platform/kernel/linux-rpi.git
5 years agoMerge tag 'asoc-fix-v5.3-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git...
Takashi Iwai [Tue, 6 Aug 2019 10:28:08 +0000 (12:28 +0200)]
Merge tag 'asoc-fix-v5.3-rc3' of https://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.3

A relatively large batch of mostly unremarkable fixes here, a couple of
small core fixes for fairly obscure issues, more comment/email updates
with no code impact than usual and a bunch of small driver fixes.

The support for new sample rates in the max98373 driver is a fix for the
fact that the driver declared support for those rates but would in fact
return an error if these rates were selected.

5 years agoASoC: amd: acp3x: use dma address for acp3x dma driver
Vijendar Mukunda [Fri, 2 Aug 2019 13:51:24 +0000 (19:21 +0530)]
ASoC: amd: acp3x: use dma address for acp3x dma driver

We shouldn't assume CPU physical address we get from page_to_phys()
is same as DMA address we get from dma_alloc_coherent(). On x86_64,
we won't run into any problem with the assumption when dma_ops is
nommu_dma_ops. However, DMA address is IOVA when IOMMU is enabled.
And it's most likely different from CPU physical address when AMD
IOMMU is not in passthrough mode.

This patch fixes page faults when IOMMU is enabled.

Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com>
Link: https://lore.kernel.org/r/1564753899-17124-2-git-send-email-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: amd: acp3x: use dma_ops of parent device for acp3x dma driver
Vijendar Mukunda [Fri, 2 Aug 2019 13:51:23 +0000 (19:21 +0530)]
ASoC: amd: acp3x: use dma_ops of parent device for acp3x dma driver

AMD platform device acp3x_rv_i2s created by parent PCI device
driver. Pass struct device of the parent to
snd_pcm_lib_preallocate_pages() so dma_alloc_coherent() can use
correct dma_ops. Otherwise, it will use default dma_ops which
is nommu_dma_ops on x86_64 even when IOMMU is enabled and
set to non passthrough mode.

Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com>
Link: https://lore.kernel.org/r/1564753899-17124-1-git-send-email-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: max98373: add 88200 and 96000 sampling rate support
fengchunguo [Wed, 31 Jul 2019 07:41:56 +0000 (15:41 +0800)]
ASoC: max98373: add 88200 and 96000 sampling rate support

88200 and 96000 sampling rate was not enabled on driver, so can't be played.

The error information:
max98373 3-0031:rate 96000 not supported
max98373 3-0031:ASoC: can't set max98373-aif1 hw params: -22

Signed-off-by: fengchunguo <chunguo.feng@amlogic.com>
Link: https://lore.kernel.org/r/20190731074156.5620-1-chunguo.feng@amlogic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: sun4i-i2s: Incorrect SR and WSS computation
Marcus Cooper [Mon, 29 Jul 2019 15:21:30 +0000 (17:21 +0200)]
ASoC: sun4i-i2s: Incorrect SR and WSS computation

The A64 audio codec uses the original I2S block but the SR and
WSS computation currently assigned is for the newer block.

Fixes: 619c15f7fac9 (ASoC: sun4i-i2s: Change SR and WSS computation)
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Link: https://lore.kernel.org/r/20190729152130.27955-1-codekipper@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoMAINTAINERS: Update Intel ASoC drivers maintainers
Cezary Rojewski [Fri, 26 Jul 2019 18:15:17 +0000 (20:15 +0200)]
MAINTAINERS: Update Intel ASoC drivers maintainers

Adding myself to Intel ASoC drivers maintainers list.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190726181517.27655-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoALSA: usb-audio: Fix gpf in snd_usb_pipe_sanity_check
Hillf Danton [Tue, 30 Jul 2019 09:24:36 +0000 (17:24 +0800)]
ALSA: usb-audio: Fix gpf in snd_usb_pipe_sanity_check

syzbot found the following crash on:

  general protection fault: 0000 [#1] SMP KASAN
  RIP: 0010:snd_usb_pipe_sanity_check+0x80/0x130 sound/usb/helper.c:75
  Call Trace:
    snd_usb_motu_microbookii_communicate.constprop.0+0xa0/0x2fb  sound/usb/quirks.c:1007
    snd_usb_motu_microbookii_boot_quirk sound/usb/quirks.c:1051 [inline]
    snd_usb_apply_boot_quirk.cold+0x163/0x370 sound/usb/quirks.c:1280
    usb_audio_probe+0x2ec/0x2010 sound/usb/card.c:576
    usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
    really_probe+0x281/0x650 drivers/base/dd.c:548
    ....

It was introduced in commit 801ebf1043ae for checking pipe and endpoint
types. It is fixed by adding a check of the ep pointer in question.

BugLink: https://syzkaller.appspot.com/bug?extid=d59c4387bfb6eced94e2
Reported-by: syzbot <syzbot+d59c4387bfb6eced94e2@syzkaller.appspotmail.com>
Fixes: 801ebf1043ae ("ALSA: usb-audio: Sanity checks for each pipe and EP types")
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: pcm: fix lost wakeup event scenarios in snd_pcm_drain
Yuki Tsunashima [Mon, 29 Jul 2019 15:10:36 +0000 (17:10 +0200)]
ALSA: pcm: fix lost wakeup event scenarios in snd_pcm_drain

lost wakeup can occur after enabling irq, therefore put task
into interruptible before enabling interrupts,

without this change, task can be put to sleep and snd_pcm_drain
will delay

Fixes: f2b3614cefb6 ("ALSA: PCM - Don't check DMA time-out too shortly")
Signed-off-by: Yuki Tsunashima <ytsunashima@jp.adit-jv.com>
Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com>
[ported from 4.9]
Signed-off-by: Adam Miartus <amiartus@de.adit-jv.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: hda: Fix 1-minute detection delay when i915 module is not available
Samuel Thibault [Fri, 26 Jul 2019 21:47:02 +0000 (23:47 +0200)]
ALSA: hda: Fix 1-minute detection delay when i915 module is not available

Distribution installation images such as Debian include different sets
of modules which can be downloaded dynamically.  Such images may notably
include the hda sound modules but not the i915 DRM module, even if the
latter was enabled at build time, as reported on
https://bugs.debian.org/931507

In such a case hdac_i915 would be linked in and try to load the i915
module, fail since it is not there, but still wait for a whole minute
before giving up binding with it.

This fixes such as case by only waiting for the binding if the module
was properly loaded (or module support is disabled, in which case i915
is already compiled-in anyway).

Fixes: f9b54e1961c7 ("ALSA: hda/i915: Allow delayed i915 audio component binding")
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoASoC: ti: davinci-mcasp: Correct slot_width posed constraint
Peter Ujfalusi [Fri, 26 Jul 2019 06:42:43 +0000 (09:42 +0300)]
ASoC: ti: davinci-mcasp: Correct slot_width posed constraint

The slot_width is a property for the bus while the constraint for
SNDRV_PCM_HW_PARAM_SAMPLE_BITS is for the in memory format.

Applying slot_width constraint to sample_bits works most of the time, but
it will blacklist valid formats in some cases.

With slot_width 24 we can support S24_3LE and S24_LE formats as they both
look the same on the bus, but a a 24 constraint on sample_bits would not
allow S24_LE as it is stored in 32bits in memory.

Implement a simple hw_rule function to allow all formats which require less
or equal number of bits on the bus as slot_width (if configured).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190726064244.3762-2-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: rockchip: Fix mono capture
Cheng-Yi Chiang [Fri, 26 Jul 2019 04:42:02 +0000 (12:42 +0800)]
ASoC: rockchip: Fix mono capture

This reverts commit db51707b9c9aeedd310ebce60f15d5bb006567e0.
Revert "ASoC: rockchip: i2s: Support mono capture"

Previous discussion in

https://patchwork.kernel.org/patch/10147153/

explains the issue of the patch.
While device is configured as 1-ch, hardware is still
generating a 2-ch stream.
When user space reads the data and assumes it is a 1-ch stream,
the rate will be slower by 2x.

Revert the change so 1-ch is not supported.
User space can selectively take one channel data out of two channel
if 1-ch is preferred.
Currently, both channels record identical data.

Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20190726044202.26866-1-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: Intel: Fix some acpi vs apci typo in somme comments
Christophe JAILLET [Thu, 25 Jul 2019 05:35:23 +0000 (07:35 +0200)]
ASoC: Intel: Fix some acpi vs apci typo in somme comments

Fix some typo to have the filaname given in a comment match the real name
of the file.
Some 'acpi' have erroneously been written 'apci'

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20190725053523.16542-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: ti: davinci-mcasp: Fix clk PDIR handling for i2s master mode
Peter Ujfalusi [Thu, 25 Jul 2019 08:34:23 +0000 (11:34 +0300)]
ASoC: ti: davinci-mcasp: Fix clk PDIR handling for i2s master mode

When running McASP as master capture alone will not record any audio unless
a parallel playback stream is running. As soon as the playback stops the
captured data is going to be silent again.

In McASP master mode we need to set the PDIR for the clock pins and fix
the mcasp_set_axr_pdir() to skip the bits in the PDIR registers above
AMUTE.

This went unnoticed as most of the boards uses McASP as slave and neither
of these issues are visible (audible) in those setups.

Fixes: ca3d9433349e ("ASoC: davinci-mcasp: Update PDIR (pin direction) register handling")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190725083423.7321-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoALSA: hda - Add a conexant codec entry to let mute led work
Hui Wang [Thu, 25 Jul 2019 06:57:37 +0000 (14:57 +0800)]
ALSA: hda - Add a conexant codec entry to let mute led work

This conexant codec isn't in the supported codec list yet, the hda
generic driver can drive this codec well, but on a Lenovo machine
with mute/mic-mute leds, we need to apply CXT_FIXUP_THINKPAD_ACPI
to make the leds work. After adding this codec to the list, the
driver patch_conexant.c will apply THINKPAD_ACPI to this machine.

Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: hda - Fix intermittent CORB/RIRB stall on Intel chips
Takashi Iwai [Fri, 19 Jul 2019 08:27:54 +0000 (10:27 +0200)]
ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chips

It turned out that the recent Intel HD-audio controller chips show a
significant stall during the system PM resume intermittently.  It
doesn't happen so often and usually it may read back successfully
after one or more seconds, but in some rare worst cases the driver
went into fallback mode.

After trial-and-error, we found out that the communication stall seems
covered by issuing the sync after each verb write, as already done for
AMD and other chipsets.  So this patch enables the write-sync flag for
the recent Intel chips, Skylake and onward, as a workaround.

Also, since Broxton and co have the very same driver flags as Skylake,
refer to the Skylake driver flags instead of defining the same
contents again for simplification.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201901
Reported-and-tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoASoC: Fail card instantiation if DAI format setup fails
Ricard Wanderlof [Wed, 24 Jul 2019 09:38:44 +0000 (11:38 +0200)]
ASoC: Fail card instantiation if DAI format setup fails

If the DAI format setup fails, there is no valid communication format
between CPU and CODEC, so fail card instantiation, rather than continue
with a card that will most likely not function properly.

Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.20.1907241132350.6338@lnxricardw1.se.axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoALSA: ac97: Fix double free of ac97_codec_device
Ding Xiang [Tue, 23 Jul 2019 07:44:41 +0000 (15:44 +0800)]
ALSA: ac97: Fix double free of ac97_codec_device

put_device will call ac97_codec_release to free
ac97_codec_device and other resources, so remove the kfree
and other redundant code.

Fixes: 74426fbff66e ("ALSA: ac97: add an ac97 bus")
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoASoC: SOF: Intel: hda: remove misleading error trace from IRQ thread
Kai Vehmanen [Mon, 22 Jul 2019 14:14:01 +0000 (09:14 -0500)]
ASoC: SOF: Intel: hda: remove misleading error trace from IRQ thread

Downgrade "nothing to do in IRQ thread" message from error to a debug
message in the IPC interrupt handler thread.

The spurious wake-up can happen if a HDA stream interrupt is
raised while the IPC interrupt thread is running. IPC functionality
is not impacted by this condition, so debug is a more appropriate
trace level.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: qcom: apq8016_sbc: Fix oops with multiple DAI links
Stephan Gerhold [Mon, 22 Jul 2019 13:03:52 +0000 (15:03 +0200)]
ASoC: qcom: apq8016_sbc: Fix oops with multiple DAI links

apq8016_sbc_parse_of() sets up multiple DAI links, depending on the
number of nodes in the device tree. However, at the moment
CPU and platform components are only allocated for the first link.
This causes an oops when more than one link is defined:

Internal error: Oops: 96000044 [#1] SMP
CPU: 0 PID: 1015 Comm: kworker/0:2 Not tainted 5.3.0-rc1 #4
Call trace:
 apq8016_sbc_platform_probe+0x1a8/0x3f0
 platform_drv_probe+0x50/0xa0
...

Move the allocation inside the loop to ensure that each link is
properly initialized.

Fixes: 98b232ca9e0e ("ASoC: qcom: apq8016_sbc: use modern dai_link style")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20190722130352.95874-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoALSA: compress: Be more restrictive about when a drain is allowed
Charles Keepax [Mon, 22 Jul 2019 09:24:36 +0000 (10:24 +0100)]
ALSA: compress: Be more restrictive about when a drain is allowed

Draining makes little sense in the situation of hardware overrun, as the
hardware will have consumed all its available samples. Additionally,
draining whilst the stream is paused would presumably get stuck as no
data is being consumed on the DSP side.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: compress: Don't allow paritial drain operations on capture streams
Charles Keepax [Mon, 22 Jul 2019 09:24:35 +0000 (10:24 +0100)]
ALSA: compress: Don't allow paritial drain operations on capture streams

Partial drain and next track are intended for gapless playback and
don't really have an obvious interpretation for a capture stream, so
makes sense to not allow those operations on capture streams.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: compress: Prevent bypasses of set_params
Charles Keepax [Mon, 22 Jul 2019 09:24:34 +0000 (10:24 +0100)]
ALSA: compress: Prevent bypasses of set_params

Currently, whilst in SNDRV_PCM_STATE_OPEN it is possible to call
snd_compr_stop, snd_compr_drain and snd_compr_partial_drain, which
allow a transition to SNDRV_PCM_STATE_SETUP. The stream should
only be able to move to the setup state once it has received a
SNDRV_COMPRESS_SET_PARAMS ioctl. Fix this issue by not allowing
those ioctls whilst in the open state.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: compress: Fix regression on compressed capture streams
Charles Keepax [Mon, 22 Jul 2019 09:24:33 +0000 (10:24 +0100)]
ALSA: compress: Fix regression on compressed capture streams

A previous fix to the stop handling on compressed capture streams causes
some knock on issues. The previous fix updated snd_compr_drain_notify to
set the state back to PREPARED for capture streams. This causes some
issues however as the handling for snd_compr_poll differs between the
two states and some user-space applications were relying on the poll
failing after the stream had been stopped.

To correct this regression whilst still fixing the original problem the
patch was addressing, update the capture handling to skip the PREPARED
state rather than skipping the SETUP state as it has done until now.

Fixes: 4f2ab5e1d13d ("ALSA: compress: Fix stop handling on compressed capture streams")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoASoC: dapm: fix a memory leak bug
Wenwen Wang [Mon, 22 Jul 2019 13:57:44 +0000 (08:57 -0500)]
ASoC: dapm: fix a memory leak bug

In snd_soc_dapm_new_control_unlocked(), a kernel buffer is allocated in
dapm_cnew_widget() to hold the new dapm widget. Then, different actions are
taken according to the id of the widget, i.e., 'w->id'. If any failure
occurs during this process, snd_soc_dapm_new_control_unlocked() should be
terminated by going to the 'request_failed' label. However, the allocated
kernel buffer is not freed on this code path, leading to a memory leak bug.

To fix the above issue, free the buffer before returning from
snd_soc_dapm_new_control_unlocked() through the 'request_failed' label.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Link: https://lore.kernel.org/r/1563803864-2809-1-git-send-email-wang6495@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: SOF: use __u32 instead of uint32_t in uapi headers
Masahiro Yamada [Sun, 21 Jul 2019 14:23:08 +0000 (23:23 +0900)]
ASoC: SOF: use __u32 instead of uint32_t in uapi headers

When CONFIG_UAPI_HEADER_TEST=y, exported headers are compile-tested to
make sure they can be included from user-space.

Currently, header.h and fw.h are excluded from the test coverage.
To make them join the compile-test, we need to fix the build errors
attached below.

For a case like this, we decided to use __u{8,16,32,64} variable types
in this discussion:

  https://lkml.org/lkml/2019/6/5/18

Build log:

  CC      usr/include/sound/sof/header.h.s
  CC      usr/include/sound/sof/fw.h.s
In file included from <command-line>:32:0:
./usr/include/sound/sof/header.h:19:2: error: unknown type name ‘uint32_t’
  uint32_t magic;  /**< 'S', 'O', 'F', '\0' */
  ^~~~~~~~
./usr/include/sound/sof/header.h:20:2: error: unknown type name ‘uint32_t’
  uint32_t type;  /**< component specific type */
  ^~~~~~~~
./usr/include/sound/sof/header.h:21:2: error: unknown type name ‘uint32_t’
  uint32_t size;  /**< size in bytes of data excl. this struct */
  ^~~~~~~~
./usr/include/sound/sof/header.h:22:2: error: unknown type name ‘uint32_t’
  uint32_t abi;  /**< SOF ABI version */
  ^~~~~~~~
./usr/include/sound/sof/header.h:23:2: error: unknown type name ‘uint32_t’
  uint32_t reserved[4]; /**< reserved for future use */
  ^~~~~~~~
./usr/include/sound/sof/header.h:24:2: error: unknown type name ‘uint32_t’
  uint32_t data[0]; /**< Component data - opaque to core */
  ^~~~~~~~
In file included from <command-line>:32:0:
./usr/include/sound/sof/fw.h:49:2: error: unknown type name ‘uint32_t’
  uint32_t size;  /* bytes minus this header */
  ^~~~~~~~
./usr/include/sound/sof/fw.h:50:2: error: unknown type name ‘uint32_t’
  uint32_t offset; /* offset from base */
  ^~~~~~~~
./usr/include/sound/sof/fw.h:64:2: error: unknown type name ‘uint32_t’
  uint32_t size;  /* bytes minus this header */
  ^~~~~~~~
./usr/include/sound/sof/fw.h:65:2: error: unknown type name ‘uint32_t’
  uint32_t num_blocks; /* number of blocks */
  ^~~~~~~~
./usr/include/sound/sof/fw.h:73:2: error: unknown type name ‘uint32_t’
  uint32_t file_size; /* size of file minus this header */
  ^~~~~~~~
./usr/include/sound/sof/fw.h:74:2: error: unknown type name ‘uint32_t’
  uint32_t num_modules; /* number of modules */
  ^~~~~~~~
./usr/include/sound/sof/fw.h:75:2: error: unknown type name ‘uint32_t’
  uint32_t abi;  /* version of header format */
  ^~~~~~~~

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20190721142308.30306-1-yamada.masahiro@socionext.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoSoC: rockchip: rockchip_max98090: Enable MICBIAS for headset keypress detection
Enric Balletbo i Serra [Fri, 19 Jul 2019 17:39:29 +0000 (19:39 +0200)]
SoC: rockchip: rockchip_max98090: Enable MICBIAS for headset keypress detection

The TS3A227E says that the headset keypress detection needs the MICBIAS
power in order to report the key events to ensure proper operation
The headset keypress detection needs the MICBIAS power in order to report
the key events all the time as long as MIC is present. So MICBIAS pin
is forced on when a MICROPHONE is detected.

On Veyron Minnie I observed that if the MICBIAS power is not present and
the key press detection is activated (just because it is enabled when you
insert a headset), it randomly reports a keypress on insert.
E.g. (KEY_PLAYPAUSE)

 Event: (SW_HEADPHONE_INSERT), value 1
 Event: (SW_MICROPHONE_INSERT), value 1
 Event: -------------- SYN_REPORT ------------
 Event: (KEY_PLAYPAUSE), value 1

Userspace thinks that KEY_PLAYPAUSE is pressed and produces the annoying
effect that the media player starts a play/pause loop.

Note that, although most of the time the key reported is the one
associated with BTN_0, not always this is true. On my tests I also saw
different keys reported

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20190719173929.24065-1-enric.balletbo@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: cs42xx8: Fix MFREQ selection issue for async mode
Shengjiu Wang [Tue, 16 Jul 2019 09:45:47 +0000 (17:45 +0800)]
ASoC: cs42xx8: Fix MFREQ selection issue for async mode

When sample rate of TX is different with sample rate of RX in
async mode, the MFreq selection will be wrong.

For example, sysclk = 24.576MHz, TX rate = 96000Hz, RX rate = 48000Hz.
Then ratio of TX = 256, ratio of RX = 512, For MFreq is shared by TX
and RX instance, the correct value of MFreq is 2 for both TX and RX.

But original method will cause MFreq = 0 for TX, MFreq = 2 for RX.
If TX is started after RX, RX will be impacted, RX work abnormal with
MFreq = 0.

This patch is to select proper MFreq value according to TX rate and
RX rate.

Fixes: 0c516b4ff85c ("ASoC: cs42xx8: Add codec driver support for CS42448/CS42888")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/20190716094547.46787-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: dapm: Fix handling of custom_stop_condition on DAPM graph walks
Charles Keepax [Thu, 18 Jul 2019 08:43:33 +0000 (09:43 +0100)]
ASoC: dapm: Fix handling of custom_stop_condition on DAPM graph walks

DPCM uses snd_soc_dapm_dai_get_connected_widgets to build a
list of the widgets connected to a specific front end DAI so it
can search through this list for available back end DAIs. The
custom_stop_condition was added to is_connected_ep to facilitate this
list not containing more widgets than is necessary. Doing so both
speeds up the DPCM handling as less widgets need to be searched and
avoids issues with CODEC to CODEC links as these would be confused
with back end DAIs if they appeared in the list of available widgets.

custom_stop_condition was implemented by aborting the graph walk
when the condition is triggered, however there is an issue with this
approach. Whilst walking the graph is_connected_ep should update the
endpoints cache on each widget, if the walk is aborted the number
of attached end points is unknown for that sub-graph. When the stop
condition triggered, the original patch ignored the triggering widget
and returned zero connected end points; a later patch updated this
to set the triggering widget's cache to 1 and return that. Both of
these approaches result in inaccurate values being stored in various
end point caches as the values propagate back through the graph,
which can result in later issues with widgets powering/not powering
unexpectedly.

As the original goal was to reduce the size of the widget list passed
to the DPCM code, the simplest solution is to limit the functionality
of the custom_stop_condition to the widget list. This means the rest
of the graph will still be processed resulting in correct end point
caches, but only widgets up to the stop condition will be added to the
returned widget list.

Fixes: 6742064aef7f ("ASoC: dapm: support user-defined stop condition in dai_get_connected_widgets")
Fixes: 5fdd022c2026 ("ASoC: dpcm: play nice with CODEC<->CODEC links")
Fixes: 09464974eaa8 ("ASoC: dapm: Fix to return correct path list in is_connected_ep.")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190718084333.15598-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoALSA: line6: Fix a typo
Christophe JAILLET [Sun, 21 Jul 2019 10:25:58 +0000 (12:25 +0200)]
ALSA: line6: Fix a typo

s/Vairax/Variax/

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: pcm: Fix refcount_inc() on zero usage
Takashi Iwai [Fri, 19 Jul 2019 08:55:05 +0000 (10:55 +0200)]
ALSA: pcm: Fix refcount_inc() on zero usage

The recent rewrite of PCM link lock management introduced the refcount
in snd_pcm_group object, managed by the kernel refcount_t API.  This
caused unexpected kernel warnings when the kernel is built with
CONFIG_REFCOUNT_FULL=y.  As the warning line indicates, the problem is
obviously that we start with refcount=0 and do refcount_inc() for
adding each PCM link, while refcount_t API doesn't like refcount_inc()
performed on zero.

For adapting the proper refcount_t usage, this patch changes the logic
slightly:
- The initial refcount is 1, assuming the single list entry
- The refcount is incremented / decremented at each PCM link addition
  and deletion
- ... which allows us concentrating only on the refcount as a release
  condition

Fixes: f57f3df03a8e ("ALSA: pcm: More fine-grained PCM link locking")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204221
Reported-and-tested-by: Duncan Overbruck <kernel@duncano.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: line6: Fix wrong altsetting for LINE6_PODHD500_1
Kai-Heng Feng [Thu, 18 Jul 2019 09:53:13 +0000 (17:53 +0800)]
ALSA: line6: Fix wrong altsetting for LINE6_PODHD500_1

Commit 7b9584fa1c0b ("staging: line6: Move altsetting to properties")
set a wrong altsetting for LINE6_PODHD500_1 during refactoring.

Set the correct altsetting number to fix the issue.

BugLink: https://bugs.launchpad.net/bugs/1790595
Fixes: 7b9584fa1c0b ("staging: line6: Move altsetting to properties")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: hda - Optimize resume for codecs without jack detection
Takashi Iwai [Tue, 16 Jul 2019 09:52:00 +0000 (11:52 +0200)]
ALSA: hda - Optimize resume for codecs without jack detection

The codecs without jack detection also don't have to be resumed
forcibly because, obviously, they have no jack.  Skip the forced
resume in such a case as optimization as well.

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: hda - Don't resume forcibly i915 HDMI/DP codec
Takashi Iwai [Tue, 16 Jul 2019 06:56:51 +0000 (08:56 +0200)]
ALSA: hda - Don't resume forcibly i915 HDMI/DP codec

We apply the codec resume forcibly at system resume callback for
updating and syncing the jack detection state that may have changed
during sleeping.  This is, however, superfluous for the codec like
Intel HDMI/DP, where the jack detection is managed via the audio
component notification; i.e. the jack state change shall be reported
sooner or later from the graphics side at mode change.

This patch changes the codec resume callback to avoid the forcible
resume conditionally with a new flag, codec->relaxed_resume, for
reducing the resume time.  The flag is set in the codec probe.

Although this doesn't fix the entire bug mentioned in the bugzilla
entry below, it's still a good optimization and some improvements are
seen.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201901
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoASoC: Intel: bytcht_es8316: Add quirk for Irbis NB41 netbook
Hans de Goede [Fri, 12 Jul 2019 11:27:08 +0000 (13:27 +0200)]
ASoC: Intel: bytcht_es8316: Add quirk for Irbis NB41 netbook

The Irbis NB41 netbook has its internal mic on IN2, inverted jack-detect
and stereo speakers, add a quirk for this.

Cc: russianneuromancer@ya.ru
Reported-and-tested-by: russianneuromancer@ya.ru
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20190712112708.25327-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: samsung: odroid: fix a double-free issue for cpu_dai
Wen Yang [Sat, 13 Jul 2019 03:46:15 +0000 (11:46 +0800)]
ASoC: samsung: odroid: fix a double-free issue for cpu_dai

The cpu_dai variable is still being used after the of_node_put() call,
which may result in double-free:

        of_node_put(cpu_dai);            ---> released here

        ret = devm_snd_soc_register_card(dev, card);
        if (ret < 0) {
...
                goto err_put_clk_i2s;    --> jump to err_put_clk_i2s
...

err_put_clk_i2s:
        clk_put(priv->clk_i2s_bus);
err_put_sclk:
        clk_put(priv->sclk_i2s);
err_put_cpu_dai:
        of_node_put(cpu_dai);            --> double-free here

Fixes: d832d2b246c5 ("ASoC: samsung: odroid: Fix of_node refcount unbalance")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/1562989575-33785-3-git-send-email-wen.yang99@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: samsung: odroid: fix an use-after-free issue for codec
Wen Yang [Sat, 13 Jul 2019 03:46:14 +0000 (11:46 +0800)]
ASoC: samsung: odroid: fix an use-after-free issue for codec

The codec variable is still being used after the of_node_put() call,
which may result in use-after-free.

Fixes: bc3cf17b575a ("ASoC: samsung: odroid: Add support for secondary CPU DAI")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/1562989575-33785-2-git-send-email-wen.yang99@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoALSA: hda/hdmi - Fix i915 reverse port/pin mapping
Takashi Iwai [Mon, 15 Jul 2019 21:14:53 +0000 (23:14 +0200)]
ALSA: hda/hdmi - Fix i915 reverse port/pin mapping

The recent fix for Icelake HDMI codec introduced the mapping from pin
NID to the i915 gfx port number.  However, it forgot the reverse
mapping from the port number to the pin NID that is used in the ELD
notifier callback.  As a result, it's processed to a wrong widget and
gives a warning like
  snd_hda_codec_hdmi hdaudioC0D2: HDMI: pin nid 5 not registered

This patch corrects it with a proper reverse mapping function.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204133
Fixes: b0d8bc50b9f2 ("ALSA: hda: hdmi - add Icelake support")
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: hda/hdmi - Remove duplicated define
Takashi Iwai [Mon, 15 Jul 2019 21:12:13 +0000 (23:12 +0200)]
ALSA: hda/hdmi - Remove duplicated define

INTEL_GET_VENDOR_VERB is defined twice identically.
Let's remove a superfluous line.

Fixes: b0d8bc50b9f2 ("ALSA: hda: hdmi - add Icelake support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: seq: Break too long mutex context in the write loop
Takashi Iwai [Mon, 15 Jul 2019 20:50:27 +0000 (22:50 +0200)]
ALSA: seq: Break too long mutex context in the write loop

The fix for the racy writes and ioctls to sequencer widened the
application of client->ioctl_mutex to the whole write loop.  Although
it does unlock/relock for the lengthy operation like the event dup,
the loop keeps the ioctl_mutex for the whole time in other
situations.  This may take quite long time if the user-space would
give a huge buffer, and this is a likely cause of some weird behavior
spotted by syzcaller fuzzer.

This patch puts a simple workaround, just adding a mutex break in the
loop when a large number of events have been processed.  This
shouldn't hit any performance drop because the threshold is set high
enough for usual operations.

Fixes: 7bd800915677 ("ALSA: seq: More protection for concurrent write and ioctl races")
Reported-by: syzbot+97aae04ce27e39cbfca9@syzkaller.appspotmail.com
Reported-by: syzbot+4c595632b98bb8ffcc66@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: hda/realtek: apply ALC891 headset fixup to one Dell machine
Hui Wang [Tue, 16 Jul 2019 07:21:34 +0000 (15:21 +0800)]
ALSA: hda/realtek: apply ALC891 headset fixup to one Dell machine

Without this patch, the headset-mic and headphone-mic don't work.

Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: rme9652: Unneeded variable: "result".
Hariprasad Kelam [Thu, 11 Jul 2019 17:21:07 +0000 (22:51 +0530)]
ALSA: rme9652: Unneeded variable: "result".

This patch fixes below issue reported by coccicheck

sound/pci/rme9652/rme9652.c:2161:5-11: Unneeded variable: "result".
Return "0" on line 2167

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: emu10k1: Remove unneeded variable "change"
Hariprasad Kelam [Thu, 11 Jul 2019 17:17:26 +0000 (22:47 +0530)]
ALSA: emu10k1: Remove unneeded variable "change"

fix below issue reported by coccicheck
sound/pci/emu10k1/emu10k1x.c:1077:5-11: Unneeded variable: "change".
Return "0" on line 1092

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: au88x0: Remove unneeded variable: "changed"
Hariprasad Kelam [Thu, 11 Jul 2019 17:13:02 +0000 (22:43 +0530)]
ALSA: au88x0: Remove unneeded variable: "changed"

Fix below issues reported by coccicheck

sound/pci/au88x0/au88x0_a3d.c:821:8-15: Unneeded variable: "changed".
Return "1" on line 834
sound/pci/au88x0/au88x0_a3d.c:768:5-12: Unneeded variable: "changed".
Return "1" on line 777
sound/pci/au88x0/au88x0_a3d.c:804:5-12: Unneeded variable: "changed".
Return "1" on line 813
sound/pci/au88x0/au88x0_a3d.c:786:8-15: Unneeded variable: "changed".
Return "1" on line 796

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: hda/realtek - Fixed Headphone Mic can't record on Dell platform
Kailang Yang [Mon, 15 Jul 2019 02:41:50 +0000 (10:41 +0800)]
ALSA: hda/realtek - Fixed Headphone Mic can't record on Dell platform

It assigned to wrong model. So, The headphone Mic can't work.

Fixes: 3f640970a414 ("ALSA: hda - Fix headset mic detection problem for several Dell laptops")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoASoC: audio-graph-card: add missing const at graph_get_dai_id()
Kuninori Morimoto [Thu, 11 Jul 2019 04:10:45 +0000 (13:10 +0900)]
ASoC: audio-graph-card: add missing const at graph_get_dai_id()

commit c152f8491a8d9 ("ASoC: audio-graph-card: fix an use-after-free in
graph_get_dai_id()") fixups use-after-free issue,
but, it need to use "const" for reg. This patch adds it.

We will have below without this patch

LINUX/sound/soc/generic/audio-graph-card.c: In function 'graph_get_dai_id':
LINUX/sound/soc/generic/audio-graph-card.c:87:7: warning: assignment discards\
 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
   reg = of_get_property(node, "reg", NULL);

Fixes: c152f8491a8d9 ("ASoC: audio-graph-card: fix an use-after-free in graph_get_dai_id()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Wen Yang <wen.yang99@zte.com.cn>
Link: https://lore.kernel.org/r/87sgrd43ja.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: rt1011: fix DC calibration offset not applying
Shuming Fan [Thu, 11 Jul 2019 08:22:14 +0000 (16:22 +0800)]
ASoC: rt1011: fix DC calibration offset not applying

There are two issues to fix:
- DC offset calibration data will be reset after stopping playback.
- DC offset calibration data should be applied in the initial setting.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20190711082214.8142-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: audio-graph-card: fix an use-after-free in graph_get_dai_id()
Wen Yang [Wed, 10 Jul 2019 07:25:09 +0000 (15:25 +0800)]
ASoC: audio-graph-card: fix an use-after-free in graph_get_dai_id()

After calling of_node_put() on the node variable, it is still being
used, which may result in use-after-free.
Fix this issue by calling of_node_put() after the last usage.

Fixes: a0c426fe1433 ("ASoC: simple-card-utils: check "reg" property on asoc_simple_card_get_dai_id()")
Link: https://lore.kernel.org/r/1562743509-30496-5-git-send-email-wen.yang99@zte.com.cn
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: audio-graph-card: fix use-after-free in graph_dai_link_of_dpcm()
Wen Yang [Wed, 10 Jul 2019 07:25:08 +0000 (15:25 +0800)]
ASoC: audio-graph-card: fix use-after-free in graph_dai_link_of_dpcm()

After calling of_node_put() on the ports, port, and node variables,
they are still being used, which may result in use-after-free.
Fix this issue by calling of_node_put() after the last usage.

Fixes: dd98fbc558a0 ("ASoC: audio-graph-card: cleanup DAI link loop method - step1")
Link: https://lore.kernel.org/r/1562743509-30496-4-git-send-email-wen.yang99@zte.com.cn
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: simple-card: fix an use-after-free in simple_for_each_link()
Wen Yang [Wed, 10 Jul 2019 07:25:07 +0000 (15:25 +0800)]
ASoC: simple-card: fix an use-after-free in simple_for_each_link()

The codec variable is still being used after the of_node_put() call,
which may result in use-after-free.

Fixes: d947cdfd4be2 ("ASoC: simple-card: cleanup DAI link loop method - step1")
Link: https://lore.kernel.org/r/1562743509-30496-3-git-send-email-wen.yang99@zte.com.cn
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: simple-card: fix an use-after-free in simple_dai_link_of_dpcm()
Wen Yang [Wed, 10 Jul 2019 07:25:06 +0000 (15:25 +0800)]
ASoC: simple-card: fix an use-after-free in simple_dai_link_of_dpcm()

The node variable is still being used after the of_node_put() call,
which may result in use-after-free.

Fixes: cfc652a73331 ("ASoC: simple-card: tidyup prefix for snd_soc_codec_conf")
Link: https://lore.kernel.org/r/1562743509-30496-2-git-send-email-wen.yang99@zte.com.cn
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: simple-card-utils: care no Platform for DPCM
Kuninori Morimoto [Wed, 10 Jul 2019 08:01:12 +0000 (17:01 +0900)]
ASoC: simple-card-utils: care no Platform for DPCM

commit 34614739988ad ("ASoC: soc-core: support dai_link with
platforms_num != 1") supports multi Platform, and
commit 9f3eb91753451 ("ASoC: simple-card-utils: consider CPU-Platform
possibility") removed no Platform from simple-card.

Multi Platform is now checking both Platform name/of_node are NULL case.
But in normal case, DPCM be doesn't have Platform.

asoc_simple_canonicalize_platform() try to use CPU of_node
to Platform (This is needed for DMAEngine platform case),
but it still might be NULL at DPCM be.

This patch try to use no Platform after that if Platform of_node
is still NULL. It can't probe without this patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87muhmgw2o.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: simple_card_utils.h: care NULL dai at asoc_simple_debug_dai()
Kuninori Morimoto [Wed, 10 Jul 2019 07:59:55 +0000 (16:59 +0900)]
ASoC: simple_card_utils.h: care NULL dai at asoc_simple_debug_dai()

props->xxx_dai might be NULL when DPCM.
This patch cares it for debug.

Fixes: commit 0580dde59438 ("ASoC: simple-card-utils: add asoc_simple_debug_info()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o922gw4u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: Relocate my e-mail to .com domain zone
Kirill Marinushkin [Wed, 10 Jul 2019 05:51:35 +0000 (07:51 +0200)]
ASoC: Relocate my e-mail to .com domain zone

Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.com>
Link: https://lore.kernel.org/r/20190710055135.21377-1-kmarinushkin@birdec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: rt1308: Remove executable attribute from source files
Joe Perches [Tue, 9 Jul 2019 17:22:16 +0000 (10:22 -0700)]
ASoC: rt1308: Remove executable attribute from source files

These are source files not executable.

Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/d198a3e6ed3a0e9070afeb6aca69903c3e985149.camel@perches.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: max98357a: use mdelay for sdmode-delay
Tzung-Bi Shih [Mon, 8 Jul 2019 14:19:01 +0000 (22:19 +0800)]
ASoC: max98357a: use mdelay for sdmode-delay

max98357a_daiops_trigger() is possible to be called in atomic context if
the .nonatomic flag is equal to 0 in the DAI links.

When cancel_delayed_work_sync() in max98357a_daiops_trigger() is called
in atomic context, kernel emits the following message: "BUG: sleeping
function called from invalid context".

According to the DT binding document, value less than or equal to 5ms of
sdmod-delay should be sufficient to avoid the pop noise.  Use mdelay
(i.e. busy loop) for such low delay should be acceptable.

Fixes: cec5b01f8f1c ("ASoC: max98357a: avoid speaker pop when playback
startup")

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20190708141901.68797-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoALSA: ps3: Remove Unneeded variable: "ret"
Hariprasad Kelam [Wed, 10 Jul 2019 02:39:46 +0000 (08:09 +0530)]
ALSA: ps3: Remove Unneeded variable: "ret"

This patch fixes below issue reported by coccicheck
sound/ppc/snd_ps3.c:631:5-8: Unneeded variable: "ret". Return "0" on
line 668

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: lx6464es: Remove unneeded variable err
Hariprasad Kelam [Wed, 10 Jul 2019 02:30:59 +0000 (08:00 +0530)]
ALSA: lx6464es: Remove unneeded variable err

This patch fixes below issue reported by coccicheck
sound/pci/lx6464es/lx6464es.c:256:5-8: Unneeded variable: "err". Return
"0" on line 258

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: firewire-lib: code refactoring for local variables
Takashi Sakamoto [Sun, 7 Jul 2019 12:07:59 +0000 (21:07 +0900)]
ALSA: firewire-lib: code refactoring for local variables

It's better to use int type for loop index. For consistency, the name
of local variable for the number of data block should be plural.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: firewire-lib: code refactoring for post operation to data block counter
Takashi Sakamoto [Sun, 7 Jul 2019 12:07:58 +0000 (21:07 +0900)]
ALSA: firewire-lib: code refactoring for post operation to data block counter

As a result of former commits, post operation to data block count for
cases without CIP_DBC_IS_END_EVENT can be done just with
data_block_counter member of amdtp_stream structure.

This commit adds code refactoring to obsolete local variable for
data block counter.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: firewire-lib: code refactoring for error path of parser for CIP header
Takashi Sakamoto [Sun, 7 Jul 2019 12:07:57 +0000 (21:07 +0900)]
ALSA: firewire-lib: code refactoring for error path of parser for CIP header

When a parser for CIP header returns -EAGAIN, no extra care is needed
to probe tracepoints event.

This commit adds code refactoring for the error path.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: firewire-lib: fix different data block counter between probed event and transfe...
Takashi Sakamoto [Sun, 7 Jul 2019 12:07:56 +0000 (21:07 +0900)]
ALSA: firewire-lib: fix different data block counter between probed event and transferred isochronous packet

For IT context, tracepoints event is probed after calculating next data
block counter. This brings difference of data block counter between
the probed event and actual isochronous packet.

This commit fixes it.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: firewire-lib: fix initial value of data block count for IR context without...
Takashi Sakamoto [Sun, 7 Jul 2019 12:07:55 +0000 (21:07 +0900)]
ALSA: firewire-lib: fix initial value of data block count for IR context without CIP_DBC_IS_END_EVENT

For IR context, ALSA IEC 61883-1/6 engine uses initial value of data
block counter as UINT_MAX, to detect first isochronous packet in the
middle of packet streaming.

At present, when CIP_DBC_IS_END_EVENT is not used (i.e. for drivers except
for ALSA fireworks driver), the initial value is used as is for
tracepoints event. However, the engine can detect the value of dbc field
in the payload of first isochronous packet and the value should be assigned
to the event.

This commit fixes the bug.

Fixes: 76864868dbab ("ALSA: firewire-lib: cache next data_block_counter after probing tracepoints event for IR context")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: firewire-lib/fireface: fix initial value of data block counter for IR context...
Takashi Sakamoto [Sun, 7 Jul 2019 12:07:54 +0000 (21:07 +0900)]
ALSA: firewire-lib/fireface: fix initial value of data block counter for IR context with CIP_NO_HEADER

For IR context, ALSA IEC 61883-1/6 engine uses initial value of data
block counter as UINT_MAX, to detect first isochronous packet in the
middle of packet streaming.

At present, when CIP_NO_HEADER is used (i.e. for ALSA fireface driver),
the initial value is used for tracepoints event. 0x00 should be
for the event when the initial value is UINT_MAX because isochronous
packets with CIP_NO_HEADER option has no field for data block count.

This commit fixes the bug.

Fixes: 76864868dbab ("ALSA: firewire-lib: cache next data_block_counter after probing tracepoints event for IR context")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: firewire-lib: fix invalid length of rx packet payload for tracepoint events
Takashi Sakamoto [Sun, 7 Jul 2019 12:07:53 +0000 (21:07 +0900)]
ALSA: firewire-lib: fix invalid length of rx packet payload for tracepoint events

Although CIP header is handled as context header, the length of isochronous
packet includes two quadlets for its payload. In tracepoints event the
value of payload_quadlets should includes the two quadlets. But at present
it doesn't.

This commit fixes the bug.

Fixes: b18f0cfaf16b ("ALSA: firewire-lib: use 8 byte packet header for IT context to separate CIP header from CIP payload")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoMerge tag 'asoc-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie...
Takashi Iwai [Mon, 8 Jul 2019 12:45:20 +0000 (14:45 +0200)]
Merge tag 'asoc-v5.3' of https://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.3

This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.

 - Lots more work on moving towards a component based framework from
   Morimoto-san.
 - Support for force disconnecting muxes from Jerome Brunet.
 - New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
   CX2072X, Realtek RT1011 and RT1308.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoMerge branch 'topic/hda-refresh-cleanup' into for-next
Takashi Iwai [Sun, 7 Jul 2019 09:29:03 +0000 (11:29 +0200)]
Merge branch 'topic/hda-refresh-cleanup' into for-next

Merge a cleanup for HD-audio widget refresh code

Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: usb-audio: fix Line6 Helix audio format rates
Nicola Lunghi [Sun, 7 Jul 2019 08:27:34 +0000 (09:27 +0100)]
ALSA: usb-audio: fix Line6 Helix audio format rates

Line6 Helix and HX stomp devices don't support retrieving
the number of clock sample rate.

Add a quirk to set it to 48Khz by default.

[ fixed wrong variable initialization changes by tiwai ]

Signed-off-by: Nicola Lunghi <nick83ola@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agofirewire-motu: fix wrong reference count for stream functionality at error path of...
Takashi Sakamoto [Sun, 7 Jul 2019 05:20:11 +0000 (14:20 +0900)]
firewire-motu: fix wrong reference count for stream functionality at error path of rawmidi interface

In IEC 61883-6, several types of sampling data can be multiplexed into
payload of common isochronous packet (CIP). For typical audio and music
units, PCM samples and MIDI messages are multiplexed into one packet
streaming.

ALSA firewire-motu driver allows applications of rawmidi interface to
start packet streaming for transmission of MIDI messages. However at
error path, the reference count of stream functionality is not operated
correctly. This can brings a bug that packet streaming is not stopped
when all referrers release the count.

This commit fixes the bug.

Fixes: 8edc56ec8f14 ("ALSA: firewire-motu: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: firewire-digi00x: fix wrong reference count for stream functionality at error...
Takashi Sakamoto [Sun, 7 Jul 2019 05:20:10 +0000 (14:20 +0900)]
ALSA: firewire-digi00x: fix wrong reference count for stream functionality at error path of rawmidi interface

In IEC 61883-6, several types of sampling data can be multiplexed into
payload of common isochronous packet (CIP). For typical audio and music
units, PCM samples and MIDI messages are multiplexed into one packet
streaming.

ALSA firewire-digi00x driver allows applications of rawmidi interface to
start packet streaming for transmission of MIDI messages. However at
error path, the reference count of stream functionality is not operated
correctly. This can brings a bug that packet streaming is not stopped
when all referrers release the count.

This commit fixes the bug.

Fixes: ae8ffbb26512 ("ALSA: firewire-digi00x: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: dice: fix wrong reference count for stream functionality at error path of rawmi...
Takashi Sakamoto [Sun, 7 Jul 2019 05:20:09 +0000 (14:20 +0900)]
ALSA: dice: fix wrong reference count for stream functionality at error path of rawmidi interface

In IEC 61883-6, several types of sampling data can be multiplexed into
payload of common isochronous packet (CIP). For typical audio and music
units, PCM samples and MIDI messages are multiplexed into one packet
streaming.

ALSA dice driver allows applications of rawmidi interface to start
packet streaming for transmission of MIDI messages. However at error
path, the reference count of stream functionality is not operated
correctly. This can brings a bug that packet streaming is not stopped
when all referrers release the count.

This commit fixes the bug.

Fixes: 3cd2c2d780a2 ("ALSA: dice: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: oxfw: fix wrong reference count for stream functionality at error path of rawmi...
Takashi Sakamoto [Sun, 7 Jul 2019 05:20:08 +0000 (14:20 +0900)]
ALSA: oxfw: fix wrong reference count for stream functionality at error path of rawmidi interface

In IEC 61883-6, several types of sampling data can be multiplexed into
payload of common isochronous packet (CIP). For typical audio and music
units, PCM samples and MIDI messages are multiplexed into one packet
streaming.

ALSA oxfw driver allows applications of rawmidi interface to start
packet streaming for transmission of MIDI messages. However at error
path, the reference count of stream functionality is not operated
correctly. This can brings a bug that packet streaming is not stopped
when all referrers release the count.

This commit fixes the bug.

Fixes: 4f380d007052 ("ALSA: oxfw: configure packet format in pcm.hw_params callback")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: fireworks: fix wrong reference count for stream functionality at error path...
Takashi Sakamoto [Sun, 7 Jul 2019 05:20:07 +0000 (14:20 +0900)]
ALSA: fireworks: fix wrong reference count for stream functionality at error path of rawmidi interface

In IEC 61883-6, several types of sampling data can be multiplexed into
payload of common isochronous packet (CIP). For typical audio and music
units, PCM samples and MIDI messages are multiplexed into one packet
streaming.

ALSA fireworks driver allows applications of rawmidi interface to start
packet streaming for transmission of MIDI messages. However at error
path, the reference count of stream functionality is not operated
correctly. This can brings a bug that packet streaming is not stopped
when all referrers release the count.

This commit fixes the bug.

Fixes: 3d7250667ea9 ("ALSA: fireworks: configure sampling transfer frequency in pcm.hw_params callback")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: bebob: fix wrong reference count for stream functionality at error path of...
Takashi Sakamoto [Sun, 7 Jul 2019 05:20:06 +0000 (14:20 +0900)]
ALSA: bebob: fix wrong reference count for stream functionality at error path of rawmidi interface

In IEC 61883-6, several types of sampling data can be multiplexed into
payload of common isochronous packet (CIP). For typical audio and music
units, PCM samples and MIDI messages are multiplexed into one packet
streaming.

ALSA bebob driver allows applications of rawmidi interface to start
packet streaming for transmission of MIDI messages. However at error
path, the reference count of stream functionality is not operated
correctly. This can brings a bug that packet streaming is not stopped
when all referrers release the count.

This commit fixes the bug.

Fixes: ac2888b958f2 ("ALSA: bebob: configure sampling transfer frequency in pcm.hw_params callback")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoMerge remote-tracking branch 'asoc/topic/meson' into asoc-next
Mark Brown [Sat, 6 Jul 2019 11:25:28 +0000 (12:25 +0100)]
Merge remote-tracking branch 'asoc/topic/meson' into asoc-next

5 years agoMerge branch 'asoc-5.3' into asoc-next
Mark Brown [Sat, 6 Jul 2019 11:25:26 +0000 (12:25 +0100)]
Merge branch 'asoc-5.3' into asoc-next

5 years agoMerge branch 'asoc-5.2' into asoc-linus
Mark Brown [Sat, 6 Jul 2019 11:25:24 +0000 (12:25 +0100)]
Merge branch 'asoc-5.2' into asoc-linus

5 years agoASoC: SOF: Intel: implement runtime idle for CNL/APL
Kai Vehmanen [Tue, 2 Jul 2019 13:24:28 +0000 (16:24 +0300)]
ASoC: SOF: Intel: implement runtime idle for CNL/APL

Implement runtime idle for CNL/APL devices using similar runtime
PM idle logic as the Intel AZX HDA driver. If any HDA codecs are
powered when runtime suspend request comes, return -EBUSY. By doing
this, strict ordering is enforced between HDA codec and the HDA
controller.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20190702132428.13129-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: SOF: add runtime idle callback
Kai Vehmanen [Tue, 2 Jul 2019 13:24:27 +0000 (16:24 +0300)]
ASoC: SOF: add runtime idle callback

Add ability to implement a SOF device level runtime idle callback.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20190702132428.13129-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: hdac_hdmi: report codec link up/down status to bus
Kai Vehmanen [Tue, 2 Jul 2019 13:24:26 +0000 (16:24 +0300)]
ASoC: hdac_hdmi: report codec link up/down status to bus

Report codec power status to the HDA codec bus from runtime pm
suspend and resume callbacks. This is required to implement
runtime idle logic that relies on 'codec_powered' field of hdac_bus
to be maintained for all codecs.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20190702132428.13129-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: SOF: debug: fix possible memory leak in sof_dfsentry_write()
Wei Yongjun [Fri, 5 Jul 2019 08:16:37 +0000 (08:16 +0000)]
ASoC: SOF: debug: fix possible memory leak in sof_dfsentry_write()

'string' is malloced in sof_dfsentry_write() and should be freed
before leaving from the error handling cases, otherwise it will cause
memory leak.

Fixes: 091c12e1f50c ("ASoC: SOF: debug: add new debugfs entries for IPC flood test")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20190705081637.157169-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: sunxi: sun50i-codec-analog: Add earpiece
Luca Weiss [Wed, 3 Jul 2019 18:48:11 +0000 (20:48 +0200)]
ASoC: sunxi: sun50i-codec-analog: Add earpiece

This adds the necessary registers and audio routes to play audio using
the Earpiece, that's supported on the A64.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20190703184814.27191-1-luca@z3ntu.xyz
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: rt5665: remove redundant assignment to variable idx
Colin Ian King [Fri, 5 Jul 2019 07:53:03 +0000 (08:53 +0100)]
ASoC: rt5665: remove redundant assignment to variable idx

The variable idx is being initialized with a value that is never
read and it is being updated later with a new value. The
initialization is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190705075303.14692-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: wcd9335: remove multiple defines.
Srinivas Kandagatla [Thu, 4 Jul 2019 16:54:10 +0000 (17:54 +0100)]
ASoC: wcd9335: remove multiple defines.

Found during review that there are multiple defines of same constants.
This patch removes them!

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20190704165410.7173-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoALSA: cs4281: remove redundant assignment to variable val and remove a goto
Colin Ian King [Fri, 5 Jul 2019 09:57:04 +0000 (10:57 +0100)]
ALSA: cs4281: remove redundant assignment to variable val and remove a goto

The variable val is being assigned with a value that is never
read and it is being updated later with a new value. The
assignment is redundant and can be removed.  Also remove a
goto statement and a label and replace with a break statement.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: hda: Simplify snd_hdac_refresh_widgets()
Takashi Iwai [Wed, 3 Jul 2019 12:35:12 +0000 (14:35 +0200)]
ALSA: hda: Simplify snd_hdac_refresh_widgets()

Along with the recent fix for the races of snd_hdac_refresh_widgets()
it turned out that the instantiation of widgets sysfs at
snd_hdac_sysfs_reinit() could cause a race.  The race itself was
already covered later by extending the mutex protection range, the
commit 98482377dc72 ("ALSA: hda: Fix widget_mutex incomplete
protection"), but this also indicated that the call of *_reinit() is
basically superfluous, as the widgets shall be created sooner or later
from snd_hdac_device_register().

This patch removes the redundant call of snd_hdac_sysfs_reinit() at
first.  By this removal, the sysfs argument itself in
snd_hdac_refresh_widgets() becomes superfluous, too, because the only
case sysfs=false is always with codec->widgets=NULL.  So, we drop this
redundant argument as well.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: asihpi: Remove unneeded variable change
Hariprasad Kelam [Fri, 5 Jul 2019 02:57:33 +0000 (08:27 +0530)]
ALSA: asihpi: Remove unneeded variable change

this patch fixes below issue reported by coccicheck
sound/pci/asihpi/asihpi.c:1558:5-11: Unneeded variable: "change". Return
"1" on line 1564

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: usb-audio: Fix parse of UAC2 Extension Units
Takashi Iwai [Thu, 4 Jul 2019 14:31:12 +0000 (16:31 +0200)]
ALSA: usb-audio: Fix parse of UAC2 Extension Units

Extension Unit (XU) is used to have a compatible layout with
Processing Unit (PU) on UAC1, and the usb-audio driver code assumed it
for parsing the descriptors.  Meanwhile, on UAC2, XU became slightly
incompatible with PU; namely, XU has a one-byte bmControls bitmap
while PU has two bytes bmControls bitmap.  This incompatibility
results in the read of a wrong address for the last iExtension field,
which ended up with an incorrect string for the mixer element name, as
recently reported for Focusrite Scarlett 18i20 device.

This patch corrects this misalignment by introducing a couple of new
macros and calling them depending on the descriptor type.

Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0")
Reported-by: Stefan Sauer <ensonic@hora-obscura.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: hda/ca0132 - remove redundant assignment to variable 'changed'
Colin Ian King [Thu, 4 Jul 2019 12:44:25 +0000 (13:44 +0100)]
ALSA: hda/ca0132 - remove redundant assignment to variable 'changed'

The variable 'changed' is being initialized with a value that is never
read and it is being updated later with a new value. The initialization
is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: hda/realtek - Headphone Mic can't record after S3
Kailang Yang [Thu, 4 Jul 2019 08:02:10 +0000 (16:02 +0800)]
ALSA: hda/realtek - Headphone Mic can't record after S3

Dell headset mode platform with ALC236.
It doesn't recording after system resume from S3.
S3 mode was deep. s2idle was not has this issue.
S3 deep will cut of codec power. So, the register will back to default
after resume back.
This patch will solve this issue.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoASoC: audio-graph-card: fix use-after-free in graph_for_each_link
Wen Yang [Thu, 4 Jul 2019 08:38:50 +0000 (16:38 +0800)]
ASoC: audio-graph-card: fix use-after-free in graph_for_each_link

After calling of_node_put() on the codec_ep and codec_port variables,
they are still being used, which may result in use-after-free.
We fix this issue by calling of_node_put() after the last usage.

Fixes: fce9b90c1ab7 ("ASoC: audio-graph-card: cleanup DAI link loop method - step2")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/1562229530-8121-1-git-send-email-wen.yang99@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: qdsp6: q6afe-dai: Add missing Slimbus0 audio route
Srinivas Kandagatla [Wed, 3 Jul 2019 12:31:02 +0000 (13:31 +0100)]
ASoC: qdsp6: q6afe-dai: Add missing Slimbus0 audio route

For some reason SLIMBus RX0 playback is not added to audio routes.
This patch adds the missing route.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20190703123102.12626-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: core: Return -ENOTSUPP from set_channel_map() if no operation provided
Srinivas Kandagatla [Wed, 3 Jul 2019 12:30:02 +0000 (13:30 +0100)]
ASoC: core: Return -ENOTSUPP from set_channel_map() if no operation provided

It makes it easier for common code to work with snd_soc_dai_set_channel_map()
by distinguishing between operation not being supported and an error.
This is done inline with others snd_soc_dai.* apis.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20190703123002.12427-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: meson: axg-tdm-formatter: add reset
Jerome Brunet [Wed, 3 Jul 2019 12:07:49 +0000 (14:07 +0200)]
ASoC: meson: axg-tdm-formatter: add reset

Add the optional reset line handling which is present on the new SoC
families, such as the g12a. Triggering this reset is not critical but
it helps solve a channel shift issue on the g12a.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190703120749.32341-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: meson: axg-tdm-formatter: add reset to the bindings documentation
Jerome Brunet [Wed, 3 Jul 2019 12:07:48 +0000 (14:07 +0200)]
ASoC: meson: axg-tdm-formatter: add reset to the bindings documentation

Add an optional reset property to the tdm formatter bindings. The
dedicated reset line is present on some SoC families, such as the g12a.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190703120749.32341-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoALSA: line6: Fix write on zero-sized buffer
Takashi Iwai [Tue, 2 Jul 2019 18:07:21 +0000 (20:07 +0200)]
ALSA: line6: Fix write on zero-sized buffer

LINE6 drivers allocate the buffers based on the value returned from
usb_maxpacket() calls.  The manipulated device may return zero for
this, and this results in the kmalloc() with zero size (and it may
succeed) while the other part of the driver code writes the packet
data with the fixed size -- which eventually overwrites.

This patch adds a simple sanity check for the invalid buffer size for
avoiding that problem.

Reported-by: syzbot+219f00fb49874dcaea17@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoASoC: max98357a: avoid speaker pop when playback startup
Mac Chiang [Wed, 19 Jun 2019 10:18:33 +0000 (18:18 +0800)]
ASoC: max98357a: avoid speaker pop when playback startup

Loud speaker pop happens during playback even when in slience
playback. Specify Max98357a amp delay times to make sure
clocks are always earlier than sdmode on.

Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: pxa: pxa2xx-ac97.c: use devm_snd_soc_register_component()
Kuninori Morimoto [Fri, 28 Jun 2019 04:10:31 +0000 (13:10 +0900)]
ASoC: pxa: pxa2xx-ac97.c: use devm_snd_soc_register_component()

We have devm_xxx version of snd_soc_register_component,
let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: cros_ec_codec: use devm_snd_soc_register_component()
Kuninori Morimoto [Fri, 28 Jun 2019 04:09:50 +0000 (13:09 +0900)]
ASoC: cros_ec_codec: use devm_snd_soc_register_component()

We have devm_xxx version of snd_soc_register_component,
let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: ak4118: use devm_snd_soc_register_component()
Kuninori Morimoto [Fri, 28 Jun 2019 04:09:40 +0000 (13:09 +0900)]
ASoC: ak4118: use devm_snd_soc_register_component()

We have devm_xxx version of snd_soc_register_component,
let's use it.

This patch also removes related empty functions

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
5 years agoASoC: rt5682: use devm_snd_soc_register_component()
Kuninori Morimoto [Fri, 28 Jun 2019 04:09:28 +0000 (13:09 +0900)]
ASoC: rt5682: use devm_snd_soc_register_component()

We have devm_xxx version of snd_soc_register_component,
let's use it.

This patch also removes related empty functions

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>