drm/panel: simple: Add support for EDT ET035012DM6

Add support for the EDT ET035012DM6 3.5" 320x240 QVGA 24-bit RGB TFT.

The datasheet with all specs can be retrieved online:
https://www.glynshop.com/erp/owweb/Daten/DSS/EDT/Products/ \
Specifications/Active%20Displays/ET035012DM6.pdf

Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
[m.felsch@pengutronix.de: adapt commit message]
[m.felsch@pengutronix.de: rm unecessary comments]
[m.felsch@pengutronix.de: correct data_enable polarity]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416101630.3482-2-m.felsch@pengutronix.de

dt-bindings: display: add EDT ET035012DM6 display description

Add support for the ET035012DM6 3.5" QVGA TFT LCD panel. The datasheet
can be retrieved online:

https://www.glynshop.com/erp/owweb/Daten/DSS/EDT/Products/ \
Specifications/Active%20Displays/ET035012DM6.pdf

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416101630.3482-1-m.felsch@pengutronix.de

drm/panel: Remove duplicate header

Remove duplicate header which is included twice.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1555183750-11028-1-git-send-email-jrdr.linux@gmail.com

drm/panel: simple: Add TFC S9700RTWV43TR-01B 800x480 panel support

Add support for Three Five displays TFC S9700RTWV43TR-01B 800x480
panel with resistive touch found on TI's AM335X-EVM.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba4b2c26beec014b7b3c84a27b9413cec7ef2902.1553243203.git.jsarha@ti.com

dt-bindings: drm/panel: simple: Add binding for TFC S9700RTWV43TR-01B

Add bindign for TFC S9700RTWV43TR-01B 7" Three Five Corp 800x480 LCD
panel with resistive touch.

The panel is found on TI AM335x-evm.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/24fea39438decd1e17a9c9afa320d49aca03f60d.1553243203.git.jsarha@ti.com

drm/panel: Add support for EDT ETM0430G0DH6

The EDT ETM0430G0DH6 is 4.3" 480x272 panel, which can be
supported by the simple panel driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219140438.17063-2-marex@denx.de

dt-bindings: display: Add ETM0430G0DH6 bindings

Document the Emerging Display Technology Corp. (EDT) ETM0430G0DH6
display, which is a 480x272 4.3" TFT display.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Jan Tuerk <jan.tuerk@emtrion.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219140438.17063-1-marex@denx.de

drm/panel: simple: Fix panel_simple_dsi_probe

In case mipi_dsi_attach() fails remove the registered panel to avoid added
panel without corresponding device.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226081153.31334-1-peter.ujfalusi@ti.com

drm/panel: Add OSD101T2587-53TS driver

The panel is similar to OSD101T2045-53TS (which is handled by panel-simple)
with one big difference: osd101t2587-53ts needs MIPI_DSI_TURN_ON_PERIPHERAL
message to be sent from the host to be operational and thus can not be
handled by panel-simple.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226075523.28997-5-peter.ujfalusi@ti.com

dt-bindings: display: Add bindings for OSD101T2587-53TS panel

This adds the device-tree bindings for the OSD101T2587-53TS 10.1"
1920x1200 panel from One Stop Displays.

Note: the panel is similar to OSD101T2045-53TS, but it needs additional
MIPI_DSI_TURN_ON_PERIPHERAL message from the host.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226075523.28997-4-peter.ujfalusi@ti.com

drm/panel: simple: Add support for OSD101T2045-53TS

Add support for the OSD101T2045-53TS 10.1" 1920x1200 panel from One Stop
Displays to the panel-simple driver

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226075523.28997-3-peter.ujfalusi@ti.com

dt-bindings: display: Add bindings for OSD101T2045-53TS

This adds the device-tree bindings for the OSD101T2045-53TS 10.1"
1920x1200 panel from One Stop Displays.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226075523.28997-2-peter.ujfalusi@ti.com

drm/panel: Add driver for Samsung S6E63M0 panel

This patch adds Samsung S6E63M0 AMOLED LCD panel driver, connected over
spi. It's based on already removed, non-device-tree S6E63M0 driver and
panel-samsung-ld9040. It can be found for example in some of Samsung
Aries based phones.

Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190222175153.20567-2-pawel.mikolaj.chmiel@gmail.com

dt-bindings: panel: Add Samsung S6E63M0 panel documentation

This commit adds documentation for Samsung S6E63M0 AMOLED LCD panel
driver.

Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190222175153.20567-1-pawel.mikolaj.chmiel@gmail.com

drm/panel: simple: Add support for VXT VL050-8048NT-C01 panel

Add support for the VXT VL050-8048NT-C01 800x480 panel to the
panel-simple driver.

This panel is used on some boards manufactured by TechNexion, such as
imx7d-pico.

Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219002706.20077-3-festevam@gmail.com

dt-bindings: Add VXT VL050-8048NT-C01 panel bindings

The VXT VL050-8048NT-C01 is a TFT LCD panel with a 800x480 resolution
connected via 24 width parallel interface.

Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219002706.20077-2-festevam@gmail.com

dt-bindings: Add vendor prefix for VXT Ltd

VXT Ltd is a manufacturer of projected capacitive touch panel
and display solutions: http://www.vxt.com.tw/

Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219002706.20077-1-festevam@gmail.com

dma-buf: Remove unused sync_dump()

sync_dump() is an unused, unexported, function that adds 64k to the
kernel image and doesn't even provide locking around the global array it
uses.

add/remove: 0/2 grow/shrink: 0/0 up/down: 0/-65734 (-65734)
Function                                     old     new   delta
sync_dump                                    198       -    -198
sync_dump_buf                              65536       -  -65536

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190419181904.6199-1-chris@chris-wilson.co.uk

MAINTAINERS: Add Sam as reviewer for drm/panel

Sam has been helping out a lot with reviewing DRM panel patches. Add him
as reviewer to help him do this important work.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416075910.12015-1-thierry.reding@gmail.com

drm/lima: handle shared irq case for lima_pp_bcast_irq_handler

On Hikey board all lima ip blocks are shared with one irq.
This patch avoids a NULL ptr deref crash on this platform
on startup. Tested with Weston and kmscube.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1555662781-22570-7-git-send-email-peter.griffin@linaro.org

drm: increase drm mmap_range size to 1TB

After patch "drm: Use the same mmap-range offset and size for GEM and
TTM", application failed to create bo of system memory because drm
mmap_range size decrease to 64GB from original 1TB. This is not big
enough for applications. Increase the drm mmap_range size to 1TB.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190417221507.933-1-Philip.Yang@amd.com

drm/v3d: Add missing implicit synchronization.

It is the expectation of existing userspace (X11 + Mesa, in
particular) that jobs submitted to the kernel against a shared BO will
get implicitly synchronized by their submission order.  If we want to
allow clever userspace to disable implicit synchronization, we should
do that under its own submit flag (as amdgpu and lima do).

Note that we currently only implicitly sync for the rendering pass,
not binning -- if you texture-from-pixmap in the binning vertex shader
(vertex coordinate generation), you'll miss out on synchronization.

Fixes flickering when multiple clients are running in parallel,
particularly GL apps and compositors.

v2: Fix a missing refcount on the CSD done fence for L2 cleaning.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416225856.20264-6-eric@anholt.net
Acked-by: Rob Clark <robdclark@gmail.com>

drm/v3d: Drop reservation of a shared slot in the dma-buf reservations.

We only set the excl (possible-writing) fence pointer and never add a
shared (read-only) fence.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416225856.20264-5-eric@anholt.net
Acked-by: Rob Clark <robdclark@gmail.com>

drm/v3d: Add support for compute shader dispatch.

The compute shader dispatch interface is pretty simple -- just pass in
the regs that userspace has passed us, with no CLs to run.  However,
with no CL to run it means that we need to do manual cache flushing of
the L2 after the HW execution completes (for SSBO, atomic, and
image_load_store writes that are the output of compute shaders).

This doesn't yet expose the L2 cache's ability to have a region of the
address space not write back to memory (which could be used for
shared_var storage).

So far, the Mesa side has been tested on V3D v4.2 simpenrose (passing
the ES31 tests), and on the kernel side on 7278 (failing atomic
compswap tests in a way that doesn't reproduce on simpenrose).

v2: Fix excessive allocation for the clean_job (reported by Dan
    Carpenter).  Keep refs on jobs until clean_job is finished, to
    avoid spurious MMU errors if the output BOs are freed by userspace
    before L2 cleaning is finished.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416225856.20264-4-eric@anholt.net
Acked-by: Rob Clark <robdclark@gmail.com>

drm/v3d: Refactor job management.

The CL submission had two jobs embedded in an exec struct.  When I
added TFU support, I had to replicate some of the exec stuff and some
of the job stuff.  As I went to add CSD, it became clear that actually
what was in exec should just be in the two CL jobs, and it would let
us share a lot more code between the 4 queues.

v2: Fix missing error path in TFU ioctl's bo[] allocation.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416225856.20264-3-eric@anholt.net
Acked-by: Rob Clark <robdclark@gmail.com>

drm/v3d: Switch the type of job-> to reduce casting.

All consumers wanted drm_gem_object * now.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416225856.20264-2-eric@anholt.net
Acked-by: Rob Clark <robdclark@gmail.com>

drm/sun4i: Use DRM_GEM_CMA_VMAP_DRIVER_OPS for GEM operations

Our driver makes a typical use of CMA, with GEM object allocated as
GEM CMA objects. Use DRM_GEM_CMA_VMAP_DRIVER_OPS to describe the ops
instead of duplicating them.

Because DRM_GEM_CMA_VMAP_DRIVER_OPS implements a gem_create_object op
which sets per-object funcs (drm_cma_gem_default_funcs), we can also
get rid of free_object_unlocked and gem_vm_ops, which are superseded
by the object funcs.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190418130509.3569-1-paul.kocialkowski@bootlin.com

drm/panfrost: Prevent concurrent resets

If a job times out in slot 0 while a reset is performed because a job
timed out in slot 1, the drm-sched core can get into a deadlock.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190418084305.45021-1-tomeu.vizoso@collabora.com

drm/panfrost: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST

Since panfrost has a 'select' on IOMMU_IO_PGTABLE_LPAE we must depend on
the same set of flags. Otherwise IOMMU_IO_PGTABLE_LPAE will be forced on
even though it cannot build (no support for cmpxchg64).

This fixes the following warning from kconfig:

WARNING: unmet direct dependencies detected for IOMMU_IO_PGTABLE_LPAE
  Depends on [n]: IOMMU_SUPPORT [=y] && (ARM || ARM64 || COMPILE_TEST [=y] && !GENERIC_ATOMIC64 [=y])
  Selected by [y]:
  - DRM_PANFROST [=y] && HAS_IOMEM [=y] && DRM [=y] && (ARM || ARM64 || COMPILE_TEST [=y]) && MMU [=y]

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190417152928.10790-1-steven.price@arm.com

drm/panfrost: Add missing include

Fix sparse warnings:
drivers/gpu/drm/panfrost/panfrost_devfreq.c:133:5:
 warning: symbol 'panfrost_devfreq_init' was not declared. Should it be static?
drivers/gpu/drm/panfrost/panfrost_devfreq.c:168:6:
 warning: symbol 'panfrost_devfreq_resume' was not declared. Should it be static?
drivers/gpu/drm/panfrost/panfrost_devfreq.c:182:6:
 warning: symbol 'panfrost_devfreq_suspend' was not declared. Should it be static?
drivers/gpu/drm/panfrost/panfrost_devfreq.c:212:6:
 warning: symbol 'panfrost_devfreq_record_transition' was not declared. Should it be static?

Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/7c9d75dd-ec67-4491-ca0c-79743211f308@arm.com

drm/panfrost: Make panfrost_gem_free_object() static

Fix sparse warning:

drivers/gpu/drm/panfrost/panfrost_gem.c:17:6:
 warning: symbol 'panfrost_gem_free_object' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416150051.34092-1-yuehaibing@huawei.com

drm/rockchip: shutdown drm subsystem on shutdown

As explained by Robin Murphy:
> the IOMMU shutdown disables paging, so if the VOP is still
> scanning out then that will result in whatever IOVAs it was using now going
> straight out onto the bus as physical addresses.

We had a more radical approach before in commit
7f3ef5dedb14 ("drm/rockchip: Allow driver to be shutdown on reboot/kexec")
but that resulted in new warnings and oopses on shutdown on rk3399
chromeos devices.

So second try is resurrecting Vicentes shutdown change which should
achieve the same result but in a less drastic way.

Fixes: 63238173b2fa ("Revert "drm/rockchip: Allow driver to be shutdown on reboot/kexec"")
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: stable@vger.kernel.org
Suggested-by: JeffyChen <jeffy.chen@rock-chips.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
[adapted commit message to explain the history]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Brian Norris <briannorris@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190402113753.10118-1-heiko@sntech.de

drm/panel: simple: add lg,acx467akm-7 panel

Add ACX467AKM-7 4.95" 1080×1920 LCD panel that is found on the LG Nexus
5 (hammerhead) phone.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
[masneyb@onstation.org: checkpatch fixes; rename jdi,1080p-hammerhead
binding to lg,acx467akm-7.]
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181124200628.24393-2-masneyb@onstation.org

dt-bindings: drm/panel: simple: add lg,acx467akm-7 panel

Add binding for the LG ACX467AKM-7 4.95" 1080×1920 LCD panel that is
found on the LG Nexus 5 (hammerhead) phone. This appears to be a JDI
panel based on some Internet searches, however a specific model number
could not be found. I disassembled an old Nexus 5 with a broken
screen and the LG part number is the only model number present on the
back of the panel, so I think that is probably the best ID to use.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181124200628.24393-1-masneyb@onstation.org

drm/mcde: Add device tree bindings

This adds the device tree bindings for the ST-Ericsson
Multi Channel Display Engine MCDE as found in the U8500
SoCs.

Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416142844.12038-1-linus.walleij@linaro.org

drm/meson: add size and alignment requirements for dumb buffers

The Amlogic SoCs Canvas buffers stride must be aligned on 64bytes
and overall size should be aligned on PAGE width.

Adds a custom dumb_create op to adds these requirements.

Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Suggested-by: Sky Zhou <sky.zhou@amlogic.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Sky Zhou <sky.zhou@amlogic.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190408090137.2402-1-narmstrong@baylibre.com

drm/meson: Make some functions static

Fix sparse warnings:

drivers/gpu/drm/meson/meson_viu.c:93:6: warning: symbol 'meson_viu_set_g12a_osd1_matrix' was not declared. Should it be static?
drivers/gpu/drm/meson/meson_viu.c:121:6: warning: symbol 'meson_viu_set_osd_matrix' was not declared. Should it be static?
drivers/gpu/drm/meson/meson_viu.c:190:6: warning: symbol 'meson_viu_set_osd_lut' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190413141455.34020-1-yuehaibing@huawei.com

drm/sun4i: Make some symbols static

Fix sparse warnings:

drivers/gpu/drm/sun4i/sun8i_tcon_top.c:271:36: warning: symbol 'sun8i_r40_tcon_top_quirks' was not declared. Should it be static?
drivers/gpu/drm/sun4i/sun8i_tcon_top.c:276:36: warning: symbol 'sun50i_h6_tcon_top_quirks' was not declared. Should it be static?
drivers/gpu/drm/sun4i/sun4i_tcon.c:239:6: warning: symbol 'sun4i_tcon_set_mux' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416145855.20852-1-yuehaibing@huawei.com

drm/lima: Make lima_sched_ops static

Fix sparse warning:

drivers/gpu/drm/lima/lima_sched.c:356:36: warning:
 symbol 'lima_sched_ops' was not declared. Should it be static?

Fixes: a1d2a6339961 ("drm/lima: driver for ARM Mali4xx GPUs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416144353.34024-1-yuehaibing@huawei.com

drm: add drm_format_helper.c to kerneldoc

Also drop the dstclip parameter sphinx has warned about (leftover from
an earlier patch version).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190416090533.28374-1-kraxel@redhat.com

drm/lima: Use the drm_gem_fence_array_add helpers for our deps.

It's a pretty direct port of what I did for v3d.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401222635.25013-8-eric@anholt.net
Reviewed-and-tested-by: Qiang Yu <yuq825@gmail.com>

drm: Add helpers for setting up an array of dma_fence dependencies.

I needed to add implicit dependency support for v3d, and Rob Herring
has been working on it for panfrost, and I had recently looked at the
lima implementation so I think this will be a good intersection of
what we all want and simplify our scheduler implementations.

v2: Rebase on xa_limit_32b API change, and tiny checkpatch cleanups on
    the way in (unsigned int vs unsigned, extra return before
    EXPORT_SYMBOL_GPL)

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401222635.25013-6-eric@anholt.net
Reviewed-and-tested-by: Qiang Yu <yuq825@gmail.com> (v1)

drm: Expose "FB_DAMAGE_CLIPS" property to atomic aware user-space only

Plane property "FB_DAMAGE_CLIPS" can only be used by atomic aware
user-space, so no point exposing it otherwise.

Cc: <stable@vger.kernel.org>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: d3b21767821e ("drm: Add a new plane property to send damage during plane update")
Link: https://patchwork.freedesktop.org/patch/msgid/20190415172814.9840-1-drawat@vmware.com

drm: aspeed: Clean up Kconfig options

The GFX IP is inside of the ASPEED BMC SoC so there is little use
enabling it on a kernel that does not support ASPEED.

When building with COMPILE_TEST the architecture many not have CMA
support, so to avoid breaking the build we only select these options if
the architecture supports the contiguous allocator.

I suspect the DRM_PANEL came from a cut/paste error.

Fixes: 4f2a8f5898ec ("drm: Add ASPEED GFX driver")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405081117.27339-1-joel@jms.id.au

dma-buf: explicitely note that dma-fence-chains use 64bit seqno

Instead of checking the upper values of the sequence number use an explicit
field in the dma_fence_ops structure to note if a sequence should be 32bit
or 64bit.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/299655/

drm/panfrost: Add support for 2MB page entries

Add support for 2MB sized pages. This will improve our map and unmap
times and save a bit of memory by avoiding 3rd level page tables for
contiguous allocations.

As we use shmem for buffers and huge page allocations for shmem are off
by default, there isn't an improvement out of the box and userspace must
enable THP for shmem.

It's not clear if the h/w can support 1GB page sizes which standard
ARM long format descriptors support. In any case, it is unlikely we'll
see any contiguous 1GB allocations on current h/w.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411215313.1937-1-robh@kernel.org

drm/panfrost: Add initial panfrost driver

This adds the initial driver for panfrost which supports Arm Mali
Midgard and Bifrost family of GPUs. Currently, only the T860 and
T760 Midgard GPUs have been tested.

v2:
- Add GPU reset on job hangs (Tomeu)
- Add RuntimePM and devfreq support (Tomeu)
- Fix T760 support (Tomeu)
- Add a TODO file (Rob, Tomeu)
- Support multiple in fences (Tomeu)
- Drop support for shared fences (Tomeu)
- Fill in MMU de-init (Rob)
- Move register definitions back to single header (Rob)
- Clean-up hardcoded job submit todos (Rob)
- Implement feature setup based on features/issues (Rob)
- Add remaining Midgard DT compatible strings (Rob)

v3:
- Add support for reset lines (Neil)
- Add a MAINTAINERS entry (Rob)
- Call dma_set_mask_and_coherent (Rob)
- Do MMU invalidate on map and unmap. Restructure to do a single
  operation per map/unmap call. (Rob)
- Add a missing explicit padding to struct drm_panfrost_create_bo (Rob)
- Fix 0-day error: "panfrost_devfreq.c:151:9-16: ERROR: PTR_ERR applied after initialization to constant on line 150"
- Drop HW_FEATURE_AARCH64_MMU conditional (Rob)
- s/DRM_PANFROST_PARAM_GPU_ID/DRM_PANFROST_PARAM_GPU_PROD_ID/ (Rob)
- Check drm_gem_shmem_prime_import_sg_table() error code (Rob)
- Re-order power on sequence (Rob)
- Move panfrost_acquire_object_fences() before scheduling job (Rob)
- Add NULL checks on array pointers in job clean-up (Rob)
- Rework devfreq (Tomeu)
- Fix devfreq init with no regulator (Rob)
- Various WS and comments clean-up (Rob)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marty E. Plummer <hanetzer@startmail.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409205427.6943-4-robh@kernel.org

drm: Add a drm_gem_objects_lookup helper

Similar to the single handle drm_gem_object_lookup(),
drm_gem_objects_lookup() takes an array of handles and returns an array
of GEM objects.

v2:
- Take the userspace pointer directly and allocate the array.
- Expand the function documentation.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409205427.6943-3-robh@kernel.org

iommu: io-pgtable: Add ARM Mali midgard MMU page table format

ARM Mali midgard GPU is similar to standard 64-bit stage 1 page tables, but
have a few differences. Add a new format type to represent the format. The
input address size is 48-bits and the output address size is 40-bits (and
possibly less?). Note that the later bifrost GPUs follow the standard
64-bit stage 1 format.

The differences in the format compared to 64-bit stage 1 format are:

The 3rd level page entry bits are 0x1 instead of 0x3 for page entries.

The access flags are not read-only and unprivileged, but read and write.
This is similar to stage 2 entries, but the memory attributes field matches
stage 1 being an index.

The nG bit is not set by the vendor driver. This one didn't seem to matter,
but we'll keep it aligned to the vendor driver.

Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409205427.6943-2-robh@kernel.org

drm/bridge: ti-tfp410: Set the bus_format

The TFP410 supports 24 bit, single-edge and 12 bit, dual-edge modes.
Depending on how many wires are used (24/12) the driver can set the correct
bus_format.

If the information is not available in DT then assume 24 bit, single-edge
setup.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401124143.17179-3-peter.ujfalusi@ti.com

dt-bindings: display: tfp410: Add bus-width parameter property

tfp410 can be connect to host processor in 24bit, single-edge (24 lines) or
12bit, dual-edge (12 lines).

Add bus-width to the documentation so it can be used to select between the
two connection scheme.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401124143.17179-2-peter.ujfalusi@ti.com

drm/bridge: ti-tfp410: Fall back to HPD polling if HPD irq is not available

In case either the HPD gpio is not specified or when the HPD gpio can not
be used as interrupt we should tell the core that the HPD needs to be
polled for detecting hotplug.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401123342.15767-1-peter.ujfalusi@ti.com

virtio-gpu api: comment feature flags

Add comments to the existing feature flags,
documenting which commands belong to them.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190410114227.25846-2-kraxel@redhat.com

drm: fix drm_fb_xrgb8888_to_rgb888_dstclip()

Oops, the __iomem annotation was added to the header file only.
Add it to the implementation (and documentation) too.

Fixes: 5c5373b51bec ("drm: switch drm_fb_xrgb8888_to_rgb888_dstclip to accept __iomem dst")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190411044932.13247-1-kraxel@redhat.com

drm/tinydrm: Fix fbdev pixel format

Due to copy/paste error, the fbdev format was changed to 32bpp = XRGB8888
which is an emulated format for the RGB565 drivers. Revert to to using the
fallback which is dev->mode_config.preferred_depth for the drivers that
set it or 32bpp for those that don't (repaper, st7586).

Fixes: 3eba3922819f ("drm/tinydrm: Drop using tinydrm_device")
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410124345.25945-1-noralf@tronnes.org

drm/i915/fbdev: Move intel_fb_initial_config() to fbdev helper

It is generic code and having it in the helper will let other drivers
benefit from it.

One change was necessary assuming this to be true:
INTEL_INFO(dev_priv)->num_pipes == dev->mode_config.num_crtc

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190407165243.54043-4-noralf@tronnes.org

drm/client: Rename drm_client_add() to drm_client_register()

This is done to stay consistent with our naming scheme of
_register() = others can start calling us from any thread.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190403125658.32389-1-noralf@tronnes.org

drm/sun4i: Rely on dma interconnect for our RAM offset

Now that we can express our DMA topology, rely on those property instead of
hardcoding an offset from the dma_addr_t which wasn't really great.

We still need to add some code to deal with the old DT that would lack that
property, but we move the offset to the DRM device dma_pfn_offset to be
able to rely on just the dma_addr_t associated to the GEM object.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5df781318e7e05f780a11ed243dcf2b9fe8a08cb.1554108995.git-series.maxime.ripard@bootlin.com

Merge drm/drm-next into drm-misc-next

Finally have a reason for a backmerge other than "it's been a while"!

Backmerging drm-next to -misc-next to facilitate Rob Herring's work on
Panfrost.

Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm/bochs: use simple display pipe

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190410074828.10296-1-kraxel@redhat.com

drm: switch drm_fb_xrgb8888_to_rgb888_dstclip to accept __iomem dst

Not all archs have the __io_virt() macro, so cirrus can't simply convert
pointers that way.  The drm format helpers have to use memcpy_toio()
instead.

This patch makes drm_fb_xrgb8888_to_rgb888_dstclip() accept a __iomem
dst pointer and use memcpy_toio() instead of memcpy().  The helper
function (drm_fb_xrgb8888_to_rgb888_line) has been changed to process a
single scanline.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190410063815.17062-4-kraxel@redhat.com

drm: switch drm_fb_xrgb8888_to_rgb565_dstclip to accept __iomem dst

Not all archs have the __io_virt() macro, so cirrus can't simply convert
pointers that way.  The drm format helpers have to use memcpy_toio()
instead.

This patch makes drm_fb_xrgb8888_to_rgb565_dstclip() accept a __iomem
dst pointer and use memcpy_toio() instead of memcpy().  The helper
function (drm_fb_xrgb8888_to_rgb565_line) has been changed to process
a single scanline.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190410063815.17062-3-kraxel@redhat.com

drm: switch drm_fb_memcpy_dstclip to accept __iomem dst

Not all archs have the __io_virt() macro, so cirrus can't simply convert
pointers that way.  The drm format helpers have to use memcpy_toio()
instead.

This patch makes drm_fb_memcpy_dstclip() accept a __iomem dst pointer
and use memcpy_toio() instead of memcpy().  With that separating out the
memcpy loop into the drm_fb_memcpy_lines() helper isn't useful any more,
so move the code back into the calling functins.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190410063815.17062-2-kraxel@redhat.com

drm/lima: include used header file explicitly

To prevent build fail on some platform which does
not have it in the include file chain.

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: a1d2a6339961 ("drm/lima: driver for ARM Mali4xx GPUs")
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409003617.4470-2-yuq825@gmail.com

drm/lima: add missing Kconfig dependency

Current implementation does not support MMU-less
plarforms.

Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Fixes: a1d2a6339961 ("drm/lima: driver for ARM Mali4xx GPUs")
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409003617.4470-1-yuq825@gmail.com

drm/meson: Add G12A support for the DW-HDMI Glue

The Amlogic G12A embeds the same Synopsys DW-HDMI Controller,
but with :
- a "backport" of the HDR signaling registers from more recent
  DW-HDMI controllers, this will need a tweak since it's not
  normally present on this version of the DW-HDMI controller
- A direct mapping of TOP and DW-HDMI registers instead of an
  internal bus accessed using read/write registers
- Support for RX-SENSE, but not yet implemented
- Support for HDMI 2.1 Dynamic HDR, but not yet implemented
- Different registers mapping for the HDMI PHY setup

This patchs adds support for these changes while providing exact
same support as the previous GXBB, GXL & GXM SoCs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-12-narmstrong@baylibre.com

drm/meson: Add G12A compatible

Finally add the Amlogic G12A SoC compatible for the VPU driver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-11-narmstrong@baylibre.com

drm/meson: Add G12A Video Clock setup

While switching to the Common Clock Framework is still Work In Progress,
this patch adds the corresponding G12A HDMI PLL setup to be on-par
with the other SoCs support.

The G12A has only a single tweak about the high frequency setup,
where the HDMI PLL needs a specific setup to handle correctly the
5.94GHz DCO frequency.

Apart that, it handls ecorrectly all the other HDMI frequencies
and can achieve even better DMT clock frequency precision with
the larger fractional dividier width.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-10-narmstrong@baylibre.com

drm/meson: Add G12A support for CVBS Encoder

The Meson G12A SoCs uses the exact same CVBS encoder except a simple
CVBS DAC register offset and settings delta.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: fixed subject typo]
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-9-narmstrong@baylibre.com

drm/meson: Add G12A support for plane handling in CRTC driver

This patch adds support for the new OSD+VD Plane blending module
in the CRTC code by adding the G12A code to manage the blending
module and setting the right OSD1 & VD1 plane registers.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-8-narmstrong@baylibre.com

drm/meson: Add G12A Support for the Overlay video plane

Amlogic G12A SoC supports the same set of Video Planes, but now
are handled by the new OSD plane blender module.

This patch uses the same VD1 plane for G12A, using the exact same scaler
and VD1 setup registers, except using the new blender register to
disable the plane.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: fix typo in commit log]
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-7-narmstrong@baylibre.com

drm/meson: Add G12A support for OSD1 Plane

Amlogic G12A SoC supports now up to 3 OSD planes (1 more than the
previous SoCs) and a brand new OSD plane blender module.

This patch uses the same OSD1 plane for G12A, using the exact same scaler
and OSD1 setup registers, except using the new blender register to
disable the plane.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: fixed typo in commit log]
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-6-narmstrong@baylibre.com

drm/meson: Add G12A Support for VIU setup

Amlogic G12A SoC needs a different VIU setup code,
handle it.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-5-narmstrong@baylibre.com

drm/meson: Add G12A Support for VPP setup

Amlogic G12A needs a different VPP setup code, handle it here.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-4-narmstrong@baylibre.com

drm/meson: Add registers for G12A SoC

This patch adds the new VPU registers added since the
Amlogic GXM SoCs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-3-narmstrong@baylibre.com

drm/meson: Switch PLL to 5.94GHz base for 297Mhz pixel clock

On Amlogic G12A SoC, the 2,97GHz PLL frequency is not stable enough
to provide a correct 297MHz pixel clock, so switch the PLL base
frequency with a /2 OD when the 297MHz pixel clock is requested.

This solves the issue on G12A and also works fine on GXBB, GXL & GXM.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-2-narmstrong@baylibre.com

dt-bindings: display: amlogic, meson-dw-hdmi: Add G12A compatible and ports

The Amlogic G12A SoC has a slighly modified DW-HDMI Glue with
support for HDMI 2.1 and a different DW-HDMI register access.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313141030.5958-3-narmstrong@baylibre.com

dt-bindings: display: amlogic, meson-vpu: Add G12A compatible and ports

The Amlogic G12A VPU is very similar to the Amlogic GXM VPU but with :
- an enhanced plane blender, with up to 3 OSD planes
- support for AFBC 1.2 decoder (for Bifrost GPU)
- support display mode up to 4k60@75Hz

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313141030.5958-2-narmstrong@baylibre.com

dt-bindings: gpu: add bindings for the ARM Mali Bifrost GPU

Add the bindings for the Bifrost family of ARM Mali GPUs.

The Bifrost GPU architecture is similar to the Midgard family,
but with a different Shader Core & Execution Engine structures.

Bindings are based on the Midgard family bindings, but the inner
architectural changes makes it a separate family needing separate
bindings.

The Bifrost GPUs are present in a number of recent SoCs, like the
Amlogic G12A Family, and many other vendors.
The Amlogic vendor specific compatible is added to handle the
specific IP integration differences and dependencies.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[narmstrong: fixed small typo in compatible description]
Link: https://patchwork.freedesktop.org/patch/msgid/20190401080949.14550-1-narmstrong@baylibre.com

MAINTAINERS: mark lima mailing list as moderated

Note that the lima mailing list is moderated.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9138d8e8-5390-0650-9bc3-050b869e978c@infradead.org
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

drm/cirrus: rewrite and modernize driver.

Time to kill some bad sample code people are copying from ;)

This is a complete rewrite of the cirrus driver.  The cirrus_mode_set()
function is pretty much the only function which is carried over largely
unmodified.  Everything else is upside down.

It is a single monster patch.  But given that it does some pretty
fundamental changes to the drivers workflow and also reduces the code
size by roughly 70% I think it'll still be alot easier to review than a
longish baby-step patch series.

Changes summary:
 - Given the small amout of video memory (4 MB) the cirrus device has
   the rewritten driver doesn't try to manage buffers there.  Instead
   it will blit (memcpy) the active framebuffer to video memory.
 - All gem objects are stored in main memory and are manged using the
   new shmem helpers.  ttm is out.
 - It supports RG16, RG24 and XR24 formats.  XR24 gets converted to RG24
   or RG16 at blit time if needed, to avoid the pitch becoming larger
   than what the cirrus hardware can handle.
 - The simple display pipeline is used.
 - The generic fbdev emulation is used.
 - It's a atomic driver now.
 - It runs wayland.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190405095219.9231-6-kraxel@redhat.com

drm: add drm_fb_xrgb8888_to_rgb888_dstclip()

Simliar to drm_fb_xrgb8888_to_rgb565_dstclip() but converts to rgb888
instead of rgb565.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190405095219.9231-5-kraxel@redhat.com

drm: add drm_fb_xrgb8888_to_rgb565_dstclip()

It is a drm_fb_xrgb8888_to_rgb565() variant which checks the clip
rectangle for the destination too.

Common code between drm_fb_xrgb8888_to_rgb565() and
drm_fb_xrgb8888_to_rgb565_dstclip() was factored out into the
drm_fb_xrgb8888_to_rgb565_lines() helper function.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190405095219.9231-4-kraxel@redhat.com

drm: add drm_fb_memcpy_dstclip() helper

It is a drm_fb_memcpy() variant which checks the clip rectangle for the
destination too.

Common code between drm_fb_memcpy() and drm_fb_memcpy_dstclip() was
factored out into the drm_fb_memcpy_lines() helper function.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190405095219.9231-3-kraxel@redhat.com

drm: move tinydrm format conversion helpers to new drm_format_helper.c

Also rename them from tinydrm_* to drm_fb_*
Pure code motion, no functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190405095219.9231-2-kraxel@redhat.com

Documentation/gpu/meson: Remove link to meson_canvas.c

The file was removed in the below patch and is causing this error:
WARNING: kernel-doc '../scripts/kernel-doc -rst -enable-lineno -function Canvas ../drivers/gpu/drm/meson/meson_canvas.c' failed with return code

Fixes: 2bf6b5b0e374 ("drm/meson: exclusively use the canvas provider module")
Cc: Maxime Jourdan <mjourdan@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190403205652.183496-1-sean@poorly.run

Merge tag 'drm-misc-next-2019-04-04' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.2:

UAPI Changes:
-syncobj: Add TIMELINE_WAIT|QUERY|TRANSFER|TIMELINE_SIGNAL ioctls (Chunming)
-Clarify that 1.0 can be represented by drm_color_lut (Daniel)

Cross-subsystem Changes:
-dt-bindings: Add binding for rk3066 hdmi (Johan)
-dt-bindings: Add binding for Feiyang FY07024DI26A30-D panel (Jagan)
-dt-bindings: Add Rocktech vendor prefix and jh057n00900 panel bindings (Guido)
-MAINTAINERS: Add lima and ASPEED entries (Joel & Qiang)

Core Changes:
-memory: use dma_alloc_coherent when mem encryption is active (Christian)
-dma_buf: add support for a dma_fence chain (Christian)
-shmem_gem: fix off-by-one bug in new shmem gem helpers (Dan)

Driver Changes:
-rockchip: Add support for rk3066 hdmi (Johan)
-ASPEED: Add driver supporting ASPEED BMC display controller to drm (Joel)
-lima: Add driver supporting Arm Mali4xx gpus to drm (Qiang)
-vc4/v3d: Various cleanups and improved error handling (Eric)
-panel: Add support for Feiyang FY07024DI26A30-D MIPI-DSI panel (Jagan)
-panel: Add support for Rocktech jh057n00900 MIPI-DSI panel (Guido)

Cc: Johan Jonker <jbx6244@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Joel Stanley <joel@jms.id.au>
[airlied: fixed XA limit build breakage, Rodrigo also submitted the same patch, but
I squashed it in the merge.]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404201016.GA139524@art_vandelay

drm/pl111: fix possible object reference leak

The call to of_find_matching_node_and_match returns a node pointer with
refcount incremented thus it must be explicitly decremented after the
last usage.

Detected by coccinelle with the following warnings:
drivers/gpu/drm/pl111/pl111_versatile.c:333:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:340:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:346:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:354:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:395:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:402:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Eric Anholt <eric@anholt.net> (supporter:DRM DRIVER FOR ARM PL111 CLCD)
Cc: David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS)
Cc: Daniel Vetter <daniel@ffwll.ch> (maintainer:DRM DRIVERS)
Cc: dri-devel@lists.freedesktop.org (open list:DRM DRIVERS)
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1554307455-40361-6-git-send-email-wen.yang99@zte.com.cn

drm/vc4: vc4_debugfs_regset32() can be static

Fixes: c9be804c8c7a ("drm/vc4: Use common helpers for debugfs setup by the driver components.")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190403213629.GA31570@lkp-ib03

drm/panel: Rocktech jh057n00900: Add terminating newlines to logging

These were missing '\n' terminations, add them.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/da6f2344396555034cf2476c8338b0ce1c56e0a7.camel@perches.com

MAINTAINERS: Add ASPEED BMC GFX DRM driver entry

This hardware is found inside ASPEED Baseboard Management Controller
(BMC) system on chips. It is called the 'SOC Display Controller' or 'GFX'.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20190403001909.31637-4-joel@jms.id.au

drm: Add ASPEED GFX driver

This driver is for the ASPEED BMC SoC's GFX display hardware. This
driver runs on the ARM based BMC systems, unlike the ast driver which
runs on a host CPU and is is for a PCI graphics device.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190403001909.31637-3-joel@jms.id.au

dt-bindings: gpu: Add ASPEED GFX bindings document

This describes the ASPEED BMC SoC's display controller.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20190403001909.31637-2-joel@jms.id.au

drm/vc4: Disable V3D interactions if the v3d component didn't probe.

One might want to use the VC4 display stack without using Mesa.
Similar to the debugfs fixes for not having all of the possible
display bits enabled, make sure you can't oops in vc4 if v3d isn't
enabled.

v2: Fix matching against other v3d variants (review by Paul), don't
    forget to set irq_enabled so that the vblank uapi works
v3: Use -ENODEV instead of -EINVAL on Paul's suggestion.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401183559.3823-2-eric@anholt.net
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>

drm/vc4: Use common helpers for debugfs setup by the driver components.

The global list of all debugfs entries for the driver was painful: the
list couldn't see into the components' structs, so each component had
its own debugs show function to find the component, then find the
regset and dump it.  The components also had to be careful to check
that they were actually registered in vc4 before dereferencing
themselves, in case they weren't probed on a particular platform.
They routinely failed at that.

Instead, we can have the components add their debugfs callbacks to a
little list in vc4 to be registered at drm_dev_register() time, which
gets vc4_debugfs.c out of the business of knowing the whole list of
components.

Thanks to this change, dsi0 (if it existed) would register its node.

v2: Rebase on hvs_underrun addition.
v3: whitespace fixup

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401183559.3823-1-eric@anholt.net
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>

drm/panel: otm8009a: Set clock to 29.70 Mhz

The panel does not support clock frequency over 30.74 MHz. The clock
rate has been reduced to 29.70 MHz & new timings have been computed to
get a framerate of 50 fps.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1553155646-13636-1-git-send-email-yannick.fertre@st.com

drm/panel: rm68200: No error msg if probe deferred

Do not print an error message if the regulator framework returns
EPROBE_DEFER.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1553155535-13555-1-git-send-email-yannick.fertre@st.com

drm/panel: otm8009a: No error msg if probe deferred

Do not print an error message if the regulator framework returns
EPROBE_DEFER.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1553155484-13460-1-git-send-email-yannick.fertre@st.com

drm/panel: otm8009a: Add delay at the end of initialization

At the end of initialization, a delay is required by the panel. Without
this delay, the panel could received a frame early & generate a crash of
panel (black screen).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1553155445-13407-1-git-send-email-yannick.fertre@st.com

drm/panel: Add Rocktech jh057n00900 panel driver

Support Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel. It is a MIPI
DSI video mode panel.

The panel seems to use a Sitronix ST7703 look alike (most of the
commands look similar to the ST7703's data sheet but use a different
number of parameters). The initial version of the DSI init sequence
(including sleeps) were provided by the vendor. Sleeps were reduced
considerably though to speed up initialization.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1a9ce687be283c66dfb26d1dfb52a7bf695090fa.1554114302.git.agx@sigxcpu.org