Biao Huang [Thu, 5 Jan 2023 01:07:11 +0000 (09:07 +0800)]
stmmac: dwmac-mediatek: remove the dwmac_fix_mac_speed
In current driver, MAC will always enable 2ns delay in RGMII mode,
but that's not the correct usage.
Remove the dwmac_fix_mac_speed() in driver, and recommend "rgmii-id"
for phy-mode in device tree.
Fixes:
f2d356a6ab71 ("stmmac: dwmac-mediatek: add support for mt8195")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 5 Jan 2023 20:40:50 +0000 (12:40 -0800)]
Merge tag 'net-6.2-rc3' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi, and netfilter.
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons, avoid
null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught by
Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized
descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch and
kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with
WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal
document"
* tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
caif: fix memory leak in cfctrl_linkup_request()
inet: control sockets should not use current thread task_frag
net/ulp: prevent ULP without clone op from entering the LISTEN status
qed: allow sleep in qed_mcp_trace_dump()
MAINTAINERS: Update maintainers for ptp_vmw driver
usb: rndis_host: Secure rndis_query check against int overflow
net: dpaa: Fix dtsec check for PCS availability
octeontx2-pf: Fix lmtst ID used in aura free
drivers/net/bonding/bond_3ad: return when there's no aggregator
netfilter: ipset: Rework long task execution when adding/deleting entries
netfilter: ipset: fix hash:net,port,net hang with /0 subnet
net: sparx5: Fix reading of the MAC address
vxlan: Fix memory leaks in error path
net: sched: htb: fix htb_classify() kernel-doc
net: sched: cbq: dont intepret cls results when asked to drop
net: sched: atm: dont intepret cls results when asked to drop
dt-bindings: net: marvell,orion-mdio: Fix examples
dt-bindings: net: sun8i-emac: Add phy-supply property
net: ipa: use proper endpoint mask for suspend
selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
...
Linus Torvalds [Thu, 5 Jan 2023 20:06:40 +0000 (12:06 -0800)]
Merge tag 'gpio-fixes-for-v6.2-rc3' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"A reference leak fix, two fixes for using uninitialized variables and
more drivers converted to using immutable irqchips:
- fix a reference leak in gpio-sifive
- fix a potential use of an uninitialized variable in core gpiolib
- fix a potential use of an uninitialized variable in gpio-pca953x
- make GPIO irqchips immutable in gpio-pmic-eic-sprd, gpio-eic-sprd
and gpio-sprd"
* tag 'gpio-fixes-for-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sifive: Fix refcount leak in sifive_gpio_probe
gpio: sprd: Make the irqchip immutable
gpio: pmic-eic-sprd: Make the irqchip immutable
gpio: eic-sprd: Make the irqchip immutable
gpio: pca953x: avoid to use uninitialized value pinctrl
gpiolib: Fix using uninitialized lookup-flags on ACPI platforms
Linus Torvalds [Thu, 5 Jan 2023 19:24:33 +0000 (11:24 -0800)]
Merge tag 'fbdev-for-6.2-rc3' of git://git./linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- Fix Matrox G200eW initialization failure
- Fix build failure of offb driver when built as module
- Optimize stack usage in omapfb
* tag 'fbdev-for-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: omapfb: avoid stack overflow warning
fbdev: matroxfb: G200eW: Increase max memory from 1 MB to 16 MB
fbdev: atyfb: use strscpy() to instead of strncpy()
fbdev: omapfb: use strscpy() to instead of strncpy()
fbdev: make offb driver tristate
Arnd Bergmann [Thu, 15 Dec 2022 17:02:28 +0000 (18:02 +0100)]
fbdev: omapfb: avoid stack overflow warning
The dsi_irq_stats structure is a little too big to fit on the
stack of a 32-bit task, depending on the specific gcc options:
fbdev/omap2/omapfb/dss/dsi.c: In function 'dsi_dump_dsidev_irqs':
fbdev/omap2/omapfb/dss/dsi.c:1621:1: error: the frame size of 1064 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Since this is only a debugfs file, performance is not critical,
so just dynamically allocate it, and print an error message
in there in place of a failure code when the allocation fails.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Zhengchao Shao [Wed, 4 Jan 2023 06:51:46 +0000 (14:51 +0800)]
caif: fix memory leak in cfctrl_linkup_request()
When linktype is unknown or kzalloc failed in cfctrl_linkup_request(),
pkt is not released. Add release process to error path.
Fixes:
b482cd2053e3 ("net-caif: add CAIF core protocol stack")
Fixes:
8d545c8f958f ("caif: Disconnect without waiting for response")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230104065146.1153009-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Eric Dumazet [Tue, 3 Jan 2023 19:27:36 +0000 (19:27 +0000)]
inet: control sockets should not use current thread task_frag
Because ICMP handlers run from softirq contexts,
they must not use current thread task_frag.
Previously, all sockets allocated by inet_ctl_sock_create()
would use the per-socket page fragment, with no chance of
recursion.
Fixes:
98123866fcf3 ("Treewide: Stop corrupting socket's task_frag")
Reported-by: syzbot+bebc6f1acdf4cbb79b03@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Benjamin Coddington <bcodding@redhat.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/20230103192736.454149-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 3 Jan 2023 11:19:17 +0000 (12:19 +0100)]
net/ulp: prevent ULP without clone op from entering the LISTEN status
When an ULP-enabled socket enters the LISTEN status, the listener ULP data
pointer is copied inside the child/accepted sockets by sk_clone_lock().
The relevant ULP can take care of de-duplicating the context pointer via
the clone() operation, but only MPTCP and SMC implement such op.
Other ULPs may end-up with a double-free at socket disposal time.
We can't simply clear the ULP data at clone time, as TLS replaces the
socket ops with custom ones assuming a valid TLS ULP context is
available.
Instead completely prevent clone-less ULP sockets from entering the
LISTEN status.
Fixes:
734942cc4ea6 ("tcp: ULP infrastructure")
Reported-by: slipper <slipper.alive@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/4b80c3d1dbe3d0ab072f80450c202d9bc88b4b03.1672740602.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Caleb Sander [Tue, 3 Jan 2023 23:30:21 +0000 (16:30 -0700)]
qed: allow sleep in qed_mcp_trace_dump()
By default, qed_mcp_cmd_and_union() delays 10us at a time in a loop
that can run 500K times, so calls to qed_mcp_nvm_rd_cmd()
may block the current thread for over 5s.
We observed thread scheduling delays over 700ms in production,
with stacktraces pointing to this code as the culprit.
qed_mcp_trace_dump() is called from ethtool, so sleeping is permitted.
It already can sleep in qed_mcp_halt(), which calls qed_mcp_cmd().
Add a "can sleep" parameter to qed_find_nvram_image() and
qed_nvram_read() so they can sleep during qed_mcp_trace_dump().
qed_mcp_trace_get_meta_info() and qed_mcp_trace_read_meta(),
called only by qed_mcp_trace_dump(), allow these functions to sleep.
I can't tell if the other caller (qed_grc_dump_mcp_hw_dump()) can sleep,
so keep b_can_sleep set to false when it calls these functions.
An example stacktrace from a custom warning we added to the kernel
showing a thread that has not scheduled despite long needing resched:
[ 2745.362925,17] ------------[ cut here ]------------
[ 2745.362941,17] WARNING: CPU: 23 PID: 5640 at arch/x86/kernel/irq.c:233 do_IRQ+0x15e/0x1a0()
[ 2745.362946,17] Thread not rescheduled for 744 ms after irq 99
[ 2745.362956,17] Modules linked in: ...
[ 2745.363339,17] CPU: 23 PID: 5640 Comm: lldpd Tainted: P O 4.4.182+ #
202104120910+
6d1da174272d.61x
[ 2745.363343,17] Hardware name: FOXCONN MercuryB/Quicksilver Controller, BIOS H11P1N09 07/08/2020
[ 2745.363346,17]
0000000000000000 ffff885ec07c3ed8 ffffffff8131eb2f ffff885ec07c3f20
[ 2745.363358,17]
ffffffff81d14f64 ffff885ec07c3f10 ffffffff81072ac2 ffff88be98ed0000
[ 2745.363369,17]
0000000000000063 0000000000000174 0000000000000074 0000000000000000
[ 2745.363379,17] Call Trace:
[ 2745.363382,17] <IRQ> [<
ffffffff8131eb2f>] dump_stack+0x8e/0xcf
[ 2745.363393,17] [<
ffffffff81072ac2>] warn_slowpath_common+0x82/0xc0
[ 2745.363398,17] [<
ffffffff81072b4c>] warn_slowpath_fmt+0x4c/0x50
[ 2745.363404,17] [<
ffffffff810d5a8e>] ? rcu_irq_exit+0xae/0xc0
[ 2745.363408,17] [<
ffffffff817c99fe>] do_IRQ+0x15e/0x1a0
[ 2745.363413,17] [<
ffffffff817c7ac9>] common_interrupt+0x89/0x89
[ 2745.363416,17] <EOI> [<
ffffffff8132aa74>] ? delay_tsc+0x24/0x50
[ 2745.363425,17] [<
ffffffff8132aa04>] __udelay+0x34/0x40
[ 2745.363457,17] [<
ffffffffa04d45ff>] qed_mcp_cmd_and_union+0x36f/0x7d0 [qed]
[ 2745.363473,17] [<
ffffffffa04d5ced>] qed_mcp_nvm_rd_cmd+0x4d/0x90 [qed]
[ 2745.363490,17] [<
ffffffffa04e1dc7>] qed_mcp_trace_dump+0x4a7/0x630 [qed]
[ 2745.363504,17] [<
ffffffffa04e2556>] ? qed_fw_asserts_dump+0x1d6/0x1f0 [qed]
[ 2745.363520,17] [<
ffffffffa04e4ea7>] qed_dbg_mcp_trace_get_dump_buf_size+0x37/0x80 [qed]
[ 2745.363536,17] [<
ffffffffa04ea881>] qed_dbg_feature_size+0x61/0xa0 [qed]
[ 2745.363551,17] [<
ffffffffa04eb427>] qed_dbg_all_data_size+0x247/0x260 [qed]
[ 2745.363560,17] [<
ffffffffa0482c10>] qede_get_regs_len+0x30/0x40 [qede]
[ 2745.363566,17] [<
ffffffff816c9783>] ethtool_get_drvinfo+0xe3/0x190
[ 2745.363570,17] [<
ffffffff816cc152>] dev_ethtool+0x1362/0x2140
[ 2745.363575,17] [<
ffffffff8109bcc6>] ? finish_task_switch+0x76/0x260
[ 2745.363580,17] [<
ffffffff817c2116>] ? __schedule+0x3c6/0x9d0
[ 2745.363585,17] [<
ffffffff810dbd50>] ? hrtimer_start_range_ns+0x1d0/0x370
[ 2745.363589,17] [<
ffffffff816c1e5b>] ? dev_get_by_name_rcu+0x6b/0x90
[ 2745.363594,17] [<
ffffffff816de6a8>] dev_ioctl+0xe8/0x710
[ 2745.363599,17] [<
ffffffff816a58a8>] sock_do_ioctl+0x48/0x60
[ 2745.363603,17] [<
ffffffff816a5d87>] sock_ioctl+0x1c7/0x280
[ 2745.363608,17] [<
ffffffff8111f393>] ? seccomp_phase1+0x83/0x220
[ 2745.363612,17] [<
ffffffff811e3503>] do_vfs_ioctl+0x2b3/0x4e0
[ 2745.363616,17] [<
ffffffff811e3771>] SyS_ioctl+0x41/0x70
[ 2745.363619,17] [<
ffffffff817c6ffe>] entry_SYSCALL_64_fastpath+0x1e/0x79
[ 2745.363622,17] ---[ end trace
f6954aa440266421 ]---
Fixes:
c965db4446291 ("qed: Add support for debug data collection")
Signed-off-by: Caleb Sander <csander@purestorage.com>
Acked-by: Alok Prasad <palok@marvell.com>
Link: https://lore.kernel.org/r/20230103233021.1457646-1-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 5 Jan 2023 04:17:19 +0000 (20:17 -0800)]
Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
bpf 2023-01-04
We've added 5 non-merge commits during the last 8 day(s) which contain
a total of 5 files changed, 112 insertions(+), 18 deletions(-).
The main changes are:
1) Always use maximal size for copy_array in the verifier to fix
KASAN tracking, from Kees.
2) Fix bpf task iterator walking through dead tasks, from Kui-Feng.
3) Make sure livepatch and bpf fexit can coexist, from Chuang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Always use maximal size for copy_array()
selftests/bpf: add a test for iter/task_vma for short-lived processes
bpf: keep a reference to the mm, in case the task is dead.
selftests/bpf: Temporarily disable part of btf_dump:var_data test.
bpf: Fix panic due to wrong pageattr of im->image
====================
Link: https://lore.kernel.org/r/20230104215500.79435-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 5 Jan 2023 01:13:53 +0000 (17:13 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Mostly fixes all over the place, a couple of cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (32 commits)
virtio_blk: Fix signedness bug in virtblk_prep_rq()
vdpa_sim_net: should not drop the multicast/broadcast packet
vdpasim: fix memory leak when freeing IOTLBs
vdpa: conditionally fill max max queue pair for stats
vdpa/vp_vdpa: fix kfree a wrong pointer in vp_vdpa_remove
vduse: Validate vq_num in vduse_validate_config()
tools/virtio: remove smp_read_barrier_depends()
tools/virtio: remove stray characters
vhost_vdpa: fix the crash in unmap a large memory
virtio: Implementing attribute show with sysfs_emit
virtio-crypto: fix memory leak in virtio_crypto_alg_skcipher_close_session()
tools/virtio: Variable type completion
vdpa_sim: fix vringh initialization in vdpasim_queue_ready()
virtio_blk: use UINT_MAX instead of -1U
vhost-vdpa: fix an iotlb memory leak
vhost: fix range used in translate_desc()
vringh: fix range used in iotlb_translate()
vhost/vsock: Fix error handling in vhost_vsock_init()
vdpa_sim: fix possible memory leak in vdpasim_net_init() and vdpasim_blk_init()
tools: Delete the unneeded semicolon after curly braces
...
Linus Torvalds [Wed, 4 Jan 2023 20:11:29 +0000 (12:11 -0800)]
Merge tag 'x86-urgent-2023-01-04' of git://git./linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
"Fix a double-free bug, a binutils warning, a header namespace clash
and a bug in ib_prctl_set()"
* tag 'x86-urgent-2023-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Flush IBP in ib_prctl_set()
x86/insn: Avoid namespace clash by separating instruction decoder MMIO type from MMIO trace type
x86/asm: Fix an assembler warning with current binutils
x86/kexec: Fix double-free of elf header buffer
Linus Torvalds [Wed, 4 Jan 2023 20:02:26 +0000 (12:02 -0800)]
Merge tag 'f2fs-fix-6.2-rc3' of git://git./linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
- fix a null pointer dereference in f2fs_issue_flush, which occurs by
the combination of mount/remount options.
- fix a bug in per-block age-based extent_cache newly introduced in
6.2-rc1, which reported a wrong age information in extent_cache.
- fix a kernel panic if extent_tree was not created, which was caught
by a wrong BUG_ON
* tag 'f2fs-fix-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: let's avoid panic if extent_tree is not created
f2fs: should use a temp extent_info for lookup
f2fs: don't mix to use union values in extent_info
f2fs: initialize extent_cache parameter
f2fs: fix to avoid NULL pointer dereference in f2fs_issue_flush()
Linus Torvalds [Wed, 4 Jan 2023 19:26:36 +0000 (11:26 -0800)]
Merge tag 'nfsd-6.2-2' of git://git./linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a filecache UAF during NFSD shutdown
- Avoid exposing automounted mounts on NFS re-exports
* tag 'nfsd-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix handling of readdir in v4root vs. mount upcall timeout
nfsd: shut down the NFSv4 state objects before the filecache
Rodrigo Branco [Tue, 3 Jan 2023 20:17:51 +0000 (14:17 -0600)]
x86/bugs: Flush IBP in ib_prctl_set()
We missed the window between the TIF flag update and the next reschedule.
Signed-off-by: Rodrigo Branco <bsdaemon@google.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Srivatsa S. Bhat (VMware) [Tue, 3 Jan 2023 22:09:41 +0000 (14:09 -0800)]
MAINTAINERS: Update maintainers for ptp_vmw driver
Vivek has decided to transfer the maintainership of the VMware virtual
PTP clock driver (ptp_vmw) to Srivatsa and Deep. Update the
MAINTAINERS file to reflect this change, and also add Alexey as a
reviewer for the driver.
Signed-off-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Acked-by: Vivek Thampi <vivek@vivekthampi.com>
Acked-by: Deep Shah <sdeep@vmware.com>
Acked-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Sun, 1 Jan 2023 16:29:04 +0000 (17:29 +0100)]
x86/insn: Avoid namespace clash by separating instruction decoder MMIO type from MMIO trace type
Both <linux/mmiotrace.h> and <asm/insn-eval.h> define various MMIO_ enum constants,
whose namespace overlaps.
Rename the <asm/insn-eval.h> ones to have a INSN_ prefix, so that the headers can be
used from the same source file.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230101162910.710293-2-Jason@zx2c4.com
Jaegeuk Kim [Thu, 22 Dec 2022 00:14:10 +0000 (16:14 -0800)]
f2fs: let's avoid panic if extent_tree is not created
This patch avoids the below panic.
pc : __lookup_extent_tree+0xd8/0x760
lr : f2fs_do_write_data_page+0x104/0x87c
sp :
ffffffc010cbb3c0
x29:
ffffffc010cbb3e0 x28:
0000000000000000
x27:
ffffff8803e7f020 x26:
ffffff8803e7ed40
x25:
ffffff8803e7f020 x24:
ffffffc010cbb460
x23:
ffffffc010cbb480 x22:
0000000000000000
x21:
0000000000000000 x20:
ffffffff22e90900
x19:
0000000000000000 x18:
ffffffc010c5d080
x17:
0000000000000000 x16:
0000000000000020
x15:
ffffffdb1acdbb88 x14:
ffffff888759e2b0
x13:
0000000000000000 x12:
ffffff802da49000
x11:
000000000a001200 x10:
ffffff8803e7ed40
x9 :
ffffff8023195800 x8 :
ffffff802da49078
x7 :
0000000000000001 x6 :
0000000000000000
x5 :
0000000000000006 x4 :
ffffffc010cbba28
x3 :
0000000000000000 x2 :
ffffffc010cbb480
x1 :
0000000000000000 x0 :
ffffff8803e7ed40
Call trace:
__lookup_extent_tree+0xd8/0x760
f2fs_do_write_data_page+0x104/0x87c
f2fs_write_single_data_page+0x420/0xb60
f2fs_write_cache_pages+0x418/0xb1c
__f2fs_write_data_pages+0x428/0x58c
f2fs_write_data_pages+0x30/0x40
do_writepages+0x88/0x190
__writeback_single_inode+0x48/0x448
writeback_sb_inodes+0x468/0x9e8
__writeback_inodes_wb+0xb8/0x2a4
wb_writeback+0x33c/0x740
wb_do_writeback+0x2b4/0x400
wb_workfn+0xe4/0x34c
process_one_work+0x24c/0x5bc
worker_thread+0x3e8/0xa50
kthread+0x150/0x1b4
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Sat, 17 Dec 2022 00:36:36 +0000 (16:36 -0800)]
f2fs: should use a temp extent_info for lookup
Otherwise, __lookup_extent_tree() will override the given extent_info which will
be used by caller.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Fri, 16 Dec 2022 22:41:54 +0000 (14:41 -0800)]
f2fs: don't mix to use union values in extent_info
Let's explicitly use the defined values in block_age case only.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Fri, 16 Dec 2022 22:05:44 +0000 (14:05 -0800)]
f2fs: initialize extent_cache parameter
This can avoid confusing tracepoint values.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu [Fri, 30 Dec 2022 15:43:32 +0000 (23:43 +0800)]
f2fs: fix to avoid NULL pointer dereference in f2fs_issue_flush()
With below two cases, it will cause NULL pointer dereference when
accessing SM_I(sbi)->fcc_info in f2fs_issue_flush().
a) If kthread_run() fails in f2fs_create_flush_cmd_control(), it will
release SM_I(sbi)->fcc_info,
- mount -o noflush_merge /dev/vda /mnt/f2fs
- mount -o remount,flush_merge /dev/vda /mnt/f2fs -- kthread_run() fails
- dd if=/dev/zero of=/mnt/f2fs/file bs=4k count=1 conv=fsync
b) we will never allocate memory for SM_I(sbi)->fcc_info w/ below
testcase,
- mount -o ro /dev/vda /mnt/f2fs
- mount -o rw,remount /dev/vda /mnt/f2fs
- dd if=/dev/zero of=/mnt/f2fs/file bs=4k count=1 conv=fsync
In order to fix this issue, let change as below:
- fix error path handling in f2fs_create_flush_cmd_control().
- allocate SM_I(sbi)->fcc_info even if readonly is on.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Mikulas Patocka [Tue, 3 Jan 2023 15:24:11 +0000 (10:24 -0500)]
x86/asm: Fix an assembler warning with current binutils
Fix a warning: "found `movsd'; assuming `movsl' was meant"
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Szymon Heidrich [Tue, 3 Jan 2023 09:17:09 +0000 (10:17 +0100)]
usb: rndis_host: Secure rndis_query check against int overflow
Variables off and len typed as uint32 in rndis_query function
are controlled by incoming RNDIS response message thus their
value may be manipulated. Setting off to a unexpectetly large
value will cause the sum with len and 8 to overflow and pass
the implemented validation step. Consequently the response
pointer will be referring to a location past the expected
buffer boundaries allowing information leakage e.g. via
RNDIS_OID_802_3_PERMANENT_ADDRESS OID.
Fixes:
ddda08624013 ("USB: rndis_host, various cleanups")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Anderson [Tue, 3 Jan 2023 06:50:38 +0000 (01:50 -0500)]
net: dpaa: Fix dtsec check for PCS availability
We want to fail if the PCS is not available, not if it is available. Fix
this condition.
Fixes:
5d93cfcf7360 ("net: dpaa: Convert to phylink")
Reported-by: Christian Zigotzky <info@xenosoft.de>
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geetha sowjanya [Tue, 3 Jan 2023 03:50:12 +0000 (09:20 +0530)]
octeontx2-pf: Fix lmtst ID used in aura free
Current code uses per_cpu pointer to get the lmtst_id mapped to
the core on which aura_free() is executed. Using per_cpu pointer
without preemption disable causing mismatch between lmtst_id and
core on which pointer gets freed. This patch fixes the issue by
disabling preemption around aura_free.
Fixes:
ef6c8da71eaf ("octeontx2-pf: cn10K: Reserve LMTST lines per core")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniil Tatianin [Mon, 2 Jan 2023 09:53:35 +0000 (12:53 +0300)]
drivers/net/bonding/bond_3ad: return when there's no aggregator
Otherwise we would dereference a NULL aggregator pointer when calling
__set_agg_ports_ready on the line below.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 3 Jan 2023 09:12:22 +0000 (09:12 +0000)]
Merge git://git./linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Use signed integer in ipv6_skip_exthdr() called from nf_confirm().
Reported by static analysis tooling, patch from Florian Westphal.
2) Missing set type checks in nf_tables: Validate that set declaration
matches the an existing set type, otherwise bail out with EEXIST.
Currently, nf_tables silently accepts the re-declaration with a
different type but it bails out later with EINVAL when the user adds
entries to the set. This fix is relatively large because it requires
two preparation patches that are included in this batch.
3) Do not ignore updates of timeout and gc_interval parameters in
existing sets.
4) Fix a hang when 0/0 subnets is added to a hash:net,port,net type of
ipset. Except hash:net,port,net and hash:net,iface, the set types don't
support 0/0 and the auxiliary functions rely on this fact. So 0/0 needs
a special handling in hash:net,port,net which was missing (hash:net,iface
was not affected by this bug), from Jozsef Kadlecsik.
5) When adding/deleting large number of elements in one step in ipset,
it can take a reasonable amount of time and can result in soft lockup
errors. This patch is a complete rework of the previous version in order
to use a smaller internal batch limit and at the same time removing
the external hard limit to add arbitrary number of elements in one step.
Also from Jozsef Kadlecsik.
Except for patch #1, which fixes a bug introduced in the previous net-next
development cycle, anything else has been broken for several releases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 2 Jan 2023 19:06:18 +0000 (11:06 -0800)]
Merge tag 'for-6.2-rc2-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"First batch of regression and regular fixes:
- regressions:
- fix error handling after conversion to qstr for paths
- fix raid56/scrub recovery caused by uninitialized variable
after conversion to error bitmaps
- restore qgroup backref lookup behaviour after recent
refactoring
- fix leak of device lists at module exit time
- fix resolving backrefs for inline extent followed by prealloc
- reset defrag ioctl buffer on memory allocation error"
* tag 'for-6.2-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix fscrypt name leak after failure to join log transaction
btrfs: scrub: fix uninitialized return value in recover_scrub_rbio
btrfs: fix resolving backrefs for inline extent followed by prealloc
btrfs: fix trace event name typo for FLUSH_DELAYED_REFS
btrfs: restore BTRFS_SEQ_LAST when looking up qgroup backref lookup
btrfs: fix leak of fs devices after removing btrfs module
btrfs: fix an error handling path in btrfs_defrag_leaves()
btrfs: fix an error handling path in btrfs_rename()
Tetsuo Handa [Mon, 2 Jan 2023 14:05:33 +0000 (23:05 +0900)]
fs/ntfs3: don't hold ni_lock when calling truncate_setsize()
syzbot is reporting hung task at do_user_addr_fault() [1], for there is
a silent deadlock between PG_locked bit and ni_lock lock.
Since filemap_update_page() calls filemap_read_folio() after calling
folio_trylock() which will set PG_locked bit, ntfs_truncate() must not
call truncate_setsize() which will wait for PG_locked bit to be cleared
when holding ni_lock lock.
Link: https://lore.kernel.org/all/00000000000060d41f05f139aa44@google.com/
Link: https://syzkaller.appspot.com/bug?extid=bed15dbf10294aa4f2ae
Reported-by: syzbot <syzbot+bed15dbf10294aa4f2ae@syzkaller.appspotmail.com>
Debugged-by: Linus Torvalds <torvalds@linux-foundation.org>
Co-developed-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes:
4342306f0f0d ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Takashi Iwai [Tue, 22 Nov 2022 11:51:22 +0000 (12:51 +0100)]
x86/kexec: Fix double-free of elf header buffer
After
b3e34a47f989 ("x86/kexec: fix memory leak of elf header buffer"),
freeing image->elf_headers in the error path of crash_load_segments()
is not needed because kimage_file_post_load_cleanup() will take
care of that later. And not clearing it could result in a double-free.
Drop the superfluous vfree() call at the error path of
crash_load_segments().
Fixes:
b3e34a47f989 ("x86/kexec: fix memory leak of elf header buffer")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20221122115122.13937-1-tiwai@suse.de
Jeff Layton [Tue, 13 Dec 2022 18:08:26 +0000 (13:08 -0500)]
nfsd: fix handling of readdir in v4root vs. mount upcall timeout
If v4 READDIR operation hits a mountpoint and gets back an error,
then it will include that entry in the reply and set RDATTR_ERROR for it
to the error.
That's fine for "normal" exported filesystems, but on the v4root, we
need to be more careful to only expose the existence of dentries that
lead to exports.
If the mountd upcall times out while checking to see whether a
mountpoint on the v4root is exported, then we have no recourse other
than to fail the whole operation.
Cc: Steve Dickson <steved@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216777
Reported-by: JianHong Yin <yin-jianhong@163.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Paul Menzel [Mon, 2 Jan 2023 13:57:30 +0000 (14:57 +0100)]
fbdev: matroxfb: G200eW: Increase max memory from 1 MB to 16 MB
Commit
62d89a7d49af ("video: fbdev: matroxfb: set maxvram of vbG200eW to
the same as vbG200 to avoid black screen") accidently decreases the
maximum memory size for the Matrox G200eW (102b:0532) from 8 MB to 1 MB
by missing one zero. This caused the driver initialization to fail with
the messages below, as the minimum required VRAM size is 2 MB:
[ 9.436420] matroxfb: Matrox MGA-G200eW (PCI) detected
[ 9.444502] matroxfb: cannot determine memory size
[ 9.449316] matroxfb: probe of 0000:0a:03.0 failed with error -1
So, add the missing 0 to make it the intended 16 MB. Successfully tested on
the Dell PowerEdge R910/0KYD3D, BIOS 2.10.0 08/29/2013, that the warning is
gone.
While at it, add a leading 0 to the maxdisplayable entry, so it’s aligned
properly. The value could probably also be increased from 8 MB to 16 MB, as
the G200 uses the same values, but I have not checked any datasheet.
Note, matroxfb is obsolete and superseded by the maintained DRM driver
mga200, which is used by default on most systems where both drivers are
available. Therefore, on most systems it was only a cosmetic issue.
Fixes:
62d89a7d49af ("video: fbdev: matroxfb: set maxvram of vbG200eW to the same as vbG200 to avoid black screen")
Link: https://lore.kernel.org/linux-fbdev/972999d3-b75d-5680-fcef-6e6905c52ac5@suse.de/T/#mb6953a9995ebd18acc8552f99d6db39787aec775
Cc: it+linux-fbdev@molgen.mpg.de
Cc: Z. Liu <liuzx@knownsec.com>
Cc: Rich Felker <dalias@libc.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Jozsef Kadlecsik [Fri, 30 Dec 2022 12:24:38 +0000 (13:24 +0100)]
netfilter: ipset: Rework long task execution when adding/deleting entries
When adding/deleting large number of elements in one step in ipset, it can
take a reasonable amount of time and can result in soft lockup errors. The
patch
5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of
consecutive elements to add/delete") tried to fix it by limiting the max
elements to process at all. However it was not enough, it is still possible
that we get hung tasks. Lowering the limit is not reasonable, so the
approach in this patch is as follows: rely on the method used at resizing
sets and save the state when we reach a smaller internal batch limit,
unlock/lock and proceed from the saved state. Thus we can avoid long
continuous tasks and at the same time removed the limit to add/delete large
number of elements in one step.
The nfnl mutex is held during the whole operation which prevents one to
issue other ipset commands in parallel.
Fixes:
5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete")
Reported-by: syzbot+9204e7399656300bf271@syzkaller.appspotmail.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jozsef Kadlecsik [Fri, 30 Dec 2022 12:24:37 +0000 (13:24 +0100)]
netfilter: ipset: fix hash:net,port,net hang with /0 subnet
The hash:net,port,net set type supports /0 subnets. However, the patch
commit
5f7b51bf09baca8e titled "netfilter: ipset: Limit the maximal range
of consecutive elements to add/delete" did not take into account it and
resulted in an endless loop. The bug is actually older but the patch
5f7b51bf09baca8e brings it out earlier.
Handle /0 subnets properly in hash:net,port,net set types.
Fixes:
5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete")
Reported-by: Марк Коренберг <socketpair@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Horatiu Vultur [Mon, 2 Jan 2023 12:12:15 +0000 (13:12 +0100)]
net: sparx5: Fix reading of the MAC address
There is an issue with the checking of the return value of
'of_get_mac_address', which returns 0 on success and negative value on
failure. The driver interpretated the result the opposite way. Therefore
if there was a MAC address defined in the DT, then the driver was
generating a random MAC address otherwise it would use address 0.
Fix this by checking correctly the return value of 'of_get_mac_address'
Fixes:
b74ef9f9cb91 ("net: sparx5: Do not use mac_addr uninitialized in mchp_sparx5_probe()")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 2 Jan 2023 06:55:56 +0000 (08:55 +0200)]
vxlan: Fix memory leaks in error path
The memory allocated by vxlan_vnigroup_init() is not freed in the error
path, leading to memory leaks [1]. Fix by calling
vxlan_vnigroup_uninit() in the error path.
The leaks can be reproduced by annotating gro_cells_init() with
ALLOW_ERROR_INJECTION() and then running:
# echo "100" > /sys/kernel/debug/fail_function/probability
# echo "1" > /sys/kernel/debug/fail_function/times
# echo "gro_cells_init" > /sys/kernel/debug/fail_function/inject
# printf %#x -12 > /sys/kernel/debug/fail_function/gro_cells_init/retval
# ip link add name vxlan0 type vxlan dstport 4789 external vnifilter
RTNETLINK answers: Cannot allocate memory
[1]
unreferenced object 0xffff88810db84a00 (size 512):
comm "ip", pid 330, jiffies
4295010045 (age 66.016s)
hex dump (first 32 bytes):
f8 d5 76 0e 81 88 ff ff 01 00 00 00 00 00 00 02 ..v.............
03 00 04 00 48 00 00 00 00 00 00 01 04 00 01 00 ....H...........
backtrace:
[<
ffffffff81a3097a>] kmalloc_trace+0x2a/0x60
[<
ffffffff82f049fc>] vxlan_vnigroup_init+0x4c/0x160
[<
ffffffff82ecd69e>] vxlan_init+0x1ae/0x280
[<
ffffffff836858ca>] register_netdevice+0x57a/0x16d0
[<
ffffffff82ef67b7>] __vxlan_dev_create+0x7c7/0xa50
[<
ffffffff82ef6ce6>] vxlan_newlink+0xd6/0x130
[<
ffffffff836d02ab>] __rtnl_newlink+0x112b/0x18a0
[<
ffffffff836d0a8c>] rtnl_newlink+0x6c/0xa0
[<
ffffffff836c0ddf>] rtnetlink_rcv_msg+0x43f/0xd40
[<
ffffffff83908ce0>] netlink_rcv_skb+0x170/0x440
[<
ffffffff839066af>] netlink_unicast+0x53f/0x810
[<
ffffffff839072d8>] netlink_sendmsg+0x958/0xe70
[<
ffffffff835c319f>] ____sys_sendmsg+0x78f/0xa90
[<
ffffffff835cd6da>] ___sys_sendmsg+0x13a/0x1e0
[<
ffffffff835cd94c>] __sys_sendmsg+0x11c/0x1f0
[<
ffffffff8424da78>] do_syscall_64+0x38/0x80
unreferenced object 0xffff88810e76d5f8 (size 192):
comm "ip", pid 330, jiffies
4295010045 (age 66.016s)
hex dump (first 32 bytes):
04 00 00 00 00 00 00 00 db e1 4f e7 00 00 00 00 ..........O.....
08 d6 76 0e 81 88 ff ff 08 d6 76 0e 81 88 ff ff ..v.......v.....
backtrace:
[<
ffffffff81a3162e>] __kmalloc_node+0x4e/0x90
[<
ffffffff81a0e166>] kvmalloc_node+0xa6/0x1f0
[<
ffffffff8276e1a3>] bucket_table_alloc.isra.0+0x83/0x460
[<
ffffffff8276f18b>] rhashtable_init+0x43b/0x7c0
[<
ffffffff82f04a1c>] vxlan_vnigroup_init+0x6c/0x160
[<
ffffffff82ecd69e>] vxlan_init+0x1ae/0x280
[<
ffffffff836858ca>] register_netdevice+0x57a/0x16d0
[<
ffffffff82ef67b7>] __vxlan_dev_create+0x7c7/0xa50
[<
ffffffff82ef6ce6>] vxlan_newlink+0xd6/0x130
[<
ffffffff836d02ab>] __rtnl_newlink+0x112b/0x18a0
[<
ffffffff836d0a8c>] rtnl_newlink+0x6c/0xa0
[<
ffffffff836c0ddf>] rtnetlink_rcv_msg+0x43f/0xd40
[<
ffffffff83908ce0>] netlink_rcv_skb+0x170/0x440
[<
ffffffff839066af>] netlink_unicast+0x53f/0x810
[<
ffffffff839072d8>] netlink_sendmsg+0x958/0xe70
[<
ffffffff835c319f>] ____sys_sendmsg+0x78f/0xa90
Fixes:
f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Mon, 2 Jan 2023 07:17:37 +0000 (23:17 -0800)]
net: sched: htb: fix htb_classify() kernel-doc
Fix W=1 kernel-doc warning:
net/sched/sch_htb.c:214: warning: expecting prototype for htb_classify(). Prototype was for HTB_DIRECT() instead
by moving the HTB_DIRECT() macro above the function.
Add kernel-doc notation for function parameters as well.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 2 Jan 2023 13:32:43 +0000 (13:32 +0000)]
Merge branch 'cls_drop-fix'
Jamal Hadi Salim says:
====================
net: dont intepret cls results when asked to drop
It is possible that an error in processing may occur in tcf_classify() which
will result in res.classid being some garbage value. Example of such a code path
is when the classifier goes into a loop due to bad policy. See patch 1/2
for a sample splat.
While the core code reacts correctly and asks the caller to drop the packet
(by returning TC_ACT_SHOT) some callers first intepret the res.class as
a pointer to memory and end up dropping the packet only after some activity with
the pointer. There is likelihood of this resulting in an exploit. So lets fix
all the known qdiscs that behave this way.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim [Sun, 1 Jan 2023 21:57:44 +0000 (16:57 -0500)]
net: sched: cbq: dont intepret cls results when asked to drop
If asked to drop a packet via TC_ACT_SHOT it is unsafe to assume that
res.class contains a valid pointer
Sample splat reported by Kyle Zeng
[ 5.405624] 0: reclassify loop, rule prio 0, protocol 800
[ 5.406326] ==================================================================
[ 5.407240] BUG: KASAN: slab-out-of-bounds in cbq_enqueue+0x54b/0xea0
[ 5.407987] Read of size 1 at addr
ffff88800e3122aa by task poc/299
[ 5.408731]
[ 5.408897] CPU: 0 PID: 299 Comm: poc Not tainted 5.10.155+ #15
[ 5.409516] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.15.0-1 04/01/2014
[ 5.410439] Call Trace:
[ 5.410764] dump_stack+0x87/0xcd
[ 5.411153] print_address_description+0x7a/0x6b0
[ 5.411687] ? vprintk_func+0xb9/0xc0
[ 5.411905] ? printk+0x76/0x96
[ 5.412110] ? cbq_enqueue+0x54b/0xea0
[ 5.412323] kasan_report+0x17d/0x220
[ 5.412591] ? cbq_enqueue+0x54b/0xea0
[ 5.412803] __asan_report_load1_noabort+0x10/0x20
[ 5.413119] cbq_enqueue+0x54b/0xea0
[ 5.413400] ? __kasan_check_write+0x10/0x20
[ 5.413679] __dev_queue_xmit+0x9c0/0x1db0
[ 5.413922] dev_queue_xmit+0xc/0x10
[ 5.414136] ip_finish_output2+0x8bc/0xcd0
[ 5.414436] __ip_finish_output+0x472/0x7a0
[ 5.414692] ip_finish_output+0x5c/0x190
[ 5.414940] ip_output+0x2d8/0x3c0
[ 5.415150] ? ip_mc_finish_output+0x320/0x320
[ 5.415429] __ip_queue_xmit+0x753/0x1760
[ 5.415664] ip_queue_xmit+0x47/0x60
[ 5.415874] __tcp_transmit_skb+0x1ef9/0x34c0
[ 5.416129] tcp_connect+0x1f5e/0x4cb0
[ 5.416347] tcp_v4_connect+0xc8d/0x18c0
[ 5.416577] __inet_stream_connect+0x1ae/0xb40
[ 5.416836] ? local_bh_enable+0x11/0x20
[ 5.417066] ? lock_sock_nested+0x175/0x1d0
[ 5.417309] inet_stream_connect+0x5d/0x90
[ 5.417548] ? __inet_stream_connect+0xb40/0xb40
[ 5.417817] __sys_connect+0x260/0x2b0
[ 5.418037] __x64_sys_connect+0x76/0x80
[ 5.418267] do_syscall_64+0x31/0x50
[ 5.418477] entry_SYSCALL_64_after_hwframe+0x61/0xc6
[ 5.418770] RIP: 0033:0x473bb7
[ 5.418952] Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00
00 00 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2a 00 00
00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 18 89 54 24 0c 48 89 34
24 89
[ 5.420046] RSP: 002b:
00007fffd20eb0f8 EFLAGS:
00000246 ORIG_RAX:
000000000000002a
[ 5.420472] RAX:
ffffffffffffffda RBX:
00007fffd20eb578 RCX:
0000000000473bb7
[ 5.420872] RDX:
0000000000000010 RSI:
00007fffd20eb110 RDI:
0000000000000007
[ 5.421271] RBP:
00007fffd20eb150 R08:
0000000000000001 R09:
0000000000000004
[ 5.421671] R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000001
[ 5.422071] R13:
00007fffd20eb568 R14:
00000000004fc740 R15:
0000000000000002
[ 5.422471]
[ 5.422562] Allocated by task 299:
[ 5.422782] __kasan_kmalloc+0x12d/0x160
[ 5.423007] kasan_kmalloc+0x5/0x10
[ 5.423208] kmem_cache_alloc_trace+0x201/0x2e0
[ 5.423492] tcf_proto_create+0x65/0x290
[ 5.423721] tc_new_tfilter+0x137e/0x1830
[ 5.423957] rtnetlink_rcv_msg+0x730/0x9f0
[ 5.424197] netlink_rcv_skb+0x166/0x300
[ 5.424428] rtnetlink_rcv+0x11/0x20
[ 5.424639] netlink_unicast+0x673/0x860
[ 5.424870] netlink_sendmsg+0x6af/0x9f0
[ 5.425100] __sys_sendto+0x58d/0x5a0
[ 5.425315] __x64_sys_sendto+0xda/0xf0
[ 5.425539] do_syscall_64+0x31/0x50
[ 5.425764] entry_SYSCALL_64_after_hwframe+0x61/0xc6
[ 5.426065]
[ 5.426157] The buggy address belongs to the object at
ffff88800e312200
[ 5.426157] which belongs to the cache kmalloc-128 of size 128
[ 5.426955] The buggy address is located 42 bytes to the right of
[ 5.426955] 128-byte region [
ffff88800e312200,
ffff88800e312280)
[ 5.427688] The buggy address belongs to the page:
[ 5.427992] page:
000000009875fabc refcount:1 mapcount:0
mapping:
0000000000000000 index:0x0 pfn:0xe312
[ 5.428562] flags: 0x100000000000200(slab)
[ 5.428812] raw:
0100000000000200 dead000000000100 dead000000000122
ffff888007843680
[ 5.429325] raw:
0000000000000000 0000000000100010 00000001ffffffff
ffff88800e312401
[ 5.429875] page dumped because: kasan: bad access detected
[ 5.430214] page->mem_cgroup:
ffff88800e312401
[ 5.430471]
[ 5.430564] Memory state around the buggy address:
[ 5.430846]
ffff88800e312180: fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc fc
[ 5.431267]
ffff88800e312200: 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 fc
[ 5.431705] >
ffff88800e312280: fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc fc
[ 5.432123] ^
[ 5.432391]
ffff88800e312300: 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 fc
[ 5.432810]
ffff88800e312380: fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc fc
[ 5.433229] ==================================================================
[ 5.433648] Disabling lock debugging due to kernel taint
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim [Sun, 1 Jan 2023 21:57:43 +0000 (16:57 -0500)]
net: sched: atm: dont intepret cls results when asked to drop
If asked to drop a packet via TC_ACT_SHOT it is unsafe to assume
res.class contains a valid pointer
Fixes:
b0188d4dbe5f ("[NET_SCHED]: sch_atm: Lindent")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Miaoqian Lin [Mon, 2 Jan 2023 08:20:39 +0000 (12:20 +0400)]
gpio: sifive: Fix refcount leak in sifive_gpio_probe
of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes:
96868dce644d ("gpio/sifive: Add GPIO driver for SiFive SoCs")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Linus Torvalds [Sun, 1 Jan 2023 21:53:16 +0000 (13:53 -0800)]
Linux 6.2-rc2
Linus Torvalds [Sun, 1 Jan 2023 19:27:00 +0000 (11:27 -0800)]
Merge tag 'perf_urgent_for_v6.2_rc2' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Pass only an initialized perf event attribute to the LSM hook
- Fix a use-after-free on the perf syscall's error path
- A potential integer overflow fix in amd_core_pmu_init()
- Fix the cgroup events tracking after the context handling rewrite
- Return the proper value from the inherit_event() function on error
* tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Call LSM hook after copying perf_event_attr
perf: Fix use-after-free in error path
perf/x86/amd: fix potential integer overflow on shift of a int
perf/core: Fix cgroup events tracking
perf core: Return error pointer if inherit_event() fails to find pmu_ctx
Linus Torvalds [Sun, 1 Jan 2023 19:19:50 +0000 (11:19 -0800)]
Merge tag 'x86_urgent_for_v6.2_rc2' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Two fixes to correct how kprobes handles INT3 now that they're added
by other functionality like the rethunks and not only kgdb
- Remove __init section markings of two functions which are referenced
by a function in the .text section
* tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
x86/calldepth: Fix incorrect init section references
Linus Torvalds [Sun, 1 Jan 2023 19:15:05 +0000 (11:15 -0800)]
Merge tag 'locking_urgent_for_v6.2_rc2' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Prevent the leaking of a debug timer in futex_waitv()
- A preempt-RT mutex locking fix, adding the proper acquire semantics
* tag 'locking_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Fix futex_waitv() hrtimer debug object leak on kcalloc error
rtmutex: Add acquire semantics for rtmutex lock acquisition slow path
Linus Torvalds [Sun, 1 Jan 2023 19:11:13 +0000 (11:11 -0800)]
Merge tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"I'm just back from the mountains, and Dave is out at the beach and
should be back in a week again. Just i915 fixes and since Rodrigo
bothered to make the pull last week I figured I should warm up gpg and
forward this in a nice signed tag as a new years present!
- i915 fixes for newer platforms
- i915 locking rework to not give up in vm eviction fallback path too
early"
* tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm:
drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index
drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence
drm/i915/uc: Fix two issues with over-size firmware files
drm/i915: improve the catch-all evict to handle lock contention
drm/i915: Remove __maybe_unused from mtl_info
drm/i915: fix TLB invalidation for Gen12.50 video and compute engines
Michał Grzelak [Thu, 29 Dec 2022 14:22:19 +0000 (15:22 +0100)]
dt-bindings: net: marvell,orion-mdio: Fix examples
As stated in marvell-orion-mdio.txt deleted in commit
0781434af811f
("dt-bindings: net: orion-mdio: Convert to JSON schema") if
'interrupts' property is present, width of 'reg' should be 0x84.
Otherwise, width of 'reg' should be 0x4. Fix 'examples:' and add
constraints checking whether 'interrupts' property is present
and validate it against fixed values in reg.
Signed-off-by: Michał Grzelak <mig@semihalf.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Samuel Holland [Sat, 31 Dec 2022 22:05:46 +0000 (16:05 -0600)]
dt-bindings: net: sun8i-emac: Add phy-supply property
This property has always been supported by the Linux driver; see
commit
9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i"). In fact, the
original driver submission includes the phy-supply code but no mention
of it in the binding, so the omission appears to be accidental. In
addition, the property is documented in the binding for the previous
hardware generation, allwinner,sun7i-a20-gmac.
Document phy-supply in the binding to fix devicetree validation for the
25+ boards that already use this property.
Fixes:
0441bde003be ("dt-bindings: net-next: Add DT bindings documentation for Allwinner dwmac-sun8i")
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Fri, 30 Dec 2022 22:33:04 +0000 (16:33 -0600)]
net: ipa: use proper endpoint mask for suspend
It is now possible for a system to have more than 32 endpoints. As
a result, registers related to endpoint suspend are parameterized,
with 32 endpoints represented in one more registers.
In ipa_interrupt_suspend_control(), the IPA_SUSPEND_EN register
offset is determined properly, but the bit mask used still assumes
the number of enpoints won't exceed 32. This is a bug. Fix it.
Fixes:
f298ba785e2d ("net: ipa: add a parameter to suspend registers")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 1 Jan 2023 11:59:53 +0000 (11:59 +0000)]
Merge branch 'selftests-fix'
Po-Hsu Lin says:
====================
selftests: net: fix for arp_ndisc_evict_nocarrier test
This patchset will fix a false-positive issue caused by the command in
cleanup_v6() of the arp_ndisc_evict_nocarrier test.
Also, it will make the test to return a non-zero value for any failure
reported in the test for us to avoid false-negative results.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Po-Hsu Lin [Fri, 30 Dec 2022 09:18:29 +0000 (17:18 +0800)]
selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
Return non-zero return value if there is any failure reported in this
script during the test. Otherwise it can only reflect the status of
the last command.
Fixes:
f86ca07eb531 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Po-Hsu Lin [Fri, 30 Dec 2022 09:18:28 +0000 (17:18 +0800)]
selftests: net: fix cleanup_v6() for arp_ndisc_evict_nocarrier
The cleanup_v6() will cause the arp_ndisc_evict_nocarrier script exit
with 255 (No such file or directory), even the tests are good:
# selftests: net: arp_ndisc_evict_nocarrier.sh
# run arp_evict_nocarrier=1 test
# RTNETLINK answers: File exists
# ok
# run arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run all.arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run ndisc_evict_nocarrier=1 test
# ok
# run ndisc_evict_nocarrier=0 test
# ok
# run all.ndisc_evict_nocarrier=0 test
# ok
not ok 1 selftests: net: arp_ndisc_evict_nocarrier.sh # exit=255
This is because it's trying to modify the parameter for ipv4 instead.
Also, tests for ipv6 (run_ndisc_evict_nocarrier_enabled() and
run_ndisc_evict_nocarrier_disabled() are working on veth1, reflect
this fact in cleanup_v6().
Fixes:
f86ca07eb531 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Anderson [Thu, 29 Dec 2022 20:21:20 +0000 (15:21 -0500)]
net: phy: Update documentation for get_rate_matching
Now that phylink no longer calls phy_get_rate_matching with
PHY_INTERFACE_MODE_NA, phys no longer need to support it. Remove the
documentation mandating support.
Fixes:
7642cc28fd37 ("net: phylink: fix PHY validation with rate adaption")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Vetter [Sun, 1 Jan 2023 10:52:11 +0000 (11:52 +0100)]
Merge tag 'drm-intel-fixes-2022-12-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- fix TLB invalidation for DG2 and newer platforms. (Andrzej)
- Remove __maybe_unused from mtl_info (Lucas)
- improve the catch-all evict to handle lock contention (Matt Auld)
- Fix two issues with over-size (GuC/HuC) firmware files (John)
- Fix DSI resume issues on ICL+ (Jani)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y662ijDHrZCjTFla@intel.com
David S. Miller [Sun, 1 Jan 2023 09:27:12 +0000 (09:27 +0000)]
Merge branch 'dsa-qca8k-fixes'
Christian Marangi says:
====================
net: dsa: qca8k: multiple fix on mdio read/write
Due to some problems in reading the Documentation and elaborating it
some wrong assumption were done. The error was reported and notice only
now due to how things are setup in the code flow.
First 2 patch fix mgmt eth where the lenght calculation is very
confusing and in step of word size. (the related commit description have
an extensive description about how this mess works)
Last 3 patch revert the broken mdio cache and apply a correct version
that should still save some extra mdio in phy poll secnario.
These 5 patch fix each related problem and apply what the Documentation
actually say.
Changes v2:
- Add cover letter
- Fix typo in revert patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Marangi [Thu, 29 Dec 2022 16:33:36 +0000 (17:33 +0100)]
net: dsa: qca8k: improve mdio master read/write by using single lo/hi
Improve mdio master read/write by using singe mii read/write lo/hi.
In a read and write we need to poll the mdio master regs in a busy loop
to check for a specific bit present in the upper half of the reg. We can
ignore the other half since it won't contain useful data. This will save
an additional useless read for each read and write operation.
In a read operation the returned data is present in the mdio master reg
lower half. We can ignore the other half since it won't contain useful
data. This will save an additional useless read for each read operation.
In a read operation it's needed to just set the hi half of the mdio
master reg as the lo half will be replaced by the result. This will save
an additional useless write for each read operation.
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Marangi [Thu, 29 Dec 2022 16:33:35 +0000 (17:33 +0100)]
net: dsa: qca8k: introduce single mii read/write lo/hi
It may be useful to read/write just the lo or hi half of a reg.
This is especially useful for phy poll with the use of mdio master.
The mdio master reg is composed by the first 16 bit related to setup and
the other half with the returned data or data to write.
Refactor the mii function to permit single mii read/write of lo or hi
half of the reg.
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Marangi [Thu, 29 Dec 2022 16:33:34 +0000 (17:33 +0100)]
Revert "net: dsa: qca8k: cache lo and hi for mdio write"
This reverts commit
2481d206fae7884cd07014fd1318e63af35e99eb.
The Documentation is very confusing about the topic.
The cache logic for hi and lo is wrong and actually miss some regs to be
actually written.
What the Documentation actually intended was that it's possible to skip
writing hi OR lo if half of the reg is not needed to be written or read.
Revert the change in favor of a better and correct implementation.
Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Marangi [Thu, 29 Dec 2022 16:33:33 +0000 (17:33 +0100)]
net: dsa: tag_qca: fix wrong MGMT_DATA2 size
It was discovered that MGMT_DATA2 can contain up to 28 bytes of data
instead of the 12 bytes written in the Documentation by accounting the
limit of 16 bytes declared in Documentation subtracting the first 4 byte
in the packet header.
Update the define with the real world value.
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes:
c2ee8181fddb ("net: dsa: tag_qca: add define for handling mgmt Ethernet packet")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Marangi [Thu, 29 Dec 2022 16:33:32 +0000 (17:33 +0100)]
net: dsa: qca8k: fix wrong length value for mgmt eth packet
The assumption that Documentation was right about how this value work was
wrong. It was discovered that the length value of the mgmt header is in
step of word size.
As an example to process 4 byte of data the correct length to set is 2.
To process 8 byte 4, 12 byte 6, 16 byte 8...
Odd values will always return the next size on the ack packet.
(length of 3 (6 byte) will always return 8 bytes of data)
This means that a value of 15 (0xf) actually means reading/writing 32 bytes
of data instead of 16 bytes. This behaviour is totally absent and not
documented in the switch Documentation.
In fact from Documentation the max value that mgmt eth can process is
16 byte of data while in reality it can process 32 bytes at once.
To handle this we always round up the length after deviding it for word
size. We check if the result is odd and we round another time to align
to what the switch will provide in the ack packet.
The workaround for the length limit of 15 is still needed as the length
reg max value is 0xf(15)
Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes:
90386223f44e ("net: dsa: qca8k: add support for larger read/write size with mgmt Ethernet")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 31 Dec 2022 18:21:47 +0000 (10:21 -0800)]
Merge tag 'kbuild-fixes-v6.2' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix broken BuildID
- Add srcrpm-pkg to the help message
- Fix the option order for modpost built with musl libc
- Fix the build dependency of rpm-pkg for openSUSE
* tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
fixdep: remove unneeded <stdarg.h> inclusion
kbuild: sort single-targets alphabetically again
kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires
kbuild: Fix running modpost with musl libc
kbuild: add a missing line for help message
.gitignore: ignore *.rpm
arch: fix broken BuildID for arm64 and riscv
kconfig: Add static text for search information in help menu
Linus Torvalds [Sat, 31 Dec 2022 18:01:44 +0000 (10:01 -0800)]
Merge tag 'ata-6.2-rc2' of git://git./linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
"A single fix to address an issue with wake from suspend with PCS
adapters, from Adam"
* tag 'ata-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: ahci: Fix PCS quirk application for suspend
Linus Torvalds [Fri, 30 Dec 2022 18:47:25 +0000 (10:47 -0800)]
Merge tag 'acpi-6.2-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These are new ACPI IRQ override quirks, low-power S0 idle (S0ix)
support adjustments and ACPI backlight handling fixes, mostly for
platforms using AMD chips.
Specifics:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent
non-operational ACPI backlight devices from being created on
systems where the native driver does not detect a suitable panel
(Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
- Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865
and stop using AMD-specific low-power S0 idle code path for systems
with Rembrandt chips and newer (Mario Limonciello)"
* tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+
ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865
ACPI: video: Fix Apple GMUX backlight detection
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
Linus Torvalds [Fri, 30 Dec 2022 18:30:54 +0000 (10:30 -0800)]
Merge tag 'sound-6.2-rc2' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few small fixes:
- A regression fix for HDMI audio on HD-audio AMD codecs
- Fixes for LINE6 MIDI handling
- HD-audio quirk for Dell laptops"
* tag 'sound-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecs
ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops
ALSA: line6: fix stack overflow in line6_midi_transmit
ALSA: line6: correct midi status byte when receiving data from podxt
Rafael J. Wysocki [Fri, 30 Dec 2022 15:59:10 +0000 (16:59 +0100)]
Merge branches 'acpi-resource' and 'acpi-video'
Merge ACPI resource handling quirks and ACPI backlight handling fixes
for 6.2-rc2:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent non-operational
ACPI backlight devices from being created on systems where the native
driver does not detect a suitable panel (Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
* acpi-resource:
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
* acpi-video:
ACPI: video: Fix Apple GMUX backlight detection
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
Cixi Geng [Thu, 29 Dec 2022 14:55:45 +0000 (22:55 +0800)]
gpio: sprd: Make the irqchip immutable
Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cixi Geng [Thu, 29 Dec 2022 14:55:44 +0000 (22:55 +0800)]
gpio: pmic-eic-sprd: Make the irqchip immutable
Remove the irq_chip from pmic_eic structure,
use the various calls by defining the statically
irq_chip structure.
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cixi Geng [Thu, 29 Dec 2022 14:55:43 +0000 (22:55 +0800)]
gpio: eic-sprd: Make the irqchip immutable
Remove the irq_chip from pmic_eic structure,
use the various calls by defining the statically
irq_chip structure.
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Haibo Chen [Sat, 10 Dec 2022 22:05:58 +0000 (00:05 +0200)]
gpio: pca953x: avoid to use uninitialized value pinctrl
There is a variable pinctrl declared without initializer. And then
has the case (switch operation chose the default case) to directly
use this uninitialized value, this is not a safe behavior. So here
initialize the pinctrl as 0 to avoid this issue.
This is reported by Coverity.
Fixes:
13c5d4ce8060 ("gpio: pca953x: Add support for PCAL6534")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Hans de Goede [Thu, 29 Dec 2022 16:45:01 +0000 (17:45 +0100)]
gpiolib: Fix using uninitialized lookup-flags on ACPI platforms
Commit
8eb1f71e7acc ("gpiolib: consolidate GPIO lookups") refactors
fwnode_get_named_gpiod() and gpiod_get_index() into a unified
gpiod_find_and_request() helper.
The old functions both initialized their local lookupflags variable to
GPIO_LOOKUP_FLAGS_DEFAULT, but the new code leaves it uninitialized.
This is a problem for at least ACPI platforms, where acpi_find_gpio()
only does a bunch of *lookupflags |= GPIO_* statements and thus relies
on the variable being initialized.
The variable not being initialized leads to:
1. Potentially the wrong flags getting used
2. The check for conflicting lookup flags in gpiod_configure_flags():
"multiple pull-up, pull-down or pull-disable enabled, invalid config"
sometimes triggering, making the GPIO unavailable
Restore the initialization of lookupflags to GPIO_LOOKUP_FLAGS_DEFAULT
to fix this.
Fixes:
8eb1f71e7acc ("gpiolib: consolidate GPIO lookups")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Jani Nikula [Tue, 20 Dec 2022 14:01:05 +0000 (16:01 +0200)]
drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index
Due to copy-paste fail, MIPI_BKLT_EN_1 would always use PPS index 1,
never 0. Fix the sloppiest commit in recent memory.
Fixes:
963bbdb32b47 ("drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221220140105.313333-1-jani.nikula@intel.com
(cherry picked from commit
a561933c571798868b5fa42198427a7e6df56c09)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Jani Nikula [Mon, 19 Dec 2022 10:59:55 +0000 (12:59 +0200)]
drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence
Starting from ICL, the default for MIPI GPIO sequences seems to be using
native GPIOs i.e. GPIOs available in the GPU. These native GPIOs reuse
many pins that quite frankly seem scary to poke based on the VBT
sequences. We pretty much have to trust that the board is configured
such that the relevant HPD, PP_CONTROL and GPIO bits aren't used for
anything else.
MIPI sequence v4 also adds a flag to fall back to non-native sequences.
v5:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock() in icp_irq_handler()
too (Ville)
- References instead of Closes issue 6131 because this does not fix everything
v4:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock_irq() (Ville)
v3:
- Fix -Wbitwise-conditional-parentheses (kernel test robot <lkp@intel.com>)
v2:
- Fix HPD pin output set (impacts GPIOs 0 and 5)
- Fix GPIO data output direction set (impacts GPIOs 4 and 9)
- Reduce register accesses to single intel_de_rwm()
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6131
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219105955.4014451-1-jani.nikula@intel.com
(cherry picked from commit
f087cfe6fcff58044f7aa3b284965af47f472fb0)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Masahiro Yamada [Fri, 30 Dec 2022 08:16:42 +0000 (17:16 +0900)]
fixdep: remove unneeded <stdarg.h> inclusion
This is unneeded since commit
69304379ff03 ("fixdep: use fflush() and
ferror() to ensure successful write to files").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Thu, 29 Dec 2022 12:16:42 +0000 (21:16 +0900)]
kbuild: sort single-targets alphabetically again
This was previously alphabetically sorted. Sort it again.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Masahiro Yamada [Wed, 28 Dec 2022 19:10:14 +0000 (04:10 +0900)]
kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires
Guoqing Jiang reports that openSUSE cannot compile the kernel rpm due
to "BuildRequires: elfutils-libelf-devel" added by commit
8818039f959b
("kbuild: add ability to make source rpm buildable using koji").
The relevant package name in openSUSE is libelf-devel.
Add it as an alternative package.
BTW, if it is impossible to solve the build requirement, the final
resort would be:
$ make RPMOPTS=--nodeps rpm-pkg
This passes --nodeps to the rpmbuild command so it will not verify
build dependencies. This is useful to test rpm builds on non-rpm
system. On Debian/Ubuntu, for example, you can install rpmbuild by
'apt-get install rpm'.
NOTE1:
Likewise, it is possible to bypass the build dependency check for
debian package builds:
$ make DPKG_FLAGS=-d deb-pkg
NOTE2:
The 'or' operator is supported since RPM 4.13. So, old distros such
as CentOS 7 will break. I suggest installing newer rpmbuild in such
cases.
Link: https://lore.kernel.org/linux-kbuild/ee227d24-9c94-bfa3-166a-4ee6b5dfea09@linux.dev/T/#u
Fixes:
8818039f959b ("kbuild: add ability to make source rpm buildable using koji")
Reported-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Samuel Holland [Tue, 27 Dec 2022 21:48:21 +0000 (15:48 -0600)]
kbuild: Fix running modpost with musl libc
commit
3d57e1b7b1d4 ("kbuild: refactor the prerequisites of the modpost
rule") moved 'vmlinux.o' inside modpost-args, possibly before some of
the other options. However, getopt() in musl libc follows POSIX and
stops looking for options upon reaching the first non-option argument.
As a result, the '-T' option is misinterpreted as a positional argument,
and the build fails:
make -f ./scripts/Makefile.modpost
scripts/mod/modpost -E -o Module.symvers vmlinux.o -T modules.order
-T: No such file or directory
make[1]: *** [scripts/Makefile.modpost:137: Module.symvers] Error 1
make: *** [Makefile:1960: modpost] Error 2
The fix is to move all options before 'vmlinux.o' in modpost-args.
Fixes:
3d57e1b7b1d4 ("kbuild: refactor the prerequisites of the modpost rule")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Jun ASAKA [Tue, 27 Dec 2022 09:21:57 +0000 (17:21 +0800)]
kbuild: add a missing line for help message
The help message line for building the source RPM package was missing.
Added it.
Signed-off-by: Jun ASAKA <JunASAKA@zzy040330.moe>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 26 Dec 2022 18:54:44 +0000 (03:54 +0900)]
.gitignore: ignore *.rpm
Previously, *.rpm files were created under $HOME/rpmbuild/, but since
commit
8818039f959b ("kbuild: add ability to make source rpm buildable
using koji"), srcrpm-pkg creates the source rpm in the kernel tree
because it sets '_srcrpmdir'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 26 Dec 2022 18:45:37 +0000 (03:45 +0900)]
arch: fix broken BuildID for arm64 and riscv
Dennis Gilmore reports that the BuildID is missing in the arm64 vmlinux
since commit
994b7ac1697b ("arm64: remove special treatment for the
link order of head.o").
The issue is that the type of .notes section, which contains the BuildID,
changed from NOTES to PROGBITS.
Ard Biesheuvel figured out that whichever object gets linked first gets
to decide the type of a section. The PROGBITS type is the result of the
compiler emitting .note.GNU-stack as PROGBITS rather than NOTE.
While Ard provided a fix for arm64, I want to fix this globally because
the same issue is happening on riscv since commit
2348e6bf4421 ("riscv:
remove special treatment for the link order of head.o"). This problem
will happen in general for other architectures if they start to drop
unneeded entries from scripts/head-object-list.txt.
Discard .note.GNU-stack in include/asm-generic/vmlinux.lds.h.
Link: https://lore.kernel.org/lkml/CAABkxwuQoz1CTbyb57n0ZX65eSYiTonFCU8-LCQc=74D=xE=rA@mail.gmail.com/
Fixes:
994b7ac1697b ("arm64: remove special treatment for the link order of head.o")
Fixes:
2348e6bf4421 ("riscv: remove special treatment for the link order of head.o")
Reported-by: Dennis Gilmore <dennis@ausil.us>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
John Harrison [Wed, 21 Dec 2022 19:30:31 +0000 (11:30 -0800)]
drm/i915/uc: Fix two issues with over-size firmware files
In the case where a firmware file is too large (e.g. someone
downloaded a web page ASCII dump from github...), the firmware object
is released but the pointer is not zerod. If no other firmware file
was found then release would be called again leading to a double kfree.
Also, the size check was only being applied to the initial firmware
load not any of the subsequent attempts. So move the check into a
wrapper that is used for all loads.
Fixes:
016241168dc5 ("drm/i915/uc: use different ggtt pin offsets for uc loads")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221221193031.687266-4-John.C.Harrison@Intel.com
(cherry picked from commit
4071d98b296a5bc5fd4b15ec651bd05800ec9510)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Matthew Auld [Fri, 16 Dec 2022 11:34:56 +0000 (11:34 +0000)]
drm/i915: improve the catch-all evict to handle lock contention
The catch-all evict can fail due to object lock contention, since it
only goes as far as trylocking the object, due to us already holding the
vm->mutex. Doing a full object lock here can deadlock, since the
vm->mutex is always our inner lock. Add another execbuf pass which drops
the vm->mutex and then tries to grab the object will the full lock,
before then retrying the eviction. This should be good enough for now to
fix the immediate regression with userspace seeing -ENOSPC from execbuf
due to contended object locks during GTT eviction.
v2 (Mani)
- Also revamp the docs for the different passes.
Testcase: igt@gem_ppgtt@shrink-vs-evict-*
Fixes:
7e00897be8bf ("drm/i915: Add object locking to i915_gem_evict_for_node and i915_gem_evict_something, v2.")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7627
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7570
References: https://bugzilla.mozilla.org/show_bug.cgi?id=1779558
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Mani Milani <mani@chromium.org>
Cc: <stable@vger.kernel.org> # v5.18+
Reviewed-by: Mani Milani <mani@chromium.org>
Tested-by: Mani Milani <mani@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216113456.414183-1-matthew.auld@intel.com
(cherry picked from commit
801fa7a81f6da533cc5442fc40e32c72b76cd42a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Lucas De Marchi [Wed, 14 Dec 2022 19:49:44 +0000 (11:49 -0800)]
drm/i915: Remove __maybe_unused from mtl_info
The attribute __maybe_unused should remain only until the respective
info is not in the pciidlist. The info can't be added together
with its definition because that would cause the driver to automatically
probe for the device, while it's still not ready for that. However once
pciidlist contains it, the attribute can be removed.
Fixes:
7835303982d1 ("drm/i915/mtl: Add MeteorLake PCI IDs")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214194944.3670344-1-lucas.demarchi@intel.com
(cherry picked from commit
50490ce05b7a50b0bd4108fa7d6db3ca2972fa83)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Andrzej Hajda [Wed, 14 Dec 2022 07:54:39 +0000 (08:54 +0100)]
drm/i915: fix TLB invalidation for Gen12.50 video and compute engines
In case of Gen12.50 video and compute engines, TLB_INV registers are
masked - to modify one bit, corresponding bit in upper half of the register
must be enabled, otherwise nothing happens.
Fixes:
77fa9efc16a9 ("drm/i915/xehp: Create separate reg definitions for new MCR registers")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214075439.402485-1-andrzej.hajda@intel.com
(cherry picked from commit
4d5cf7b1680a1e6db327e3c935ef58325cbedb2c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Miaoqian Lin [Thu, 29 Dec 2022 06:29:25 +0000 (10:29 +0400)]
net: phy: xgmiitorgmii: Fix refcount leak in xgmiitorgmii_probe
of_phy_find_device() return device node with refcount incremented.
Call put_device() to relese it when not needed anymore.
Fixes:
ab4e6ee578e8 ("net: phy: xgmiitorgmii: Check phy_driver ready before accessing")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 30 Dec 2022 07:43:44 +0000 (07:43 +0000)]
Merge branch 'ena-fixes'
David Arinzon says:
====================
ENA driver bug fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Arinzon [Thu, 29 Dec 2022 07:30:11 +0000 (07:30 +0000)]
net: ena: Update NUMA TPH hint register upon NUMA node update
The device supports a PCIe optimization hint, which indicates on
which NUMA the queue is currently processed. This hint is utilized
by PCIe in order to reduce its access time by accessing the
correct NUMA resources and maintaining cache coherence.
The driver calls the register update for the hint (called TPH -
TLP Processing Hint) during the NAPI loop.
Though the update is expected upon a NUMA change (when a queue
is moved from one NUMA to the other), the current logic performs
a register update when the queue is moved to a different CPU,
but the CPU is not necessarily in a different NUMA.
The changes include:
1. Performing the TPH update only when the queue has switched
a NUMA node.
2. Moving the TPH update call to be triggered only when NAPI was
scheduled from interrupt context, as opposed to a busy-polling loop.
This is due to the fact that during busy-polling, the frequency
of CPU switches for a particular queue is significantly higher,
thus, the likelihood to switch NUMA is much higher. Therefore,
providing the frequent updates to the device upon a NUMA update
are unlikely to be beneficial.
Fixes:
1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Arinzon [Thu, 29 Dec 2022 07:30:10 +0000 (07:30 +0000)]
net: ena: Set default value for RX interrupt moderation
RX ring can be NULL in XDP use cases where only TX queues
are configured. In this scenario, the RX interrupt moderation
value sent to the device remains in its default value of 0.
In this change, setting the default value of the RX interrupt
moderation to be the same as of the TX.
Fixes:
548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Arinzon [Thu, 29 Dec 2022 07:30:09 +0000 (07:30 +0000)]
net: ena: Fix rx_copybreak value update
Make the upper bound on rx_copybreak tighter, by
making sure it is smaller than the minimum of mtu and
ENA_PAGE_SIZE. With the current upper bound of mtu,
rx_copybreak can be larger than a page. Such large
rx_copybreak will not bring any performance benefit to
the user and therefore makes no sense.
In addition, the value update was only reflected in
the adapter structure, but not applied for each ring,
causing it to not take effect.
Fixes:
1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Osama Abboud <osamaabb@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Arinzon [Thu, 29 Dec 2022 07:30:08 +0000 (07:30 +0000)]
net: ena: Use bitmask to indicate packet redirection
Redirecting packets with XDP Redirect is done in two phases:
1. A packet is passed by the driver to the kernel using
xdp_do_redirect().
2. After finishing polling for new packets the driver lets the kernel
know that it can now process the redirected packet using
xdp_do_flush_map().
The packets' redirection is handled in the napi context of the
queue that called xdp_do_redirect()
To avoid calling xdp_do_flush_map() each time the driver first checks
whether any packets were redirected, using
xdp_flags |= xdp_verdict;
and
if (xdp_flags & XDP_REDIRECT)
xdp_do_flush_map()
essentially treating XDP instructions as a bitmask, which isn't the case:
enum xdp_action {
XDP_ABORTED = 0,
XDP_DROP,
XDP_PASS,
XDP_TX,
XDP_REDIRECT,
};
Given the current possible values of xdp_action, the current design
doesn't have a bug (since XDP_REDIRECT = 100b), but it is still
flawed.
This patch makes the driver use a bitmask instead, to avoid future
issues.
Fixes:
a318c70ad152 ("net: ena: introduce XDP redirect implementation")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Arinzon [Thu, 29 Dec 2022 07:30:07 +0000 (07:30 +0000)]
net: ena: Account for the number of processed bytes in XDP
The size of packets that were forwarded or dropped by XDP wasn't added
to the total processed bytes statistic.
Fixes:
548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Arinzon [Thu, 29 Dec 2022 07:30:06 +0000 (07:30 +0000)]
net: ena: Don't register memory info on XDP exchange
Since the queues aren't destroyed when we only exchange XDP programs,
there's no need to re-register them again.
Fixes:
548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Arinzon [Thu, 29 Dec 2022 07:30:05 +0000 (07:30 +0000)]
net: ena: Fix toeplitz initial hash value
On driver initialization, RSS hash initial value is set to zero,
instead of the default value. This happens because we pass NULL as
the RSS key parameter, which caused us to never initialize
the RSS hash value.
This patch fixes it by making sure the initial value is set, no matter
what the value of the RSS key is.
Fixes:
91a65b7d3ed8 ("net: ena: fix potential crash when rxfh key is NULL")
Signed-off-by: Nati Koler <nkoler@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Po-Hsu Lin [Thu, 29 Dec 2022 05:41:06 +0000 (13:41 +0800)]
selftests: net: fix cmsg_so_mark.sh test hang
This cmsg_so_mark.sh test will hang on non-amd64 systems because of the
infinity loop for argument parsing in cmsg_sender.
Variable "o" in cs_parse_args() for taking getopt() should be an int,
otherwise it will be 255 when getopt() returns -1 on non-amd64 system
and thus causing infinity loop.
Link: https://lore.kernel.org/lkml/CA+G9fYsM2k7mrF7W4V_TrZ-qDauWM394=8yEJ=-t1oUg8_40YA@mail.gmail.com/t/
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 30 Dec 2022 07:33:55 +0000 (07:33 +0000)]
Merge tag 'mlx5-fixes-2022-12-28' of git://git./linux/kernel/git/saeed/linux
mlx5-fixes-2022-12-28
Jiguang Xiao [Wed, 28 Dec 2022 08:14:47 +0000 (16:14 +0800)]
net: amd-xgbe: add missed tasklet_kill
The driver does not call tasklet_kill in several places.
Add the calls to fix it.
Fixes:
85b85c853401 ("amd-xgbe: Re-issue interrupt if interrupt status not cleared")
Signed-off-by: Jiguang Xiao <jiguang.xiao@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Wed, 28 Dec 2022 06:27:49 +0000 (14:27 +0800)]
net: hns3: refine the handling for VF heartbeat
Currently, the PF check the VF alive by the KEEP_ALVE
mailbox from VF. VF keep sending the mailbox per 2
seconds. Once PF lost the mailbox for more than 8
seconds, it will regards the VF is abnormal, and stop
notifying the state change to VF, include link state,
vf mac, reset, even though it receives the KEEP_ALIVE
mailbox again. It's inreasonable.
This patch fixes it. PF will record the state change which
need to notify VF when lost the VF's KEEP_ALIVE mailbox.
And notify VF when receive the mailbox again. Introduce a
new flag HCLGE_VPORT_STATE_INITED, used to distinguish the
case whether VF driver loaded or not. For VF will query
these states when initializing, so it's unnecessary to
notify it in this case.
Fixes:
aa5c4f175be6 ("net: hns3: add reset handling for VF when doing PF reset")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Uwe Kleine-König [Tue, 27 Dec 2022 21:45:08 +0000 (22:45 +0100)]
net: ethernet: freescale: enetc: Drop empty platform remove function
A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Uwe Kleine-König [Tue, 27 Dec 2022 21:45:07 +0000 (22:45 +0100)]
net: ethernet: broadcom: bcm63xx_enet: Drop empty platform remove function
A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 30 Dec 2022 07:25:53 +0000 (07:25 +0000)]
Merge branch 'tcp-bhash2-fixes'
Kuniyuki Iwashima says:
===================
tcp: Fix bhash2 and TIME_WAIT regression.
We forgot to add twsk to bhash2. Therefore TIME_WAIT sockets cannot
prevent bind() to the same local address and port.
Changes:
v1:
* Patch 1:
* Add tw_bind2_node in inet_timewait_sock instead of
moving sk_bind2_node from struct sock to struct
sock_common.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / platform / kernel / linux-starfive.git / log