature is negotiated.
Fixes: f600b6905015 ("virtio_net: Add XDP support")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Pavel Popa <pashinho1990@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Thu, 22 Nov 2018 06:36:30 +0000 (14:36 +0800)]
virtio-net: disable guest csum during XDP set
We don't disable VIRTIO_NET_F_GUEST_CSUM if XDP was set. This means we
can receive partial csumed packets with metadata kept in the
vnet_hdr. This may have several side effects:
- It could be overridden by header adjustment, thus is might be not
correct after XDP processing.
- There's no way to pass such metadata information through
XDP_REDIRECT to another driver.
- XDP does not support checksum offload right now.
So simply disable guest csum if possible in this the case of XDP.
Fixes: 3f93522ffab2d ("virtio-net: switch off offloads on demand if possible on XDP set")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Pavel Popa <pashinho1990@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 23 Nov 2018 19:24:55 +0000 (11:24 -0800)]
Merge tag 'ceph-for-4.20-rc4' of https://github.com/ceph/ceph-client
Pullk ceph fix from Ilya Dryomov:
"A messenger fix, marked for stable"
* tag 'ceph-for-4.20-rc4' of https://github.com/ceph/ceph-client:
libceph: fall back to sendmsg for slab pages
Linus Torvalds [Fri, 23 Nov 2018 19:20:14 +0000 (11:20 -0800)]
Merge tag 'for-linus-
20181123' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Just a single fix for this week, fixing an issue with nvme-fc"
* tag 'for-linus-
20181123' of git://git.kernel.dk/linux-block:
nvme-fc: resolve io failures during connect
Davide Caratti [Wed, 21 Nov 2018 17:23:53 +0000 (18:23 +0100)]
net/sched: act_police: add missing spinlock initialization
commit
f2cbd4852820 ("net/sched: act_police: fix race condition on state
variables") introduces a new spinlock, but forgets its initialization.
Ensure that tcf_police_init() initializes 'tcfp_lock' every time a 'police'
action is newly created, to avoid the following lockdep splat:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
<...>
Call Trace:
dump_stack+0x85/0xcb
register_lock_class+0x581/0x590
__lock_acquire+0xd4/0x1330
? tcf_police_init+0x2fa/0x650 [act_police]
? lock_acquire+0x9e/0x1a0
lock_acquire+0x9e/0x1a0
? tcf_police_init+0x2fa/0x650 [act_police]
? tcf_police_init+0x55a/0x650 [act_police]
_raw_spin_lock_bh+0x34/0x40
? tcf_police_init+0x2fa/0x650 [act_police]
tcf_police_init+0x2fa/0x650 [act_police]
tcf_action_init_1+0x384/0x4c0
tcf_action_init+0xf6/0x160
tcf_action_add+0x73/0x170
tc_ctl_action+0x122/0x160
rtnetlink_rcv_msg+0x2a4/0x490
? netlink_deliver_tap+0x99/0x400
? validate_linkmsg+0x370/0x370
netlink_rcv_skb+0x4d/0x130
netlink_unicast+0x196/0x230
netlink_sendmsg+0x2e5/0x3e0
sock_sendmsg+0x36/0x40
___sys_sendmsg+0x280/0x2f0
? _raw_spin_unlock+0x24/0x30
? handle_pte_fault+0xafe/0xf30
? find_held_lock+0x2d/0x90
? syscall_trace_enter+0x1df/0x360
? __sys_sendmsg+0x5e/0xa0
__sys_sendmsg+0x5e/0xa0
do_syscall_64+0x60/0x210
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f1841c7cf10
Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ae cc 00 00 48 89 04 24
RSP: 002b:
00007ffcf9df4d68 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
0000000000000001 RCX:
00007f1841c7cf10
RDX:
0000000000000000 RSI:
00007ffcf9df4dc0 RDI:
0000000000000003
RBP:
000000005bf56105 R08:
0000000000000002 R09:
00007ffcf9df8edc
R10:
00007ffcf9df47e0 R11:
0000000000000246 R12:
0000000000671be0
R13:
00007ffcf9df4e84 R14:
0000000000000008 R15:
0000000000000000
Fixes: f2cbd4852820 ("net/sched: act_police: fix race condition on state variables")
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 21 Nov 2018 17:21:35 +0000 (18:21 +0100)]
net: don't keep lonely packets forever in the gro hash
Eric noted that with UDP GRO and NAPI timeout, we could keep a single
UDP packet inside the GRO hash forever, if the related NAPI instance
calls napi_gro_complete() at an higher frequency than the NAPI timeout.
Willem noted that even TCP packets could be trapped there, till the
next retransmission.
This patch tries to address the issue, flushing the old packets -
those with a NAPI_GRO_CB age before the current jiffy - before scheduling
the NAPI timeout. The rationale is that such a timeout should be
well below a jiffy and we are not flushing packets eligible for sane GRO.
v1 -> v2:
- clarified the commit message and comment
RFC -> v1:
- added 'Fixes tags', cleaned-up the wording.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: 3b47d30396ba ("net: gro: add a per device gro flush timer")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Wed, 21 Nov 2018 13:52:33 +0000 (21:52 +0800)]
net/ipv6: re-do dad when interface has IFF_NOARP flag change
When we add a new IPv6 address, we should also join corresponding solicited-node
multicast address, unless the interface has IFF_NOARP flag, as function
addrconf_join_solict() did. But if we remove IFF_NOARP flag later, we do
not do dad and add the mcast address. So we will drop corresponding neighbour
discovery message that came from other nodes.
A typical example is after creating a ipvlan with mode l3, setting up an ipv6
address and changing the mode to l2. Then we will not be able to ping this
address as the interface doesn't join related solicited-node mcast address.
Fix it by re-doing dad when interface changed IFF_NOARP flag. Then we will add
corresponding mcast group and check if there is a duplicate address on the
network.
Reported-by: Jianlin Shi <jishi@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 23 Nov 2018 19:15:27 +0000 (11:15 -0800)]
Merge tag 'iommu-fixes-v4.20-rc3' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- Two fixes for the Intel VT-d driver to fix a NULL-ptr dereference and
an unbalance in an allocate/free path (allocated with memremap, freed
with iounmap)
- Fix for a crash in the Renesas IOMMU driver
- Fix for the Advanced Virtual Interrupt Controler (AVIC) code in the
AMD IOMMU driver
* tag 'iommu-fixes-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Use memunmap to free memremap
amd/iommu: Fix Guest Virtual APIC Log Tail Address Register
iommu/ipmmu-vmsa: Fix crash on early domain free
iommu/vt-d: Fix NULL pointer dereference in prq_event_thread()
Willem de Bruijn [Tue, 20 Nov 2018 18:00:18 +0000 (13:00 -0500)]
packet: copy user buffers before orphan or clone
tpacket_snd sends packets with user pages linked into skb frags. It
notifies that pages can be reused when the skb is released by setting
skb->destructor to tpacket_destruct_skb.
This can cause data corruption if the skb is orphaned (e.g., on
transmit through veth) or cloned (e.g., on mirror to another psock).
Create a kernel-private copy of data in these cases, same as tun/tap
zerocopy transmission. Reuse that infrastructure: mark the skb as
SKBTX_ZEROCOPY_FRAG, which will trigger copy in skb_orphan_frags(_rx).
Unlike other zerocopy packets, do not set shinfo destructor_arg to
struct ubuf_info. tpacket_destruct_skb already uses that ptr to notify
when the original skb is released and a timestamp is recorded. Do not
change this timestamp behavior. The ubuf_info->callback is not needed
anyway, as no zerocopy notification is expected.
Mark destructor_arg as not-a-uarg by setting the lower bit to 1. The
resulting value is not a valid ubuf_info pointer, nor a valid
tpacket_snd frame address. Add skb_zcopy_.._nouarg helpers for this.
The fix relies on features introduced in commit
52267790ef52 ("sock:
add MSG_ZEROCOPY"), so can be backported as is only to 4.14.
Tested with from `./in_netns.sh ./txring_overwrite` from
http://github.com/wdebruij/kerneltools/tests
Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap")
Reported-by: Anand H. Krishnan <anandhkrishnan@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 23 Nov 2018 18:56:16 +0000 (10:56 -0800)]
Merge tag 'acpi-4.20-rc4' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Prevent the ACPI core from registering a platform device for the
SMB0001 HID to avoid IRQ allocation issues (Hans de Goede)"
* tag 'acpi-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / platform: Add SMB0001 HID to forbidden_id_list
Linus Torvalds [Fri, 23 Nov 2018 18:52:57 +0000 (10:52 -0800)]
Merge tag 'pm-4.20-rc4' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two issues in the Operating Performance Points (OPP)
framework, one cpufreq driver issue, one problem related to the tasks
freezer and a few build-related issues in the cpupower utility.
Specifics:
- Fix tasks freezer deadlock in de_thread() that occurs if one of its
sub-threads has been frozen already (Chanho Min).
- Avoid registering a platform device by the ti-cpufreq driver on
platforms that cannot use it (Dave Gerlach).
- Fix a mistake in the ti-opp-supply operating performance points
(OPP) driver that caused an incorrect reference voltage to be used
and make it adjust the minimum voltage dynamically to avoid hangs
or crashes in some cases (Keerthy).
- Fix issues related to compiler flags in the cpupower utility and
correct a linking problem in it by renaming a file with a duplicate
name (Jiri Olsa, Konstantin Khlebnikov)"
* tag 'pm-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
exec: make de_thread() freezable
cpufreq: ti-cpufreq: Only register platform_device when supported
opp: ti-opp-supply: Correct the supply in _get_optimal_vdd_voltage call
opp: ti-opp-supply: Dynamically update u_volt_min
tools cpupower: Override CFLAGS assignments
tools cpupower debug: Allow to use outside build flags
tools/power/cpupower: fix compilation with STATIC=true
Will Deacon [Wed, 21 Nov 2018 15:07:00 +0000 (15:07 +0000)]
arm64: cpufeature: Fix mismerge of CONFIG_ARM64_SSBD block
When merging support for SSBD and the CRC32 instructions, the conflict
resolution for the new capability entries in arm64_features[]
inadvertedly predicated the availability of the CRC32 instructions on
CONFIG_ARM64_SSBD, despite the functionality being entirely unrelated.
Move the #ifdef CONFIG_ARM64_SSBD down so that it only covers the SSBD
capability.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Fri, 23 Nov 2018 18:40:19 +0000 (10:40 -0800)]
Merge tag 'gpio-v4.20-2' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Minor stuff except the IDA leak which was kind of important to fix.
Also new maintainers, yay.
- Do not lose an IDA on the gpiochip register errorpath.
- Fix the PXA non-pincontrol GPIO-using platforms.
- Fix the direction on the mockup GPIO driver.
- Add some MAINTAINERS stuff: Bartosz stepped up as GPIO
co-maintainer, and Andy established an Intel git tree"
* tag 'gpio-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
MAINTAINERS: Do maintain Intel GPIO drivers via separate tree
gpio: mockup: fix indicated direction
gpio: pxa: fix legacy non pinctrl aware builds again
gpio: don't free unallocated ida on gpiochip_add_data_with_key() error path
MAINTAINERS: add myself as co-maintainer of gpiolib
Linus Torvalds [Fri, 23 Nov 2018 18:36:02 +0000 (10:36 -0800)]
Merge tag 'mmc-v4.20-rc2' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC host:
- sdhci-pci: Fixup card detect lookup
- sdhci-pci: Workaround GLK firmware bug for tuning"
* tag 'mmc-v4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci: Workaround GLK firmware failing to restore the tuning value
mmc: sdhci-pci: Try "cd" for card-detect lookup before using NULL
Linus Torvalds [Fri, 23 Nov 2018 18:03:08 +0000 (10:03 -0800)]
Merge tag 'drm-fixes-2018-11-23' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular drm fixes:
amdgpu:
- Vega20 fixes
- firmware loading fix
- panel display fix
- override fix
i915:
- Sandybridge lockup fix
- fastboot DSI panel fix
- GPU hang on Broxton
- GPU reloc fixes on pineview/bearlake
ast:
- screen blurring fix
- cursor appearance fix
udmabuf:
- mmap fix
vc4:
- NULL deref fix
- async cursor update fix
All seems pretty normal at this stage"
* tag 'drm-fixes-2018-11-23' of git://anongit.freedesktop.org/drm/drm:
drm/ast: fixed cursor may disappear sometimes
drm/ast: change resolution may cause screen blurred
drm/i915: Add rotation readout for plane initial config
drm/i915: Force a LUT update in intel_initial_commit()
drm/fb-helper: Blacklist writeback when adding connectors to fbdev
drm/i915: Write GPU relocs harder with gen3
drm/amdgpu: Enable HDP memory light sleep
drm/i915: Prevent machine hang from Broxton's vtd w/a and error capture
drm/amd/pp: handle negative values when reading OD
drm/amdgpu: Add missing firmware entry for HAINAN
drm/amd/powerplay: disable Vega20 DS related features
drm/amdgpu: Fix oops when pp_funcs->switch_power_profile is unset
drm/i915: Disable LP3 watermarks on all SNB machines
drm/ast: Remove existing framebuffers before loading driver
udmabuf: set read/write flag when exporting
drm/amd/display: Support amdgpu "max bpc" connector property (v2)
drm/amdgpu: Add amdgpu "max bpc" connector property (v2)
drm/vc4: Set ->legacy_cursor_update to false when doing non-async updates
drm/vc4: Fix NULL pointer dereference in the async update path
Sergey Matyukevich [Fri, 16 Nov 2018 18:21:30 +0000 (21:21 +0300)]
arm64: sysreg: fix sparse warnings
Specify correct type for the constants to avoid
the following sparse complaints:
./arch/arm64/include/asm/sysreg.h:471:42: warning: constant 0xffffffffffffffff is so big it is unsigned long
./arch/arm64/include/asm/sysreg.h:512:42: warning: constant 0xffffffffffffffff is so big it is unsigned long
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Rafael J. Wysocki [Fri, 23 Nov 2018 09:32:49 +0000 (10:32 +0100)]
Merge branches 'pm-cpufreq' and 'pm-sleep'
* pm-cpufreq:
cpufreq: ti-cpufreq: Only register platform_device when supported
* pm-sleep:
exec: make de_thread() freezable
Rafael J. Wysocki [Fri, 23 Nov 2018 09:32:22 +0000 (10:32 +0100)]
Merge branches 'pm-opp' and 'pm-tools'
* pm-opp:
opp: ti-opp-supply: Correct the supply in _get_optimal_vdd_voltage call
opp: ti-opp-supply: Dynamically update u_volt_min
* pm-tools:
tools cpupower: Override CFLAGS assignments
tools cpupower debug: Allow to use outside build flags
tools/power/cpupower: fix compilation with STATIC=true
Dave Airlie [Fri, 23 Nov 2018 01:03:20 +0000 (11:03 +1000)]
Merge tag 'drm-intel-fixes-2018-11-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix for fastboot DSI panel boot time flicker regression, also fixes Bugzilla #108225
- Fix Bugzilla #101269 to avoid GPU hangs on Sandybridge machines
- Avoid GPU hang on error capture on Broxton with Vt-d enabled
- Avoid missing GPU relocations on Pineview and Bearlake (Gen3)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181122120555.GA18282@jlahtine-desk.ger.corp.intel.com
Alexei Starovoitov [Thu, 22 Nov 2018 18:49:56 +0000 (10:49 -0800)]
bpf: fix integer overflow in queue_stack_map
Fix the following issues:
- allow queue_stack_map for root only
- fix u32 max_entries overflow
- disallow value_size == 0
Fixes: f1a2e44a3aec ("bpf: add queue and stack maps")
Reported-by: Wei Wu <ww9210@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
David S. Miller [Thu, 22 Nov 2018 19:53:26 +0000 (11:53 -0800)]
Merge branch 'ibmvnic-Fix-queue-and-buffer-accounting-errors'
Thomas Falcon says:
====================
ibmvnic: Fix queue and buffer accounting errors
This series includes two small fixes. The first resolves a typo bug
in the code to clean up unused RX buffers during device queue removal.
The second ensures that device queue memory is updated to reflect new
supported queue ring sizes after migration to other backing hardware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Wed, 21 Nov 2018 17:17:59 +0000 (11:17 -0600)]
ibmvnic: Update driver queues after change in ring size support
During device reset, queue memory is not being updated to accommodate
changes in ring buffer sizes supported by backing hardware. Track
any differences in ring buffer sizes following the reset and update
queue memory when possible.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Wed, 21 Nov 2018 17:17:58 +0000 (11:17 -0600)]
ibmvnic: Fix RX queue buffer cleanup
The wrong index is used when cleaning up RX buffer objects during release
of RX queues. Update to use the correct index counter.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Wed, 21 Nov 2018 15:32:10 +0000 (16:32 +0100)]
net: thunderx: set xdp_prog to NULL if bpf_prog_add fails
Set xdp_prog pointer to NULL if bpf_prog_add fails since that routine
reports the error code instead of NULL in case of failure and xdp_prog
pointer value is used in the driver to verify if XDP is currently
enabled.
Moreover report the error code to userspace if nicvf_xdp_setup fails
Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tal Gilboa [Wed, 21 Nov 2018 14:28:23 +0000 (16:28 +0200)]
net/dim: Update DIM start sample after each DIM iteration
On every iteration of net_dim, the algorithm may choose to
check for the system state by comparing current data sample
with previous data sample. After each of these comparison,
regardless of the action taken, the sample used as baseline
is needed to be updated.
This patch fixes a bug that causes DIM to take wrong decisions,
due to never updating the baseline sample for comparison between
iterations. This way, DIM always compares current sample with
zeros.
Although this is a functional fix, it also improves and stabilizes
performance as the algorithm works properly now.
Performance:
Tested single UDP TX stream with pktgen:
samples/pktgen/pktgen_sample03_burst_single_flow.sh -i p4p2 -d 1.1.1.1
-m 24:8a:07:88:26:8b -f 3 -b 128
ConnectX-5 100GbE packet rate improved from 15-19Mpps to 19-20Mpps.
Also, toggling between profiles is less frequent with the fix.
Fixes: 8115b750dbcb ("net/dim: use struct net_dim_sample as arg to net_dim")
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 22 Nov 2018 16:45:44 +0000 (08:45 -0800)]
Merge tag 'sound-4.20-rc4' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only significant change is for OSS PCM emulation to convert with
kvcalloc() to address both performance and security issues. It's a
pretty straightforward change, which should be safe.
The rest are, as usual, device-specific small fixes for HD-audio"
* tag 'sound-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/ca0132 - fix AE-5 pincfg
ALSA: hda/ca0132 - Add new ZxR quirk
ALSA: hda/ca0132 - Call pci_iounmap() instead of iounmap()
ALSA: hda/realtek - Add quirk entry for HP Pavilion 15
ALSA: oss: Use kvzalloc() for local buffer allocations
Linus Torvalds [Thu, 22 Nov 2018 16:43:06 +0000 (08:43 -0800)]
Merge tag 'char-misc-4.20-rc4' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for issues that have been
reported.
Nothing major, highlights include:
- gnss sync write fixes
- uio oops fix
- nvmem fixes
- other minor fixes and some documentation/maintainers updates
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Documentation/security-bugs: Postpone fix publication in exceptional cases
MAINTAINERS: Add Sasha as a stable branch maintainer
gnss: sirf: fix synchronous write timeout
gnss: serial: fix synchronous write timeout
uio: Fix an Oops on load
test_firmware: fix error return getting clobbered
nvmem: core: fix regression in of_nvmem_cell_get()
misc: atmel-ssc: Fix section annotation on atmel_ssc_get_driver_data
drivers/misc/sgi-gru: fix Spectre v1 vulnerability
Drivers: hv: kvp: Fix the recent regression caused by incorrect clean-up
slimbus: ngd: remove unnecessary check
Linus Torvalds [Thu, 22 Nov 2018 16:39:29 +0000 (08:39 -0800)]
Merge tag 'usb-4.20-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB fixes for 4.20-rc4.
There's the usual xhci and dwc2/3 fixes as well as a few minor other
issues resolved for problems that have been reported. Full details are
in the shortlog.
All have been in linux-next for a while with no reported issues"
* tag 'usb-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdc-acm: add entry for Hiro (Conexant) modem
usb: xhci: Prevent bus suspend if a port connect change or polling state is detected
usb: core: Fix hub port connection events lost
usb: dwc3: gadget: fix ISOC TRB type on unaligned transfers
Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers"
usb: dwc2: pci: Fix an error code in probe
usb: dwc3: Fix NULL pointer exception in dwc3_pci_remove()
xhci: Add quirk to workaround the errata seen on Cavium Thunder-X2 Soc
usb: xhci: fix timeout for transition from RExit to U0
usb: xhci: fix uninitialized completion when USB3 port got wrong status
xhci: Add check for invalid byte size error when UAS devices are connected.
xhci: handle port status events for removed USB3 hcd
xhci: Fix leaking USB3 shared_hcd at xhci removal
USB: misc: appledisplay: add 20" Apple Cinema Display
USB: quirks: Add no-lpm quirk for Raydium touchscreens
usb: quirks: Add delay-init quirk for Corsair K70 LUX RGB
USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub
usb: dwc3: gadget: Properly check last unaligned/zero chain TRB
usb: dwc3: core: Clean up ULPI device
Linus Torvalds [Thu, 22 Nov 2018 16:35:30 +0000 (08:35 -0800)]
Merge tag 'mtd/fixes-for-4.20-rc4' of git://git.infradead.org/linux-mtd
Pull mtd fixes from Boris Brezillon:
"SPI NOR fixes:
- Various fixes related to the SFDP parsing code merged in 4.20
- Fix for a page fault in the cadence-qspi
NAND fixes:
- Fix a macro name conflict between the QCOM NAND controller driver
and the RISC-V asm headers
- Fix of-node handling in the atmel driver"
* tag 'mtd/fixes-for-4.20-rc4' of git://git.infradead.org/linux-mtd:
mtd: spi-nor: fix selection of uniform erase type in flexible conf
mtd: spi-nor: Fix Cadence QSPI page fault kernel panic
mtd: rawnand: qcom: Namespace prefix some commands
mtd: rawnand: atmel: fix OF child-node lookup
mtd: spi_nor: pass DMA-able buffer to spi_nor_read_raw()
mtd: spi-nor: don't overwrite errno in spi_nor_get_map_in_use()
mtd: spi-nor: fix iteration over smpt array
mtd: spi-nor: don't drop sfdp data if optional parsers fail
Linus Torvalds [Thu, 22 Nov 2018 16:31:46 +0000 (08:31 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes.
The qla2xxx is a regression from 4.18 and the ufs one is a device
enablement fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: Fix hynix ufs bug with quirk on hi36xx SoC
scsi: qla2xxx: Timeouts occur on surprise removal of QLogic adapter
Pan Bian [Wed, 21 Nov 2018 09:53:47 +0000 (17:53 +0800)]
iommu/vt-d: Use memunmap to free memremap
memunmap() should be used to free the return of memremap(), not
iounmap().
Fixes: dfddb969edf0 ('iommu/vt-d: Switch from ioremap_cache to memremap')
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Dave Airlie [Thu, 22 Nov 2018 01:19:20 +0000 (11:19 +1000)]
Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
- OD fixes for powerplay
- Vega20 fixes
- KFD fix for Kaveri
- add missing firmware declaration for hainan (SI chip)
- Fix DC user experience regressions related to panels that support >8 bpc
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121163647.2847-1-alexander.deucher@amd.com
Dave Airlie [Thu, 22 Nov 2018 01:17:46 +0000 (11:17 +1000)]
Merge tag 'drm-misc-fixes-2018-11-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- vc4: Fix NULL deref in async path (Boris)
- vc4: Avoid taking async path for cursor updates when impossible (Boris)
- udmabuf: Fix mmap with PROT_WRITE (Gerd)
- fb-helper: Don't use writeback connectors for fbdev (Paul)
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121155248.GA241511@art_vandelay
Y.C. Chen [Tue, 30 Oct 2018 03:34:46 +0000 (11:34 +0800)]
drm/ast: fixed cursor may disappear sometimes
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Vincent Chen [Wed, 21 Nov 2018 01:38:11 +0000 (09:38 +0800)]
net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts
In the original ftmac100_interrupt(), the interrupts are only disabled when
the condition "netif_running(netdev)" is true. However, this condition
causes kerenl hang in the following case. When the user requests to
disable the network device, kernel will clear the bit __LINK_STATE_START
from the dev->state and then call the driver's ndo_stop function. Network
device interrupts are not blocked during this process. If an interrupt
occurs between clearing __LINK_STATE_START and stopping network device,
kernel cannot disable the interrupts due to the condition
"netif_running(netdev)" in the ISR. Hence, kernel will hang due to the
continuous interruption of the network device.
In order to solve the above problem, the interrupts of the network device
should always be disabled in the ISR without being restricted by the
condition "netif_running(netdev)".
[V2]
Remove unnecessary curly braces.
Signed-off-by: Vincent Chen <vincentc@andestech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Y.C. Chen [Wed, 3 Oct 2018 06:57:47 +0000 (14:57 +0800)]
drm/ast: change resolution may cause screen blurred
The value of pitches is not correct while calling mode_set.
The issue we found so far on following system:
- Debian8 with XFCE Desktop
- Ubuntu with KDE Desktop
- SUSE15 with KDE Desktop
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Cc: <stable@vger.kernel.org>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
David S. Miller [Thu, 22 Nov 2018 00:14:56 +0000 (16:14 -0800)]
Merge branch 'smc-fixes'
Ursula Braun says:
====================
net/smc: fixes 2018-11-12
here is V4 of some net/smc fixes in different areas for the net tree.
v1->v2:
do not define 8-byte alignment for union smcd_cdc_cursor in
patch 4/5 "net/smc: atomic SMCD cursor handling"
v2->v3:
stay with 8-byte alignment for union smcd_cdc_cursor in
patch 4/5 "net/smc: atomic SMCD cursor handling", but get rid of
__packed for struct smcd_cdc_msg
v3->v4:
get rid of another __packed for struct smc_cdc_msg in
patch 4/5 "net/smc: atomic SMCD cursor handling"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Tue, 20 Nov 2018 15:46:43 +0000 (16:46 +0100)]
net/smc: use after free fix in smc_wr_tx_put_slot()
In smc_wr_tx_put_slot() field pend->idx is used after being
cleared. That means always idx 0 is cleared in the wr_tx_mask.
This results in a broken administration of available WR send
payload buffers.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Tue, 20 Nov 2018 15:46:42 +0000 (16:46 +0100)]
net/smc: atomic SMCD cursor handling
Running uperf tests with SMCD on LPARs results in corrupted cursors.
SMCD cursors should be treated atomically to fix cursor corruption.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hans Wippel [Tue, 20 Nov 2018 15:46:41 +0000 (16:46 +0100)]
net/smc: add SMC-D shutdown signal
When a SMC-D link group is freed, a shutdown signal should be sent to
the peer to indicate that the link group is invalid. This patch adds the
shutdown signal to the SMC code.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Karsten Graul [Tue, 20 Nov 2018 15:46:40 +0000 (16:46 +0100)]
net/smc: use queue pair number when matching link group
When searching for an existing link group the queue pair number is also
to be taken into consideration. When the SMC server sends a new number
in a CLC packet (keeping all other values equal) then a new link group
is to be created on the SMC client side.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hans Wippel [Tue, 20 Nov 2018 15:46:39 +0000 (16:46 +0100)]
net/smc: abort CLC connection in smc_release
In case of a non-blocking SMC socket, the initial CLC handshake is
performed over a blocking TCP connection in a worker. If the SMC socket
is released, smc_release has to wait for the blocking CLC socket
operations (e.g., kernel_connect) inside the worker.
This patch aborts a CLC connection when the respective non-blocking SMC
socket is released to avoid waiting on socket operations or timeouts.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 21 Nov 2018 23:51:16 +0000 (15:51 -0800)]
Merge tag 'wireless-drivers-for-davem-2018-11-20' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.20
First set of fixes for 4.20, this time we have quite a few them but
all very small.
ath9k
* fix a locking regression found by a static checker
wlcore
* fix a crash which was a regression with wakeirq handling
brcm80211
* yet another fix for 160 MHz channel handling
mt76
* fix a longstaning build problem when CONFIG_LEDS_CLASS is disabled
* don't use uninitialised mutex
iwlwifi
* do note that the iwlwifi merge tag (commit
4ec321c14693) seems to
contain wrong list of changes so ignore that
* fix ACPI data handling, a memory leak and other smaller fixes
ath10k
* fix a crash during suspend which was a recent regression
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 20 Nov 2018 13:53:59 +0000 (05:53 -0800)]
tcp: defer SACK compression after DupThresh
Jean-Louis reported a TCP regression and bisected to recent SACK
compression.
After a loss episode (receiver not able to keep up and dropping
packets because its backlog is full), linux TCP stack is sending
a single SACK (DUPACK).
Sender waits a full RTO timer before recovering losses.
While RFC 6675 says in section 5, "Algorithm Details",
(2) If DupAcks < DupThresh but IsLost (HighACK + 1) returns true --
indicating at least three segments have arrived above the current
cumulative acknowledgment point, which is taken to indicate loss
-- go to step (4).
...
(4) Invoke fast retransmit and enter loss recovery as follows:
there are old TCP stacks not implementing this strategy, and
still counting the dupacks before starting fast retransmit.
While these stacks probably perform poorly when receivers implement
LRO/GRO, we should be a little more gentle to them.
This patch makes sure we do not enable SACK compression unless
3 dupacks have been sent since last rcv_nxt update.
Ideally we should even rearm the timer to send one or two
more DUPACK if no more packets are coming, but that will
be work aiming for linux-4.21.
Many thanks to Jean-Louis for bisecting the issue, providing
packet captures and testing this patch.
Fixes: 5d9f4262b7ea ("tcp: add SACK compression")
Reported-by: Jean-Louis Dupond <jean-louis@dupond.be>
Tested-by: Jean-Louis Dupond <jean-louis@dupond.be>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 21 Nov 2018 21:53:17 +0000 (13:53 -0800)]
tools: bpftool: fix potential NULL pointer dereference in do_load
This patch fixes a possible null pointer dereference in
do_load, detected by the semantic patch deref_null.cocci,
with the following warning:
./tools/bpf/bpftool/prog.c:1021:23-25: ERROR: map_replace is NULL but dereferenced.
The following code has potential null pointer references:
881 map_replace = reallocarray(map_replace, old_map_fds + 1,
882 sizeof(*map_replace));
883 if (!map_replace) {
884 p_err("mem alloc failed");
885 goto err_free_reuse_maps;
886 }
...
1019 err_free_reuse_maps:
1020 for (i = 0; i < old_map_fds; i++)
1021 close(map_replace[i].fd);
1022 free(map_replace);
Fixes: 3ff5a4dc5d89 ("tools: bpftool: allow reuse of maps with bpftool prog load")
Co-developed-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Petr Machata [Tue, 20 Nov 2018 11:39:56 +0000 (11:39 +0000)]
net: skb_scrub_packet(): Scrub offload_fwd_mark
When a packet is trapped and the corresponding SKB marked as
already-forwarded, it retains this marking even after it is forwarded
across veth links into another bridge. There, since it ingresses the
bridge over veth, which doesn't have offload_fwd_mark, it triggers a
warning in nbp_switchdev_frame_mark().
Then nbp_switchdev_allowed_egress() decides not to allow egress from
this bridge through another veth, because the SKB is already marked, and
the mark (of 0) of course matches. Thus the packet is incorrectly
blocked.
Solve by resetting offload_fwd_mark() in skb_scrub_packet(). That
function is called from tunnels and also from veth, and thus catches the
cases where traffic is forwarded between bridges and transformed in a
way that invalidates the marking.
Fixes: 6bc506b4fb06 ("bridge: switchdev: Add forward mark support for stacked devices")
Fixes: abf4bb6b63d0 ("skbuff: Add the offload_mr_fwd_mark field")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Suggested-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 21 Nov 2018 19:28:20 +0000 (11:28 -0800)]
Merge tag 'riscv-for-linus-4.20-rc4' of git://git./linux/kernel/git/palmer/riscv-linux
Pull RISC-V fixes from Palmer Dabbelt:
"This week is a bit bigger than I expected. That's my fault, as I
missed a few patches while I was at Plumbers last week. We have:
- A fix to a quite embarassing issue where raw_copy_to_user() was
implemented with asm_copy_from_user() (and vice versa).
- Improvements to our makefile to allow flat binaries to be
generated.
- A build fix that predeclares "struct module" at the top of
<asm/module.h>, which triggers warnings later in that header.
- The addition of our own <uapi/asm/unistd> header, which is
necessary to align our stat ABI on 32-bit systems.
- A fix to avoid printing a warning when the S or U bits are set in
print_isa().
I already have one patch in the queue for next week"
* tag 'riscv-for-linus-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
RISC-V: recognize S/U mode bits in print_isa
riscv: add asm/unistd.h UAPI header
riscv: fix warning in arch/riscv/include/asm/module.h
RISC-V: Build flat and compressed kernel images
RISC-V: Fix raw_copy_{to,from}_user()
Dave Chinner [Wed, 21 Nov 2018 16:06:37 +0000 (08:06 -0800)]
iomap: readpages doesn't zero page tail beyond EOF
When we read the EOF page of the file via readpages, we need
to zero the region beyond EOF that we either do not read or
should not contain data so that mmap does not expose stale data to
user applications.
However, iomap_adjust_read_range() fails to detect EOF correctly,
and so fsx on 1k block size filesystems fails very quickly with
mapreads exposing data beyond EOF. There are two problems here.
Firstly, when calculating the end block of the EOF byte, we have
to round the size by one to avoid a block aligned EOF from reporting
a block too large. i.e. a size of 1024 bytes is 1 block, which in
index terms is block 0. Therefore we have to calculate the end block
from (isize - 1), not isize.
The second bug is determining if the current page spans EOF, and so
whether we need split it into two half, one for the IO, and the
other for zeroing. Unfortunately, the code that checks whether
we should split the block doesn't actually check if we span EOF, it
just checks if the read spans the /offset in the page/ that EOF
sits on. So it splits every read into two if EOF is not page
aligned, regardless of whether we are reading the EOF block or not.
Hence we need to restrict the "does the read span EOF" check to
just the page that spans EOF, not every page we read.
This patch results in correct EOF detection through readpages:
xfs_vm_readpages: dev 259:0 ino 0x43 nr_pages 24
xfs_iomap_found: dev 259:0 ino 0x43 size 0x66c00 offset 0x4f000 count 98304 type hole startoff 0x13c startblock 1368 blockcount 0x4
iomap_readpage_actor: orig pos 323584 pos 323584, length 4096, poff 0 plen 4096, isize 420864
xfs_iomap_found: dev 259:0 ino 0x43 size 0x66c00 offset 0x50000 count 94208 type hole startoff 0x140 startblock 1497 blockcount 0x5c
iomap_readpage_actor: orig pos 327680 pos 327680, length 94208, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 331776 pos 331776, length 90112, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 335872 pos 335872, length 86016, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 339968 pos 339968, length 81920, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 344064 pos 344064, length 77824, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 348160 pos 348160, length 73728, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 352256 pos 352256, length 69632, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 356352 pos 356352, length 65536, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 360448 pos 360448, length 61440, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 364544 pos 364544, length 57344, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 368640 pos 368640, length 53248, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 372736 pos 372736, length 49152, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 376832 pos 376832, length 45056, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 380928 pos 380928, length 40960, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 385024 pos 385024, length 36864, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 389120 pos 389120, length 32768, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 393216 pos 393216, length 28672, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 397312 pos 397312, length 24576, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 401408 pos 401408, length 20480, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 405504 pos 405504, length 16384, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 409600 pos 409600, length 12288, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 413696 pos 413696, length 8192, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 417792 pos 417792, length 4096, poff 0 plen 3072, isize 420864
iomap_readpage_actor: orig pos 420864 pos 420864, length 1024, poff 3072 plen 1024, isize 420864
As you can see, it now does full page reads until the last one which
is split correctly at the block aligned EOF, reading 3072 bytes and
zeroing the last 1024 bytes. The original version of the patch got
this right, but it got another case wrong.
The EOF detection crossing really needs to the the original length
as plen, while it starts at the end of the block, will be shortened
as up-to-date blocks are found on the page. This means "orig_pos +
plen" no longer points to the end of the page, and so will not
correctly detect EOF crossing. Hence we have to use the length
passed in to detect this partial page case:
xfs_filemap_fault: dev 259:1 ino 0x43 write_fault 0
xfs_vm_readpage: dev 259:1 ino 0x43 nr_pages 1
xfs_iomap_found: dev 259:1 ino 0x43 size 0x2cc00 offset 0x2c000 count 4096 type hole startoff 0xb0 startblock 282 blockcount 0x4
iomap_readpage_actor: orig pos 180224 pos 181248, length 4096, poff 1024 plen 2048, isize 183296
xfs_iomap_found: dev 259:1 ino 0x43 size 0x2cc00 offset 0x2cc00 count 1024 type hole startoff 0xb3 startblock 285 blockcount 0x1
iomap_readpage_actor: orig pos 183296 pos 183296, length 1024, poff 3072 plen 1024, isize 183296
Heere we see a trace where the first block on the EOF page is up to
date, hence poff = 1024 bytes. The offset into the page of EOF is
3072, so the range we want to read is 1024 - 3071, and the range we
want to zero is 3072 - 4095. You can see this is split correctly
now.
This fixes the stale data beyond EOF problem that fsx quickly
uncovers on 1k block size filesystems.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Dave Chinner [Mon, 19 Nov 2018 21:31:12 +0000 (13:31 -0800)]
vfs: vfs_dedupe_file_range() doesn't return EOPNOTSUPP
It returns EINVAL when the operation is not supported by the
filesystem. Fix it to return EOPNOTSUPP to be consistent with
the man page and clone_file_range().
Clean up the inconsistent error return handling while I'm there.
(I know, lipstick on a pig, but every little bit helps...)
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Dave Chinner [Mon, 19 Nov 2018 21:31:11 +0000 (13:31 -0800)]
iomap: dio data corruption and spurious errors when pipes fill
When doing direct IO to a pipe for do_splice_direct(), then pipe is
trivial to fill up and overflow as it can only hold 16 pages. At
this point bio_iov_iter_get_pages() then returns -EFAULT, and we
abort the IO submission process. Unfortunately, iomap_dio_rw()
propagates the error back up the stack.
The error is converted from the EFAULT to EAGAIN in
generic_file_splice_read() to tell the splice layers that the pipe
is full. do_splice_direct() completely fails to handle EAGAIN errors
(it aborts on error) and returns EAGAIN to the caller.
copy_file_write() then completely fails to handle EAGAIN as well,
and so returns EAGAIN to userspace, having failed to copy the data
it was asked to.
Avoid this whole steaming pile of fail by having iomap_dio_rw()
silently swallow EFAULT errors and so do short reads.
To make matters worse, iomap_dio_actor() has a stale data exposure
bug bio_iov_iter_get_pages() fails - it does not zero the tail block
that it may have been left uncovered by partial IO. Fix the error
handling case to drop to the sub-block zeroing rather than
immmediately returning the -EFAULT error.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Dave Chinner [Mon, 19 Nov 2018 21:31:10 +0000 (13:31 -0800)]
iomap: sub-block dio needs to zeroout beyond EOF
If we are doing sub-block dio that extends EOF, we need to zero
the unused tail of the block to initialise the data in it it. If we
do not zero the tail of the block, then an immediate mmap read of
the EOF block will expose stale data beyond EOF to userspace. Found
with fsx running sub-block DIO sizes vs MAPREAD/MAPWRITE operations.
Fix this by detecting if the end of the DIO write is beyond EOF
and zeroing the tail if necessary.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Dave Chinner [Mon, 19 Nov 2018 21:31:10 +0000 (13:31 -0800)]
iomap: FUA is wrong for DIO O_DSYNC writes into unwritten extents
When we write into an unwritten extent via direct IO, we dirty
metadata on IO completion to convert the unwritten extent to
written. However, when we do the FUA optimisation checks, the inode
may be clean and so we issue a FUA write into the unwritten extent.
This means we then bypass the generic_write_sync() call after
unwritten extent conversion has ben done and we don't force the
modified metadata to stable storage.
This violates O_DSYNC semantics. The window of exposure is a single
IO, as the next DIO write will see the inode has dirty metadata and
hence will not use the FUA optimisation. Calling
generic_write_sync() after completion of the second IO will also
sync the first write and it's metadata.
Fix this by avoiding the FUA optimisation when writing to unwritten
extents.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Dave Chinner [Tue, 20 Nov 2018 06:50:08 +0000 (22:50 -0800)]
xfs: delalloc -> unwritten COW fork allocation can go wrong
Long saga. There have been days spent following this through dead end
after dead end in multi-GB event traces. This morning, after writing
a trace-cmd wrapper that enabled me to be more selective about XFS
trace points, I discovered that I could get just enough essential
tracepoints enabled that there was a 50:50 chance the fsx config
would fail at ~115k ops. If it didn't fail at op 115547, I stopped
fsx at op 115548 anyway.
That gave me two traces - one where the problem manifested, and one
where it didn't. After refining the traces to have the necessary
information, I found that in the failing case there was a real
extent in the COW fork compared to an unwritten extent in the
working case.
Walking back through the two traces to the point where the CWO fork
extents actually diverged, I found that the bad case had an extra
unwritten extent in it. This is likely because the bug it led me to
had triggered multiple times in those 115k ops, leaving stray
COW extents around. What I saw was a COW delalloc conversion to an
unwritten extent (as they should always be through
xfs_iomap_write_allocate()) resulted in a /written extent/:
xfs_writepage: dev 259:0 ino 0x83 pgoff 0x17000 size 0x79a00 offset 0 length 0
xfs_iext_remove: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/2 offset 32 block 152 count 20 flag 1 caller xfs_bmap_add_extent_delay_real
xfs_bmap_pre_update: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/1 offset 1 block
4503599627239429 count 31 flag 0 caller xfs_bmap_add_extent_delay_real
xfs_bmap_post_update: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/1 offset 1 block 121 count 51 flag 0 caller xfs_bmap_add_ex
Basically, Cow fork before:
0 1 32 52
+H+
DDDDDDDDDDDD+UUUUUUUUUUU+
PREV RIGHT
COW delalloc conversion allocates:
1 32
+uuuuuuuuuuuu+
NEW
And the result according to the xfs_bmap_post_update trace was:
0 1 32 52
+H+wwwwwwwwwwwwwwwwwwwwwwww+
PREV
Which is clearly wrong - it should be a merged unwritten extent,
not an unwritten extent.
That lead me to look at the LEFT_FILLING|RIGHT_FILLING|RIGHT_CONTIG
case in xfs_bmap_add_extent_delay_real(), and sure enough, there's
the bug.
It takes the old delalloc extent (PREV) and adds the length of the
RIGHT extent to it, takes the start block from NEW, removes the
RIGHT extent and then updates PREV with the new extent.
What it fails to do is update PREV.br_state. For delalloc, this is
always XFS_EXT_NORM, while in this case we are converting the
delayed allocation to unwritten, so it needs to be updated to
XFS_EXT_UNWRITTEN. This LF|RF|RC case does not do this, and so
the resultant extent is always written.
And that's the bug I've been chasing for a week - a bmap btree bug,
not a reflink/dedupe/copy_file_range bug, but a BMBT bug introduced
with the recent in core extent tree scalability enhancements.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Dave Chinner [Mon, 19 Nov 2018 21:31:10 +0000 (13:31 -0800)]
xfs: flush removing page cache in xfs_reflink_remap_prep
On a sub-page block size filesystem, fsx is failing with a data
corruption after a series of operations involving copying a file
with the destination offset beyond EOF of the destination of the file:
8093(157 mod 256): TRUNCATE DOWN from 0x7a120 to 0x50000 ******WWWW
8094(158 mod 256): INSERT 0x25000 thru 0x25fff (0x1000 bytes)
8095(159 mod 256): COPY 0x18000 thru 0x1afff (0x3000 bytes) to 0x2f400
8096(160 mod 256): WRITE 0x5da00 thru 0x651ff (0x7800 bytes) HOLE
8097(161 mod 256): COPY 0x2000 thru 0x5fff (0x4000 bytes) to 0x6fc00
The second copy here is beyond EOF, and it is to sub-page (4k) but
block aligned (1k) offset. The clone runs the EOF zeroing, landing
in a pre-existing post-eof delalloc extent. This zeroes the post-eof
extents in the page cache just fine, dirtying the pages correctly.
The problem is that xfs_reflink_remap_prep() now truncates the page
cache over the range that it is copying it to, and rounds that down
to cover the entire start page. This removes the dirty page over the
delalloc extent from the page cache without having written it back.
Hence later, when the page cache is flushed, the page at offset
0x6f000 has not been written back and hence exposes stale data,
which fsx trips over less than 10 operations later.
Fix this by changing xfs_reflink_remap_prep() to use
xfs_flush_unmap_range().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Jens Axboe [Wed, 21 Nov 2018 12:56:28 +0000 (05:56 -0700)]
Merge branch 'nvme-4.20' of git://git.infradead.org/nvme into for-linus
Pull NVMe fix from Christoph.
* 'nvme-4.20' of git://git.infradead.org/nvme:
nvme-fc: resolve io failures during connect
Rafael J. Wysocki [Wed, 21 Nov 2018 12:33:06 +0000 (13:33 +0100)]
Merge tag 'linux-cpupower-4.20-rc4' of git://git./linux/kernel/git/shuah/linux
Pull cpupower utility updates for 4.20-rc4 from Shuah Khan:
"This cpupower update for Linux 4.20-rc4 consists of compile fixes to allow
use of outside build flags and override of CFLAGS from Jiri Olsa, and fix
to compilation with STATIC=true from Konstantin Khlebnikov."
* tag 'linux-cpupower-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
tools cpupower: Override CFLAGS assignments
tools cpupower debug: Allow to use outside build flags
tools/power/cpupower: fix compilation with STATIC=true
Ville Syrjälä [Tue, 20 Nov 2018 13:54:50 +0000 (15:54 +0200)]
drm/i915: Add rotation readout for plane initial config
If we need to force a full plane update before userspace/fbdev
have given us a proper plane state we should try to maintain the
current plane state as much as possible (apart from the parts
of the state we're trying to fix up with the plane update).
To that end add basic readout for the plane rotation and
maintain it during the initial fb takeover.
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 516a49cc1946 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120135450.3634-2-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit
f43348a3db89305bb1935da9fe4499fdcdde9796)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Ville Syrjälä [Tue, 20 Nov 2018 13:54:49 +0000 (15:54 +0200)]
drm/i915: Force a LUT update in intel_initial_commit()
If we force a plane update to fix up our half populated plane state
we'll also force on the pipe gamma for the plane (since we always
enable pipe gamma currently). If the BIOS hasn't programmed a sensible
LUT into the hardware this will cause the image to become corrupted.
Typical symptoms are a purple/yellow/etc. flash when the driver loads.
To avoid this let's program something sensible into the LUT when
we do the plane update. In the future I plan to add proper plane
gamma enable readout so this is just a temporary measure.
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 516a49cc1946 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120135450.3634-1-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit
fa6af5145b4e87a30a530be0d80734a9dd40da77)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Hans de Goede [Mon, 19 Nov 2018 18:06:01 +0000 (19:06 +0100)]
ACPI / platform: Add SMB0001 HID to forbidden_id_list
Many HP AMD based laptops contain an SMB0001 device like this:
Device (SMBD)
{
Name (_HID, "SMB0001") // _HID: Hardware ID
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
IO (Decode16,
0x0B20, // Range Minimum
0x0B20, // Range Maximum
0x20, // Alignment
0x20, // Length
)
IRQ (Level, ActiveLow, Shared, )
{7}
})
}
The legacy style IRQ resource here causes acpi_dev_get_irqresource() to
be called with legacy=true and this message to show in dmesg:
ACPI: IRQ 7 override to edge, high
This causes issues when later on the AMD0030 GPIO device gets enumerated:
Device (GPIO)
{
Name (_HID, "AMDI0030") // _HID: Hardware ID
Name (_CID, "AMDI0030") // _CID: Compatible ID
Name (_UID, Zero) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, )
{
0x00000007,
}
Memory32Fixed (ReadWrite,
0xFED81500, // Address Base
0x00000400, // Address Length
)
})
Return (RBUF) /* \_SB_.GPIO._CRS.RBUF */
}
}
Now acpi_dev_get_irqresource() gets called with legacy=false, but because
of the earlier override of the trigger-type acpi_register_gsi() returns
-EBUSY (because we try to register the same interrupt with a different
trigger-type) and we end up setting IORESOURCE_DISABLED in the flags.
The setting of IORESOURCE_DISABLED causes platform_get_irq() to call
acpi_irq_get() which is not implemented on x86 and returns -EINVAL.
resulting in the following in dmesg:
amd_gpio AMDI0030:00: Failed to get gpio IRQ: -22
amd_gpio: probe of AMDI0030:00 failed with error -22
The SMB0001 is a "virtual" device in the sense that the only way the OS
interacts with it is through calling a couple of methods to do SMBus
transfers. As such it is weird that it has IO and IRQ resources at all,
because the driver for it is not expected to ever access the hardware
directly.
The Linux driver for the SMB0001 device directly binds to the acpi_device
through the acpi_bus, so we do not need to instantiate a platform_device
for this ACPI device. This commit adds the SMB0001 HID to the
forbidden_id_list, avoiding the instantiating of a platform_device for it.
Not instantiating a platform_device means we will no longer call
acpi_dev_get_irqresource() for the legacy IRQ resource fixing the probe of
the AMDI0030 device failing.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1644013
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198715
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199523
Reported-by: Lukas Kahnert <openproggerfreak@gmail.com>
Tested-by: Marc <suaefar@googlemail.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Paul Kocialkowski [Thu, 15 Nov 2018 16:32:48 +0000 (17:32 +0100)]
drm/fb-helper: Blacklist writeback when adding connectors to fbdev
Writeback connectors do not produce any on-screen output and require
special care for use. Such connectors are hidden from enumeration in
DRM resources by default, but they are still picked-up by fbdev.
This makes rather little sense since fbdev is not really adapted for
dealing with writeback.
Moreover, this is also a source of issues when userspace disables the
CRTC (and associated plane) without detaching the CRTC from the
connector (which is hidden by default). In this case, the connector is
still using the CRTC, leading to am "enabled/connectors mismatch" and
eventually the failure of the associated atomic commit. This situation
happens with VC4 testing under IGT GPU Tools.
Filter out writeback connectors in the fbdev helper to solve this.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
Fixes: 935774cd71fe ("drm: Add writeback connector type")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115163248.21168-1-paul.kocialkowski@bootlin.com
Chris Wilson [Mon, 19 Nov 2018 15:41:53 +0000 (15:41 +0000)]
drm/i915: Write GPU relocs harder with gen3
Under moderate amounts of GPU stress, we can observe on Bearlake and
Pineview (later gen3 models) that we execute the following batch buffer
before the write into the batch is coherent. Adding extra (tested with
upto 32x) MI_FLUSH to either the invalidation, flush or both phases does
not solve the incoherency issue with the relocations, but emitting the
MI_STORE_DWORD_IMM twice does. So be it.
Fixes: 7dd4f6729f92 ("drm/i915: Async GPU relocation processing")
Testcase: igt/gem_tiled_fence_blits # blb/pnv
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181119154153.15327-1-chris@chris-wilson.co.uk
(cherry picked from commit
7fa28e146994da1e8a4124623d7da97b798ea520)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Davide Caratti [Tue, 20 Nov 2018 21:18:44 +0000 (22:18 +0100)]
net/sched: act_police: fix race condition on state variables
after 'police' configuration parameters were converted to use RCU instead
of spinlock, the state variables used to compute the traffic rate (namely
'tcfp_toks', 'tcfp_ptoks' and 'tcfp_t_c') are erroneously read/updated in
the traffic path without any protection.
Use a dedicated spinlock to avoid race conditions on these variables, and
ensure proper cache-line alignment. In this way, 'police' is still faster
than what we observed when 'tcf_lock' was used in the traffic path _ i.e.
reverting commit
2d550dbad83c ("net/sched: act_police: don't use spinlock
in the data path"). Moreover, we preserve the throughput improvement that
was obtained after 'police' started using per-cpu counters, when 'avrate'
is used instead of 'rate'.
Changes since v1 (thanks to Eric Dumazet):
- call ktime_get_ns() before acquiring the lock in the traffic path
- use a dedicated spinlock instead of tcf_lock
- improve cache-line usage
Fixes: 2d550dbad83c ("net/sched: act_police: don't use spinlock in the data path")
Reported-and-suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Linus Torvalds [Tue, 20 Nov 2018 22:31:00 +0000 (14:31 -0800)]
Merge tag 'mips_fixes_4.20_3' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A few MIPS fixes for 4.20:
- Re-enable the Cavium Octeon USB driver in its defconfig after it
was accidentally removed back in 4.14.
- Have early memblock allocations be performed bottom-up to more
closely match the behaviour we used to have with bootmem, which
seems a safer choice since we've seen fallout from the change made
in the 4.20 merge window.
- Simplify max_low_pfn calculation in the NUMA code for the Loongson3
and SGI IP27 platforms to both clean up the code & ensure
max_low_pfn has been set appropriately before it is used"
* tag 'mips_fixes_4.20_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Loongson3,SGI-IP27: Simplify max_low_pfn calculation
MIPS: Let early memblock_alloc*() allocate memories bottom-up
MIPS: OCTEON: cavium_octeon_defconfig: re-enable OCTEON USB driver
Heiner Kallweit [Tue, 20 Nov 2018 20:22:50 +0000 (21:22 +0100)]
MAINTAINERS: add myself as co-maintainer for r8169
Meanwhile I know the driver quite well and I refactored bigger parts
of it. As a result people contact me already with r8169 questions.
Therefore I'd volunteer to become co-maintainer of the driver also
officially.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kenneth Feng [Mon, 19 Nov 2018 06:49:16 +0000 (14:49 +0800)]
drm/amdgpu: Enable HDP memory light sleep
Due to the register name and setting change of HDP
memory light sleep on Vega20,change accordingly in
the driver.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Chinner [Mon, 19 Nov 2018 21:31:09 +0000 (13:31 -0800)]
xfs: extent shifting doesn't fully invalidate page cache
The extent shifting code uses a flush and invalidate mechainsm prior
to shifting extents around. This is similar to what
xfs_free_file_space() does, but it doesn't take into account things
like page cache vs block size differences, and it will fail if there
is a page that it currently busy.
xfs_flush_unmap_range() handles all of these cases, so just convert
xfs_prepare_shift() to us that mechanism rather than having it's own
special sauce.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Dave Chinner [Mon, 19 Nov 2018 21:31:08 +0000 (13:31 -0800)]
xfs: finobt AG reserves don't consider last AG can be a runt
The last AG may be very small comapred to all other AGs, and hence
AG reservations based on the superblock AG size may actually consume
more space than the AG actually has. This results on assert failures
like:
XFS: Assertion failed: xfs_perag_resv(pag, XFS_AG_RESV_METADATA)->ar_reserved + xfs_perag_resv(pag, XFS_AG_RESV_RMAPBT)->ar_reserved <= pag->pagf_freeblks + pag->pagf_flcount, file: fs/xfs/libxfs/xfs_ag_resv.c, line: 319
[ 48.932891] xfs_ag_resv_init+0x1bd/0x1d0
[ 48.933853] xfs_fs_reserve_ag_blocks+0x37/0xb0
[ 48.934939] xfs_mountfs+0x5b3/0x920
[ 48.935804] xfs_fs_fill_super+0x462/0x640
[ 48.936784] ? xfs_test_remount_options+0x60/0x60
[ 48.937908] mount_bdev+0x178/0x1b0
[ 48.938751] mount_fs+0x36/0x170
[ 48.939533] vfs_kern_mount.part.43+0x54/0x130
[ 48.940596] do_mount+0x20e/0xcb0
[ 48.941396] ? memdup_user+0x3e/0x70
[ 48.942249] ksys_mount+0xba/0xd0
[ 48.943046] __x64_sys_mount+0x21/0x30
[ 48.943953] do_syscall_64+0x54/0x170
[ 48.944835] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Hence we need to ensure the finobt per-ag space reservations take
into account the size of the last AG rather than treat it like all
the other full size AGs.
Note that both refcountbt and rmapbt already take the size of the AG
into account via reading the AGF length directly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Dave Chinner [Mon, 19 Nov 2018 21:31:08 +0000 (13:31 -0800)]
xfs: fix transient reference count error in xfs_buf_resubmit_failed_buffers
When retrying a failed inode or dquot buffer,
xfs_buf_resubmit_failed_buffers() clears all the failed flags from
the inde/dquot log items. In doing so, it also drops all the
reference counts on the buffer that the failed log items hold. This
means it can drop all the active references on the buffer and hence
free the buffer before it queues it for write again.
Putting the buffer on the delwri queue takes a reference to the
buffer (so that it hangs around until it has been written and
completed), but this goes bang if the buffer has already been freed.
Hence we need to add the buffer to the delwri queue before we remove
the failed flags from the log items attached to the buffer to ensure
it always remains referenced during the resubmit process.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Dave Chinner [Mon, 19 Nov 2018 21:31:07 +0000 (13:31 -0800)]
xfs: uncached buffer tracing needs to print bno
Useless:
xfs_buf_get_uncached: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_unlock: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_submit: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_hold: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_iowait: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_iodone: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_iowait_done: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_rele: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
Useful:
xfs_buf_get_uncached: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_unlock: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ...
xfs_buf_submit: dev 253:32 bno 0x200b5 nblks 0x1 ...
xfs_buf_hold: dev 253:32 bno 0x200b5 nblks 0x1 ...
xfs_buf_iowait: dev 253:32 bno 0x200b5 nblks 0x1 ...
xfs_buf_iodone: dev 253:32 bno 0x200b5 nblks 0x1 ...
xfs_buf_iowait_done: dev 253:32 bno 0x200b5 nblks 0x1 ...
xfs_buf_rele: dev 253:32 bno 0x200b5 nblks 0x1 ...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Stephen Mallon [Tue, 20 Nov 2018 08:15:02 +0000 (19:15 +1100)]
tcp: Fix SOF_TIMESTAMPING_RX_HARDWARE to use the latest timestamp during TCP coalescing
During tcp coalescing ensure that the skb hardware timestamp refers to the
highest sequence number data.
Previously only the software timestamp was updated during coalescing.
Signed-off-by: Stephen Mallon <stephen.mallon@sydney.edu.au>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Siva Reddy Kallam [Tue, 20 Nov 2018 04:34:04 +0000 (10:04 +0530)]
tg3: Add PHY reset for 5717/5719/5720 in change ring and flow control paths
This patch has the fix to avoid PHY lockup with 5717/5719/5720 in change
ring and flow control paths. This patch solves the RX hang while doing
continuous ring or flow control parameters with heavy traffic from peer.
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Will Deacon [Mon, 19 Nov 2018 11:07:18 +0000 (11:07 +0000)]
Documentation/security-bugs: Postpone fix publication in exceptional cases
At the request of the reporter, the Linux kernel security team offers to
postpone the publishing of a fix for up to 5 business days from the date
of a report.
While it is generally undesirable to keep a fix private after it has
been developed, this short window is intended to allow distributions to
package the fix into their kernel builds and permits early inclusion of
the security team in the case of a co-ordinated disclosure with other
parties. Unfortunately, discussions with major Linux distributions and
cloud providers has revealed that 5 business days is not sufficient to
achieve either of these two goals.
As an example, cloud providers need to roll out KVM security fixes to a
global fleet of hosts with sufficient early ramp-up and monitoring. An
end-to-end timeline of less than two weeks dramatically cuts into the
amount of early validation and increases the chance of guest-visible
regressions.
The consequence of this timeline mismatch is that security issues are
commonly fixed without the involvement of the Linux kernel security team
and are instead analysed and addressed by an ad-hoc group of developers
across companies contributing to Linux. In some cases, mainline (and
therefore the official stable kernels) can be left to languish for
extended periods of time. This undermines the Linux kernel security
process and puts upstream developers in a difficult position should they
find themselves involved with an undisclosed security problem that they
are unable to report due to restrictions from their employer.
To accommodate the needs of these users of the Linux kernel and
encourage them to engage with the Linux security team when security
issues are first uncovered, extend the maximum period for which fixes
may be delayed to 7 calendar days, or 14 calendar days in exceptional
cases, where the logistics of QA and large scale rollouts specifically
need to be accommodated. This brings parity with the linux-distros@
maximum embargo period of 14 calendar days.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Amit Shah <aams@amazon.com>
Cc: Laura Abbott <labbott@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 15 Nov 2018 23:03:24 +0000 (15:03 -0800)]
MAINTAINERS: Add Sasha as a stable branch maintainer
Sasha has somehow been convinced into helping me with the stable kernel
maintenance. Codify this slip in good judgement before he realizes what
he really signed up for :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Tue, 20 Nov 2018 15:37:15 +0000 (07:37 -0800)]
Merge tag 'media/v4.20-3' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- add a missing include at v4l2-controls uAPI header
- minor kAPI update for the request API
- some fixes at CEC core
- use a lower minimum height for the virtual codec driver
- cleanup a gcc warning due to the lack of a fall though markup
- tc358743: Remove unnecessary self assignment
- fix the V4L event subscription logic
- docs: Document metadata format in struct v4l2_format
- omap3isp and ipu3-cio2: fix unbinding logic
* tag 'media/v4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: ipu3-cio2: Use cio2_queues_exit
media: ipu3-cio2: Unregister device nodes first, then release resources
media: omap3isp: Unregister media device as first
media: docs: Document metadata format in struct v4l2_format
media: v4l: event: Add subscription to list before calling "add" operation
media: dm365_ipipeif: better annotate a fall though
media: Rename vb2_m2m_request_queue -> v4l2_m2m_request_queue
media: cec: increase debug level for 'queue full'
media: cec: check for non-OK/NACK conditions while claiming a LA
media: vicodec: lower minimum height to 360
media: tc358743: Remove unnecessary self assignment
media: v4l: fix uapi mpeg slice params definition
v4l2-controls: add a missing include
Tudor.Ambarus@microchip.com [Fri, 16 Nov 2018 17:46:37 +0000 (17:46 +0000)]
mtd: spi-nor: fix selection of uniform erase type in flexible conf
There are uniform, non-uniform and flexible erase flash configurations.
The non-uniform erase types, are the erase types that can _not_ erase
the entire flash by their own.
As the code was, in case flashes had flexible erase capabilities
(support both uniform and non-uniform erase types in the same flash
configuration) and supported multiple uniform erase type sizes, the
code did not sort the uniform erase types, and could select a wrong
erase type size.
Sort the uniform erase mask in case of flexible erase flash
configurations, in order to select the best uniform erase type size.
Uniform, non-uniform, and flexible configurations with just a valid
uniform erase type, are not affected by this change.
Uniform erase tested on mx25l3273fm2i-08g and sst26vf064B-104i/sn.
Non uniform erase tested on sst26vf064B-104i/sn.
Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Patrick Stählin [Fri, 9 Nov 2018 21:42:16 +0000 (22:42 +0100)]
RISC-V: recognize S/U mode bits in print_isa
Removes the warning about an unsupported ISA when reading /proc/cpuinfo
on QEMU. The "S" extension is not being returned as it is not accessible
from userspace.
Signed-off-by: Patrick Stählin <me@packi.ch>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
David Abdurachmanov [Thu, 8 Nov 2018 19:02:39 +0000 (20:02 +0100)]
riscv: add asm/unistd.h UAPI header
Marcin Juszkiewicz reported issues while generating syscall table for riscv
using 4.20-rc1. The patch refactors our unistd.h files to match some other
architectures.
- Add asm/unistd.h UAPI header, which has __ARCH_WANT_NEW_STAT only for 64-bit
- Remove asm/syscalls.h UAPI header and merge to asm/unistd.h
- Adjust kernel asm/unistd.h
So now asm/unistd.h UAPI header should show all syscalls for riscv.
Before this, Makefile simply put `#include <asm-generic/unistd.h>` into
generated asm/unistd.h UAPI header thus user didn't see:
- __NR_riscv_flush_icache
- __NR_newfstatat
- __NR_fstat
which are supported by riscv kernel.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Fixes: 67314ec7b025 ("RISC-V: Request newstat syscalls")
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
David Abdurachmanov [Thu, 8 Nov 2018 19:07:00 +0000 (20:07 +0100)]
riscv: fix warning in arch/riscv/include/asm/module.h
Fixes warning: 'struct module' declared inside parameter list will not be
visible outside of this definition or declaration
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Anup Patel [Mon, 12 Nov 2018 05:55:15 +0000 (11:25 +0530)]
RISC-V: Build flat and compressed kernel images
This patch extends Linux RISC-V build system to build and install:
Image - Flat uncompressed kernel image
Image.gz - Flat and GZip compressed kernel image
Quiet a few bootloaders (such as Uboot, UEFI, etc) are capable of
booting flat and compressed kernel images. In case of Uboot, booting
Image or Image.gz is achieved using bootm command.
The flat and uncompressed kernel image (i.e. Image) is very useful
in pre-silicon developent and testing because we can create back-door
HEX files for RAM on FPGAs from Image.
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Olof Johansson [Thu, 15 Nov 2018 00:27:55 +0000 (16:27 -0800)]
RISC-V: Fix raw_copy_{to,from}_user()
Sparse highlighted it, and appears to be a pure bug (from vs to).
./arch/riscv/include/asm/uaccess.h:403:35: warning: incorrect type in argument 1 (different address spaces)
./arch/riscv/include/asm/uaccess.h:403:39: warning: incorrect type in argument 2 (different address spaces)
./arch/riscv/include/asm/uaccess.h:409:37: warning: incorrect type in argument 1 (different address spaces)
./arch/riscv/include/asm/uaccess.h:409:41: warning: incorrect type in argument 2 (different address spaces)
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Maarten Jacobs [Mon, 19 Nov 2018 23:18:49 +0000 (23:18 +0000)]
usb: cdc-acm: add entry for Hiro (Conexant) modem
The cdc-acm kernel module currently does not support the Hiro (Conexant)
H05228 USB modem. The patch below adds the device specific information:
idVendor 0x0572
idProduct 0x1349
Signed-off-by: Maarten Jacobs <maarten256@outlook.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Wilson [Fri, 2 Nov 2018 16:12:12 +0000 (16:12 +0000)]
drm/i915: Prevent machine hang from Broxton's vtd w/a and error capture
Since capturing the error state requires fiddling around with the GGTT
to read arbitrary buffers and is itself run under stop_machine(), it
deadlocks the machine (effectively a hard hang) when run in conjunction
with Broxton's VTd workaround to serialize GGTT access.
v2: Store the ERR_PTR in first_error so that the error can be reported
to the user via sysfs.
v3: Mention the quirk in dmesg (using info as per usual)
Fixes: 0ef34ad6222a ("drm/i915: Serialize GTT/Aperture accesses on BXT")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: John Harrison <john.C.Harrison@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-5-chris@chris-wilson.co.uk
(cherry picked from commit
fb6f0b64e455b207a636346588e65bf9598d30eb)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
David S. Miller [Tue, 20 Nov 2018 03:04:33 +0000 (19:04 -0800)]
Merge tag 'mlx5-fixes-2018-11-19' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2018-11-19
The following fixes are for mlx5 core and netdev driver.
For -stable v4.16
bc7fda7d4637 ('net/mlx5e: IPoIB, Reset QP after channels are closed')
For -stable v4.17
36917a270395 ('net/mlx5: IPSec, Fix the SA context hash key')
For -stable v4.18
6492a432be3a ('net/mlx5e: Always use the match level enum when parsing TC rule match')
c3f81be236b1 ('net/mlx5e: Removed unnecessary warnings in FEC caps query')
c5ce2e736b64 ('net/mlx5e: Fix selftest for small MTUs')
For -stable v4.19
effcd896b25e ('net/mlx5e: Adjust to max number of channles when re-attaching')
394cbc5acd68 ('net/mlx5e: RX, verify received packet size in Linear Striding RQ')
447cbb3613c8 ('net/mlx5e: Don't match on vlan non-existence if ethertype is wildcarded')
c223c1574612 ('net/mlx5e: Claim TC hw offloads support only under a proper build config')
Please pull and let me know if there's any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / platform / kernel / linux-starfive.git / log