staging: lustre: align all code properly for LNet core

In several places in the LNet core the code doesn't align
up properly. This resolves those checkpath issues.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: format properly all comment blocks for LNet core

In several places in the LNet core comment blocks don't follow the
linux kernel style. This patch cleans those problems up.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: drop *_t from end of struct lnet_text_buf

When lnet_text_buf data structure was transform from typedef
to struct the *_t which is typical of typedef was not drop.
This patch removes the *_t to be consistent.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.6b' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

2nd round of new IIO device support, features and cleanups for the 4.6 cycle.

New Device Support
* Apex stx104 DAC
  - new driver for this PC104 board. Right now DAC support only.
* ADI ad5064
  - Add support for ad5625, ad5627, ad5645, ad5665, ad5667 DACs.
  - Add support for Linear Technology ltc2606, ltc2607, ltc2609, ltc2616,
    ltc2617, ltc2619, ltc2626, ltc2627 and ltc2629.
* ADI ad7192
  - add support for the ad7193
* Invensense mpu6050
  - substantial rework of driver to use regmap allowing SPI support extending
    the now split driver to cover the MPU6000.
* TI adc0832
  - new driver supporting ADC0831, ADC0832, ADC0834 and ADC0838 ADCs.
* TI ads1015
  - new driver, note that there is an existing hwmon driver. The long term
    intention is to probably remove the hwmon driver but for now we just have
    guards in place to ensure this driver is not built if that one is enabled.
* TI afe4403
  - new driver for this heart rate monitor / pulse oximeter front end chip.
* TI afe4404
  - new driver for this heart rate monitor / pulse oximeter front end chip.

Staging Graduations
* mxs-lradc
  - A combined general purpose and touch screen (input) device driver.
    Originally held in staging to allow reworking into and MFD but as
    that wasn't happening and isn't an absolute requirement we are moving
    it out of staging.

Driver new features
* ms5611
  - triggered buffer support
  - IIO_CHAN_INFO_SCALE to aid the triggered buffer support.

Driver cleanups / reworks / fixes
* ad5064
  - Use an enum for the register map layout to allow support of additional
    chips (precursor to the new support listed above).
  - Structural driver changes to allow support of the slightly different
    handling for the ltc parts above.
* ad5933
  - drop an exceptional & unnecessary for a function pointer.
* ad7606
  - Cleanup the repeated copies of pm ops.
  - consolidate the various channels specs via a sport of rearranging so only
    one version is needed.
* atlas ph sensor
  - add select IRQ_WORK
* hmc8543 (soon to move out of staging)
  - Comment style fixes
  - functionality of suspend and resume was swapped.
* spear-adc
  - use devm_clk_dev instead of managing the clk lifetime by hand.

Core
* Use new dmaengine_terminate_sync call to avoid a theoretical race.
* Fix docs for mlock in struct iio_dev as it is correctly taken in some
  drivers (docs used to say for core only).
* Add a helper function for calculating the scan index storage size within
  the core cutting out some cut and paste versions of the same code.

iio: adc: Add TI ADS1015 ADC driver support

The driver has sysfs readings with runtime PM support for power saving.
It also offers buffer support that can be used together with IIO software
triggers.

Datasheet can be found here:
http://www.ti.com.cn/cn/lit/ds/symlink/ads1015.pdf

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: Add IIO support for the DAC on the Apex Embedded Systems STX104

The Apex Embedded Systems STX104 is a 16-channel 16-bit analog input and
2-channel 16-bit analog output PC/104 card. The STX104 incorporates a
large one mega-sample FIFO.

This driver provides IIO support for the 2-channel DAC on the STX104.
The base port addresses for the devices may be configured via the "base"
module parameter array.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: imu: inv_mpu6050: Add SPI support for MPU6000

The only difference between the MPU6000 and the
MPU6050 is that the first also supports SPI.
Add SPI driver for this chip.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: imu: inv_mpu6050: Separate driver into core and i2c functionality.

Separate this driver into core and i2c functionality.
This is in preparation for adding spi support.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: imu: inv_mpu6050: Use regmap instead of i2c specific functions

Use regmap instead of i2c specific functions.
This is in preparation of splitting this driver into core and
i2c specific functionality.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Acked-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: imu: inv-mpu6050: Fix interrupt pin configuration

The select/deselect_bypass duo writes the irq number into the interrupt
configuration register.
If there is a i2c slave device connected to the mpu (eg. a magnetometer)
then this can hinder interrupt delivery for the accelerometer and
gyroscope.
Set this register to the default configuration.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: fsl-mc: Remove unneeded parentheses

Remove unneeded parentheses on the right hand side of assignment
statements.
Semantic patch:

@@
expression a, b, c;
@@

(
  a = (b == c)
|
  a =
- (
  b
- )
)

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: Remove unneeded parentheses

Remove unneeded parentheses in assignment statements.
Semantic patch:

@@
expression a, b, c;
@@

(
  a = (b == c)
|
  a =
- (
  b
- )
)

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: emxx_udc: Remove parentheses around the right hand side of assignment

Remove parentheses around the right hand side of assignments as they are
not needed. Semantic patch used:

@@
expression a, b, c;
@@

(
  a = (b == c)
|
  a =
- (
  b
- )
)

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: prefer using eth_broadcast_addr()

Prefer using the eth_broadcast_addr() instead of memset to broadcast
address 0xFF to the array.

Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix signal strength indication

RTL8188E can only have a maximum of 2 chains so match that in the actual
phy_rx_agc_info structure within phy_status_rpt.  This will cause the
other data received from the PHY, such as signal strength indication of
beacons, to properly align and allow extraction and use within the
signal strength record-keeping mechanisms.

Signed-off-by: Andrew Bradford <andrew@bradfordembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: add release_firmware() between request_firmware and function error exit

Small memory leak fixed.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove pfirmware and fwsize of the hal_data_8188e structure

The pfirmware is used only in rtl88eu_download_fw function
(except the kfree(rtlhal->pfirmware) in netdev_close).

The fwsize not used after initialization at all.

The pfirmvare replaced by fw_data and fwsize removed.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove _rtl88e_fill_dummy

The _rtl88e_fill_dummy function replaced by memset in rtl88eu_download_fw.

More appropriate names are used for pfwdata and fwsize variables
(download_data and download_size respectively).

Also u32 replaced by size_t for download_size variable.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unnecessary pointer cast

Remove unnecessary pointer cast. Issue found using the following Coccinelle semantic patch.

@@
type T;
T e;
identifier x;
@@

* T x = (T)e;

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Use ARRAY_SIZE macro for sizes of arrays

Use ARRAY_SIZE to calculate the size of an array to make code concise.
The semantic patch used can be found here:
https://github.com/coccinelle/coccinellery/commit/9cbab452a3a2e18439e8386d6c4a68ee42c3ee2b

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6655: Add check dma_mapping_error

This patch checks for dma_mapping_error() after using dma_map_single.
If the dma map fails we release skb buff allocated by dev_alloc_skb() to
avoid possible causes of resource leak.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: replace explicit NULL comparison with ! operator

Replace explicit NULL comparison with ! operator to simplify code.

Found with Coccinelle:
@@
expression e;
statement s0, s1;
@@

if (
(
+ !
e
- == NULL
 || ...
)
 ) s0 else s1

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: Remove unneeded parentheses

Remove parentheses around the right hand side of assignment statements
as they are not needed.
Semantic patch:

@@
expression a, b, c;
@@

(
  a = (b == c)
|
  a =
- (
  b
- )
)
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: compress return logic into one line

Simplify function returns by merging assignment and return into
one command line.
Found with Coccinelle
@@
expression e, ret;
@@

-ret =
+return
e;
-return ret;

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: compress return logic into one line

Simplify function return by merging assignment and return into
one command line. Remove (now) unused local variable.

Found using Coccinelle:
@@
expression e, ret;
@@

-ret =
+return
e;
-return ret;

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: Eliminate commented out code

This patch removes commented out code as it contributes to code clutter.

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Remove blank line after '{' brace

Omit the whitespace after '{' brace as suggested by checkpatch.

CHECK: Blank lines aren't necessary after an open brace '{'

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Add blank line after function declaration

Insert the required whitespace after the function declaration as
suggested by checkpatch.

CHECK: Please use a blank line after function/struct/union/enum
declarations

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Indent to match open parenthesis

Fix alignment issues by properly indenting function parameters in
accordance to the kernel coding style. Checkpatch pointed out this
issue.

CHECK: Alignment should match open parenthesis

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Fix block comments according to kernel coding style

Add the required trailing * on subsequent lines as well as move the */
on a separate line. Checkpatch found this issue.

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of PANEL_HORIZONTAL_TOTAL fields

Use stratight-forward defintion of PANEL_HORIZONTAL_TOTAL register fields
and use open-coded implementation for register manipulations

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for I2C_STATUS fields

Replace complex definition of I2C_STATUS register fields with BIT() macro
and use open-coded implementation for register manipulation

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for I2C_CTRL fields

Replace complex definition of I2C_CTRL register fields with BIT() macro and
use open-coded implementation for register manipulation

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of CRT_DISPLAY_CTRL multi-bit fields

Use more straight-forward definitions for multi-bit fields of
CRT_DISPLAY_CTRL register and use open-coded implementation for register
manipulation

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for CRT_DISPLAY_CTRL single-bit fields

Replace complex definition of CRT_DISPLAY_CTRL register fields with
BIT() macro and use open-coded implementation for register manipulation

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for DMA_ABORT_INTERRUPT single-bit fields

Replace complex definition of DMA_ABORT_INTERRUPT register fields with
BIT() macro and use open-coded implementation for register manipulation

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of PANEL_PLANE_BR fields

Use stratight-forward defintion of PANEL_PLANE_BR register fields and
use open-coded implementation for register manipulations

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of PANEL_PLANE_TL fields

Use stratight-forward defintion of PANEL_PLANE_TL register fields

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of PANEL_WINDOW_HEIGHT fields

Use stratight-forward defintion of PANEL_WINDOW_HEIGHT register fields and
use open-coded implementation for register manipulations

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of PANEL_WINDOW_WIDTH fields

Use stratight-forward defintion of PANEL_WINDOW_WIDTH register fields and
use open-coded implementation for register manipulations

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of PANEL_FB_WIDTH fields

Use stratight-forward defintion of PANEL_FB_WIDTH register fields and use
open-coded implementation for register manipulations

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of PANEL_FB_ADDRESS fields

Use BIT() macro for single-bit fields of PANEL_FB_ADDRESS register and
define PANEL_FB_ADDRESS_ADDRESS_MASK for masking the address bits.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of PANEL_DISPLAY_CTRL multi-bit fields

Use more straight-forward definitions for multi-bit fields of
PANEL_DISPLAY_CTRL register and use open-coded implementation for register
manipulation

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove PANEL_DISPLAY_CTRL_TFT_DISP defines

The PANEL_DISPLAY_CTRL_TFT_DISP definitions artificially encode
PANEL_DISPLAY_CTRL_DUAL_DISPLAY and PANEL_DISPLAY_CTRL_DOUBLE_PIXEL bits
combinations. Replace the PANEL_DISPLAY_CTRL_TFT_DISP usage with direct use
of the bits defined in the datasheet.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for PANEL_DISPLAY_CTRL single-bit fields

Replace complex definition of PANEL_DISPLAY_CTRL register fields with BIT()
macro and use open-coded implementation for register manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: hw_sm750_setBLANK: reduce printk verbosity

pr_debug would be enough

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: refactor setDisplayControl function

The enable/disbable sequence in setDisplayControl function is duplicated
for primary and secondary display controllers. The function can be
refactored so that the common part of register access will be shared for
both controllers.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: merge reserved bits of PANEL/CRT_DISPLAY_CTRL registers

Use single mask for reserved bits in PANEL_DISPLAY_CTRL and
CRT_DISPLAY_CTRL registers.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: share common bits in display control registers

The display control registers for primary and secondary display share some
of the bits and those bits can be defined in a single place and then used
for manipulations of the relevant registers.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: setDisplayControl: rename local vairables

Remove HungarianCamelCase notation.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: programModeRegisters: rename local vairables

Remove HungarianCamelCase notation.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of VGA_CONFIGURATION multi-bit field

Use more straight-forward definitions for multi-bit field of
VGA_CONFIGURATION register.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for VGA_CONFIGURATION single-bit fields

Replace complex defintion of VGA_CONFIGURATION register fields with BIT()
macro and use open-coded implementation for VGA_CONFIGURATION
manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: drop redundant defines for PLL_CTRL fields

The PLL_CTRL fields have common defines for several PLL control
registers and re-defining the same values per register is not needed.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change defintion of PANEL_PLL_CTRL multi-bit fields

Use more straight-forward definitions for multi-bit field of
PANEL_PLL_CTRL register and use open-coded implementation for register
manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for PLL_CTRL single-bit fields

Replace complex defintion of PLL_CTRL fields with BIT() macro and use
open-coded implementation for PLL register manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use PLL_CTRL_POWER defines for CRT_PLL_CTRL

Use PLL_CTRL_POWER definitions for CRT_PLL_CTRL register access

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: rename PANEL_PLL_CTRL_* fields to PLL_CTRL_*

Several PLL control registers have the same layout and therefore the
field definitions may be shared for those registers. Renaming
definitions of PANEL_PLL_CTRL_* fields to more generic PLL_CTRL_* will
allow reusing these definitions for other PLL control registers.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: formatPllReg: fix comment formatting

Fix comment alignment and formatting to follow kernel coding style

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: formatPllReg: rename ulPllReg to reg

Remove HungarianCamelCase notation

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: convert to wait_event_interruptible_timeout

This patch makes use of wait_event_interruptible_timeout to achieve
timeout functionality.This is a TODO mentiond in the comment which is also
removed.It also aligns with what the function is supposed to do as in the
comments.

Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Align #define constants

Aligning the constants in the macros improves code readability.

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: Remove unneeded parentheses

Remove unneeded parentheses around the right hand side of assignments as
they are not needed. Semantic patch:

@@
expression a, b, c;
@@

(
  a = (b == c)
|
  a =
- (
  b
- )
)

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: Remove unnecessary blank lines

This patch removes unnecessary blank lines after { and before }.
Found using checkpatch.pl.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: Remove space after type cast

This patch removes unnecessary space after type casts.
Found using checkpatch.pl.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: Prefer using the BIT macro

Replace all instances of bit shifting on 1 with the BIT(x) macro. In
addition, convert other non-1 shift operations with the equivalent
BIT(x) macro for uniformity. Issue pointed out by checkpatch.

CHECK: Prefer using the BIT macro

Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: Use ARRAY_SIZE for sizes of arrays

Use ARRAY_SIZE to calculate the size of an array to make code concise.
The semantic patch used can be found here:
https://github.com/coccinelle/coccinellery/commit/9cbab452a3a2e18439e8386d6c4a68ee42c3ee2b

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi.h: remove SDF_MODE0 etc.

The macros `SDF_MODE0`, `SDF_MODE1`, `SDF_MODE2`, `SDF_MODE3`, and
`SDF_MODE4` are COMEDI subdevice flags originally associated with the
obsolete (and no longer present) COMEDI "trigger" functionality.  They
have been of no use since COMEDI release 0.7.61 back in November 2001.
Since they were going spare, a couple of them have been aliased as
`SDF_PWM_COUNTER` and `SDF_PWM_HBRIDGE` to mean other things.  Remove
the obsolete macros and redefine `SDF_PWM_COUNTER` and `SDF_PWM_HBRIDGE`
as equivalent numeric values.

Some code distributed with the userspace COMEDILIB library uses the
`SDF_MODE0` etc. flags to display the fact that they are set, but
COMEDILIB uses and installs its own, compatible version of "comedi.h"
anyway so isn't affected by their removal from the kernel copy.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi.h: remove struct comedi_trig

Remove `struct comedi_trig` and some associated macros, `TRIG_DITHER`,
`TRIG_DEGLITCH`, `TRIG_CONFIG`, and ioctl code `COMEDI_TRIG`.  These
have been obsolete since COMEDI release 0.7.61 back in November 2001.

The userspace COMEDILIB library still has some deprecated code that
may attempt to use these, but it uses its own, compatible version of
"comedi.h", so isn't affected by their removal from the kernel copy.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi.h: add kernel-doc comments to struct types

Add "kernel-doc"-formatted comments to the COMEDI `struct` declarations
used with ioctls.  Don't bother documenting `struct comedi_trig` as it
is obsolete and not supported.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi.h: add kernel-doc to common enums

Add "kernel-doc"-formatted comments to COMEDI's general-purpose `enum`
type declarations.  Don't bother documenting the low-level
driver-specific ones for now.

Move the declaration of `enum comedi_counter_status_flags` next to the
other general-purpose `enum` types.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi.h: tweak start of header comment

The wording at the start of the header comment is a bit misleading,
particularly the part in parentheses: "(installed as
/usr/include/comedi.h)".  This version of "comedi.h" certainly won't be
installed as that pathname.  Fix it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: refactor rgmii 10 mbps preamble error checking

Refactor RGMII 10 Mbps preamble error checking. The current implementation
does not work correctly in phydev mode since only the link status changes
trigger the callback, and if we stay on 10 Mbps operation the periodic
checks for error counters are never done.

Provide a periodic worker also during the phydev operation, and notify
the link status changes through the phydev instead of the inband
status change interrupt. This also has the benefit that we don't need
to use legacy CVMX MDIO calls to check the PHY state, and we can avoid
races that trigger bogus "Using 10Mbps with software preamble removal"
logs when interfaces are being bringed up. It also avoids some corner-case
crashes when the in-band interrupt triggers while the interface is
being taken down.

Tested on EdgeRouter Lite & D-Link DSR-1000N.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Remove unneeded parentheses in assignment

Remove parentheses around the right hand side of assignments as they are
not needed. Semantic patch used:

@@
expression a, b, c;
@@

(
  a = (b == c)
|
  a =
- (
  b
- )
)

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Add spaces around operators

Add spaces around operators for better readability. Change suggested by
checkpatch.

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: return proper error

We were returning ENOMEM on all types of errors. Lets return the actual
error code. At the same time remove the label which became unused as a
result of this patch.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: return error value

On error we were returning retval, but retval is not having the error
value. We will get the error value using PTR_ERR.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Modify boolean assignment

Boolean variables should be assigned true/false rather than 1/0.
This patch makes a correction on such a variable which has boolean
values assigned in all other places within the file.

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove parentheses around right hand side of assignment

Remove parentheses on the right hand side of assignment as they are not
needed. Semantic patch used:

@@
expression a, b, c, d;
@@

(
  a = (c == d)
|
  a =
- (
  b
- )
)
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove unnecessary goto

parser_param_start() had a goto Away, which went to nothing but
a return statement. Remove the goto, the CamelCased label, and
just return directly.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix else statement in visornic_main.c

This patch fixes the following types of check patch warnings:
else is not generally useful after a break or return

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix comments in visornic_main.c

This patch fixes the following types of check patch warnings:
Block comments use * on subsequent lines
Block comments use a trailing */ on a separate line

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix block comments in ultrainputreport.h

This patch fixes the following types of check patch warnings:
Block comments use * on subsequent lines
Block comments use a trailing */ on a separate line

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix comments in visorbus_main.c

This patch fixes the following types of check patch warnings:
Block comments use a trailing */ on a separate line
Comment alignments

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix spaces after cast visorchipset.c

This patch fixes checkpatch's no space is necessary after a cast

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix blank lines in visorchipset.c

this patch removes the following checkpatch warnings:
please use a blank line after …
Please don’t use multiple blank lines

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix comparison to NULL in visorchipset.c

This patch fixes the following type of check patch warnings:
Comparison to NULL could be written

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix spacing in visorchipset.c

This patch fixes the following checkpatch warning:
spaces preferred around that ‘*’ or ‘|’

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix comments in visorchipset

This patch fixes all the Block comments by using a trailing */
on a separate line

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix trailing comment in vbusdeviceinfo.h

Fixes checkpatch trailing */ comment in vbusdeviceinfo.h

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Fix NULL comparison vbusdeviceinfo.h

This patches resolves the NULL comparison checkpatch warnings

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix comments for controlvmchannel.h

This patch simply fixes all trailing */ by modifying the comments
structures while trying to reduce the total number of lines

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Fix guestlinuxdebug.h comments

This patch simply cleans up all checkpatch comment issues

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: Remove parentheses on the right hand side of assignment

Remove parentheses on the right hand side of assignment as they are not
needed. Semantic patch used:

@@
expression a, b, c, d;
@@

(
  a = (c == d)
|
  a =
- (
  b
- )
)
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8*: fix my email address up

For some reason I had an old linux.com address in these TODO files,
point to my linuxfoundation.org address as that works properly here.

Reported-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: spelling corrections

This patch fixes spelling warnings generated by checkpatch.pl

Signed-off-by: Roger H. Newell <newell.roger@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Remove unneeded parentheses in assignment

Remove parentheses around the right hand side of assignments. They are
unnecessary.
Semantic patch:

@@
expression a, b, c;
@@

(
  a = (b == c)
|
  a =
- (
  b
- )
)

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove parentheses on right hand side of assignment

Remove the unnecessary parens on right hand side of assignment.

Found using Coccinelle:
@@
identifier x;
expression e1, e2;
@@
- x = (e1 << e2)
+ x = e1 << e2

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename counter in wilc_send_config_pkt

This patch renames the name of counter variable to i.
This change makes more readability because wilc_send_config_pkt has a
similar argument name as count.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove initialization code of counter variable

There is no need to set to 0 for counter variable before entering next
for-loop statement because counter is initialized again in for-loop
statement, so just remove it.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>