bitbake: utils: Use rm -rf in remove()

Whilst shutils.rmtree() is pythonic, its also slow. Its faster to
use rm -rf which makes optimial use of the right syscalls.

(Bitbake rev: 96088ebdec08e49ba9e8dbcac437bfcdc21f5983)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

dropbear: use pidfile for daemon start/stop/restart

Old init script killed all dropbear processes when doing stop/restart
including open SSH sessions which is very annoying.

(From OE-Core rev: 97aa5ac2df7593e343d82f5e64a422bb951eacf9)

Signed-off-by: Roman I Khimov <khimov@altell.ru>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

tzcode-native: Fix SRC_URI checksum typo

(From OE-Core rev: dac9290b20819bb7f74fa27b87b8077d8856c551)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemd.bbclass: Dont use libdir and base_libdir for units

systemd always uses /lib and /usr/lib to store unit files
so using libdir and base_libdir is incorrect. It will work
where libdir is usr/lib and base_libdir is /lib but wont work
when say its /lib64

Add a check to make sure that SYSTEMD_PACKAGES are part of PACKAGES
too, otherwise error out

(From OE-Core rev: 22e16f44b58ae6bbf719b9074d39aac065a402f1)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gnupg: fix CVE-2012-6085

Code taken from Redhat

[YOCTO #3813]

(From OE-Core rev: 17f8e03ace51df6b94fdcb7e410acf79c7b046ce)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sanity.bbclass: when bblayers.conf is updated, it invokes a reparse

When bblayers.conf is updated(when sanity check is running), it should
tell to bitbake to reparse configuration files. I will send a patch to
bitbake-devel, with the actions needed in bitbake and hob.

[YOCTO #3213]
(From OE-Core rev: 5db1ff93f7204b43b7242fc7ef415216eb632ed8)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_ipk: check CONFFILES exist before adding them to metadata

opkg-build verifies that conffiles exist, so verify that the specified files
actually exist before writing them to conffiles.

This mirrors the behaviour of FILES and package_rpm's CONFFILES handling.

(From OE-Core rev: fb87edc881009cf4d582cd95c248884551fe07fe)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

scripts/bitbake: Remove all instances of paths to a layer's scripts directory.

* Currently the assumption is made that only oe-core can include a scripts
  directory.

* However, when other layers create a scripts directory the bitbake script
  freaks out causing a infinite recursive loop until it crashes.

* Simply changing the regular expression to remove all instances of scripts path
  instead of just the first one fixes this problem.

 [Yocto Bug 3872]

(From OE-Core rev: 9b445cc39604223b0cfb21d28f748a86ff4cdf68)

Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

alsa-lib: upgrade to 1.0.26

(From OE-Core rev: 759191ee0b11231e1719bd5c66ac0afbd02e2a80)

Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemd: add udev-extraconf and USB/PCI IDs to RRECOMMENDS

The standalone udev has these dependencies and extraconf is required to have
working automount amongst other things.

(From OE-Core rev: 3d72ba9d25a02cac2c0a63ab32c5483be5c6ea3f)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libpng: update to upstream version 1.5.14

obsolete_automake_macros.patch removed as it's not part of upstream.
The only changes to license texts are latest libpng version number
and release dates.

(From OE-Core rev: d68e9660327db2dd4f2ae7bcea9925146b94eb77)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

harfbuzz: update to upstream version 0.9.12

Fixed license declaration to have AND between all the licenses
instead of OR.

(From OE-Core rev: 0a90fb2faebbb7848dbd5a23b37490866b397f5f)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gtk+: update to upstream version 2.24.15

- configure-nm.patch updated to apply
- hardcoded_libtool.patch updated to apply
- obsolete_automake_macros.patch removes as it's now part of upstream

(From OE-Core rev: a4ed7da18d8622fc0b6e3d32ac8ce9456b912322)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

webkit-gtk: update to upstream version 1.8.3

(From OE-Core rev: 570e5e20623031ad03cce470fc3d94d9a5b05827)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xev: upgrade to 1.2.1

Licence didn't change, the end line for computing the licence md5sum was
inside the actual code which, eventually changed. Adjust it to the right
line.

(From OE-Core rev: 96d9e102067471018acfa9651b810f0d33a363fa)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xf86-video-vmware: upgrade to 13.0.0

Removed backported patch.

(From OE-Core rev: f264bf699a42dfe2616386d03524642890308e80)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xf86-input-synaptics: upgrade to 1.6.3

(From OE-Core rev: a1eef756921d66138ef233c451a99b2ee1356cfb)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xkeyboard-config: upgrade to 2.8

(From OE-Core rev: 40083ca6decd05f480b0a8cd5923e68884c3b307)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libdrm: upgrade to 2.4.42

(From OE-Core rev: dd53452b1cf2ccec44f465ac420d134a17332c7b)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xf86-input-vmmouse: upgrade to 13.0.0

(From OE-Core rev: e8f5f341256430cf45ee186435bccf593793b661)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xf86-video-intel: upgrade to 2.21.0

(From OE-Core rev: 7bdc27511c9129e35caf1bdc0df37b382f1b5b98)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

qemu: upgrade to 1.3.1

(From OE-Core rev: ca3ce0886df01936d5ad309de1d39520b5278a80)

Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: hob: remove save/load template functionality

The Hob templates functionality, in its current incarnation,
is confusing and has no clear utility.

[YOCTO #3696]
(Bitbake rev: 4eb3b6bb9f936808ddf085624078f6479c522c48)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: knotty.py: fix unknown event bb.event.DiskFull

There is an error:

ERROR: No new tasks can be excuted since the disk space monitor action
is "STOPTASKS"!
ERROR: Unknown event: <bb.event.DiskFull object at 0x2ab6310>

This is because we don't handle the event bb.event.DiskFull in
knotty.py, we don't want the knotty to do anything here since we have
done everything in monitordisk.py, so just ignore this event would fix
the problem.

[YOCTO #3523]

(Bitbake rev: 0fa874dbe0532bbe88ade405f514a237e6cd2488)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bitbake-layers: make show-cross-depends avoid long path

The "bitbake-layers show-cross-depends" print the absolute path in the
past, now it will print the relative path (relative to the layer dir) by
default, and add the "-f" option to make it print the absolute path.

For example:

$ bitbake-layers show-cross-depends
[snip]
meta-intel/meta-jasperforest/conf/machine/jasperforest.conf requires meta/conf/machine/include/ia32-base.inc
[snip]

$ bitbake-layers show-cross-depends -f
[snip]
/path/to/poky/meta-intel/meta-jasperforest/conf/machine/jasperforest.conf requires /path/to/poky/meta/conf/machine/include/ia32-base.inc
[snip]

[YOCTO #3824]

(Bitbake rev: df217701318d60559be0b10214b883b8ce4f5d2a)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: hob: remove parsing warnings when machine is changed

When the machine is changed, the warnings list is emptied and the warnings
bar is hidden.

[YOCTO #3830]
(Bitbake rev: 8e43da7798a98988f7da3f7c424e8f9e5eac2010)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: hob: no sanity checks re-run

Hob was hanging when the user tried a rebuild a new image, because
of sanity checks. It should not re-run sanity checks.

[YOCTO #3829]
(Bitbake rev: f7ff550f53cf3e5b166940db83f27ec733f3ef72)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: monitordisk.py: disable the inode checking for some fs

There is an error when use disk monitor on btrfs:
WARNING: The free inode of rootfs is running low (0.000K left)
ERROR: Immediately abort since the disk space monitor action is "ABORT"!

This is beucase some fs formats' statvfs.f_files (inodes) is zero, thus
the statvfs.f_favail (free inodes) is zero, too, this a feature of the
fs, we disable the inode checking for such a fs.

[YOCTO #3609]

(Bitbake rev: b2ada3ad5f7aefff107f013e0c9decea481c7ef6)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: fetch2: Improve lock/done stamp file paths for local files

Currently stamps end up at the top level of DL_DIR even if the files
themselves are in a directory structure. This patch preserves path
components allowing the top level directory to be less populated
which is an advantage for large sstate caches.

(Bitbake rev: 59921ce3ed7a4c0b7f8ef1a101ad9127469bf1fd)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bitbake & hob: reparse config files, when sanity check updates bblayers.conf

I've sent a patch to poky, with some changes in sanity.bbclass. When bblayers.conf
is updated, it updates also a variable to know when to reparse configuration files.
This patch contains the changes to reparse conf files, after a sanity check which
changes bblayers.conf.

[YOCTO #3213]
(Bitbake rev: 966e3e59ceb1c8b33b5881f291c148ea6513eda0)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: fetch2: Ensure expansions happen in URL parameters in uri_replace

For example, this allows us to specify downloadfilename=PATH in sstate
mirror urls to improve directory structures in DL_DIR when using sstate.

(Bitbake rev: 7850a1364b6b37c58664d84f9c14806b4479b45c)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: ConfHandler: Use re.X to make long regexp more readable

The __config_regexp__ in ConfHandler is quite long, and using re.X to
break the expression onto several lines make it a bit easier to read.

(Bitbake rev: 54dce9e14ab0657d76f0d0ae22eef7fab8e8950d)

Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: tests/codeparser: Hack around circular inclusion problem

There is a circular dependency issue where bb.data can't directly depend on
bb.parse. The tests were failing due to this issue which is misleading. This
patch hacks around it for now. I'd rather that than not running tests at all.

(Bitbake rev: a206ae0d7769a41ff3666d0f53ff9cf422dfa518)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: wget: Only use -O option when not spidering

If we pass the -O option whilst spidering, empty files are created which is not
desired. We also need to ensure any subdirectories are created when using the
downloadfilename parameter.

(Bitbake rev: d5f78e98d5aba36c95288fbaac267c2d54537b02)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: codeparser: Track bb.utils.contains usage

The bb.utils.contains function usage is getting increasingly used in the metadata
but isn't handled automatically by the python dependency tracking code. This patch
changes that and also adds the "OE" names for the functions.

Whilst there are reasons this is a bad idea, its likely outweighed by the
shear number of these references and the current holes in dependency information
which we're now relying heavily upon.

(Bitbake rev: 0b9d117631ce909312d53b93289e61defc6be01c)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: codeparser: Track appendVar and prependVar calls as we do for getVar

We need to track appendVar and prependVar calls just as we do for getVar in order
to ensure we're not missing variable dependencies.

(Bitbake rev: 767b4751232f4ee3979deb4d3f733fcf9ee2bd44)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

tzcode/tzdata: Update to 2012j

Readme update to indicate status of project and authorship

(From OE-Core rev: 6c6568e47d6b3b0edaba569bfa4e38f9d72b5122)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

tzdata: Simplify code removing not used cases

We shouldn't have an use-case where we'd use 'FUBAR' timezone so
instead of adding postinst handling for this use case we handle it at
install time and keep the Universal as fallback if user did something
wrong.

This also ensure the /etc/localtime file is kept as a symbolic link.
This will make timezone not available when /usr is in separated
partition (and not mounted) however the applications ought to fallback
to GMT timezone in this case and when /usr is made availble timezone
will work fine.

Change-Id: I9a4f05db7a0bdc06511deb5693d1d16569d2fc63
(From OE-Core rev: 4b5e1757224085deac54b2583853fc779dc70614)

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

tzdata: We shouldn't override the localtime if it is valid

The code where mistakenly replacing the localtime file setting so we
end with a copy of file instead of a symbolic link. This fixes it so
now, we'll only do that in case the link is pointing to invalid data.

Change-Id: I16dfa5ea4f293c48bb396f4e23a2ea53e6c9e745
(From OE-Core rev: a9b42c8e85332a65788b1434f926186d4887b287)

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Solved package namespace errors in PRS

For some packages PRS reported incorrect upstream version
as it was either the raw string or it mismatched some
alternative groups.

(From OE-Core rev: 6f3ace8ba75eed891aa4844a6830bedca3d8b70e)

Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

insane: remove unused variable

(From OE-Core rev: 1165a0b161ffc32258b0726e6ef3082d97dfb32a)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

remake: do not create po files

The 'make update' was using wget to get the gmo and other gnu files from
upstream, since need to work cleanly in a non-networked or proxy environment
this does not so well.  Remove the list of languages from the LINGUAS file.

[YOCTO #3745]

(From OE-Core rev: 9987f210e3faf31bfeab35ae56606c8a577b3aa0)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

mulitilib_header: Avoid sstate checksum issues for -native recipes

The use of arch specific variables like MIPSPKGSFX_ABI was creeping
into the -native sstate checksums of package like ncurses-native.

This is pointless and undesireable. We could add specific variable
exclusions but we might as well just brute force the code to be disabled
in the -native case since we don't use multilibs in the native case.

[YOCTO #3827]

(From OE-Core rev: cc7352ed990b1bdd26203a4d3b21286280ac26c5)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kconfig-frontends: Depend on pkgconfig-native

We were seeing errors like:

| autoreconf: running: /srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly/build/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf --force
| configure.ac:27: error: possibly undefined macro: AS_IF
|       If this token and others are legitimate, please use m4_pattern_allow.
|       See the Autoconf documentation.
| configure.ac:100: error: possibly undefined macro: AC_MSG_ERROR
| autoreconf: /srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly/build/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf failed with exit status: 1
| ERROR: autoreconf execution failed.

which turns out to mean the pkgconfig macros were unavailable (thanks for clear
error messages autoconf).

This patch adds in the missing dependency.

(From OE-Core rev: 26431ffda8886412147ff347c000a0ecc2671db5)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: Remove whitelisted vars from non-task deps

Though the value of variables in the BB_BASEHASH_WHITELIST is kept out of the
checksums, dependency on them is not, at least for variables and non-task
functions. In the code, the whitelist is removed from the overall task dep
list, but not the individual variable deps. The result of this is that
functions like sysroot_stage_all and oe_runmake end up with whitelisted
variables like TERM listed in their dependencies, which means that doing
a 'unset TERM' before building will result in all checksums for tasks that
depend on those changing, and shared state reuse not behaving correctly.

This is only really a potential issue for variables from the environment, as
it's the existance/removal of the variable that's an issue, not its value, and
the other whitelisted variables are set in our metadata. This which means in
practical terms the only cases where this is likely to be an issue are in
environments where one of the following are unset: TERM, LOGNAME, HOME, USER,
PWD, SHELL. This may seem like an unlikely circumstance, but is in fact a real
issue for those of us using autobuilders. Jenkins does not set TERM when
executing shell, which means shared state archives produced by your jenkins
server would not be fully reused by an actual user.

Fixed by removing the whitelisted elements from the individual variable deps,
not just the accumulated result.

(Bitbake rev: dac12560ac8431ee24609f8de25cb1645572d350)

Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: ConfHandler: Improve regexp to fix mis-parsing of += and no whitespace

If you have:

FOO = "a"
FOO += "b"
FOO+= "c"

The expected result is "a b c" however we were seeing "a b" with the FOO+
variable being assigned the value "c". This isn't the expected result.

We need to make the name part of the variale non-greedy so that any + character
becomes part of the operator. This patch does that. I compared the configuration
in OE-Core before and after the change and only the test case changed.

[YOCTO #3834]

(Bitbake rev: 2cd8d7fd12a646e6516e2c985e6a54121d19eb59)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

util-linux: Remove -systemd package

unit files are added to util-linux itself when selected

(From OE-Core rev: dbabe19d4ee5cc291b5d996e9b828eed3e4484d8)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Python: Add missing dependency "textutils" to "io" package

Modify the include file and script to generate a missing RDEPENDS.

Install python on target with python-io. Import ssl:

Python 2.7.3 (default, Feb  9 2013, 16:04:35)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import ssl
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
  File "/usr/lib/python2.7/ssl.py", line 58, in <module>
ImportError: No module named textwrap

Installing python-textutils solves the issue.

(From OE-Core rev: 900ae881c3483eea36aa0be456b93f92980f4924)

Signed-off-by: MiLo <milo-software@users.sourceforge.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

multilib: Fix an OVERRIDES expansion order issue

There were problems where a SRC_URI with:

SRC_URI_append_powerpc = " xxx"
SRC_URI_append_powerpc64 = " xxx2"

would end up with *both* xxx and xxx2 being added when using a multilib
which is clearly incorrect and undesirable.

The issue is that OVERRIDES has virtclass-multilib-xxxx added to it,
this eventually changed DEFAULTTUNE which then changes
TRANSLATED_TARGET_ARCH which is in OVERRIDES meaning we then need to
re-evaluate the overides and the TRANSLATED_TARGET_ARCH gets applied
twice since once you apply an override, it doesn't get undone.

Expanding DEFAULTTUNE to the correct value in advance avoids the issue
and means only the correct overrides get applied.

[YOCTO #3874]

(From OE-Core rev: 920c9024f5a47ad14670067f910450983bae2aa7)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

pseudo_1.4.5.bb: Finish fixing linkat()

The 1.4.4 fix replaced possible double-prepending of chroot paths
with possible non-prepending of chroot paths. After significant
evaluation, have settled on a single prepending of the chroot
path as a workable compromise.

(From OE-Core rev: a79597994e3f680e34a1a45fb37d76977903ded5)

Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

busybox: add config fragments

Add config fragments to busybox.

The implementation makes use of merge_config.sh script in kern-tools-native.
The use case is similar to the yocto kernel's configuration fragments.

We also add kern-tools-native to busybox's DEPENDS variable to ensure
that merge_config.sh is available when required.

[YOCTO #3379]

(From OE-Core rev: bbcd8b344598850ea2c8d3ad375c519713581fde)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gtkhtml2: remove, nothing depends on it

(From OE-Core rev: 1c3ed8c109f46e7e38649d6914693ed4c18f45a5)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

web: remove gtkhtml2 version

The gtkhtml2 version of Web is even older than the webkitgtk port, remove it.

(From OE-Core rev: 7ee3c35ca51e358e1d5a710922acb52c0724086e)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

pseudo_git.bb: Bump to pseudo 1.4.4.

The pseudo 1.4.2 linkat() implementation had a broken edge case
in which you could end up with chroot paths being doubled when
using plain link() calls instead of linkat() calls.

(From OE-Core rev: c70443ef21713d805012ef839e3fac04de8eadd2)

Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libtool-native_2.4.2.bb: Always use /bin/sed for SED

If you never use sstate and always build everything from scratch you
will never see this problem.  However, if you use sstate and build
directories that last a long time eventually you can end up with the
scenario where libtool gets a hard coded path in it for sed, and sed
may not exist.  The reason you don't see this problem to often if you
generally build from scratch is that libtool builds before sed and
will pickup the host's /bin/sed.

The way to reproduce the issue is:

bitbake some_image
bitbake -c cleansstate libtool-native
bitbake sed-native
bitbake libtool-native
bitbake -c clean sed-native
bitbake ANY_PACKAGE_THAT_USES_LIBTOOL_NATIVE

In my case I used modphp, which doesn't exist in the oe-core. You will
end up with a strange looking error like:

| make[1]: *** [buckets/apr_buckets_alloc.lo] Error 1
| /opt/build/bitbake_build/tmp/sysroots/x86_64-linux/usr/bin/x86_64-linux-libtool: line 981: /opt/build/bitbake_build/tmp/sysroots/x86_64-linux//bin/sed: No such file or directory

The solution is to always use /bin/sed for libtool-native.

(From OE-Core rev: 605e4484840e70c64acddb4aa1a3c9fec4078d9d)

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

site/x32-linux: Specify double alignment

Double alignment is 8 bytes on x32 but it is defaulting to 4 currently.
This leads to various issues and fontconfig fails to build due to the
mismatch triggering assert failures.

(From OE-Core rev: f2a0784f368fa8a766aae4242a0c187759b35393)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

scripts/qemuimage-testlib: Use wide option to ps calls

Forcing ps to display unlimited column width allows the qemu IP address to
be discovered during sanity testing when the command line is extremely long.

This seems to fix the sanity testing problem on AB05 which was recently updated
to OpenSUSE 12.2. I'm not sure what about qemu or process listing is different
on that distribution but this simpile fix seems to work and my help on other
distro's as well.

(From OE-Core rev: 4cea35cc4e4ed8e68cd117825b1dd4ef1be768c2)

Signed-off-by: Michael Halstead <michael@yoctoproject.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gtk+: use gtk-immodules-cache class

In order to have the proper postinst/postrm scriptlets generated for
gtk+ immodules packages, use the already existing class.

[YOCTO #3853]

(From OE-Core rev: 1c5646dde09008662f064ce7e7400c4d68775278)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gtk-immodules-cache: add weak asignment for GTKIMMODULES_PACKAGES

This is needed if the GTKIMMODULES_PACKAGES is changed later, in
do_populate_packages for example. This way, we don't have to add another
dumb asignment in the recipe inheriting this.

[YOCTO #3853]

(From OE-Core rev: e9e80eac6ab4982cb42fa2c5403630926351efed)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gnome-keyring: compile schemas on host

gsettings.bbclass offers just that.

[YOCTO #3854]

(From OE-Core rev: 2d5a935b70218335af4859f409b81769c9238db3)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

librsvg: use the new pixbufcache class

Also, fix the GDK_PIXBUF_QUERYLOADERS path.

[YOCTO #3582]

(From OE-Core rev: 801ca93cbd3e8fd8ce08f72432b6d4c80ed51261)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gdk-pixbuf: use the new pixbufcache class

[YOCTO #3582]

(From OE-Core rev: f6dce5376894d4ac91f01a85cffc828678695b04)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Add pixbufcache class

All packages exporting pixbuf loaders should inherit this class in order
to generate the correct postinst/postrm scriptlets.

[YOCTO #3852]

(From OE-Core rev: 61afa98f96f5c62473cb2db383b48d3d23c5d7ac)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

fontcache.bbclass: use the postinst_intercept script

"Link" the package to the postinstall hook by running the
postinst_intercept script.

(From OE-Core rev: a14faa3b9c55574a096d517431393e4ac3c86823)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gtk-icon-cache.bbclass: use postinst_intercept script

Since the hook has been made a standalone script, use postinst_intercept
script in order to "link" the package to the hook.

(From OE-Core rev: d7ddae84165b5b84dc6ac640fd492ade891ddd4e)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

rootfs_(ipk|deb|rpm).bbclass: check package installation status after ROOTFS_POSTPROCESS_COMMAND

Since the intercept fall-back procedure will change the package
installation status, do the checking after ROOTFS_POSTPROCESS_COMMAND
ends.

(From OE-Core rev: 414c3918baccc2166bba536c956eebaeb49aace3)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

image.bbclass: add fall-back functionality when running intercepts

If an intercept script fails, it would be helpful to fall-back to
running the postinstall on target's first boot. In order to achieve
that, the postinstalls that install a host intercept hook will have to
return 1, so that the postinstall is marked as unpacked only. If the
intercept hook fails, then we're ok, the postinstalls will be run on
target anyway. If it succeeds, then mark the packages as installed.

This logic was chosen mainly because of rpm backend which saves the
failed postinstalls in /etc/rpm-postinsts. Hence, in order to mark the
packages as installed, all we have to do is delete the scriptlets from
there.

(From OE-Core rev: ed8ac4ee43132ae974794038821f7ca5465ae556)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Add separate directory for postinstall intercepts

The scripts/postinst-intercepts will contain all postinstall hooks that
we need to run after all packages have been installed.

If one wants to install such a postinst hook, all it needs to do is put
the hook in this directory and, from the package postinstall scriptlet,
call:
postinst_intercept <hook_name> <package_name> <var1=...> ...

This will, practically, add the package_name in the list of packages
that need the hook to run and, also, set any variables that would be
needed in the hook. For example, variables like ${libdir}, ${bindir},
etc. that might depend on distribution can be passed on to the script in
this way.

(From OE-Core rev: 0ef538d75c2f3921a2fcbe6ca1deed5525b276cc)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

distro_check: Remove creation of empty Meego filelist.

This fixes permissions errors when running distrodata.

(From OE-Core rev: c58e6cf352774e147038e6543ac95ab0060f2327)

Signed-off-by: Anders Roxell <anders.roxell@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

mesa: upgrade to 9.0.2

(From OE-Core rev: 7a0eca4379b72981a378ffe62f4e8e3428ee791a)

Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

pixman: upgrade to 0.29.2

obsolete_automake_macros.patch: removed
- included in the new version

(From OE-Core rev: 31fc8a621fbeb4f5bec7c6b6fd03043bb382c34d)

Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

cairo: upgrade to 1.12.12

(From OE-Core rev: d5cd3638d339e2154696792160f93b155cb7b086)

Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gamin: replace obsolete automake macros with working ones

Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Removed AM_PROG_CC_STDC. AC_PROG_CC to replace it was already
present.

(From OE-Core rev: 84f083ac3a218513411e7c28edada7a80af8ad8c)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

diffutils: replace obsolete automake macros with working ones

Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Removed AM_PROG_CC_STDC. AC_PROG_CC to replace it was already
present.

(From OE-Core rev: 5e1a567872d6967ac4d5b78e9d226161d9651ded)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemtap: replace obsolete automake macros with working ones

Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Removed AM_PROG_CC_STDC. AC_PROG_CC to replace it was already
present.

(From OE-Core rev: 3a335af7da5a94249d2f0d49d89cf0c8f180776e)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libidn: remove help2man dependency

Remove manpage creation. It wasn't working because of help2man
missing when libidn is being built. This attempt to create
manpages without help2man turns from no-op to hard error with
automake-1.13.

(From OE-Core rev: 46a4a696eec4d92beac1072fe6c64da1089c7cf8)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

texinfo: remove help2man dependency

Remove manpage creation. It wasn't working because of help2man
missing when texinfo is being built. This attempt to create
manpages without help2man turns from no-op to hard error with
automake-1.13.

(From OE-Core rev: 2c8cebdfd8102d4386b5d42a7fc30cc81e8e2ef2)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libevent: fix build with automake-1.13

- Add obsolete_automake_macros.patch that replaces automake macros
  no longer supported by automake-1.13 with modern constructs.

- Use of $(top_srcdir) in TESTS is an error causing automake-1.13
  to abort. Disable the tests completely.

(From OE-Core rev: 751b5e76768d9fa4e40405a12ad008aa9af1561d)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Write DPKG_ARCH to /etc/apt/apt.conf

Apt does not recognize the architecture if a different one is set with
DPKG_ARCH (e.g. armel). This patch writes the correct architecture to
/etc/apt/apt.conf.

(From OE-Core rev: 81b8c36641994dc7a4e025f2d43f9ce57d04b6f0)

Signed-off-by: Stefan Eichenberger <stefan.eichenberger@netmodule.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

relocate_sdk.py: allow relocate_sdk.py to work with python 2.4.x

Avoid the chicken / egg problem of an SDK that provides a working
python but requires that version of python to extract itself.  The
RHEL 5.x systems and some other enterprise Linux systems ship with
python 2.4.x as the default python.  We need to at least be able to
extract work executables even if we never use the the host provided
python again.

(From OE-Core rev: e1d42db8749b0b965ddc6cfba4f3b93ee96ed4f4)

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

populate_sdk_base.bbclass: Improve debugging capabilities for SDK installer

After having to debug the SDK installer a few times in
addition to the relocation code the following patch was created
to improve the capabilities around debugging the SDK installer.

1) Add a verbose mode -D which set a set -x to see what
   the SDK installer is doing.

2) Add a mode -S to save the relocation scripts for the purpose
   of debugging them in conjunction with -D

3) Add a mode -R to not execute the relocation scripts for the
   purpose of debugging the relocations.

(From OE-Core rev: 0e6dd19b9736d2a8ae7c0f0ab124337d579b8f06)

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

relocate_sdk.py: Fix corruption of sdk binaries

There are two cases of corruption that the relocate_sdk.py was not correctly
dealing with.

1) SDK Extras should be left alone
   Extra external binaries included in an SDK that were linked against the
   host's version of /usr/lib/ld-so.so should not get a relocation applied.
   In the case that was discovered these were LSB compliant binaries that
   already worked on many hosts.

2) If the interp section is too small generate an error
   In the case of the qemu user code, it was using its own .ld file
   to link the executables which overrides the default in the nativesdk
   binutils.  This generated host executables which had a interp section
   that was too small to relocate.

   Now the relocate_sdk.py will print an error and continue on such that
   the error can be fixed by a developer without having to do the
   difficult task of debugging why it is crashing or not loading correctly.

(From OE-Core rev: 3752a9c6d772b39bbe04d62ef4d3527b4c7198c1)

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

oe-git-proxy*: Remove previous git proxy solutions

The new oe-git-proxy should address all git proxying needs, remove
the previous scripts.

V2: Separate the removal of the old scripts into their own patch

(From OE-Core rev: 75738ac47b9ca11daa94820c9c5f829937397da7)

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

oe-git-proxy: Use socat instead of BSD nc

BSD nc was commonly available on the current distros until Fedora 18
appears to have dropped it. socat appears to be a reasonable replacement
with availability on Fedora and Ubuntu and going back some time as well.

Update the script to use the socat syntax.
Simplify the logic a bit by using exec for the no-proxy-needed cases.

(From OE-Core rev: 795b1ea370b8a1d9152c171a50e80bd0b4b8dc60)

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

oe-git-proxy: Add a new comprehensive git proxy script

oe-git-proxy.sh is a simple tool to be used via GIT_PROXY_COMMAND. It
uses BSD netcat to make SOCKS5 or HTTPS proxy connections. It uses
ALL_PROXY to determine the proxy server, protocol, and port. It uses
NO_PROXY to skip using the proxy for a comma delimited list of hosts,
host globs (*.example.com), IPs, or CIDR masks (192.168.1.0/24). It is
known to work with both bash and dash shells.

V2: Implement recommendations by Enrico Scholz:
    o Use exec for the nc calls
    o Use "$@" instead of $* to avoid quoting issues inherent with $*
    o Use bash explicitly and simplify some of the string manipulations
    Also:
    o Drop the .sh in the name per Otavio Salvador
    o Remove a stray debug statement

V3: Implement recommendations by Otavio Salvador
    o GPL license blurb
    o Fix minor typo in comment block

(From OE-Core rev: 62867f56da0e0904f0108f113324c2432659fbac)

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
git-proxy cleanup

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

base.bbclass: Remove generate_git_config()

git no longer supports the use of GIT_CONFIG which defeats the purpose of
GIT_CORE_CONFIG and the generate_git_config() function. Remove it.

(From OE-Core rev: c485322fa2b89eb90efd88969d0c73575f128af7)

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

oe-buildenv-internal: Add upper and lower case proxy vars to BB_ENV_EXTRAWHITE

Applications are inconsistent in their use of upper and lower case proxy
variables. Curl, for example, specifies NO_PROXY (not no_proxy) in the
man page (changed in 2009 [1]). Avoid proxy issues by ensuring both the
upper and lower case versions of each proxy variable are available in
the environment for the fetcher commands.

Add FTPS_PROXY and ftps_proxy to the list as well.

1. http://curl.haxx.se/mail/tracker-2009-04/0012.html

(From OE-Core rev: 684c6512850ceb108e52af634be98eaacb8351e1)

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

oe-buildenv-internal: Remove GIT variables from BB_ENV_EXTRAWHITE

The following variables perform no function outside of bitbake:

    GIT_CONFIG
    GIT_PROXY_HOST
    GIT_PROXY_PORT
    GIT_PROXY_IGNORE

GIT_CONFIG only affects the git-config command which is not relevant to
the fetcher. This was previously used with the OE GIT_CORE_CONFIG
variable which would provide a basic git config to use instead of the
user's config. This usage was deprecated by git for over a year now:

http://git.661346.n2.nabble.com/Overriding-gitconfig-using-GIT-CONFIG-td6680977

GIT_PROXY_HOST and GIT_PROXY_PORT are not used by git.

GIT_PROXY_IGNORE was an OE construct used to create the custom git
config and had no meaning outside of the OE environment. It is not used
by git.

Remove these variables from the fetcher environment.

Users wishing to configure git to work with a proxy should define the
GIT_PROXY_COMMAND environment variable to use an external script.
NO_PROXY can be used within this script to skip the proxy for certain
hosts.

(From OE-Core rev: ea0284a8cc1b531e115b7fdbfa18852f55573f00)

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

qt4: use system SQLite

We've always been depending on external SQLite, however by default Qt
builds using its own internal copy of SQLite. Add the configure option
to actually use the external SQLite library and make it clearer which
version is in use.

Fixes [YOCTO #2514].

(From OE-Core rev: 33e0afd2fffdef4dccfce6383bc646f975972b1e)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gcc-cross-canadian: enable multilib support

(From OE-Core rev: ee7331e3e7d0b38f3e19ccf7e394537f5f653a22)

Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

multilib.bbclass: save multilib variables before executing the gcc-cross-canadian statements

(From OE-Core rev: 45528026c190c7c3b121e9fb65747d050b2bb21a)

Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemd.bbclass: use PACKAGESPLITFUNCS instead of populate_packages_prepend

This is cleaner and leads to more accurate profiles.

(From OE-Core rev: eed7294ba9aedf47af5c64ff11777015e59f48ef)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

fontconfig: rename the patches directory

Rename the patches directory to files as we only have one version of fontconfig,
so the hassle of moving these files every upgrade can be avoided.

(From OE-Core rev: 67a279f517fc43e418482cc104458875264141f6)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

fontconfig: drop explicit -native recipe

Instead, use BBCLASSEXTEND=native in fontconfig.

We can drop the installation of fc-lang/fc-glyphname, they are not used by
fontconfig's build anymore as it ships the generated files in the tarball.

(From OE-Core rev: d5ccc6cbbbdc7502d35ddcbbc2bfc2d4657cbe78)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

fontconfig: remove unexplainable and broken build tweaking

The build flag twiddling in do_configure_append was unexplainable and clearly
wrong (native flags for a cross build), remove it all.

Parallel make appears to be working now, so enable it.

The tarball doesn't contain read only sources, remove the unpack hacking.

The pkgconfig doesn't need patching as the freetype link lines are the same.

Don't need to specify where freetype is, it's found automatically.

Merge fontconfig-util-dbg into fontconfig-dbg.

Don't export HASDOCBOOK, --disable-docs is sufficient to turn off documentation
building.

(From OE-Core rev: ba3db5f5e7055d597b21d8b5f8e60bc3c4f12bd2)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oe/path.py: support missing directory components in realpath()

Some use cases in OE operate on symlinks which dangling path components.
Assume that these are directories instead of raising ENOENT.

(From OE-Core rev: a96e2c84f24c15b77ee1fbc1f998b8b4796b8664)

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package.bbclass: support dangling path components

Commit ec2aab09769f4b6817d74d2175afa2b7c7598750 introduced a regression
on packages which contain symlinks with unresolvable path components
(e.g. lsof-dbg).  While assigning a variable, an exception was raised
and the exception handler accessed this variable.

Patch deals both with the dangling path components by assuming them as
valid directories and by avoiding the broken assignment.

(From OE-Core rev: 579369b0fb27fad6d628746a50b9b798078500f6)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libiconv: Remove RPATH from binaries

Modify libtool to not add RPATH.
This solves https://bugzilla.yoctoproject.org/show_bug.cgi?id=2669

(From OE-Core rev: 273c437813b19577d68fa49ec04ea42154ad70c9)

Signed-off-by: Björn Stenberg <bjst@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

glib-2.0: Fix ptest to build with uclibc.

Only install eglibc-specific dependencies when building for eglibc.
Tweak a test case that won't build with uclibc.

(From OE-Core rev: e28e04e26893416d577ee54e03019c03865e1bf6)

Signed-off-by: Björn Stenberg <bjst@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib: implemented oe.path.realpath()

Various parts of the buildsystem have to work with symlinks. Resolving
them is not trivial because they are always relative to a sysroot
directory.

Patch adds a function which returns the destination of a symlink by
assuming a given path as the / toplevel directory.  A testsuite was
added too.

(From OE-Core rev: 76e0bd7f8e3a3bd052a6e329f88e2d8099e899c4)

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>