Sebastian Dröge [Thu, 30 Jan 2014 20:24:21 +0000 (21:24 +0100)]
tools: Support non-ASCII tags
By calling setlocale() to get us multi-byte/UTF-8 support.
https://bugzilla.gnome.org/show_bug.cgi?id=723164
Thiago Santos [Thu, 30 Jan 2014 06:22:56 +0000 (03:22 -0300)]
outputselector: respect the 'negotiation-mode' property
If the segment event is allowed to be pushed to all pads it
will lead to an assertion of 'sticky event misordering:
segment received before caps' in case the pad-negotiation-mode
is set to 'active' or 'none'.
This patch fixes this by making all sticky events follow the
property like the caps event to prevent misordering warnings.
When a new pad is activated the current sticky events on the
sinkpad are forwarded to it in the proper order.
https://bugzilla.gnome.org/show_bug.cgi?id=723266
Stefan Sauer [Thu, 30 Jan 2014 11:54:20 +0000 (12:54 +0100)]
poolstress: print speedup
Stefan Sauer [Thu, 30 Jan 2014 11:42:02 +0000 (12:42 +0100)]
bufferpool: misc cleanups
Review the documentation, comments and logging. Set the initial size to 16 as
the size is rounded up to the next power of two anyway.
Stefan Sauer [Thu, 30 Jan 2014 07:11:12 +0000 (08:11 +0100)]
bufferpool: add a new testsuite or the pool
Start with some basic tests.
Wim Taymans [Thu, 30 Jan 2014 11:26:05 +0000 (12:26 +0100)]
bufferpool: avoid excessive GstPoll activity
Keep an extra write ref on the control socket. This ensures that we
avoid a read/write on the socket when going from non-empty->empty->not-empty.
We remove the write ref only when we actually are empty and we need to
wait for flushing or a new buffer.
This makes the bufferpool benchmark about 30% faster than the pure
malloc implementation.
Wim Taymans [Thu, 30 Jan 2014 11:25:33 +0000 (12:25 +0100)]
poll: improve debug
Add object pointer in debug lines.
Edward Hervey [Thu, 30 Jan 2014 09:43:36 +0000 (10:43 +0100)]
Automatic update of common submodule
From d48bed3 to 1a07da9
Stefan Sauer [Wed, 29 Jan 2014 21:46:48 +0000 (22:46 +0100)]
part-toc: emphasize that the later chapters are design draft ideas
Stefan Sauer [Wed, 29 Jan 2014 19:20:56 +0000 (20:20 +0100)]
part-toc: add format specific information
Stefan Sauer [Wed, 29 Jan 2014 17:21:34 +0000 (18:21 +0100)]
poolstress: code cleanups
Add a few comments. Tell in the results, which number are from which test.
Nicola Murino [Wed, 29 Jan 2014 12:20:19 +0000 (13:20 +0100)]
gst-uninstalled: use print as function
https://bugzilla.gnome.org/show_bug.cgi?id=723229
Thiago Santos [Tue, 28 Jan 2014 14:58:53 +0000 (11:58 -0300)]
tests: capsfilter: add test for pending_events pushing
make sure that pending events are pushed when caps are already
set when a buffer is received
Thiago Santos [Tue, 28 Jan 2014 14:12:56 +0000 (11:12 -0300)]
capsfilter: do not forget to push pending events
Push pending events before buffers if caps is already
set
Arnaud Vrac [Fri, 24 Jan 2014 18:19:08 +0000 (19:19 +0100)]
multiqueue: do not reduce single queue below current level
When the single queue size was just bumped by 1 to allow more buffers to
be added, the buffers limit could be reduced to the current level when
setting the max-size-buffers property. This would result in a stall
since the queue would not grow anymore at this point.
Prevent this by not reducing a single queue size below the current
number of buffers + 1.
https://bugzilla.gnome.org/show_bug.cgi?id=712597
Thiago Santos [Fri, 24 Jan 2014 16:20:49 +0000 (13:20 -0300)]
basesrc: do not forget to clear the forced_eos flag
otherwise it will always use the seqnum of the event
sent by the application
Thiago Santos [Thu, 23 Jan 2014 18:52:51 +0000 (15:52 -0300)]
basesrc: preserve seqnum of eos events sent by the user
Store the eos event seqnum and use it when creating the
new eos event to be pushed downstream. To know if the eos
was caused by the eos events received on send_event, a
'forced_eos' flag is used to use the correct seqnum on
the event pushed downstream.
Useful if the application wants to check if the EOS message
was generated from its own pushed EOS or from another source
(stream really finished).
Also adds a test for this
https://bugzilla.gnome.org/show_bug.cgi?id=722791
Thiago Santos [Thu, 23 Jan 2014 18:34:27 +0000 (15:34 -0300)]
docs: design: add part-seqnums
Hopefully clarifies how seqnums should be used and copied from
events to events/messages when those are handled.
https://bugzilla.gnome.org/show_bug.cgi?id=722791
Sebastian Dröge [Fri, 24 Jan 2014 08:28:05 +0000 (09:28 +0100)]
multiqueue: Break the loop immediately if we found an empty queue
No need to continue looking at all the others
Per x Johansson [Thu, 23 Jan 2014 14:47:23 +0000 (15:47 +0100)]
multiqueue: Allow growing a queue if all other queues are not linked
In the case where one singlequeue is full and all other are not linked, the
growing of the full queue does not work correctly. The result depends on if
the full queue is last in the queue list or not.
https://bugzilla.gnome.org/show_bug.cgi?id=722891
Sebastian Dröge [Wed, 22 Jan 2014 10:10:01 +0000 (11:10 +0100)]
pad: Minor code cleanup
!check_sticky()==GST_FLOW_OK is a bit confusing, compared to
check_sticky()!=GST_FLOW_OK.
Fabian Kirsch [Mon, 20 Jan 2014 14:26:54 +0000 (15:26 +0100)]
parse: Additional tests for parser
https://bugzilla.gnome.org/show_bug.cgi?id=710034
Sebastian Dröge [Sat, 18 Jan 2014 13:48:35 +0000 (14:48 +0100)]
iterator: Properly copy mutexes around when creating a copy of a filter iterator
Sebastian Dröge [Sat, 18 Jan 2014 13:34:45 +0000 (14:34 +0100)]
iterator: Add unit tests for filtering, recursive filtering and locking
https://bugzilla.gnome.org/show_bug.cgi?id=711138
Stewart Brodie [Sat, 18 Jan 2014 13:43:20 +0000 (14:43 +0100)]
iterator: Preserve the master lock when creating recursive iterator filters with the same lock
This way we make sure that a) the lock is always taken when checking
the cookie and calling the iterator's next functions and b) it is
not taken while calling any of the iterator filter functions.
https://bugzilla.gnome.org/show_bug.cgi?id=711138
Thiago Santos [Sat, 18 Jan 2014 01:53:01 +0000 (22:53 -0300)]
pad: fix sticky event leak after sticky_events_foreach
events_foreach adds an extra ref when giving the event to the
user function. In case it was unrefed by the user, this extra ref
disappeared, but events_foreach still should unref again to
lose its own ref before removing the event from the array.
https://bugzilla.gnome.org/show_bug.cgi?id=722467
Stefan Sauer [Thu, 16 Jan 2014 19:11:03 +0000 (20:11 +0100)]
info: move some env-var checks from gst to gstinfo as well
We were doing some log related initialisation in gst.c after calling
_priv_gst_debug_init(). Just move it there for consistency.
Sebastian Dröge [Thu, 16 Jan 2014 17:16:35 +0000 (18:16 +0100)]
capsfilter: Only set caps on the srcpad if it's activated in push mode
https://bugzilla.gnome.org/show_bug.cgi?id=722289
Fabian Kirsch [Thu, 16 Jan 2014 11:28:47 +0000 (12:28 +0100)]
parse: Some minor fixes
Fix destructor segfaulting
Expect 0 grammar-ambiguities
Fix order of bin-properties assignment
https://bugzilla.gnome.org/show_bug.cgi?id=710034
Thiago Santos [Wed, 15 Jan 2014 22:28:01 +0000 (19:28 -0300)]
inputselector: removing duplicate field position
It is already stored inside the GstSegment struct and
was only duplicating information. Also removed some
weird positon if/else that would possibly change the
segment that was going to be pushed downstream
Thiago Santos [Wed, 15 Jan 2014 03:12:26 +0000 (00:12 -0300)]
multiqueue: prevent buffering forever with playbin
When prerolling/buffering, multiqueue has its buffers limit set
to 0, this means it can take an infinite amount of buffers.
When prerolling/buffering finishes, its limit is set back to 5, but
only if the current level is lower than 5. It should (almost) never be
and this will cause prerolling/buffering to need to wait to reach the
hard bytes and time limits, which are much higher.
This can lead to a very long startup time. This patch fixes this
by setting the single queues to the max(current, new_value) instead
of simply ignoring the new value and letting it as infinite(0)
https://bugzilla.gnome.org/show_bug.cgi?id=712597
Sebastian Dröge [Wed, 15 Jan 2014 10:12:08 +0000 (11:12 +0100)]
segment: gst_segment_offset_running_time() will be available in 1.2.3
Nicolas Dufresne [Tue, 14 Jan 2014 21:15:21 +0000 (16:15 -0500)]
doc: Update sections with the new rounding macros
Nicolas Dufresne [Tue, 14 Jan 2014 21:15:02 +0000 (16:15 -0500)]
util: Add GST_ROUND_UP_N and GST_ROUND_DOWN_N
These are generic rounding macro that works for any power of two.
Sebastian Dröge [Tue, 14 Jan 2014 15:47:38 +0000 (16:47 +0100)]
tee: Add unit test for requesting pad names
Sebastian Dröge [Tue, 14 Jan 2014 15:45:53 +0000 (16:45 +0100)]
tee: Make sure to give pads the name that was requested
Also check for uniqueness and make sure we create a new
pad index properly if some were requested with names but
the new one is not.
Sebastian Dröge [Tue, 14 Jan 2014 14:52:26 +0000 (15:52 +0100)]
parse: Make sure to create and link chains in the order as written
Make this work again:
audiotestsrc ! tee name=t t.src_0 ! queue ! fakesink t.src_1 ! queue ! fakesink
and this fail again:
audiotestsrc ! tee name=t t.src_1 ! queue ! fakesink t.src_0 ! queue ! fakesink
as tee just counts itself and does not care about the pad names we request
from it.
Sebastian Dröge [Tue, 14 Jan 2014 12:45:34 +0000 (13:45 +0100)]
parse: Remove some C99-style comments
Sebastian Dröge [Tue, 14 Jan 2014 12:44:11 +0000 (13:44 +0100)]
parse: Use GSlice for allocating and freeing links and chains
Sebastian Dröge [Tue, 14 Jan 2014 12:42:20 +0000 (13:42 +0100)]
parse: Add comment about why we disable the "tracing"
It did not print anything useful before anyway, everything
was commented out.
Also remove some unneeded struct members.
Sebastian Dröge [Tue, 14 Jan 2014 12:36:24 +0000 (13:36 +0100)]
parse-launch: Add some more failing pipelines
Also convert some comments about valgrind warnings to
FIXME comments. These were leaking since some time already.
Fabian Kirsch [Fri, 10 Jan 2014 20:10:17 +0000 (21:10 +0100)]
parse: Refactor grammar, make it more consistent and fix conflicts
https://bugzilla.gnome.org/show_bug.cgi?id=710034
Stefan Sauer [Mon, 13 Jan 2014 19:48:32 +0000 (20:48 +0100)]
docs: ensure GstBufferPools shows up as with GObject features
GstBufferPool is a GstObject, add the _get_type function to the types file.
Thiago Santos [Mon, 13 Jan 2014 11:37:37 +0000 (08:37 -0300)]
tests: baseparse: add test for reverse playback on passthrough
Baseparse stores buffers for reverse playback to push on the next
DISCONT, the issue was that it wouldn't ever check for a discont
on passthrough mode as it skips all real parsing. This test
was create to verify this issue and prevent it from happening again
https://bugzilla.gnome.org/show_bug.cgi?id=721941
Thiago Santos [Sat, 11 Jan 2014 13:49:17 +0000 (10:49 -0300)]
tests: baseparse: add basic test for baseparse
Just a small test to check that basic playback works
Thiago Santos [Fri, 10 Jan 2014 12:10:06 +0000 (09:10 -0300)]
baseparse: do not accumulate buffers on passthrough mode
If on passthrough during reverse playback, do not accumulate buffers as
baseparse will never check for DISCONT flag to push those buffers.
So just push buffers downstream as if it was forward playback.
https://bugzilla.gnome.org/show_bug.cgi?id=721941
Stefan Sauer [Mon, 6 Jan 2014 20:47:22 +0000 (21:47 +0100)]
basesrc: don't confuse GST_PAD_MODE_NONE and PULL
Use a switch-case to explicitly handle all pad-modes. This way we don't log an error when the pad is not yet activated.
Stefan Sauer [Thu, 9 Jan 2014 06:56:55 +0000 (07:56 +0100)]
gstobject: add FIXME and docs for the disabled notify on parent
We haven't found a way to re-enable emitting notify and deep-notify for parent
changes. Add a FIXME-2.0 and a doc blob on the property. See #693281.
Thiago Santos [Wed, 8 Jan 2014 19:28:54 +0000 (16:28 -0300)]
baseparse: do not ignore TIME segments
TIME segments are being ignored and a standard initialized
segment is used instead. This causes issues as not properly detecting
reverse playback or not cliping output based on the segment.
This seems to be a regression from one of the GstSegment/GstEvent
redesigns on the 0.10 -> 1.0 transition
Wim Taymans [Wed, 8 Jan 2014 14:47:10 +0000 (15:47 +0100)]
tests: improve check, also check stream-time
Wim Taymans [Wed, 8 Jan 2014 14:31:28 +0000 (15:31 +0100)]
tests: add unit test for segment _offset_running_time()
Add a unit test to check that positive and negative offsets are applied
correctly in various cases.
Wim Taymans [Wed, 8 Jan 2014 14:23:00 +0000 (15:23 +0100)]
segment: take offset into account in _to_position()
Take the offset into account when converting between running-time and
segment positions.
Wim Taymans [Wed, 8 Jan 2014 13:57:04 +0000 (14:57 +0100)]
pad: use new segment offset method to apply the offset
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=721422
Wim Taymans [Wed, 8 Jan 2014 13:54:47 +0000 (14:54 +0100)]
segment: add method to offset the segment running-time
Add a method that can apply an offset to the calculated running-time of
a segment.
Wim Taymans [Wed, 8 Jan 2014 13:52:04 +0000 (14:52 +0100)]
collectpads: take offset into account for expected segment position
The firt valid segment position is start + offset.
Also add some more debug and a FIXME
Wim Taymans [Wed, 8 Jan 2014 13:50:29 +0000 (14:50 +0100)]
info: debug segment offset field as well
Sebastian Dröge [Wed, 8 Jan 2014 08:53:09 +0000 (09:53 +0100)]
multiqueue: Allow growing a queue if all other queues are not linked
See https://bugzilla.gnome.org/show_bug.cgi?id=719893
Wim Taymans [Tue, 7 Jan 2014 15:18:37 +0000 (16:18 +0100)]
filesrc: don't try to seek to -1 offset
The offset can be -1 when we are configured in TIME format. Instead of
failing the seek and erroring, do what and offset of -1 is supposed to
do and simply read from the current offset.
Stefan Sauer [Mon, 6 Jan 2014 20:04:32 +0000 (21:04 +0100)]
basesrc: demote error to warning
This is not an error. A subclass returning FALSE for is_seekable() is one way of
saying that we can't operate in pull mode.
YanpingZhang [Fri, 3 Jan 2014 03:47:23 +0000 (11:47 +0800)]
multiqueue: Fix hanging if shut down while handling a serialized query
https://bugzilla.gnome.org/show_bug.cgi?id=721253
Thiago Santos [Thu, 2 Jan 2014 19:22:37 +0000 (16:22 -0300)]
baseparse: remove pending_segment as it was being misused
It wasn't required, instead baseparse was using it to check the media
caps to identify if it was handling audio or video.
The pending_segment was removed and a checked_media boolean
replaced it for a more accurate naming.
https://bugzilla.gnome.org/show_bug.cgi?id=721350
Thiago Santos [Thu, 2 Jan 2014 16:43:54 +0000 (13:43 -0300)]
baseparse: push pending events before GAP event
A GAP event is handled as an empty buffer by sinks and they expect
to receive start up events before GAP events (like a segment).
This is important specially if there is a GAP at the beginning of
a stream (before any buffers) so that the segment event can be
pushed downstream before the GAP
https://bugzilla.gnome.org/show_bug.cgi?id=721350
Thiago Santos [Thu, 2 Jan 2014 16:41:25 +0000 (13:41 -0300)]
baseparse: refactor pending events pushing
Refactor code repeated 3 times to a common function
https://bugzilla.gnome.org/show_bug.cgi?id=721350
Stefan Sauer [Thu, 2 Jan 2014 19:17:58 +0000 (20:17 +0100)]
design/part-toc.txt: update design docs
Sebastian Dröge [Thu, 2 Jan 2014 12:34:52 +0000 (13:34 +0100)]
pad: Add unit test for adding/removing blocking probes while a pad is blocked
And make sure that these new probes are actually called if they should
instead of silently blocking the pad forever.
https://bugzilla.gnome.org/show_bug.cgi?id=721289
Sebastian Dröge [Thu, 2 Jan 2014 12:33:20 +0000 (13:33 +0100)]
pad: Check if new probes need to be called when adding/removing some
This allows blocking a pad, add a new blocking probe, removing
the first probe and then having the second probe called. Which
could then decide that data-flow should actually continue
instead of blocking now.
https://bugzilla.gnome.org/show_bug.cgi?id=721289
Sebastian Dröge [Thu, 2 Jan 2014 10:13:27 +0000 (11:13 +0100)]
tee: Remove dyn lock
It was used for pad-alloc in 0.10 but currently is completely unused
and not necessary. All pad access is protected by the tee object lock
and keeping another reference to the current pad.
Sebastian Dröge [Thu, 2 Jan 2014 10:09:59 +0000 (11:09 +0100)]
tee: Keep another ref to our one and only srcpad around while pushing
A pad probe on that pad might otherwise just release the pad, drop
the last reference and cause great misery.
https://bugzilla.gnome.org/show_bug.cgi?id=721300
Sebastian Dröge [Mon, 30 Dec 2013 18:03:22 +0000 (19:03 +0100)]
pad: Keep an extra ref of the pad when calling an IDLE probe immediately
The callback might destroy the pad.
Sebastian Dröge [Mon, 30 Dec 2013 17:44:24 +0000 (18:44 +0100)]
pad: Only call IDLE probes if we are actually idle
Also only check the data types for non-IDLE probes. When we
are idle, we have no data type obviously.
Previously we were calling IDLE probes during data flow whenever
a non-blocking probe would be called. The pad was usually not idle
at that time.
Tim-Philipp Müller [Mon, 30 Dec 2013 16:10:08 +0000 (16:10 +0000)]
nettimeprovider: remove unnecessary NULL check
Error is never NULL when we break out of the loop.
COVERITY CID 1037151
Tim-Philipp Müller [Mon, 30 Dec 2013 16:05:47 +0000 (16:05 +0000)]
Revert "nettimeprovider: Remove dead code"
This reverts commit
9649cd4ca19a75d0319117a77a7609e4b8c96533.
This is not right, and it's also not what coverity
is complaining about.
Edward Hervey [Mon, 30 Dec 2013 15:47:32 +0000 (16:47 +0100)]
queue: Remove unneeded checks
item is guaranteed to be non-null.
COVERITY CID 1037152
COVERITY CID 1037153
Edward Hervey [Mon, 30 Dec 2013 15:34:08 +0000 (16:34 +0100)]
nettimeprovider: Remove dead code
err is always NULL by the point we reach this line
COVERITY CID 1037151
Stefan Sauer [Mon, 30 Dec 2013 13:47:19 +0000 (14:47 +0100)]
taglist: fix since marker again (1.3 -> 1.4)
Since markers should point to the appropriate stable version.
Stefan Sauer [Mon, 30 Dec 2013 13:40:40 +0000 (14:40 +0100)]
taglist: fix since-marker in docs (we're in 1.3.X)
Stefan Sauer [Mon, 30 Dec 2013 13:22:37 +0000 (14:22 +0100)]
taglist: add a tag for midi base note numbers
Audio files containing sampled instruments can have metadata describing the note
that was played on the instrument.
Sebastian Dröge [Mon, 30 Dec 2013 09:01:39 +0000 (10:01 +0100)]
pad: Don't ignore probe callback return value when immediately calling IDLE probe
https://bugzilla.gnome.org/show_bug.cgi?id=721096
Pedro Côrte-Real [Sun, 29 Dec 2013 14:06:55 +0000 (14:06 +0000)]
scripts: git-update.sh: fix for non-master branches
Pull from tracking branch instead of origin/master, so
that this works with e.g. 1.2 as well.
Sebastian Dröge [Fri, 27 Dec 2013 11:55:02 +0000 (12:55 +0100)]
parse: Use GLib malloc/free/realloc functions
https://bugzilla.gnome.org/show_bug.cgi?id=720100
Tim-Philipp Müller [Thu, 26 Dec 2013 12:16:26 +0000 (12:16 +0000)]
scripts: create-uninstalled-setup: re-use existing master branch if it exists
When creating separate checkout for non-master branches.
Erik Andresen [Thu, 26 Dec 2013 10:39:27 +0000 (11:39 +0100)]
docs: fix memory leak of appsink example in manual
https://bugzilla.gnome.org/show_bug.cgi?id=721076
Tim-Philipp Müller [Sun, 22 Dec 2013 22:33:12 +0000 (22:33 +0000)]
Automatic update of common submodule
From dbedaa0 to d48bed3
Tim-Philipp Müller [Sun, 22 Dec 2013 22:04:37 +0000 (22:04 +0000)]
po: update for string changes
Tim-Philipp Müller [Sun, 22 Dec 2013 21:56:03 +0000 (21:56 +0000)]
po: set gettext domain in Makevars so we don't have to patch the generated Makefile.in.in
https://bugzilla.gnome.org/show_bug.cgi?id=705455
Wim Taymans [Fri, 20 Dec 2013 13:41:06 +0000 (14:41 +0100)]
utils: Add round down 128 macro for completeness
Nicolas Dufresne [Wed, 13 Nov 2013 22:06:23 +0000 (17:06 -0500)]
utils: Add round up 128 macro
Sebastian Dröge [Fri, 20 Dec 2013 13:30:22 +0000 (14:30 +0100)]
funnel: Setting the PROXY_CAPS flag on the srcpad does not make much sense
funnel outputs whatever one of the upstreams currently outputs, a caps
query to a random upstream does not give the right answer here.
Sebastian Dröge [Fri, 20 Dec 2013 10:37:53 +0000 (11:37 +0100)]
funnel: Proxy CAPS and ALLOCATION queries
Thiago Santos [Mon, 18 Nov 2013 13:46:00 +0000 (10:46 -0300)]
multiqueue: post 100% buffering if single queue is not linked
This makes buffering stop in case a stream switch happens. This is
important for adaptive streams that can disable not-linked streams
to avoid consuming the network bandwidth.
https://bugzilla.gnome.org/show_bug.cgi?id=719575
William Jon McCann [Wed, 18 Dec 2013 10:19:46 +0000 (05:19 -0500)]
docs: fix project links
https://bugzilla.gnome.org/show_bug.cgi?id=720665
David Svensson Fors [Tue, 10 Dec 2013 14:53:54 +0000 (15:53 +0100)]
basesrc: use segment start if DTS for first buffer is unset
https://bugzilla.gnome.org/show_bug.cgi?id=720199
Matthieu Bouron [Thu, 12 Dec 2013 17:17:40 +0000 (17:17 +0000)]
gst-uninstalled: add gstreamer-vaapi paths
https://bugzilla.gnome.org/show_bug.cgi?id=720337
Tim-Philipp Müller [Sat, 14 Dec 2013 21:20:45 +0000 (21:20 +0000)]
tests: add unit test for bitreader, bytereader and bytewriter with no inlining used
Tim-Philipp Müller [Sat, 14 Dec 2013 18:38:41 +0000 (18:38 +0000)]
bytereader: add inline variant of gst_byte_reader_init()
Tim-Philipp Müller [Sat, 14 Dec 2013 18:31:38 +0000 (18:31 +0000)]
docs: fix docs for gst_queue_array_peek_head()
Sebastian Dröge [Sat, 14 Dec 2013 18:08:35 +0000 (19:08 +0100)]
parse: Don't define yyscan_t twice
https://bugzilla.gnome.org/show_bug.cgi?id=720316
Tim-Philipp Müller [Fri, 13 Dec 2013 22:51:32 +0000 (22:51 +0000)]
docs: moving plugins: minor 0.10 -> 1.0 fix
Spotted by Jay Fenlason
Wim Taymans [Wed, 11 Dec 2013 13:42:34 +0000 (14:42 +0100)]
queue: don't ignore event return value
Pass the event return value upstream.
Remove strange goto construct.
Edward Hervey [Tue, 10 Dec 2013 23:30:03 +0000 (18:30 -0500)]
gst-launch: Handle taglist copy failure
If we couldn't copy the tags, just return instead of trying to use bogus
values.