review.tizen.org Git - platform/kernel/linux-starfive.git/log

Bluetooth: btusb: Do not require hardcoded interface numbers

Remove hardcoded interface number check because Bluetooth specification
since version 4.0 only recommends and no longer requires specific
interface numbers.

While earlier Bluetooth versions, i.e. 2.1 + EDR and 3.0 + HS, contain
required configuration table in Volume 4 - Host Controller Interface
Part B - USB Transport Layer, Bluetooth Core Specification Addendum 2
changes the table from required to recommended configuration.

Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: MGMT: Use BIT macro when defining bitfields

This makes use of BIT macro when defining bitfields which makes it
clearer what bit it is toggling.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Merge branch 'act_pedit-minor-improvements'

Pedro Tammela says:

====================
net/sched: act_pedit: minor improvements

This series aims to improve the code and usability of act_pedit for
netlink users.

Patches 1-2 improves error reporting for extended keys parsing with extack.

Patch 3 checks the static offsets a priori on create/update. Currently,
this is done at the datapath for both static and runtime offsets.

Patch 4 removes a check from the datapath which is redundant since the
netlink parsing validates the key types.

Patch 5 changes the 'pr_info()' calls in the datapath to rate limited
versions.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_pedit: rate limit datapath messages

Unbounded info messages in the pedit datapath can flood the printk
ring buffer quite easily depending on the action created.
As these messages are informational, usually printing some, not all,
is enough to bring attention to the real issue.

Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_pedit: remove extra check for key type

The netlink parsing already validates the key 'htype'.
Remove the datapath check as it's redundant.

Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_pedit: check static offsets a priori

Static key offsets should always be on 32 bit boundaries. Validate them on
create/update time for static offsets and move the datapath validation
for runtime offsets only.

iproute2 already errors out if a given offset and data size cannot be
packed to a 32 bit boundary. This change will make sure users which
create/update pedit instances directly via netlink also error out,
instead of finding out when packets are traversing.

Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_pedit: use extack in 'ex' parsing errors

We have extack available when parsing 'ex' keys, so pass it to
tcf_pedit_keys_ex_parse and add more detailed error messages.

Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_pedit: use NLA_POLICY for parsing 'ex' keys

Transform two checks in the 'ex' key parsing into netlink policies
removing extra if checks.

Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: Print msecs when transmit queue time out

The kernel will print several warnings in a short period of time
when it stalls. Like this:

First warning:
[ 7100.097547] ------------[ cut here ]------------
[ 7100.097550] NETDEV WATCHDOG: eno2 (xxx): transmit queue 8 timed out
[ 7100.097571] WARNING: CPU: 8 PID: 0 at net/sched/sch_generic.c:467
                       dev_watchdog+0x260/0x270
...

Second warning:
[ 7147.756952] rcu: INFO: rcu_preempt self-detected stall on CPU
[ 7147.756958] rcu:   24-....: (59999 ticks this GP) idle=546/1/0x400000000000000
                      softirq=367      3137/3673146 fqs=13844
[ 7147.756960]        (t=60001 jiffies g=4322709 q=133381)
[ 7147.756962] NMI backtrace for cpu 24
...

We calculate that the transmit queue start stall should occur before
7095s according to watchdog_timeo, the rcu start stall at 7087s.
These two times are close together, it is difficult to confirm which
happened first.

To let users know the exact time the stall started, print msecs when
the transmit queue time out.

Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'dsa-skb_mac_header'

Vladimir Oltean says:

====================
Remove skb_mac_header() dependency in DSA xmit path

Eric started working on removing skb_mac_header() assumptions from the
networking xmit path, and I offered to help for DSA:
https://lore.kernel.org/netdev/20230321164519.1286357-1-edumazet@google.com/

The majority of this patch set is a straightforward replacement of
skb_mac_header() with skb->data (hidden either behind skb_eth_hdr(), or
behind skb_vlan_eth_hdr()). The only patch which is more "interesting"
is 9/9.

Another potential caller of __skb_vlan_pop() on xmit (and therefore
also of skb_mac_header()) is tcf_vlan_act(), but I haven't had the time
to investigate that (enough to submit changes other than what's here).

v1->v2:
- 09/09: document the vlan_tci argument of vlan_remove_tag() in the kdoc

v1 at:
https://lore.kernel.org/netdev/20230322233823.1806736-1-vladimir.oltean@nxp.com/

Cc: Madalin Bucur <madalin.bucur@nxp.com>
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: tag_ocelot: call only the relevant portion of __skb_vlan_pop() on TX

ocelot_xmit_get_vlan_info() calls __skb_vlan_pop() as the most
appropriate helper I could find which strips away a VLAN header.
That's all I need it to do, but __skb_vlan_pop() has more logic, which
will become incompatible with the future revert of commit 6d1ccff62780
("net: reset mac header in dev_start_xmit()").

Namely, it performs a sanity check on skb_mac_header(), which will stop
being set after the above revert, so it will return an error instead of
removing the VLAN tag.

ocelot_xmit_get_vlan_info() gets called in 2 circumstances:

(1) the port is under a VLAN-aware bridge and the bridge sends
    VLAN-tagged packets

(2) the port is under a VLAN-aware bridge and somebody else (an 8021q
    upper) sends VLAN-tagged packets (using a VID that isn't in the
    bridge vlan tables)

In case (1), there is actually no bug to defend against, because
br_dev_xmit() calls skb_reset_mac_header() and things continue to work.

However, in case (2), illustrated using the commands below, it can be
seen that our intervention is needed, since __skb_vlan_pop() complains:

$ ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up
$ ip link set $eth master br0 && ip link set $eth up
$ ip link add link $eth name $eth.100 type vlan id 100 && ip link set $eth.100 up
$ ip addr add 192.168.100.1/24 dev $eth.100

I could fend off the checks in __skb_vlan_pop() with some
skb_mac_header_was_set() calls, but seeing how few callers of
__skb_vlan_pop() there are from TX paths, that seems rather
unproductive.

As an alternative solution, extract the bare minimum logic to strip a
VLAN header, and move it to a new helper named vlan_remove_tag(), close
to the definition of vlan_insert_tag(). Document it appropriately and
make ocelot_xmit_get_vlan_info() call this smaller helper instead.

Seeing that it doesn't appear illegal to test skb->protocol in the TX
path, I guess it would be a good for vlan_remove_tag() to also absorb
the vlan_set_encap_proto() function call.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: update TX path comments to not mention skb_mac_header()

Once commit 6d1ccff62780 ("net: reset mac header in dev_start_xmit()")
will be reverted, it will no longer be true that skb->data points at
skb_mac_header(skb) - since the skb->mac_header will not be set - so
stop saying that, and just say that it points to the MAC header.

I've reviewed vlan_insert_tag() and it does not *actually* depend on
skb_mac_header(), so reword that to avoid the confusion.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: tag_sja1105: replace skb_mac_header() with vlan_eth_hdr()

This is a cosmetic patch which consolidates the code to use the helper
function offered by if_vlan.h.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: tag_sja1105: don't rely on skb_mac_header() in TX paths

skb_mac_header() will no longer be available in the TX path when
reverting commit 6d1ccff62780 ("net: reset mac header in
dev_start_xmit()"). As preparation for that, let's use
skb_vlan_eth_hdr() to get to the VLAN header instead, which assumes it's
located at skb->data (assumption which holds true here).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: tag_ksz: do not rely on skb_mac_header() in TX paths

skb_mac_header() will no longer be available in the TX path when
reverting commit 6d1ccff62780 ("net: reset mac header in
dev_start_xmit()"). As preparation for that, let's use skb_eth_hdr() to
get to the Ethernet header's MAC DA instead, helper which assumes this
header is located at skb->data (assumption which holds true here).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: tag_ocelot: do not rely on skb_mac_header() for VLAN xmit

skb_mac_header() will no longer be available in the TX path when
reverting commit 6d1ccff62780 ("net: reset mac header in
dev_start_xmit()"). As preparation for that, let's use
skb_vlan_eth_hdr() to get to the VLAN header instead, which assumes it's
located at skb->data (assumption which holds true here).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dpaa: avoid one skb_reset_mac_header() in dpaa_enable_tx_csum()

It appears that dpaa_enable_tx_csum() only calls skb_reset_mac_header()
to get to the VLAN header using skb_mac_header().

We can use skb_vlan_eth_hdr() to get to the VLAN header based on
skb->data directly. This avoids spending a few cycles to set
skb->mac_header.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: vlan: introduce skb_vlan_eth_hdr()

Similar to skb_eth_hdr() introduced in commit 96cc4b69581d ("macvlan: do
not assume mac_header is set in macvlan_broadcast()"), let's introduce a
skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get
to the VLAN header based on skb->data rather than based on the
skb_mac_header(skb).

We also consolidate the drivers that dereference skb->data to go through
this helper.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: vlan: don't adjust MAC header in __vlan_insert_inner_tag() unless set

This is a preparatory change for the deletion of skb_reset_mac_header(skb)
from __dev_queue_xmit(). After that deletion, skb_mac_header(skb) will
no longer be set in TX paths, from which __vlan_insert_inner_tag() can
still be called (perhaps indirectly).

If we don't make this change, then an unset MAC header (equal to ~0U)
will become set after the adjustment with VLAN_HLEN.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy: add driver for Microchip LAN867x 10BASE-T1S PHY

This patch adds support for the Microchip LAN867x 10BASE-T1S family
(LAN8670/1/2). The driver supports P2MP with PLCA.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ramón Nordin Rodriguez <ramon.nordin.rodriguez@ferroamp.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

rxrpc: Replace fake flex-array with flexible-array member

Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members instead.

Transform zero-length array into flexible-array member in struct
rxrpc_ackpacket.

Address the following warnings found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
net/rxrpc/call_event.c:149:38: warning: array subscript i is outside array bounds of ‘uint8_t[0]’ {aka ‘unsigned char[]’} [-Warray-bounds=]

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].

Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/263
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
cc: linux-hardening@vger.kernel.org
Link: https://lore.kernel.org/r/ZAZT11n4q5bBttW0@work/
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'napi_threaded_poll-enhancements'

Eric Dumazet says:

====================
net: give napi_threaded_poll() some love

There is interest to revert commit 4cd13c21b207
("softirq: Let ksoftirqd do its job") and use instead the
napi_threaded_poll() mode.

https://lore.kernel.org/netdev/140f61e2e1fcb8cf53619709046e312e343b53ca.camel@redhat.com/T/#m8a8f5b09844adba157ad0d22fc1233d97013de50

Before doing so, make sure napi_threaded_poll() benefits
from recent core stack improvements, to further reduce
softirq triggers.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: optimize napi_threaded_poll() vs RPS/RFS

We use napi_threaded_poll() in order to reduce our softirq dependency.

We can add a followup of 821eba962d95 ("net: optimize napi_schedule_rps()")
to further remove the need of firing NET_RX_SOFTIRQ whenever
RPS/RFS are used.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: make napi_threaded_poll() aware of sd->defer_list

If we call skb_defer_free_flush() from napi_threaded_poll(),
we can avoid to raise IPI from skb_attempt_defer_free()
when the list becomes too big.

This allows napi_threaded_poll() to rely less on softirqs,
and lowers latency caused by a too big list.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: move skb_defer_free_flush() up

We plan using skb_defer_free_flush() from napi_threaded_poll()
in the following patch.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: do not provide hard irq safety for sd->defer_lock

kfree_skb() can be called from hard irq handlers,
but skb_attempt_defer_free() is meant to be used
from process or BH contexts, and skb_defer_free_flush()
is meant to be called from BH contexts.

Not having to mask hard irq can save some cycles.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: add debugging checks in skb_attempt_defer_free()

Make sure skbs that are stored in softnet_data.defer_list
do not have a dst attached.

Also make sure the the skb was orphaned.

Link: https://lore.kernel.org/netdev/CANn89iJuEVe72bPmEftyEJHLzzN=QNR2yueFjTxYXCEpS5S8HQ@mail.gmail.com/T/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/next-queue

Tony Nguyen says:

====================
This series lowers the CPU usage of the ice driver when using its
provided /dev/gnss*.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: mtk_eth_soc: mediatek: fix ppe flow accounting for v1 hardware

Older chips (like MT7622) use a different bit in ib2 to enable hardware
counter support. Add macros for both and select the appropriate bit.

Fixes: 3fbe4d8c0e53 ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mlx5-updates-2023-04-20' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2023-04-20

1) Dragos Improves RX page pool, and provides some fixes to his previous
   series:
1.1) Fix releasing page_pool for striding RQ and legacy RQ nonlinear case
1.2) Hook NAPIs to page pools to gain more performance.

2) From Roi, Some cleanups to TC and eswitch modules.

3) Maher migrates vnic diagnostic counters reporting from debugfs to a
    dedicated devlink health reporter

Maher Says:
===========
net/mlx5: Expose vnic diagnostic counters using devlink

Currently, vnic diagnostic counters are exposed through the following
debugfs:

$ ls /sys/kernel/debug/mlx5/0000:08:00.0/esw/vf_0/vnic_diag/
cq_overrun
quota_exceeded_command
total_q_under_processor_handle
invalid_command
send_queue_priority_update_flow
nic_receive_steering_discard

The current design does not allow the hypervisor to view the diagnostic
counters of its VFs, in case the VFs get bound to a VM. In other words,
the counters are not exposed for representor interfaces.
Furthermore, the debugfs design is inconvenient future-wise, in case more
counters need to be reported by the driver in the future.

As these counters pertain to vNIC health, it is more appropriate to
utilize the devlink health reporter to expose them.

Thus, this patchest includes the following changes:

* Drop the current vnic diagnostic counters debugfs interface.
* Add a vnic devlink health reporter for PFs/VFs core devices, which
  when diagnosed will dump vnic diagnostic counter values that are
  queried from FW.
* Add a vnic devlink health reporter for the representor interface, which
  serves the same purpose listed in the previous point, in addition to
  allowing the hypervisor to view its VFs diagnostic counters, even when
  the VFs are bounded to external VMs.

Example of devlink health reporter usage is:
$devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
    total_error_queues: 0 send_queue_priority_update_flow: 0
    comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
    invalid_command: 0 quota_exceeded_command: 0
    nic_receive_steering_discard: 0

===========

4) SW steering fixes and improvements

Yevgeny Kliteynik Says:
=======================
These short patch series are just small fixes / improvements for
SW steering:

- Patch 1: Fix dumping of legacy modify_hdr in debug dump to
   align to what is expected by parser
- Patch 2: Have separate threshold for ICM sync per ICM type
- Patch 3: Add more info to the steering debug dump - Linux
   version and device name
- Patch 4: Keep track of number of buddies that are currently
   in use per domain per buddy type

=======================

* tag 'mlx5-updates-2023-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: Update op_mode to op_mod for port selection
  net/mlx5: E-Switch, Remove unused mlx5_esw_offloads_vport_metadata_set()
  net/mlx5: E-Switch, Remove redundant dev arg from mlx5_esw_vport_alloc()
  net/mlx5: Include linux/pci.h for pci_msix_can_alloc_dyn()
  net/mlx5e: RX, Hook NAPIs to page pools
  net/mlx5e: RX, Fix XDP_TX page release for legacy rq nonlinear case
  net/mlx5e: RX, Fix releasing page_pool pages twice for striding RQ
  net/mlx5e: Add vnic devlink health reporter to representors
  net/mlx5: Add vnic devlink health reporter to PFs/VFs
  Revert "net/mlx5: Expose vnic diagnostic counters for eswitch managed vports"
  Revert "net/mlx5: Expose steering dropped packets counter"
  net/mlx5: DR, Add memory statistics for domain object
  net/mlx5: DR, Add more info in domain dbg dump
  net/mlx5: DR, Calculate sync threshold of each pool according to its type
  net/mlx5: DR, Fix dumping of legacy modify_hdr in debug dump
====================

Link: https://lore.kernel.org/r/20230421013850.349646-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-04-21

We've added 71 non-merge commits during the last 8 day(s) which contain
a total of 116 files changed, 13397 insertions(+), 8896 deletions(-).

The main changes are:

1) Add a new BPF netfilter program type and minimal support to hook
   BPF programs to netfilter hooks such as prerouting or forward,
   from Florian Westphal.

2) Fix race between btf_put and btf_idr walk which caused a deadlock,
   from Alexei Starovoitov.

3) Second big batch to migrate test_verifier unit tests into test_progs
   for ease of readability and debugging, from Eduard Zingerman.

4) Add support for refcounted local kptrs to the verifier for allowing
   shared ownership, useful for adding a node to both the BPF list and
   rbtree, from Dave Marchevsky.

5) Migrate bpf_for(), bpf_for_each() and bpf_repeat() macros from BPF
  selftests into libbpf-provided bpf_helpers.h header and improve
  kfunc handling, from Andrii Nakryiko.

6) Support 64-bit pointers to kfuncs needed for archs like s390x,
   from Ilya Leoshkevich.

7) Support BPF progs under getsockopt with a NULL optval,
   from Stanislav Fomichev.

8) Improve verifier u32 scalar equality checking in order to enable
   LLVM transformations which earlier had to be disabled specifically
   for BPF backend, from Yonghong Song.

9) Extend bpftool's struct_ops object loading to support links,
   from Kui-Feng Lee.

10) Add xsk selftest follow-up fixes for hugepage allocated umem,
    from Magnus Karlsson.

11) Support BPF redirects from tc BPF to ifb devices,
    from Daniel Borkmann.

12) Add BPF support for integer type when accessing variable length
    arrays, from Feng Zhou.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (71 commits)
  selftests/bpf: verifier/value_ptr_arith converted to inline assembly
  selftests/bpf: verifier/value_illegal_alu converted to inline assembly
  selftests/bpf: verifier/unpriv converted to inline assembly
  selftests/bpf: verifier/subreg converted to inline assembly
  selftests/bpf: verifier/spin_lock converted to inline assembly
  selftests/bpf: verifier/sock converted to inline assembly
  selftests/bpf: verifier/search_pruning converted to inline assembly
  selftests/bpf: verifier/runtime_jit converted to inline assembly
  selftests/bpf: verifier/regalloc converted to inline assembly
  selftests/bpf: verifier/ref_tracking converted to inline assembly
  selftests/bpf: verifier/map_ptr_mixing converted to inline assembly
  selftests/bpf: verifier/map_in_map converted to inline assembly
  selftests/bpf: verifier/lwt converted to inline assembly
  selftests/bpf: verifier/loops1 converted to inline assembly
  selftests/bpf: verifier/jeq_infer_not_null converted to inline assembly
  selftests/bpf: verifier/direct_packet_access converted to inline assembly
  selftests/bpf: verifier/d_path converted to inline assembly
  selftests/bpf: verifier/ctx converted to inline assembly
  selftests/bpf: verifier/btf_ctx_access converted to inline assembly
  selftests/bpf: verifier/bpf_get_stack converted to inline assembly
  ...
====================

Link: https://lore.kernel.org/r/20230421211035.9111-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dst: fix missing initialization of rt_uncached

xfrm_alloc_dst() followed by xfrm4_dst_destroy(), without a
xfrm4_fill_dst() call in between, causes the following BUG:

BUG: spinlock bad magic on CPU#0, fbxhostapd/732
  lock: 0x890b7668, .magic: 890b7668, .owner: <none>/-1, .owner_cpu: 0
CPU: 0 PID: 732 Comm: fbxhostapd Not tainted 6.3.0-rc6-next-20230414-00613-ge8de66369925-dirty #9
Hardware name: Marvell Kirkwood (Flattened Device Tree)
  unwind_backtrace from show_stack+0x10/0x14
  show_stack from dump_stack_lvl+0x28/0x30
  dump_stack_lvl from do_raw_spin_lock+0x20/0x80
  do_raw_spin_lock from rt_del_uncached_list+0x30/0x64
  rt_del_uncached_list from xfrm4_dst_destroy+0x3c/0xbc
  xfrm4_dst_destroy from dst_destroy+0x5c/0xb0
  dst_destroy from rcu_process_callbacks+0xc4/0xec
  rcu_process_callbacks from __do_softirq+0xb4/0x22c
  __do_softirq from call_with_stack+0x1c/0x24
  call_with_stack from do_softirq+0x60/0x6c
  do_softirq from __local_bh_enable_ip+0xa0/0xcc

Patch "net: dst: Prevent false sharing vs. dst_entry:: __refcnt" moved
rt_uncached and rt_uncached_list fields from rtable struct to dst
struct, so they are more zeroed by memset_after(xdst, 0, u.dst) in
xfrm_alloc_dst().

Note that rt_uncached (list_head) was never properly initialized at
alloc time, but xfrm[46]_dst_destroy() is written in such a way that
it was not an issue thanks to the memset:

if (xdst->u.rt.dst.rt_uncached_list)
rt_del_uncached_list(&xdst->u.rt);

The route code does it the other way around: rt_uncached_list is
assumed to be valid IIF rt_uncached list_head is not empty:

void rt_del_uncached_list(struct rtable *rt)
{
        if (!list_empty(&rt->dst.rt_uncached)) {
                struct uncached_list *ul = rt->dst.rt_uncached_list;

                spin_lock_bh(&ul->lock);
                list_del_init(&rt->dst.rt_uncached);
                spin_unlock_bh(&ul->lock);
        }
}

This patch adds mandatory rt_uncached list_head initialization in
generic dst_init(), and adapt xfrm[46]_dst_destroy logic to match the
rest of the code.

Fixes: d288a162dd1c ("net: dst: Prevent false sharing vs. dst_entry:: __refcnt")
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202304162125.18b7bcdd-oliver.sang@intel.com
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
CC: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Link: https://lore.kernel.org/r/20230420182508.2417582-1-mbizon@freebox.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: qca8k: fix LEDS_CLASS dependency

With LEDS_CLASS=m, a built-in qca8k driver fails to link:

arm-linux-gnueabi-ld: drivers/net/dsa/qca/qca8k-leds.o: in function `qca8k_setup_led_ctrl':
qca8k-leds.c:(.text+0x1ea): undefined reference to `devm_led_classdev_register_ext'

Change the dependency to avoid the broken configuration.

Fixes: 1e264f9d2918 ("net: dsa: qca8k: add LEDs basic support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230420213639.2243388-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/handshake: Fix section mismatch in handshake_exit

If CONFIG_NET_NS=n (e.g. m68k/defconfig):

WARNING: modpost: vmlinux.o: section mismatch in reference: handshake_exit (section: .exit.text) -> handshake_genl_net_ops (section: .init.data)
ERROR: modpost: Section mismatches detected.

Fix this by dropping the __net_initdata tag from handshake_genl_net_ops.

Fixes: 3b3009ea8abb713b ("net/handshake: Create a NETLINK service for handling handshake requests")
Reported-by: noreply@ellerman.id.au
Closes: http://kisskb.ellerman.id.au/kisskb/buildresult/14912987
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20230420173723.3773434-1-geert@linux-m68k.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: add basic driver for NXP CBTX PHY

The CBTX PHY is a Fast Ethernet PHY integrated into the SJA1110 A/B/C
automotive Ethernet switches.

It was hoped it would work with the Generic PHY driver, but alas, it
doesn't. The most important reason why is that the PHY is powered down
by default, and it needs a vendor register to power it on.

It has a linear memory map that is accessed over SPI by the SJA1110
switch driver, which exposes a fake MDIO controller. It has the
following (and only the following) standard clause 22 registers:

0x0: MII_BMCR
0x1: MII_BMSR
0x2: MII_PHYSID1
0x3: MII_PHYSID2
0x4: MII_ADVERTISE
0x5: MII_LPA
0x6: MII_EXPANSION
0x7: the missing MII_NPAGE for Next Page Transmit Register

Every other register is vendor-defined.

The register map expands the standard clause 22 5-bit address space of
0x20 registers, however the driver does not need to access the extra
registers for now (and hopefully never). If it ever needs to do that, it
is possible to implement a fake (software) page switching mechanism
between the PHY driver and the SJA1110 MDIO controller driver.

Also, Auto-MDIX is turned off by default in hardware, the driver turns
it on by default and reports the current status. I've tested this with a
VSC8514 link partner and a crossover cable, by forcing the mode on the
link partner, and seeing that the CBTX PHY always sees the reverse of
the mode forced on the VSC8514 (and that traffic works). The link
doesn't come up (as expected) if MDI modes are forced on both ends in
the same way (with the cross-over cable, that is).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230418190141.1040562-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/bpf: verifier/value_ptr_arith converted to inline assembly

Test verifier/value_ptr_arith automatically converted to use inline assembly.

Test cases "sanitation: alu with different scalars 2" and
"sanitation: alu with different scalars 3" are updated to
avoid -ENOENT as return value, as __retval() annotation
only supports numeric literals.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-25-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/value_illegal_alu converted to inline assembly

Test verifier/value_illegal_alu automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-24-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/unpriv converted to inline assembly

Test verifier/unpriv semi-automatically converted to use inline assembly.

The verifier/unpriv.c had to be split in two parts:
- the bulk of the tests is in the progs/verifier_unpriv.c;
- the single test that needs `struct bpf_perf_event_data`
  definition is in the progs/verifier_unpriv_perf.c.

The tests above can't be in a single file because:
- first requires inclusion of the filter.h header
  (to get access to BPF_ST_MEM macro, inline assembler does
   not support this isntruction);
- the second requires vmlinux.h, which contains definitions
  conflicting with filter.h.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-23-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/subreg converted to inline assembly

Test verifier/subreg automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-22-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/spin_lock converted to inline assembly

Test verifier/spin_lock automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-21-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/sock converted to inline assembly

Test verifier/sock automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-20-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/search_pruning converted to inline assembly

Test verifier/search_pruning automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-19-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/runtime_jit converted to inline assembly

Test verifier/runtime_jit automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-18-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/regalloc converted to inline assembly

Test verifier/regalloc automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-17-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/ref_tracking converted to inline assembly

Test verifier/ref_tracking automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-16-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/map_ptr_mixing converted to inline assembly

Test verifier/map_ptr_mixing automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-13-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/map_in_map converted to inline assembly

Test verifier/map_in_map automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-12-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/lwt converted to inline assembly

Test verifier/lwt automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-11-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/loops1 converted to inline assembly

Test verifier/loops1 automatically converted to use inline assembly.

There are a few modifications for the converted tests.
"tracepoint" programs do not support test execution, change program
type to "xdp" (which supports test execution) for the following tests
that have __retval tags:
- bounded loop, count to 4
- bonded loop containing forward jump

Also, remove the __retval tag for test:
- bounded loop, count from positive unknown to 4

As it's return value is a random number.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/jeq_infer_not_null converted to inline assembly

Test verifier/jeq_infer_not_null automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/direct_packet_access converted to inline assembly

Test verifier/direct_packet_access automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/d_path converted to inline assembly

Test verifier/d_path automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/ctx converted to inline assembly

Test verifier/ctx automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/btf_ctx_access converted to inline assembly

Test verifier/btf_ctx_access automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/bpf_get_stack converted to inline assembly

Test verifier/bpf_get_stack automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: verifier/bounds converted to inline assembly

Test verifier/bounds automatically converted to use inline assembly.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: Add notion of auxiliary programs for test_loader

In order to express test cases that use bpf_tail_call() intrinsic it
is necessary to have several programs to be loaded at a time.
This commit adds __auxiliary annotation to the set of annotations
supported by test_loader.c. Programs marked as auxiliary are always
loaded but are not treated as a separate test.

For example:

    void dummy_prog1(void);

    struct {
            __uint(type, BPF_MAP_TYPE_PROG_ARRAY);
            __uint(max_entries, 4);
            __uint(key_size, sizeof(int));
            __array(values, void (void));
    } prog_map SEC(".maps") = {
            .values = {
                    [0] = (void *) &dummy_prog1,
            },
    };

    SEC("tc")
    __auxiliary
    __naked void dummy_prog1(void) {
            asm volatile ("r0 = 42; exit;");
    }

    SEC("tc")
    __description("reference tracking: check reference or tail call")
    __success __retval(0)
    __naked void check_reference_or_tail_call(void)
    {
            asm volatile (
            "r2 = %[prog_map] ll;"
            "r3 = 0;"
            "call %[bpf_tail_call];"
            "r0 = 0;"
            "exit;"
            :: __imm(bpf_tail_call),
            :  __clobber_all);
    }

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge branch 'bpf: add netfilter program type'

Florian Westphal says:

====================
Changes since last version:
- rework test case in last patch wrt. ctx->skb dereference etc (Alexei)
- pacify bpf ci tests, netfilter program type missed string translation
  in libbpf helper.

This still uses runtime btf walk rather than extending
the btf trace array as Alexei suggested, I would do this later (or someone else can).

v1 cover letter:

Add minimal support to hook bpf programs to netfilter hooks, e.g.
PREROUTING or FORWARD.

For this the most relevant parts for registering a netfilter
hook via the in-kernel api are exposed to userspace via bpf_link.

The new program type is 'tracing style', i.e. there is no context
access rewrite done by verifier, the function argument (struct bpf_nf_ctx)
isn't stable.
There is no support for direct packet access, dynptr api should be used
instead.

With this its possible to build a small test program such as:

#include "vmlinux.h"
extern int bpf_dynptr_from_skb(struct __sk_buff *skb, __u64 flags,
                               struct bpf_dynptr *ptr__uninit) __ksym;
extern void *bpf_dynptr_slice(const struct bpf_dynptr *ptr, uint32_t offset,
                                   void *buffer, uint32_t buffer__sz) __ksym;
SEC("netfilter")
int nf_test(struct bpf_nf_ctx *ctx)
{
struct nf_hook_state *state = ctx->state;
struct sk_buff *skb = ctx->skb;
const struct iphdr *iph, _iph;
const struct tcphdr *th, _th;
struct bpf_dynptr ptr;

if (bpf_dynptr_from_skb(skb, 0, &ptr))
return NF_DROP;

iph = bpf_dynptr_slice(&ptr, 0, &_iph, sizeof(_iph));
if (!iph)
return NF_DROP;

th = bpf_dynptr_slice(&ptr, iph->ihl << 2, &_th, sizeof(_th));
if (!th)
return NF_DROP;

bpf_printk("accept %x:%d->%x:%d, hook %d ifin %d\n",
   iph->saddr, bpf_ntohs(th->source), iph->daddr,
   bpf_ntohs(th->dest), state->hook, state->in->ifindex);
        return NF_ACCEPT;
}

Then, tail /sys/kernel/tracing/trace_pipe.

Changes since v3:
- uapi: remove 'reserved' struct member, s/prio/priority (Alexei)
- add ctx access test cases (Alexei, see last patch)
- some arm32 can only handle cmpxchg on u32 (build bot)
- Fix kdoc annotations (Simon Horman)
- bpftool: prefer p_err, not fprintf (Quentin)
- add test cases in separate patch

Changes since v2:
1. don't WARN when user calls 'bpftool loink detach' twice
   restrict attachment to ip+ip6 families, lets relax this
   later in case arp/bridge/netdev are needed too.
2. show netfilter links in 'bpftool net' output as well.

Changes since v1:
1. Don't fail to link when CONFIG_NETFILTER=n (build bot)
2. Use test_progs instead of test_verifier (Alexei)

Changes since last RFC version:
1. extend 'bpftool link show' to print prio/hooknum etc
2. extend 'nft list hooks' so it can print the bpf program id
3. Add an extra patch to artificially restrict bpf progs with
   same priority.  Its fine from a technical pov but it will
   cause ordering issues (most recent one comes first).
   Can be removed later.
4. Add test_run support for netfilter prog type and a small
   extension to verifier tests to make sure we can't return
   verdicts like NF_STOLEN.
5. Alter the netfilter part of the bpf_link uapi struct:
   - add flags/reserved members.
  Not used here except returning errors when they are nonzero.
  Plan is to allow the bpf_link users to enable netfilter
  defrag or conntrack engine by setting feature flags at
  link create time in the future.
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: add missing netfilter return value and ctx access tests

Extend prog_tests with two test cases:

# ./test_progs --allow=verifier_netfilter_retcode
#278/1   verifier_netfilter_retcode/bpf_exit with invalid return code. test1:OK
#278/2   verifier_netfilter_retcode/bpf_exit with valid return code. test2:OK
#278/3   verifier_netfilter_retcode/bpf_exit with valid return code. test3:OK
#278/4   verifier_netfilter_retcode/bpf_exit with invalid return code. test4:OK
#278     verifier_netfilter_retcode:OK

This checks that only accept and drop (0,1) are permitted.

NF_QUEUE could be implemented later if we can guarantee that attachment
of such programs can be rejected if they get attached to a pf/hook that
doesn't support async reinjection.

NF_STOLEN could be implemented via trusted helpers that can guarantee
that the skb will eventually be free'd.

v4: test case for bpf_nf_ctx access checks, requested by Alexei Starovoitov.
v5: also check ctx->{state,skb} can be dereferenced (Alexei).

# ./test_progs --allow=verifier_netfilter_ctx
#281/1   verifier_netfilter_ctx/netfilter invalid context access, size too short:OK
#281/2   verifier_netfilter_ctx/netfilter invalid context access, size too short:OK
#281/3   verifier_netfilter_ctx/netfilter invalid context access, past end of ctx:OK
#281/4   verifier_netfilter_ctx/netfilter invalid context, write:OK
#281/5   verifier_netfilter_ctx/netfilter valid context read and invalid write:OK
#281/6   verifier_netfilter_ctx/netfilter test prog with skb and state read access:OK
#281/7   verifier_netfilter_ctx/netfilter test prog with skb and state read access @unpriv:OK
#281     verifier_netfilter_ctx:OK
Summary: 1/7 PASSED, 0 SKIPPED, 0 FAILED

This checks:
1/2: partial reads of ctx->{skb,state} are rejected
3. read access past sizeof(ctx) is rejected
4. write to ctx content, e.g. 'ctx->skb = NULL;' is rejected
5. ctx->state content cannot be altered
6. ctx->state and ctx->skb can be dereferenced
7. ... same program fails for unpriv (CAP_NET_ADMIN needed).

Link: https://lore.kernel.org/bpf/20230419021152.sjq4gttphzzy6b5f@dhcp-172-26-102-232.dhcp.thefacebook.com/
Link: https://lore.kernel.org/bpf/20230420201655.77kkgi3dh7fesoll@MacBook-Pro-6.local/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-8-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: add test_run support for netfilter program type

add glue code so a bpf program can be run using userspace-provided
netfilter state and packet/skb.

Default is to use ipv4:output hook point, but this can be overridden by
userspace. Userspace provided netfilter state is restricted, only hook and
protocol families can be overridden and only to ipv4/ipv6.

Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-7-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

tools: bpftool: print netfilter link info

Dump protocol family, hook and priority value:
$ bpftool link
2: netfilter  prog 14
        ip input prio -128
        pids install(3264)
5: netfilter  prog 14
        ip6 forward prio 21
        pids a.out(3387)
9: netfilter  prog 14
        ip prerouting prio 123
        pids a.out(5700)
10: netfilter  prog 14
        ip input prio 21
        pids test2(5701)

v2: Quentin Monnet suggested to also add 'bpftool net' support:

$ bpftool net
xdp:

tc:

flow_dissector:

netfilter:

        ip prerouting prio 21 prog_id 14
        ip input prio -128 prog_id 14
        ip input prio 21 prog_id 14
        ip forward prio 21 prog_id 14
        ip output prio 21 prog_id 14
        ip postrouting prio 21 prog_id 14

'bpftool net' only dumps netfilter link type, links are sorted by protocol
family, hook and priority.

v5: fix bpf ci failure: libbpf needs small update to prog_type_name[]
    and probe_prog_load helper.
v4: don't fail with -EOPNOTSUPP in libbpf probe_prog_load, update
    prog_type_name[] with "netfilter" entry (bpf ci)
v3: fix bpf.h copy, 'reserved' member was removed (Alexei)
    use p_err, not fprintf (Quentin)

Suggested-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/eeeaac99-9053-90c2-aa33-cc1ecb1ae9ca@isovalent.com/
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-6-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

netfilter: disallow bpf hook attachment at same priority

This is just to avoid ordering issues between multiple bpf programs,
this could be removed later in case it turns out to be too cautious.

bpf prog could still be shared with non-bpf hook, otherwise we'd have to
make conntrack hook registration fail just because a bpf program has
same priority.

Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-5-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

netfilter: nfnetlink hook: dump bpf prog id

This allows userspace ("nft list hooks") to show which bpf program
is attached to which hook.

Without this, user only knows bpf prog is attached at prio
x, y, z at INPUT and FORWARD, but can't tell which program is where.

v4: kdoc fixups (Simon Horman)

Link: https://lore.kernel.org/bpf/ZEELzpNCnYJuZyod@corigine.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-4-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: minimal support for programs hooked into netfilter framework

This adds minimal support for BPF_PROG_TYPE_NETFILTER bpf programs
that will be invoked via the NF_HOOK() points in the ip stack.

Invocation incurs an indirect call. This is not a necessity: Its
possible to add 'DEFINE_BPF_DISPATCHER(nf_progs)' and handle the
program invocation with the same method already done for xdp progs.

This isn't done here to keep the size of this chunk down.

Verifier restricts verdicts to either DROP or ACCEPT.

Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-3-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: add bpf_link support for BPF_NETFILTER programs

Add bpf_link support skeleton.  To keep this reviewable, no bpf program
can be invoked yet, if a program is attached only a c-stub is called and
not the actual bpf program.

Defaults to 'y' if both netfilter and bpf syscall are enabled in kconfig.

Uapi example usage:
union bpf_attr attr = { };

attr.link_create.prog_fd = progfd;
attr.link_create.attach_type = 0; /* unused */
attr.link_create.netfilter.pf = PF_INET;
attr.link_create.netfilter.hooknum = NF_INET_LOCAL_IN;
attr.link_create.netfilter.priority = -128;

err = bpf(BPF_LINK_CREATE, &attr, sizeof(attr));

... this would attach progfd to ipv4:input hook.

Such hook gets removed automatically if the calling program exits.

BPF_NETFILTER program invocation is added in followup change.

NF_HOOK_OP_BPF enum will eventually be read from nfnetlink_hook, it
allows to tell userspace which program is attached at the given hook
when user runs 'nft hook list' command rather than just the priority
and not-very-helpful 'this hook runs a bpf prog but I can't tell which
one'.

Will also be used to disallow registration of two bpf programs with
same priority in a followup patch.

v4: arm32 cmpxchg only supports 32bit operand
    s/prio/priority/
v3: restrict prog attachment to ip/ip6 for now, lets lift restrictions if
    more use cases pop up (arptables, ebtables, netdev ingress/egress etc).

Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-2-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpftool: Update doc to explain struct_ops register subcommand.

The "struct_ops register" subcommand now allows for an optional *LINK_DIR*
to be included. This specifies the directory path where bpftool will pin
struct_ops links with the same name as their corresponding map names.

Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230420002822.345222-2-kuifeng@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpftool: Register struct_ops with a link.

You can include an optional path after specifying the object name for the
'struct_ops register' subcommand.

Since the commit 226bc6ae6405 ("Merge branch 'Transit between BPF TCP
congestion controls.'") has been accepted, it is now possible to create a
link for a struct_ops. This can be done by defining a struct_ops in
SEC(".struct_ops.link") to make libbpf returns a real link. If we don't pin
the links before leaving bpftool, they will disappear. To instruct bpftool
to pin the links in a directory with the names of the maps, we need to
provide the path of that directory.

Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230420002822.345222-1-kuifeng@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: Verify optval=NULL case

Make sure we get optlen exported instead of getting EFAULT.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230418225343.553806-3-sdf@google.com

bpf: Don't EFAULT for getsockopt with optval=NULL

Some socket options do getsockopt with optval=NULL to estimate the size
of the final buffer (which is returned via optlen). This breaks BPF
getsockopt assumptions about permitted optval buffer size. Let's enforce
these assumptions only when non-NULL optval is provided.

Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks")
Reported-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/ZD7Js4fj5YyI2oLd@google.com/T/#mb68daf700f87a9244a15d01d00c3f0e5b08f49f7
Link: https://lore.kernel.org/bpf/20230418225343.553806-2-sdf@google.com

Merge tag 'wireless-next-2023-04-21' of git://git./linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.4

Most likely the last -next pull request for v6.4. We have changes all
over. rtw88 now supports SDIO bus and iwlwifi continues to work on
Wi-Fi 7 support. Not much stack changes this time.

Major changes:

cfg80211/mac80211
- fix some Fine Time Measurement (FTM) frames not being bufferable
- flush frames before key removal to avoid potential unencrypted
   transmission depending on the hardware design

iwlwifi
- preparation for Wi-Fi 7 EHT and multi-link support

rtw88
- SDIO bus support
- RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support

rtw89
- framework firmware backwards compatibility

brcmfmac
- Cypress 43439 SDIO support

mt76
- mt7921 P2P support
- mt7996 mesh A-MSDU support
- mt7996 EHT support
- mt7996 coredump support

wcn36xx
- support for pronto v3 hardware

ath11k
- PCIe DeviceTree bindings
- WCN6750: enable SAR support

ath10k
- convert DeviceTree bindings to YAML

* tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits)
  wifi: rtw88: Update spelling in main.h
  wifi: airo: remove ISA_DMA_API dependency
  wifi: rtl8xxxu: Simplify setting the initial gain
  wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear}
  wifi: rtl8xxxu: Don't print the vendor/product/serial
  wifi: rtw88: Fix memory leak in rtw88_usb
  wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant
  wifi: rtw88: set pkg_type correctly for specific rtw8821c variants
  wifi: rtw88: rtw8821c: Fix rfe_option field width
  wifi: rtw88: usb: fix priority queue to endpoint mapping
  wifi: rtw88: 8822c: add iface combination
  wifi: rtw88: handle station mode concurrent scan with AP mode
  wifi: rtw88: prevent scan abort with other VIFs
  wifi: rtw88: refine reserved page flow for AP mode
  wifi: rtw88: disallow PS during AP mode
  wifi: rtw88: 8822c: extend reserved page number
  wifi: rtw88: add port switch for AP mode
  wifi: rtw88: add bitmap for dynamic port settings
  wifi: rtw89: mac: use regular int as return type of DLE buffer request
  wifi: mac80211: remove return value check of debugfs_create_dir()
  ...
====================

Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/xsk: Put MAP_HUGE_2MB in correct argument

Put the flag MAP_HUGE_2MB in the correct flags argument instead of the
wrong offset argument.

Fixes: 2ddade322925 ("selftests/xsk: Fix munmap for hugepage allocated umem")
Reported-by: Kal Cutter Conley <kal.conley@dectris.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230421062208.3772-1-magnus.karlsson@gmail.com

bpf: Fix bpf_refcount_acquire's refcount_t address calculation

When calculating the address of the refcount_t struct within a local
kptr, bpf_refcount_acquire_impl should add refcount_off bytes to the
address of the local kptr. Due to some missing parens, the function is
incorrectly adding sizeof(refcount_t) * refcount_off bytes. This patch
fixes the calculation.

Due to the incorrect calculation, bpf_refcount_acquire_impl was trying
to refcount_inc some memory well past the end of local kptrs, resulting
in kasan and refcount complaints, as reported in [0]. In that thread,
Florian and Eduard discovered that bpf selftests written in the new
style - with __success and an expected __retval, specifically - were
not actually being run. As a result, selftests added in bpf_refcount
series weren't really exercising this behavior, and thus didn't unearth
the bug.

With this fixed behavior it's safe to revert commit 7c4b96c00043
("selftests/bpf: disable program test run for progs/refcounted_kptr.c"),
this patch does so.

[0] https://lore.kernel.org/bpf/ZEEp+j22imoN6rn9@strlen.de/

Fixes: 7c50b1cb76ac ("bpf: Add bpf_refcount_acquire kfunc")
Reported-by: Florian Westphal <fw@strlen.de>
Reported-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20230421074431.3548349-1-davemarchevsky@fb.com

bpf: Fix race between btf_put and btf_idr walk.

Florian and Eduard reported hard dead lock:
[   58.433327]  _raw_spin_lock_irqsave+0x40/0x50
[   58.433334]  btf_put+0x43/0x90
[   58.433338]  bpf_find_btf_id+0x157/0x240
[   58.433353]  btf_parse_fields+0x921/0x11c0

This happens since btf->refcount can be 1 at the time of btf_put() and
btf_put() will call btf_free_id() which will try to grab btf_idr_lock
and will dead lock.
Avoid the issue by doing btf_put() without locking.

Fixes: 3d78417b60fb ("bpf: Add bpf_btf_find_by_name_kind() helper.")
Fixes: 1e89106da253 ("bpf: Add bpf_core_add_cands() and wire it into bpf_core_apply_relo_insn().")
Reported-by: Florian Westphal <fw@strlen.de>
Reported-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20230421014901.70908-1-alexei.starovoitov@gmail.com

net/packet: support mergeable feature of virtio

Packet sockets, like tap, can be used as the backend for kernel vhost.
In packet sockets, virtio net header size is currently hardcoded to be
the size of struct virtio_net_hdr, which is 10 bytes; however, it is not
always the case: some virtio features, such as mrg_rxbuf, need virtio
net header to be 12-byte long.

Mergeable buffers, as a virtio feature, is worthy of supporting: packets
that are larger than one-mbuf size will be dropped in vhost worker's
handle_rx if mrg_rxbuf feature is not used, but large packets
cannot be avoided and increasing mbuf's size is not economical.

With this virtio feature enabled by virtio-user, packet sockets with
hardcoded 10-byte virtio net header will parse mac head incorrectly in
packet_snd by taking the last two bytes of virtio net header as part of
mac header.
This incorrect mac header parsing will cause packet to be dropped due to
invalid ether head checking in later under-layer device packet receiving.

By adding extra field vnet_hdr_sz with utilizing holes in struct
packet_sock to record currently used virtio net header size and supporting
extra sockopt PACKET_VNET_HDR_SZ to set specified vnet_hdr_sz, packet
sockets can know the exact length of virtio net header that virtio user
gives.
In packet_snd, tpacket_snd and packet_recvmsg, instead of using
hardcoded virtio net header size, it can get the exact vnet_hdr_sz from
corresponding packet_sock, and parse mac header correctly based on this
information to avoid the packets being mistakenly dropped.

Signed-off-by: Jianfeng Tan <henry.tjf@antgroup.com>
Co-developed-by: Anqi Shen <amy.saq@antgroup.com>
Signed-off-by: Anqi Shen <amy.saq@antgroup.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mlx5-ipsec-fixes'

Leon Romanovsky says:

====================
Fixes to mlx5 IPsec implementation

This small patchset includes various fixes and one refactoring patch
which I collected for the features sent in this cycle, with one exception -
first patch.

First patch fixes code which was introduced in previous cycle, however I
was able to trigger FW error only in custom debug code, so don't see a
need to send it to net-rc.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5e: Refactor duplicated code in mlx5e_ipsec_init_macs

ARP discovery code has same logic for RX and TX flows, but with
different source and destination fields. Instead of duplicating
same code in mlx5e_ipsec_init_macs, let's refactor.

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5e: Properly release work data structure

There are some flows in which work structure is not allocated at all
and it is needed to be checked prior release of data structure.

general protection fault, probably for non-canonical address 0xdffffc000000000a: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057]
CPU: 6 PID: 3486 Comm: kworker/6:0 Not tainted 6.3.0-rc5_for_upstream_debug_2023_04_06_11_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: events xfrm_state_gc_task
RIP: 0010:mlx5e_xfrm_free_state+0x177/0x260 [mlx5_core]
Code: c1 ea 03 80 3c 02 00 0f 85 f5 00 00 00 4c 8b a5 08 01 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 50 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 b7 00 00 00 49 8b 7c 24 50 e8 85 7c 09 e0 4c 89
RSP: 0018:ffff888137a8fc50 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff888180398000 RCX: 0000000000000000
RDX: 000000000000000a RSI: ffffffffa1878227 RDI: 0000000000000050
RBP: ffff88812a0c8000 R08: ffff888137a8fb60 R09: 0000000000000000
R10: fffffbfff09aba0c R11: 0000000000000001 R12: 0000000000000000
R13: ffff88812a0c8108 R14: ffffffff84c63480 R15: ffff8881acb63118
FS:  0000000000000000(0000) GS:ffff88881eb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f667e8bc000 CR3: 0000000004693006 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:

  ___xfrm_state_destroy+0x3c8/0x5e0
  xfrm_state_gc_task+0xf6/0x140
  ? ___xfrm_state_destroy+0x5e0/0x5e0
  process_one_work+0x7c2/0x1340
  ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0
  ? pwq_dec_nr_in_flight+0x230/0x230
  ? spin_bug+0x1d0/0x1d0
  worker_thread+0x59d/0xec0
  ? __kthread_parkme+0xd9/0x1d0
  ? process_one_work+0x1340/0x1340
  kthread+0x28f/0x330
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x1f/0x30

Modules linked in: sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm ib_uverbs ib_core vfio_pci vfio_pci_core vfio_iommu_type1 vfio cuse overlay zram zsmalloc fuse [last unloaded: mlx5_core]
---[ end trace 0000000000000000 ]---

Fixes: 4562116f8a56 ("net/mlx5e: Generalize IPsec work structs")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5e: Compare all fields in IPv6 address

Fix size argument in memcmp to compare whole IPv6 address.

Fixes: b3beba1fb404 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes")
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5e: Don't overwrite extack message returned from IPsec SA validator

Addition of new err_xfrm label caused to error messages be overwritten.
Fix it by using proper NL_SET_ERR_MSG_WEAK_MOD macro together with change
in a default message.

Fixes: aa8bd0c9518c ("net/mlx5e: Support IPsec acquire default SA")
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5e: Fix FW error while setting IPsec policy block action

When trying to set IPsec policy block action the following error is
generated:

mlx5_cmd_out_err:803:(pid 3426): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed,
status bad parameter(0x3), syndrome (0x8708c3), err(-22)

This error means that drop action is not allowed when modify action is
set, so update the code to skip modify header for XFRM_POLICY_BLOCK action.

Fixes: 6721239672fe ("net/mlx5e: Skip IPsec encryption for TX path without matching policy")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac:fix system hang when setting up tag_8021q VLAN for DSA ports

The system hang because of dsa_tag_8021q_port_setup()->
stmmac_vlan_rx_add_vid().

I found in stmmac_drv_probe() that cailing pm_runtime_put()
disabled the clock.

First, when the kernel is compiled with CONFIG_PM=y,The stmmac's
resume/suspend is active.

Secondly,stmmac as DSA master,the dsa_tag_8021q_port_setup() function
will callback stmmac_vlan_rx_add_vid when DSA dirver starts. However,
The system is hanged for the stmmac_vlan_rx_add_vid() accesses its
registers after stmmac's clock is closed.

I would suggest adding the pm_runtime_resume_and_get() to the
stmmac_vlan_rx_add_vid().This guarantees that resuming clock output
while in use.

Fixes: b3dcb3127786 ("net: stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Yan Wang <rk.code@outlook.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'pds_core'

Shannon Nelson says:

====================
pds_core driver

Summary:
--------
This patchset implements a new driver for use with the AMD/Pensando
Distributed Services Card (DSC), intended to provide core configuration
services through the auxiliary_bus and through a couple of EXPORTed
functions for use initially in VFio and vDPA feature specific drivers.

To keep this patchset to a manageable size, the pds_vdpa and pds_vfio
drivers have been split out into their own patchsets to be reviewed
separately.

Detail:
-------
AMD/Pensando is making available a new set of devices for supporting vDPA,
VFio, and potentially other features in the Distributed Services Card
(DSC).  These features are implemented through a PF that serves as a Core
device for controlling and configuring its VF devices.  These VF devices
have separate drivers that use the auxiliary_bus to work through the Core
device as the control path.

Currently, the DSC supports standard ethernet operations using the
ionic driver.  This is not replaced by the Core-based devices - these
new devices are in addition to the existing Ethernet device.  Typical DSC
configurations will include both PDS devices and Ionic Eth devices.
However, there is a potential future path for ethernet services to come
through this device as well.

The Core device is a new PCI PF/VF device managed by a new driver
'pds_core'.  The PF device has access to an admin queue for configuring
the services used by the VFs, and sets up auxiliary_bus devices for each
vDPA VF for communicating with the drivers for the vDPA devices.  The VFs
may be for VFio or vDPA, and other services in the future; these VF types
are selected as part of the DSC internal FW configurations, which is out
of the scope of this patchset.

When the vDPA support set is enabled in the core PF through its devlink
param, auxiliary_bus devices are created for each VF that supports the
feature.  The vDPA driver then connects to and uses this auxiliary_device
to do control path configuration through the PF device.  This can then be
used with the vdpa kernel module to provide devices for virtio_vdpa kernel
module for host interfaces, or vhost_vdpa kernel module for interfaces
exported into your favorite VM.

A cheap ASCII diagram of a vDPA instance looks something like this:

                                ,----------.
                                |   vdpa   |
                                '----------'
                                  |     ||
                                 ctl   data
                                  |     ||
                          .----------.  ||
                          | pds_vdpa |  ||
                          '----------'  ||
                               |        ||
                       pds_core.vDPA.1  ||
                               |        ||
                    .---------------.   ||
                    |   pds_core    |   ||
                    '---------------'   ||
                        ||         ||   ||
                      09:00.0      09:00.1
        == PCI ============================================
                        ||            ||
                   .----------.   .----------.
            ,------|    PF    |---|    VF    |-------,
            |      '----------'   '----------'       |
            |                  DSC                   |
            |                                        |
            ------------------------------------------

Changes:
  v11:
- change strncpy to strscpy
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304181137.WaZTYyAa-lkp@intel.com/
  v10:
Link: https://lore.kernel.org/netdev/20230418003228.28234-1-shannon.nelson@amd.com/
- remove CONFIG_DEBUG_FS guard static inline stuff
- remove unnecessary 0 and null initializations
- verify in driver load that PDS_CORE_DRV_NAME matches KBUILD_MODNAME
- remove debugfs irqs_show(), redundant with /proc
- return -ENOMEM if intr_info = kcalloc() fails
- move the status code enum into pds_core_if.h as part of API definition
- fix up one place in pdsc_devcmd_wait() we're using the status codes where we could use the errno
- remove redundant calls to flush_workqueue()
- grab config_lock before testing state bits in pdsc_fw_reporter_diagnose()
- change pdsc_color_match() to return bool
- remove useless VIF setup loop and just setup vDPA services for now
- remove pf pointer from struct padev and have clients use pci_physfn()
- drop use of "vf" in auxdev.c function names, make more generic
- remove last of client ops struct and simply export the functions
- drop drivers@pensando.io from MAINTAINERS and add new include dir
- include dynamic_debug.h in adminq.c to protect dynamic_hex_dump()
- fixed fw_slot type from u8 to int for handling error returns
- fixed comment spelling
- changed void arg in pdsc_adminq_post() to struct pdsc *

  v9:
Link: https://lore.kernel.org/netdev/20230406234143.11318-1-shannon.nelson@amd.com/
- change pdsc field name id to uid to clarify the unique id used for aux device
- remove unnecessary pf->state and other checks in aux device creation
- hardcode fw slotnames for devlink info, don't use strings from FW
- handle errors from PDS_CORE_CMD_INIT devcmd call
- tighten up health thread use of config_lock
- remove pdsc_queue_health_check() layer over queuing health check
- start pds_core.rst file in first patch, add to it incrementally
- give more user interaction info in commit messages
- removed a few more extraneous includes

  v8:
Link: https://lore.kernel.org/netdev/20230330234628.14627-1-shannon.nelson@amd.com/
- fixed deadlock problem, use devl_health_reporter_destroy() when devlink is locked
- don't clear client_id until after auxiliary_device_uninit()

  v7:
Link: https://lore.kernel.org/netdev/20230330192313.62018-1-shannon.nelson@amd.com/
- use explicit devlink locking and devl_* APIs
- move some of devlink setup logic into probe and remove
- use debugfs_create_u{type}() for state and queue head and tail
- add include for linux/vmalloc.h
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303260420.Tgq0qobF-lkp@intel.com/
  v6:
Link: https://lore.kernel.org/netdev/20230324190243.27722-1-shannon.nelson@amd.com/
- removed version.h include noticed by kernel test robot's version check
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303230742.pX3ply0t-lkp@intel.com/
- fixed up the more egregious checkpatch line length complaints
- make sure pdsc_auxbus_dev_register() checks padev pointer errcode

  v5:
Link: https://lore.kernel.org/netdev/20230322185626.38758-1-shannon.nelson@amd.com/
- added devlink health reporter for FW issues
- removed asic_type, asic_rev, serial_num, fw_version from debugfs as
   they are available through other means
- trimed OS info in pdsc_identify(), we don't need to send that much info to the FW
- removed reg/unreg from auxbus client API, they are now in the core when VF
   is started
- removed need for pdsc definition in client by simplifying the padev to only carry
   struct pci_dev pointers rather than full struct pdsc to the pf and vf
- removed the unused pdsc argument in pdsc_notify()
- moved include/linux/pds/pds_core.h to driver/../pds_core/core.h
- restored a few pds_core_if.h interface values and structs that are shared
   with FW source
- moved final config_lock unlock to before tear down of timer and workqueue
   to be sure there are no deadlocks while waiting for any stragglers
- changed use of PAGE_SIZE to local PDS_PAGE_SIZE to keep with FW layout needs
   without regard to kernel PAGE_SIZE configuration
- removed the redundant *adminqcq argument from pdsc_adminq_post()

  v4:
Link: https://lore.kernel.org/netdev/20230308051310.12544-1-shannon.nelson@amd.com/
- reworked to attach to both Core PF and vDPA VF PCI devices
- now creates auxiliary_device as part of each VF PCI probe, removes them on PCI remove
- auxiliary devices now use simple unique id rather than PCI address for identifier
- replaced home-grown event publishing with kernel-based notifier service
- dropped live_migration parameter, not needed when not creating aux device for it
- replaced devm_* functions with traditional interfaces
- added MAINTAINERS entry
- removed lingering traces of set/get_vf attribute adminq commands
- trimmed some include lists
- cleaned a kernel test robot complaint about a stray unused variable
Link: https://lore.kernel.org/oe-kbuild-all/202302181049.yeUQMeWY-lkp@intel.com/
  v3:
Link: https://lore.kernel.org/netdev/20230217225558.19837-1-shannon.nelson@amd.com/
- changed names from "pensando" to "amd" and updated copyright strings
- dropped the DEVLINK_PARAM_GENERIC_ID_FW_BANK for future development
- changed the auxiliary device creation to be triggered by the
   PCI bus event BOUND_DRIVER, and torn down at UNBIND_DRIVER in order
   to properly handle users using the sysfs bind/unbind functions
- dropped some noisy log messages
- rebased to current net-next

  RFC to v2:
Link: https://lore.kernel.org/netdev/20221207004443.33779-1-shannon.nelson@amd.com/
- added separate devlink param patches for DEVLINK_PARAM_GENERIC_ID_ENABLE_MIGRATION
   and DEVLINK_PARAM_GENERIC_ID_FW_BANK, and dropped the driver specific implementations
- updated descriptions for the new devlink parameters
- dropped netdev support
- dropped vDPA patches, will followup later
- separated fw update and fw bank select into their own patches

  RFC:
Link: https://lore.kernel.org/netdev/20221118225656.48309-1-snelson@pensando.io/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

pds_core: Kconfig and pds_core.rst

Remaining documentation and Kconfig hook for building the driver.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

pds_core: publish events to the clients

When the Core device gets an event from the device, or notices
the device FW to be up or down, it needs to send those events
on to the clients that have an event handler. Add the code to
pass along the events to the clients.

The entry points pdsc_register_notify() and pdsc_unregister_notify()
are EXPORTed for other drivers that want to listen for these events.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

pds_core: add the aux client API

Add the client API operations for running adminq commands.
The core registers the client with the FW, then the client
has a context for requesting adminq services. We expect
to add additional operations for other clients, including
requesting additional private adminqs and IRQs, but don't have
the need yet.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

pds_core: devlink params for enabling VIF support

Add the devlink parameter switches so the user can enable
the features supported by the VFs.  The only feature supported
at the moment is vDPA.

Example:
    devlink dev param set pci/0000:2b:00.0 \
    name enable_vnet cmode runtime value true

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

pds_core: add auxiliary_bus devices

An auxiliary_bus device is created for each vDPA type VF at VF
probe and destroyed at VF remove. The aux device name comes
from the driver name + VIF type + the unique id assigned at PCI
probe. The VFs are always removed on PF remove, so there should
be no issues with VFs trying to access missing PF structures.

The auxiliary_device names will look like "pds_core.vDPA.nn"
where 'nn' is the VF's uid.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

pds_core: add initial VF device handling

This is the initial VF PCI driver framework for the new
pds_vdpa VF device, which will work in conjunction with an
auxiliary_bus client of the pds_core driver. This does the
very basics of registering for the new VF device, setting
up debugfs entries, and registering with devlink.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

pds_core: set up the VIF definitions and defaults

The Virtual Interfaces (VIFs) supported by the DSC's
configuration (vDPA, Eth, RDMA, etc) are reported in the
dev_ident struct and made visible in debugfs. At this point
only vDPA is supported in this driver so we only setup
devices for that feature.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

pds_core: add FW update feature to devlink

Add in the support for doing firmware updates.  Of the two
main banks available, a and b, this updates the one not in
use and then selects it for the next boot.

Example:
    devlink dev flash pci/0000:b2:00.0 \
    file pensando/dsc_fw_1.63.0-22.tar

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

pds_core: Add adminq processing and commands

Add the service routines for submitting and processing
the adminq messages and for handling notifyq events.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

pds_core: set up device and adminq

Set up the basic adminq and notifyq queue structures.  These are
used mostly by the client drivers for feature configuration.
These are essentially the same adminq and notifyq as in the
ionic driver.

Part of this includes querying for device identity and FW
information, so we can make that available to devlink dev info.

  $ devlink dev info pci/0000:b5:00.0
  pci/0000:b5:00.0:
    driver pds_core
    serial_number FLM18420073
    versions:
        fixed:
          asic.id 0x0
          asic.rev 0x0
        running:
          fw 1.51.0-73
        stored:
          fw.goldfw 1.15.9-C-22
          fw.mainfwa 1.60.0-73
          fw.mainfwb 1.60.0-57

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

pds_core: add devlink health facilities

Add devlink health reporting on top of our fw watchdog.

Example:
  # devlink health show pci/0000:2b:00.0 reporter fw
  pci/0000:2b:00.0:
    reporter fw
      state healthy error 0 recover 0
  # devlink health diagnose pci/0000:2b:00.0 reporter fw
   Status: healthy State: 1 Generation: 0 Recoveries: 0

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

pds_core: health timer and workqueue

Add in the periodic health check and the related workqueue,
as well as the handlers for when a FW reset is seen.

The firmware is polled every 5 seconds to be sure that it is
still alive and that the FW generation didn't change.

The alive check looks to see that the PCI bus is still readable
and the fw_status still has the RUNNING bit on.  If not alive,
the driver stops activity and tears things down.  When the FW
recovers and the alive check again succeeds, the driver sets
back up for activity.

The generation check looks at the fw_generation to see if it
has changed, which can happen if the FW crashed and recovered
or was updated in between health checks.  If changed, the
driver counts that as though the alive test failed and forces
the fw_down/fw_up cycle.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

pds_core: add devcmd device interfaces

The devcmd interface is the basic connection to the device through the
PCI BAR for low level identification and command services. This does
the early device initialization and finds the identity data, and adds
devcmd routines to be used by later driver bits.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

pds_core: initial framework for pds_core PF driver

This is the initial PCI driver framework for the new pds_core device
driver and its family of devices. This does the very basics of
registering for the new PF PCI device 1dd8:100c, setting up debugfs
entries, and registering with devlink.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'bridge-neigh-suppression'

Ido Schimmel says:

====================
bridge: Add per-{Port, VLAN} neighbor suppression

Background
==========

In order to minimize the flooding of ARP and ND messages in the VXLAN
network, EVPN includes provisions [1] that allow participating VTEPs to
suppress such messages in case they know the MAC-IP binding and can
reply on behalf of the remote host. In Linux, the above is implemented
in the bridge driver using a per-port option called "neigh_suppress"
that was added in kernel version 4.15 [2].

Motivation
==========

Some applications use ARP messages as keepalives between the application
nodes in the network. This works perfectly well when two nodes are
connected to the same VTEP. When a node goes down it will stop
responding to ARP requests and the other node will notice it
immediately.

However, when the two nodes are connected to different VTEPs and
neighbor suppression is enabled, the local VTEP will reply to ARP
requests even after the remote node went down, until certain timers
expire and the EVPN control plane decides to withdraw the MAC/IP
Advertisement route for the address. Therefore, some users would like to
be able to disable neighbor suppression on VLANs where such applications
reside and keep it enabled on the rest.

Implementation
==============

The proposed solution is to allow user space to control neighbor
suppression on a per-{Port, VLAN} basis, in a similar fashion to other
per-port options that gained per-{Port, VLAN} counterparts such as
"mcast_router". This allows users to benefit from the operational
simplicity and scalability associated with shared VXLAN devices (i.e.,
external / collect-metadata mode), while still allowing for per-VLAN/VNI
neighbor suppression control.

The user interface is extended with a new "neigh_vlan_suppress" bridge
port option that allows user space to enable per-{Port, VLAN} neighbor
suppression on the bridge port. When enabled, the existing
"neigh_suppress" option has no effect and neighbor suppression is
controlled using a new "neigh_suppress" VLAN option. Example usage:

# bridge link set dev vxlan0 neigh_vlan_suppress on
# bridge vlan add vid 10 dev vxlan0
# bridge vlan set vid 10 dev vxlan0 neigh_suppress on

Testing
=======

Tested using existing bridge selftests. Added a dedicated selftest in
the last patch.

Patchset overview
=================

Patches #1-#5 are preparations.

Patch #6 adds per-{Port, VLAN} neighbor suppression support to the
bridge's data path.

Patches #7-#8 add the required netlink attributes to enable the feature.

Patch #9 adds a selftest.

iproute2 patches can be found here [3].

Changelog
=========

Since RFC [4]:

No changes.

[1] https://www.rfc-editor.org/rfc/rfc7432#section-10
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a42317785c898c0ed46db45a33b0cc71b671bf29
[3] https://github.com/idosch/iproute2/tree/submit/neigh_suppress_v1
[4] https://lore.kernel.org/netdev/20230413095830.2182382-1-idosch@nvidia.com/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: net: Add bridge neighbor suppression test

Add test cases for bridge neighbor suppression, testing both per-port
and per-{Port, VLAN} neighbor suppression with both ARP and NS packets.

Example truncated output:

# ./test_bridge_neigh_suppress.sh
[...]
Tests passed: 148
Tests failed: 0

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

bridge: Allow setting per-{Port, VLAN} neighbor suppression state

Add a new bridge port attribute that allows user space to enable
per-{Port, VLAN} neighbor suppression. Example:

# bridge -d -j -p link show dev swp1 | jq '.[]["neigh_vlan_suppress"]'
false
# bridge link set dev swp1 neigh_vlan_suppress on
# bridge -d -j -p link show dev swp1 | jq '.[]["neigh_vlan_suppress"]'
true
# bridge link set dev swp1 neigh_vlan_suppress off
# bridge -d -j -p link show dev swp1 | jq '.[]["neigh_vlan_suppress"]'
false

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

bridge: vlan: Allow setting VLAN neighbor suppression state

Add a new VLAN attribute that allows user space to set the neighbor
suppression state of the port VLAN. Example:

# bridge -d -j -p vlan show dev swp1 vid 10 | jq '.[]["vlans"][]["neigh_suppress"]'
false
# bridge vlan set vid 10 dev swp1 neigh_suppress on
# bridge -d -j -p vlan show dev swp1 vid 10 | jq '.[]["vlans"][]["neigh_suppress"]'
true
# bridge vlan set vid 10 dev swp1 neigh_suppress off
# bridge -d -j -p vlan show dev swp1 vid 10 | jq '.[]["vlans"][]["neigh_suppress"]'
false

# bridge vlan set vid 10 dev br0 neigh_suppress on
Error: bridge: Can't set neigh_suppress for non-port vlans.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>