module: avoid setting info->name early in case we can fall back to info->mod->name

[ Upstream commit 708e0ada1916be765b7faa58854062f2bc620bbf ]

In setup_load_info(), info->name (which contains the name of the module,
mostly used for early logging purposes before the module gets set up)
gets unconditionally assigned if .modinfo is missing despite the fact
that there is an if (!info->name) check near the end of the function.
Avoid assigning a placeholder string to info->name if .modinfo doesn't
exist, so that we can fall back to info->mod->name later on.

Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: device stats, log when stats are zeroed

[ Upstream commit a69976bc69308aa475d0ba3b8b3efd1d013c0460 ]

We had a report indicating that some read errors aren't reported by the
device stats in the userland. It is important to have the errors
reported in the device stat as user land scripts might depend on it to
take the reasonable corrective actions. But to debug these issue we need
to be really sure that request to reset the device stat did not come
from the userland itself. So log an info message when device error reset
happens.

For example:
 BTRFS info (device sdc): device stats zeroed by btrfs(9223)

Reported-by: philip@philip-seeger.de
Link: https://www.spinics.net/lists/linux-btrfs/msg96528.html
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: safely advance counter when looking up bio csums

[ Upstream commit 4babad10198fa73fe73239d02c2e99e3333f5f5c ]

Dan's smatch tool reports

  fs/btrfs/file-item.c:295 btrfs_lookup_bio_sums()
  warn: should this be 'count == -1'

which points to the while (count--) loop. With count == 0 the check
itself could decrement it to -1. There's a WARN_ON a few lines below
that has never been seen in practice though.

It turns out that the value of page_bytes_left matches the count (by
sectorsize multiples). The loop never reaches the state where count
would go to -1, because page_bytes_left == 0 is found first and this
breaks out.

For clarity, use only plain check on count (and only for positive
value), decrement safely inside the loop. Any other discrepancy after
the whole bio list processing should be reported by the exising
WARN_ON_ONCE as well.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix possible NULL-pointer dereference in integrity checks

[ Upstream commit 3dbd351df42109902fbcebf27104149226a4fcd9 ]

A user reports a possible NULL-pointer dereference in
btrfsic_process_superblock(). We are assigning state->fs_info to a local
fs_info variable and afterwards checking for the presence of state.

While we would BUG_ON() a NULL state anyways, we can also just remove
the local fs_info copy, as fs_info is only used once as the first
argument for btrfs_num_copies(). There we can just pass in
state->fs_info as well.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205003
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: Remove set but not set variable 'pwm'

[ Upstream commit 9871abffc81048e20f02e15d6aa4558a44ad53ea ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/pwm/pwm-pca9685.c: In function ‘pca9685_pwm_gpio_free’:
drivers/pwm/pwm-pca9685.c:162:21: warning: variable ‘pwm’ set but not used [-Wunused-but-set-variable]

It is never used, and so can be removed. In that case, hold and release
the lock 'pca->lock' can be removed since nothing will be done between
them.

Fixes: e926b12c611c ("pwm: Clear chip_data in pwm_put()")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ide: serverworks: potential overflow in svwks_set_pio_mode()

[ Upstream commit ce1f31b4c0b9551dd51874dd5364654ed4ca13ae ]

The "drive->dn" variable is a u8 controlled by root.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cmd64x: potential buffer overflow in cmd64x_program_timings()

[ Upstream commit 117fcc3053606d8db5cef8821dca15022ae578bb ]

The "drive->dn" value is a u8 and it is controlled by root only, but
it could be out of bounds here so let's check.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional

[ Upstream commit 43efdc8f0e6d7088ec61bd55a73bf853f002d043 ]

In the old code (e.g.) mutex_destroy() was called before
pwmchip_remove(). Between these two calls it is possible that a PWM
callback is used which tries to grab the mutex.

Fixes: 6604c6556db9 ("pwm: Add PWM driver for OMAP using dual-mode timers")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mm: Fix NX bit clearing issue in kernel_map_pages_in_pgd

[ Upstream commit 75fbef0a8b6b4bb19b9a91b5214f846c2dc5139e ]

The following commit:

  15f003d20782 ("x86/mm/pat: Don't implicitly allow _PAGE_RW in kernel_map_pages_in_pgd()")

modified kernel_map_pages_in_pgd() to manage writable permissions
of memory mappings in the EFI page table in a different way, but
in the process, it removed the ability to clear NX attributes from
read-only mappings, by clobbering the clear mask if _PAGE_RW is not
being requested.

Failure to remove the NX attribute from read-only mappings is
unlikely to be a security issue, but it does prevent us from
tightening the permissions in the EFI page tables going forward,
so let's fix it now.

Fixes: 15f003d20782 ("x86/mm/pat: Don't implicitly allow _PAGE_RW in kernel_map_pages_in_pgd()
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200113172245.27925-5-ardb@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix memleak of kobject

[ Upstream commit fe396ad8e7526f059f7b8c7290d33a1b84adacab ]

If kobject_init_and_add() failed, caller needs to invoke kobject_put()
to release kobject explicitly.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog/softlockup: Enforce that timestamp is valid on boot

[ Upstream commit 11e31f608b499f044f24b20be73f1dcab3e43f8a ]

Robert reported that during boot the watchdog timestamp is set to 0 for one
second which is the indicator for a watchdog reset.

The reason for this is that the timestamp is in seconds and the time is
taken from sched clock and divided by ~1e9. sched clock starts at 0 which
means that for the first second during boot the watchdog timestamp is 0,
i.e. reset.

Use ULONG_MAX as the reset indicator value so the watchdog works correctly
right from the start. ULONG_MAX would only conflict with a real timestamp
if the system reaches an uptime of 136 years on 32bit and almost eternity
on 64bit.

Reported-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87o8v3uuzl.fsf@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: fixup DML dependencies

[ Upstream commit 34ad0230062c39cdcba564d16d122c0fb467a7d6 ]

[why]
Need to fix DML portability issues to enable SW unit testing around DML

[how]
Move calcs into dc include folder since multiple components reference it
Remove relative paths to external dependencies

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: fix alternatives with LLVM's integrated assembler

[ Upstream commit c54f90c2627cc316d365e3073614731e17dbc631 ]

LLVM's integrated assembler fails with the following error when
building KVM:

  <inline asm>:12:6: error: expected absolute expression
   .if kvm_update_va_mask == 0
       ^
  <inline asm>:21:6: error: expected absolute expression
   .if kvm_update_va_mask == 0
       ^
  <inline asm>:24:2: error: unrecognized instruction mnemonic
          NOT_AN_INSTRUCTION
          ^
  LLVM ERROR: Error parsing inline asm

These errors come from ALTERNATIVE_CB and __ALTERNATIVE_CFG,
which test for the existence of the callback parameter in inline
assembly using the following expression:

  " .if " __stringify(cb) " == 0\n"

This works with GNU as, but isn't supported by LLVM. This change
splits __ALTERNATIVE_CFG and ALTINSTR_ENTRY into separate macros
to fix the LLVM build.

Link: https://github.com/ClangBuiltLinux/linux/issues/472
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Don't destroy session if there are outstanding connections

[ Upstream commit 54155ed4199c7aa3fd20866648024ab63c96d579 ]

A faulty userspace that calls destroy_session() before destroying the
connections can trigger the failure.  This patch prevents the issue by
refusing to destroy the session if there are outstanding connections.

------------[ cut here ]------------
kernel BUG at mm/slub.c:306!
invalid opcode: 0000 [#1] SMP PTI
CPU: 1 PID: 1224 Comm: iscsid Not tainted 5.4.0-rc2.iscsi+ #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:__slab_free+0x181/0x350
[...]
[ 1209.686056] RSP: 0018:ffffa93d4074fae0 EFLAGS: 00010246
[ 1209.686694] RAX: ffff934efa5ad800 RBX: 000000008010000a RCX: ffff934efa5ad800
[ 1209.687651] RDX: ffff934efa5ad800 RSI: ffffeb4041e96b00 RDI: ffff934efd402c40
[ 1209.688582] RBP: ffffa93d4074fb80 R08: 0000000000000001 R09: ffffffffbb5dfa26
[ 1209.689425] R10: ffff934efa5ad800 R11: 0000000000000001 R12: ffffeb4041e96b00
[ 1209.690285] R13: ffff934efa5ad800 R14: ffff934efd402c40 R15: 0000000000000000
[ 1209.691213] FS:  00007f7945dfb540(0000) GS:ffff934efda80000(0000) knlGS:0000000000000000
[ 1209.692316] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1209.693013] CR2: 000055877fd3da80 CR3: 0000000077384000 CR4: 00000000000006e0
[ 1209.693897] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1209.694773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1209.695631] Call Trace:
[ 1209.695957]  ? __wake_up_common_lock+0x8a/0xc0
[ 1209.696712]  iscsi_pool_free+0x26/0x40
[ 1209.697263]  iscsi_session_teardown+0x2f/0xf0
[ 1209.698117]  iscsi_sw_tcp_session_destroy+0x45/0x60
[ 1209.698831]  iscsi_if_rx+0xd88/0x14e0
[ 1209.699370]  netlink_unicast+0x16f/0x200
[ 1209.699932]  netlink_sendmsg+0x21a/0x3e0
[ 1209.700446]  sock_sendmsg+0x4f/0x60
[ 1209.700902]  ___sys_sendmsg+0x2ae/0x320
[ 1209.701451]  ? cp_new_stat+0x150/0x180
[ 1209.701922]  __sys_sendmsg+0x59/0xa0
[ 1209.702357]  do_syscall_64+0x52/0x160
[ 1209.702812]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1209.703419] RIP: 0033:0x7f7946433914
[...]
[ 1209.706084] RSP: 002b:00007fffb99f2378 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 1209.706994] RAX: ffffffffffffffda RBX: 000055bc869eac20 RCX: 00007f7946433914
[ 1209.708082] RDX: 0000000000000000 RSI: 00007fffb99f2390 RDI: 0000000000000005
[ 1209.709120] RBP: 00007fffb99f2390 R08: 000055bc84fe9320 R09: 00007fffb99f1f07
[ 1209.710110] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000038
[ 1209.711085] R13: 000055bc8502306e R14: 0000000000000000 R15: 0000000000000000
 Modules linked in:
 ---[ end trace a2d933ede7f730d8 ]---

Link: https://lore.kernel.org/r/20191226203148.2172200-1-krisman@collabora.com
Signed-off-by: Nick Black <nlb@google.com>
Co-developed-by: Salman Qazi <sqazi@google.com>
Signed-off-by: Salman Qazi <sqazi@google.com>
Co-developed-by: Junho Ryu <jayr@google.com>
Signed-off-by: Junho Ryu <jayr@google.com>
Co-developed-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: free sysfs kobject

[ Upstream commit 820d366736c949ffe698d3b3fe1266a91da1766d ]

Detected kmemleak.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: set I_LINKABLE early to avoid wrong access by vfs

[ Upstream commit 5b1dbb082f196278f82b6a15a13848efacb9ff11 ]

This patch moves setting I_LINKABLE early in rename2(whiteout) to avoid the
below warning.

[ 3189.163385] WARNING: CPU: 3 PID: 59523 at fs/inode.c:358 inc_nlink+0x32/0x40
[ 3189.246979] Call Trace:
[ 3189.248707]  f2fs_init_inode_metadata+0x2d6/0x440 [f2fs]
[ 3189.251399]  f2fs_add_inline_entry+0x162/0x8c0 [f2fs]
[ 3189.254010]  f2fs_add_dentry+0x69/0xe0 [f2fs]
[ 3189.256353]  f2fs_do_add_link+0xc5/0x100 [f2fs]
[ 3189.258774]  f2fs_rename2+0xabf/0x1010 [f2fs]
[ 3189.261079]  vfs_rename+0x3f8/0xaa0
[ 3189.263056]  ? tomoyo_path_rename+0x44/0x60
[ 3189.265283]  ? do_renameat2+0x49b/0x550
[ 3189.267324]  do_renameat2+0x49b/0x550
[ 3189.269316]  __x64_sys_renameat2+0x20/0x30
[ 3189.271441]  do_syscall_64+0x5a/0x230
[ 3189.273410]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 3189.275848] RIP: 0033:0x7f270b4d9a49

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE

[ Upstream commit d71e01716b3606a6648df7e5646ae12c75babde4 ]

If, for some bizarre reason, the compiler decided to split up the write
of STE DWORD 0, we could end up making a partial structure valid.

Although this probably won't happen, follow the example of the
context-descriptor code and use WRITE_ONCE() to ensure atomicity of the
write.

Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: musb: omap2430: Get rid of musb .set_vbus for omap2430 glue

[ Upstream commit 91b6dec32e5c25fbdbb564d1e5af23764ec17ef1 ]

We currently have musb_set_vbus() called from two different paths. Mostly
it gets called from the USB PHY via omap_musb_set_mailbox(), but in some
cases it can get also called from musb_stage0_irq() rather via .set_vbus:

(musb_set_host [musb_hdrc])
(omap2430_musb_set_vbus [omap2430])
(musb_stage0_irq [musb_hdrc])
(musb_interrupt [musb_hdrc])
(omap2430_musb_interrupt [omap2430])

This is racy and will not work with introducing generic helper functions
for musb_set_host() and musb_set_peripheral(). We want to get rid of the
busy loops in favor of usleep_range().

Let's just get rid of .set_vbus for omap2430 glue layer and let the PHY
code handle VBUS with musb_set_vbus(). Note that in the follow-up patch
we can completely remove omap2430_musb_set_vbus(), but let's do it in a
separate patch as this change may actually turn out to be needed as a
fix.

Reported-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200115132547.364-5-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: prevent memory leak in vmw_cmdbuf_res_add

[ Upstream commit 40efb09a7f53125719e49864da008495e39aaa1e ]

In vmw_cmdbuf_res_add if drm_ht_insert_item fails the allocated memory
for cres should be released.

Fixes: 18e4a4669c50 ("drm/vmwgfx: Fix compat shader namespace")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/fault/gv100-: fix memory leak on module unload

[ Upstream commit 633cc9beeb6f9b5fa2f17a2a9d0e2790cb6c3de7 ]

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/drm/ttm: Remove set but not used variable 'mem'

[ Upstream commit 2e4534a22794746b11a794b2229b8d58797eccce ]

drivers/gpu/drm/nouveau/nouveau_ttm.c: In function nouveau_vram_manager_new:
drivers/gpu/drm/nouveau/nouveau_ttm.c:66:22: warning: variable mem set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/nouveau/nouveau_ttm.c: In function nouveau_gart_manager_new:
drivers/gpu/drm/nouveau/nouveau_ttm.c:106:22: warning: variable mem set but not used [-Wunused-but-set-variable]

They are not used any more, so remove it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau: Fix copy-paste error in nouveau_fence_wait_uevent_handler

[ Upstream commit 1eb013473bff5f95b6fe1ca4dd7deda47257b9c2 ]

Like other cases, it should use rcu protected 'chan' rather
than 'fence->channel' in nouveau_fence_wait_uevent_handler.

Fixes: 0ec5f02f0e2c ("drm/nouveau: prevent stale fence->channel pointers, and protect with rcu")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/gr/gk20a,gm200-: add terminators to method lists read from fw

[ Upstream commit 7adc77aa0e11f25b0e762859219c70852cd8d56f ]

Method init is typically ordered by class in the FW image as ThreeD,
TwoD, Compute.

Due to a bug in parsing the FW into our internal format, we've been
accidentally sending Twod + Compute methods to the ThreeD class, as
well as Compute methods to the TwoD class - oops.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/secboot/gm20b: initialize pointer in gm20b_secboot_new()

[ Upstream commit 3613a9bea95a1470dd42e4ed1cc7d86ebe0a2dc0 ]

We accidentally set "psb" which is a no-op instead of "*psb" so it
generates a static checker warning.  We should probably set it before
the first error return so that it's always initialized.

Fixes: 923f1bd27bf1 ("drm/nouveau/secboot/gm20b: add secure boot support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vme: bridges: reduce stack usage

[ Upstream commit 7483e7a939c074d887450ef1c4d9ccc5909405f8 ]

With CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3, the stack usage in vme_fake
grows above the warning limit:

drivers/vme/bridges/vme_fake.c: In function 'fake_master_read':
drivers/vme/bridges/vme_fake.c:610:1: error: the frame size of 1160 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
drivers/vme/bridges/vme_fake.c: In function 'fake_master_write':
drivers/vme/bridges/vme_fake.c:797:1: error: the frame size of 1160 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

The problem is that in some configurations, each call to
fake_vmereadX() puts another variable on the stack.

Reduce the amount of inlining to get back to the previous state,
with no function using more than 200 bytes each.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200107200610.3482901-1-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Return -EBADRQC for invalid map type in __bpf_tx_xdp_map

[ Upstream commit 0a29275b6300f39f78a87f2038bbfe5bdbaeca47 ]

A negative value should be returned if map->map_type is invalid
although that is impossible now, but if we run into such situation
in future, then xdpbuff could be leaked.

Daniel Borkmann suggested:

-EBADRQC should be returned to stay consistent with generic XDP
for the tracepoint output and not to be confused with -EOPNOTSUPP
from other locations like dev_map_enqueue() when ndo_xdp_xmit is
missing and such.

Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1578618277-18085-1-git-send-email-lirongqing@baidu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: Print device when resources present in really_probe()

[ Upstream commit 7c35e699c88bd60734277b26962783c60e04b494 ]

If a device already has devres items attached before probing, a warning
backtrace is printed.  However, this backtrace does not reveal the
offending device, leaving the user uninformed.  Furthermore, using
WARN_ON() causes systems with panic-on-warn to reboot.

Fix this by replacing the WARN_ON() by a dev_crit() message.
Abort probing the device, to prevent doing more damage to the device's
resources.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191206132219.28908-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: platform: Prevent resouce overflow from causing infinite loops

[ Upstream commit 39cc539f90d035a293240c9443af50be55ee81b8 ]

num_resources in the platform_device struct is declared as a u32.  The
for loops that iterate over num_resources use an int as the counter,
which can cause infinite loops on architectures with smaller ints.
Change the loop counters to u32.

Signed-off-by: Simon Schwartz <kern.simon@theschwartz.xyz>
Link: https://lore.kernel.org/r/2201ce63a2a171ffd2ed14e867875316efcf71db.camel@theschwartz.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

visorbus: fix uninitialized variable access

[ Upstream commit caf82f727e69b647f09d57a1fc56e69d22a5f483 ]

The setup_crash_devices_work_queue function only partially initializes
the message it sends to chipset_init, leading to undefined behavior:

drivers/visorbus/visorchipset.c: In function 'setup_crash_devices_work_queue':
drivers/visorbus/visorchipset.c:333:6: error: '((unsigned char*)&msg.hdr.flags)[0]' is used uninitialized in this function [-Werror=uninitialized]
  if (inmsg->hdr.flags.response_expected)

Set up the entire structure, zero-initializing the 'response_expected'
flag.

This was apparently found by the patch that added the -O3 build option
in Kconfig.

Fixes: 12e364b9f08a ("staging: visorchipset driver to provide registration and other services")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200107202950.782951-1-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: synclink_gt: Adjust indentation in several functions

[ Upstream commit 446e76873b5e4e70bdee5db2f2a894d5b4a7d081 ]

Clang warns:

../drivers/tty/synclink_gt.c:1337:3: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
        if (C_CRTSCTS(tty)) {
        ^
../drivers/tty/synclink_gt.c:1335:2: note: previous statement is here
        if (I_IXOFF(tty))
        ^
../drivers/tty/synclink_gt.c:2563:3: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
        if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
        ^
../drivers/tty/synclink_gt.c:2561:2: note: previous statement is here
        if (I_INPCK(info->port.tty))
        ^
../drivers/tty/synclink_gt.c:3221:3: warning: misleading indentation;
statement is not part of the previous 'else' [-Wmisleading-indentation]
        set_signals(info);
        ^
../drivers/tty/synclink_gt.c:3219:2: note: previous statement is here
        else
        ^
3 warnings generated.

The indentation on these lines is not at all consistent, tabs and spaces
are mixed together. Convert to just using tabs to be consistent with the
Linux kernel coding style and eliminate these warnings from clang.

Link: https://github.com/ClangBuiltLinux/linux/issues/822
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20191218023912.13827-1-natechancellor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: synclinkmp: Adjust indentation in several functions

[ Upstream commit 1feedf61e7265128244f6993f23421f33dd93dbc ]

Clang warns:

../drivers/tty/synclinkmp.c:1456:3: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
        if (C_CRTSCTS(tty)) {
        ^
../drivers/tty/synclinkmp.c:1453:2: note: previous statement is here
        if (I_IXOFF(tty))
        ^
../drivers/tty/synclinkmp.c:2473:8: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
                                                info->port.tty->hw_stopped = 0;
                                                ^
../drivers/tty/synclinkmp.c:2471:7: note: previous statement is here
                                                if ( debug_level >= DEBUG_LEVEL_ISR )
                                                ^
../drivers/tty/synclinkmp.c:2482:8: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
                                                info->port.tty->hw_stopped = 1;
                                                ^
../drivers/tty/synclinkmp.c:2480:7: note: previous statement is here
                                                if ( debug_level >= DEBUG_LEVEL_ISR )
                                                ^
../drivers/tty/synclinkmp.c:2809:3: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
        if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
        ^
../drivers/tty/synclinkmp.c:2807:2: note: previous statement is here
        if (I_INPCK(info->port.tty))
        ^
../drivers/tty/synclinkmp.c:3246:3: warning: misleading indentation;
statement is not part of the previous 'else' [-Wmisleading-indentation]
        set_signals(info);
        ^
../drivers/tty/synclinkmp.c:3244:2: note: previous statement is here
        else
        ^
5 warnings generated.

The indentation on these lines is not at all consistent, tabs and spaces
are mixed together. Convert to just using tabs to be consistent with the
Linux kernel coding style and eliminate these warnings from clang.

Link: https://github.com/ClangBuiltLinux/linux/issues/823
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20191218024720.3528-1-natechancellor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: atmel: fix build error with CONFIG_SND_ATMEL_SOC_DMA=m

[ Upstream commit 8fea78029f5e6ed734ae1957bef23cfda1af4354 ]

If CONFIG_SND_ATMEL_SOC_DMA=m, build error:

sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_set_audio':
(.text+0x7cd): undefined reference to `atmel_pcm_dma_platform_register'

Function atmel_pcm_dma_platform_register is defined under
CONFIG SND_ATMEL_SOC_DMA, so select SND_ATMEL_SOC_DMA in
CONFIG SND_ATMEL_SOC_SSC, same to CONFIG_SND_ATMEL_SOC_PDC.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Link: https://lore.kernel.org/r/20200113133242.144550-1-chenzhou10@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wan: ixp4xx_hss: fix compile-testing on 64-bit

[ Upstream commit 504c28c853ec5c626900b914b5833daf0581a344 ]

Change the driver to use portable integer types to avoid
warnings during compile testing:

drivers/net/wan/ixp4xx_hss.c:863:21: error: cast to 'u32 *' (aka 'unsigned int *') from smaller integer type 'int' [-Werror,-Wint-to-pointer-cast]
        memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
                           ^
drivers/net/wan/ixp4xx_hss.c:979:12: error: incompatible pointer types passing 'u32 *' (aka 'unsigned int *') to parameter of type 'dma_addr_t *' (aka 'unsigned long long *') [-Werror,-Wincompatible-pointer-types]
                                              &port->desc_tab_phys)))
                                              ^~~~~~~~~~~~~~~~~~~~
include/linux/dmapool.h:27:20: note: passing argument to parameter 'handle' here
                     dma_addr_t *handle);
                                 ^

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/nmi: Remove irq_work from the long duration NMI handler

[ Upstream commit 248ed51048c40d36728e70914e38bffd7821da57 ]

First, printk() is NMI-context safe now since the safe printk() has been
implemented and it already has an irq_work to make NMI-context safe.

Second, this NMI irq_work actually does not work if a NMI handler causes
panic by watchdog timeout. It has no chance to run in such case, while
the safe printk() will flush its per-cpu buffers before panicking.

While at it, repurpose the irq_work callback into a function which
concentrates the NMI duration checking and makes the code easier to
follow.

 [ bp: Massage. ]

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200111125427.15662-1-changbin.du@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: edt-ft5x06 - work around first register access error

[ Upstream commit e112324cc0422c046f1cf54c56f333d34fa20885 ]

The EP0700MLP1 returns bogus data on the first register read access
(reading the threshold parameter from register 0x00):

    edt_ft5x06 2-0038: crc error: 0xfc expected, got 0x40

It ignores writes until then. This patch adds a dummy read after which
the number of sensors and parameter read/writes work correctly.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu: Use WRITE_ONCE() for assignments to ->pprev for hlist_nulls

[ Upstream commit 860c8802ace14c646864795e057349c9fb2d60ad ]

Eric Dumazet supplied a KCSAN report of a bug that forces use
of hlist_unhashed_lockless() from sk_unhashed():

------------------------------------------------------------------------

BUG: KCSAN: data-race in inet_unhash / inet_unhash

write to 0xffff8880a69a0170 of 8 bytes by interrupt on cpu 1:
 __hlist_nulls_del include/linux/list_nulls.h:88 [inline]
 hlist_nulls_del_init_rcu include/linux/rculist_nulls.h:36 [inline]
 __sk_nulls_del_node_init_rcu include/net/sock.h:676 [inline]
 inet_unhash+0x38f/0x4a0 net/ipv4/inet_hashtables.c:612
 tcp_set_state+0xfa/0x3e0 net/ipv4/tcp.c:2249
 tcp_done+0x93/0x1e0 net/ipv4/tcp.c:3854
 tcp_write_err+0x7e/0xc0 net/ipv4/tcp_timer.c:56
 tcp_retransmit_timer+0x9b8/0x16d0 net/ipv4/tcp_timer.c:479
 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:599
 tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:619
 call_timer_fn+0x5f/0x2f0 kernel/time/timer.c:1404
 expire_timers kernel/time/timer.c:1449 [inline]
 __run_timers kernel/time/timer.c:1773 [inline]
 __run_timers kernel/time/timer.c:1740 [inline]
 run_timer_softirq+0xc0c/0xcd0 kernel/time/timer.c:1786
 __do_softirq+0x115/0x33f kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:373 [inline]
 irq_exit+0xbb/0xe0 kernel/softirq.c:413
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830
 native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71
 arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571
 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94
 cpuidle_idle_call kernel/sched/idle.c:154 [inline]
 do_idle+0x1af/0x280 kernel/sched/idle.c:263
 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355
 start_secondary+0x208/0x260 arch/x86/kernel/smpboot.c:264
 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241

read to 0xffff8880a69a0170 of 8 bytes by interrupt on cpu 0:
 sk_unhashed include/net/sock.h:607 [inline]
 inet_unhash+0x3d/0x4a0 net/ipv4/inet_hashtables.c:592
 tcp_set_state+0xfa/0x3e0 net/ipv4/tcp.c:2249
 tcp_done+0x93/0x1e0 net/ipv4/tcp.c:3854
 tcp_write_err+0x7e/0xc0 net/ipv4/tcp_timer.c:56
 tcp_retransmit_timer+0x9b8/0x16d0 net/ipv4/tcp_timer.c:479
 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:599
 tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:619
 call_timer_fn+0x5f/0x2f0 kernel/time/timer.c:1404
 expire_timers kernel/time/timer.c:1449 [inline]
 __run_timers kernel/time/timer.c:1773 [inline]
 __run_timers kernel/time/timer.c:1740 [inline]
 run_timer_softirq+0xc0c/0xcd0 kernel/time/timer.c:1786
 __do_softirq+0x115/0x33f kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:373 [inline]
 irq_exit+0xbb/0xe0 kernel/softirq.c:413
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830
 native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71
 arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571
 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94
 cpuidle_idle_call kernel/sched/idle.c:154 [inline]
 do_idle+0x1af/0x280 kernel/sched/idle.c:263
 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355
 rest_init+0xec/0xf6 init/main.c:452
 arch_call_rest_init+0x17/0x37
 start_kernel+0x838/0x85e init/main.c:786
 x86_64_start_reservations+0x29/0x2b arch/x86/kernel/head64.c:490
 x86_64_start_kernel+0x72/0x76 arch/x86/kernel/head64.c:471
 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc6+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 01/01/2011

------------------------------------------------------------------------

This commit therefore replaces C-language assignments with WRITE_ONCE()
in include/linux/list_nulls.h and include/linux/rculist_nulls.h.

Reported-by: Eric Dumazet <edumazet@google.com> # For KCSAN
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/x86: Don't panic or BUG() on non-critical error conditions

[ Upstream commit e2d68a955e49d61fd0384f23e92058dc9b79be5e ]

The logic in __efi_enter_virtual_mode() does a number of steps in
sequence, all of which may fail in one way or the other. In most
cases, we simply print an error and disable EFI runtime services
support, but in some cases, we BUG() or panic() and bring down the
system when encountering conditions that we could easily handle in
the same way.

While at it, replace a pointless page-to-virt-phys conversion with
one that goes straight from struct page to physical.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Matthew Garrett <mjg59@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20200103113953.9571-14-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc/tegra: fuse: Correct straps' address for older Tegra124 device trees

[ Upstream commit 2d9ea1934f8ef0dfb862d103389562cc28b4fc03 ]

Trying to read out Chip ID before APBMISC registers are mapped won't
succeed, in a result Tegra124 gets a wrong address for the HW straps
register if machine uses an old outdated device tree.

Fixes: 297c4f3dcbff ("soc/tegra: fuse: Restrict legacy code to 32-bit ARM")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Add software counter for ctxt0 seq drop

[ Upstream commit 5ffd048698ea5139743acd45e8ab388a683642b8 ]

All other code paths increment some form of drop counter.

This was missed in the original implementation.

Fixes: 82c2611daaf0 ("staging/rdma/hfi1: Handle packets with invalid RHF on context 0")
Link: https://lore.kernel.org/r/20200106134228.119356.96828.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8188: avoid excessive stack usage

[ Upstream commit c497ae2077c055b85c1bf04f3d182a84bd8f365b ]

The rtl8188 copy of the os_dep support code causes a
warning about a very significant stack usage in the translate_scan()
function:

drivers/staging/rtl8188eu/os_dep/ioctl_linux.c: In function 'translate_scan':
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:306:1: error: the frame size of 1560 bytes is larger than 1400 bytes [-Werror=frame-larger-than=]

Use the same trick as in the rtl8723bs copy of the same function, and
allocate it dynamically.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200104214832.558198-1-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udf: Fix free space reporting for metadata and virtual partitions

[ Upstream commit a4a8b99ec819ca60b49dc582a4287ef03411f117 ]

Free space on filesystems with metadata or virtual partition maps
currently gets misreported. This is because these partitions are just
remapped onto underlying real partitions from which keep track of free
blocks. Take this remapping into account when counting free blocks as
well.

Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usbip: Fix unsafe unaligned pointer usage

[ Upstream commit 585c91f40d201bc564d4e76b83c05b3b5363fe7e ]

Fix unsafe unaligned pointer usage in usbip network interfaces. usbip tool
build fails with new gcc -Werror=address-of-packed-member checks.

usbip_network.c: In function ‘usbip_net_pack_usb_device’:
usbip_network.c:79:32: error: taking address of packed member of ‘struct usbip_usb_device’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
   79 |  usbip_net_pack_uint32_t(pack, &udev->busnum);

Fix with minor changes to pass by value instead of by address.

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200109012416.2875-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-disco

[ Upstream commit 0ff15a86d0c5a3f004fee2e92d65b88e56a3bc58 ]

Add a fixed regulator and use it as power supply for DSI panel.

Fixes: 18c8866266 ("ARM: dts: stm32: Add display support on stm32f469-disco")

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: remove the newline for CRC source name.

[ Upstream commit 72a848f5c46bab4c921edc9cbffd1ab273b2be17 ]

userspace may transfer a newline, and this terminating newline
is replaced by a '\0' to avoid followup issues.

'len-1' is the index to replace the newline of CRC source name.

v3: typo fix (Sam)

v2: update patch subject, body and format. (Sam)

Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dingchen Zhang <dingchen.zhang@amd.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610134751.14356-1-dingchen.zhang@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlx5: work around high stack usage with gcc

[ Upstream commit 42ae1a5c76691928ed217c7e40269db27f5225e9 ]

In some configurations, gcc tries too hard to optimize this code:

drivers/net/ethernet/mellanox/mlx5/core/en_stats.c: In function 'mlx5e_grp_sw_update_stats':
drivers/net/ethernet/mellanox/mlx5/core/en_stats.c:302:1: error: the frame size of 1336 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

As was stated in the bug report, the reason is that gcc runs into a corner
case in the register allocator that is rather hard to fix in a good way.

As there is an easy way to work around it, just add a comment and the
barrier that stops gcc from trying to overoptimize the function.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92657
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: button: Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch

[ Upstream commit 0528904926aab19bffb2068879aa44db166c6d5f ]

Running evemu-record on the lid switch event shows that the lid reports
the first "close" but then never reports an "open".  This causes systemd
to continuously re-suspend the laptop every 30s.  Resetting the _LID to
"open" fixes the issue.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools lib api fs: Fix gcc9 stringop-truncation compilation error

[ Upstream commit 6794200fa3c9c3e6759dae099145f23e4310f4f7 ]

GCC9 introduced string hardening mechanisms, which exhibits the error
during fs api compilation:

error: '__builtin_strncpy' specified bound 4096 equals destination size
[-Werror=stringop-truncation]

This comes when the length of copy passed to strncpy is is equal to
destination size, which could potentially lead to buffer overflow.

There is a need to mitigate this potential issue by limiting the size of
destination by 1 and explicitly terminate the destination with NULL.

Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191211080109.18765-1-andrey.zhizhikin@leica-geosystems.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: sh: Fix compile warning wrt const

[ Upstream commit f1dd4795b1523fbca7ab4344dd5a8bb439cc770d ]

A long-standing compile warning was seen during build test:
  sound/sh/aica.c: In function 'load_aica_firmware':
  sound/sh/aica.c:521:25: warning: passing argument 2 of 'spu_memload' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]

Fixes: 198de43d758c ("[ALSA] Add ALSA support for the SEGA Dreamcast PCM device")
Link: https://lore.kernel.org/r/20200105144823.29547-69-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: uniphier: Add SCSSI clock gate for each channel

[ Upstream commit 1ec09a2ec67a0baa46a3ccac041dbcdbc6db2cb9 ]

SCSSI has clock gates for each channel in the SoCs newer than Pro4,
so this adds missing clock gates for channel 1, 2 and 3. And more, this
moves MCSSI clock ID after SCSSI.

Fixes: ff388ee36516 ("clk: uniphier: add clock frequency support for SPI")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lkml.kernel.org/r/1577410925-22021-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: sh: Fix unused variable warnings

[ Upstream commit 5da116f164ce265e397b8f59af5c39e4a61d61a5 ]

Remove unused variables that are left over after the conversion of new
PCM ops:
  sound/sh/sh_dac_audio.c:166:26: warning: unused variable 'runtime'
  sound/sh/sh_dac_audio.c:186:26: warning: unused variable 'runtime'
  sound/sh/sh_dac_audio.c:205:26: warning: unused variable 'runtime'

Fixes: 1cc2f8ba0b3e ("ALSA: sh: Convert to the new PCM ops")
Link: https://lore.kernel.org/r/20200104110057.13875-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock

[ Upstream commit ec97faff743b398e21f74a54c81333f3390093aa ]

The A64 PLL_CPU clock has the same instability if some factor changed
without the PLL gated like other SoCs with sun6i-style CCU, e.g. A33,
H3.

Add the mux and pll notifiers for A64 CPU clock to workaround the
problem.

Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Fix error type of mmap_offset

[ Upstream commit 6ca18d8927d468c763571f78c9a7387a69ffa020 ]

The type of mmap_offset should be u64 instead of int to match the type of
mminfo.offset. If otherwise, after we create several thousands of CQs, it
will run into overflow issues.

Link: https://lore.kernel.org/r/20191227113613.5020-1-kejiewei.cn@gmail.com
Signed-off-by: Jiewei Ke <kejiewei.cn@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

reset: uniphier: Add SCSSI reset control for each channel

[ Upstream commit f4aec227e985e31d2fdc5608daf48e3de19157b7 ]

SCSSI has reset controls for each channel in the SoCs newer than Pro4,
so this adds missing reset controls for channel 1, 2 and 3. And more, this
moves MCSSI reset ID after SCSSI.

Fixes: 6b39fd590aeb ("reset: uniphier: add reset control support for SPI")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs

[ Upstream commit 02aeb2f21530c98fc3ca51028eda742a3fafbd9f ]

pinmux_func_gpios[] contains a hole due to the missing function GPIO
definition for the "CTX0&CTX1" signal, which is the logical "AND" of the
first two CAN outputs.

A closer look reveals other issues:
  - Some functionality is available on alternative pins, but the
    PINMUX_DATA() entries is using the wrong marks,
  - Several configurations are missing.

Fix this by:
  - Renaming CTX0CTX1CTX2_MARK, CRX0CRX1_PJ22_MARK, and
    CRX0CRX1CRX2_PJ20_MARK to CTX0_CTX1_CTX2_MARK, CRX0_CRX1_PJ22_MARK,
    resp. CRX0_CRX1_CRX2_PJ20_MARK for consistency with the
    corresponding enum IDs,
  - Adding all missing enum IDs and marks,
  - Use the right (*_PJ2x) variants for alternative pins,
  - Adding all missing configurations to pinmux_data[],
  - Adding all missing function GPIO definitions to pinmux_func_gpios[].

See SH7268 Group, SH7269 Group User’s Manual: Hardware, Rev. 2.00:
  [1] Table 1.4 List of Pins
  [2] Figure 23.29 Connection Example when Using Channels 0 and 1 as One
      Channel (64 Mailboxes × 1 Channel) and Channel 2 as One Channel
      (32 Mailboxes × 1 Channel),
  [3] Figure 23.30 Connection Example when Using Channels 0, 1, and 2 as
      One Channel (96 Mailboxes × 1 Channel),
  [4] Table 48.3 Multiplexed Pins (Port B),
  [5] Table 48.4 Multiplexed Pins (Port C),
  [6] Table 48.10 Multiplexed Pins (Port J),
  [7] Section 48.2.4 Port B Control Registers 0 to 5 (PBCR0 to PBCR5).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191218194812.12741-5-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependency

[ Upstream commit eff5d31f7407fa9d31fb840106f1593399457298 ]

To build test, add COMPILE_TEST depedency to both ARM_RK3399_DMC_DEVFREQ
and DEVFREQ_EVENT_ROCKCHIP_DFI configuration. And ARM_RK3399_DMC_DEVFREQ
used the SMCCC interface so that add HAVE_ARM_SMCCC dependency to prevent
the build break.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/vdso: Provide missing include file

[ Upstream commit bff47c2302cc249bcd550b17067f8dddbd4b6f77 ]

When building with C=1, sparse issues a warning:

  CHECK   arch/x86/entry/vdso/vdso32-setup.c
  arch/x86/entry/vdso/vdso32-setup.c:28:28: warning: symbol 'vdso32_enabled' was not declared. Should it be static?

Provide the missing header file.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/36224.1575599767@turing-police
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: chtls - Fixed memory leak

[ Upstream commit 93e23eb2ed6c11b4f483c8111ac155ec2b1f3042 ]

Freed work request skbs when connection terminates.
enqueue_wr()/ dequeue_wr() is shared between softirq
and application contexts, should be protected by socket
lock. Moved dequeue_wr() to appropriate file.

Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: imx-sdma: Fix memory leak

[ Upstream commit 02939cd167095f16328a1bd5cab5a90b550606df ]

The current descriptor is not on any list of the virtual DMA channel.
Once sdma_terminate_all() is called when a descriptor is currently
in flight then this one is forgotten to be freed. We have to call
vchan_terminate_vdesc() on this descriptor to re-add it to the lists.
Now that we also free the currently running descriptor we can (and
actually have to) remove the current descriptor from its list also
for the cyclic case.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
Tested-by: Robin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/20191216105328.15198-10-s.hauer@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: Store module owner in dma_device struct

[ Upstream commit dae7a589c18a4d979d5f14b09374e871b995ceb1 ]

dma_chan_to_owner() dereferences the driver from the struct device to
obtain the owner and call module_[get|put](). However, if the backing
device is unbound before the dma_device is unregistered, the driver
will be cleared and this will cause a NULL pointer dereference.

Instead, store a pointer to the owner module in the dma_device struct
so the module reference can be properly put when the channel is put, even
if the backing device was destroyed first.

This change helps to support a safer unbind of DMA engines.
If the dma_device is unregistered in the driver's remove function,
there's no guarantee that there are no existing clients and a users
action may trigger the WARN_ONCE in dma_async_device_unregister()
which is unlikely to leave the system in a consistent state.
Instead, a better approach is to allow the backing driver to go away
and fail any subsequent requests to it.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20191216190120.21374-2-logang@deltatee.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selinux: ensure we cleanup the internal AVC counters on error in avc_update()

[ Upstream commit 030b995ad9ece9fa2d218af4429c1c78c2342096 ]

In AVC update we don't call avc_node_kill() when avc_xperms_populate()
fails, resulting in the avc->avc_cache.active_nodes counter having a
false value.  In last patch this changes was missed , so correcting it.

Fixes: fa1aa143ac4a ("selinux: extended permissions for ioctls")
Signed-off-by: Jaihind Yadav <jaihindyadav@codeaurora.org>
Signed-off-by: Ravi Kumar Siddojigari <rsiddoji@codeaurora.org>
[PM: merge fuzz, minor description cleanup]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: r8a7779: Add device node for ARM global timer

[ Upstream commit 8443ffd1bbd5be74e9b12db234746d12e8ea93e2 ]

Add a device node for the global timer, which is part of the Cortex-A9
MPCore.

The global timer can serve as an accurate (4 ns) clock source for
scheduling and delay loops.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191211135222.26770-4-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: handle events when enabling/disabling crtc

[ Upstream commit 411f5c1eacfebb1f6e40b653d29447cdfe7282aa ]

The driver currently handles vblank events only when updating planes on
an already enabled CRTC. The atomic update API however allows requesting
an event when enabling or disabling a CRTC. This currently leads to
event objects being leaked in the kernel and to events not being sent
out. Fix it.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: aic7xxx: Adjust indentation in ahc_find_syncrate

[ Upstream commit 4dbc96ad65c45cdd4e895ed7ae4c151b780790c5 ]

Clang warns:

../drivers/scsi/aic7xxx/aic7xxx_core.c:2317:5: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
                        if ((syncrate->sxfr_u2 & ST_SXFR) != 0)
                        ^
../drivers/scsi/aic7xxx/aic7xxx_core.c:2310:4: note: previous statement
is here
                        if (syncrate == &ahc_syncrates[maxsync])
                        ^
1 warning generated.

This warning occurs because there is a space amongst the tabs on this
line. Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.

This has been a problem since the beginning of git history hence no fixes
tag.

Link: https://github.com/ClangBuiltLinux/linux/issues/817
Link: https://lore.kernel.org/r/20191218014220.52746-1-natechancellor@gmail.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Complete pending requests in host reset and restore path

[ Upstream commit 2df74b6985b51e77756e2e8faa16c45ca3ba53c5 ]

In UFS host reset and restore path, before probe, we stop and start the
host controller once. After host controller is stopped, the pending
requests, if any, are cleared from the doorbell, but no completion IRQ
would be raised due to the hba is stopped.  These pending requests shall be
completed along with the first NOP_OUT command (as it is the first command
which can raise a transfer completion IRQ) sent during probe.  Since the
OCSs of these pending requests are not SUCCESS (because they are not yet
literally finished), their UPIUs shall be dumped. When there are multiple
pending requests, the UPIU dump can be overwhelming and may lead to
stability issues because it is in atomic context.  Therefore, before probe,
complete these pending requests right after host controller is stopped and
silence the UPIU dump from them.

Link: https://lore.kernel.org/r/1574751214-8321-5-git-send-email-cang@qti.qualcomm.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1

[ Upstream commit 5ddbd77181dfca61b16d2e2222382ea65637f1b9 ]

ACPICA commit 29cc8dbc5463a93625bed87d7550a8bed8913bf4

create_buffer_field is a deferred op that is typically processed in
load pass 2. However, disassembly of control method contents walk the
parse tree with ACPI_PARSE_LOAD_PASS1 and AML_CREATE operators are
processed in a later walk. This is a problem when there is a control
method that has the same name as the AML_CREATE object. In this case,
any use of the name segment will be detected as a method call rather
than a reference to a buffer field. If this is detected as a method
call, it can result in a mal-formed parse tree if the control methods
have parameters.

This change in processing AML_CREATE ops earlier solves this issue by
inserting the named object in the ACPI namespace so that references
to this name would be detected as a name string rather than a method
call.

Link: https://github.com/acpica/acpica/commit/29cc8dbc
Reported-by: Elia Geretto <elia.f.geretto@gmail.com>
Tested-by: Elia Geretto <elia.f.geretto@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

orinoco: avoid assertion in case of NULL pointer

[ Upstream commit c705f9fc6a1736dcf6ec01f8206707c108dca824 ]

In ezusb_init, if upriv is NULL, the code crashes. However, the caller
in ezusb_probe can handle the error and print the failure message.
The patch replaces the BUG_ON call to error return.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtlwifi: rtl_pci: Fix -Wcast-function-type

[ Upstream commit cb775c88da5d48a85d99d95219f637b6fad2e0e9 ]

correct usage prototype of callback in tasklet_init().
Report by https://github.com/KSPP/linux/issues/20

Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlegacy: Fix -Wcast-function-type

[ Upstream commit da5e57e8a6a3e69dac2937ba63fa86355628fbb2 ]

correct usage prototype of callback in tasklet_init().
Report by https://github.com/KSPP/linux/issues/20

Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipw2x00: Fix -Wcast-function-type

[ Upstream commit ebd77feb27e91bb5fe35a7818b7c13ea7435fb98 ]

correct usage prototype of callback in tasklet_init().
Report by https://github.com/KSPP/linux/issues/20

Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

b43legacy: Fix -Wcast-function-type

[ Upstream commit 475eec112e4267232d10f4afe2f939a241692b6c ]

correct usage prototype of callback in tasklet_init().
Report by https://github.com/KSPP/linux/issues/20

Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usx2y: Adjust indentation in snd_usX2Y_hwdep_dsp_status

[ Upstream commit df4654bd6e42125d9b85ce3a26eaca2935290b98 ]

Clang warns:

../sound/usb/usx2y/usX2Yhwdep.c:122:3: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
        info->version = USX2Y_DRIVER_VERSION;
        ^
../sound/usb/usx2y/usX2Yhwdep.c:120:2: note: previous statement is here
        if (us428->chip_status & USX2Y_STAT_CHIP_INIT)
        ^
1 warning generated.

This warning occurs because there is a space before the tab on this
line. Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.

This was introduced before the beginning of git history so no fixes tag.

Link: https://github.com/ClangBuiltLinux/linux/issues/831
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20191218034257.54535-1-natechancellor@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_tunnel: add the missing ERSPAN_VERSION nla_policy

[ Upstream commit 0705f95c332081036d85f26691e9d3cd7d901c31 ]

ERSPAN_VERSION is an attribute parsed in kernel side, nla_policy
type should be added for it, like other attributes.

Fixes: af308b94a2a4 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fore200e: Fix incorrect checks of NULL pointer dereference

[ Upstream commit bbd20c939c8aa3f27fa30e86691af250bf92973a ]

In fore200e_send and fore200e_close, the pointers from the arguments
are dereferenced in the variable declaration block and then checked
for NULL. The patch fixes these issues by avoiding NULL pointer
dereferences.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8169: check that Realtek PHY driver module is loaded

[ Upstream commit f325937735498afb054a0195291bbf68d0b60be5 ]

Some users complained about problems with r8169 and it turned out that
the generic PHY driver was used instead instead of the dedicated one.
In all cases reason was that r8169.ko was in initramfs, but realtek.ko
not. Manually adding realtek.ko to initramfs fixed the issues.
Root cause seems to be that tools like dracut and genkernel don't
consider softdeps. Add a check for loaded Realtek PHY driver module
and provide the user with a hint if it's not loaded.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

reiserfs: Fix spurious unlock in reiserfs_fill_super() error handling

[ Upstream commit 4d5c1adaf893b8aa52525d2b81995e949bcb3239 ]

When we fail to allocate string for journal device name we jump to
'error' label which tries to unlock reiserfs write lock which is not
held. Jump to 'error_unlocked' instead.

Fixes: f32485be8397 ("reiserfs: delay reiserfs lock until journal initialization")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: v4l2-device.h: Explicitly compare grp{id,mask} to zero in v4l2_device macros

[ Upstream commit afb34781620274236bd9fc9246e22f6963ef5262 ]

When building with Clang + -Wtautological-constant-compare, several of
the ivtv and cx18 drivers warn along the lines of:

 drivers/media/pci/cx18/cx18-driver.c:1005:21: warning: converting the
 result of '<<' to a boolean always evaluates to true
 [-Wtautological-constant-compare]
                         cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL,
                                         ^
 drivers/media/pci/cx18/cx18-cards.h:18:37: note: expanded from macro
 'CX18_HW_GPIO_RESET_CTRL'
 #define CX18_HW_GPIO_RESET_CTRL         (1 << 6)
                                           ^
 1 warning generated.

This warning happens because the shift operation is implicitly converted
to a boolean in v4l2_device_mask_call_all before being negated. This can
be solved by just comparing the mask result to 0 explicitly so that
there is no boolean conversion. The ultimate goal is to enable
-Wtautological-compare globally because there are several subwarnings
that would be helpful to have.

For visual consistency and avoidance of these warnings in the future,
all of the implicitly boolean conversions in the v4l2_device macros
are converted to explicit ones as well.

Link: https://github.com/ClangBuiltLinux/linux/issues/752
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Increase D3 delay for AMD Ryzen5/7 XHCI controllers

[ Upstream commit 3030df209aa8cf831b9963829bd9f94900ee8032 ]

On Asus UX434DA (AMD Ryzen7 3700U) and Asus X512DK (AMD Ryzen5 3500U), the
XHCI controller fails to resume from runtime suspend or s2idle, and USB
becomes unusable from that point.

  xhci_hcd 0000:03:00.4: Refused to change power state, currently in D3
  xhci_hcd 0000:03:00.4: enabling device (0000 -> 0002)
  xhci_hcd 0000:03:00.4: WARN: xHC restore state timeout
  xhci_hcd 0000:03:00.4: PCI post-resume error -110!
  xhci_hcd 0000:03:00.4: HC died; cleaning up

During suspend, a transition to D3cold is attempted, however the affected
platforms do not seem to cut the power to the PCI device when in this
state, so the device stays in D3hot.

Upon resume, the D3hot-to-D0 transition is successful only if the D3 delay
is increased to 20ms. The transition failure does not appear to be
detectable as a CRS condition. Add a PCI quirk to increase the delay on the
affected hardware.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=205587
Link: http://lkml.kernel.org/r/CAD8Lp47Vh69gQjROYG69=waJgL7hs1PwnLonL9+27S_TcRhixA@mail.gmail.com
Link: https://lore.kernel.org/r/20191127053836.31624-2-drake@endlessm.com
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Add generic quirk for increasing D3hot delay

[ Upstream commit 62fe23df067715a21c4aef44068efe7ceaa8f627 ]

Separate the D3 delay increase functionality out of quirk_radeon_pm() into
its own function so that it can be shared with other quirks, including the
AMD Ryzen XHCI quirk that will be introduced in a followup commit.

Tweak the function name and message to indicate more clearly that the delay
relates to a D3hot-to-D0 transition.

Link: https://lore.kernel.org/r/20191127053836.31624-1-drake@endlessm.com
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cx23885: Add support for AVerMedia CE310B

[ Upstream commit dc4cac67e13515835ed8081d510aa507aacb013b ]

The AVerMedia CE310B is a simple composite + S-Video + stereo audio
capture card, and uses only the CX23888 to perform all of these
functions.

I've tested both video inputs and the audio interface and confirmed that
they're all working. However, there are some issues:

* Sometimes when I switch inputs the video signal turns black and can't
  be recovered until the system is rebooted. I haven't been able to
  determine the cause of this behavior, nor have I found a solution to
  fix it or any workarounds other than rebooting.
* The card sometimes seems to have trouble syncing to the video signal,
  and some of the VBI data appears as noise at the top of the frame, but
  I assume that to be a result of my very noisy RF environment and the
  card's unshielded input traces rather than a configuration issue.

Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: iproc: Apply quirk_paxc_bridge() for module as well as built-in

[ Upstream commit 574f29036fce385e28617547955dd6911d375025 ]

Previously quirk_paxc_bridge() was applied when the iproc driver was
built-in, but not when it was compiled as a module.

This happened because it was under #ifdef CONFIG_PCIE_IPROC_PLATFORM:
PCIE_IPROC_PLATFORM=y causes CONFIG_PCIE_IPROC_PLATFORM to be defined, but
PCIE_IPROC_PLATFORM=m causes CONFIG_PCIE_IPROC_PLATFORM_MODULE to be
defined.

Move quirk_paxc_bridge() to pcie-iproc.c and drop the #ifdef so the quirk
is always applied, whether iproc is built-in or a module.

[bhelgaas: commit log, move to pcie-iproc.c, not pcie-iproc-platform.c]
Link: https://lore.kernel.org/r/20191211174511.89713-1-wei.liu@kernel.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed

[ Upstream commit 6bb1e09c4c375db29770444f689f35f5cbe696bc ]

Cabling used to connect devices to USBH1 on RDU2 does not meet USB
spec cable quality and cable length requirements to operate at High
Speed, so limit the port to Full Speed only.

Reported-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3

[ Upstream commit cd58a174e58649426fb43d7456e5f7d7eab58af1 ]

RDU2 production units come with resistor connecting WP pin to
correpsonding GPIO DNPed for both SD card slots. Drop any WP related
configuration and mark both slots with "disable-wp".

Reported-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core

[ Upstream commit d026c96b25b7ce5df89526aad2df988d553edb4d ]

QUSB2 PHY on msm8996 doesn't work well when autosuspend by
dwc3 core using USB2PHYCFG register is enabled. One of the
issue seen is that PHY driver reports PLL lock failure and
fails phy_init() if dwc3 core has USB2 PHY suspend enabled.
Fix this by using quirks to disable USB2 PHY LPM/suspend and
dwc3 core already takes care of explicitly suspending PHY
during suspend if quirks are specified.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Link: https://lore.kernel.org/r/20191209151501.26993-1-p.pisati@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selinux: ensure we cleanup the internal AVC counters on error in avc_insert()

[ Upstream commit d8db60cb23e49a92cf8cada3297395c7fa50fdf8 ]

Fix avc_insert() to call avc_node_kill() if we've already allocated
an AVC node and the code fails to insert the node in the cache.

Fixes: fa1aa143ac4a ("selinux: extended permissions for ioctls")
Reported-by: rsiddoji@codeaurora.org
Suggested-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm: dts: allwinner: H3: Add PMU node

[ Upstream commit 0388a110747bec0c9d9de995842bb2a03a26aae1 ]

Add the Performance Monitoring Unit (PMU) device tree node to the H3
.dtsi, which tells DT users which interrupts are triggered by PMU
overflow events on each core. The numbers come from the manual and have
been checked in U-Boot and with perf in Linux.

Tested with perf record and taskset on an OrangePi Zero.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: H6: Add PMU mode

[ Upstream commit 7aa9b9eb7d6a8fde7acbe0446444f7e3fae1fe3b ]

Add the Performance Monitoring Unit (PMU) device tree node to the H6
.dtsi, which tells DT users which interrupts are triggered by PMU
overflow events on each core. The numbers come from the manual and have
been checked in U-Boot and with perf in Linux.

Tested with perf record and taskset on a Pine H64.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selinux: fall back to ref-walk if audit is required

[ Upstream commit 0188d5c025ca8fe756ba3193bd7d150139af5a88 ]

commit bda0be7ad994 ("security: make inode_follow_link RCU-walk aware")
passed down the rcu flag to the SELinux AVC, but failed to adjust the
test in slow_avc_audit() to also return -ECHILD on LSM_AUDIT_DATA_DENTRY.
Previously, we only returned -ECHILD if generating an audit record with
LSM_AUDIT_DATA_INODE since this was only relevant from inode_permission.
Move the handling of MAY_NOT_BLOCK to avc_audit() and its inlined
equivalent in selinux_inode_permission() immediately after we determine
that audit is required, and always fall back to ref-walk in this case.

Fixes: bda0be7ad994 ("security: make inode_follow_link RCU-walk aware")
Reported-by: Will Deacon <will@kernel.org>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFC: port100: Convert cpu_to_le16(le16_to_cpu(E1) + E2) to use le16_add_cpu().

[ Upstream commit 718eae277e62a26e5862eb72a830b5e0fe37b04a ]

Convert cpu_to_le16(le16_to_cpu(frame->datalen) + len) to
use le16_add_cpu(), which is more concise and does the same thing.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/wan/fsl_ucc_hdlc: reject muram offsets above 64K

[ Upstream commit 148587a59f6b85831695e0497d9dd1af5f0495af ]

Qiang Zhao points out that these offsets get written to 16-bit
registers, and there are some QE platforms with more than 64K
muram. So it is possible that qe_muram_alloc() gives us an allocation
that can't actually be used by the hardware, so detect and reject
that.

Reported-by: Qiang Zhao <qiang.zhao@nxp.com>
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: rk808: Lower log level on optional GPIOs being not available

[ Upstream commit b8a039d37792067c1a380dc710361905724b9b2f ]

RK808 can leverage a couple of GPIOs to tweak the ramp rate during DVS
(Dynamic Voltage Scaling). These GPIOs are entirely optional but a
dev_warn() appeared when cleaning this driver to use a more up-to-date
gpiod API. At least reduce the log level to 'info' as it is totally
fine to not populate these GPIO on a hardware design.

This change is trivial but it is worth not polluting the logs during
bringup phase by having real warnings and errors sorted out
correctly.

Fixes: a13eaf02e2d6 ("regulator: rk808: make better use of the gpiod API")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20191203164709.11127-1-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Ensure ret is always initialized when using SOC15_WAIT_ON_RREG

[ Upstream commit a63141e31764f8daf3f29e8e2d450dcf9199d1c8 ]

Commit b0f3cd3191cd ("drm/amdgpu: remove unnecessary JPEG2.0 code from
VCN2.0") introduced a new clang warning in the vcn_v2_0_stop function:

../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1082:2: warning: variable 'r'
is used uninitialized whenever 'while' loop exits because its condition
is false [-Wsometimes-uninitialized]
        SOC15_WAIT_ON_RREG(VCN, 0, mmUVD_STATUS, UVD_STATUS__IDLE, 0x7, r);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/amd/amdgpu/../amdgpu/soc15_common.h:55:10: note:
expanded from macro 'SOC15_WAIT_ON_RREG'
                while ((tmp_ & (mask)) != (expected_value)) {   \
                       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1083:6: note: uninitialized use
occurs here
        if (r)
            ^
../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1082:2: note: remove the
condition if it is always true
        SOC15_WAIT_ON_RREG(VCN, 0, mmUVD_STATUS, UVD_STATUS__IDLE, 0x7, r);
        ^
../drivers/gpu/drm/amd/amdgpu/../amdgpu/soc15_common.h:55:10: note:
expanded from macro 'SOC15_WAIT_ON_RREG'
                while ((tmp_ & (mask)) != (expected_value)) {   \
                       ^
../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1072:7: note: initialize the
variable 'r' to silence this warning
        int r;
             ^
              = 0
1 warning generated.

To prevent warnings like this from happening in the future, make the
SOC15_WAIT_ON_RREG macro initialize its ret variable before the while
loop that can time out. This macro's return value is always checked so
it should set ret in both the success and fail path.

Link: https://github.com/ClangBuiltLinux/linux/issues/776
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: remove 4 set but not used variable in amdgpu_atombios_get_connector_info_from_object_table

[ Upstream commit bae028e3e521e8cb8caf2cc16a455ce4c55f2332 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c: In function
'amdgpu_atombios_get_connector_info_from_object_table':
drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:376:26: warning: variable
'grph_obj_num' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:376:13: warning: variable
'grph_obj_id' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:341:37: warning: variable
'con_obj_type' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:341:24: warning: variable
'con_obj_num' set but not used [-Wunused-but-set-variable]

They are never used, so can be removed.

Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: rcg2: Don't crash if our parent can't be found; return an error

[ Upstream commit 908b050114d8fefdddc57ec9fbc213c3690e7f5f ]

When I got my clock parenting slightly wrong I ended up with a crash
that looked like this:

  Unable to handle kernel NULL pointer dereference at virtual
  address 0000000000000000
  ...
  pc : clk_hw_get_rate+0x14/0x44
  ...
  Call trace:
   clk_hw_get_rate+0x14/0x44
   _freq_tbl_determine_rate+0x94/0xfc
   clk_rcg2_determine_rate+0x2c/0x38
   clk_core_determine_round_nolock+0x4c/0x88
   clk_core_round_rate_nolock+0x6c/0xa8
   clk_core_round_rate_nolock+0x9c/0xa8
   clk_core_set_rate_nolock+0x70/0x180
   clk_set_rate+0x3c/0x6c
   of_clk_set_defaults+0x254/0x360
   platform_drv_probe+0x28/0xb0
   really_probe+0x120/0x2dc
   driver_probe_device+0x64/0xfc
   device_driver_attach+0x4c/0x6c
   __driver_attach+0xac/0xc0
   bus_for_each_dev+0x84/0xcc
   driver_attach+0x2c/0x38
   bus_add_driver+0xfc/0x1d0
   driver_register+0x64/0xf8
   __platform_driver_register+0x4c/0x58
   msm_drm_register+0x5c/0x60
   ...

It turned out that clk_hw_get_parent_by_index() was returning NULL and
we weren't checking.  Let's check it so that we don't crash.

Fixes: ac269395cdd8 ("clk: qcom: Convert to clk_hw based provider APIs")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lkml.kernel.org/r/20200203103049.v4.1.I7487325fe8e701a68a07d3be8a6a4b571eca9cfa@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kconfig: fix broken dependency in randconfig-generated .config

[ Upstream commit c8fb7d7e48d11520ad24808cfce7afb7b9c9f798 ]

Running randconfig on arm64 using KCONFIG_SEED=0x40C5E904 (e.g. on v5.5)
produces the .config with CONFIG_EFI=y and CONFIG_CPU_BIG_ENDIAN=y,
which does not meet the !CONFIG_CPU_BIG_ENDIAN dependency.

This is because the user choice for CONFIG_CPU_LITTLE_ENDIAN vs
CONFIG_CPU_BIG_ENDIAN is set by randomize_choice_values() after the
value of CONFIG_EFI is calculated.

When this happens, the has_changed flag should be set.

Currently, it takes the result from the last iteration. It should
accumulate all the results of the loop.

Fixes: 3b9a19e08960 ("kconfig: loop as long as we changed some symbols in randconfig")
Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: s390: ENOTSUPP -> EOPNOTSUPP fixups

[ Upstream commit c611990844c28c61ca4b35ff69d3a2ae95ccd486 ]

There is no ENOTSUPP for userspace.

Reported-by: Julian Wiedmann <jwi@linux.ibm.com>
Fixes: 519783935451 ("KVM: s390: introduce ais mode modify function")
Fixes: 2c1a48f2e5ed ("KVM: S390: add new group for flic")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: add a flush_workqueue in nbd_start_device

[ Upstream commit 5c0dd228b5fc30a3b732c7ae2657e0161ec7ed80 ]

When kzalloc fail, may cause trying to destroy the
workqueue from inside the workqueue.

If num_connections is m (2 < m), and NO.1 ~ NO.n
(1 < n < m) kzalloc are successful. The NO.(n + 1)
failed. Then, nbd_start_device will return ENOMEM
to nbd_start_device_ioctl, and nbd_start_device_ioctl
will return immediately without running flush_workqueue.
However, we still have n recv threads. If nbd_release
run first, recv threads may have to drop the last
config_refs and try to destroy the workqueue from
inside the workqueue.

To fix it, add a flush_workqueue in nbd_start_device.

Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs")
Signed-off-by: Sun Ke <sunke32@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Retrain dongles when SINK_COUNT becomes non-zero

[ Upstream commit 3eb6d7aca53d81ce888624f09cd44dc0302161e8 ]

[WHY]
Two years ago the patch referenced by the Fixes tag stopped running
dp_verify_link_cap_with_retries during DP detection when the reason
for the detection was a short-pulse interrupt. This effectively meant
that we were no longer doing the verify_link_cap training on active
dongles when their SINK_COUNT changed from 0 to 1.

A year ago this was partly remedied with:
commit 80adaebd2d41 ("drm/amd/display: Don't skip link training for empty dongle")

This made sure that we trained the dongle on initial hotplug (without
connected downstream devices).

This is all fine and dandy if it weren't for the fact that there are
some dongles on the market that don't like link training when SINK_COUNT
is 0 These dongles will in fact indicate a SINK_COUNT of 0 immediately
after hotplug, even when a downstream device is connected, and then
trigger a shortpulse interrupt indicating a SINK_COUNT change to 1.

In order to play nicely we will need our policy to not link train an
active DP dongle when SINK_COUNT is 0 but ensure we train it when the
SINK_COUNT changes to 1.

[HOW]
Call dp_verify_link_cap_with_retries on detection even when the detection
is triggered from a short pulse interrupt.

With this change we can also revert this commit which we'll do in a separate
follow-up change:
commit 80adaebd2d41 ("drm/amd/display: Don't skip link training for empty dongle")

Fixes: 0301ccbaf67d ("drm/amd/display: DP Compliance 400.1.1 failure")
Suggested-by: Louis Li <Ching-shih.Li@amd.com>
Tested-by: Louis Li <Ching-shih.Li@amd.com>
Cc: Wenjing Liu <Wenjing.Liu@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: Correct the DMA direction for management tx buffers

[ Upstream commit 6ba8b3b6bd772f575f7736c8fd893c6981fcce16 ]

The management packets, send to firmware via WMI, are
mapped using the direction DMA_TO_DEVICE. Currently in
case of wmi cleanup, these buffers are being unmapped
using an incorrect DMA direction. This can cause unwanted
behavior when the host driver is handling a restart
of the wlan firmware.

We might see a trace like below

[<ffffff8008098b18>] __dma_inv_area+0x28/0x58
[<ffffff8001176734>] ath10k_wmi_mgmt_tx_clean_up_pending+0x60/0xb0 [ath10k_core]
[<ffffff80088c7c50>] idr_for_each+0x78/0xe4
[<ffffff80011766a4>] ath10k_wmi_detach+0x4c/0x7c [ath10k_core]
[<ffffff8001163d7c>] ath10k_core_stop+0x58/0x68 [ath10k_core]
[<ffffff800114fb74>] ath10k_halt+0xec/0x13c [ath10k_core]
[<ffffff8001165110>] ath10k_core_restart+0x11c/0x1a8 [ath10k_core]
[<ffffff80080c36bc>] process_one_work+0x16c/0x31c

Fix the incorrect DMA direction during the wmi
management tx buffer cleanup.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes: dc405152bb6 ("ath10k: handle mgmt tx completion event")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4, jbd2: ensure panic when aborting with zero errno

[ Upstream commit 51f57b01e4a3c7d7bdceffd84de35144e8c538e7 ]

JBD2_REC_ERR flag used to indicate the errno has been updated when jbd2
aborted, and then __ext4_abort() and ext4_handle_error() can invoke
panic if ERRORS_PANIC is specified. But if the journal has been aborted
with zero errno, jbd2_journal_abort() didn't set this flag so we can
no longer panic. Fix this by always record the proper errno in the
journal superblock.

Fixes: 4327ba52afd03 ("ext4, jbd2: ensure entering into panic after recording an error in superblock")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8952/1: Disable kmemleak on XIP kernels

[ Upstream commit bc420c6ceefbb86cbbc8c00061bd779c17fa6997 ]

Kmemleak relies on specific symbols to register the read only data
during init (e.g. __start_ro_after_init).
Trying to build an XIP kernel on arm results in the linking error
reported below because when this option is selected read only data
after init are not allowed since .data is read only (.rodata).

  arm-linux-gnueabihf-ld: mm/kmemleak.o: in function `kmemleak_init':
  kmemleak.c:(.init.text+0x148): undefined reference to `__end_ro_after_init'
  arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x14c):
     undefined reference to `__end_ro_after_init'
  arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x150):
     undefined reference to `__start_ro_after_init'
  arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x156):
     undefined reference to `__start_ro_after_init'
  arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x162):
     undefined reference to `__start_ro_after_init'
  arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x16a):
     undefined reference to `__start_ro_after_init'
  linux/Makefile:1078: recipe for target 'vmlinux' failed

Fix the issue enabling kmemleak only on non XIP kernels.

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>