GDB Administrator [Sat, 13 May 2017 00:00:51 +0000 (00:00 +0000)]
Automatic date update in version.in
Igor Kudrin [Fri, 12 May 2017 22:24:32 +0000 (15:24 -0700)]
Fix misplacement of a relaxed section on AArch64.
gold/ChangeLog
PR gold/21430
* aarch64.cc
(AArch64_relobj::convert_input_section_to_relaxed_section):
Set the section offset to -1ULL.
(Target_aarch64::relocate_section): Adjust the view in case
of a relaxed input section.
* testsuite/Makefile.am (pr21430): New test.
* testsuite/Makefile.in: Regenerate
* testsuite/pr21430.s: New test source file.
* testsuite/pr21430.sh: New test script.
H.J. Lu [Fri, 12 May 2017 15:07:21 +0000 (08:07 -0700)]
x86: Merge X86_ISA_1_USED/X86_ISA_1_NEEDED properties
If there are more than GNU property note in an input, we should merge
X86_ISA_1_USED and X86_ISA_1_NEEDED properties.
bfd/
* elf32-i386.c (elf_i386_parse_gnu_properties): Merge
GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED
properties.
* elf64-x86-64.c (elf_x86_64_parse_gnu_properties): Likewise.
ld/
* testsuite/ld-i386/i386.exp: Run property-x86-3.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/property-x86-3.d: New file.
* testsuite/ld-i386/property-x86-3.s: Likewise.
* testsuite/ld-x86-64/property-x86-3.d: Likewise.
* testsuite/ld-x86-64/property-x86-3.s: Likewise.
Tom Tromey [Fri, 12 May 2017 04:22:36 +0000 (22:22 -0600)]
Avoid exponential behavior in rust_evaluate_subexp
The STRUCTOP_STRUCT case in rust_evaluate_subexp would evaluate its
LHS, and then, if it did not need Rust-specific treatment, it would
back up and re-evaluate the entire STRUCTOP_STRUCT part of the
expression using evaluate_subexp_standard. This yields exponential
behavior and causes some expressions to evaluate extremely slowly.
The fix is to simply do the needed work inline.
This is PR rust/21483.
ChangeLog
2017-05-12 Tom Tromey <tom@tromey.com>
PR rust/21483:
* rust-lang.c (rust_evaluate_subexp) <STRUCTOP_STRUCT>: Don't
recurse, just call value_struct_elt directly.
Tom Tromey [Fri, 12 May 2017 01:50:47 +0000 (19:50 -0600)]
Fix rust_dump_subexp_body
rust_dump_subexp_body was not correct in a couple of cases. While
debugging the bug I was really interested in, this caused a crash.
This patch fixes the problems. No test case because, IIRC there
generally aren't tests for expression dumping.
ChangeLog
2017-05-12 Tom Tromey <tom@tromey.com>
* rust-lang.c (rust_dump_subexp_body) <STRUCTOP_ANONYMOUS,
OP_RUST_ARRAY>: Fix.
Tom Tromey [Fri, 12 May 2017 01:44:43 +0000 (19:44 -0600)]
Replace "return" with "break"
This replaces a "return" with a "break" in rust_print_subexp, for
consistency.
ChangeLog
2017-05-12 Tom Tromey <tom@tromey.com>
* rust-lang.c (rust_print_subexp): Replace "return" with "break".
Maciej W. Rozycki [Fri, 12 May 2017 01:28:54 +0000 (02:28 +0100)]
MIPS/GAS: Unify GP-relative percent-ops
For a reason that is unclear commit
d6f165938798 ("Support for MIPS16
HI16/LO16 relocations"),
<https://sourceware.org/ml/binutils/2005-02/msg00332.html>, which has
added support for the R_MIPS16_GPREL relocation, has spelled its
corresponding MIPS16 percent-op as `%gprel', rather than `%gp_rel' which
is how its regular MIPS counterpart is spelled. To make assembly code
sharing easier between the regular MIPS and the MIPS16 ISA make both
percent-op spellings acceptable in both kinds of code now.
Parts of this change by Matthew Fortune.
gas/
* config/tc-mips.c (mips_percent_op): Add "%gprel".
(mips16_percent_op): Add "%gp_rel".
* testsuite/gas/mips/elf-rel8.s:: Add `%gprel' forms.
* testsuite/gas/mips/elf-rel8-mips16.s: Add `%gp_rel' forms.
* testsuite/gas/mips/elf-rel8.d: Adjust accordingly.
* testsuite/gas/mips/elf-rel8-mips16.d: Likewise.
Maciej W. Rozycki [Fri, 12 May 2017 00:09:36 +0000 (01:09 +0100)]
MIPS16/opcodes: Make the handling of BREAK and SDBBP consistent
Disassemble the MIPS16 BREAK and SDBBP instruction's immediate operand
in the hexadecimal rather than decimal numeral system and add respective
operandless variants with an implicit 0 operand, making our handling of
these instructions consistent with how we have processed their regular
MIPS and microMIPS counterparts since forever.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'6'>: Switch the operand
type to hexadecimal.
(mips16_opcodes): Add operandless "break" and "sdbbp" entries.
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: Adjust BREAK
and SDBBP disassembly.
gas/
* testsuite/gas/mips/mips16.d: Adjust BREAK disassembly.
* testsuite/gas/mips/mips16-64@mips16.d: Likewise.
* testsuite/gas/mips/mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-macro.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16-macro.d: Likewise.
* testsuite/gas/mips/mips16-sub.d: Likewise.
* testsuite/gas/mips/mips16-32@mips16-sub.d: Likewise.
GDB Administrator [Fri, 12 May 2017 00:00:43 +0000 (00:00 +0000)]
Automatic date update in version.in
Maciej W. Rozycki [Thu, 11 May 2017 23:46:45 +0000 (00:46 +0100)]
MIPS/opcodes: Mark descriptive SYNC mnemonics as aliases
Following the way how descriptive SYNC mnemonics have been defined in
the architecture[1][2] mark them as aliases, so that the generic SYNC
instruction can be alternatively disassembled along with its immediate
operand, as noted in the documents referred.
References:
[1] "MIPS Architecture For Programmers, Volume II-A: The MIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00086,
Revision 5.04, December 11, 2013, Table 4.7 "Encodings of the
Bits[10:6] of the SYNC instruction; the SType Field", p. 305
[2] "MIPS Architecture for Programmers, Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Table 5.28 "Encodings of the
Bits[10:6] of the SYNC instruction; the SType Field", p. 481
opcodes/
* mips-opc.c (mips_builtin_opcodes): Mark "synciobdma", "syncs",
"syncw", "syncws", "sync_acquire", "sync_mb", "sync_release",
"sync_rmb" and "sync_wmb" as aliases.
* micromips-opc.c (micromips_opcodes): Mark "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" as aliases.
gas/
* testsuite/gas/mips/mips32r2-sync-1.d: New test.
* testsuite/gas/mips/micromips@mips32r2-sync-1.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
H.J. Lu [Thu, 11 May 2017 18:26:26 +0000 (11:26 -0700)]
x86-64: Rename .plt.bnd to .plt.sec
Rename .plt.bnd to .plt.sec to indicate that this is used as the second
PLT section. There is no change in run-time behavior. We also scan the
.plt.sec section to synthesize PLT symbols.
bfd/
* elf64-x86-64.c (elf_x86_64_link_hash_entry): Rename plt_bnd
to plt_second.
(elf_x86_64_link_hash_table): Rename plt_bnd/plt_bnd_eh_frame
to plt_second/plt_second_eh_frame.
(elf_x86_64_link_hash_newfunc): Updated.
(elf_x86_64_allocate_dynrelocs): Likewise.
(elf_x86_64_size_dynamic_sections): Likewise.
(elf_x86_64_relocate_section): Likewise.
(elf_x86_64_finish_dynamic_symbol): Likewise.
(elf_x86_64_finish_dynamic_sections): Likewise.
(elf_x86_64_plt_type): Rename plt_bnd to plt_second.
(elf_x86_64_get_synthetic_symtab): Updated. Also scan the
.plt.sec section.
(elf_backend_setup_gnu_properties): Updated. Create the
.plt.sec section instead of the .plt.sec section.
ld/
* emulparams/elf_x86_64.sh (TINY_READONLY_SECTION): Replace
.plt.bnd with .plt.sec.
* testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1.d: Likewise.
* testsuite/ld-x86-64/mpx3.dd: Likewise.
* testsuite/ld-x86-64/mpx3n.dd: Likewise.
* testsuite/ld-x86-64/mpx4.dd: Likewise.
* testsuite/ld-x86-64/mpx4n.dd: Likewise.
* testsuite/ld-x86-64/plt-main-bnd-now.rd: Likewise.
* testsuite/ld-x86-64/pr21038b-now.d: Likewise.
* testsuite/ld-x86-64/pr21038b.d: Likewise.
* testsuite/ld-x86-64/pr21038c-now.d: Likewise.
* testsuite/ld-x86-64/pr21038c.d: Likewise.
H.J. Lu [Thu, 11 May 2017 14:42:30 +0000 (07:42 -0700)]
x86: Generate PLT relocations for -z now
This patch partially reverses:
commit
25070364b0ce33eed46aa5d78ebebbec6accec7e
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Sat May 16 07:00:21 2015 -0700
Don't generate PLT relocations for now binding
to support LD_AUDIT and LD_PROFILE with -z now. If there is an existing
GOT relocation, it is still used to avoid PLT relocation against the same
function symbol.
bfd/
* elf32-i386.c (elf_i386_allocate_dynrelocs): Partially revert
commit
25070364b0ce33eed46aa5d78ebebbec6accec7e.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewse.
ld/
* testsuite/ld-i386/plt-pic2.dd: Updated.
* testsuite/ld-i386/plt2.dd: Likewise.
* testsuite/ld-i386/plt2.rd: Likewise.
* testsuite/ld-i386/pr17689now.rd: Likewise.
* testsuite/ld-ifunc/ifunc-16-i386-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-16-x86-64-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-i386-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise.
* testsuite/ld-x86-64/bnd-branch-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise.
* testsuite/ld-x86-64/plt2.dd: Likewise.
* testsuite/ld-x86-64/plt2.rd: Likewise.
* testsuite/ld-x86-64/pr17689now.rd: Likewise.
* testsuite/ld-x86-64/pr21038b-now.d: Likewise.
* testsuite/ld-x86-64/pr21038c-now.d: Likewise.
GDB Administrator [Thu, 11 May 2017 00:00:48 +0000 (00:00 +0000)]
Automatic date update in version.in
Maciej W. Rozycki [Wed, 10 May 2017 19:14:11 +0000 (20:14 +0100)]
MIPS/GAS/testsuite: Convert ISA override list tests to dump tests
And remove the zillion duplicate sources. Also `mips1@isa-override-2.l'
is the same as `r3000@isa-override-2.l', so remove the latter too, now
that `r3000@isa-override-2.d' can name a file to match stderr output
against.
gas/
* testsuite/gas/mips/isa-override-2.d: New test.
* testsuite/gas/mips/mips1@isa-override-2.d: New test.
* testsuite/gas/mips/r3000@isa-override-2.d: New test.
* testsuite/gas/mips/r3900@isa-override-2.d: New test.
* testsuite/gas/mips/mips2@isa-override-2.d: New test.
* testsuite/gas/mips/mips32@isa-override-2.d: New test.
* testsuite/gas/mips/mips32r2@isa-override-2.d: New test.
* testsuite/gas/mips/mips32r3@isa-override-2.d: New test.
* testsuite/gas/mips/mips32r5@isa-override-2.d: New test.
* testsuite/gas/mips/mips32r6@isa-override-2.d: New test.
* testsuite/gas/mips/octeon3@isa-override-2.d: New test.
* testsuite/gas/mips/r3000@isa-override-2.l: Remove list test.
* testsuite/gas/mips/mips1@isa-override-2.s: Remove test source.
* testsuite/gas/mips/r3000@isa-override-2.s: Remove test source.
* testsuite/gas/mips/r3900@isa-override-2.s: Remove test source.
* testsuite/gas/mips/mips2@isa-override-2.s: Remove test source.
* testsuite/gas/mips/mips32@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/mips32r2@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/mips32r3@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/mips32r5@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/mips32r6@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/octeon3@isa-override-2.s: Remove test
source.
* gas/testsuite/gas/mips/mips.exp: Fold corresponding list tests
into the new tests.
Maciej W. Rozycki [Wed, 10 May 2017 18:03:15 +0000 (19:03 +0100)]
MIPS/binutils/testsuite: Define names of temporary files
Define `tempfile' and `copyfile' in `mips.exp' so that standalone script
execution via `RUNTESTFLAGS=mips.exp' works rather than producing:
Running .../binutils/testsuite/binutils-all/mips/mips.exp ...
ERROR: tcl error sourcing
.../binutils/testsuite/binutils-all/mips/mips.exp.
ERROR: can't read "tempfile": no such variable
while executing
"binutils_assemble_flags ${srcfile} $tempfile $opts(as)"
(procedure "run_dump_test" line 207)
invoked from within
"run_dump_test "mips-ase-1""
invoked from within
"if [is_elf_format] {
run_dump_test "mips-ase-1"
run_dump_test "mips-ase-2"
run_dump_test "mips-ase-3"
run_dump_test "mixed-mips16"
..."
(file ".../binutils/testsuite/binutils-all/mips/mips.exp" line 22)
invoked from within
"source .../binutils/testsuite/binutils-all/mips/mips.exp"
("uplevel" body line 1)
invoked from within
"uplevel #0 source .../binutils/testsuite/binutils-all/mips/mips.exp"
invoked from within
"catch "uplevel #0 source $test_file_name""
testcase .../binutils/testsuite/binutils-all/mips/mips.exp completed in 0 seconds
binutils/
* testsuite/binutils-all/mips/mips.exp: Define `tempfile' and
`copyfile' variables.
H.J. Lu [Wed, 10 May 2017 17:51:35 +0000 (10:51 -0700)]
i386: Set CHECK_RELOCS_AFTER_OPEN_INPUT to yes
All linker targets based on elf32-i386 should check relocations after
opening all inputs since this is how elf32-i386 works.
* emulparams/i386lynx.sh (CHECK_RELOCS_AFTER_OPEN_INPUT): Set
to yes.
* emulparams/i386moss.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
Likewise.
* emulparams/i386nw.sh (CHECK_RELOCS_AFTER_OPEN_INPUT): Likewise.
Maciej W. Rozycki [Wed, 10 May 2017 17:19:56 +0000 (18:19 +0100)]
MIPS/GAS/testsuite: Correct swapped MIPS16e subset test names
Correct the test names swapped between common and 64-bit MIPS16e subset
tests.
gas/
* testsuite/gas/mips/mips16e-sub.d: Correct test name.
* testsuite/gas/mips/mips16-32@mips16e-sub.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16e-sub.d: Likewise.
* testsuite/gas/mips/mips16e-64-sub.d: Likewise.
* testsuite/gas/mips/mips16-32@mips16e-64-sub.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16e-64-sub.d: Likewise.
* testsuite/gas/mips/mips16e-32@mips16e-64-sub.d: Likewise.
Jose E. Marchesi [Wed, 10 May 2017 16:44:19 +0000 (18:44 +0200)]
bfd: fix the deletion of relocs in sparc64
This patch fixes the deletion of relocations in BFD sections in
sparc64 targets.
A specialized `_bfd_set_reloc' function is provided that updates the
internal canon_reloc_count(sec) counter instead of sec->reloc_count.
Additionally, the `write_relocs' callback in elf64-sparc is adapted to
use the canon_reloc_count to traverse `sec->orelocation'.
Tested in sparc64-linux-gnu targets.
Fixes an existing failure in the merge-notes objcopy test.
No regressions.
bfd/ChangeLog:
2017-05-10 Jose E. Marchesi <jose.marchesi@oracle.com>
* elf64-sparc.c (elf64_sparc_set_reloc): New function.
(bfd_elf64_set_reloc): Define.
(elf64_sparc_write_relocs): Use `canon_reloc_count'.
Jose E. Marchesi [Wed, 10 May 2017 16:40:04 +0000 (18:40 +0200)]
bfd: new BFD target entry point _bfd_set_reloc.
This patch adds a new entry point to the BFD_JUMP_TABLE_RELOCS. The
previous common implementation `bfd_set_reloc', in bfd/bfd.c, has been
moved to bfd/reloc.c with the name `_bfd_generic_set_reloc', and all
BFD targets has been adapted to use it.
This patch doesn't introduce any change on functionality, but prepares
the ground for further work.
bfd/ChangeLog:
2017-05-10 Jose E. Marchesi <jose.marchesi@oracle.com>
* targets.c (BFD_JUMP_TABLE_RELOCS): Add NAME##_set_reloc.
(struct bfd_target): New field _bfd_set_reloc.
* bfd.c (bfd_set_reloc): Call backend _set_bfd.
* reloc.c (_bfd_generic_set_reloc): New function.
* coffcode.h (coff_set_reloc): Define to _bfd_generic_set_reloc.
* nlm-target.h (nlm_set_reloc): Likewise.
* coff-rs6000.c (_bfd_xcoff_set_reloc): Likewise.
* aout-tic30.c (MY_set_reloc): Likewise.
* aout-target.h (MY_set_reloc): Likewise.
* elfxx-target.h (bfd_elfNN_set_reloc): Likewise.
* coff-alpha.c (_bfd_ecoff_set_reloc): Likewise.
* mach-o-target.c (bfd_mach_o_set_reloc): Likewise.
* vms-alpha.c (alpha_vms_set_reloc): Likewise.
* aout-adobe.c (aout_32_set_reloc): Likewise.
* bout.c (b_out_set_reloc): Likewise.
* coff-mips.c (_bfd_ecoff_set_reloc): Likewise.
* i386os9k.c (aout_32_set_reloc): Likewise.
* ieee.c (ieee_set_reloc): Likewise.
* oasys.c (oasys_set_reloc): Likewise.
* som.c (som_set_reloc): Likewise.
* versados.c (versados_set_reloc): Likewise.
* coff64-rs6000.c (rs6000_xcoff64_vec): Add
_bfd_generic_set_reloc.
(rs6000_xcoff64_aix_vec): LIkewise.
* libbfd.c (_bfd_norelocs_set_reloc): New function.
* libbfd-in.h: Prototype for _bfd_norelocs_set_reloc.
* i386msdos.c (msdos_set_reloc): Define to
_bfd_norelocs_set_reloc.
* elfcode.h (elf_set_reloc): Define.
* bfd-in2.h: Regenerated.
H.J. Lu [Wed, 10 May 2017 16:28:00 +0000 (09:28 -0700)]
x86-64: Use .plt.bnd for IFUNC function address
When -z bndplt is used, we must use the .plt.bnd entry for IFUNC function
address.
bfd/
PR ld/21481
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Use .plt.bnd
for IFUNC function address.
ld/
PR ld/21481
* testsuite/ld-x86-64/pr21481a.c: New file.
* testsuite/ld-x86-64/pr21481b.S: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run PR ld/21481 tests.
Maciej W. Rozycki [Wed, 10 May 2017 13:37:21 +0000 (14:37 +0100)]
MIPS/GAS/testsuite: Remove stale `mips16-macro' list test output
Complement commit
c60aaac10f9a1 ("MIPS/GAS/testsuite: Extend MIPS16
testing over multiple ISAs") and remove a stale `mips16-macro' list test
output replaced with the `mips16-32@mips16-macro' stderr output.
gas/
* testsuite/gas/mips/mips16-macro.l: Remove list test.
Maciej W. Rozycki [Wed, 10 May 2017 13:17:19 +0000 (14:17 +0100)]
MIPS/GAS/testsuite: Remove last remnants of ECOFF support
Complement commit
16e5e222b6ea ("Make gas/mips/mips.exp ELF-only"),
<https://sourceware.org/ml/binutils/2013-06/msg00195.html>, and commit
fcedb9f3ca87 ("MIPS/GAS/testsuite: Remove remnants of a.out/ECOFF
support"), and remove stale ECOFF test dumps previously missed.
gas/
* testsuite/gas/mips/r3900@ecoff@ld.d: Remove test.
* testsuite/gas/mips/mips2@ecoff@ld.d: Remove test.
* testsuite/gas/mips/mips32@ecoff@ld.d: Remove test.
* testsuite/gas/mips/mips32r2@ecoff@ld.d: Remove test.
* testsuite/gas/mips/r3900@ecoff@ld-forward.d: Remove test.
* testsuite/gas/mips/mips2@ecoff@ld-forward.d: Remove test.
* testsuite/gas/mips/mips32@ecoff@ld-forward.d: Remove test.
* testsuite/gas/mips/mips32r2@ecoff@ld-forward.d: Remove test.
* testsuite/gas/mips/mips1@ecoff@sd.d: Remove test.
* testsuite/gas/mips/r3000@ecoff@sd.d: Remove test.
* testsuite/gas/mips/r3900@ecoff@sd.d: Remove test.
* testsuite/gas/mips/mips2@ecoff@sd.d: Remove test.
* testsuite/gas/mips/mips32@ecoff@sd.d: Remove test.
* testsuite/gas/mips/mips32r2@ecoff@sd.d: Remove test.
* testsuite/gas/mips/mips1@ecoff@sd-forward.d: Remove test.
* testsuite/gas/mips/r3000@ecoff@sd-forward.d: Remove test.
* testsuite/gas/mips/r3900@ecoff@sd-forward.d: Remove test.
* testsuite/gas/mips/mips2@ecoff@sd-forward.d: Remove test.
* testsuite/gas/mips/mips32@ecoff@sd-forward.d: Remove test.
* testsuite/gas/mips/mips32r2@ecoff@sd-forward.d: Remove test.
Claudiu Zissulescu [Wed, 10 May 2017 12:42:22 +0000 (14:42 +0200)]
[ARC] Object attributes.
gas/
2017-05-10 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/attr-arc600.d: New file.
* testsuite/gas/arc/attr-arc600_mul32x16.d: Likewise.
* testsuite/gas/arc/attr-arc600_norm.d: Likewise.
* testsuite/gas/arc/attr-arc601.d: Likewise.
* testsuite/gas/arc/attr-arc601_mul32x16.d: Likewise.
* testsuite/gas/arc/attr-arc601_mul64.d: Likewise.
* testsuite/gas/arc/attr-arc601_norm.d: Likewise.
* testsuite/gas/arc/attr-arc700.d: Likewise.
* testsuite/gas/arc/attr-arcem.d: Likewise.
* testsuite/gas/arc/attr-archs.d: Likewise.
* testsuite/gas/arc/attr-autodetect-1.d: Likewise.
* testsuite/gas/arc/attr-autodetect-1.s: Likewise.
* testsuite/gas/arc/attr-cpu-a601.d: Likewise.
* testsuite/gas/arc/attr-cpu-a601.s: Likewise.
* testsuite/gas/arc/attr-cpu-a700.d: Likewise.
* testsuite/gas/arc/attr-cpu-a700.s: Likewise.
* testsuite/gas/arc/attr-cpu-em.d: Likewise.
* testsuite/gas/arc/attr-cpu-em.s: Likewise.
* testsuite/gas/arc/attr-cpu-hs.d: Likewise.
* testsuite/gas/arc/attr-cpu-hs.s: Likewise.
* testsuite/gas/arc/attr-em.d: Likewise.
* testsuite/gas/arc/attr-em4.d: Likewise.
* testsuite/gas/arc/attr-em4_dmips.d: Likewise.
* testsuite/gas/arc/attr-em4_fpuda.d: Likewise.
* testsuite/gas/arc/attr-em4_fpus.d: Likewise.
* testsuite/gas/arc/attr-hs.d: Likewise.
* testsuite/gas/arc/attr-hs34.d: Likewise.
* testsuite/gas/arc/attr-hs38.d: Likewise.
* testsuite/gas/arc/attr-hs38_linux.d: Likewise.
* testsuite/gas/arc/attr-mul64.d: Likewise.
* testsuite/gas/arc/attr-name.d: Likewise.
* testsuite/gas/arc/attr-name.s: Likewise.
* testsuite/gas/arc/attr-nps400.d: Likewise.
* testsuite/gas/arc/attr-override-mcpu.d: Likewise.
* testsuite/gas/arc/attr-override-mcpu.s
* testsuite/gas/arc/attr-quarkse_em.d: Likewise.
* testsuite/gas/arc/blank.s: Likewise.
* testsuite/gas/elf/section2.e-arc: Likewise.
* testsuite/gas/arc/cpu-pseudop-1.d: Update test.
* testsuite/gas/arc/cpu-pseudop-2.d: Likewise.
* testsuite/gas/arc/nps400-0.d: Likewise.
* testsuite/gas/elf/elf.exp: Set target_machine for ARC.
* config/tc-arc.c (opcode/arc-attrs.h): Include.
(ARC_GET_FLAG, ARC_SET_FLAG, streq): Define.
(arc_attribute): Declare new function.
(md_pseudo_table): Add arc_attribute.
(cpu_types): Rename default cpu features.
(selected_cpu): Set the default OSABI flag.
(mpy_option): New variable.
(pic_option): Likewise.
(sda_option): Likewise.
(tls_option): Likewise.
(feature_type, feature_list): Remove.
(arc_initial_eflag): Likewise.
(attributes_set_explicitly): New variable.
(arc_check_feature): Check also for the conflicting features.
(arc_select_cpu): Refactor assignment of selected_cpu.eflags.
(arc_option): Remove setting of private flags and architecture.
(check_cpu_feature): Refactor feature names.
(autodetect_attributes): New function.
(assemble_tokens): Use above function.
(md_parse_option): Refactor feature names.
(arc_attribute): New function.
(arc_set_attribute_int): Likewise.
(arc_set_attribute_string): Likewise.
(arc_stralloc): Likewise.
(arc_set_public_attributes): Likewise.
(arc_md_end): Likewise.
(arc_copy_symbol_attributes): Likewise.
(rc_convert_symbolic_attribute): Likewise.
* config/tc-arc.h (md_end): Define.
(CONVERT_SYMBOLIC_ATTRIBUTE): Likewise.
(TC_COPY_SYMBOL_ATTRIBUTES): Likewise.
* doc/c-arc.texi: Document ARC object attributes.
binutils/
2017-05-10 Claudiu Zissulescu <claziss@synopsys.com>
* readelf.c (decode_ARC_machine_flags): Recognize OSABI v4.
(get_arc_section_type_name): New function.
(get_section_type_name): Use the above function.
(display_arc_attribute): New function.
(process_arc_specific): Likewise.
(process_arch_specific): Handle ARC specific information.
* testsuite/binutils-all/strip-3.d: Consider ARC.attributes
section.
include/
2017-05-10 Claudiu Zissulescu <claziss@synopsys.com>
* elf/arc.h (SHT_ARC_ATTRIBUTES): Define.
(Tag_ARC_*): Define.
(E_ARC_OSABI_V4): Define.
(E_ARC_OSABI_CURRENT): Reassign it.
(TAG_CPU_*): Define.
* opcode/arc-attrs.h: New file.
* opcode/arc.h (insn_subclass_t): Assign enum values.
(insn_subclass_t): Update enum with QUARKSE1, QUARKSE2, and LL64.
(ARC_EA, ARC_CD, ARC_LLOCK, ARC_ATOMIC, ARC_MPY, ARC_MULT)
(ARC_NPS400, ARC_DPFP, ARC_SPFP, ARC_FPU, ARC_FPUDA, ARC_SWAP)
(ARC_NORM, ARC_BSCAN, ARC_UIX, ARC_TSTAMP, ARC_VBFDW)
(ARC_BARREL, ARC_DSPA, ARC_SHIFT, ARC_INTR, ARC_DIV, ARC_XMAC)
(ARC_CRC): Delete.
bfd/
2017-05-10 Claudiu Zissulescu <claziss@synopsys.com>
* elf32-arc.c (FEATURE_LIST_NAME): Define.
(CONFLICT_LIST): Likewise.
(opcode/arc-attrs.h): Include.
(arc_elf_print_private_bfd_data): Print OSABI v4 flag.
(arc_extract_features): New file.
(arc_stralloc): Likewise.
(arc_elf_merge_attributes): Likewise.
(arc_elf_merge_private_bfd_data): Use object attributes.
(bfd_arc_get_mach_from_attributes): New function.
(arc_elf_object_p): Use object attributes.
(arc_elf_final_write_processing): Likewise.
(elf32_arc_obj_attrs_arg_type): New function.
(elf32_arc_obj_attrs_handle_unknown): Likewise.
(elf32_arc_section_from_shdr): Likewise.
(elf_backend_obj_attrs_vendor): Define.
(elf_backend_obj_attrs_section): Likewise.
(elf_backend_obj_attrs_arg_type): Likewise.
(elf_backend_obj_attrs_section_type): Likewise.
(elf_backend_obj_attrs_handle_unknown): Likewise.
(elf_backend_section_from_shdr): Likewise.
ld/
2017-05-10 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/ld-arc/attr-merge-0.d: New file.
* testsuite/ld-arc/attr-merge-0.s: Likewise.
* testsuite/ld-arc/attr-merge-0e.s: Likewise.
* testsuite/ld-arc/attr-merge-1.d: Likewise.
* testsuite/ld-arc/attr-merge-1.s: Likewise.
* testsuite/ld-arc/attr-merge-1e.s: Likewise.
* testsuite/ld-arc/attr-merge-2.d: Likewise.
* testsuite/ld-arc/attr-merge-2.s: Likewise.
* testsuite/ld-arc/attr-merge-3.d: Likewise.
* testsuite/ld-arc/attr-merge-3.s: Likewise.
* testsuite/ld-arc/attr-merge-3e.s: Likewise.
* testsuite/ld-arc/attr-merge-4.s: Likewise.
* testsuite/ld-arc/attr-merge-5.d: Likewise.
* testsuite/ld-arc/attr-merge-5a.s: Likewise.
* testsuite/ld-arc/attr-merge-5b.s: Likewise.
* testsuite/ld-arc/attr-merge-conflict-isa.d: Likewise.
* testsuite/ld-arc/attr-merge-err-isa.d: Likewise.
* testsuite/ld-arc/attr-merge-incompatible-cpu.d: Likewise.
* testsuite/ld-arc/got-01.d: Update test.
* testsuite/ld-arc/attr-merge-err-quarkse.d: New file.
* testsuite/ld-arc/attr-quarkse.s: Likewise.
* testsuite/ld-arc/attr-quarkse2.s: Likewise.
opcodes/
2017-05-10 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (parse_option): Update quarkse_em option..
* arc-ext-tbl.h (dsp_fp_flt2i, dsp_fp_i2flt): Change subclass to
QUARKSE1.
(dsp_fp_div, dsp_fp_cmp): Change subclass to QUARKSE2.
Kaz Kojima [Wed, 10 May 2017 00:15:19 +0000 (09:15 +0900)]
Remove Kaz Kojima as SH maintainer.
GDB Administrator [Wed, 10 May 2017 00:00:42 +0000 (00:00 +0000)]
Automatic date update in version.in
Awson [Tue, 9 May 2017 13:42:43 +0000 (14:42 +0100)]
Support pe-bigobj-x86-64 as an output format in 64-bit PE based linkers.
PR ld/21471
* pe-dll.c (pe_detail_list): Add entry for pe-bigobj-x86-64.
Yao Qi [Tue, 9 May 2017 11:36:53 +0000 (12:36 +0100)]
Use std::forward_list for current_regcache
gdb:
2017-05-09 Yao Qi <yao.qi@linaro.org>
* regcache.c: Include <forward_list>.
(struct regcache_list): Remove.
(current_regcache): Update.
(get_thread_arch_aspace_regcache): Update for std::forward_list.
(regcache_thread_ptid_changed): Likewise.
(registers_changed_ptid): Likewise.
(current_regcache_size): Likewise.
Yao Qi [Tue, 9 May 2017 11:36:53 +0000 (12:36 +0100)]
Add current_regcache unit test
This patch adds a unit test to current_regcache, to make sure it is
correctly updated by get_thread_arch_aspace_regcache and
registers_changed_ptid.
gdb:
2017-05-09 Yao Qi <yao.qi@linaro.org>
* regcache.c [GDB_SELF_TEST]: Include selftest.h.
(current_regcache_size): New function.
(current_regcache_test): New function.
(_initialize_regcache) [GDB_SELF_TEST]: Register the unit test.
Andrew Goedhart [Tue, 9 May 2017 11:14:48 +0000 (12:14 +0100)]
Fix resolution of R_ARM_THM_ALU_PREL_11_0 relocation against Thumb symbols.
PR ld/21458
* elf32-arm.c (elf32_arm_final_link_relocate): Set the bottom bit
of the value when resolving a R_ARM_THM_ALU_PREL_11_0 relocation
and the destination is a Thumb symbol.
Alan Modra [Tue, 9 May 2017 07:40:17 +0000 (17:10 +0930)]
ld.texinfo, use "affects" instead of "effects"
* ld.texinfo (orphan sections): Grammar fix.
GDB Administrator [Tue, 9 May 2017 00:00:40 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Mon, 8 May 2017 20:37:50 +0000 (13:37 -0700)]
Add missing initializer to silence GCC 4.2
Silence GCC 4.2:
elf64-x86-64.c: In function ‘elf_x86_64_get_synthetic_symtab’:
elf64-x86-64.c:6490: warning: missing initializer
elf64-x86-64.c:6490: warning: (near initialization for ‘plts[3].sec’)
* elf32-i386.c (elf_i386_get_synthetic_symtab): Add missing
initializer for GCC 4.2.
* lf64-x86-64.c (elf_x86_64_get_synthetic_symtab): Likewise.
H.J. Lu [Mon, 8 May 2017 19:24:11 +0000 (12:24 -0700)]
x86-64: Improve PLT generation and synthetic PLT symbols
On x86-64, the procedure linkage table (PLT) is used to
1. Call external function.
2. Call internal IFUNC function. The best implementation is selected
for the target processor at run-time.
3. Act as the canonical function address.
4. Support LD_AUDIT to audit external function calls.
5. Support LD_PROFILE to profile external function calls.
PLT looks like:
PLT0: push GOT[1]
jmp *GOT[2]
nop
PLT1: jmp *GOT[name1_index]
push name1_reloc_index
jmp PLT0
GOT is an array of addresses. Initially the GOT entry of name1 is
filled with the address of the "push name1_reloc_index" instruction.
The function, name1, is called via "jmp *GOT[name1]" in the PLT entry.
Even when lazy binding is disabled by "-z now", the PLT0 entry may
still be used with LD_AUDIT or LD_PROFILE if PLT entry is used for
canonical function address.
When linker is invoked with "-z bndplt", a different PLT layout in .plt
is used:
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
PLT1: push name1_reloc_index
bnd jmp PLT0
nop
together with a second PLT section, .pl.bnd:
PLT1: bnd jmp *GOT[name1_index]
nop
where the GOT entry of name1 is filled with the address of the push
instruction of the corresponding entry in .plt.
1. With lazy binding, when the external function, name1, is called the
first time, dynamic linker is called via PLT0 to update GOT[name1_index]
with the actual address of name1 and transfers control to name1
afterwards.
2. PLT is also used to call a local IFUNC function, name1, run-time
loader updates GOT[name1_index] when loading the module.
This patch
1. Remove PLT layout configurations from x86-64 backend_data.
2. Add generic, lay and non-lazy PLT layout configurations to x86-64
link_hash_table. Generic PLT layout includes the PLT entry templates,
information how to update the first instruction in PLT and PLT eh_frame
informaton, which are initialized in x86-64 setup_gnu_properties, based
on "-z bndplt" and target selection. PLT section alignment is also set
to PLT entry size for non-NaCl target.
3. Remove elf_x86_64_create_dynamic_sections. create_dynamic_sections
isn't always called, but GOT relocations need GOT relocations. Instead,
create all x86-64 specific dynamic sections with alignment to their entry
size in x86-64 setup_gnu_properties, which initializes elf.dynobj, so
that x86-64 check_relocs can be simplified.
4. Rewrite elf_x86_64_get_synthetic_symtab to check PLT sections against
all dynamic relocations to support both lazy and non-lazy PLTs.
There is no change in PLT. The only externally visible change is the
improvement of synthetic PLT symbols for .plt.got.
bfd/
* elf64-x86-64.c (PLT_ENTRY_SIZE): Renamed to ...
(LAZY_PLT_ENTRY_SIZE): This.
(NON_LAZY_PLT_ENTRY_SIZE): New.
(elf_x86_64_plt0_entry): Renamed to ...
(elf_x86_64_lazy_plt0_entry): This.
(elf_x86_64_plt_entry): Renamed to ...
(elf_x86_64_lazy_plt_entry): This.
(elf_x86_64_bnd_plt0_entry): Renamed to ...
(elf_x86_64_lazy_bnd_plt0_entry): This.
(elf_x86_64_legacy_plt_entry): Removed.
(elf_x86_64_bnd_plt_entry): Renamed to ...
(elf_x86_64_lazy_bnd_plt_entry): This.
(elf_x86_64_legacy_plt2_entry): Renamed to ...
(elf_x86_64_non_lazy_plt_entry): This.
(elf_x86_64_bnd_plt2_entry): Renamed to ...
(elf_x86_64_non_lazy_bnd_plt_entry): This.
(elf_x86_64_eh_frame_plt): Renamed to ...
(elf_x86_64_eh_frame_lazy_plt): This.
(elf_x86_64_eh_frame_bnd_plt): Renamed to ...
(elf_x86_64_eh_frame_lazy_bnd_plt): This.
(elf_x86_64_eh_frame_plt_got): Renamed to ...
(elf_x86_64_eh_frame_non_lazy_plt): This.
(elf_x86_64_lazy_plt_layout): New.
(elf_x86_64_non_lazy_plt_layout): Likewise.
(elf_x86_64_plt_layout): Likewise.
(elf_x86_64_backend_data): Remove PLT layout information. Add
os for target system.
(GET_PLT_ENTRY_SIZE): Removed.
(elf_x86_64_lazy_plt): New.
(elf_x86_64_non_lazy_plt): Likewise.
(elf_x86_64_lazy_bnd_plt): Likewise.
(elf_x86_64_non_lazy_bnd_plt): Likewise.
(elf_x86-64_arch_bed): Updated.
(elf_x86_64_link_hash_table): Add plt, lazy_plt and non_lazy_plt.
(elf_x86_64_create_dynamic_sections): Removed.
(elf_x86_64_check_relocs): Don't check elf.dynobj. Don't call
_bfd_elf_create_ifunc_sections nor _bfd_elf_create_got_section.
(elf_x86-64_adjust_dynamic_symbol): Updated.
(elf_x86_64_allocate_dynrelocs): Updated. Pass 0 as PLT header
size to _bfd_elf_allocate_ifunc_dyn_relocs and don't allocate
size for PLT0 if there is no PLT0. Get plt_entry_size from
non_lazy_plt for non-lazy PLT entries.
(elf_x86_64_size_dynamic_sections): Updated. Get plt_entry_size
from non_lazy_plt for non-lazy PLT entries.
(elf_x86-64_relocate_section): Updated. Properly get PLT index
if there is no PLT0.
(elf_x86_64_finish_dynamic_symbol): Updated. Fill the first slot
in the PLT entry with generic PLT layout. Fill the non-lazy PLT
entries with non-lazy PLT layout. Don't fill the second and third
slots in the PLT entry if there is no PLT0.
(elf_x86_64_finish_dynamic_sections): Updated. Don't fill PLT0
if there is no PLT0. Set sh_entsize on the .plt.got section.
(compare_relocs): New.
(elf_x86_64_plt_type): Likewise.
(elf_x86_64_plt): Likewise.
(elf_x86_64_nacl_plt): New. Forward declaration.
(elf_x86_64_get_plt_sym_val): Removed.
(elf_x86_64_get_synthetic_symtab): Rewrite to check PLT sections
against all dynamic relocations.
(elf_x86_64_link_setup_gnu_properties): New function.
(elf_backend_create_dynamic_sections): Updated.
(elf_backend_setup_gnu_properties): New.
(elf_x86_64_nacl_plt): New.
(elf_x86_64_nacl_arch_bed): Updated.
ld/
* testsuite/ld-ifunc/ifunc-16-x86-64-now.d: New file.
* testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise.
* testsuite/ld-x86-64/bnd-branch-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise.
* testsuite/ld-x86-64/mpx3n.dd: Likewise.
* testsuite/ld-x86-64/mpx4n.dd: Likewise.
* testsuite/ld-x86-64/plt-main-bnd-now.rd: Likewise.
* testsuite/ld-x86-64/plt2.dd: Likewise.
* testsuite/ld-x86-64/plt2.rd: Likewise.
* testsuite/ld-x86-64/plt2.s: Likewise.
* testsuite/ld-x86-64/pr20830a-now.d: Likewise.
* testsuite/ld-x86-64/pr20830b-now.d: Likewise.
* testsuite/ld-x86-64/pr21038a-now.d: Likewise.
* testsuite/ld-x86-64/pr21038b-now.d: Likewise.
* testsuite/ld-x86-64/pr21038c-now.d: Likewise.
* testsuite/ld-x86-64/load1b-nacl.d: Updated.
* testsuite/ld-x86-64/load1b.d: Likewise.
* testsuite/ld-x86-64/plt-main-bnd.dd: Likewise.
* testsuite/ld-x86-64/pr20253-1h.d: Likewise.
* testsuite/ld-x86-64/pr20830a.d: Update the .plt.got section
with func@plt.
* testsuite/ld-x86-64/pr20830b.d: Likewise.
* testsuite/ld-x86-64/pr21038a.d: Likewise.
* testsuite/ld-x86-64/pr21038c.d: Likewise.
* testsuite/ld-x86-64/mpx.exp: Add some -z now tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
Andreas Krebbel [Mon, 8 May 2017 17:10:42 +0000 (19:10 +0200)]
S/390: Fix ifunc missing runtime reloc
This fixes a problem with a missing R_390_64 reloc against .data for a
function pointer to an ifunc function.
No regressions on s390x.
Pushed to mainline.
bfd/ChangeLog:
2017-05-08 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf-s390-common.c: Don't check non_got_ref flag.
* elf32-s390.c (elf_s390_relocate_section): Likewise.
* elf64-s390.c (elf_s390_relocate_section): Likewise.
H.J. Lu [Mon, 8 May 2017 17:10:22 +0000 (10:10 -0700)]
i386: Improve PLT generation and synthetic PLT symbols
On i386, the procedure linkage table (PLT) is used to
1. Call external function.
2. Call internal IFUNC function. The best implementation is selected
for the target processor at run-time.
3. Act as the canonical function address.
4. Support LD_AUDIT to audit external function calls.
5. Support LD_PROFILE to profile external function calls.
PLT looks like:
PLT0: push GOT[1]
jmp *GOT[2]
nop
PLT1: jmp *GOT[name1_index]
push name1_reloc_index
jmp PLT0
GOT is an array of addresses. Initially the GOT entry of name1 is
filled with the address of the "push name1_reloc_index" instruction.
The function, name1, is called via "jmp *GOT[name1]" in the PLT entry.
Even when lazy binding is disabled by "-z now", the PLT0 entry may
still be used with LD_AUDIT or LD_PROFILE if PLT entry is used for
canonical function address.
1. With lazy binding, when the external function, name1, is called the
first time, dynamic linker is called via PLT0 to update GOT[name1_index]
with the actual address of name1 and transfers control to name1
afterwards.
2. PLT is also used to call a local IFUNC function, name1, run-time
loader updates GOT[name1_index] when loading the module.
This patch
1. Remove PLT layout configurations from i386 backend_data.
2. Add generic, lay and non-lazy PLT layout configurations to i386
link_hash_table. Generic PLT layout includes the PLT entry templates,
information how to update the first instruction in PLT and PLT eh_frame
informaton, which are initialized in i386 setup_gnu_properties, based
on PIC and target selection. PLT section alignment is also set to PLT
entry size for non-NaCl/VxWorks target.
3. Remove elf_i386_create_dynamic_sections. create_dynamic_sections
isn't always called, but GOT relocations need GOT relocations. Instead,
create all i386 specific dynamic sections in i386 setup_gnu_properties,
which initializes elf.dynobj, so that i386 check_relocs can be simplified.
4. Rewrite elf_i386_get_synthetic_symtab to check PLT sections against
all dynamic relocations to support both lazy and non-lazy PLTs.
bfd/
* elf32-i386.c (PLT_ENTRY_SIZE): Renamed to ...
(LAZY_PLT_ENTRY_SIZE): This.
(NON_LAZY_PLT_ENTRY_SIZE): New.
(elf_i386_plt0_entry): Renamed to ...
(elf_i386_lazy_plt0_entry): This.
(elf_i386_plt_entry): Renamed to ...
(elf_i386_lazy_plt_entry): This.
(elf_i386_pic_plt0_entry): Renamed to ...
(elf_i386_pic_lazy_plt0_entry): This.
(elf_i386_pic_plt_entry): Renamed to ...
(elf_i386_pic_lazy_plt_entry): This.
(elf_i386_got_plt_entry): Renamed to ...
(elf_i386_non_lazy_plt_entry): This.
(elf_i386_pic_got_plt_entry): Renamed to ...
(elf_i386_pic_non_lazy_plt_entry): This.
(elf_i386_eh_frame_plt): Renamed to ...
(elf_i386_eh_frame_lazy_plt): This.
(elf_i386_eh_frame_plt_got): Renamed to ...
(elf_i386_eh_frame_non_lazy_plt): This.
(elf_i386_plt_layout): Renamed to ...
(elf_i386_lazy_plt_layout): This. Remove eh_frame_plt_got and
eh_frame_plt_got_size.
(elf_i386_non_lazy_plt_layout): New.
(elf_i386_plt_layout): Likewise.
(elf_i386_non_lazy_plt): Likewise.
(GET_PLT_ENTRY_SIZE): Removed.
(elf_i386_plt): Renamed to ...
(elf_i386_lazy_plt): This.
(elf_i386_backend_data): Remove plt. Rename is_vxworks to os.
(elf_i386_arch_bed): Updated.
(elf_i386_link_hash_table): Add plt, lazy_plt and non_lazy_plt.
(elf_i386_create_dynamic_sections): Removed.
(elf_i386_check_relocs): Don't check elf.dynobj. Don't call
_bfd_elf_create_ifunc_sections nor _bfd_elf_create_got_section.
(elf_i386_adjust_dynamic_symbol): Updated.
(elf_i386_allocate_dynrelocs): Updated. Pass 0 as PLT header
size to _bfd_elf_allocate_ifunc_dyn_relocs and don't allocate
size for PLT0 if there is no PLT0.
(elf_i386_size_dynamic_sections): Updated. Check whether GOT
output section is discarded only if GOT isn't empty.
(elf_i386_relocate_section): Updated. Properly get PLT index
if there is no PLT0.
(elf_i386_finish_dynamic_symbol): Updated. Don't fill the
second and third slots in the PLT entry if there is no PLT0.
(elf_i386_finish_dynamic_sections): Updated. Don't fill PLT0
if there is no PLT0. Set sh_entsize on the .plt.got section.
(elf_i386_nacl_plt): Forward declaration.
(elf_i386_get_plt_sym_val): Removed.
(elf_i386_get_synthetic_symtab): Rewrite to check PLT sections
against all dynamic relocations.
(elf_i386_link_setup_gnu_properties): New function.
(elf_backend_create_dynamic_sections): Updated.
(elf_backend_setup_gnu_properties): New.
(elf_i386_nacl_plt): Updated.
(elf_i386_nacl_arch_bed): Likewise.
(elf_i386_vxworks_arch_bed): Likewise.
ld/
* testsuite/ld-i386/i386.exp: Add some -z now tests.
* testsuite/ld-i386/plt-pic2.dd: New file.
* testsuite/ld-i386/plt2.dd: Likewise.
* testsuite/ld-i386/plt2.rd: Likewise.
* testsuite/ld-i386/plt2.s: Likewise.
* testsuite/ld-ifunc/ifunc-16-i386-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-i386-now.d: Likewise.
* testsuite/ld-i386/pr20830.d: Update the .plt.got section
with func@plt.
Thomas Preud'homme [Mon, 8 May 2017 14:26:51 +0000 (15:26 +0100)]
Make import libraries relocatable objects
For ELF targets --out-implib currently generates an executable file
(e_type is ET_EXEC) despite the file being expected to be linked against
some other object file to make an executable later. It seems therefore
more sensible to make the import library a relocatable object file
(e_type set to ET_REL).
Incidentally, as dicted by requirement 8 of
"ARM v8-M Security Extensions: Requirements on Development Tools"
(document ARM-ECM-0359818) version 1.0, import libraries generated when
using --cmse-implib *must* be relocatable object file so this commit
also adds an assert there in case the type of ELF import library is
changed again in the future.
2017-05-08 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* elflink.c (elf_output_implib): Remove executable flag from import
library bfd.
* elf32-arm.c (elf32_arm_filter_implib_symbols): Assert that the import
library is a relocatable object file.
ld/
* testsuite/ld-arm/arm-elf.exp
(Secure gateway import library generation): Check e_type field
of import library and executable produced.
* testsuite/ld-arm/cmse-implib.type: Expectations for e_type field.
Alan Hayward [Mon, 8 May 2017 08:40:07 +0000 (09:40 +0100)]
Remove some uses of MAX_REGISTER_SIZE from mips-tdep.c
gdb/
* mips-tdep.c (mips_o32_return_value): Remove unused buffer.
(print_gp_register_row): Use get_frame_register_value.
Alan Hayward [Mon, 8 May 2017 08:37:26 +0000 (09:37 +0100)]
Remove some uses of MAX_REGISTER_SIZE from mips-linux-tdep.c
gdb/
* mips-linux-tdep.c (mips_supply_gregset): Use raw_supply_zeroed.
(mips_supply_fpregset): Likewise.
(mips64_supply_gregset): Likewise.
Alan Hayward [Mon, 8 May 2017 08:35:45 +0000 (09:35 +0100)]
Remove some uses of MAX_REGISTER_SIZE uses from mn10300-linux-tdep.c
gdb/
* mn10300-linux-tdep.c (am33_supply_gregset_method): Use
regcache->raw_supply_zeroed.
GDB Administrator [Mon, 8 May 2017 00:00:41 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 7 May 2017 00:00:54 +0000 (00:00 +0000)]
Automatic date update in version.in
Sergio Durigan Junior [Wed, 3 May 2017 01:32:33 +0000 (21:32 -0400)]
Rearrange gdb/configure.nat to make it simpler and less redundant
The previous commit introduced gdb/configure.nat, but it was just a
copy-and-past (with the necessary adjustments) from the files under
gdb/config/. We can do better than that.
Instead of using one big 'case' statement that matches the
${gdb_host_cpu} and then match each ${gdb_host}, it is possible to
remove a lof of redundancy by matching the most common ${gdb_host}'s
first, setting the common variables for each, and then proceed to
matching specific ${gdb_host}'s and ${gdb_host_cpu}'s. In other
words, reverse the order of the 'case's and take advantage of the fact
that a lot of parameters are the same for each host.
This commit was tested on x86_64 without regressions.
gdb/ChangeLog:
2017-05-06 Sergio Durigan Junior <sergiodj@redhat.com>
* configure.nat: Rearrange 'case' statements to match
host before cpu.
Sergio Durigan Junior [Tue, 25 Apr 2017 20:03:39 +0000 (16:03 -0400)]
Introduce "gdb/configure.nat" (and delete "gdb/config/*/*.mh" files)
Due to my ongoing work to make it possible for gdbserver to start the
inferior using the shell, I had to share the fork_inferior function
under the "nat/" directory. In order to do that, I created a new file
and put the function there; however, this meant that I now had to
update some of the *.mh files (under "gdb/config") and add the new
file as a dependency to be built natively. Bleh...
After talking a bit to Pedro about this, the idea came up to write a
new "gdb/configure.nat" file, a la "gdb/configure.tgt", which would
concentrate all of the native settings for each host/system. I
decided to tackle this issue.
The patch is simple. All of the previous Makefile variables that were
being declared inside the *.mh files are now inside "gdb/Makefile.in",
and "gdb/configure" is responsible for AC_SUBST'ing them. The
definitions of these variables were put inside "gdb/configure.nat", so
now they're shell variables. For excerpts of Makefile code, one must
create a file under "gdb/config/${gdb_cpu_host}" and reference it on
the "nat_extra_makefile_frag" variable.
It should now be easier to update the native dependencies of hosts in
this single file.
This has been tested on x86_64 without regressions.
gdb/ChangeLog:
2017-05-06 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in: Remove "@host_makefile_frag@". Add variables
NAT_FILE, NATDEPFILES, NAT_CDEPS, LOADLIBES, MH_CFLAGS, XM_CLIBS,
NAT_GENERATED_FILES, HAVE_NATIVE_GCORE_HOST. Add
"@nat_extra_makefile_frag@".
(Makefile): Remove dependency on "@frags@".
($(GNULIB_BUILDDIR)/Makefile): Likewise.
(data-directory/Makefile): Likewise.
* config/aarch64/linux.mh: Deleted; moved contents to
"gdb/configure.nat".
* config/alpha/alpha-linux.mh: Likewise.
* config/alpha/nbsd.mh: Likewise.
* config/arm/linux.mh: Likewise.
* config/arm/nbsdelf.mh: Likewise.
* config/i386/cygwin.mh: Likewise.
* config/i386/cygwin64.mh: Likewise.
* config/i386/darwin.mh: Likewise.
* config/i386/fbsd.mh: Likewise.
* config/i386/fbsd64.mh: Likewise.
* config/i386/go32.mh: Likewise.
* config/i386/i386gnu.mh: Likewise.
* config/i386/i386sol2.mh: Likewise.
* config/i386/linux.mh: Likewise.
* config/i386/linux64.mh: Likewise.
* config/i386/mingw.mh: Likewise.
* config/i386/mingw64.mh: Likewise.
* config/i386/nbsd64.mh: Likewise.
* config/i386/nbsdelf.mh: Likewise.
* config/i386/nto.mh: Likewise.
* config/i386/obsd.mh: Likewise.
* config/i386/obsd64.mh: Likewise.
* config/i386/sol2-64.mh: Likewise.
* config/ia64/linux.mh: Likewise.
* config/m32r/linux.mh: Likewise.
* config/m68k/linux.mh: Likewise.
* config/m68k/nbsdelf.mh: Likewise.
* config/m68k/obsd.mh: Likewise.
* config/m88k/obsd.mh: Likewise.
* config/mips/fbsd.mh: Likewise.
* config/mips/linux.mh: Likewise.
* config/mips/nbsd.mh: Likewise.
* config/mips/obsd64.mh: Likewise.
* config/pa/linux.mh: Likewise.
* config/pa/nbsd.mh: Likewise.
* config/pa/obsd.mh: Likewise.
* config/powerpc/aix.mh: Likewise.
* config/powerpc/fbsd.mh: Likewise.
* config/powerpc/linux.mh: Likewise.
* config/powerpc/nbsd.mh: Likewise.
* config/powerpc/obsd.mh: Likewise.
* config/powerpc/ppc64-linux.mh: Likewise.
* config/powerpc/spu-linux.mh: Likewise.
* config/s390/linux.mh: Likewise.
* config/sh/nbsd.mh: Likewise.
* config/sparc/fbsd.mh: Likewise.
* config/sparc/linux.mh: Likewise.
* config/sparc/linux64.mh: Likewise.
* config/sparc/nbsd64.mh: Likewise.
* config/sparc/nbsdelf.mh: Likewise.
* config/sparc/obsd64.mh: Likewise.
* config/sparc/sol2.mh: Likewise.
* config/tilegx/linux.mh: Likewise.
* config/vax/nbsdelf.mh: Likewise.
* config/vax/obsd.mh: Likewise.
* config/xtensa/linux.mh: Likewise.
* config/i386/i386gnu.mn: New file, with excerpts from
"config/i386/i386gnu.mh".
* configure: Regenerate.
* configure.ac: Rewrite code to use "gdb/configure.nat" instead of
*.mh files under "gdb/config".
* configure.nat: New file, with contents from the
"gdb/config/*/*.mh" files.
gdb/doc/ChangeLog:
2017-05-06 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile: Remove "@host_makefile_frag@".
GDB Administrator [Sat, 6 May 2017 00:00:53 +0000 (00:00 +0000)]
Automatic date update in version.in
Tim Wiederhake [Fri, 5 May 2017 06:20:50 +0000 (08:20 +0200)]
btrace: Fix memory leak in btrace_clear.
Pedro Alves [Fri, 5 May 2017 00:03:28 +0000 (01:03 +0100)]
gdb: Disable -Werror for -Wmaybe-uninitialized
Newer GCCs are triggering false-positive -Wmaybe-uninitialized
warnings around code that uses gdb::optional:
https://sourceware.org/ml/gdb-patches/2017-05/msg00118.html
Using std::optional wouldn't help, it triggers the same warnings:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=80635
Initializing the variables to quiet the warning would defeat the
purpose of gdb::optional. Making the optional ctor memset its storage
would be a pessimization. Wrapping gdb::optional's internals with
"#pragma GCC diagnostic push/ignored/pop" doesn't work, we'd have to
wrap uses of gdb::optional instead, which I think would get unwieldy
and ugly as we start using gdb::optional more and more.
The -Wmaybe-uninitialized warning is documented as producing false
positives (unlike -Wuninialized), so until we find a better
workaround, disable -Werror for this warning. You'll still see the
warning when building gdb, but it won't cause a build failure.
Tested by building with gcc 4.8.5, 5.3.1, and gcc trunk (
20170428).
gdb/ChangeLog:
2017-05-05 Pedro Alves <palves@redhat.com>
* warning.m4 (build_warnings): Add -Wno-error=maybe-uninitialized.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2017-05-05 Pedro Alves <palves@redhat.com>
* configure: Regenerate.
GDB Administrator [Fri, 5 May 2017 00:00:37 +0000 (00:00 +0000)]
Automatic date update in version.in
Pedro Alves [Thu, 4 May 2017 15:02:36 +0000 (16:02 +0100)]
Fix gdb.python/py-record-btrace-threads.exp with Python 3
Fix several instances of:
...
python print not f1calls
File "<string>", line 1
print not f1calls
^
SyntaxError: Missing parentheses in call to 'print'
Error while executing Python code.
(gdb) FAIL: gdb.python/py-record-btrace-threads.exp: thread=1: checking thread 1: python print not f1calls
...
gdb/testsuite/ChangeLog:
2017-05-04 Pedro Alves <palves@redhat.com>
* gdb.python/py-record-btrace-threads.exp (check_insn_for_thread):
Add parens to print call for Python 3.
Pedro Alves [Thu, 4 May 2017 11:46:44 +0000 (12:46 +0100)]
RAII-fy make_cleanup_restore_current_thread & friends
After all the make_cleanup_restore_current_thread fixing, I thought
I'd convert that and its relatives (which are all cleanups) to RAII
classes.
scoped_restore_current_pspace_and_thread was put in a separate file to
avoid a circular dependency.
Tested on x86-64 Fedora 23, native and gdbserver.
gdb/ChangeLog:
2017-05-04 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add progspace-and-thread.c.
(HFILES_NO_SRCDIR): Add progspace-and-thread.h.
(COMMON_OBS): Add progspace-and-thread.o.
* breakpoint.c: Include "progspace-and-thread.h".
(update_inserted_breakpoint_locations)
(insert_breakpoint_locations, create_longjmp_master_breakpoint):
Use scoped_restore_current_pspace_and_thread.
(create_std_terminate_master_breakpoint): Use
scoped_restore_current_program_space.
(remove_breakpoint): Use scoped_restore_current_pspace_and_thread.
(print_breakpoint_location): Use
scoped_restore_current_program_space.
(bp_loc_is_permanent): Use
scoped_restore_current_pspace_and_thread.
(resolve_sal_pc): Use scoped_restore_current_pspace_and_thread.
(download_tracepoint_locations): Use
scoped_restore_current_pspace_and_thread.
(breakpoint_re_set): Use scoped_restore_current_pspace_and_thread.
* exec.c (exec_close_1): Use scoped_restore_current_program_space.
(enum step_over_calls_kind): Moved from inferior.h.
(class scoped_restore_current_thread): New class.
* gdbthread.h (make_cleanup_restore_current_thread): Delete
declaration.
(scoped_restore_current_thread): New class.
* infcmd.c: Include "common/gdb_optional.h".
(continue_1, proceed_after_attach): Use
scoped_restore_current_thread.
(notice_new_inferior): Use scoped_restore_current_thread.
* inferior.c: Include "progspace-and-thread.h".
(restore_inferior, save_current_inferior): Delete.
(add_inferior_command, clone_inferior_command): Use
scoped_restore_current_pspace_and_thread.
* inferior.h (scoped_restore_current_inferior): New class.
* infrun.c: Include "progspace-and-thread.h" and
"common/gdb_optional.h".
(follow_fork_inferior): Use
scoped_restore_current_pspace_and_thread.
(scoped_restore_exited_inferior): New class.
(handle_vfork_child_exec_or_exit): Use
scoped_restore_exited_inferior,
scoped_restore_current_pspace_and_thread,
scoped_restore_current_thread and scoped_restore.
(fetch_inferior_event): Use scoped_restore_current_thread.
* linespec.c (decode_line_full, decode_line_1): Use
scoped_restore_current_program_space.
* mi/mi-main.c: Include "progspace-and-thread.h".
(exec_continue): Use scoped_restore_current_thread.
(mi_cmd_exec_run): Use scoped_restore_current_pspace_and_thread.
(mi_cmd_trace_frame_collected): Use scoped_restore_current_thread.
* proc-service.c (ps_pglobal_lookup): Use
scoped_restore_current_program_space.
* progspace-and-thread.c: New file.
* progspace-and-thread.h: New file.
* progspace.c (release_program_space, clone_program_space): Use
scoped_restore_current_program_space.
(restore_program_space, save_current_program_space)
(save_current_space_and_thread): Delete.
(switch_to_program_space_and_thread): Moved to
progspace-and-thread.c.
* progspace.h (save_current_program_space)
(save_current_space_and_thread): Delete declarations.
(scoped_restore_current_program_space): New class.
* remote.c (remote_btrace_maybe_reopen): Use
scoped_restore_current_thread.
* symtab.c: Include "progspace-and-thread.h".
(skip_prologue_sal): Use scoped_restore_current_pspace_and_thread.
* thread.c (print_thread_info_1): Use
scoped_restore_current_thread.
(struct current_thread_cleanup): Delete.
(do_restore_current_thread_cleanup)
(restore_current_thread_cleanup_dtor): Rename/convert both to ...
(scoped_restore_current_thread::~scoped_restore_current_thread):
... this new dtor.
(make_cleanup_restore_current_thread): Rename/convert to ...
(scoped_restore_current_thread::scoped_restore_current_thread):
... this new ctor.
(thread_apply_all_command): Use scoped_restore_current_thread.
(thread_apply_command): Use scoped_restore_current_thread.
* tracepoint.c (tdump_command): Use scoped_restore_current_thread.
* varobj.c (value_of_root_1): Use scoped_restore_current_thread.
Pedro Alves [Thu, 4 May 2017 13:43:34 +0000 (14:43 +0100)]
make_cleanup_restore_current_thread: Look up thread earlier
The unconditional is_stopped call already asserts that the thread exists.
gdb/ChangeLog:
2017-05-04 Pedro Alves <palves@redhat.com>
* thread.c (make_cleanup_restore_current_thread): Move
find_thread_ptid call before the is_stopped call. Assert that the
thread is found. Replace is_stopped call by checking the thread's
state directly. Remove unnecessary NULL-thread check.
Pedro Alves [Thu, 4 May 2017 14:14:37 +0000 (15:14 +0100)]
Fix get_core_register_section leak, introduce thread_section_name
This plugs a leak introduced in the previous change to
get_core_register_section, which removed an xfree call that is
actually necessary because the 'section_name' local is static.
From [1] it looks like the reason the variable was made static to
begin with, was just "laziness" to avoid having to think about freeing
it on every function return path:
https://sourceware.org/ml/gdb-patches/2005-03/msg00237.html
The easiest to fix that nowadays is to use a std::string.
I don't see a need to xstrdup the section name in the single-threaded
case though, and also there's more than one place that computes a
multi-threaded section name in the same way. So put the section name
computation in a wrapper class with state.
gdb/ChangeLog:
2017-05-04 Pedro Alves <palves@redhat.com>
* corelow.c (thread_section_name): New class.
(get_core_register_section, get_core_siginfo): Use it.
Kito Cheng [Wed, 5 Apr 2017 12:58:28 +0000 (20:58 +0800)]
RISC-V: Fix disassemble for c.li, c.andi and c.addiw
ChangeLog
2017-05-03 Kito Cheng <kito.cheng@gmail.com>
* riscv-dis.c (print_insn_args): Handle 'Co' operands.
Andreas Arnez [Thu, 4 May 2017 09:06:10 +0000 (11:06 +0200)]
Remove some superfluous code in corelow.c
In corelow.c I stumbled upon an extra semicolon and an xfree of a NULL
pointer. Remove them.
gdb/ChangeLog:
* corelow.c (sniff_core_bfd): Remove extra semicolon.
(get_core_register_section): Remove xfree of NULL pointer.
Senthil Kumar Selvaraj [Mon, 24 Apr 2017 09:47:14 +0000 (15:17 +0530)]
Fix PR21404 - assertion fail when calculating symbol size
Fix a host of problems related to adjustment of
symbol values and sizes when relaxing for avr.
1. Adjust symbol size first before adjusting symbol
value. Otherwise, a symbol whose value just got adjusted to the
relaxed address also ends up getting resized. See pr21404-1.s.
2. Reduce symbol sizes only if their span is below an
alignment boundary. Otherwise, the size gets decremented once when the
actual instruction is relaxed and padding bytes are added, and again
when the padding bytes are deleted (if padding ends up being unnecessary).
pr21404-2.s addresses that, and this bug is really the root cause of PR21404.
3. Adjust all symbol values before an alignment boundary.
Previous code did not adjust symbol values if they fell in the
would-be padded area, resulting in incorrect symbol values in some
cases (see pr21404-3.s).
4. Increase symbol sizes if alignment directives require so.
As pr21404-4.s shows
.global nonzero_sym
L1:
jmp L1
nonzero_sym:
nop
nop
.p2align 2
.size nonzero_sym, .-nonzero_sym
The two nops satisfy the 4 byte alignment at assembly time and
therefore the size of nonzero_sym is 4. Relaxation shortens
the 4 byte jmp to a 2 byte rjmp, and to satisfy 4 byte alignment
the code places 2 extra padding bytes after the nops, increasing
nonzero_sym's size by 2. This wasn't handled before.
If the assembly code does not have any align directives, then the
boundary is the section size, and symbol values and sizes == boundary
should also get adjusted. To handle that case, add a did_pad variable
and use that to determine whether it should use < boundary or <= boundary.
Also get rid of reloc_toaddr, which is now redundant. toaddr is now not
adjusted to handle the above case - the newly added
did_pad variable does the job.
pr21404-{5,6,7,8} are the same testcases written for local symbols, as
the code handles them slightly differently.
GDB Administrator [Thu, 4 May 2017 00:00:55 +0000 (00:00 +0000)]
Automatic date update in version.in
Maciej W. Rozycki [Wed, 3 May 2017 19:43:10 +0000 (20:43 +0100)]
MIPS16/GAS: Relax 32-bit non-PIC PC-relative synthetic instructions
Implement the relaxation of MIPS16 PC-relative synthetic LA, DLA, LW and
LD instructions to an equivalent sequence of instructions produced where
the address operand requested is out of range, absolute or requires
linker relocation, for ABIs that use 32-bit addressing and non-PIC code.
The sequence generated uses the register specified for the destination
operand as a temporary and begins with LI to load the high 16-bit part
of the address, then continues with SLL by 16 bits to move that part
into place and finally completes with a suitable operation corresponding
to the synthetic instruction used, one of: 2-argument ADDIU, 2-argument
DADDIU, absolute LW, and absolute LD respectively, providing the low
16-bit part of the address. All instructions use the extended encoding.
As a special exception accept absolute addresses for relaxation even in
PIC code.
For example:
la $2, 0x12345678
produces code as:
li $2, 0x1234
sll $2, $2, 16
addiu $2, 0x5678
would.
Where linker relocation is required emit an R_MIPS16_HI16 relocation on
the initial LI instruction and an R_MIPS16_LO16 relocation on the final
operation.
For example (where `foo' is not local):
lw $3, foo
produces code as:
li $3, %hi(foo)
sll $3, $3, 16
lw $3, %lo(foo)($3)
would.
Emit assembly warnings as appropriate where this new relaxation triggers
in the `nomacro' mode or for an instruction manually placed in a branch
delay slot in the `noreorder' mode. Refrain from relaxation where an
explicit instruction size suffix has been used and in the `noautoextend'
mode.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `pic', `sym32' and
`nomacro' flags.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO):
New macros.
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED): Shift bits.
(RELAX_MIPS16_MACRO, RELAX_MIPS16_MARK_MACRO)
(RELAX_MIPS16_CLEAR_MACRO): New macros.
(append_insn): Pass `mips_pic', HAVE_32BIT_SYMBOLS and
`mips_opts.warn_about_macros' settings to RELAX_MIPS16_ENCODE.
(mips16_macro_frag): New function.
(md_estimate_size_before_relax): Handle HI16/LO16 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
* testsuite/gas/mips/mips16@relax-swap3.d: Remove error output,
add dump patterns.
* testsuite/gas/mips/mips16e@relax-swap3.d: New test
subarchitecture.
* testsuite/gas/mips/micromips@relax-swap3.d: Remove trailing
NOP padding.
* testsuite/gas/mips/mips16-pcrel-reloc-2.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-reloc-3.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-reloc-6.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-reloc-7.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-addend-2.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-addend-3.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-absolute.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-absolute-1.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16@relax-swap3.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-reloc-2.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-reloc-3.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-reloc-6.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-reloc-7.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-addend-2.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-addend-3.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-absolute.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-absolute-1.l: Remove file.
* testsuite/gas/mips/relax-swap3.s: Adjust trailing padding.
* testsuite/gas/mips/mips16-pcrel-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-pic-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-pic-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-n32-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-n32-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-sym32-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-sym32-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-delay-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-delay-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-7.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-pic-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-pic-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n32-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n32-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-sym32-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-sym32-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-7.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n32-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n32-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-sym32-4.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-sym32-6.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n32-4.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n32-6.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-4.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-6.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-sym32-4.d:
New test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-sym32-6.d:
New test.
* testsuite/gas/mips/mips16-pcrel-0.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-1.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-2.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-3.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-4.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-5.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-delay-0.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-delay-1.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-addend-8.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-addend-9.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-absolute-4.l: New stderr
output.
* testsuite/gas/mips/mips16-pcrel-absolute-6.l: New stderr
output.
* testsuite/gas/mips/mips16-pcrel-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-1.s: New test source.
* testsuite/gas/mips/mips16-pcrel-2.s: New test source.
* testsuite/gas/mips/mips16-pcrel-3.s: New test source.
* testsuite/gas/mips/mips16-pcrel-4.s: New test source.
* testsuite/gas/mips/mips16-pcrel-5.s: New test source.
* testsuite/gas/mips/mips16-pcrel-delay-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-delay-1.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-4.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-5.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-6.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-7.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-8.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-9.s: New test source.
* testsuite/gas/mips/mips16-pcrel-absolute-2.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-3.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-4.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-5.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-6.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-7.s: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/mips16-pcrel-0.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-1.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-addend-2.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-addend-6.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n32-0.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n32-1.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n64-sym32-0.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n64-sym32-1.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Keith Seitz [Wed, 3 May 2017 19:41:09 +0000 (12:41 -0700)]
Make sure malloc is linked into gdb.cp/oranking.cc.
On some platforms, e.g., arm-eabi-none, we need to make certain that
malloc is linked into the program because the test suite uses function
calls requiring malloc:
(gdb) p foo101("abc")
evaluation of this expression requires the program to have a function "malloc".
gdb/testsuite/ChangeLog
* gdb.cp/oranking.cc (dummy): New function to grab malloc.
(main): Call it.
H.J. Lu [Wed, 3 May 2017 14:40:51 +0000 (07:40 -0700)]
Adjust testsuite/ld-elf/pr21384.d
Adjust testsuite/ld-elf/pr21384.d to accommodate additional dynamic
symbols on some targets.
* testsuite/ld-elf/pr21384.d: Adjusted to accommodate
additional dynamic symbols on some targets.
Alan Hayward [Wed, 3 May 2017 13:51:40 +0000 (14:51 +0100)]
Remove MAX_REGISTER_SIZE from frv-linux-tdep.c
gdb/
* frv-linux-tdep.c (frv_linux_supply_gregset): Use raw_supply_zeroed.
* regcache.c (regcache::raw_supply_zeroed): New function.
* regcache.h (regcache::raw_supply_zeroed): New declaration.
Simon Marchi [Wed, 3 May 2017 13:21:27 +0000 (09:21 -0400)]
gdbarch.sh: Remove commented out TARGET_CHAR_BIT definition
As Pedro commented on the patch "Change field separator in gdbarch.sh",
this commented out definition is probably not useful and should be
removed. It has been commented out for basically forever, and it
probably serves the same intent as addressable_memory_unit_size.
gdb/ChangeLog:
* gdbarch.sh: Remove commented out definition of
TARGET_CHAR_BIT.
* gdbarch.h: Re-generate.
Sergio Durigan Junior [Wed, 3 May 2017 13:13:15 +0000 (09:13 -0400)]
Regenerate gdb/{,gdbserver/}configure (for commit
be628ab814f1c90e185d7482d27aa8a991ab5837)
On commit
be628ab814f1c90e185d7482d27aa8a991ab5837, both
common/common.m4 was modified in order to check for the presence of
'termios.h', 'termio.h' and 'sgtty.h'. However, I forgot to
regenerate both gdb/configure and gdb/gdbserver/configure. This
commit does that.
gdb/ChangeLog:
2017-05-03 Sergio Durigan Junior <sergiodj@redhat.com>
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2017-05-03 Sergio Durigan Junior <sergiodj@redhat.com>
* configure: Regenerate.
Nick Clifton [Wed, 3 May 2017 08:52:01 +0000 (09:52 +0100)]
Prevent a seg-fault in the assembler when provided with a bogus input source file.
PR gas/20941
* symbols.c (snapshot_symbol): Handle the case where
resolve_expression returns a local symbol.
GDB Administrator [Wed, 3 May 2017 00:00:41 +0000 (00:00 +0000)]
Automatic date update in version.in
Maciej W. Rozycki [Tue, 2 May 2017 23:05:15 +0000 (00:05 +0100)]
MIPS16/GAS: Fix absolute references with PC-relative synthetic instructions
Complement commit
88a7ef168927 ("MIPS16/GAS: Restore unsupported
relocation diagnostics") and also propagate constant expressions, either
already reduced from absolute symbol references or created from literals
in the first place, used as a PC-relative operand with the MIPS16 LA,
LW, DLA and LD synthetic instructions to relaxation, matching the way
forward absolute symbol references have been handled as from the commit
referred and letting relaxation produce any necessary relocations, if
possible, for the absolute value requested to be reproduced at the run
time.
Call `symbol_append' for any expression symbol created for the purpose
of MIPS16 relaxation as with constant expressions now propagated from
earlier on such symbols may make it through and have R_MIPS16_PC16_S1
relocations emitted against, and therefore need to appear in the symbol
table produced.
gas/
* config/tc-mips.c (append_insn): Call `symbol_append' for any
expression symbol created for MIPS16 relaxation.
(match_mips16_insn): Don't encode a constant value as an
immediate with a PC-relative operand.
* testsuite/gas/mips/mips16-pcrel-absolute-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-2.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-1.d: New
test.
* testsuite/gas/mips/mips16-branch-absolute-n32-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n32-2.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n32-1.d: New
test.
* testsuite/gas/mips/mips16-branch-absolute-n64-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n64-2.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n64-1.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-1.l: New stderr
output.
* testsuite/gas/mips/mips16-pcrel-absolute-1.s: New test source.
* testsuite/gas/mips/mips16-branch-absolute-1.s: New test
source.
* testsuite/gas/mips/mips16-branch-absolute-2.s: New test
source.
* testsuite/gas/mips/mips16-branch-absolute-addend-1.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/mips16-branch-absolute-1.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-2.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-1.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n32-1.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n32-2.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-n32-1.d:
New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n64-1.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n64-2.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-n64-1.d:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
H.J. Lu [Tue, 2 May 2017 23:00:49 +0000 (16:00 -0700)]
x86: Add -Wl,--no-as-needed to some TLS tests
* testsuite/ld-i386/tls.exp: Add -Wl,--no-as-needed to
"TLS without PLT (1)" and "TLS without PLT (3)".
* testsuite/ld-x86-64/tls.exp: Add -Wl,--no-as-needed to
to "TLS without PLT (3)".
Michael Clark [Thu, 27 Apr 2017 04:08:46 +0000 (16:08 +1200)]
RISC-V: Change CALL macro to use ra as the temporary address register
e.g.
1: auipc ra, %pcrel_hi(symbol)
jalr ra, %pcrel_lo(1b)(ra)
The use of ra instead of t1 for address construction provides an
opportunity for a microarchitecture to elide the write of the
destination address, and instead read the target address as an
immediate spread across the fused auipc+jalr pair. The link
register ra in the jalr overwrites the target address temporary.
2017-05-01 Michael Clark <michaeljclark@mac.com>
* riscv-opc.c (riscv_opcodes) <call>: Use RA not T1 as a temporary
register.
Palmer Dabbelt [Mon, 1 May 2017 17:26:32 +0000 (10:26 -0700)]
RISC-V: Allow 32-bit BFD to handle 64-bit objects
We've been telling people that the riscv32-* and riscv64-* toolchains
are exactly the same, but it turns out we were lying: the riscv32-* BFD
doesn't handle 64-bit objects. This fixes that difference, so the ports
are actually the same.
bfd/ChangeLog
2017-05-01 Palmer Dabbelt <palmer@dabbelt.com>
* config.bfd (riscv32-*): Enable rv64.
H.J. Lu [Tue, 2 May 2017 20:54:22 +0000 (13:54 -0700)]
Add a test for PR ld/21384
PR ld/21384
* testsuite/ld-elf/pr21384.d: New file.
* testsuite/ld-elf/pr21384.dl: Likewise.
* testsuite/ld-elf/pr21384.ld: Likewise.
* testsuite/ld-elf/pr21384.s: Likewise.
H.J. Lu [Tue, 2 May 2017 19:16:26 +0000 (12:16 -0700)]
Cast relcount to unsigned long when comparing with sec->reloc_count
The type of relcount is long and the type of sec->reloc_count is
unsigned int. On 32-bit hosts, GCC issues an error:
objcopy.c:2144:20: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
if (relcount > sec->reloc_count)
Cast relcount to unsigned long to silence GCC.
* objcopy.c (merge_gnu_build_notes): Cast relcount to unsigned
long when comparing with sec->reloc_count.
Simon Marchi [Tue, 2 May 2017 18:25:43 +0000 (14:25 -0400)]
solib-target: Remove local variables
Now that we use std::vector, these local variables are not very useful.
They're not much shorter than the expressions they stand for.
gdb/ChangeLog:
* solib-target.c (solib_target_relocate_section_addresses):
Remove num_section_bases, num_bases, segment_bases variables.
Simon Marchi [Tue, 2 May 2017 17:30:09 +0000 (13:30 -0400)]
Remove definition of VEC (CORE_ADDR)
gdb/ChangeLog:
* common/gdb_vecs.h (DEF_VEC_I (CORE_ADDR)): Remove.
Simon Marchi [Tue, 2 May 2017 17:30:08 +0000 (13:30 -0400)]
Use std::vector in lm_info_target
Replace the two VEC fields with std::vector.
gdb/ChangeLog:
* solib-target.c: Include <vector>
(struct lm_info_target) <~lm_info_target>: Remove.
<segment_bases, section_bases>: Change type to
std::vector<CORE_ADDR>.
(library_list_start_segment, library_list_start_section,
library_list_end_library,
solib_target_relocate_section_addresses): Adjust.
Simon Marchi [Tue, 2 May 2017 17:30:07 +0000 (13:30 -0400)]
Change return type of gdbarch_software_single_step to vector<CORE_ADDR>
This is a relatively straightforward patch that changes
gdbarch_software_single_step so it returns an std::vector<CORE_ADDR>
instead of a VEC (CORE_ADDR).
gdb/ChangeLog:
* gdbarch.sh (software_single_step): Change return type to
std::vector<CORE_ADDR>.
* gdbarch.c, gdbarch.h: Re-generate.
* arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw):
Adjust.
(arm_deal_with_atomic_sequence_raw): Adjust.
(thumb_get_next_pcs_raw): Adjust.
(arm_get_next_pcs_raw): Adjust.
(arm_get_next_pcs): Adjust.
* arch/arm-get-next-pcs.h (arm_get_next_pcs): Adjust.
* aarch64-tdep.c (aarch64_software_single_step): Adjust.
* alpha-tdep.c (alpha_deal_with_atomic_sequence): Adjust.
(alpha_software_single_step): Adjust.
* alpha-tdep.h (alpha_software_single_step): Adjust.
* arm-linux-tdep.c (arm_linux_software_single_step): Adjust.
* arm-tdep.c (arm_software_single_step): Adjust.
(arm_breakpoint_kind_from_current_state): Adjust.
* arm-tdep.h (arm_software_single_step): Adjust.
* breakpoint.c (insert_single_step_breakpoint): Adjust.
* cris-tdep.c (cris_software_single_step): Adjust.
* mips-tdep.c (mips_deal_with_atomic_sequence): Adjust.
(micromips_deal_with_atomic_sequence): Adjust.
(deal_with_atomic_sequence): Adjust.
(mips_software_single_step): Adjust.
* mips-tdep.h (mips_software_single_step): Adjust.
* moxie-tdep.c (moxie_software_single_step): Adjust.
* nios2-tdep.c (nios2_software_single_step): Adjust.
* ppc-tdep.h (ppc_deal_with_atomic_sequence): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* s390-linux-tdep.c (s390_software_single_step): Adjust.
* sparc-tdep.c (sparc_software_single_step): Adjust.
* spu-tdep.c (spu_software_single_step): Adjust.
* tic6x-tdep.c (tic6x_software_single_step): Adjust.
gdb/gdbserver/ChangeLog:
* linux-arm-low.c (arm_gdbserver_get_next_pcs): Adjust to
software_single_step change of return type to
std::vector<CORE_ADDR>.
* linux-low.c (install_software_single_step_breakpoints):
Likewise.
* linux-low.h (install_software_single_step_breakpoints):
Likewise.
Simon Marchi [Tue, 2 May 2017 17:30:07 +0000 (13:30 -0400)]
Change field separator in gdbarch.sh
The fields in the description of the gdbarch interface are separated
using colons. That becomes a problem if we want to use things like
std::vector in it. This patch changes the field separator to use
semicolons instead.
I think there's very little chance we'll ever want to use a semicolon in
one of the fields, but if you think another character would be more
appropriate, let me know.
gdb/ChangeLog:
* gdbarch.sh: Use semi-colon as field separator instead of colon.
* gdbarch.h: Re-generate.
Nick Clifton [Tue, 2 May 2017 15:54:53 +0000 (16:54 +0100)]
Don't merge notes when the relocs associated with them cannot be reliably deleted.
* objcopy.c (merge_gnu_build_notes): Disable merge if there are
more internal relocs than external relocs.
Alan Modra [Tue, 2 May 2017 12:26:43 +0000 (21:56 +0930)]
PR 21384, --dynamic-list regression with
f02cb058
The commit to "Always descend into output section statements in
lang_do_assignments" meant that linker script symbols were not
bfd_link_hash_new when ld called bfd_elf_record_link_assignment.
This patch corrects that problem by testing h->non_elf instead.
PR 21384
* elflink.c (bfd_elf_link_mark_dynamic_symbol): Test h->non_elf
rather than h->root.type == bfd_link_hash_new.
(bfd_elf_record_link_assignment): Similarly, call
bfd_elf_link_mark_dynamic_symbol when h->non_elf.
Maciej W. Rozycki [Tue, 2 May 2017 10:53:30 +0000 (11:53 +0100)]
MIPS16/opcodes: Keep the LSB of PC-relative offsets in disassembly
Correct the disassembly of the PC-relative immediate argument of the
MIPS16 synthetic LA, LW, DLA and LD instructions and do not mask the
LSB, which in this case is a part of the data address rather than the
ISA bit and has to be fully presented.
opcodes/
* mips-dis.c (print_insn_arg): Only clear the ISA bit for jumps
and branches and not synthetic data instructions.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.d: Adjust the
disassembly of PC-relative LA and LW synthetic instructions.
Nick Clifton [Tue, 2 May 2017 10:54:53 +0000 (11:54 +0100)]
Prevent memory exhaustion from a corrupt PE binary with an overlarge number of relocs.
PR 21440
* objdump.c (dump_relocs_in_section): Check for an excessive
number of relocs before attempting to dump them.
Tim Wiederhake [Tue, 2 May 2017 09:35:54 +0000 (11:35 +0200)]
Python: Introduce gdb.Instruction class
This adds a generic instruction class to Python and has gdb.RecordInstruction
inherit from it.
Tim Wiederhake [Tue, 2 May 2017 09:35:54 +0000 (11:35 +0200)]
Python: Move and rename gdb.BtraceFunction
Remove gdb.BtraceFunctionCall and replace by gdb.FunctionSegment. Additionally,
rename prev_segment and next_segment to prev and next.
Tim Wiederhake [Tue, 2 May 2017 09:35:54 +0000 (11:35 +0200)]
Python: Move and rename gdb.BtraceInstruction
Remove gdb.BtraceInstruction and replace by gdb.RecordInstruction.
Tim Wiederhake [Tue, 2 May 2017 09:35:54 +0000 (11:35 +0200)]
Python: Introduce gdb.RecordGap class
As discussed here: https://sourceware.org/ml/gdb-patches/2017-04/msg00157.html
A gap is not an instruction and it should not pretend to be one.
gdb.Record.instruction_history is now a list of gdb.RecordInstruction and
gdb.RecordGap objects. This allows the user to deal with Gaps in the record
in a more sane way.
Tim Wiederhake [Tue, 2 May 2017 09:35:54 +0000 (11:35 +0200)]
Python: Remove ptid from gdb.Record interface
As discussed here: https://sourceware.org/ml/gdb-patches/2017-04/msg00166.html
Tim Wiederhake [Tue, 2 May 2017 09:35:54 +0000 (11:35 +0200)]
Python: Use correct ptid in btrace recording
The user would always get the instruction_history and function_call_history
objects of the current thread, not the thread for which the gdb.Record object
was created.
The attached testcase fails without this patch and passes with the patch.
Tim Wiederhake [Tue, 2 May 2017 09:35:54 +0000 (11:35 +0200)]
Python: Fix indentation in py-record-btrace.c
Bernd Edlinger [Tue, 2 May 2017 09:28:09 +0000 (10:28 +0100)]
Fix value in comment of disassembled ARM type A opcodes.
* arm-dis.c (print_insn_thumb32): Fix value_in_comment.
GDB Administrator [Tue, 2 May 2017 00:00:39 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Mon, 1 May 2017 18:02:55 +0000 (11:02 -0700)]
x86: Run GNU2 TLS tests with working GNU2 TLS support
Check if GNU2 TLS really works before running GNU2 TLS tests.
* testsuite/ld-i386/tls.exp: Run GNU2 TLS tests only if there
is working GNU2 TLS support.
* testsuite/ld-x86-64/tls.exp: Likewise.
* testsuite/lib/ld-lib.exp (check_gnu2_tls_available): New proc.
Joel Brobecker [Mon, 1 May 2017 16:59:15 +0000 (09:59 -0700)]
gdb/MAINTAINERS: Move Daniel J and Mark to the Past Maintainers section.
gdb/ChangeLog:
* MAINTAINERS: Move Daniel Jacobowitz and Mark Kettenis to
the past maintainers section.
Alan Modra [Mon, 1 May 2017 04:41:27 +0000 (14:11 +0930)]
merge_gnu_build_notes reloc deletion
If moving relocs, the next reloc to look at is at the same location.
* objcopy.c (merge_gnu_build_notes): Correct code deleting
relocs.
GDB Administrator [Mon, 1 May 2017 00:00:35 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 30 Apr 2017 00:00:31 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Sat, 29 Apr 2017 05:18:16 +0000 (14:48 +0930)]
PR21432, buffer overflow in perform_relocation
The existing reloc offset range tests didn't catch small negative
offsets less than the size of the reloc field.
PR 21432
* reloc.c (reloc_offset_in_range): New function.
(bfd_perform_relocation, bfd_install_relocation): Use it.
(_bfd_final_link_relocate): Likewise.
Sergio Durigan Junior [Fri, 31 Mar 2017 17:24:36 +0000 (13:24 -0400)]
Make environ.exp run on all platforms (and create info-program.exp)
This has been on my TODO list for a while. There's a really old bug
about this (PR testsuite/8595), and there was no reason for
environ.exp to be specific for hppa* targets. So this patch removes
this constraint, modernizes the testcase, and cleans up some things.
Most of the tests remained, and some were rewritten (especially the
one that checks if "show environment" works, which is something kind
of hard to do).
As a bonus, I'm adding a separated info-program.exp file containing
all the tests related to "info program" that were present on
environ.exp.
Tested locally, everything still passes.
gdb/testsuite/ChangeLog:
2017-04-28 Sergio Durigan Junior <sergiodj@redhat.com>
PR testsuite/8595
* gdb.base/environ.exp: Make test available in all architectures.
Move bits related to "info program" testing to
gdb.base/info-program.exp. Rewrite tests to use the two new
procedures mentione below.
(test_set_show_env_var) New procedure.
(test_set_show_env_var_equal): Likewise.
* gdb.base/info-program.exp: New file.
GDB Administrator [Sat, 29 Apr 2017 00:00:38 +0000 (00:00 +0000)]
Automatic date update in version.in
Yao Qi [Fri, 28 Apr 2017 21:48:42 +0000 (22:48 +0100)]
Remove cleanup in get_return_value
With regcache ctor, we can use it to create local object in
get_return_value (), so that the cleanup can be removed.
gdb:
2017-04-28 Yao Qi <yao.qi@linaro.org>
* infcmd.c (get_return_value): Use regcache ctor, and remove
cleanup.
Yao Qi [Fri, 28 Apr 2017 21:48:42 +0000 (22:48 +0100)]
Use tag dispatch regcache ctor in regcache_dup
This patch adds a tag dispatch ctor to create read-only regcache from
a write-through regcache, also this patch deletes copy ctor and
assignment operator.
gdb:
2017-04-28 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
* regcache.c (regcache::regcache): New tag dispatch ctor.
(do_cooked_read): Moved above.
(regcache_dup): Use the tag dispatch ctor..
* regcache.h (regcache): Declare ctor, delete copy ctor and
assignment operator, remove friend regcache_dup.
Yao Qi [Fri, 28 Apr 2017 21:48:42 +0000 (22:48 +0100)]
Simplify regcache_dup
regcache_dup, in fact, is to create a readonly regcache from a
non-readonly regcache. This patch adds an assert that src is not
readonly.
gdb:
2017-04-28 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache_dup): Assert !src->m_readonly_p and
call method save instead of regcache_cpy.
* regcache.h (struct regcache): Make regcache_dup a friend.
Yao Qi [Fri, 28 Apr 2017 21:48:42 +0000 (22:48 +0100)]
Class-fy regcache
This patch moves regcache declaration to regcache.h, and converts
regcache apis to member functions, for example, regcache_invalidate
is changed to regcache::invalidate.
This patch also add "m_" prefix to these private fields.
gdb:
2017-04-28 Yao Qi <yao.qi@linaro.org>
* regcache.c (struct regcache): Move to regcache.h
(regcache::arch): New method.
(regcache_get_ptid): Update.
(get_regcache_arch): Call arch method.
(get_regcache_aspace): Call method aspace.
(register_buffer): Change it to method.
(regcache_save): Change it to regcache::save.
(regcache_restore): Likewise.
(regcache_cpy_no_passthrough): Remove the declaration.
(regcache_cpy): Call methods restore and cpy_no_passthrough.
(regcache_cpy_no_passthrough): Change it to method
cpy_no_passthrough.
(regcache_register_status): Change it to method
get_register_status.
(regcache_invalidate): Change it to method invalidate.
(regcache_thread_ptid_changed): Use methods ptid and set_ptid.
(regcache_raw_update): Change it to method raw_update.
(regcache_raw_read): Likewise.
(regcache_raw_read_signed): Likewise.
(regcache_raw_read_unsigned): Likewise.
(regcache_raw_write_signed): Likewise.
(regcache_raw_write_unsigned): Likewise.
(regcache_cooked_read): Likewise.
(regcache_cooked_read_value): Likewise.
(regcache_cooked_read_signed): Likewise.
(regcache_cooked_read_unsigned): Likewise.
(regcache_cooked_write_signed): Likewise.
(regcache_cooked_write_unsigned): Likewise.
(regcache_raw_set_cached_value): Likewise.
(regcache_raw_write): Likewise.
(regcache_cooked_write): Likewise.
(regcache_xfer_part): Likewise.
(regcache_raw_read_part): Likewise.
(regcache_raw_write_part): Likewise.
(regcache_cooked_read_part): Likewise.
(regcache_cooked_write_part): Likewise.
(regcache_raw_supply): Likewise.
(regcache_raw_collect): Likewise.
(regcache_transfer_regset): Likewise.
(regcache_supply_regset): Likewise.
(regcache_collect_regset): Likewise.
(regcache_debug_print_register): Likewise.
(enum regcache_dump_what): Move it to regcache.h.
(regcache_dump): Change it to method dump.
* regcache.h (enum regcache_dump_what): New.
(class regcache): New.
* target.c (target_fetch_registers): Call method
debug_print_register.
(target_store_registers): Likewise.
Simon Marchi [Fri, 28 Apr 2017 21:16:18 +0000 (17:16 -0400)]
Class-ify lm_info_windows
This patch makes lm_info_windows a "real" class. It initializes the field
and replaces XCNEW/xfree with new/delete.
gdb/ChangeLog:
* windows-nat.c (struct lm_info_windows): Initialize field.
(windows_make_so): Allocate lm_info_windows with new.
(windows_free_so): Free lm_info_windows with delete.