sh: fix kconfig unmet dependency warning for FRAME_POINTER

[ Upstream commit fda1bc533094a7db68b11e7503d2c6c73993d12a ]

FRAME_POINTER depends on DEBUG_KERNEL so DWARF_UNWINDER should
depend on DEBUG_KERNEL before selecting FRAME_POINTER.

WARNING: unmet direct dependencies detected for FRAME_POINTER
  Depends on [n]: DEBUG_KERNEL [=n] && (M68K || UML || SUPERH [=y]) || ARCH_WANT_FRAME_POINTERS [=n]
  Selected by [y]:
  - DWARF_UNWINDER [=y]

Fixes: bd353861c735 ("sh: dwarf unwinder support.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix wrong condition to trigger background checkpoint correctly

[ Upstream commit cd6d697a6e2013a0a85f8b261b16c8cfd50c1f5f ]

In f2fs_balance_fs_bg(), it needs to check both NAT_ENTRIES and INO_ENTRIES
memory usage to decide whether we should skip background checkpoint, otherwise
we may always skip checking INO_ENTRIES memory usage, so that INO_ENTRIES may
potentially cause high memory footprint.

Fixes: 493720a48543 ("f2fs: fix to avoid REQ_TIME and CP_TIME collision")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to use WHINT_MODE

[ Upstream commit 011e0868e0cf1237675b22e36fffa958fb08f46e ]

Since active_logs can be set to 2 or 4 or NR_CURSEG_PERSIST_TYPE(6),
it cannot be set to NR_CURSEG_TYPE(8).
That is, whint_mode is always off.

Therefore, the condition is changed from NR_CURSEG_TYPE to NR_CURSEG_PERSIST_TYPE.

Cc: Chao Yu <chao@kernel.org>
Fixes: d0b9e42ab615 (f2fs: introduce inmem curseg)
Reported-by: tanghuan <tanghuan@vivo.com>
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix up f2fs_lookup tracepoints

[ Upstream commit 70a9ac36ffd807ac506ed0b849f3e8ce3c6623f2 ]

Fix up a misuse that the filename pointer isn't always valid in
the ring buffer, and we should copy the content instead.

Fixes: 0c5e36db17f5 ("f2fs: trace f2fs_lookup")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

maple: fix wrong return value of maple_bus_init().

[ Upstream commit bde82ee391fa6d3ad054313c4aa7b726d32515ce ]

If KMEM_CACHE or maple_alloc_dev failed, the maple_bus_init() will return 0
rather than error, because the retval is not changed after KMEM_CACHE or
maple_alloc_dev failed.

Fixes: 17be2d2b1c33 ("sh: Add maple bus support for the SEGA Dreamcast.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sh: check return code of request_irq

[ Upstream commit 0e38225c92c7964482a8bb6b3e37fde4319e965c ]

request_irq is marked __must_check, but the call in shx3_prepare_cpus
has a void return type, so it can't propagate failure to the caller.
Follow cues from hexagon and just print an error.

Fixes: c7936b9abcf5 ("sh: smp: Hook in to the generic IPI handler for SH-X3 SMP.")
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST

[ Upstream commit c12ab8dbc492b992e1ea717db933cee568780c47 ]

Until now, all tests involving CONFIG_STRICT_KERNEL_RWX were done with
DEBUG_RODATA_TEST to check the result. But now that
CONFIG_STRICT_KERNEL_RWX is selected by default, it came without
CONFIG_DEBUG_RODATA_TEST and led to the following Oops

[    6.830908] Freeing unused kernel image (initmem) memory: 352K
[    6.840077] BUG: Unable to handle kernel data access on write at 0xc1285200
[    6.846836] Faulting instruction address: 0xc0004b6c
[    6.851745] Oops: Kernel access of bad area, sig: 11 [#1]
[    6.857075] BE PAGE_SIZE=16K PREEMPT CMPC885
[    6.861348] SAF3000 DIE NOTIFICATION
[    6.864830] CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0-rc5-s3k-dev-02255-g2747d7b7916f #451
[    6.873429] NIP:  c0004b6c LR: c0004b60 CTR: 00000000
[    6.878419] REGS: c902be60 TRAP: 0300   Not tainted  (5.15.0-rc5-s3k-dev-02255-g2747d7b7916f)
[    6.886852] MSR:  00009032 <EE,ME,IR,DR,RI>  CR: 53000335  XER: 8000ff40
[    6.893564] DAR: c1285200 DSISR: 82000000
[    6.893564] GPR00: 0c000000 c902bf20 c20f4000 08000000 00000001 04001f00 c1800000 00000035
[    6.893564] GPR08: ff0001ff c1280000 00000002 c0004b60 00001000 00000000 c0004b1c 00000000
[    6.893564] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    6.893564] GPR24: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c1060000
[    6.932034] NIP [c0004b6c] kernel_init+0x50/0x138
[    6.936682] LR [c0004b60] kernel_init+0x44/0x138
[    6.941245] Call Trace:
[    6.943653] [c902bf20] [c0004b60] kernel_init+0x44/0x138 (unreliable)
[    6.950022] [c902bf30] [c001122c] ret_from_kernel_thread+0x5c/0x64
[    6.956135] Instruction dump:
[    6.959060] 48ffc521 48045469 4800d8cd 3d20c086 89295fa0 2c090000 41820058 480796c9
[    6.966890] 4800e48d 3d20c128 39400002 3fe0c106 <91495200> 3bff8000 4806fa1d 481f7d75
[    6.974902] ---[ end trace 1e397bacba4aa610 ]---

0xc1285200 corresponds to 'system_state' global var that the kernel is trying to set to
SYSTEM_RUNNING. This var is above the RO/RW limit so it shouldn't Oops.

It oopses because the dirty bit is missing.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3d5800b0bbcd7b19761b98f50421358667b45331.1635520232.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/dcr: Use cmplwi instead of 3-argument cmpli

[ Upstream commit fef071be57dc43679a32d5b0e6ee176d6f12e9f2 ]

In dcr-low.S we use cmpli with three arguments, instead of four
arguments as defined in the ISA:

cmpli cr0,r3,1024

This appears to be a PPC440-ism, looking at the "PPC440x5 CPU Core
User’s Manual" it shows cmpli having no L field, but implied to be 0 due
to the core being 32-bit. It mentions that the ISA defines four
arguments and recommends using cmplwi.

It also corresponds to the old POWER instruction set, which had no L
field there, a reserved bit instead.

dcr-low.S is only built 32-bit, because it is only built when
DCR_NATIVE=y, which is only selected by 40x and 44x. Looking at the
generated code (with gcc/gas) we see cmplwi as expected.

Although gas is happy with the 3-argument version when building for
32-bit, the LLVM assembler is not and errors out with:

  arch/powerpc/sysdev/dcr-low.S:27:10: error: invalid operand for instruction
   cmpli 0,%r3,1024; ...
           ^

Switch to the cmplwi extended opcode, which avoids any confusion when
reading the ISA, fixes the issue with the LLVM assembler, and also means
the code could be built 64-bit in future (though that's very unlikely).

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://github.com/ClangBuiltLinux/linux/issues/1419
Link: https://lore.kernel.org/r/20211014024424.528848-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/dart: Initialize DART_STREAMS_ENABLE

[ Upstream commit 5a009fc1364170b240a4d351b345e69bb3728b3e ]

DART has an additional global register to control which streams are
isolated. This register is a bit redundant since DART_TCR can already
be used to control isolation and is usually initialized to DART_STREAM_ALL
by the time we get control. Some DARTs (namely the one used for the audio
controller) however have some streams disabled initially. Make sure those
work by initializing DART_STREAMS_ENABLE during reset.

Reported-by: Martin Povišer <povik@protonmail.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20211019162253.45919-1-sven@svenpeter.dev
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: at91: sama7g5: remove prescaler part of master clock

[ Upstream commit facb87ad75603813bc3b1314f5a87377f020fcb8 ]

On SAMA7G5 the prescaler part of master clock has been implemented as a
changeable one. Everytime the prescaler is changed the PMC_SR.MCKRDY bit
must be polled. Value 1 for PMC_SR.MCKRDY means the prescaler update is
done. Driver polls for this bit until it becomes 1. On SAMA7G5 it has
been discovered that in some conditions the PMC_SR.MCKRDY is not rising
but the rate it provides it's stable. The workaround is to add a timeout
when polling for PMC_SR.MCKRDY. At the moment, for SAMA7G5, the prescaler
will be removed from Linux clock tree as all the frequencies for CPU could
be obtained from PLL and also there will be less overhead when changing
frequency via DVFS.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20211011112719.3951784-14-claudiu.beznea@microchip.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: fix null pointer dereference on pointer cs_desc

[ Upstream commit b97053df0f04747c3c1e021ecbe99db675342954 ]

The pointer cs_desc return from snd_usb_find_clock_source could
be null, so there is a potential null pointer dereference issue.
Fix this by adding a null check before dereference.

Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Link: https://lore.kernel.org/r/20211024111736.11342-1-cyeaa@connect.ust.hk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: gus: fix null pointer dereference on pointer block

[ Upstream commit a0d21bb3279476c777434c40d969ea88ca64f9aa ]

The pointer block return from snd_gf1_dma_next_block could be
null, so there is a potential null pointer dereference issue.
Fix this by adding a null check before dereference.

Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Link: https://lore.kernel.org/r/20211024104611.9919-1-cyeaa@connect.ust.hk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes

[ Upstream commit 179811bebc7b91e0f9d0adee9bfa3d2af9c43869 ]

According to the new DT schema for qcom,rpm-msg-ram the node name
should be sram@. memory@ is reserved for definition of physical RAM
(usable by Linux).

This fixes the following dtbs_check error on various device trees:
memory@60000: 'device_type' is a required property
        From schema: dtschema/schemas/memory.yaml

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211018110009.30837-1-stephan@gerhold.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: fix memory and mdio nodes naming for RB3011

[ Upstream commit 14a1f6c9d8017ffbf388e82e1a1f023196d98612 ]

Fixes warnings regarding to memory and mdio nodes and
apply new naming following dt-schema.

Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020214741.261509-1-david@ixit.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/5200: dts: fix memory node unit name

[ Upstream commit aed2886a5e9ffc8269a4220bff1e9e030d3d2eb1 ]

Fixes build warnings:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211013220532.24759-4-agust@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: tegra20-emc: Add runtime dependency on devfreq governor module

[ Upstream commit 14b43c20c283de36131da0cb44f3170b9ffa7630 ]

Tegra20 EMC driver uses simple devfreq governor. Add simple devfreq
governor to the list of the Tegra20 EMC driver module softdeps to allow
userspace initramfs tools like dracut to automatically pull the devfreq
module into ramfs image together with the EMC module.

Reported-by: Nicolas Chauvet <kwizart@gmail.com>
Suggested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211019231524.888-1-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss

[ Upstream commit af984c87293b19dccbd0b16afc57c5c9a4a279c7 ]

A link bounce to a slow fabric may observe FDISC response delays lasting
longer than devloss tmo.  Current logic decrements the final fabric node
kref during a devloss tmo event.  This results in a NULL ptr dereference
crash if the FDISC completes for that fabric node after devloss tmo.

Fix by adding the NLP_IN_RECOV_POST_DEV_LOSS flag, which is set when
devloss tmo triggers and we've noticed that fabric node recovery has
already started or finished in between the time lpfc_dev_loss_tmo_callbk
queues lpfc_dev_loss_tmo_handler.  If fabric node recovery succeeds, then
the driver reverses the devloss tmo marked kref put with a kref get.  If
fabric node recovery fails, then the final kref put relies on the ELS
timing out or the REG_LOGIN cmpl routine.

Link: https://lore.kernel.org/r/20211020211417.88754-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix link down processing to address NULL pointer dereference

[ Upstream commit 1854f53ccd88ad4e7568ddfafafffe71f1ceb0a6 ]

If an FC link down transition while PLOGIs are outstanding to fabric well
known addresses, outstanding ABTS requests may result in a NULL pointer
dereference. Driver unload requests may hang with repeated "2878" log
messages.

The Link down processing results in ABTS requests for outstanding ELS
requests. The Abort WQEs are sent for the ELSs before the driver had set
the link state to down. Thus the driver is sending the Abort with the
expectation that an ABTS will be sent on the wire. The Abort request is
stalled waiting for the link to come up. In some conditions the driver may
auto-complete the ELSs thus if the link does come up, the Abort completions
may reference an invalid structure.

Fix by ensuring that Abort set the flag to avoid link traffic if issued due
to conditions where the link failed.

Link: https://lore.kernel.org/r/20211020211417.88754-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine

[ Upstream commit 79b20beccea3a3938a8500acef4e6b9d7c66142f ]

An error is detected with the following report when unloading the driver:
  "KASAN: use-after-free in lpfc_unreg_rpi+0x1b1b"

The NLP_REG_LOGIN_SEND nlp_flag is set in lpfc_reg_fab_ctrl_node(), but the
flag is not cleared upon completion of the login.

This allows a second call to lpfc_unreg_rpi() to proceed with nlp_rpi set
to LPFC_RPI_ALLOW_ERROR.  This results in a use after free access when used
as an rpi_ids array index.

Fix by clearing the NLP_REG_LOGIN_SEND nlp_flag in
lpfc_mbx_cmpl_fc_reg_login().

Link: https://lore.kernel.org/r/20211020211417.88754-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Use kvzalloc when allocating the struct ib_port

[ Upstream commit 911a81c9c7092bfd75432ce79b2ef879127ea065 ]

The 'struct attribute' flex array contains some struct lock_class_key's
which become big when lockdep is turned on. Big enough that some drivers
will not load when CONFIG_PROVE_LOCKING=y because they cannot allocate
enough memory:

 WARNING: CPU: 36 PID: 8 at mm/page_alloc.c:5350 __alloc_pages+0x27e/0x3e0
  Call Trace:
   kmalloc_order+0x2a/0xb0
   kmalloc_order_trace+0x19/0xf0
   __kmalloc+0x231/0x270
   ib_setup_port_attrs+0xd8/0x870 [ib_core]
   ib_register_device+0x419/0x4e0 [ib_core]
   bnxt_re_task+0x208/0x2d0 [bnxt_re]

Link: https://lore.kernel.org/r/20211019002656.17745-1-wangyugui@e16-tech.com
Signed-off-by: wangyugui <wangyugui@e16-tech.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: imu: st_lsm6dsx: Avoid potential array overflow in st_lsm6dsx_set_odr()

[ Upstream commit 94be878c882d8d784ff44c639bf55f3b029f85af ]

The length of hw->settings->odr_table is 2 and ref_sensor->id is an enum
variable whose value is between 0 and 5.
However, the value ST_LSM6DSX_ID_MAX (i.e. 5) is not caught properly in
 switch (sensor->id) {

If ref_sensor->id is ST_LSM6DSX_ID_MAX, an array overflow will ocurrs in
function st_lsm6dsx_check_odr():
  odr_table = &sensor->hw->settings->odr_table[sensor->id];

and in function st_lsm6dsx_set_odr():
  reg = &hw->settings->odr_table[ref_sensor->id].reg;

To avoid this array overflow, handle ST_LSM6DSX_ID_GYRO explicitly and
return -EINVAL for the default case.

The enum value ST_LSM6DSX_ID_MAX is only present as an easy way to check
the limit and as such is never used, however this is not locally obvious.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Teng Qi <starmiku1207184332@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20211011114003.976221-1-starmiku1207184332@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: Fix alua_tg_pt_gps_count tracking

[ Upstream commit 1283c0d1a32bb924324481586b5d6e8e76f676ba ]

We can't free the tg_pt_gp in core_alua_set_tg_pt_gp_id() because it's
still accessed via configfs. Its release must go through the normal
configfs/refcount process.

The max alua_tg_pt_gps_count check should probably have been done in
core_alua_allocate_tg_pt_gp(), but with the current code userspace could
have created 0x0000ffff + 1 groups, but only set the id for 0x0000ffff.
Then it could have deleted a group with an ID set, and then set the ID for
that extra group and it would work ok.

It's unlikely, but just in case this patch continues to allow that type of
behavior, and just fixes the kfree() while in use bug.

Link: https://lore.kernel.org/r/20210930020422.92578-4-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: Fix ordered tag handling

[ Upstream commit ed1227e080990ffec5bf39006ec8a57358e6689a ]

This patch fixes the following bugs:

1. If there are multiple ordered cmds queued and multiple simple cmds
   completing, target_restart_delayed_cmds() could be called on different
   CPUs and each instance could start a ordered cmd. They could then run in
   different orders than they were queued.

2. target_restart_delayed_cmds() and target_handle_task_attr() can race
   where:

   1. target_handle_task_attr() has passed the simple_cmds == 0 check.

   2. transport_complete_task_attr() then decrements simple_cmds to 0.

   3. transport_complete_task_attr() runs target_restart_delayed_cmds() and
      it does not see any cmds on the delayed_cmd_list.

   4. target_handle_task_attr() adds the cmd to the delayed_cmd_list.

   The cmd will then end up timing out.

3. If we are sent > 1 ordered cmds and simple_cmds == 0, we can execute
   them out of order, because target_handle_task_attr() will hit that
   simple_cmds check first and return false for all ordered cmds sent.

4. We run target_restart_delayed_cmds() after every cmd completion, so if
   there is more than 1 simple cmd running, we start executing ordered cmds
   after that first cmd instead of waiting for all of them to complete.

5. Ordered cmds are not supposed to start until HEAD OF QUEUE and all older
   cmds have completed, and not just simple.

6. It's not a bug but it doesn't make sense to take the delayed_cmd_lock
   for every cmd completion when ordered cmds are almost never used. Just
   replacing that lock with an atomic increases IOPs by up to 10% when
   completions are spread over multiple CPUs and there are multiple
   sessions/ mqs/thread accessing the same device.

This patch moves the queued delayed handling to a per device work to
serialze the cmd executions for each device and adds a new counter to track
HEAD_OF_QUEUE and SIMPLE cmds. We can then check the new counter to
determine when to run the work on the completion path.

Link: https://lore.kernel.org/r/20210930020422.92578-3-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_debug: Fix out-of-bound read in resp_report_tgtpgs()

[ Upstream commit f347c26836c270199de1599c3cd466bb7747caa9 ]

The following issue was observed running syzkaller:

BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:377 [inline]
BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
Read of size 2132 at addr ffff8880aea95dc8 by task syz-executor.0/9815

CPU: 0 PID: 9815 Comm: syz-executor.0 Not tainted 4.19.202-00874-gfc0fe04215a9 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xe4/0x14a lib/dump_stack.c:118
 print_address_description+0x73/0x280 mm/kasan/report.c:253
 kasan_report_error mm/kasan/report.c:352 [inline]
 kasan_report+0x272/0x370 mm/kasan/report.c:410
 memcpy+0x1f/0x50 mm/kasan/kasan.c:302
 memcpy include/linux/string.h:377 [inline]
 sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
 fill_from_dev_buffer+0x14f/0x340 drivers/scsi/scsi_debug.c:1021
 resp_report_tgtpgs+0x5aa/0x770 drivers/scsi/scsi_debug.c:1772
 schedule_resp+0x464/0x12f0 drivers/scsi/scsi_debug.c:4429
 scsi_debug_queuecommand+0x467/0x1390 drivers/scsi/scsi_debug.c:5835
 scsi_dispatch_cmd+0x3fc/0x9b0 drivers/scsi/scsi_lib.c:1896
 scsi_request_fn+0x1042/0x1810 drivers/scsi/scsi_lib.c:2034
 __blk_run_queue_uncond block/blk-core.c:464 [inline]
 __blk_run_queue+0x1a4/0x380 block/blk-core.c:484
 blk_execute_rq_nowait+0x1c2/0x2d0 block/blk-exec.c:78
 sg_common_write.isra.19+0xd74/0x1dc0 drivers/scsi/sg.c:847
 sg_write.part.23+0x6e0/0xd00 drivers/scsi/sg.c:716
 sg_write+0x64/0xa0 drivers/scsi/sg.c:622
 __vfs_write+0xed/0x690 fs/read_write.c:485
kill_bdev:block_device:00000000e138492c
 vfs_write+0x184/0x4c0 fs/read_write.c:549
 ksys_write+0x107/0x240 fs/read_write.c:599
 do_syscall_64+0xc2/0x560 arch/x86/entry/common.c:293
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

We get 'alen' from command its type is int. If userspace passes a large
length we will get a negative 'alen'.

Switch n, alen, and rlen to u32.

Link: https://lore.kernel.org/r/20211013033913.2551004-3-yebin10@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_debug: Fix out-of-bound read in resp_readcap16()

[ Upstream commit 4e3ace0051e7e504b55d239daab8789dd89b863c ]

The following warning was observed running syzkaller:

[ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in;
[ 3813.830724]    program syz-executor not setting count and/or reply_len properly
[ 3813.836956] ==================================================================
[ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0
[ 3813.841773] Read of size 4096 at addr ffff8883cf80f540 by task syz-executor/1549
[ 3813.846612] Call Trace:
[ 3813.846995]  dump_stack+0x108/0x15f
[ 3813.847524]  print_address_description+0xa5/0x372
[ 3813.848243]  kasan_report.cold+0x236/0x2a8
[ 3813.849439]  check_memory_region+0x240/0x270
[ 3813.850094]  memcpy+0x30/0x80
[ 3813.850553]  sg_copy_buffer+0x157/0x1e0
[ 3813.853032]  sg_copy_from_buffer+0x13/0x20
[ 3813.853660]  fill_from_dev_buffer+0x135/0x370
[ 3813.854329]  resp_readcap16+0x1ac/0x280
[ 3813.856917]  schedule_resp+0x41f/0x1630
[ 3813.858203]  scsi_debug_queuecommand+0xb32/0x17e0
[ 3813.862699]  scsi_dispatch_cmd+0x330/0x950
[ 3813.863329]  scsi_request_fn+0xd8e/0x1710
[ 3813.863946]  __blk_run_queue+0x10b/0x230
[ 3813.864544]  blk_execute_rq_nowait+0x1d8/0x400
[ 3813.865220]  sg_common_write.isra.0+0xe61/0x2420
[ 3813.871637]  sg_write+0x6c8/0xef0
[ 3813.878853]  __vfs_write+0xe4/0x800
[ 3813.883487]  vfs_write+0x17b/0x530
[ 3813.884008]  ksys_write+0x103/0x270
[ 3813.886268]  __x64_sys_write+0x77/0xc0
[ 3813.886841]  do_syscall_64+0x106/0x360
[ 3813.887415]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

This issue can be reproduced with the following syzkaller log:

r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0)
r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00')
open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000)
r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782)
write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126)

In resp_readcap16() we get "int alloc_len" value -1104926854, and then pass
the huge arr_len to fill_from_dev_buffer(), but arr is only 32 bytes. This
leads to OOB in sg_copy_buffer().

To solve this issue, define alloc_len as u32.

Link: https://lore.kernel.org/r/20211013033913.2551004-2-yebin10@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: sni: Fix the build

[ Upstream commit c91cf42f61dc77b289784ea7b15a8531defa41c0 ]

This patch fixes the following gcc 10 build error:

arch/mips/sni/time.c: In function ‘a20r_set_periodic’:
arch/mips/sni/time.c:15:26: error: unsigned conversion from ‘int’ to ‘u8’ {aka ‘volatile unsigned char’} changes value from ‘576’ to ‘64’ [-Werror=overflow]
   15 | #define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ)
      |                          ^
arch/mips/sni/time.c:21:45: note: in expansion of macro ‘SNI_COUNTER0_DIV’
   21 |  *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV;
      |                                             ^~~~~~~~~~~~~~~~

Cc: linux-mips@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc

[ Upstream commit 3968ddcf05fb4b9409cd1859feb06a5b0550a1c1 ]

When running ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
which look like this one:

  Workqueue: events_unbound flush_to_ldisc
  Call trace:
   dump_backtrace+0x0/0x1ec
   show_stack+0x24/0x30
   dump_stack+0xd0/0x128
   panic+0x15c/0x374
   watchdog_timer_fn+0x2b8/0x304
   __run_hrtimer+0x88/0x2c0
   __hrtimer_run_queues+0xa4/0x120
   hrtimer_interrupt+0xfc/0x270
   arch_timer_handler_phys+0x40/0x50
   handle_percpu_devid_irq+0x94/0x220
   __handle_domain_irq+0x88/0xf0
   gic_handle_irq+0x84/0xfc
   el1_irq+0xc8/0x180
   slip_unesc+0x80/0x214 [slip]
   tty_ldisc_receive_buf+0x64/0x80
   tty_port_default_receive_buf+0x50/0x90
   flush_to_ldisc+0xbc/0x110
   process_one_work+0x1d4/0x4b0
   worker_thread+0x180/0x430
   kthread+0x11c/0x120

In the testcase pty04, The first process call the write syscall to send
data to the pty master. At the same time, the workqueue will do the
flush_to_ldisc to pop data in a loop until there is no more data left.
When the sender and workqueue running in different core, the sender sends
data fastly in full time which will result in workqueue doing work in loop
for a long time and occuring softlockup in flush_to_ldisc with kernel
configured without preempt. So I add need_resched check and cond_resched
in the flush_to_ldisc loop to avoid it.

Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Link: https://lore.kernel.org/r/1633961304-24759-1-git-send-email-guanghuifeng@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Do not falsely log intel_iommu is unsupported kernel option

[ Upstream commit 5240aed2cd2594fb392239f11b9681e5e1591619 ]

Handling of intel_iommu kernel command line option should return "true" to
indicate option is valid and so avoid logging it as unknown by the core
parsing code.

Also log unknown sub-options at the notice level to let user know of
potential typos or similar.

Reported-by: Eero Tamminen <eero.t.tamminen@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://lore.kernel.org/r/20210831112947.310080-1-tvrtko.ursulin@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20211014053839.727419-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: ISA: not for M68K

[ Upstream commit 3c05f1477e62ea5a0a8797ba6a545b1dc751fb31 ]

On m68k, compiling drivers under SND_ISA causes build errors:

../sound/core/isadma.c: In function 'snd_dma_program':
../sound/core/isadma.c:33:17: error: implicit declaration of function 'claim_dma_lock' [-Werror=implicit-function-declaration]
   33 |         flags = claim_dma_lock();
      |                 ^~~~~~~~~~~~~~
../sound/core/isadma.c:41:9: error: implicit declaration of function 'release_dma_lock' [-Werror=implicit-function-declaration]
   41 |         release_dma_lock(flags);
      |         ^~~~~~~~~~~~~~~~

../sound/isa/sb/sb16_main.c: In function 'snd_sb16_playback_prepare':
../sound/isa/sb/sb16_main.c:253:72: error: 'DMA_AUTOINIT' undeclared (first use in this function)
  253 |         snd_dma_program(dma, runtime->dma_addr, size, DMA_MODE_WRITE | DMA_AUTOINIT);
      |                                                                        ^~~~~~~~~~~~
../sound/isa/sb/sb16_main.c:253:72: note: each undeclared identifier is reported only once for each function it appears in
../sound/isa/sb/sb16_main.c: In function 'snd_sb16_capture_prepare':
../sound/isa/sb/sb16_main.c:322:71: error: 'DMA_AUTOINIT' undeclared (first use in this function)
  322 |         snd_dma_program(dma, runtime->dma_addr, size, DMA_MODE_READ | DMA_AUTOINIT);
      |                                                                       ^~~~~~~~~~~~

and more...

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20211016062602.3588-1-rdunlap@infradead.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash

[ Upstream commit 05e63b48b20fa70726be505a7660d1a07bc1cffb ]

We cannot list all the possible chips used in different board revisions,
just use the generic "jedec,spi-nor" compatible instead.  This also
fixes dtbs_check error:
['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: ls1021a: move thermal-zones node out of soc/

[ Upstream commit 1ee1500ef717eefb5d9bdaf97905cb81b4e69aa4 ]

This fixes dtbs-check error from simple-bus schema:
soc: thermal-zones: {'type': 'object'} is not allowed for {'cpu-thermal': ..... }
        From schema: /home/leo/.local/lib/python3.8/site-packages/dtschema/schemas/simple-bus.yaml

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt5682: fix a little pop while playback

[ Upstream commit 4b19e4a77cc6baa0f840e8bae62ab974667f6207 ]

A little pop can be heard obviously from HP while playing a silent.
This patch fixes it by using two functions:
1. Enable HP 1bit output mode.
2. Change the charge pump switch size during playback on and off.

Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211014094054.811-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: ohci-tmio: check return value after calling platform_get_resource()

[ Upstream commit 9eff2b2e59fda25051ab36cd1cb5014661df657b ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211011134920.118477-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: omap: fix gpmc,mux-add-data type

[ Upstream commit 51b9e22ffd3c4c56cbb7caae9750f70e55ffa603 ]

gpmc,mux-add-data is not boolean.

Fixes the below errors flagged by dtbs_check.

"ethernet@4,0:gpmc,mux-add-data: True is not of type 'array'"

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Add support for the Pioneer DJM 750MK2 Mixer/Soundcard

[ Upstream commit 6d27788160362a7ee6c0d317636fe4b1ddbe59a7 ]

The kernel already has support for very similar Pioneer djm products
and this work is based on that.

Added device to quirks-table.h and added control info to
mixer_quirks.c.

Tested on my hardware and all working.

Signed-off-by: William Overton <willovertonuk@gmail.com>
Link: https://lore.kernel.org/r/20211010145841.11907-1-willovertonuk@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: multitouch: disable sticky fingers for UPERFECT Y

[ Upstream commit 08b9a61a87bc339a73c584d8924c86ab36d204a7 ]

When a finger is on the screen, the UPERFECT Y portable touchscreen
monitor reports a contact in the first place. However, after this
initial report, contacts are not reported at the refresh rate of the
screen as required by the Windows 8 specs.

This behaviour triggers the release_timer, removing the fingers even
though they are still present.

To avoid it, add a new class, similar to MT_CLS_WIN_8 but without the
MT_QUIRK_STICKY_FINGERS quirk for this device.

Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware_loader: fix pre-allocated buf built-in firmware use

[ Upstream commit f7a07f7b96033df7709042ff38e998720a3f7119 ]

The firmware_loader can be used with a pre-allocated buffer
through the use of the API calls:

  o request_firmware_into_buf()
  o request_partial_firmware_into_buf()

If the firmware was built-in and present, our current check
for if the built-in firmware fits into the pre-allocated buffer
does not return any errors, and we proceed to tell the caller
that everything worked fine. It's a lie and no firmware would
end up being copied into the pre-allocated buffer. So if the
caller trust the result it may end up writing a bunch of 0's
to a device!

Fix this by making the function that checks for the pre-allocated
buffer return non-void. Since the typical use case is when no
pre-allocated buffer is provided make this return successfully
for that case. If the built-in firmware does *not* fit into the
pre-allocated buffer size return a failure as we should have
been doing before.

I'm not aware of users of the built-in firmware using the API
calls with a pre-allocated buffer, as such I doubt this fixes
any real life issue. But you never know... perhaps some oddball
private tree might use it.

In so far as upstream is concerned this just fixes our code for
correctness.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210917182226.3532898-2-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: sof_sdw: add missing quirk for Dell SKU 0A45

[ Upstream commit 64ba6d2ce72ffde70dc5a1794917bf1573203716 ]

This device is based on SDCA codecs but with a single amplifier
instead of two.

BugLink: https://github.com/thesofproject/linux/issues/3161
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20211004213512.220836-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: soc-acpi: add missing quirk for TGL SDCA single amp

[ Upstream commit f2470679b070a77ea22f8b791fae7084c2340c7d ]

We don't have a configuration for a single amp on link1.

BugLink: https://github.com/thesofproject/linux/issues/3161
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20211004213512.220836-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec

[ Upstream commit 9d36ceab94151f07cf3fcb067213ac87937adf12 ]

These devices are based on an I2C/I2S device, we need to force the use
of the SOF driver otherwise the legacy HDaudio driver will be loaded -
only HDMI will be supported.

Co-developed-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211004213512.220836-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mm-kontron: Fix reset delays for ethernet PHY

[ Upstream commit 315e7b884190a6c9c28e95ad3b724dde9e922b99 ]

According to the datasheet the VSC8531 PHY expects a reset pulse of 100 ns
and a delay of 15 ms after the reset has been deasserted. Set the matching
values in the devicetree.

Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: smartpqi: Add controller handshake during kdump

[ Upstream commit 9ee5d6e9ac52a3c8625697535f8e35864d9fd38c ]

Correct kdump hangs when controller is locked up.

There are occasions when a controller reboot (controller soft reset) is
issued when a controller firmware crash dump is in progress.

This leads to incomplete controller firmware crash dump:

 - When the controller crash dump is in progress, and a kdump is initiated,
   the driver issues inbound doorbell reset to bring back the controller in
   SIS mode.

 - If the controller is in locked up state, the inbound doorbell reset does
   not work causing controller initialization failures. This results in the
   driver hanging waiting for SIS mode.

To avoid an incomplete controller crash dump, add in a controller crash
dump handshake:

 - Controller will indicate start and end of the controller crash dump by
   setting some register bits.

 - Driver will look these bits when a kdump is initiated.  If a controller
   crash dump is in progress, the driver will wait for the controller crash
   dump to complete before issuing the controller soft reset then complete
   driver initialization.

Link: https://lore.kernel.org/r/20210928235442.201875-3-don.brace@microchip.com
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: advansys: Fix kernel pointer leak

[ Upstream commit d4996c6eac4c81b8872043e9391563f67f13e406 ]

Pointers should be printed with %p or %px rather than cast to 'unsigned
long' and printed with %lx.

Change %lx to %p to print the hashed pointer.

Link: https://lore.kernel.org/r/20210929122538.1158235-1-qtxuning1999@sjtu.edu.cn
Signed-off-by: Guo Zhi <qtxuning1999@sjtu.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: nau8824: Add DMI quirk mechanism for active-high jack-detect

[ Upstream commit 92d3360108f1839ca40451bad20ff67dd24a1964 ]

Add a quirk mechanism to allow specifying that active-high jack-detection
should be used on platforms where this info is not available in devicetree.

And add an entry for the Cyberbook T116 tablet to the DMI table, so that
jack-detection will work properly on this tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211002211459.110124-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt5651: Use IRQF_NO_AUTOEN when requesting the IRQ

[ Upstream commit 6e037b72cf4ea6c28a131ea021d63ee4e7e6fa64 ]

Use the new IRQF_NO_AUTOEN flag when requesting the IRQ, rather then
disabling it immediately after requesting it.

This fixes a possible race where the IRQ might trigger between requesting
and disabling it; and this also leads to a small code cleanup.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211003132255.31743-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: es8316: Use IRQF_NO_AUTOEN when requesting the IRQ

[ Upstream commit 1cf2aa665901054b140eb71748661ceae99b6b5a ]

Use the new IRQF_NO_AUTOEN flag when requesting the IRQ, rather then
disabling it immediately after requesting it.

This fixes a possible race where the IRQ might trigger between requesting
and disabling it; and this also leads to a small code cleanup.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211003132255.31743-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: imx6ul: Move csi_sel mux to correct base register

[ Upstream commit 2f9d61869640f732599ec36b984c2b5c46067519 ]

The csi_sel mux register is located in the CCM register base and not the
CCM_ANALOG register base. So move it to the correct position in code.

Otherwise changing the parent of the csi clock can lead to a complete
system failure due to the CCM_ANALOG_PLL_SYS_TOG register being falsely
modified.

Also remove the SET_RATE_PARENT flag since one possible supply for the
csi_sel mux is the system PLL which we don't want to modify.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20210927072857.3940880-1-s.riedmueller@phytec.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: disable implicit feedback sync for Behringer UFX1204 and UFX1604

[ Upstream commit 28c369e60827f706cef4604a3e2848198f25bd26 ]

Behringer UFX1204 and UFX1604 have Synchronous endpoints to which
current ALSA code applies implicit feedback sync as if they were
Asynchronous endpoints. This breaks UAC compliance and is unneeded.

The commit 5e35dc0338d85ccebacf3f77eca1e5dea73155e8 and subsequent
1a15718b41df026cffd0e42cfdc38a1384ce19f9 were meant to clear up noise.

Unfortunately, noise persisted for those using higher sample rates and
this was only solved by commit d2e8f641257d0d3af6e45d6ac2d6f9d56b8ea964

Since there are no more reports of noise, let's get rid of the
implicit-fb quirks breaking UAC compliance.

Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Link: https://lore.kernel.org/r/YVYSnoQ7nxLXT0Dq@geday
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: core: Fix scsi_mode_sense() buffer length handling

[ Upstream commit 17b49bcbf8351d3dbe57204468ac34f033ed60bc ]

Several problems exist with scsi_mode_sense() buffer length handling:

 1) The allocation length field of the MODE SENSE(10) command is 16-bits,
    occupying bytes 7 and 8 of the CDB. With this command, access to mode
    pages larger than 255 bytes is thus possible. However, the CDB
    allocation length field is set by assigning len to byte 8 only, thus
    truncating buffer length larger than 255.

 2) If scsi_mode_sense() is called with len smaller than 8 with
    sdev->use_10_for_ms set, or smaller than 4 otherwise, the buffer length
    is increased to 8 and 4 respectively, and the buffer is zero filled
    with these increased values, thus corrupting the memory following the
    buffer.

Fix these 2 problems by using put_unaligned_be16() to set the allocation
length field of MODE SENSE(10) CDB and by returning an error when len is
too small.

Furthermore, if len is larger than 255B, always try MODE SENSE(10) first,
even if the device driver did not set sdev->use_10_for_ms. In case of
invalid opcode error for MODE SENSE(10), access to mode pages larger than
255 bytes are not retried using MODE SENSE(6). To avoid buffer length
overflows for the MODE_SENSE(10) case, check that len is smaller than 65535
bytes.

While at it, also fix the folowing:

 * Use get_unaligned_be16() to retrieve the mode data length and block
   descriptor length fields of the mode sense reply header instead of using
   an open coded calculation.

 * Fix the kdoc dbd argument explanation: the DBD bit stands for Disable
   Block Descriptor, which is the opposite of what the dbd argument
   description was.

Link: https://lore.kernel.org/r/20210820070255.682775-2-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: hda-dai: fix potential locking issue

[ Upstream commit a20f3b10de61add5e14b6ce4df982f4df2a4cbbc ]

The initial hdac_stream code was adapted a third time with the same
locking issues. Move the spin_lock outside the loops and make sure the
fields are protected on read/write.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210924192417.169243-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Separate HW and SW l/rkeys

[ Upstream commit 001345339f4ca85790a1644a74e33ae77ac116be ]

Separate software and simulated hardware lkeys and rkeys for MRs and MWs.
This makes struct ib_mr and struct ib_mw isolated from hardware changes
triggered by executing work requests.

This change fixes a bug seen in blktest.

Link: https://lore.kernel.org/r/20210914164206.19768-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ls1012a: Add serial alias for ls1012a-rdb

[ Upstream commit 7f31ae6e01da140e34d6513815253e811019f016 ]

U-boot atempts to read serial alias value for ls1012a-rdb but couldn't
do so as it is not initialised and thus, FDT_ERR_NOTFOUND error is
reported while booting linux.

Loading fdt from FIT Image at a0000000 ...
   Description:  ls1012ardb-dtb
     Type:         Flat Device Tree
     Data Start:   0xab111474
     Data Size:    11285 Bytes = 11 KiB
     Architecture: AArch64
     Load Address: 0x90000000
   Loading fdt from 0xab111474 to 0x90000000
   Booting using the fdt blob at 0x90000000
   Uncompressing Kernel Image
   Loading Device Tree to 000000008fffa000, end 000000008ffffc14 ... OK
WARNING: fdt_fixup_stdout: could not read serial0 alias: FDT_ERR_NOTFOUND
NOTICE:  RNG: INSTANTIATED

Starting kernel ...

Fix the above error by specifying serial value to duart.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: freescale: fix arm,sp805 compatible string

[ Upstream commit 99a7cacc66cae92db40139b57689be2af75fc6b8 ]

According to Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
the compatible is:
  compatible = "arm,sp805", "arm,primecell";

The current compatible string doesn't exist at all. Fix it.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm845: Fix qcom,controlled-remotely property

[ Upstream commit 1c8bf398b6b51eb085a49036ad8f9c000171cce1 ]

Property qcom,controlled-remotely should be boolean.  Fix it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829111628.5543-4-shawn.guo@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: ipq8074: Fix qcom,controlled-remotely property

[ Upstream commit 8c97f0ac4dc8f1743eb8e8a49f66189e13ae45e9 ]

Property qcom,controlled-remotely should be boolean.  Fix it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829111628.5543-3-shawn.guo@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: ipq6018: Fix qcom,controlled-remotely property

[ Upstream commit 3509de752ea14c7e5781b3a56a4a0bf832f5723a ]

Property qcom,controlled-remotely should be boolean.  Fix it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829111628.5543-2-shawn.guo@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8998: Fix CPU/L2 idle state latency and residency

[ Upstream commit 3f1dcaff642e75c1d2ad03f783fa8a3b1f56dd50 ]

The entry/exit latency and minimum residency in state for the idle
states of MSM8998 were ..bad: first of all, for all of them the
timings were written for CPU sleep but the min-residency-us param
was miscalculated (supposedly, while porting this from downstream);
Then, the power collapse states are setting PC on both the CPU
cluster *and* the L2 cache, which have different timings: in the
specific case of L2 the times are higher so these ones should be
taken into account instead of the CPU ones.

This parameter misconfiguration was not giving particular issues
because on MSM8998 there was no CPU scaling at all, so cluster/L2
power collapse was rarely (if ever) hit.
When CPU scaling is enabled, though, the wrong timings will produce
SoC unstability shown to the user as random, apparently error-less,
sudden reboots and/or lockups.

This set of parameters are stabilizing the SoC when CPU scaling is
ON and when power collapse is frequently hit.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901183123.1087392-3-angelogioacchino.delregno@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: BCM53016: Specify switch ports for Meraki MR32

[ Upstream commit 6abc4ca5a28070945e0d68cb4160b309bfbf4b8b ]

the switch identifies itself as a BCM53012 (rev 5)...
This patch has been tested & verified on OpenWrt's
snapshot with Linux 5.10 (didn't test any older kernels).
The MR32 is able to "talk to the network" as before with
OpenWrt's SWITCHDEV b53 driver.

| b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5
| libphy: dsa slave smi: probed
| b53-srab-switch 18007000.ethernet-switch poe (uninitialized):
| PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL)
| b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks.
| Please migrate to PHYLINK!
| DSA: tree 0 setup

Reported-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8723bs: remove a third possible deadlock

[ Upstream commit bdc1bbdbaa92df19a14d4c1902088c8432b46c6f ]

The assoc_timer takes the pmlmepriv->lock and various functions which
take the pmlmepriv->scanned_queue.lock first take the pmlmepriv->lock,
this means that we cannot have code which waits for the timer
(timer_del_sync) while holding the pmlmepriv->scanned_queue.lock
to avoid a triangle deadlock:

[  363.139361] ======================================================
[  363.139377] WARNING: possible circular locking dependency detected
[  363.139396] 5.15.0-rc1+ #470 Tainted: G         C  E
[  363.139413] ------------------------------------------------------
[  363.139424] RTW_CMD_THREAD/2466 is trying to acquire lock:
[  363.139441] ffffbacd00699038 (&pmlmepriv->lock){+.-.}-{2:2}, at: _rtw_join_timeout_handler+0x3c/0x160 [r8723bs]
[  363.139598]
               but task is already holding lock:
[  363.139610] ffffbacd00128ea0 ((&pmlmepriv->assoc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x5/0x260
[  363.139673]
               which lock already depends on the new lock.

[  363.139684]
               the existing dependency chain (in reverse order) is:
[  363.139696]
               -> #2 ((&pmlmepriv->assoc_timer)){+.-.}-{0:0}:
[  363.139734]        del_timer_sync+0x59/0x100
[  363.139762]        rtw_joinbss_event_prehandle+0x342/0x640 [r8723bs]
[  363.139870]        report_join_res+0xdf/0x110 [r8723bs]
[  363.139980]        OnAssocRsp+0x17a/0x200 [r8723bs]
[  363.140092]        rtw_recv_entry+0x190/0x1120 [r8723bs]
[  363.140209]        rtl8723b_process_phy_info+0x3f9/0x750 [r8723bs]
[  363.140318]        tasklet_action_common.constprop.0+0xe8/0x110
[  363.140345]        __do_softirq+0xde/0x485
[  363.140372]        __irq_exit_rcu+0xd0/0x100
[  363.140393]        irq_exit_rcu+0xa/0x20
[  363.140413]        common_interrupt+0x83/0xa0
[  363.140440]        asm_common_interrupt+0x1e/0x40
[  363.140463]        finish_task_switch.isra.0+0x157/0x3d0
[  363.140492]        __schedule+0x447/0x1880
[  363.140516]        schedule+0x59/0xc0
[  363.140537]        smpboot_thread_fn+0x161/0x1c0
[  363.140565]        kthread+0x143/0x160
[  363.140585]        ret_from_fork+0x22/0x30
[  363.140614]
               -> #1 (&pmlmepriv->scanned_queue.lock){+.-.}-{2:2}:
[  363.140653]        _raw_spin_lock_bh+0x34/0x40
[  363.140675]        rtw_free_network_queue+0x31/0x80 [r8723bs]
[  363.140776]        rtw_sitesurvey_cmd+0x79/0x1e0 [r8723bs]
[  363.140869]        rtw_cfg80211_surveydone_event_callback+0x3cf/0x470 [r8723bs]
[  363.140973]        rdev_scan+0x42/0x1a0 [cfg80211]
[  363.141307]        nl80211_trigger_scan+0x566/0x660 [cfg80211]
[  363.141635]        genl_family_rcv_msg_doit+0xcd/0x110
[  363.141661]        genl_rcv_msg+0xce/0x1c0
[  363.141680]        netlink_rcv_skb+0x50/0xf0
[  363.141699]        genl_rcv+0x24/0x40
[  363.141717]        netlink_unicast+0x16d/0x230
[  363.141736]        netlink_sendmsg+0x22b/0x450
[  363.141755]        sock_sendmsg+0x5e/0x60
[  363.141781]        ____sys_sendmsg+0x22f/0x270
[  363.141803]        ___sys_sendmsg+0x81/0xc0
[  363.141828]        __sys_sendmsg+0x49/0x80
[  363.141851]        do_syscall_64+0x3b/0x90
[  363.141873]        entry_SYSCALL_64_after_hwframe+0x44/0xae
[  363.141895]
               -> #0 (&pmlmepriv->lock){+.-.}-{2:2}:
[  363.141930]        __lock_acquire+0x1158/0x1de0
[  363.141954]        lock_acquire+0xb5/0x2b0
[  363.141974]        _raw_spin_lock_bh+0x34/0x40
[  363.141993]        _rtw_join_timeout_handler+0x3c/0x160 [r8723bs]
[  363.142097]        call_timer_fn+0x94/0x260
[  363.142122]        __run_timers.part.0+0x1bf/0x290
[  363.142147]        run_timer_softirq+0x26/0x50
[  363.142171]        __do_softirq+0xde/0x485
[  363.142193]        __irq_exit_rcu+0xd0/0x100
[  363.142215]        irq_exit_rcu+0xa/0x20
[  363.142235]        sysvec_apic_timer_interrupt+0x72/0x90
[  363.142260]        asm_sysvec_apic_timer_interrupt+0x12/0x20
[  363.142283]        __module_address.part.0+0x0/0xd0
[  363.142309]        is_module_address+0x25/0x40
[  363.142334]        static_obj+0x4f/0x60
[  363.142361]        lockdep_init_map_type+0x47/0x220
[  363.142382]        __init_swait_queue_head+0x45/0x60
[  363.142408]        mmc_wait_for_req+0x4a/0xc0 [mmc_core]
[  363.142504]        mmc_wait_for_cmd+0x55/0x70 [mmc_core]
[  363.142592]        mmc_io_rw_direct+0x75/0xe0 [mmc_core]
[  363.142691]        sdio_writeb+0x2e/0x50 [mmc_core]
[  363.142788]        _sd_cmd52_write+0x62/0x80 [r8723bs]
[  363.142885]        sd_cmd52_write+0x6c/0xb0 [r8723bs]
[  363.142981]        rtl8723bs_set_hal_ops+0x982/0x9b0 [r8723bs]
[  363.143089]        rtw_write16+0x1e/0x30 [r8723bs]
[  363.143184]        SetHwReg8723B+0xcc9/0xd30 [r8723bs]
[  363.143294]        mlmeext_joinbss_event_callback+0x17a/0x1a0 [r8723bs]
[  363.143405]        rtw_joinbss_event_callback+0x11/0x20 [r8723bs]
[  363.143507]        mlme_evt_hdl+0x4d/0x70 [r8723bs]
[  363.143620]        rtw_cmd_thread+0x168/0x3c0 [r8723bs]
[  363.143712]        kthread+0x143/0x160
[  363.143732]        ret_from_fork+0x22/0x30
[  363.143757]
               other info that might help us debug this:

[  363.143768] Chain exists of:
                 &pmlmepriv->lock --> &pmlmepriv->scanned_queue.lock --> (&pmlmepriv->assoc_timer)

[  363.143809]  Possible unsafe locking scenario:

[  363.143819]        CPU0                    CPU1
[  363.143831]        ----                    ----
[  363.143841]   lock((&pmlmepriv->assoc_timer));
[  363.143862]                                lock(&pmlmepriv->scanned_queue.lock);
[  363.143882]                                lock((&pmlmepriv->assoc_timer));
[  363.143902]   lock(&pmlmepriv->lock);
[  363.143921]
                *** DEADLOCK ***

Make rtw_joinbss_event_prehandle() release the scanned_queue.lock before
it deletes the timer to avoid this (it is still holding pmlmepriv->lock
protecting against racing the timer).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920145502.155454-3-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8723bs: remove a second possible deadlock

[ Upstream commit a7ac783c338bafc04d3259600646350dba989043 ]

Lockdep complains about rtw_free_assoc_resources() taking the sta_hash_lock
followed by it calling rtw_free_stainfo() which takes xmitpriv->lock.
While the rtl8723bs_xmit_thread takes the sta_hash_lock while already
holding the xmitpriv->lock:

[  103.849756] ======================================================
[  103.849761] WARNING: possible circular locking dependency detected
[  103.849767] 5.15.0-rc1+ #470 Tainted: G         C  E
[  103.849773] ------------------------------------------------------
[  103.849776] wpa_supplicant/695 is trying to acquire lock:
[  103.849781] ffffa5d0c0562b00 (&pxmitpriv->lock){+.-.}-{2:2}, at: rtw_free_stainfo+0x8a/0x510 [r8723bs]
[  103.849840]
               but task is already holding lock:
[  103.849843] ffffa5d0c05636a8 (&pstapriv->sta_hash_lock){+.-.}-{2:2}, at: rtw_free_assoc_resources+0x48/0x110 [r8723bs]
[  103.849881]
               which lock already depends on the new lock.

[  103.849884]
               the existing dependency chain (in reverse order) is:
[  103.849887]
               -> #1 (&pstapriv->sta_hash_lock){+.-.}-{2:2}:
[  103.849898]        _raw_spin_lock_bh+0x34/0x40
[  103.849913]        rtw_get_stainfo+0x93/0x110 [r8723bs]
[  103.849948]        rtw_make_wlanhdr+0x14a/0x270 [r8723bs]
[  103.849983]        rtw_xmitframe_coalesce+0x5c/0x6c0 [r8723bs]
[  103.850019]        rtl8723bs_xmit_thread+0x4ac/0x620 [r8723bs]
[  103.850050]        kthread+0x143/0x160
[  103.850058]        ret_from_fork+0x22/0x30
[  103.850067]
               -> #0 (&pxmitpriv->lock){+.-.}-{2:2}:
[  103.850077]        __lock_acquire+0x1158/0x1de0
[  103.850084]        lock_acquire+0xb5/0x2b0
[  103.850090]        _raw_spin_lock_bh+0x34/0x40
[  103.850095]        rtw_free_stainfo+0x8a/0x510 [r8723bs]
[  103.850130]        rtw_free_assoc_resources+0x53/0x110 [r8723bs]
[  103.850159]        PHY_IQCalibrate_8723B+0x122b/0x36a0 [r8723bs]
[  103.850189]        cfg80211_disconnect+0x173/0x320 [cfg80211]
[  103.850331]        nl80211_disconnect+0x6e/0xb0 [cfg80211]
[  103.850422]        genl_family_rcv_msg_doit+0xcd/0x110
[  103.850430]        genl_rcv_msg+0xce/0x1c0
[  103.850435]        netlink_rcv_skb+0x50/0xf0
[  103.850441]        genl_rcv+0x24/0x40
[  103.850446]        netlink_unicast+0x16d/0x230
[  103.850452]        netlink_sendmsg+0x22b/0x450
[  103.850457]        sock_sendmsg+0x5e/0x60
[  103.850465]        ____sys_sendmsg+0x22f/0x270
[  103.850472]        ___sys_sendmsg+0x81/0xc0
[  103.850479]        __sys_sendmsg+0x49/0x80
[  103.850485]        do_syscall_64+0x3b/0x90
[  103.850493]        entry_SYSCALL_64_after_hwframe+0x44/0xae
[  103.850500]
               other info that might help us debug this:

[  103.850504]  Possible unsafe locking scenario:

[  103.850507]        CPU0                    CPU1
[  103.850510]        ----                    ----
[  103.850512]   lock(&pstapriv->sta_hash_lock);
[  103.850518]                                lock(&pxmitpriv->lock);
[  103.850524]                                lock(&pstapriv->sta_hash_lock);
[  103.850530]   lock(&pxmitpriv->lock);
[  103.850535]
                *** DEADLOCK ***

Push the taking of sta_hash_lock down into rtw_free_stainfo(),
where the critical section is, this allows taking the lock after
rtw_free_stainfo() has released pxmitpriv->lock.

This requires changing rtw_free_all_stainfo() so that it does its freeing
in 2 steps, first moving all stainfo-s to free to a local list while
holding the sta_hash_lock and then walking that list to call
rtw_free_stainfo() on them without holding the sta_hash_lock.

Pushing the taking of sta_hash_lock down into rtw_free_stainfo(),
also fixes a whole bunch of callers of rtw_free_stainfo() which
were not holding that lock even though they should.

Note that this also fixes the deadlock from the "remove possible
deadlock when disconnect" patch in a different way. But the
changes from that patch offer a nice locking cleanup regardless.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920145502.155454-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8723bs: remove possible deadlock when disconnect (v2)

[ Upstream commit 54659ca026e586bbb33a7e60daa6443a3ac6b5df ]

when turning off a connection, lockdep complains with the
following warning (a modprobe has been done but the same
happens with a disconnection from NetworkManager,
it's enough to trigger a cfg80211_disconnect call):

[  682.855867] ======================================================
[  682.855877] WARNING: possible circular locking dependency detected
[  682.855887] 5.14.0-rc6+ #16 Tainted: G         C OE
[  682.855898] ------------------------------------------------------
[  682.855906] modprobe/1770 is trying to acquire lock:
[  682.855916] ffffb6d000332b00 (&pxmitpriv->lock){+.-.}-{2:2},
at: rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.856073]
               but task is already holding lock:
[  682.856081] ffffb6d0003336a8 (&pstapriv->sta_hash_lock){+.-.}-{2:2},
at: rtw_free_assoc_resources+0x48/0x110 [r8723bs]
[  682.856207]
               which lock already depends on the new lock.

[  682.856215]
               the existing dependency chain (in reverse order) is:
[  682.856223]
               -> #1 (&pstapriv->sta_hash_lock){+.-.}-{2:2}:
[  682.856247]        _raw_spin_lock_bh+0x34/0x40
[  682.856265]        rtw_get_stainfo+0x9a/0x110 [r8723bs]
[  682.856389]        rtw_xmit_classifier+0x27/0x130 [r8723bs]
[  682.856515]        rtw_xmitframe_enqueue+0xa/0x20 [r8723bs]
[  682.856642]        rtl8723bs_hal_xmit+0x3b/0xb0 [r8723bs]
[  682.856752]        rtw_xmit+0x4ef/0x890 [r8723bs]
[  682.856879]        _rtw_xmit_entry+0xba/0x350 [r8723bs]
[  682.856981]        dev_hard_start_xmit+0xee/0x320
[  682.856999]        sch_direct_xmit+0x8c/0x330
[  682.857014]        __dev_queue_xmit+0xba5/0xf00
[  682.857030]        packet_sendmsg+0x981/0x1b80
[  682.857047]        sock_sendmsg+0x5b/0x60
[  682.857060]        __sys_sendto+0xf1/0x160
[  682.857073]        __x64_sys_sendto+0x24/0x30
[  682.857087]        do_syscall_64+0x3a/0x80
[  682.857102]        entry_SYSCALL_64_after_hwframe+0x44/0xae
[  682.857117]
               -> #0 (&pxmitpriv->lock){+.-.}-{2:2}:
[  682.857142]        __lock_acquire+0xfd9/0x1b50
[  682.857158]        lock_acquire+0xb4/0x2c0
[  682.857172]        _raw_spin_lock_bh+0x34/0x40
[  682.857185]        rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.857308]        rtw_free_assoc_resources+0x53/0x110 [r8723bs]
[  682.857415]        cfg80211_rtw_disconnect+0x4b/0x70 [r8723bs]
[  682.857522]        cfg80211_disconnect+0x12e/0x2f0 [cfg80211]
[  682.857759]        cfg80211_leave+0x2b/0x40 [cfg80211]
[  682.857961]        cfg80211_netdev_notifier_call+0xa9/0x560 [cfg80211]
[  682.858163]        raw_notifier_call_chain+0x41/0x50
[  682.858180]        __dev_close_many+0x62/0x100
[  682.858195]        dev_close_many+0x7d/0x120
[  682.858209]        unregister_netdevice_many+0x416/0x680
[  682.858225]        unregister_netdevice_queue+0xab/0xf0
[  682.858240]        unregister_netdev+0x18/0x20
[  682.858255]        rtw_unregister_netdevs+0x28/0x40 [r8723bs]
[  682.858360]        rtw_dev_remove+0x24/0xd0 [r8723bs]
[  682.858463]        sdio_bus_remove+0x31/0xd0 [mmc_core]
[  682.858532]        device_release_driver_internal+0xf7/0x1d0
[  682.858550]        driver_detach+0x47/0x90
[  682.858564]        bus_remove_driver+0x77/0xd0
[  682.858579]        rtw_drv_halt+0xc/0x678 [r8723bs]
[  682.858685]        __x64_sys_delete_module+0x13f/0x250
[  682.858699]        do_syscall_64+0x3a/0x80
[  682.858715]        entry_SYSCALL_64_after_hwframe+0x44/0xae
[  682.858729]
               other info that might help us debug this:

[  682.858737]  Possible unsafe locking scenario:

[  682.858744]        CPU0                    CPU1
[  682.858751]        ----                    ----
[  682.858758]   lock(&pstapriv->sta_hash_lock);
[  682.858772]                                lock(&pxmitpriv->lock);
[  682.858786]                                lock(&pstapriv->sta_hash_lock);
[  682.858799]   lock(&pxmitpriv->lock);
[  682.858812]
                *** DEADLOCK ***

[  682.858820] 5 locks held by modprobe/1770:
[  682.858831]  #0: ffff8d870697d980 (&dev->mutex){....}-{3:3},
at: device_release_driver_internal+0x1a/0x1d0
[  682.858869]  #1: ffffffffbdbbf1c8 (rtnl_mutex){+.+.}-{3:3},
at: unregister_netdev+0xe/0x20
[  682.858906]  #2: ffff8d87054ee5e8 (&rdev->wiphy.mtx){+.+.}-{3:3},
at: cfg80211_netdev_notifier_call+0x9e/0x560 [cfg80211]
[  682.859131]  #3: ffff8d870f2bc8f0 (&wdev->mtx){+.+.}-{3:3},
at: cfg80211_leave+0x20/0x40 [cfg80211]
[  682.859354]  #4: ffffb6d0003336a8 (&pstapriv->sta_hash_lock){+.-.}-{2:2},
at: rtw_free_assoc_resources+0x48/0x110 [r8723bs]
[  682.859482]
               stack backtrace:
[  682.859491] CPU: 1 PID: 1770 Comm: modprobe Tainted: G
C OE     5.14.0-rc6+ #16
[  682.859507] Hardware name: LENOVO 80NR/Madrid, BIOS DACN25WW 08/20/2015
[  682.859517] Call Trace:
[  682.859531]  dump_stack_lvl+0x56/0x6f
[  682.859551]  check_noncircular+0xdb/0xf0
[  682.859579]  __lock_acquire+0xfd9/0x1b50
[  682.859606]  lock_acquire+0xb4/0x2c0
[  682.859623]  ? rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.859752]  ? mark_held_locks+0x48/0x70
[  682.859769]  ? rtw_free_stainfo+0x4a/0x4a0 [r8723bs]
[  682.859898]  _raw_spin_lock_bh+0x34/0x40
[  682.859914]  ? rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.860039]  rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.860171]  rtw_free_assoc_resources+0x53/0x110 [r8723bs]
[  682.860286]  cfg80211_rtw_disconnect+0x4b/0x70 [r8723bs]
[  682.860397]  cfg80211_disconnect+0x12e/0x2f0 [cfg80211]
[  682.860629]  cfg80211_leave+0x2b/0x40 [cfg80211]
[  682.860836]  cfg80211_netdev_notifier_call+0xa9/0x560 [cfg80211]
[  682.861048]  ? __lock_acquire+0x4dc/0x1b50
[  682.861070]  ? lock_is_held_type+0xa8/0x110
[  682.861089]  ? lock_is_held_type+0xa8/0x110
[  682.861104]  ? find_held_lock+0x2d/0x90
[  682.861120]  ? packet_notifier+0x173/0x300
[  682.861141]  ? lock_release+0xb3/0x250
[  682.861160]  ? packet_notifier+0x192/0x300
[  682.861184]  raw_notifier_call_chain+0x41/0x50
[  682.861205]  __dev_close_many+0x62/0x100
[  682.861224]  dev_close_many+0x7d/0x120
[  682.861245]  unregister_netdevice_many+0x416/0x680
[  682.861264]  ? find_held_lock+0x2d/0x90
[  682.861284]  unregister_netdevice_queue+0xab/0xf0
[  682.861306]  unregister_netdev+0x18/0x20
[  682.861325]  rtw_unregister_netdevs+0x28/0x40 [r8723bs]
[  682.861434]  rtw_dev_remove+0x24/0xd0 [r8723bs]
[  682.861542]  sdio_bus_remove+0x31/0xd0 [mmc_core]
[  682.861615]  device_release_driver_internal+0xf7/0x1d0
[  682.861637]  driver_detach+0x47/0x90
[  682.861656]  bus_remove_driver+0x77/0xd0
[  682.861674]  rtw_drv_halt+0xc/0x678 [r8723bs]
[  682.861782]  __x64_sys_delete_module+0x13f/0x250
[  682.861801]  ? lockdep_hardirqs_on_prepare+0xf3/0x170
[  682.861817]  ? syscall_enter_from_user_mode+0x20/0x70
[  682.861836]  do_syscall_64+0x3a/0x80
[  682.861855]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  682.861873] RIP: 0033:0x7f6dbe85400b
[  682.861890] Code: 73 01 c3 48 8b 0d 6d 1e 0c 00 f7 d8 64 89
01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa
b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d
1e 0c 00 f7 d8 64 89 01 48
[  682.861906] RSP: 002b:00007ffe7a82f538 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[  682.861923] RAX: ffffffffffffffda RBX: 000055a64693bd20 RCX: 00007f6dbe85400b
[  682.861935] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055a64693bd88
[  682.861946] RBP: 000055a64693bd20 R08: 0000000000000000 R09: 0000000000000000
[  682.861957] R10: 00007f6dbe8c7ac0 R11: 0000000000000206 R12: 000055a64693bd88
[  682.861967] R13: 0000000000000000 R14: 000055a64693bd88 R15: 00007ffe7a831848

This happens because when we enqueue a frame for
transmission we do it under xmit_priv lock, then calling
rtw_get_stainfo (needed for enqueuing) takes sta_hash_lock
and this leads to the following lock dependency:

xmit_priv->lock -> sta_hash_lock

Turning off a connection will bring to call
rtw_free_assoc_resources which will set up
the inverse dependency:

sta_hash_lock -> xmit_priv_lock

This could lead to a deadlock as lockdep complains.

Fix it by removing the xmit_priv->lock around
rtw_xmitframe_enqueue call inside rtl8723bs_hal_xmit
and put it in a smaller critical section inside
rtw_xmit_classifier, the only place where
xmit_priv data are actually accessed.

Replace spin_{lock,unlock}_bh(pxmitpriv->lock)
in other tx paths leading to rtw_xmitframe_enqueue
call with spin_{lock,unlock}_bh(psta->sleep_q.lock)
- it's not clear why accessing a sleep_q was protected
by a spinlock on xmitpriv->lock.

This way is avoided the same faulty lock nesting
order.

Extra changes in v2 by Hans de Goede:
-Lift the taking of the struct __queue.lock spinlock out of
 rtw_free_xmitframe_queue() into the callers this allows also
 protecting a bunch of related state in rtw_free_stainfo():
-Protect psta->sleepq_len on rtw_free_xmitframe_queue(&psta->sleep_q);
-Protect struct tx_servq.tx_pending and tx_servq.qcnt when
 calling rtw_free_xmitframe_queue(&tx_servq.sta_pending)
-This also allows moving the spin_lock_bh(&pxmitpriv->lock); to below
 the sleep_q free-ing code, avoiding another ABBA locking issue

CC: Larry Finger <Larry.Finger@lwfinger.net>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Tested-on: Lenovo Ideapad MiiX 300-10IBY
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920145502.155454-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: ux500: Skomer regulator fixes

[ Upstream commit 7aee0288beab72cdfa35af51f62e94373fca595d ]

AUX2 has slightly wrong voltage and AUX5 doesn't need to be
always on.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: tipd: Remove WARN_ON in tps6598x_block_read

[ Upstream commit b7a0a63f3fed57d413bb857de164ea9c3984bc4e ]

Calling tps6598x_block_read with a higher than allowed len can be
handled by just returning an error. There's no need to crash systems
with panic-on-warn enabled.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20210914140235.65955-3-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: musb: tusb6010: check return value after calling platform_get_resource()

[ Upstream commit 14651496a3de6807a17c310f63c894ea0c5d858e ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210915034925.2399823-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Use context lost quirk for otg

[ Upstream commit 9067839ff45a528bcb015cc2f24f656126b91e3f ]

Let's use SYSC_QUIRK_REINIT_ON_CTX_LOST quirk for am335x otg instead of
SYSC_QUIRK_REINIT_ON_RESUME quirk as we can now handle the context loss
in a more generic way.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Add quirk handling for reinit on context lost

[ Upstream commit 9d881361206ebcf6285c2ec2ef275aff80875347 ]

Some interconnect target modules such as otg and gpmc on am335x need a
re-init after resume. As we also have PM runtime cases where the context
may be lost, let's handle these all with cpu_pm.

For the am335x resume path, we already have cpu_pm_resume() call
cpu_pm_cluster_exit().

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/bnxt_re: Check if the vlan is valid before reporting

[ Upstream commit 6bda39149d4b8920fdb8744090653aca3daa792d ]

When VF is configured with default vlan, HW strips the vlan from the
packet and driver receives it in Rx completion. VLAN needs to be reported
for UD work completion only if the vlan is configured on the host. Add a
check for valid vlan in the UD receive path.

Link: https://lore.kernel.org/r/1631709163-2287-12-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: hisilicon: fix arm,sp805 compatible string

[ Upstream commit 894d4f1f77d0e88f1f81af2e1e37333c1c41b631 ]

According to Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
the compatible is:
  compatible = "arm,sp805", "arm,primecell";

The current compatible string doesn't exist at all. Fix it.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: Disable CDN DP on Pinebook Pro

[ Upstream commit 2513fa5c25d42f55ca5f0f0ab247af7c9fbfa3b1 ]

The CDN DP needs a PHY and a extcon to work correctly. But no extcon is
provided by the device-tree, which leads to an error:
cdn-dp fec00000.dp: [drm:cdn_dp_probe [rockchipdrm]] *ERROR* missing extcon or phy
cdn-dp: probe of fec00000.dp failed with error -22

Disable the CDN DP to make graphic work on the Pinebook Pro.

Reported-by: Guillaume Gardet <guillaume.gardet@arm.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Link: https://lore.kernel.org/r/20210715164101.11486-1-matthias.bgg@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: mt8195: Add missing of_node_put()

[ Upstream commit b2fc2c92d2fd34d93268f677e514936f50dd6b5c ]

The platform_node is returned by of_parse_phandle() should have
of_node_put() before return.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Link: https://lore.kernel.org/r/20210911081246.33867-1-cuibixuan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()

[ Upstream commit 99154581b05c8fb22607afb7c3d66c1bace6aa5d ]

When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass
the requests to the adapter. If such an attempt fails, a local "fail_msg"
string is set and a log message output.  The job is then added to a
completions list for cancellation.

Processing of any further jobs from the txq list continues, but since
"fail_msg" remains set, jobs are added to the completions list regardless
of whether a wqe was passed to the adapter.  If successfully added to
txcmplq, jobs are added to both lists resulting in list corruption.

Fix by clearing the fail_msg string after adding a job to the completions
list. This stops the subsequent jobs from being added to the completions
list unless they had an appropriate failure.

Link: https://lore.kernel.org/r/20210910233159.115896-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm80xx: Fix memory leak during rmmod

[ Upstream commit 51e6ed83bb4ade7c360551fa4ae55c4eacea354b ]

Driver failed to release all memory allocated. This would lead to memory
leak during driver removal.

Properly free memory when the module is removed.

Link: https://lore.kernel.org/r/20210906170404.5682-5-Ajish.Koshy@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: broadcom: bcm4908: Move reboot syscon out of bus

[ Upstream commit 6cf9f70255b90b540b9cbde062f18fea29024a75 ]

This fixes following error for every bcm4908 DTS file:
bus@ff800000: reboot: {'type': 'object'} is not allowed for {'compatible': ['syscon-reboot'], 'regmap': [[15]], 'offset': [[52]], 'mask': [[1]]}

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: NSP: Fix mpcore, mmc node names

[ Upstream commit 15a563d008ef9d04df525f0c476cd7d7127bb883 ]

Running dtbs_check yielded the issues with bcm-nsp.dtsi.

Firstly this patch fixes the following message by appending "-bus" to
the mpcore node name:
mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Secondly mmc node name. The label name can remain as is.
sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$'

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM5301X: Fix MDIO mux binding

[ Upstream commit 6ee0b56f7530e0ebb496fe15d0b54c5f3a1b5e17 ]

This fixes following error for all BCM5301X dts files:
mdio-bus-mux@18003000: compatible: ['mdio-mux-mmioreg'] is too short

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM5301X: Fix nodes names

[ Upstream commit 9dba049b6d32e95c0dd2a0d607f593ea288ac140 ]

This fixes following errors for all BCM5301X dts files:
chipcommonA@18000000: $nodename:0: 'chipcommonA@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
mdio-bus-mux@18003000: $nodename:0: 'mdio-bus-mux@18003000' does not match '^mdio-mux[\\-@]?'
dmu@1800c000: $nodename:0: 'dmu@1800c000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: wfx: ensure IRQ is ready before enabling it

[ Upstream commit 5e57c668dc097c6c27c973504706edec53f79281 ]

Since commit 5561770f80b1 ("staging: wfx: repair external IRQ for
SDIO"), wfx_sdio_irq_subscribe() enforce the device to use IRQs.
However, there is currently a race in this code. An IRQ may happen
before the IRQ has been registered.

The problem has observed during debug session when the device crashes
before the IRQ set up:

    [ 1.546] wfx-sdio mmc0:0001:1: started firmware 3.12.2 "WF200_ASIC_WFM_(Jenkins)_FW3.12.2" (API: 3.7, keyset: C0, caps: 0x00000002)
    [ 2.559] wfx-sdio mmc0:0001:1: time out while polling control register
    [ 3.565] wfx-sdio mmc0:0001:1: chip is abnormally long to answer
    [ 6.563] wfx-sdio mmc0:0001:1: chip did not answer
    [ 6.568] wfx-sdio mmc0:0001:1: hardware request CONFIGURATION (0x09) on vif 2 returned error -110
    [ 6.577] wfx-sdio mmc0:0001:1: PDS bytes 0 to 12: chip didn't reply (corrupted file?)
    [ 6.585] Unable to handle kernel NULL pointer dereference at virtual address 00000000
    [ 6.592] pgd = c0004000
    [ 6.595] [00000000] *pgd=00000000
    [ 6.598] Internal error: Oops - BUG: 17 [#1] THUMB2
    [ 6.603] Modules linked in:
    [ 6.606] CPU: 0 PID: 23 Comm: kworker/u2:1 Not tainted 3.18.19 #78
    [ 6.612] Workqueue: kmmcd mmc_rescan
    [ 6.616] task: c176d100 ti: c0e50000 task.ti: c0e50000
    [ 6.621] PC is at wake_up_process+0xa/0x14
    [ 6.625] LR is at sdio_irq+0x61/0x250
    [ 6.629] pc : [<c001e8ae>] lr : [<c00ec5bd>] psr: 600001b3
    [ 6.629] sp : c0e51bd8 ip : c0e51cc8 fp : 00000001
    [ 6.640] r10: 00000003 r9 : 00000000 r8 : c0003c34
    [ 6.644] r7 : c0e51bd8 r6 : c0003c30 r5 : 00000001 r4 : c0e78c00
    [ 6.651] r3 : 00000000 r2 : 00000000 r1 : 00000003 r0 : 00000000
    [ 6.657] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA Thumb Segment kernel
    [ 6.664] Control: 50c53c7d Table: 11fd8059 DAC: 00000015
    [ 6.670] Process kworker/u2:1 (pid: 23, stack limit = 0xc0e501b0)
    [ 6.676] Stack: (0xc0e51bd8 to 0xc0e52000)
    [...]
    [ 6.949] [<c001e8ae>] (wake_up_process) from [<c00ec5bd>] (sdio_irq+0x61/0x250)
    [ 6.956] [<c00ec5bd>] (sdio_irq) from [<c0025099>] (handle_irq_event_percpu+0x17/0x92)
    [ 6.964] [<c0025099>] (handle_irq_event_percpu) from [<c002512f>] (handle_irq_event+0x1b/0x24)
    [ 6.973] [<c002512f>] (handle_irq_event) from [<c0026577>] (handle_level_irq+0x5d/0x76)
    [ 6.981] [<c0026577>] (handle_level_irq) from [<c0024cc3>] (generic_handle_irq+0x13/0x1c)
    [ 6.989] [<c0024cc3>] (generic_handle_irq) from [<c0024dd9>] (__handle_domain_irq+0x31/0x48)
    [ 6.997] [<c0024dd9>] (__handle_domain_irq) from [<c0008359>] (ov_handle_irq+0x31/0xe0)
    [ 7.005] [<c0008359>] (ov_handle_irq) from [<c000af5b>] (__irq_svc+0x3b/0x5c)
    [ 7.013] Exception stack(0xc0e51c68 to 0xc0e51cb0)
    [...]
    [ 7.038] [<c000af5b>] (__irq_svc) from [<c01775aa>] (wait_for_common+0x9e/0xc4)
    [ 7.045] [<c01775aa>] (wait_for_common) from [<c00e1dc3>] (mmc_wait_for_req+0x4b/0xdc)
    [ 7.053] [<c00e1dc3>] (mmc_wait_for_req) from [<c00e1e83>] (mmc_wait_for_cmd+0x2f/0x34)
    [ 7.061] [<c00e1e83>] (mmc_wait_for_cmd) from [<c00e7b2b>] (mmc_io_rw_direct_host+0x71/0xac)
    [ 7.070] [<c00e7b2b>] (mmc_io_rw_direct_host) from [<c00e8f79>] (sdio_claim_irq+0x6b/0x116)
    [ 7.078] [<c00e8f79>] (sdio_claim_irq) from [<c00d8415>] (wfx_sdio_irq_subscribe+0x19/0x94)
    [ 7.086] [<c00d8415>] (wfx_sdio_irq_subscribe) from [<c00d5229>] (wfx_probe+0x189/0x2ac)
    [ 7.095] [<c00d5229>] (wfx_probe) from [<c00d83bf>] (wfx_sdio_probe+0x8f/0xcc)
    [ 7.102] [<c00d83bf>] (wfx_sdio_probe) from [<c00e7fbb>] (sdio_bus_probe+0x5f/0xa8)
    [ 7.109] [<c00e7fbb>] (sdio_bus_probe) from [<c00be229>] (driver_probe_device+0x59/0x134)
    [ 7.118] [<c00be229>] (driver_probe_device) from [<c00bd4d7>] (bus_for_each_drv+0x3f/0x4a)
    [ 7.126] [<c00bd4d7>] (bus_for_each_drv) from [<c00be1a5>] (device_attach+0x3b/0x52)
    [ 7.134] [<c00be1a5>] (device_attach) from [<c00bdc2b>] (bus_probe_device+0x17/0x4c)
    [ 7.141] [<c00bdc2b>] (bus_probe_device) from [<c00bcd69>] (device_add+0x2c5/0x334)
    [ 7.149] [<c00bcd69>] (device_add) from [<c00e80bf>] (sdio_add_func+0x23/0x44)
    [ 7.156] [<c00e80bf>] (sdio_add_func) from [<c00e79eb>] (mmc_attach_sdio+0x187/0x1ec)
    [ 7.164] [<c00e79eb>] (mmc_attach_sdio) from [<c00e31bd>] (mmc_rescan+0x18d/0x1fc)
    [ 7.172] [<c00e31bd>] (mmc_rescan) from [<c001a14f>] (process_one_work+0xd7/0x170)
    [ 7.179] [<c001a14f>] (process_one_work) from [<c001a59b>] (worker_thread+0x103/0x1bc)
    [ 7.187] [<c001a59b>] (worker_thread) from [<c001c731>] (kthread+0x7d/0x90)
    [ 7.194] [<c001c731>] (kthread) from [<c0008ce1>] (ret_from_fork+0x11/0x30)
    [ 7.201] Code: 2103 b580 2200 af00 (681b) 46bd
    [ 7.206] ---[ end trace 3ab50aced42eedb4 ]---

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20210913130203.1903622-33-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: a100: Fix thermal zone node name

[ Upstream commit 5c34c4e46e601554bfa370b23c8ae3c3c734e9f7 ]

The thermal zones one the A100 are called $device-thermal-zone.

However, the thermal zone binding explicitly requires that zones are
called *-thermal. Let's fix it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-50-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: h5: Fix GPU thermal zone node name

[ Upstream commit 94a0f2b0e4e0953d8adf319c44244ef7a57de32c ]

The GPU thermal zone is named gpu_thermal. However, the underscore is
an invalid character for a node name and the thermal zone binding
explicitly requires that zones are called *-thermal. Let's fix it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-48-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: sunxi: Fix OPPs node name

[ Upstream commit ffbe853a3f5a37fa0a511265b21abf097ffdbe45 ]

The operating-points-v2 nodes are named inconsistently, but mostly
either opp_table0 or gpu-opp-table.  However, the underscore is an
invalid character for a node name and the thermal zone binding
explicitly requires that zones are called opp-table-*. Let's fix it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-43-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: Unregister clocks/resets when unbinding

[ Upstream commit 9bec2b9c6134052994115d2d3374e96f2ccb9b9d ]

Currently, unbinding a CCU driver unmaps the device's MMIO region, while
leaving its clocks/resets and their providers registered. This can cause
a page fault later when some clock operation tries to perform MMIO. Fix
this by separating the CCU initialization from the memory allocation,
and then using a devres callback to unregister the clocks and resets.

This also fixes a memory leak of the `struct ccu_reset`, and uses the
correct owner (the specific platform driver) for the clocks and resets.

Early OF clock providers are never unregistered, and limited error
handling is possible, so they are mostly unchanged. The error reporting
is made more consistent by moving the message inside of_sunxi_ccu_probe.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901050526.45673-2-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: zynqmp: Fix serial compatible string

[ Upstream commit 812fa2f0e9d33564bd0131a69750e0d165f4c82a ]

Based on commit 65a2c14d4f00 ("dt-bindings: serial: convert Cadence UART
bindings to YAML") compatible string should look like differently that's
why fix it to be aligned with dt binding.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/89b36e0a6187cc6b05b27a035efdf79173bd4486.1628240307.git.michal.simek@xilinx.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: zynqmp: Do not duplicate flash partition label property

[ Upstream commit 167721a5909f867f8c18c8e78ea58e705ad9bbd4 ]

In kernel 5.4, support has been added for reading MTD devices via the nvmem
API.
For this the mtd devices are registered as read-only NVMEM providers under
sysfs with the same name as the flash partition label property.

So if flash partition label property of multiple flash devices are
identical then the second mtd device fails to get registered as a NVMEM
provider.

This patch fixes the issue by having different label property for different
flashes.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/6c4b9b9232b93d9e316a63c086540fd5bf6b8687.1623684253.git.michal.simek@xilinx.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.15.4

Link: https://lore.kernel.org/r/20211119171444.640508836@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-By: Scott Bruce <smbruce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ACPI: scan: Release PM resources blocked by unused objects"

commit 3b2b49e6dfdcf423506a771bf44cee842596351a upstream.

Revert commit c10383e8ddf4 ("ACPI: scan: Release PM resources blocked
by unused objects"), because it causes boot issues to appear on some
platforms.

Reported-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Reported-by: Saranya Gopal <saranya.gopal@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: Fix NULL pointer dereferences in of_thermal_ functions

commit 96cfe05051fd8543cdedd6807ec59a0e6c409195 upstream.

of_parse_thermal_zones() parses the thermal-zones node and registers a
thermal_zone device for each subnode. However, if a thermal zone is
consuming a thermal sensor and that thermal sensor device hasn't probed
yet, an attempt to set trip_point_*_temp for that thermal zone device
can cause a NULL pointer dereference. Fix it.

 console:/sys/class/thermal/thermal_zone87 # echo 120000 > trip_point_0_temp
 ...
 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
 ...
 Call trace:
  of_thermal_set_trip_temp+0x40/0xc4
  trip_point_temp_store+0xc0/0x1dc
  dev_attr_store+0x38/0x88
  sysfs_kf_write+0x64/0xc0
  kernfs_fop_write_iter+0x108/0x1d0
  vfs_write+0x2f4/0x368
  ksys_write+0x7c/0xec
  __arm64_sys_write+0x20/0x30
  el0_svc_common.llvm.7279915941325364641+0xbc/0x1bc
  do_el0_svc+0x28/0xa0
  el0_svc+0x14/0x24
  el0_sync_handler+0x88/0xec
  el0_sync+0x1c0/0x200

While at it, fix the possible NULL pointer dereference in other
functions as well: of_thermal_get_temp(), of_thermal_set_emul_temp(),
of_thermal_get_trend().

Suggested-by: David Collins <quic_collinsd@quicinc.com>
Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Avoid put_page() when GUP fails

commit 4716023a8f6a0f4a28047f14dd7ebdc319606b84 upstream.

PEBS PERF_SAMPLE_PHYS_ADDR events use perf_virt_to_phys() to convert PMU
sampled virtual addresses to physical using get_user_page_fast_only()
and page_to_phys().

Some get_user_page_fast_only() error cases return false, indicating no
page reference, but still initialize the output page pointer with an
unreferenced page. In these error cases perf_virt_to_phys() calls
put_page(). This causes page reference count underflow, which can lead
to unintentional page sharing.

Fix perf_virt_to_phys() to only put_page() if get_user_page_fast_only()
returns a referenced page.

Fixes: fc7ce9c74c3ad ("perf/core, x86: Add PERF_SAMPLE_PHYS_ADDR")
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211111021814.757086-1-gthelen@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add MSI masking quirk for Nvidia ION AHCI

commit f21082fb20dbfb3e42b769b59ef21c2a7f2c7c1f upstream.

The ION AHCI device pretends that MSI masking isn't a thing, while it
actually implements it and needs MSIs to be unmasked to work. Add a quirk
to that effect.

Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Link: https://lore.kernel.org/r/CALjTZvbzYfBuLB+H=fj2J+9=DxjQ2Uqcy0if_PvmJ-nU-qEgkg@mail.gmail.com
Link: https://lore.kernel.org/r/20211104180130.3825416-3-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/MSI: Deal with devices lying about their MSI mask capability

commit 2226667a145db2e1f314d7f57fd644fe69863ab9 upstream.

It appears that some devices are lying about their mask capability,
pretending that they don't have it, while they actually do.
The net result is that now that we don't enable MSIs on such
endpoint.

Add a new per-device flag to deal with this. Further patches will
make use of it, sadly.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20211104180130.3825416-2-maz@kernel.org
Cc: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc/entry: fix trace test in syscall exit path

commit 3ec18fc7831e7d79e2d536dd1f3bc0d3ba425e8a upstream.

commit 8779e05ba8aa ("parisc: Fix ptrace check on syscall return")
fixed testing of TI_FLAGS. This uncovered a bug in the test mask.
syscall_restore_rfi is only used when the kernel needs to exit to
usespace with single or block stepping and the recovery counter
enabled. The test however used _TIF_SYSCALL_TRACE_MASK, which
includes a lot of bits that shouldn't be tested here.

Fix this by using TIF_SINGLESTEP and TIF_BLOCKSTEP directly.

I encountered this bug by enabling syscall tracepoints. Both in qemu and
on real hardware. As soon as i enabled the tracepoint (sys_exit_read,
but i guess it doesn't really matter which one), i got random page
faults in userspace almost immediately.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: btusb: Add support for TP-Link UB500 Adapter

commit 4fd6d490796171bf786090fee782e252186632e4 upstream.

Add support for TP-Link UB500 Adapter (RTL8761B)

* /sys/kernel/debug/usb/devices
T:  Bus=01 Lev=02 Prnt=05 Port=01 Cnt=01 Dev#= 78 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2357 ProdID=0604 Rev= 2.00
S:  Manufacturer=
S:  Product=TP-Link UB500 Adapter
S:  SerialNumber=E848B8C82000
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Nicholas Flintham <nick@flinny.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Szabolcs Sipos <labuwx@balfug.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Use blk_validate_block_size() to validate block size

commit af3c570fb0df422b4906ebd11c1bf363d89961d5 upstream.

Remove loop_validate_block_size() and use the block layer helper
to validate block size.

Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20211026144015.188-4-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: Add a helper to validate the block size

commit 570b1cac477643cbf01a45fa5d018430a1fddbce upstream.

There are some duplicated codes to validate the block
size in block drivers. This limitation actually comes
from block layer, so this patch tries to add a new block
layer helper for that.

Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20211026144015.188-2-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fortify: Explicitly disable Clang support

commit a52f8a59aef46b59753e583bf4b28fccb069ce64 upstream.

Clang has never correctly compiled the FORTIFY_SOURCE defenses due to
a couple bugs:

Eliding inlines with matching __builtin_* names
https://bugs.llvm.org/show_bug.cgi?id=50322

Incorrect __builtin_constant_p() of some globals
https://bugs.llvm.org/show_bug.cgi?id=41459

In the process of making improvements to the FORTIFY_SOURCE defenses, the
first (silent) bug (coincidentally) becomes worked around, but exposes
the latter which breaks the build. As such, Clang must not be used with
CONFIG_FORTIFY_SOURCE until at least latter bug is fixed (in Clang 13),
and the fortify routines have been rearranged.

Update the Kconfig to reflect the reality of the current situation.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/lkml/CAKwvOd=A+ueGV2ihdy5GtgR2fQbcXjjAtVxv3=cPjffpebZB7A@mail.gmail.com
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: allow preallocation for relocation inodes

commit 960a3166aed015887cd54423a6589ae4d0b65bd5 upstream

Now that we use a dedicated block group and regular writes for data
relocation, we can preallocate the space needed for a relocated inode,
just like we do in regular mode.

Essentially this reverts commit 32430c614844 ("btrfs: zoned: enable
relocation on a zoned filesystem") as it is not needed anymore.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: check for relocation inodes on zoned btrfs in should_nocow

commit 2adada886b26e998b5a624e72f0834ebfdc54cc7 upstream

Prepare for allowing preallocation for relocation inodes.

Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: use regular writes for relocation

commit e6d261e3b1f777b499ce8f535ed44dd1b69278b7 upstream

Now that we have a dedicated block group for relocation, we can use
REQ_OP_WRITE instead of  REQ_OP_ZONE_APPEND for writing out the data on
relocation.

Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: only allow one process to add pages to a relocation inode

commit 35156d852762b58855f513b4f8bb7f32d69dc9c5 upstream

Don't allow more than one process to add pages to a relocation inode on
a zoned filesystem, otherwise we cannot guarantee the sequential write
rule once we're filling preallocated extents on a zoned filesystem.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: add a dedicated data relocation block group

commit c2707a25562343511bf9a3a6a636a16a822204eb upstream

Relocation in a zoned filesystem can fail with a transaction abort with
error -22 (EINVAL). This happens because the relocation code assumes that
the extents we relocated the data to have the same size the source extents
had and ensures this by preallocating the extents.

But in a zoned filesystem we currently can't preallocate the extents as
this would break the sequential write required rule. Therefore it can
happen that the writeback process kicks in while we're still adding pages
to a delalloc range and starts writing out dirty pages.

This then creates destination extents that are smaller than the source
extents, triggering the following safety check in get_new_location():

 1034         if (num_bytes != btrfs_file_extent_disk_num_bytes(leaf, fi)) {
 1035                 ret = -EINVAL;
 1036                 goto out;
 1037         }

Temporarily create a dedicated block group for the relocation process, so
no non-relocation data writes can interfere with the relocation writes.

This is needed that we can switch the relocation process on a zoned
filesystem from the REQ_OP_ZONE_APPEND writing we use for data to a scheme
like in a non-zoned filesystem using REQ_OP_WRITE and preallocation.

Fixes: 32430c614844 ("btrfs: zoned: enable relocation on a zoned filesystem")
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: introduce btrfs_is_data_reloc_root

commit 37f00a6d2e9c97d6e7b5c3d47c49b714c3d0b99f upstream

There are several places in our codebase where we check if a root is the
root of the data reloc tree and subsequent patches will introduce more.

Factor out the check into a small helper function instead of open coding
it multiple times.

Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>