Fabio Estevam [Thu, 9 Jan 2020 14:07:23 +0000 (11:07 -0300)]
imx8qxp_mek: Select CONFIG_NET_RANDOM_ETHADDR
Some i.MX8QXP MEK boards do not have MAC address stored
and hang during eth driver probe:
Error: ethernet@
5b040000 address not set.
(Board hangs)
To fix this problem select CONFIG_NET_RANDOM_ETHADDR so that
a valid MAC address can be used in such case.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Anatolij Gustschin [Tue, 7 Jan 2020 15:37:43 +0000 (16:37 +0100)]
imx: add imx8x based deneb board
Add support for Capricorn Deneb SoM variant.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Anatolij Gustschin [Tue, 7 Jan 2020 15:37:42 +0000 (16:37 +0100)]
imx: add imx8x capricorn giedi board
Add support for i.MX8X based Capricorn Giedi SoM.
Supported interfaces: GPIO, ENET, eMMC, I2C, UART.
Console output:
U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100)
Trying to boot from MMC1
Load image from MMC/SD 0x3e400
U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07
CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C
Model: Siemens Giedi
Board: Capricorn
Boot: MMC0
DRAM: 1022 MiB
MMC: FSL_SDHC: 0
Loading Environment from MMC... OK
In: serial@
5a080000
Out: serial@
5a080000
Err: serial@
5a080000
Net: eth1: ethernet@
5b050000 [PRIME]
Autobooting in 1 seconds, press "<Esc><Esc>" to stop
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Tom Rini [Sat, 11 Jan 2020 13:07:03 +0000 (08:07 -0500)]
travis: Switch to QEMU v4.2.0 globally
Given our tests in GitLab / Azure we can use QEMU v4.2.0 for all
platforms now.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 10 Jan 2020 22:07:27 +0000 (17:07 -0500)]
gitlab/azure: Update to latest container
- Updated base snapshot
- QEMU v4.2.0
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 10 Jan 2020 21:38:40 +0000 (16:38 -0500)]
Merge branch '2020-01-10-master-imports'
- Android image support enhancements
- Assorted ARM fixes and enhancements
- m68k update
Eugeniu Rosca [Tue, 24 Dec 2019 16:51:08 +0000 (17:51 +0100)]
cmd: adtimg: Refactor usage style
Trying to extend 'adtimg' functionality [1], we've been severely hit
by a major limitation in the command's usage scheme. Specifically, the
command's user interface appears to be too centric to getting the
DTB/DTBO entry [3] based on the index of the desired DT in the image,
which makes it really difficult retrieving the DT entry based on
alternative criteria (e.g. filtering by id/rev fields), the
latter being demanded by real life customer use-cases [1].
This went to the point of receiving below feedback from Sam [2]:
-- snip --
As for 'dtimg' command: after giving it some thought, I think not much
people using it yet. So in this particular case I don't have some
strong preference, and if you think the 'dtimg' interface is ugly, and
it overcomes "don't break interfaces" rule, maybe now is a good time
to rework it (before it gets widely used).
-- snip --
Given the above, rework the usage pattern from [4] to [5], in order to
allow an intuitive enablement of "by id|rev" DT search [6].
[1] https://patchwork.ozlabs.org/cover/1202575/
("cmd: dtimg: Enhance with --id and --rev options (take #1)")
[2] https://patchwork.ozlabs.org/patch/1182207/#2317020
[3] https://source.android.com/devices/architecture/dto/partitions
[4] Old usage
adtimg dump <addr> - Print image contents
adtimg start <addr> <index> <varname> - Get DT address by index
adtimg size <addr> <index> <varname> - Get DT size by index
[5] New usage
adtimg addr <addr> - Set image location to <addr>
adtimg dump - Print out image contents
adtimg get dt --index=<i> [avar [svar]] - Get DT address and size by index
[6] Soon-to-be-provided "by id|rev" add-on functionality
adtimg get dt --id=<id> --rev=<rev> [avar [svar [ivar]]]
- Get DT address/size/index by id|rev fields
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Eugeniu Rosca [Tue, 24 Dec 2019 16:51:07 +0000 (17:51 +0100)]
cmd: adtimg: Rename internal symbols
With 'dtimg.c' renamed to 'adtimg.c', now ensure the naming
consistency in the internal implementation of 'adtimg.c'.
No functional change intended.
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Eugeniu Rosca [Tue, 24 Dec 2019 16:51:06 +0000 (17:51 +0100)]
dtimg/am57xx_evm_defconfig: Rename dtimg to adtimg
Rename the existing 'dtimg' command to 'adtimg', in order to:
- Suggest the Android origins and scope
- Be consistent with the upcoming 'abootimg' command (naming
suggested by Simon [*])
The change in _not_ backward compatible, but its benefits outweigh its
downsides, given that we don't expect active users of 'dtimg' today.
Perform the rename in several steps:
1. Rename *.c file and Kconfig symbol. This should allow
'git log --follow' to properly track the history of 'adtimg.c'
2. 's/dtimg/adtimg/g' in the internal namespace of 'adtimg.c'
ELF comparison [**] before and after shows no functional change.
[*] https://patchwork.ozlabs.org/patch/1182212/#2291600
[**] diff -u <(objdump -d cmd/dtimg.o) <(objdump -d cmd/adtimg.o)
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Simon Glass<sjg@chromium.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Heinrich Schuchardt [Tue, 24 Dec 2019 11:21:09 +0000 (12:21 +0100)]
virtio: fix typo devicd
%s/devicd/device
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Rajesh Ravi [Fri, 22 Nov 2019 22:50:01 +0000 (14:50 -0800)]
arm: cpu: armv8: add support for arm psci reset2.
Current U-Boot has only support for psci reset.
Adding support for arm psci reset2 allows passing of reset level
and other platform sepcific parameters like strap settings
to lowlevel psci implementation.
Signed-off-by: Rajesh Ravi <rajesh.ravi@broadcom.com>
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Bharat Kumar Reddy Gooty [Mon, 16 Dec 2019 17:09:43 +0000 (09:09 -0800)]
arch: arm: Program GIC LPI configuration table
Programs the following:
1. Redistributor PROCBASER configuration table (which
is common for all redistributors)
2. Redistributor pending table (PENDBASER), for all the
available redistributors.
Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Heinrich Schuchardt [Wed, 11 Dec 2019 12:51:38 +0000 (13:51 +0100)]
mkimage: simplify fit_check_params()
fit_check_params() wants at least two of dflag, fflag, and lflag set.
Simplify the logical constraint checking this.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Klaus H. Sorensen [Wed, 11 Dec 2019 11:18:29 +0000 (11:18 +0000)]
cmd/eeprom.c: prepend 0x to hex numbers in output message format
If the numbers do not happen to contain any digits from [a-f], it's
not clear that they are base 16.
Signed-off-by: Klaus H. Sorensen <khso@prevas.dk>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Philippe Reynes [Thu, 9 Jan 2020 16:34:02 +0000 (17:34 +0100)]
test/cmd_ut.c: fix cmd_ut_category
In the function cmd_ut_category, the prefix is used with
the function strncmp to know if the prefix should be
removed from the test name, even if the prefix is NULL.
To avoid this issue, we consider that a prefix NULL
mean no prefix. So we only try to remove the prefix
from the test_name if the prefix is not NULL, then
we avoid to call the function strncmp with a NULL
prefix.
Reported-by: Coverity CID 281110
Fixes:
4ad4edfe ("cmd_ut: add a parameter prefix to the function cmd_ut_category")
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Andy Shevchenko [Fri, 29 Nov 2019 17:47:59 +0000 (19:47 +0200)]
gcc-9: silence 'address-of-packed-member' warning
GCC 9.x starts complaining about potential misalignment of the pointer to
the array (in this case alignment=2) in the packed (alignment=1) structures.
Repeating Linus' Torvalds commit
6f303d60534c in the Linux kernel.
Original commit message:
We already did this for clang, but now gcc has that warning too.
Yes, yes, the address may be unaligned. And that's kind of the point.
This in particular hides the warnings like
drivers/usb/gadget/composite.c:545:23: warning: taking address of packed member of ‘struct usb_string_descriptor’ may result in an unaligned pointer value [-Waddress-of-packed-member]
545 | collect_langs(sp, s->wData);
drivers/usb/gadget/composite.c:550:24: warning: taking address of packed member of ‘struct usb_string_descriptor’ may result in an unaligned pointer value [-Waddress-of-packed-member]
550 | collect_langs(sp, s->wData);
drivers/usb/gadget/composite.c:555:25: warning: taking address of packed member of ‘struct usb_string_descriptor’ may result in an unaligned pointer value [-Waddress-of-packed-member]
555 | collect_langs(sp, s->wData);
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Holger Brunck [Mon, 25 Nov 2019 16:24:16 +0000 (17:24 +0100)]
boards/km_arm: enable support for Macronix SPI NOR flash
The M25P80 and M25P32 SPI flashes from Numonix/Micron
will be replaced by Marconix MX25L80 and MX25L32 flashes.
Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
CC: Stefan Roese <sr@denx.de>
CC: Valentin Longchamp <valentin.longchamp@ch.abb.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Holger Brunck [Mon, 25 Nov 2019 16:24:15 +0000 (17:24 +0100)]
arm/km: remove board KMCOGE3UN
This target is out of maintenance and can be removed.
Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
CC: Stefan Roese <sr@denx.de>
CC: Valentin Longchamp <valentin.longchamp@ch.abb.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Holger Brunck [Mon, 25 Nov 2019 16:24:14 +0000 (17:24 +0100)]
km/boards: add MAC address offset as argument to ivm_populate_env
For upcoming SECU board we have different MAC address offsets depending
on which functional unit we are running. In this case we need to pass
this value to the ivm_populate_env function instead of using the hard
coded config option there.
Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
CC: Stefan Roese <sr@denx.de>
CC: Valentin Longchamp <valentin.longchamp@ch.abb.com>
CC: Marek Vasut <marex@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
Holger Brunck [Mon, 25 Nov 2019 16:24:13 +0000 (17:24 +0100)]
km/boards: fix typo for MAC address offset config option
This patch only fixes a typo.
Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
CC: Stefan Roese <sr@denx.de>
CC: Valentin Longchamp <valentin.longchamp@ch.abb.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Frank Wunderlich [Fri, 22 Nov 2019 14:32:24 +0000 (15:32 +0100)]
poweroff: add poweroff for mt6323 pmic
this adds poweroff to bananapi r2 / mt7623 / mt6323 pmic
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Han Nandor [Tue, 12 Nov 2019 08:39:38 +0000 (08:39 +0000)]
rtc: add support for DS3232 device
DS3232 is an i2c RTC with 236 bytes of battery-backed SRAM.
Add an RTC driver for DS3232 device, which provides time and
date support. Also read and write functions are provided,
which can be used to access the SRAM memory.
Signed-off-by: Nandor Han <nandor.han@vaisala.com>
Simon Goldschmidt [Mon, 11 Nov 2019 21:30:46 +0000 (22:30 +0100)]
spl: fix stack usage check if gd is not initialized
Most platforms do not set up gd->start_addr_sp in SPL. Since this is
required for CONFIG_SPL_SYS_REPORT_SACK_F_USAGE to work correctly, set
up gd->start_addr_sp in SPL to the value passed to
board_init_f_init_reserve if it is not set yet.
Fixes:
d8c0332031 ("spl: implement stack usage check")
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Tom Rini [Mon, 11 Nov 2019 14:39:11 +0000 (09:39 -0500)]
m68k: Drop CONFIG_MCFPIT support
All platforms currently use the "MCFTMR" DMA timer rather than the PIT
timer, so drop the MCFPIT code.
Cc: Huan Wang <alison.wang@nxp.com>
Cc: Angelo Dureghello <angelo@sysam.it>
Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Cc: Wolfgang Wegner <w.wegner@astro-kom.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Angelo Dureghello <angelo@sysam.it>
Robert Beckett [Mon, 28 Oct 2019 18:44:06 +0000 (18:44 +0000)]
bootcount: add a DM i2c eeprom backing store for bootcount
This driver allows the use of i2c eeprom device or partition as backing
store for boot counter values with DM enabled.
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Angelo Durgehello [Fri, 15 Nov 2019 22:54:20 +0000 (23:54 +0100)]
drivers: mcfmii: add dm support
Add specific dm code, but maintaining this driver as is, so more in the
shape of a mii library. Can be moved to dm in a further step.
Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
Angelo Durgehello [Fri, 15 Nov 2019 22:54:19 +0000 (23:54 +0100)]
drivers: fsl_mcdmafec: conversion to dm
Full conversion to dm for all boards, legacy code removed.
Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
Angelo Durgehello [Fri, 15 Nov 2019 22:54:18 +0000 (23:54 +0100)]
drivers: mcffec: conversion to dm
Full conversion to dm for all boards, legacy code removed.
Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
Angelo Durgehello [Fri, 15 Nov 2019 22:54:17 +0000 (23:54 +0100)]
drivers: net: add mcf fec dm Kconfig support
Add ColdFire fec to Kconfig.
Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
Angelo Durgehello [Fri, 15 Nov 2019 22:54:16 +0000 (23:54 +0100)]
m68k: add dm fec support
Add architecture-related code for dm fec support.
Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
Angelo Durgehello [Fri, 15 Nov 2019 22:54:15 +0000 (23:54 +0100)]
configs: purge unneeded fec defines
Remove unneeded fec-related defines after fec moved as dm.
Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
Angelo Durgehello [Fri, 15 Nov 2019 22:54:14 +0000 (23:54 +0100)]
configs: add eth dm support for all ColdFire boards
Add dm eth config options for all involved ColdFire-based boards.
Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
Angelo Durgehello [Fri, 15 Nov 2019 22:54:13 +0000 (23:54 +0100)]
m68k: add fec fdt overrides to all boards
Add ethernet controller overrides for all involved boards.
Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
Angelo Durgehello [Fri, 15 Nov 2019 22:54:12 +0000 (23:54 +0100)]
m68k: add fec base node to devicetrees
Add basic ethernet controller devicetree nodes for all ColdFire
families.
Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
Tom Rini [Thu, 9 Jan 2020 18:42:43 +0000 (13:42 -0500)]
Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-mpc83xx
- A small PR with MC8309 fixes from Rasmus.
Tom Rini [Thu, 9 Jan 2020 13:52:21 +0000 (08:52 -0500)]
Merge tag 'dm-pull-8jan20' of git://git.denx.de/u-boot-dm
dm: Increased separation of ofdata_to_platdata() and probe methods
Tom Rini [Thu, 9 Jan 2020 13:51:57 +0000 (08:51 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-usb
- DFU updates
Tom Rini [Wed, 8 Jan 2020 23:57:11 +0000 (18:57 -0500)]
Merge tag 'efi-2020-04-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Pull request for UEFI sub-system for efi-2020-04-rc1
This pull request provides:
* support for FIT images for UEFI binaries
* drivers for hardware random number generators
* an implementation of the EFI_RNG_PROTOCOL
* a sub-command for efidebug to display configuration tables
Tom Rini [Wed, 8 Jan 2020 20:25:13 +0000 (15:25 -0500)]
Merge tag 'uniphier-v2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier
UniPhier SoC updates for v2020.04
- add pinmux nodes for I2C ch5, ch6
- enable SPI driver and command
Tom Rini [Wed, 8 Jan 2020 20:24:50 +0000 (15:24 -0500)]
Merge tag 'u-boot-imx-
20200108' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx
---------------------------------------------------------------------
Add i.MX8MP SoC and EVK board
Update README for i.MX8MN EVK and fix mmc env
Add pca9450 driver
--------------------------------------------------------------------
Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/
634211885
Tom Rini [Wed, 8 Jan 2020 20:23:49 +0000 (15:23 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-socfpga
Tom Rini [Wed, 8 Jan 2020 20:23:37 +0000 (15:23 -0500)]
Merge tag 'u-boot-amlogic-
20200108' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic
- Khadas VIM3L based on Amlogic S905D3 support
- Various fixups for amlogic boards
- Unnecessary header includes drop into video/meson
Tom Rini [Wed, 8 Jan 2020 20:08:34 +0000 (15:08 -0500)]
Merge branch '2020-01-07-master-imports'
- DT overlay support in FIT images in SPL
- remoteproc update
- Assorted SATA fixes
- Other assorted fixes
Masahiro Yamada [Tue, 7 Jan 2020 09:47:26 +0000 (18:47 +0900)]
uniphier_{v7, v8}_defconfig: enable SPI driver and sspi command
Compile drivers/spi/uniphier_spi.c and cmd/spi.c
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Tue, 7 Jan 2020 09:19:23 +0000 (18:19 +0900)]
ARM: dts: uniphier: add pinmux nodes for I2C ch5, ch6
The next generation SoC can connect on-board slave devices via
I2C ch5 and ch6.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Peng Ma [Wed, 4 Dec 2019 10:36:45 +0000 (10:36 +0000)]
ata: fsl_sata: Continue probing other sata port when failed current port.
In the initialization of sata driver, we want to initialize all port
probes, Therefore, any detection failure between of them should continue
initialization by skipping the current port instead of exit.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Peng Ma [Wed, 4 Dec 2019 10:36:42 +0000 (10:36 +0000)]
ata: sata_sil: Continue probing other sata port when failed current port.
In the initialization of sata driver, we want to initialize all port
probes, Therefore, any detection failure between of them should continue
initialization by skipping the current port instead of exit.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Patrice Chotard [Fri, 6 Dec 2019 14:01:49 +0000 (15:01 +0100)]
treewide: Remove CONFIG_SYS_UBOOT_START from configs board files
As previous CONFIG_SYS_UBOOT_START is now set by default to
CONFIG_SYS_TEXT_BASE when not defined, CONFIG_SYS_UBOOT_START
can be removed from include/configs board files.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
Patrice Chotard [Fri, 6 Dec 2019 14:01:48 +0000 (15:01 +0100)]
Makefile: Fix CONFIG_SYS_UBOOT_START default value
This patches restores boot on boards which rely on
CONFIG_SYS_UBOOT_START equal to CONFIG_SYS_TEXT_BASE when using SPL
Fixes:
d3e97b53c1f2 ("spl: fix entry_point equal to load_addr")
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Thu, 5 Dec 2019 23:46:11 +0000 (18:46 -0500)]
cmd/Kconfig: Add more dependencies to OSE bootm support
Per Enea OSE documentation, it supports some classes of ARM, PowerPC and
X86. Limit the option to those platforms.
Signed-off-by: Tom Rini <trini@konsulko.com>
Peng Fan [Mon, 6 Jan 2020 08:19:34 +0000 (16:19 +0800)]
imx: imx8mn: enable CONFIG_CMD_ERASEENV
enable CONFIG_CMD_ERASEENV to make it easy to erase env.
Use savedefconfig to generate new defconfig.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 6 Jan 2020 08:16:32 +0000 (16:16 +0800)]
imx: imx8mn_evk: add board_mmc_get_env_dev
Add board_mmc_get_env_dev, otherwise,
Loading Environment from MMC...
MMC Device 0 not found
*** Warning - No MMC card found, using default environment
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 6 Jan 2020 07:38:17 +0000 (15:38 +0800)]
imx8mn: evk: add README
Add a README for users to build a workable image.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 30 Dec 2019 09:46:21 +0000 (17:46 +0800)]
imx: add i.MX8MP EVK board
Add basic i.MX8MP EVK board support
U-Boot SPL 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800)
power_pca9450b_init
DDRINFO: start DRAM init
DDRINFO:ddrphy calibration done
DDRINFO: ddrmix config done
Normal Boot
Failed to find clock node. Check device tree
WDT: Not found!
Trying to boot from BOOTROM
image offset 0x8000, pagesize 0x200, ivt offset 0x0
U-Boot 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800)
CPU: Freescale i.MX8MP rev1.0 at 1000 MHz
Reset cause: POR
Model: NXP i.MX8MPlus EVK board
DRAM: 6 GiB
MMC: FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
u-boot=> mmc list
FSL_SDHC: 1 (SD)
FSL_SDHC: 2
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 30 Dec 2019 09:40:38 +0000 (17:40 +0800)]
imx: imx8m: add imximage-8mp-lpddr4.cfg
Add imximage-8mp-lpddr4.cfg for imximage usage, almost same
as i.MX8MN ddr4 cfg, but with different ddr firmware
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 30 Dec 2019 09:39:18 +0000 (17:39 +0800)]
clk: imx: add i.MX8MP clk driver
Add i.MX8MP clk driver for i.MX8MP CLK driver model usage
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 30 Dec 2019 08:56:25 +0000 (16:56 +0800)]
clk: imx: add imx_clk_mux2_flags
Add imx_clk_mux2_flags which will be used by i.MX8MP
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 30 Dec 2019 08:52:30 +0000 (16:52 +0800)]
imx: imx8m: only support non-dm code in clock_imx8mm.c
The drivers/clk/imx/*.c are used for CLK dm case, the
clock_imx8mm.c is used for non CLK dm case, let's split
it. Sometimes it is hard to enable CLK dm in SPL stage,
considering code size, malloc size requirement, the splittion
will make it easy to use non CLK dm in SPL stage.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 30 Dec 2019 08:44:48 +0000 (16:44 +0800)]
imx: Kconfig: make SPL_IMX_ROMAPI_LOADADDR visible to i.MX8MP
i.MX8MP ROM support ROMAPI as i.MX8MN, so make
SPL_IMX_ROMAPI_LOADADDR visible to i.MX8MP
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 30 Dec 2019 08:43:48 +0000 (16:43 +0800)]
imx: add i.MX8MP PE property
i.MX8MP does not have LVTTL, it has a PE property
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 30 Dec 2019 08:40:57 +0000 (16:40 +0800)]
imx: imx8mp: add pin header file
Add pin header file for i.MX8MP
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Tue, 15 Oct 2019 09:15:18 +0000 (02:15 -0700)]
power: Add new PMIC PCA9450 driver
PCA9450 PMIC series is used to support iMX8MM (PCA9450A) and
iMX8MN (PCA9450B). Add the PMIC driver for both PCA9450A and PCA9450B.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 30 Dec 2019 02:03:44 +0000 (10:03 +0800)]
arm: dts: freescale: Add i.MX8MP dtsi support
The i.MX8M Plus Media Applications Processor is part of the growing
mScale family targeting the consumer and industrial market. It brings
an effective Machine Learning and AI accelerator that enables a new
class of applications. It is built in Samsung 14LPP to achieve both
high performance and low power consumption and relies on a powerful
fully coherent core complex based on a quad core ARM Cortex-A53 cluster
and Cortex-M7 low-power coprocessor, audio digital signal processor,
machine learning and graphics accelerators.
Add the basic dtsi support for i.MX8MP.
Patch from Anson Huang for Kernel
https://patchwork.kernel.org/patch/
11310915/
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 30 Dec 2019 01:58:52 +0000 (09:58 +0800)]
ddr: imx8m: Add DRAM PLL to generate 1000Mhz output
We will generate DRAM 4000MT/s as default for i.MX8MP.
So need DRAM PLL to generate 1000Mhz clock to DDR PHY and controller.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Tue, 24 Dec 2019 03:26:41 +0000 (11:26 +0800)]
mxc_ocotp: support i.MX8MP
i.MX8MP use similar ocotp as i.MX8MN, but has changed fuse banks
and ctrl register bit definitions, so update to reflect that.
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 30 Dec 2019 01:52:15 +0000 (09:52 +0800)]
pinctrl: imx8m: support i.MX8MP
Add i.MX8MP compatible to let the pinctrl driver could support
i.MX8MP.
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Fri, 27 Dec 2019 03:40:55 +0000 (11:40 +0800)]
imx: imx8m: add 1GHz fracpll entry
4000MTS DDR needs 1GHz fracpll, so add the entry
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Fri, 27 Dec 2019 03:39:15 +0000 (11:39 +0800)]
imx: imx8mp: add basic clock
i.MX8MP has similar architecture as i.MX8MN, but it has different
clk root and index, so add that to make i.MX8MP could use
the non-dm clock driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Fri, 27 Dec 2019 02:38:05 +0000 (10:38 +0800)]
arm: dts: add i.MX8MP pinfunc header
Add i.MX8MP pinfunc header for dts usage
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Fri, 27 Dec 2019 02:37:39 +0000 (10:37 +0800)]
dt-bindings: clock: add i.MX8MP clock header
Add i.MX8MP clock header
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Fri, 27 Dec 2019 02:27:49 +0000 (10:27 +0800)]
imx: spl: support i.MX8MP spl_boot_device
i.MX8MP follows i.MX8MN, so just let it use spl_board_boot_device
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Fri, 27 Dec 2019 02:24:54 +0000 (10:24 +0800)]
imx: imx8m: add Kconfig entry for i.MX8MP
Add Kconfig entry for i.MX8MP
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Mon, 30 Dec 2019 09:57:10 +0000 (17:57 +0800)]
imx: cpu: enlarge bit mask to 0x1FF for cpu type
i.MX8MP use 0x182 as dummy id, 0xFF is not able the get the highest
bit, so enlarge bit mask to 0x1FF to make it could detect
cpu type correctly
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Fri, 27 Dec 2019 02:19:42 +0000 (10:19 +0800)]
imx8mp: set BYPASS ID SWAP to avoid AXI bus errors
Set the BYPASS ID SWAP bit (GPR10 bit 1) in order for GPU not to
generated AXI bus errors with TZC380 enabled.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Fri, 27 Dec 2019 02:14:02 +0000 (10:14 +0800)]
imx: get cpu id/type of i.MX8MP
Support get i.MX8MP cpu id and cpu type
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Wed, 11 Dec 2019 06:17:12 +0000 (06:17 +0000)]
imx: imx8mq: handle ESDHC in mxc_get_clock
fsl_esdhc_imx driver will call "mxc_get_clock(MXC_ESDHC_CLK +
dev->seq)", however mxc_get_clock wrongly handle MXC_ESDHC_CLK
as root clk and cause sd card could not be detected in U-Boot proper,
as below:
"Loading Environment from MMC... unable to select a mode"
Handle MXC_ESDHC_CLK in mxc_get_clock to fix the issue.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Fabio Estevam <festevam@gmail.com>
Fabio Estevam [Tue, 10 Dec 2019 09:33:00 +0000 (06:33 -0300)]
wandboard: Remove repeated PMIC string
After the conversion to DM_PMIC the following output is seen:
PMIC: PMIC: PFUZE100 ID=0x10
Remove the unnecessary PMIC string from the board file to
avoid the repetead string.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fabio Estevam [Tue, 10 Dec 2019 09:32:59 +0000 (06:32 -0300)]
wandboard: Fix the DM_PMIC conversion
Commit
ec837c82d709 ("imx6: wandboard: convert to DM_PMIC")
caused the following pmic_get() error:
CPU: Freescale i.MX6QP rev1.0 at 792 MHz
Reset cause: POR
DRAM: 2 GiB
PMIC: pmic_get() ret -19
...
and since the PMIC presence is used to determine the board D1 revision,
the following error is seen when booting a board rev D1:
WARNING: Could not determine dtb to use
and the kernel does not boot at all.
Fix the regression by passing "pfuze100@8" as the correct parameter
to the pmic_get() function in the DM case.
Fixes:
ec837c82d709 ("imx6: wandboard: convert to DM_PMIC")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Rasmus Villemoes [Thu, 19 Dec 2019 09:46:08 +0000 (09:46 +0000)]
mpc83xx_clk: always treat MPC83XX_CLK_PCI as invalid
The current mpc83xx_clk driver is broken for any board for which
mpc83xx_has_pci() is true, i.e. anything not MPC8308:
When is_clk_valid() reports that MPC83XX_CLK_PCI is valid,
init_all_clks() proceeds to call init_single_clk(), but that doesn't
know about either MPC83XX_CLK_PCI or has any handling of the
TYPE_SCCR_ONOFF mode correctly returned by retrieve_mode(). Hence
init_single_clk() ends up returning -EINVAL, and the whole board hangs
in serial_init().
The quickest fix is to simply pretend that clock is invalid for
all, since nobody can have been relying on it. Adding proper support
seems to be a bit more involved than just handling TYPE_SCCR_ONOFF:
- The power-on-reset value of SCCR[PCICM] is 0, so
mpc83xx_clk_enable() would probably need to be tought to enable the
clock.
- The frequency of PCI_SYNC_OUT is either SYS_CLK_IN or SYS_CLK_IN/2
depending on the CFG_CLKIN_DIV configuration input, but that can't
be read from software, so to properly fill out
->speed[MPC83XX_CLK_PCI] I think one would need guidance from
Kconfig or dtb.
Partially fixes:
07d538d281 clk: Add MPC83xx clock driver
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Mario Six <mario.six@gdsys.cc>
Rasmus Villemoes [Thu, 12 Dec 2019 09:18:52 +0000 (09:18 +0000)]
mpc83xx: set MPC83XX_GPIO_CTRLRS to 2 for MPC8309
The MPC8309 has two gpio controllers (which is already correctly
reflected in its struct immap definition).
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Mario Six <mario.six@gdsys.cc>
Rasmus Villemoes [Thu, 12 Dec 2019 08:35:49 +0000 (08:35 +0000)]
mpc83xx: immap_83xx: add spi8xxx_t in immap for mpc8309
Allow drivers/spi/mpc8xxx_spi.c to be built for an mpc8309 target.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Mario Six <mario.six@gdsys.cc>
Rasmus Villemoes [Thu, 12 Dec 2019 08:11:46 +0000 (08:11 +0000)]
powerpc: mpc83xx: convert CONFIG_FSL_ELBC to Kconfig
This complements commit
068789773d0 which did the conversion for
mpc85xx.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Mario Six <mario.six@gdsys.cc>
Rasmus Villemoes [Wed, 11 Dec 2019 09:39:36 +0000 (09:39 +0000)]
mpc83xx: make ARCH_MPC8309 select SYS_FSL_ERRATUM_ESDHC111
The mpc8309 is also affected by the "Manual Asynchronous CMD12 abort
operation causes protocol violations" erratum, though it is enumerated
as eSDHC16 in the errata sheet for mpc8309.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Mario Six <mario.six@gdsys.cc>
Sean Anderson [Wed, 25 Dec 2019 04:54:54 +0000 (23:54 -0500)]
log: Include missing header for log.h
log.h references cmd_tbl_t but command.h was not included
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Sean Anderson [Wed, 25 Dec 2019 04:52:01 +0000 (23:52 -0500)]
dm: Add a debug message when devices are skipped pre-reloc
This adds a message to lists_bind_fdt when it skips initializing a device
pre-relocation. I've had a couple errors where a device didn't initialize
properly because one of its dependencies was missing.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Sean Anderson [Wed, 18 Dec 2019 02:21:54 +0000 (21:21 -0500)]
Include missing headers for fdt_support.h
fdt_support.h is missing declarations for bd_t. Including asm/u-boot.h
pulls in the definition.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Masahiro Yamada [Sat, 14 Dec 2019 04:47:26 +0000 (13:47 +0900)]
binman: fix default filename of u-boot-with-ucode-ptr in documentation
The suffix should be ".bin" instead of ".dtb" .
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 30 Dec 2019 04:19:28 +0000 (21:19 -0700)]
dm: devres: Add a new OFDATA phase
Since the ofdata_to_platdata() method can allocate resources, add it as a
new devres phase.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 30 Dec 2019 04:19:27 +0000 (21:19 -0700)]
dm: devres: Use an enum for the allocation phase
At present we only support two phases where devres can be used:
bind and probe. This is handled with a boolean. We want to add a new
phase (platdata), so change this to an enum.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 30 Dec 2019 04:19:26 +0000 (21:19 -0700)]
dm: devres: Add tests
The devres functionality has very few users in U-Boot, but it still should
have tests. Add a few basic tests of the main functions.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 30 Dec 2019 04:19:25 +0000 (21:19 -0700)]
dm: test: Add a test driver for devres
Add a driver which does devres allocations so that we can write tests for
devres.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 30 Dec 2019 04:19:24 +0000 (21:19 -0700)]
dm: devres: Convert to use logging
At present when CONFIG_DEBUG_DEVRES is enabled, U-Boot prints log messages
to the console with every devres allocation/free event. This causes most
tests to fail since the console output is not as expected.
In particular this prevents us from adding a device to sandbox which uses
devres in its bind method.
Move devres over to use U-Boot's logging feature instead, and add a new
category for devres.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 30 Dec 2019 04:19:23 +0000 (21:19 -0700)]
test: Add functions to find the amount of allocated memory
The malloc() implementations provides a way of finding out the approximate
amount of memory that is allocated. Add helper functions to make it easier
to access this and see changes over time. This is useful for tests that
want to check if memory has been allocated or freed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 30 Dec 2019 04:19:22 +0000 (21:19 -0700)]
dm: devres: Create a new devres header file
At present these functions are lumped in with the core device functions.
They have their own #ifdef to control their availability, so it seems
better to split them out.
Move them into their own header file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 30 Dec 2019 04:19:21 +0000 (21:19 -0700)]
dm: core: Add a new flag to track platform data
We want to avoid allocating platform data twice. This could happen if
device_probe() is called after device_ofdata_to_platdata() for the same
device.
Add a flag to track whether device_ofdata_to_platdata() has been called on
a device. Check the flag to make sure it doesn't happen twice, and clear
the flag when the data is freed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 30 Dec 2019 04:19:20 +0000 (21:19 -0700)]
dm: core: Export a new function to read platdata
Add a new internal function, device_ofdata_to_platdata() to handle
allocating private space associated with each device and reading the
platform data from the device tree.
Call this new function from device_probe().
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 30 Dec 2019 04:19:19 +0000 (21:19 -0700)]
dm: core: Add a comment for DM_FLAG_OF_PLATDATA
This flag is missing a comment. Add one.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 30 Dec 2019 04:19:18 +0000 (21:19 -0700)]
dm: core: Allocate parent data separate from probing parent
At present the parent is probed before the child's ofdata_to_platdata()
method is called. Adjust the logic slightly so that probing parents is
not done until afterwards.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 30 Dec 2019 04:19:17 +0000 (21:19 -0700)]
dm: core: Move ofdata_to_platdata() call earlier
This method is supposed to extract platform data from the device tree. It
should be done before the device itself is probed. Move it earlier in the
device_probe() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 30 Dec 2019 04:19:16 +0000 (21:19 -0700)]
dm: core: Don't clear active flag twice when probe() fails
Remove this duplicated code, since the 'fail' label does this immediately.
Signed-off-by: Simon Glass <sjg@chromium.org>