drm: rockchip: remove struct rockchip_crtc_funcs

With the vblank hooks in struct drm_crtc_funcs, we do not need to
maintain struct rockchip_crtc_funcs and the related registration
functions.  Remove them.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-18-git-send-email-shawnguo@kernel.org

drm: rcar-du: use vblank hooks in struct drm_crtc_funcs

The vblank hooks in struct drm_driver are deprecated and only meant for
legacy drivers.  For modern drivers with DRIVER_MODESET flag, the hooks
in struct drm_crtc_funcs should be used instead.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-17-git-send-email-shawnguo@kernel.org

drm: meson: use vblank hooks in struct drm_crtc_funcs

The vblank hooks in struct drm_driver are deprecated and only meant for
legacy drivers.  For modern drivers with DRIVER_MODESET flag, the hooks
in struct drm_crtc_funcs should be used instead.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-15-git-send-email-shawnguo@kernel.org

drm: imx: remove struct imx_drm_crtc and imx_drm_crtc_helper_funcs

With the vblank hooks in struct drm_crtc_funcs, we do not need to
maintain the CRTC specific vblank callbacks with struct
imx_drm_crtc_helper_funcs any more.  By moving the stuff that we
currently do in imx_drm_add_crtc(), like of_node setting and
drm_crtc_helper_add()/drm_crtc_init_with_planes() invoking, we can kill
things like struct imx_drm_crtc, imx_drm_crtc_helper_funcs and related
functions completely.

Functions ipu_enable_vblank() and ipu_disable_vblank() are moved around
without changes, only for saving the forward declarations.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-13-git-send-email-shawnguo@kernel.org

drm: hibmc: use vblank hooks in struct drm_crtc_funcs

The vblank hooks in struct drm_driver are deprecated and only meant for
legacy drivers.  For modern drivers with DRIVER_MODESET flag, the hooks
in struct drm_crtc_funcs should be used instead.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-11-git-send-email-shawnguo@kernel.org

drm/omap: use vblank hooks in struct drm_crtc_funcs

The vblank hooks in struct drm_driver are deprecated and only meant for
legacy drivers.  For modern drivers with DRIVER_MODESET flag, the hooks
in struct drm_crtc_funcs should be used instead.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/edid: Don't print an error if the checksum of a CEA block is wrong

It's common to share screens within CI labs, and it's also common for
KVM switches to alter the contents of the CEA block but leave the
checksum outdated.

So in this case, print a debug message instead of an error.

References: https://bugs.freedesktop.org/show_bug.cgi?id=98228
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Jari Tahvanainen <jari.tahvanainen@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481202716-31317-1-git-send-email-tomeu.vizoso@collabora.com

drm: fsl-dcu: use vblank hooks in struct drm_crtc_funcs

The vblank hooks in struct drm_driver are deprecated and only meant for
legacy drivers.  For modern drivers with DRIVER_MODESET flag, the hooks
in struct drm_crtc_funcs should be used instead.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Stefan Agner <stefan@agner.ch>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-10-git-send-email-shawnguo@kernel.org

drm/vc4: simplify exit path of a failed allocation of dsi_connector

If dsi_connector fails to allocate, the exit path via label 'fail'
checks if connector is null, which it always is, so the cleanup
that destroys connector is never going to be called.  Hence the
failure path can be more optimally performed by removing this
and just returning ERR_PTR(-ENOMEM).  This also removes the need
to initialize connector to NULL, and we can also remove ret too.

Detected by CoverityScan, CID#1399504 ("Logicall Dead Code")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170203195624.7189-1-colin.king@canonical.com

drm: exynos: use vblank hooks in struct drm_crtc_funcs

The vblank hooks in struct drm_driver are deprecated and only meant for
legacy drivers.  For modern drivers with DRIVER_MODESET flag, the hooks
in struct drm_crtc_funcs should be used instead.

As the result, exynos_drm_crtc_enable[disable]_vblank() become static
functions.  They are moved around a bit to save forward declaration
though.  Also while at it, we move one step further to kill
exynos_drm_crtc_from_pipe() completely by updating hdmi_bind() a bit.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-9-git-send-email-shawnguo@kernel.org

drm: atmel: use vblank hooks in struct drm_crtc_funcs

The vblank hooks in struct drm_driver are deprecated and only meant for
legacy drivers.  For modern drivers with DRIVER_MODESET flag, the hooks
in struct drm_crtc_funcs should be used instead.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-8-git-send-email-shawnguo@kernel.org

drm: armada: use vblank hooks in struct drm_crtc_funcs

The vblank hooks in struct drm_driver are deprecated and only meant for
legacy drivers.  For modern drivers with DRIVER_MODESET flag, the hooks
in struct drm_crtc_funcs should be used instead.  As the result,
functions armada_drm_crtc_enable[disable]_irq() can be static, although
they are moved around a bit to save forward declaration.

The armada_crtc pointer array in struct armada_private is still kept in
there, because armada_debugfs.c still have reference to it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Russell King <linux@armlinux.org.uk>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-7-git-send-email-shawnguo@kernel.org

drm: malidp: use vblank hooks in struct drm_crtc_funcs

The vblank hooks in struct drm_driver are deprecated and only meant for
legacy drivers.  For modern drivers with DRIVER_MODESET flag, the hooks
in struct drm_crtc_funcs should be used instead.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-6-git-send-email-shawnguo@kernel.org

drm: hdlcd: use vblank hooks in struct drm_crtc_funcs

The vblank hooks in struct drm_driver are deprecated and only meant for
legacy drivers.  For modern drivers with DRIVER_MODESET flag, the hooks
in struct drm_crtc_funcs should be used instead.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-5-git-send-email-shawnguo@kernel.org

drm: unexport function drm_vblank_no_hw_counter()

The function drm_vblank_no_hw_counter() is now only used in core vblank
wrapper code.  Let's unexport it by making it a static function.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-4-git-send-email-shawnguo@kernel.org

drm: remove drm_vblank_no_hw_counter assignment from driver code

Core code already makes drm_driver.get_vblank_counter hook optional by
letting drm_vblank_no_hw_counter be the default implementation for the
function hook.  So the drm_vblank_no_hw_counter assignment in the driver
code becomes redundant and can be removed now.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Eric Anholt <eric@anholt.net>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-3-git-send-email-shawnguo@kernel.org

drm: add vblank hooks to struct drm_crtc_funcs

The vblank is mostly CRTC specific and implemented as part of CRTC
driver.  Let's keep the vblank hooks struct drm_driver for legacy
drivers, and add corresponding hooks in struct drm_crtc_funcs.  These
hooks take struct drm_crtc pointer as argument, and will be called by
core vblank handling code for DRIVER_MODESET drivers.

The new hooks get plugged into core by adding wrapper functions for
vblank handling code.  The .get_vblank_counter hook is effectively
optional, as we provide drm_vblank_no_hw_counter() as the default
fallback in the wrapper function.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-2-git-send-email-shawnguo@kernel.org

drm/fb-helper: Automatically clean up fb_info

Noticed that everyone duplicates the same logic here and we could safe
a few lines per driver. Yay for lots of drivers to make such tiny
refactors worth-while!

v2: Forgot to git add everything :(

v3: Actually remove release_fbi (Sean, Emil, Chris) ...

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207161603.17611-1-daniel.vetter@ffwll.ch

drm/fb-helper: Explain unload sequence a bit better

While reviewing Chris' patches to properly cancel our async workers I
checked that this happens after the fbdev is already unregistered.
That's the case, but I found a small gap in our docs, fill that in.

Note that I don't explain what release_fbi does, because that function
will disappear in the next patch ...

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207141050.1129-1-daniel.vetter@ffwll.ch

drm/doc: Add TODO list

This commit adds a TODO list to the GPU driver developer's guide. The
content was taken from the DRMJanitors page on the X.Org wiki:

https://www.x.org/wiki/DRMJanitors/

The goal is to track a list of refactorings that would be nice to see
merged eventually. Sometimes these would be encountered during patch
review on the mailing list, and at other times one can come across
these while working in a specific area of code.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207175113.2793-1-thierry.reding@gmail.com

drm: Micro-optimise drm_mm_for_each_node_in_range()

As we require valid start/end parameters, we can replace the initial
potential NULL with a pointer to the drm_mm.head_node and so reduce the
test on every iteration from a NULL + address comparison to just an
address comparison.

add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-26 (-26)
function                                     old     new   delta
i915_gem_evict_for_node                      719     693     -26

(No other users outside of the test harness.)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170204111913.12416-1-chris@chris-wilson.co.uk

drm: mxsfb: Make local symbol mxsfb_funcs static

Fixes the following sparse warning:

drivers/gpu/drm/mxsfb/mxsfb_drv.c:129:38: warning:
 symbol 'mxsfb_funcs' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170205160538.16594-1-weiyj.lk@gmail.com

drm: mxsfb: fix error return code in mxsfb_load()

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170205160036.7364-1-weiyj.lk@gmail.com

drm/nouveau/kms/nv50: Switch to using atomic helper for flip.

v2:
Update code after flip_flags moved from plane_state
to crtc_state

v5:
Rename to pageflip_flags.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486072591-3893-3-git-send-email-Andrey.Grodzovsky@amd.com

drm/atomic: Save flip flags in drm_crtc_state

Allows using atomic flip helpers for drivers
using ASYNC flip.
Remove ASYNC_FLIP restriction in helpers and
caches the page flip flags in drm_crtc_state
to be used in the low level drivers.

v2:
Resending the patch since the original was broken.

v3:
Save flag in crtc_state instead of plane_state

v4:
Reset the flag before using again.

v5:
Fix type in header.
Rename the field to pageflip_flags.
Remove unrelated hunk.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486072591-3893-2-git-send-email-Andrey.Grodzovsky@amd.com

drm: kselftest for drm_mm and bottom-up allocation

Check that if we request bottom-up allocation from drm_mm_insert_node()
we receive the next available hole from the bottom.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202114434.3060-2-chris@chris-wilson.co.uk

drm: Improve drm_mm search (and fix topdown allocation) with rbtrees

The drm_mm range manager claimed to support top-down insertion, but it
was neither searching for the top-most hole that could fit the
allocation request nor fitting the request to the hole correctly.

In order to search the range efficiently, we create a secondary index
for the holes using either their size or their address. This index
allows us to find the smallest hole or the hole at the bottom or top of
the range efficiently, whilst keeping the hole stack to rapidly service
evictions.

v2: Search for holes both high and low. Rename flags to mode.
v3: Discover rb_entry_safe() and use it!
v4: Kerneldoc for enum drm_mm_insert_mode.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> # vmwgfx
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> #etnaviv
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202210438.28702-1-chris@chris-wilson.co.uk

Merge remote-tracking branch 'airlied/drm-next' into drm-misc-next

Yet another backmerge to get at latest etnaviv code, which is need for
Chris' drm_mm patch.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Merge branch 'drm-etnaviv-next' of https://git.pengutronix.de/git/lst/linux into drm-next

It includes code cleanups from Bhumika and Liviu, a significant shader
performance fix and additions to the cmdstream validator from Wladimir
and the addition of a cmdbuf suballocator by myself.
The suballocator improves performance on all chips by reducing the CPU
overhead of the kernel driver and side steps the GC3000 FE MMU flush
erratum, now making the workarounds in IOVA allocation we had before
unnecessary, which results in a nice cleanup of the code in that area.

* 'drm-etnaviv-next' of https://git.pengutronix.de/git/lst/linux:
  drm/etnaviv: Remove duplicate header file include
  Revert "drm/etnaviv: trick drm_mm into giving out a low IOVA"
  drm/etnaviv: add cmdbuf suballocator
  drm/etnaviv: get cmdbuf physical address through the cmdbuf abstraction
  drm/etnaviv: wire up iova handling in new cmdbuf abstraction
  drm/etnaviv: move cmdbuf de-/allocation into own file
  drm/etnaviv: always flush MMU TLBs on map/unmap
  drm/etnaviv: constify etnaviv_iommu_ops structures
  drm/etnaviv: set up initial PULSE_EATER register
  drm/etnaviv: add new GC3000 sensitive states

drm: Fix build when FBDEV_EMULATION is disabled

Commit be7f735cd5ea ("drm: Rely on mode_config data for fb_helper
initialization") broke the build when CONFIG_DRM_FBDEV_EMULATION is
disabled because it didn't update the prototype for drm_fb_helper_init
in that case.

Fixes: be7f735cd5ea ("drm: Rely on mode_config data for fb_helper
 initialization")
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202193900.22075-1-krisman@collabora.co.uk

drm: Rely on mode_config data for fb_helper initialization

Instead of receiving the num_crts as a parameter, we can read it
directly from the mode_config structure.  I audited the drivers that
invoke this helper and I believe all of them initialize the mode_config
struct accordingly, prior to calling the fb_helper.

I used the following coccinelle hack to make this transformation, except
for the function headers and comment updates.  The first and second
rules are split because I couldn't find a way to remove the unused
temporary variables at the same time I removed the parameter.

// <smpl>
@r@
expression A,B,D,E;
identifier C;
@@
(
- drm_fb_helper_init(A,B,C,D)
+ drm_fb_helper_init(A,B,D)
|
- drm_fbdev_cma_init_with_funcs(A,B,C,D,E)
+ drm_fbdev_cma_init_with_funcs(A,B,D,E)
|
- drm_fbdev_cma_init(A,B,C,D)
+ drm_fbdev_cma_init(A,B,D)
)

@@
expression A,B,C,D,E;
@@
(
- drm_fb_helper_init(A,B,C,D)
+ drm_fb_helper_init(A,B,D)
|
- drm_fbdev_cma_init_with_funcs(A,B,C,D,E)
+ drm_fbdev_cma_init_with_funcs(A,B,D,E)
|
- drm_fbdev_cma_init(A,B,C,D)
+ drm_fbdev_cma_init(A,B,D)
)

@@
identifier r.C;
type T;
expression V;
@@
- T C;
<...
when != C
- C = V;
...>
// </smpl>

Changes since v1:
 - Rebased on top of the tip of drm-misc-next.
 - Remove mention to sti since a proper fix got merged.

Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk

drm: Provide a driver hook for drm_dev_release()

Some state is coupled into the device lifetime outside of the
load/unload timeframe and requires teardown during final unreference
from drm_dev_release(). For example, dmabufs hold both a device and
module reference and may live longer than expected (i.e. the current
pattern of the driver tearing down its state and then releasing a
reference to the drm device) and yet touch driver private state when
destroyed.

v2: Export drm_dev_fini() and move the responsibility for finalizing the
drm_device and freeing it to the release callback. (If no callback is
provided, the core will call drm_dev_fini() and kfree(dev) as before.)
v3: Remember to add drm_dev_fini() to drm_drv.h
v4: Tidy language for kerneldoc
v5: Cross reference from drm_dev_init() to note that driver->release()
allows for arbitrary embedding.
v6: Refer to driver data rather than driver state, as state is now
becoming associated with the struct drm_atomic_state and friends.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[danvet: Use the proper reference for struct members, which is
&drm_driver.release.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202093632.31017-1-chris@chris-wilson.co.uk

drm: meson: rename driver name to meson-drm

The platform driver name is currently "meson" which can lead to some
confusion, this patch renames it to "meson-drm" and removes the owner
attribute since is always added by __platform_driver_register called by the
module_platform_driver() macro.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1486028864-19622-3-git-send-email-narmstrong@baylibre.com

drm: meson: rename module name to meson-drm

The module is currently named "meson.ko" which can lead to some
confusion, this patches renames it "meson-drm.ko"

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1486028864-19622-2-git-send-email-narmstrong@baylibre.com

drm/bridge/sii8620: enable interlace modes

Bug in DECON(CRTC) driver prevented interlace modes from proper work.
Since DECON is fixed interlace modes can be enabled in MHL.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-26-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: enable MHL3 mode if possible

Since all sub-protocols of MHL3 are already supported MHL3 mode can be
enabled. With this patch it is possible to use packed pixel modes and
clocks up to 300MHz - 1920x1080@60Hz and 4K modes.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-25-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: add HSIC initialization code

In case of MHL3 HSIC should be initialized.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-24-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: improve gen2 write burst IRQ routine

The patch adds code to report back feature complete IRQ, and code
to read and drop burst writes from peer.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-23-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: send EMSC features on request

Device should report to the peer which features are really supported.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-22-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: rewrite hdmi start sequence

MHL3 protocol requires registry adjustments depending on chosen video mode.
Necessary information is gathered in mode_fixup callback. In case of HDMI
video modes driver should also send special AVI and MHL3 infoframes.
The patch introduces generic helpers for handling MHL3 infoframes, in
case of appearance of other users of MHL3 infoframes these function can
be moved to common library.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-21-git-send-email-a.hajda@samsung.com

drm/bridge/mhl: add MHL3 infoframe related definitions

MHL3 protocol uses vendor specific infoframes to transmit additional
information to the sink. This patch adds definitions of structures and
constants used to create such frames.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-20-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: fix disconnect sequence

The patch allows to avoid rare cases when discovery fails.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-19-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: split EDID read and write code

MHL3 requires that after reading EDID from the sink source should ask
peer for features. To make both protocols happy the patch splits the code
accordingly.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-18-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: add delay during cbus reset

Without delay CBUS sometimes was not reset properly.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-17-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: do not stop MHL output when TMDS input is stopped

Stopping output causes full re-detection of the sink and slows down the
process.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-16-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: set gen2 write burst before sending MSC command

Write burst should be enabled for MHL_INT_RC_FEAT_REQ and disabled for
other commands. The patch moves functions up and adds delay setting
for MHL3 burst mode.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-15-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: abstract out sink detection code

MHL1 and MHL3 have different initialization paths. To make both protocols
happy sink detection is put into continuation after link mode enablement.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-14-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: fix initialization sequence for MHL2 receivers

MHL2 receiver require disabling transmitter on initialization.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-13-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: fix MSC message removal

Messages queue can be cleaned up by message callbacks, to avoid repeated
removal of current message it should be removed from the queue before
calling these callbacks.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-12-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: remove spare CBUS bring-up sequence

In case of MHL3 CBUS is bring-up already in sii8620_got_ecbus_speed.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-11-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: fix peer device capabilities read code

Peer capabilities should be read differently depending on protocol version.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-10-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: respond to feature requests

MHL3 protocol requires device to respond to feature request from peer.
This minimal answer fulfills the requirement and allows to continue
negotiation.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-9-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: add support for burst eMSC transmissions

Burst transmissions are used in MHL3 mode negotiation.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-8-git-send-email-a.hajda@samsung.com

drm/bridge/mhl: add write burst related definitions

Burst transmissions are required in MHL3 modes.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-7-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: initial support for eCBUS-S mode

The Single-ended eCBUS Mode (eCBUS-S) mode provides 60 Mb/s full-duplex
bidirectional traffic for three channels:
 - CBUS data (CBUS1 channel),
 - High-bandwidth MHL data (eMSC channel),
 - tunneling data (T-CBUS channel).
It is required to fully support MHL3 dongles.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-6-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: add continuations to messages

Due to asynchronous nature of MHL flow of execution is dispersed.
Logical continuation of some actions happens after response of peer,
i.e in interrupt handler. To simplify coding continuation mechanism
has been added - it is now possible to provide continuation callback,
which will be called after peer responds to given action.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-5-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: add reading device capability registers

This functionality is necessary to implement MHL3 modes.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-4-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: add MHL3 mode check helper

MHL3 modes differs significantly from MHL1 mode, this helper will be used
frequently to clearly distinguish them.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-3-git-send-email-a.hajda@samsung.com

drm/bridge/sii8620: simplify MHL3 mode setting

It is not necessary to set REG_COC_CTL0, REG_MHL_COC_CTL1 registers.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-2-git-send-email-a.hajda@samsung.com

drm/etnaviv: Remove duplicate header file include

etnaviv_gem.h header gets included twice. Remove duplicate.

Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Revert "drm/etnaviv: trick drm_mm into giving out a low IOVA"

Now that commandstreams are handled through the cmdbuf suballocator
the workaround to make the IOVA games work is not needed anymore.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

drm/etnaviv: add cmdbuf suballocator

There are 3 big benefits to suballocating a single big DMA buffer
for command submission:

1. Avoid hammering CMA. The old way of allocating and freeing a DMA
   buffer for each submission was hitting some of the real slow
   pathes in CMA, as this allocator was not designed for a concurrent
   small buffers load.

2. Less TLB flushes on IOMMUv2. If a new command buffer is mapped into
   the GPU address space the MMU TLBs need to be flushed. By having
   one big buffer statically mapped to the GPU, a lot of those flushes
   can be avoided.

3. No funky workarounds for GC3000. The FE TLB flush on GC3000 isn't
   reliable. To work around that we tried to lay out the cmdbufs in
   the GPU address space in a way to avoid this issue. This hasn't
   always worked if the address space is crowded. A single statically
   mapped buffer avoids the erratum completely.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

drm/etnaviv: get cmdbuf physical address through the cmdbuf abstraction

Don't allow IOMMUv2 to peek directly into the cmdbuf, but get the
needed PA through a dedicated function.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

drm/etnaviv: wire up iova handling in new cmdbuf abstraction

Don't call the IOMMU directly, but go through the new cmdbuf abstraction.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

drm/etnaviv: move cmdbuf de-/allocation into own file

This will get more complex with the following changes, so move it
into its own place.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

drm/etnaviv: always flush MMU TLBs on map/unmap

This ensures that the GPU isn't able to write into already freed
objects, as doing this in the IOVA reaper isn't enough, as the
gem_free_object path will also cause unmaps to happen.

On MMUv2 this also ensures that stale entries, which may have
been prefetched into the TLB will be purged.

The flush is low overhead, as it gets batched up with the next
user command buffer, so this isn't incuring an overhead for
each buffer map/unmap.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

drm/etnaviv: constify etnaviv_iommu_ops structures

Declare etnaviv_iommu_ops structure as const as it is only used when
the reference of one of its field is stored in the ops field of a
iommu_domain structure. This ops field is of type const, so
etnaviv_iommu_ops structures having similar properties can be declared
const too.

Done using Coccinelle.
Before and after size details of .o file remains the same after
cross compiling for arm architecture.

lst: Trimmed commit message, apply the same change to iommu_v2.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

drm: qxl: Embed drm_device into driver structure

This is the recommended way to create the drm_device structure,
according to DRM documentation.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170127010548.27970-4-krisman@collabora.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm: qxl: Drop duplicated pci_device pointer attribute

qxl_device duplicates the pointer to struct pci_dev, which is not
needed since we already have it in the drm_device structure.  Clean it
up.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170127010548.27970-3-krisman@collabora.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm: qxl: Drop duplicated device pointer attribute

qxl_device duplicates a pointer to struct device, which is not needed
since we already have it in the drm_device structure.  Clean it up.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170127010548.27970-2-krisman@collabora.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm: qxl: Drop misleading comment

No longer true since commit 07f8d9bdb235 ("drm/qxl: add support for > 1
output").  qxl_num_crtc defaults to 4 and is configurable as a module
parameter.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170127010548.27970-1-krisman@collabora.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/bochs: Implement nomodeset

Up until now, the bochsdrm driver didn't handle the nomodeset option
at boot, and didn't provide a "modeset" module option either.

This patch implements both.

The new parameter can be used by specifying bochs-drm.modeset=0
at boot time.

Signed-off-by: Max Staudt <mstaudt@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/1484763012-17783-1-git-send-email-mstaudt@suse.de
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/vc4: Add DSI driver

The DSI0 and DSI1 blocks on the 2835 are related hardware blocks.
Some registers move around, and the featureset is slightly different,
as DSI1 (the 4-lane DSI) is a later version of the hardware block.
This driver doesn't yet enable DSI0, since we don't have any hardware
to test against, but it does put a lot of the register definitions and
code in place.

v2: Use the clk_hw interfaces, don't set CLK_IS_BASIC (from review by
    Stephen Boyd)

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/20170131192912.11316-1-eric@anholt.net

dt-bindings: Document the VC4 DSI module nodes.

These are part of the vc4 display pipeline.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161214194621.16499-7-eric@anholt.net

drm/vc4: Add support for feeding DSI encoders from the pixel valve.

We have to set a different pixel format, which tells the hardware to
use the pix_width field that's fed in sideband from the DSI encoder to
divide the "pixel" clock.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161214194621.16499-6-eric@anholt.net

drm/vc4: Set up SCALER_DISPCTRL at boot.

We want the HVS on, obviously, and we also want DSP3 (PV1's source) to
be muxed from HVS channel 2 like we expect in vc4_crtc.c.  The
firmware wasn't setting the DSP3 mux up when both the LCD and HDMI
were disabled.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161214194621.16499-5-eric@anholt.net

drm: Clean up the 1366x768 fixup codes

This is just a cleanup, no functional change.

The fixup code for 1366x768 in drm_mode_create_from_cmdline_mode() is
basically a copy of the existing code in drm_edid.c.  Make the latter
code public so that it can be called from the former function.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117164329.10551-1-tiwai@suse.de
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[vsyrjala: include drm_crtc_internal.h to make sparse happy]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

Merge remote-tracking branch 'airlied/drm-next' into drm-misc-next

Backmerge to resync and also so that Ville can apply a cleanup patch
from Takashi.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Merge branch 'exynos-drm-next' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

adding runtime PM support to MIC driver, and including some
cleanups - especially using atomic helper functions
instead of specific ones - and fixups.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: g2d: prevent integer overflow in
  drm/exynos: fix a timeout loop
  drm/exynos: use atomic helper commit
  drm/exynos: remove unnecessary codes
  drm/exynos: mic: Add runtime PM support
  drm/exynos: Stop using drm_framebuffer_unregister_private
  drm/exynos: mic: Fix parse_dt function
  drm/exynos: mic: Add mode_set callback function

Merge tag 'sunxi-drm-for-4.11' of https://git./linux/kernel/git/mripard/linux into drm-next

Allwinner DRM changes for 4.11

Just one minor fix.

* tag 'sunxi-drm-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  drm/sun4i: Fix a return value in case of error

Merge branch 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux into drm-next

This is to address what we've discussed, moving some of the minor changes
into a drm-next request.

* 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux:
  drm/vmwgfx: Use kmemdup instead of kmalloc and memcpy
  drm/vmwgfx: Fix depth input into drm_mode_legacy_fb_format
  drm/vmwgfx: Fix a potential integer overflow
  drm/vmwgfx: Clear an uninitialized struct member
  drm/vmwgfx: Annotate ignored return values
  drm/vmwgfx: Clear uninitialized fields of a parameter

Merge branch 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux into drm-next

This is the main feature pull for radeon and amdgpu for 4.11.  Highlights:
- Power and clockgating improvements
- Preliminary SR-IOV support
- ttm buffer priority support
- ttm eviction fixes
- Removal of the ttm lru callbacks
- Remove SI DPM quirks due to MC firmware issues
- Handle VFCT with multiple vbioses
- Powerplay improvements
- Lots of driver cleanups

* 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux: (120 commits)
  drm/amdgpu: fix amdgpu_bo_va_mapping flags
  drm/amdgpu: access stolen VRAM directly on CZ (v2)
  drm/amdgpu: access stolen VRAM directly on KV/KB (v2)
  drm/amdgpu: fix kernel panic when dpm disabled on Kv.
  drm/amdgpu: fix dpm bug on Kv.
  drm/amd/powerplay: fix regresstion issue can't set manual dpm mode.
  drm/amdgpu: handle vfct with multiple vbios images
  drm/radeon: handle vfct with multiple vbios images
  drm/amdgpu: move misc si headers into amdgpu
  drm/amdgpu: remove unused header si_reg.h
  drm/radeon: drop pitcairn dpm quirks
  drm/amdgpu: drop pitcairn dpm quirks
  drm: radeon: radeon_ttm: Handle return NULL error from ioremap_nocache
  drm/amd/amdgpu/amdgpu_ttm: Handle return NULL error from ioremap_nocache
  drm/amdgpu: add new virtual display ID
  drm/amd/amdgpu: remove the uncessary parameter for ib scheduler
  drm/amdgpu: Bring bo creation in line with radeon driver (v2)
  drm/amd/powerplay: fix misspelling in header guard
  drm/ttm: revert "add optional LRU removal callback v2"
  drm/ttm: revert "implement LRU add callbacks v2"
  ...

Merge tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc into drm-next

Another round of -misc stuff:
- Noralf debugfs cleanup cleanup (not yet everything, some more driver
  patches awaiting acks).
- More doc work.
- edid/infoframe fixes from Ville.
- misc 1-patch fixes all over, as usual

Noralf needs this for his tinydrm pull request.

* tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits)
  drm/vc4: Remove vc4_debugfs_cleanup()
  dma/fence: Export enable-signaling tracepoint for emission by drivers
  drm/tilcdc: Remove tilcdc_debugfs_cleanup()
  drm/tegra: Remove tegra_debugfs_cleanup()
  drm/sti: Remove drm_debugfs_remove_files() calls
  drm/radeon: Remove drm_debugfs_remove_files() call
  drm/omap: Remove omap_debugfs_cleanup()
  drm/hdlcd: Remove hdlcd_debugfs_cleanup()
  drm/etnaviv: Remove etnaviv_debugfs_cleanup()
  drm/etnaviv: allow build with COMPILE_TEST
  drm/amd/amdgpu: Remove drm_debugfs_remove_files() call
  drm/prime: Clarify DMA-BUF/GEM Object lifetime
  drm/ttm: Make sure BOs being swapped out are cacheable
  drm/atomic: Remove drm_atomic_debugfs_cleanup()
  drm: drm_minor_register(): Clean up debugfs on failure
  drm: debugfs: Remove all files automatically on cleanup
  drm/fourcc: add vivante tiled layout format modifiers
  drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F
  drm/edid: Set AVI infoframe Q even when QS=0
  drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range()
  ...

Merge tag 'drm/atmel-hlcdc/for-4.11' of git://git./linux/kernel/git/bbrezillon/linux into drm-next

Contains a single patch to create the fbdev at driver's registration
time instead of waiting for the connector status change.

* tag 'drm/atmel-hlcdc/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bbrezillon/linux:
  drm/atmel-hlcdc: Rework the fbdev creation logic

Merge tag 'zxdrm-4.11' of git://git./linux/kernel/git/shawnguo/linux into drm-next

ZTE DRM driver updates for 4.11:
 - Add missing selection of VIDEOMODE_HELPERS in Kconfig, since ZTE DRM
   driver uses drm_display_mode_to_videomode().
 - Enable HDMI audio support through SPDIF interface based on generic
   hdmi-audio-codec driver.
 - Enable VOU VL (Video Layer) to support overlay plane with scaling
   function.
 - Refine zx_vou driver a bit and then add TV Encoder output device
   support.

[airlied: fixup plane format change]

* tag 'zxdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  drm: zte: add tvenc driver support
  dt: add bindings for ZTE tvenc device
  drm: zte: add function to configure vou_ctrl dividers
  drm: zte: move struct vou_inf into zx_vou driver
  drm: zte: add interlace mode support
  drm: zte: add overlay plane support
  drm: zte: add .atomic_disable hook to disable graphic layer
  drm: zte: make zx_plane accessible from zx_vou driver
  drm: zte: support hdmi audio through spdif
  drm: zte: select VIDEOMODE_HELPERS in Kconfig

Merge branch 'drm-intel-next' of git://anongit.freedesktop.org/git/drm-intel into drm-next

Updated pull request after I pulled first time :)

* 'drm-intel-next' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: Pevent copying uninitialised garbage into vma->ggtt_view

Merge branch 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-next

Hope I'm not too late before the cutoff for the v4.11 with these patches.
Mostly an asorted set of fixes that we have discovered while playing with
the code and preparing for the next set of features.

* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
  drm: mali-dp: fix stride setting for multi-plane formats
  drm: mali-dp: Add plane offset to the plane's physical start address register
  drm: mali-dp: Check for sufficient address space
  drm: mali-dp: Check hw version matches device-tree
  drm: mali-dp: Rename malidp_input_format to malidp_pixel_format
  drm: mali-dp: fix Lx_CONTROL register fields clobber
  drm: mali-dp: Fix transposed horizontal/vertical flip
  drm: mali-dp: Fix destination size handling when rotating
  drm: mali-dp: Don't force source size == crtc size
  drm: mali-dp: Check more use cases in the plane's ->atomic_check()
  drm: malidp: Remove event_list member from struct malidp_drm
  drm/arm/malidp: Fix possible dereference of NULL

Documentation/gpu: drm-mm.rst: fix formatting for struct vm_operations_struct

drm-mm.rst contains some unformatted dump of the vm_operations_struct
structure. Add some C formatting around it and some context for the
dump. While there, update the structure to resemble the new signature
for the fault handler after commit 25d3db7600b8 (mm, fs: reduce fault,
page_mkwrite, and pfn_mkwrite to take only vmf).

Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170131174109.13690-1-Liviu.Dudau@arm.com

drm/color: un-inline drm_color_lut_extract()

The function is not that big, but it's also not used for anything
performance critical. Make it a normal function.

As a side effect, this apparently makes sparse smarter about what it's
doing, and gets rid of the warning:

./include/drm/drm_color_mgmt.h:53:28: warning: shift too big (4294967295) for type unsigned long
./include/drm/drm_color_mgmt.h:53:28: warning: cast truncates bits from constant value (8000000000000000 becomes 0)

v2: rebased

Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485531291-24821-1-git-send-email-jani.nikula@intel.com

drm/docs: Fix documentation for drm_atomic_set_mode_for_crtc

drm_atomic_set_mode_for_crtc() modifies the .enable member of CRTC state
but documentation claims otherwise, fix that.

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1485843518-28438-1-git-send-email-dhinakaran.pandiyan@intel.com

virtio-gpu: disable VIRGL with BE kernel

VIRTIO_GPU_F_VIRGL is added in features list only
for LE kernel, so we must check for it only on LE kernel,
otherwise virtio_has_feature() calls BUG() and
crashes the kernel.

Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485263549-28743-1-git-send-email-lvivier@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/exynos: g2d: prevent integer overflow in

The size computations done in the ioctl function use an integer.
If userspace submits a request with req->cmd_nr or req->cmd_buf_nr
set to INT_MAX, the integer computations overflow later, leading
to potential (kernel) memory corruption.

Prevent this issue by enforcing a limit on the number of submitted
commands, so that we have enough headroom later for the size
computations.

Note that this change has no impact on the currently available
users in userspace, like e.g. libdrm/exynos.

While at it, also make a comment about the size computation more
detailed.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fix a timeout loop

We were trying to print an error message if we timed out here, but the
loop actually ends with "tries" set to UINT_MAX and not zero.  Fix this
by changing from tries-- to --tries.

A for loop would actually be the most natural way to do this.  My fix
means we only loop 99 times instead of 100 but that's probably ok.

Fixes: a696394c5224 ('drm/exynos: mixer: simplify loop in vp_win_reset()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: use atomic helper commit

This patch replaces specific atomic commit function
with atomic helper commit one.

For this, it removes existing atomic commit function
and relevant code specific to Exynos DRM and makes
atomic helper commit to be used instead.

Below are changes for the use of atomic helper commit:
- add atomic_commit_tail callback specific to Exynos DRM
  . default implemention of atomic helper doesn't mesh well
    with runtime PM so the device driver which supports runtime
    PM should call drm_atomic_helper_commit_modeset_enables function
    prior to drm_atomic_helper_commit_planes function call.
    atomic_commit_tail callback implements this call ordering.
- allow plane commit only in case that CRTC device is enabled.
  . for this, it calls atomic_helper_commit_planes function
    with DRM_PLANE_COMMIT_ACTIVE_ONLY flag in atomic_commit_tail callback.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>

drm/exynos: remove unnecessary codes

This patch removes exynos_drm_crtc_cancel_page_flip call
when drm is closed because at that time, events will be released
by drm_events_release function.

Changelog v1:
- remove exynos_drm_crtc_cancel_page_flip function also because
  this funtion isn't used anymore.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

drm/exynos: mic: Add runtime PM support

This patch adds runtime support calls to notify device core when MIC
device is really in use. Runtime PM is implemented by enabling and
disabling clocks like in other Exynos DRM subdrivers. Adding runtime
PM support is needed to let power domain with this device to be turned
off when display is not used.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: Stop using drm_framebuffer_unregister_private

This is the deprecated function for when you embedded the framebuffer
somewhere else (which breaks refcounting). But exynos is using
drm_framebuffer_remove and a free-standing fb, so this is rendundant.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: mic: Fix parse_dt function

The OF graph is not necessary because the panel is a child of
dsi. therefore, the parse_dt function of dsi does not need to
check the remote_node connected to the panel. and the whole
parse_dt function should be refactored later.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: mic: Add mode_set callback function

Before applying the patch, used the of_get_videomode function to
parse the display-timings in the panel which is the child driver
of dsi in the devicetree. this is wrong. So removed the
of_get_videomode and fixed to get videomode struct through
mode_set callback function.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

MAINTAINERS: add dma-fence* files to Sync File maintainership

As Sync File is highly dependent on dma-fence* tracks it
under SYNC FILE_FRAMEWORK as well.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170127175444.7995-1-gustavo@padovan.org