Evoke Zhang [Wed, 20 Mar 2019 10:54:47 +0000 (18:54 +0800)]
lcd: add mipi-dsi support for sm1 [2/2]
PD#SWPL-6114
Problem:
add mipi-dsi support for sm1
Solution:
add lcd_chip_sm1
Verify:
verify by S905x3
Change-Id: I1b95676ad1300f8cbf859f89b557f680cccff117
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Xing Wang [Wed, 20 Mar 2019 14:44:51 +0000 (22:44 +0800)]
audio: auge: add sound card for sm1 [2/2]
PD#SWPL-6151
Problem:
sound card for sm1
Solution:
add sound card for sm1
Verify:
ac200
Change-Id: I4f65472af7a8399fb6fe003db608158e11bed566
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
ruixuan.li [Wed, 20 Mar 2019 16:21:10 +0000 (00:21 +0800)]
sm1: emmc run hs200 busmode [1/1]
PD#SWPL-5404
Problem:
emmc report data crc error in hs200 busmode
Solution:
set hs200 co_phase to 2 and did not reset the
hs200 co_phase and tx_phase when adjust tuning is
find the error point in sm1
Verify:
verify pass on sm1_s905d3_ac200
Change-Id: I56aa8eb666fb55641db75878a3488f66c721bd6d
Signed-off-by: ruixuan.li <ruixuan.li@amlogic.com>
Tao Guo [Wed, 16 Jan 2019 09:11:54 +0000 (17:11 +0800)]
debug: add atrace support [1/1]
PD#SWPL-4956
Problem:
Need atrace to debug multimedia issue
Solution:
Add atrace functions
Verify:
P212
Change-Id: Ieee441fc75b6f83e8e8a22350a402ec7e77f1134
Signed-off-by: Tao Guo <tao.guo@amlogic.com>
Xing Wang [Wed, 20 Mar 2019 14:11:44 +0000 (22:11 +0800)]
dts: sm1: add sound card config [1/2]
PD#SWPL-6151
Problem:
sound card for sm1
Solution:
add sound card for sm1
Verify:
ac200
Change-Id: I1de0cfe1748d401ab0e21b0a244def37b277b1ff
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Qiang Li [Wed, 20 Mar 2019 15:21:45 +0000 (23:21 +0800)]
dts: sm1: dts enable sdio node. [1/1]
PD#SWPL-5409
Problem:
dts sdio node disable.
Solution:
dts enable sdio node.
Verify:
SM1_AC200
Change-Id: Ifd33de0f08adb202af07eee13db8894fdf0c77fa
Signed-off-by: Qiang Li <qiang.li@amlogic.com>
ruixuan.li [Wed, 20 Mar 2019 11:06:24 +0000 (19:06 +0800)]
sm1: modify 400k co_phase [1/1]
PD#SWPL-5404
Problem:
emmc report response crc error in high speed mode
Solution:
modify 400k co_phas
Verify:
verify on ac200
Change-Id: I8bd0cbeb121e7a35a5f96791449187150e650d9e
Signed-off-by: ruixuan.li <ruixuan.li@amlogic.com>
Nian Jing [Wed, 20 Mar 2019 03:26:28 +0000 (11:26 +0800)]
cvbs: add cvbs support for sm1 [1/1]
PD#SWPL-6112
Problem:
need add cvbsout support for sm1
Solution:
add cvbsout support for sm1
Verify:
sm1
Change-Id: I037fbdb41b823d9ef93a9069f3798f8d38ac5796
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Yi Zhou [Mon, 18 Mar 2019 08:53:42 +0000 (16:53 +0800)]
dv: dv bringup for sm1 [1/1]
PD#SWPL-5408
Problem:
dv bringup for sm1
Solution:
dv bringup for sm1, add chip id
Verify:
sm1 ptm
Change-Id: Ifbf175cb5c495949f5e4bd02b98690f08239a735
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Shunzhou Jiang [Wed, 20 Mar 2019 07:33:25 +0000 (15:33 +0800)]
clk: sm1: add clk measure driver [1/2]
PD#SWPL-5407
Problem:
sm1 support clk measure
Solution:
support clk measure
Verify:
ac200
Change-Id: I43c74375c16fee73037a1df4e4531c429e1229fd
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Shunzhou Jiang [Tue, 19 Mar 2019 07:13:53 +0000 (15:13 +0800)]
clk: sm1: add clk measure driver [2/2]
PD#SWPL-5407
Problem:
sm1 support clk measure
Solution:
support clk measure
Verify:
ac200
Change-Id: If87c7c0bc53c8e2bcbf58a685f9ef7ac75462a70
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Brian Zhu [Tue, 19 Mar 2019 16:13:20 +0000 (00:13 +0800)]
vpp: sm1: add vpp and sr support [1/1]
PD#SWPL-6101
Problem:
Need vpp and sr supprt for sm1
Solution:
add support for sm1
Verify:
test pass on sm1 ac200
Change-Id: I038ceba52a0b47512767e851d0047a3ee36e351c
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Yue Wang [Wed, 20 Mar 2019 07:24:46 +0000 (15:24 +0800)]
usb: modify usb dts for sm1 [1/1]
PD#SWPL-5385
Problem:
SM1 bring up
Solution:
modify usb dts for SM1 bringup
Verify:
g12a
Test: pass
Change-Id: Ie6f2925315ce12b3ad2964cf85aa3f4cee4bf2a7
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Nanxin.Qin [Wed, 20 Mar 2019 07:46:56 +0000 (15:46 +0800)]
dts: update chip name. [2/2]
PD#SWPL-5261
Problem:
update chip name.
Solution:
the chip name used for media modules.
Verify:
AC200
Change-Id: I229ca3f991b29fdebf10f98dff5173768b910aaa
Signed-off-by: Nanxin.Qin <nanxin.qin@amlogic.com>
zhiqiang liang [Wed, 20 Mar 2019 07:00:40 +0000 (15:00 +0800)]
cpu: add the cpuid check interface [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
add the cpuid check interface
Verify:
AC200
Change-Id: Ifa7dd8fb0b6ec621411652acf6b799e69c4069b7
Signed-off-by: zhiqiang liang <zhiqiang.liang@amlogic.com>
Pengcheng Chen [Wed, 20 Mar 2019 02:36:09 +0000 (10:36 +0800)]
osd: add osd SM1 feature [1/1]
PD#SWPL-6106
Problem:
bring up osd for SM1
Solution:
add osd SM1 feature
Verify:
Verified on SM1-AC200
Change-Id: I5cba13f7539e48f6cba1ca0fb3abcaad2ba8494d
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Qianggui Song [Fri, 8 Mar 2019 07:52:57 +0000 (15:52 +0800)]
pinctrl: add extra pins for sm1 base on g12b [1/1]
PD#SWPL-5405
Problem:
sm1 add some new pins base on g12b, pinmux need update.
Solution:
update extra pins to g12b pinmux.
Verify:
pxp
Change-Id: Idbdddb1e64ffb4e5a63ee3a69b5fc40e7ecfcc44
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Qiang Li [Wed, 20 Mar 2019 03:15:04 +0000 (11:15 +0800)]
sdcard: sm1: fix dts problem. [2/2]
PD#SWPL-5409
Problem:
dts compile error.
Solution:
delect sd_emmc_b2 node.
Verify:
SM1_AC200
Change-Id: Ib3965a083fdc3f95a5c0a9de37bff98c898d0993
Signed-off-by: Qiang Li <qiang.li@amlogic.com>
Jian Cao [Tue, 19 Mar 2019 11:26:04 +0000 (19:26 +0800)]
media: add codec support for SM1 [1/1]
PD#SWPL-2867
Problem:
bringup codec for SM1.
Solution:
add the register ops for SM1
Verify:
Verified on SM1-AC200
Change-Id: I31db8f0b5816d67664e8161b3dc73574909afe31
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
ruixuan.li [Tue, 19 Mar 2019 08:54:38 +0000 (16:54 +0800)]
sm1: disable emmc calc_f methods [1/1]
PD#SWPL-5404
Problem:
sm1 usb fixdiv mode set adjust cause error
Solution:
disable emmc calc_f in dtsi.
Verify:
test pass on sm1 ac200
Change-Id: I4459bf4faa2141a9e684b1e5bb95fb806eecbbfa
Signed-off-by: ruixuan.li <ruixuan.li@amlogic.com>
Qiang Li [Tue, 19 Mar 2019 06:44:14 +0000 (14:44 +0800)]
sdcard: sm1: add sdcard support. [1/2]
PD#SWPL-5409
Problem:
sm1 sdcard failed.
Solution:
change sm1 sdcard high speed mode co_phase.
Verify:
SM1_AC200
Change-Id: I295c6fac2594e611bf278f83a97bb503fb8bb13b
Signed-off-by: Qiang Li <qiang.li@amlogic.com>
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Evoke Zhang [Tue, 19 Mar 2019 04:38:30 +0000 (12:38 +0800)]
vpu: fix mem_pd reg addr mistake [1/1]
PD#SWPL-5857
Problem:
vpu_mem_pd register address changed
Solution:
update vpu_mem_pd register address for sm1
Verify:
pxp
Change-Id: Iefcb190b40a5ac949351a4c88bea502e437cd59f
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Huan Biao [Tue, 19 Mar 2019 07:53:11 +0000 (15:53 +0800)]
thermal: dts: enable sm1 thermal [1/1]
PD#SWPL-6071
Problem:
enable thermal for sm1
Solution:
enable thermal for sm1
Verify:
test pass on sm1_skt
Change-Id: I54fd4431bec1a48135da0b0b9c05cd53d4055a56
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
Evoke Zhang [Thu, 14 Mar 2019 04:30:44 +0000 (12:30 +0800)]
vpu: add vpu support for sm1 [1/1]
PD#SWPL-5857
Problem:
sm1 is a new chip
Solution:
add sm1 support for vpu driver
Verify:
pxp
Change-Id: I88966a26fb4f8f90620081c4d9a86ad21a6e03fc
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
zhiqiang liang [Mon, 18 Mar 2019 14:50:37 +0000 (22:50 +0800)]
dts: modify the dts for skt and ac200 board [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
modify the dts for skt and ac200 board
Verify:
AC200
Change-Id: I5e5d52329d7a190ad2b4bd967be837b4ae91ea11
Signed-off-by: zhiqiang liang <zhiqiang.liang@amlogic.com>
zhiqiang liang [Mon, 18 Mar 2019 13:01:31 +0000 (21:01 +0800)]
dts: add the chipid for sm1 bringup [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
add the chipid
Verify:
PxP
Change-Id: I7164a4fff39932f81de1b5c4404f1ad0d878484c
Signed-off-by: zhiqiang liang <zhiqiang.liang@amlogic.com>
Jianxiong Pan [Mon, 18 Mar 2019 06:53:06 +0000 (14:53 +0800)]
dts: sm1: add sm1_s905d3_ac200 and sm1_s905d3_skt dts. [1/1]
PD#SWPL-5865
Problem:
add sm1 dts.
Solution:
copy from g12a_s905d2_u200.dts.
Verify:
no.
Change-Id: Idcd997d2c1a52a247c55ad41b557941314dfcb2c
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Shunzhou Jiang [Wed, 6 Mar 2019 06:10:20 +0000 (14:10 +0800)]
clk: sm1: add clk driver [1/1]
PD#SWPL-5407
Problem:
sm1 not have clk driver
Solution:
add clk driver
Verify:
PxP
Change-Id: Id48257d88ef200fd4adb309bf2e4ada1be407753
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Yi Zhou [Mon, 4 Mar 2019 10:57:46 +0000 (18:57 +0800)]
hdmitx: hdmitx bringup for sm1 [1/1]
PD#SWPL-5408
Problem:
hdmitx bringup for sm1
Solution:
hdmitx bringup for sm1, add chip id
Verify:
sm1 ptm
Change-Id: I804dec4b743c660b180b7061d110ab76b9ec0468
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
zhiqiang liang [Fri, 15 Mar 2019 07:07:16 +0000 (15:07 +0800)]
dts: add the partition info for sm1 bringup [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
add the partition info
Verify:
PxP
Change-Id: I779369d92780f9380cb634a90cabb012df11859d
Signed-off-by: zhiqiang liang <zhiqiang.liang@amlogic.com>
Jiyu Yang [Wed, 13 Mar 2019 02:30:06 +0000 (10:30 +0800)]
dts: use mesong12a-bifrost instead [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
commit dts for SM1 bringup
Verify:
PxP
Change-Id: Ifdbc751e2fa9ecb3d747c114ac820ab60021294d
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
zhiqiang liang [Wed, 13 Mar 2019 03:14:11 +0000 (11:14 +0800)]
dts: modify dts for SM1 bringup with SMP [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
modify dts for SM1 bringup with smp
Verify:
PxP
Change-Id: Ie83ad7434acfb8c6232a8e373dfc63ef0ba9b87e
Signed-off-by: zhiqiang liang <zhiqiang.liang@amlogic.com>
zhiqiang liang [Tue, 12 Mar 2019 07:20:22 +0000 (15:20 +0800)]
dts: rename dts for SM1 bringup [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
rename dts for SM1 bringup
Verify:
PxP
Change-Id: I991b6a0fb65cf9a03c6cb75a1ad8823a067e6bdd
Signed-off-by: zhiqiang liang <zhiqiang.liang@amlogic.com>
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
zhiqiang liang [Mon, 11 Mar 2019 11:46:30 +0000 (19:46 +0800)]
dts: commit dts for SM1 bringup [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
commit dts for SM1 bringup
Verify:
PxP
Change-Id: Id117d7ff130c67feb8ca04657d8a4ad463793fed
Signed-off-by: zhiqiang liang <zhiqiang.liang@amlogic.com>
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
zhiwei.yuan [Tue, 19 Mar 2019 03:07:42 +0000 (11:07 +0800)]
dtv_demod: add AGC control for board t309 [1/1]
PD#SWPL-5175
Problem:
r842 agc control need be controlled by demod
Solution:
add agc control function
Verify:
verified by t962x2_x301 t962x2_t309
Change-Id: If712e22276b97c457e2e2ed1c79bdf3673813dff
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Bencheng Jing [Thu, 21 Mar 2019 14:45:16 +0000 (22:45 +0800)]
amvecm: dnlp new c curve and interface [1/4]
PD#SWPL-5338
Problem:
dnlp new c curve and interface
Solution:
dnlp new c curve and interface
Verify:
x301
Change-Id: I7a221b6c5546873ebc3c3182d4856d57ffc3df48
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Bencheng Jing [Fri, 22 Feb 2019 05:29:34 +0000 (13:29 +0800)]
amvecm: add ioctrl interface for hdr type. [1/1]
PD#TV-1592
Problem:
no interface to get hdr type
Solution:
add ioctrl interface for hdr type
Verify:
tl1
Change-Id: Ib7781fa8c924cbd7721b592acb18d3b834a04f06
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Nian Jing [Tue, 26 Mar 2019 09:35:49 +0000 (17:35 +0800)]
tvafe: fix vertical stripes for tl1 [1/1]
PD#SWPL-6349
Problem:
av vertical stripes on colobar
Solution:
fix vertical stripes
Verify:
verify on x301
Change-Id: I590f2b1da9b9a8f36973b00973b70a1c1c9dfb9e
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Yong Qin [Mon, 25 Mar 2019 13:01:15 +0000 (21:01 +0800)]
vlock: pretect display pll set in vlock [1/1]
PD#TV-3683
Problem:
1.pretect display pll set in vlock, m and frac value
write at the sametime.
Solution:
1.optmis vlock flow
2.add notify_callback when mode change
Verify:
tl1
Change-Id: I72fab117c5b7247659c5c08eeff62fbc4d421839
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
shaochan.liu [Tue, 26 Mar 2019 03:27:02 +0000 (11:27 +0800)]
lcd: supposed vlock_m and vlock_farc interface [1/1]
PD#TV-3683
Problem:
Repeatedly exit HDMI channel cause black screen
Solution:
1, support vlock_m and vlock_frac interface
2, optimized clk change and de timing
Verify:
verify on t962x2-x301
Change-Id: Iddedade08300290853e59b026b3ca1b9939eed79
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
Yong Qin [Tue, 26 Mar 2019 09:01:44 +0000 (17:01 +0800)]
di: monkey test di cause crash [1/1]
PD#SWPL-6133
Problem:
monkey test di cause crash,when is di reg processing, unreg event
attach, and released the di buffer, so cause crash.
Solution:
every unreg event received, need waitting reg process had done.
Verify:
tl1
Change-Id: I2f2bb068ed65ab14ab4f09de96b64d7290da5914
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Xiaoming Sui [Tue, 26 Mar 2019 14:06:04 +0000 (22:06 +0800)]
tsync: reduce the log information [1/1]
PD#SWPL-6152
Problem:
in some special cases, there are many sync
log information from serial port.
Solution:
remove this log and add pts realign.
Verify:
X301
Change-Id: I81d1753ef6d4e6c1e39d6c7f38eb3836e07be05d
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
Nian Jing [Fri, 15 Mar 2019 11:20:40 +0000 (19:20 +0800)]
tvafe: add control for tvconfig snow config [1/1]
PD#SWPL-5985
Problem:
display snow when snow config disabled
Solution:
add control for tvconfig snow config
Verify:
verify it on x301
Change-Id: I3466efc98577f2403f3a6cd638ad7dbf70ce34dc
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Pengcheng Chen [Thu, 28 Mar 2019 08:02:18 +0000 (16:02 +0800)]
gdc: add gdc dmabuf 32bit compatible [2/2]
PD#SWPL-5685
Problem:
gdc dmabuf not work under 32bit
Solution:
add gdc dmabuf 32bit compatible
Verify:
verified by w400
Change-Id: If26f41ff6cd679dc0220771f5bb2b50eba899aa9
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Pengcheng Chen [Thu, 28 Mar 2019 07:12:16 +0000 (15:12 +0800)]
ge2d: add ge2d dmabuf 32bit compatible [1/2]
PD#SWPL-5685
Problem:
ge2d dmabuf not work under 32bit
Solution:
add ge2d dmabuf 32bit compatible
Verify:
verified by w400
Change-Id: I03011620fc67cdaf251f5ca1c7b0b512a8fc9a76
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Pengcheng Chen [Thu, 21 Mar 2019 10:44:56 +0000 (18:44 +0800)]
gdc: change dma_buf to cacheable [2/2]
PD#SWPL-5685
Problem:
gdc output dmabuf have high variance
Solution:
change dma_buf to cacheable
Verify:
verified by w400
Change-Id: Ide8cea975c7dd39bb9185fbb9ba0694d859c74e6
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Pengcheng Chen [Thu, 21 Mar 2019 09:33:13 +0000 (17:33 +0800)]
ge2d: change dma_buf to cacheable [1/2]
PD#SWPL-5685
Problem:
ge2d output dmabuf have high variance
Solution:
change dma_buf to cacheable
Verify:
verified by w400
Change-Id: Iff9356dd256ce69bd87e7e5a2b1feb9e74c49744
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Jiamin Ma [Wed, 27 Mar 2019 10:32:44 +0000 (18:32 +0800)]
cpu_affinity: restore the original cpu affinity correctly [1/1]
PD#SWPL-5595
Problem:
set_cpus_allowed_ptr(current, cpu_all_mask) is always errorly
called to retore CPU affinity for current task. In some cases,
the current may be a bounded kworker thread, and we should not
set its CPU affinity to all CPUs
Solution:
Save the original CPU affinity and restore it
Verify:
W400 revB
Change-Id: I3cd65e79791563af9dacc09639b8645b97979c44
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
Brian Zhu [Wed, 20 Mar 2019 17:15:54 +0000 (01:15 +0800)]
vpp: add black_threshold to disable video when window is too small [1/1]
PD#TV-3641
Problem:
Add new interface to disable video when window is too small
Solution:
Add the black_threshold interface to control the threshold size.
And set the default value is width=20, height=30.
Verify:
verified by x301
Change-Id: Ifeb376c2e2edbb5706b2cdc2d08421bd0086b01e
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Yi Zhou [Mon, 25 Mar 2019 11:19:26 +0000 (19:19 +0800)]
hdmitx: fix flash screen when resuming and playing hdr [1/1]
PD#SWPL-6169
Problem:
when resuming and playing hdr films, flash screen will happen
under LG TV
Solution:
quantization range has changed between UI and playing hdr
films. we keep quantization unchanged. Same as MTK.
Verify:
s905x2
Change-Id: I071abecfba705dbd44d33c2673d4938c39f419cf
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Evoke Zhang [Mon, 25 Mar 2019 11:49:03 +0000 (19:49 +0800)]
vdin: fix vdin1 dest_cfmt for tl1 afbc preview support [1/1]
PD#SWPL-5971
Problem:
preview window color is green with 1080p & 4k hdmirx
Solution:
vdin1 dest_cfmt follow vdin0 for the software double write for preview
Verify:
x301
Change-Id: I2e45b5f838cddcac1ca1c4e6710a7cc1f45ae9b5
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Hong Guo [Tue, 26 Mar 2019 07:47:49 +0000 (15:47 +0800)]
cpufreq: free clk if failed to set 1G for fixpll when cpufreq init. [1/1]
PD#SWPL-6394
Problem:
free clk if failed to set 1G for fixpll.
Solution:
free clk if failed to set 1G for fixpll..
Verify:
test pass on A311D-W400
Change-Id: I1a7af6fe459c067e34ff8752453a1a04985edb88
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Pengcheng Chen [Mon, 11 Mar 2019 09:48:52 +0000 (17:48 +0800)]
gdc: ge2d: output dma_buf need flush when alloc [1/1]
PD#SWPL-5685
Problem:
gdc output mismatch
Solution:
output dma_buf need flush when alloc
Verify:
verified by w400
Change-Id: Ie206b4f51bd1338420f63e0e06563b67d6d63c88
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Brian Zhu [Tue, 26 Mar 2019 11:13:27 +0000 (19:13 +0800)]
vpp: including crop info when AFBC switch to normal frame [1/1]
PD#SWPL-6347
Problem:
When AFBC switch to normal frame, excluding the crop information, the pps
parameters are calculated with wrong input size.
Solution:
1.Add the crop information, when afbc swicth to normal frame.
2.check ratio of compress_width/width, sync to crop value
Verify:
verified on x301
Change-Id: Ib943f8a11263ce577952e589bc172d8b7bafd954
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
long yu [Mon, 25 Mar 2019 09:46:07 +0000 (17:46 +0800)]
emmc: backward compatible with all HS400 clock sources [1/1]
PD#SWPL-6294
Problem:
TL1 and G12B uses clkin3,TXLX uses clkin2
Solution:
unifying the HS400 source clock name in DTS
Verify:
TL1-T962X2_X301 G12B-Reva G12B-Revb
Change-Id: I7acaf7b4392d757955f43a0b17ac1fad84f53d26
Signed-off-by: Long Yu <long.yu@amlogic.com>
shihong.zheng [Tue, 26 Mar 2019 10:40:27 +0000 (18:40 +0800)]
pts: fix mvc play is not smooth. [1/1]
PD#SWPL-6094
Problem:
some mvc stream is not smooth.
Solution:
optimize the condition for pts loockup fail code.
Verify:
x301
Change-Id: I50bb3f317e1245735f9ce0ffcc44376c91e871ed
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>
zhiwei.yuan [Mon, 25 Mar 2019 09:28:35 +0000 (17:28 +0800)]
dtv_demod: playing dtmb is not smooth when signal is non-standard [1/1]
PD#SWPL-6286
Problem:
tps of non-standard signal is incorrect
Solution:
ignore calculating amplitude tps
Verify:
verified by t962x2_x301
Change-Id: Ibd3ff7bfe56ca604ad99fa7c6f457202c227c9ae
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Nan Li [Fri, 22 Mar 2019 02:40:43 +0000 (10:40 +0800)]
emmc: modify data delay_step [1/1]
PD#SWPL-6200
Problem:
emmc calibration delay set error.
Solution:
modify delay_step to 250ps.
Verify:
verify by s912.
Change-Id: I1c0e31ae6bdda8b0f105e12f3efc81b5474376d6
Signed-off-by: Nan Li <nan.li@amlogic.com>
Zhe Wang [Mon, 25 Mar 2019 11:53:30 +0000 (19:53 +0800)]
audio: add tdm and spdif clk fine tuning interface [1/1]
PD#SWPL-5518
Problem:
In DTV passthrough, the output clk drifts from input
Solution:
add clk fine tuning interface
Verify:
verify by X301
Change-Id: I969d3eb865fb1aba90f155965548454cc3040c99
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
zhiwei.yuan [Thu, 14 Mar 2019 06:31:38 +0000 (14:31 +0800)]
di: "DI: di_init_buf vmap fail" is seen when power on [1/1]
PD#SWPL-5908
Problem:
execute vmap when di reserved memory is disable
Solution:
skip memory calculation in init buf while using cma
Verify:
verified by t962x2_x301
Change-Id: Ib0c2e422f61f2b4182109cb7bbb3107029363ce0
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Xing Wang [Fri, 25 Jan 2019 14:55:49 +0000 (22:55 +0800)]
audio: auge: transfer audio data to wake word algorithm [1/3]
PD#TV-3389
Problem:
add vad wake engine in kernel
Solution:
transfer audio data to wake engine
Verify:
x301
Change-Id: I7f44d0141141775bb40f01dbc344a295a72c9d87
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
yicheng shen [Fri, 22 Mar 2019 07:10:29 +0000 (03:10 -0400)]
hdmirx: update vb phy setting [1/1]
PD#SWPL-6234
Problem:
flash line in the screen when HDMI connect iTV IV3010 box.
Solution:
1.update phy low frequency setting;
2.optimzie pll init sequence to save some detection time;
3.update verB pll setting(0323);
Verify:
TL1
Change-Id: I71225b06f02e4888ce093780a2beb0a381986293
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Yong Qin [Mon, 25 Mar 2019 08:12:14 +0000 (16:12 +0800)]
di: av to dtv , black screen [1/1]
PD#SWPL-6096
Problem:
from local av switch to dtv，black screen,then search channel
Solution:
revert the modification "62617"
Verify:
tl1
Change-Id: I49ae627b9f0b1f6a776e5cbffc723a43e85cee72
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Nan Li [Fri, 22 Mar 2019 11:42:12 +0000 (19:42 +0800)]
sd: optimize sduart not supported flag [1/1]
PD#SWPL-4858
Problem:
Soc not support sduart
Solution:
add not supported flag in dts
Verify:
verify by tl1 skt
Change-Id: Ifd1f975bd13b150aac9d99f60423ab4f0b903c98
Signed-off-by: Nan Li <nan.li@amlogic.com>
Hong Guo [Wed, 20 Mar 2019 06:36:56 +0000 (14:36 +0800)]
cpufreq: dts: adjust cpufreq table for tl1 [1/1]
PD#SWPL-5823
Problem:
adjust cpufreq table for tl1
Solution:
adjust cpufreq table for tl1
Verify:
test pass on tl1_x301
Change-Id: I69f5efc5051c09102c07df34b7bd33b30c61361f
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Zhe Wang [Thu, 14 Mar 2019 14:16:36 +0000 (22:16 +0800)]
audio: add soc DRC tune interface [1/3]
PD#SWPL-5904
Problem:
Audio DRC in SOC is out of work
Solution:
Add DRC tune interface
Verify:
Verify on X301
Change-Id: I5e8ecc6dafd7fc3805b0c3e60a6ec4c945729119
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
long yu [Fri, 15 Mar 2019 07:38:47 +0000 (15:38 +0800)]
storage: emmc: reduce cmd/ds/data pins driver strength for TL1 SOC [1/1]
PD#SWPL-5334
Problem:
TX window is not stable
Solution:
Reduce the drive capability of emmc controller pins
Verify:
TL1-T962X2_X301
Change-Id: Ib641c66131c2dee41eb68fb262f4770f431676b9
Signed-off-by: long yu <long.yu@amlogic.com>
Gongwei Chen [Thu, 21 Mar 2019 12:17:49 +0000 (20:17 +0800)]
dts: g12a and g12b no audio output [1/1]
PD#SWPL-6171
Problem:
no audio output
Solution:
modify dts spdifout_a_mute
Verify:
Verify by Android P AOSP fermi
Change-Id: Ie19d22326154b8f59ce06dce994f8dd072e93170
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
Yong Qin [Fri, 22 Mar 2019 06:36:17 +0000 (14:36 +0800)]
di: The last frame of the video flash garbage [1/1]
PD#SWPL-6070
Problem:
flash garbages when unreg process.
Solution:
can't speed down the clkb rate, there is a mirror mode
Verify:
tl1
Change-Id: I5fcc29a1cda196992a457f40fee31992f4bc1528
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Shuai Li [Thu, 21 Mar 2019 12:20:21 +0000 (20:20 +0800)]
audio: add I2S samesrc channel mapping to spdif [1/1]
PD#SWPL-6147
Problem:
I2S has 8 channels but spdif only 2.
Need map every single i2s lane to spdif sharebuffer.
Solution:
Add the DTS setting MASKS as former does.
Verify:
Local tested.
Change-Id: If212fc1b9c937a42778682948773874951b8a55a
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Hong Guo [Fri, 22 Mar 2019 05:23:36 +0000 (13:23 +0800)]
CPUFREQ: Setting different cpufreq tables. [1/1]
PD#SWPL-4035
Problem:
Setting different cpufreq tables.
Solution:
Setting different cpufreq tables.
Verify:
g12a_u200, verify pass
Change-Id: If93f1baa1f50aeeed6e3d7f9d2ffeb1e0a5b4e02
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
nengwen.chen [Wed, 20 Mar 2019 13:10:40 +0000 (21:10 +0800)]
audio: Image signal delay of 1.5 seconds when switching to AV source [1/2]
PD#TV-3067
Problem:
Image signal delay of 1.5 seconds when switching to AV source.
Solution:
1.add av audio control for audio patch.
Verify:
verified by x301
Change-Id: I3e820923a26439b3aeb9841562b81cd6d55ed4ea
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Bencheng Jing [Fri, 4 Jan 2019 15:03:28 +0000 (23:03 +0800)]
amvecm: fix atv scaled when switch between different formats [1/3]
PD#SWPL-3883
Problem:
atv picture flash when switch channel between different formats
Solution:
fresh atv overscan on vync
Verify:
txhd
Change-Id: I74f8e64c12031dbc321675c4b1dbc54adcd3721d
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Bencheng Jing [Wed, 20 Mar 2019 08:44:37 +0000 (16:44 +0800)]
di: disable cue for g12a [1/2]
PD#SWPL-6142
Problem:
disable cue for g12a
Solution:
disable cue for g12a
Verify:
U212
Change-Id: I276fa0b8605110b709feaceb6d23d9b566c16a44
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Dezhi Kong [Thu, 7 Mar 2019 06:06:41 +0000 (14:06 +0800)]
drm: a113d support drm issue [1/1]
PD#SH-397
Problem:
use modetest to test A113D DRM function, displaying is incorrect
Solution:
add linear addr config for a113d drm mode
Verify:
verified on s400
Change-Id: Id6a2c6ad94bc0148815076561d9dc2ae8ded6884
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
Xingyu Chen [Thu, 21 Mar 2019 03:26:09 +0000 (11:26 +0800)]
remote: fix compatibility issue for RC5 protocol [1/1]
PD#SWPL-6161
Problem:
partial ir-keys with RC5 can’t been decoded on some boards(Eg: TL1, TXLX)
Solution:
adjust the register to extend the detection range of half/whole bit
Verify:
test pass on TL1
Change-Id: I6ff0af79b3bf9f624c1f249f056b729df7b5dd0c
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Jian Cao [Fri, 15 Mar 2019 09:21:08 +0000 (17:21 +0800)]
osd: reset afbcd flag when convert format value [1/1]
PD#SWPL-5185
Problem:
"fence color format error 28" when test weston-simple-egl
Solution:
reset afbcd flag when convert format value
Verify:
Locally on g12b_w400
Change-Id: I81a9394288026bc596f6b3438cec72ceaad7749f
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Xingyu Chen [Mon, 18 Mar 2019 05:36:09 +0000 (13:36 +0800)]
pinctrl: gxl: add new group definition for support TEST_N used as i2sout [1/1]
PD#OTT-2745
Problem:
TEST_N used only as gpio, and don't support other function
Solution:
add new group definition for support TEST_N used as i2sout
Verify:
test pass on P212
Change-Id: I47103b27df9baf21537e82b48ad18911a355f873
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Yong Qin [Wed, 20 Mar 2019 04:44:48 +0000 (12:44 +0800)]
di: flash green when play 265 SD video [1/1]
PD#SWPL-6097
Problem:
flash green garbages when play h.265 SD video
Solution:
afbc input not enable
Verify:
tl1
Change-Id: I310eeb6d922ab8b9035c815afc4e967c0e5390ff
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
zhiwei.yuan [Wed, 20 Mar 2019 07:07:21 +0000 (15:07 +0800)]
di: enable lock win will cause green screen [1/1]
PD#SWPL-3877
Problem:
lock window cause green screen
Solution:
disable lock win as default
Verify:
verified by t962x2_x301
Change-Id: I59f3047b9fdd7e4b6ad4750740ddca58bfe8d79a
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
wenbiao zhang [Wed, 13 Mar 2019 06:55:02 +0000 (14:55 +0800)]
hdmirx: send uevent when hdmirx port open/close [1/2]
PD#SWPL-4308
Problem:
gpu limit cause cts performance test fail
Solution:
limit gpu only when video playing or hdmiin
Verify:
P321
Change-Id: I682a908957491c8445fdb384dedd404169757e2b
Signed-off-by: wenbiao zhang <wenbiao.zhang@amlogic.com>
Pengcheng Chen [Thu, 14 Mar 2019 10:02:35 +0000 (18:02 +0800)]
ge2d: fix ge2d buffer index error caused crash issue [2/2]
PD#SWPL-5685
Problem:
ge2d buffer index error when dma alloc called simultaneously
Solution:
add lock to ge2d buffer index
Verify:
verified by w400
Change-Id: I1efa4127fbcb939ade457a890769d59a146a0798
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Pengcheng Chen [Thu, 14 Mar 2019 09:44:33 +0000 (17:44 +0800)]
gdc: fix gdc buffer index error caused crash issue [1/2]
PD#SWPL-5685
Problem:
gdc buffer index error when dma alloc called simultaneously
Solution:
add lock to gdc buffer index
Verify:
verified by w400
Change-Id: Ia5e41562675b594029fd5a0166561c0069739536
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Brian Zhu [Tue, 19 Mar 2019 13:19:30 +0000 (21:19 +0800)]
vpp: add the pic_mode backup to check difference [1/1]
PD#TV-2929
Problem:
The pic_mode in cur_dispbuf was changed but not be detected.
Solution:
Add global pic_mode variable to check if the pic_mode in cur_dispbuf
is changed. If so, force vpp_set_filters.
Verify:
verified on x301
Change-Id: I5b95f512ad0823b031989f05526f114694887f2b
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
renjiang.han [Tue, 12 Mar 2019 12:11:59 +0000 (20:11 +0800)]
amvideo2: add keep last frame [1/1]
PD#OTT-2452
Problem:
Black screen in the middle of the cut.
Solution:
add keep last frame.
Verify:
on U212
Change-Id: Ib24f066e0682c7427024a74d9bf8cc9b8a310d62
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
Tao Zeng [Wed, 20 Mar 2019 06:20:08 +0000 (14:20 +0800)]
numa: fix compile error after open NUMA config [2/2]
PD#SWPL-5301
Problem:
When open NUMA config on ARM64, there is compile error
Solution:
fix some compile problems
Verify:
p212
Change-Id: I1ae9ef975c680e3e5545186aac9ca2b57597bfe4
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
xianjun.liu [Thu, 7 Mar 2019 09:26:42 +0000 (17:26 +0800)]
MTD: spin_lock stuck problem about marking bad block for mtd driver [1/1]
PD#SWPL-5613
Problem:
boot fail because of the UBI write error
Solution:
fixed nested-calls spin-lock when update bbt
Verify:
AXG-S420
Change-Id: I56b603ebffa5557ab7949ead2fddd41323346d09
Signed-off-by: xianjun.liu <xianjun.liu@amlogic.com>
Tao Zeng [Thu, 7 Mar 2019 02:17:29 +0000 (10:17 +0800)]
vmap: print pfn for register in vmalloc range [1/1]
PD#SWPL-5564
Problem:
When open VMAP for kernel stack, if we meet kernel panic log, we
can't know physical address of stack and hard to debug.
Solution:
Print pfn for register in vmalloc range
Verify:
p212
Change-Id: Iee120df1feab88e412ef63e87c2e2bb4ad0645fb
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
he.he [Tue, 12 Mar 2019 04:52:14 +0000 (12:52 +0800)]
USB: amldevread data failed [1/1]
PD#SWPL-5292
Problem:
g12b-revB, some u disk amldevread test failed.
Solution:
Changing the register 0x54 to 0x2a, enabled the hs rx idle noise filter,
and the abnormal u-disk has no problem in the amldevread test.
Verify:
g12b revB
Change-Id: Ibbf924c93d193d7e40c4d8121a4616a8d1caeaaa
Signed-off-by: he.he <he.he@amlogic.com>
huijie.huang [Tue, 12 Mar 2019 10:19:39 +0000 (18:19 +0800)]
audio: open audio out for g12b socket board [1/1]
PD#SWPL-5833
Problem:
No audio out for g12b socket board
Solution:
Open audio codec
Verify:
test pass on g12b socket board
Change-Id: Ieec710edec218a13da41d249889515b0ac53a3e9
Signed-off-by: huijie.huang <huijie.huang@amlogic.com>
Yong Qin [Mon, 18 Mar 2019 09:20:09 +0000 (17:20 +0800)]
di: exit play local 4k video flashing [1/1]
PD#SWPL-5877
Problem:
1.afbc mode, play h.265 local video, when exit playing,
screen will flashing sometimes.
2.when exit playing, there cost 5s time.
Solution:
4k video di bypass, afbc hw module used by vpp, when
DI unreg, needn't to disable AFBC moudule.
Verify:
tl1
Change-Id: I2ac66a145a009042d286dda50e7259657f4bfc8e
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
yujie.wu [Fri, 15 Mar 2019 02:13:02 +0000 (10:13 +0800)]
audio: Add Mute function for tas5782 [1/1]
PD#SWPL-5961
Problem:
There is no mute control for tas5782
Solution:
Add mute function for tas 5782
Verify:
A113
Change-Id: I75f8b82a359778f28494636fe76c7bc4db848643
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
zhiwei.yuan [Fri, 15 Mar 2019 09:37:04 +0000 (17:37 +0800)]
di: TL1 Scrolling subtiltes jitter seriously than p321 [1/1]
PD#SWPL-3877
Problem:
mcinfo canvas configuration is incorrect
Solution:
correct canvas config
Verify:
verified by t962x2_x301
Change-Id: I93958044faed25994d83a53948e226729357d2aa
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
huijie.huang [Thu, 28 Feb 2019 11:02:42 +0000 (19:02 +0800)]
power: S905Y2 limit cpu and gpu freq to reduce HDMI TX consumption [1/1]
PD#SWPL-4653
Problem:
optimize the S905Y2 power consumption
Solution:
limit CPU and GPU frequency, reduce hdmi tx consumption
Verify:
test pass on u221
Change-Id: I1d95068f8beb5616c9aeea91122b5233e479db8b
Signed-off-by: huijie.huang <huijie.huang@amlogic.com>
Pengcheng Chen [Mon, 4 Mar 2019 04:43:49 +0000 (12:43 +0800)]
gdc: ge2d: fix ge2d dma-buf no free memory issue [1/1]
PD#SWPL-5685
Problem:
gdc&ge2d dma buf memory leak
Solution:
clear dmabuf alloc flag when dmabuf really free
Verify:
verified by w400
Change-Id: I914d93d795311fd6e3e34ca5bd64aaf4db3d4c7a
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
nengwen.chen [Fri, 15 Mar 2019 13:50:54 +0000 (21:50 +0800)]
dtv_demod: Prevent NULL pointer crash caused by tuner attach failure [1/1]
PD#TV-1539
Problem:
Prevent NULL pointer crash caused by tuner attach failure.
Solution:
Prevent NULL pointer crash caused by tuner attach failure.
Verify:
verified by x301
Change-Id: I57cf32947775626467eb952dd2298ae9ec84601d
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
nengwen.chen [Wed, 9 Jan 2019 12:41:49 +0000 (20:41 +0800)]
atv_demod: modify atv demod support multi tuner load [1/3]
PD#TV-1539
Problem:
modify atv demod support multi tuner load.
Solution:
1.add fine tune.
2.add set/get if info.
3.add tuner type set/get.
4.add multi tuner config in dts.
5.atv demod ver: V2.09.
Verify:
verified by x301
Change-Id: I23328bfab3d3508db67cef3e327002563eb1a87e
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Xing Wang [Wed, 27 Feb 2019 06:12:11 +0000 (14:12 +0800)]
audio: auge: fix PAO for frhdmirx [1/2]
PD#SWPL-4010
Problem:
Not detect audio type by PAO for frhdmirx
Solution:
Add hw detect for frdhmirx PAO
audio type is checked by hw for PCM too
Verify:
x301
Change-Id: Ib60d738c69f336866250a8181609503912bf0485
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
qingwei.xu [Thu, 14 Mar 2019 02:16:13 +0000 (10:16 +0800)]
dts: Ion and vdin0 CMA Memory Optimization [1/1]
PD#SWPL-5896
Problem:
The memory consumption of modules ion and vdin0 is too large
Solution:
Ion CMA memory optimization to 32M,vdin0 to 160M
Verify:
X301、T309
Change-Id: If9e54390baeda6d330bb2c96b14ef3975333a2f1
Signed-off-by: qingwei.xu <qingwei.xu@amlogic.com>
deng.liu [Thu, 14 Mar 2019 11:42:45 +0000 (19:42 +0800)]
common: NN API implementation [1/3]
PD#SWPL-86
Problem:
Android tensorflow lite ,NN API implementation
Solution:
NN API implementation
Verify:
Local on galilei
Change-Id: I699a53b3fa2fd199cea7ef4db2f439ef49536a9c
Signed-off-by: deng.liu <deng.liu@amlogic.com>
projects / platform / kernel / linux-amlogic.git / log