Olof Johansson [Mon, 4 Nov 2019 01:19:26 +0000 (17:19 -0800)]
Merge tag 'tegra-for-5.5-dt-bindings' of git://git./linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v5.5-rc1
This contains various updates to device tree bindings and includes that
are related to driver changes in other Tegra branches.
* tag 'tegra-for-5.5-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: memory: Add binding for NVIDIA Tegra30 External Memory Controller
dt-bindings: memory: Add binding for NVIDIA Tegra30 Memory Controller
dt-bindings: memory: tegra30: Convert to Tegra124 YAML
dt-bindings: regulator: Document regulators coupling of NVIDIA Tegra20/30 SoCs
dt-bindings: clock: tegra: Rename SOR0_LVDS to SOR0_OUT
Link: https://lore.kernel.org/r/20191102144521.3863321-1-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 4 Nov 2019 01:07:51 +0000 (17:07 -0800)]
Merge tag 'sunxi-dt-for-5.5-1' of https://git./linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of DT patches, with this time mostly:
- Mali GPU support for the H6
- Two new crypto drivers enablement
- A few fixes to our DTs, fixed through the validation effort
- New boards: NanoPi Duo2
* tag 'sunxi-dt-for-5.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (22 commits)
dt-bindings: arm: sunxi: add FriendlyARM NanoPi Duo2
ARM: dts: sun8i: add FriendlyARM NanoPi Duo2
arm64: allwinner: h6: Enable GPU node for Tanix TX6
arm64: dts: allwinner: bluetooth for Emlid Neutis N5
ARM: dts: sunxi: h3/h5: add missing uart2 rts/cts pins
ARM: dts: sun9i: a80: Add Security System node
ARM: dts: sun8i: a83t: Add Security System node
arm64: dts: allwinner: sun50i: Add Crypto Engine node on H6
arm64: dts: allwinner: sun50i: Add crypto engine node on H5
arm64: dts: allwinner: sun50i: Add Crypto Engine node on A64
ARM: dts: sun8i: H3: Add Crypto Engine node
ARM: dts: sun8i: R40: add crypto engine node
dt-bindings: crypto: Add DT bindings documentation for sun8i-ce Crypto Engine
arm64: dts: allwinner: Add mali GPU supply for H6 boards
arm64: dts: allwinner: Add ARM Mali GPU node for H6
ARM: dts: sun8i: a83t: a711: Add touchscreen node
ARM: dts: sun5i: olinuxino micro: Fix AT24 node name
ARM: dts: sun9i: Add missing watchdog clocks
arm64: dts: sun50i: sopine-baseboard: Expose serial1, serial2 and serial3
arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth
...
Link: https://lore.kernel.org/r/1bf18c83-f41d-4353-9ca2-9585b8693df2.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
Geert Uytterhoeven [Fri, 1 Nov 2019 16:03:56 +0000 (17:03 +0100)]
ARM: dts: atlas7: Fix "debounce-interval" property misspelling
"debounce_interval" was never supported.
Link: https://lore.kernel.org/r/20191101160356.32034-3-geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Geert Uytterhoeven [Fri, 1 Nov 2019 16:03:55 +0000 (17:03 +0100)]
arm64: dts: lg1313: DT fix s/#interrupts-cells/#interrupt-cells/
The standard DT property is called "#interrupt-cells".
Link: https://lore.kernel.org/r/20191101160356.32034-2-geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Geert Uytterhoeven [Fri, 1 Nov 2019 16:03:54 +0000 (17:03 +0100)]
arm64: dts: lg1312: DT fix s/#interrupts-cells/#interrupt-cells/
The standard DT property is called "#interrupt-cells".
Link: https://lore.kernel.org/r/20191101160356.32034-1-geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 4 Nov 2019 01:06:10 +0000 (17:06 -0800)]
Merge tag 'renesas-dt-bindings-for-v5.5-tag2' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v5.5 (take two)
- JSON schema conversion,
- Core support for the new R-Car M3-W+ (r8a77961) SoC,
- Board compatible updates.
* tag 'renesas-dt-bindings-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: power: rcar-sysc: Document r8a77961 support
dt-bindings: reset: rcar-rst: Document r8a77961 support
dt-bindings: arm: renesas: Add Salvator-XS board with R-Car M3-W+
dt-bindings: arm: renesas: Document R-Car M3-W+ SoC DT bindings
dt-bindings: arm: renesas: Add R-Car M3-N ULCB with Kingfisher
dt-bindings: arm: renesas: Convert 'renesas,prr' to json-schema
Link: https://lore.kernel.org/r/20191101155842.31467-7-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 4 Nov 2019 01:05:18 +0000 (17:05 -0800)]
Merge tag 'renesas-arm64-dt-for-v5.5-tag2' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM64 DT updates for v5.5 (take two)
- Video-Input and Serial-ATA support on RZ/G2N,
- Color Management Module support on various R-Car Gen3 SoCs,
- Initial support for the R-Car M3-W+ (r8a77961) SoC on the
Salvator-XS board.
* tag 'renesas-arm64-dt-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+
arm64: dts: renesas: Add Renesas R8A77961 SoC support
arm64: dts: renesas: Prepare for rename of ARCH_R8A7796 to ARCH_R8A77960
dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions
dt-bindings: power: Add r8a77961 SYSC power domain definitions
arm64: dts: renesas: r8a774b1: Add SATA controller node
arm64: dts: renesas: rcar-gen3: Add CMM units
arm64: dts: renesas: r8a774b1: Add VIN and CSI-2 support
Link: https://lore.kernel.org/r/20191101155842.31467-5-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 4 Nov 2019 01:02:06 +0000 (17:02 -0800)]
Merge tag 'omap-for-v5.5/prm-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/dt
PRM reset control dts changes for v5.5 merge window
This series of changes adds the PRM reset driver nodes for am3/4, omap4/5
and dra7 SoCs. The reset driver changes make it easier to add support for
various accelerators for TI SoCs in a more generic way.
Note that this branch is based on the PRM reset driver changes branch.
* tag 'omap-for-v5.5/prm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap5: Add PRM data
ARM: dts: am43xx: Add PRM data
ARM: dts: am33xx: Add PRM data
ARM: dts: omap4: add PRM nodes
ARM: dts: dra7: add PRM nodes
soc: ti: omap-prm: add omap5 PRM data
soc: ti: omap-prm: add am4 PRM data
soc: ti: omap-prm: add dra7 PRM data
soc: ti: omap-prm: add data for am33xx
soc: ti: omap-prm: add omap4 PRM data
soc: ti: omap-prm: add support for denying idle for reset clockdomain
soc: ti: omap-prm: poll for reset complete during de-assert
soc: ti: add initial PRM driver with reset control support
dt-bindings: omap: add new binding for PRM instances
Link: https://lore.kernel.org/r/pull-1572623173-281197@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Thu, 31 Oct 2019 16:34:55 +0000 (17:34 +0100)]
ARM: dts: mmp3-dell-ariel: Add a serial point alias
Make sure UART3, where the console is, is called ttyS2. That is
consistent with the early console.
Link: https://lore.kernel.org/r/20191031163455.1711872-5-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Thu, 31 Oct 2019 16:34:54 +0000 (17:34 +0100)]
ARM: dts: mmp3-dell-ariel: Add a name to /memory node
Ponted out by DTC:
<stdout>: Warning (unit_address_vs_reg): /memory: node has a reg or ranges
property, but no unit name
Link: https://lore.kernel.org/r/20191031163455.1711872-4-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Thu, 31 Oct 2019 16:34:53 +0000 (17:34 +0100)]
ARM: dts: mmp3: Fix /soc/watchdog node name
There's a typo there that rightfully upsets DTS:
<stdout>: Warning (simple_bus_reg): /soc/watchdog@
2c000620: simple-bus
unit address format error, expected "
e0000620"
Link: https://lore.kernel.org/r/20191031163455.1711872-3-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Thu, 31 Oct 2019 16:34:52 +0000 (17:34 +0100)]
ARM: dts: mmp3: Add a name to /clocks node
It should have one and DTC is indeed unhappy about its absence:
<stdout>: Warning (unit_address_vs_reg): /soc/clocks: node has a reg or
ranges property, but no unit name
Link: https://lore.kernel.org/r/20191031163455.1711872-2-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
Manivannan Sadhasivam [Wed, 30 Oct 2019 10:11:54 +0000 (15:41 +0530)]
ARM: dts: Add RDA8810PL GPIO controllers
Add GPIO controllers for RDA8810PL SoC. There are 4 GPIO controllers
in this SoC with maximum of 32 gpios. Except GPIOC, all controllers
are capable of generating edge/level interrupts from first 8 lines.
Link: https://lore.kernel.org/r/20191030101154.6312-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 4 Nov 2019 00:56:23 +0000 (16:56 -0800)]
Merge tag 'hisi-arm64-dt-for-5.5' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon SoCs DT updates for 5.5
- add Mali450 MP4 GPU node in the hi6220 SoC
* tag 'hisi-arm64-dt-for-5.5' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: Add Mali-450 MP4 GPU DT entry
Link: https://lore.kernel.org/r/5DB95AAB.8060405@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 4 Nov 2019 00:54:32 +0000 (16:54 -0800)]
Merge tag 'realtek-arm64-dt-for-5.5' of git://git./linux/kernel/git/afaerber/linux-realtek into arm/dt
Realtek ARM64 based SoC DT for v5.5
Add RTD1293 and RTD1296 DTs. Add the watchdog for all of RTD129x DTs.
Add reset controllers for RTD129x and start using them for UARTs.
* tag 'realtek-arm64-dt-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek:
arm64: dts: realtek: Add RTD129x UART resets
arm64: dts: realtek: Add RTD129x reset controller nodes
dt-bindings: reset: Add Realtek RTD1295
arm64: dts: realtek: Add watchdog node for RTD129x
arm64: dts: realtek: Add oscillator for RTD129x
arm64: dts: realtek: Add RTD1296 and Synology DS418
dt-bindings: arm: realtek: Document RTD1296 and Synology DS418
arm64: dts: realtek: Add RTD1293 and Synology DS418j
arm64: dts: realtek: Change dual-license from MIT to BSD
dt-bindings: arm: realtek: Document RTD1293 and Synology DS418j
dt-bindings: arm: realtek: Tidy up conversion to json-schema
Link: https://lore.kernel.org/r/20191030041000.31848-2-afaerber@suse.de
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 4 Nov 2019 00:53:37 +0000 (16:53 -0800)]
Merge branch 'for_5.5/keystone-dts' of git://git./linux/kernel/git/ssantosh/linux-keystone into arm/dt
* 'for_5.5/keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: configs: keystone: enable cpts
ARM: dts: k2l-netcp: add cpts refclk_mux node
ARM: dts: k2hk-netcp: add cpts refclk_mux node
ARM: dts: k2e-netcp: add cpts refclk_mux node
ARM: dts: k2e-clocks: add input ext. fixed clocks tsipclka/b
ARM: dts: keystone-clocks: add input fixed clocks
Link: https://lore.kernel.org/r/1572372856-20598-2-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 2 Nov 2019 20:34:24 +0000 (13:34 -0700)]
Merge tag 'socfpga_dts_updates_for_v5.5' of git://git./linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA DTS updates for v5.5
- Arria10
- modify QSPI read-delay property
- Agilex
- Add QSPI support
- Enable USB and LEDs
- Add service layer, fpga manager support
- Stratix10
- Update QSPI reg address
* tag 'socfpga_dts_updates_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: agilex: add service layer, fpga manager and fpga region
arm64: agilex: enable USB and LEDs on agilex devkit
arm64: dts: altera: update QSPI reg addresses for Stratix10
arm64: dts: agilex: add QSPI support for Intel Agilex
ARM: dts: arria10: Modify QSPI read_delay for Arria10
Link: https://lore.kernel.org/r/20191029143737.24850-1-dinguyen@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Karl Palsson [Fri, 1 Nov 2019 20:55:36 +0000 (20:55 +0000)]
dt-bindings: arm: sunxi: add FriendlyARM NanoPi Duo2
Adds bindings for the newly added NanoPi Duo2 board.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Karl Palsson [Fri, 1 Nov 2019 20:55:35 +0000 (20:55 +0000)]
ARM: dts: sun8i: add FriendlyARM NanoPi Duo2
This is an Allwinner H3 based board, with 512MB ram, a USB OTG port,
microsd slot, an onboard AP6212A wifi/bluetooth module, and a CSI
connector.
Full details and schematic available from vendor:
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_Duo2
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Clément Péron [Sat, 2 Nov 2019 12:04:27 +0000 (13:04 +0100)]
arm64: allwinner: h6: Enable GPU node for Tanix TX6
Unlike other H6 boards, Tanix TX6 doesn't have a PMIC so we can enable
the GPU without providing a specific power supply.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Geert Uytterhoeven [Wed, 23 Oct 2019 12:33:40 +0000 (14:33 +0200)]
arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+
Add initial support for the Renesas Salvator-X 2nd version development
board equipped with an R-Car M3-W+ SiP with 8 (2 x 4) GiB of RAM.
The memory map is as follows:
- Bank0: 4GiB RAM : 0x000048000000 -> 0x000bfffffff
0x000480000000 -> 0x004ffffffff
- Bank1: 4GiB RAM : 0x000600000000 -> 0x006ffffffff
Based on a patch in the BSP by Takeshi Kihara
<takeshi.kihara.df@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-10-geert+renesas@glider.be
Geert Uytterhoeven [Wed, 23 Oct 2019 12:33:39 +0000 (14:33 +0200)]
arm64: dts: renesas: Add Renesas R8A77961 SoC support
Add initial support for the Renesas R-Car M3-W+ (R8A77961) SoC.
This includes:
- Cortex-A57 and Cortex-A53 CPU cores
(incl. L2 caches and power state definitions),
- Power Management Unit,
- PSCI firmware,
- Pin Function Controller,
- Clock, Reset, System, and Interrupt Controllers,
- SCIF2 serial console,
- Product Register,
- ARM Architectured Timer,
and various placeholders to allow to use salvator-xs.dtsi.
Based on r8a7796.dtsi.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-9-geert+renesas@glider.be
Geert Uytterhoeven [Wed, 23 Oct 2019 12:33:38 +0000 (14:33 +0200)]
arm64: dts: renesas: Prepare for rename of ARCH_R8A7796 to ARCH_R8A77960
CONFIG_ARCH_R8A7796 for R-Car M3-W (R8A77960) will be renamed to
CONFIG_ARCH_R8A77960, to avoid confusion with R-Car M3-W+ (R8A77961),
which will use CONFIG_ARCH_R8A77961.
Relax dependencies by handling both symbols.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-8-geert+renesas@glider.be
Geert Uytterhoeven [Fri, 1 Nov 2019 13:03:03 +0000 (14:03 +0100)]
Merge tag 'renesas-r8a77961-dt-binding-defs-tag' into renesas-arm64-dt-for-v5.5
Renesas R-Car M3-W+ DT Binding Definitions
Clock and Power Domain definitions for the Renesas R-Car M3-W+
(R8A77961) SoC, shared by driver and DT source files.
Geert Uytterhoeven [Wed, 23 Oct 2019 12:29:10 +0000 (14:29 +0200)]
dt-bindings: power: rcar-sysc: Document r8a77961 support
Add DT binding documentation for the System Controller in the Renesas
R-Car M3-W+ (R8A77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191023122911.12166-5-geert+renesas@glider.be
Geert Uytterhoeven [Wed, 23 Oct 2019 12:29:09 +0000 (14:29 +0200)]
dt-bindings: reset: rcar-rst: Document r8a77961 support
Add DT binding documentation for the Reset block in the Renesas R-Car
M3-W+ (R8A77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191023122911.12166-4-geert+renesas@glider.be
Geert Uytterhoeven [Wed, 23 Oct 2019 12:29:08 +0000 (14:29 +0200)]
dt-bindings: arm: renesas: Add Salvator-XS board with R-Car M3-W+
Add device tree binding documentation for the Renesas Salvator-XS board
equipped with an R-Car M3-W+ (R8A77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20191023122911.12166-3-geert+renesas@glider.be
Geert Uytterhoeven [Wed, 23 Oct 2019 12:29:07 +0000 (14:29 +0200)]
dt-bindings: arm: renesas: Document R-Car M3-W+ SoC DT bindings
Add device tree binding documentation for the Renesas R-Car M3-W+
(R8A77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20191023122911.12166-2-geert+renesas@glider.be
Geert Uytterhoeven [Wed, 23 Oct 2019 12:29:39 +0000 (14:29 +0200)]
dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions
Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car
M3-W+ (R8A77961) SoC, as listed in Table 8.2b ("List of Clocks [R-Car
M3-W/R-Car M3-W+]") of the R-Car Series, 3rd Generation Hardware User's
Manual (Rev. 2.00, Jul. 31, 2019). A gap is added for CSIREF, to
preserve compatibility with the definitions for R-Car M3-W (R8A77960).
Note that internal CPG clocks (S0, S1, S2, S3, SDSRC, SSPSRC, and POST2)
are not included, as they are used as internal clock sources only, and
never referenced from DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191023122941.12342-3-geert+renesas@glider.be
Geert Uytterhoeven [Wed, 23 Oct 2019 12:29:11 +0000 (14:29 +0200)]
dt-bindings: power: Add r8a77961 SYSC power domain definitions
Add power domain indices for the R-Car M3-W+ (R8A77961) SoC.
Based on Rev. 2.00 of the R-Car Series, 3rd Generation, Hardware User’s
Manual (Jul. 31, 2019).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20191023122911.12166-6-geert+renesas@glider.be
Georgii Staroselskii [Fri, 1 Nov 2019 09:43:33 +0000 (12:43 +0300)]
arm64: dts: allwinner: bluetooth for Emlid Neutis N5
The Emlid Neutis N5 board has AP6212 BT+WiFi chip. This patch is in
line with
8558c6e21ceb ("ARM: dts: sun8i: h3: bluetooth for Banana Pi
M2 Zero board") and other commits that add Bluetooth support for
similar boards.
Signed-off-by: Georgii Staroselskii <georgii.staroselskii@emlid.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Karl Palsson [Thu, 31 Oct 2019 23:11:02 +0000 (23:11 +0000)]
ARM: dts: sunxi: h3/h5: add missing uart2 rts/cts pins
uart1 and uart3 had existing pin definitions for the rts/cts pairs.
Add definitions for uart2 as well.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Corentin Labbe [Fri, 25 Oct 2019 18:51:28 +0000 (20:51 +0200)]
ARM: dts: sun9i: a80: Add Security System node
The Security System is a hardware cryptographic accelerator that support
AES/MD5/SHA1/DES/3DES/PRNG/RSA algorithms.
It could be found on Allwinner SoC A80 and A83T
This patch adds it on the Allwinner A80 SoC Device-tree.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Corentin Labbe [Fri, 25 Oct 2019 18:51:27 +0000 (20:51 +0200)]
ARM: dts: sun8i: a83t: Add Security System node
The Security System is a hardware cryptographic accelerator that support
AES/MD5/SHA1/DES/3DES/PRNG/RSA algorithms.
It could be found on Allwinner SoC A80 and A83T
This patch adds it on the Allwinner A83T SoC Device-tree.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Corentin Labbe [Wed, 23 Oct 2019 20:05:10 +0000 (22:05 +0200)]
arm64: dts: allwinner: sun50i: Add Crypto Engine node on H6
The Crypto Engine is a hardware cryptographic accelerator that supports
many algorithms.
This patch enables the Crypto Engine on the Allwinner H6 SoC Device-tree.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Corentin Labbe [Wed, 23 Oct 2019 20:05:09 +0000 (22:05 +0200)]
arm64: dts: allwinner: sun50i: Add crypto engine node on H5
The Crypto Engine is a hardware cryptographic accelerator that supports
many algorithms.
It could be found on most Allwinner SoCs.
This patch enables the Crypto Engine on the Allwinner H5 SoC Device-tree.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Corentin Labbe [Wed, 23 Oct 2019 20:05:08 +0000 (22:05 +0200)]
arm64: dts: allwinner: sun50i: Add Crypto Engine node on A64
The Crypto Engine is a hardware cryptographic accelerator that supports
many algorithms.
It could be found on most Allwinner SoCs.
This patch enables the Crypto Engine on the Allwinner A64 SoC Device-tree.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Corentin Labbe [Wed, 23 Oct 2019 20:05:07 +0000 (22:05 +0200)]
ARM: dts: sun8i: H3: Add Crypto Engine node
The Crypto Engine is a hardware cryptographic accelerator that supports
many algorithms.
It could be found on most Allwinner SoCs.
This patch enables the Crypto Engine on the Allwinner H3 SoC Device-tree.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Corentin Labbe [Wed, 23 Oct 2019 20:05:06 +0000 (22:05 +0200)]
ARM: dts: sun8i: R40: add crypto engine node
The Crypto Engine is a hardware cryptographic offloader that supports
many algorithms.
It could be found on most Allwinner SoCs.
This patch enables the Crypto Engine on the Allwinner R40 SoC Device-tree.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Corentin Labbe [Wed, 23 Oct 2019 20:05:05 +0000 (22:05 +0200)]
dt-bindings: crypto: Add DT bindings documentation for sun8i-ce Crypto Engine
This patch adds documentation for Device-Tree bindings for the
Crypto Engine cryptographic accelerator driver.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Clément Péron [Wed, 30 Oct 2019 15:07:42 +0000 (16:07 +0100)]
arm64: dts: allwinner: Add mali GPU supply for H6 boards
Enable and add supply to the Mali GPU node on all the
H6 boards.
Regarding the datasheet the maximum time for supply to reach
its voltage is 32ms.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Clément Péron [Wed, 30 Oct 2019 15:07:41 +0000 (16:07 +0100)]
arm64: dts: allwinner: Add ARM Mali GPU node for H6
Add the mali gpu node to the H6 device-tree.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Mylène Josserand [Tue, 29 Oct 2019 00:58:06 +0000 (01:58 +0100)]
ARM: dts: sun8i: a83t: a711: Add touchscreen node
Enable a FocalTech EDT-FT5x06 Polytouch touchscreen.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Dmitry Osipenko [Sun, 11 Aug 2019 21:00:39 +0000 (00:00 +0300)]
dt-bindings: memory: Add binding for NVIDIA Tegra30 External Memory Controller
Add device-tree binding for NVIDIA Tegra30 External Memory Controller.
The binding is based on the Tegra124 EMC binding since hardware is
similar, although there are couple significant differences.
Note that the memory timing description is given in a platform-specific
form because there is no detailed information on how to convert a
typical-common DDR timing into the register values. The timing format is
borrowed from downstream kernel, hence there is no hurdle in regards to
upstreaming of memory timings for the boards.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Dmitry Osipenko [Sun, 11 Aug 2019 21:00:38 +0000 (00:00 +0300)]
dt-bindings: memory: Add binding for NVIDIA Tegra30 Memory Controller
Add binding for the NVIDIA Tegra30 SoC Memory Controller.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Dmitry Osipenko [Sun, 11 Aug 2019 21:00:37 +0000 (00:00 +0300)]
dt-bindings: memory: tegra30: Convert to Tegra124 YAML
The Tegra30 binding will actually differ from the Tegra124 a tad, in
particular the EMEM configuration description. Hence rename the binding
to Tegra124 during of the conversion to YAML.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Dmitry Osipenko [Thu, 25 Jul 2019 15:18:30 +0000 (18:18 +0300)]
dt-bindings: regulator: Document regulators coupling of NVIDIA Tegra20/30 SoCs
There is voltage coupling between three regulators on Tegra20 boards and
between two on Tegra30. The voltage coupling is a SoC-level feature and
thus it is mandatory and common for all of the Tegra boards.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Tue, 29 Oct 2019 19:14:44 +0000 (20:14 +0100)]
dt-bindings: clock: tegra: Rename SOR0_LVDS to SOR0_OUT
Tegra186 and later call this clock SOR0_OUT. Rename it on Tegra124 and
Tegra210 to make the names consistent.
Keep the old name for now to keep device trees buildable until they have
all been converted.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Andreas Färber [Sun, 6 Aug 2017 02:44:59 +0000 (04:44 +0200)]
arm64: dts: realtek: Add RTD129x UART resets
Associate the UART nodes with the corresponding reset controller bits.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 6 Aug 2017 01:33:39 +0000 (03:33 +0200)]
arm64: dts: realtek: Add RTD129x reset controller nodes
Add nodes for the Realtek RTD1295 reset controllers.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Tue, 15 Aug 2017 21:50:56 +0000 (23:50 +0200)]
dt-bindings: reset: Add Realtek RTD1295
Add a header with symbolic reset indices for Realtek RTD1295 SoC.
Naming was derived from reset-names in an OEM's Device Tree.
Acked-by: Rob Herring <robh@kernel.org>
[AF: Dropped RTD1295 specific binding definition, updated SPDX]
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 20 Oct 2019 12:41:21 +0000 (14:41 +0200)]
arm64: dts: realtek: Add watchdog node for RTD129x
Add the watchdog node to the RTD129x Device Tree.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
[AF: Moved from RTD1295 to new RTD129x]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 20 Oct 2019 12:41:21 +0000 (14:41 +0200)]
arm64: dts: realtek: Add oscillator for RTD129x
Add 27 MHz oscillator clock node.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Mon, 16 Oct 2017 01:05:30 +0000 (03:05 +0200)]
arm64: dts: realtek: Add RTD1296 and Synology DS418
Add Device Trees for RTD1296 SoC and Synology DiskStation DS418.
Cc: info@synology.com
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Mon, 16 Oct 2017 03:42:42 +0000 (05:42 +0200)]
dt-bindings: arm: realtek: Document RTD1296 and Synology DS418
Define compatible strings for Realtek RTD1296 SoC and Synology
DiskStation DS418 NAS.
Cc: info@synology.com
Acked-by: Rob Herring <robh@kernel.org>
[AF: Converted to json-schema]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Mon, 16 Oct 2017 00:59:37 +0000 (02:59 +0200)]
arm64: dts: realtek: Add RTD1293 and Synology DS418j
Add Device Trees for RTD1293 SoC and Synology DiskStation DS418j NAS.
Cc: info@synology.com
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 20 Oct 2019 03:47:08 +0000 (05:47 +0200)]
arm64: dts: realtek: Change dual-license from MIT to BSD
Move the SPDX-License-Identifier to the top line and update to SPDX 2.0.
While at it, switch from GPLv2+/MIT to GPLv2+/BSD2c before adding more.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Mon, 16 Oct 2017 03:24:06 +0000 (05:24 +0200)]
dt-bindings: arm: realtek: Document RTD1293 and Synology DS418j
Define compatible strings for Realtek RTD1293 SoC and Synology
DiskStation DS418j NAS.
Cc: info@synology.com
Acked-by: Rob Herring <robh@kernel.org>
[AF: Converted to json-schema]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Olof Johansson [Mon, 28 Oct 2019 15:53:16 +0000 (08:53 -0700)]
Merge tag 'stm32-dt-for-v5.5-1' of git://git./linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.5, round 1
Highlights:
----------
MPU part:
-Add and enable ADC support on stm32mp157a-dk1
-Add DAC support on stm32mp157c-ed1
-Add and enable VREFBUF support on stm32mp157a-dk1
-Add focaltech touchscreen on stm32mp157c-dk2
-Add hdmi support on stm32mp157a-dk1
-Fix issues seen during YAML DT validation
-Fix regulators issues for all MPU boards
MCU part:
-Fix issues seen during YAML DT validation
* tag 'stm32-dt-for-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: remove useless dma-ranges property for stm32f469
ARM: dts: stm32: remove useless dma-ranges property for stm32f429
ARM: dts: stm32: disable active-discharge for vbus_otg on stm32mp157a-avenger96
ARM: dts: stm32: Fix active discharge usage on stm32mp157
ARM: dts: stm32: change default minimal buck1 value on stm32mp157
ARM: dts: stm32: add PWR regulators support on stm32mp157
ARM: dts: stm32: remove useless interrupt from dsi node for stm32f469
ARM: dts: stm32: add hdmi audio support to stm32mp157a-dk1 board
ARM: dts: stm32: Add DAC support to stm32mp157c-ed1
ARM: dts: stm32: Add DAC pins used on stm32mp157c-ed1
ARM: dts: stm32: fix regulator-sd_switch node on stm32mp157c-ed1 board
ARM: dts: stm32: remove usb phy-names entries on stm32mp157c-ev1
ARM: dts: stm32: fix joystick node on stm32f746 and stm32mp157c eval boards
ARM: dts: stm32: fix memory nodes to match with DT validation tool
ARM: dts: stm32: add focaltech touchscreen on stm32mp157c-dk2 board
ARM: dts: stm32: enable ADC support on stm32mp157a-dk1
ARM: dts: stm32: add ADC pins used on stm32mp157a-dk1
ARM: dts: stm32: Enable VREFBUF on stm32mp157a-dk1
ARM: dts: stm32: move ltdc pinctrl on stm32mp157a dk1 board
Link: https://lore.kernel.org/r/02c39510-f36d-abbb-c76f-49aff07c0a08@st.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 28 Oct 2019 15:52:40 +0000 (08:52 -0700)]
Merge tag 'juno-update-5.5' of git://git./linux/kernel/git/sudeep.holla/linux into arm/dt
ARMv8 Juno update for v5.5
Single patch to add support for Mali GPU on all versions of Juno.
Though it's disabled by default, it is very useful to test panfrost
drivers.
* tag 'juno-update-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: add GPU subsystem
Link: https://lore.kernel.org/r/20191028040022.GC20568@e107533-lin.cambridge.arm.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Andreas Färber [Sat, 19 Oct 2019 18:39:39 +0000 (20:39 +0200)]
dt-bindings: arm: realtek: Tidy up conversion to json-schema
Restore the device names for compatible strings as comments.
Prepare for adding more SoCs by inserting oneOf.
Fixes:
693af5f3eeaa ("dt-bindings: arm: Convert Realtek board/soc bindings to json-schema")
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Peter Griffin [Tue, 1 Oct 2019 18:35:35 +0000 (18:35 +0000)]
arm64: dts: hisilicon: Add Mali-450 MP4 GPU DT entry
hi6220 has a Mali450 MP4 so lets add it into the DT.
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Benjamin Gaignard [Tue, 15 Oct 2019 12:30:58 +0000 (14:30 +0200)]
ARM: dts: stm32: remove useless dma-ranges property for stm32f469
Remove dma-ranges from ltdc node since it is already set
on bus node.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Benjamin Gaignard [Tue, 15 Oct 2019 12:30:57 +0000 (14:30 +0200)]
ARM: dts: stm32: remove useless dma-ranges property for stm32f429
Remove dma-ranges from ltdc node since it is already set
on bus node.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Pascal Paillet [Fri, 11 Oct 2019 14:05:33 +0000 (16:05 +0200)]
ARM: dts: stm32: disable active-discharge for vbus_otg on stm32mp157a-avenger96
Active discharge is not needed on vbus_otg and generate unneeded current
consumption.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Pascal Paillet [Fri, 11 Oct 2019 14:05:32 +0000 (16:05 +0200)]
ARM: dts: stm32: Fix active discharge usage on stm32mp157
Active discharge is a uint32 not a boolean.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Pascal Paillet [Fri, 11 Oct 2019 14:05:31 +0000 (16:05 +0200)]
ARM: dts: stm32: change default minimal buck1 value on stm32mp157
Minimal value is the value set during boot or before suspend.
We must ensure that the value is a functional value to boot.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Pascal Paillet [Fri, 11 Oct 2019 14:05:30 +0000 (16:05 +0200)]
ARM: dts: stm32: add PWR regulators support on stm32mp157
This patch adds support of STM32 PWR regulators on
stm32mp157c. This replace dummy fixed regulators on
stm32mp157c-ed1 and stm32mp157c-dk2.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Benjamin Gaignard [Fri, 11 Oct 2019 13:06:58 +0000 (15:06 +0200)]
ARM: dts: stm32: remove useless interrupt from dsi node for stm32f469
DSI driver doesn't use interrupt, remove it from the node since it
breaks yaml check.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Olivier Moysan [Thu, 10 Oct 2019 13:02:47 +0000 (15:02 +0200)]
ARM: dts: stm32: add hdmi audio support to stm32mp157a-dk1 board
Add HDMI audio support through Sil9022 HDMI transceiver
on stm32mp157a-dk1 board.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Fabrice Gasnier [Wed, 9 Oct 2019 14:12:52 +0000 (16:12 +0200)]
ARM: dts: stm32: Add DAC support to stm32mp157c-ed1
stm32mp157c-ed1 board has digital-to-analog converter signals routed
to JP11 and JP10 jumpers (e.g. PA4/PA5).
It's easier then to configure them both. But keep them disabled by default,
so the pins are kept in their initial state to lower power consumption.
This way they can also be used as GPIO.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Fabrice Gasnier [Wed, 9 Oct 2019 14:12:51 +0000 (16:12 +0200)]
ARM: dts: stm32: Add DAC pins used on stm32mp157c-ed1
Define pins that can be used by digital-to-analog converter on
stm32mp157c eval daughter board:
- PA4 and PA5 pins are available respectively on JP11 and JP10
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Alexandre Torgue [Mon, 7 Oct 2019 14:34:02 +0000 (16:34 +0200)]
ARM: dts: stm32: fix regulator-sd_switch node on stm32mp157c-ed1 board
This commit fixes regulator-sd_switch node in order to be compliant to
DT validation schema.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Alexandre Torgue [Mon, 7 Oct 2019 14:34:01 +0000 (16:34 +0200)]
ARM: dts: stm32: remove usb phy-names entries on stm32mp157c-ev1
"phy-names" entries are not used. To be compliant with DT validation
tool, those entries have to be remove.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Alexandre Torgue [Mon, 7 Oct 2019 14:34:00 +0000 (16:34 +0200)]
ARM: dts: stm32: fix joystick node on stm32f746 and stm32mp157c eval boards
"#size-cells" entry is not needed for "gpio-keys" driver. Indeed "reg"
entry is not used. This commit will fix a warnings seen by DT validation
tool.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Alexandre Torgue [Mon, 7 Oct 2019 14:33:59 +0000 (16:33 +0200)]
ARM: dts: stm32: fix memory nodes to match with DT validation tool
DT validation ("make dtbs_check") has shown that some memory nodes were not
correctly written. This commit fixes this kind of issue:
"stm32f746-disco.dt.yaml: /: memory: False schema does not allow
{'device_type': ['memory'], 'reg': [[
3221225472, 8388608]]}"
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Yannick Fertré [Fri, 4 Oct 2019 13:17:02 +0000 (15:17 +0200)]
ARM: dts: stm32: add focaltech touchscreen on stm32mp157c-dk2 board
Enable focaltech ft6236 touchscreen on STM32MP157C-DK2 board.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Fabrice Gasnier [Fri, 13 Sep 2019 14:34:40 +0000 (16:34 +0200)]
ARM: dts: stm32: enable ADC support on stm32mp157a-dk1
Configure ADC support on stm32mp157a-dk1. It can be used for various
purpose:
- AIN connector has several analog inputs: ANA0, ANA1, ADC2 in6 & in2,
ADC1 in13 & in6
- USB Type-C CC1 & CC2 pins wired to in18 & in19
It's easier then to Configure them all. But keep them disabled by default,
so the pins are kept in their initial state to lower power consumption.
This way they can also be used as GPIO.
Add VDD and VDDA supplies to ADC on stm32mp157c-dk1 board. This allows to
get full ADC analog performances in case VDDA is below 2.7V (not the case
by default).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Fabrice Gasnier [Fri, 13 Sep 2019 14:34:39 +0000 (16:34 +0200)]
ARM: dts: stm32: add ADC pins used on stm32mp157a-dk1
Define pins that can be used for ADC on stm32mp157a-dk1 board:
- AIN connector has ADC input pins
- USB Type-C CC1 & CC2 pins (e.g. in18, in19)
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Fabrice Gasnier [Fri, 13 Sep 2019 14:34:38 +0000 (16:34 +0200)]
ARM: dts: stm32: Enable VREFBUF on stm32mp157a-dk1
Enable VREFBUF as ADC/DAC uses it on stm32mp157a-dk1 board.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Yannick Fertré [Fri, 2 Aug 2019 14:08:51 +0000 (16:08 +0200)]
ARM: dts: stm32: move ltdc pinctrl on stm32mp157a dk1 board
The ltdc pinctrl must be in the display controller node and
not in the peripheral node (hdmi bridge).
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Geert Uytterhoeven [Wed, 16 Oct 2019 15:11:09 +0000 (17:11 +0200)]
dt-bindings: arm: renesas: Add R-Car M3-N ULCB with Kingfisher
Document the use of the Kingfisher expansion board with the R-Car
Starter Kit Pro equipped with an R-Car M3-N SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191016151109.30747-1-geert+renesas@glider.be
Simon Horman [Sun, 8 Sep 2019 12:05:28 +0000 (13:05 +0100)]
dt-bindings: arm: renesas: Convert 'renesas,prr' to json-schema
Convert Renesas Product Register bindings documentation to json-schema.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20190908120528.9392-1-horms+renesas@verge.net.au
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fabrizio Castro [Tue, 22 Oct 2019 16:21:19 +0000 (17:21 +0100)]
arm64: dts: renesas: r8a774b1: Add SATA controller node
Add the SATA controller node to the RZ/G2N SoC specific
dtsi.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Link: https://lore.kernel.org/r/1571761279-17347-3-git-send-email-fabrizio.castro@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Olof Johansson [Thu, 24 Oct 2019 20:31:27 +0000 (13:31 -0700)]
Merge tag 'omap-for-v5.5/ti-sysc-drop-pdata-v2-signed-take2' of git://git./linux/kernel/git/tmlind/linux-omap into arm/dt
Drop legacy platform data for omaps for v5.5
This series of changes continues dropping legacy platform data for
omaps. With the proper device tree configuration in place in the dts
files for ti-sysc interconnect target module driver, we can drop the
related platform data and legacy ti,hwmods custom property.
Most of the patches in this series drop platform data and custom dts
property one device class and one SoC at time. This way we can easily
revert one patch at a time in case of unexpected issues if the fix is
not trivial.
For am335x musb, we need to first update the device tree to probe with
ti-sysc interconnect target module driver. And then the following
patches drop the legacy platform data.
Note that this series depends on earlier ti-sysc related driver changes
* tag 'omap-for-v5.5/ti-sysc-drop-pdata-v2-signed-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (40 commits)
ARM: OMAP2+: Drop legacy platform data for am335x musb
ARM: dts: Drop pointless status changing for am3 musb
ARM: dts: Probe am335x musb with ti-sysc
ARM: OMAP2+: Drop legacy platform data for musb on omap4
ARM: OMAP2+: Drop legacy platform data for omap4 mcasp
ARM: OMAP2+: Drop legacy platform data for am3 and am4 mcasp
ARM: OMAP2+: Drop legacy platform data for dra7 rng
ARM: OMAP2+: Drop legacy platform data for am3 and am4 rng
ARM: OMAP2+: Drop legacy platform data for omap4 hdq1w
ARM: OMAP2+: Drop legacy platform data for dra7 hdq1w
ARM: OMAP2+: Drop legacy platform data for am4 hdq1w
ARM: OMAP2+: Drop legacy platform data for omap5 mcbsp
ARM: OMAP2+: Drop legacy platform data for omap4 mcbsp
ARM: OMAP2+: Drop legacy platform data for omap5 wdt
ARM: OMAP2+: Drop legacy platform data for dra7 wdt
ARM: OMAP2+: Drop legacy platform data for am3 and am4 wdt
ARM: dts: Drop custom hwmod property for omap5 mmc
ARM: dts: Drop custom hwmod property for am4 mmc
ARM: dts: Drop custom hwmod property for am3 mmc
ARM: dts: Drop custom hwmod property for omap5 i2c
...
Link: https://lore.kernel.org/r/pull-1571934890-285615@atomide.com-3
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 24 Oct 2019 20:25:30 +0000 (13:25 -0700)]
Merge tag 'omap-for-v5.5/dt-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/dt
Device tree changes for omaps for v5.5
This series of changes adds support for few new boards, moves
remaining ti wilink bluetooth users to use the serdev driver,
and improves support for existing devices:
- Add support for NetCAN Plus devices
- Configure wilink bluetooth for logicpd-torpedo and omap3-igep
- Switch to using generic LCD panel for logicpd-torpedo and
increase camera pixel clock
- Configure droid4 for 300mA USB host mode and move to a common file
to start adding support for droid bionic
- Rename ocmcram node to sram
* tag 'omap-for-v5.5/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: add DTS for NetCom Plus 4xx and 8xx device series
ARM: dts: add DTS for NetCom Plus 1xx and 2xx device series
ARM: dts: add DTS for NetCAN Plus devices
ARM: dts: omap: Rename "ocmcram" node to "sram"
ARM: dts: logicpd-torpedo-37xx-devkit: Increase camera pixel clock
ARM: dts: am: Rename "ocmcram" node to "sram"
ARM: dts: logicpd-torpedo: Disable Bluetooth Serial DMA
ARM: dts: IGEP: Add WiLink UART node
ARM: dts: LogicPD Torpedo: Add WiLink UART node
ARM: dts: logicpd-torpedo-37xx-devkit-28: Reference new DRM panel
ARM: dts: logicpd-torpedo-baseboard: Reduce video regulator chatter
ARM: dts: Add minimal support for Droid Bionic xt875
ARM: dts: omap4-droid4: Allow 300mA current for USB peripherals
ARM: dts: Use level interrupt for omap4 & 5 wlcore
Link: https://lore.kernel.org/r/pull-1571934890-285615@atomide.com-2
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 24 Oct 2019 02:59:54 +0000 (19:59 -0700)]
Merge tag 'arm-soc/for-5.5/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 5.5, please pull the following:
- Stefan paves the way for supporting the Raspberry Pi 4 and gets rid of
a bunch of dtc checker warnings by removing incorrect
nodes/properties, moving BCM2835/6/7 specific nodes into the
appropriate DTS, converts Raspberry Pi boards to JSON schema, and
finally adds minimal Raspberry Pi 4 model B support
- Dan adds support for the Luxul XWC-2000 router based on the BCM47094 SoC
- Chris adds a proper label to the Hurricane 2 watchdog controller node
* tag 'arm-soc/for-5.5/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm: HR2: add label to sp805 watchdog
ARM: dts: BCM5301X: Add DT for Luxul XWC-2000
arm64: dts: broadcom: Add reference to RPi 4 B
ARM: dts: Add minimal Raspberry Pi 4 support
dt-bindings: arm: bcm2835: Add Raspberry Pi 4 to DT schema
dt-bindings: arm: Convert BCM2835 board/soc bindings to json-schema
ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi
ARM: dts: bcm283x: Remove brcm,bcm2835-pl011 compatible
ARM: dts: bcm283x: Remove simple-bus from fixed clocks
Link: https://lore.kernel.org/r/20191023212814.30622-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Chris Packham [Tue, 22 Oct 2019 22:19:56 +0000 (11:19 +1300)]
ARM: dts: bcm: HR2: add label to sp805 watchdog
This allows boards the option of adding properties or disabling the
watchdog entirely.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tony Lindgren [Wed, 23 Oct 2019 17:34:28 +0000 (10:34 -0700)]
Merge branch 'omap-for-v5.5/droid4' into omap-for-v5.5/dt
Yegor Yefremov [Tue, 22 Oct 2019 07:21:30 +0000 (09:21 +0200)]
ARM: dts: add DTS for NetCom Plus 4xx and 8xx device series
This DTS file covers all four and eight port NetCom Plus devices.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Yegor Yefremov [Tue, 22 Oct 2019 07:21:29 +0000 (09:21 +0200)]
ARM: dts: add DTS for NetCom Plus 1xx and 2xx device series
This DTS file covers all one and two port NetCom Plus devices.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Yegor Yefremov [Tue, 22 Oct 2019 07:21:28 +0000 (09:21 +0200)]
ARM: dts: add DTS for NetCAN Plus devices
This DTS file covers both NetCAN Plus 110 and 120 WLAN models.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:42 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for am335x musb
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Cc: Bin Liu <b-liu@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:42 +0000 (14:16 -0700)]
ARM: dts: Drop pointless status changing for am3 musb
The default is enabled, and there should be no need to reconfigure
the status for SoC internal devices in the board specific files.
Only the USB PHY used needs to be configured in the board specific
files.
Cc: Bin Liu <b-liu@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:41 +0000 (14:16 -0700)]
ARM: dts: Probe am335x musb with ti-sysc
We can now probe musb with ti-sysc interconnect driver and dts data
with the following changes:
1. Swap the old ti,am33xx-usb compatible wrapper to generic ti-sysc
driver. This means later on we can also remove the old wrapper driver
drivers/usb/musb/musb_am335x.c
2. Update the child nodes to use the ranges provided by ti-sysc
3. Drop unneeded status = "enabled" tinkering for SoC internal devices.
This allows us to remove some useless board specific boilerplate code
in the following patches
Cc: Bin Liu <b-liu@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:41 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for musb on omap4
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:41 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for omap4 mcasp
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:40 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for am3 and am4 mcasp
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Lubomir Rintel [Tue, 22 Oct 2019 15:28:37 +0000 (17:28 +0200)]
ARM: dts: mmp3: add Dell Wyse 3020 machine
This is a Dell Wyse thin client, variously referred to as "Ariel",
"3020" or "Tx0D" where "x" stands for the software it was shipped with.
I somewhat arbitrarily chose "ariel".
There are bits missing, because the drivers are not in and bindings are not
settled yet:
* Things missing from mmp3.dtsi:
HSIC controller and its PHY (only the internal Ethernet is connected
here, the hub with external USB2 ports is connected to the U2O controller
that works well), Vivante GC2000 GPU
* &twsi1/regulator@19
Marvell 88pm867 power regulator
* &twsi3/vga-dvi-encoder@76
Chrontel CH7033B-BF VGA & DVI encoder
* &twsi3/sound-codec@30
Sound chip, probably a Marvell 88ce156
* &twsi4/embedded-controller@58
ENE KB3930QF Embedded Controller, also seems to be connected to &ssp4.
Might not need a driver -- about the only useful thing it can do is to
reboot the machine when tickled via some GPIO lines.
Also there seems to be something at &twsi1 address 0x50.
Link: https://lore.kernel.org/r/20191022152837.3553524-1-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 22 Oct 2019 19:28:26 +0000 (12:28 -0700)]
Merge tag 'actions-arm64-dt-for-v5.5' of git://git./linux/kernel/git/mani/linux-actions into arm/dt
Actions Semi ARM64 changes for v5.5:
Most of the basic infrastructure is completed for the ARM64 S900 SoC.
It can now boot a distro from eMMC/uSD with mainline kernel. Below are
the changes for this cycle (only S900):
- Added MMC controller support for S900 SoC. There are 4 controllers in
this SoC, each capable of accessing MMC cards as well as SDIO.
- Added onboard eMMC and uSD support for 96Boards Bubblegum96 board based
on S900. Since the MMC driver is not capable of supporting SDIO currently,
it is not enabled for now. And with the absence of PMIC support, fixed
regulators are used to model the power supply.
* tag 'actions-arm64-dt-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
arm64: dts: actions: Add uSD and eMMC support for Bubblegum96
arm64: dts: actions: Add MMC controller support for S900
Link: https://lore.kernel.org/r/20191022145012.GB3601@Mani-XPS-13-9360
Signed-off-by: Olof Johansson <olof@lixom.net>