Lennart Poettering [Wed, 9 Aug 2017 07:47:33 +0000 (09:47 +0200)]
Merge pull request #6568 from sourcejedi/test
sd-login: test - fix failure when run from non-graphical seat
Zbigniew Jędrzejewski-Szmek [Wed, 9 Aug 2017 07:45:02 +0000 (03:45 -0400)]
Add rpm macro %_userpresetdir (#6571)
https://bugzilla.redhat.com/show_bug.cgi?id=1479580
bengal [Tue, 8 Aug 2017 16:55:31 +0000 (18:55 +0200)]
dhcp-network: adjust sockaddr length for addresses longer than 8 bytes (#6527)
An infiniband hardware address is 20 bytes, but sockaddr_ll.sll_addr is only 8
bytes. Explicitly ensure that sockaddr_union has enough space for infiniband
addresses, even if they run over sockaddr_ll and add a macro to compute the
proper size to pass to kernel.
Alan Jenkins [Tue, 8 Aug 2017 15:13:52 +0000 (16:13 +0100)]
sd-login: test - fix failure when run from non-graphical seat
Observed when running from the console of a systemd nspawn container
(see failure below).
The value of r was tested, when r was last set by
sd_session_can_graphical(). This did not correspond to the value expected.
Fix the code, so we compare relevant values now. Hopefully :).
Test failure
------------
/* Information printed is from the live system */
sd_pid_get_unit(0, …) → "session-13.scope"
sd_pid_get_user_unit(0, …) → "n/a"
sd_pid_get_slice(0, …) → "user-1000.slice"
sd_pid_get_session(0, …) → "13"
sd_pid_get_owner_uid(0, …) → 1000
sd_pid_get_cgroup(0, …) → "/user.slice/user-1000.slice/session-13.scope"
sd_uid_get_display(1000, …) → "13"
sd_uid_get_sessions(1000, …) → [2] "15 13"
sd_uid_get_seats(1000, …) → [1] "seat0"
sd_session_is_active("13") → yes
sd_session_is_remote("13") → no
sd_session_get_state("13") → "active"
sd_session_get_uid("13") → 1000
sd_session_get_type("13") → "tty"
sd_session_get_class("13") → "user"
sd_session_get_display("13") → "n/a"
sd_session_get_remote_user("13") → "n/a"
sd_session_get_remote_host("13") → "n/a"
sd_session_get_seat("13") → "seat0"
sd_session_can_multi_seat("seat0") → no
sd_session_can_tty("seat0") → no
sd_session_can_graphical("seat0") → no
sd_uid_get_state(1000, …) → active
Assertion '!!k == !!r' failed at ../src/libsystemd/sd-login/test-login.c:191, function test_login(). Aborting.
Alan Jenkins [Tue, 8 Aug 2017 14:54:15 +0000 (15:54 +0100)]
sd-login: test - fix function name in output
Torstein Husebø [Tue, 8 Aug 2017 14:05:29 +0000 (16:05 +0200)]
treewide: fix typos (#6566)
Evgeny Vereshchagin [Tue, 8 Aug 2017 06:42:51 +0000 (09:42 +0300)]
sd-bus: free everything when bus_set_address_user fails (#6552)
Fixes:
```
$ env -i valgrind --leak-check=full ./build/test-bus-chat
...
==7763== 1,888 (1,824 direct, 64 indirect) bytes in 1 blocks are
definitely lost in loss record 2 of 2
==7763== at 0x4C2FA50: calloc (vg_replace_malloc.c:711)
==7763== by 0x4F8FF9A: sd_bus_new (sd-bus.c:175)
==7763== by 0x4F938BF: sd_bus_open_user (sd-bus.c:1138)
==7763== by 0x109ACD: server_init (test-bus-chat.c:70)
==7763== by 0x10BCF8: main (test-bus-chat.c:526)
==7763==
```
Closes #6481
Xiang Fan [Tue, 8 Aug 2017 06:41:15 +0000 (01:41 -0500)]
rules: split the rfkill subsystem rule (#6556)
This patch makes sure both rules are applied to rfkill devices.
Otherwise the ENV rule may be skipped if path_id fails.
Fixes: #6528
Benjamin Robin [Mon, 7 Aug 2017 09:29:20 +0000 (11:29 +0200)]
build-sys: Fix Makefile wrapper for install target (#6548)
Jouke Witteveen [Mon, 7 Aug 2017 09:27:24 +0000 (11:27 +0200)]
core: propagate reload from RELOADING=1 notification (#6550)
Evgeny Vereshchagin [Mon, 7 Aug 2017 09:06:07 +0000 (12:06 +0300)]
tests: use ninja-build if ninja is not available (#6544)
This makes the tests work on CentOS, which currently has ninja-build
only.
Yu Watanabe [Mon, 7 Aug 2017 09:02:47 +0000 (18:02 +0900)]
man: DynamicUser= does not imply PrivateDevices= (#6510)
Follow-up for
effbd6d2eadb61bd236d118afc7901940c4c6b37.
Lennart Poettering [Mon, 7 Aug 2017 08:52:27 +0000 (10:52 +0200)]
Merge pull request #6549 from yuwata/pedantic-checks
journal-remote: remove MHD_USE_PEDANTIC_CHECKS from the default flags
Yu Watanabe [Mon, 7 Aug 2017 01:35:05 +0000 (10:35 +0900)]
microhttpd-util: add comment
Zbigniew Jędrzejewski-Szmek [Sun, 6 Aug 2017 20:19:49 +0000 (16:19 -0400)]
Merge pull request #6536 from yuwata/fix-warning
Core: cleanups
Yu Watanabe [Sun, 6 Aug 2017 14:34:55 +0000 (23:34 +0900)]
core: do not ignore returned values
Yu Watanabe [Sun, 6 Aug 2017 14:25:41 +0000 (23:25 +0900)]
journal-remote: remove MHD_USE_PEDANTIC_CHECKS from the default flags
Follow-up for
010585873454d07625ee962ffa2ef2823624bfbe.
Luca Bruno [Sun, 6 Aug 2017 13:24:24 +0000 (13:24 +0000)]
core: evaluate presets after generators have run (#6526)
This commit moves the first-boot system preset-settings evaluation out
of main and into the manager startup logic itself. Notably, it reverses
the order between generators and presets evaluation, so that any changes
performed by first-boot generators are taken into the account by presets
logic.
After this change, units created by a generator can be enabled as part
of a preset.
Yu Watanabe [Mon, 31 Jul 2017 23:55:15 +0000 (08:55 +0900)]
core: replace strcmp() == 0 with streq()
Yu Watanabe [Fri, 21 Jul 2017 12:29:59 +0000 (21:29 +0900)]
core: fix typo
Yu Watanabe [Wed, 2 Aug 2017 05:38:08 +0000 (14:38 +0900)]
core: define variables only when they are required
Follow-up for
7f18ef0a555a3c3cef08e0965dc453fe5954b5a7.
Yu Watanabe [Sun, 6 Aug 2017 00:37:25 +0000 (09:37 +0900)]
bus-util: do not print (uint64_t) -1 as is (#6522)
Closes #4295 and #6511.
Alan Jenkins [Sat, 5 Aug 2017 23:25:19 +0000 (00:25 +0100)]
test-condition: fix test_condition_test_group() (#6531)
I hit a test failure with the `max_gid+1` test. Problem is that we loop
over 0..r, but set `r` again within the loop (to 1). So max_gid is only
set based on the first supplementary GID.
ConditionGroup=1000 → 1
ConditionGroup=4 → 1
ConditionGroup=adm → 1
ConditionGroup=1001 → 1
Assertion 'r == 0' failed at ../src/test/test-condition.c:462, function
test_condition_test_group(). Aborting.
$ id
uid=1000(alan-sysop) gid=1000(alan-sysop) groups=1000(alan-sysop),4(adm),
10(wheel),1001(sshlogin)
dkg [Sat, 5 Aug 2017 23:19:09 +0000 (19:19 -0400)]
man: document socket requirement for systemd-socket-proxyd (#6535)
Without this requirement, if proxy-to-nginx.socket was down, and the sysadmin
were to do:
systemctl start proxy-to-nginx.service
then the service would come up without a configured socket, which doesn't make
sense. Normally this isn't how we expect a socket-activated service to start,
but it's possible for an admin to do this (if the .socket were already running,
the systemd-socket-proxyd process will start effectively idle). But the
.service shouldn't end up in a broken state if the .socket isn't already
listening.
Adding the explicit Requires: should ensure that an admin with this
configuration state can't accidentally break their system.
Mike Gilbert [Sat, 5 Aug 2017 22:30:37 +0000 (18:30 -0400)]
Revert "README: document that gperf 3.1 is required for building now" (#6541)
This reverts commit
4f5e972279d9ee6192930a0392f49cae9ad45daa.
Building with gperf 3.0 works just fine; we had an autoconf check to
determine the correct data types, and this check was ported to meson.
Martin Pitt [Fri, 4 Aug 2017 12:34:14 +0000 (14:34 +0200)]
test: Factorize common integration test functions (#6540)
All test/TEST* but TEST-02-CRYPTSETUP share the same check_result_qemu()
and test_cleanup(), so move them into test_functions and only override
them in TEST-02-CRYPTSETUP.
Also provide a common test_run() which by default assumes that both QEMU
and nspawn tests are run. Particular tests which don't support either
need to explicitly opt out by setting $TEST_NO_{QEMU,NSPAWN}. Do it this
way around to avoid accidentally forgetting to opt in, and to encourage
test authors to at least always support nspawn.
Evgeny Vereshchagin [Fri, 4 Aug 2017 11:54:47 +0000 (14:54 +0300)]
Merge pull request #6518 from joukewitteveen/process-rename
process-util: update the end pointer of the process name on rename
Jouke Witteveen [Thu, 3 Aug 2017 20:31:46 +0000 (22:31 +0200)]
test-process-util: test multiple invocations of rename_process
Jouke Witteveen [Wed, 2 Aug 2017 15:08:31 +0000 (17:08 +0200)]
process-util: update the end pointer of the process name on rename (#6492)
We only updated the end pointer when allocating new memory, i.e. on the first
call to rename_process.
Jakub Wilk [Thu, 3 Aug 2017 21:36:21 +0000 (23:36 +0200)]
man: fix typos (#6532)
Yu Watanabe [Thu, 3 Aug 2017 12:01:38 +0000 (21:01 +0900)]
meson: fix modprobedir (#6523)
Follow-up for
582faeb461aa0dd01b55bf6c9b1433532fc927d3.
Lennart Poettering [Wed, 2 Aug 2017 14:39:54 +0000 (16:39 +0200)]
Revert "units: set ConditionVirtualization=!private-users on journald audit socket" (#6513)
* Revert "modprobe.d: ship drop-in to set bonding max_bonds to 0 (#6448)"
This reverts commit
582faeb461aa0dd01b55bf6c9b1433532fc927d3.
* Revert "units: set ConditionVirtualization=!private-users on journald audit socket (#6508)"
This reverts commit
d2a1ba103b4ea22764953d795c36db3d492d50c9.
Dimitri John Ledkov [Wed, 2 Aug 2017 12:41:18 +0000 (13:41 +0100)]
modprobe.d: ship drop-in to set bonding max_bonds to 0 (#6448)
This allows networkd to correctly manage bond0 using networkd, when requested
by the user.
Fixes #5971 #6184
Dimitri John Ledkov [Wed, 2 Aug 2017 08:15:26 +0000 (09:15 +0100)]
units: set ConditionVirtualization=!private-users on journald audit socket (#6508)
It fails to start in an unprivileged container as audit is not namespace aware.
Jan Synacek [Wed, 2 Aug 2017 08:12:33 +0000 (10:12 +0200)]
scsi_id: add missing options to getopt_long() (#6501)
Susant Sahani [Tue, 1 Aug 2017 07:44:08 +0000 (07:44 +0000)]
networkd: add scope to address section (#6449)
This work allows to configure address Scope to
host | link | global or a number.
Closes #6446
Lennart Poettering [Tue, 1 Aug 2017 07:43:41 +0000 (09:43 +0200)]
Merge pull request #6420 from keszybz/gateway-name
Rename "gateway" to "_gateway" and other resolved changes
Fabio Kung [Tue, 1 Aug 2017 07:15:18 +0000 (00:15 -0700)]
core: check which MACs to use before a new mount ns is created (#6498)
/sys is not guaranteed to exist when a new mount namespace is created.
It is only mounted under conditions specified by
`namespace_info_mount_apivfs`.
Checking if the three available MAC LSMs are enabled requires a sysfs
mounted at /sys, so the checks are moved to before a new mount ns is
created.
Zbigniew Jędrzejewski-Szmek [Tue, 11 Jul 2017 12:50:56 +0000 (08:50 -0400)]
resolved: add debug message about stub listener
Zbigniew Jędrzejewski-Szmek [Tue, 11 Jul 2017 06:15:08 +0000 (02:15 -0400)]
resolved,nss-myhostname: use _gateway for the gateway
This changes the symbolic name for the default gateway from "gateway" to
"_gateway". A new configuration option -Dcompat-gateway-hostname=true|false
is added. If it is set, the old name is also supported, but the new name
is used as the canonical name in either case. This is intended as a temporary
measure to make the transition easier, and the option should be removed
after a few releases, at which point only the new name will be used.
The old "gateway" name mostly works OK, but hasn't gained widespread acceptance
because of the following (potential) conflicts:
- it is completely legal to have a host called "gateway"
- there is no guarantee that "gateway" will not be registered as a TLD, even
though this currently seems unlikely. (Even then, there would be no
conflict except for the case when the top-level domain itself was being resolved.
The "gateway" or "_gateway" labels have only special meaning when the
whole name consists of a single label, so resolution of any subdomain
of the hypothetical gateway. TLD would still work OK. )
Moving to "_gateway" avoids those issues because underscores are not allowed
in host names (RFC 1123, §2.1) and avoids potential conflicts with local or
global names.
v2:
- simplify the logic to hardcode "_gateway" and allow
-Dcompat-gateway-hostname=true as a temporary measure.
Lennart Poettering [Mon, 31 Jul 2017 18:01:05 +0000 (20:01 +0200)]
Merge pull request #6392 from poettering/journal-cache
add limited metadata caching to journald and other journal improvements
Lennart Poettering [Mon, 17 Jul 2017 21:36:35 +0000 (23:36 +0200)]
journald: add minimal client metadata caching
Cache client metadata, in order to be improve runtime behaviour under
pressure.
This is inspired by @vcaputo's work, specifically:
https://github.com/systemd/systemd/pull/2280
That code implements related but different semantics.
For a longer explanation what this change implements please have a look
at the long source comment this patch adds to journald-context.c.
After this commit:
# time bash -c 'dd bs=$((1024*1024)) count=$((1*1024)) if=/dev/urandom | systemd-cat'
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 11.2783 s, 95.2 MB/s
real 0m11.283s
user 0m0.007s
sys 0m6.216s
Before this commit:
# time bash -c 'dd bs=$((1024*1024)) count=$((1*1024)) if=/dev/urandom | systemd-cat'
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 52.0788 s, 20.6 MB/s
real 0m52.099s
user 0m0.014s
sys 0m7.170s
As side effect, this corrects the journal's rate limiter feature: we now
always use the unit name as key for the ratelimiter.
Lennart Poettering [Thu, 20 Jul 2017 12:17:30 +0000 (14:17 +0200)]
string-util: optimize strshorten() a bit
There's no reason to determine the full length of the string, it's
sufficient to know whether it is larger than the intended size...
Lennart Poettering [Thu, 20 Jul 2017 12:14:55 +0000 (14:14 +0200)]
alloc-util: add new helpers memdup_suffix0() and newdup_suffix0()
These are similar to memdup() and newdup(), but reserve one extra NUL
byte at the end of the new allocation and initialize it. It's useful
when copying out data from fixed size character arrays where NUL
termination can't be assumed.
Lennart Poettering [Thu, 20 Jul 2017 09:38:15 +0000 (11:38 +0200)]
string-util: add strlen_ptr() helper
strlen_ptr() is to strlen() what streq_ptr() is to streq(): i.e. it
handles NULL strings in a smart way.
Lennart Poettering [Mon, 17 Jul 2017 21:35:25 +0000 (23:35 +0200)]
process-util: slightly optimize querying of our own process metadata
When we are checking our own data, we can optimize things a bit.
Lennart Poettering [Fri, 14 Jul 2017 17:03:32 +0000 (19:03 +0200)]
journald: only accept valid unit names for log streams
Let's be a bit stricter in what we end up logging: ignore invalid unit
name specifications. Let's validate all input!
As we ignore unit names passed in from unprivileged clients anyway the
effect of this additional check is minimal.
(Also, no need to initialize the identifier/unit_id fields of stream
objects to NULL if empty strings are passed, the default is NULL
anyway...)
Lennart Poettering [Fri, 14 Jul 2017 17:01:25 +0000 (19:01 +0200)]
journald: add comment explaining journal rate limit return codes
This is not obvious, hence let's add a comment.
Lennart Poettering [Fri, 14 Jul 2017 16:59:41 +0000 (18:59 +0200)]
execute: don't pass unit ID in --user mode to journald for stream logging
When we create a log stream connection to journald, we pass along the
unit ID. With this change we do this only when we run as system
instance, not as user instance, to remove the ambiguity whether a user
or system unit is specified. The effect of this change is minor:
journald ignores the field anyway from clients with UID != 0. This patch
hence only fixes the unit attribution for the --user instance of the
root user.
Lennart Poettering [Fri, 14 Jul 2017 16:58:57 +0000 (18:58 +0200)]
execute: make some code shorter
Let's simplify some lines to make it shorter.
Lennart Poettering [Fri, 14 Jul 2017 16:57:54 +0000 (18:57 +0200)]
parse-util: introduce pid_is_valid()
Checking for validity of a PID is relatively easy, but let's add a
helper cal for this too, in order to make things more readable and more
similar to uid_is_valid(), gid_is_valid() and friends.
Lennart Poettering [Fri, 14 Jul 2017 16:57:04 +0000 (18:57 +0200)]
core, sd-bus, logind: make use of uid_is_valid() in more places
Lennart Poettering [Fri, 14 Jul 2017 16:42:17 +0000 (18:42 +0200)]
audit: introduce audit_session_is_valid() and make use of it everywhere
Let's add a proper validation function, since validation isn't entirely
trivial. Make use of it where applicable. Also make use of
AUDIT_SESSION_INVALID where we need a marker for an invalid audit
session.
Lennart Poettering [Fri, 14 Jul 2017 16:39:18 +0000 (18:39 +0200)]
escape: fix systemd-escape description text
The long man page paragraph got it right: the tool is for escaping systemd unit
names, not just system unit names. Also fix the short man page paragraph
and the --help text.
Follow-up for
303608c1bcf9568371625fbbd9442946cadba422
Nicolas Iooss [Mon, 31 Jul 2017 15:45:33 +0000 (17:45 +0200)]
namespace: keep selinuxfs mounted read-write with ProtectKernelTunables (#5741)
When a service unit uses "ProtectKernelTunables=yes", it currently
remounts /sys/fs/selinux read-only. This makes libselinux report SELinux
state as "disabled", because most SELinux features are not usable. For
example it is not possible to validate security contexts (with
security_check_context_raw() or /sys/fs/selinux/context). This behavior
of libselinux has been described in
http://danwalsh.livejournal.com/73099.html and confirmed in a recent
email, https://marc.info/?l=selinux&m=
149220233032594&w=2 .
Since commit
0c28d51ac849 ("units: further lock down our long-running
services"), systemd-localed unit uses ProtectKernelTunables=yes.
Nevertheless this service needs to use libselinux API in order to create
/etc/vconsole.conf, /etc/locale.conf... with the right SELinux contexts.
This is broken when /sys/fs/selinux is mounted read-only in the mount
namespace of the service.
Make SELinux-aware systemd services work again when they are using
ProtectKernelTunables=yes by keeping selinuxfs mounted read-write.
vliaskov [Mon, 31 Jul 2017 13:59:02 +0000 (15:59 +0200)]
mount-setup: mount xenfs filesystem (#6491)
Abdó Roig-Maranges [Mon, 31 Jul 2017 10:32:09 +0000 (12:32 +0200)]
core: Do not fail perpetual mount units without fragment (#6459)
mount_load does not require fragment files to be present in order to
load mount units which are perpetual, or come from /proc/self/mountinfo.
mount_verify should do the same, otherwise a synthesized '-.mount' would
be marked as failed with "No such file or directory", as it is perpetual
but not marked to come from /proc/self/mountinfo at this point.
This happens for the user instance, and I suspect it was the cause of #5375
for the system instance, without gpt-generator.
Lennart Poettering [Mon, 31 Jul 2017 10:11:48 +0000 (12:11 +0200)]
Merge pull request #6472 from yuwata/journal-gateway-fix
Some journal-gateway and journal-remote related fixes
S. Fan [Mon, 31 Jul 2017 10:10:10 +0000 (05:10 -0500)]
rfkill: fix erroneous behavior when polling the udev monitor (#6489)
Comparing udev_device_get_sysname(device) and sysname will always return
true. We need to check the device received from udev monitor instead.
Also, fd_wait_for_event() sometimes never exits. Better set a timeout
here.
Andrew Soutar [Mon, 31 Jul 2017 06:19:16 +0000 (02:19 -0400)]
cryptsetup: fix infinite timeout (#6486)
0004f698d causes `arg_timeout` to be infinity instead of 0 when timeout=0. The
logic here now matches this change.
Fixes #6381
Zbigniew Jędrzejewski-Szmek [Mon, 31 Jul 2017 06:05:35 +0000 (02:05 -0400)]
core: properly handle deserialization of unknown unit types (#6476)
We just abort startup, without printing any error. Make sure we always
print something, and when we cannot deserialize some unit, just ignore it and
continue.
Fixup for
4bc5d27b942afa83cc3d95debd2ad48d42ac07a8. Without this, we would hang
in daemon-reexec after upgrade.
Martin Pitt [Fri, 28 Jul 2017 09:49:44 +0000 (11:49 +0200)]
Merge pull request #6462 from keszybz/man-tweaks
Some small man page fixes
Zbigniew Jędrzejewski-Szmek [Wed, 26 Jul 2017 20:04:52 +0000 (16:04 -0400)]
man: do not recommend rescue.target for alt-↑
rescue.target does not work well, and we don't have a suitable emergency
shell unit that can be started on existing systems right now. So let's just
remove the recommendation for now.
Fixes #6451.
Zbigniew Jędrzejewski-Szmek [Wed, 26 Jul 2017 19:53:30 +0000 (15:53 -0400)]
man: do not encourgage starting of poweroff/halt/reboot/kexec targets directly
Going through logind and systemd allows polkit to be used,
the job mode will be set properly, and is generally easier
to get correct.
Fixes #6452.
Zbigniew Jędrzejewski-Szmek [Wed, 26 Jul 2017 19:25:50 +0000 (15:25 -0400)]
man: describe which units types are stopped on isolate
Fixes #6455.
Martin Pitt [Fri, 28 Jul 2017 09:09:50 +0000 (11:09 +0200)]
Merge pull request #6365 from keszybz/fast-tests
Make tests faster by default
Martin Pitt [Fri, 28 Jul 2017 07:51:29 +0000 (09:51 +0200)]
Merge pull request #6461 from keszybz/meson-options-fix
Meson options fix
Harald Hoyer [Fri, 28 Jul 2017 07:46:05 +0000 (09:46 +0200)]
boot/efi: don't hard fail on error for tpm measure (#6473)
Display the error for a small amount of time, but don't fail hard.
In case of a faulty BIOS, a TPM error should not prevent the boot.
If something cares about the PCM measurement, it will be noticed
anyway later on.
Especially important now, that TPM measurement is the default now on
some distribution builds.
https://bugzilla.redhat.com/show_bug.cgi?id=1411156
Zbigniew Jędrzejewski-Szmek [Fri, 28 Jul 2017 07:33:43 +0000 (03:33 -0400)]
test-timesync: ignore failure to listen on /run/systemd/netif/links/ (#6463)
Fixes #6353.
Martin Pitt [Fri, 28 Jul 2017 07:29:07 +0000 (09:29 +0200)]
Merge pull request #6465 from keszybz/drop-kdbus
Drop kdbus-dependent code
AsciiWolf [Fri, 28 Jul 2017 07:24:12 +0000 (09:24 +0200)]
mkosi.arch: fix comment (#6470)
libidn -> libidn2
Yu Watanabe [Fri, 28 Jul 2017 07:22:14 +0000 (16:22 +0900)]
journal-remote: use MHD_OPTION_STRICT_FOR_CLIENT if MHD_USE_PEDANTIC_CHECKS is deprecated
The option MHD_OPTION_STRICT_FOR_CLIENT is provided since libmicrohttpd-0.9.54, and
MHD_USE_PEDANTIC_CHECKS will be deprecated in future.
This makes support both option.
Yu Watanabe [Fri, 28 Jul 2017 04:21:34 +0000 (13:21 +0900)]
journal-gateway: use MHD_USE_POLL_INTERNAL_THREAD instead of MHD_USE_POLL
The option MHD_USE_THREAD_PER_CONNECTION requires MHD_USE_POLL_INTERNAL_THREAD
since libmicrohttpd-0.9.53.
If MHD_USE_POLL is used instead of MHD_USE_POLL_INTERNAL_THREAD, then
the library outputs the following warning:
```
Warning: MHD_USE_THREAD_PER_CONNECTION must be used only with
MHD_USE_INTERNAL_POLLING_THREAD. Flag MHD_USE_INTERNAL_POLLING_THREAD was added.
Consider setting MHD_USE_INTERNAL_POLLING_THREAD explicitly.
```
The option MHD_USE_POLL_INTERNAL_THREAD is defined as
`MHD_USE_POLL_INTERNAL_THREAD = MHD_USE_POLL | MHD_USE_INTERNAL_POLLING_THREAD,`
So, let's use MHD_USE_POLL_INTERNAL_THREAD instead of MHD_USE_POLL.
Yu Watanabe [Fri, 28 Jul 2017 04:19:52 +0000 (13:19 +0900)]
journal-remote,gateway: use MHD_USE_TLS instead of MHD_USE_SSL
The option is renamed in libmicrohttpd-0.9.52.
Yu Watanabe [Fri, 28 Jul 2017 03:28:17 +0000 (12:28 +0900)]
units,sysusers: use DynamicUser= for journal-gatewayd and drop user systemd-journal-gateway from sysusers
Yu Watanabe [Thu, 27 Jul 2017 11:22:54 +0000 (20:22 +0900)]
bash-completion: use the first argument instead of the global variable (#6457)
Without this fix:
$ systemctl start <tab>
Display all 135 possibilities? (y or n)
$ __get_startable_units --system | wc -l
224
the number of the suggestions are quite different, as __get_startable_units --system does
not filter already started units. With this fix,
$ systemctl start <tab>
Display all 135 possibilities? (y or n)
$ __get_startable_units --system | wc -l
123
$ __get_template_names --system | wc -l
12
the number of the suggestions matches one the function returns.
For consistency with the other internal functions, it should use the first argument
instead of the global variable $mode.
[zj: add commit message to make it sound like we know what we're doing]
Zbigniew Jędrzejewski-Szmek [Wed, 26 Jul 2017 18:14:44 +0000 (14:14 -0400)]
meson: add empty lines before enabled/disabled status
Those line are long enough to wrap around a few times, and they are
much more legible with some whitespace.
Zbigniew Jędrzejewski-Szmek [Wed, 26 Jul 2017 18:11:15 +0000 (14:11 -0400)]
meson: -D remote and -D importd should be "combo" options
The default should be 'auto', and we allow 'true'
and 'false' too.
Fixes #6445.
Zbigniew Jędrzejewski-Szmek [Wed, 26 Jul 2017 18:09:22 +0000 (14:09 -0400)]
meson: drop unnecesary default value setting
'true' is the default.
Follow-up for
7d77b8880d571447825bb6b0d61683d2e9d58895.
Zbigniew Jędrzejewski-Szmek [Wed, 26 Jul 2017 18:08:46 +0000 (14:08 -0400)]
meson.build: reorder tests to match order in meson_options.txt
This makes it easier to edit both files.
Benjamin Berg [Tue, 25 Jul 2017 01:35:58 +0000 (03:35 +0200)]
hwdb: Add axis range for System76 Galago Pro (galp2) (#6439)
Yu Watanabe [Mon, 24 Jul 2017 23:32:34 +0000 (08:32 +0900)]
basic: cosmetic changes (#6440)
Zbigniew Jędrzejewski-Szmek [Mon, 24 Jul 2017 12:15:45 +0000 (08:15 -0400)]
Merge pull request #6438 from poettering/distro-porting-more
extend README and DISTRO_PORTING a bit
Lennart Poettering [Mon, 24 Jul 2017 09:58:21 +0000 (11:58 +0200)]
Merge pull request #6429 from keszybz/dropins-and-ordering-cycles
Dropin loading and ordering cycle logging improvements
Lennart Poettering [Mon, 24 Jul 2017 09:28:04 +0000 (11:28 +0200)]
README: document that max_bonds=0 is the way to go for bonding.ko
Everything else just is annoying, hence let's list this among the
requirements we make on the kernel in order to minimize confusion
leading to #6184 and suchlike.
Lennart Poettering [Mon, 24 Jul 2017 09:26:54 +0000 (11:26 +0200)]
DISTRO_PORTING: document that distros may/should change fallback DNS as well as fallback NTP if they wish
The DNS and NTP fallback server situation is pretty similar, and
downstream distros might want to change both to whatever they need,
hence mention them both.
Zbigniew Jędrzejewski-Szmek [Mon, 24 Jul 2017 08:41:45 +0000 (04:41 -0400)]
meson: install the git hook (#6425)
This was done autogen.sh previously and was dropped in
72cdb3e783174dcf9223a49f03e3b0e2ca95ddb8. Let's add it back.
The meson configuration step is the only reasonable place.
Note that this only works for the most standard git dirs, e.g.
the hook will not be installed if git worktree is used or if
$GIT_DIR is specified, etc. I think that's OK because most of
the time meson will be run at least once in the original cloned
dir.
Zbigniew Jędrzejewski-Szmek [Sun, 23 Jul 2017 16:03:00 +0000 (12:03 -0400)]
nspawn: do not mount /sys/fs/kdbus
Zbigniew Jędrzejewski-Szmek [Sun, 23 Jul 2017 15:45:57 +0000 (11:45 -0400)]
Drop kdbus bits
Some kdbus_flag and memfd related parts are left behind, because they
are entangled with the "legacy" dbus support.
test-bus-benchmark is switched to "manual". It was already broken before
(in the non-kdbus mode) but apparently nobody noticed. Hopefully it can
be fixed later.
Zbigniew Jędrzejewski-Szmek [Sun, 23 Jul 2017 13:28:45 +0000 (09:28 -0400)]
Drop bus-policy bits
Zbigniew Jędrzejewski-Szmek [Sun, 23 Jul 2017 13:24:39 +0000 (09:24 -0400)]
Drop busname unit type
Since busname units are only useful with kdbus, they weren't actively
used. This was dead code, only compile-tested. If busname units are
ever added back, it'll be cleaner to start from scratch (possibly reverting
parts of this patch).
Zbigniew Jędrzejewski-Szmek [Sat, 22 Jul 2017 19:52:20 +0000 (15:52 -0400)]
core: when logging about dependency cycles, add UNIT= entries for all involved units
Example log:
Jul 22 15:55:21 fedora systemd[1]: a1.service: Found ordering cycle on a2.service/start
Jul 22 15:55:21 fedora systemd[1]: a1.service: Found dependency on a3.service/start
Jul 22 15:55:21 fedora systemd[1]: a1.service: Found dependency on a1.service/start
Jul 22 15:55:21 fedora systemd[1]: a1.service: Job a2.service/start deleted to break ordering cycle starting with a1.service/start
Jul 22 15:55:21 fedora systemd[1]: Starting a1.service...
Jul 22 15:55:21 fedora systemd[1]: Started a1.service.
Example log entry:
Sat 2017-07-22 15:55:21.372389 EDT [s=
0004bb6302d94ac3aa69987fb6157338;i=9ae;b=
a96eb6153d4f4f3686c7b4
_BOOT_ID=
a96eb6153d4f4f3686c7b4db8a432908
_MACHINE_ID=
ad18f69b80264b52bb3b766240742383
_HOSTNAME=fedora
PRIORITY=3
SYSLOG_FACILITY=3
SYSLOG_IDENTIFIER=systemd
_UID=0
_GID=0
_PID=1
_TRANSPORT=journal
_CAP_EFFECTIVE=
3fffffffff
_COMM=systemd
_EXE=/usr/lib/systemd/systemd
_SYSTEMD_CGROUP=/init.scope
_SYSTEMD_UNIT=init.scope
_SYSTEMD_SLICE=-.slice
_SELINUX_CONTEXT=system_u:system_r:kernel_t:s0
CODE_FILE=../src/core/transaction.c
CODE_FUNC=transaction_verify_order_one
UNIT=a3.service
UNIT=a1.service
UNIT=a2.service
CODE_LINE=430
MESSAGE=a1.service: Job a2.service/start deleted to break ordering cycle starting with a1.service
_CMDLINE=/usr/lib/systemd/systemd --system --deserialize 28
_SOURCE_REALTIME_TIMESTAMP=
1500753321372389
This should make it easier to see when any of the units are involved in an
ordering cycle.
Fixes #6336.
v2:
- also update the "Unable to break cycle" message.
Zbigniew Jędrzejewski-Szmek [Sat, 22 Jul 2017 12:54:27 +0000 (08:54 -0400)]
shared/dropin: improve error message
We're not just sorting, but actually creating the list. We can
also use the output parameter directly, without a temporary variable.
Zbigniew Jędrzejewski-Szmek [Sat, 22 Jul 2017 12:39:49 +0000 (08:39 -0400)]
Revert "core: don't load dropin data multiple times for the same unit (#5139)"
This reverts commit
2d058a87ffb2d31a50422a8aebd119bbb4427244.
When we add another name to a unit (by following an alias), we need to
reload all drop-ins. This is necessary to load any additional dropins
found in the dirs created from the alias name.
Fixes #6334.
Lion Yang [Fri, 21 Jul 2017 20:21:30 +0000 (15:21 -0500)]
man/systemd.network: DHCP defaults to "no" (#6423)
Code at: /src/network/networkd-network.c#L160
Lion Yang [Fri, 21 Jul 2017 20:20:49 +0000 (15:20 -0500)]
doc/systemd-resolved.service: fix typo (#6422)
DNS sever => DNS server
Zbigniew Jędrzejewski-Szmek [Fri, 21 Jul 2017 11:51:07 +0000 (07:51 -0400)]
resolved: make sure idn2 conversions are roundtrippable
While working on the gateway→_gateway conversion, I noticed that
libidn2 strips the leading underscore in some names.
https://gitlab.com/libidn/libidn2/issues/30 was resolved in
https://gitlab.com/libidn/libidn2/commit/
05d753ea69e2308cd02436d0511f4b844071dc79,
which disabled "STD3 ASCII rules" by default, i.e. disabled stripping
of underscores. So the situation is that with previously released libidn2
versions we would get incorrect behaviour, and once new libidn2 is released,
we should be OK.
Let's implement a simple test which checks that the name survives the
roundtrip, and if it doesn't, skip IDN resolution. Under old libidn2 this will
fail in more cases, and under new libidn2 in fewer, but should be the right
thing to do also under new libidn2.
Yu Watanabe [Fri, 21 Jul 2017 08:36:39 +0000 (17:36 +0900)]
core: fix typo (#6417)
Lennart Poettering [Fri, 21 Jul 2017 08:35:45 +0000 (10:35 +0200)]
tree-wide: fput[cs]() → fput[cs]_unlocked() wherever that makes sense (#6396)
As a follow-up for
db3f45e2d2586d78f942a43e661415bc50716d11 let's do the
same for all other cases where we create a FILE* with local scope and
know that no other threads hence can have access to it.
For most cases this shouldn't change much really, but this should speed
dbus introspection and calender time formatting up a bit.
Zbigniew Jędrzejewski-Szmek [Thu, 20 Jul 2017 19:14:13 +0000 (15:14 -0400)]
Merge pull request #6413 from poettering/getpid
speed up getpid() again