Richard Zhao [Thu, 3 Mar 2011 08:40:03 +0000 (16:40 +0800)]
ARM: imx3x: clean up ARCH_MX3X
Move to SOC_SOC_IMX3X.
Leave ARCH_MX31/35 definitions there, in case some place prevent multi-soc
single image.
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Richard Zhao [Thu, 3 Mar 2011 08:40:02 +0000 (16:40 +0800)]
ARM: imx5x: clean up ARCH_MX5X
Move to SOC_SOC_IMX5X. Leave only places which prevent multi-soc
using ARCH_MX5X.
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Wed, 2 Mar 2011 08:27:42 +0000 (09:27 +0100)]
ARM i.MX: introduce imx_otg_ulpi_create to create ULPI transceivers
The boards are currently using otg_ulpi_create and mxc_ulpi_access_ops,
both are only present if CONFIG_USB_ULPI is set. To remove the need of
ifdefs in the board code introduce a imx_otg_ulpi_create functions
which expands to a static inline function if compiled without ulpi.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Wed, 2 Mar 2011 09:10:14 +0000 (10:10 +0100)]
ARM i.MX31 lilly: remove incomplete otg support
The platform data for the otg port is present but never used, so
remove it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Daniel Mack <daniel@caiaq.de>
Sascha Hauer [Thu, 17 Feb 2011 14:08:12 +0000 (15:08 +0100)]
ARM i.MX: iomux v1 initialization away from initcall
This saves us from soc level dispatching in generic files
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Thu, 17 Feb 2011 13:43:48 +0000 (14:43 +0100)]
ARM i.MX: Move gpio initialization to SoC specific files
This saves us from soc level dispatching in generic files
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Gwenhael Goavec-Merou [Wed, 2 Mar 2011 08:11:05 +0000 (08:11 +0000)]
MX1: Add structure, registration functions for framebuffer and rename LCDC INT
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fabio Estevam [Wed, 2 Mar 2011 16:30:53 +0000 (13:30 -0300)]
ARM: mx5/mx53_evk: Fix IOMUX for UART3
On mx53_evk board only RX/TX pins are used on UART3.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fabio Estevam [Wed, 2 Mar 2011 16:30:52 +0000 (13:30 -0300)]
ARM: mx5/mx53_smd: Fix IOMUX for UART2
On mx53_smd board only RX/TX pins are used on UART2.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fabio Estevam [Wed, 2 Mar 2011 14:26:49 +0000 (11:26 -0300)]
ARM: mx3/mx35_3ds: Use MX35 USB OTG Erratum
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Wolfram Sang [Tue, 1 Mar 2011 09:21:51 +0000 (10:21 +0100)]
arm: mxs: add irq_chip-name for GPIO IRQs
Reported-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Fri, 14 Jan 2011 14:32:49 +0000 (15:32 +0100)]
ARM i.MX23/28: Add framebuffer device support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawn.guo@freescale.com>
Sascha Hauer [Fri, 14 Jan 2011 14:22:31 +0000 (15:22 +0100)]
video: Add i.MX23/28 framebuffer driver
changes since v2:
- use v3 and v4 for specifying the ip version instead of i.MX23/28.
This is a better namespace when future versions are added.
- rename mach/fb.h to mach/mxsfb.h
changes since v1:
- Add a LCDC_ prefix to the register names.
- use set/clear registers where appropriate
- protect call to mxsfb_disable_controller() in mxsfb_remove()
with a (host->enabled) as suggested by Lothar Wassmann
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-fbdev@vger.kernel.org
Uwe Kleine-König [Wed, 2 Mar 2011 09:59:49 +0000 (10:59 +0100)]
ARM: mxc91231/iomux: allow pin_list to be const
While at it remove some useless consts from unsigned int arguments.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Uwe Kleine-König [Wed, 2 Mar 2011 09:59:48 +0000 (10:59 +0100)]
ARM: iomux-imx31: allow pin_list to be const
This fixes the following warning in a mx3_defconfig build:
arch/arm/mach-mx3/mach-bug.c: In function 'bug_board_init':
arch/arm/mach-mx3/mach-bug.c:47: warning: passing argument 1 of 'mxc_iomux_setup_multiple_pins' discards qualifiers from pointer target type
While at it remove some useless consts from unsigned int arguments.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fabio Estevam [Tue, 1 Mar 2011 19:59:48 +0000 (16:59 -0300)]
ARM: mx53_smd: Add I2C support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fabio Estevam [Tue, 1 Mar 2011 19:59:47 +0000 (16:59 -0300)]
ARM: mx25_3ds: Add I2C support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fabio Estevam [Tue, 1 Mar 2011 19:59:46 +0000 (16:59 -0300)]
ARM: mx27_3ds: Add I2C support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fabio Estevam [Tue, 1 Mar 2011 19:59:45 +0000 (16:59 -0300)]
ARM: mx31_3ds: Add I2C support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fabio Estevam [Tue, 1 Mar 2011 19:59:44 +0000 (16:59 -0300)]
ARM: mx35_3ds: Add I2C support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Javier Martin [Tue, 1 Mar 2011 14:02:08 +0000 (15:02 +0100)]
ARM: Add SSI and aic3204 code to Visstrim_M10 boards.
Visstrim_M10 boards have an TI tlv320aic3204 codec
attached to SSI1.
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Uwe Kleine-König [Tue, 1 Mar 2011 20:30:58 +0000 (21:30 +0100)]
ARM: mx3/cpuimx35: fix build failure
It seems vim's autocompletion played tricks on me without me noticing.
This was intruduced in
97976e2 (ARM: mx3: use .init_early to initialize cpu type, reset address and iomuxer)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Richard Zhu [Mon, 28 Feb 2011 11:32:02 +0000 (19:32 +0800)]
ARM: imx53_loco: add esdhc device support
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Richard Zhu [Mon, 28 Feb 2011 11:32:03 +0000 (19:32 +0800)]
ARM: imx51/53: add sdhc3/4 clock
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Wolfram Sang [Mon, 28 Feb 2011 16:40:05 +0000 (17:40 +0100)]
arm: mxs: tx28: add i2c bus and connected RTC
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Wolfram Sang [Mon, 28 Feb 2011 16:40:04 +0000 (17:40 +0100)]
arm: mxs: add i2c-devices for mx28
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Gwenhael Goavec-Merou [Wed, 23 Feb 2011 16:58:39 +0000 (16:58 +0000)]
MX1: Add registration functions for SPI.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Gwenhael Goavec-Merou [Wed, 23 Feb 2011 16:58:36 +0000 (16:58 +0000)]
MX1: Add data structure for SPI
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Gwenhael Goavec-Merou [Wed, 23 Feb 2011 16:58:38 +0000 (16:58 +0000)]
MX1: Register clock for SPI2
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Gwenhael Goavec-Merou [Wed, 23 Feb 2011 16:58:37 +0000 (16:58 +0000)]
MX1: Rename SPI interrupt name and base address.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Ryan Lortie [Sun, 27 Feb 2011 00:41:53 +0000 (19:41 -0500)]
ARM: imx35: fix trivial copy/paste error
Change imx31_add_imx_keypad() to imx35_add_imx_keypad() in
mach-mx3/devices-imx35.h.
Signed-off-by: Ryan Lortie <desrt@desrt.ca>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Ryan Lortie [Sun, 27 Feb 2011 00:41:52 +0000 (19:41 -0500)]
ARM: imx35: fix ATA_DATA3 pad control address
According to the "i.MX35 (MCIMX35) Multimedia Applications Processor
Reference Manual" the correct address for the pad control register
IOMUXC_SW_PAD_CTL_PAD_ATA_DATA3 is 0x06ec, not 0x6e8.
Signed-off-by: Ryan Lortie <desrt@desrt.ca>
Acked-by: Marc Reilly <marc@cpdesign.com.au>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Eric Bénard [Fri, 25 Feb 2011 12:49:15 +0000 (13:49 +0100)]
i.MX25: add sdma clock definitions
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Lothar Waßmann [Fri, 10 Dec 2010 15:22:47 +0000 (16:22 +0100)]
ARM: mxs: Initial support for Ka-Ro TX28
Based on code created by Lothar Waßmann, Sascha Hauer, Wolfram Sang and
me.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Sascha Hauer [Wed, 16 Feb 2011 09:46:12 +0000 (10:46 +0100)]
ARM: mxs: Add missing EXPORT_SYMBOL for mxs_reset_block
It is used for example in the i2c driver which can be compiled modular.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Sascha Hauer [Tue, 25 Jan 2011 10:58:15 +0000 (11:58 +0100)]
ARM: mxs: Add pwm clocks and device registration
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Uwe Kleine-König [Wed, 19 Jan 2011 10:37:10 +0000 (11:37 +0100)]
ARM: mxc: add a dma mask to fec devices
This is not strictly necessary but the right thing to do.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Lothar Waßmann [Wed, 15 Dec 2010 21:20:13 +0000 (22:20 +0100)]
ARM: mxs: add a dma mask to fec devices
This is not strictly necessary but the right thing to do.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Uwe Kleine-König [Fri, 18 Feb 2011 20:59:25 +0000 (21:59 +0100)]
ARM: mxc: free dma_mask in error path
This fixes a small memory leak that was only hit in very unlikely error
paths
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Lothar Waßmann [Wed, 15 Dec 2010 21:11:31 +0000 (22:11 +0100)]
ARM: mxs: free dma_mask in error path
This fixes a small memory leak that was only hit in very unlikely error
paths.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Eric Bénard [Fri, 25 Feb 2011 13:38:29 +0000 (14:38 +0100)]
cpuimx51sd: mcp2515 supports up to 10MHz SPI clock
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Eric Bénard [Fri, 25 Feb 2011 14:04:14 +0000 (15:04 +0100)]
cpuimx51sd: fix tsc2007
- wrong MUX was set before for IRQ
- get_pendown_state is no more needed
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Eric Bénard [Fri, 25 Feb 2011 13:38:27 +0000 (14:38 +0100)]
cpuimx51sd: add cpufreq support
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Eric Bénard [Fri, 25 Feb 2011 12:48:15 +0000 (13:48 +0100)]
eukrea-tlv320: add MBIMXSD51 support
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Wolfram Sang [Wed, 23 Feb 2011 13:51:58 +0000 (14:51 +0100)]
arm: mach-mx3: use IMX_GPIO_NR instead of hard-coded values
The latter are error-prone because the bank number is one less than one
would read in the documentation.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Eric Benard <eric@eukrea.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Denis 'GNUtoo' Carikli [Fri, 18 Feb 2011 21:22:23 +0000 (22:22 +0100)]
mx31: add support for the bugbase 1.3 from buglabs
Note that the hardware schematics and documentations can be obtained
here: http://www.bugcommunity.com/wiki/index.php/BUGbase
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Shawn Guo [Wed, 23 Feb 2011 08:06:55 +0000 (16:06 +0800)]
ARM: mx51_defconfig: change CONFIG_LEDS_CLASS 'm' to 'y'
This patch is to fix the warning below.
arch/arm/configs/mx51_defconfig:113:warning: symbol value 'm' invalid for LEDS_CLASS
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fabio Estevam [Tue, 22 Feb 2011 23:24:13 +0000 (20:24 -0300)]
ARM: imx/mach-mx25_3ds: Use IMX_GPIO_NR instead of hard-coded values
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Richard Zhu [Tue, 22 Feb 2011 10:13:22 +0000 (18:13 +0800)]
ARM: imx53: add sdhc pad settings
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Richard Zhao [Fri, 18 Feb 2011 12:26:30 +0000 (20:26 +0800)]
ARM: imx53: correct Silicon Revision definition following fuse map
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Frank Li [Mon, 21 Feb 2011 06:28:10 +0000 (14:28 +0800)]
ARM: imx53_smd add uncompress print
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Richard Zhao [Fri, 18 Feb 2011 04:36:17 +0000 (12:36 +0800)]
ARM: imx50: correct iomux-mx50.h wrong daisy chain settings
Most fix is for uart txd/cts. They don't need to select input.
And fix some other pads with wrong select input.
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Richard Zhao [Fri, 18 Feb 2011 04:36:16 +0000 (12:36 +0800)]
ARM: imx53_loco: add i2c device support
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Richard Zhao [Fri, 18 Feb 2011 04:36:15 +0000 (12:36 +0800)]
ARM: imx53_loco add uncompress print
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Richard Zhao [Fri, 18 Feb 2011 04:36:14 +0000 (12:36 +0800)]
ARM: imx53_loco: add all pad configure.
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fabio Estevam [Thu, 17 Feb 2011 20:09:53 +0000 (18:09 -0200)]
ARM: mach-mx5: Add watchdog support for MX53 based boards
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fabio Estevam [Thu, 17 Feb 2011 20:09:52 +0000 (18:09 -0200)]
ARM: mx5: Add watchdog support for MX53
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Arnaud Patard (Rtp) [Thu, 17 Feb 2011 14:31:32 +0000 (15:31 +0100)]
mx51: add support for efika smartbook
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Arnaud Patard (Rtp) [Thu, 17 Feb 2011 14:31:31 +0000 (15:31 +0100)]
efika: enable cpufreq
Enable cpufreq on Genesi efika platforms
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Arnaud Patard (Rtp) [Thu, 17 Feb 2011 14:31:30 +0000 (15:31 +0100)]
efikamx: add mc13892 support / implement power off
This patch declares regulators for the efikamx. Use it also to power off the
efikamx.
Unfortunately, on the efikamx to2 boards, this doesn't work but they allow to
power off by setting GPIO 4 13 to high level instead of powering off through
the mc13892.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Arnaud Patard (Rtp) [Thu, 17 Feb 2011 14:31:29 +0000 (15:31 +0100)]
efikamx: add usb h1 support
Now that usb has been fixed, we can enable usb h1 on efikamx
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Arnaud Patard (Rtp) [Thu, 17 Feb 2011 14:31:28 +0000 (15:31 +0100)]
Introduce EFIKA_COMMON
The Genesi EFIKA MX and EFIKA Smartbook are sharing a lot of things
so it makes sense to create a common file for both devices and a specific
file for each. No functionnal change except dropping uart 1 & 2.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Shawn Guo [Thu, 17 Feb 2011 06:28:52 +0000 (14:28 +0800)]
ARM: mxs/mx28evk: add auart devices
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Shawn Guo [Thu, 17 Feb 2011 06:28:51 +0000 (14:28 +0800)]
ARM: mxs/mx23evk: add auart device
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Shawn Guo [Thu, 17 Feb 2011 06:28:50 +0000 (14:28 +0800)]
ARM: mx23: dynamically allocate mx23 auart device
i.MX23 Reference Manaul starts auart index from 1 than 0. Changing
the index to start from 0 requires corresponding changes on base
address, irq, and iomux definitions, and will probably confuse people
who reads codes and hardware documents together.
This patch introduced the field 'hwid' to distinguish the driver id
and controller id. These two ids are different on mx23 while
identical on mx28.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Shawn Guo [Thu, 17 Feb 2011 06:28:49 +0000 (14:28 +0800)]
ARM: mx23: rename mx23 auart irq definition to align with mx28
i.MX23 Reference Manual names auart irq differently from i.MX28.
This patch is to align the naming with mx28, so that some device
registration codes can be shared.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Jesper Juhl [Mon, 14 Feb 2011 22:54:00 +0000 (23:54 +0100)]
Freescale STMP37XX/STMP378X Application UART driver: remove duplicate linux/device.h include
Do not include linux/device.h twice in drivers/tty/serial/mxs-auart.c .
Once is enough.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Julien Boibessot [Fri, 11 Feb 2011 14:15:30 +0000 (15:15 +0100)]
i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD & MX51_PAD_USBH1_DATA2__UART2_TXD declarations
Fixes 2 small regressions of recent iomux changes:
- current MX51_PAD_UART2_TXD__UART2_TXD declaration overwrites
IOMUXC_UART2_IPP_UART_RXD_MUX_SELECT_INPUT register (0x09ec) and prevent
UART2 Rx from working properly.
(Tested on my custom i.MX51 board where UART2 is used as console)
- current MX51_PAD_USBH1_DATA2__UART2_TXD declaration also has the same problem.
(Not tested)
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Uwe Kleine-König [Fri, 11 Feb 2011 09:21:09 +0000 (10:21 +0100)]
ARM: mx3/mx31ads: fix comments of irq callbacks
The arguments to these callbacks were changed in
e981a30 (ARM: mx3: irq_data conversion.)
but the comments were not adapted.
Cc: Lennert Buytenhek <buytenh@secretlab.ca>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Uwe Kleine-König [Fri, 11 Feb 2011 09:21:08 +0000 (10:21 +0100)]
ARM: mx3: remove some useless comments
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Uwe Kleine-König [Fri, 11 Feb 2011 09:23:19 +0000 (10:23 +0100)]
ARM: mx3+mx5: rename mxc_board_init to ${machine}_init
mxc_board_init is too generic to be useful. Additionally change some
mxc_timer to ${machine}_timer, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Mon, 3 Jan 2011 10:30:28 +0000 (11:30 +0100)]
ARM i.MX ehci: do ehci init in board specific functions
The mxc-ehci driver calls SoC specific phy initialization right after
calling board specific initialization. To offer greater flexibility for
boards to setup the phy and to get rid of some unnecessary flags in
platform data this patch lets the boards call the SoC specific phy
initialization and remove it from the driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Mon, 3 Jan 2011 09:33:01 +0000 (10:33 +0100)]
ARM i.MX ehci: factor out soc specific functions
Currently we have a mxc_initialize_usb_hw which is called on every
i.MX SoC. This function dispatches the different SoC types, which
is quite ugly. This patch moves the SoC specific USB initialization
to their correspondive mach directories.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer [Fri, 11 Feb 2011 07:32:18 +0000 (08:32 +0100)]
Merge commit 'v2.6.38-rc4' into imx-for-2.6.39
Conflicts:
arch/arm/mach-mxs/clock-mx28.c
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Uwe Kleine-König [Mon, 7 Feb 2011 15:35:22 +0000 (16:35 +0100)]
ARM: mxc91231: use .init_early to initialize cpu type
This used to be done in .map_io which is supposed to only setup the memory
mapping.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Uwe Kleine-König [Mon, 7 Feb 2011 15:35:21 +0000 (16:35 +0100)]
ARM: mx5: use .init_early to initialize cpu type, reset address and iomuxer
This used to be done in .map_io which is supposed to only setup the
memory mapping.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Uwe Kleine-König [Mon, 7 Feb 2011 15:35:20 +0000 (16:35 +0100)]
ARM: mx3: use .init_early to initialize cpu type, reset address and iomuxer
This used to be done in .map_io which is supposed to only setup the
memory mapping.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Uwe Kleine-König [Mon, 7 Feb 2011 15:35:19 +0000 (16:35 +0100)]
ARM: imx: use .init_early to initialize cpu type and reset address
This used to be done in .map_io which is supposed to only setup the
memory mapping.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
David Jander [Thu, 10 Feb 2011 09:59:44 +0000 (10:59 +0100)]
ARM: imx+mx3: convert to mc13xxx MFD
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Uwe Kleine-König [Thu, 10 Feb 2011 09:56:21 +0000 (10:56 +0100)]
ARM: mx3/mx31_3ds: fix compiler warning without CONFIG_USB_ULPI
This fixes:
arch/arm/mach-mx3/mach-mx31_3ds.c:249: warning: 'mx31_3ds_host2_init' defined but not used
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:07:27 +0000 (11:07 +0100)]
ARM: imx/eukrea_mbimx27: fix compile warnings about unused variables
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Linus Torvalds [Tue, 8 Feb 2011 00:03:17 +0000 (16:03 -0800)]
Linux 2.6.38-rc4
Linus Torvalds [Mon, 7 Feb 2011 23:20:11 +0000 (15:20 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
ALSA: AACI: allow writes to MAINCR to take effect
ARM: Update mach-types
ARM: 6652/1: ep93xx: correct the end address of the AC97 memory resource
ARM: mxs/imx28: remove now unused clock lookup "fec.0"
ARM: mxs: fix clock base address missing
ARM: mxs: acknowledge gpio irq
ARM: mach-imx/mach-mx25_3ds: Fix section type
ARM: imx: Add VPR200 and MX51_3DS entries to uncompress.h
ARM i.MX23: use correct register for setting the rate
ARM i.MX23/28: remove secondary field from struct clk. It's unused
ARM i.MX28: use correct register for setting the rate
ARM i.MX28: fix bit operation
Linus Torvalds [Mon, 7 Feb 2011 22:06:18 +0000 (14:06 -0800)]
Merge git://git./linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (33 commits)
Btrfs: Fix page count calculation
btrfs: Drop __exit attribute on btrfs_exit_compress
btrfs: cleanup error handling in btrfs_unlink_inode()
Btrfs: exclude super blocks when we read in block groups
Btrfs: make sure search_bitmap finds something in remove_from_bitmap
btrfs: fix return value check of btrfs_start_transaction()
btrfs: checking NULL or not in some functions
Btrfs: avoid uninit variable warnings in ordered-data.c
Btrfs: catch errors from btrfs_sync_log
Btrfs: make shrink_delalloc a little friendlier
Btrfs: handle no memory properly in prepare_pages
Btrfs: do error checking in btrfs_del_csums
Btrfs: use the global block reserve if we cannot reserve space
Btrfs: do not release more reserved bytes to the global_block_rsv than we need
Btrfs: fix check_path_shared so it returns the right value
btrfs: check return value of btrfs_start_ioctl_transaction() properly
btrfs: fix return value check of btrfs_join_transaction()
fs/btrfs/inode.c: Add missing IS_ERR test
btrfs: fix missing break in switch phrase
btrfs: fix several uncheck memory allocations
...
Linus Torvalds [Mon, 7 Feb 2011 22:05:38 +0000 (14:05 -0800)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Fix hcall tracepoint recursion
powerpc/numa: Fix bug in unmap_cpu_from_node
powerpc/numa: Disable VPHN on dedicated processor partitions
powerpc/numa: Add length when creating OF properties via VPHN
powerpc/numa: Check for all VPHN changes
powerpc/numa: Only use active VPHN count fields
powerpc/pseries: Remove unnecessary variable initializations in numa.c
powerpc/pseries: Fix brace placement in numa.c
powerpc/pseries: Fix typo in VPHN comments
powerpc: Fix some 6xx/7xxx CPU setup functions
powerpc: Pass the right cpu_spec to ->setup_cpu() on 64-bit
powerpc/book3e: Protect complex macro args in mmu-book3e.h
powerpc: Fix pfn_valid() when memory starts at a non-zero address
Linus Torvalds [Mon, 7 Feb 2011 22:05:24 +0000 (14:05 -0800)]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
arm: omap4: panda: remove usb_nop_xceiv_register(v1)
OMAP1: Fix non-working LCD on OMAP310
OMAP3: Devkit8000: Change lcd power pin
omap1: remove duplicated #include
arm: mach-omap2: mux: free allocated memory on error exit
arm: mach-omap2: board-rm680: fix rm680_vemmc regulator constraints
OMAP: PM: SmartReflex: Fix possible null pointer read access
OMAP: PM: SmartReflex: Fix possible memory leak
arm: mach-omap2: voltage: debugfs: fix memory leak
OMAP3: PM: fix save secure RAM to restore MPU power state
OMAP: PM: SmartReflex: Add missing IS_ERR test
Linus Torvalds [Mon, 7 Feb 2011 22:04:43 +0000 (14:04 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, nx: Mark the ACPI resume trampoline code as +x
Tetsuo Handa [Mon, 7 Feb 2011 13:36:16 +0000 (13:36 +0000)]
CRED: Fix memory and refcount leaks upon security_prepare_creds() failure
In prepare_kernel_cred() since 2.6.29, put_cred(new) is called without
assigning new->usage when security_prepare_creds() returned an error. As a
result, memory for new and refcount for new->{user,group_info,tgcred} are
leaked because put_cred(new) won't call __put_cred() unless old->usage == 1.
Fix these leaks by assigning new->usage (and new->subscribers which was added
in 2.6.32) before calling security_prepare_creds().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tetsuo Handa [Mon, 7 Feb 2011 13:36:10 +0000 (13:36 +0000)]
CRED: Fix BUG() upon security_cred_alloc_blank() failure
In cred_alloc_blank() since 2.6.32, abort_creds(new) is called with
new->security == NULL and new->magic == 0 when security_cred_alloc_blank()
returns an error. As a result, BUG() will be triggered if SELinux is enabled
or CONFIG_DEBUG_CREDENTIALS=y.
If CONFIG_DEBUG_CREDENTIALS=y, BUG() is called from __invalid_creds() because
cred->magic == 0. Failing that, BUG() is called from selinux_cred_free()
because selinux_cred_free() is not expecting cred->security == NULL. This does
not affect smack_cred_free(), tomoyo_cred_free() or apparmor_cred_free().
Fix these bugs by
(1) Set new->magic before calling security_cred_alloc_blank().
(2) Handle null cred->security in creds_are_invalid() and selinux_cred_free().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 7 Feb 2011 22:02:06 +0000 (14:02 -0800)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: remove checks for ses->status == CifsExiting
cifs: add check for kmalloc in parse_dacl
cifs: don't send an echo request unless NegProt has been done
cifs: enable signing flag in SMB header when server has it on
cifs: Possible slab memory corruption while updating extended stats (repost)
CIFS: Fix variable types in cifs_iovec_read/write (try #2)
cifs: fix length vs. total_read confusion in cifs_demultiplex_thread
Yan, Zheng [Tue, 18 Jan 2011 05:34:40 +0000 (13:34 +0800)]
Btrfs: Fix page count calculation
take offset of start position into account when calculating page count.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Russell King [Mon, 7 Feb 2011 19:07:10 +0000 (19:07 +0000)]
Merge branch 'fixes'
Jeff Layton [Mon, 7 Feb 2011 13:54:35 +0000 (08:54 -0500)]
cifs: remove checks for ses->status == CifsExiting
ses->status is never set to CifsExiting, so these checks are
always false.
Tested-by: JG <jg@cms.ac>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Russell King [Mon, 7 Feb 2011 15:15:37 +0000 (15:15 +0000)]
Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into fixes
Russell King [Sat, 5 Feb 2011 10:41:55 +0000 (10:41 +0000)]
ALSA: AACI: allow writes to MAINCR to take effect
The AACI TRM requires the MAINCR enable bit to be held zero for two
bitclk cycles plus three apb_pclk cycles. Use a delay of 1us to
ensure this.
Ensure that writes to MAINCR to change the addressed codec only happen
when required, and that they take effect in a similar manner to the
above, otherwise we seem to occasionally have stuck slot busy bits.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Mon, 7 Feb 2011 08:59:29 +0000 (08:59 +0000)]
ARM: Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
H. Peter Anvin [Mon, 7 Feb 2011 05:16:09 +0000 (21:16 -0800)]
x86, nx: Mark the ACPI resume trampoline code as +x
We reserve lowmem for the things that need it, like the ACPI
wakeup code, way early to guarantee availability. This happens
before we set up the proper pagetables, so set_memory_x() has no
effect.
Until we have a better solution, use an initcall to mark the
wakeup code executable.
Originally-by: Matthieu Castet <castet.matthieu@free.fr>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Matthias Hopf <mhopf@suse.de>
Cc: rjw@sisk.pl
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <
4D4F8019.2090104@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Anton Blanchard [Thu, 21 Oct 2010 00:52:12 +0000 (00:52 +0000)]
powerpc: Fix hcall tracepoint recursion
Spinlocks on shared processor partitions use H_YIELD to notify the
hypervisor we are waiting on another virtual CPU. Unfortunately this means
the hcall tracepoints can recurse.
The patch below adds a percpu depth and checks it on both the entry and
exit hcall tracepoints.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: stable@kernel.org
Anton Blanchard [Sat, 29 Jan 2011 12:37:16 +0000 (12:37 +0000)]
powerpc/numa: Fix bug in unmap_cpu_from_node
When converting to the new cpumask code I screwed up:
- if (cpu_isset(cpu, numa_cpumask_lookup_table[node])) {
- cpu_clear(cpu, numa_cpumask_lookup_table[node]);
+ if (cpumask_test_cpu(cpu, node_to_cpumask_map[node])) {
+ cpumask_set_cpu(cpu, node_to_cpumask_map[node]);
This was introduced in commit
25863de07af9 (powerpc/cpumask: Convert NUMA code
to new cpumask API)
Fix it.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: <stable@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Anton Blanchard [Sat, 29 Jan 2011 12:35:22 +0000 (12:35 +0000)]
powerpc/numa: Disable VPHN on dedicated processor partitions
There is no need to start up the timer and monitor topology changes on a
dedicated processor partition, so disable it.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
projects / platform / kernel / linux-rpi.git / log