i965: Avoid int64 induced warnings

Just add types into unsupported or double equivalent spots.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa/program: Add unused ir operations.

v2 (idr): "cut them down later" => Remove ir_unop_b2u64 and
ir_unop_u642b.  Handle these with extra i2u or u2i casts just like
uint(bool) and bool(uint) conversion is done.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Allow GLSL_TYPE_INT64 for ir_unop_abs and ir_unop_sign

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Print GLSL_TYPE_UINT64 and GLSL_TYPE_INT64 values

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Add interaction between ARB_gpu_shader_int64 and ARB_shader_clock

If ARB_gpu_shader_int64 is supported, ARB_shader_clock also adds
clockARB() that returns a uint64_t.  Rather than add new opcodes and
intrinsics for this, just wrap the existing intrinsic with a
packUint2x32.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Add 64-bit integer functions

These are all the allowed 64-bit functions from ARB_gpu_shader_int64
spec.

v2: restrict int64/double functions better.

v3 (idr): Delete spurious blank lines.  Suggested by Matt.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl/varying_packing: Add 64-bit integer support

As for the double code, but using the 64-bit integer conversions.

v2 (idr): Remove some spurious u2i() and i2u() operations when packing
and unpacking, respectively, int64_t varyings.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v1]
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl/ast: Add 64-bit integer support in some places.

Just add support in two more places in ast parsing.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Add 64-bit integer support to some operations.

This adds 64-bit integer support to some AST and IR operations where
it is needed.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

glsl/ir_builder: Add support for some 64-bit bitcasts.

We need builder support to implement some of the builtins.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl/ast: Add 64-bit integer support to conversion functions

This adds support to call the new operations on conversions.

v2 (idr): Delete an unnecessary break-statement.  Noticed by Matt.  Add
a missing blank line.  Noticed by Ian.

v3 (idr): "cut them down later" => Remove ir_unop_b2u64 and
ir_unop_u642b.  Handle these with extra i2u or u2i casts just like
uint(bool) and bool(uint) conversion is done.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v1]
Reviewed-by: Matt Turner <mattst88@gmail.com> [v2]
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

glsl: Add 64-bit integer support for constant expressions

This just adds the new operations and add 64-bit integer support to all
the existing cases where it is needed.

v2: fix some issues found in testing.
v2.1: add unreachable (Ian), add missing int/uint pack/unpack (Dave).

v3 (idr): Rebase on top of idr's series to generate
ir_expression_operation_constant.h. In addition, this version:

    Adds missing support for ir_unop_bit_not, ir_binop_all_equal,
    ir_binop_any_nequal, ir_binop_vector_extract,
    ir_triop_vector_insert, and ir_quadop_vector.

    Removes support for uint64_t from ir_unop_abs and ir_unop_sign.

v4 (idr): "cut them down later" => Remove ir_unop_b2u64 and
ir_unop_u642b.  Handle these with extra i2u or u2i casts just like
uint(bool) and bool(uint) conversion is done.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v2]
Reviewed-by: Matt Turner <mattst88@gmail.com> [v3]
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

glsl/ir: Add support for 64-bit integer conversions.

This adds all the conversions in the world, I'm not 100% sure of all of
these are needed, but add all of them and we can cut them down later.

v2: fix issue with packing output types.

v3 (idr): Rebase on top of idr's series to generate
ir_expression_operation_constant.h.  Fix transposed ir_validate
assertions for ir_unop_u642i64 and ir_unop_i642u64.  Add missing
automatic type setup for ir_unop_u642i64 and ir_unop_i642u64.

v4 (idr): "cut them down later" => Remove ir_unop_b2u64 and
ir_unop_u642b.  Handle these with extra i2u or u2i casts just like
uint(bool) and bool(uint) conversion is done.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v2]
Reviewed-by: Matt Turner <mattst88@gmail.com> [v3]
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

glsl: Add 64-bit integer support to uniform initialiser code

Just add support to the double case, same code should work.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl/varyings: Add 64-bit integer support.

This adds 64-bit ints to the link_varyings 64-bit support.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl/ast/ir: Add 64-bit integer constant support

This adds support for 64-bit integer constants to the parser,
ast and ir.

v2: fix a few issues found in testing.

v3: Add missing ir_constant copy contructor support.

v4: Use PRIu64 and PRId64 in printfs in glsl_parser_extras.cpp.
Suggested by Nicolai.  Rebase on Marek's linalloc changes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v2]
Reviewed-by: Matt Turner <mattst88@gmail.com> [v3]
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

mesa: Add support for 64-bit integer uniforms

This hooks up the API to the internals for 64-bit integer uniforms.

v2: update to use non-strict aliased alternatives

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Add basic ARB_gpu_shader_int64 types

This adds the builtins and the lexer support.

To avoid too many warnings, it adds basic support to the type in a few
other places in mesa, mostly in the trivial places.

It also adds a query to be used later for if a type is an integer 32 or 64.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Add ARB_gpu_shader_int64 boilerplate.

This just adds the basic boilerplate support.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Add ARB_gpu_shader_int64 extension bits

This just adds the usual boilerplate in mesa core.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

mapi: Add support for ARB_gpu_shader_int64.

Just add the boilerplate xml code.

v2 (idr): Update dispatch_sanity.  Only add extension functions in core
profile.

v3 (idr): Remove comment line from gl_API.xml.  Suggested by Matt.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v1]
Reviewed-by: Matt Turner <mattst88@gmail.com>

anv: don't require render target isl bit for depth/stencil surfaces

Blorp can deal with depth/stencil surfaces blits/copies without the
render target requirement. Also having both render target and
depth/stencil requirement is incompatible from isl's point of view.

This fixes an image creation issue in the high level quality settings
of the Unity3D player, which requires a depth texture with src/dst
transfer & 4x multisampling.

v2: Simply aspect checking condition (Jason)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: 13.0 17.0 <mesa-stable@lists.freedesktop.org>

spirv: don't assert with location decorations on non i/o variables

Some applications might add location decoration to samplers. Rather
than raising an error it seems it would make more sense to just
discard these decorations.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: 17.0 <mesa-stable@lists.freedesktop.org>

i965: Validate "Special Cases for Byte Operations"

Do this in general_restrictions_based_on_operand_types() because the two
rules that "Special Cases for Byte Operations" relax are checked there.

i965: Validate "Region Alignment Rules"

i965: Validate "General Restrictions Based on Operand Types"

i965: Validate "General Restrictions on Regioning Parameters"

i965: Replace reg_type_size[] with a function.

A function is necessary to handle immediate types.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Validate math instruction sources.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Claim that SEND/math has two sources.

src1 must be a descriptor (including the information to determine that
the SEND is doing an extended math operation), but src0 can actually be
null since it serves as the source of the implicit GRF -> MRF move.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Simplify num_sources_from_inst().

desc will always be non-NULL, because brw_validate_instructions() does
not attempt to validate any instructions that fail the
is_unsupported_inst() check.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Factor out send_restrictions() function.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Factor out sources_not_null() validation function.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Structure code so unsupported inst will not generate more errors.

We want to rely on brw_opcode_desc() always returning non-NULL in other
validation functions. Other validation functions will be in the else
case of the block added in this patch.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Add a test for the EU assembly validator.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Add a CHECK macro to call more complicated validation funcs.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Make ERROR_IF usable from other functions.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Mark error annotation on correct SIMD16 inst.

inst, whose assignment can be seen in the last line of context pointed
to the correct instruction in the SIMD16 program, but src_offset was the
offset from the beginning of the SIMD16 program.

So if an instruction at offset 0x100 in the SIMD16 program was illegal,
we would mark an error on the instruction at offset 0x100 (which is
likely in the SIMD8 program).

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/vec4: Use UW-typed operands when dest is UW.

Using a UD-typed operand makes the execution size D, and if the size of
the execution type is greater than the size of the destination type, the
destination must be appropriately strided.

We actually just want UW-types all around.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Use W-typed immediate in brw_F32TO16().

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

gtest: Update to 1.8.0.

Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Don't change F->VF if dest type is DF.

We change the immediate source type to VF to allow instruction
compaction, but there are no entires in the compaction table for DF, so
there's no point in doing this.

Additionally, I mixing floating-point types is now allowed except for
F and VF.

anv: fix comment typo

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

spirv: fix warn string typo

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

blorp: remove unnecessary struct declaration

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

Revert "radeonsi: reject invalid vertex element formats"

This reverts commit 9e4d1d8a7c0d60a6975d186944cd870e06f94773.

It broke arb_vertex_type_10f_11f_11f_rev-draw-vertices, which has
first_non_void == -1.

gallium: add pipe_screen::resource_changed callback wrappers

Add resource_changed to the ddebug, rbug, and trace wrappers. Since it
is optional, there is no need to add it to noop.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Suggested-by: Nicolai Hähnle <nhaehnle@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

st/mesa: ask pipe driver to recreate derived internal resources when (re-)binding external textures

Use the resource_changed callback to invalidate internal resources
derived from external textures when they are (re-)bound. This is needed
to comply with the requirement from the GL_OES_EGL_image_external
extension that a call to glBindTexture guarantees that all further
sampling will return values that correspond to the values in the
external texture at or after the time that glBindTexture was called.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

mesa: update external textures when (re-)binding

To comply with the requirement from the GL_OES_EGL_image_external
extension that a call to glBindTexture guarantees that all further
sampling will return values that correspond to the values in the
external texture at or after the time that glBindTexture was called,
do not bail out early from mesa_BindTextures if the target is
external.
This will later allow the state tracker to instruct the pipe driver
to invalidate internal resources derived from the external texture.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

etnaviv: implement resource_changed to invalidate internal resources derived from imported buffers

Implement the resource_changed pipe callback to invalidate internal
resources derived from imported buffers. This is needed to update the
texture for re-imported renderables.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

etnaviv: initialize seqno of imported resources

Imported resources already have contents that we want to be copied to
texture resources derived from them. Set initial seqno of imported
resources to 1, just as if it had already been rendered to.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

st/dri: ask the driver to update its internal copies on reimport

For imported buffers that can't be used directly as a source to the
texture samplers, the pipe driver might need to create an internal
copy, for example in a different tiling layout. When buffers are
reimported they may contain new image data, so the driver internal
copies need to be recreated.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

gallium: add pipe_screen::resource_changed

Add a hook to tell drivers that an imported resource may have changed
and they need to update their internal derived resources.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

configure.ac: move require_dri_shared_libs_and_glapi() before its users

Otherwise we'll get a lovely message as below:
"require_dri_shared_libs_and_glapi: command not found"

Cc: Steven Newbury <steve@snewbury.org.uk>
Reported-by: Steven Newbury <steve@snewbury.org.uk>
Fixes: da410e6afad "configure: explicitly require shared glapi for
enable-dri"
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Steven Newbury <steve@snewbury.org.uk>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

gallium/hud: add missing break in hud_cpufreq_graph_install()

Fixes: e99b9395bef "gallium/hud: Add support for CPU frequency monitoring"
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

android: correct typo in build

Fixes: 63c58dfc653c499aab5b8d0ea07f1dc1af88c856
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

nir: add min/max optimisation

Add the following optimisations:

min(x, -x) = -abs(x)
min(x, -abs(x)) = -abs(x)
min(x, abs(x)) = x
max(x, -abs(x)) = x
max(x, abs(x)) = abs(x)
max(x, -x) = abs(x)

shader-db:

total instructions in shared programs: 13067779 -> 13067775 (-0.00%)
instructions in affected programs: 249 -> 245 (-1.61%)
helped: 4
HURT: 0

total cycles in shared programs: 252054838 -> 252054806 (-0.00%)
cycles in affected programs: 504 -> 472 (-6.35%)
helped: 2
HURT: 0

Signed-off-by: Elie Tournier <tournier.elie@gmail.com>
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir/algebraic: Only include nir_search_helpers once

We were including it once per value, so probably around 10k times.
Let's not cause the compiler any more work than we have to.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

i965: Remove unnecessary mt->compressed checks

It's harmless to use ALIGN_NPOT() for uncompressed formats
because they have block width/height = 1.

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>

i965: Fix indentation in brw_miptree_layout_2d()

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>

i965: Fix comment to include 3d textures

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>

i965: Delete pending CCS and HiZ ops in intel_miptree_make_shareable()

Fixes crash in piglit
`egl_khr_gl_renderbuffer_image-clear-shared-image GL_DEPTH_COMPONENT24`
on Skylake.

The crash happened because blorp attempted to execute a pending hiz
clear after the hiz buffer was deleted. Deleting the pending hiz ops
when the hiz buffer gets deleted fixes the crash.

For good measure, this patch also deletes all pending CCS/MCS ops when
the CCS/MCS buffer gets deleted. I'm now aware of any bugs
caused by the dangling ops, but deleting them is clearly the right thing
to do.

Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99265

vulkan/wsi: clarify the severity of lack of DRI3 v2

The current message sounds like a small warning, clarify that it can
result in lack of presentation support and application crashes.

v2: add "if they do" (Bas)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98263
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Acked-by: Jason ekstrand <jason@jlekstrand.net>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

radv: fix include order for installed headers v2

In situations where libdrm_amdgpu and mesa are installed to the same
location, the mesa installed headers will take precedence over the git
source headers.

This is due to the AMDGPU_CFLAGS containing the install directory.

This situation can cause build errors if the git version of a header is
newer than the currently installed version of a header (e.g. git pull
updates vulkan.h)

Note: using the same install prefix for mesa and libdrm is probably a
common occurrence since it is described in the radeonBuildHowTo wiki:
https://www.x.org/wiki/radeonBuildHowTo/

v2: added sign-off

Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

docs/releasing: document post branch version bump

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

mesa: Bump version to 17.1.0-devel

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

radeonsi: reject invalid vertex element formats

This should fix a coverity defect.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radeonsi: don't forget to add HTILE to the buffer list for texturing

This fixes VM faults. Discovered by Samuel Pitoiset.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98975
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99450

Cc: 17.0 13.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

st/vdpau: only send buffers with B8G8R8A8 format to X

PresentPixmap only works if the pixmap depth matches with the
window depth, otherwise it returns a BadMatch protocol error.
Even if the depths match, the result won't look correctly
if the VDPAU RGB component order doesn't match the X11 one so
we only allow the X11 format.
For other buffers we copy them to a buffer which is send to X.

v2: only send buffers with format VDP_RGBA_FORMAT_B8G8R8A8
v3: reword commit message
v4: add comment explaining the code

Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

radeonsi: fix texture gather on stencil textures

At least on VI, texture gather doesn't work with a 24_8 data format, so
use 8_8_8_8 and a modified swizzle instead.

A bit of background: When creating a GL_STENCIL_INDEX8 texture, we select
the X24S8 pipe format because we don't support stencil-only render targets
properly. With mip-mapping this can lead to a setup where the tiling is
incompatible with stencil texturing, and a flushed stencil texture is
used. For the flushed stencil, a literal X24S8 is used because there were
issues with an 8bpp DB->CB copy.

Longer term, it would be good if we could get away from these workarounds,
i.e. properly support an S8 format for stencil-only rendering and flushed
stencil. Since stencil texturing is somewhat rare, it's not a high
priority.

Fixes GL45-CTS.texture_cube_map_array.sampling.

Cc: 17.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>

mesa/main: Fix FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE for NONE attachment type

When the attachment type is NONE (att->Type),
FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE should be NONE always.

Note that technically, the current behaviour follows the spec. From
OpenGL 4.5 spec, Section 9.2.3 "Framebuffer Object Queries":

   "If the value of FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE is NONE, then
    either no framebuffer is bound to target; or the default
    framebuffer is bound, attachment is DEPTH or STENCIL, and the
    number of depth or stencil bits, respectively, is zero."

Reading literally this paragraph, for the default framebuffer, NONE
should be only returned if attachment is DEPTH and STENCIL without
being allocated.

But it doesn't makes too much sense to return DEFAULT_FRAMEBUFFER if
the attachment type is NONE. For example, this can happens if the
attachment is FRONT_RIGHT run on monoscopic mode, as that attachment
is only available on stereo mode.

With the current behaviour, defensive querying of the object type
would not work properly. So you could query the object type checking
for NONE, get DEFAULT_FRAMEBUFFER, and then get and INVALID_OPERATION
when requesting other pnames (like RED_SIZE), as the real attachment
type is NONE.

This fixes:
GL45-CTS.direct_state_access.framebuffers_get_attachment_parameters

v2: don't change the behaviour for att->Type != GL_NONE, as caused
    some ES CTS regressions
v3: simplify condition (Iago)

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

radeonsi: Always leave poly_offset in a valid state

This commit makes si_update_poly_offset set poly_offset to NULL if
uses_poly_offset is false. This way poly_offset either points into the
currently queued rasterizer, or it is NULL.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99451
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

mesa/main: fix meta caller of _mesa_ClampColor

Since _mesa_ClampColor properly checks for support of the API function
now, it's meta callers need to check support as well.

Fixes: 963311b71f ("mesa/main: fix version/extension checks in _mesa_ClampColor")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99401
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>

mesa/glsl: move TransformFeedbackBufferStride to gl_shader

Here we remove the single use of this field in gl_linked_shader
which allows us to move the field out of gl_shader_info

While we are at it we rewrite link_xfb_stride_layout_qualifiers()
to be more clear.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

glsl: exit loop early if we find xfb layout qualifers

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

glsl: set InnerCoverage directly in gl_program

Also move out of the shared gl_shader_info.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

glsl: tidy up PostDepthCoverage shader field

There is no reason for this to be in the shared gl_shader_info or
to copy it to gl_program at the end of linking (its already there).

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

mesa/glsl: move pixel_center_integer to gl_shader

This is only used by gl_linked_shader as a temp during linking
so use a temp there instead.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

mesa/glsl: move origin_upper_left to gl_shader

This is only used by gl_linked_shader as a temp during linking
so use a temp there instead.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

mesa/glsl: move uses_gl_fragcoord to gl_shader

This is only used by gl_linked_shader as a temp during linking
so use a temp there instead.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

mesa/glsl: move redeclares_gl_fragcoord to gl_shader

This is never used in gl_linked_shader other than as a temp
during linking so just use a temp instead.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

mesa/glsl: move ARB_fragment_coord_conventions_enable field

This is only used by gl_shader not gl_linked_shader so move it
there.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

st/mesa/glsl: set early_fragment_tests directly in shader_info

We also move EarlyFragmentTests out of the gl_shader_info struct
as it is now only used by gl_shader.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

mesa/glsl/i965: set and use tcs vertices_out directly

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

i965: get outputs_written from gl_program

There is no need to go via the pointer in nir_shader. This change
is required for the shader cache as we don't create a nir_shader.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

gallivm: use #ifdef not #if for PIPE_ARCH_BIG_ENDIAN

This fixes the build on ppc/s390.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

mesa: don't always set _NEW_PROGRAM when linking

We only need to set it when linking was successful and the program
being linked is currently active.

The programs_in_use mask is just used as a flag for now but in
a future change we will use it to update the CurrentProgram array.

V2: make sure to flush vertices before linking (suggested by Marek)

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: change init subroutine defaults helper to work per gl_program

A later patch will result in SSO programs calling this helper
per gl_program rather than per gl_shader_program.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

mesa/glsl: move ProgramResourceList to gl_shader_program_data

We also move NumProgramResourceList at the same time.

GLES does interface validation on SSO at runtime so we need to move
this to be able to switch to storing gl_program pointers in
CurrentProgram.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

glsl: store number of explicit uniform loactions in gl_shader_program

This allows us to cleanup the functions that pass this count around,
but more importantly we will be able to call the uniform linking
functions from that backends linker without having to pass this
information to the backend directly via Driver.LinkShader().

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

glsl: create a new link_and_validate_uniforms() helper

Currently this just breaks up the linking code a bit but in the
future i965 will call this from the backend via Driver.LinkShader()
so that we can do NIR optimisations before assigning uniform
locations.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

glsl: make a bunch of varying linking functions static

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

glsl: move more varying linking code to link_varyings.cpp

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/blorp: Make post draw flush more explicit

Blits do not need any special treatment as the target buffer
object is added to render cache just as one does for normal draw.
Color clears and resolves in turn require explicit "end of pipe
synchronization". It is not clear what this means exactly but the
assumption is that render cache flush with command stream stall
should be sufficient.

Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965/gen6: Issue direct depth stall and flush after depth clear

instead of calling unconditionally brw_emit_mi_flush() which
does:

   brw_emit_pipe_control_flush(brw,
                                PIPE_CONTROL_DEPTH_CACHE_FLUSH |
                                PIPE_CONTROL_RENDER_TARGET_FLUSH |
                                PIPE_CONTROL_CS_STALL);

   brw_emit_pipe_control_flush(brw,
                                PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE |
                                PIPE_CONTROL_CONST_CACHE_INVALIDATE);

Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Make depth clear flushing more explicit

Current blorp logic issues unconditional "flush everything"
(see brw_emit_mi_flush()) after each render. For example, all
blits issue this unconditionally which shouldn't be needed if
they set render cache properly so that subsequent renders do
necessary flushing before drawing.

In case of piglit:

ext_framebuffer_multisample-accuracy all_samples depth_draw small

intel_hiz_exec() is always preceded by blorb blit and the
unconditional flush looks to hide the lack of stall and flushes
in depth clears. By removing the brw_emit_mi_flush() I get gpu
hangs.

This patch adds the stalls and flushes mandated by the spec
and gets rid of those hangs.

v2 (Jason, Ken): Document the rational for separating
                 depth cache flush and stall on Gen7.

Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965/blorp: Use the render cache mechanism instead of explicit flushing

by replacing brw_emit_mi_flush() with brw_render_cache_set_check_flush().
The latter splits the flush in two:

   brw_emit_pipe_control_flush(brw,
                               PIPE_CONTROL_DEPTH_CACHE_FLUSH |
                               PIPE_CONTROL_RENDER_TARGET_FLUSH |
                               PIPE_CONTROL_CS_STALL);

   brw_emit_pipe_control_flush(brw,
                               PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE |
                               PIPE_CONTROL_CONST_CACHE_INVALIDATE);

instead of

   int flags = PIPE_CONTROL_NO_WRITE | PIPE_CONTROL_RENDER_TARGET_FLUSH;
   if (brw->gen >= 6) {
      flags |= PIPE_CONTROL_INSTRUCTION_INVALIDATE |
               PIPE_CONTROL_CONST_CACHE_INVALIDATE |
               PIPE_CONTROL_DEPTH_CACHE_FLUSH |
               PIPE_CONTROL_VF_CACHE_INVALIDATE |
               PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE |
               PIPE_CONTROL_CS_STALL;
   }
   brw_emit_pipe_control_flush(brw, flags);

v2 (Jason): Check that destination exists before trying to add to
            render cache. Depth clears and resolves don't have it.

Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

utils: really remove the __END_DECLS macro

Fixes: d1efa09d342 "util: import sha1 implementation from OpenBSD"
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

utils: build sha1/disk cache only with Android/Autoconf

Earlier commit imported a SHA1 implementation and relaxed the SHA1 and
disk cache handling, broking the Windows builds.

Restrict things for now until we get to a proper fix.

Fixes: d1efa09d342 "util: import sha1 implementation from OpenBSD"
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

util: import sha1 implementation from OpenBSD

At the moment we support 5+ different implementations each with varying
amount of bugs - from thread safely problems [1], to outright broken
implementation(s) [2]

In order to accommodate these we have 150+ lines of configure script and
extra two configure toggles. Whist an actual implementation being
~200loc and our current compat wrapping ~250.

Let's not forget that different people use different code paths, thus
effectively makes it harder to test and debug since the default
implementation is automatically detected.

To minimise all these lovely experiences, import the "100% Public
Domain" OpenBSD sha1 implementation. Clearly document any changes needed
to get building correctly, since many/most of those can be upstreamed
making future syncs easier.

As an added bonus this will avoid all the 'fun' experiences trying to
integrate it with the Android and SCons builds.

v2: Manually expand __BEGIN_DECLS/__END_DECLS and document (Tapani).

Furthermore it seems that some games (or surrounding runtime) static
link against OpenSSL resulting in conflicts. For more information see
the discussion thread [3]

Bugzilla [1]: https://bugs.freedesktop.org/show_bug.cgi?id=94904
Bugzilla [2]: https://bugs.freedesktop.org/show_bug.cgi?id=97967
[3] https://lists.freedesktop.org/archives/mesa-dev/2017-January/140748.html
Cc: Mark Janes <mark.a.janes@intel.com>
Cc: Vinson Lee <vlee@freedesktop.org>
Cc: Tapani Pälli <tapani.palli@intel.com>
Cc: Jonathan Gray <jsg@jsg.id.au>
Tested-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com> (v1)
Acked-by: Jason Ekstrand <jason@jlekstrand.net> (v1)