Roman Penyaev [Tue, 5 Mar 2019 23:43:20 +0000 (15:43 -0800)]
mm/vmalloc: fix size check for remap_vmalloc_range_partial()
commit
401592d2e095947344e10ec0623adbcd58934dd4 upstream.
When VM_NO_GUARD is not set area->size includes adjacent guard page,
thus for correct size checking get_vm_area_size() should be used, but
not area->size.
This fixes possible kernel oops when userspace tries to mmap an area on
1 page bigger than was allocated by vmalloc_user() call: the size check
inside remap_vmalloc_range_partial() accounts non-existing guard page
also, so check successfully passes but vmalloc_to_page() returns NULL
(guard page does not physically exist).
The following code pattern example should trigger an oops:
static int oops_mmap(struct file *file, struct vm_area_struct *vma)
{
void *mem;
mem = vmalloc_user(4096);
BUG_ON(!mem);
/* Do not care about mem leak */
return remap_vmalloc_range(vma, mem, 0);
}
And userspace simply mmaps size + PAGE_SIZE:
mmap(NULL, 8192, PROT_WRITE|PROT_READ, MAP_PRIVATE, fd, 0);
Possible candidates for oops which do not have any explicit size
checks:
*** drivers/media/usb/stkwebcam/stk-webcam.c:
v4l_stk_mmap[789] ret = remap_vmalloc_range(vma, sbuf->buffer, 0);
Or the following one:
*** drivers/video/fbdev/core/fbmem.c
static int
fb_mmap(struct file *file, struct vm_area_struct * vma)
...
res = fb->fb_mmap(info, vma);
Where fb_mmap callback calls remap_vmalloc_range() directly without any
explicit checks:
*** drivers/video/fbdev/vfb.c
static int vfb_mmap(struct fb_info *info,
struct vm_area_struct *vma)
{
return remap_vmalloc_range(vma, (void *)info->fix.smem_start, vma->vm_pgoff);
}
Link: http://lkml.kernel.org/r/20190103145954.16942-2-rpenyaev@suse.de
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Joe Perches <joe@perches.com>
Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zhongjiang [Tue, 5 Mar 2019 23:41:16 +0000 (15:41 -0800)]
mm: hwpoison: fix thp split handing in soft_offline_in_use_page()
commit
46612b751c4941c5c0472ddf04027e877ae5990f upstream.
When soft_offline_in_use_page() runs on a thp tail page after pmd is
split, we trigger the following VM_BUG_ON_PAGE():
Memory failure: 0x3755ff: non anonymous thp
__get_any_page: 0x3755ff: unknown zero refcount page type
2fffff80000000
Soft offlining pfn 0x34d805 at process virtual address 0x20fff000
page:
ffffea000d360140 count:0 mapcount:0 mapping:
0000000000000000 index:0x1
flags: 0x2fffff80000000()
raw:
002fffff80000000 ffffea000d360108 ffffea000d360188 0000000000000000
raw:
0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0)
------------[ cut here ]------------
kernel BUG at ./include/linux/mm.h:519!
soft_offline_in_use_page() passed refcount and page lock from tail page
to head page, which is not needed because we can pass any subpage to
split_huge_page().
Naoya had fixed a similar issue in
c3901e722b29 ("mm: hwpoison: fix thp
split handling in memory_failure()"). But he missed fixing soft
offline.
Link: http://lkml.kernel.org/r/1551452476-24000-1-git-send-email-zhongjiang@huawei.com
Fixes:
61f5d698cc97 ("mm: re-enable THP")
Signed-off-by: zhongjiang <zhongjiang@huawei.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Phuong Nguyen [Thu, 17 Jan 2019 08:44:17 +0000 (17:44 +0900)]
dmaengine: usb-dmac: Make DMAC system sleep callbacks explicit
commit
d9140a0da4a230a03426d175145989667758aa6a upstream.
This commit fixes the issue that USB-DMAC hangs silently after system
resumes on R-Car Gen3 hence renesas_usbhs will not work correctly
when using USB-DMAC for bulk transfer e.g. ethernet or serial
gadgets.
The issue can be reproduced by these steps:
1. modprobe g_serial
2. Suspend and resume system.
3. connect a usb cable to host side
4. Transfer data from Host to Target
5. cat /dev/ttyGS0 (Target side)
6. echo "test" > /dev/ttyACM0 (Host side)
The 'cat' will not result anything. However, system still can work
normally.
Currently, USB-DMAC driver does not have system sleep callbacks hence
this driver relies on the PM core to force runtime suspend/resume to
suspend and reinitialize USB-DMAC during system resume. After
the commit
17218e0092f8 ("PM / genpd: Stop/start devices without
pm_runtime_force_suspend/resume()"), PM core will not force
runtime suspend/resume anymore so this issue happens.
To solve this, make system suspend resume explicit by using
pm_runtime_force_{suspend,resume}() as the system sleep callbacks.
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() is used to make sure USB-DMAC
suspended after and initialized before renesas_usbhs."
Signed-off-by: Phuong Nguyen <phuong.nguyen.xw@renesas.com>
Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: <stable@vger.kernel.org> # v4.16+
[shimoda: revise the commit log and add Cc tag]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikolaus Voss [Wed, 20 Feb 2019 15:11:38 +0000 (16:11 +0100)]
usb: typec: tps6598x: handle block writes separately with plain-I2C adapters
commit
8a863a608d47fa5d9dd15cf841817f73f804cf91 upstream.
Commit
1a2f474d328f handles block _reads_ separately with plain-I2C
adapters, but the problem described with regmap-i2c not handling
SMBus block transfers (i.e. read and writes) correctly also exists
with writes.
As workaround, this patch adds a block write function the same way
1a2f474d328f adds a block read function.
Fixes:
1a2f474d328f ("usb: typec: tps6598x: handle block reads separately with plain-I2C adapters")
Fixes:
0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers")
Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Osipenko [Sun, 24 Feb 2019 15:36:22 +0000 (18:36 +0300)]
usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
commit
563b9372f7ec57e44e8f9a8600c5107d7ffdd166 upstream.
The ChipIdea's platform device need to be unregistered on Tegra's driver
module removal.
Fixes:
dfebb5f43a78827a ("usb: chipidea: Add support for Tegra20/30/114/124")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Cercueil [Mon, 28 Jan 2019 02:09:21 +0000 (23:09 -0300)]
clk: ingenic: Fix doc of ingenic_cgu_div_info
commit
7ca4c922aad2e3c46767a12f80d01c6b25337b59 upstream.
The 'div' field does not represent a number of bits used to divide
(understand: right-shift) the divider, but a number itself used to
divide the divider.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Cercueil [Mon, 28 Jan 2019 02:09:20 +0000 (23:09 -0300)]
clk: ingenic: Fix round_rate misbehaving with non-integer dividers
commit
bc5d922c93491878c44c9216e9d227c7eeb81d7f upstream.
Take a parent rate of 180 MHz, and a requested rate of 4.285715 MHz.
This results in a theorical divider of 41.999993 which is then rounded
up to 42. The .round_rate function would then return (180 MHz / 42) as
the clock, rounded down, so 4.285714 MHz.
Calling clk_set_rate on 4.285714 MHz would round the rate again, and
give a theorical divider of 42,0000028, now rounded up to 43, and the
rate returned would be (180 MHz / 43) which is 4.186046 MHz, aka. not
what we requested.
Fix this by rounding up the divisions.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Maarten ter Huurne <maarten@treewalker.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Thu, 21 Feb 2019 11:45:52 +0000 (12:45 +0100)]
clk: samsung: exynos5: Fix kfree() of const memory on setting driver_override
commit
785c9f411eb2d9a6076d3511c631587d5e676bf3 upstream.
Platform driver driver_override field should not be initialized from
const memory because the core later kfree() it. If driver_override is
manually set later through sysfs, kfree() of old value leads to:
$ echo "new_value" > /sys/bus/platform/drivers/.../driver_override
kernel BUG at ../mm/slub.c:3960!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
...
(kfree) from [<
c058e8c0>] (platform_set_driver_override+0x84/0xac)
(platform_set_driver_override) from [<
c058e908>] (driver_override_store+0x20/0x34)
(driver_override_store) from [<
c031f778>] (kernfs_fop_write+0x100/0x1dc)
(kernfs_fop_write) from [<
c0296de8>] (__vfs_write+0x2c/0x17c)
(__vfs_write) from [<
c02970c4>] (vfs_write+0xa4/0x188)
(vfs_write) from [<
c02972e8>] (ksys_write+0x4c/0xac)
(ksys_write) from [<
c0101000>] (ret_fast_syscall+0x0/0x28)
The clk-exynos5-subcmu driver uses override only for the purpose of
creating meaningful names for children devices (matching names of power
domains, e.g. DISP, MFC). The driver_override was not developed for
this purpose so just switch to default names of devices to fix the
issue.
Fixes:
b06a532bf1fa ("clk: samsung: Add Exynos5 sub-CMU clock driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Thu, 21 Feb 2019 11:45:51 +0000 (12:45 +0100)]
clk: samsung: exynos5: Fix possible NULL pointer exception on platform_device_alloc() failure
commit
5f0b6216ea381b43c0dff88702d6cc5673d63922 upstream.
During initialization of subdevices if platform_device_alloc() failed,
returned NULL pointer will be later dereferenced. Add proper error
paths to exynos5_clk_register_subcmu(). The return value of this
function is still ignored because at this stage of init there is nothing
we can do.
Fixes:
b06a532bf1fa ("clk: samsung: Add Exynos5 sub-CMU clock driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Lindgren [Mon, 11 Feb 2019 22:59:07 +0000 (14:59 -0800)]
clk: clk-twl6040: Fix imprecise external abort for pdmclk
commit
5ae51d67aec95f6f9386aa8dd5db424964895575 upstream.
I noticed that modprobe clk-twl6040 can fail after a cold boot with:
abe_cm:clk:0010:0: failed to enable
...
Unhandled fault: imprecise external abort (0x1406) at 0xbe896b20
WARNING: CPU: 1 PID: 29 at drivers/clk/clk.c:828 clk_core_disable_lock+0x18/0x24
...
(clk_core_disable_lock) from [<
c0123534>] (_disable_clocks+0x18/0x90)
(_disable_clocks) from [<
c0124040>] (_idle+0x17c/0x244)
(_idle) from [<
c0125ad4>] (omap_hwmod_idle+0x24/0x44)
(omap_hwmod_idle) from [<
c053a038>] (sysc_runtime_suspend+0x48/0x108)
(sysc_runtime_suspend) from [<
c06084c4>] (__rpm_callback+0x144/0x1d8)
(__rpm_callback) from [<
c0608578>] (rpm_callback+0x20/0x80)
(rpm_callback) from [<
c0607034>] (rpm_suspend+0x120/0x694)
(rpm_suspend) from [<
c0607a78>] (__pm_runtime_idle+0x60/0x84)
(__pm_runtime_idle) from [<
c053aaf0>] (sysc_probe+0x874/0xf2c)
(sysc_probe) from [<
c05fecd4>] (platform_drv_probe+0x48/0x98)
After searching around for a similar issue, I came across an earlier fix
that never got merged upstream in the Android tree for glass-omap-xrr02.
There is patch "MFD: twl6040-codec: Implement PDMCLK cold temp errata"
by Misael Lopez Cruz <misael.lopez@ti.com>.
Based on my observations, this fix is also needed when cold booting
devices, and not just for deeper idle modes. Since we now have a clock
driver for pdmclk, let's fix the issue in twl6040_pdmclk_prepare().
Cc: Misael Lopez Cruz <misael.lopez@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kunihiko Hayashi [Fri, 8 Feb 2019 02:25:23 +0000 (11:25 +0900)]
clk: uniphier: Fix update register for CPU-gear
commit
521282237b9d78b9bff423ec818becd4c95841c2 upstream.
Need to set the update bit in UNIPHIER_CLK_CPUGEAR_UPD to update
the CPU-gear value.
Fixes:
d08f1f0d596c ("clk: uniphier: add CPU-gear change (cpufreq) support")
Cc: linux-stable@vger.kernel.org
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Tue, 29 Jan 2019 16:17:24 +0000 (17:17 +0100)]
ext2: Fix underflow in ext2_max_size()
commit
1c2d14212b15a60300a2d4f6364753e87394c521 upstream.
When ext2 filesystem is created with 64k block size, ext2_max_size()
will return value less than 0. Also, we cannot write any file in this fs
since the sb->maxbytes is less than 0. The core of the problem is that
the size of block index tree for such large block size is more than
i_blocks can carry. So fix the computation to count with this
possibility.
File size limits computed with the new function for the full range of
possible block sizes look like:
bits file_size
10
17247252480
11
275415851008
12
2196873666560
13
2197948973056
14
2198486220800
15
2198754754560
16
2198888906752
CC: stable@vger.kernel.org
Reported-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vaibhav Jain [Tue, 29 Jan 2019 11:06:18 +0000 (16:36 +0530)]
cxl: Wrap iterations over afu slices inside 'afu_list_lock'
commit
edeb304f659792fb5bab90d7d6f3408b4c7301fb upstream.
Within cxl module, iteration over array 'adapter->afu' may be racy
at few points as it might be simultaneously read during an EEH and its
contents being set to NULL while driver is being unloaded or unbound
from the adapter. This might result in a NULL pointer to 'struct afu'
being de-referenced during an EEH thereby causing a kernel oops.
This patch fixes this by making sure that all access to the array
'adapter->afu' is wrapped within the context of spin-lock
'adapter->afu_list_lock'.
Fixes:
9e8df8a21963 ("cxl: EEH support")
Cc: stable@vger.kernel.org # v4.3+
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael J. Ruhl [Tue, 26 Feb 2019 16:45:35 +0000 (08:45 -0800)]
IB/hfi1: Close race condition on user context disable and close
commit
bc5add09764c123f58942a37c8335247e683d234 upstream.
When disabling and removing a receive context, it is possible for an
asynchronous event (i.e IRQ) to occur. Because of this, there is a race
between cleaning up the context, and the context being used by the
asynchronous event.
cpu 0 (context cleanup)
rc->ref_count-- (ref_count == 0)
hfi1_rcd_free()
cpu 1 (IRQ (with rcd index))
rcd_get_by_index()
lock
ref_count+++ <-- reference count race (WARNING)
return rcd
unlock
cpu 0
hfi1_free_ctxtdata() <-- incorrect free location
lock
remove rcd from array
unlock
free rcd
This race will cause the following WARNING trace:
WARNING: CPU: 0 PID: 175027 at include/linux/kref.h:52 hfi1_rcd_get_by_index+0x84/0xa0 [hfi1]
CPU: 0 PID: 175027 Comm: IMB-MPI1 Kdump: loaded Tainted: G OE ------------ 3.10.0-957.el7.x86_64 #1
Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.11.01.0076.C4.
111920150602 11/19/2015
Call Trace:
dump_stack+0x19/0x1b
__warn+0xd8/0x100
warn_slowpath_null+0x1d/0x20
hfi1_rcd_get_by_index+0x84/0xa0 [hfi1]
is_rcv_urgent_int+0x24/0x90 [hfi1]
general_interrupt+0x1b6/0x210 [hfi1]
__handle_irq_event_percpu+0x44/0x1c0
handle_irq_event_percpu+0x32/0x80
handle_irq_event+0x3c/0x60
handle_edge_irq+0x7f/0x150
handle_irq+0xe4/0x1a0
do_IRQ+0x4d/0xf0
common_interrupt+0x162/0x162
The race can also lead to a use after free which could be similar to:
general protection fault: 0000 1 SMP
CPU: 71 PID: 177147 Comm: IMB-MPI1 Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.el7.x86_64 #1
Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.11.01.0076.C4.
111920150602 11/19/2015
task:
ffff9962a8098000 ti:
ffff99717a508000 task.ti:
ffff99717a508000 __kmalloc+0x94/0x230
Call Trace:
? hfi1_user_sdma_process_request+0x9c8/0x1250 [hfi1]
hfi1_user_sdma_process_request+0x9c8/0x1250 [hfi1]
hfi1_aio_write+0xba/0x110 [hfi1]
do_sync_readv_writev+0x7b/0xd0
do_readv_writev+0xce/0x260
? handle_mm_fault+0x39d/0x9b0
? pick_next_task_fair+0x5f/0x1b0
? sched_clock_cpu+0x85/0xc0
? __schedule+0x13a/0x890
vfs_writev+0x35/0x60
SyS_writev+0x7f/0x110
system_call_fastpath+0x22/0x27
Use the appropriate kref API to verify access.
Reorder context cleanup to ensure context removal before cleanup occurs
correctly.
Cc: stable@vger.kernel.org # v4.14.0+
Fixes:
f683c80ca68e ("IB/hfi1: Resolve kernel panics by reference counting receive contexts")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lucas Stach [Wed, 27 Feb 2019 16:52:19 +0000 (17:52 +0100)]
PCI: dwc: skip MSI init if MSIs have been explicitly disabled
commit
3afc8299f39a27b60e1519a28e18878ce878e7dd upstream.
Since
7c5925afbc58 (PCI: dwc: Move MSI IRQs allocation to IRQ domains
hierarchical API) the MSI init claims one of the controller IRQs as a
chained IRQ line for the MSI controller. On some designs, like the i.MX6,
this line is shared with a PCIe legacy IRQ. When the line is claimed for
the MSI domain, any device trying to use this legacy IRQs will fail to
request this IRQ line.
As MSI and legacy IRQs are already mutually exclusive on the DWC core,
as the core won't forward any legacy IRQs once any MSI has been enabled,
users wishing to use legacy IRQs already need to explictly disable MSI
support (usually via the pci=nomsi kernel commandline option). To avoid
any issues with MSI conflicting with legacy IRQs, just skip all of the
DWC MSI initalization, including the IRQ line claim, when MSI is disabled.
Fixes:
7c5925afbc58 ("PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API")
Tested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dongdong Liu [Mon, 11 Feb 2019 07:02:59 +0000 (15:02 +0800)]
PCI/DPC: Fix print AER status in DPC event handling
commit
9f08a5d896ce43380314c34ed3f264c8e6075b80 upstream.
Previously dpc_handler() called aer_get_device_error_info() without
initializing info->severity, so aer_get_device_error_info() relied on
uninitialized data.
Add dpc_get_aer_uncorrect_severity() to read the port's AER status, mask,
and severity registers and set info->severity.
Also, clear the port's AER fatal error status bits.
Fixes:
8aefa9b0d910 ("PCI/DPC: Print AER status in DPC event handling")
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bjorn Helgaas [Fri, 4 Jan 2019 23:59:07 +0000 (17:59 -0600)]
PCI/ASPM: Use LTR if already enabled by platform
commit
10ecc818ea7319b5d0d2b4e1aa6a77323e776f76 upstream.
RussianNeuroMancer reported that the Intel 7265 wifi on a Dell Venue 11 Pro
7140 table stopped working after wakeup from suspend and bisected the
problem to
9ab105deb60f ("PCI/ASPM: Disable ASPM L1.2 Substate if we don't
have LTR"). David Ward reported the same problem on a Dell Latitude 7350.
After
af8bb9f89838 ("PCI/ACPI: Request LTR control from platform before
using it"), we don't enable LTR unless the platform has granted LTR control
to us. In addition, we don't notice if the platform had already enabled
LTR itself.
After
9ab105deb60f ("PCI/ASPM: Disable ASPM L1.2 Substate if we don't have
LTR"), we avoid using LTR if we don't think the path to the device has LTR
enabled.
The combination means that if the platform itself enables LTR but declines
to give the OS control over LTR, we unnecessarily avoided using ASPM L1.2.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201469
Fixes:
9ab105deb60f ("PCI/ASPM: Disable ASPM L1.2 Substate if we don't have LTR")
Fixes:
af8bb9f89838 ("PCI/ACPI: Request LTR control from platform before using it")
Reported-by: RussianNeuroMancer <russianneuromancer@ya.ru>
Reported-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v4.18+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Mon, 11 Feb 2019 18:30:32 +0000 (13:30 -0500)]
ext4: fix crash during online resizing
commit
f96c3ac8dfc24b4e38fc4c2eba5fea2107b929d1 upstream.
When computing maximum size of filesystem possible with given number of
group descriptor blocks, we forget to include s_first_data_block into
the number of blocks. Thus for filesystems with non-zero
s_first_data_block it can happen that computed maximum filesystem size
is actually lower than current filesystem size which confuses the code
and eventually leads to a BUG_ON in ext4_alloc_group_tables() hitting on
flex_gd->count == 0. The problem can be reproduced like:
truncate -s 100g /tmp/image
mkfs.ext4 -b 1024 -E resize=262144 /tmp/image 32768
mount -t ext4 -o loop /tmp/image /mnt
resize2fs /dev/loop0 262145
resize2fs /dev/loop0 300000
Fix the problem by properly including s_first_data_block into the
computed number of filesystem blocks.
Fixes:
1c6bd7173d66 "ext4: convert file system to meta_bg if needed..."
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
yangerkun [Mon, 11 Feb 2019 05:35:06 +0000 (00:35 -0500)]
ext4: add mask of ext4 flags to swap
commit
abdc644e8cbac2e9b19763680e5a7cf9bab2bee7 upstream.
The reason is that while swapping two inode, we swap the flags too.
Some flags such as EXT4_JOURNAL_DATA_FL can really confuse the things
since we're not resetting the address operations structure. The
simplest way to keep things sane is to restrict the flags that can be
swapped.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
yangerkun [Mon, 11 Feb 2019 05:14:02 +0000 (00:14 -0500)]
ext4: update quota information while swapping boot loader inode
commit
aa507b5faf38784defe49f5e64605ac3c4425e26 upstream.
While do swap between two inode, they swap i_data without update
quota information. Also, swap_inode_boot_loader can do "revert"
somtimes, so update the quota while all operations has been finished.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
yangerkun [Mon, 11 Feb 2019 05:05:24 +0000 (00:05 -0500)]
ext4: cleanup pagecache before swap i_data
commit
a46c68a318b08f819047843abf349aeee5d10ac2 upstream.
While do swap, we should make sure there has no new dirty page since we
should swap i_data between two inode:
1.We should lock i_mmap_sem with write to avoid new pagecache from mmap
read/write;
2.Change filemap_flush to filemap_write_and_wait and move them to the
space protected by inode lock to avoid new pagecache from buffer read/write.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
yangerkun [Mon, 11 Feb 2019 05:02:05 +0000 (00:02 -0500)]
ext4: fix check of inode in swap_inode_boot_loader
commit
67a11611e1a5211f6569044fbf8150875764d1d0 upstream.
Before really do swap between inode and boot inode, something need to
check to avoid invalid or not permitted operation, like does this inode
has inline data. But the condition check should be protected by inode
lock to avoid change while swapping. Also some other condition will not
change between swapping, but there has no problem to do this under inode
lock.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 7 Mar 2019 10:22:41 +0000 (11:22 +0100)]
cpufreq: pxa2xx: remove incorrect __init annotation
commit
9505b98ccddc454008ca7efff90044e3e857c827 upstream.
pxa_cpufreq_init_voltages() is marked __init but usually inlined into
the non-__init pxa_cpufreq_init() function. When building with clang,
it can stay as a standalone function in a discarded section, and produce
this warning:
WARNING: vmlinux.o(.text+0x616a00): Section mismatch in reference from the function pxa_cpufreq_init() to the function .init.text:pxa_cpufreq_init_voltages()
The function pxa_cpufreq_init() references
the function __init pxa_cpufreq_init_voltages().
This is often because pxa_cpufreq_init lacks a __init
annotation or the annotation of pxa_cpufreq_init_voltages is wrong.
Fixes:
50e77fcd790e ("ARM: pxa: remove __init from cpufreq_driver->init()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yangtao Li [Mon, 4 Feb 2019 07:48:54 +0000 (02:48 -0500)]
cpufreq: tegra124: add missing of_node_put()
commit
446fae2bb5395f3028d8e3aae1508737e5a72ea1 upstream.
of_cpu_device_node_get() will increase the refcount of device_node,
it is necessary to call of_node_put() at the end to release the
refcount.
Fixes:
9eb15dbbfa1a2 ("cpufreq: Add cpufreq driver for Tegra124")
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Viresh Kumar [Wed, 20 Feb 2019 11:11:18 +0000 (16:41 +0530)]
cpufreq: kryo: Release OPP tables on module removal
commit
0334906c06967142c8805fbe88acf787f65d3d26 upstream.
Commit
5ad7346b4ae2 ("cpufreq: kryo: Add module remove and exit") made
it possible to build the kryo cpufreq driver as a module, but it failed
to release all the resources, i.e. OPP tables, when the module is
unloaded.
This patch fixes it by releasing the OPP tables, by calling
dev_pm_opp_put_supported_hw() for them, from the
qcom_cpufreq_kryo_remove() routine. The array of pointers to the OPP
tables is also allocated dynamically now in qcom_cpufreq_kryo_probe(),
as the pointers will be required while releasing the resources.
Compile tested only.
Cc: 4.18+ <stable@vger.kernel.org> # v4.18+
Fixes:
5ad7346b4ae2 ("cpufreq: kryo: Add module remove and exit")
Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masami Hiramatsu [Tue, 12 Feb 2019 16:11:19 +0000 (01:11 +0900)]
x86/kprobes: Prohibit probing on optprobe template code
commit
0192e6535ebe9af68614198ced4fd6d37b778ebf upstream.
Prohibit probing on optprobe template code, since it is not
a code but a template instruction sequence. If we modify
this template, copied template must be broken.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes:
9326638cbee2 ("kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation")
Link: http://lkml.kernel.org/r/154998787911.31052.15274376330136234452.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doug Berger [Wed, 20 Feb 2019 22:15:28 +0000 (14:15 -0800)]
irqchip/brcmstb-l2: Use _irqsave locking variants in non-interrupt code
commit
33517881ede742107f416533b8c3e4abc56763da upstream.
Using the irq_gc_lock/irq_gc_unlock functions in the suspend and
resume functions creates the opportunity for a deadlock during
suspend, resume, and shutdown. Using the irq_gc_lock_irqsave/
irq_gc_unlock_irqrestore variants prevents this possible deadlock.
Cc: stable@vger.kernel.org
Fixes:
7f646e92766e2 ("irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
[maz: tidied up $SUBJECT]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zenghui Yu [Sun, 10 Feb 2019 05:24:10 +0000 (05:24 +0000)]
irqchip/gic-v3-its: Avoid parsing _indirect_ twice for Device table
commit
8d565748b6035eeda18895c213396a4c9fac6a4c upstream.
In current logic, its_parse_indirect_baser() will be invoked twice
when allocating Device tables. Add a *break* to omit the unnecessary
and annoying (might be ...) invoking.
Fixes:
32bd44dc19de ("irqchip/gic-v3-its: Fix the incorrect parsing of VCPU table size")
Cc: stable@vger.kernel.org
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lubomir Rintel [Sun, 10 Feb 2019 19:47:49 +0000 (20:47 +0100)]
libertas_tf: don't set URB_ZERO_PACKET on IN USB transfer
commit
607076a904c435f2677fadaadd4af546279db68b upstream.
It doesn't make sense and the USB core warns on each submit of such
URB, easily flooding the message buffer with tracebacks.
Analogous issue was fixed in regular libertas driver in commit
6528d8804780
("libertas: don't set URB_ZERO_PACKET on IN USB transfer").
Cc: stable@vger.kernel.org
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Boyd [Tue, 15 Jan 2019 22:54:47 +0000 (14:54 -0800)]
soc: qcom: rpmh: Avoid accessing freed memory from batch API
commit
baef1c90aac7e5bf13f0360a3b334825a23d31a1 upstream.
Using the batch API from the interconnect driver sometimes leads to a
KASAN error due to an access to freed memory. This is easier to trigger
with threadirqs on the kernel commandline.
BUG: KASAN: use-after-free in rpmh_tx_done+0x114/0x12c
Read of size 1 at addr
fffffff51414ad84 by task irq/110-apps_rs/57
CPU: 0 PID: 57 Comm: irq/110-apps_rs Tainted: G W 4.19.10 #72
Call trace:
dump_backtrace+0x0/0x2f8
show_stack+0x20/0x2c
__dump_stack+0x20/0x28
dump_stack+0xcc/0x10c
print_address_description+0x74/0x240
kasan_report+0x250/0x26c
__asan_report_load1_noabort+0x20/0x2c
rpmh_tx_done+0x114/0x12c
tcs_tx_done+0x450/0x768
irq_forced_thread_fn+0x58/0x9c
irq_thread+0x120/0x1dc
kthread+0x248/0x260
ret_from_fork+0x10/0x18
Allocated by task 385:
kasan_kmalloc+0xac/0x148
__kmalloc+0x170/0x1e4
rpmh_write_batch+0x174/0x540
qcom_icc_set+0x8dc/0x9ac
icc_set+0x288/0x2e8
a6xx_gmu_stop+0x320/0x3c0
a6xx_pm_suspend+0x108/0x124
adreno_suspend+0x50/0x60
pm_generic_runtime_suspend+0x60/0x78
__rpm_callback+0x214/0x32c
rpm_callback+0x54/0x184
rpm_suspend+0x3f8/0xa90
pm_runtime_work+0xb4/0x178
process_one_work+0x544/0xbc0
worker_thread+0x514/0x7d0
kthread+0x248/0x260
ret_from_fork+0x10/0x18
Freed by task 385:
__kasan_slab_free+0x12c/0x1e0
kasan_slab_free+0x10/0x1c
kfree+0x134/0x588
rpmh_write_batch+0x49c/0x540
qcom_icc_set+0x8dc/0x9ac
icc_set+0x288/0x2e8
a6xx_gmu_stop+0x320/0x3c0
a6xx_pm_suspend+0x108/0x124
adreno_suspend+0x50/0x60
cr50_spi spi5.0: SPI transfer timed out
pm_generic_runtime_suspend+0x60/0x78
__rpm_callback+0x214/0x32c
rpm_callback+0x54/0x184
rpm_suspend+0x3f8/0xa90
pm_runtime_work+0xb4/0x178
process_one_work+0x544/0xbc0
worker_thread+0x514/0x7d0
kthread+0x248/0x260
ret_from_fork+0x10/0x18
The buggy address belongs to the object at
fffffff51414ac80
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 260 bytes inside of
512-byte region [
fffffff51414ac80,
fffffff51414ae80)
The buggy address belongs to the page:
page:
ffffffbfd4505200 count:1 mapcount:0 mapping:
fffffff51e00c680 index:0x0 compound_mapcount: 0
flags: 0x4000000000008100(slab|head)
raw:
4000000000008100 ffffffbfd4529008 ffffffbfd44f9208 fffffff51e00c680
raw:
0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
fffffff51414ac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
fffffff51414ad00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>
fffffff51414ad80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
fffffff51414ae00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
fffffff51414ae80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
The batch API sets the same completion for each rpmh message that's sent
and then loops through all the messages and waits for that single
completion declared on the stack to be completed before returning from
the function and freeing the message structures. Unfortunately, some
messages may still be in process and 'stuck' in the TCS. At some later
point, the tcs_tx_done() interrupt will run and try to process messages
that have already been freed at the end of rpmh_write_batch(). This will
in turn access the 'needs_free' member of the rpmh_request structure and
cause KASAN to complain. Furthermore, if there's a message that's
completed in rpmh_tx_done() and freed immediately after the complete()
call is made we'll be racing with potentially freed memory when
accessing the 'needs_free' member:
CPU0 CPU1
---- ----
rpmh_tx_done()
complete(&compl)
wait_for_completion(&compl)
kfree(rpm_msg)
if (rpm_msg->needs_free)
<KASAN warning splat>
Let's fix this by allocating a chunk of completions for each message and
waiting for all of them to be completed before returning from the batch
API. Alternatively, we could wait for the last message in the batch, but
that may be a more complicated change because it looks like
tcs_tx_done() just iterates through the indices of the queue and
completes each message instead of tracking the last inserted message and
completing that first.
Fixes:
c8790cb6da58 ("drivers: qcom: rpmh: add support for batch RPMH request")
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: "Raju P.L.S.S.S.N" <rplsssn@codeaurora.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: stable@vger.kernel.org
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Thu, 14 Feb 2019 15:17:20 +0000 (15:17 +0000)]
Btrfs: fix corruption reading shared and compressed extents after hole punching
commit
8e928218780e2f1cf2f5891c7575e8f0b284fcce upstream.
In the past we had data corruption when reading compressed extents that
are shared within the same file and they are consecutive, this got fixed
by commit
005efedf2c7d0 ("Btrfs: fix read corruption of compressed and
shared extents") and by commit
808f80b46790f ("Btrfs: update fix for read
corruption of compressed and shared extents"). However there was a case
that was missing in those fixes, which is when the shared and compressed
extents are referenced with a non-zero offset. The following shell script
creates a reproducer for this issue:
#!/bin/bash
mkfs.btrfs -f /dev/sdc &> /dev/null
mount -o compress /dev/sdc /mnt/sdc
# Create a file with 3 consecutive compressed extents, each has an
# uncompressed size of 128Kb and a compressed size of 4Kb.
for ((i = 1; i <= 3; i++)); do
head -c 4096 /dev/zero
for ((j = 1; j <= 31; j++)); do
head -c 4096 /dev/zero | tr '\0' "\377"
done
done > /mnt/sdc/foobar
sync
echo "Digest after file creation: $(md5sum /mnt/sdc/foobar)"
# Clone the first extent into offsets 128K and 256K.
xfs_io -c "reflink /mnt/sdc/foobar 0 128K 128K" /mnt/sdc/foobar
xfs_io -c "reflink /mnt/sdc/foobar 0 256K 128K" /mnt/sdc/foobar
sync
echo "Digest after cloning: $(md5sum /mnt/sdc/foobar)"
# Punch holes into the regions that are already full of zeroes.
xfs_io -c "fpunch 0 4K" /mnt/sdc/foobar
xfs_io -c "fpunch 128K 4K" /mnt/sdc/foobar
xfs_io -c "fpunch 256K 4K" /mnt/sdc/foobar
sync
echo "Digest after hole punching: $(md5sum /mnt/sdc/foobar)"
echo "Dropping page cache..."
sysctl -q vm.drop_caches=1
echo "Digest after hole punching: $(md5sum /mnt/sdc/foobar)"
umount /dev/sdc
When running the script we get the following output:
Digest after file creation:
5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
linked 131072/131072 bytes at offset 131072
128 KiB, 1 ops; 0.0033 sec (36.960 MiB/sec and 295.6830 ops/sec)
linked 131072/131072 bytes at offset 262144
128 KiB, 1 ops; 0.0015 sec (78.567 MiB/sec and 628.5355 ops/sec)
Digest after cloning:
5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
Digest after hole punching:
5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
Dropping page cache...
Digest after hole punching:
fba694ae8664ed0c2e9ff8937e7f1484 /mnt/sdc/foobar
This happens because after reading all the pages of the extent in the
range from 128K to 256K for example, we read the hole at offset 256K
and then when reading the page at offset 260K we don't submit the
existing bio, which is responsible for filling all the page in the
range 128K to 256K only, therefore adding the pages from range 260K
to 384K to the existing bio and submitting it after iterating over the
entire range. Once the bio completes, the uncompressed data fills only
the pages in the range 128K to 256K because there's no more data read
from disk, leaving the pages in the range 260K to 384K unfilled. It is
just a slightly different variant of what was solved by commit
005efedf2c7d0 ("Btrfs: fix read corruption of compressed and shared
extents").
Fix this by forcing a bio submit, during readpages(), whenever we find a
compressed extent map for a page that is different from the extent map
for the previous page or has a different starting offset (in case it's
the same compressed extent), instead of the extent map's original start
offset.
A test case for fstests follows soon.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Fixes:
808f80b46790f ("Btrfs: update fix for read corruption of compressed and shared extents")
Fixes:
005efedf2c7d0 ("Btrfs: fix read corruption of compressed and shared extents")
Cc: stable@vger.kernel.org # 4.3+
Tested-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Thumshirn [Mon, 18 Feb 2019 10:28:37 +0000 (11:28 +0100)]
btrfs: ensure that a DUP or RAID1 block group has exactly two stripes
commit
349ae63f40638a28c6fce52e8447c2d14b84cc0c upstream.
We recently had a customer issue with a corrupted filesystem. When
trying to mount this image btrfs panicked with a division by zero in
calc_stripe_length().
The corrupt chunk had a 'num_stripes' value of 1. calc_stripe_length()
takes this value and divides it by the number of copies the RAID profile
is expected to have to calculate the amount of data stripes. As a DUP
profile is expected to have 2 copies this division resulted in 1/2 = 0.
Later then the 'data_stripes' variable is used as a divisor in the
stripe length calculation which results in a division by 0 and thus a
kernel panic.
When encountering a filesystem with a DUP block group and a
'num_stripes' value unequal to 2, refuse mounting as the image is
corrupted and will lead to unexpected behaviour.
Code inspection showed a RAID1 block group has the same issues.
Fixes:
e06cd3dd7cea ("Btrfs: add validadtion checks for chunk loading")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Thu, 13 Dec 2018 21:16:56 +0000 (21:16 +0000)]
Btrfs: setup a nofs context for memory allocation at __btrfs_set_acl
commit
a0873490660246db587849a9e172f2b7b21fa88a upstream.
We are holding a transaction handle when setting an acl, therefore we can
not allocate the xattr value buffer using GFP_KERNEL, as we could deadlock
if reclaim is triggered by the allocation, therefore setup a nofs context.
Fixes:
39a27ec1004e8 ("btrfs: use GFP_KERNEL for xattr and acl allocations")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Thu, 13 Dec 2018 21:16:45 +0000 (21:16 +0000)]
Btrfs: setup a nofs context for memory allocation at btrfs_create_tree()
commit
b89f6d1fcb30a8cbdc18ce00c7d93792076af453 upstream.
We are holding a transaction handle when creating a tree, therefore we can
not allocate the root using GFP_KERNEL, as we could deadlock if reclaim is
triggered by the allocation, therefore setup a nofs context.
Fixes:
74e4d82757f74 ("btrfs: let callers of btrfs_alloc_root pass gfp flags")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Finn Thain [Wed, 16 Jan 2019 05:23:24 +0000 (16:23 +1100)]
m68k: Add -ffreestanding to CFLAGS
commit
28713169d879b67be2ef2f84dcf54905de238294 upstream.
This patch fixes a build failure when using GCC 8.1:
/usr/bin/ld: block/partitions/ldm.o: in function `ldm_parse_tocblock':
block/partitions/ldm.c:153: undefined reference to `strcmp'
This is caused by a new optimization which effectively replaces a
strncmp() call with a strcmp() call. This affects a number of strncmp()
call sites in the kernel.
The entire class of optimizations is avoided with -fno-builtin, which
gets enabled by -ffreestanding. This may avoid possible future build
failures in case new optimizations appear in future compilers.
I haven't done any performance measurements with this patch but I did
count the function calls in a defconfig build. For example, there are now
23 more sprintf() calls and 39 fewer strcpy() calls. The effect on the
other libc functions is smaller.
If this harms performance we can tackle that regression by optimizing
the call sites, ideally using semantic patches. That way, clang and ICC
builds might benfit too.
Cc: stable@vger.kernel.org
Reference: https://marc.info/?l=linux-m68k&m=
154514816222244&w=2
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vivek Goyal [Wed, 30 Jan 2019 19:01:57 +0000 (14:01 -0500)]
ovl: Do not lose security.capability xattr over metadata file copy-up
commit
993a0b2aec52754f0897b1dab4c453be8217cae5 upstream.
If a file has been copied up metadata only, and later data is copied up,
upper loses any security.capability xattr it has (underlying filesystem
clears it as upon file write).
From a user's point of view, this is just a file copy-up and that should
not result in losing security.capability xattr. Hence, before data copy
up, save security.capability xattr (if any) and restore it on upper after
data copy up is complete.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Fixes:
0c2888749363 ("ovl: A new xattr OVL_XATTR_METACOPY for file on upper")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vivek Goyal [Fri, 11 Jan 2019 18:37:00 +0000 (19:37 +0100)]
ovl: During copy up, first copy up data and then xattrs
commit
5f32879ea35523b9842bdbdc0065e13635caada2 upstream.
If a file with capability set (and hence security.capability xattr) is
written kernel clears security.capability xattr. For overlay, during file
copy up if xattrs are copied up first and then data is, copied up. This
means data copy up will result in clearing of security.capability xattr
file on lower has. And this can result into surprises. If a lower file has
CAP_SETUID, then it should not be cleared over copy up (if nothing was
actually written to file).
This also creates problems with chown logic where it first copies up file
and then tries to clear setuid bit. But by that time security.capability
xattr is already gone (due to data copy up), and caller gets -ENODATA.
This has been reported by Giuseppe here.
https://github.com/containers/libpod/issues/2015#issuecomment-
447824842
Fix this by copying up data first and then metadta. This is a regression
which has been introduced by my commit as part of metadata only copy up
patches.
TODO: There will be some corner cases where a file is copied up metadata
only and later data copy up happens and that will clear security.capability
xattr. Something needs to be done about that too.
Fixes:
bd64e57586d3 ("ovl: During copy up, first copy up metadata and then data")
Cc: <stable@vger.kernel.org> # v4.19+
Reported-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jann Horn [Wed, 23 Jan 2019 14:19:17 +0000 (15:19 +0100)]
splice: don't merge into linked buffers
commit
a0ce2f0aa6ad97c3d4927bf2ca54bcebdf062d55 upstream.
Before this patch, it was possible for two pipes to affect each other after
data had been transferred between them with tee():
============
$ cat tee_test.c
int main(void) {
int pipe_a[2];
if (pipe(pipe_a)) err(1, "pipe");
int pipe_b[2];
if (pipe(pipe_b)) err(1, "pipe");
if (write(pipe_a[1], "abcd", 4) != 4) err(1, "write");
if (tee(pipe_a[0], pipe_b[1], 2, 0) != 2) err(1, "tee");
if (write(pipe_b[1], "xx", 2) != 2) err(1, "write");
char buf[5];
if (read(pipe_a[0], buf, 4) != 4) err(1, "read");
buf[4] = 0;
printf("got back: '%s'\n", buf);
}
$ gcc -o tee_test tee_test.c
$ ./tee_test
got back: 'abxx'
$
============
As suggested by Al Viro, fix it by creating a separate type for
non-mergeable pipe buffers, then changing the types of buffers in
splice_pipe_to_pipe() and link_pipe().
Cc: <stable@vger.kernel.org>
Fixes:
7c77f0b3f920 ("splice: implement pipe to pipe splicing")
Fixes:
70524490ee2e ("[PATCH] splice: add support for sys_tee()")
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Varad Gautam [Thu, 24 Jan 2019 13:03:06 +0000 (14:03 +0100)]
fs/devpts: always delete dcache dentry-s in dput()
commit
73052b0daee0b750b39af18460dfec683e4f5887 upstream.
d_delete only unhashes an entry if it is reached with
dentry->d_lockref.count != 1. Prior to commit
8ead9dd54716 ("devpts:
more pty driver interface cleanups"), d_delete was called on a dentry
from devpts_pty_kill with two references held, which would trigger the
unhashing, and the subsequent dputs would release it.
Commit
8ead9dd54716 reworked devpts_pty_kill to stop acquiring the second
reference from d_find_alias, and the d_delete call left the dentries
still on the hashed list without actually ever being dropped from dcache
before explicit cleanup. This causes the number of negative dentries for
devpts to pile up, and an `ls /dev/pts` invocation can take seconds to
return.
Provide always_delete_dentry() from simple_dentry_operations
as .d_delete for devpts, to make the dentry be dropped from dcache.
Without this cleanup, the number of dentries in /dev/pts/ can be grown
arbitrarily as:
`python -c 'import pty; pty.spawn(["ls", "/dev/pts"])'`
A systemtap probe on dcache_readdir to count d_subdirs shows this count
to increase with each pty spawn invocation above:
probe kernel.function("dcache_readdir") {
subdirs = &@cast($file->f_path->dentry, "dentry")->d_subdirs;
p = subdirs;
p = @cast(p, "list_head")->next;
i = 0
while (p != subdirs) {
p = @cast(p, "list_head")->next;
i = i+1;
}
printf("number of dentries: %d\n", i);
}
Fixes:
8ead9dd54716 ("devpts: more pty driver interface cleanups")
Signed-off-by: Varad Gautam <vrd@amazon.de>
Reported-by: Zheng Wang <wanz@amazon.de>
Reported-by: Brandon Schwartz <bsschwar@amazon.de>
Root-caused-by: Maximilian Heyne <mheyne@amazon.de>
Root-caused-by: Nicolas Pernas Maradei <npernas@amazon.de>
CC: David Woodhouse <dwmw@amazon.co.uk>
CC: Maximilian Heyne <mheyne@amazon.de>
CC: Stefan Nuernberger <snu@amazon.de>
CC: Amit Shah <aams@amazon.de>
CC: Linus Torvalds <torvalds@linux-foundation.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Al Viro <viro@ZenIV.linux.org.uk>
CC: Christian Brauner <christian.brauner@ubuntu.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: Matthew Wilcox <willy@infradead.org>
CC: Eric Biggers <ebiggers@google.com>
CC: <stable@vger.kernel.org> # 4.9+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Himanshu Madhani [Fri, 15 Feb 2019 22:37:12 +0000 (14:37 -0800)]
scsi: qla2xxx: Fix LUN discovery if loop id is not assigned yet by firmware
commit
ec322937a7f152d68755dc8316523bf6f831b48f upstream.
This patch fixes LUN discovery when loop ID is not yet assigned by the
firmware during driver load/sg_reset operations. Driver will now search for
new loop id before retrying login.
Fixes:
48acad099074 ("scsi: qla2xxx: Fix N2N link re-connect")
Cc: stable@vger.kernel.org #4.19
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Fri, 25 Jan 2019 18:34:56 +0000 (10:34 -0800)]
scsi: target/iscsi: Avoid iscsit_release_commands_from_conn() deadlock
commit
32e36bfbcf31452a854263e7c7f32fbefc4b44d8 upstream.
When using SCSI passthrough in combination with the iSCSI target driver
then cmd->t_state_lock may be obtained from interrupt context. Hence, all
code that obtains cmd->t_state_lock from thread context must disable
interrupts first. This patch avoids that lockdep reports the following:
WARNING: inconsistent lock state
4.18.0-dbg+ #1 Not tainted
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
iscsi_ttx/1800 [HC1[1]:SC0[2]:HE0:SE0] takes:
000000006e7b0ceb (&(&cmd->t_state_lock)->rlock){?...}, at: target_complete_cmd+0x47/0x2c0 [target_core_mod]
{HARDIRQ-ON-W} state was registered at:
lock_acquire+0xd2/0x260
_raw_spin_lock+0x32/0x50
iscsit_close_connection+0x97e/0x1020 [iscsi_target_mod]
iscsit_take_action_for_connection_exit+0x108/0x200 [iscsi_target_mod]
iscsi_target_rx_thread+0x180/0x190 [iscsi_target_mod]
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
irq event stamp: 1281
hardirqs last enabled at (1279): [<
ffffffff970ade79>] __local_bh_enable_ip+0xa9/0x160
hardirqs last disabled at (1281): [<
ffffffff97a008a5>] interrupt_entry+0xb5/0xd0
softirqs last enabled at (1278): [<
ffffffff977cd9a1>] lock_sock_nested+0x51/0xc0
softirqs last disabled at (1280): [<
ffffffffc07a6e04>] ip6_finish_output2+0x124/0xe40 [ipv6]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&cmd->t_state_lock)->rlock);
<Interrupt>
lock(&(&cmd->t_state_lock)->rlock);
Martin K. Petersen [Tue, 12 Feb 2019 21:21:05 +0000 (16:21 -0500)]
scsi: sd: Optimal I/O size should be a multiple of physical block size
commit
a83da8a4509d3ebfe03bb7fffce022e4d5d4764f upstream.
It was reported that some devices report an OPTIMAL TRANSFER LENGTH of
0xFFFF blocks. That looks bogus, especially for a device with a
4096-byte physical block size.
Ignore OPTIMAL TRANSFER LENGTH if it is not a multiple of the device's
reported physical block size.
To make the sanity checking conditionals more readable--and to
facilitate printing warnings--relocate the checking to a helper
function. No functional change aside from the printks.
Cc: <stable@vger.kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199759
Reported-by: Christoph Anton Mitterer <calestyo@scientia.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sagar Biradar [Fri, 8 Mar 2019 07:26:41 +0000 (23:26 -0800)]
scsi: aacraid: Fix performance issue on logical drives
commit
0015437cc046e5ec2b57b00ff8312b8d432eac7c upstream.
Fix performance issue where the queue depth for SmartIOC logical volumes is
set to 1, and allow the usual logical volume code to be executed
Fixes:
a052865fe287 (aacraid: Set correct Queue Depth for HBA1000 RAW disks)
Cc: stable@vger.kernel.org
Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe Franciosi [Wed, 27 Feb 2019 16:10:34 +0000 (16:10 +0000)]
scsi: virtio_scsi: don't send sc payload with tmfs
commit
3722e6a52174d7c3a00e6f5efd006ca093f346c1 upstream.
The virtio scsi spec defines struct virtio_scsi_ctrl_tmf as a set of
device-readable records and a single device-writable response entry:
struct virtio_scsi_ctrl_tmf
{
// Device-readable part
le32 type;
le32 subtype;
u8 lun[8];
le64 id;
// Device-writable part
u8 response;
}
The above should be organised as two descriptor entries (or potentially
more if using VIRTIO_F_ANY_LAYOUT), but without any extra data after "le64
id" or after "u8 response".
The Linux driver doesn't respect that, with virtscsi_abort() and
virtscsi_device_reset() setting cmd->sc before calling virtscsi_tmf(). It
results in the original scsi command payload (or writable buffers) added to
the tmf.
This fixes the problem by leaving cmd->sc zeroed out, which makes
virtscsi_kick_cmd() add the tmf to the control vq without any payload.
Cc: stable@vger.kernel.org
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Halil Pasic [Mon, 21 Jan 2019 12:19:43 +0000 (13:19 +0100)]
s390/virtio: handle find on invalid queue gracefully
commit
3438b2c039b4bf26881786a1f3450f016d66ad11 upstream.
A queue with a capacity of zero is clearly not a valid virtio queue.
Some emulators report zero queue size if queried with an invalid queue
index. Instead of crashing in this case let us just return -ENOENT. To
make that work properly, let us fix the notifier cleanup logic as well.
Cc: stable@vger.kernel.org
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Schwidefsky [Thu, 14 Feb 2019 14:40:56 +0000 (15:40 +0100)]
s390/setup: fix early warning messages
commit
8727638426b0aea59d7f904ad8ddf483f9234f88 upstream.
The setup_lowcore() function creates a new prefix page for the boot CPU.
The PSW mask for the system_call, external interrupt, i/o interrupt and
the program check handler have the DAT bit set in this new prefix page.
At the time setup_lowcore is called the system still runs without virtual
address translation, the paging_init() function creates the kernel page
table and loads the CR13 with the kernel ASCE.
Any code between setup_lowcore() and the end of paging_init() that has
a BUG or WARN statement will create a program check that can not be
handled correctly as there is no kernel page table yet.
To allow early WARN statements initially setup the lowcore with DAT off
and set the DAT bit only after paging_init() has completed.
Cc: stable@vger.kernel.org
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Samuel Holland [Sun, 13 Jan 2019 02:17:18 +0000 (20:17 -0600)]
clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer instability
commit
c950ca8c35eeb32224a63adc47e12f9e226da241 upstream.
The Allwinner A64 SoC is known[1] to have an unstable architectural
timer, which manifests itself most obviously in the time jumping forward
a multiple of 95 years[2][3]. This coincides with 2^56 cycles at a
timer frequency of 24 MHz, implying that the time went slightly backward
(and this was interpreted by the kernel as it jumping forward and
wrapping around past the epoch).
Investigation revealed instability in the low bits of CNTVCT at the
point a high bit rolls over. This leads to power-of-two cycle forward
and backward jumps. (Testing shows that forward jumps are about twice as
likely as backward jumps.) Since the counter value returns to normal
after an indeterminate read, each "jump" really consists of both a
forward and backward jump from the software perspective.
Unless the kernel is trapping CNTVCT reads, a userspace program is able
to read the register in a loop faster than it changes. A test program
running on all 4 CPU cores that reported jumps larger than 100 ms was
run for 13.6 hours and reported the following:
Count | Event
-------+---------------------------
9940 | jumped backward 699ms
268 | jumped backward 1398ms
1 | jumped backward 2097ms
16020 | jumped forward 175ms
6443 | jumped forward 699ms
2976 | jumped forward 1398ms
9 | jumped forward 356516ms
9 | jumped forward 357215ms
4 | jumped forward 714430ms
1 | jumped forward 3578440ms
This works out to a jump larger than 100 ms about every 5.5 seconds on
each CPU core.
The largest jump (almost an hour!) was the following sequence of reads:
0x0000007fffffffff → 0x00000093feffffff → 0x0000008000000000
Note that the middle bits don't necessarily all read as all zeroes or
all ones during the anomalous behavior; however the low 10 bits checked
by the function in this patch have never been observed with any other
value.
Also note that smaller jumps are much more common, with backward jumps
of 2048 (2^11) cycles observed over 400 times per second on each core.
(Of course, this is partially explained by lower bits rolling over more
frequently.) Any one of these could have caused the 95 year time skip.
Similar anomalies were observed while reading CNTPCT (after patching the
kernel to allow reads from userspace). However, the CNTPCT jumps are
much less frequent, and only small jumps were observed. The same program
as before (except now reading CNTPCT) observed after 72 hours:
Count | Event
-------+---------------------------
17 | jumped backward 699ms
52 | jumped forward 175ms
2831 | jumped forward 699ms
5 | jumped forward 1398ms
Further investigation showed that the instability in CNTPCT/CNTVCT also
affected the respective timer's TVAL register. The following values were
observed immediately after writing CNVT_TVAL to 0x10000000:
CNTVCT | CNTV_TVAL | CNTV_CVAL | CNTV_TVAL Error
--------------------+------------+--------------------+-----------------
0x000000d4a2d8bfff | 0x10003fff | 0x000000d4b2d8bfff | +0x00004000
0x000000d4a2d94000 | 0x0fffffff | 0x000000d4b2d97fff | -0x00004000
0x000000d4a2d97fff | 0x10003fff | 0x000000d4b2d97fff | +0x00004000
0x000000d4a2d9c000 | 0x0fffffff | 0x000000d4b2d9ffff | -0x00004000
The pattern of errors in CNTV_TVAL seemed to depend on exactly which
value was written to it. For example, after writing 0x10101010:
CNTVCT | CNTV_TVAL | CNTV_CVAL | CNTV_TVAL Error
--------------------+------------+--------------------+-----------------
0x000001ac3effffff | 0x1110100f | 0x000001ac4f10100f | +0x1000000
0x000001ac40000000 | 0x1010100f | 0x000001ac5110100f | -0x1000000
0x000001ac58ffffff | 0x1110100f | 0x000001ac6910100f | +0x1000000
0x000001ac66000000 | 0x1010100f | 0x000001ac7710100f | -0x1000000
0x000001ac6affffff | 0x1110100f | 0x000001ac7b10100f | +0x1000000
0x000001ac6e000000 | 0x1010100f | 0x000001ac7f10100f | -0x1000000
I was also twice able to reproduce the issue covered by Allwinner's
workaround[4], that writing to TVAL sometimes fails, and both CVAL and
TVAL are left with entirely bogus values. One was the following values:
CNTVCT | CNTV_TVAL | CNTV_CVAL
--------------------+------------+--------------------------------------
0x000000d4a2d6014c | 0x8fbd5721 | 0x000000d132935fff (615s in the past)
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
========================================================================
Because the CPU can read the CNTPCT/CNTVCT registers faster than they
change, performing two reads of the register and comparing the high bits
(like other workarounds) is not a workable solution. And because the
timer can jump both forward and backward, no pair of reads can
distinguish a good value from a bad one. The only way to guarantee a
good value from consecutive reads would be to read _three_ times, and
take the middle value only if the three values are 1) each unique and
2) increasing. This takes at minimum 3 counter cycles (125 ns), or more
if an anomaly is detected.
However, since there is a distinct pattern to the bad values, we can
optimize the common case (1022/1024 of the time) to a single read by
simply ignoring values that match the error pattern. This still takes no
more than 3 cycles in the worst case, and requires much less code. As an
additional safety check, we still limit the loop iteration to the number
of max-frequency (1.2 GHz) CPU cycles in three 24 MHz counter periods.
For the TVAL registers, the simple solution is to not use them. Instead,
read or write the CVAL and calculate the TVAL value in software.
Although the manufacturer is aware of at least part of the erratum[4],
there is no official name for it. For now, use the kernel-internal name
"UNKNOWN1".
[1]: https://github.com/armbian/build/commit/
a08cd6fe7ae9
[2]: https://forum.armbian.com/topic/3458-a64-datetime-clock-issue/
[3]: https://irclog.whitequark.org/linux-sunxi/2018-01-26
[4]: https://github.com/Allwinner-Homlet/H6-BSP4.9-linux/blob/master/drivers/clocksource/arm_arch_timer.c#L272
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stuart Menefy [Sun, 10 Feb 2019 22:51:14 +0000 (22:51 +0000)]
clocksource/drivers/exynos_mct: Clear timer interrupt when shutdown
commit
d2f276c8d3c224d5b493c42b6cf006ae4e64fb1c upstream.
When shutting down the timer, ensure that after we have stopped the
timer any pending interrupts are cleared. This fixes a problem when
suspending, as interrupts are disabled before the timer is stopped,
so the timer interrupt may still be asserted, preventing the system
entering a low power state when the wfi is executed.
Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: <stable@vger.kernel.org> # v4.3+
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stuart Menefy [Sun, 10 Feb 2019 22:51:13 +0000 (22:51 +0000)]
clocksource/drivers/exynos_mct: Move one-shot check from tick clear to ISR
commit
a5719a40aef956ba704f2aa1c7b977224d60fa96 upstream.
When a timer tick occurs and the clock is in one-shot mode, the timer
needs to be stopped to prevent it triggering subsequent interrupts.
Currently this code is in exynos4_mct_tick_clear(), but as it is
only needed when an ISR occurs move it into exynos4_mct_tick_isr(),
leaving exynos4_mct_tick_clear() just doing what its name suggests it
should.
Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stuart Menefy [Tue, 12 Feb 2019 21:51:18 +0000 (21:51 +0000)]
regulator: s2mpa01: Fix step values for some LDOs
commit
28c4f730d2a44f2591cb104091da29a38dac49fe upstream.
The step values for some of the LDOs appears to be incorrect, resulting
in incorrect voltages (or at least, ones which are different from the
Samsung 3.4 vendor kernel).
Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Zhang [Thu, 10 Jan 2019 04:11:16 +0000 (12:11 +0800)]
regulator: max77620: Initialize values for DT properties
commit
0ab66b3c326ef8f77dae9f528118966365757c0c upstream.
If regulator DT node doesn't exist, its of_parse_cb callback
function isn't called. Then all values for DT properties are
filled with zero. This leads to wrong register update for
FPS and POK settings.
Signed-off-by: Jinyoung Park <jinyoungp@nvidia.com>
Signed-off-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Sat, 9 Feb 2019 17:14:14 +0000 (18:14 +0100)]
regulator: s2mps11: Fix steps for buck7, buck8 and LDO35
commit
56b5d4ea778c1b0989c5cdb5406d4a488144c416 upstream.
LDO35 uses 25 mV step, not 50 mV. Bucks 7 and 8 use 12.5 mV step
instead of 6.25 mV. Wrong step caused over-voltage (LDO35) or
under-voltage (buck7 and 8) if regulators were used (e.g. on Exynos5420
Arndale Octa board).
Cc: <stable@vger.kernel.org>
Fixes:
cb74685ecb39 ("regulator: s2mps11: Add samsung s2mps11 regulator driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Tue, 19 Feb 2019 20:21:28 +0000 (23:21 +0300)]
spi: pxa2xx: Setup maximum supported DMA transfer length
commit
ef070b4e4aa25bb5f8632ad196644026c11903bf upstream.
When the commit
b6ced294fb61
("spi: pxa2xx: Switch to SPI core DMA mapping functionality")
switches to SPI core provided DMA helpers, it missed to setup maximum
supported DMA transfer length for the controller and thus users
mistakenly try to send more data than supported with the following
warning:
ili9341 spi-PRP0001:01: DMA disabled for transfer length 153600 greater than 65536
Setup maximum supported DMA transfer length in order to make users know
the limit.
Fixes:
b6ced294fb61 ("spi: pxa2xx: Switch to SPI core DMA mapping functionality")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vignesh R [Tue, 29 Jan 2019 07:44:22 +0000 (13:14 +0530)]
spi: ti-qspi: Fix mmap read when more than one CS in use
commit
673c865efbdc5fec3cc525c46d71844d42c60072 upstream.
Commit
4dea6c9b0b64 ("spi: spi-ti-qspi: add mmap mode read support") has
has got order of parameter wrong when calling regmap_update_bits() to
select CS for mmap access. Mask and value arguments are interchanged.
Code will work on a system with single slave, but fails when more than
one CS is in use. Fix this by correcting the order of parameters when
calling regmap_update_bits().
Fixes:
4dea6c9b0b64 ("spi: spi-ti-qspi: add mmap mode read support")
Cc: stable@vger.kernel.org
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anders Roxell [Wed, 23 Jan 2019 11:48:11 +0000 (12:48 +0100)]
netfilter: ipt_CLUSTERIP: fix warning unused variable cn
commit
206b8cc514d7ff2b79dd2d5ad939adc7c493f07a upstream.
When CONFIG_PROC_FS isn't set the variable cn isn't used.
net/ipv4/netfilter/ipt_CLUSTERIP.c: In function ‘clusterip_net_exit’:
net/ipv4/netfilter/ipt_CLUSTERIP.c:849:24: warning: unused variable ‘cn’ [-Wunused-variable]
struct clusterip_net *cn = clusterip_pernet(net);
^~
Rework so the variable 'cn' is declared inside "#ifdef CONFIG_PROC_FS".
Fixes:
b12f7bad5ad3 ("netfilter: ipt_CLUSTERIP: remove wrong WARN_ON_ONCE in netns exit routine")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiong Wu [Thu, 28 Feb 2019 16:18:33 +0000 (00:18 +0800)]
mmc:fix a bug when max_discard is 0
commit
d4721339dcca7def04909a8e60da43c19a24d8bf upstream.
The original purpose of the code I fix is to replace max_discard with
max_trim if max_trim is less than max_discard. When max_discard is 0
we should replace max_discard with max_trim as well, because
max_discard equals 0 happens only when the max_do_calc_max_discard
process is overflowed, so if mmc_can_trim(card) is true, max_discard
should be replaced by an available max_trim.
However, in the original code, there are two lines of code interfere
the right process.
1) if (max_discard && mmc_can_trim(card))
when max_discard is 0, it skips the process checking if max_discard
needs to be replaced with max_trim.
2) if (max_trim < max_discard)
the condition is false when max_discard is 0. it also skips the process
that replaces max_discard with max_trim, in fact, we should replace the
0-valued max_discard with max_trim.
Signed-off-by: Jiong Wu <Lohengrin1024@gmail.com>
Fixes:
b305882fbc87 (mmc: core: optimize mmc_calc_max_discard)
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
BOUGH CHEN [Thu, 27 Dec 2018 11:20:24 +0000 (11:20 +0000)]
mmc: sdhci-esdhc-imx: fix HS400 timing issue
commit
de0a0decf2edfc5b0c782915f4120cf990a9bd13 upstream.
Now tuning reset will be done when the timing is MMC_TIMING_LEGACY/
MMC_TIMING_MMC_HS/MMC_TIMING_SD_HS. But for timing MMC_TIMING_MMC_HS,
we can not do tuning reset, otherwise HS400 timing is not right.
Here is the process of init HS400, first finish tuning in HS200 mode,
then switch to HS mode and 8 bit DDR mode, finally switch to HS400
mode. If we do tuning reset in HS mode, this will cause HS400 mode
lost the tuning setting, which will cause CRC error.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Cc: stable@vger.kernel.org # v4.12+
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes:
d9370424c948 ("mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Mon, 11 Mar 2019 16:41:03 +0000 (18:41 +0200)]
ACPI / device_sysfs: Avoid OF modalias creation for removed device
commit
f16eb8a4b096514ac06fb25bf599dcc792899b3d upstream.
If SSDT overlay is loaded via ConfigFS and then unloaded the device,
we would like to have OF modalias for, already gone. Thus, acpi_get_name()
returns no allocated buffer for such case and kernel crashes afterwards:
ACPI: Host-directed Dynamic ACPI Table Unload
ads7950 spi-PRP0001:00: Dropping the link to regulator.0
BUG: unable to handle kernel NULL pointer dereference at
0000000000000000
#PF error: [normal kernel read fault]
PGD
80000000070d6067 P4D
80000000070d6067 PUD 70d0067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 40 Comm: kworker/u4:2 Not tainted 5.0.0+ #96
Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
Workqueue: kacpi_hotplug acpi_device_del_work_fn
RIP: 0010:create_of_modalias.isra.1+0x4c/0x150
Code: 00 00 48 89 44 24 18 31 c0 48 8d 54 24 08 48 c7 44 24 10 00 00 00 00 48 c7 44 24 08 ff ff ff ff e8 7a b0 03 00 48 8b 4c 24 10 <0f> b6 01 84 c0 74 27 48 c7 c7 00 09 f4 a5 0f b6 f0 8d 50 20 f6 04
RSP: 0000:
ffffa51040297c10 EFLAGS:
00010246
RAX:
0000000000001001 RBX:
0000000000000785 RCX:
0000000000000000
RDX:
0000000000001001 RSI:
0000000000000286 RDI:
ffffa2163dc042e0
RBP:
ffffa216062b1196 R08:
0000000000001001 R09:
ffffa21639873000
R10:
ffffffffa606761d R11:
0000000000000001 R12:
ffffa21639873218
R13:
ffffa2163deb5060 R14:
ffffa216063d1010 R15:
0000000000000000
FS:
0000000000000000(0000) GS:
ffffa2163e000000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000000 CR3:
0000000007114000 CR4:
00000000001006f0
Call Trace:
__acpi_device_uevent_modalias+0xb0/0x100
spi_uevent+0xd/0x40
...
In order to fix above let create_of_modalias() check the status returned
by acpi_get_name() and bail out in case of failure.
Fixes:
8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201381
Reported-by: Ferry Toth <fntoth@gmail.com>
Tested-by: Ferry Toth<fntoth@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: 4.1+ <stable@vger.kernel.org> # 4.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Juergen Gross [Thu, 7 Mar 2019 09:11:19 +0000 (10:11 +0100)]
xen: fix dom0 boot on huge systems
commit
01bd2ac2f55a1916d81dace12fa8d7ae1c79b5ea upstream.
Commit
f7c90c2aa40048 ("x86/xen: don't write ptes directly in 32-bit
PV guests") introduced a regression for booting dom0 on huge systems
with lots of RAM (in the TB range).
Reason is that on those hosts the p2m list needs to be moved early in
the boot process and this requires temporary page tables to be created.
Said commit modified xen_set_pte_init() to use a hypercall for writing
a PTE, but this requires the page table being in the direct mapped
area, which is not the case for the temporary page tables used in
xen_relocate_p2m().
As the page tables are completely written before being linked to the
actual address space instead of set_pte() a plain write to memory can
be used in xen_relocate_p2m().
Fixes:
f7c90c2aa40048 ("x86/xen: don't write ptes directly in 32-bit PV guests")
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jann Horn [Wed, 20 Feb 2019 16:54:43 +0000 (17:54 +0100)]
tracing/perf: Use strndup_user() instead of buggy open-coded version
commit
83540fbc8812a580b6ad8f93f4c29e62e417687e upstream.
The first version of this method was missing the check for
`ret == PATH_MAX`; then such a check was added, but it didn't call kfree()
on error, so there was still a small memory leak in the error case.
Fix it by using strndup_user() instead of open-coding it.
Link: http://lkml.kernel.org/r/20190220165443.152385-1-jannh@google.com
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Fixes:
0eadcc7a7bc0 ("perf/core: Fix perf_uprobe_init()")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zhangyi (F) [Wed, 13 Feb 2019 12:29:06 +0000 (20:29 +0800)]
tracing: Do not free iter->trace in fail path of tracing_open_pipe()
commit
e7f0c424d0806b05d6f47be9f202b037eb701707 upstream.
Commit
d716ff71dd12 ("tracing: Remove taking of trace_types_lock in
pipe files") use the current tracer instead of the copy in
tracing_open_pipe(), but it forget to remove the freeing sentence in
the error path.
There's an error path that can call kfree(iter->trace) after the iter->trace
was assigned to tr->current_trace, which would be bad to free.
Link: http://lkml.kernel.org/r/1550060946-45984-1-git-send-email-yi.zhang@huawei.com
Cc: stable@vger.kernel.org
Fixes:
d716ff71dd12 ("tracing: Remove taking of trace_types_lock in pipe files")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tom Zanussi [Mon, 4 Feb 2019 21:07:24 +0000 (15:07 -0600)]
tracing: Use strncpy instead of memcpy for string keys in hist triggers
commit
9f0bbf3115ca9f91f43b7c74e9ac7d79f47fc6c2 upstream.
Because there may be random garbage beyond a string's null terminator,
it's not correct to copy the the complete character array for use as a
hist trigger key. This results in multiple histogram entries for the
'same' string key.
So, in the case of a string key, use strncpy instead of memcpy to
avoid copying in the extra bytes.
Before, using the gdbus entries in the following hist trigger as an
example:
# echo 'hist:key=comm' > /sys/kernel/debug/tracing/events/sched/sched_waking/trigger
# cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist
...
{ comm: ImgDecoder #4 } hitcount: 203
{ comm: gmain } hitcount: 213
{ comm: gmain } hitcount: 216
{ comm: StreamTrans #73 } hitcount: 221
{ comm: mozStorage #3 } hitcount: 230
{ comm: gdbus } hitcount: 233
{ comm: StyleThread#5 } hitcount: 253
{ comm: gdbus } hitcount: 256
{ comm: gdbus } hitcount: 260
{ comm: StyleThread#4 } hitcount: 271
...
# cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist | egrep gdbus | wc -l
51
After:
# cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist | egrep gdbus | wc -l
1
Link: http://lkml.kernel.org/r/50c35ae1267d64eee975b8125e151e600071d4dc.1549309756.git.tom.zanussi@linux.intel.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Fixes:
79e577cbce4c4 ("tracing: Support string type key properly")
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Shilovsky [Tue, 5 Mar 2019 01:48:01 +0000 (17:48 -0800)]
CIFS: Fix read after write for files with read caching
commit
6dfbd84684700cb58b34e8602c01c12f3d2595c8 upstream.
When we have a READ lease for a file and have just issued a write
operation to the server we need to purge the cache and set oplock/lease
level to NONE to avoid reading stale data. Currently we do that
only if a write operation succedeed thus not covering cases when
a request was sent to the server but a negative error code was
returned later for some other reasons (e.g. -EIOCBQUEUED or -EINTR).
Fix this by turning off caching regardless of the error code being
returned.
The patches fixes generic tests 075 and 112 from the xfs-tests.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Shilovsky [Mon, 4 Mar 2019 22:02:50 +0000 (14:02 -0800)]
CIFS: Do not skip SMB2 message IDs on send failures
commit
c781af7e0c1fed9f1d0e0ec31b86f5b21a8dca17 upstream.
When we hit failures during constructing MIDs or sending PDUs
through the network, we end up not using message IDs assigned
to the packet. The next SMB packet will skip those message IDs
and continue with the next one. This behavior may lead to a server
not granting us credits until we use the skipped IDs. Fix this by
reverting the current ID to the original value if any errors occur
before we push the packet through the network stack.
This patch fixes the generic/310 test from the xfs-tests.
Cc: <stable@vger.kernel.org> # 4.19.x
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Shilovsky [Wed, 13 Feb 2019 23:43:08 +0000 (15:43 -0800)]
CIFS: Do not reset lease state to NONE on lease break
commit
7b9b9edb49ad377b1e06abf14354c227e9ac4b06 upstream.
Currently on lease break the client sets a caching level twice:
when oplock is detected and when oplock is processed. While the
1st attempt sets the level to the value provided by the server,
the 2nd one resets the level to None unconditionally.
This happens because the oplock/lease processing code was changed
to avoid races between page cache flushes and oplock breaks.
The commit
c11f1df5003d534 ("cifs: Wait for writebacks to complete
before attempting write.") fixed the races for oplocks but didn't
apply the same changes for leases resulting in overwriting the
server granted value to None. Fix this by properly processing
lease breaks.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ard Biesheuvel [Thu, 24 Jan 2019 16:33:46 +0000 (17:33 +0100)]
crypto: arm64/aes-ccm - fix bugs in non-NEON fallback routine
commit
969e2f59d589c15f6aaf306e590dde16f12ea4b3 upstream.
Commit
5092fcf34908 ("crypto: arm64/aes-ce-ccm: add non-SIMD generic
fallback") introduced C fallback code to replace the NEON routines
when invoked from a context where the NEON is not available (i.e.,
from the context of a softirq taken while the NEON is already being
used in kernel process context)
Fix two logical flaws in the MAC calculation of the associated data.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes:
5092fcf34908 ("crypto: arm64/aes-ce-ccm: add non-SIMD generic fallback")
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ard Biesheuvel [Thu, 24 Jan 2019 16:33:45 +0000 (17:33 +0100)]
crypto: arm64/aes-ccm - fix logical bug in AAD MAC handling
commit
eaf46edf6ea89675bd36245369c8de5063a0272c upstream.
The NEON MAC calculation routine fails to handle the case correctly
where there is some data in the buffer, and the input fills it up
exactly. In this case, we enter the loop at the end with w8 == 0,
while a negative value is assumed, and so the loop carries on until
the increment of the 32-bit counter wraps around, which is quite
obviously wrong.
So omit the loop altogether in this case, and exit right away.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes:
a3fd82105b9d1 ("arm64/crypto: AES in CCM mode using ARMv8 Crypto ...")
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 1 Feb 2019 07:51:39 +0000 (23:51 -0800)]
crypto: x86/morus - fix handling chunked inputs and MAY_SLEEP
commit
2060e284e9595fc3baed6e035903c05b93266555 upstream.
The x86 MORUS implementations all fail the improved AEAD tests because
they produce the wrong result with some data layouts. The issue is that
they assume that if the skcipher_walk API gives 'nbytes' not aligned to
the walksize (a.k.a. walk.stride), then it is the end of the data. In
fact, this can happen before the end.
Also, when the CRYPTO_TFM_REQ_MAY_SLEEP flag is given, they can
incorrectly sleep in the skcipher_walk_*() functions while preemption
has been disabled by kernel_fpu_begin().
Fix these bugs.
Fixes:
56e8e57fc3a7 ("crypto: morus - Add common SIMD glue code for MORUS")
Cc: <stable@vger.kernel.org> # v4.18+
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 1 Feb 2019 07:51:40 +0000 (23:51 -0800)]
crypto: x86/aesni-gcm - fix crash on empty plaintext
commit
3af349639597fea582a93604734d717e59a0e223 upstream.
gcmaes_crypt_by_sg() dereferences the NULL pointer returned by
scatterwalk_ffwd() when encrypting an empty plaintext and the source
scatterlist ends immediately after the associated data.
Fix it by only fast-forwarding to the src/dst data scatterlists if the
data length is nonzero.
This bug is reproduced by the "rfc4543(gcm(aes))" test vectors when run
with the new AEAD test manager.
Fixes:
e845520707f8 ("crypto: aesni - Update aesni-intel_glue to use scatter/gather")
Cc: <stable@vger.kernel.org> # v4.17+
Cc: Dave Watson <davejwatson@fb.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 1 Feb 2019 07:51:38 +0000 (23:51 -0800)]
crypto: x86/aegis - fix handling chunked inputs and MAY_SLEEP
commit
ba6771c0a0bc2fac9d6a8759bab8493bd1cffe3b upstream.
The x86 AEGIS implementations all fail the improved AEAD tests because
they produce the wrong result with some data layouts. The issue is that
they assume that if the skcipher_walk API gives 'nbytes' not aligned to
the walksize (a.k.a. walk.stride), then it is the end of the data. In
fact, this can happen before the end.
Also, when the CRYPTO_TFM_REQ_MAY_SLEEP flag is given, they can
incorrectly sleep in the skcipher_walk_*() functions while preemption
has been disabled by kernel_fpu_begin().
Fix these bugs.
Fixes:
1d373d4e8e15 ("crypto: x86 - Add optimized AEGIS implementations")
Cc: <stable@vger.kernel.org> # v4.18+
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Thu, 24 Jan 2019 04:57:35 +0000 (20:57 -0800)]
crypto: testmgr - skip crc32c context test for ahash algorithms
commit
eb5e6730db98fcc4b51148b4a819fa4bf864ae54 upstream.
Instantiating "cryptd(crc32c)" causes a crypto self-test failure because
the crypto_alloc_shash() in alg_test_crc32c() fails. This is because
cryptd(crc32c) is an ahash algorithm, not a shash algorithm; so it can
only be accessed through the ahash API, unlike shash algorithms which
can be accessed through both the ahash and shash APIs.
As the test is testing the shash descriptor format which is only
applicable to shash algorithms, skip it for ahash algorithms.
(Note that it's still important to fix crypto self-test failures even
for weird algorithm instantiations like cryptd(crc32c) that no one
would really use; in fips_enabled mode unprivileged users can use them
to panic the kernel, and also they prevent treating a crypto self-test
failure as a bug when fuzzing the kernel.)
Fixes:
8e3ee85e68c5 ("crypto: crc32c - Test descriptor context format")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Mon, 7 Jan 2019 02:47:43 +0000 (18:47 -0800)]
crypto: skcipher - set CRYPTO_TFM_NEED_KEY if ->setkey() fails
commit
b1f6b4bf416b49f00f3abc49c639371cdecaaad1 upstream.
Some algorithms have a ->setkey() method that is not atomic, in the
sense that setting a key can fail after changes were already made to the
tfm context. In this case, if a key was already set the tfm can end up
in a state that corresponds to neither the old key nor the new key.
For example, in lrw.c, if gf128mul_init_64k_bbe() fails due to lack of
memory, then priv::table will be left NULL. After that, encryption with
that tfm will cause a NULL pointer dereference.
It's not feasible to make all ->setkey() methods atomic, especially ones
that have to key multiple sub-tfms. Therefore, make the crypto API set
CRYPTO_TFM_NEED_KEY if ->setkey() fails and the algorithm requires a
key, to prevent the tfm from being used until a new key is set.
[Cc stable mainly because when introducing the NEED_KEY flag I changed
AF_ALG to rely on it; and unlike in-kernel crypto API users, AF_ALG
previously didn't have this problem. So these "incompletely keyed"
states became theoretically accessible via AF_ALG -- though, the
opportunities for causing real mischief seem pretty limited.]
Fixes:
f8d33fac8480 ("crypto: skcipher - prevent using skciphers without setting key")
Cc: <stable@vger.kernel.org> # v4.16+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 4 Jan 2019 04:16:13 +0000 (20:16 -0800)]
crypto: pcbc - remove bogus memcpy()s with src == dest
commit
251b7aea34ba3c4d4fdfa9447695642eb8b8b098 upstream.
The memcpy()s in the PCBC implementation use walk->iv as both the source
and destination, which has undefined behavior. These memcpy()'s are
actually unneeded, because walk->iv is already used to hold the previous
plaintext block XOR'd with the previous ciphertext block. Thus,
walk->iv is already updated to its final value.
So remove the broken and unnecessary memcpy()s.
Fixes:
91652be5d1b9 ("[CRYPTO] pcbc: Add Propagated CBC template")
Cc: <stable@vger.kernel.org> # v2.6.21+
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 1 Feb 2019 07:51:37 +0000 (23:51 -0800)]
crypto: morus - fix handling chunked inputs
commit
d644f1c8746ed24f81075480f9e9cb3777ae8d65 upstream.
The generic MORUS implementations all fail the improved AEAD tests
because they produce the wrong result with some data layouts. The issue
is that they assume that if the skcipher_walk API gives 'nbytes' not
aligned to the walksize (a.k.a. walk.stride), then it is the end of the
data. In fact, this can happen before the end. Fix them.
Fixes:
396be41f16fd ("crypto: morus - Add generic MORUS AEAD implementations")
Cc: <stable@vger.kernel.org> # v4.18+
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Mon, 7 Jan 2019 02:47:42 +0000 (18:47 -0800)]
crypto: hash - set CRYPTO_TFM_NEED_KEY if ->setkey() fails
commit
ba7d7433a0e998c902132bd47330e355a1eaa894 upstream.
Some algorithms have a ->setkey() method that is not atomic, in the
sense that setting a key can fail after changes were already made to the
tfm context. In this case, if a key was already set the tfm can end up
in a state that corresponds to neither the old key nor the new key.
It's not feasible to make all ->setkey() methods atomic, especially ones
that have to key multiple sub-tfms. Therefore, make the crypto API set
CRYPTO_TFM_NEED_KEY if ->setkey() fails and the algorithm requires a
key, to prevent the tfm from being used until a new key is set.
Note: we can't set CRYPTO_TFM_NEED_KEY for OPTIONAL_KEY algorithms, so
->setkey() for those must nevertheless be atomic. That's fine for now
since only the crc32 and crc32c algorithms set OPTIONAL_KEY, and it's
not intended that OPTIONAL_KEY be used much.
[Cc stable mainly because when introducing the NEED_KEY flag I changed
AF_ALG to rely on it; and unlike in-kernel crypto API users, AF_ALG
previously didn't have this problem. So these "incompletely keyed"
states became theoretically accessible via AF_ALG -- though, the
opportunities for causing real mischief seem pretty limited.]
Fixes:
9fa68f620041 ("crypto: hash - prevent using keyed hashes without setting key")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ard Biesheuvel [Sun, 27 Jan 2019 09:16:53 +0000 (10:16 +0100)]
crypto: arm64/crct10dif - revert to C code for short inputs
commit
d72b9d4acd548251f55b16843fc7a05dc5c80de8 upstream.
The SIMD routine ported from x86 used to have a special code path
for inputs < 16 bytes, which got lost somewhere along the way.
Instead, the current glue code aligns the input pointer to 16 bytes,
which is not really necessary on this architecture (although it
could be beneficial to performance to expose aligned data to the
the NEON routine), but this could result in inputs of less than
16 bytes to be passed in. This not only fails the new extended
tests that Eric has implemented, it also results in the code
reading past the end of the input, which could potentially result
in crashes when dealing with less than 16 bytes of input at the
end of a page which is followed by an unmapped page.
So update the glue code to only invoke the NEON routine if the
input is at least 16 bytes.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Fixes:
6ef5737f3931 ("crypto: arm64/crct10dif - port x86 SSE implementation to arm64")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 1 Feb 2019 07:51:42 +0000 (23:51 -0800)]
crypto: arm64/aes-neonbs - fix returning final keystream block
commit
12455e320e19e9cc7ad97f4ab89c280fe297387c upstream.
The arm64 NEON bit-sliced implementation of AES-CTR fails the improved
skcipher tests because it sometimes produces the wrong ciphertext. The
bug is that the final keystream block isn't returned from the assembly
code when the number of non-final blocks is zero. This can happen if
the input data ends a few bytes after a page boundary. In this case the
last bytes get "encrypted" by XOR'ing them with uninitialized memory.
Fix the assembly code to return the final keystream block when needed.
Fixes:
88a3f582bea9 ("crypto: arm64/aes - don't use IV buffer to return final keystream block")
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ard Biesheuvel [Sun, 27 Jan 2019 09:16:52 +0000 (10:16 +0100)]
crypto: arm/crct10dif - revert to C code for short inputs
commit
62fecf295e3c48be1b5f17c440b93875b9adb4d6 upstream.
The SIMD routine ported from x86 used to have a special code path
for inputs < 16 bytes, which got lost somewhere along the way.
Instead, the current glue code aligns the input pointer to permit
the NEON routine to use special versions of the vld1 instructions
that assume 16 byte alignment, but this could result in inputs of
less than 16 bytes to be passed in. This not only fails the new
extended tests that Eric has implemented, it also results in the
code reading past the end of the input, which could potentially
result in crashes when dealing with less than 16 bytes of input
at the end of a page which is followed by an unmapped page.
So update the glue code to only invoke the NEON routine if the
input is at least 16 bytes.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Fixes:
1d481f1cd892 ("crypto: arm/crct10dif - port x86 SSE implementation to ARM")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 1 Feb 2019 07:51:36 +0000 (23:51 -0800)]
crypto: aegis - fix handling chunked inputs
commit
0f533e67d26f228ea5dfdacc8a4bdeb487af5208 upstream.
The generic AEGIS implementations all fail the improved AEAD tests
because they produce the wrong result with some data layouts. The issue
is that they assume that if the skcipher_walk API gives 'nbytes' not
aligned to the walksize (a.k.a. walk.stride), then it is the end of the
data. In fact, this can happen before the end. Fix them.
Fixes:
f606a88e5823 ("crypto: aegis - Add generic AEGIS AEAD implementations")
Cc: <stable@vger.kernel.org> # v4.18+
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Mon, 7 Jan 2019 02:47:44 +0000 (18:47 -0800)]
crypto: aead - set CRYPTO_TFM_NEED_KEY if ->setkey() fails
commit
6ebc97006b196aafa9df0497fdfa866cf26f259b upstream.
Some algorithms have a ->setkey() method that is not atomic, in the
sense that setting a key can fail after changes were already made to the
tfm context. In this case, if a key was already set the tfm can end up
in a state that corresponds to neither the old key nor the new key.
For example, in gcm.c, if the kzalloc() fails due to lack of memory,
then the CTR part of GCM will have the new key but GHASH will not.
It's not feasible to make all ->setkey() methods atomic, especially ones
that have to key multiple sub-tfms. Therefore, make the crypto API set
CRYPTO_TFM_NEED_KEY if ->setkey() fails, to prevent the tfm from being
used until a new key is set.
[Cc stable mainly because when introducing the NEED_KEY flag I changed
AF_ALG to rely on it; and unlike in-kernel crypto API users, AF_ALG
previously didn't have this problem. So these "incompletely keyed"
states became theoretically accessible via AF_ALG -- though, the
opportunities for causing real mischief seem pretty limited.]
Fixes:
dc26c17f743a ("crypto: aead - prevent using AEADs without setting key")
Cc: <stable@vger.kernel.org> # v4.16+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sun, 6 Jan 2019 16:41:29 +0000 (11:41 -0500)]
fix cgroup_do_mount() handling of failure exits
commit
399504e21a10be16dd1408ba0147367d9d82a10c upstream.
same story as with last May fixes in sysfs (
7b745a4e4051
"unfuck sysfs_mount()"); new_sb is left uninitialized
in case of early errors in kernfs_mount_ns() and papering
over it by treating any error from kernfs_mount_ns() as
equivalent to !new_ns ends up conflating the cases when
objects had never been transferred to a superblock with
ones when that has happened and resulting new superblock
had been dropped. Easily fixed (same way as in sysfs
case). Additionally, there's a superblock leak on
kernfs_node_dentry() failure *and* a dentry leak inside
kernfs_node_dentry() itself - the latter on probably
impossible errors, but the former not impossible to trigger
(as the matter of fact, injecting allocation failures
at that point *does* trigger it).
Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver O'Halloran [Wed, 6 Feb 2019 02:04:53 +0000 (13:04 +1100)]
libnvdimm: Fix altmap reservation size calculation
commit
07464e88365e9236febaca9ed1a2e2006d8bc952 upstream.
Libnvdimm reserves the first 8K of pfn and devicedax namespaces to
store a superblock describing the namespace. This 8K reservation
is contained within the altmap area which the kernel uses for the
vmemmap backing for the pages within the namespace. The altmap
allows for some pages at the start of the altmap area to be reserved
and that mechanism is used to protect the superblock from being
re-used as vmemmap backing.
The number of PFNs to reserve is calculated using:
PHYS_PFN(SZ_8K)
Which is implemented as:
#define PHYS_PFN(x) ((unsigned long)((x) >> PAGE_SHIFT))
So on systems where PAGE_SIZE is greater than 8K the reservation
size is truncated to zero and the superblock area is re-used as
vmemmap backing. As a result all the namespace information stored
in the superblock (i.e. if it's a PFN or DAX namespace) is lost
and the namespace needs to be re-created to get access to the
contents.
This patch fixes this by using PFN_UP() rather than PHYS_PFN() to ensure
that at least one page is reserved. On systems with a 4K pages size this
patch should have no effect.
Cc: stable@vger.kernel.org
Cc: Dan Williams <dan.j.williams@intel.com>
Fixes:
ac515c084be9 ("libnvdimm, pmem, pfn: move pfn setup to the core")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Fri, 25 Jan 2019 01:33:06 +0000 (17:33 -0800)]
libnvdimm/pmem: Honor force_raw for legacy pmem regions
commit
fa7d2e639cd90442d868dfc6ca1d4cc9d8bf206e upstream.
For recovery, where non-dax access is needed to a given physical address
range, and testing, allow the 'force_raw' attribute to override the
default establishment of a dev_pagemap.
Otherwise without this capability it is possible to end up with a
namespace that can not be activated due to corrupted info-block, and one
that can not be repaired due to a section collision.
Cc: <stable@vger.kernel.org>
Fixes:
004f1afbe199 ("libnvdimm, pmem: direct map legacy pmem by default")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yang [Tue, 22 Jan 2019 02:48:09 +0000 (10:48 +0800)]
libnvdimm, pfn: Fix over-trim in trim_pfn_device()
commit
f101ada7da6551127d192c2f1742c1e9e0f62799 upstream.
When trying to see whether current nd_region intersects with others,
trim_pfn_device() has already calculated the *size* to be expanded to
SECTION size.
Do not double append 'adjust' to 'size' when calculating whether the end
of a region collides with the next pmem region.
Fixes:
ae86cbfef381 "libnvdimm, pfn: Pad pfn namespaces relative to other regions"
Cc: <stable@vger.kernel.org>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Tue, 15 Jan 2019 18:47:00 +0000 (10:47 -0800)]
libnvdimm/label: Clear 'updating' flag after label-set update
commit
966d23a006ca7b44ac8cf4d0c96b19785e0c3da0 upstream.
The UEFI 2.7 specification sets expectations that the 'updating' flag is
eventually cleared. To date, the libnvdimm core has never adhered to
that protocol. The policy of the core matches the policy of other
multi-device info-block formats like MD-Software-RAID that expect
administrator intervention on inconsistent info-blocks, not automatic
invalidation.
However, some pre-boot environments may unfortunately attempt to "clean
up" the labels and invalidate a set when it fails to find at least one
"non-updating" label in the set. Clear the updating flag after set
updates to minimize the window of vulnerability to aggressive pre-boot
environments.
Ideally implementations would not write to the label area outside of
creating namespaces.
Note that this only minimizes the window, it does not close it as the
system can still crash while clearing the flag and the set can be
subsequently deleted / invalidated by the pre-boot environment.
Fixes:
f524bf271a5c ("libnvdimm: write pmem label set")
Cc: <stable@vger.kernel.org>
Cc: Kelly Couch <kelly.j.couch@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Wed, 13 Feb 2019 17:01:13 +0000 (09:01 -0800)]
nfit/ars: Attempt short-ARS even in the no_init_ars case
commit
fa3ed4d981b1fc19acdd07fcb152a4bd3706892b upstream.
The no_init_ars option is meant to prevent long-ARS, but short-ARS
should be allowed to grab any immediate results.
Fixes:
bc6ba8085842 ("nfit, address-range-scrub: rework and simplify ARS...")
Cc: <stable@vger.kernel.org>
Reported-by: Erwin Tsaur <erwin.tsaur@oracle.com>
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Wed, 13 Feb 2019 16:58:40 +0000 (08:58 -0800)]
nfit/ars: Attempt a short-ARS whenever the ARS state is idle at boot
commit
c6c5df293bf1b488cf8459aac658aecfdccb13a9 upstream.
If query-ARS reports that ARS has stopped and requires continuation
attempt to retrieve short-ARS results before continuing the long
operation.
Fixes:
bc6ba8085842 ("nfit, address-range-scrub: rework and simplify ARS...")
Cc: <stable@vger.kernel.org>
Reported-by: Krzysztof Rusocki <krzysztof.rusocki@intel.com>
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Thu, 7 Feb 2019 22:56:50 +0000 (14:56 -0800)]
acpi/nfit: Fix bus command validation
commit
ebe9f6f19d80d8978d16078dff3d5bd93ad8d102 upstream.
Commit
11189c1089da "acpi/nfit: Fix command-supported detection" broke
ND_CMD_CALL for bus-level commands. The "func = cmd" assumption is only
valid for:
ND_CMD_ARS_CAP
ND_CMD_ARS_START
ND_CMD_ARS_STATUS
ND_CMD_CLEAR_ERROR
The function number otherwise needs to be pulled from the command
payload for:
NFIT_CMD_TRANSLATE_SPA
NFIT_CMD_ARS_INJECT_SET
NFIT_CMD_ARS_INJECT_CLEAR
NFIT_CMD_ARS_INJECT_GET
Update cmd_to_func() for the bus case and call it in the common path.
Fixes:
11189c1089da ("acpi/nfit: Fix command-supported detection")
Cc: <stable@vger.kernel.org>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reported-by: Grzegorz Burzynski <grzegorz.burzynski@intel.com>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dexuan Cui [Wed, 30 Jan 2019 01:23:01 +0000 (01:23 +0000)]
nfit: acpi_nfit_ctl(): Check out_obj->type in the right place
commit
43f89877f26671c6309cd87d7364b1a3e66e71cf upstream.
In the case of ND_CMD_CALL, we should also check out_obj->type.
The patch uses out_obj->type, which is a short alias to
out_obj->package.type.
Fixes:
31eca76ba2fc ("nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Thu, 21 Feb 2019 12:19:17 +0000 (14:19 +0200)]
stm class: Prevent division by zero
commit
bf7cbaae0831252b416f375ca9b1027ecd4642dd upstream.
Using STP_POLICY_ID_SET ioctl command with dummy_stm device, or any STM
device that supplies zero mmio channel size, will trigger a division by
zero bug in the kernel.
Prevent this by disallowing channel widths other than 1 for such devices.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes:
7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices")
CC: stable@vger.kernel.org # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Darrick J. Wong [Sat, 23 Feb 2019 06:35:32 +0000 (22:35 -0800)]
tmpfs: fix uninitialized return value in shmem_link
[ Upstream commit
29b00e609960ae0fcff382f4c7079dd0874a5311 ]
When we made the shmem_reserve_inode call in shmem_link conditional, we
forgot to update the declaration for ret so that it always has a known
value. Dan Carpenter pointed out this deficiency in the original patch.
Fixes:
1062af920c07 ("tmpfs: fix link accounting when a tmpfile is linked in")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Matej Kupljen <matej.kupljen@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thadeu Lima de Souza Cascardo [Fri, 22 Feb 2019 10:27:41 +0000 (07:27 -0300)]
selftests: fib_tests: sleep after changing carrier. again.
[ Upstream commit
af548a27b158d548d41e56255e6eaca1658cc3be ]
Just like commit
e2ba732a1681 ("selftests: fib_tests: sleep after
changing carrier"), wait one second to allow linkwatch to propagate the
carrier change to the stack.
There are two sets of carrier tests. The first slept after the carrier
was set to off, and when the second set ran, it was likely that the
linkwatch would be able to run again without much delay, reducing the
likelihood of a race. However, if you run 'fib_tests.sh -t carrier' on a
loop, you will quickly notice the failures.
Sleeping on the second set of tests make the failures go away.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mao Wenan [Fri, 22 Feb 2019 06:57:23 +0000 (14:57 +0800)]
net: set static variable an initial value in atl2_probe()
[ Upstream commit
4593403fa516a5a4cffe6883c5062d60932cbfbe ]
cards_found is a static variable, but when it enters atl2_probe(),
cards_found is set to zero, the value is not consistent with last probe,
so next behavior is not our expect.
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Chan [Thu, 21 Feb 2019 00:07:32 +0000 (19:07 -0500)]
bnxt_en: Wait longer for the firmware message response to complete.
[ Upstream commit
0000b81a063b5f3ab82fa18041c28327ce72c312 ]
The code waits up to 20 usec for the firmware response to complete
once we've seen the valid response header in the buffer. It turns
out that in some scenarios, this wait time is not long enough.
Extend it to 150 usec and use usleep_range() instead of udelay().
Fixes:
9751e8e71487 ("bnxt_en: reduce timeout on initial HWRM calls")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Chan [Thu, 21 Feb 2019 00:07:31 +0000 (19:07 -0500)]
bnxt_en: Fix typo in firmware message timeout logic.
[ Upstream commit
67681d02aaa1db9044a16df4ca9c77cde1221a3e ]
The logic that polls for the firmware message response uses a shorter
sleep interval for the first few passes. But there was a typo so it
was using the wrong counter (larger counter) for these short sleep
passes. The result is a slightly shorter timeout period for these
firmware messages than intended. Fix it by using the proper counter.
Fixes:
9751e8e71487 ("bnxt_en: reduce timeout on initial HWRM calls")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiong Wang [Fri, 22 Feb 2019 22:36:04 +0000 (22:36 +0000)]
nfp: bpf: fix ALU32 high bits clearance bug
[ Upstream commit
f036ebd9bfbe1e91a3d855e85e05fc5ff156b641 ]
NFP BPF JIT compiler is doing a couple of small optimizations when jitting
ALU imm instructions, some of these optimizations could save code-gen, for
example:
A & -1 = A
A | 0 = A
A ^ 0 = A
However, for ALU32, high 32-bit of the 64-bit register should still be
cleared according to ISA semantics.
Fixes:
cd7df56ed3e6 ("nfp: add BPF to NFP code translator")
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiong Wang [Fri, 22 Feb 2019 22:36:03 +0000 (22:36 +0000)]
nfp: bpf: fix code-gen bug on BPF_ALU | BPF_XOR | BPF_K
[ Upstream commit
71c190249f0ced5b26377ea6bf829ab3af77a40c ]
The intended optimization should be A ^ 0 = A, not A ^ -1 = A.
Fixes:
cd7df56ed3e6 ("nfp: add BPF to NFP code translator")
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vadim Lomovtsev [Wed, 20 Feb 2019 11:02:44 +0000 (11:02 +0000)]
net: thunderx: add nicvf_send_msg_to_pf result check for set_rx_mode_task
[ Upstream commit
7db730d9d2f7b6af6aeac621b1890ea477a0cb8d ]
The rx_set_mode invokes number of messages to be send to PF for receive
mode configuration. In case if there any issues we need to stop sending
messages and release allocated memory.
This commit is to implement check of nicvf_msg_send_to_pf() result.
Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vadim Lomovtsev [Wed, 20 Feb 2019 11:02:43 +0000 (11:02 +0000)]
net: thunderx: make CFG_DONE message to run through generic send-ack sequence
[ Upstream commit
0dd563b9a62c4cbabf5d4fd6596440c2491e72b1 ]
At the end of NIC VF initialization VF sends CFG_DONE message to PF without
using nicvf_msg_send_to_pf routine. This potentially could re-write data in
mailbox. This commit is to implement common way of sending CFG_DONE message
by the same way with other configuration messages by using
nicvf_send_msg_to_pf() routine.
Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alban Crequy [Fri, 22 Feb 2019 13:19:08 +0000 (14:19 +0100)]
bpf, lpm: fix lookup bug in map_delete_elem
[ Upstream commit
7c0cdf0b3940f63d9777c3fcf250a2f83859ca54 ]
trie_delete_elem() was deleting an entry even though it was not matching
if the prefixlen was correct. This patch adds a check on matchlen.
Reproducer:
$ sudo bpftool map create /sys/fs/bpf/mylpm type lpm_trie key 8 value 1 entries 128 name mylpm flags 1
$ sudo bpftool map update pinned /sys/fs/bpf/mylpm key hex 10 00 00 00 aa bb cc dd value hex 01
$ sudo bpftool map dump pinned /sys/fs/bpf/mylpm
key: 10 00 00 00 aa bb cc dd value: 01
Found 1 element
$ sudo bpftool map delete pinned /sys/fs/bpf/mylpm key hex 10 00 00 00 ff ff ff ff
$ echo $?
0
$ sudo bpftool map dump pinned /sys/fs/bpf/mylpm
Found 0 elements
A similar reproducer is added in the selftests.
Without the patch:
$ sudo ./tools/testing/selftests/bpf/test_lpm_map
test_lpm_map: test_lpm_map.c:485: test_lpm_delete: Assertion `bpf_map_delete_elem(map_fd, key) == -1 && errno == ENOENT' failed.
Aborted
With the patch: test_lpm_map runs without errors.
Fixes:
e454cf595853 ("bpf: Implement map_delete_elem for BPF_MAP_TYPE_LPM_TRIE")
Cc: Craig Gallek <kraig@google.com>
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Acked-by: Craig Gallek <kraig@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>