net: unix: allow bind to fail on mutex lock

[ Upstream commit 37ab4fa7844a044dc21fde45e2a0fc2f3c3b6490 ]

This is similar to the set_peek_off patch where calling bind while the
socket is stuck in unix_dgram_recvmsg() will block and cause a hung task
spew after a while.

This is also the last place that did a straightforward mutex_lock(), so
there shouldn't be any more of these patches.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netvsc: don't flush peers notifying work during setting mtu

[ Upstream commit 50dc875f2e6e2e04aed3b3033eb0ac99192d6d02 ]

There's a possible deadlock if we flush the peers notifying work during setting
mtu:

[   22.991149] ======================================================
[   22.991173] [ INFO: possible circular locking dependency detected ]
[   22.991198] 3.10.0-54.0.1.el7.x86_64.debug #1 Not tainted
[   22.991219] -------------------------------------------------------
[   22.991243] ip/974 is trying to acquire lock:
[   22.991261]  ((&(&net_device_ctx->dwork)->work)){+.+.+.}, at: [<ffffffff8108af95>] flush_work+0x5/0x2e0
[   22.991307]
but task is already holding lock:
[   22.991330]  (rtnl_mutex){+.+.+.}, at: [<ffffffff81539deb>] rtnetlink_rcv+0x1b/0x40
[   22.991367]
which lock already depends on the new lock.

[   22.991398]
the existing dependency chain (in reverse order) is:
[   22.991426]
-> #1 (rtnl_mutex){+.+.+.}:
[   22.991449]        [<ffffffff810dfdd9>] __lock_acquire+0xb19/0x1260
[   22.991477]        [<ffffffff810e0d12>] lock_acquire+0xa2/0x1f0
[   22.991501]        [<ffffffff81673659>] mutex_lock_nested+0x89/0x4f0
[   22.991529]        [<ffffffff815392b7>] rtnl_lock+0x17/0x20
[   22.991552]        [<ffffffff815230b2>] netdev_notify_peers+0x12/0x30
[   22.991579]        [<ffffffffa0340212>] netvsc_send_garp+0x22/0x30 [hv_netvsc]
[   22.991610]        [<ffffffff8108d251>] process_one_work+0x211/0x6e0
[   22.991637]        [<ffffffff8108d83b>] worker_thread+0x11b/0x3a0
[   22.991663]        [<ffffffff81095e5d>] kthread+0xed/0x100
[   22.991686]        [<ffffffff81681c6c>] ret_from_fork+0x7c/0xb0
[   22.991715]
-> #0 ((&(&net_device_ctx->dwork)->work)){+.+.+.}:
[   22.991715]        [<ffffffff810de817>] check_prevs_add+0x967/0x970
[   22.991715]        [<ffffffff810dfdd9>] __lock_acquire+0xb19/0x1260
[   22.991715]        [<ffffffff810e0d12>] lock_acquire+0xa2/0x1f0
[   22.991715]        [<ffffffff8108afde>] flush_work+0x4e/0x2e0
[   22.991715]        [<ffffffff8108e1b5>] __cancel_work_timer+0x95/0x130
[   22.991715]        [<ffffffff8108e303>] cancel_delayed_work_sync+0x13/0x20
[   22.991715]        [<ffffffffa03404e4>] netvsc_change_mtu+0x84/0x200 [hv_netvsc]
[   22.991715]        [<ffffffff815233d4>] dev_set_mtu+0x34/0x80
[   22.991715]        [<ffffffff8153bc2a>] do_setlink+0x23a/0xa00
[   22.991715]        [<ffffffff8153d054>] rtnl_newlink+0x394/0x5e0
[   22.991715]        [<ffffffff81539eac>] rtnetlink_rcv_msg+0x9c/0x260
[   22.991715]        [<ffffffff8155cdd9>] netlink_rcv_skb+0xa9/0xc0
[   22.991715]        [<ffffffff81539dfa>] rtnetlink_rcv+0x2a/0x40
[   22.991715]        [<ffffffff8155c41d>] netlink_unicast+0xdd/0x190
[   22.991715]        [<ffffffff8155c807>] netlink_sendmsg+0x337/0x750
[   22.991715]        [<ffffffff8150d219>] sock_sendmsg+0x99/0xd0
[   22.991715]        [<ffffffff8150d63e>] ___sys_sendmsg+0x39e/0x3b0
[   22.991715]        [<ffffffff8150eba2>] __sys_sendmsg+0x42/0x80
[   22.991715]        [<ffffffff8150ebf2>] SyS_sendmsg+0x12/0x20
[   22.991715]        [<ffffffff81681d19>] system_call_fastpath+0x16/0x1b

This is because we hold the rtnl_lock() before ndo_change_mtu() and try to flush
the work in netvsc_change_mtu(), in the mean time, netdev_notify_peers() may be
called from worker and also trying to hold the rtnl_lock. This will lead the
flush won't succeed forever. Solve this by not canceling and flushing the work,
this is safe because the transmission done by NETDEV_NOTIFY_PEERS was
synchronized with the netif_tx_disable() called by netvsc_change_mtu().

Reported-by: Yaju Cao <yacao@redhat.com>
Tested-by: Yaju Cao <yacao@redhat.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tg3: Initialize REG_BASE_ADDR at PCI config offset 120 to 0

[ Upstream commit 388d3335575f4c056dcf7138a30f1454e2145cd8 ]

The new tg3 driver leaves REG_BASE_ADDR (PCI config offset 120)
uninitialized. From power on reset this register may have garbage in it. The
Register Base Address register defines the device local address of a
register. The data pointed to by this location is read or written using
the Register Data register (PCI config offset 128). When REG_BASE_ADDR has
garbage any read or write of Register Data Register (PCI 128) will cause the
PCI bus to lock up. The TCO watchdog will fire and bring down the system.

Signed-off-by: Nat Gurumoorthy <natg@google.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: unix: allow set_peek_off to fail

[ Upstream commit 12663bfc97c8b3fdb292428105dd92d563164050 ]

unix_dgram_recvmsg() will hold the readlock of the socket until recv
is complete.

In the same time, we may try to setsockopt(SO_PEEK_OFF) which will hang until
unix_dgram_recvmsg() will complete (which can take a while) without allowing
us to break out of it, triggering a hung task spew.

Instead, allow set_peek_off to fail, this way userspace will not hang.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: drop_monitor: fix the value of maxattr

[ Upstream commit d323e92cc3f4edd943610557c9ea1bb4bb5056e8 ]

maxattr in genl_family should be used to save the max attribute
type, but not the max command type. Drop monitor doesn't support
any attributes, so we should leave it as zero.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: don't count addrconf generated routes against gc limit

[ Upstream commit a3300ef4bbb1f1e33ff0400e1e6cf7733d988f4f ]

Brett Ciphery reported that new ipv6 addresses failed to get installed
because the addrconf generated dsts where counted against the dst gc
limit. We don't need to count those routes like we currently don't count
administratively added routes.

Because the max_addresses check enforces a limit on unbounded address
generation first in case someone plays with router advertisments, we
are still safe here.

Reported-by: Brett Ciphery <brett.ciphery@windriver.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macvtap: signal truncated packets

[ Upstream commit ce232ce01d61b184202bb185103d119820e1260c ]

macvtap_put_user() never return a value grater than iov length, this in fact
bypasses the truncated checking in macvtap_recvmsg(). Fix this by always
returning the size of packet plus the possible vlan header to let the trunca
checking work.

Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tun: update file current position

[ Upstream commit d0b7da8afa079ffe018ab3e92879b7138977fc8f ]

Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macvtap: update file current position

[ Upstream commit e6ebc7f16ca1434a334647aa56399c546be4e64b ]

Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macvtap: Do not double-count received packets

[ Upstream commit 006da7b07bc4d3a7ffabad17cf639eec6849c9dc ]

Currently macvlan will count received packets after calling each
vlans receive handler.   Macvtap attempts to count the packet
yet again when the user reads the packet from the tap socket.
This code doesn't do this consistently either.  Remove the
counting from macvtap and let only macvlan count received
packets.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rds: prevent BUG_ON triggered on congestion update to loopback

[ Upstream commit 18fc25c94eadc52a42c025125af24657a93638c0 ]

After congestion update on a local connection, when rds_ib_xmit returns
less bytes than that are there in the message, rds_send_xmit calls
back rds_ib_xmit with an offset that causes BUG_ON(off & RDS_FRAG_SIZE)
to trigger.

For a 4Kb PAGE_SIZE rds_ib_xmit returns min(8240,4096)=4096 when actually
the message contains 8240 bytes. rds_send_xmit thinks there is more to send
and calls rds_ib_xmit again with a data offset "off" of 4096-48(rds header)
=4048 bytes thus hitting the BUG_ON(off & RDS_FRAG_SIZE) [RDS_FRAG_SIZE=4k].

The commit 6094628bfd94323fc1cea05ec2c6affd98c18f7f
"rds: prevent BUG_ON triggering on congestion map updates" introduced
this regression. That change was addressing the triggering of a different
BUG_ON in rds_send_xmit() on PowerPC architecture with 64Kbytes PAGE_SIZE:
  BUG_ON(ret != 0 &&
      conn->c_xmit_sg == rm->data.op_nents);
This was the sequence it was going through:
(rds_ib_xmit)
/* Do not send cong updates to IB loopback */
if (conn->c_loopback
   && rm->m_inc.i_hdr.h_flags & RDS_FLAG_CONG_BITMAP) {
   rds_cong_map_updated(conn->c_fcong, ~(u64) 0);
     return sizeof(struct rds_header) + RDS_CONG_MAP_BYTES;
}
rds_ib_xmit returns 8240
rds_send_xmit:
  c_xmit_data_off = 0 + 8240 - 48 (rds header accounted only the first time)
     = 8192
  c_xmit_data_off < 65536 (sg->length), so calls rds_ib_xmit again
rds_ib_xmit returns 8240
rds_send_xmit:
  c_xmit_data_off = 8192 + 8240 = 16432, calls rds_ib_xmit again
  and so on (c_xmit_data_off 24672,32912,41152,49392,57632)
rds_ib_xmit returns 8240
On this iteration this sequence causes the BUG_ON in rds_send_xmit:
    while (ret) {
     tmp = min_t(int, ret, sg->length - conn->c_xmit_data_off);
     [tmp = 65536 - 57632 = 7904]
     conn->c_xmit_data_off += tmp;
     [c_xmit_data_off = 57632 + 7904 = 65536]
     ret -= tmp;
     [ret = 8240 - 7904 = 336]
     if (conn->c_xmit_data_off == sg->length) {
     conn->c_xmit_data_off = 0;
     sg++;
     conn->c_xmit_sg++;
     BUG_ON(ret != 0 &&
     conn->c_xmit_sg == rm->data.op_nents);
     [c_xmit_sg = 1, rm->data.op_nents = 1]

What the current fix does:
Since the congestion update over loopback is not actually transmitted
as a message, all that rds_ib_xmit needs to do is let the caller think
the full message has been transmitted and not return partial bytes.
It will return 8240 (RDS_CONG_MAP_BYTES+48) when PAGE_SIZE is 4Kb.
And 64Kb+48 when page size is 64Kb.

Reported-by: Josh Hunt <joshhunt00@gmail.com>
Tested-by: Honggang Li <honli@redhat.com>
Acked-by: Bang Nguyen <bang.nguyen@oracle.com>
Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: do not pretend FRAGLIST support

[ Upstream commit 28e24c62ab3062e965ef1b3bcc244d50aee7fa85 ]

Few network drivers really supports frag_list : virtual drivers.

Some drivers wrongly advertise NETIF_F_FRAGLIST feature.

If skb with a frag_list is given to them, packet on the wire will be
corrupt.

Remove this flag, as core networking stack will make sure to
provide packets that can be sent without corruption.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Cc: Anirudha Sarangi <anirudh@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.76

hwmon: (w83l768ng) Fix fan speed control range

commit 33a7ab91d509fa33b4bcd3ce0038cc80298050da upstream.

The W83L786NG stores the fan speed on 4 bits while the sysfs interface
uses a 0-255 range. Thus the driver should scale the user input down
to map it to the device range, and scale up the value read from the
device before presenting it to the user. The reserved register nibble
should be left unchanged.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: process labeled IPsec TCP SYN-ACK packets properly in selinux_ip_postroute()

commit c0828e50485932b7e019df377a6b0a8d1ebd3080 upstream.

Due to difficulty in arriving at the proper security label for
TCP SYN-ACK packets in selinux_ip_postroute(), we need to check packets
while/before they are undergoing XFRM transforms instead of waiting
until afterwards so that we can determine the correct security label.

Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: look for IPsec labels on both inbound and outbound packets

commit 817eff718dca4e54d5721211ddde0914428fbb7c upstream.

Previously selinux_skb_peerlbl_sid() would only check for labeled
IPsec security labels on inbound packets, this patch enables it to
check both inbound and outbound traffic for labeled IPsec security
labels.

Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh: always link in helper functions extracted from libgcc

commit 84ed8a99058e61567f495cc43118344261641c5f upstream.

E.g. landisk_defconfig, which has CONFIG_NTFS_FS=m:

  ERROR: "__ashrdi3" [fs/ntfs/ntfs.ko] undefined!

For "lib-y", if no symbols in a compilation unit are referenced by other
units, the compilation unit will not be included in vmlinux.  This
breaks modules that do reference those symbols.

Use "obj-y" instead to fix this.

http://kisskb.ellerman.id.au/kisskb/buildresult/8838077/

This doesn't fix all cases. There are others, e.g. udivsi3.
This is also not limited to sh, many architectures handle this in the
same way.

A simple solution is to unconditionally include all helper functions.
A more complex solution is to make the choice of "lib-y" or "obj-y" depend
on CONFIG_MODULES:

  obj-$(CONFIG_MODULES) += ...
  lib-y($CONFIG_MODULES) += ...

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Tested-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched: Avoid throttle_cfs_rq() racing with period_timer stopping

commit f9f9ffc237dd924f048204e8799da74f9ecf40cf upstream.

throttle_cfs_rq() doesn't check to make sure that period_timer is running,
and while update_curr/assign_cfs_runtime does, a concurrently running
period_timer on another cpu could cancel itself between this cpu's
update_curr and throttle_cfs_rq(). If there are no other cfs_rqs running
in the tg to restart the timer, this causes the cfs_rq to be stranded
forever.

Fix this by calling __start_cfs_bandwidth() in throttle if the timer is
inactive.

(Also add some sched_debug lines for cfs_bandwidth.)

Tested: make a run/sleep task in a cgroup, loop switching the cgroup
between 1ms/100ms quota and unlimited, checking for timer_active=0 and
throttled=1 as a failure. With the throttle_cfs_rq() change commented out
this fails, with the full patch it passes.

Signed-off-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: pjt@google.com
Link: http://lkml.kernel.org/r/20131016181632.22647.84174.stgit@sword-of-the-dawn.mtv.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: msm: Fix irq mask/unmask by writing bits instead of numbers

commit 4cc629b7a20945ce35628179180329b6bc9e552b upstream.

We should be writing bits here but instead we're writing the
numbers that correspond to the bits we want to write. Fix it by
wrapping the numbers in the BIT() macro. This fixes gpios acting
as interrupts.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: don't BUG but return ENOSPC if a handle runs out of space

commit f6c07cad081ba222d63623d913aafba5586c1d2c upstream.

If a handle runs out of space, we currently stop the kernel with a BUG
in jbd2_journal_dirty_metadata().  This makes it hard to figure out
what might be going on.  So return an error of ENOSPC, so we can let
the file system layer figure out what is going on, to make it more
likely we can get useful debugging information).  This should make it
easier to debug problems such as the one which was reported by:

    https://bugzilla.kernel.org/show_bug.cgi?id=44731

The only two callers of this function are ext4_handle_dirty_metadata()
and ocfs2_journal_dirty().  The ocfs2 function will trigger a
BUG_ON(), which means there will be no change in behavior.  The ext4
function will call ext4_error_inode() which will print the useful
debugging information and then handle the situation using ext4's error
handling mechanisms (i.e., which might mean halting the kernel or
remounting the file system read-only).

Also, since both file systems already call WARN_ON(), drop the WARN_ON
from jbd2_journal_dirty_metadata() to avoid two stack traces from
being displayed.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: ocfs2-devel@oss.oracle.com
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

GFS2: Fix incorrect invalidation for DIO/buffered I/O

commit dfd11184d894cd0a92397b25cac18831a1a6a5bc upstream.

In patch 209806aba9d540dde3db0a5ce72307f85f33468f we allowed
local deferred locks to be granted against a cached exclusive
lock. That opened up a corner case which this patch now
fixes.

The solution to the problem is to check whether we have cached
pages each time we do direct I/O and if so to unmap, flush
and invalidate those pages. Since the glock state machine
normally does that for us, mostly the code will be a no-op.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

GFS2: don't hold s_umount over blkdev_put

commit dfe5b9ad83a63180f358b27d1018649a27b394a9 upstream.

This is a GFS2 version of Tejun's patch:
4f331f01b9c43bf001d3ffee578a97a1e0633eac
vfs: don't hold s_umount over close_bdev_exclusive() call

In this case its blkdev_put itself that is the issue and this
patch uses the same solution of dropping and retaking s_umount.

Reported-by: Tejun Heo <tj@kernel.org>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: allocate absinfo data when setting ABS capability

commit 28a2a2e1aedbe2d8b2301e6e0e4e63f6e4177aca upstream.

We need to make sure we allocate absinfo data when we are setting one of
EV_ABS/ABS_XXX capabilities, otherwise we may bomb when we try to emit this
event.

Rested-by: Paul Cercueil <pcercuei@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hugetlb: check for pte NULL pointer in __page_check_address()

commit 98398c32f6687ee1e1f3ae084effb4b75adb0747 upstream.

In __page_check_address(), if address's pud is not present,
huge_pte_offset() will return NULL, we should check the return value.

Signed-off-by: Jianguo Wu <wujianguo@huawei.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: qiuxishi <qiuxishi@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: pci: Fix oops on driver unload

commit 9278db6279e28d4d433bc8a848e10b4ece8793ed upstream.

On Fedora systems, unloading rtl8192ce causes an oops. This patch fixes the
problem reported at https://bugzilla.redhat.com/show_bug.cgi?id=852761.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

radiotap: fix bitmap-end-finding buffer overrun

commit bd02cd2549cfcdfc57cb5ce57ffc3feb94f70575 upstream.

Evan Huus found (by fuzzing in wireshark) that the radiotap
iterator code can access beyond the length of the buffer if
the first bitmap claims an extension but then there's no
data at all. Fix this.

Reported-by: Evan Huus <eapache@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8

commit 87809942d3fa60bafb7a58d0bdb1c79e90a6821d upstream.

We've received multiple reports in Fedora via (BZ 907193)
that the Seagate Momentus SpinPoint M8 errors out when enabling AA:
[    2.555905] ata2.00: failed to enable AA (error_mask=0x1)
[    2.568482] ata2.00: failed to enable AA (error_mask=0x1)

Add the ATA_HORKAGE_BROKEN_FPDMA_AA for this specific harddisk.

Reported-by: Nicholas <arealityfarbetween@googlemail.com>
Signed-off-by: Michele Baldessari <michele@acksyn.org>
Tested-by: Nicholas <arealityfarbetween@googlemail.com>
Acked-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpupower: Fix segfault due to incorrect getopt_long arugments

commit f447ef4a56dee4b68a91460bcdfe06b5011085f2 upstream.

If a user calls 'cpupower set --perf-bias 15', the process will end with
a SIGSEGV in libc because cpupower-set passes a NULL optarg to the atoi
call.  This is because the getopt_long structure currently has all of
the options as having an optional_argument when they really have a
required argument.  We change the structure to use required_argument to
match the short options and it resolves the issue.

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1000439

Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Align p_end

commit 286e4f90a72c0b0621dde0294af6ed4b0baddabb upstream.

p_end is an 8 byte value embedded in the text section. This means it
is only 4 byte aligned when it should be 8 byte aligned. Fix this
by adding an explicit alignment.

This fixes an issue where POWER7 little endian builds with
CONFIG_RELOCATABLE=y fail to boot.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Fix bad stack check in exception entry

commit 90ff5d688e61f49f23545ffab6228bd7e87e6dc7 upstream.

In EXCEPTION_PROLOG_COMMON() we check to see if the stack pointer (r1)
is valid when coming from the kernel.  If it's not valid, we die but
with a nice oops message.

Currently we allocate a stack frame (subtract INT_FRAME_SIZE) before we
check to see if the stack pointer is negative.  Unfortunately, this
won't detect a bad stack where r1 is less than INT_FRAME_SIZE.

This patch fixes the check to compare the modified r1 with
-INT_FRAME_SIZE.  With this, bad kernel stack pointers (including NULL
pointers) are correctly detected again.

Kudos to Paulus for finding this.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k_htc: properly set MAC address and BSSID mask

commit 657eb17d87852c42b55c4b06d5425baa08b2ddb3 upstream.

Pick the MAC address of the first virtual interface as the new hardware MAC
address. Set BSSID mask according to this MAC address. This fixes CVE-2013-4579.

Signed-off-by: Mathy Vanhoef <vanhoefm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: Fix interrupt handling for the AR9002 family

commit 73f0b56a1ff64e7fb6c3a62088804bab93bcedc2 upstream.

This patch adds a driver workaround for a HW issue.

A race condition in the HW results in missing interrupts,
which can be avoided by a read/write with the ISR register.
All chips in the AR9002 series are affected by this bug - AR9003
and above do not have this problem.

Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm9601: work around tx fifo sync issue on dm962x

commit 4263c86dca5198da6bd3ad826d0b2304fbe25776 upstream.

Certain dm962x revisions contain an bug, where if a USB bulk transfer retry
(E.G. if bulk crc mismatch) happens right after a transfer with odd or
maxpacket length, the internal tx hardware fifo gets out of sync causing
the interface to stop working.

Work around it by adding up to 3 bytes of padding to ensure this situation
cannot trigger.

This workaround also means we never pass multiple-of-maxpacket size skb's
to usbnet, so the length adjustment to handle usbnet's padding of those can
be removed.

Reported-by: Joseph Chang <joseph_chang@davicom.com.tw>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm9601: fix reception of full size ethernet frames on dm9620/dm9621a

commit 407900cfb54bdb2cfa228010b6697305f66b2948 upstream.

dm9620/dm9621a require room for 4 byte padding even in dm9601 (3 byte
header) mode.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: Avoid data inconsistency due to d-cache aliasing in readpage()

commit 56f91aad69444d650237295f68c195b74d888d95 upstream.

If the length of data to be read in readpage() is exactly
PAGE_CACHE_SIZE, the original code does not flush d-cache
for data consistency after finishing reading. This patches fixes
this.

Signed-off-by: Li Wang <liwang@ubuntukylin.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: 0x9649 is SUMO2 not SUMO

commit d00adcc8ae9e22eca9d8af5f66c59ad9a74c90ec upstream.

Fixes rendering corruption due to incorrect
gfx configuration.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=63599

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix asic gfx values for scrapper asics

commit e2f6c88fb903e123edfd1106b0b8310d5117f774 upstream.

Fixes gfx corruption on certain TN/RL parts.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=60389

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_dma: mark broken

commit 77873803363c9e831fc1d1e6895c084279090c22 upstream.

net_dma can cause data to be copied to a stale mapping if a
copy-on-write fault occurs during dma.  The application sees missing
data.

The following trace is triggered by modifying the kernel to WARN if it
ever triggers copy-on-write on a page that is undergoing dma:

 WARNING: CPU: 24 PID: 2529 at lib/dma-debug.c:485 debug_dma_assert_idle+0xd2/0x120()
 ioatdma 0000:00:04.0: DMA-API: cpu touching an active dma mapped page [pfn=0x16bcd9]
 Modules linked in: iTCO_wdt iTCO_vendor_support ioatdma lpc_ich pcspkr dca
 CPU: 24 PID: 2529 Comm: linbug Tainted: G        W    3.13.0-rc1+ #353
  00000000000001e5 ffff88016f45f688 ffffffff81751041 ffff88017ab0ef70
  ffff88016f45f6d8 ffff88016f45f6c8 ffffffff8104ed9c ffffffff810f3646
  ffff8801768f4840 0000000000000282 ffff88016f6cca10 00007fa2bb699349
 Call Trace:
  [<ffffffff81751041>] dump_stack+0x46/0x58
  [<ffffffff8104ed9c>] warn_slowpath_common+0x8c/0xc0
  [<ffffffff810f3646>] ? ftrace_pid_func+0x26/0x30
  [<ffffffff8104ee86>] warn_slowpath_fmt+0x46/0x50
  [<ffffffff8139c062>] debug_dma_assert_idle+0xd2/0x120
  [<ffffffff81154a40>] do_wp_page+0xd0/0x790
  [<ffffffff811582ac>] handle_mm_fault+0x51c/0xde0
  [<ffffffff813830b9>] ? copy_user_enhanced_fast_string+0x9/0x20
  [<ffffffff8175fc2c>] __do_page_fault+0x19c/0x530
  [<ffffffff8175c196>] ? _raw_spin_lock_bh+0x16/0x40
  [<ffffffff810f3539>] ? trace_clock_local+0x9/0x10
  [<ffffffff810fa1f4>] ? rb_reserve_next_event+0x64/0x310
  [<ffffffffa0014c00>] ? ioat2_dma_prep_memcpy_lock+0x60/0x130 [ioatdma]
  [<ffffffff8175ffce>] do_page_fault+0xe/0x10
  [<ffffffff8175c862>] page_fault+0x22/0x30
  [<ffffffff81643991>] ? __kfree_skb+0x51/0xd0
  [<ffffffff813830b9>] ? copy_user_enhanced_fast_string+0x9/0x20
  [<ffffffff81388ea2>] ? memcpy_toiovec+0x52/0xa0
  [<ffffffff8164770f>] skb_copy_datagram_iovec+0x5f/0x2a0
  [<ffffffff8169d0f4>] tcp_rcv_established+0x674/0x7f0
  [<ffffffff816a68c5>] tcp_v4_do_rcv+0x2e5/0x4a0
  [..]
 ---[ end trace e30e3b01191b7617 ]---
 Mapped at:
  [<ffffffff8139c169>] debug_dma_map_page+0xb9/0x160
  [<ffffffff8142bf47>] dma_async_memcpy_pg_to_pg+0x127/0x210
  [<ffffffff8142cce9>] dma_memcpy_pg_to_iovec+0x119/0x1f0
  [<ffffffff81669d3c>] dma_skb_copy_datagram_iovec+0x11c/0x2b0
  [<ffffffff8169d1ca>] tcp_rcv_established+0x74a/0x7f0:

...the problem is that the receive path falls back to cpu-copy in
several locations and this trace is just one of the areas.  A few
options were considered to fix this:

1/ sync all dma whenever a cpu copy branch is taken

2/ modify the page fault handler to hold off while dma is in-flight

Option 1 adds yet more cpu overhead to an "offload" that struggles to compete
with cpu-copy.  Option 2 adds checks for behavior that is already documented as
broken when using get_user_pages().  At a minimum a debug mode is warranted to
catch and flag these violations of the dma-api vs get_user_pages().

Thanks to David for his reproducer.

Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Reported-by: David Whipple <whipple@securedatainnovations.ch>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/edid: add quirk for BPC in Samsung NP700G7A-S01PL notebook

commit 49d45a31b71d7d9da74485922bdb63faf3dc9684 upstream.

This bug in EDID was exposed by:

commit eccea7920cfb009c2fa40e9ecdce8c36f61cab66
Author: Alex Deucher <alexander.deucher@amd.com>
Date:   Mon Mar 26 15:12:54 2012 -0400

    drm/radeon/kms: improve bpc handling (v2)

Which resulted in kind of regression in 3.5. This fixes
https://bugs.freedesktop.org/show_bug.cgi?id=70934

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/rt: Fix rq's cpupri leak while enqueue/dequeue child RT entities

commit 757dfcaa41844595964f1220f1d33182dae49976 upstream.

This patch touches the RT group scheduling case.

Functions inc_rt_prio_smp() and dec_rt_prio_smp() change (global) rq's
priority, while rt_rq passed to them may be not the top-level rt_rq.
This is wrong, because changing of priority on a child level does not
guarantee that the priority is the highest all over the rq. So, this
leak makes RT balancing unusable.

The short example: the task having the highest priority among all rq's
RT tasks (no one other task has the same priority) are waking on a
throttle rt_rq.  The rq's cpupri is set to the task's priority
equivalent, but real rq->rt.highest_prio.curr is less.

The patch below fixes the problem.

Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
CC: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/49231385567953@web4m.yandex.ru
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check for overlapping extents in ext4_valid_extent_entries()

commit 5946d089379a35dda0e531710b48fca05446a196 upstream.

A corrupted ext4 may have out of order leaf extents, i.e.

extent: lblk 0--1023, len 1024, pblk 9217, flags: LEAF UNINIT
extent: lblk 1000--2047, len 1024, pblk 10241, flags: LEAF UNINIT
             ^^^^ overlap with previous extent

Reading such extent could hit BUG_ON() in ext4_es_cache_extent().

BUG_ON(end < lblk);

The problem is that __read_extent_tree_block() tries to cache holes as
well but assumes 'lblk' is greater than 'prev' and passes underflowed
length to ext4_es_cache_extent(). Fix it by checking for overlapping
extents in ext4_valid_extent_entries().

I hit this when fuzz testing ext4, and am able to reproduce it by
modifying the on-disk extent by hand.

Also add the check for (ee_block + len - 1) in ext4_valid_extent() to
make sure the value is not overflow.

Ran xfstests on patched ext4 and no regression.

Cc: Lukáš Czerner <lczerner@redhat.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix use-after-free in ext4_mb_new_blocks

commit 4e8d2139802ce4f41936a687f06c560b12115247 upstream.

ext4_mb_put_pa should hold pa->pa_lock before accessing pa->pa_count.
While ext4_mb_use_preallocated checks pa->pa_deleted first and then
increments pa->count later, ext4_mb_put_pa decrements pa->pa_count
before holding pa->pa_lock and then sets pa->pa_deleted.

* Free sequence
ext4_mb_put_pa (1): atomic_dec_and_test pa->pa_count
ext4_mb_put_pa (2): lock pa->pa_lock
ext4_mb_put_pa (3): check pa->pa_deleted
ext4_mb_put_pa (4): set pa->pa_deleted=1
ext4_mb_put_pa (5): unlock pa->pa_lock
ext4_mb_put_pa (6): remove pa from a list
ext4_mb_pa_callback: free pa

* Use sequence
ext4_mb_use_preallocated (1): iterate over preallocation
ext4_mb_use_preallocated (2): lock pa->pa_lock
ext4_mb_use_preallocated (3): check pa->pa_deleted
ext4_mb_use_preallocated (4): increase pa->pa_count
ext4_mb_use_preallocated (5): unlock pa->pa_lock
ext4_mb_release_context: access pa

* Use-after-free sequence
[initial status] <pa->pa_deleted = 0, pa_count = 1>
ext4_mb_use_preallocated (1): iterate over preallocation
ext4_mb_use_preallocated (2): lock pa->pa_lock
ext4_mb_use_preallocated (3): check pa->pa_deleted
ext4_mb_put_pa (1): atomic_dec_and_test pa->pa_count
[pa_count decremented] <pa->pa_deleted = 0, pa_count = 0>
ext4_mb_use_preallocated (4): increase pa->pa_count
[pa_count incremented] <pa->pa_deleted = 0, pa_count = 1>
ext4_mb_use_preallocated (5): unlock pa->pa_lock
ext4_mb_put_pa (2): lock pa->pa_lock
ext4_mb_put_pa (3): check pa->pa_deleted
ext4_mb_put_pa (4): set pa->pa_deleted=1
[race condition!] <pa->pa_deleted = 1, pa_count = 1>
ext4_mb_put_pa (5): unlock pa->pa_lock
ext4_mb_put_pa (6): remove pa from a list
ext4_mb_pa_callback: free pa
ext4_mb_release_context: access pa

AddressSanitizer has detected use-after-free in ext4_mb_new_blocks
Bug report: http://goo.gl/rG1On3

Signed-off-by: Junho Ryu <jayr@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_idle: enable IVB Xeon support

commit 23795e580cad5d6b73d47d51b9074ce3e58bf334 upstream.

IVB Xeon currently shares the same parameters IVB client.

Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Vinson Lee <vlee@twopensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_idle: initial IVB support

commit 6edab08c24f9141d69cfa4683a0a027d86ab303e upstream.

From an OS point of view, IVB looks like SNB, but quicker.

Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Vinson Lee <vlee@twopensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Initialize the ftrace profiler for each possible cpu

commit c4602c1c818bd6626178d6d3fcc152d9f2f48ac0 upstream.

Ftrace currently initializes only the online CPUs. This implementation has
two problems:
- If we online a CPU after we enable the function profile, and then run the
  test, we will lose the trace information on that CPU.
  Steps to reproduce:
  # echo 0 > /sys/devices/system/cpu/cpu1/online
  # cd <debugfs>/tracing/
  # echo <some function name> >> set_ftrace_filter
  # echo 1 > function_profile_enabled
  # echo 1 > /sys/devices/system/cpu/cpu1/online
  # run test
- If we offline a CPU before we enable the function profile, we will not clear
  the trace information when we enable the function profile. It will trouble
  the users.
  Steps to reproduce:
  # cd <debugfs>/tracing/
  # echo <some function name> >> set_ftrace_filter
  # echo 1 > function_profile_enabled
  # run test
  # cat trace_stat/function*
  # echo 0 > /sys/devices/system/cpu/cpu1/online
  # echo 0 > function_profile_enabled
  # echo 1 > function_profile_enabled
  # cat trace_stat/function*
  # run test
  # cat trace_stat/function*

So it is better that we initialize the ftrace profiler for each possible cpu
every time we enable the function profile instead of just the online ones.

Link: http://lkml.kernel.org/r/1387178401-10619-1-git-send-email-miaox@cn.fujitsu.com
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: selinux_setprocattr()->ptrace_parent() needs rcu_read_lock()

commit c0c1439541f5305b57a83d599af32b74182933fe upstream.

selinux_setprocattr() does ptrace_parent(p) under task_lock(p),
but task_struct->alloc_lock doesn't pin ->parent or ->ptrace,
this looks confusing and triggers the "suspicious RCU usage"
warning because ptrace_parent() does rcu_dereference_check().

And in theory this is wrong, spin_lock()->preempt_disable()
doesn't necessarily imply rcu_read_lock() we need to access
the ->parent.

Reported-by: Evan McNabb <emcnabb@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: fix broken peer recv check

commit 46d01d63221c3508421dd72ff9c879f61053cffc upstream.

Fix a broken networking check. Return an error if peer recv fails.  If
secmark is active and the packet recv succeeds the peer recv error is
ignored.

Signed-off-by: Chad Hanson <chanson@trustedcs.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdc-wdm: manage_power should always set needs_remote_wakeup

commit 4144bc861ed7934d56f16d2acd808d44af0fcc90 upstream.

Reported-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: Add SNDRV_PCM_STATE_PAUSED case in wait_for_avail function

commit ed697e1aaf7237b1a62af39f64463b05c262808d upstream.

When the process is sleeping at the SNDRV_PCM_STATE_PAUSED
state from the wait_for_avail function, the sleep process will be woken by
timeout(10 seconds). Even if the sleep process wake up by timeout, by this
patch, the process will continue with sleep and wait for the other state.

Signed-off-by: JongHo Kim <furmuwon@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8904: fix DSP mode B configuration

commit f0199bc5e3a3ec13f9bc938556517ec430b36437 upstream.

When wm8904 work in DSP mode B, we still need to configure it to
work in DSP mode. Or else, it will work in Right Justified mode.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: pmac_zilog, check existence of ports in pmz_console_init()

commit dc1dc2f8a5dd863bf2e79f338fc3ae29e99c683a upstream.

When booting a multi-platform m68k kernel on a non-Mac with "console=ttyS0"
on the kernel command line, it crashes with:

Unable to handle kernel NULL pointer dereference at virtual address   (null)
Oops: 00000000
PC: [<0013ad28>] __pmz_startup+0x32/0x2a0
...
Call Trace: [<002c5d3e>] pmz_console_setup+0x64/0xe4

The normal tty driver doesn't crash, because init_pmz() checks
pmz_ports_count again after calling pmz_probe().

In the serial console initialization path, pmz_console_init() doesn't do
this, causing the driver to crash later.

Add a check for pmz_ports_count to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: kvm: fix rare but potential deadlock scene

commit 91648ec09c1ef69c4d840ab6dab391bfb452d554 upstream.

Since kvmppc_hv_find_lock_hpte() is called from both virtmode and
realmode, so it can trigger the deadlock.

Suppose the following scene:

Two physical cpuM, cpuN, two VM instances A, B, each VM has a group of
vcpus.

If on cpuM, vcpu_A_1 holds bitlock X (HPTE_V_HVLOCK), then is switched
out, and on cpuN, vcpu_A_2 try to lock X in realmode, then cpuN will be
caught in realmode for a long time.

What makes things even worse if the following happens,
  On cpuM, bitlockX is hold, on cpuN, Y is hold.
  vcpu_B_2 try to lock Y on cpuM in realmode
  vcpu_A_2 try to lock X on cpuN in realmode

Oops! deadlock happens

Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: wake up 'safe' waiters when unregistering request

commit fc55d2c9448b34218ca58733a6f51fbede09575b upstream.

We also need to wake up 'safe' waiters if error occurs or request
aborted. Otherwise sync(2)/fsync(2) may hang forever.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: cleanup aborted requests when re-sending requests.

commit eb1b8af33c2e42a9a57fc0a7588f4a7b255d2e79 upstream.

Aborted requests usually get cleared when the reply is received.
If MDS crashes, no reply will be received. So we need to cleanup
aborted requests when re-sending requests.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: fix race in generic write

commit 6f6485463aada1ec6a0f3db6a03eb8e393d6bb55 upstream.

Fix race in generic write implementation, which could lead to
temporarily degraded throughput.

The current generic write implementation introduced by commit
27c7acf22047 ("USB: serial: reimplement generic fifo-based writes") has
always had this bug, although it's fairly hard to trigger and the
consequences are not likely to be noticed.

Specifically, a write() on one CPU while the completion handler is
running on another could result in only one of the two write urbs being
utilised to empty the remainder of the write fifo (unless there is a
second write() that doesn't race during that time).

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.75

ARM: OMAP2+: hwmod: Fix SOFTRESET logic

commit 313a76ee11cda6700548afe68499ef174a240688 upstream.

In _ocp_softreset(), after _set_softreset() + write_sysconfig(),
the hwmod's sysc_cache will always contain SOFTRESET bit set
so all further writes to sysconfig using this cache will initiate
a repeated SOFTRESET e.g. enable_sysc(). This is true for OMAP3 like
platforms that have RESET_DONE status in the SYSSTATUS register and
so the the SOFTRESET bit in SYSCONFIG is not automatically cleared.
It is not a problem for OMAP4 like platforms that indicate RESET
completion by clearing the SOFTRESET bit in the SYSCONFIG register.

This repeated SOFTRESET is undesired and was the root cause of
USB host issues on OMAP3 platforms when hwmod was allowed to do the
SOFTRESET for the USB Host module.

To fix this we clear the SOFTRESET bit and update the sysconfig
register + sysc_cache using write_sysconfig().

Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> # Panda, BeagleXM
[paul@pwsan.com: renamed _clr_softreset() to _clear_softreset()]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "net: update consumers of MSG_MORE to recognize MSG_SENDPAGE_NOTLAST"

It turns out that commit: d3f7d56a7a4671d395e8af87071068a195257bf6 was
applied to the tree twice, which didn't hurt anything, but it's good to
fix this up.

Reported-by: Veaceslav Falico <veaceslav@falico.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Shawn Landden <shawnlandden@gmail.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hpfs: fix warnings when the filesystem fills up

commit bbd465df73f0d8ba41b8a0732766a243d0f5b356 upstream.

This patch fixes warnings due to missing lock on write error path.

  WARNING: at fs/hpfs/hpfs_fn.h:353 hpfs_truncate+0x75/0x80 [hpfs]()
  Hardware name: empty
  Pid: 26563, comm: dd Tainted: P           O 3.9.4 #12
  Call Trace:
    hpfs_truncate+0x75/0x80 [hpfs]
    hpfs_write_begin+0x84/0x90 [hpfs]
    _hpfs_bmap+0x10/0x10 [hpfs]
    generic_file_buffered_write+0x121/0x2c0
    __generic_file_aio_write+0x1c7/0x3f0
    generic_file_aio_write+0x7c/0x100
    do_sync_write+0x98/0xd0
    hpfs_file_write+0xd/0x50 [hpfs]
    vfs_write+0xa2/0x160
    sys_write+0x51/0xa0
    page_fault+0x22/0x30
    system_call_fastpath+0x1a/0x1f

Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sc1200_wdt: Fix oops

commit dace8bbfccfd9e4fcccfffcfbd82881fda3e756f upstream.

If loaded with isapnp = 0 the driver explodes. This is catching
people out now and then. What should happen in the working case is
a complete mystery and the code appears terminally confused, but we
can at least make the error path work properly.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Partially-Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=53991
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ssv_dnp: use comedi_dio_update_state()

commit f6b316bcd8c421acd6fa5a6e18b4c846ecb9d965 upstream.

Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state.

Also, fix a bug where the state of the channels is returned in data[0].
The comedi core expects it to be returned in data[1].

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: fix possible NULL deref on detach

commit 2fd2bdfccae61efe18f6b92b6a45fbf936d75b48 upstream.

pcmuio_detach() is called by the comedi core even if pcmuio_attach()
returned an error, so `dev->private` might be `NULL`.  Check for that
before dereferencing it.

Also, as pointed out by Dan Carpenter, there is no need to check the
pointer passed to `kfree()` is non-NULL, so remove that check.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfs: fix do_div() warning by instead using sector_div()

commit 3873d064b8538686bbbd4b858dc8a07db1f7f43a upstream.

When compiling a 32bit kernel with CONFIG_LBDAF=n the compiler complains like
shown below.  Fix this warning by instead using sector_div() which is provided
by the kernel.h header file.

fs/nfs/blocklayout/extents.c: In function ‘normalize’:
include/asm-generic/div64.h:43:28: warning: comparison of distinct pointer types lacks a cast [enabled by default]
fs/nfs/blocklayout/extents.c:47:13: note: in expansion of macro ‘do_div’
nfs/blocklayout/extents.c:47:2: warning: right shift count >= width of type [enabled by default]
fs/nfs/blocklayout/extents.c:47:2: warning: passing argument 1 of ‘__div64_32’ from incompatible pointer type [enabled by default]
include/asm-generic/div64.h:35:17: note: expected ‘uint64_t *’ but argument is of type ‘sector_t *’
 extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm table: fail dm_table_create on dm_round_up overflow

commit 5b2d06576c5410c10d95adfd5c4d8b24de861d87 upstream.

The dm_round_up function may overflow to zero.  In this case,
dm_table_create() must fail rather than go on to allocate an empty array
with alloc_targets().

This fixes a possible memory corruption that could be caused by passing
too large a number in "param->target_count".

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm delay: fix a possible deadlock due to shared workqueue

commit 718822c1c112dc99e0c72c8968ee1db9d9d910f0 upstream.

The dm-delay target uses a shared workqueue for multiple instances.  This
can cause deadlock if two or more dm-delay targets are stacked on the top
of each other.

This patch changes dm-delay to use a per-instance workqueue.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm bufio: initialize read-only module parameters

commit 4cb57ab4a2e61978f3a9b7d4f53988f30d61c27f upstream.

Some module parameters in dm-bufio are read-only. These parameters
inform the user about memory consumption. They are not supposed to be
changed by the user.

However, despite being read-only, these parameters can be set on
modprobe or insmod command line, for example:
modprobe dm-bufio current_allocated_bytes=12345

The kernel doesn't expect that these variables can be non-zero at module
initialization and if the user sets them, it results in BUG.

This patch initializes the variables in the module init routine, so that
user-supplied values are ignored.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86, efi: Don't use (U)EFI time services on 32 bit

commit 04bf9ba720fcc4fa313fa122b799ae0989b6cd50 upstream.

UEFI time services are often broken once we're in virtual mode. We were
already refusing to use them on 64-bit systems, but it turns out that
they're also broken on some 32-bit firmware, including the Dell Venue.
Disable them for now, we can revisit once we have the 1:1 mappings code
incorporated.

Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Link: http://lkml.kernel.org/r/1385754283-2464-1-git-send-email-matthew.garrett@nebula.com
Cc: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fixup bad vram size on SI

commit 0ca223b029a261e82fb2f50c52eb85d510f4260e upstream.

Some boards seem to have garbage in the upper
16 bits of the vram size register.  Check for
this and clamp the size properly.  Fixes
boards reporting bogus amounts of vram.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: don't attempt to reorder multicast frames

commit 051a41fa4ee14f5c39668f0980973b9a195de560 upstream.

Multicast frames can't be transmitted as part of an aggregation
session (such a session couldn't even be set up) so don't try to
reorder them. Trying to do so would cause the reorder to stop
working correctly since multicast QoS frames (as transmitted by
the Aruba APs this was found with) would cause sequence number
confusion in the buffer.

Reported-by: Blaise Gassend <blaise@suitabletech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: handle TCP SYN-ACK packets correctly in selinux_ip_postroute()

commit 446b802437f285de68ffb8d6fac3c44c3cab5b04 upstream.

In selinux_ip_postroute() we perform access checks based on the
packet's security label.  For locally generated traffic we get the
packet's security label from the associated socket; this works in all
cases except for TCP SYN-ACK packets.  In the case of SYN-ACK packet's
the correct security label is stored in the connection's request_sock,
not the server's socket.  Unfortunately, at the point in time when
selinux_ip_postroute() is called we can't query the request_sock
directly, we need to recreate the label using the same logic that
originally labeled the associated request_sock.

See the inline comments for more explanation.

Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Tested-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: handle TCP SYN-ACK packets correctly in selinux_ip_output()

commit 47180068276a04ed31d24fe04c673138208b07a9 upstream.

In selinux_ip_output() we always label packets based on the parent
socket.  While this approach works in almost all cases, it doesn't
work in the case of TCP SYN-ACK packets when the correct label is not
the label of the parent socket, but rather the label of the larval
socket represented by the request_sock struct.

Unfortunately, since the request_sock isn't queued on the parent
socket until *after* the SYN-ACK packet is sent, we can't lookup the
request_sock to determine the correct label for the packet; at this
point in time the best we can do is simply pass/NF_ACCEPT the packet.
It must be said that simply passing the packet without any explicit
labeling action, while far from ideal, is not terrible as the SYN-ACK
packet will inherit any IP option based labeling from the initial
connection request so the label *should* be correct and all our
access controls remain in place so we shouldn't have to worry about
information leaks.

Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Tested-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/rtc/rtc-at91rm9200.c: correct alarm over day/month wrap

commit eb3c227289840eed95ddfb0516046f08d8993940 upstream.

Update month and day of month to the alarm month/day instead of current
day/month when setting the RTC alarm mask.

Signed-off-by: Linus Pizunski <linus@narrativeteam.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: usbtouchscreen - separate report and transmit buffer size handling

commit 4ef38351d770cc421f4a0c7a849fd13207fc5741 upstream.

This patch supports the separate handling of the USB transfer buffer length
and the length of the buffer used for multi packet support. For devices
supporting multiple report or diagnostic packets, the USB transfer size is now
limited to the USB endpoints wMaxPacketSize - otherwise it defaults to the
configured report packet size as before.

This fixes an issue where event reporting can be delayed for an arbitrary
time for multi packet devices. For instance the report size for eGalax devices
is defined to the 16 byte maximum diagnostic packet size as opposed to the 5
byte report packet size. In case the driver requests 16 byte from the USB
interrupt endpoint, the USB host controller driver needs to split up the
request into 2 accesses according to the endpoints wMaxPacketSize of 8 byte.
When the first transfer is answered by the eGalax device with not less than
the full 8 byte requested, the host controller has got no way of knowing
whether the touch controller has got additional data queued and will issue
the second transfer. If per example a liftoff event finishes at such a
wMaxPacketSize boundary, the data will not be available to the usbtouch driver
until a further event is triggered and transfered to the host. From user
perspective the BTN_TOUCH release event in this case is stuck until the next
touch down event.

Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: option: support new huawei devices

commit 2bf308d7bc5e8cdd69672199f59532f35339133c upstream.

Add new supporting declarations to option.c, to support Huawei new
devices with new bInterfaceProtocol value.

Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: blacklist interface 1 for Huawei E173s-6

commit 8f173e22abf2258ddfa73f46eadbb6a6c29f1631 upstream.

Interface 1 on this device isn't for option to bind to otherwise an oops
on usb_wwan with log flooding will happen when accessing the port:

tty_release: ttyUSB1: read/write wait queue active!

It doesn't seem to respond to QMI if it's added to qmi_wwan so don't add
it there - it's likely used by the card reader.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: composite: reset delayed_status on reset_config

commit 2bac51a1827a18821150ed8c9f9752c02f9c2b02 upstream.

The delayed_status value is used to keep track of status response
packets on ep0. It needs to be reset or the set_config function would
still delay the answer, if the usb device got unplugged while waiting
for setup_continue to be called.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: fix implementation of endpoint wedge

commit a535d81c92615b8ffb99b7e1fd1fb01effaed1af upstream.

The dwc3 UDC driver doesn't implement endpoint wedging correctly.
When an endpoint is wedged, the gadget driver should be allowed to
clear the wedge by calling usb_ep_clear_halt().  Only the host is
prevented from resetting the endpoint.

This patch fixes the implementation.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: hub: Use correct reset for wedged USB3 devices that are NOTATTACHED

commit 2d51f3cd11f414c56a87dc018196b85fd50b04a4 upstream.

This patch adds a check for USB_STATE_NOTATTACHED to the
hub_port_warm_reset_required() workaround for ports that end up in
Compliance Mode in hub_events() when trying to decide which reset
function to use. Trying to call usb_reset_device() with a NOTATTACHED
device will just fail and leave the port broken.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

futex: fix handling of read-only-mapped hugepages

commit f12d5bfceb7e1f9051563381ec047f7f13956c3c upstream.

The hugepage code had the exact same bug that regular pages had in
commit 7485d0d3758e ("futexes: Remove rw parameter from
get_futex_key()").

The regular page case was fixed by commit 9ea71503a8ed ("futex: Fix
regression with read only mappings"), but the transparent hugepage case
(added in a5b338f2b0b1: "thp: update futex compound knowledge") case
remained broken.

Found by Dave Jones and his trinity tool.

Reported-and-tested-by: Dave Jones <davej@fedoraproject.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: underflow bug in xfs_attrlist_by_handle()

commit 31978b5cc66b8ba8a7e8eef60b12395d41b7b890 upstream.

If we allocate less than sizeof(struct attrlist) then we end up
corrupting memory or doing a ZERO_PTR_SIZE dereference.

This can only be triggered with CAP_SYS_ADMIN.

Reported-by: Nico Golde <nico@ngolde.de>
Reported-by: Fabian Yamaguchi <fabs@goesec.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (w83l786ng) Fix fan speed control mode setting and reporting

commit cf7559bc053471f32373d71d04a9aa19e0b48d59 upstream.

The wrong mask is used, which causes some fan speed control modes
(pwmX_enable) to be incorrectly reported, and some modes to be
impossible to set.

[JD: add subject and description.]

Signed-off-by: Brian Carnes <bmcarnes@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: Improve create VCPU parameter (CVE-2013-4587)

commit 338c7dbadd2671189cec7faf64c84d01071b3f96 upstream.

In multiple functions the vcpu_id is used as an offset into a bitfield.  Ag
malicious user could specify a vcpu_id greater than 255 in order to set or
clear bits in kernel memory.  This could be used to elevate priveges in the
kernel.  This patch verifies that the vcpu_id provided is less than 255.
The api documentation already specifies that the vcpu_id must be less than
max_vcpus, but this is currently not checked.

Reported-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 7913/1: fix framepointer check in unwind_frame

commit 3abb6671a9c04479c4bd026798a05f857393b7e2 upstream.

This patch fixes corner case when (fp + 4) overflows unsigned long,
for example: fp = 0xFFFFFFFF -> fp + 4 == 3.

Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 7912/1: check stack pointer in get_wchan

commit 1b15ec7a7427d4188ba91b9bbac696250a059d22 upstream.

get_wchan() is lockless. Task may wakeup at any time and change its own stack,
thus each next stack frame may be overwritten and filled with random stuff.

/proc/$pid/stack interface had been disabled for non-current tasks, see [1]
But 'wchan' still allows to trigger stack frame unwinding on volatile stack.

This patch fixes oops in unwind_frame() by adding stack pointer validation on
each step (as x86 code do), unwind_frame() already checks frame pointer.

Also I've found another report of this oops on stackoverflow (irony).

Link: http://www.spinics.net/lists/arm-kernel/msg110589.html
Link: http://stackoverflow.com/questions/18479894/unwind-frame-cause-a-kernel-paging-error
Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP3: hwmod data: Don't prevent RESET of USB Host module

commit 7f4d3641e2548d1ac5dee837ff434df668a2810c upstream.

Unlike what the comment states, errata i660 does not state that we
can't RESET the USB host module. Instead it states that RESET is the
only way to recover from a deadlock situation.

RESET ensures that the module is in a known good state irrespective
of what bootloader does with the module, so it must be done at boot.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> # Panda, BeagleXM
Fixes: de231388cb80 ("ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3")
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: pxa: tosa: fix keys mapping

commit 506cac15ac86f204b83e3cfccde73eeb4e7c5f34 upstream.

When converting from tosa-keyboard driver to matrix keyboard, tosa keys
received extra 1 column shift. Replace that with correct values to make
keyboard work again.

Fixes: f69a6548c9d5 ('[ARM] pxa/tosa: make use of the matrix keypad driver')
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: memalloc.h - fix wrong truncation of dma_addr_t

commit 932e9dec380c67ec15ac3eb073bb55797d8b4801 upstream.

When running a 32bit kernel the hda_intel driver is still reporting
a 64bit dma_mask if the HW supports it.

From sound/pci/hda/hda_intel.c:

        /* allow 64bit DMA address if supported by H/W */
        if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
                pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
        else {
                pci_set_dma_mask(pci, DMA_BIT_MASK(32));
                pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32));
        }

which means when there is a call to dma_alloc_coherent from
snd_malloc_dev_pages a machine address bigger than 32bit can be returned.
This can be true in particular if running  the 32bit kernel as a pv dom0
under the Xen Hypervisor or PAE on bare metal.

The problem is that when calling setup_bdle to program the BLE the
dma_addr_t returned from the dma_alloc_coherent is wrongly truncated
from snd_sgbuf_get_addr if running a 32bit kernel:

static inline dma_addr_t snd_sgbuf_get_addr(struct snd_dma_buffer *dmab,
                                           size_t offset)
{
        struct snd_sg_buf *sgbuf = dmab->private_data;
        dma_addr_t addr = sgbuf->table[offset >> PAGE_SHIFT].addr;
        addr &= PAGE_MASK;
        return addr + offset % PAGE_SIZE;
}

where PAGE_MASK in a 32bit kernel is zeroing the upper 32bit af addr.

Without this patch the HW will fetch the 32bit truncated address,
which is not the one obtained from dma_alloc_coherent and will result
to a non working audio but can corrupt host memory at a random location.

The current patch apply to v3.13-rc3-74-g6c843f5

Signed-off-by: Stefano Panella <stefano.panella@citrix.com>
Reviewed-by: Frediano Ziglio <frediano.ziglio@citrix.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: DMA: For BMIPS5000 cores flush region just like non-coherent R10000

commit f86f55d3ad21b21b736bdeb29bee0f0937b77138 upstream.

The BMIPS5000 (Zephyr) processor utilizes instruction speculation. A
stale misprediction address in either the JTB or the CRS may trigger
a prefetch inside a region that is currently being used by a DMA engine,
which is not IO-coherent.  This prefetch will fetch a line into the
scache, and that line will soon become stale (ie wrong) during/after the
DMA.  Mayhem ensues.

In dma-default.c, the r10000 is handled as a special case in the same way
that we want to handle Zephyr.  So we generalize the exception cases into
a function, and include Zephyr as one of the processors that needs this
special care.

Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/5776/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: John Ulvr <julvr@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.74

crypto: scatterwalk - Use sg_chain_ptr on chain entries

commit 389a5390583a18e45bc4abd4439291abec5e7a63 upstream.

Now that scatterwalk_sg_chain sets the chain pointer bit the sg_page
call in scatterwalk_sg_next hits a BUG_ON when CONFIG_DEBUG_SG is
enabled. Use sg_chain_ptr instead of sg_page on a chain entry.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/char/i8k.c: add Dell XPLS L421X

commit 9aa5b0181bdf335f0b731d8502e128a862884bcd upstream.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=60772

Signed-off-by: Alan Cox <alan@linux.intel.com>
Reported-by: Leho Kraav <leho@kraav.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-acm: Added support for the Lenovo RD02-D400 USB Modem

commit 3b59d16c513da258ec8f6a0b4db85f257a0380d6 upstream.

Signed-off-by: David Cluytens <david.cluytens@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: spcp8x5: correct handling of CS5 setting

commit 711fbdfbf2bc4827214a650afe3f64767a1aba16 upstream.

This patch removes an erroneous check of CSIZE, which made it impossible to set
CS5.

Compiles clean, but couldn't test against hardware.

Signed-off-by: Colin Leitner <colin.leitner@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: mos7840: correct handling of CS5 setting

commit 78692cc3382e0603a47e1f2aaeffe0d99891994d upstream.

This patch removes an erroneous check of CSIZE, which made it impossible to set
CS5.

Compiles clean, but couldn't test against hardware.

Signed-off-by: Colin Leitner <colin.leitner@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: pl2303: fixed handling of CS5 setting

commit a313249937820f8b1996133fc285efbd6aad2c5b upstream.

This patch fixes the CS5 setting on the PL2303 USB-to-serial devices. CS5 has a
value of 0 and the CSIZE setting has been skipped altogether by the enclosing
if. Tested on 3.11.6 and the scope shows the correct output after the fix has
been applied.

Tagged to be added to stable, because it fixes a user visible driver bug and is
simple enough to backport easily.

Signed-off-by: Colin Leitner <colin.leitner@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: i801: SMBus patch for Intel Avoton DeviceIDs

commit c2db409cbc8751ccc7e6d2cc2e41af0d12ea637f upstream.

This patch adds the PCU SMBus DeviceID for the Intel Avoton SOC.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: "Ong, Boon Leong" <boon.leong.ong@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ahci: AHCI-mode SATA patch for Intel Avoton DeviceIDs

commit 29e674dd5c8e781589f09c3ee139c80f6da274e4 upstream.

This patch adds the AHCI and RAID-mode SATA DeviceIDs for the Intel Avoton SOC.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ahci: Add Device IDs for Intel Lynx Point-LP PCH

commit 77b12bc9cf7b10c7c1a04ca45272fbb4287902d0 upstream.

This patch adds the AHCI-mode SATA Device IDs for the Intel Lynx Point-LP PCH

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

um: add missing declaration of 'getrlimit()' and friends

commit fdfa4c952844fce881df8c76de9c7180cbe913ab upstream.

arch/um/os-Linux/start_up.c: In function 'check_coredump_limit':
arch/um/os-Linux/start_up.c:338:16: error: storage size of 'lim' isn't known
arch/um/os-Linux/start_up.c:339:2: error: implicit declaration of function 'getrlimit' [-Werror=implicit-function-declaration]

Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
CC: Jeff Dike <jdike@addtoit.com>
CC: Richard Weinberger <richard@nod.at>
CC: Al Viro <viro@zeniv.linux.org.uk>
CC: user-mode-linux-devel@lists.sourceforge.net
CC: user-mode-linux-user@lists.sourceforge.net
CC: linux-kernel@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: mousedev - allow disabling even without CONFIG_EXPERT

commit dfaaed08ecc01bd513248ba7999daf50ce028352 upstream.

Moust (if not all) modern software, including X, uses /dev/eventX rather than
the legacy /dev/mouseX devices. It therefore makes sense for general-purpose
(distro) kernels to use MOUSEDV=m (or even n), so let's drop the EXPERT=y
requirement.

Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>