fuse: continue to send FUSE_RELEASEDIR when FUSE_OPEN returns ENOSYS

commit 2e64ff154ce6ce9a8dc0f9556463916efa6ff460 upstream.

When FUSE_OPEN returns ENOSYS, the no_open bit is set on the connection.

Because the FUSE_RELEASE and FUSE_RELEASEDIR paths share code, this
incorrectly caused the FUSE_RELEASEDIR request to be dropped and never sent
to userspace.

Pass an isdir bool to distinguish between FUSE_RELEASE and FUSE_RELEASEDIR
inside of fuse_file_put.

Fixes: 7678ac50615d ("fuse: support clients that don't implement 'open'")
Cc: <stable@vger.kernel.org> # v3.14
Signed-off-by: Chad Austin <chadaustin@fb.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci: fix the timeout check window for clock and reset

commit b704441e38f645dcfba1348ca3cc1ba43d1a9f31 upstream.

We observed some premature timeouts on a virtualization platform, the log
is like this:

case 1:
[159525.255629] mmc1: Internal clock never stabilised.
[159525.255818] mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
[159525.256049] mmc1: sdhci: Sys addr:  0x00000000 | Version:  0x00001002
...
[159525.257205] mmc1: sdhci: Wake-up:   0x00000000 | Clock:    0x0000fa03
From the clock control register dump, we are pretty sure the clock was
stablized.

case 2:
[  914.550127] mmc1: Reset 0x2 never completed.
[  914.550321] mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
[  914.550608] mmc1: sdhci: Sys addr:  0x00000010 | Version:  0x00001002

After checking the sdhci code, we found the timeout check actually has a
little window that the CPU can be scheduled out and when it comes back,
the original time set or check is not valid.

Fixes: 5a436cc0af62 ("mmc: sdhci: Optimize delay loops")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Alek Du <alek.du@intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5910/OMAP310

commit e8cde625bfe8a714a856e1366bcbb259d7346095 upstream.

Since v2.6.22 or so there has been reports [1] about OMAP MMC being
broken on OMAP15XX based hardware (OMAP5910 and OMAP310). The breakage
seems to have been caused by commit 46a6730e3ff9 ("mmc-omap: Fix
omap to use MMC_POWER_ON") that changed clock enabling to be done
on MMC_POWER_ON. This can happen multiple times in a row, and on 15XX
the hardware doesn't seem to like it and the MMC just stops responding.
Fix by memorizing the power mode and do the init only when necessary.

Before the patch (on Palm TE):

mmc0: new SD card at address b368
mmcblk0: mmc0:b368 SDC   977 MiB
mmci-omap mmci-omap.0: command timeout (CMD18)
mmci-omap mmci-omap.0: command timeout (CMD13)
mmci-omap mmci-omap.0: command timeout (CMD13)
mmci-omap mmci-omap.0: command timeout (CMD12) [x 6]
mmci-omap mmci-omap.0: command timeout (CMD13) [x 6]
mmcblk0: error -110 requesting status
mmci-omap mmci-omap.0: command timeout (CMD8)
mmci-omap mmci-omap.0: command timeout (CMD18)
mmci-omap mmci-omap.0: command timeout (CMD13)
mmci-omap mmci-omap.0: command timeout (CMD13)
mmci-omap mmci-omap.0: command timeout (CMD12) [x 6]
mmci-omap mmci-omap.0: command timeout (CMD13) [x 6]
mmcblk0: error -110 requesting status
mmcblk0: recovery failed!
print_req_error: I/O error, dev mmcblk0, sector 0
Buffer I/O error on dev mmcblk0, logical block 0, async page read
 mmcblk0: unable to read partition table

After the patch:

mmc0: new SD card at address b368
mmcblk0: mmc0:b368 SDC   977 MiB
 mmcblk0: p1

The patch is based on a fix and analysis done by Ladislav Michl.

Tested on OMAP15XX/OMAP310 (Palm TE), OMAP1710 (Nokia 770)
and OMAP2420 (Nokia N810).

[1] https://marc.info/?t=123175197000003&r=1&w=2

Fixes: 46a6730e3ff9 ("mmc-omap: Fix omap to use MMC_POWER_ON")
Reported-by: Ladislav Michl <ladis@linux-mips.org>
Reported-by: Andrzej Zaborowski <balrogg@gmail.com>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dma-mapping: Fix FORCE_CONTIGUOUS buffer clearing

commit 3238c359acee4ab57f15abb5a82b8ab38a661ee7 upstream.

We need to invalidate the caches *before* clearing the buffer via the
non-cacheable alias, else in the worst case __dma_flush_area() may
write back dirty lines over the top of our nice new zeros.

Fixes: dd65a941f6ba ("arm64: dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag")
Cc: <stable@vger.kernel.org> # 4.18.x-
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

userfaultfd: check VM_MAYWRITE was set after verifying the uffd is registered

commit 01e881f5a1fca4677e82733061868c6d6ea05ca7 upstream.

Calling UFFDIO_UNREGISTER on virtual ranges not yet registered in uffd
could trigger an harmless false positive WARN_ON.  Check the vma is
already registered before checking VM_MAYWRITE to shut off the false
positive warning.

Link: http://lkml.kernel.org/r/20181206212028.18726-2-aarcange@redhat.com
Cc: <stable@vger.kernel.org>
Fixes: 29ec90660d68 ("userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: syzbot+06c7092e7d71218a2c16@syzkaller.appspotmail.com
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

aio: fix spectre gadget in lookup_ioctx

commit a538e3ff9dabcdf6c3f477a373c629213d1c3066 upstream.

Matthew pointed out that the ioctx_table is susceptible to spectre v1,
because the index can be controlled by an attacker.  The below patch
should mitigate the attack for all of the aio system calls.

Cc: stable@vger.kernel.org
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: sunxi: a83t: Fix IRQ offset typo for PH11

commit 478b6767ad26ab86d9ecc341027dd09a87b1f997 upstream.

Pin PH11 is used on various A83T board to detect a change in the OTG
port's ID pin, as in when an OTG host cable is plugged in.

The incorrect offset meant the gpiochip/irqchip was activating the wrong
pin for interrupts.

Fixes: 4730f33f0d82 ("pinctrl: sunxi: add allwinner A83T PIO controller support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timer/debug: Change /proc/timer_list from 0444 to 0400

[ Upstream commit 8e7df2b5b7f245c9bd11064712db5cb69044a362 ]

While it uses %pK, there's still few reasons to read this file
as non-root.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.14.89

tcp: lack of available data can also cause TSO defer

commit f9bfe4e6a9d08d405fe7b081ee9a13e649c97ecf upstream.

tcp_tso_should_defer() can return true in three different cases :

 1) We are cwnd-limited
 2) We are rwnd-limited
 3) We are application limited.

Neal pointed out that my recent fix went too far, since
it assumed that if we were not in 1) case, we must be rwnd-limited

Fix this by properly populating the is_cwnd_limited and
is_rwnd_limited booleans.

After this change, we can finally move the silly check for FIN
flag only for the application-limited case.

The same move for EOR bit will be handled in net-next,
since commit 1c09f7d073b1 ("tcp: do not try to defer skbs
with eor mark (MSG_EOR)") is scheduled for linux-4.21

Tested by running 200 concurrent netperf -t TCP_RR -- -r 60000,100
and checking none of them was rwnd_limited in the chrono_stat
output from "ss -ti" command.

Fixes: 41727549de3e ("tcp: Do not underestimate rwnd_limited")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Fix an out-of-bounds access in get_hw_stats

commit 36d842194a57f1b21fbc6a6875f2fa2f9a7f8679 upstream.

When running with KASAN, the following trace is produced:

[   62.535888]

==================================================================
[   62.544930] BUG: KASAN: slab-out-of-bounds in
gut_hw_stats+0x122/0x230 [hfi1]
[   62.553856] Write of size 8 at addr ffff88080e8d6330 by task
kworker/0:1/14

[   62.565333] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted
4.19.0-test-build-kasan+ #8
[   62.575087] Hardware name: Intel Corporation S2600KPR/S2600KPR, BIOS
SE5C610.86B.01.01.0019.101220160604 10/12/2016
[   62.587951] Workqueue: events work_for_cpu_fn
[   62.594050] Call Trace:
[   62.598023]  dump_stack+0xc6/0x14c
[   62.603089]  ? dump_stack_print_info.cold.1+0x2f/0x2f
[   62.610041]  ? kmsg_dump_rewind_nolock+0x59/0x59
[   62.616615]  ? get_hw_stats+0x122/0x230 [hfi1]
[   62.622985]  print_address_description+0x6c/0x23c
[   62.629744]  ? get_hw_stats+0x122/0x230 [hfi1]
[   62.636108]  kasan_report.cold.6+0x241/0x308
[   62.642365]  get_hw_stats+0x122/0x230 [hfi1]
[   62.648703]  ? hfi1_alloc_rn+0x40/0x40 [hfi1]
[   62.655088]  ? __kmalloc+0x110/0x240
[   62.660695]  ? hfi1_alloc_rn+0x40/0x40 [hfi1]
[   62.667142]  setup_hw_stats+0xd8/0x430 [ib_core]
[   62.673972]  ? show_hfi+0x50/0x50 [hfi1]
[   62.680026]  ib_device_register_sysfs+0x165/0x180 [ib_core]
[   62.687995]  ib_register_device+0x5a2/0xa10 [ib_core]
[   62.695340]  ? show_hfi+0x50/0x50 [hfi1]
[   62.701421]  ? ib_unregister_device+0x2e0/0x2e0 [ib_core]
[   62.709222]  ? __vmalloc_node_range+0x2d0/0x380
[   62.716131]  ? rvt_driver_mr_init+0x11f/0x2d0 [rdmavt]
[   62.723735]  ? vmalloc_node+0x5c/0x70
[   62.729697]  ? rvt_driver_mr_init+0x11f/0x2d0 [rdmavt]
[   62.737347]  ? rvt_driver_mr_init+0x1f5/0x2d0 [rdmavt]
[   62.744998]  ? __rvt_alloc_mr+0x110/0x110 [rdmavt]
[   62.752315]  ? rvt_rc_error+0x140/0x140 [rdmavt]
[   62.759434]  ? rvt_vma_open+0x30/0x30 [rdmavt]
[   62.766364]  ? mutex_unlock+0x1d/0x40
[   62.772445]  ? kmem_cache_create_usercopy+0x15d/0x230
[   62.780115]  rvt_register_device+0x1f6/0x360 [rdmavt]
[   62.787823]  ? rvt_get_port_immutable+0x180/0x180 [rdmavt]
[   62.796058]  ? __get_txreq+0x400/0x400 [hfi1]
[   62.802969]  ? memcpy+0x34/0x50
[   62.808611]  hfi1_register_ib_device+0xde6/0xeb0 [hfi1]
[   62.816601]  ? hfi1_get_npkeys+0x10/0x10 [hfi1]
[   62.823760]  ? hfi1_init+0x89f/0x9a0 [hfi1]
[   62.830469]  ? hfi1_setup_eagerbufs+0xad0/0xad0 [hfi1]
[   62.838204]  ? pcie_capability_clear_and_set_word+0xcd/0xe0
[   62.846429]  ? pcie_capability_read_word+0xd0/0xd0
[   62.853791]  ? hfi1_pcie_init+0x187/0x4b0 [hfi1]
[   62.860958]  init_one+0x67f/0xae0 [hfi1]
[   62.867301]  ? hfi1_init+0x9a0/0x9a0 [hfi1]
[   62.873876]  ? wait_woken+0x130/0x130
[   62.879860]  ? read_word_at_a_time+0xe/0x20
[   62.886329]  ? strscpy+0x14b/0x280
[   62.891998]  ? hfi1_init+0x9a0/0x9a0 [hfi1]
[   62.898405]  local_pci_probe+0x70/0xd0
[   62.904295]  ? pci_device_shutdown+0x90/0x90
[   62.910833]  work_for_cpu_fn+0x29/0x40
[   62.916750]  process_one_work+0x584/0x960
[   62.922974]  ? rcu_work_rcufn+0x40/0x40
[   62.928991]  ? __schedule+0x396/0xdc0
[   62.934806]  ? __sched_text_start+0x8/0x8
[   62.941020]  ? pick_next_task_fair+0x68b/0xc60
[   62.947674]  ? run_rebalance_domains+0x260/0x260
[   62.954471]  ? __list_add_valid+0x29/0xa0
[   62.960607]  ? move_linked_works+0x1c7/0x230
[   62.967077]  ?
trace_event_raw_event_workqueue_execute_start+0x140/0x140
[   62.976248]  ? mutex_lock+0xa6/0x100
[   62.982029]  ? __mutex_lock_slowpath+0x10/0x10
[   62.988795]  ? __switch_to+0x37a/0x710
[   62.994731]  worker_thread+0x62e/0x9d0
[   63.000602]  ? max_active_store+0xf0/0xf0
[   63.006828]  ? __switch_to_asm+0x40/0x70
[   63.012932]  ? __switch_to_asm+0x34/0x70
[   63.019013]  ? __switch_to_asm+0x40/0x70
[   63.025042]  ? __switch_to_asm+0x34/0x70
[   63.031030]  ? __switch_to_asm+0x40/0x70
[   63.037006]  ? __schedule+0x396/0xdc0
[   63.042660]  ? kmem_cache_alloc_trace+0xf3/0x1f0
[   63.049323]  ? kthread+0x59/0x1d0
[   63.054594]  ? ret_from_fork+0x35/0x40
[   63.060257]  ? __sched_text_start+0x8/0x8
[   63.066212]  ? schedule+0xcf/0x250
[   63.071529]  ? __wake_up_common+0x110/0x350
[   63.077794]  ? __schedule+0xdc0/0xdc0
[   63.083348]  ? wait_woken+0x130/0x130
[   63.088963]  ? finish_task_switch+0x1f1/0x520
[   63.095258]  ? kasan_unpoison_shadow+0x30/0x40
[   63.101792]  ? __init_waitqueue_head+0xa0/0xd0
[   63.108183]  ? replenish_dl_entity.cold.60+0x18/0x18
[   63.115151]  ? _raw_spin_lock_irqsave+0x25/0x50
[   63.121754]  ? max_active_store+0xf0/0xf0
[   63.127753]  kthread+0x1ae/0x1d0
[   63.132894]  ? kthread_bind+0x30/0x30
[   63.138422]  ret_from_fork+0x35/0x40

[   63.146973] Allocated by task 14:
[   63.152077]  kasan_kmalloc+0xbf/0xe0
[   63.157471]  __kmalloc+0x110/0x240
[   63.162804]  init_cntrs+0x34d/0xdf0 [hfi1]
[   63.168883]  hfi1_init_dd+0x29a3/0x2f90 [hfi1]
[   63.175244]  init_one+0x551/0xae0 [hfi1]
[   63.181065]  local_pci_probe+0x70/0xd0
[   63.186759]  work_for_cpu_fn+0x29/0x40
[   63.192310]  process_one_work+0x584/0x960
[   63.198163]  worker_thread+0x62e/0x9d0
[   63.203843]  kthread+0x1ae/0x1d0
[   63.208874]  ret_from_fork+0x35/0x40

[   63.217203] Freed by task 1:
[   63.221844]  __kasan_slab_free+0x12e/0x180
[   63.227844]  kfree+0x92/0x1a0
[   63.232570]  single_release+0x3a/0x60
[   63.238024]  __fput+0x1d9/0x480
[   63.242911]  task_work_run+0x139/0x190
[   63.248440]  exit_to_usermode_loop+0x191/0x1a0
[   63.254814]  do_syscall_64+0x301/0x330
[   63.260283]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[   63.270199] The buggy address belongs to the object at
ffff88080e8d5500
 which belongs to the cache kmalloc-4096 of size 4096
[   63.287247] The buggy address is located 3632 bytes inside of
 4096-byte region [ffff88080e8d5500, ffff88080e8d6500)
[   63.303564] The buggy address belongs to the page:
[   63.310447] page:ffffea00203a3400 count:1 mapcount:0
mapping:ffff88081380e840 index:0x0 compound_mapcount: 0
[   63.323102] flags: 0x2fffff80008100(slab|head)
[   63.329775] raw: 002fffff80008100 0000000000000000 0000000100000001
ffff88081380e840
[   63.340175] raw: 0000000000000000 0000000000070007 00000001ffffffff
0000000000000000
[   63.350564] page dumped because: kasan: bad access detected

[   63.361974] Memory state around the buggy address:
[   63.369137]  ffff88080e8d6200: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
[   63.379082]  ffff88080e8d6280: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
[   63.389032] >ffff88080e8d6300: 00 00 00 00 00 00 fc fc fc fc fc fc fc
fc fc fc
[   63.398944]                                      ^
[   63.406141]  ffff88080e8d6380: fc fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc
[   63.416109]  ffff88080e8d6400: fc fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc
[   63.426099]
==================================================================

The trace happens because get_hw_stats() assumes there is room in the
memory allocated in init_cntrs() to accommodate the driver counters.
Unfortunately, that routine only allocated space for the device
counters.

Fix by insuring the allocation has room for the additional driver
counters.

Cc: <Stable@vger.kernel.org> # v4.14+
Fixes: b7481944b06e9 ("IB/hfi1: Show statistics counters under IB stats interface")
Reviewed-by: Mike Marciniczyn <mike.marciniszyn@intel.com>
Reviewed-by: Mike Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Piotr Stankiewicz <piotr.stankiewicz@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Fixed headphone issue for ALC700

commit bde1a7459623a66c2abec4d0a841e4b06cc88d9a upstream.

If it plugged headphone or headset into the jack, then
do the reboot, it will have a chance to cause headphone no sound.
It just need to run the headphone mode procedure after boot time.
The issue will be fixed.
It also suitable for ALC234 ALC274 and ALC294.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: fireface: fix reference to wrong register for clock configuration

commit fa9c98e4b975bb3192ed6af09d9fa282ed3cd8a0 upstream.

In an initial commit, 'SYNC_STATUS' register is referred to get
clock configuration, however this is wrong, according to my local
note at hand for reverse-engineering about packet dump. It should
be 'CLOCK_CONFIG' register. Actually, ff400_dump_clock_config()
is correctly programmed.

This commit fixes the bug.

Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 76fdb3a9e13a ('ALSA: fireface: add support for Fireface 400')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: Replace strncpy with memcpy

commit fd29edc7232bc19f969e8f463138afc5472b3d5f upstream.

gcc 8.1.0 generates the following warnings.

drivers/staging/speakup/kobjects.c: In function 'punc_store':
drivers/staging/speakup/kobjects.c:522:2: warning:
'strncpy' output truncated before terminating nul
copying as many bytes from a string as its length
drivers/staging/speakup/kobjects.c:504:6: note: length computed here

drivers/staging/speakup/kobjects.c: In function 'synth_store':
drivers/staging/speakup/kobjects.c:391:2: warning:
'strncpy' output truncated before terminating nul
copying as many bytes from a string as its length
drivers/staging/speakup/kobjects.c:388:8: note: length computed here

Using strncpy() is indeed less than perfect since the length of data to
be copied has already been determined with strlen(). Replace strncpy()
with memcpy() to address the warning and optimize the code a little.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

flexfiles: enforce per-mirror stateid only for v4 DSes

commit 320f35b7bf8cccf1997ca3126843535e1b95e9c4 upstream.

Since commit bb21ce0ad227 we always enforce per-mirror stateid.
However, this makes sense only for v4+ servers.

Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/rbtree-test: lower default params

commit 0b548e33e6cb2bff240fdaf1783783be15c29080 upstream.

Fengguang reported soft lockups while running the rbtree and interval
tree test modules.  The logic for these tests all occur in init phase,
and we currently are pounding with the default values for number of
nodes and number of iterations of each test.  Reduce the latter by two
orders of magnitude.  This does not influence the value of the tests in
that one thousand times by default is enough to get the picture.

Link: http://lkml.kernel.org/r/20171109161715.xai2dtwqw2frhkcm@linux-n805
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

printk: Wake klogd when passing console_lock owner

[ Upstream commit c14376de3a1befa70d9811ca2872d47367b48767 ]

wake_klogd is a local variable in console_unlock(). The information
is lost when the console_lock owner using the busy wait added by
the commit dbdda842fe96f8932 ("printk: Add console owner and waiter
logic to load balance console writes"). The following race is
possible:

CPU0 CPU1
console_unlock()

  for (;;)
     /* calling console for last message */

printk()
  log_store()
    log_next_seq++;

     /* see new message */
     if (seen_seq != log_next_seq) {
wake_klogd = true;
seen_seq = log_next_seq;
     }

     console_lock_spinning_enable();

  if (console_trylock_spinning())
     /* spinning */

     if (console_lock_spinning_disable_and_check()) {
printk_safe_exit_irqrestore(flags);
return;

  console_unlock()
    if (seen_seq != log_next_seq) {
    /* already seen */
    /* nothing to do */

Result: Nobody would wakeup klogd.

One solution would be to make a global variable from wake_klogd.
But then we would need to manipulate it under a lock or so.

This patch wakes klogd also when console_lock is passed to the
spinning waiter. It looks like the right way to go. Also userspace
should have a chance to see and store any "flood" of messages.

Note that the very late klogd wake up was a historic solution.
It made sense on single CPU systems or when sys_syslog() operations
were synchronized using the big kernel lock like in v2.1.113.
But it is questionable these days.

Fixes: dbdda842fe96f8932 ("printk: Add console owner and waiter logic to load balance console writes")
Link: http://lkml.kernel.org/r/20180226155734.dzwg3aovqnwtvkoy@pathway.suse.cz
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Suggested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

printk: Never set console_may_schedule in console_trylock()

[ Upstream commit fd5f7cde1b85d4c8e09ca46ce948e008a2377f64 ]

This patch, basically, reverts commit 6b97a20d3a79 ("printk:
set may_schedule for some of console_trylock() callers").
That commit was a mistake, it introduced a big dependency
on the scheduler, by enabling preemption under console_sem
in printk()->console_unlock() path, which is rather too
critical. The patch did not significantly reduce the
possibilities of printk() lockups, but made it possible to
stall printk(), as has been reported by Tetsuo Handa [1].

Another issues is that preemption under console_sem also
messes up with Steven Rostedt's hand off scheme, by making
it possible to sleep with console_sem both in console_unlock()
and in vprintk_emit(), after acquiring the console_sem
ownership (anywhere between printk_safe_exit_irqrestore() in
console_trylock_spinning() and printk_safe_enter_irqsave()
in console_unlock()). This makes hand off less likely and,
at the same time, may result in a significant amount of
pending logbuf messages. Preempted console_sem owner makes
it impossible for other CPUs to emit logbuf messages, but
does not make it impossible for other CPUs to append new
messages to the logbuf.

Reinstate the old behavior and make printk() non-preemptible.
Should any printk() lockup reports arrive they must be handled
in a different way.

[1] http://lkml.kernel.org/r/201603022101.CAH73907.OVOOMFHFFtQJSL%20()%20I-love%20!%20SAKURA%20!%20ne%20!%20jp
Fixes: 6b97a20d3a79 ("printk: set may_schedule for some of console_trylock() callers")
Link: http://lkml.kernel.org/r/20180116044716.GE6607@jagdpanzerIV
To: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: akpm@linux-foundation.org
Cc: linux-mm@kvack.org
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

printk: Hide console waiter logic into helpers

[ Upstream commit c162d5b4338d72deed61aa65ed0f2f4ba2bbc8ab ]

The commit ("printk: Add console owner and waiter logic to load balance
console writes") made vprintk_emit() and console_unlock() even more
complicated.

This patch extracts the new code into 3 helper functions. They should
help to keep it rather self-contained. It will be easier to use and
maintain.

This patch just shuffles the existing code. It does not change
the functionality.

Link: http://lkml.kernel.org/r/20180112160837.GD24497@linux.suse
Cc: akpm@linux-foundation.org
Cc: linux-mm@kvack.org
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: rostedt@home.goodmis.org
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

printk: Add console owner and waiter logic to load balance console writes

[ Upstream commit dbdda842fe96f8932bae554f0adf463c27c42bc7 ]

This patch implements what I discussed in Kernel Summit. I added
lockdep annotation (hopefully correctly), and it hasn't had any splats
(since I fixed some bugs in the first iterations). It did catch
problems when I had the owner covering too much. But now that the owner
is only set when actively calling the consoles, lockdep has stayed
quiet.

Here's the design again:

I added a "console_owner" which is set to a task that is actively
writing to the consoles. It is *not* the same as the owner of the
console_lock. It is only set when doing the calls to the console
functions. It is protected by a console_owner_lock which is a raw spin
lock.

There is a console_waiter. This is set when there is an active console
owner that is not current, and waiter is not set. This too is protected
by console_owner_lock.

In printk() when it tries to write to the consoles, we have:

if (console_trylock())
console_unlock();

Now I added an else, which will check if there is an active owner, and
no current waiter. If that is the case, then console_waiter is set, and
the task goes into a spin until it is no longer set.

When the active console owner finishes writing the current message to
the consoles, it grabs the console_owner_lock and sees if there is a
waiter, and clears console_owner.

If there is a waiter, then it breaks out of the loop, clears the waiter
flag (because that will release the waiter from its spin), and exits.
Note, it does *not* release the console semaphore. Because it is a
semaphore, there is no owner. Another task may release it. This means
that the waiter is guaranteed to be the new console owner! Which it
becomes.

Then the waiter calls console_unlock() and continues to write to the
consoles.

If another task comes along and does a printk() it too can become the
new waiter, and we wash rinse and repeat!

By Petr Mladek about possible new deadlocks:

The thing is that we move console_sem only to printk() call
that normally calls console_unlock() as well. It means that
the transferred owner should not bring new type of dependencies.
As Steven said somewhere: "If there is a deadlock, it was
there even before."

We could look at it from this side. The possible deadlock would
look like:

CPU0                            CPU1

console_unlock()

  console_owner = current;

spin_lockA()
  printk()
    spin = true;
    while (...)

    call_console_drivers()
      spin_lockA()

This would be a deadlock. CPU0 would wait for the lock A.
While CPU1 would own the lockA and would wait for CPU0
to finish calling the console drivers and pass the console_sem
owner.

But if the above is true than the following scenario was
already possible before:

CPU0

spin_lockA()
  printk()
    console_unlock()
      call_console_drivers()
spin_lockA()

By other words, this deadlock was there even before. Such
deadlocks are prevented by using printk_deferred() in
the sections guarded by the lock A.

By Steven Rostedt:

To demonstrate the issue, this module has been shown to lock up a
system with 4 CPUs and a slow console (like a serial console). It is
also able to lock up a 8 CPU system with only a fast (VGA) console, by
passing in "loops=100". The changes in this commit prevent this module
from locking up the system.

 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/mutex.h>
 #include <linux/workqueue.h>
 #include <linux/hrtimer.h>

 static bool stop_testing;
 static unsigned int loops = 1;

 static void preempt_printk_workfn(struct work_struct *work)
 {
  int i;

  while (!READ_ONCE(stop_testing)) {
  for (i = 0; i < loops && !READ_ONCE(stop_testing); i++) {
  preempt_disable();
  pr_emerg("%5d%-75s\n", smp_processor_id(),
   " XXX NOPREEMPT");
  preempt_enable();
  }
  msleep(1);
  }
 }

 static struct work_struct __percpu *works;

 static void finish(void)
 {
  int cpu;

  WRITE_ONCE(stop_testing, true);
  for_each_online_cpu(cpu)
  flush_work(per_cpu_ptr(works, cpu));
  free_percpu(works);
 }

 static int __init test_init(void)
 {
  int cpu;

  works = alloc_percpu(struct work_struct);
  if (!works)
  return -ENOMEM;

  /*
   * This is just a test module. This will break if you
   * do any CPU hot plugging between loading and
   * unloading the module.
   */

  for_each_online_cpu(cpu) {
  struct work_struct *work = per_cpu_ptr(works, cpu);

  INIT_WORK(work, &preempt_printk_workfn);
  schedule_work_on(cpu, work);
  }

  return 0;
 }

 static void __exit test_exit(void)
 {
  finish();
 }

 module_param(loops, uint, 0);
 module_init(test_init);
 module_exit(test_exit);
 MODULE_LICENSE("GPL");

Link: http://lkml.kernel.org/r/20180110132418.7080-2-pmladek@suse.com
Cc: akpm@linux-foundation.org
Cc: linux-mm@kvack.org
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[pmladek@suse.com: Commit message about possible deadlocks]
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "printk: Never set console_may_schedule in console_trylock()"

This reverts commit c9b8d580b3fb0ab65d37c372aef19a318fda3199.

This is just a technical revert to make the printk fix apply cleanly,
this patch will be re-picked in about 3 commits.

ocfs2: fix potential use after free

[ Upstream commit 164f7e586739d07eb56af6f6d66acebb11f315c8 ]

ocfs2_get_dentry() calls iput(inode) to drop the reference count of
inode, and if the reference count hits 0, inode is freed.  However, in
this function, it then reads inode->i_generation, which may result in a
use after free bug.  Move the put operation later.

Link: http://lkml.kernel.org/r/1543109237-110227-1-git-send-email-bianpan2016@163.com
Fixes: 781f200cb7a("ocfs2: Remove masklog ML_EXPORT.")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

debugobjects: avoid recursive calls with kmemleak

[ Upstream commit 8de456cf87ba863e028c4dd01bae44255ce3d835 ]

CONFIG_DEBUG_OBJECTS_RCU_HEAD does not play well with kmemleak due to
recursive calls.

fill_pool
  kmemleak_ignore
    make_black_object
      put_object
        __call_rcu (kernel/rcu/tree.c)
          debug_rcu_head_queue
            debug_object_activate
              debug_object_init
                fill_pool
                  kmemleak_ignore
                    make_black_object
                      ...

So add SLAB_NOLEAKTRACE to kmem_cache_create() to not register newly
allocated debug objects at all.

Link: http://lkml.kernel.org/r/20181126165343.2339-1-cai@gmx.us
Signed-off-by: Qian Cai <cai@gmx.us>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hfsplus: do not free node before using

[ Upstream commit c7d7d620dcbd2a1c595092280ca943f2fced7bbd ]

hfs_bmap_free() frees node via hfs_bnode_put(node).  However it then
reads node->this when dumping error message on an error path, which may
result in a use-after-free bug.  This patch frees node only when it is
never used.

Link: http://lkml.kernel.org/r/1543053441-66942-1-git-send-email-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hfs: do not free node before using

[ Upstream commit ce96a407adef126870b3f4a1b73529dd8aa80f49 ]

hfs_bmap_free() frees the node via hfs_bnode_put(node).  However, it
then reads node->this when dumping error message on an error path, which
may result in a use-after-free bug.  This patch frees the node only when
it is never again used.

Link: http://lkml.kernel.org/r/1542963889-128825-1-git-send-email-bianpan2016@163.com
Fixes: a1185ffa2fc ("HFS rewrite")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/page_alloc.c: fix calculation of pgdat->nr_zones

[ Upstream commit 8f416836c0d50b198cad1225132e5abebf8980dc ]

init_currently_empty_zone() will adjust pgdat->nr_zones and set it to
'zone_idx(zone) + 1' unconditionally.  This is correct in the normal
case, while not exact in hot-plug situation.

This function is used in two places:

  * free_area_init_core()
  * move_pfn_range_to_zone()

In the first case, we are sure zone index increase monotonically.  While
in the second one, this is under users control.

One way to reproduce this is:
----------------------------

1. create a virtual machine with empty node1

   -m 4G,slots=32,maxmem=32G \
   -smp 4,maxcpus=8          \
   -numa node,nodeid=0,mem=4G,cpus=0-3 \
   -numa node,nodeid=1,mem=0G,cpus=4-7

2. hot-add cpu 3-7

   cpu-add [3-7]

2. hot-add memory to nod1

   object_add memory-backend-ram,id=ram0,size=1G
   device_add pc-dimm,id=dimm0,memdev=ram0,node=1

3. online memory with following order

   echo online_movable > memory47/state
   echo online > memory40/state

After this, node1 will have its nr_zones equals to (ZONE_NORMAL + 1)
instead of (ZONE_MOVABLE + 1).

Michal said:
 "Having an incorrect nr_zones might result in all sorts of problems
  which would be quite hard to debug (e.g. reclaim not considering the
  movable zone). I do not expect many users would suffer from this it
  but still this is trivial and obviously right thing to do so
  backporting to the stable tree shouldn't be harmful (last famous
  words)"

Link: http://lkml.kernel.org/r/20181117022022.9956-1-richard.weiyang@gmail.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ocfs2: fix deadlock caused by ocfs2_defrag_extent()

[ Upstream commit e21e57445a64598b29a6f629688f9b9a39e7242a ]

ocfs2_defrag_extent may fall into deadlock.

ocfs2_ioctl_move_extents
    ocfs2_ioctl_move_extents
      ocfs2_move_extents
        ocfs2_defrag_extent
          ocfs2_lock_allocators_move_extents

            ocfs2_reserve_clusters
              inode_lock GLOBAL_BITMAP_SYSTEM_INODE

  __ocfs2_flush_truncate_log
              inode_lock GLOBAL_BITMAP_SYSTEM_INODE

As backtrace shows above, ocfs2_reserve_clusters() will call inode_lock
against the global bitmap if local allocator has not sufficient cluters.
Once global bitmap could meet the demand, ocfs2_reserve_cluster will
return success with global bitmap locked.

After ocfs2_reserve_cluster(), if truncate log is full,
__ocfs2_flush_truncate_log() will definitely fall into deadlock because
it needs to inode_lock global bitmap, which has already been locked.

To fix this bug, we could remove from
ocfs2_lock_allocators_move_extents() the code which intends to lock
global allocator, and put the removed code after
__ocfs2_flush_truncate_log().

ocfs2_lock_allocators_move_extents() is referred by 2 places, one is
here, the other does not need the data allocator context, which means
this patch does not affect the caller so far.

Link: http://lkml.kernel.org/r/20181101071422.14470-1-lchen@suse.com
Signed-off-by: Larry Chen <lchen@suse.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI/IORT: Fix iort_get_platform_device_domain() uninitialized pointer value

[ Upstream commit ea2412dc21cc790335d319181dddc43682aef164 ]

Running the Clang static analyzer on IORT code detected the following
error:

Logic error: Branch condition evaluates to a garbage value

in

iort_get_platform_device_domain()

If the named component associated with a given device has no IORT
mappings, iort_get_platform_device_domain() exits its MSI mapping loop
with msi_parent pointer containing garbage, which can lead to erroneous
code path execution.

Initialize the msi_parent pointer, fixing the bug.

Fixes: d4f54a186667 ("ACPI: platform: setup MSI domain for ACPI based
platform device")
Reported-by: Patrick Bellasi <patrick.bellasi@arm.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: flush namespace scanning work just before removing namespaces

[ Upstream commit f6c8e432cb0479255322c5d0335b9f1699a0270c ]

nvme_stop_ctrl can be called also for reset flow and there is no need to
flush the scan_work as namespaces are not being removed. This can cause
deadlock in rdma, fc and loop drivers since nvme_stop_ctrl barriers
before controller teardown (and specifically I/O cancellation of the
scan_work itself) takes place, but the scan_work will be blocked anyways
so there is no need to flush it.

Instead, move scan_work flush to nvme_remove_namespaces() where it really
needs to flush.

Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed by: James Smart <jsmart2021@gmail.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fscache, cachefiles: remove redundant variable 'cache'

[ Upstream commit 31ffa563833576bd49a8bf53120568312755e6e2 ]

Variable 'cache' is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'cache' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fscache: fix race between enablement and dropping of object

[ Upstream commit c5a94f434c82529afda290df3235e4d85873c5b4 ]

It was observed that a process blocked indefintely in
__fscache_read_or_alloc_page(), waiting for FSCACHE_COOKIE_LOOKING_UP
to be cleared via fscache_wait_for_deferred_lookup().

At this time, ->backing_objects was empty, which would normaly prevent
__fscache_read_or_alloc_page() from getting to the point of waiting.
This implies that ->backing_objects was cleared *after*
__fscache_read_or_alloc_page was was entered.

When an object is "killed" and then "dropped",
FSCACHE_COOKIE_LOOKING_UP is cleared in fscache_lookup_failure(), then
KILL_OBJECT and DROP_OBJECT are "called" and only in DROP_OBJECT is
->backing_objects cleared.  This leaves a window where
something else can set FSCACHE_COOKIE_LOOKING_UP and
__fscache_read_or_alloc_page() can start waiting, before
->backing_objects is cleared

There is some uncertainty in this analysis, but it seems to be fit the
observations.  Adding the wake in this patch will be handled correctly
by __fscache_read_or_alloc_page(), as it checks if ->backing_objects
is empty again, after waiting.

Customer which reported the hang, also report that the hang cannot be
reproduced with this fix.

The backtrace for the blocked process looked like:

PID: 29360  TASK: ffff881ff2ac0f80  CPU: 3   COMMAND: "zsh"
 #0 [ffff881ff43efbf8] schedule at ffffffff815e56f1
 #1 [ffff881ff43efc58] bit_wait at ffffffff815e64ed
 #2 [ffff881ff43efc68] __wait_on_bit at ffffffff815e61b8
 #3 [ffff881ff43efca0] out_of_line_wait_on_bit at ffffffff815e625e
 #4 [ffff881ff43efd08] fscache_wait_for_deferred_lookup at ffffffffa04f2e8f [fscache]
 #5 [ffff881ff43efd18] __fscache_read_or_alloc_page at ffffffffa04f2ffe [fscache]
 #6 [ffff881ff43efd58] __nfs_readpage_from_fscache at ffffffffa0679668 [nfs]
 #7 [ffff881ff43efd78] nfs_readpage at ffffffffa067092b [nfs]
 #8 [ffff881ff43efda0] generic_file_read_iter at ffffffff81187a73
 #9 [ffff881ff43efe50] nfs_file_read at ffffffffa066544b [nfs]
#10 [ffff881ff43efe70] __vfs_read at ffffffff811fc756
#11 [ffff881ff43efee8] vfs_read at ffffffff811fccfa
#12 [ffff881ff43eff18] sys_read at ffffffff811fda62
#13 [ffff881ff43eff50] entry_SYSCALL_64_fastpath at ffffffff815e986e

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pstore/ram: Correctly calculate usable PRZ bytes

[ Upstream commit 89d328f637b9904b6d4c9af73c8a608b8dd4d6f8 ]

The actual number of bytes stored in a PRZ is smaller than the
bytes requested by platform data, since there is a header on each
PRZ. Additionally, if ECC is enabled, there are trailing bytes used
as well. Normally this mismatch doesn't matter since PRZs are circular
buffers and the leading "overflow" bytes are just thrown away. However, in
the case of a compressed record, this rather badly corrupts the results.

This corruption was visible with "ramoops.mem_size=204800 ramoops.ecc=1".
Any stored crashes would not be uncompressable (producing a pstorefs
"dmesg-*.enc.z" file), and triggering errors at boot:

  [    2.790759] pstore: crypto_comp_decompress failed, ret = -22!

Backporting this depends on commit 70ad35db3321 ("pstore: Convert console
write to use ->write_buf")

Reported-by: Joel Fernandes <joel@joelfernandes.org>
Fixes: b0aad7a99c1d ("pstore: Add compression support to pstore")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "xen/balloon: Mark unallocated host memory as UNUSABLE"

[ Upstream commit 123664101aa2156d05251704fc63f9bcbf77741a ]

This reverts commit b3cf8528bb21febb650a7ecbf080d0647be40b9f.

That commit unintentionally broke Xen balloon memory hotplug with
"hotplug_unpopulated" set to 1. As long as "System RAM" resource
got assigned under a new "Unusable memory" resource in IO/Mem tree
any attempt to online this memory would fail due to general kernel
restrictions on having "System RAM" resources as 1st level only.

The original issue that commit has tried to workaround fa564ad96366
("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f,
60-7f)") also got amended by the following 03a551734 ("x86/PCI: Move
and shrink AMD 64-bit window to avoid conflict") which made the
original fix to Xen ballooning unnecessary.

Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen: xlate_mmu: add missing header to fix 'W=1' warning

[ Upstream commit 72791ac854fea36034fa7976b748fde585008e78 ]

Add a missing header otherwise compiler warns about missed prototype:

drivers/xen/xlate_mmu.c:183:5: warning: no previous prototype for 'xen_xlate_unmap_gfn_range?' [-Wmissing-prototypes]
  int xen_xlate_unmap_gfn_range(struct vm_area_struct *vma,
      ^~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Srikanth Boddepalli <boddepalli.srikanth@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/ast: fixed reading monitor EDID not stable issue

[ Upstream commit 300625620314194d9e6d4f6dda71f2dc9cf62d9f ]

v1: over-sample data to increase the stability with some specific monitors
v2: refine to avoid infinite loop
v3: remove un-necessary "volatile" declaration

[airlied: fix two checkpatch warnings]

Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1542858988-1127-1-git-send-email-yc_chen@aspeedtech.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Add delay after enable RLC ucode

[ Upstream commit ad97d9de45835b6a0f71983b0ae0cffd7306730a ]

Driver shouldn't try to access any GFX registers until RLC is idle.
During the test, it took 12 seconds for RLC to clear the BUSY bit
in RLC_GPM_STAT register which is un-acceptable for driver.
As per RLC engineer, it would take RLC Ucode less than 10,000 GFXCLK
cycles to finish its critical section. In a lowest 300M enginer clock
setting(default from vbios), 50 us delay is enough.

This commit fix the hang when RLC introduce the work around for XGMI
which requires more cycles to setup more registers than normal

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hisilicon: remove unexpected free_netdev

[ Upstream commit c758940158bf29fe14e9d0f89d5848f227b48134 ]

The net device ndev is freed via free_netdev when failing to register
the device. The control flow then jumps to the error handling code
block. ndev is used and freed again. Resulting in a use-after-free bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: recognize 1000BaseLX SFP modules as 1Gbps

[ Upstream commit a8bf879af7b1999eba36303ce9cc60e0e7dd816c ]

Add the two 1000BaseLX enum values to the X550's check for 1Gbps modules,
allowing the core driver code to establish a link over this SFP type.

This is done by the out-of-tree driver but the fix wasn't in mainline.

Fixes: e23f33367882 ("ixgbe: Fix 1G and 10G link stability for X550EM_x SFP+”)
Fixes: 6a14ee0cfb19 ("ixgbe: Add X550 support function pointers")
Signed-off-by: Josh Elsasser <jelsasser@appneta.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igb: fix uninitialized variables

[ Upstream commit e4c39f7926b4de355f7df75651d75003806aae09 ]

This patch fixes the variable 'phy_word' may be used uninitialized.

Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cachefiles: Fix page leak in cachefiles_read_backing_file while vmscan is active

[ Upstream commit 9a24ce5b66f9c8190d63b15f4473600db4935f1f ]

[Description]

In a heavily loaded system where the system pagecache is nearing memory
limits and fscache is enabled, pages can be leaked by fscache while trying
read pages from cachefiles backend.  This can happen because two
applications can be reading same page from a single mount, two threads can
be trying to read the backing page at same time.  This results in one of
the threads finding that a page for the backing file or netfs file is
already in the radix tree.  During the error handling cachefiles does not
clean up the reference on backing page, leading to page leak.

[Fix]
The fix is straightforward, to decrement the reference when error is
encountered.

  [dhowells: Note that I've removed the clearance and put of newpage as
   they aren't attested in the commit message and don't appear to actually
   achieve anything since a new page is only allocated is newpage!=NULL and
   any residual new page is cleared before returning.]

[Testing]
I have tested the fix using following method for 12+ hrs.

1) mkdir -p /mnt/nfs ; mount -o vers=3,fsc <server_ip>:/export /mnt/nfs
2) create 10000 files of 2.8MB in a NFS mount.
3) start a thread to simulate heavy VM presssure
   (while true ; do echo 3 > /proc/sys/vm/drop_caches ; sleep 1 ; done)&
4) start multiple parallel reader for data set at same time
   find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
   find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
   find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
   ..
   ..
   find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
   find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
5) finally check using cat /proc/fs/fscache/stats | grep -i pages ;
   free -h , cat /proc/meminfo and page-types -r -b lru
   to ensure all pages are freed.

Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Shantanu Goel <sgoel01@yahoo.com>
Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
[dja: forward ported to current upstream]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: deactivate expressions in rule replecement routine

[ Upstream commit ca08987885a147643817d02bf260bc4756ce8cd4 ]

There is no expression deactivation call from the rule replacement path,
hence, chain counter is not decremented. A few steps to reproduce the
problem:

   %nft add table ip filter
   %nft add chain ip filter c1
   %nft add chain ip filter c1
   %nft add rule ip filter c1 jump c2
   %nft replace rule ip filter c1 handle 3 accept
   %nft flush ruleset

<jump c2> expression means immediate NFT_JUMP to chain c2.
Reference count of chain c2 is increased when the rule is added.

When rule is deleted or replaced, the reference counter of c2 should be
decreased via nft_rule_expr_deactivate() which calls
nft_immediate_deactivate().

Splat looks like:
[  214.396453] WARNING: CPU: 1 PID: 21 at net/netfilter/nf_tables_api.c:1432 nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables]
[  214.398983] Modules linked in: nf_tables nfnetlink
[  214.398983] CPU: 1 PID: 21 Comm: kworker/1:1 Not tainted 4.20.0-rc2+ #44
[  214.398983] Workqueue: events nf_tables_trans_destroy_work [nf_tables]
[  214.398983] RIP: 0010:nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables]
[  214.398983] Code: 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 8e 00 00 00 48 8b 7b 58 e8 e1 2c 4e c6 48 89 df e8 d9 2c 4e c6 eb 9a <0f> 0b eb 96 0f 0b e9 7e fe ff ff e8 a7 7e 4e c6 e9 a4 fe ff ff e8
[  214.398983] RSP: 0018:ffff8881152874e8 EFLAGS: 00010202
[  214.398983] RAX: 0000000000000001 RBX: ffff88810ef9fc28 RCX: ffff8881152876f0
[  214.398983] RDX: dffffc0000000000 RSI: 1ffff11022a50ede RDI: ffff88810ef9fc78
[  214.398983] RBP: 1ffff11022a50e9d R08: 0000000080000000 R09: 0000000000000000
[  214.398983] R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff11022a50eba
[  214.398983] R13: ffff888114446e08 R14: ffff8881152876f0 R15: ffffed1022a50ed6
[  214.398983] FS:  0000000000000000(0000) GS:ffff888116400000(0000) knlGS:0000000000000000
[  214.398983] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  214.398983] CR2: 00007fab9bb5f868 CR3: 000000012aa16000 CR4: 00000000001006e0
[  214.398983] Call Trace:
[  214.398983]  ? nf_tables_table_destroy.isra.37+0x100/0x100 [nf_tables]
[  214.398983]  ? __kasan_slab_free+0x145/0x180
[  214.398983]  ? nf_tables_trans_destroy_work+0x439/0x830 [nf_tables]
[  214.398983]  ? kfree+0xdb/0x280
[  214.398983]  nf_tables_trans_destroy_work+0x5f5/0x830 [nf_tables]
[ ... ]

Fixes: bb7b40aecbf7 ("netfilter: nf_tables: bogus EBUSY in chain deletions")
Reported by: Christoph Anton Mitterer <calestyo@scientia.net>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914505
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201791
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: u_ether: fix unsafe list iteration

[ Upstream commit c9287fa657b3328b4549c0ab39ea7f197a3d6a50 ]

list_for_each_entry_safe() is not safe for deleting entries from the
list if the spin lock, which protects it, is released and reacquired during
the list iteration. Fix this issue by replacing this construction with
a simple check if list is empty and removing the first entry in each
iteration. This is almost equivalent to a revert of the commit mentioned in
the Fixes: tag.

This patch fixes following issue:
--->8---
Unable to handle kernel NULL pointer dereference at virtual address 00000104
pgd = (ptrval)
[00000104] *pgd=00000000
Internal error: Oops: 817 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1 PID: 84 Comm: kworker/1:1 Not tainted 4.20.0-rc2-next-20181114-00009-g8266b35ec404 #1061
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
Workqueue: events eth_work
PC is at rx_fill+0x60/0xac
LR is at _raw_spin_lock_irqsave+0x50/0x5c
pc : [<c065fee0>]    lr : [<c0a056b8>]    psr: 80000093
sp : ee7fbee8  ip : 00000100  fp : 00000000
r10: 006000c0  r9 : c10b0ab0  r8 : ee7eb5c0
r7 : ee7eb614  r6 : ee7eb5ec  r5 : 000000dc  r4 : ee12ac00
r3 : ee12ac24  r2 : 00000200  r1 : 60000013  r0 : ee7eb5ec
Flags: Nzcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: 6d5dc04a  DAC: 00000051
Process kworker/1:1 (pid: 84, stack limit = 0x(ptrval))
Stack: (0xee7fbee8 to 0xee7fc000)
...
[<c065fee0>] (rx_fill) from [<c0143b7c>] (process_one_work+0x200/0x738)
[<c0143b7c>] (process_one_work) from [<c0144118>] (worker_thread+0x2c/0x4c8)
[<c0144118>] (worker_thread) from [<c014a8a4>] (kthread+0x128/0x164)
[<c014a8a4>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
Exception stack(0xee7fbfb0 to 0xee7fbff8)
...
---[ end trace 64480bc835eba7d6 ]---

Fixes: fea14e68ff5e ("usb: gadget: u_ether: use better list accessors")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: thunderx: fix NULL pointer dereference in nic_remove

[ Upstream commit 24a6d2dd263bc910de018c78d1148b3e33b94512 ]

Fix a possible NULL pointer dereference in nic_remove routine
removing the nicpf module if nic_probe fails.
The issue can be triggered with the following reproducer:

$rmmod nicvf
$rmmod nicpf

[  521.412008] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000014
[  521.422777] Mem abort info:
[  521.425561]   ESR = 0x96000004
[  521.428624]   Exception class = DABT (current EL), IL = 32 bits
[  521.434535]   SET = 0, FnV = 0
[  521.437579]   EA = 0, S1PTW = 0
[  521.440730] Data abort info:
[  521.443603]   ISV = 0, ISS = 0x00000004
[  521.447431]   CM = 0, WnR = 0
[  521.450417] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000072a3da42
[  521.457022] [0000000000000014] pgd=0000000000000000
[  521.461916] Internal error: Oops: 96000004 [#1] SMP
[  521.511801] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018
[  521.518664] pstate: 80400005 (Nzcv daif +PAN -UAO)
[  521.523451] pc : nic_remove+0x24/0x88 [nicpf]
[  521.527808] lr : pci_device_remove+0x48/0xd8
[  521.532066] sp : ffff000013433cc0
[  521.535370] x29: ffff000013433cc0 x28: ffff810f6ac50000
[  521.540672] x27: 0000000000000000 x26: 0000000000000000
[  521.545974] x25: 0000000056000000 x24: 0000000000000015
[  521.551274] x23: ffff8007ff89a110 x22: ffff000001667070
[  521.556576] x21: ffff8007ffb170b0 x20: ffff8007ffb17000
[  521.561877] x19: 0000000000000000 x18: 0000000000000025
[  521.567178] x17: 0000000000000000 x16: 000000000000010ffc33ff98 x8 : 0000000000000000
[  521.593683] x7 : 0000000000000000 x6 : 0000000000000001
[  521.598983] x5 : 0000000000000002 x4 : 0000000000000003
[  521.604284] x3 : ffff8007ffb17184 x2 : ffff8007ffb17184
[  521.609585] x1 : ffff000001662118 x0 : ffff000008557be0
[  521.614887] Process rmmod (pid: 1897, stack limit = 0x00000000859535c3)
[  521.621490] Call trace:
[  521.623928]  nic_remove+0x24/0x88 [nicpf]
[  521.627927]  pci_device_remove+0x48/0xd8
[  521.631847]  device_release_driver_internal+0x1b0/0x248
[  521.637062]  driver_detach+0x50/0xc0
[  521.640628]  bus_remove_driver+0x60/0x100
[  521.644627]  driver_unregister+0x34/0x60
[  521.648538]  pci_unregister_driver+0x24/0xd8
[  521.652798]  nic_cleanup_module+0x14/0x111c [nicpf]
[  521.657672]  __arm64_sys_delete_module+0x150/0x218
[  521.662460]  el0_svc_handler+0x94/0x110
[  521.666287]  el0_svc+0x8/0xc
[  521.669160] Code: aa1e03e0 9102c295 d503201f f9404eb3 (b9401660)

Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/kvm/vmx: fix old-style function declaration

[ Upstream commit 1e4329ee2c52692ea42cc677fb2133519718b34a ]

The inline keyword which is not at the beginning of the function
declaration may trigger the following build warnings, so let's fix it:

arch/x86/kvm/vmx.c:1309:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:5947:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:5985:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:6023:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]

Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86: fix empty-body warnings

[ Upstream commit 354cb410d87314e2eda344feea84809e4261570a ]

We get the following warnings about empty statements when building
with 'W=1':

arch/x86/kvm/lapic.c:632:53: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1907:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1936:65: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1975:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]

Rework the debug helper macro to get rid of these warnings.

Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx5: Fix page fault handling for MW

[ Upstream commit 75b7b86bdb0df37e08e44b6c1f99010967f81944 ]

Memory windows are implemented with an indirect MKey, when a page fault
event comes for a MW Mkey we need to find the MR at the end of the list of
the indirect MKeys by iterating on all items from the first to the last.

The offset calculated during this process has to be zeroed after the first
iteration or the next iteration will start from a wrong address, resulting
incorrect ODP faulting behavior.

Fixes: db570d7deafb ("IB/mlx5: Add ODP support to MW")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipv6: Preserve link scope traffic original oif

[ Upstream commit 508b09046c0f21678652fb66fd1e9959d55591d2 ]

When ip6_route_me_harder is invoked, it resets outgoing interface of:
  - link-local scoped packets sent by neighbor discovery
  - multicast packets sent by MLD host
  - multicast packets send by MLD proxy daemon that sets outgoing
    interface through IPV6_PKTINFO ipi6_ifindex

Link-local and multicast packets must keep their original oif after
ip6_route_me_harder is called.

Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: add support for 1080p25 mode

[ Upstream commit 31e1ab494559fb46de304cc6c2aed1528f94b298 ]

This essential mode for PAL users is missing, so add it.

Fixes: 335e3713afb87 ("drm/meson: Add support for HDMI venc modes and settings")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1542793169-13008-1-git-send-email-christianshewitt@gmail.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: omap_udc: fix rejection of out transfers when DMA is used

[ Upstream commit 069caf5950dfa75d0526cd89c439ff9d9d3136d8 ]

Commit 387f869d2579 ("usb: gadget: u_ether: conditionally align
transfer size") started aligning transfer size only if requested,
breaking omap_udc DMA mode. Set quirk_ep_out_aligned_size to restore
the old behaviour.

Fixes: 387f869d2579 ("usb: gadget: u_ether: conditionally align transfer size")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: omap_udc: fix USB gadget functionality on Palm Tungsten E

[ Upstream commit 2c2322fbcab8102b8cadc09d66714700a2da42c2 ]

On Palm TE nothing happens when you try to use gadget drivers and plug
the USB cable. Fix by adding the board to the vbus sense quirk list.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: omap_udc: fix omap_udc_start() on 15xx machines

[ Upstream commit 6ca6695f576b8453fe68865e84d25946d63b10ad ]

On OMAP 15xx machines there are no transceivers, and omap_udc_start()
always fails as it forgot to adjust the default return value.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: omap_udc: fix crashes on probe error and module removal

[ Upstream commit 99f700366fcea1aa2fa3c49c99f371670c3c62f8 ]

We currently crash if usb_add_gadget_udc_release() fails, since the
udc->done is not initialized until in the remove function.
Furthermore, on module removal the udc data is accessed although
the release function is already triggered by usb_del_gadget_udc()
early in the function.

Fix by rewriting the release and remove functions, basically moving
all the cleanup into the release function, and doing the completion
only in the module removal case.

The patch fixes omap_udc module probe with a failing gadged, and also
allows the removal of omap_udc. Tested by running "modprobe omap_udc;
modprobe -r omap_udc" in a loop.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: omap_udc: use devm_request_irq()

[ Upstream commit 286afdde1640d8ea8916a0f05e811441fbbf4b9d ]

The current code fails to release the third irq on the error path
(observed by reading the code), and we get also multiple WARNs with
failing gadget drivers due to duplicate IRQ releases. Fix by using
devm_request_irq().

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipvs: call ip_vs_dst_notifier earlier than ipv6_dev_notf

[ Upstream commit 2a31e4bd9ad255ee40809b5c798c4b1c2b09703b ]

ip_vs_dst_event is supposed to clean up all dst used in ipvs'
destinations when a net dev is going down. But it works only
when the dst's dev is the same as the dev from the event.

Now with the same priority but late registration,
ip_vs_dst_notifier is always called later than ipv6_dev_notf
where the dst's dev is set to lo for NETDEV_DOWN event.

As the dst's dev lo is not the same as the dev from the event
in ip_vs_dst_event, ip_vs_dst_notifier doesn't actually work.
Also as these dst have to wait for dest_trash_timer to clean
them up. It would cause some non-permanent kernel warnings:

  unregister_netdevice: waiting for br0 to become free. Usage count = 3

To fix it, call ip_vs_dst_notifier earlier than ipv6_dev_notf
by increasing its priority to ADDRCONF_NOTIFY_PRIORITY + 5.

Note that for ipv4 route fib_netdev_notifier doesn't set dst's
dev to lo in NETDEV_DOWN event, so this fix is only needed when
IP_VS_IPV6 is defined.

Fixes: 7a4f0761fce3 ("IPVS: init and cleanup restructuring")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: fix check of allowed specifiers in bpf_trace_printk

[ Upstream commit 1efb6ee3edea57f57f9fb05dba8dcb3f7333f61f ]

A format string consisting of "%p" or "%s" followed by an invalid
specifier (e.g. "%p%\n" or "%s%") could pass the check which
would make format_decode (lib/vsprintf.c) to warn.

Fixes: 9c959c863f82 ("tracing: Allow BPF programs to call bpf_trace_printk()")
Reported-by: syzbot+1ec5c5ec949c4adaa0c4@syzkaller.appspotmail.com
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

exportfs: do not read dentry after free

[ Upstream commit 2084ac6c505a58f7efdec13eba633c6aaa085ca5 ]

The function dentry_connected calls dput(dentry) to drop the previously
acquired reference to dentry. In this case, dentry can be released.
After that, IS_ROOT(dentry) checks the condition
(dentry == dentry->d_parent), which may result in a use-after-free bug.
This patch directly compares dentry with its parent obtained before
dropping the reference.

Fixes: a056cc8934c("exportfs: stop retrying once we race with
rename/remove")

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: omap-dmic: Add pm_qos handling to avoid overruns with CPU_IDLE

[ Upstream commit ffdcc3638c58d55a6fa68b6e5dfd4fb4109652eb ]

We need to block sleep states which would require longer time to leave than
the time the DMA must react to the DMA request in order to keep the FIFO
serviced without overrun.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: omap-mcpdm: Add pm_qos handling to avoid under/overruns with CPU_IDLE

[ Upstream commit 373a500e34aea97971c9d71e45edad458d3da98f ]

We need to block sleep states which would require longer time to leave than
the time the DMA must react to the DMA request in order to keep the FIFO
serviced without under of overrun.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: omap-mcbsp: Fix latency value calculation for pm_qos

[ Upstream commit dd2f52d8991af9fe0928d59ec502ba52be7bc38d ]

The latency number is in usec for the pm_qos. Correct the calculation to
give us the time in usec

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rdmavt: Fix rvt_create_ah function signature

[ Upstream commit 4f32fb921b153ae9ea280e02a3e91509fffc03d3 ]

rdmavt uses a crazy system that looses the type checking when assinging
functions to struct ib_device function pointers. Because of this the
signature to this function was not changed when the below commit revised
things.

Fix the signature so we are not calling a function pointer with a
mismatched signature.

Fixes: 477864c8fcd9 ("IB/core: Let create_ah return extended response to user")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx5: Fix fence type for IB_WR_LOCAL_INV WR

[ Upstream commit 074fca3a18e7e1e0d4d7dcc9d7badc43b90232f4 ]

Currently, for IB_WR_LOCAL_INV WR, when the next fence is None, the
current fence will be SMALL instead of Normal Fence.

Without this patch krping doesn't work on CX-5 devices and throws
following error:

The error messages are from CX5 driver are: (from server side)
[ 710.434014] mlx5_0:dump_cqe:278:(pid 2712): dump error cqe
[ 710.434016] 00000000 00000000 00000000 00000000
[ 710.434016] 00000000 00000000 00000000 00000000
[ 710.434017] 00000000 00000000 00000000 00000000
[ 710.434018] 00000000 93003204 100000b8 000524d2
[ 710.434019] krping: cq completion failed with wr_id 0 status 4 opcode 128 vender_err 32

Fixed the logic to set the correct fence type.

Fixes: 6e8484c5cf07 ("RDMA/mlx5: set UMR wqe fence according to HCA cap")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Btrfs: send, fix infinite loop due to directory rename dependencies

[ Upstream commit a4390aee72713d9e73f1132bcdeb17d72fbbf974 ]

When doing an incremental send, due to the need of delaying directory move
(rename) operations we can end up in infinite loop at
apply_children_dir_moves().

An example scenario that triggers this problem is described below, where
directory names correspond to the numbers of their respective inodes.

Parent snapshot:

 .
 |--- 261/
       |--- 271/
             |--- 266/
                   |--- 259/
                   |--- 260/
                   |     |--- 267
                   |
                   |--- 264/
                   |     |--- 258/
                   |           |--- 257/
                   |
                   |--- 265/
                   |--- 268/
                   |--- 269/
                   |     |--- 262/
                   |
                   |--- 270/
                   |--- 272/
                   |     |--- 263/
                   |     |--- 275/
                   |
                   |--- 274/
                         |--- 273/

Send snapshot:

 .
 |-- 275/
      |-- 274/
           |-- 273/
                |-- 262/
                     |-- 269/
                          |-- 258/
                               |-- 271/
                                    |-- 268/
                                         |-- 267/
                                              |-- 270/
                                                   |-- 259/
                                                   |    |-- 265/
                                                   |
                                                   |-- 272/
                                                        |-- 257/
                                                             |-- 260/
                                                             |-- 264/
                                                                  |-- 263/
                                                                       |-- 261/
                                                                            |-- 266/

When processing inode 257 we delay its move (rename) operation because its
new parent in the send snapshot, inode 272, was not yet processed. Then
when processing inode 272, we delay the move operation for that inode
because inode 274 is its ancestor in the send snapshot. Finally we delay
the move operation for inode 274 when processing it because inode 275 is
its new parent in the send snapshot and was not yet moved.

When finishing processing inode 275, we start to do the move operations
that were previously delayed (at apply_children_dir_moves()), resulting in
the following iterations:

1) We issue the move operation for inode 274;

2) Because inode 262 depended on the move operation of inode 274 (it was
   delayed because 274 is its ancestor in the send snapshot), we issue the
   move operation for inode 262;

3) We issue the move operation for inode 272, because it was delayed by
   inode 274 too (ancestor of 272 in the send snapshot);

4) We issue the move operation for inode 269 (it was delayed by 262);

5) We issue the move operation for inode 257 (it was delayed by 272);

6) We issue the move operation for inode 260 (it was delayed by 272);

7) We issue the move operation for inode 258 (it was delayed by 269);

8) We issue the move operation for inode 264 (it was delayed by 257);

9) We issue the move operation for inode 271 (it was delayed by 258);

10) We issue the move operation for inode 263 (it was delayed by 264);

11) We issue the move operation for inode 268 (it was delayed by 271);

12) We verify if we can issue the move operation for inode 270 (it was
    delayed by 271). We detect a path loop in the current state, because
    inode 267 needs to be moved first before we can issue the move
    operation for inode 270. So we delay again the move operation for
    inode 270, this time we will attempt to do it after inode 267 is
    moved;

13) We issue the move operation for inode 261 (it was delayed by 263);

14) We verify if we can issue the move operation for inode 266 (it was
    delayed by 263). We detect a path loop in the current state, because
    inode 270 needs to be moved first before we can issue the move
    operation for inode 266. So we delay again the move operation for
    inode 266, this time we will attempt to do it after inode 270 is
    moved (its move operation was delayed in step 12);

15) We issue the move operation for inode 267 (it was delayed by 268);

16) We verify if we can issue the move operation for inode 266 (it was
    delayed by 270). We detect a path loop in the current state, because
    inode 270 needs to be moved first before we can issue the move
    operation for inode 266. So we delay again the move operation for
    inode 266, this time we will attempt to do it after inode 270 is
    moved (its move operation was delayed in step 12). So here we added
    again the same delayed move operation that we added in step 14;

17) We attempt again to see if we can issue the move operation for inode
    266, and as in step 16, we realize we can not due to a path loop in
    the current state due to a dependency on inode 270. Again we delay
    inode's 266 rename to happen after inode's 270 move operation, adding
    the same dependency to the empty stack that we did in steps 14 and 16.
    The next iteration will pick the same move dependency on the stack
    (the only entry) and realize again there is still a path loop and then
    again the same dependency to the stack, over and over, resulting in
    an infinite loop.

So fix this by preventing adding the same move dependency entries to the
stack by removing each pending move record from the red black tree of
pending moves. This way the next call to get_pending_dir_moves() will
not return anything for the current parent inode.

A test case for fstests, with this reproducer, follows soon.

Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[Wrote changelog with example and more clear explanation]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: at91: sama5d2: use the divided clock for SMC

[ Upstream commit 4ab7ca092c3c7ac8b16aa28eba723a8868f82f14 ]

The SAMA5D2 is different from SAMA5D3 and SAMA5D4, as there are two
different clocks for the peripherals in the SoC. The Static Memory
controller is connected to the divided master clock.

Unfortunately, the device tree does not correctly show this and uses the
master clock directly. This clock is then used by the code for the NAND
controller to calculate the timings for the controller, and we end up with
slow NAND Flash access.

Fix the device tree, and the performance of Flash access is improved.

Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

objtool: Fix segfault in .cold detection with -ffunction-sections

[ Upstream commit 22566c1603030f0a036ad564634b064ad1a55db2 ]

Because find_symbol_by_name() traverses the same lists as
read_symbols(), changing sym->name in place without copying it affects
the result of find_symbol_by_name().  In the case where a ".cold"
function precedes its parent in sec->symbol_list, it can result in a
function being considered a parent of itself. This leads to function
length being set to 0 and other consequent side-effects including a
segfault in add_switch_table().  The effects of this bug are only
visible when building with -ffunction-sections in KCFLAGS.

Fix by copying the search string instead of modifying it in place.

Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Link: http://lkml.kernel.org/r/910abd6b5a4945130fd44f787c24e07b9e07c8da.1542736240.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

objtool: Fix double-free in .cold detection error path

[ Upstream commit 0b9301fb632f7111a3293a30cc5b20f1b82ed08d ]

If read_symbols() fails during second list traversal (the one dealing
with ".cold" subfunctions) it frees the symbol, but never deletes it
from the list/hash_table resulting in symbol being freed again in
elf_close(). Fix it by just returning an error, leaving cleanup to
elf_close().

Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Link: http://lkml.kernel.org/r/beac5a9b7da9e8be90223459dcbe07766ae437dd.1542736240.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: imx6: Fix link training status detection in link up check

[ Upstream commit 68bc10bf992180f269816ff3d22eb30383138577 ]

This bug was introduced in the interaction for two commits on either
branch of the merge commit 562df5c8521e ("Merge branch
'pci/host-designware' into next").

Commit 4d107d3b5a68 ("PCI: imx6: Move link up check into
imx6_pcie_wait_for_link()"), changed imx6_pcie_wait_for_link() to poll
the link status register directly, checking for link up and not
training, and made imx6_pcie_link_up() only check the link up bit (once,
not a polling loop).

While commit 886bc5ceb5cc ("PCI: designware: Add generic
dw_pcie_wait_for_link()"), replaced the loop in
imx6_pcie_wait_for_link() with a call to a new dwc core function, which
polled imx6_pcie_link_up(), which still checked both link up and not
training in a loop.

When these two commits were merged, the version of
imx6_pcie_wait_for_link() from 886bc5ceb5cc was kept, which eliminated
the link training check placed there by 4d107d3b5a68. However, the
version of imx6_pcie_link_up() from 4d107d3b5a68 was kept, which
eliminated the link training check that had been there and was moved to
imx6_pcie_wait_for_link().

The result was the link training check got lost for the imx6 driver.

Eliminate imx6_pcie_link_up() so that the default handler,
dw_pcie_link_up(), is used instead. The default handler has the correct
code, which checks for link up and also that it still is not training,
fixing the regression.

Fixes: 562df5c8521e ("Merge branch 'pci/host-designware' into next")
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Restore proper cwd on return from mnt namespace

[ Upstream commit b01c1f69c8660eaeab7d365cd570103c5c073a02 ]

When reporting on 'record' server we try to retrieve/use the mnt
namespace of the profiled tasks. We use following API with cookie to
hold the return namespace, roughly:

  nsinfo__mountns_enter(struct nsinfo *nsi, struct nscookie *nc)
    setns(newns, 0);
  ...
  new ns related open..
  ...
  nsinfo__mountns_exit(struct nscookie *nc)
    setns(nc->oldns)

Once finished we setns to old namespace, which also sets the current
working directory (cwd) to "/", trashing the cwd we had.

This is mostly fine, because we use absolute paths almost everywhere,
but it screws up 'perf diff':

  # perf diff
  failed to open perf.data: No such file or directory  (try 'perf record' first)
  ...

Adding the current working directory to be part of the cookie and
restoring it in the nsinfo__mountns_exit call.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 843ff37bb59e ("perf symbols: Find symbols in different mount namespace")
Link: http://lkml.kernel.org/r/20181101170001.30019-1-jolsa@kernel.org
[ No need to check for NULL args for free(), use zfree() for struct members ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (w83795) temp4_type has writable permission

[ Upstream commit 09aaf6813cfca4c18034fda7a43e68763f34abb1 ]

Both datasheet and comments of store_temp_mode() tell us that temp1~4_type
is writable, so fix it.

Signed-off-by: Yao Wang <wangyao@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Fixes: 39deb6993e7c (" hwmon: (w83795) Simplify temperature sensor type handling")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: xt_hashlimit: fix a possible memory leak in htable_create()

[ Upstream commit b4e955e9f372035361fbc6f07b21fe2cc6a5be4a ]

In the htable_create(), hinfo is allocated by vmalloc()
So that if error occurred, hinfo should be freed.

Fixes: 11d5f15723c9 ("netfilter: xt_hashlimit: Create revision 2 to support higher pps rates")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers

[ Upstream commit 0145b50566e7de5637e80ecba96c7f0e6fff1aad ]

Before this commit sensor_hub_input_attr_get_raw_value() failed to take
the signedness of 16 and 8 bit values into account, returning e.g.
65436 instead of -100 for the z-axis reading of an accelerometer.

This commit adds a new is_signed parameter to the function and makes all
callers pass the appropriate value for this.

While at it, this commit also fixes up some neighboring lines where
statements were needlessly split over 2 lines to improve readability.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: dapm: Recalculate audio map forcely when card instantiated

[ Upstream commit 882eab6c28d23a970ae73b7eb831b169a672d456 ]

Audio map are possible in wrong state before card->instantiated has
been set to true.  Imaging the following examples:

time 1: at the beginning

  in:-1    in:-1    in:-1    in:-1
 out:-1   out:-1   out:-1   out:-1
 SIGGEN        A        B      Spk

time 2: after someone called snd_soc_dapm_new_widgets()
(e.g. create_fill_widget_route_map() in sound/soc/codecs/hdac_hdmi.c)

   in:1     in:0     in:0     in:0
  out:0    out:0    out:0    out:1
 SIGGEN        A        B      Spk

time 3: routes added

   in:1     in:0     in:0     in:0
  out:0    out:0    out:0    out:1
 SIGGEN -----> A -----> B ---> Spk

In the end, the path should be powered on but it did not.  At time 3,
"in" of SIGGEN and "out" of Spk did not propagate to their neighbors
because snd_soc_dapm_add_path() will not invalidate the paths if
the card has not instantiated (i.e. card->instantiated is false).
To correct the state of audio map, recalculate the whole map forcely.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: omap-abe-twl6040: Fix missing audio card caused by deferred probing

[ Upstream commit 76836fd354922ebe4798a64fda01f8dc6a8b0984 ]

The machine driver fails to probe in next-20181113 with:

[    2.539093] omap-abe-twl6040 sound: ASoC: CODEC DAI twl6040-legacy not registered
[    2.546630] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -517
...
[    3.693206] omap-abe-twl6040 sound: ASoC: Both platform name/of_node are set for TWL6040
[    3.701446] omap-abe-twl6040 sound: ASoC: failed to init link TWL6040
[    3.708007] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -22
[    3.715148] omap-abe-twl6040: probe of sound failed with error -22

Bisect pointed to a merge commit:
first bad commit: [0f688ab20a540aafa984c5dbd68a71debebf4d7f] Merge remote-tracking branch 'net-next/master'

and a diff between a working kernel does not reveal anything which would
explain the change in behavior.

Further investigation showed that on the second try of loading fails
because the dai_link->platform is no longer NULL and it might be pointing
to uninitialized memory.

The fix is to move the snd_soc_dai_link and snd_soc_card inside of the
abe_twl6040 struct, which is dynamically allocated every time the driver
probes.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (ina2xx) Fix current value calculation

[ Upstream commit 38cd989ee38c16388cde89db5b734f9d55b905f9 ]

The current register (04h) has a sign bit at MSB. The comments
for this calculation also mention that it's a signed register.

However, the regval is unsigned type so result of calculation
turns out to be an incorrect value when current is negative.

This patch simply fixes this by adding a casting to s16.

Fixes: 5d389b125186c ("hwmon: (ina2xx) Make calibration register value fixed")
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cpum_cf: Reject request for sampling in event initialization

[ Upstream commit 613a41b0d16e617f46776a93b975a1eeea96417c ]

On s390 command perf top fails
[root@s35lp76 perf] # ./perf top -F100000  --stdio
   Error:
   cycles: PMU Hardware doesn't support sampling/overflow-interrupts.
    Try 'perf stat'
[root@s35lp76 perf] #

Using event -e rb0000 works as designed.  Event rb0000 is the event
number of the sampling facility for basic sampling.

During system start up the following PMUs are installed in the kernel's
PMU list (from head to tail):
   cpum_cf --> s390 PMU counter facility device driver
   cpum_sf --> s390 PMU sampling facility device driver
   uprobe
   kprobe
   tracepoint
   task_clock
   cpu_clock

Perf top executes following functions and calls perf_event_open(2) system
call with different parameters many times:

cmd_top
--> __cmd_top
    --> perf_evlist__add_default
        --> __perf_evlist__add_default
            --> perf_evlist__new_cycles (creates event type:0 (HW)
     config 0 (CPU_CYCLES)
        --> perf_event_attr__set_max_precise_ip
    Uses perf_event_open(2) to detect correct
    precise_ip level. Fails 3 times on s390 which is ok.

Then functions cmd_top
--> __cmd_top
    --> perf_top__start_counters
        -->perf_evlist__config
   --> perf_can_comm_exec
               --> perf_probe_api
           This functions test support for the following events:
   "cycles:u", "instructions:u", "cpu-clock:u" using
   --> perf_do_probe_api
       --> perf_event_open_cloexec
           Test the close on exec flag support with
   perf_event_open(2).
               perf_do_probe_api returns true if the event is
       supported.
       The function returns true because event cpu-clock is
       supported by the PMU cpu_clock.
               This is achieved by many calls to perf_event_open(2).

Function perf_top__start_counters now calls perf_evsel__open() for every
event, which is the default event cpu_cycles (config:0) and type HARDWARE
(type:0) which a predfined frequence of 4000.

Given the above order of the PMU list, the PMU cpum_cf gets called first
and returns 0, which indicates support for this sampling. The event is
fully allocated in the function perf_event_open (file kernel/event/core.c
near line 10521 and the following check fails:

        event = perf_event_alloc(&attr, cpu, task, group_leader, NULL,
                 NULL, NULL, cgroup_fd);
if (IS_ERR(event)) {
err = PTR_ERR(event);
goto err_cred;
}

        if (is_sampling_event(event)) {
if (event->pmu->capabilities & PERF_PMU_CAP_NO_INTERRUPT) {
err = -EOPNOTSUPP;
goto err_alloc;
}
}

The check for the interrupt capabilities fails and the system call
perf_event_open() returns -EOPNOTSUPP (-95).

Add a check to return -ENODEV when sampling is requested in PMU cpum_cf.
This allows common kernel code in the perf_event_open() system call to
test the next PMU in above list.

Fixes: 97b1198fece0 (" "s390, perf: Use common PMU interrupt disabled code")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wm_adsp: Fix dma-unsafe read of scratch registers

[ Upstream commit 20e00db2f59bdddf8a8e241473ef8be94631d3ae ]

Stack memory isn't DMA-safe so it isn't safe to use either
regmap_raw_read or regmap_bulk_read to read into stack memory.

The two functions to read the scratch registers were using
stack memory and regmap_raw_read. It's not worth allocating
memory just for this trivial read, and it isn't time-critical.
A simple regmap_read for each register is sufficient.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon (ina2xx) Fix NULL id pointer in probe()

[ Upstream commit 70df9ebbd82c794ddfbb49d45b337f18d5588dc2 ]

When using DT configurations, the id pointer might turn out to
be NULL. Then the driver encounters NULL pointer access:

  Unable to handle kernel read from unreadable memory at vaddr 00000018
  [...]
  PC is at ina2xx_probe+0x114/0x200
  LR is at ina2xx_probe+0x10c/0x200
  [...]
  Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

The reason is that i2c core returns the id pointer by matching
id_table with client->name, while the client->name is actually
using the name from the first string in the DT compatible list,
not the best one. So i2c core would fail to match the id_table
if the best matched compatible string isn't the first one, and
then would return a NULL id pointer.

This probably should be fixed in i2c core. But it doesn't hurt
to make the driver robust. So this patch fixes it by using the
"chip" that's added to unify both DT and non-DT configurations.

Additionally, since id pointer could be null, so as id->name:
  ina2xx 10-0047: power monitor (null) (Rshunt = 1000 uOhm)
  ina2xx 10-0048: power monitor (null) (Rshunt = 10000 uOhm)

So this patch also fixes NULL name pointer, using client->name
to play safe and to align with hwmon->name.

Fixes: bd0ddd4d0883 ("hwmon: (ina2xx) Add OF device ID table")
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: fix use-after-free when deleting compat expressions

[ Upstream commit 29e3880109e357fdc607b4393f8308cef6af9413 ]

nft_compat ops do not have static storage duration, unlike all other
expressions.

When nf_tables_expr_destroy() returns, expr->ops might have been
free'd already, so we need to store next address before calling
expression destructor.

For same reason, we can't deref match pointer after nft_xt_put().

This can be easily reproduced by adding msleep() before
nft_match_destroy() returns.

Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: add script to stress-test nft packet path vs. control plane

[ Upstream commit 25d8bcedbf4329895dbaf9dd67baa6f18dad918c ]

Start flood ping for each cpu while loading/flushing rulesets to make
sure we do not access already-free'd rules from nf_tables evaluation loop.

Also add this to TARGETS so 'make run_tests' in selftest dir runs it
automatically.

This would have caught the bug fixed in previous change
("netfilter: nf_tables: do not skip inactive chains during generation update")
sooner.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sysv: return 'err' instead of 0 in __sysv_write_inode

[ Upstream commit c4b7d1ba7d263b74bb72e9325262a67139605cde ]

Fixes gcc '-Wunused-but-set-variable' warning:

fs/sysv/inode.c: In function '__sysv_write_inode':
fs/sysv/inode.c:239:6: warning:
 variable 'err' set but not used [-Wunused-but-set-variable]

__sysv_write_inode should return 'err' instead of 0

Fixes: 05459ca81ac3 ("repair sysv_write_inode(), switch sysv to simple_fsync()")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP1: ams-delta: Fix possible use of uninitialized field

[ Upstream commit cec83ff1241ec98113a19385ea9e9cfa9aa4125b ]

While playing with initialization order of modem device, it has been
discovered that under some circumstances (early console init, I
believe) its .pm() callback may be called before the
uart_port->private_data pointer is initialized from
plat_serial8250_port->private_data, resulting in NULL pointer
dereference.  Fix it by checking for uninitialized pointer before using
it in modem_pm().

Fixes: aabf31737a6a ("ARM: OMAP1: ams-delta: update the modem to use regulator API")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: logicpd-somlv: Fix interrupt on mmc3_dat1

[ Upstream commit 3d8b804bc528d3720ec0c39c212af92dafaf6e84 ]

The interrupt on mmc3_dat1 is wrong which prevents this from
appearing in /proc/interrupts.

Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD
DM3730 SOM-LV") #Kernel 4.9+

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8723bs: Fix the return value in case of error in 'rtw_wx_read32()'

[ Upstream commit c3e43d8b958bd6849817393483e805d8638a8ab7 ]

We return 0 unconditionally in 'rtw_wx_read32()'.
However, 'ret' is set to some error codes in several error handling paths.

Return 'ret' instead to propagate the error code.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rsnd: fixup clock start checker

[ Upstream commit 3ee9a76a8c5a10e1bfb04b81db767c6d562ddaf3 ]

commit 4d230d12710646 ("ASoC: rsnd: fixup not to call clk_get/set under
non-atomic") fixuped clock start timing. But it exchanged clock start
checker from ssi->usrcnt to ssi->rate.

Current rsnd_ssi_master_clk_start() is called from .prepare,
but some player (for example GStreamer) might calls it many times.
In such case, the checker might returns error even though it was not
error. It should check ssi->usrcnt instead of ssi->rate.
This patch fixup it. Without this patch, GStreamer can't switch
48kHz / 44.1kHz.

Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP2+: prm44xx: Fix section annotation on omap44xx_prm_enable_io_wakeup

[ Upstream commit eef3dc34a1e0b01d53328b88c25237bcc7323777 ]

When building the kernel with Clang, the following section mismatch
warning appears:

WARNING: vmlinux.o(.text+0x38b3c): Section mismatch in reference from
the function omap44xx_prm_late_init() to the function
.init.text:omap44xx_prm_enable_io_wakeup()
The function omap44xx_prm_late_init() references
the function __init omap44xx_prm_enable_io_wakeup().
This is often because omap44xx_prm_late_init lacks a __init
annotation or the annotation of omap44xx_prm_enable_io_wakeup is wrong.

Remove the __init annotation from omap44xx_prm_enable_io_wakeup so there
is no more mismatch.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio-net: keep vnet header zeroed after processing XDP

[ Upstream commit 436c9453a1ac0944b82870ef2e0d9be956b396d9 ]

We copy vnet header unconditionally in page_to_skb() this is wrong
since XDP may modify the packet data. So let's keep a zeroed vnet
header for not confusing the conversion between vnet header and skb
metadata.

In the future, we should able to detect whether or not the packet was
modified and keep using the vnet header when packet was not touched.

Fixes: f600b6905015 ("virtio_net: Add XDP support")
Reported-by: Pavel Popa <pashinho1990@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tun: forbid iface creation with rtnl ops

[ Upstream commit 35b827b6d06199841a83839e8bb69c0cd13a28be ]

It's not supported right now (the goal of the initial patch was to support
'ip link del' only).

Before the patch:
$ ip link add foo type tun
[  239.632660] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[snip]
[  239.636410] RIP: 0010:register_netdevice+0x8e/0x3a0

This panic occurs because dev->netdev_ops is not set by tun_setup(). But to
have something usable, it will require more than just setting
netdev_ops.

Fixes: f019a7a594d9 ("tun: Implement ip link del tunXXX")
CC: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix NULL ref in tail loss probe

[ Upstream commit b2b7af861122a0c0f6260155c29a1b2e594cd5b5 ]

TCP loss probe timer may fire when the retranmission queue is empty but
has a non-zero tp->packets_out counter. tcp_send_loss_probe will call
tcp_rearm_rto which triggers NULL pointer reference by fetching the
retranmission queue head in its sub-routines.

Add a more detailed warning to help catch the root cause of the inflight
accounting inconsistency.

Reported-by: Rafael Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: Do not underestimate rwnd_limited

[ Upstream commit 41727549de3e7281feb174d568c6e46823db8684 ]

If available rwnd is too small, tcp_tso_should_defer()
can decide it is worth waiting before splitting a TSO packet.

This really means we are rwnd limited.

Fixes: 5615f88614a4 ("tcp: instrument how long TCP is limited by receive window")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: kfree_rcu asoc

[ Upstream commit fb6df5a6234c38a9c551559506a49a677ac6f07a ]

In sctp_hash_transport/sctp_epaddr_lookup_transport, it dereferences
a transport's asoc under rcu_read_lock while asoc is freed not after
a grace period, which leads to a use-after-free panic.

This patch fixes it by calling kfree_rcu to make asoc be freed after
a grace period.

Note that only the asoc's memory is delayed to free in the patch, it
won't cause sk to linger longer.

Thanks Neil and Marcelo to make this clear.

Fixes: 7fda702f9315 ("sctp: use new rhlist interface on sctp transport rhashtable")
Fixes: cd2b70875058 ("sctp: check duplicate node before inserting a new transport")
Reported-by: syzbot+0b05d8aa7cb185107483@syzkaller.appspotmail.com
Reported-by: syzbot+aad231d51b1923158444@syzkaller.appspotmail.com
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtnetlink: ndo_dflt_fdb_dump() only work for ARPHRD_ETHER devices

[ Upstream commit 688838934c231bb08f46db687e57f6d8bf82709c ]

kmsan was able to trigger a kernel-infoleak using a gre device [1]

nlmsg_populate_fdb_fill() has a hard coded assumption
that dev->addr_len is ETH_ALEN, as normally guaranteed
for ARPHRD_ETHER devices.

A similar issue was fixed recently in commit da71577545a5
("rtnetlink: Disallow FDB configuration for non-Ethernet device")

[1]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:143 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x4c0/0x2700 lib/iov_iter.c:576
CPU: 0 PID: 6697 Comm: syz-executor310 Not tainted 4.20.0-rc3+ #95
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x32d/0x480 lib/dump_stack.c:113
 kmsan_report+0x12c/0x290 mm/kmsan/kmsan.c:683
 kmsan_internal_check_memory+0x32a/0xa50 mm/kmsan/kmsan.c:743
 kmsan_copy_to_user+0x78/0xd0 mm/kmsan/kmsan_hooks.c:634
 copyout lib/iov_iter.c:143 [inline]
 _copy_to_iter+0x4c0/0x2700 lib/iov_iter.c:576
 copy_to_iter include/linux/uio.h:143 [inline]
 skb_copy_datagram_iter+0x4e2/0x1070 net/core/datagram.c:431
 skb_copy_datagram_msg include/linux/skbuff.h:3316 [inline]
 netlink_recvmsg+0x6f9/0x19d0 net/netlink/af_netlink.c:1975
 sock_recvmsg_nosec net/socket.c:794 [inline]
 sock_recvmsg+0x1d1/0x230 net/socket.c:801
 ___sys_recvmsg+0x444/0xae0 net/socket.c:2278
 __sys_recvmsg net/socket.c:2327 [inline]
 __do_sys_recvmsg net/socket.c:2337 [inline]
 __se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334
 __x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334
 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x441119
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffc7f008a8 EFLAGS: 00000207 ORIG_RAX: 000000000000002f
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000441119
RDX: 0000000000000040 RSI: 00000000200005c0 RDI: 0000000000000003
RBP: 00000000006cc018 R08: 0000000000000100 R09: 0000000000000100
R10: 0000000000000100 R11: 0000000000000207 R12: 0000000000402080
R13: 0000000000402110 R14: 0000000000000000 R15: 0000000000000000

Uninit was stored to memory at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:246 [inline]
 kmsan_save_stack mm/kmsan/kmsan.c:261 [inline]
 kmsan_internal_chain_origin+0x13d/0x240 mm/kmsan/kmsan.c:469
 kmsan_memcpy_memmove_metadata+0x1a9/0xf70 mm/kmsan/kmsan.c:344
 kmsan_memcpy_metadata+0xb/0x10 mm/kmsan/kmsan.c:362
 __msan_memcpy+0x61/0x70 mm/kmsan/kmsan_instr.c:162
 __nla_put lib/nlattr.c:744 [inline]
 nla_put+0x20a/0x2d0 lib/nlattr.c:802
 nlmsg_populate_fdb_fill+0x444/0x810 net/core/rtnetlink.c:3466
 nlmsg_populate_fdb net/core/rtnetlink.c:3775 [inline]
 ndo_dflt_fdb_dump+0x73a/0x960 net/core/rtnetlink.c:3807
 rtnl_fdb_dump+0x1318/0x1cb0 net/core/rtnetlink.c:3979
 netlink_dump+0xc79/0x1c90 net/netlink/af_netlink.c:2244
 __netlink_dump_start+0x10c4/0x11d0 net/netlink/af_netlink.c:2352
 netlink_dump_start include/linux/netlink.h:216 [inline]
 rtnetlink_rcv_msg+0x141b/0x1540 net/core/rtnetlink.c:4910
 netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4965
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x1699/0x1740 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x13c7/0x1440 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg net/socket.c:631 [inline]
 ___sys_sendmsg+0xe3b/0x1240 net/socket.c:2116
 __sys_sendmsg net/socket.c:2154 [inline]
 __do_sys_sendmsg net/socket.c:2163 [inline]
 __se_sys_sendmsg+0x305/0x460 net/socket.c:2161
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:246 [inline]
 kmsan_internal_poison_shadow+0x6d/0x130 mm/kmsan/kmsan.c:170
 kmsan_kmalloc+0xa1/0x100 mm/kmsan/kmsan_hooks.c:186
 __kmalloc+0x14c/0x4d0 mm/slub.c:3825
 kmalloc include/linux/slab.h:551 [inline]
 __hw_addr_create_ex net/core/dev_addr_lists.c:34 [inline]
 __hw_addr_add_ex net/core/dev_addr_lists.c:80 [inline]
 __dev_mc_add+0x357/0x8a0 net/core/dev_addr_lists.c:670
 dev_mc_add+0x6d/0x80 net/core/dev_addr_lists.c:687
 ip_mc_filter_add net/ipv4/igmp.c:1128 [inline]
 igmp_group_added+0x4d4/0xb80 net/ipv4/igmp.c:1311
 __ip_mc_inc_group+0xea9/0xf70 net/ipv4/igmp.c:1444
 ip_mc_inc_group net/ipv4/igmp.c:1453 [inline]
 ip_mc_up+0x1c3/0x400 net/ipv4/igmp.c:1775
 inetdev_event+0x1d03/0x1d80 net/ipv4/devinet.c:1522
 notifier_call_chain kernel/notifier.c:93 [inline]
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x13d/0x240 kernel/notifier.c:401
 __dev_notify_flags+0x3da/0x860 net/core/dev.c:1733
 dev_change_flags+0x1ac/0x230 net/core/dev.c:7569
 do_setlink+0x165f/0x5ea0 net/core/rtnetlink.c:2492
 rtnl_newlink+0x2ad7/0x35a0 net/core/rtnetlink.c:3111
 rtnetlink_rcv_msg+0x1148/0x1540 net/core/rtnetlink.c:4947
 netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4965
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x1699/0x1740 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x13c7/0x1440 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg net/socket.c:631 [inline]
 ___sys_sendmsg+0xe3b/0x1240 net/socket.c:2116
 __sys_sendmsg net/socket.c:2154 [inline]
 __do_sys_sendmsg net/socket.c:2163 [inline]
 __se_sys_sendmsg+0x305/0x460 net/socket.c:2161
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7

Bytes 36-37 of 105 are uninitialized
Memory access of size 105 starts at ffff88819686c000
Data copied to user address 0000000020000380

Fixes: d83b06036048 ("net: add fdb generic dump routine")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Ido Schimmel <idosch@mellanox.com>
Cc: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Prevent invalid access to skb->prev in __qdisc_drop_all

[ Upstream commit 9410d386d0a829ace9558336263086c2fbbe8aed ]

__qdisc_drop_all() accesses skb->prev to get to the tail of the
segment-list.

With commit 68d2f84a1368 ("net: gro: properly remove skb from list")
the skb-list handling has been changed to set skb->next to NULL and set
the list-poison on skb->prev.

With that change, __qdisc_drop_all() will panic when it tries to
dereference skb->prev.

Since commit 992cba7e276d ("net: Add and use skb_list_del_init().")
__list_del_entry is used, leaving skb->prev unchanged (thus,
pointing to the list-head if it's the first skb of the list).
This will make __qdisc_drop_all modify the next-pointer of the list-head
and result in a panic later on:

[   34.501053] general protection fault: 0000 [#1] SMP KASAN PTI
[   34.501968] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.20.0-rc2.mptcp #108
[   34.502887] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
[   34.504074] RIP: 0010:dev_gro_receive+0x343/0x1f90
[   34.504751] Code: e0 48 c1 e8 03 42 80 3c 30 00 0f 85 4a 1c 00 00 4d 8b 24 24 4c 39 65 d0 0f 84 0a 04 00 00 49 8d 7c 24 38 48 89 f8 48 c1 e8 03 <42> 0f b6 04 30 84 c0 74 08 3c 04
[   34.507060] RSP: 0018:ffff8883af507930 EFLAGS: 00010202
[   34.507761] RAX: 0000000000000007 RBX: ffff8883970b2c80 RCX: 1ffff11072e165a6
[   34.508640] RDX: 1ffff11075867008 RSI: ffff8883ac338040 RDI: 0000000000000038
[   34.509493] RBP: ffff8883af5079d0 R08: ffff8883970b2d40 R09: 0000000000000062
[   34.510346] R10: 0000000000000034 R11: 0000000000000000 R12: 0000000000000000
[   34.511215] R13: 0000000000000000 R14: dffffc0000000000 R15: ffff8883ac338008
[   34.512082] FS:  0000000000000000(0000) GS:ffff8883af500000(0000) knlGS:0000000000000000
[   34.513036] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   34.513741] CR2: 000055ccc3e9d020 CR3: 00000003abf32000 CR4: 00000000000006e0
[   34.514593] Call Trace:
[   34.514893]  <IRQ>
[   34.515157]  napi_gro_receive+0x93/0x150
[   34.515632]  receive_buf+0x893/0x3700
[   34.516094]  ? __netif_receive_skb+0x1f/0x1a0
[   34.516629]  ? virtnet_probe+0x1b40/0x1b40
[   34.517153]  ? __stable_node_chain+0x4d0/0x850
[   34.517684]  ? kfree+0x9a/0x180
[   34.518067]  ? __kasan_slab_free+0x171/0x190
[   34.518582]  ? detach_buf+0x1df/0x650
[   34.519061]  ? lapic_next_event+0x5a/0x90
[   34.519539]  ? virtqueue_get_buf_ctx+0x280/0x7f0
[   34.520093]  virtnet_poll+0x2df/0xd60
[   34.520533]  ? receive_buf+0x3700/0x3700
[   34.521027]  ? qdisc_watchdog_schedule_ns+0xd5/0x140
[   34.521631]  ? htb_dequeue+0x1817/0x25f0
[   34.522107]  ? sch_direct_xmit+0x142/0xf30
[   34.522595]  ? virtqueue_napi_schedule+0x26/0x30
[   34.523155]  net_rx_action+0x2f6/0xc50
[   34.523601]  ? napi_complete_done+0x2f0/0x2f0
[   34.524126]  ? kasan_check_read+0x11/0x20
[   34.524608]  ? _raw_spin_lock+0x7d/0xd0
[   34.525070]  ? _raw_spin_lock_bh+0xd0/0xd0
[   34.525563]  ? kvm_guest_apic_eoi_write+0x6b/0x80
[   34.526130]  ? apic_ack_irq+0x9e/0xe0
[   34.526567]  __do_softirq+0x188/0x4b5
[   34.527015]  irq_exit+0x151/0x180
[   34.527417]  do_IRQ+0xdb/0x150
[   34.527783]  common_interrupt+0xf/0xf
[   34.528223]  </IRQ>

This patch makes sure that skb->prev is set to NULL when entering
netem_enqueue.

Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: 68d2f84a1368 ("net: gro: properly remove skb from list")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: don't allow __set_phy_supported to add unsupported modes

[ Upstream commit d2a36971ef595069b7a600d1144c2e0881a930a1 ]

Currently __set_phy_supported allows to add modes w/o checking whether
the PHY supports them. This is wrong, it should never add modes but
only remove modes we don't want to support.

The commit marked as fixed didn't do anything wrong, it just copied
existing functionality to the helper which is being fixed now.

Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_en: Change min MTU size to ETH_MIN_MTU

[ Upstream commit 24be19e47779d604d1492c114459dca9a92acf78 ]

NIC driver minimal MTU size shall be set to ETH_MIN_MTU, as defined in
the RFC791 and in the network stack. Remove old mlx4_en only define for
it, which was set to wrong value.

Fixes: b80f71f5816f ("ethernet/mellanox: use core min/max MTU checking")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_core: Correctly set PFC param if global pause is turned off.

[ Upstream commit bd5122cd1e0644d8bd8dd84517c932773e999766 ]

rx_ppp and tx_ppp can be set between 0 and 255, so don't clamp to 1.

Fixes: 6e8814ceb7e8 ("net/mlx4_en: Fix mixed PFC and Global pause user control requests")
Signed-off-by: Tarick Bedeir <tarick@google.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: 8139cp: fix a BUG triggered by changing mtu with network traffic

[ Upstream commit a5d4a89245ead1f37ed135213653c5beebea4237 ]

When changing mtu many times with traffic, a bug is triggered:

[ 1035.684037] kernel BUG at lib/dynamic_queue_limits.c:26!
[ 1035.684042] invalid opcode: 0000 [#1] SMP
[ 1035.684049] Modules linked in: loop binfmt_misc 8139cp(OE) macsec
tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag tcp_lp
fuse uinput xt_CHECKSUM iptable_mangle ipt_MASQUERADE
nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4
nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun
bridge stp llc ebtable_filter ebtables ip6table_filter devlink
ip6_tables iptable_filter sunrpc snd_hda_codec_generic snd_hda_intel
snd_hda_codec snd_hda_core snd_hwdep ppdev snd_seq iosf_mbi crc32_pclmul
parport_pc snd_seq_device ghash_clmulni_intel parport snd_pcm
aesni_intel joydev lrw snd_timer virtio_balloon sg gf128mul glue_helper
ablk_helper cryptd snd soundcore i2c_piix4 pcspkr ip_tables xfs
libcrc32c sr_mod sd_mod cdrom crc_t10dif crct10dif_generic ata_generic
[ 1035.684102]  pata_acpi virtio_console qxl drm_kms_helper syscopyarea
sysfillrect sysimgblt floppy fb_sys_fops crct10dif_pclmul
crct10dif_common ttm crc32c_intel serio_raw ata_piix drm libata 8139too
virtio_pci drm_panel_orientation_quirks virtio_ring virtio mii dm_mirror
dm_region_hash dm_log dm_mod [last unloaded: 8139cp]
[ 1035.684132] CPU: 9 PID: 25140 Comm: if-mtu-change Kdump: loaded
Tainted: G           OE  ------------ T 3.10.0-957.el7.x86_64 #1
[ 1035.684134] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 1035.684136] task: ffff8f59b1f5a080 ti: ffff8f5a2e32c000 task.ti:
ffff8f5a2e32c000
[ 1035.684149] RIP: 0010:[<ffffffffba3a40d0>]  [<ffffffffba3a40d0>]
dql_completed+0x180/0x190
[ 1035.684162] RSP: 0000:ffff8f5a75483e50  EFLAGS: 00010093
[ 1035.684162] RAX: 00000000000000c2 RBX: ffff8f5a6f91c000 RCX:
0000000000000000
[ 1035.684162] RDX: 0000000000000000 RSI: 0000000000000184 RDI:
ffff8f599fea3ec0
[ 1035.684162] RBP: ffff8f5a75483ea8 R08: 00000000000000c2 R09:
0000000000000000
[ 1035.684162] R10: 00000000000616ef R11: ffff8f5a75483b56 R12:
ffff8f599fea3e00
[ 1035.684162] R13: 0000000000000001 R14: 0000000000000000 R15:
0000000000000184
[ 1035.684162] FS:  00007fa8434de740(0000) GS:ffff8f5a75480000(0000)
knlGS:0000000000000000
[ 1035.684162] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1035.684162] CR2: 00000000004305d0 CR3: 000000024eb66000 CR4:
00000000001406e0
[ 1035.684162] Call Trace:
[ 1035.684162]  <IRQ>
[ 1035.684162]  [<ffffffffc08cbaf8>] ? cp_interrupt+0x478/0x580 [8139cp]
[ 1035.684162]  [<ffffffffba14a294>]
__handle_irq_event_percpu+0x44/0x1c0
[ 1035.684162]  [<ffffffffba14a442>] handle_irq_event_percpu+0x32/0x80
[ 1035.684162]  [<ffffffffba14a4cc>] handle_irq_event+0x3c/0x60
[ 1035.684162]  [<ffffffffba14db29>] handle_fasteoi_irq+0x59/0x110
[ 1035.684162]  [<ffffffffba02e554>] handle_irq+0xe4/0x1a0
[ 1035.684162]  [<ffffffffba7795dd>] do_IRQ+0x4d/0xf0
[ 1035.684162]  [<ffffffffba76b362>] common_interrupt+0x162/0x162
[ 1035.684162]  <EOI>
[ 1035.684162]  [<ffffffffba0c2ae4>] ? __wake_up_bit+0x24/0x70
[ 1035.684162]  [<ffffffffba1e46f5>] ? do_set_pte+0xd5/0x120
[ 1035.684162]  [<ffffffffba1b64fb>] unlock_page+0x2b/0x30
[ 1035.684162]  [<ffffffffba1e4879>] do_read_fault.isra.61+0x139/0x1b0
[ 1035.684162]  [<ffffffffba1e9134>] handle_pte_fault+0x2f4/0xd10
[ 1035.684162]  [<ffffffffba1ebc6d>] handle_mm_fault+0x39d/0x9b0
[ 1035.684162]  [<ffffffffba76f5e3>] __do_page_fault+0x203/0x500
[ 1035.684162]  [<ffffffffba76f9c6>] trace_do_page_fault+0x56/0x150
[ 1035.684162]  [<ffffffffba76ef42>] do_async_page_fault+0x22/0xf0
[ 1035.684162]  [<ffffffffba76b788>] async_page_fault+0x28/0x30
[ 1035.684162] Code: 54 c7 47 54 ff ff ff ff 44 0f 49 ce 48 8b 35 48 2f
9c 00 48 89 77 58 e9 fe fe ff ff 0f 1f 80 00 00 00 00 41 89 d1 e9 ef fe
ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 55 8d 42 ff 48
[ 1035.684162] RIP  [<ffffffffba3a40d0>] dql_completed+0x180/0x190
[ 1035.684162]  RSP <ffff8f5a75483e50>

It's not the same as in 7fe0ee09 patch described.
As 8139cp uses shared irq mode, other device irq will trigger
cp_interrupt to execute.

cp_change_mtu
 -> cp_close
 -> cp_open

In cp_close routine  just before free_irq(), some interrupt may occur.
In my environment, cp_interrupt exectutes and IntrStatus is 0x4,
exactly TxOk. That will cause cp_tx to wake device queue.

As device queue is started, cp_start_xmit and cp_open will run at same
time which will cause kernel BUG.

For example:
[#] for tx descriptor

At start:

[#][#][#]
num_queued=3

After cp_init_hw->cp_start_hw->netdev_reset_queue:

[#][#][#]
num_queued=0

When 8139cp starts to work then cp_tx will check
num_queued mismatchs the complete_bytes.

The patch will check IntrMask before check IntrStatus in cp_interrupt.
When 8139cp interrupt is disabled, just return.

Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: sr: properly initialize flowi6 prior passing to ip6_route_output

[ Upstream commit 1b4e5ad5d6b9f15cd0b5121f86d4719165958417 ]

In 'seg6_output', stack variable 'struct flowi6 fl6' was missing
initialization.

Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

neighbour: Avoid writing before skb->head in neigh_hh_output()

[ Upstream commit e6ac64d4c4d095085d7dd71cbd05704ac99829b2 ]

While skb_push() makes the kernel panic if the skb headroom is less than
the unaligned hardware header size, it will proceed normally in case we
copy more than that because of alignment, and we'll silently corrupt
adjacent slabs.

In the case fixed by the previous patch,
"ipv6: Check available headroom in ip6_xmit() even without options", we
end up in neigh_hh_output() with 14 bytes headroom, 14 bytes hardware
header and write 16 bytes, starting 2 bytes before the allocated buffer.

Always check we're not writing before skb->head and, if the headroom is
not enough, warn and drop the packet.

v2:
 - instead of panicking with BUG_ON(), WARN_ON_ONCE() and drop the packet
   (Eric Dumazet)
 - if we avoid the panic, though, we need to explicitly check the headroom
   before the memcpy(), otherwise we'll have corrupted slabs on a running
   kernel, after we warn
 - use __skb_push() instead of skb_push(), as the headroom check is
   already implemented here explicitly (Eric Dumazet)

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Check available headroom in ip6_xmit() even without options

[ Upstream commit 66033f47ca60294a95fc85ec3a3cc909dab7b765 ]

Even if we send an IPv6 packet without options, MAX_HEADER might not be
enough to account for the additional headroom required by alignment of
hardware headers.

On a configuration without HYPERV_NET, WLAN, AX25, and with IPV6_TUNNEL,
sending short SCTP packets over IPv4 over L2TP over IPv6, we start with
100 bytes of allocated headroom in sctp_packet_transmit(), end up with 54
bytes after l2tp_xmit_skb(), and 14 bytes in ip6_finish_output2().

Those would be enough to append our 14 bytes header, but we're going to
align that to 16 bytes, and write 2 bytes out of the allocated slab in
neigh_hh_output().

KASan says:

[  264.967848] ==================================================================
[  264.967861] BUG: KASAN: slab-out-of-bounds in ip6_finish_output2+0x1aec/0x1c70
[  264.967866] Write of size 16 at addr 000000006af1c7fe by task netperf/6201
[  264.967870]
[  264.967876] CPU: 0 PID: 6201 Comm: netperf Not tainted 4.20.0-rc4+ #1
[  264.967881] Hardware name: IBM 2827 H43 400 (z/VM 6.4.0)
[  264.967887] Call Trace:
[  264.967896] ([<00000000001347d6>] show_stack+0x56/0xa0)
[  264.967903]  [<00000000017e379c>] dump_stack+0x23c/0x290
[  264.967912]  [<00000000007bc594>] print_address_description+0xf4/0x290
[  264.967919]  [<00000000007bc8fc>] kasan_report+0x13c/0x240
[  264.967927]  [<000000000162f5e4>] ip6_finish_output2+0x1aec/0x1c70
[  264.967935]  [<000000000163f890>] ip6_finish_output+0x430/0x7f0
[  264.967943]  [<000000000163fe44>] ip6_output+0x1f4/0x580
[  264.967953]  [<000000000163882a>] ip6_xmit+0xfea/0x1ce8
[  264.967963]  [<00000000017396e2>] inet6_csk_xmit+0x282/0x3f8
[  264.968033]  [<000003ff805fb0ba>] l2tp_xmit_skb+0xe02/0x13e0 [l2tp_core]
[  264.968037]  [<000003ff80631192>] l2tp_eth_dev_xmit+0xda/0x150 [l2tp_eth]
[  264.968041]  [<0000000001220020>] dev_hard_start_xmit+0x268/0x928
[  264.968069]  [<0000000001330e8e>] sch_direct_xmit+0x7ae/0x1350
[  264.968071]  [<000000000122359c>] __dev_queue_xmit+0x2b7c/0x3478
[  264.968075]  [<00000000013d2862>] ip_finish_output2+0xce2/0x11a0
[  264.968078]  [<00000000013d9b14>] ip_finish_output+0x56c/0x8c8
[  264.968081]  [<00000000013ddd1e>] ip_output+0x226/0x4c0
[  264.968083]  [<00000000013dbd6c>] __ip_queue_xmit+0x894/0x1938
[  264.968100]  [<000003ff80bc3a5c>] sctp_packet_transmit+0x29d4/0x3648 [sctp]
[  264.968116]  [<000003ff80b7bf68>] sctp_outq_flush_ctrl.constprop.5+0x8d0/0xe50 [sctp]
[  264.968131]  [<000003ff80b7c716>] sctp_outq_flush+0x22e/0x7d8 [sctp]
[  264.968146]  [<000003ff80b35c68>] sctp_cmd_interpreter.isra.16+0x530/0x6800 [sctp]
[  264.968161]  [<000003ff80b3410a>] sctp_do_sm+0x222/0x648 [sctp]
[  264.968177]  [<000003ff80bbddac>] sctp_primitive_ASSOCIATE+0xbc/0xf8 [sctp]
[  264.968192]  [<000003ff80b93328>] __sctp_connect+0x830/0xc20 [sctp]
[  264.968208]  [<000003ff80bb11ce>] sctp_inet_connect+0x2e6/0x378 [sctp]
[  264.968212]  [<0000000001197942>] __sys_connect+0x21a/0x450
[  264.968215]  [<000000000119aff8>] sys_socketcall+0x3d0/0xb08
[  264.968218]  [<000000000184ea7a>] system_call+0x2a2/0x2c0

[...]

Just like ip_finish_output2() does for IPv4, check that we have enough
headroom in ip6_xmit(), and reallocate it if we don't.

This issue is older than git history.

Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: ipv6: netfilter: Adjust the frag mem limit when truesize changes

[ Upstream commit ebaf39e6032faf77218220707fc3fa22487784e0 ]

The *_frag_reasm() functions are susceptible to miscalculating the byte
count of packet fragments in case the truesize of a head buffer changes.
The truesize member may be changed by the call to skb_unclone(), leaving
the fragment memory limit counter unbalanced even if all fragments are
processed. This miscalculation goes unnoticed as long as the network
namespace which holds the counter is not destroyed.

Should an attempt be made to destroy a network namespace that holds an
unbalanced fragment memory limit counter the cleanup of the namespace
never finishes. The thread handling the cleanup gets stuck in
inet_frags_exit_net() waiting for the percpu counter to reach zero. The
thread is usually in running state with a stacktrace similar to:

 PID: 1073   TASK: ffff880626711440  CPU: 1   COMMAND: "kworker/u48:4"
  #5 [ffff880621563d48] _raw_spin_lock at ffffffff815f5480
  #6 [ffff880621563d48] inet_evict_bucket at ffffffff8158020b
  #7 [ffff880621563d80] inet_frags_exit_net at ffffffff8158051c
  #8 [ffff880621563db0] ops_exit_list at ffffffff814f5856
  #9 [ffff880621563dd8] cleanup_net at ffffffff814f67c0
 #10 [ffff880621563e38] process_one_work at ffffffff81096f14

It is not possible to create new network namespaces, and processes
that call unshare() end up being stuck in uninterruptible sleep state
waiting to acquire the net_mutex.

The bug was observed in the IPv6 netfilter code by Per Sundstrom.
I thank him for his analysis of the problem. The parts of this patch
that apply to IPv4 and IPv6 fragment reassembly are preemptive measures.

Signed-off-by: Jiri Wiesner <jwiesner@suse.com>
Reported-by: Per Sundstrom <per.sundstrom@redqube.se>
Acked-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.88