powerpc/85xx: Mark some functions static and add missing includes to fix no previous prototype error

corenet{32/64}_smp_defconfig leads to:

  CC      arch/powerpc/sysdev/ehv_pic.o
arch/powerpc/sysdev/ehv_pic.c:45:6: error: no previous prototype for 'ehv_pic_unmask_irq' [-Werror=missing-prototypes]
   45 | void ehv_pic_unmask_irq(struct irq_data *d)
      |      ^~~~~~~~~~~~~~~~~~
arch/powerpc/sysdev/ehv_pic.c:52:6: error: no previous prototype for 'ehv_pic_mask_irq' [-Werror=missing-prototypes]
   52 | void ehv_pic_mask_irq(struct irq_data *d)
      |      ^~~~~~~~~~~~~~~~
arch/powerpc/sysdev/ehv_pic.c:59:6: error: no previous prototype for 'ehv_pic_end_irq' [-Werror=missing-prototypes]
   59 | void ehv_pic_end_irq(struct irq_data *d)
      |      ^~~~~~~~~~~~~~~
arch/powerpc/sysdev/ehv_pic.c:66:6: error: no previous prototype for 'ehv_pic_direct_end_irq' [-Werror=missing-prototypes]
   66 | void ehv_pic_direct_end_irq(struct irq_data *d)
      |      ^~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/sysdev/ehv_pic.c:71:5: error: no previous prototype for 'ehv_pic_set_affinity' [-Werror=missing-prototypes]
   71 | int ehv_pic_set_affinity(struct irq_data *d, const struct cpumask *dest,
      |     ^~~~~~~~~~~~~~~~~~~~
arch/powerpc/sysdev/ehv_pic.c:112:5: error: no previous prototype for 'ehv_pic_set_irq_type' [-Werror=missing-prototypes]
  112 | int ehv_pic_set_irq_type(struct irq_data *d, unsigned int flow_type)
      |     ^~~~~~~~~~~~~~~~~~~~
  CC      arch/powerpc/sysdev/fsl_rio.o
arch/powerpc/sysdev/fsl_rio.c:102:5: error: no previous prototype for 'fsl_rio_mcheck_exception' [-Werror=missing-prototypes]
  102 | int fsl_rio_mcheck_exception(struct pt_regs *regs)
      |     ^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/sysdev/fsl_rio.c:306:5: error: no previous prototype for 'fsl_map_inb_mem' [-Werror=missing-prototypes]
  306 | int fsl_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
      |     ^~~~~~~~~~~~~~~
arch/powerpc/sysdev/fsl_rio.c:357:6: error: no previous prototype for 'fsl_unmap_inb_mem' [-Werror=missing-prototypes]
  357 | void fsl_unmap_inb_mem(struct rio_mport *mport, dma_addr_t lstart)
      |      ^~~~~~~~~~~~~~~~~
arch/powerpc/sysdev/fsl_rio.c:445:5: error: no previous prototype for 'fsl_rio_setup' [-Werror=missing-prototypes]
  445 | int fsl_rio_setup(struct platform_device *dev)
      |     ^~~~~~~~~~~~~
  CC      arch/powerpc/sysdev/fsl_rmu.o
arch/powerpc/sysdev/fsl_rmu.c:362:6: error: no previous prototype for 'msg_unit_error_handler' [-Werror=missing-prototypes]
  362 | void msg_unit_error_handler(void)
      |      ^~~~~~~~~~~~~~~~~~~~~~
  CC      arch/powerpc/platforms/85xx/corenet_generic.o
arch/powerpc/platforms/85xx/corenet_generic.c:33:13: error: no previous prototype for 'corenet_gen_pic_init' [-Werror=missing-prototypes]
   33 | void __init corenet_gen_pic_init(void)
      |             ^~~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/85xx/corenet_generic.c:51:13: error: no previous prototype for 'corenet_gen_setup_arch' [-Werror=missing-prototypes]
   51 | void __init corenet_gen_setup_arch(void)
      |             ^~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/85xx/corenet_generic.c:104:12: error: no previous prototype for 'corenet_gen_publish_devices' [-Werror=missing-prototypes]
  104 | int __init corenet_gen_publish_devices(void)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~
  CC      arch/powerpc/platforms/85xx/qemu_e500.o
arch/powerpc/platforms/85xx/qemu_e500.c:28:13: error: no previous prototype for 'qemu_e500_pic_init' [-Werror=missing-prototypes]
   28 | void __init qemu_e500_pic_init(void)
      |             ^~~~~~~~~~~~~~~~~~
  CC      arch/powerpc/kernel/pmc.o
arch/powerpc/kernel/pmc.c:78:6: error: no previous prototype for 'power4_enable_pmcs' [-Werror=missing-prototypes]
   78 | void power4_enable_pmcs(void)
      |      ^~~~~~~~~~~~~~~~~~

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/c90780017b624b91771a3e4240dcbadc68137915.1692684784.git.christophe.leroy@csgroup.eu

powerpc/64e: Fix circular dependency with CONFIG_SMP disabled

asm/percpu.h includes asm/paca.h which needs struct tlb_core_data
which is defined in mmu-e500.h

asm/percpu.h is included from asm/mmu.h in a #ifdef CONFIG_E500
before the inclusion of mmu-e500.h

To fix that, move the inclusion of asm/percpu.h into mmu-e500.h
after the definition of struct tlb_core_data

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308220708.nRf5AUAe-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202308220857.uFq2oAxM-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202308221055.lw3UzJIL-lkp@intel.com/
Fixes: 3a24ea0df83e ("powerpc/kuap: Use ASM feature fixups instead of static branches")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/5e0f97d5cbcd05238b56b4424ab096468296824d.1692684461.git.christophe.leroy@csgroup.eu

powerpc/powernv: fix debugfs_create_dir() error checking

The debugfs_create_dir returns ERR_PTR incase of an error and the
correct way of checking it by using the IS_ERR inline function, and
not the simple null comparision. This patch fixes this.

Suggested-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Immad Mir <mirimmad17@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/CY5PR12MB64553EE96EBB3927311DB598C6459@CY5PR12MB6455.namprd12.prod.outlook.com

powerpc/ftrace: Add support for -fpatchable-function-entry

GCC v13.1 updated support for -fpatchable-function-entry on ppc64le to
emit nops after the local entry point, rather than before it. This
allows us to use this in the kernel for ftrace purposes. A new script is
added under arch/powerpc/tools/ to help detect if nops are emitted after
the function local entry point, or before the global entry point.

With -fpatchable-function-entry, we no longer have the profiling
instructions generated at function entry, so we only need to validate
the presence of two nops at the ftrace location in ftrace_init_nop(). We
patch the preceding instruction with 'mflr r0' to match the
-mprofile-kernel ABI for subsequent ftrace use.

This changes the profiling instructions used on ppc32. The default -pg
option emits an additional 'stw' instruction after 'mflr r0' and before
the branch to _mcount 'bl _mcount'. This is very similar to the original
-mprofile-kernel implementation on ppc64le, where an additional 'std'
instruction was used to save LR to its save location in the caller's
stackframe. Subsequently, this additional store was removed in later
compiler versions for performance reasons. The same reasons apply for
ppc32 so we only patch in a 'mflr r0'.

Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/68586d22981a2c3bb45f27a2b621173d10a7d092.1687166935.git.naveen@kernel.org

powerpc/ftrace: Implement ftrace_replace_code()

Implement ftrace_replace_code() to consolidate logic from the different
ftrace patching routines: ftrace_make_nop(), ftrace_make_call() and
ftrace_modify_call(). Note that ftrace_make_call() is still required
primarily to handle patching modules during their load time. The other
two routines should no longer be called.

This lays the groundwork to enable better control in patching ftrace
locations, including the ability to nop-out preceding profiling
instructions when ftrace is disabled.

Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/c28f852225646b0561bbf3c1d22d03f041ace8e0.1687166935.git.naveen@kernel.org

powerpc/ftrace: Replace use of ftrace_call_replace() with ftrace_create_branch_inst()

ftrace_create_branch_inst() is clearer about its intent than
ftrace_call_replace().

Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/953513b88fa922ba7a66d772dc1310710efe9177.1687166935.git.naveen@kernel.org

powerpc/ftrace: Simplify ftrace_modify_call()

Now that we validate the ftrace location during initialization in
ftrace_init_nop(), we can simplify ftrace_modify_call() to patch-in the
updated branch instruction without worrying about the instructions
surrounding the ftrace location. Note that we continue to ensure we
have the expected branch instruction at the ftrace location before
patching it with the updated branch destination.

Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/06275720939f8ee4c2f61c9e9a3e89b1fa3c441d.1687166935.git.naveen@kernel.org

powerpc/ftrace: Simplify ftrace_make_call()

Now that we validate the ftrace location during initialization in
ftrace_init_nop(), we can simplify ftrace_make_call() to replace the nop
without worrying about the instructions surrounding the ftrace location.
Note that we continue to ensure that we have a nop at the ftrace
location before patching it.

Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2d28866d2f556488a663981abe5621511efb207b.1687166935.git.naveen@kernel.org

powerpc/ftrace: Simplify ftrace_make_nop()

Now that we validate the ftrace location during initialization in
ftrace_init_nop(), we can simplify ftrace_make_nop() to patch-in the nop
without worrying about the instructions surrounding the ftrace location.
Note that we continue to ensure that we have a bl to
ftrace_[regs_]caller at the ftrace location before nop-ing it out.

Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/e12ccbf28c50c3a07fb614f4d392e55f7098a729.1687166935.git.naveen@kernel.org

powerpc/ftrace: Add separate ftrace_init_nop() with additional validation

Currently, we validate instructions around the ftrace location every
time we have to enable/disable ftrace. Introduce ftrace_init_nop() to
instead perform all the validation during ftrace initialization. This
allows us to simply patch the necessary instructions during
enabling/disabling ftrace.

Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/f373684081e8e98be09b7f44d2d93069768324dc.1687166935.git.naveen@kernel.org

powerpc/ftrace: Stop re-purposing linker generated long branches for ftrace

Commit 67361cf8071286 ("powerpc/ftrace: Handle large kernel configs")
added ftrace support for ppc64 kernel images with a text section larger
than 32MB. The patch did two things:
1. Add stubs at the end of .text to branch into ftrace_[regs_]caller for
   functions that were out of branch range.
2. Re-purpose linker-generated long branches to _mcount to instead branch
   to ftrace_[regs_]caller.

Before that, we only supported kernel .text up to ~32MB. With the above,
we now support up to ~96MB:
- The first 32MB of kernel text can branch directly into
  ftrace_[regs_]caller since that symbol is usually at the beginning.
- The modified long_branch from (2) above is used by the next 32MB of
  kernel text.
- The next 32MB of kernel text can use the stub at the end of text to
  branch back to ftrace_[regs_]caller.

While re-purposing the long branch works in practice, it still restricts
ftrace to kernel text up to ~96MB. The stub at the end of kernel text
from (1) already enables us to extend ftrace support for kernel text
up to 64MB, which fulfils the original requirement. Further, once we
switch to -fpatchable-function-entry, there will not be a long branch
that we can use.

Stop re-purposing the linker-generated long branches for ftrace to
simplify the code. If there are good reasons to support ftrace on
kernels beyond 64MB, we can consider adding support by using
-fpatchable-function-entry.

Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/33fa3be97f8e1f2171254ef2e1b0d5c8836c11fd.1687166935.git.naveen@kernel.org

powerpc/ftrace: Refactor ftrace_modify_code()

Split up ftrace_modify_code() into a few helpers for future use. Also
update error messages accordingly.

Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/a8daa49712b44ff539e6c22a2ea649a540386798.1687166935.git.naveen@kernel.org

powerpc/ftrace: Consolidate ftrace support into fewer files

ftrace_low.S has just the _mcount stub and return_to_handler(). Merge
this back into ftrace_mprofile.S and ftrace_64_pg.S to keep all ftrace
code together, and to allow those to evolve independently.

ftrace_mprofile.S is also not an entirely accurate name since this also
holds ppc32 code. This will be all the more incorrect once support for
-fpatchable-function-entry is added. Rename files here to more
accurately describe the code:
- ftrace_mprofile.S is renamed to ftrace_entry.S
- ftrace_pg.c is renamed to ftrace_64_pg.c
- ftrace_64_pg.S is rename to ftrace_64_pg_entry.S

Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/b900c9a8bba9d6c3c295e0f99886acf3e5bf6f7b.1687166935.git.naveen@kernel.org

powerpc/ftrace: Extend ftrace support for large kernels to ppc32

Commit 67361cf8071286 ("powerpc/ftrace: Handle large kernel configs")
added ftrace support for ppc64 kernel images with a text section larger
than 32MB. The approach itself isn't specific to ppc64, so extend the
same to also work on ppc32.

While at it, reduce the space reserved for the stub from 64 bytes to 32
bytes since the different stub variants are all less than 8
instructions.

To reduce use of #ifdef, a stub implementation is provided for
kernel_toc_address() and -SZ_2G is cast to 'long long' to prevent
errors on ppc32.

Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/9fa3258cbb9105cf8a0a8135214d44ffbc75fe84.1687166935.git.naveen@kernel.org

powerpc/ftrace: Use FTRACE_REGS_ADDR to identify the correct ftrace trampoline

Instead of keying off DYNAMIC_FTRACE_WITH_REGS, use FTRACE_REGS_ADDR to
identify the proper ftrace trampoline address to use.

Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6045a280a57a7ea937a5bb13ccac747026dbfb07.1687166935.git.naveen@kernel.org

powerpc/ftrace: Simplify function_graph support in ftrace.c

Since we now support DYNAMIC_FTRACE_WITH_ARGS across ppc32 and ppc64
ELFv2, we can simplify function_graph tracer support code in ftrace.c

Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/4dc92c4b1ed444dc62b748ae7327acdb9e096864.1687166935.git.naveen@kernel.org

powerpc64/ftrace: Move ELFv1 and -pg support code into a separate file

ELFv1 support is deprecated and on the way out. Pre -mprofile-kernel
ftrace support (-pg only) is very limited and is retained primarily for
clang builds. It won't be necessary once clang lands support for
-fpatchable-function-entry.

Copy the existing ftrace code supporting these into ftrace_pg.c.
ftrace.c can then be refactored and enhanced with a focus on ppc32 and
ppc64 ELFv2.

Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1eb6cc6c3141ddb77a2a25f8a9e83d83ff312b02.1687166935.git.naveen@kernel.org

powerpc/module: Remove unused .ftrace.tramp section

.ftrace.tramp section is not used for any purpose. This code was added
all the way back in the original commit introducing support for dynamic
ftrace on ppc64 modules. Remove it.

Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/9cf6d7f37ba82f7cb6dafecf660f44925c526d8d.1687166935.git.naveen@kernel.org

powerpc/ftrace: Fix dropping weak symbols with older toolchains

The minimum level of gcc supported for building the kernel is v5.1.
v5.x releases of gcc emitted a three instruction sequence for
-mprofile-kernel:
mflr r0
std r0, 16(r1)
bl _mcount

It is only with the v6.x releases that gcc started emitting the two
instruction sequence for -mprofile-kernel, omitting the second store
instruction.

With the older three instruction sequence, the actual ftrace location
can be the 5th instruction into a function. Update the allowed offset
for ftrace location from 12 to 16 to accommodate the same.

Cc: stable@vger.kernel.org
Fixes: 7af82ff90a2b06 ("powerpc/ftrace: Ignore weak functions")
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/7b265908a9461e38fc756ef9b569703860a80621.1687166935.git.naveen@kernel.org

powerpc/perf: Convert fsl_emb notifier to state machine callbacks

  CC      arch/powerpc/perf/core-fsl-emb.o
arch/powerpc/perf/core-fsl-emb.c:675:6: error: no previous prototype for 'hw_perf_event_setup' [-Werror=missing-prototypes]
  675 | void hw_perf_event_setup(int cpu)
      |      ^~~~~~~~~~~~~~~~~~~

Looks like fsl_emb was completely missed by commit 3f6da3905398 ("perf:
Rework and fix the arch CPU-hotplug hooks")

So, apply same changes as commit 3f6da3905398 ("perf: Rework and fix
the arch CPU-hotplug hooks") then commit 57ecde42cc74 ("powerpc/perf:
Convert book3s notifier to state machine callbacks")

While at it, also fix following error:

arch/powerpc/perf/core-fsl-emb.c: In function 'perf_event_interrupt':
arch/powerpc/perf/core-fsl-emb.c:648:13: error: variable 'found' set but not used [-Werror=unused-but-set-variable]
  648 |         int found = 0;
      |             ^~~~~

Fixes: 3f6da3905398 ("perf: Rework and fix the arch CPU-hotplug hooks")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/603e1facb32608f88f40b7d7b9094adc50e7b2dc.1692349125.git.christophe.leroy@csgroup.eu

PCI: rpaphp: Error out on busy status from get-sensor-state

When certain PHB HW failure causes pHyp to recover PHB, it marks the PE
state as temporarily unavailable until recovery is complete. This also
triggers an EEH handler in Linux which needs to notify drivers, and perform
recovery. But before notifying the driver about the PCI error it uses
get_adapter_status()->rpaphp_get_sensor_state()->rtas_call(get-sensor-state)
operation of the hotplug_slot to determine if the slot contains a device or
not. If the slot is empty, the recovery is skipped entirely.

eeh_event_handler()
  ->eeh_handle_normal_event()
    ->eeh_slot_presence_check()
      ->get_adapter_status()
        ->rpaphp_get_sensor_state()
          ->rtas_get_sensor()
            ->rtas_call(get-sensor-state)

However on certain PHB failures, the RTAS call rtas_call(get-sensor-state)
returns extended busy error (9902) until PHB is recovered by pHyp. Once PHB
is recovered, the rtas_call(get-sensor-state) returns success with correct
presence status. The RTAS call interface rtas_get_sensor() loops over the
RTAS call on extended delay return code (9902) until the return value is
either success (0) or error (-1). This causes the EEH handler to get stuck
for ~6 seconds before it could notify that the PCI error has been detected
and stop any active operations. Hence with running I/O traffic, during this
6 seconds, the network driver continues its operation and hits a timeout
(netdev watchdog).

------------
[52732.244731] DEBUG: ibm_read_slot_reset_state2()
[52732.244762] DEBUG: ret = 0, rets[0]=5, rets[1]=1, rets[2]=4000, rets[3]=>
[52732.244798] DEBUG: in eeh_slot_presence_check
[52732.244804] DEBUG: error state check
[52732.244807] DEBUG: Is slot hotpluggable
[52732.244810] DEBUG: hotpluggable ops ?
[52732.244953] DEBUG: Calling ops->get_adapter_status
[52732.244958] DEBUG: calling rpaphp_get_sensor_state
[52736.564262] ------------[ cut here ]------------
[52736.564299] NETDEV WATCHDOG: enP64p1s0f3 (tg3): transmit queue 0 timed o>
[52736.564324] WARNING: CPU: 1442 PID: 0 at net/sched/sch_generic.c:478 dev>
[...]
[52736.564505] NIP [c000000000c32368] dev_watchdog+0x438/0x440
[52736.564513] LR [c000000000c32364] dev_watchdog+0x434/0x440
------------

On timeouts, network driver starts dumping debug information to console
(e.g bnx2 driver calls bnx2x_panic_dump()), and go into recovery path while
pHyp is still recovering the PHB. As part of recovery, the driver tries to
reset the device and it keeps failing since every PCI read/write returns
ff's. And when EEH recovery kicks-in, the driver is unable to recover the
device. This impacts the ssh connection and leads to the system being
inaccessible. To get the NIC working again it needs a reboot or re-assign
the I/O adapter from HMC.

[ 9531.168587] EEH: Beginning: 'slot_reset'
[ 9531.168601] PCI 0013:01:00.0#10000: EEH: Invoking bnx2x->slot_reset()
[...]
[ 9614.110094] bnx2x: [bnx2x_func_stop:9129(enP19p1s0f0)]FUNC_STOP ramrod failed. Running a dry transaction
[ 9614.110300] bnx2x: [bnx2x_igu_int_disable:902(enP19p1s0f0)]BUG! Proper val not read from IGU!
[ 9629.178067] bnx2x: [bnx2x_fw_command:3055(enP19p1s0f0)]FW failed to respond!
[ 9629.178085] bnx2x 0013:01:00.0 enP19p1s0f0: bc 7.10.4
[ 9629.178091] bnx2x: [bnx2x_fw_dump_lvl:789(enP19p1s0f0)]Cannot dump MCP info while in PCI error
[ 9644.241813] bnx2x: [bnx2x_io_slot_reset:14245(enP19p1s0f0)]IO slot reset --> driver unload
[...]
[ 9644.241819] PCI 0013:01:00.0#10000: EEH: bnx2x driver reports: 'disconnect'
[ 9644.241823] PCI 0013:01:00.1#10000: EEH: Invoking bnx2x->slot_reset()
[ 9644.241827] bnx2x: [bnx2x_io_slot_reset:14229(enP19p1s0f1)]IO slot reset initializing...
[ 9644.241916] bnx2x 0013:01:00.1: enabling device (0140 -> 0142)
[ 9644.258604] bnx2x: [bnx2x_io_slot_reset:14245(enP19p1s0f1)]IO slot reset --> driver unload
[ 9644.258612] PCI 0013:01:00.1#10000: EEH: bnx2x driver reports: 'disconnect'
[ 9644.258615] EEH: Finished:'slot_reset' with aggregate recovery state:'disconnect'
[ 9644.258620] EEH: Unable to recover from failure from PHB#13-PE#10000.
[ 9644.261811] EEH: Beginning: 'error_detected(permanent failure)'
[...]
[ 9644.261823] EEH: Finished:'error_detected(permanent failure)'

Hence, it becomes important to inform driver about the PCI error detection
as early as possible, so that driver is aware of PCI error and waits for
EEH handler's next action for successful recovery.

Current implementation uses rtas_get_sensor() API which blocks the slot
check state until RTAS call returns success. To avoid this, fix the PCI
hotplug driver (rpaphp) to return an error (-EBUSY) if the slot presence
state can not be detected immediately while PE is in EEH recovery state.
Change rpaphp_get_sensor_state() to invoke rtas_call(get-sensor-state)
directly only if the respective PE is in EEH recovery state, and take
actions based on RTAS return status. This way EEH handler will not be
blocked on rpaphp_get_sensor_state() and can immediately notify driver
about the PCI error and stop any active operations.

In normal cases (non-EEH case) rpaphp_get_sensor_state() will continue to
invoke rtas_get_sensor() as it was earlier with no change in existing
behavior.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/169235815601.193557.13989873835811325343.stgit@jupiter

powerpc/rtas: export rtas_error_rc() for reuse.

Also, #define descriptive names for common rtas return codes and use it
instead of numeric values.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/169235811556.193557.1023625262204809514.stgit@jupiter

powerpc/idle: Add support for nohlt

This patch enables config option GENERIC_IDLE_POLL_SETUP for arch
powerpc. This adds support for kernel param 'nohlt'.

Powerpc kernel also supports another kernel boot-time param called
'powersave' which can also be used to disable all cpu idle-states and
forces CPU to an idle-loop similar to what cpu_idle_poll() does. This
patch however makes powerpc kernel-parameters better aligned to the
generic boot-time parameters.

Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230818050739.827851-1-vaibhav@linux.ibm.com

powerpc/fadump: invoke ibm,os-term with rtas_call_unlocked()

Invoke ibm,os-term call with rtas_call_unlocked(), without using the
RTAS spinlock, to avoid deadlock in the unlikely event of a machine
crash while making an RTAS call.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230609071404.425529-1-hbathini@linux.ibm.com

selftests/powerpc: add const qualification where possible

Various char * parameters in the common powerpc selftest APIs can be
const.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230817-powerpc-selftest-misc-v1-2-a84cc1ef78b2@linux.ibm.com

powerpc/selftests: sort mm/.gitignore, add exec_prot

Add exec_prot to to mm/.gitignore and sort the result.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230817-powerpc-selftest-misc-v1-1-a84cc1ef78b2@linux.ibm.com

powerpc: Move DMA64_PROPNAME define to a header

Avoid redefining the same value in multiple source.

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230817162411.429-1-msuchanek@suse.de

Revert "powerpc/xmon: Relax frame size for clang"

This reverts commit 9c87156cce5a63735d1218f0096a65c50a7a32aa.

I have not been able to reproduce the reported -Wframe-larger-than=
warning (or disassembly) with clang-11 or clang-18.

I don't know precisely when this was fixed in llvm, but it may be time
to revert this.

Closes: https://github.com/ClangBuiltLinux/linux/issues/252
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230817-ppc_xmon-v1-1-8cc2d51b9995@google.com

powerpc/mm: Cleanup memory block size probing

Parse the device tree in early init to find the memory block size to be
used by the kernel. Consolidate the memory block size device tree parsing
to one helper and use that on both powernv and pseries. We still want to
use machine-specific callback because on all machine types other than
powernv and pseries we continue to return MIN_MEMORY_BLOCK_SIZE.

pseries_memory_block_size used to look for the second memory
block (memory@x) to determine the memory_block_size value. This patch
changed that to look at all memory blocks and make sure we can map them all
correctly using the computed memory block size value.

Add workaround to force 256MB memory block size if device driver managed
memory such as GPU memory is present. This helps to add GPU memory
that is not aligned to 1G.

Co-developed-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801044447.11275-1-aneesh.kumar@linux.ibm.com

powerpc/configs: Drop CONFIG_IP_NF_TARGET_CLUSTERIP

Drop CONFIG_IP_NF_TARGET_CLUSTERIP as it was removed in commit 9db5d918e2c0
("netfilter: ip_tables: remove clusterip target").

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230817115017.35663-5-twoerner@gmail.com

powerpc/fadump: reset dump area size if fadump memory reserve fails

In case fadump_reserve_mem() fails to reserve memory, the
reserve_dump_area_size variable will retain the reserve area size. This
will lead to /sys/kernel/fadump/mem_reserved node displaying an incorrect
memory reserved by fadump.

To fix this problem, reserve dump area size variable is set to 0 if fadump
failed to reserve memory.

Fixes: 8255da95e545 ("powerpc/fadump: release all the memory above boot memory size")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230704050715.203581-1-sourabhjain@linux.ibm.com

powerpc/4xx: Add missing includes to fix no previous prototype errors

A W=1 build of ppc40x_defconfig throws the followings errors:

  CC      arch/powerpc/platforms/4xx/uic.o
arch/powerpc/platforms/4xx/uic.c:274:13: warning: no previous prototype for 'uic_init_tree' [-Wmissing-prototypes]
  274 | void __init uic_init_tree(void)
      |             ^~~~~~~~~~~~~
arch/powerpc/platforms/4xx/uic.c:319:14: warning: no previous prototype for 'uic_get_irq' [-Wmissing-prototypes]
  319 | unsigned int uic_get_irq(void)
      |              ^~~~~~~~~~~
  CC      arch/powerpc/platforms/4xx/machine_check.o
  CC      arch/powerpc/platforms/4xx/soc.o
arch/powerpc/platforms/4xx/soc.c:193:6: warning: no previous prototype for 'ppc4xx_reset_system' [-Wmissing-prototypes]
  193 | void ppc4xx_reset_system(char *cmd)
      |      ^~~~~~~~~~~~~~~~~~~

Add missing includes to get the missing prototypes.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/c8253017e355638132737ff47936e290df8738d1.1692282432.git.christophe.leroy@csgroup.eu

powerpc/47x: Add prototype for mmu_init_secondary()

A W=1 build of 44x/iss476-smp_defconfig gives:

arch/powerpc/mm/nohash/44x.c:220:13: error: no previous prototype for 'mmu_init_secondary' [-Werror=missing-prototypes]
  220 | void __init mmu_init_secondary(int cpu)
      |             ^~~~~~~~~~~~~~~~~~

That function is called from head_4xx.S

Add a prototype in mmu_decl.h

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/e89d9927c926044e54fd056a849785f526c6414f.1692282340.git.christophe.leroy@csgroup.eu

powerpc/47x: Remove early_init_mmu_47x() to fix no previous prototype

4xx/iss476-smp_defconfig leads to:

  CC      arch/powerpc/mm/nohash/tlb.o
arch/powerpc/mm/nohash/tlb.c:322:13: error: no previous prototype for 'early_init_mmu_47x' [-Werror=missing-prototypes]
  322 | void __init early_init_mmu_47x(void)
      |             ^~~~~~~~~~~~~~~~~~

early_init_mmu_47x() is used only at one place and only locally.

Fold it into its only caller and remove it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/0a667b7c2e05d3cf41ecd38f33cc334083a61c8d.1692282396.git.christophe.leroy@csgroup.eu

powerpc/4xx: Remove pika_dtm_[un]register_shutdown() to fix no previous prototype

ppc4xx_defconfig with W=1 results in:

  CC      arch/powerpc/platforms/44x/warp.o
arch/powerpc/platforms/44x/warp.c:369:5: error: no previous prototype for 'pika_dtm_register_shutdown' [-Werror=missing-prototypes]
  369 | int pika_dtm_register_shutdown(void (*func)(void *arg), void *arg)
      |     ^~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/44x/warp.c:374:5: error: no previous prototype for 'pika_dtm_unregister_shutdown' [-Werror=missing-prototypes]
  374 | int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
      |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

The functions were added by commit 4ebef31fa6e0 ("[POWERPC] PIKA Warp:
Update platform code to support Rev B boards")

Those functions are not used localy and allthough their symbols are
exported they are not declared in any header file so they can't be used.

Remove them, then remove the associated list as it will now remain empty
hence becomes useless.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/830923f0e0375a14609204246d302c7476a8f948.1692279855.git.christophe.leroy@csgroup.eu

powerpc/4xx: Remove WatchdogHandler() to fix no previous prototype error

Building ppc40x_defconfig throws the following error:

  CC      arch/powerpc/kernel/traps.o
arch/powerpc/kernel/traps.c:2232:29: warning: no previous prototype for 'WatchdogHandler' [-Wmissing-prototypes]
 2232 | void __attribute__ ((weak)) WatchdogHandler(struct pt_regs *regs)
      |                             ^~~~~~~~~~~~~~~

This function was imported by commit 14cf11af6cf6 ("powerpc: Merge
enough to start building in arch/powerpc.") as a weak function but
never defined and/or called outside traps.c

As it has only one caller fold it inside its caller and remove it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/38fe1078eb403eef74dc8f29387636fd7ecdf43c.1692276041.git.christophe.leroy@csgroup.eu

powerpc/32s: Cleanup the mess in __set_pte_at()

__set_pte_at() handles 3 main cases with #ifdefs plus the 'percpu'
subcase which leads to code duplication.

Rewrite the function using IS_ENABLED() to minimise the total number
of cases and remove duplicated code.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2322dd08217bccab25456fe8b189edf0e6a8b6dd.1692121353.git.christophe.leroy@csgroup.eu

powerpc/8xx: Remove init_internal_rtc() to fix no previous prototype error

A W=1 build of mpc885_ads_defconfig throws the following error:

  CC      arch/powerpc/platforms/8xx/m8xx_setup.o
arch/powerpc/platforms/8xx/m8xx_setup.c:41:1: error: no previous prototype for 'init_internal_rtc' [-Werror=missing-prototypes]
   41 | init_internal_rtc(void)
      | ^~~~~~~~~~~~~~~~~

init_internal_rtc() was introduced by commit df34403dcaac ("[POWERPC]
8xx: Add mpc885ads support and common mpc8xx files") as a weak
function but has never been defined and/or used outside m8xx_setup.c

As it is called only once there, just fold it into its caller and
remove it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/0aa1141e18a84d926e199093204b37ec993f0c87.1692275185.git.christophe.leroy@csgroup.eu

powerpc/82xx: Remove CONFIG_8260 and CONFIG_8272

CONFIG_8272 is never used, remove it.

CONFIG_8260 is redundant with CONFIG_PPC_82xx, remove it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/80930252a5167f3cdaa7eb694074d75521a0bdf9.1692259495.git.christophe.leroy@csgroup.eu

powerpc/82xx: Remove pq2_init_pci

Commit 859b21a008eb ("powerpc: drop PowerQUICC II Family ADS platform
support") removed last user of pq2_init_pci.

Remove it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/8b2db7c3c2c346aa8aa49507415c360d441e5bf5.1692259498.git.christophe.leroy@csgroup.eu

powerpc/83xx: Split usb.c

usb.c contains three independent parts with no common part.

Split it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Drop usb.o from Makefile to fix build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/75712b54bf9cb85ab10e47cd2772cd2a098ca895.1692199324.git.christophe.leroy@csgroup.eu

powerpc/83xx: Fix style problems in usb.c and remove unneccessary includes from mpc83xx.h

Replace printk(KERN_WARN with pr_warn(

Remove a couple of blank lines

Re-align multi-line code.

Replace asm/io.h by linux/io.h

mpc83xx.h doesn't need linux/device.h or asm/pci-bridge.h

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2cb498f637e082a4af8032311fad3cae84d6aa5d.1692199324.git.christophe.leroy@csgroup.eu

powerpc/fsl_pci: Make fsl_add_bridge() static

Since commit 905e75c46dba ("powerpc/fsl-pci: Unify pci/pcie initialization code")
fsl_add_bridge() is not used anymore outside of fsl_pci.c

Make it static.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2115e3597d81e72a865820af54f0e290d0fd2b3a.1692199186.git.christophe.leroy@csgroup.eu

powerpc/512x: Make mpc512x_select_reset_compat() static

mpc512x_select_reset_compat() is only used in the file it
is defined.

Make it static.

Move mpc512x_restart_init() after mpc512x_select_reset_compat().

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/36a19e13025dbf17e92e832dd24150642b0e9bad.1692341499.git.christophe.leroy@csgroup.eu

powerpc/ps3: refactor strncpy usage

`strncpy` is deprecated for use on NUL-terminated destination strings [1].

`make_first_field()` should use similar implementation to `make_field()`
due to memcpy having more obvious behavior here. The end result yields
the same behavior as the previous `strncpy`-based implementation
including the NUL-padding.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230816-strncpy-arch-powerpc-platforms-ps3-repository-v1-1-88283b02fb09@google.com

powerpc/ptrace: Split gpr32_set_common

objtool reports the following warning:

  arch/powerpc/kernel/ptrace/ptrace-view.o: warning: objtool:
    gpr32_set_common+0x23c (.text+0x860): redundant UACCESS disable

gpr32_set_common() conditionally opens and closes UACCESS based on
whether kbuf pointer is NULL or not. This is wackelig.

Split gpr32_set_common() in two fonctions, one for user one for
kernel.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix oops in gpr32_set_common_user() due to NULL kbuf]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/b8d6ae4483fcfd17524e79d803c969694a85cc02.1687428075.git.christophe.leroy@csgroup.eu

Documentation/powerpc: Fix ptrace request names

The documented ptrace request names are currently wrong/incomplete.
Fix this to improve correctness and searchability.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230725005841.28854-2-bgray@linux.ibm.com

perf/hw_breakpoint: Remove arch breakpoint hooks

PowerPC was the only user of these hooks, and has been refactored to no
longer require them. There is no need to keep them around, so remove
them to reduce complexity.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801011744.153973-8-bgray@linux.ibm.com

selftests/powerpc/ptrace: Update ptrace-perf watchpoint selftest

Now that ptrace and perf are no longer exclusive, update the
test to exercise interesting interactions.

An assembly file is used for the children to allow precise instruction
choice and addresses, while avoiding any compiler quirks.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801011744.153973-7-bgray@linux.ibm.com

powerpc/watchpoints: Remove ptrace/perf exclusion tracking

ptrace and perf watchpoints were considered incompatible in
commit 29da4f91c0c1 ("powerpc/watchpoint: Don't allow concurrent perf
and ptrace events"), but the logic in that commit doesn't really apply.

Ptrace doesn't automatically single step; the ptracer must request this
explicitly. And the ptracer can do so regardless of whether a
ptrace/perf watchpoint triggered or not: it could single step every
instruction if it wanted to. Whatever stopped the ptracee before
executing the instruction that would trigger the perf watchpoint is no
longer relevant by this point.

To get correct behaviour when perf and ptrace are watching the same
data we must ignore the perf watchpoint. After all, ptrace has
before-execute semantics, and perf is after-execute, so perf doesn't
actually care about the watchpoint trigger at this point in time.
Pausing before execution does not mean we will actually end up executing
the instruction.

Importantly though, we don't remove the perf watchpoint yet. This is
key.

The ptracer is free to do whatever it likes right now. E.g., it can
continue the process, single step. or even set the child PC somewhere
completely different.

If it does try to execute the instruction though, without reinserting
the watchpoint (in which case we go back to the start of this example),
the perf watchpoint would immediately trigger. This time there is no
ptrace watchpoint, so we can safely perform a single step and increment
the perf counter. Upon receiving the single step exception, the existing
code already handles propagating or consuming it based on whether
another subsystem (e.g. ptrace) requested a single step. Again, this is
needed with or without perf/ptrace exclusion, because ptrace could be
single stepping this instruction regardless of if a watchpoint is
involved.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801011744.153973-6-bgray@linux.ibm.com

powerpc/watchpoints: Simplify watchpoint reinsertion

We only remove watchpoints when they have the perf_single_step flag set,
so we can reinsert them during the first iteration.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801011744.153973-5-bgray@linux.ibm.com

powerpc/watchpoints: Track perf single step directly on the breakpoint

There is a bug in the current watchpoint tracking logic, where the
teardown in arch_unregister_hw_breakpoint() uses bp->ctx->task, which it
does not have a reference of and parallel threads may be in the process
of destroying. This was partially addressed in commit fb822e6076d9
("powerpc/hw_breakpoint: Fix oops when destroying hw_breakpoint event"),
but the underlying issue of accessing a struct member in an unknown
state still remained. Syzkaller managed to trigger a null pointer
derefernce due to the race between the task destructor and checking the
pointer and dereferencing it in the loop.

While this null pointer dereference could be fixed by using READ_ONCE
to access the task up front, that just changes the error to manipulating
possbily freed memory.

Instead, the breakpoint logic needs to be reworked to remove any
dependency on a context or task struct during breakpoint removal.

The reason we have this currently is to clear thread.last_hit_ubp. This
member is used to differentiate the perf DAWR single-step sequence from
other causes of single-step, such as userspace just calling
ptrace(PTRACE_SINGLESTEP, ...). We need to differentiate them because,
when the single step interrupt is received, we need to know whether to
re-insert the DAWR breakpoint (perf) or not (ptrace / other).

arch_unregister_hw_breakpoint() needs to clear this information to
prevent dangling pointers to possibly freed memory. These pointers are
dereferenced in single_step_dabr_instruction() without a way to check
their validity.

This patch moves the tracking of this information to the breakpoint
itself. This means we no longer have to do anything special to clean up.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801011744.153973-4-bgray@linux.ibm.com

powerpc/watchpoints: Don't track info persistently

info is cheap to retrieve, and is likely optimised by the compiler
anyway. On the other hand, propagating it across the functions makes it
possible to be inconsistent and adds needless complexity.

Remove it, and invoke counter_arch_bp() when we need to work with it.

As we don't persist it, we just use the local bp array to track whether
we are ignoring a breakpoint.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801011744.153973-3-bgray@linux.ibm.com

powerpc/watchpoints: Explain thread_change_pc() more

The behaviour of the thread_change_pc() function is a bit cryptic
without being more familiar with how the watchpoint logic handles
perf's after-execute semantics.

Expand the comment to explain why we can re-insert the breakpoint and
unset the perf_single_step flag.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801011744.153973-2-bgray@linux.ibm.com

docs: ABI: sysfs-bus-event_source-devices-hv_gpci: Document affinity_domain_via_partition sysfs interface file

Add details of the new hv-gpci interface file called
"affinity_domain_via_partition" in the ABI documentation.

Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-11-kjain@linux.ibm.com

powerpc/hv_gpci: Add sysfs file inside hv_gpci device to show affinity domain via partition information

The hcall H_GET_PERF_COUNTER_INFO with counter request value as
AFFINITY_DOMAIN_INFORMATION_BY_PARTITION(0XB1), can be used to get
the system affinity domain via partition information. To expose the system
affinity domain via partition information, patch adds sysfs file called
"affinity_domain_via_partition" to the "/sys/devices/hv_gpci/interface/"
of hv_gpci pmu driver.

Add new entry for AFFINITY_DOMAIN_VIA_PAR in sysinfo_counter_request
array, which points to the counter request value
"affinity_domain_via_partition" in hv-gpci.c file. Also add a
new function called "affinity_domain_via_partition_result_parse" to parse
the hcall result and store it in output buffer.

The affinity_domain_via_partition sysfs file is only available for power10
and above platforms. Add a macro called
INTERFACE_AFFINITY_DOMAIN_VIA_PAR_ATTR, which points to the index of NULL
placeholder, for affinity_domain_via_partition attribute in
interface_attrs array. Also updated the value of INTERFACE_NULL_ATTR
macro in hv-gpci.c file.

Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-10-kjain@linux.ibm.com

docs: ABI: sysfs-bus-event_source-devices-hv_gpci: Document affinity_domain_via_domain sysfs interface file

Add details of the new hv-gpci interface file called
"affinity_domain_via_domain" in the ABI documentation.

Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-9-kjain@linux.ibm.com

powerpc/hv_gpci: Add sysfs file inside hv_gpci device to show affinity domain via domain information

The hcall H_GET_PERF_COUNTER_INFO with counter request value as
AFFINITY_DOMAIN_INFORMATION_BY_DOMAIN(0XB0), can be used to get
the system affinity domain via domain information. To expose the system
affinity domain via domain information, patch adds sysfs file called
"affinity_domain_via_domain" to the "/sys/devices/hv_gpci/interface/"
of hv_gpci pmu driver.

Add new entry for AFFINITY_DOMAIN_VIA_DOM in sysinfo_counter_request
array, which points to the counter request value
"affinity_domain_via_domain" in hv-gpci.c file.

The affinity_domain_via_domain sysfs file is only available for power10
and above platforms. Add a macro called
INTERFACE_AFFINITY_DOMAIN_VIA_DOM_ATTR, which points to the index of NULL
placeholder, for affinity_domain_via_domain attribute in interface_attrs
array. Also updated the value of INTERFACE_NULL_ATTR macro in hv-gpci.c
file.

Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-8-kjain@linux.ibm.com

docs: ABI: sysfs-bus-event_source-devices-hv_gpci: Document affinity_domain_via_virtual_processor sysfs interface file

Add details of the new hv-gpci interface file called
"affinity_domain_via_virtual_processor" in the ABI documentation.

Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-7-kjain@linux.ibm.com

powerpc/hv_gpci: Add sysfs file inside hv_gpci device to show affinity domain via virtual processor information

The hcall H_GET_PERF_COUNTER_INFO with counter request value as
AFFINITY_DOMAIN_INFORMATION_BY_VIRTUAL_PROCESSOR(0XA0), can be used to get
the system affinity domain via virtual processor information. To expose
the system affinity domain via virtual processor information, patch adds
sysfs file called "affinity_domain_via_virtual_processor" to the
"/sys/devices/hv_gpci/interface/" of hv_gpci pmu driver.

The affinity_domain_via_virtual_processor sysfs file is only available for
power10 and above platforms. Add a macro called
INTERFACE_AFFINITY_DOMAIN_VIA_VP_ATTR, which points to the index of NULL
placeholder, for affinity_domain_via_virtual_processor attribute in
interface_attrs array. Also updated the value of INTERFACE_NULL_ATTR macro
in hv-gpci.c file.

Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-6-kjain@linux.ibm.com

docs: ABI: sysfs-bus-event_source-devices-hv_gpci: Document processor_config sysfs interface file

Add details of the new hv-gpci interface file called
"processor_config" in the ABI documentation.

Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-5-kjain@linux.ibm.com

powerpc/hv_gpci: Add sysfs file inside hv_gpci device to show processor config information

The hcall H_GET_PERF_COUNTER_INFO with counter request value as
PROCESSOR_CONFIG(0X90), can be used to get the system
processor configuration information. To expose the system
processor config information, patch adds sysfs file called
"processor_config" to the "/sys/devices/hv_gpci/interface/"
of hv_gpci pmu driver.

Add enum and sysinfo_counter_request array to get required
counter request value in hv-gpci.c file.
Also add a new function called "sysinfo_device_attr_create",
which will create and return required device attribute to the
add_sysinfo_interface_files function.

The processor_config sysfs file is only available for power10
and above platforms. Add a new macro called
INTERFACE_PROCESSOR_CONFIG_ATTR, which points to the index of
NULL placefolder, for processor_config attribute in the interface_attrs
array. Also add macro INTERFACE_NULL_ATTR which points to index of NULL
attribute in interface_attrs array.

Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-4-kjain@linux.ibm.com

docs: ABI: sysfs-bus-event_source-devices-hv_gpci: Document processor_bus_topology sysfs interface file

Add details of the new hv-gpci interface file called
"processor_bus_topology" in the ABI documentation.

Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-3-kjain@linux.ibm.com

powerpc/hv_gpci: Add sysfs file inside hv_gpci device to show processor bus topology information

The hcall H_GET_PERF_COUNTER_INFO with counter request value as
PROCESSOR_BUS_TOPOLOGY(0XD0), can be used to get the system
topology information. To expose the system topology information,
patch adds sysfs file called "processor_bus_topology" to the
"/sys/devices/hv_gpci/interface/" of hv_gpci pmu driver.

Add macro for PROCESSOR_BUS_TOPOLOGY counter request value
in hv-gpci.c file. Also add a new function called
"systeminfo_gpci_request", to make the H_GET_PERF_COUNTER_INFO hcall
with added macro and populates the output buffer.

The processor_bus_topology sysfs file is only available for power10
and above platforms. Add a new function called
"add_sysinfo_interface_files", which will add processor_bus_topology
attribute in the interface_attrs array, only for power10 and
above platforms.
Also add macro INTERFACE_PROCESSOR_BUS_TOPOLOGY_ATTR in hv-gpci.c
file, which points to the index of NULL placefolder, for
processor_bus_topology attribute.

Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-2-kjain@linux.ibm.com

powerpc: Make virt_to_pfn() a static inline

Making virt_to_pfn() a static inline taking a strongly typed
(const void *) makes the contract of a passing a pointer of that
type to the function explicit and exposes any misuse of the
macro virt_to_pfn() acting polymorphic and accepting many types
such as (void *), (unitptr_t) or (unsigned long) as arguments
without warnings.

Move the virt_to_pfn() and related functions below the
declaration of __pa() so it compiles.

For symmetry do the same with pfn_to_kaddr().

As the file is included right into the linker file, we need
to surround the functions with ifndef __ASSEMBLY__ so we
don't cause compilation errors.

The conversion moreover exposes the fact that pmd_page_vaddr()
was returning an unsigned long rather than a const void * as
could be expected, so all the sites defining pmd_page_vaddr()
had to be augmented as well.

Finally the KVM code in book3s_64_mmu_hv.c was passing an
unsigned int to virt_to_phys() so fix that up with a cast so the
result compiles.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[mpe: Fixup kfence.h, simplify pfn_to_kaddr() & pmd_page_vaddr()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230809-virt-to-phys-powerpc-v1-1-12e912a7d439@linaro.org

powerpc/powernv/pci: use pci_dev_id() to simplify the code

PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it mannually. Use pci_dev_id() to
simplify the code a little bit.

Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230804080435.191196-1-wangxiongfeng2@huawei.com

powerpc/xics: Remove unnecessary endian conversion

Remove an unnecessary piece of code that does an endianness conversion
but does not use the result. The following warning was reported by
Clang's static analyzer:

  arch/powerpc/sysdev/xics/ics-opal.c:114:2: warning: Value stored to
  'server' is never read [deadcode.DeadStores]
  server = be16_to_cpu(oserver);

'server' was used as a parameter to opal_get_xive() in commit
5c7c1e9444d8 ("powerpc/powernv: Add OPAL ICS backend") when it was
introduced. 'server' was also used in an error message for the call to
opal_get_xive().

'server' was always later set by a call to ics_opal_mangle_server()
before being used.

Commit bf8e0f891a32 ("powerpc/powernv: Fix endian issues in OPAL ICS
backend") used a new variable 'oserver' as the parameter to
opal_get_xive() instead of 'server' for endian correctness. It also
removed 'server' from the error message for the call to opal_get_xive().

Fix the warning by removing the server variable assignment.

Fixes: bf8e0f891a32 ("powerpc/powernv: Fix endian issues in OPAL ICS backend")
Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230731115543.36991-1-gautam@linux.ibm.com

powerpc/pseries: fix possible memory leak in ibmebus_bus_init()

If device_register() returns error in ibmebus_bus_init(), name of kobject
which is allocated in dev_set_name() called in device_add() is leaked.

As comment of device_add() says, it should call put_device() to drop
the reference count that was set in device_initialize() when it fails,
so the name can be freed in kobject_cleanup().

Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221110011929.3709774-1-ruanjinjie@huawei.com

powerpc: remove <asm/export.h>

All *.S files under arch/powerpc/ have been converted to include
<linux/export.h> instead of <asm/export.h>.

Remove <asm/export.h>.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230806150954.394189-3-masahiroy@kernel.org

powerpc: replace #include <asm/export.h> with #include <linux/export.h>

Commit ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm/export.h>, which is now a wrapper of <linux/export.h>.

Replace #include <asm/export.h> with #include <linux/export.h>.

After all the <asm/export.h> lines are converted, <asm/export.h> and
<asm-generic/export.h> will be removed.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[mpe: Fixup selftests that stub asm/export.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230806150954.394189-2-masahiroy@kernel.org

powerpc: remove unneeded #include <asm/export.h>

There is no EXPORT_SYMBOL line there, hence #include <asm/export.h>
is unneeded.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230806150954.394189-1-masahiroy@kernel.org

powerpc/inst: add PPC_TLBILX_LPID

Clang didn't recognize the instruction tlbilxlpid. This was fixed in
clang-18 [0] then backported to clang-17 [1].  To support clang-16 and
older, rather than using that instruction bare in inline asm, add it to
ppc-opcode.h and use that macro as is done elsewhere for other
instructions.

Link: https://github.com/ClangBuiltLinux/linux/issues/1891
Link: https://github.com/llvm/llvm-project/issues/64080
Link: https://github.com/llvm/llvm-project/commit/53648ac1d0c953ae6d008864dd2eddb437a92468
Link: https://github.com/llvm/llvm-project-release-prs/commit/0af7e5e54a8c7ac665773ac1ada328713e8338f5
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/llvm/202307211945.TSPcyOhh-lkp@intel.com/
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230803-ppc_tlbilxlpid-v3-1-ca84739bfd73@google.com

cxl: Use pci_find_vsec_capability() to simplify the code

PCI core add pci_find_vsec_capability() to query VSEC. We can use that
core API to simplify the code.

The only logical change is that pci_find_vsec_capability check the
Vendor ID before finding the VSEC.

PCI spec rev 5.0 says in 7.9.5.2 Vendor-Specific Header:
  VSEC ID - This field is a vendor-defined ID number that indicates the
  nature and format of the VSEC structure
  Software must qualify the Vendor ID before interpreting this field.

Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230804075630.186054-1-wangxiongfeng2@huawei.com

powerpc/reg: Remove #ifdef around mtspr macro

That ifdef was introduced by commit 1458dd951f7c ("powerpc/8xx:
Handle CPU6 ERRATA directly in mtspr() macro") and left over by
commit 2a45addd21de ("powerpc/8xx: Remove CPU6 ERRATA Workaround")

Remove it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/cf652e47ea9e453e89813611b6f76d0939a12063.1687344017.git.christophe.leroy@csgroup.eu

powerpc/step: Mark __copy_mem_out() and __emulate_dcbz() __always_inline

objtool reports two folliwng warnings:
  arch/powerpc/lib/sstep.o: warning: objtool: copy_mem_out+0x3c
    (.text+0x30c): call to __copy_mem_out() with UACCESS enabled
  arch/powerpc/lib/sstep.o: warning: objtool: emulate_dcbz+0x70
    (.text+0x4dc): call to __emulate_dcbz() with UACCESS enabled

Mark __copy_mem_out() and __emulate_dcbz() __always_inline

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/f1d4a15da70190f8c2fcddb377bbc1e09827242c.1687343857.git.christophe.leroy@csgroup.eu

powerpc/cpm2: Remove cpm2_map() and cpm2_unmap()

Since commit 449012daa92a ("[POWERPC] cpm2: Infrastructure code
cleanup.") cpm2_map() is just returning cpm2_immr pointer and
cpm2_unmap() does nothing.

We already have parts of code that use cpm2_immr directly so get rid
of cpm2_map() and cpm2_unmap() by using cpm2_immr directly. And avoid
going through local pointers that hide the pointed structure.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/9fe6ff7284e9f968b12abe7de7c08d7ea40e29d6.1691474658.git.christophe.leroy@csgroup.eu

powerpc/8xx: Remove immr_map() and immr_unmap()

Since commit fb533d0c5a97 ("[POWERPC] 8xx: Infrastructure code cleanup.")
immr_map() is just returning mpc8xxx_immr pointer and immr_unmap()
do nothing.

We already have parts of code that use mpc8xxx_immr directly so get rid
of immr_map() and immr_unmap() by using mpc8xxx_immr directly. And avoid
going through local pointers that hide the pointed structure.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/633ed46f6015ff44d5599258647ea517f75d6a1d.1691474658.git.christophe.leroy@csgroup.eu

powerpc: Remove CONFIG_PCI_8260

CONFIG_PCI_8260 is not used anymore, remove it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/19a4c07466ce8b80f287a06eadcc80c4ab1d2c9e.1691474658.git.christophe.leroy@csgroup.eu

powerpc/include: Remove mpc8260.h and m82xx_pci.h

SIU_INT_IRQ1 is not used anywhere and __IO_BASE is defined in
asm/io.h

Remove m82xx_pci.h

Then the only thing remaining in mpc8260.h is MPC82XX_BCR_PLDP

Move MPC82XX_BCR_PLDP into asm/cpm2.h then remove mpc8260.h

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/afe23bf3624c389ff17e9789884c78c124b7b202.1691474658.git.christophe.leroy@csgroup.eu

powerpc/include: Declare mpc8xx_immr in 8xx_immap.h

Do the same as for cmp2_immr : declare it at the same place
as its type immap_t, that is in 8xx_immap.h instead of fs_pd.h

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/62d490b65899c2f2667ca7045c5f0fad9cbda458.1691474658.git.christophe.leroy@csgroup.eu

powerpc/include: Remove unneeded #include <asm/fs_pd.h>

tqm8xx_setup.c and fs_enet.h don't use any items provided by fs_pd.h

Remove unneeded #include <asm/fs_pd.h>

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/b056c4e986a4a7707fc1994304c34f7bd15d6871.1691474658.git.christophe.leroy@csgroup.eu

ocxl: Use pci_dev_id() to simplify the code

PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it mannually. Use pci_dev_id() to
simplify the code a little bit.

Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230811102039.17257-1-zhengzengkai@huawei.com

macintosh/ams: mark ams_init() static

This is the module init function, which by definition is used only
locally, so mark it static to avoid a warning:

drivers/macintosh/ams/ams-core.c:179:12: error: no previous prototype for 'ams_init' [-Werror=missing-prototypes]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230810141947.1236730-7-arnd@kernel.org

powerpc/pseries: PLPKS: undo kernel-doc comment notation

Don't use kernel-doc "/**" comment format for non-kernel-doc comments.
This prevents a kernel-doc warning:

  arch/powerpc/platforms/pseries/plpks.c:186: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
  * Label is combination of label attributes + name.

Fixes: 2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/202308040430.GxmPAnwZ-lkp@intel.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230810000740.23756-1-rdunlap@infradead.org

powerpc/radix: Move some functions into #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE

With skiboot_defconfig, Clang reports:

  CC      arch/powerpc/mm/book3s64/radix_tlb.o
arch/powerpc/mm/book3s64/radix_tlb.c:419:20: error: unused function '_tlbie_pid_lpid' [-Werror,-Wunused-function]
static inline void _tlbie_pid_lpid(unsigned long pid, unsigned long lpid,
                   ^
arch/powerpc/mm/book3s64/radix_tlb.c:663:20: error: unused function '_tlbie_va_range_lpid' [-Werror,-Wunused-function]
static inline void _tlbie_va_range_lpid(unsigned long start, unsigned long end,
                   ^

This is because those functions are only called from functions
enclosed in a #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE

Move below functions inside that #ifdef
* __tlbie_pid_lpid(unsigned long pid,
* __tlbie_va_lpid(unsigned long va, unsigned long pid,
* fixup_tlbie_pid_lpid(unsigned long pid, unsigned long lpid)
* _tlbie_pid_lpid(unsigned long pid, unsigned long lpid,
* fixup_tlbie_va_range_lpid(unsigned long va,
* __tlbie_va_range_lpid(unsigned long start, unsigned long end,
* _tlbie_va_range_lpid(unsigned long start, unsigned long end,

Fixes: f0c6fbbb9050 ("KVM: PPC: Book3S HV: Add support for H_RPT_INVALIDATE")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307260802.Mjr99P5O-lkp@intel.com/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/3d72efd39f986ee939d068af69fdce28bd600766.1691568093.git.christophe.leroy@csgroup.eu

powerpc: xmon: remove unused variables

Randconfig testing with W=1 showed up these warnings that I'd like to enable
by default:

arch/powerpc/xmon/xmon.c: In function 'dump_tlb_book3e':
arch/powerpc/xmon/xmon.c:3833:42: error: variable 'lrat' set but not used [-Werror=unused-but-set-variable]
 3833 |  int i, tlb, ntlbs, pidsz, lpidsz, rasz, lrat = 0;
      |                                          ^~~~
arch/powerpc/xmon/xmon.c:3831:23: error: variable 'lpidmask' set but not used [-Werror=unused-but-set-variable]
 3831 |  u32 mmucfg, pidmask, lpidmask;
      |                       ^~~~~~~~
arch/powerpc/xmon/xmon.c:3831:14: error: variable 'pidmask' set but not used [-Werror=unused-but-set-variable]
 3831 |  u32 mmucfg, pidmask, lpidmask;
      |              ^~~~~~~

Just remove these as they have been unused since the code was added in 2010.

Fixes: 03247157f7391 ("powerpc/book3e: Add TLB dump in xmon for Book3E")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230809131024.2039647-2-arnd@kernel.org

powerpc: mark more local variables as volatile

A while ago I created a2305e3de8193 ("powerpc: mark local variables
around longjmp as volatile") in order to allow building powerpc with
-Wextra enabled on gcc-11.

I tried this again with gcc-13 and found two more of the same issues,
presumably based on slightly different optimization paths being taken
here:

arch/powerpc/xmon/xmon.c:3306:27: error: variable 'mm' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered]
arch/powerpc/kexec/crash.c:353:22: error: variable 'i' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered]

I checked a bunch of randconfigs and found only these two, so just
address them the same way as the others.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230809131024.2039647-1-arnd@kernel.org

powerpc/pmac32: enable serial options by default in defconfig

Serial is a critical feature for logging and debuging, and the other
architectures enable serial by default.

Let's enable CONFIG_SERIAL_PMACZILOG and CONFIG_SERIAL_PMACZILOG_CONSOLE
by default.

Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/bb7b5f9958b3e3a20f6573ff7ce7c5dc566e7e32.1690982937.git.tanyuan@tinylab.org

Merge branch 'topic/cpu-smt' into next

Merge SMT changes we are sharing with the tip tree.

powerpc/pseries: Honour current SMT state when DLPAR onlining CPUs

Integrate with the generic SMT support, so that when a CPU is DLPAR
onlined it is brought up with the correct SMT mode.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230705145143.40545-11-ldufour@linux.ibm.com

powerpc: Add HOTPLUG_SMT support

Add support for HOTPLUG_SMT, which enables the generic sysfs SMT support
files in /sys/devices/system/cpu/smt, as well as the "nosmt" boot
parameter.

Implement the recently added hooks to allow partial SMT states, allow
any number of threads per core.

Tie the config symbol to HOTPLUG_CPU, which enables it on the major
platforms that support SMT. If there are other platforms that want the
SMT support that can be tweaked in future.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[ldufour: remove topology_smt_supported]
[ldufour: remove topology_smt_threads_supported]
[ldufour: select CONFIG_SMT_NUM_THREADS_DYNAMIC]
[ldufour: update kernel-parameters.txt]
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Link: https://msgid.link/20230705145143.40545-10-ldufour@linux.ibm.com

powerpc/pseries: Initialise CPU hotplug callbacks earlier

As part of the generic HOTPLUG_SMT code, there is support for disabling
secondary SMT threads at boot time, by passing "nosmt" on the kernel
command line.

The way that is implemented is the secondary threads are brought partly
online, and then taken back offline again. That is done to support x86
CPUs needing certain initialisation done on all threads. However powerpc
has similar needs, see commit d70a54e2d085 ("powerpc/powernv: Ignore
smt-enabled on Power8 and later").

For that to work the powerpc CPU hotplug callbacks need to be registered
before secondary CPUs are brought online, otherwise __cpu_disable()
fails due to smp_ops->cpu_disable being NULL.

So split the basic initialisation into pseries_cpu_hotplug_init() which
can be called early from setup_arch(). The DLPAR related initialisation
can still be done later, because it needs to do allocations.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230705145143.40545-9-ldufour@linux.ibm.com

Merge tag 'smp-core-for-ppc-23-07-28' of https://git./linux/kernel/git/tip/tip into topic/cpu-smt

SMP core changes for powerpc

powerpc/kexec: fix minor typo

Function name in the descriptor was not correct.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307251721.bUGcsCeQ-lkp@intel.com/
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230725132759.53975-1-ldufour@linux.ibm.com

powerpc/ep8248e: Mark driver as non removable

Instead of resorting to BUG() ensure that the driver isn't unbound by
suppressing its bind and unbind sysfs attributes. As the driver is
built-in there is no way to remove a device once bound.

As a nice side effect this allows to drop the remove function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230726081442.461026-1-u.kleine-koenig@pengutronix.de

powerpc: address missing-prototypes warnings

There are a few warnings in powerpc64 defconfig builds after -Wmissing-prototypes
gets promoted from W=1 to the default warning set:

arch/powerpc/mm/book3s64/pgtable.c:422:6: error: no previous prototype for 'arch_report_meminfo' [-Werror=missing-prototypes]
arch/powerpc/platforms/cell/ras.c:275:5: error: no previous prototype for 'cbe_sysreset_hack' [-Werror=missing-prototypes]
arch/powerpc/platforms/cell/spu_manage.c:29:21: error: no previous prototype for 'spu_devnode' [-Werror=missing-prototypes]
arch/powerpc/platforms/pasemi/time.c:12:17: error: no previous prototype for 'pas_get_boot_time' [-Werror=missing-prototypes]
arch/powerpc/platforms/powermac/feature.c:1532:13: error: no previous prototype for 'g5_phy_disable_cpu1' [-Werror=missing-prototypes]
arch/powerpc/platforms/86xx/pic.c:28:13: error: no previous prototype for 'mpc86xx_init_irq' [-Werror=missing-prototypes]
drivers/pci/pci-sysfs.c:936:13: error: no previous prototype for 'pci_adjust_legacy_attr' [-Werror=missing-prototypes]

Address these by including the right header files or marking the
functions static. The audit.c one is a bit tricky since compat_audit.h
cannot include regular kernel headers tht have conflicting types on
32-bit powerpc.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[mpe: Drop change to __vmemmap_free() which only exists in mm]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230727122720.2558065-1-arnd@kernel.org

selftests/powerpc/ptrace: Declare test temporary variables as volatile

While the target is volatile, the temporary variables used to access the
target cast away the volatile. This is undefined behaviour, and a
compiler may optimise away/reorder these accesses, breaking the test.

This was observed with GCC 13.1.1, but it can be difficult to reproduce
because of the dependency on compiler behaviour.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230725005841.28854-5-bgray@linux.ibm.com

selftests/powerpc/ptrace: Fix typo in pid_max search error

pid_max_addr() searches for the 'pid_max' symbol in /proc/kallsyms, and
prints an error if it cannot find it. The error message has a typo,
calling it pix_max.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230725005841.28854-4-bgray@linux.ibm.com

selftests/powerpc/ptrace: Explain why tests are skipped

Many tests require specific hardware features/configurations that a
typical machine might not have. As a result, it's common to see a test
is skipped. But it is tedious to find out why a test is skipped
when all it gives is the file location of the skip macro.

Convert SKIP_IF() to SKIP_IF_MSG(), with appropriate descriptions of why
the test is being skipped. This gives a general idea of why a test is
skipped, which can be looked into further if it doesn't make sense.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230725005841.28854-3-bgray@linux.ibm.com

powerpc: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
[mpe: Fixup maple/setup.c which needs platform_device]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230724210247.778034-1-robh@kernel.org