x86/topology: Fix duplicated core ID within a package

commit 71eac7063698b7d7b8fafb1683ac24a034541141 upstream.

Today, core ID is assumed to be unique within each package.

But an AlderLake-N platform adds a Module level between core and package,
Linux excludes the unknown modules bits from the core ID, resulting in
duplicate core ID's.

To keep core ID unique within a package, Linux must include all APIC-ID
bits for known or unknown levels above the core and below the package
in the core ID.

It is important to understand that core ID's have always come directly
from the APIC-ID encoding, which comes from the BIOS. Thus there is no
guarantee that they start at 0, or that they are contiguous.
As such, naively using them for array indexes can be problematic.

[ dhansen: un-known -> unknown ]

Fixes: 7745f03eb395 ("x86/topology: Add CPUID.1F multi-die/package support")
Suggested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20221014090147.1836-5-rui.zhang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/topology: Fix multiple packages shown on a single-package system

commit 2b12a7a126d62bdbd81f4923c21bf6e9a7fbd069 upstream.

CPUID.1F/B does not enumerate Package level explicitly, instead, all the
APIC-ID bits above the enumerated levels are assumed to be package ID
bits.

Current code gets package ID by shifting out all the APIC-ID bits that
Linux supports, rather than shifting out all the APIC-ID bits that
CPUID.1F enumerates. This introduces problems when CPUID.1F enumerates a
level that Linux does not support.

For example, on a single package AlderLake-N, there are 2 Ecore Modules
with 4 atom cores in each module.  Linux does not support the Module
level and interprets the Module ID bits as package ID and erroneously
reports a multi module system as a multi-package system.

Fix this by using APIC-ID bits above all the CPUID.1F enumerated levels
as package ID.

[ dhansen: spelling fix ]

Fixes: 7745f03eb395 ("x86/topology: Add CPUID.1F multi-die/package support")
Suggested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20221014090147.1836-4-rui.zhang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: venus: dec: Handle the case where find_format fails

commit 06a2da340f762addc5935bf851d95b14d4692db2 upstream.

Debugging the decoder on msm8916 I noticed the vdec probe was crashing if
the fmt pointer was NULL.

A similar fix from Colin Ian King found by Coverity was implemented for the
encoder. Implement the same fix on the decoder.

Fixes: 7472c1c69138 ("[media] media: venus: vdec: add video decoder files")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: mceusb: set timeout to at least timeout provided

commit 20b794ddce475ed012deb365000527c17b3e93e6 upstream.

By rounding down, the actual timeout can be lower than requested. As a
result, long spaces just below the requested timeout can be incorrectly
reported as timeout and truncated.

Fixes: 877f1a7cee3f ("media: rc: mceusb: allow the timeout to be configurable")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ipu3-imgu: Fix NULL pointer dereference in active selection access

commit b9eb3ab6f30bf32f7326909f17949ccb11bab514 upstream.

What the IMGU driver did was that it first acquired the pointers to active
and try V4L2 subdev state, and only then figured out which one to use.

The problem with that approach and a later patch (see Fixes: tag) is that
as sd_state argument to v4l2_subdev_get_try_crop() et al is NULL, there is
now an attempt to dereference that.

Fix this.

Also rewrap lines a little.

Fixes: 0d346d2a6f54 ("media: v4l2-subdev: add subdev-wide state struct")
Cc: stable@vger.kernel.org # for v5.14 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: vgic: Fix exit condition in scan_its_table()

commit c000a2607145d28b06c697f968491372ea56c23a upstream.

With some PCIe topologies, restoring a guest fails while
parsing the ITS device tables.

Reproducer hints:
1. Create ARM virt VM with pxb-pcie bus which adds
   extra host bridges, with qemu command like:

```
  -device pxb-pcie,bus_nr=8,id=pci.x,numa_node=0,bus=pcie.0 \
  -device pcie-root-port,..,bus=pci.x \
  ...
  -device pxb-pcie,bus_nr=37,id=pci.y,numa_node=1,bus=pcie.0 \
  -device pcie-root-port,..,bus=pci.y \
  ...

```
2. Ensure the guest uses 2-level device table
3. Perform VM migration which calls save/restore device tables

In that setup, we get a big "offset" between 2 device_ids,
which makes unsigned "len" round up a big positive number,
causing the scan loop to continue with a bad GPA. For example:

1. L1 table has 2 entries;
2. and we are now scanning at L2 table entry index 2075 (pointed
   to by L1 first entry)
3. if next device id is 9472, we will get a big offset: 7397;
4. with unsigned 'len', 'len -= offset * esz', len will underflow to a
   positive number, mistakenly into next iteration with a bad GPA;
   (It should break out of the current L2 table scanning, and jump
   into the next L1 table entry)
5. that bad GPA fails the guest read.

Fix it by stopping the L2 table scan when the next device id is
outside of the current table, allowing the scan to continue from
the next L1 table entry.

Thanks to Eric Auger for the fix suggestion.

Fixes: 920a7a8fa92a ("KVM: arm64: vgic-its: Add infrastructure for tableookup")
Suggested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Eric Ren <renzhengeek@gmail.com>
[maz: commit message tidy-up]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/d9c3a564af9e2c5bf63f48a7dcbf08cd593c5c0b.1665802985.git.renzhengeek@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: Add support for arch compat vm ioctls

commit ed51862f2f57cbce6fed2d4278cfe70a490899fd upstream.

We will introduce the first architecture specific compat vm ioctl in the
next patch. Add all necessary boilerplate to allow architectures to
override compat vm ioctls when necessary.

Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-2-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm,hugetlb: take hugetlb_lock before decrementing h->resv_huge_pages

commit 12df140f0bdfae5dcfc81800970dd7f6f632e00c upstream.

The h->*_huge_pages counters are protected by the hugetlb_lock, but
alloc_huge_page has a corner case where it can decrement the counter
outside of the lock.

This could lead to a corrupted value of h->resv_huge_pages, which we have
observed on our systems.

Take the hugetlb_lock before decrementing h->resv_huge_pages to avoid a
potential race.

Link: https://lkml.kernel.org/r/20221017202505.0e6a4fcd@imladris.surriel.com
Fixes: a88c76954804 ("mm: hugetlb: fix hugepage memory leak caused by wrong reserve count")
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Glen McCready <gkmccready@meta.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix sdma doorbell init ordering on APUs

commit 50b0e4d4da09fa501e722af886f97e60a4f820d6 upstream.

Commit 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
uncovered a bug in amdgpu that required a reordering of the driver
init sequence to avoid accessing a special register on the GPU
before it was properly set up leading to an PCI AER error.  This
reordering uncovered a different hw programming ordering dependency
in some APUs where the SDMA doorbells need to be programmed before
the GFX doorbells. To fix this, move the SDMA doorbell programming
back into the soc15 common code, but use the actual doorbell range
values directly rather than the values stored in the ring structure
since those will not be initialized at this point.

This is a partial revert, but with the doorbell assignment
fixed so the proper doorbell index is set before it's used.

Fixes: e3163bc8ffdfdb ("drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: skhan@linuxfoundation.org
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: qcom: fix memory leak in error path

commit 9f42cf54403a42cb092636804d2628d8ecf71e75 upstream.

If for some reason the speedbin length is incorrect, then there is a
memory leak in the error path because we never free the speedbin buffer.
This commit fixes the error path to always free the speedbin buffer.

Cc: v5.7+ <stable@vger.kernel.org> # v5.7+
Fixes: a8811ec764f9 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/resctrl: Fix min_cbm_bits for AMD

commit 67bf6493449b09590f9f71d7df29efb392b12d25 upstream.

AMD systems support zero CBM (capacity bit mask) for cache allocation.
That is reflected in rdt_init_res_defs_amd() by:

  r->cache.arch_has_empty_bitmaps = true;

However given the unified code in cbm_validate(), checking for:

  val == 0 && !arch_has_empty_bitmaps

is not enough because of another check in cbm_validate():

  if ((zero_bit - first_bit) < r->cache.min_cbm_bits)

The default value of r->cache.min_cbm_bits = 1.

Leading to:

  $ cd /sys/fs/resctrl
  $ mkdir foo
  $ cd foo
  $ echo L3:0=0 > schemata
    -bash: echo: write error: Invalid argument
  $ cat /sys/fs/resctrl/info/last_cmd_status
    Need at least 1 bits in the mask

Initialize the min_cbm_bits to 0 for AMD. Also, remove the default
setting of min_cbm_bits and initialize it separately.

After the fix:

  $ cd /sys/fs/resctrl
  $ mkdir foo
  $ cd foo
  $ echo L3:0=0 > schemata
  $ cat /sys/fs/resctrl/info/last_cmd_status
    ok

Fixes: 316e7f901f5a ("x86/resctrl: Add struct rdt_cache::arch_has_{sparse, empty}_bitmaps")
Co-developed-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/lkml/20220517001234.3137157-1-eranian@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: ahci: Match EM_MAX_SLOTS with SATA_PMP_MAX_PORTS

commit 1e41e693f458eef2d5728207dbd327cd3b16580a upstream.

UBSAN complains about array-index-out-of-bounds:
[ 1.980703] kernel: UBSAN: array-index-out-of-bounds in /build/linux-9H675w/linux-5.15.0/drivers/ata/libahci.c:968:41
[ 1.980709] kernel: index 15 is out of range for type 'ahci_em_priv [8]'
[ 1.980713] kernel: CPU: 0 PID: 209 Comm: scsi_eh_8 Not tainted 5.15.0-25-generic #25-Ubuntu
[ 1.980716] kernel: Hardware name: System manufacturer System Product Name/P5Q3, BIOS 1102 06/11/2010
[ 1.980718] kernel: Call Trace:
[ 1.980721] kernel: <TASK>
[ 1.980723] kernel: show_stack+0x52/0x58
[ 1.980729] kernel: dump_stack_lvl+0x4a/0x5f
[ 1.980734] kernel: dump_stack+0x10/0x12
[ 1.980736] kernel: ubsan_epilogue+0x9/0x45
[ 1.980739] kernel: __ubsan_handle_out_of_bounds.cold+0x44/0x49
[ 1.980742] kernel: ahci_qc_issue+0x166/0x170 [libahci]
[ 1.980748] kernel: ata_qc_issue+0x135/0x240
[ 1.980752] kernel: ata_exec_internal_sg+0x2c4/0x580
[ 1.980754] kernel: ? vprintk_default+0x1d/0x20
[ 1.980759] kernel: ata_exec_internal+0x67/0xa0
[ 1.980762] kernel: sata_pmp_read+0x8d/0xc0
[ 1.980765] kernel: sata_pmp_read_gscr+0x3c/0x90
[ 1.980768] kernel: sata_pmp_attach+0x8b/0x310
[ 1.980771] kernel: ata_eh_revalidate_and_attach+0x28c/0x4b0
[ 1.980775] kernel: ata_eh_recover+0x6b6/0xb30
[ 1.980778] kernel: ? ahci_do_hardreset+0x180/0x180 [libahci]
[ 1.980783] kernel: ? ahci_stop_engine+0xb0/0xb0 [libahci]
[ 1.980787] kernel: ? ahci_do_softreset+0x290/0x290 [libahci]
[ 1.980792] kernel: ? trace_event_raw_event_ata_eh_link_autopsy_qc+0xe0/0xe0
[ 1.980795] kernel: sata_pmp_eh_recover.isra.0+0x214/0x560
[ 1.980799] kernel: sata_pmp_error_handler+0x23/0x40
[ 1.980802] kernel: ahci_error_handler+0x43/0x80 [libahci]
[ 1.980806] kernel: ata_scsi_port_error_handler+0x2b1/0x600
[ 1.980810] kernel: ata_scsi_error+0x9c/0xd0
[ 1.980813] kernel: scsi_error_handler+0xa1/0x180
[ 1.980817] kernel: ? scsi_unjam_host+0x1c0/0x1c0
[ 1.980820] kernel: kthread+0x12a/0x150
[ 1.980823] kernel: ? set_kthread_struct+0x50/0x50
[ 1.980826] kernel: ret_from_fork+0x22/0x30
[ 1.980831] kernel: </TASK>

This happens because sata_pmp_init_links() initialize link->pmp up to
SATA_PMP_MAX_PORTS while em_priv is declared as 8 elements array.

I can't find the maximum Enclosure Management ports specified in AHCI
spec v1.3.1, but "12.2.1 LED message type" states that "Port Multiplier
Information" can utilize 4 bits, which implies it can support up to 16
ports. Hence, use SATA_PMP_MAX_PORTS as EM_MAX_SLOTS to resolve the
issue.

BugLink: https://bugs.launchpad.net/bugs/1970074
Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: ahci-imx: Fix MODULE_ALIAS

commit 979556f1521a835a059de3b117b9c6c6642c7d58 upstream.

'ahci:' is an invalid prefix, preventing the module from autoloading.
Fix this by using the 'platform:' prefix and DRV_NAME.

Fixes: 9e54eae23bc9 ("ahci_imx: add ahci sata support on imx platforms")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon/coretemp: Handle large core ID value

commit 7108b80a542b9d65e44b36d64a700a83658c0b73 upstream.

The coretemp driver supports up to a hard-coded limit of 128 cores.

Today, the driver can not support a core with an ID above that limit.
Yet, the encoding of core ID's is arbitrary (BIOS APIC-ID) and so they
may be sparse and they may be large.

Update the driver to map arbitrary core ID numbers into appropriate
array indexes so that 128 cores can be supported, no matter the encoding
of core ID's.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Len Brown <len.brown@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20221014090147.1836-3-rui.zhang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/microcode/AMD: Apply the patch early on every logical thread

commit e7ad18d1169c62e6c78c01ff693fd362d9d65278 upstream.

Currently, the patch application logic checks whether the revision
needs to be applied on each logical CPU (SMT thread). Therefore, on SMT
designs where the microcode engine is shared between the two threads,
the application happens only on one of them as that is enough to update
the shared microcode engine.

However, there are microcode patches which do per-thread modification,
see Link tag below.

Therefore, drop the revision check and try applying on each thread. This
is what the BIOS does too so this method is very much tested.

Btw, change only the early paths. On the late loading paths, there's no
point in doing per-thread modification because if is it some case like
in the bugzilla below - removing a CPUID flag - the kernel cannot go and
un-use features it has detected are there early. For that, one should
use early loading anyway.

  [ bp: Fixes does not contain the oldest commit which did check for
    equality but that is good enough. ]

Fixes: 8801b3fcb574 ("x86/microcode/AMD: Rework container parsing")
Reported-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216211
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter

commit 61775d54d674ff8ec3658495e0dbc537227dc5c1 upstream.

When we compile-in the CCI along with the imx412 driver and run on the RB5
we see that i2c_add_adapter() causes the probe of the imx412 driver to
happen.

This probe tries to perform an i2c xfer() and the xfer() in i2c-qcom-cci.c
fails on pm_runtime_get() because the i2c-qcom-cci.c::probe() function has
not completed to pm_runtime_enable(dev).

Fix this sequence by ensuring pm_runtime_xxx() calls happen prior to adding
the i2c adapter.

Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver")
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: qcom: fix writes in read-only memory region

commit 01039fb8e90c9cb684430414bff70cea9eb168c5 upstream.

This commit fixes a kernel oops because of a write in some read-only memory:

[    9.068287] Unable to handle kernel write to read-only memory at virtual address ffff800009240ad8
..snip..
[    9.138790] Internal error: Oops: 9600004f [#1] PREEMPT SMP
..snip..
[    9.269161] Call trace:
[    9.276271]  __memcpy+0x5c/0x230
[    9.278531]  snprintf+0x58/0x80
[    9.282002]  qcom_cpufreq_msm8939_name_version+0xb4/0x190
[    9.284869]  qcom_cpufreq_probe+0xc8/0x39c
..snip..

The following line defines a pointer that point to a char buffer stored
in read-only memory:

char *pvs_name = "speedXX-pvsXX-vXX";

This pointer is meant to hold a template "speedXX-pvsXX-vXX" where the
XX values get overridden by the qcom_cpufreq_krait_name_version function. Since
the template is actually stored in read-only memory, when the function
executes the following call we get an oops:

snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d",
 speed, pvs, pvs_ver);

To fix this issue, we instead store the template name onto the stack by
using the following syntax:

char pvs_name_buffer[] = "speedXX-pvsXX-vXX";

Because the `pvs_name` needs to be able to be assigned to NULL, the
template buffer is stored in the pvs_name_buffer and not under the
pvs_name variable.

Cc: v5.7+ <stable@vger.kernel.org> # v5.7+
Fixes: a8811ec764f9 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: enable use of both GFP_KERNEL and GFP_ATOMIC in convert_context()

commit abe3c631447dcd1ba7af972fe6f054bee6f136fa upstream.

The following warning was triggered on a hardware environment:

  SELinux: Converting 162 SID table entries...
  BUG: sleeping function called from invalid context at
       __might_sleep+0x60/0x74 0x0
  in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 5943, name: tar
  CPU: 7 PID: 5943 Comm: tar Tainted: P O 5.10.0 #1
  Call trace:
   dump_backtrace+0x0/0x1c8
   show_stack+0x18/0x28
   dump_stack+0xe8/0x15c
   ___might_sleep+0x168/0x17c
   __might_sleep+0x60/0x74
   __kmalloc_track_caller+0xa0/0x7dc
   kstrdup+0x54/0xac
   convert_context+0x48/0x2e4
   sidtab_context_to_sid+0x1c4/0x36c
   security_context_to_sid_core+0x168/0x238
   security_context_to_sid_default+0x14/0x24
   inode_doinit_use_xattr+0x164/0x1e4
   inode_doinit_with_dentry+0x1c0/0x488
   selinux_d_instantiate+0x20/0x34
   security_d_instantiate+0x70/0xbc
   d_splice_alias+0x4c/0x3c0
   ext4_lookup+0x1d8/0x200 [ext4]
   __lookup_slow+0x12c/0x1e4
   walk_component+0x100/0x200
   path_lookupat+0x88/0x118
   filename_lookup+0x98/0x130
   user_path_at_empty+0x48/0x60
   vfs_statx+0x84/0x140
   vfs_fstatat+0x20/0x30
   __se_sys_newfstatat+0x30/0x74
   __arm64_sys_newfstatat+0x1c/0x2c
   el0_svc_common.constprop.0+0x100/0x184
   do_el0_svc+0x1c/0x2c
   el0_svc+0x20/0x34
   el0_sync_handler+0x80/0x17c
   el0_sync+0x13c/0x140
  SELinux: Context system_u:object_r:pssp_rsyslog_log_t:s0:c0 is
           not valid (left unmapped).

It was found that within a critical section of spin_lock_irqsave in
sidtab_context_to_sid(), convert_context() (hooked by
sidtab_convert_params.func) might cause the process to sleep via
allocating memory with GFP_KERNEL, which is problematic.

As Ondrej pointed out [1], convert_context()/sidtab_convert_params.func
has another caller sidtab_convert_tree(), which is okay with GFP_KERNEL.
Therefore, fix this problem by adding a gfp_t argument for
convert_context()/sidtab_convert_params.func and pass GFP_KERNEL/_ATOMIC
properly in individual callers.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20221018120111.1474581-1-gongruiqi1@huawei.com/
Reported-by: Tan Ninghao <tanninghao1@huawei.com>
Fixes: ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve performance")
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: wrap long BUG() output lines, tweak subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix BUG when iput after ocfs2_mknod fails

commit 759a7c6126eef5635506453e9b9d55a6a3ac2084 upstream.

Commit b1529a41f777 "ocfs2: should reclaim the inode if
'__ocfs2_mknod_locked' returns an error" tried to reclaim the claimed
inode if __ocfs2_mknod_locked() fails later.  But this introduce a race,
the freed bit may be reused immediately by another thread, which will
update dinode, e.g.  i_generation.  Then iput this inode will lead to BUG:
inode->i_generation != le32_to_cpu(fe->i_generation)

We could make this inode as bad, but we did want to do operations like
wipe in some cases.  Since the claimed inode bit can only affect that an
dinode is missing and will return back after fsck, it seems not a big
problem.  So just leave it as is by revert the reclaim logic.

Link: https://lkml.kernel.org/r/20221017130227.234480-1-joseph.qi@linux.alibaba.com
Fixes: b1529a41f777 ("ocfs2: should reclaim the inode if '__ocfs2_mknod_locked' returns an error")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Yan Wang <wangyan122@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: clear dinode links count in case of error

commit 28f4821b1b53e0649706912e810c6c232fc506f9 upstream.

In ocfs2_mknod(), if error occurs after dinode successfully allocated,
ocfs2 i_links_count will not be 0.

So even though we clear inode i_nlink before iput in error handling, it
still won't wipe inode since we'll refresh inode from dinode during inode
lock.  So just like clear inode i_nlink, we clear ocfs2 i_links_count as
well.  Also do the same change for ocfs2_symlink().

Link: https://lkml.kernel.org/r/20221017130227.234480-2-joseph.qi@linux.alibaba.com
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Yan Wang <wangyan122@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: enhance unsupported compat RO flags handling

commit 81d5d61454c365718655cfc87d8200c84e25d596 upstream.

Currently there are two corner cases not handling compat RO flags
correctly:

- Remount
  We can still mount the fs RO with compat RO flags, then remount it RW.
  We should not allow any write into a fs with unsupported RO flags.

- Still try to search block group items
  In fact, behavior/on-disk format change to extent tree should not
  need a full incompat flag.

  And since we can ensure fs with unsupported RO flags never got any
  writes (with above case fixed), then we can even skip block group
  items search at mount time.

This patch will enhance the unsupported RO compat flags by:

- Reject read-write remount if there are unsupported RO compat flags

- Go dummy block group items directly for unsupported RO compat flags
  In fact, only changes to chunk/subvolume/root/csum trees should go
  incompat flags.

The latter part should allow future change to extent tree to be compat
RO flags.

Thus this patch also needs to be backported to all stable trees.

CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel/pt: Relax address filter validation

commit c243cecb58e3905baeace8827201c14df8481e2a upstream.

The requirement for 64-bit address filters is that they are canonical
addresses. In other respects any address range is allowed which would
include user space addresses.

That can be useful for tracing virtual machine guests because address
filtering can be used to advantage in place of current privilege level
(CPL) filtering.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220131072453.2839535-2-adrian.hunter@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: errata: Remove AES hwcap for COMPAT tasks

commit 44b3834b2eed595af07021b1c64e6f9bc396398b upstream.

Cortex-A57 and Cortex-A72 have an erratum where an interrupt that
occurs between a pair of AES instructions in aarch32 mode may corrupt
the ELR. The task will subsequently produce the wrong AES result.

The AES instructions are part of the cryptographic extensions, which are
optional. User-space software will detect the support for these
instructions from the hwcaps. If the platform doesn't support these
instructions a software implementation should be used.

Remove the hwcap bits on affected parts to indicate user-space should
not use the AES instructions.

Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220714161523.279570-3-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[florian: resolved conflicts in arch/arm64/tools/cpucaps and cpu_errata.c]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: uvc: improve sg exit condition

commit aef11279888c00e1841a3533a35d279285af3a51 upstream.

The exit condition to quit iterating over the sg_list, while encoding
the sg entries, has to consider the case that the dma_len of the entry
could be zero. This patch takes this condition to account.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220402232744.3622565-4-m.grzeschik@pengutronix.de
Cc: Dan Vacura <w36195@motorola.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: uvc: giveback vb2 buffer on req complete

commit 9b969f93bcef9b3d9e92f1810e22bbd6c344a0e5 upstream.

On uvc_video_encode_isoc_sg the mapped vb2 buffer is returned
to early. Only after the last usb_request worked with the buffer
it is allowed to give it back to vb2. This patch fixes that.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220402232744.3622565-3-m.grzeschik@pengutronix.de
Cc: Dan Vacura <w36195@motorola.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: uvc: rework uvcg_queue_next_buffer to uvcg_complete_buffer

commit 61aa709ca58a0dbeeb817bfa9230c1a92979f2c6 upstream.

The function uvcg_queue_next_buffer is used different than its name
suggests. The return value nextbuf is never used by any caller. This
patch reworks the function to its actual purpose, by removing the unused
code and renaming it. The function name uvcg_complete_buffer makes it
more clear that it is actually marking the current video buffer as
complete.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220402232744.3622565-2-m.grzeschik@pengutronix.de
Cc: Dan Vacura <w36195@motorola.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: uvc: use on returned header len in video_encode_isoc_sg

commit f262ce66d40cc6858d1fcb11e7b7f960448a4f38 upstream.

The function uvc_video_encode_header function returns the number of
bytes used for the header. We change the video_encode_isoc_sg function
to use the returned header_len rather than UVCG_REQUEST_HEADER_LEN and
make the encode function more flexible.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20211022093223.26493-1-m.grzeschik@pengutronix.de
Cc: Dan Vacura <w36195@motorola.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: uvc: consistently use define for headerlen

commit 859c675d84d488e2f9b515c713ea890c9f045f0c upstream.

The uvc request headerlen of 2 was defined as UVCG_REQUEST_HEADER_LEN
in commit e81e7f9a0eb9 ("usb: gadget: uvc: add scatter gather support").
We missed to use it consistently. This patch fixes that.

Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20211018072059.11465-1-m.grzeschik@pengutronix.de
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Dan Vacura <w36195@motorola.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/mm: Consolidate TCR_EL1 fields

commit e921da6bc7cac5f0e8458fe5df18ae08eb538f54 upstream.

This renames and moves SYS_TCR_EL1_TCMA1 and SYS_TCR_EL1_TCMA0 definitions
into pgtable-hwdef.h thus consolidating all TCR fields in a single header.
This does not cause any functional change.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1643121513-21854-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Cc: Evgenii Stepanov <eugenis@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8152: add PID for the Lenovo OneLink+ Dock

commit 1bd3a383075c64d638e65d263c9267b08ee7733c upstream.

The Lenovo OneLink+ Dock contains an RTL8153 controller that behaves as
a broken CDC device by default. Add the custom Lenovo PID to the r8152
driver to support it properly.

Also, systems compatible with this dock provide a BIOS option to enable
MAC address passthrough (as per Lenovo document "ThinkPad Docking
Solutions 2017"). Add the custom PID to the MAC passthrough list too.

Tested on a ThinkPad 13 1st gen with the expected results:

passthrough disabled: Invalid header when reading pass-thru MAC addr
passthrough enabled:  Using pass-thru MAC addr XX:XX:XX:XX:XX:XX

Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.75

Link: https://lore.kernel.org/r/20221024113044.976326639@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Slade Watkins <srw@sladewatkins.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io-wq: Fix memory leak in worker creation

commit 996d3efeb091c503afd3ee6b5e20eabf446fd955 upstream.

If the CPU mask allocation for a node fails, then the memory allocated for
the 'io_wqe' struct of the current node doesn't get freed on the error
handling path, since it has not yet been added to the 'wqes' array.

This was spotted when fuzzing v6.1-rc1 with Syzkaller:
BUG: memory leak
unreferenced object 0xffff8880093d5000 (size 1024):
  comm "syz-executor.2", pid 7701, jiffies 4295048595 (age 13.900s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000cb463369>] __kmem_cache_alloc_node+0x18e/0x720
    [<00000000147a3f9c>] kmalloc_node_trace+0x2a/0x130
    [<000000004e107011>] io_wq_create+0x7b9/0xdc0
    [<00000000c38b2018>] io_uring_alloc_task_context+0x31e/0x59d
    [<00000000867399da>] __io_uring_add_tctx_node.cold+0x19/0x1ba
    [<000000007e0e7a79>] io_uring_setup.cold+0x1b80/0x1dce
    [<00000000b545e9f6>] __x64_sys_io_uring_setup+0x5d/0x80
    [<000000008a8a7508>] do_syscall_64+0x5d/0x90
    [<000000004ac08bec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 0e03496d1967 ("io-wq: use private CPU mask")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20221020014710.902201-1-rafaelmendsr@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcov: support GCC 12.1 and newer compilers

commit 977ef30a7d888eeb52fb6908f99080f33e5309a8 upstream.

Starting with GCC 12.1, the created .gcda format can't be read by gcov
tool.  There are 2 significant changes to the .gcda file format that
need to be supported:

a) [gcov: Use system IO buffering]
   (23eb66d1d46a34cb28c4acbdf8a1deb80a7c5a05) changed that all sizes in
   the format are in bytes and not in words (4B)

b) [gcov: make profile merging smarter]
   (72e0c742bd01f8e7e6dcca64042b9ad7e75979de) add a new checksum to the
   file header.

Tested with GCC 7.5, 10.4, 12.2 and the current master.

Link: https://lkml.kernel.org/r/624bda92-f307-30e9-9aaa-8cc678b2dfb2@suse.cz
Signed-off-by: Martin Liska <mliska@suse.cz>
Tested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: intel_powerclamp: Use first online CPU as control_cpu

commit 4bb7f6c2781e46fc5bd00475a66df2ea30ef330d upstream.

Commit 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead
of smp_processor_id() to avoid crash") fixed an issue related to using
smp_processor_id() in preemptible context by replacing it with a pair
of get_cpu()/put_cpu(), but what is needed there really is any online
CPU and not necessarily the one currently running the code.  Arguably,
getting the one that's running the code in there is confusing.

For this reason, simply give the control CPU role to the first online
one which automatically will be CPU0 if it is online, so one check
can be dropped from the code for an added benefit.

Link: https://lore.kernel.org/linux-pm/20221011113646.GA12080@duo.ucw.cz/
Fixes: 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: continue to expand file system when the target size doesn't reach

commit df3cb754d13d2cd5490db9b8d536311f8413a92e upstream.

When expanding a file system from (16TiB-2MiB) to 18TiB, the operation
exits early which leads to result inconsistency between resize2fs and
Ext4 kernel driver.

=== before ===
○ → resize2fs /dev/mapper/thin
resize2fs 1.45.5 (07-Jan-2020)
Filesystem at /dev/mapper/thin is mounted on /mnt/test; on-line resizing required
old_desc_blocks = 2048, new_desc_blocks = 2304
The filesystem on /dev/mapper/thin is now 4831837696 (4k) blocks long.

[  865.186308] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[  912.091502] dm-4: detected capacity change from 34359738368 to 38654705664
[  970.030550] dm-5: detected capacity change from 34359734272 to 38654701568
[ 1000.012751] EXT4-fs (dm-5): resizing filesystem from 4294966784 to 4831837696 blocks
[ 1000.012878] EXT4-fs (dm-5): resized filesystem to 4294967296

=== after ===
[  129.104898] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[  143.773630] dm-4: detected capacity change from 34359738368 to 38654705664
[  198.203246] dm-5: detected capacity change from 34359734272 to 38654701568
[  207.918603] EXT4-fs (dm-5): resizing filesystem from 4294966784 to 4831837696 blocks
[  207.918754] EXT4-fs (dm-5): resizing filesystem from 4294967296 to 4831837696 blocks
[  207.918758] EXT4-fs (dm-5): Converting file system to meta_bg
[  207.918790] EXT4-fs (dm-5): resizing filesystem from 4294967296 to 4831837696 blocks
[  221.454050] EXT4-fs (dm-5): resized to 4658298880 blocks
[  227.634613] EXT4-fs (dm-5): resized filesystem to 4831837696

Signed-off-by: Jerry Lee <jerrylee@qnap.com>
Link: https://lore.kernel.org/r/PU1PR04MB22635E739BD21150DC182AC6A18C9@PU1PR04MB2263.apcprd04.prod.outlook.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5

commit 0a6de78cff600cb991f2a1b7ed376935871796a0 upstream.

When building with a RISC-V kernel with DWARF5 debug info using clang
and the GNU assembler, several instances of the following error appear:

  /tmp/vgettimeofday-48aa35.s:2963: Error: non-constant .uleb128 is not supported

Dumping the .s file reveals these .uleb128 directives come from
.debug_loc and .debug_ranges:

  .Ldebug_loc0:
          .byte   4                               # DW_LLE_offset_pair
          .uleb128 .Lfunc_begin0-.Lfunc_begin0    #   starting offset
          .uleb128 .Ltmp1-.Lfunc_begin0           #   ending offset
          .byte   1                               # Loc expr size
          .byte   90                              # DW_OP_reg10
          .byte   0                               # DW_LLE_end_of_list

  .Ldebug_ranges0:
          .byte   4                               # DW_RLE_offset_pair
          .uleb128 .Ltmp6-.Lfunc_begin0           #   starting offset
          .uleb128 .Ltmp27-.Lfunc_begin0          #   ending offset
          .byte   4                               # DW_RLE_offset_pair
          .uleb128 .Ltmp28-.Lfunc_begin0          #   starting offset
          .uleb128 .Ltmp30-.Lfunc_begin0          #   ending offset
          .byte   0                               # DW_RLE_end_of_list

There is an outstanding binutils issue to support a non-constant operand
to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to
be any movement on it, due to concerns over how it would work with
linker relaxation.

To avoid these build errors, prevent DWARF5 from being selected when
using clang and an assembler that does not have support for these symbol
deltas, which can be easily checked in Kconfig with as-instr plus the
small test program from the dwz test suite from the binutils issue.

Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27215
Link: https://github.com/ClangBuiltLinux/linux/issues/1719
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[nathan: Fix conflicts due to lack of f9b3cd24578401e]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT

commit bb1435f3f575b5213eaf27434efa3971f51c01de upstream.

CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT does not give explicit
-gdwarf-* flag. The actual DWARF version is up to the toolchain.

The combination of GCC and GAS works fine, and Clang with the integrated
assembler is good too.

The combination of Clang and GAS is tricky, but at least, the -g flag
works for Clang <=13, which defaults to DWARF v4.

Clang 14 switched its default to DWARF v5.

Now, CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT has the same issue as
addressed by commit 98cd6f521f10 ("Kconfig: allow explicit opt in to
DWARF v5").

CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y for Clang >= 14 and
GAS < 2.35 produces a ton of errors like follows:

  /tmp/main-c2741c.s: Assembler messages:
  /tmp/main-c2741c.s:109: Error: junk at end of line, first unrecognized character is `"'
  /tmp/main-c2741c.s:109: Error: file number less than one

Add 'depends on' to check toolchains.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
[nathan: Fix conflict due to lack of f9b3cd24578401e]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5

commit 4f001a21080ff2e2f0e1c3692f5e119aedbb3bc1 upstream.

Commit c0a5c81ca9be ("Kconfig.debug: drop GCC 5+ version check for
DWARF5") could have cleaned up the code a bit more.

"CC_IS_CLANG &&" is unneeded. No functional change is intended.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
[nathan: Only apply to DWARF5, as 5.15 does not have 32ef9e5054ec032]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Fix build breakage with CONFIG_DEBUG_FS=n

commit 2130b87b2273389cafe6765bf09ef564cda01407 upstream.

After commit 8799c0be89eb ("drm/amd/display: Fix vblank refcount in vrr
transition"), a build with CONFIG_DEBUG_FS=n is broken due to a
misplaced brace, along the lines of:

  In file included from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_trace.h:39,
                   from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:41:
  drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: At top level:
  ./include/drm/drm_atomic.h:864:9: error: expected identifier or ‘(’ before ‘for’
    864 |         for ((__i) = 0;                                                 \
        |         ^~~
  drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8317:9: note: in expansion of macro ‘for_each_new_crtc_in_state’
   8317 |         for_each_new_crtc_in_state(state, crtc, new_crtc_state, j)
        |         ^~~~~~~~~~~~~~~~~~~~~~~~~~

Move the brace within the #ifdef so that the file can be built with or
without CONFIG_DEBUG_FS.

Fixes: 8799c0be89eb ("drm/amd/display: Fix vblank refcount in vrr transition")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ieee802154: don't warn zero-sized raw_sendmsg()

[ Upstream commit b12e924a2f5b960373459c8f8a514f887adf5cac ]

syzbot is hitting skb_assert_len() warning at __dev_queue_xmit() [1],
for PF_IEEE802154 socket's zero-sized raw_sendmsg() request is hitting
__dev_queue_xmit() with skb->len == 0.

Since PF_IEEE802154 socket's zero-sized raw_sendmsg() request was
able to return 0, don't call __dev_queue_xmit() if packet length is 0.

  ----------
  #include <sys/socket.h>
  #include <netinet/in.h>

  int main(int argc, char *argv[])
  {
    struct sockaddr_in addr = { .sin_family = AF_INET, .sin_addr.s_addr = htonl(INADDR_LOOPBACK) };
    struct iovec iov = { };
    struct msghdr hdr = { .msg_name = &addr, .msg_namelen = sizeof(addr), .msg_iov = &iov, .msg_iovlen = 1 };
    sendmsg(socket(PF_IEEE802154, SOCK_RAW, 0), &hdr, 0);
    return 0;
  }
  ----------

Note that this might be a sign that commit fd1894224407c484 ("bpf: Don't
redirect packets with invalid pkt_len") should be reverted, for
skb->len == 0 was acceptable for at least PF_IEEE802154 socket.

Link: https://syzkaller.appspot.com/bug?extid=5ea725c25d06fb9114c4
Reported-by: syzbot <syzbot+5ea725c25d06fb9114c4@syzkaller.appspotmail.com>
Fixes: fd1894224407c484 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221005014750.3685555-2-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "net/ieee802154: reject zero-sized raw_sendmsg()"

[ Upstream commit 2eb2756f6c9e9621e022d78321ce40a62c4520b5 ]

This reverts commit 3a4d061c699bd3eedc80dc97a4b2a2e1af83c6f5.

There is a v2 which does return zero if zero length is given.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221005014750.3685555-1-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: ti: davinci_mdio: fix build for mdio bitbang uses

commit 35bbe652c421037822aba29423f5f1f7d0d69f3f upstream.

davinci_mdio.c uses mdio bitbang APIs, so it should select
MDIO_BITBANG to prevent build errors.

arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdio_remove':
drivers/net/ethernet/ti/davinci_mdio.c:649: undefined reference to `free_mdio_bitbang'
arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdio_probe':
drivers/net/ethernet/ti/davinci_mdio.c:545: undefined reference to `alloc_mdio_bitbang'
arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdiobb_read':
drivers/net/ethernet/ti/davinci_mdio.c:236: undefined reference to `mdiobb_read'
arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdiobb_write':
drivers/net/ethernet/ti/davinci_mdio.c:253: undefined reference to `mdiobb_write'

Fixes: d04807b80691 ("net: ethernet: ti: davinci_mdio: Add workaround for errata i2329")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ravi Gunasekaran <r-gunasekaran@ti.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20220824024216.4939-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-wbt: fix that 'rwb->wc' is always set to 1 in wbt_init()

commit 285febabac4a16655372d23ff43e89ff6f216691 upstream.

commit 8c5035dfbb94 ("blk-wbt: call rq_qos_add() after wb_normal is
initialized") moves wbt_set_write_cache() before rq_qos_add(), which
is wrong because wbt_rq_qos() is still NULL.

Fix the problem by removing wbt_set_write_cache() and setting 'rwb->wc'
directly. Noted that this patch also remove the redundant setting of
'rab->wc'.

Fixes: 8c5035dfbb94 ("blk-wbt: call rq_qos_add() after wb_normal is initialized")
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202210081045.77ddf59b-yujie.liu@intel.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221009101038.1692875-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix last interface check for registration

commit 39efc9c8a973ddff5918191525d1679d0fb368ea upstream.

The recent fix in commit 6392dcd1d0c7 ("ALSA: usb-audio: Register card
at the last interface") tried to delay the card registration until the
last found interface is probed.  It assumed that the probe callback
gets called for those later interfaces, but it's not always true; as
the driver loops over the descriptor and probes the matching ones,
it's not separately called via multiple probe calls.  This results in
the missing card registration, i.e. no sound device.

For addressing this problem, replace the check whether the last
interface is processed with usb_interface_claimed() instead of the
comparison with the probe interface number.

Fixes: 6392dcd1d0c7 ("ALSA: usb-audio: Register card at the last interface")
Link: https://lore.kernel.org/r/20220915085947.7922-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ieee802154: return -EINVAL for unknown addr type

commit 30393181fdbc1608cc683b4ee99dcce05ffcc8c7 upstream.

This patch adds handling to return -EINVAL for an unknown addr type. The
current behaviour is to return 0 as successful but the size of an
unknown addr type is not defined and should return an error like -EINVAL.

Fixes: 94160108a70c ("net/ieee802154: fix uninit value bug in dgram_sendmsg")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hugetlb: fix UAF in hugetlb_handle_userfault

commit 958f32ce832ba781ac20e11bb2d12a9352ea28fc upstream.

The vma_lock and hugetlb_fault_mutex are dropped before handling userfault
and reacquire them again after handle_userfault(), but reacquire the
vma_lock could lead to UAF[1,2] due to the following race,

hugetlb_fault
  hugetlb_no_page
    /*unlock vma_lock */
    hugetlb_handle_userfault
      handle_userfault
        /* unlock mm->mmap_lock*/
                                           vm_mmap_pgoff
                                             do_mmap
                                               mmap_region
                                                 munmap_vma_range
                                                   /* clean old vma */
        /* lock vma_lock again  <--- UAF */
    /* unlock vma_lock */

Since the vma_lock will unlock immediately after
hugetlb_handle_userfault(), let's drop the unneeded lock and unlock in
hugetlb_handle_userfault() to fix the issue.

[1] https://lore.kernel.org/linux-mm/000000000000d5e00a05e834962e@google.com/
[2] https://lore.kernel.org/linux-mm/20220921014457.1668-1-liuzixian4@huawei.com/
Link: https://lkml.kernel.org/r/20220923042113.137273-1-liushixin2@huawei.com
Fixes: 1a1aad8a9b7b ("userfaultfd: hugetlbfs: add userfaultfd hugetlb hook")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reported-by: syzbot+193f9cee8638750b23cf@syzkaller.appspotmail.com
Reported-by: Liu Zixian <liuzixian4@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/rw: fix unexpected link breakage

[ upstream commit bf68b5b34311ee57ed40749a1257a30b46127556 ]

req->cqe.res is set in io_read() to the amount of bytes left to be done,
which is used to figure out whether to fail a read or not. However,
io_read() may do another without returning, and we stash the previous
value into ->bytes_done but forget to update cqe.res. Then we ask a read
to do strictly less than cqe.res but expect the return to be exactly
cqe.res.

Fix the bug by updating cqe.res for retries.

Cc: stable@vger.kernel.org
Reported-and-Tested-by: Beld Zhang <beldzhang@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3a1088440c7be98e5800267af922a67da0ef9f13.1664235732.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/rw: fix error'ed retry return values

[ upstream commit 62bb0647b14646fa6c9aa25ecdf67ad18f13523c ]

Kernel test robot reports that we test negativity of an unsigned in
io_fixup_rw_res() after a recent change, which masks error codes and
messes up the return value in case I/O is re-retried and failed with
an error.

Fixes: 4d9cb92ca41dd ("io_uring/rw: fix short rw error handling")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9754a0970af1861e7865f9014f735c70dc60bf79.1663071587.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/rw: fix short rw error handling

[ upstream commit 89473c1a9205760c4fa6d158058da7b594a815f0 ]

We have a couple of problems, first reports of unexpected link breakage
for reads when cqe->res indicates that the IO was done in full. The
reason here is partial IO with retries.

TL;DR; we compare the result in __io_complete_rw_common() against
req->cqe.res, but req->cqe.res doesn't store the full length but rather
the length left to be done. So, when we pass the full corrected result
via kiocb_done() -> __io_complete_rw_common(), it fails.

The second problem is that we don't try to correct res in
io_complete_rw(), which, for instance, might be a problem for O_DIRECT
but when a prefix of data was cached in the page cache. We also
definitely don't want to pass a corrected result into io_rw_done().

The fix here is to leave __io_complete_rw_common() alone, always pass
not corrected result into it and fix it up as the last step just before
actually finishing the I/O.

Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: correct pinned_vm accounting

[ upstream commit 42b6419d0aba47c5d8644cdc0b68502254671de5 ]

->mm_account should be released only after we free all registered
buffers, otherwise __io_sqe_buffers_unregister() will see a NULL
->mm_account and skip locked_vm accounting.

Cc: <Stable@vger.kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6d798f65ed4ab8db3664c4d3397d4af16ca98846.1664849932.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/af_unix: defer registered files gc to io_uring release

[ upstream commit 0091bfc81741b8d3aeb3b7ab8636f911b2de6e80 ]

Instead of putting io_uring's registered files in unix_gc() we want it
to be done by io_uring itself. The trick here is to consider io_uring
registered files for cycle detection but not actually putting them down.
Because io_uring can't register other ring instances, this will remove
all refs to the ring file triggering the ->release path and clean up
with io_ring_ctx_free().

Cc: stable@vger.kernel.org
Fixes: 6b06314c47e1 ("io_uring: add file set registration")
Reported-and-tested-by: David Bouman <dbouman03@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
[axboe: add kerneldoc comment to skb, fold in skb leak fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc

commit 5a3d47071f0ced0431ef82a5fb6bd077ed9493db upstream.

uClibc segfaulted because NULL was passed as the format to fprintf().

That happened because one of the format strings was missing and
intel_pt_print_info() didn't check that before calling fprintf().

Add the missing format string, and check format is not NULL before calling
fprintf().

Fixes: 11fa7cb86b56d361 ("perf tools: Pass Intel PT information for decoding MTC and CYC")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221012082259.22394-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: bcm2835: Round UART input clock up

[ Upstream commit f690a4d7a8f66430662975511c86819dc9965bcc ]

It was reported that RPi3[1] and RPi Zero 2W boards have issues with
the Bluetooth. It turns out that when switching from initial to
operation speed host and device no longer can talk each other because
host uses incorrect UART baud rate.

The UART driver used in this case is amba-pl011. Original fix, see
below Github link[2], was inside pl011 module, but somehow it didn't
look as the right place to fix. Beside that this original rounding
function is not exactly perfect for all possible clock values. So I
deiced to move the hack to the platform which actually need it.

The UART clock is initialised to be as close to the requested
frequency as possible without exceeding it. Now that there is a
clock manager that returns the actual frequencies, an expected
48MHz clock is reported as 47999625. If the requested baud rate
== requested clock/16, there is no headroom and the slight
reduction in actual clock rate results in failure.

If increasing a clock by less than 0.1% changes it from ..999..
to ..000.., round it up.

[1] https://bugzilla.suse.com/show_bug.cgi?id=1188238
[2] https://github.com/raspberrypi/linux/commit/ab3f1b39537f6d3825b8873006fbe2fc5ff057b7

Cc: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220912081306.24662-1-iivanov@suse.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: bcm2835: Make peripheral PLLC critical

[ Upstream commit 6c5422851d8be8c7451e968fd2e6da41b6109e17 ]

When testing for a series affecting the VEC, it was discovered that
turning off and on the VEC clock is crashing the system.

It turns out that, when disabling the VEC clock, it's the only child of
the PLLC-per clock which will also get disabled. The source of the crash
is PLLC-per being disabled.

It's likely that some other device might not take a clock reference that
it actually needs, but it's unclear which at this point. Let's make
PLLC-per critical so that we don't have that crash.

Reported-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220926084509.12233-1-maxime@cerno.tech
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: idmouse: fix an uninit-value in idmouse_open

[ Upstream commit bce2b0539933e485d22d6f6f076c0fcd6f185c4c ]

In idmouse_create_image, if any ftip_command fails, it will
go to the reset label. However, this leads to the data in
bulk_in_buffer[HEADER..IMGSIZE] uninitialized. And the check
for valid image incurs an uninitialized dereference.

Fix this by moving the check before reset label since this
check only be valid if the data after bulk_in_buffer[HEADER]
has concrete data.

Note that this is found by KMSAN, so only kernel compilation
is tested.

Reported-by: syzbot+79832d33eb89fb3cd092@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20220922134847.1101921-1-dzm91@hust.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet-tcp: add bounds check on Transfer Tag

[ Upstream commit b6a545ffa2c192b1e6da4a7924edac5ba9f4ea2b ]

ttag is used as an index to get cmd in nvmet_tcp_handle_h2c_data_pdu(),
add a bounds check to avoid out-of-bounds access.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: copy firmware_rev on each init

[ Upstream commit a8eb6c1ba48bddea82e8d74cbe6e119f006be97d ]

The firmware revision can change on after a reset so copy the most
recent info each time instead of just the first time, otherwise the
sysfs firmware_rev entry may contain stale data.

Reported-by: Jeff Lien <jeff.lien@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext2: Use kvmalloc() for group descriptor array

[ Upstream commit e7c7fbb9a8574ebd89cc05db49d806c7476863ad ]

Array of group descriptor block buffers can get rather large. In theory
in can reach 1MB for perfectly valid filesystem and even more for
maliciously crafted ones. Use kvmalloc() to allocate the array to avoid
straining memory allocator with large order allocations unnecessarily.

Reported-by: syzbot+0f2f7e65a3007d39539f@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: tracing: Fix compile error in trace_array calls when TRACING is disabled

[ Upstream commit 1a77dd1c2bb5d4a58c16d198cf593720787c02e4 ]

Fix this compilation error seen when CONFIG_TRACING is not enabled:

drivers/scsi/qla2xxx/qla_os.c: In function 'qla_trace_init':
drivers/scsi/qla2xxx/qla_os.c:2854:25: error: implicit declaration of function
'trace_array_get_by_name'; did you mean 'trace_array_set_clr_event'?
[-Werror=implicit-function-declaration]
 2854 |         qla_trc_array = trace_array_get_by_name("qla2xxx");
      |                         ^~~~~~~~~~~~~~~~~~~~~~~
      |                         trace_array_set_clr_event

drivers/scsi/qla2xxx/qla_os.c: In function 'qla_trace_uninit':
drivers/scsi/qla2xxx/qla_os.c:2869:9: error: implicit declaration of function
'trace_array_put' [-Werror=implicit-function-declaration]
 2869 |         trace_array_put(qla_trc_array);
      |         ^~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20220907233308.4153-2-aeasi@marvell.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8723bs: fix a potential memory leak in rtw_init_cmd_priv()

[ Upstream commit 708056fba733a73d926772ea4ce9a42d240345da ]

In rtw_init_cmd_priv(), if `pcmdpriv->rsp_allocated_buf` is allocated
in failure, then `pcmdpriv->cmd_allocated_buf` will be not properly
released. Besides, considering there are only two error paths and the
first one can directly return, so we do not need implicitly jump to the
`exit` tag to execute the error handler.

So this patch added `kfree(pcmdpriv->cmd_allocated_buf);` on the error
path to release the resource and simplified the return logic of
rtw_init_cmd_priv(). As there is no proper device to test with, no runtime
testing was performed.

Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_2B7931B79BA38E22205C5A09EFDF11E48805@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8723bs: fix potential memory leak in rtw_init_drv_sw()

[ Upstream commit 5a5aa9cce621e2c0e25a1e5d72d6be1749167cc0 ]

In rtw_init_drv_sw(), there are various init functions are called to
populate the padapter structure and some checks for their return value.
However, except for the first one error path, the other five error paths
do not properly release the previous allocated resources, which leads to
various memory leaks.

This patch fixes them and keeps the success and error separate.
Note that these changes keep the form of `rtw_init_drv_sw()` in
"drivers/staging/r8188eu/os_dep/os_intfs.c". As there is no proper device
to test with, no runtime testing was performed.

Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_C3B899D2FC3F1BC827F3552E0B0734056006@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "usb: storage: Add quirk for Samsung Fit flash"

[ Upstream commit ad5dbfc123e6ffbbde194e2a4603323e09f741ee ]

This reverts commit 86d92f5465958752481269348d474414dccb1552,
which fix the timeout issue for "Samsung Fit Flash".

But the commit affects not only "Samsung Fit Flash" but also other usb
storages that use the same controller and causes severe performance
regression.

 # hdparm -t /dev/sda (without the quirk)
 Timing buffered disk reads: 622 MB in  3.01 seconds = 206.66 MB/sec

 # hdparm -t /dev/sda (with the quirk)
 Timing buffered disk reads: 220 MB in  3.00 seconds =  73.32 MB/sec

The commit author mentioned that "Issue was reproduced after device has
bad block", so this quirk should be applied when we have the timeout
issue with a device that has bad blocks.

We revert the commit so that we apply this quirk by adding kernel
paramters using a bootloader or other ways when we really need it,
without the performance regression with devices that don't have the
issue.

Signed-off-by: sunghwan jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20220913114913.3073-1-onenowy@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: core: Enable GUCTL1 bit 10 for fixing termination error after resume bug

[ Upstream commit 63d7f9810a38102cdb8cad214fac98682081e1a7 ]

When configured in HOST mode, after issuing U3/L2 exit controller fails
to send proper CRC checksum in CRC5 field. Because of this behavior
Transaction Error is generated, resulting in reset and re-enumeration of
usb device attached. Enabling chicken bit 10 of GUCTL1 will correct this
problem.

When this bit is set to '1', the UTMI/ULPI opmode will be changed to
"normal" along with HS terminations, term, and xcvr signals after EOR.
This option is to support certain legacy UTMI/ULPI PHYs.

Added "snps,resume-hs-terminations" quirk to resolved the above issue.

Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20220920052235.194272-3-piyush.mehta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mp: Add snps,gfladj-refclk-lpm-sel quirk to USB nodes

[ Upstream commit 5c3d5ecf48ab06c709c012bf1e8f0c91e1fcd7ad ]

With this set the SOF/ITP counter is based on ref_clk when 2.0 ports are
suspended.
snps,dis-u2-freeclk-exists-quirk can be removed as
snps,gfladj-refclk-lpm-sel also clears the free running clock configuration
bit.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220915062855.751881-4-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: musb: Fix musb_gadget.c rxstate overflow bug

[ Upstream commit eea4c860c3b366369eff0489d94ee4f0571d467d ]

The usb function device call musb_gadget_queue() adds the passed
request to musb_ep::req_list,If the (request->length > musb_ep->packet_sz)
and (is_buffer_mapped(req) return false),the rxstate() will copy all data
in fifo to request->buf which may cause request->buf out of bounds.

Fix it by add the length check :
fifocnt = min_t(unsigned, request->length - request->actual, fifocnt);

Signed-off-by: Robin Guo <guoweibin@inspur.com>
Link: https://lore.kernel.org/r/20220906102119.1b071d07a8391ff115e6d1ef@inspur.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()

[ Upstream commit 7e271f42a5cc3768cd2622b929ba66859ae21f97 ]

xhci_alloc_stream_info() allocates stream context array for stream_info
->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs,
stream_info->stream_ctx_array is not released, which will lead to a
memory leak.

We can fix it by releasing the stream_info->stream_ctx_array with
xhci_free_stream_ctx() on the error path to avoid the potential memory
leak.

Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220921123450.671459-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d

[ Upstream commit 5e2cf333b7bd5d3e62595a44d598a254c697cd74 ]

A complicated deadlock exists when using the journal and an elevated
group_thrtead_cnt. It was found with loop devices, but its not clear
whether it can be seen with real disks. The deadlock can occur simply
by writing data with an fio script.

When the deadlock occurs, multiple threads will hang in different ways:

 1) The group threads will hang in the blk-wbt code with bios waiting to
    be submitted to the block layer:

        io_schedule+0x70/0xb0
        rq_qos_wait+0x153/0x210
        wbt_wait+0x115/0x1b0
        io_schedule+0x70/0xb0
        rq_qos_wait+0x153/0x210
        wbt_wait+0x115/0x1b0
        __rq_qos_throttle+0x38/0x60
        blk_mq_submit_bio+0x589/0xcd0
        wbt_wait+0x115/0x1b0
        __rq_qos_throttle+0x38/0x60
        blk_mq_submit_bio+0x589/0xcd0
        __submit_bio+0xe6/0x100
        submit_bio_noacct_nocheck+0x42e/0x470
        submit_bio_noacct+0x4c2/0xbb0
        ops_run_io+0x46b/0x1a30
        handle_stripe+0xcd3/0x36b0
        handle_active_stripes.constprop.0+0x6f6/0xa60
        raid5_do_work+0x177/0x330

    Or:
        io_schedule+0x70/0xb0
        rq_qos_wait+0x153/0x210
        wbt_wait+0x115/0x1b0
        __rq_qos_throttle+0x38/0x60
        blk_mq_submit_bio+0x589/0xcd0
        __submit_bio+0xe6/0x100
        submit_bio_noacct_nocheck+0x42e/0x470
        submit_bio_noacct+0x4c2/0xbb0
        flush_deferred_bios+0x136/0x170
        raid5_do_work+0x262/0x330

 2) The r5l_reclaim thread will hang in the same way, submitting a
    bio to the block layer:

        io_schedule+0x70/0xb0
        rq_qos_wait+0x153/0x210
        wbt_wait+0x115/0x1b0
        __rq_qos_throttle+0x38/0x60
        blk_mq_submit_bio+0x589/0xcd0
        __submit_bio+0xe6/0x100
        submit_bio_noacct_nocheck+0x42e/0x470
        submit_bio_noacct+0x4c2/0xbb0
        submit_bio+0x3f/0xf0
        md_super_write+0x12f/0x1b0
        md_update_sb.part.0+0x7c6/0xff0
        md_update_sb+0x30/0x60
        r5l_do_reclaim+0x4f9/0x5e0
        r5l_reclaim_thread+0x69/0x30b

    However, before hanging, the MD_SB_CHANGE_PENDING flag will be
    set for sb_flags in r5l_write_super_and_discard_space(). This
    flag will never be cleared because the submit_bio() call never
    returns.

 3) Due to the MD_SB_CHANGE_PENDING flag being set, handle_stripe()
    will do no processing on any pending stripes and re-set
    STRIPE_HANDLE. This will cause the raid5d thread to enter an
    infinite loop, constantly trying to handle the same stripes
    stuck in the queue.

    The raid5d thread has a blk_plug that holds a number of bios
    that are also stuck waiting seeing the thread is in a loop
    that never schedules. These bios have been accounted for by
    blk-wbt thus preventing the other threads above from
    continuing when they try to submit bios. --Deadlock.

To fix this, add the same wait_event() that is used in raid5_do_work()
to raid5d() such that if MD_SB_CHANGE_PENDING is set, the thread will
schedule and wait until the flag is cleared. The schedule action will
flush the plug which will allow the r5l_reclaim thread to continue,
thus preventing the deadlock.

However, md_check_recovery() calls can also clear MD_SB_CHANGE_PENDING
from the same thread and can thus deadlock if the thread is put to
sleep. So avoid waiting if md_check_recovery() is being called in the
loop.

It's not clear when the deadlock was introduced, but the similar
wait_event() call in raid5_do_work() was added in 2017 by this
commit:

    16d997b78b15 ("md/raid5: simplfy delaying of writes while metadata
                   is updated.")

Link: https://lore.kernel.org/r/7f3b87b6-b52a-f737-51d7-a4eec5c44112@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

eventfd: guard wake_up in eventfd fs calls as well

[ Upstream commit 9f0deaa12d832f488500a5afe9b912e9b3cfc432 ]

Guard wakeups that the user can trigger, and that may end up triggering a
call back into eventfd_signal. This is in addition to the current approach
that only guards in eventfd_signal.

Rename in_eventfd_signal -> in_eventfd at the same time to reflect this.

Without this there would be a deadlock in the following code using libaio:

int main()
{
struct io_context *ctx = NULL;
struct iocb iocb;
struct iocb *iocbs[] = { &iocb };
int evfd;
        uint64_t val = 1;

evfd = eventfd(0, EFD_CLOEXEC);
assert(!io_setup(2, &ctx));
io_prep_poll(&iocb, evfd, POLLIN);
io_set_eventfd(&iocb, evfd);
assert(1 == io_submit(ctx, 1, iocbs));
        write(evfd, &val, 8);
}

Signed-off-by: Dylan Yudaken <dylany@fb.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220816135959.1490641-1-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: roccat: Fix use-after-free in roccat_read()

[ Upstream commit cacdb14b1c8d3804a3a7d31773bc7569837b71a4 ]

roccat_report_event() is responsible for registering
roccat-related reports in struct roccat_device.

int roccat_report_event(int minor, u8 const *data)
{
struct roccat_device *device;
struct roccat_reader *reader;
struct roccat_report *report;
uint8_t *new_value;

device = devices[minor];

new_value = kmemdup(data, device->report_size, GFP_ATOMIC);
if (!new_value)
return -ENOMEM;

report = &device->cbuf[device->cbuf_end];

/* passing NULL is safe */
kfree(report->value);
...

The registered report is stored in the struct roccat_device member
"struct roccat_report cbuf[ROCCAT_CBUF_SIZE];".
If more reports are received than the "ROCCAT_CBUF_SIZE" value,
kfree() the saved report from cbuf[0] and allocates a new reprot.
Since there is no lock when this kfree() is performed,
kfree() can be performed even while reading the saved report.

static ssize_t roccat_read(struct file *file, char __user *buffer,
size_t count, loff_t *ppos)
{
struct roccat_reader *reader = file->private_data;
struct roccat_device *device = reader->device;
struct roccat_report *report;
ssize_t retval = 0, len;
DECLARE_WAITQUEUE(wait, current);

mutex_lock(&device->cbuf_lock);

...

report = &device->cbuf[reader->cbuf_start];
/*
 * If report is larger than requested amount of data, rest of report
 * is lost!
 */
len = device->report_size > count ? count : device->report_size;

if (copy_to_user(buffer, report->value, len)) {
retval = -EFAULT;
goto exit_unlock;
}
...

The roccat_read() function receives the device->cbuf report and
delivers it to the user through copy_to_user().
If the N+ROCCAT_CBUF_SIZE th report is received while copying of
the Nth report->value is in progress, the pointer that copy_to_user()
is working on is kfree()ed and UAF read may occur. (race condition)

Since the device node of this driver does not set separate permissions,
this is not a security vulnerability, but because it is used for
requesting screen display of profile or dpi settings,
a user using the roccat device can apply udev to this device node or
There is a possibility to use it by giving.

Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soundwire: intel: fix error handling on dai registration issues

[ Upstream commit c6867cda906aadbce5e71efde9c78a26108b2bad ]

The call to intel_register_dai() may fail because of memory allocation
issues or problems reported by the ASoC core. In all cases, when a
error is thrown the component is not registered, it's invalid to
unregister it.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220919175721.354679-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soundwire: cadence: Don't overwrite msg->buf during write commands

[ Upstream commit ba05b39d265bdd16913f7684600d9d41e2796745 ]

The buf passed in struct sdw_msg must only be written for a READ,
in that case the RDATA part of the response is the data value of the
register.

For a write command there is no RDATA, and buf should be assumed to
be const and unmodifable. The original caller should not expect its data
buffer to be corrupted by an sdw_nwrite().

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220916103505.1562210-1-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: fix set_at_max_writeback_rate() for multiple attached devices

[ Upstream commit d2d05b88035d2d51a5bb6c5afec88a0880c73df4 ]

Inside set_at_max_writeback_rate() the calculation in following if()
check is wrong,
if (atomic_inc_return(&c->idle_counter) <
    atomic_read(&c->attached_dev_nr) * 6)

Because each attached backing device has its own writeback thread
running and increasing c->idle_counter, the counter increates much
faster than expected. The correct calculation should be,
(counter / dev_nr) < dev_nr * 6
which equals to,
counter < dev_nr * dev_nr * 6

This patch fixes the above mistake with correct calculation, and helper
routine idle_counter_exceeded() is added to make code be more clear.

Reported-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Link: https://lore.kernel.org/r/20220919161647.81238-6-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ata: libahci_platform: Sanity check the DT child nodes number

[ Upstream commit 3c132ea6508b34956e5ed88d04936983ec230601 ]

Having greater than AHCI_MAX_PORTS (32) ports detected isn't that critical
from the further AHCI-platform initialization point of view since
exceeding the ports upper limit will cause allocating more resources than
will be used afterwards. But detecting too many child DT-nodes doesn't
seem right since it's very unlikely to have it on an ordinary platform. In
accordance with the AHCI specification there can't be more than 32 ports
implemented at least due to having the CAP.NP field of 5 bits wide and the
PI register of dword size. Thus if such situation is found the DTB must
have been corrupted and the data read from it shouldn't be reliable. Let's
consider that as an erroneous situation and halt further resources
allocation.

Note it's logically more correct to have the nports set only after the
initialization value is checked for being sane. So while at it let's make
sure nports is assigned with a correct value.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-throttle: prevent overflow while calculating wait time

[ Upstream commit 8d6bbaada2e0a65f9012ac4c2506460160e7237a ]

There is a problem found by code review in tg_with_in_bps_limit() that
'bps_limit * jiffy_elapsed_rnd' might overflow. Fix the problem by
calling mul_u64_u64_div_u64() instead.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220829022240.3348319-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: vt6655: fix potential memory leak

[ Upstream commit c8ff91535880d41b49699b3829fb6151942de29e ]

In function device_init_td0_ring, memory is allocated for member
td_info of priv->apTD0Rings[i], with i increasing from 0. In case of
allocation failure, the memory is freed in reversed order, with i
decreasing to 0. However, the case i=0 is left out and thus memory is
leaked.

Modify the memory freeing loop to include the case i=0.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20220909141338.19343-1-namcaov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: adp5061: fix out-of-bounds read in adp5061_get_chg_type()

[ Upstream commit 9d47e01b9d807808224347935562f7043a358054 ]

ADP5061_CHG_STATUS_1_CHG_STATUS is masked with 0x07, which means a length
of 8, but adp5061_chg_type array size is 4, may end up reading 4 elements
beyond the end of the adp5061_chg_type[] array.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to identity

[ Upstream commit 24b6c7798a0122012ca848ea0d25e973334266b0 ]

The DMA operations of HiSilicon PTT device can only work properly with
identical mappings. So add a quirk for the device to force the domain
as passthrough.

Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20220816114414.4092-2-yangyicong@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: Fix hung when signal interrupts nbd_start_device_ioctl()

[ Upstream commit 1de7c3cf48fc41cd95adb12bd1ea9033a917798a ]

syzbot reported hung task [1].  The following program is a simplified
version of the reproducer:

int main(void)
{
int sv[2], fd;

if (socketpair(AF_UNIX, SOCK_STREAM, 0, sv) < 0)
return 1;
if ((fd = open("/dev/nbd0", 0)) < 0)
return 1;
if (ioctl(fd, NBD_SET_SIZE_BLOCKS, 0x81) < 0)
return 1;
if (ioctl(fd, NBD_SET_SOCK, sv[0]) < 0)
return 1;
if (ioctl(fd, NBD_DO_IT) < 0)
return 1;
return 0;
}

When signal interrupt nbd_start_device_ioctl() waiting the condition
atomic_read(&config->recv_threads) == 0, the task can hung because it
waits the completion of the inflight IOs.

This patch fixes the issue by clearing queue, not just shutdown, when
signal interrupt nbd_start_device_ioctl().

Link: https://syzkaller.appspot.com/bug?id=7d89a3ffacd2b83fdd39549bc4d8e0a89ef21239
Reported-by: syzbot+38e6c55d4969a14c1534@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220907163502.577561-1-syoshida@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: 3w-9xxx: Avoid disabling device if failing to enable it

[ Upstream commit 7eff437b5ee1309b34667844361c6bbb5c97df05 ]

The original code will "goto out_disable_device" and call
pci_disable_device() if pci_enable_device() fails. The kernel will generate
a warning message like "3w-9xxx 0000:00:05.0: disabling already-disabled
device".

We shouldn't disable a device that failed to be enabled. A simple return is
fine.

Link: https://lore.kernel.org/r/20220829110115.38789-1-fantasquex@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ti: k3-udma: Reset UDMA_CHAN_RT byte counters to prevent overflow

[ Upstream commit 7c94dcfa8fcff2dba53915f1dabfee49a3df8b88 ]

UDMA_CHAN_RT_*BCNT_REG stores the real-time channel bytecount statistics.
These registers are 32-bit hardware counters and the driver uses these
counters to monitor the operational progress status for a channel, when
transferring more than 4GB of data it was observed that these counters
overflow and completion calculation of a operation gets affected and the
transfer hangs indefinitely.

This commit adds changes to decrease the byte count for every complete
transaction so that these registers never overflow and the proper byte
count statistics is maintained for ongoing transaction by the RT counters.

Earlier uc->bcnt used to maintain a count of the completed bytes at driver
side, since the RT counters maintain the statistics of current transaction
now, the maintenance of uc->bcnt is not necessary.

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220802054835.19482-1-vaishnav.a@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: xhci-plat: suspend/resume clks for brcm

[ Upstream commit c69400b09e471a3f1167adead55a808f0da6534a ]

The xhci_plat_brcm xhci block can enter suspend with clock disabled to save
power and re-enable them on resume. Make use of the XHCI_SUSPEND_RESUME_CLKS
quirk to do so.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Link: https://lore.kernel.org/r/1660170455-15781-3-git-send-email-justinpopo6@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: xhci-plat: suspend and resume clocks

[ Upstream commit 8bd954c56197caf5e3a804d989094bc3fe6329aa ]

Introduce XHCI_SUSPEND_RESUME_CLKS quirk as a means to suspend and resume
clocks if the hardware is capable of doing so. We assume that clocks will
be needed if the device may wake.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Link: https://lore.kernel.org/r/1660170455-15781-2-git-send-email-justinpopo6@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rate

[ Upstream commit 30eaf02149ecc3c5815e45d27187bf09e925071d ]

The function zynqmp_pll_round_rate is used to find a most appropriate
PLL frequency which the hardware can generate according to the desired
frequency. For example, if the desired frequency is 297MHz, considering
the limited range from PS_PLL_VCO_MIN (1.5GHz) to PS_PLL_VCO_MAX (3.0GHz)
of PLL, zynqmp_pll_round_rate should return 1.872GHz (297MHz * 5).

There are two problems with the current code of zynqmp_pll_round_rate:

1) When the rate is below PS_PLL_VCO_MIN, it can't find a correct rate
when the parameter "rate" is an integer multiple of *prate, in other words,
if "f" is zero, zynqmp_pll_round_rate won't return a valid frequency which
is from PS_PLL_VCO_MIN to PS_PLL_VCO_MAX. For example, *prate is 33MHz
and the rate is 660MHz, zynqmp_pll_round_rate will not boost up rate and
just return 660MHz, and this will cause clk_calc_new_rates failure since
zynqmp_pll_round_rate returns an invalid rate out of its boundaries.

2) Even if the rate is higher than PS_PLL_VCO_MIN, there is still a risk
that zynqmp_pll_round_rate returns an invalid rate because the function
DIV_ROUND_CLOSEST makes some loss in the fractional part. If the parent
clock *prate is 33333333Hz and we want to set the PLL rate to 1.5GHz,
this function will return 1499999985Hz by using the formula below:
    value = *prate * DIV_ROUND_CLOSEST(rate, *prate)).
This value is also invalid since it's slightly smaller than PS_PLL_VCO_MIN.
because DIV_ROUND_CLOSEST makes some loss in the fractional part.

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20220826142030.213805-1-quanyang.wang@windriver.com
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: platform: fix some double free in meson-ge2d and mtk-jpeg and s5p-mfc

[ Upstream commit c65c3f3a2cbf21ed429d9b9c725bdb5dc6abf4cf ]

video_unregister_device will release device internally. There is no need to
call video_device_release after video_unregister_device.

Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cx88: Fix a null-ptr-deref bug in buffer_prepare()

[ Upstream commit 2b064d91440b33fba5b452f2d1b31f13ae911d71 ]

When the driver calls cx88_risc_buffer() to prepare the buffer, the
function call may fail, resulting in a empty buffer and null-ptr-deref
later in buffer_queue().

The following log can reveal it:

[   41.822762] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
[   41.824488] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[   41.828027] RIP: 0010:buffer_queue+0xc2/0x500
[   41.836311] Call Trace:
[   41.836945]  __enqueue_in_driver+0x141/0x360
[   41.837262]  vb2_start_streaming+0x62/0x4a0
[   41.838216]  vb2_core_streamon+0x1da/0x2c0
[   41.838516]  __vb2_init_fileio+0x981/0xbc0
[   41.839141]  __vb2_perform_fileio+0xbf9/0x1120
[   41.840072]  vb2_fop_read+0x20e/0x400
[   41.840346]  v4l2_read+0x215/0x290
[   41.840603]  vfs_read+0x162/0x4c0

Fix this by checking the return value of cx88_risc_buffer()

[hverkuil: fix coding style issues]

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: zynqmp: Fix stack-out-of-bounds in strncpy`

[ Upstream commit dd80fb2dbf1cd8751efbe4e53e54056f56a9b115 ]

"BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68"

Linux-ATF interface is using 16 bytes of SMC payload. In case clock name is
longer than 15 bytes, string terminated NULL character will not be received
by Linux. Add explicit NULL character at last byte to fix issues when clock
name is longer.

This fixes below bug reported by KASAN:

 ==================================================================
 BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68
 Read of size 1 at addr ffff0008c89a7410 by task swapper/0/1

 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.0-00396-g81ef9e7-dirty #3
 Hardware name: Xilinx Versal vck190 Eval board revA (QSPI) (DT)
 Call trace:
  dump_backtrace+0x0/0x1e8
  show_stack+0x14/0x20
  dump_stack+0xd4/0x108
  print_address_description.isra.0+0xbc/0x37c
  __kasan_report+0x144/0x198
  kasan_report+0xc/0x18
  __asan_load1+0x5c/0x68
  strncpy+0x30/0x68
  zynqmp_clock_probe+0x238/0x7b8
  platform_drv_probe+0x6c/0xc8
  really_probe+0x14c/0x418
  driver_probe_device+0x74/0x130
  __device_attach_driver+0xc4/0xe8
  bus_for_each_drv+0xec/0x150
  __device_attach+0x160/0x1d8
  device_initial_probe+0x10/0x18
  bus_probe_device+0xe0/0xf0
  device_add+0x528/0x950
  of_device_add+0x5c/0x80
  of_platform_device_create_pdata+0x120/0x168
  of_platform_bus_create+0x244/0x4e0
  of_platform_populate+0x50/0xe8
  zynqmp_firmware_probe+0x370/0x3a8
  platform_drv_probe+0x6c/0xc8
  really_probe+0x14c/0x418
  driver_probe_device+0x74/0x130
  device_driver_attach+0x94/0xa0
  __driver_attach+0x70/0x108
  bus_for_each_dev+0xe4/0x158
  driver_attach+0x30/0x40
  bus_add_driver+0x21c/0x2b8
  driver_register+0xbc/0x1d0
  __platform_driver_register+0x7c/0x88
  zynqmp_firmware_driver_init+0x1c/0x24
  do_one_initcall+0xa4/0x234
  kernel_init_freeable+0x1b0/0x24c
  kernel_init+0x10/0x110
  ret_from_fork+0x10/0x18

 The buggy address belongs to the page:
 page:ffff0008f9be1c88 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
 raw: 0008d00000000000 ffff0008f9be1c90 ffff0008f9be1c90 0000000000000000
 raw: 0000000000000000 0000000000000000 00000000ffffffff
 page dumped because: kasan: bad access detected

 addr ffff0008c89a7410 is located in stack of task swapper/0/1 at offset 112 in frame:
  zynqmp_clock_probe+0x0/0x7b8

 this frame has 3 objects:
  [32, 44) 'response'
  [64, 80) 'ret_payload'
  [96, 112) 'name'

 Memory state around the buggy address:
  ffff0008c89a7300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ffff0008c89a7380: 00 00 00 00 f1 f1 f1 f1 00 04 f2 f2 00 00 f2 f2
 >ffff0008c89a7400: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
                          ^
  ffff0008c89a7480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ffff0008c89a7500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ==================================================================

Signed-off-by: Ian Nam <young.kwan.nam@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220510070154.29528-3-shubhrajyoti.datta@xilinx.com
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9242/1: kasan: Only map modules if CONFIG_KASAN_VMALLOC=n

[ Upstream commit 823f606ab6b4759a1faf0388abcf4fb0776710d2 ]

In case CONFIG_KASAN_VMALLOC=y kasan_populate_vmalloc() allocates the
shadow pages dynamically. But even worse is that kasan_release_vmalloc()
releases them, which is not compatible with create_mapping() of
MODULES_VADDR..MODULES_END range:

BUG: Bad page state in process kworker/9:1  pfn:2068b
page:e5e06160 refcount:0 mapcount:0 mapping:00000000 index:0x0
flags: 0x1000(reserved)
raw: 00001000 e5e06164 e5e06164 00000000 00000000 00000000 ffffffff 00000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
bad because of flags: 0x1000(reserved)
Modules linked in: ip_tables
CPU: 9 PID: 154 Comm: kworker/9:1 Not tainted 5.4.188-... #1
Hardware name: LSI Axxia AXM55XX
Workqueue: events do_free_init
unwind_backtrace
show_stack
dump_stack
bad_page
free_pcp_prepare
free_unref_page
kasan_depopulate_vmalloc_pte
__apply_to_page_range
apply_to_existing_page_range
kasan_release_vmalloc
__purge_vmap_area_lazy
_vm_unmap_aliases.part.0
__vunmap
do_free_init
process_one_work
worker_thread
kthread

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: don't print information about space cache or tree every remount

[ Upstream commit dbecac26630014d336a8e5ea67096ff18210fb9c ]

btrfs currently prints information about space cache or free space tree
being in use on every remount, regardless whether such remount actually
enabled or disabled one of these features.

This is actually unnecessary since providing remount options changing the
state of these features will explicitly print the appropriate notice.

Let's instead print such unconditional information just on an initial mount
to avoid filling the kernel log when, for example, laptop-mode-tools
remount the fs on some events.

Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: scrub: try to fix super block errors

[ Upstream commit f9eab5f0bba76742af654f33d517bf62a0db8f12 ]

[BUG]
The following script shows that, although scrub can detect super block
errors, it never tries to fix it:

mkfs.btrfs -f -d raid1 -m raid1 $dev1 $dev2
xfs_io -c "pwrite 67108864 4k" $dev2

mount $dev1 $mnt
btrfs scrub start -B $dev2
btrfs scrub start -Br $dev2
umount $mnt

The first scrub reports the super error correctly:

  scrub done for f3289218-abd3-41ac-a630-202f766c0859
  Scrub started:    Tue Aug  2 14:44:11 2022
  Status:           finished
  Duration:         0:00:00
  Total to scrub:   1.26GiB
  Rate:             0.00B/s
  Error summary:    super=1
    Corrected:      0
    Uncorrectable:  0
    Unverified:     0

But the second read-only scrub still reports the same super error:

  Scrub started:    Tue Aug  2 14:44:11 2022
  Status:           finished
  Duration:         0:00:00
  Total to scrub:   1.26GiB
  Rate:             0.00B/s
  Error summary:    super=1
    Corrected:      0
    Uncorrectable:  0
    Unverified:     0

[CAUSE]
The comments already shows that super block can be easily fixed by
committing a transaction:

/*
 * If we find an error in a super block, we just report it.
 * They will get written with the next transaction commit
 * anyway
 */

But the truth is, such assumption is not always true, and since scrub
should try to repair every error it found (except for read-only scrub),
we should really actively commit a transaction to fix this.

[FIX]
Just commit a transaction if we found any super block errors, after
everything else is done.

We cannot do this just after scrub_supers(), as
btrfs_commit_transaction() will try to pause and wait for the running
scrub, thus we can not call it with scrub_lock hold.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: dump extra info if one free space cache has more bitmaps than it should

[ Upstream commit 62cd9d4474282a1eb84f945955c56cbfc42e1ffe ]

There is an internal report on hitting the following ASSERT() in
recalculate_thresholds():

  ASSERT(ctl->total_bitmaps <= max_bitmaps);

Above @max_bitmaps is calculated using the following variables:

- bytes_per_bg
  8 * 4096 * 4096 (128M) for x86_64/x86.

- block_group->length
  The length of the block group.

@max_bitmaps is the rounded up value of block_group->length / 128M.

Normally one free space cache should not have more bitmaps than above
value, but when it happens the ASSERT() can be triggered if
CONFIG_BTRFS_ASSERT is also enabled.

But the ASSERT() itself won't provide enough info to know which is going
wrong.
Is the bg too small thus it only allows one bitmap?
Or is there something else wrong?

So although I haven't found extra reports or crash dump to do further
investigation, add the extra info to make it more helpful to debug.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mq-librem5: Add bq25895 as max17055's power supply

[ Upstream commit 6effe295e1a87408033c29dbcea9d5a5c8b937d5 ]

This allows the userspace to notice that there's not enough
current provided to charge the battery, and also fixes issues
with 0% SOC values being considered invalid.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kselftest/arm64: Fix validatation termination record after EXTRA_CONTEXT

[ Upstream commit 5c152c2f66f9368394b89ac90dc7483476ef7b88 ]

When arm64 signal context data overflows the base struct sigcontext it gets
placed in an extra buffer pointed to by a record of type EXTRA_CONTEXT in
the base struct sigcontext which is required to be the last record in the
base struct sigframe. The current validation code attempts to check this
by using GET_RESV_NEXT_HEAD() to step forward from the current record to
the next but that is a macro which assumes it is being provided with a
struct _aarch64_ctx and uses the size there to skip forward to the next
record. Instead validate_extra_context() passes it a struct extra_context
which has a separate size field. This compiles but results in us trying
to validate a termination record in completely the wrong place, at best
failing validation and at worst just segfaulting. Fix this by passing
the struct _aarch64_ctx we meant to into the macro.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6sx: add missing properties for sram

[ Upstream commit 415432c008b2bce8138841356ba444631cabaa50 ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6sll: add missing properties for sram

[ Upstream commit 7492a83ed9b7a151e2dd11d64b06da7a7f0fa7f9 ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6sl: add missing properties for sram

[ Upstream commit 60c9213a1d9941a8b33db570796c3f9be8984974 ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6qp: add missing properties for sram

[ Upstream commit 088fe5237435ee2f7ed4450519b2ef58b94c832f ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@940000: '#address-cells' is a required property
sram@940000: '#size-cells' is a required property
sram@940000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6dl: add missing properties for sram

[ Upstream commit f5848b95633d598bacf0500e0108dc5961af88c0 ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6q: add missing properties for sram

[ Upstream commit b11d083c5dcec7c42fe982c854706d404ddd3a5f ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx7d-sdb: config the max pressure for tsc2046

[ Upstream commit e7c4ebe2f9cd68588eb24ba4ed122e696e2d5272 ]

Use the general touchscreen method to config the max pressure for
touch tsc2046(data sheet suggest 8 bit pressure), otherwise, for
ABS_PRESSURE, when config the same max and min value, weston will
meet the following issue,

[17:19:39.183] event1  - ADS7846 Touchscreen: is tagged by udev as: Touchscreen
[17:19:39.183] event1  - ADS7846 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE
[17:19:39.183] event1  - ADS7846 Touchscreen: was rejected
[17:19:39.183] event1  - not using input device '/dev/input/event1'

This will then cause the APP weston-touch-calibrator can't list touch devices.

root@imx6ul7d:~# weston-touch-calibrator
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
No devices listed.

And accroding to binding Doc, "ti,x-max", "ti,y-max", "ti,pressure-max"
belong to the deprecated properties, so remove them. Also for "ti,x-min",
"ti,y-min", "ti,x-plate-ohms", the value set in dts equal to the default
value in driver, so are redundant, also remove here.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Remove interface for periodic interrupt 1

[ Upstream commit 97d8d6f075bd8f988589be02b91f6fa644d0b0b8 ]

[why]
Only a single VLINE interrupt is available so interface should not
expose the second one which is used by DMU firmware.

[how]
Remove references to periodic_interrupt1 and VLINE1 from DC interfaces.

Reviewed-by: Jaehyun Chung <jaehyun.chung@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>