drm/amd/display: fix some coding style issues

commit ae67558be712237109100fd14f12378adcf24356 upstream.

Fix the following checkpatch checks in amdgpu_dm.c

CHECK: Prefer kernel type 'u8' over 'uint8_t'
CHECK: Prefer kernel type 'u32' over 'uint32_t'
CHECK: Prefer kernel type 'u64' over 'uint64_t'
CHECK: Prefer kernel type 's32' over 'int32_t'

Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ PSR-SU support was introduced in kernel 6.2 with commits like
  30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
  but PSR-SU isn't enabled in 6.1.y, so this block needs to be skipped
  when backporting. ]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: use max_dsc_bpp in amdgpu_dm

commit 6e5abe94c6eb9b281398e39819217e8fdd1c336f upstream.

Since, the quirk is handled in the DRM core now, we can use that value
instead of the internal value.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: Fix sk_assign on s390x

[ Upstream commit 7ce878ca81bca7811e669db4c394b86780e0dbe4 ]

sk_assign is failing on an s390x machine running Debian "bookworm" for
2 reasons: legacy server_map definition and uninitialized addrlen in
recvfrom() call.

Fix by adding a new-style server_map definition and dropping addrlen
(recvfrom() allows NULL values for src_addr and addrlen).

Since the test should support tc built without libbpf, build the prog
twice: with the old-style definition and with the new-style definition,
then select the right one at runtime. This could be done at compile
time too, but this would not be cross-compilation friendly.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230129190501.1624747-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: Workaround verification failure for fexit_bpf2bpf/func_replace_return_code

[ Upstream commit 63d78b7e8ca2d0eb8c687a355fa19d01b6fcc723 ]

With latest llvm17, selftest fexit_bpf2bpf/func_replace_return_code
has the following verification failure:

  0: R1=ctx(off=0,imm=0) R10=fp0
  ; int connect_v4_prog(struct bpf_sock_addr *ctx)
  0: (bf) r7 = r1                       ; R1=ctx(off=0,imm=0) R7_w=ctx(off=0,imm=0)
  1: (b4) w6 = 0                        ; R6_w=0
  ; memset(&tuple.ipv4.saddr, 0, sizeof(tuple.ipv4.saddr));
  ...
  ; return do_bind(ctx) ? 1 : 0;
  179: (bf) r1 = r7                     ; R1=ctx(off=0,imm=0) R7=ctx(off=0,imm=0)
  180: (85) call pc+147
  Func#3 is global and valid. Skipping.
  181: R0_w=scalar()
  181: (bc) w6 = w0                     ; R0_w=scalar() R6_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
  182: (05) goto pc-129
  ; }
  54: (bc) w0 = w6                      ; R0_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R6_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
  55: (95) exit
  At program exit the register R0 has value (0x0; 0xffffffff) should have been in (0x0; 0x1)
  processed 281 insns (limit 1000000) max_states_per_insn 1 total_states 26 peak_states 26 mark_read 13
  -- END PROG LOAD LOG --
  libbpf: prog 'connect_v4_prog': failed to load: -22

The corresponding source code:

  __attribute__ ((noinline))
  int do_bind(struct bpf_sock_addr *ctx)
  {
        struct sockaddr_in sa = {};

        sa.sin_family = AF_INET;
        sa.sin_port = bpf_htons(0);
        sa.sin_addr.s_addr = bpf_htonl(SRC_REWRITE_IP4);

        if (bpf_bind(ctx, (struct sockaddr *)&sa, sizeof(sa)) != 0)
                return 0;

        return 1;
  }
  ...
  SEC("cgroup/connect4")
  int connect_v4_prog(struct bpf_sock_addr *ctx)
  {
  ...
        return do_bind(ctx) ? 1 : 0;
  }

Insn 180 is a call to 'do_bind'. The call's return value is also the return value
for the program. Since do_bind() returns 0/1, so it is legitimate for compiler to
optimize 'return do_bind(ctx) ? 1 : 0' to 'return do_bind(ctx)'. However, such
optimization breaks verifier as the return value of 'do_bind()' is marked as any
scalar which violates the requirement of prog return value 0/1.

There are two ways to fix this problem, (1) changing 'return 1' in do_bind() to
e.g. 'return 10' so the compiler has to do 'do_bind(ctx) ? 1 :0', or (2)
suggested by Andrii, marking do_bind() with __weak attribute so the compiler
cannot make any assumption on do_bind() return value.

This patch adopted adding __weak approach which is simpler and more resistant
to potential compiler optimizations.

Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230310012410.2920570-1-yhs@fb.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: make test_align selftest more robust

[ Upstream commit 4f999b767769b76378c3616c624afd6f4bb0d99f ]

test_align selftest relies on BPF verifier log emitting register states
for specific instructions in expected format. Unfortunately, BPF
verifier precision backtracking log interferes with such expectations.
And instruction on which precision propagation happens sometimes don't
output full expected register states. This does indeed look like
something to be improved in BPF verifier, but is beyond the scope of
this patch set.

So to make test_align a bit more robust, inject few dummy R4 = R5
instructions which capture desired state of R5 and won't have precision
tracking logs on them. This fixes tests until we can improve BPF
verifier output in the presence of precision tracking.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: aggressively forget precise markings during state checkpointing

[ Upstream commit 7a830b53c17bbadcf99f778f28aaaa4e6c41df5f ]

Exploit the property of about-to-be-checkpointed state to be able to
forget all precise markings up to that point even more aggressively. We
now clear all potentially inherited precise markings right before
checkpointing and branching off into child state. If any of children
states require precise knowledge of any SCALAR register, those will be
propagated backwards later on before this state is finalized, preserving
correctness.

There is a single selftests BPF program change, but tremendous one: 25x
reduction in number of verified instructions and states in
trace_virtqueue_add_sgs.

Cilium results are more modest, but happen across wider range of programs.

SELFTESTS RESULTS
=================

$ ./veristat -C -e file,prog,insns,states ~/imprecise-early-results.csv ~/imprecise-aggressive-results.csv | grep -v '+0'
File                 Program                  Total insns (A)  Total insns (B)  Total insns (DIFF)  Total states (A)  Total states (B)  Total states (DIFF)
-------------------  -----------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------
loop6.bpf.linked1.o  trace_virtqueue_add_sgs           398057            15114   -382943 (-96.20%)              8717               336      -8381 (-96.15%)
-------------------  -----------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------

CILIUM RESULTS
==============

$ ./veristat -C -e file,prog,insns,states ~/imprecise-early-results-cilium.csv ~/imprecise-aggressive-results-cilium.csv | grep -v '+0'
File           Program                           Total insns (A)  Total insns (B)  Total insns (DIFF)  Total states (A)  Total states (B)  Total states (DIFF)
-------------  --------------------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------
bpf_host.o     tail_handle_nat_fwd_ipv4                    23426            23221       -205 (-0.88%)              1537              1515         -22 (-1.43%)
bpf_host.o     tail_handle_nat_fwd_ipv6                    13009            12904       -105 (-0.81%)               719               708         -11 (-1.53%)
bpf_host.o     tail_nodeport_nat_ingress_ipv6               5261             5196        -65 (-1.24%)               247               243          -4 (-1.62%)
bpf_host.o     tail_nodeport_nat_ipv6_egress                3446             3406        -40 (-1.16%)               203               198          -5 (-2.46%)
bpf_lxc.o      tail_handle_nat_fwd_ipv4                    23426            23221       -205 (-0.88%)              1537              1515         -22 (-1.43%)
bpf_lxc.o      tail_handle_nat_fwd_ipv6                    13009            12904       -105 (-0.81%)               719               708         -11 (-1.53%)
bpf_lxc.o      tail_ipv4_ct_egress                          5074             4897       -177 (-3.49%)               255               248          -7 (-2.75%)
bpf_lxc.o      tail_ipv4_ct_ingress                         5100             4923       -177 (-3.47%)               255               248          -7 (-2.75%)
bpf_lxc.o      tail_ipv4_ct_ingress_policy_only             5100             4923       -177 (-3.47%)               255               248          -7 (-2.75%)
bpf_lxc.o      tail_ipv6_ct_egress                          4558             4536        -22 (-0.48%)               188               187          -1 (-0.53%)
bpf_lxc.o      tail_ipv6_ct_ingress                         4578             4556        -22 (-0.48%)               188               187          -1 (-0.53%)
bpf_lxc.o      tail_ipv6_ct_ingress_policy_only             4578             4556        -22 (-0.48%)               188               187          -1 (-0.53%)
bpf_lxc.o      tail_nodeport_nat_ingress_ipv6               5261             5196        -65 (-1.24%)               247               243          -4 (-1.62%)
bpf_overlay.o  tail_nodeport_nat_ingress_ipv6               5261             5196        -65 (-1.24%)               247               243          -4 (-1.62%)
bpf_overlay.o  tail_nodeport_nat_ipv6_egress                3482             3442        -40 (-1.15%)               204               201          -3 (-1.47%)
bpf_xdp.o      tail_nodeport_nat_egress_ipv4               17200            15619      -1581 (-9.19%)              1111              1010        -101 (-9.09%)
-------------  --------------------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: stop setting precise in current state

[ Upstream commit f63181b6ae79fd3b034cde641db774268c2c3acf ]

Setting reg->precise to true in current state is not necessary from
correctness standpoint, but it does pessimise the whole precision (or
rather "imprecision", because that's what we want to keep as much as
possible) tracking. Why is somewhat subtle and my best attempt to
explain this is recorded in an extensive comment for __mark_chain_precise()
function. Some more careful thinking and code reading is probably required
still to grok this completely, unfortunately. Whiteboarding and a bunch
of extra handwaiving in person would be even more helpful, but is deemed
impractical in Git commit.

Next patch pushes this imprecision property even further, building on top of
the insights described in this patch.

End results are pretty nice, we get reduction in number of total instructions
and states verified due to a better states reuse, as some of the states are now
more generic and permissive due to less unnecessary precise=true requirements.

SELFTESTS RESULTS
=================

$ ./veristat -C -e file,prog,insns,states ~/subprog-precise-results.csv ~/imprecise-early-results.csv | grep -v '+0'
File                                     Program                 Total insns (A)  Total insns (B)  Total insns (DIFF)  Total states (A)  Total states (B)  Total states (DIFF)
---------------------------------------  ----------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------
bpf_iter_ksym.bpf.linked1.o              dump_ksym                           347              285       -62 (-17.87%)                20                19          -1 (-5.00%)
pyperf600_bpf_loop.bpf.linked1.o         on_event                           3678             3736        +58 (+1.58%)               276               285          +9 (+3.26%)
setget_sockopt.bpf.linked1.o             skops_sockopt                      4038             3947        -91 (-2.25%)               347               343          -4 (-1.15%)
test_l4lb.bpf.linked1.o                  balancer_ingress                   4559             2611     -1948 (-42.73%)               118               105        -13 (-11.02%)
test_l4lb_noinline.bpf.linked1.o         balancer_ingress                   6279             6268        -11 (-0.18%)               237               236          -1 (-0.42%)
test_misc_tcp_hdr_options.bpf.linked1.o  misc_estab                         1307             1303         -4 (-0.31%)               100                99          -1 (-1.00%)
test_sk_lookup.bpf.linked1.o             ctx_narrow_access                   456              447         -9 (-1.97%)                39                38          -1 (-2.56%)
test_sysctl_loop1.bpf.linked1.o          sysctl_tcp_mem                     1389             1384         -5 (-0.36%)                26                25          -1 (-3.85%)
test_tc_dtime.bpf.linked1.o              egress_fwdns_prio101                518              485        -33 (-6.37%)                51                46          -5 (-9.80%)
test_tc_dtime.bpf.linked1.o              egress_host                         519              468        -51 (-9.83%)                50                44         -6 (-12.00%)
test_tc_dtime.bpf.linked1.o              ingress_fwdns_prio101               842             1000      +158 (+18.76%)                73                88        +15 (+20.55%)
xdp_synproxy_kern.bpf.linked1.o          syncookie_tc                     405757           373173     -32584 (-8.03%)             25735             22882      -2853 (-11.09%)
xdp_synproxy_kern.bpf.linked1.o          syncookie_xdp                    479055           371590   -107465 (-22.43%)             29145             22207      -6938 (-23.81%)
---------------------------------------  ----------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------

Slight regression in test_tc_dtime.bpf.linked1.o/ingress_fwdns_prio101
is left for a follow up, there might be some more precision-related bugs
in existing BPF verifier logic.

CILIUM RESULTS
==============

$ ./veristat -C -e file,prog,insns,states ~/subprog-precise-results-cilium.csv ~/imprecise-early-results-cilium.csv | grep -v '+0'
File           Program                         Total insns (A)  Total insns (B)  Total insns (DIFF)  Total states (A)  Total states (B)  Total states (DIFF)
-------------  ------------------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------
bpf_host.o     cil_from_host                               762              556      -206 (-27.03%)                43                37         -6 (-13.95%)
bpf_host.o     tail_handle_nat_fwd_ipv4                  23541            23426       -115 (-0.49%)              1538              1537          -1 (-0.07%)
bpf_host.o     tail_nodeport_nat_egress_ipv4             33592            33566        -26 (-0.08%)              2163              2161          -2 (-0.09%)
bpf_lxc.o      tail_handle_nat_fwd_ipv4                  23541            23426       -115 (-0.49%)              1538              1537          -1 (-0.07%)
bpf_overlay.o  tail_nodeport_nat_egress_ipv4             33581            33543        -38 (-0.11%)              2160              2157          -3 (-0.14%)
bpf_xdp.o      tail_handle_nat_fwd_ipv4                  21659            20920       -739 (-3.41%)              1440              1376         -64 (-4.44%)
bpf_xdp.o      tail_handle_nat_fwd_ipv6                  17084            17039        -45 (-0.26%)               907               905          -2 (-0.22%)
bpf_xdp.o      tail_lb_ipv4                              73442            73430        -12 (-0.02%)              4370              4369          -1 (-0.02%)
bpf_xdp.o      tail_lb_ipv6                             152114           151895       -219 (-0.14%)              6493              6479         -14 (-0.22%)
bpf_xdp.o      tail_nodeport_nat_egress_ipv4             17377            17200       -177 (-1.02%)              1125              1111         -14 (-1.24%)
bpf_xdp.o      tail_nodeport_nat_ingress_ipv6             6405             6397         -8 (-0.12%)               309               308          -1 (-0.32%)
bpf_xdp.o      tail_rev_nodeport_lb4                      7126             6934       -192 (-2.69%)               414               402         -12 (-2.90%)
bpf_xdp.o      tail_rev_nodeport_lb6                     18059            17905       -154 (-0.85%)              1105              1096          -9 (-0.81%)
-------------  ------------------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: allow precision tracking for programs with subprogs

[ Upstream commit be2ef8161572ec1973124ebc50f56dafc2925e07 ]

Stop forcing precise=true for SCALAR registers when BPF program has any
subprograms. Current restriction means that any BPF program, as soon as
it uses subprograms, will end up not getting any of the precision
tracking benefits in reduction of number of verified states.

This patch keeps the fallback mark_all_scalars_precise() behavior if
precise marking has to cross function frames. E.g., if subprogram
requires R1 (first input arg) to be marked precise, ideally we'd need to
backtrack to the parent function and keep marking R1 and its
dependencies as precise. But right now we give up and force all the
SCALARs in any of the current and parent states to be forced to
precise=true. We can lift that restriction in the future.

But this patch fixes two issues identified when trying to enable
precision tracking for subprogs.

First, prevent "escaping" from top-most state in a global subprog. While
with entry-level BPF program we never end up requesting precision for
R1-R5 registers, because R2-R5 are not initialized (and so not readable
in correct BPF program), and R1 is PTR_TO_CTX, not SCALAR, and so is
implicitly precise. With global subprogs, though, it's different, as
global subprog a) can have up to 5 SCALAR input arguments, which might
get marked as precise=true and b) it is validated in isolation from its
main entry BPF program. b) means that we can end up exhausting parent
state chain and still not mark all registers in reg_mask as precise,
which would lead to verifier bug warning.

To handle that, we need to consider two cases. First, if the very first
state is not immediately "checkpointed" (i.e., stored in state lookup
hashtable), it will get correct first_insn_idx and last_insn_idx
instruction set during state checkpointing. As such, this case is
already handled and __mark_chain_precision() already handles that by
just doing nothing when we reach to the very first parent state.
st->parent will be NULL and we'll just stop. Perhaps some extra check
for reg_mask and stack_mask is due here, but this patch doesn't address
that issue.

More problematic second case is when global function's initial state is
immediately checkpointed before we manage to process the very first
instruction. This is happening because when there is a call to global
subprog from the main program the very first subprog's instruction is
marked as pruning point, so before we manage to process first
instruction we have to check and checkpoint state. This patch adds
a special handling for such "empty" state, which is identified by having
st->last_insn_idx set to -1. In such case, we check that we are indeed
validating global subprog, and with some sanity checking we mark input
args as precise if requested.

Note that we also initialize state->first_insn_idx with correct start
insn_idx offset. For main program zero is correct value, but for any
subprog it's quite confusing to not have first_insn_idx set. This
doesn't have any functional impact, but helps with debugging and state
printing. We also explicitly initialize state->last_insns_idx instead of
relying on is_state_visited() to do this with env->prev_insns_idx, which
will be -1 on the very first instruction. This concludes necessary
changes to handle specifically global subprog's precision tracking.

Second identified problem was missed handling of BPF helper functions
that call into subprogs (e.g., bpf_loop and few others). From precision
tracking and backtracking logic's standpoint those are effectively calls
into subprogs and should be called as BPF_PSEUDO_CALL calls.

This patch takes the least intrusive way and just checks against a short
list of current BPF helpers that do call subprogs, encapsulated in
is_callback_calling_function() function. But to prevent accidentally
forgetting to add new BPF helpers to this "list", we also do a sanity
check in __check_func_call, which has to be called for each such special
BPF helper, to validate that BPF helper is indeed recognized as
callback-calling one. This should catch any missed checks in the future.
Adding some special flags to be added in function proto definitions
seemed like an overkill in this case.

With the above changes, it's possible to remove forceful setting of
reg->precise to true in __mark_reg_unknown, which turns on precision
tracking both inside subprogs and entry progs that have subprogs. No
warnings or errors were detected across all the selftests, but also when
validating with veristat against internal Meta BPF objects and Cilium
objects. Further, in some BPF programs there are noticeable reduction in
number of states and instructions validated due to more effective
precision tracking, especially benefiting syncookie test.

$ ./veristat -C -e file,prog,insns,states ~/baseline-results.csv ~/subprog-precise-results.csv  | grep -v '+0'
File                                      Program                     Total insns (A)  Total insns (B)  Total insns (DIFF)  Total states (A)  Total states (B)  Total states (DIFF)
----------------------------------------  --------------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------
pyperf600_bpf_loop.bpf.linked1.o          on_event                               3966             3678       -288 (-7.26%)               306               276         -30 (-9.80%)
pyperf_global.bpf.linked1.o               on_event                               7563             7530        -33 (-0.44%)               520               517          -3 (-0.58%)
pyperf_subprogs.bpf.linked1.o             on_event                              36358            36934       +576 (+1.58%)              2499              2531         +32 (+1.28%)
setget_sockopt.bpf.linked1.o              skops_sockopt                          3965             4038        +73 (+1.84%)               343               347          +4 (+1.17%)
test_cls_redirect_subprogs.bpf.linked1.o  cls_redirect                          64965            64901        -64 (-0.10%)              4619              4612          -7 (-0.15%)
test_misc_tcp_hdr_options.bpf.linked1.o   misc_estab                             1491             1307      -184 (-12.34%)               110               100         -10 (-9.09%)
test_pkt_access.bpf.linked1.o             test_pkt_access                         354              349         -5 (-1.41%)                25                24          -1 (-4.00%)
test_sock_fields.bpf.linked1.o            egress_read_sock_fields                 435              375       -60 (-13.79%)                22                20          -2 (-9.09%)
test_sysctl_loop2.bpf.linked1.o           sysctl_tcp_mem                         1508             1501         -7 (-0.46%)                29                28          -1 (-3.45%)
test_tc_dtime.bpf.linked1.o               egress_fwdns_prio100                    468              435        -33 (-7.05%)                45                41          -4 (-8.89%)
test_tc_dtime.bpf.linked1.o               ingress_fwdns_prio100                   398              408        +10 (+2.51%)                42                39          -3 (-7.14%)
test_tc_dtime.bpf.linked1.o               ingress_fwdns_prio101                  1096              842      -254 (-23.18%)                97                73        -24 (-24.74%)
test_tcp_hdr_options.bpf.linked1.o        estab                                  2758             2408      -350 (-12.69%)               208               181        -27 (-12.98%)
test_urandom_usdt.bpf.linked1.o           urand_read_with_sema                    466              448        -18 (-3.86%)                31                28          -3 (-9.68%)
test_urandom_usdt.bpf.linked1.o           urand_read_without_sema                 466              448        -18 (-3.86%)                31                28          -3 (-9.68%)
test_urandom_usdt.bpf.linked1.o           urandlib_read_with_sema                 466              448        -18 (-3.86%)                31                28          -3 (-9.68%)
test_urandom_usdt.bpf.linked1.o           urandlib_read_without_sema              466              448        -18 (-3.86%)                31                28          -3 (-9.68%)
test_xdp_noinline.bpf.linked1.o           balancer_ingress_v6                    4302             4294         -8 (-0.19%)               257               256          -1 (-0.39%)
xdp_synproxy_kern.bpf.linked1.o           syncookie_tc                         583722           405757   -177965 (-30.49%)             35846             25735     -10111 (-28.21%)
xdp_synproxy_kern.bpf.linked1.o           syncookie_xdp                        609123           479055   -130068 (-21.35%)             35452             29145      -6307 (-17.79%)
----------------------------------------  --------------------------  ---------------  ---------------  ------------------  ----------------  ----------------  -------------------

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/kallsyms: update the usage in the comment block

commit 79549da691edd4874c19d99c578a134471817c47 upstream.

Commit 010a0aad39fc ("kallsyms: Correctly sequence symbols when
CONFIG_LTO_CLANG=y") added --lto-clang, and updated the usage()
function, but not the comment. Update it in the same way.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/kallsyms.c Make the comment up-to-date with current implementation

commit adc40221bf676f3e722d135889a7b913b4162dc2 upstream.

The comment in scripts/kallsyms.c describing the usage of
scripts/kallsyms does not reflect the latest implementation.
Fix the comment to be equivalent to what the usage() function prints.

Signed-off-by: Yuma Ueda <cyan@0x00a1e9.dev>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20221118133631.4554-1-cyan@0x00a1e9.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kallsyms: add kallsyms_seqs_of_names to list of special symbols

commit ced0f245ed951e2b8bd68f79c15238d7dd253662 upstream.

My randconfig build setup ran into another kallsyms warning:

Inconsistent kallsyms data
Try make KALLSYMS_EXTRA_PASS=1 as a workaround

After adding some debugging code to kallsyms.c, I saw that the recently
added kallsyms_seqs_of_names symbol can sometimes cause the second stage
table to be slightly longer than the first stage, which makes the
build inconsistent.

Add it to the exception table that contains all other kallsyms-generated
symbols.

Fixes: 60443c88f3a8 ("kallsyms: Improve the performance of kallsyms_lookup_name()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: dw: Remove misleading comment for Mount Evans SoC

commit 5b6d0b91f84cff3f28724076f93f6f9e2ef8d775 upstream.

Remove a misleading comment about the DMA operations of the Intel Mount
Evans SoC's SPI Controller as requested by Serge.

Signed-off-by: Abe Kohandel <abe.kohandel@intel.com>
Link: https://lore.kernel.org/linux-spi/20230606191333.247ucbf7h3tlooxf@mobilestation/
Fixes: 0760d5d0e9f0 ("spi: dw: Add compatible for Intel Mount Evans SoC")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20230606231844.726272-1-abe.kohandel@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: fix bulk_move corruption when adding a entry

commit 4481913607e58196c48a4fef5e6f45350684ec3c upstream.

When the resource is the first in the bulk_move range, adding it again
(thus moving it to the tail) will corrupt the list since the first
pointer is not moved. This eventually lead to null pointer deref in
ttm_lru_bulk_move_del()

Fixes: fee2ede15542 ("drm/ttm: rework bulk move handling v5")
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20230622141902.28718-3-Yunxiang.Li@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/histograms: Return an error if we fail to add histogram to hist_vars list

commit 4b8b3905165ef98386a3c06f196c85d21292d029 upstream.

Commit 6018b585e8c6 ("tracing/histograms: Add histograms to hist_vars if
they have referenced variables") added a check to fail histogram creation
if save_hist_vars() failed to add histogram to hist_vars list. But the
commit failed to set ret to failed return code before jumping to
unregister histogram, fix it.

Link: https://lore.kernel.org/linux-trace-kernel/20230714203341.51396-1-mkhalfella@purestorage.com
Cc: stable@vger.kernel.org
Fixes: 6018b585e8c6 ("tracing/histograms: Add histograms to hist_vars if they have referenced variables")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: recheck chechpointing non-dirty buffer

commit c2d6fd9d6f35079f1669f0100f05b46708c74b7f upstream.

There is a long-standing metadata corruption issue that happens from
time to time, but it's very difficult to reproduce and analyse, benefit
from the JBD2_CYCLE_RECORD option, we found out that the problem is the
checkpointing process miss to write out some buffers which are raced by
another do_get_write_access(). Looks below for detail.

jbd2_log_do_checkpoint() //transaction X
 //buffer A is dirty and not belones to any transaction
 __buffer_relink_io() //move it to the IO list
 __flush_batch()
  write_dirty_buffer()
                             do_get_write_access()
                             clear_buffer_dirty
                             __jbd2_journal_file_buffer()
                             //add buffer A to a new transaction Y
   lock_buffer(bh)
   //doesn't write out
 __jbd2_journal_remove_checkpoint()
 //finish checkpoint except buffer A
 //filesystem corrupt if the new transaction Y isn't fully write out.

Due to the t_checkpoint_list walking loop in jbd2_log_do_checkpoint()
have already handles waiting for buffers under IO and re-added new
transaction to complete commit, and it also removing cleaned buffers,
this makes sure the list will eventually get empty. So it's fine to
leave buffers on the t_checkpoint_list while flushing out and completely
stop using the t_checkpoint_io_list.

Cc: stable@vger.kernel.org
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Tested-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: prevent stale pointer dereference in phy_init()

[ Upstream commit 1c613beaf877c0c0d755853dc62687e2013e55c4 ]

mdio_bus_init() and phy_driver_register() both have error paths, and if
those are ever hit, ethtool will have a stale pointer to the
phy_ethtool_phy_ops stub structure, which references memory from a
module that failed to load (phylib).

It is probably hard to force an error in this code path even manually,
but the error teardown path of phy_init() should be the same as
phy_exit(), which is now simply not the case.

Fixes: 55d8f053ce1b ("net: phy: Register ethtool PHY operations")
Link: https://lore.kernel.org/netdev/ZLaiJ4G6TaJYGJyU@shell.armlinux.org.uk/
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230720000231.1939689-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around fastopenq.max_qlen

[ Upstream commit 70f360dd7042cb843635ece9d28335a4addff9eb ]

This field can be read locklessly.

Fixes: 1536e2857bd3 ("tcp: Add a TCP_FASTOPEN socket option to get a max backlog on its listner")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-12-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around icsk->icsk_user_timeout

[ Upstream commit 26023e91e12c68669db416b97234328a03d8e499 ]

This field can be read locklessly from do_tcp_getsockopt()

Fixes: dca43c75e7e5 ("tcp: Add TCP_USER_TIMEOUT socket option.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around tp->notsent_lowat

[ Upstream commit 1aeb87bc1440c5447a7fa2d6e3c2cca52cbd206b ]

tp->notsent_lowat can be read locklessly from do_tcp_getsockopt()
and tcp_poll().

Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around rskq_defer_accept

[ Upstream commit ae488c74422fb1dcd807c0201804b3b5e8a322a3 ]

do_tcp_getsockopt() reads rskq_defer_accept while another cpu
might change its value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around tp->linger2

[ Upstream commit 9df5335ca974e688389c875546e5819778a80d59 ]

do_tcp_getsockopt() reads tp->linger2 while another cpu
might change its value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around icsk->icsk_syn_retries

[ Upstream commit 3a037f0f3c4bfe44518f2fbb478aa2f99a9cd8bb ]

do_tcp_getsockopt() and reqsk_timer_handler() read
icsk->icsk_syn_retries while another cpu might change its value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around tp->keepalive_probes

[ Upstream commit 6e5e1de616bf5f3df1769abc9292191dfad9110a ]

do_tcp_getsockopt() reads tp->keepalive_probes while another cpu
might change its value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around tp->keepalive_intvl

[ Upstream commit 5ecf9d4f52ff2f1d4d44c9b68bc75688e82f13b4 ]

do_tcp_getsockopt() reads tp->keepalive_intvl while another cpu
might change its value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around tp->keepalive_time

[ Upstream commit 4164245c76ff906c9086758e1c3f87082a7f5ef5 ]

do_tcp_getsockopt() reads tp->keepalive_time while another cpu
might change its value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around tp->tsoffset

[ Upstream commit dd23c9f1e8d5c1d2e3d29393412385ccb9c7a948 ]

do_tcp_getsockopt() reads tp->tsoffset while another cpu
might change its value.

Fixes: 93be6ce0e91b ("tcp: set and get per-socket timestamp")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around tp->tcp_tx_delay

[ Upstream commit 348b81b68b13ebd489a3e6a46aa1c384c731c919 ]

do_tcp_getsockopt() reads tp->tcp_tx_delay while another cpu
might change its value.

Fixes: a842fe1425cb ("tcp: add optional per socket transmit delay")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()

[ Upstream commit de6dfcefd107667ce2dbedf4d9337f5ed557a4a1 ]

KASAN reports that there's a use-after-free in
hci_remove_adv_monitor(). Trawling through the disassembly, you can
see that the complaint is from the access in bt_dev_dbg() under the
HCI_ADV_MONITOR_EXT_MSFT case. The problem case happens because
msft_remove_monitor() can end up freeing the monitor
structure. Specifically:
  hci_remove_adv_monitor() ->
  msft_remove_monitor() ->
  msft_remove_monitor_sync() ->
  msft_le_cancel_monitor_advertisement_cb() ->
  hci_free_adv_monitor()

Let's fix the problem by just stashing the relevant data when it's
still valid.

Fixes: 7cf5c2978f23 ("Bluetooth: hci_sync: Refactor remove Adv Monitor")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: ISO: fix iso_conn related locking and validity issues

[ Upstream commit d40ae85ee62e3666f45bc61864b22121346f88ef ]

sk->sk_state indicates whether iso_pi(sk)->conn is valid. Operations
that check/update sk_state and access conn should hold lock_sock,
otherwise they can race.

The order of taking locks is hci_dev_lock > lock_sock > iso_conn_lock,
which is how it is in connect/disconnect_cfm -> iso_conn_del ->
iso_chan_del.

Fix locking in iso_connect_cis/bis and sendmsg/recvmsg to take lock_sock
around updating sk_state and conn.

iso_conn_del must not occur during iso_connect_cis/bis, as it frees the
iso_conn. Hold hdev->lock longer to prevent that.

This should not reintroduce the issue fixed in commit 241f51931c35
("Bluetooth: ISO: Avoid circular locking dependency"), since the we
acquire locks in order. We retain the fix in iso_sock_connect to release
lock_sock before iso_connect_* acquires hdev->lock.

Similarly for commit 6a5ad251b7cd ("Bluetooth: ISO: Fix possible
circular locking dependency"). We retain the fix in iso_conn_ready to
not acquire iso_conn_lock before lock_sock.

iso_conn_add shall return iso_conn with valid hcon. Make it so also when
reusing an old CIS connection waiting for disconnect timeout (see
__iso_sock_close where conn->hcon is set to NULL).

Trace with iso_conn_del after iso_chan_add in iso_connect_cis:
===============================================================
iso_sock_create:771: sock 00000000be9b69b7
iso_sock_init:693: sk 000000004dff667e
iso_sock_bind:827: sk 000000004dff667e 70:1a:b8:98:ff:a2 type 1
iso_sock_setsockopt:1289: sk 000000004dff667e
iso_sock_setsockopt:1289: sk 000000004dff667e
iso_sock_setsockopt:1289: sk 000000004dff667e
iso_sock_connect:875: sk 000000004dff667e
iso_connect_cis:353: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
hci_conn_add:1005: hci0 dst 28:3d:c2:4a:7e:da
iso_conn_add:140: hcon 000000007b65d182 conn 00000000daf8625e
__iso_chan_add:214: conn 00000000daf8625e
iso_connect_cfm:1700: hcon 000000007b65d182 bdaddr 28:3d:c2:4a:7e:da status 12
iso_conn_del:187: hcon 000000007b65d182 conn 00000000daf8625e, err 16
iso_sock_clear_timer:117: sock 000000004dff667e state 3
    <Note: sk_state is BT_BOUND (3), so iso_connect_cis is still
    running at this point>
iso_chan_del:153: sk 000000004dff667e, conn 00000000daf8625e, err 16
hci_conn_del:1151: hci0 hcon 000000007b65d182 handle 65535
hci_conn_unlink:1102: hci0: hcon 000000007b65d182
hci_chan_list_flush:2780: hcon 000000007b65d182
iso_sock_getsockopt:1376: sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_getsockopt:1376: sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_shutdown:1434: sock 00000000be9b69b7, sk 000000004dff667e, how 1
__iso_sock_close:632: sk 000000004dff667e state 5 socket 00000000be9b69b7
     <Note: sk_state is BT_CONNECT (5), even though iso_chan_del sets
     BT_CLOSED (6). Only iso_connect_cis sets it to BT_CONNECT, so it
     must be that iso_chan_del occurred between iso_chan_add and end of
     iso_connect_cis.>
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 8000000006467067 P4D 8000000006467067 PUD 3f5f067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:__iso_sock_close (net/bluetooth/iso.c:664) bluetooth
===============================================================

Trace with iso_conn_del before iso_chan_add in iso_connect_cis:
===============================================================
iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
...
iso_conn_add:140: hcon 0000000093bc551f conn 00000000768ae504
hci_dev_put:1487: hci0 orig refcnt 21
hci_event_packet:7607: hci0: event 0x0e
hci_cmd_complete_evt:4231: hci0: opcode 0x2062
hci_cc_le_set_cig_params:3846: hci0: status 0x07
hci_sent_cmd_data:3107: hci0 opcode 0x2062
iso_connect_cfm:1703: hcon 0000000093bc551f bdaddr 28:3d:c2:4a:7e:da status 7
iso_conn_del:187: hcon 0000000093bc551f conn 00000000768ae504, err 12
hci_conn_del:1151: hci0 hcon 0000000093bc551f handle 65535
hci_conn_unlink:1102: hci0: hcon 0000000093bc551f
hci_chan_list_flush:2780: hcon 0000000093bc551f
__iso_chan_add:214: conn 00000000768ae504
    <Note: this conn was already freed in iso_conn_del above>
iso_sock_clear_timer:117: sock 0000000098323f95 state 3
general protection fault, probably for non-canonical address 0x30b29c630930aec8: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1920 Comm: bluetoothd Tainted: G            E      6.3.0-rc7+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:detach_if_pending+0x28/0xd0
Code: 90 90 0f 1f 44 00 00 48 8b 47 08 48 85 c0 0f 84 ad 00 00 00 55 89 d5 53 48 83 3f 00 48 89 fb 74 7d 66 90 48 8b 03 48 8b 53 08 <>
RSP: 0018:ffffb90841a67d08 EFLAGS: 00010007
RAX: 0000000000000000 RBX: ffff9141bd5061b8 RCX: 0000000000000000
RDX: 30b29c630930aec8 RSI: ffff9141fdd21e80 RDI: ffff9141bd5061b8
RBP: 0000000000000001 R08: 0000000000000000 R09: ffffb90841a67b88
R10: 0000000000000003 R11: ffffffff8613f558 R12: ffff9141fdd21e80
R13: 0000000000000000 R14: ffff9141b5976010 R15: ffff914185755338
FS:  00007f45768bd840(0000) GS:ffff9141fdd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000619000424074 CR3: 0000000009f5e005 CR4: 0000000000170ee0
Call Trace:
 <TASK>
 timer_delete+0x48/0x80
 try_to_grab_pending+0xdf/0x170
 __cancel_work+0x37/0xb0
 iso_connect_cis+0x141/0x400 [bluetooth]
===============================================================

Trace with NULL conn->hcon in state BT_CONNECT:
===============================================================
__iso_sock_close:619: sk 00000000f7c71fc5 state 1 socket 00000000d90c5fe5
...
__iso_sock_close:619: sk 00000000f7c71fc5 state 8 socket 00000000d90c5fe5
iso_chan_del:153: sk 00000000f7c71fc5, conn 0000000022c03a7e, err 104
...
iso_sock_connect:862: sk 00000000129b56c3
iso_connect_cis:348: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7d:2a
hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7d:2a
hci_dev_hold:1495: hci0 orig refcnt 19
__iso_chan_add:214: conn 0000000022c03a7e
    <Note: reusing old conn>
iso_sock_clear_timer:117: sock 00000000129b56c3 state 3
...
iso_sock_ready:1485: sk 00000000129b56c3
...
iso_sock_sendmsg:1077: sock 00000000e5013966, sk 00000000129b56c3
BUG: kernel NULL pointer dereference, address: 00000000000006a8
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1403 Comm: wireplumber Tainted: G            E      6.3.0-rc7+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:iso_sock_sendmsg+0x63/0x2a0 [bluetooth]
===============================================================

Fixes: 241f51931c35 ("Bluetooth: ISO: Avoid circular locking dependency")
Fixes: 6a5ad251b7cd ("Bluetooth: ISO: Fix possible circular locking dependency")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_event: call disconnect callback before deleting conn

[ Upstream commit 7f7cfcb6f0825652973b780f248603e23f16ee90 ]

In hci_cs_disconnect, we do hci_conn_del even if disconnection failed.

ISO, L2CAP and SCO connections refer to the hci_conn without
hci_conn_get, so disconn_cfm must be called so they can clean up their
conn, otherwise use-after-free occurs.

ISO:
==========================================================
iso_sock_connect:880: sk 00000000eabd6557
iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
...
iso_conn_add:140: hcon 000000001696f1fd conn 00000000b6251073
hci_dev_put:1487: hci0 orig refcnt 17
__iso_chan_add:214: conn 00000000b6251073
iso_sock_clear_timer:117: sock 00000000eabd6557 state 3
...
hci_rx_work:4085: hci0 Event packet
hci_event_packet:7601: hci0: event 0x0f
hci_cmd_status_evt:4346: hci0: opcode 0x0406
hci_cs_disconnect:2760: hci0: status 0x0c
hci_sent_cmd_data:3107: hci0 opcode 0x0406
hci_conn_del:1151: hci0 hcon 000000001696f1fd handle 2560
hci_conn_unlink:1102: hci0: hcon 000000001696f1fd
hci_conn_drop:1451: hcon 00000000d8521aaf orig refcnt 2
hci_chan_list_flush:2780: hcon 000000001696f1fd
hci_dev_put:1487: hci0 orig refcnt 21
hci_dev_put:1487: hci0 orig refcnt 20
hci_req_cmd_complete:3978: opcode 0x0406 status 0x0c
... <no iso_* activity on sk/conn> ...
iso_sock_sendmsg:1098: sock 00000000dea5e2e0, sk 00000000eabd6557
BUG: kernel NULL pointer dereference, address: 0000000000000668
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:iso_sock_sendmsg (net/bluetooth/iso.c:1112) bluetooth
==========================================================

L2CAP:
==================================================================
hci_cmd_status_evt:4359: hci0: opcode 0x0406
hci_cs_disconnect:2760: hci0: status 0x0c
hci_sent_cmd_data:3085: hci0 opcode 0x0406
hci_conn_del:1151: hci0 hcon ffff88800c999000 handle 3585
hci_conn_unlink:1102: hci0: hcon ffff88800c999000
hci_chan_list_flush:2780: hcon ffff88800c999000
hci_chan_del:2761: hci0 hcon ffff88800c999000 chan ffff888018ddd280
...
BUG: KASAN: slab-use-after-free in hci_send_acl+0x2d/0x540 [bluetooth]
Read of size 8 at addr ffff888018ddd298 by task bluetoothd/1175

CPU: 0 PID: 1175 Comm: bluetoothd Tainted: G            E      6.4.0-rc4+ #2
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x5b/0x90
 print_report+0xcf/0x670
 ? __virt_addr_valid+0xf8/0x180
 ? hci_send_acl+0x2d/0x540 [bluetooth]
 kasan_report+0xa8/0xe0
 ? hci_send_acl+0x2d/0x540 [bluetooth]
 hci_send_acl+0x2d/0x540 [bluetooth]
 ? __pfx___lock_acquire+0x10/0x10
 l2cap_chan_send+0x1fd/0x1300 [bluetooth]
 ? l2cap_sock_sendmsg+0xf2/0x170 [bluetooth]
 ? __pfx_l2cap_chan_send+0x10/0x10 [bluetooth]
 ? lock_release+0x1d5/0x3c0
 ? mark_held_locks+0x1a/0x90
 l2cap_sock_sendmsg+0x100/0x170 [bluetooth]
 sock_write_iter+0x275/0x280
 ? __pfx_sock_write_iter+0x10/0x10
 ? __pfx___lock_acquire+0x10/0x10
 do_iter_readv_writev+0x176/0x220
 ? __pfx_do_iter_readv_writev+0x10/0x10
 ? find_held_lock+0x83/0xa0
 ? selinux_file_permission+0x13e/0x210
 do_iter_write+0xda/0x340
 vfs_writev+0x1b4/0x400
 ? __pfx_vfs_writev+0x10/0x10
 ? __seccomp_filter+0x112/0x750
 ? populate_seccomp_data+0x182/0x220
 ? __fget_light+0xdf/0x100
 ? do_writev+0x19d/0x210
 do_writev+0x19d/0x210
 ? __pfx_do_writev+0x10/0x10
 ? mark_held_locks+0x1a/0x90
 do_syscall_64+0x60/0x90
 ? lockdep_hardirqs_on_prepare+0x149/0x210
 ? do_syscall_64+0x6c/0x90
 ? lockdep_hardirqs_on_prepare+0x149/0x210
 entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7ff45cb23e64
Code: 15 d1 1f 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d 9d a7 0d 00 00 74 13 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
RSP: 002b:00007fff21ae09b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007ff45cb23e64
RDX: 0000000000000001 RSI: 00007fff21ae0aa0 RDI: 0000000000000017
RBP: 00007fff21ae0aa0 R08: 000000000095a8a0 R09: 0000607000053f40
R10: 0000000000000001 R11: 0000000000000202 R12: 00007fff21ae0ac0
R13: 00000fffe435c150 R14: 00007fff21ae0a80 R15: 000060f000000040
 </TASK>

Allocated by task 771:
 kasan_save_stack+0x33/0x60
 kasan_set_track+0x25/0x30
 __kasan_kmalloc+0xaa/0xb0
 hci_chan_create+0x67/0x1b0 [bluetooth]
 l2cap_conn_add.part.0+0x17/0x590 [bluetooth]
 l2cap_connect_cfm+0x266/0x6b0 [bluetooth]
 hci_le_remote_feat_complete_evt+0x167/0x310 [bluetooth]
 hci_event_packet+0x38d/0x800 [bluetooth]
 hci_rx_work+0x287/0xb20 [bluetooth]
 process_one_work+0x4f7/0x970
 worker_thread+0x8f/0x620
 kthread+0x17f/0x1c0
 ret_from_fork+0x2c/0x50

Freed by task 771:
 kasan_save_stack+0x33/0x60
 kasan_set_track+0x25/0x30
 kasan_save_free_info+0x2e/0x50
 ____kasan_slab_free+0x169/0x1c0
 slab_free_freelist_hook+0x9e/0x1c0
 __kmem_cache_free+0xc0/0x310
 hci_chan_list_flush+0x46/0x90 [bluetooth]
 hci_conn_cleanup+0x7d/0x330 [bluetooth]
 hci_cs_disconnect+0x35d/0x530 [bluetooth]
 hci_cmd_status_evt+0xef/0x2b0 [bluetooth]
 hci_event_packet+0x38d/0x800 [bluetooth]
 hci_rx_work+0x287/0xb20 [bluetooth]
 process_one_work+0x4f7/0x970
 worker_thread+0x8f/0x620
 kthread+0x17f/0x1c0
 ret_from_fork+0x2c/0x50
==================================================================

Fixes: b8d290525e39 ("Bluetooth: clean up connection in hci_cs_disconnect")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync

[ Upstream commit 195ef75e19287b4bc413da3e3e3722b030ac881e ]

hci_update_accept_list_sync iterates over hdev->pend_le_conns and
hdev->pend_le_reports, and waits for controller events in the loop body,
without holding hdev lock.

Meanwhile, these lists and the items may be modified e.g. by
le_scan_cleanup. This can invalidate the list cursor or any other item
in the list, resulting to invalid behavior (eg use-after-free).

Use RCU for the hci_conn_params action lists. Since the loop bodies in
hci_sync block and we cannot use RCU or hdev->lock for the whole loop,
copy list items first and then iterate on the copy. Only the flags field
is written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we
read valid values.

Free params everywhere with hci_conn_params_free so the cleanup is
guaranteed to be done properly.

This fixes the following, which can be triggered e.g. by BlueZ new
mgmt-tester case "Add + Remove Device Nowait - Success", or by changing
hci_le_set_cig_params to always return false, and running iso-tester:

==================================================================
BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32

Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107)
print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65)
? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
kasan_report (mm/kasan/report.c:538)
? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780)
? mutex_lock (kernel/locking/mutex.c:282)
? __pfx_mutex_lock (kernel/locking/mutex.c:282)
? __pfx_mutex_unlock (kernel/locking/mutex.c:538)
? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861)
hci_cmd_sync_work (net/bluetooth/hci_sync.c:306)
process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399)
worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538)
? __pfx_worker_thread (kernel/workqueue.c:2480)
kthread (kernel/kthread.c:376)
? __pfx_kthread (kernel/kthread.c:331)
ret_from_fork (arch/x86/entry/entry_64.S:314)
</TASK>

Allocated by task 31:
kasan_save_stack (mm/kasan/common.c:46)
kasan_set_track (mm/kasan/common.c:52)
__kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383)
hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277)
hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589)
hci_connect_cis (net/bluetooth/hci_conn.c:2266)
iso_connect_cis (net/bluetooth/iso.c:390)
iso_sock_connect (net/bluetooth/iso.c:899)
__sys_connect (net/socket.c:2003 net/socket.c:2020)
__x64_sys_connect (net/socket.c:2027)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

Freed by task 15:
kasan_save_stack (mm/kasan/common.c:46)
kasan_set_track (mm/kasan/common.c:52)
kasan_save_free_info (mm/kasan/generic.c:523)
__kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244)
__kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800)
hci_conn_params_del (net/bluetooth/hci_core.c:2323)
le_scan_cleanup (net/bluetooth/hci_conn.c:202)
process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399)
worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538)
kthread (kernel/kthread.c:376)
ret_from_fork (arch/x86/entry/entry_64.S:314)
==================================================================

Fixes: e8907f76544f ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: skip bound chain on rule flush

[ Upstream commit 6eaf41e87a223ae6f8e7a28d6e78384ad7e407f8 ]

Skip bound chain when flushing table rules, the rule that owns this
chain releases these objects.

Otherwise, the following warning is triggered:

  WARNING: CPU: 2 PID: 1217 at net/netfilter/nf_tables_api.c:2013 nf_tables_chain_destroy+0x1f7/0x210 [nf_tables]
  CPU: 2 PID: 1217 Comm: chain-flush Not tainted 6.1.39 #1
  RIP: 0010:nf_tables_chain_destroy+0x1f7/0x210 [nf_tables]

Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Reported-by: Kevin Rich <kevinrich1337@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: skip bound chain in netns release path

[ Upstream commit 751d460ccff3137212f47d876221534bf0490996 ]

Skip bound chain from netns release path, the rule that owns this chain
releases these objects.

Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_set_pipapo: fix improper element removal

[ Upstream commit 87b5a5c209405cb6b57424cdfa226a6dbd349232 ]

end key should be equal to start unless NFT_SET_EXT_KEY_END is present.

Its possible to add elements that only have a start key
("{ 1.0.0.0 . 2.0.0.0 }") without an internval end.

Insertion treats this via:

if (nft_set_ext_exists(ext, NFT_SET_EXT_KEY_END))
   end = (const u8 *)nft_set_ext_key_end(ext)->data;
else
   end = start;

but removal side always uses nft_set_ext_key_end().
This is wrong and leads to garbage remaining in the set after removal
next lookup/insert attempt will give:

BUG: KASAN: slab-use-after-free in pipapo_get+0x8eb/0xb90
Read of size 1 at addr ffff888100d50586 by task nft-pipapo_uaf_/1399
Call Trace:
 kasan_report+0x105/0x140
 pipapo_get+0x8eb/0xb90
 nft_pipapo_insert+0x1dc/0x1710
 nf_tables_newsetelem+0x31f5/0x4e00
 ..

Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reported-by: lonial con <kongln9170@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: can't schedule in nft_chain_validate

[ Upstream commit 314c82841602a111c04a7210c21dc77e0d560242 ]

Can be called via nft set element list iteration, which may acquire
rcu and/or bh read lock (depends on set type).

BUG: sleeping function called from invalid context at net/netfilter/nf_tables_api.c:3353
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 1232, name: nft
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
2 locks held by nft/1232:
 #0: ffff8881180e3ea8 (&nft_net->commit_mutex){+.+.}-{3:3}, at: nf_tables_valid_genid
 #1: ffffffff83f5f540 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire
Call Trace:
 nft_chain_validate
 nft_lookup_validate_setelem
 nft_pipapo_walk
 nft_lookup_validate
 nft_chain_validate
 nft_immediate_validate
 nft_chain_validate
 nf_tables_validate
 nf_tables_abort

No choice but to move it to nf_tables_validate().

Fixes: 81ea01066741 ("netfilter: nf_tables: add rescheduling points during loop detection walks")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: fix spurious set element insertion failure

[ Upstream commit ddbd8be68941985f166f5107109a90ce13147c44 ]

On some platforms there is a padding hole in the nft_verdict
structure, between the verdict code and the chain pointer.

On element insertion, if the new element clashes with an existing one and
NLM_F_EXCL flag isn't set, we want to ignore the -EEXIST error as long as
the data associated with duplicated element is the same as the existing
one.  The data equality check uses memcmp.

For normal data (NFT_DATA_VALUE) this works fine, but for NFT_DATA_VERDICT
padding area leads to spurious failure even if the verdict data is the
same.

This then makes the insertion fail with 'already exists' error, even
though the new "key : data" matches an existing entry and userspace
told the kernel that it doesn't want to receive an error indication.

Fixes: c016c7e45ddf ("netfilter: nf_tables: honor NLM_F_EXCL flag in set element insertion")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek: Fix generic fixup definition for cs35l41 amp

[ Upstream commit f7b069cf08816252f494d193b9ecdff172bf9aa1 ]

Generic fixup for CS35L41 amplifies should not have vendor specific
chained fixup. For ThinkPad laptops with led issue, we can just add
specific fixup.

Fixes: a6ac60b36dade (ALSA: hda/realtek: Fix mute led issue on thinkpad with cs35l41 s-codec)
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230720082022.13033-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

llc: Don't drop packet from non-root netns.

[ Upstream commit 6631463b6e6673916d2481f692938f393148aa82 ]

Now these upper layer protocol handlers can be called from llc_rcv()
as sap->rcv_func(), which is registered by llc_sap_open().

  * function which is passed to register_8022_client()
    -> no in-kernel user calls register_8022_client().

  * snap_rcv()
    `- proto->rcvfunc() : registered by register_snap_client()
       -> aarp_rcv() and atalk_rcv() drop packets from non-root netns

  * stp_pdu_rcv()
    `- garp_protos[]->rcv() : registered by stp_proto_register()
       -> garp_pdu_rcv() and br_stp_rcv() are netns-aware

So, we can safely remove the netns restriction in llc_rcv().

Fixes: e730c15519d0 ("[NET]: Make packet reception network namespace safe")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: au1200fb: Fix missing IRQ check in au1200fb_drv_probe

[ Upstream commit 4e88761f5f8c7869f15a2046b1a1116f4fab4ac8 ]

This func misses checking for platform_get_irq()'s call and may passes the
negative error codes to request_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.

Fix this by stop calling request_irq() with invalid IRQ #s.

Fixes: 1630d85a8312 ("au1200fb: fix hardcoded IRQ")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "tcp: avoid the lookup process failing to get sk in ehash table"

[ Upstream commit 81b3ade5d2b98ad6e0a473b0e1e420a801275592 ]

This reverts commit 3f4ca5fafc08881d7a57daa20449d171f2887043.

Commit 3f4ca5fafc08 ("tcp: avoid the lookup process failing to get sk in
ehash table") reversed the order in how a socket is inserted into ehash
to fix an issue that ehash-lookup could fail when reqsk/full sk/twsk are
swapped.  However, it introduced another lookup failure.

The full socket in ehash is allocated from a slab with SLAB_TYPESAFE_BY_RCU
and does not have SOCK_RCU_FREE, so the socket could be reused even while
it is being referenced on another CPU doing RCU lookup.

Let's say a socket is reused and inserted into the same hash bucket during
lookup.  After the blamed commit, a new socket is inserted at the end of
the list.  If that happens, we will skip sockets placed after the previous
position of the reused socket, resulting in ehash lookup failure.

As described in Documentation/RCU/rculist_nulls.rst, we should insert a
new socket at the head of the list to avoid such an issue.

This issue, the swap-lookup-failure, and another variant reported in [0]
can all be handled properly by adding a locked ehash lookup suggested by
Eric Dumazet [1].

However, this issue could occur for every packet, thus more likely than
the other two races, so let's revert the change for now.

Link: https://lore.kernel.org/netdev/20230606064306.9192-1-duanmuquan@baidu.com/
Link: https://lore.kernel.org/netdev/CANn89iK8snOz8TYOhhwfimC7ykYA78GA3Nyv8x06SZYa1nKdyA@mail.gmail.com/
Fixes: 3f4ca5fafc08 ("tcp: avoid the lookup process failing to get sk in ehash table")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230717215918.15723-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net:ipv6: check return value of pskb_trim()

[ Upstream commit 4258faa130be4ea43e5e2d839467da421b8ff274 ]

goto tx_err if an unexpected result is returned by pskb_tirm()
in ip6erspan_tunnel_xmit().

Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipv4: Use kfree_sensitive instead of kfree

[ Upstream commit daa751444fd9d4184270b1479d8af49aaf1a1ee6 ]

key might contain private part of the key, so better use
kfree_sensitive to free it.

Fixes: 38320c70d282 ("[IPSEC]: Use crypto_aead and authenc in ESP")
Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around tcp_rsk(req)->ts_recent

[ Upstream commit eba20811f32652bc1a52d5e7cc403859b86390d9 ]

TCP request sockets are lockless, tcp_rsk(req)->ts_recent
can change while being read by another cpu as syzbot noticed.

This is harmless, but we should annotate the known races.

Note that tcp_check_req() changes req->ts_recent a bit early,
we might change this in the future.

BUG: KCSAN: data-race in tcp_check_req / tcp_check_req

write to 0xffff88813c8afb84 of 4 bytes by interrupt on cpu 1:
tcp_check_req+0x694/0xc70 net/ipv4/tcp_minisocks.c:762
tcp_v4_rcv+0x12db/0x1b70 net/ipv4/tcp_ipv4.c:2071
ip_protocol_deliver_rcu+0x356/0x6d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x13c/0x1a0 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_local_deliver+0xec/0x1c0 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:468 [inline]
ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_rcv+0x197/0x270 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5493 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5607
process_backlog+0x21f/0x380 net/core/dev.c:5935
__napi_poll+0x60/0x3b0 net/core/dev.c:6498
napi_poll net/core/dev.c:6565 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6698
__do_softirq+0xc1/0x265 kernel/softirq.c:571
do_softirq+0x7e/0xb0 kernel/softirq.c:472
__local_bh_enable_ip+0x64/0x70 kernel/softirq.c:396
local_bh_enable+0x1f/0x20 include/linux/bottom_half.h:33
rcu_read_unlock_bh include/linux/rcupdate.h:843 [inline]
__dev_queue_xmit+0xabb/0x1d10 net/core/dev.c:4271
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
neigh_hh_output include/net/neighbour.h:528 [inline]
neigh_output include/net/neighbour.h:542 [inline]
ip_finish_output2+0x700/0x840 net/ipv4/ip_output.c:229
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:317
NF_HOOK_COND include/linux/netfilter.h:292 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:431
dst_output include/net/dst.h:458 [inline]
ip_local_out net/ipv4/ip_output.c:126 [inline]
__ip_queue_xmit+0xa4d/0xa70 net/ipv4/ip_output.c:533
ip_queue_xmit+0x38/0x40 net/ipv4/ip_output.c:547
__tcp_transmit_skb+0x1194/0x16e0 net/ipv4/tcp_output.c:1399
tcp_transmit_skb net/ipv4/tcp_output.c:1417 [inline]
tcp_write_xmit+0x13ff/0x2fd0 net/ipv4/tcp_output.c:2693
__tcp_push_pending_frames+0x6a/0x1a0 net/ipv4/tcp_output.c:2877
tcp_push_pending_frames include/net/tcp.h:1952 [inline]
__tcp_sock_set_cork net/ipv4/tcp.c:3336 [inline]
tcp_sock_set_cork+0xe8/0x100 net/ipv4/tcp.c:3343
rds_tcp_xmit_path_complete+0x3b/0x40 net/rds/tcp_send.c:52
rds_send_xmit+0xf8d/0x1420 net/rds/send.c:422
rds_send_worker+0x42/0x1d0 net/rds/threads.c:200
process_one_work+0x3e6/0x750 kernel/workqueue.c:2408
worker_thread+0x5f2/0xa10 kernel/workqueue.c:2555
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

read to 0xffff88813c8afb84 of 4 bytes by interrupt on cpu 0:
tcp_check_req+0x32a/0xc70 net/ipv4/tcp_minisocks.c:622
tcp_v4_rcv+0x12db/0x1b70 net/ipv4/tcp_ipv4.c:2071
ip_protocol_deliver_rcu+0x356/0x6d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x13c/0x1a0 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_local_deliver+0xec/0x1c0 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:468 [inline]
ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_rcv+0x197/0x270 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5493 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5607
process_backlog+0x21f/0x380 net/core/dev.c:5935
__napi_poll+0x60/0x3b0 net/core/dev.c:6498
napi_poll net/core/dev.c:6565 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6698
__do_softirq+0xc1/0x265 kernel/softirq.c:571
run_ksoftirqd+0x17/0x20 kernel/softirq.c:939
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

value changed: 0x1cd237f1 -> 0x1cd237f2

Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230717144445.653164-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-races around tcp_rsk(req)->txhash

[ Upstream commit 5e5265522a9a7f91d1b0bd411d634bdaf16c80cd ]

TCP request sockets are lockless, some of their fields
can change while being read by another cpu as syzbot noticed.

This is usually harmless, but we should annotate the known
races.

This patch takes care of tcp_rsk(req)->txhash,
a separate one is needed for tcp_rsk(req)->ts_recent.

BUG: KCSAN: data-race in tcp_make_synack / tcp_rtx_synack

write to 0xffff8881362304bc of 4 bytes by task 32083 on cpu 1:
tcp_rtx_synack+0x9d/0x2a0 net/ipv4/tcp_output.c:4213
inet_rtx_syn_ack+0x38/0x80 net/ipv4/inet_connection_sock.c:880
tcp_check_req+0x379/0xc70 net/ipv4/tcp_minisocks.c:665
tcp_v6_rcv+0x125b/0x1b20 net/ipv6/tcp_ipv6.c:1673
ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437
ip6_input_finish net/ipv6/ip6_input.c:482 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:468 [inline]
ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:303 [inline]
ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5452 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566
netif_receive_skb_internal net/core/dev.c:5652 [inline]
netif_receive_skb+0x4a/0x310 net/core/dev.c:5711
tun_rx_batched+0x3bf/0x400
tun_get_user+0x1d24/0x22b0 drivers/net/tun.c:1997
tun_chr_write_iter+0x18e/0x240 drivers/net/tun.c:2043
call_write_iter include/linux/fs.h:1871 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x4ab/0x7d0 fs/read_write.c:584
ksys_write+0xeb/0x1a0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x42/0x50 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffff8881362304bc of 4 bytes by task 32078 on cpu 0:
tcp_make_synack+0x367/0xb40 net/ipv4/tcp_output.c:3663
tcp_v6_send_synack+0x72/0x420 net/ipv6/tcp_ipv6.c:544
tcp_conn_request+0x11a8/0x1560 net/ipv4/tcp_input.c:7059
tcp_v6_conn_request+0x13f/0x180 net/ipv6/tcp_ipv6.c:1175
tcp_rcv_state_process+0x156/0x1de0 net/ipv4/tcp_input.c:6494
tcp_v6_do_rcv+0x98a/0xb70 net/ipv6/tcp_ipv6.c:1509
tcp_v6_rcv+0x17b8/0x1b20 net/ipv6/tcp_ipv6.c:1735
ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437
ip6_input_finish net/ipv6/ip6_input.c:482 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:468 [inline]
ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:303 [inline]
ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5452 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566
netif_receive_skb_internal net/core/dev.c:5652 [inline]
netif_receive_skb+0x4a/0x310 net/core/dev.c:5711
tun_rx_batched+0x3bf/0x400
tun_get_user+0x1d24/0x22b0 drivers/net/tun.c:1997
tun_chr_write_iter+0x18e/0x240 drivers/net/tun.c:2043
call_write_iter include/linux/fs.h:1871 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x4ab/0x7d0 fs/read_write.c:584
ksys_write+0xeb/0x1a0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x42/0x50 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x91d25731 -> 0xe79325cd

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 32078 Comm: syz-executor.4 Not tainted 6.5.0-rc1-syzkaller-00033-geb26cbb1a754 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023

Fixes: 58d607d3e52f ("tcp: provide skb->hash to synack packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230717144445.653164-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipv4: use consistent txhash in TIME_WAIT and SYN_RECV

[ Upstream commit c0a8966e2bc7d31f77a7246947ebc09c1ff06066 ]

When using IPv4/TCP, skb->hash comes from sk->sk_txhash except in
TIME_WAIT and SYN_RECV where it's not set in the reply skb from
ip_send_unicast_reply. Those packets will have a mismatched hash with
others from the same flow as their hashes will be 0. IPv6 does not have
the same issue as the hash is set from the socket txhash in those cases.

This commits sets the hash in the reply skb from ip_send_unicast_reply,
which makes the IPv4 code behaving like IPv6.

Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 5e5265522a9a ("tcp: annotate data-races around tcp_rsk(req)->txhash")
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: Prevent garbled TX queue with XDP ZEROCOPY

[ Upstream commit 78adb4bcf99effbb960c5f9091e2e062509d1030 ]

In normal operation, each populated queue item has
next_to_watch pointing to the last TX desc of the packet,
while each cleaned item has it set to 0. In particular,
next_to_use that points to the next (necessarily clean)
item to use has next_to_watch set to 0.

When the TX queue is used both by an application using
AF_XDP with ZEROCOPY as well as a second non-XDP application
generating high traffic, the queue pointers can get in
an invalid state where next_to_use points to an item
where next_to_watch is NOT set to 0.

However, the implementation assumes at several places
that this is never the case, so if it does hold,
bad things happen. In particular, within the loop inside
of igc_clean_tx_irq(), next_to_clean can overtake next_to_use.
Finally, this prevents any further transmission via
this queue and it never gets unblocked or signaled.
Secondly, if the queue is in this garbled state,
the inner loop of igc_clean_tx_ring() will never terminate,
completely hogging a CPU core.

The reason is that igc_xdp_xmit_zc() reads next_to_use
before acquiring the lock, and writing it back
(potentially unmodified) later. If it got modified
before locking, the outdated next_to_use is written
pointing to an item that was already used elsewhere
(and thus next_to_watch got written).

Fixes: 9acf59a752d4 ("igc: Enable TX via AF_XDP zero-copy")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230717175444.3217831-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: Avoid transmit queue timeout for XDP

[ Upstream commit 95b681485563c64585de78662ee52d06b7fa47d9 ]

High XDP load triggers the netdev watchdog:

|NETDEV WATCHDOG: enp3s0 (igc): transmit queue 2 timed out

The reason is the Tx queue transmission start (txq->trans_start) is not updated
in XDP code path. Therefore, add it for all XDP transmission functions.

Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 78adb4bcf99e ("igc: Prevent garbled TX queue with XDP ZEROCOPY")
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, arm64: Fix BTI type used for freplace attached functions

[ Upstream commit a3f25d614bc73b45e8f02adc6769876dfd16ca84 ]

When running an freplace attached bpf program on an arm64 system w were
seeing the following issue:
  Unhandled 64-bit el1h sync exception on CPU47, ESR 0x0000000036000003 -- BTI

After a bit of work to track it down I determined that what appeared to be
happening is that the 'bti c' at the start of the program was somehow being
reached after a 'br' instruction. Further digging pointed me toward the
fact that the function was attached via freplace. This in turn led me to
build_plt which I believe is invoking the long jump which is triggering
this error.

To resolve it we can replace the 'bti c' with 'bti jc' and add a comment
explaining why this has to be modified as such.

Fixes: b2ad54e1533e ("bpf, arm64: Implement bpf_arch_text_poke() for arm64")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/168926677665.316237.9953845318337455525.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Repeat check_max_stack_depth for async callbacks

[ Upstream commit b5e9ad522c4ccd32d322877515cff8d47ed731b9 ]

While the check_max_stack_depth function explores call chains emanating
from the main prog, which is typically enough to cover all possible call
chains, it doesn't explore those rooted at async callbacks unless the
async callback will have been directly called, since unlike non-async
callbacks it skips their instruction exploration as they don't
contribute to stack depth.

It could be the case that the async callback leads to a callchain which
exceeds the stack depth, but this is never reachable while only
exploring the entry point from main subprog. Hence, repeat the check for
the main subprog *and* all async callbacks marked by the symbolic
execution pass of the verifier, as execution of the program may begin at
any of them.

Consider functions with following stack depths:
main: 256
async: 256
foo: 256

main:
    rX = async
    bpf_timer_set_callback(...)

async:
    foo()

Here, async is not descended as it does not contribute to stack depth of
main (since it is referenced using bpf_pseudo_func and not
bpf_pseudo_call). However, when async is invoked asynchronously, it will
end up breaching the MAX_BPF_STACK limit by calling foo.

Hence, in addition to main, we also need to explore call chains
beginning at all async callback subprogs in a program.

Fixes: 7ddc80a476c2 ("bpf: Teach stack depth check about async callbacks.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230717161530.1238-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix subprog idx logic in check_max_stack_depth

[ Upstream commit ba7b3e7d5f9014be65879ede8fd599cb222901c9 ]

The assignment to idx in check_max_stack_depth happens once we see a
bpf_pseudo_call or bpf_pseudo_func. This is not an issue as the rest of
the code performs a few checks and then pushes the frame to the frame
stack, except the case of async callbacks. If the async callback case
causes the loop iteration to be skipped, the idx assignment will be
incorrect on the next iteration of the loop. The value stored in the
frame stack (as the subprogno of the current subprog) will be incorrect.

This leads to incorrect checks and incorrect tail_call_reachable
marking. Save the target subprog in a new variable and only assign to
idx once we are done with the is_async_cb check which may skip pushing
of frame to the frame stack and subsequent stack depth checks and tail
call markings.

Fixes: 7ddc80a476c2 ("bpf: Teach stack depth check about async callbacks.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230717161530.1238-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: Dont allocate BPIDs for LBK interfaces

[ Upstream commit 8fcd7c7b3a38ab5e452f542fda8f7940e77e479a ]

Current driver enables backpressure for LBK interfaces.
But these interfaces do not support this feature.
Hence, this patch fixes the issue by skipping the
backpressure configuration for these interfaces.

Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20230716093741.28063-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

security: keys: Modify mismatched function name

[ Upstream commit 2a4152742025c5f21482e8cebc581702a0fa5b01 ]

No functional modification involved.

security/keys/trusted-keys/trusted_tpm2.c:203: warning: expecting prototype for tpm_buf_append_auth(). Prototype was for tpm2_buf_append_auth() instead.

Fixes: 2e19e10131a0 ("KEYS: trusted: Move TPM2 trusted keys code")
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5524
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: fix reset task race with iavf_remove()

[ Upstream commit c34743daca0eb1dc855831a5210f0800a850088e ]

The reset task is currently scheduled from the watchdog or adminq tasks.
First, all direct calls to schedule the reset task are replaced with the
iavf_schedule_reset(), which is modified to accept the flag showing the
type of reset.

To prevent the reset task from starting once iavf_remove() starts, we need
to check the __IAVF_IN_REMOVE_TASK bit before we schedule it. This is now
easily added to iavf_schedule_reset().

Finally, remove the check for IAVF_FLAG_RESET_NEEDED in the watchdog task.
It is redundant since all callers who set the flag immediately schedules
the reset task.

Fixes: 3ccd54ef44eb ("iavf: Fix init state closure on remove")
Fixes: 14756b2ae265 ("iavf: Fix __IAVF_RESETTING state usage")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: fix a deadlock caused by rtnl and driver's lock circular dependencies

[ Upstream commit d1639a17319ba78a018280cd2df6577a7e5d9fab ]

A driver's lock (crit_lock) is used to serialize all the driver's tasks.
Lockdep, however, shows a circular dependency between rtnl and
crit_lock. This happens when an ndo that already holds the rtnl requests
the driver to reset, since the reset task (in some paths) tries to grab
rtnl to either change real number of queues of update netdev features.

  [566.241851] ======================================================
  [566.241893] WARNING: possible circular locking dependency detected
  [566.241936] 6.2.14-100.fc36.x86_64+debug #1 Tainted: G           OE
  [566.241984] ------------------------------------------------------
  [566.242025] repro.sh/2604 is trying to acquire lock:
  [566.242061] ffff9280fc5ceee8 (&adapter->crit_lock){+.+.}-{3:3}, at: iavf_close+0x3c/0x240 [iavf]
  [566.242167]
               but task is already holding lock:
  [566.242209] ffffffff9976d350 (rtnl_mutex){+.+.}-{3:3}, at: iavf_remove+0x6b5/0x730 [iavf]
  [566.242300]
               which lock already depends on the new lock.

  [566.242353]
               the existing dependency chain (in reverse order) is:
  [566.242401]
               -> #1 (rtnl_mutex){+.+.}-{3:3}:
  [566.242451]        __mutex_lock+0xc1/0xbb0
  [566.242489]        iavf_init_interrupt_scheme+0x179/0x440 [iavf]
  [566.242560]        iavf_watchdog_task+0x80b/0x1400 [iavf]
  [566.242627]        process_one_work+0x2b3/0x560
  [566.242663]        worker_thread+0x4f/0x3a0
  [566.242696]        kthread+0xf2/0x120
  [566.242730]        ret_from_fork+0x29/0x50
  [566.242763]
               -> #0 (&adapter->crit_lock){+.+.}-{3:3}:
  [566.242815]        __lock_acquire+0x15ff/0x22b0
  [566.242869]        lock_acquire+0xd2/0x2c0
  [566.242901]        __mutex_lock+0xc1/0xbb0
  [566.242934]        iavf_close+0x3c/0x240 [iavf]
  [566.242997]        __dev_close_many+0xac/0x120
  [566.243036]        dev_close_many+0x8b/0x140
  [566.243071]        unregister_netdevice_many_notify+0x165/0x7c0
  [566.243116]        unregister_netdevice_queue+0xd3/0x110
  [566.243157]        iavf_remove+0x6c1/0x730 [iavf]
  [566.243217]        pci_device_remove+0x33/0xa0
  [566.243257]        device_release_driver_internal+0x1bc/0x240
  [566.243299]        pci_stop_bus_device+0x6c/0x90
  [566.243338]        pci_stop_and_remove_bus_device+0xe/0x20
  [566.243380]        pci_iov_remove_virtfn+0xd1/0x130
  [566.243417]        sriov_disable+0x34/0xe0
  [566.243448]        ice_free_vfs+0x2da/0x330 [ice]
  [566.244383]        ice_sriov_configure+0x88/0xad0 [ice]
  [566.245353]        sriov_numvfs_store+0xde/0x1d0
  [566.246156]        kernfs_fop_write_iter+0x15e/0x210
  [566.246921]        vfs_write+0x288/0x530
  [566.247671]        ksys_write+0x74/0xf0
  [566.248408]        do_syscall_64+0x58/0x80
  [566.249145]        entry_SYSCALL_64_after_hwframe+0x72/0xdc
  [566.249886]
                 other info that might help us debug this:

  [566.252014]  Possible unsafe locking scenario:

  [566.253432]        CPU0                    CPU1
  [566.254118]        ----                    ----
  [566.254800]   lock(rtnl_mutex);
  [566.255514]                                lock(&adapter->crit_lock);
  [566.256233]                                lock(rtnl_mutex);
  [566.256897]   lock(&adapter->crit_lock);
  [566.257388]
                  *** DEADLOCK ***

The deadlock can be triggered by a script that is continuously resetting
the VF adapter while doing other operations requiring RTNL, e.g:

while :; do
ip link set $VF up
ethtool --set-channels $VF combined 2
ip link set $VF down
ip link set $VF up
ethtool --set-channels $VF combined 4
ip link set $VF down
done

Any operation that triggers a reset can substitute "ethtool --set-channles"

As a fix, add a new task "finish_config" that do all the work which
needs rtnl lock. With the exception of iavf_remove(), all work that
require rtnl should be called from this task.

As for iavf_remove(), at the point where we need to call
unregister_netdevice() (and grab rtnl_lock), we make sure the finish_config
task is not running (cancel_work_sync()) to safely grab rtnl. Subsequent
finish_config work cannot restart after that since the task is guarded
by the __IAVF_IN_REMOVE_TASK bit in iavf_schedule_finish_config().

Fixes: 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Wait for reset in callbacks which trigger it

[ Upstream commit c2ed2403f12c74a74a0091ed5d830e72c58406e8 ]

There was a fail when trying to add the interface to bonding
right after changing the MTU on the interface. It was caused
by bonding interface unable to open the interface due to
interface being in __RESETTING state because of MTU change.

Add new reset_waitqueue to indicate that reset has finished.

Add waiting for reset to finish in callbacks which trigger hw reset:
iavf_set_priv_flags(), iavf_change_mtu() and iavf_set_ringparam().
We use a 5000ms timeout period because on Hyper-V based systems,
this operation takes around 3000-4000ms. In normal circumstances,
it doesn't take more than 500ms to complete.

Add a function iavf_wait_for_reset() to reuse waiting for reset code and
use it also in iavf_set_channels(), which already waits for reset.
We don't use error handling in iavf_set_channels() as this could
cause the device to be in incorrect state if the reset was scheduled
but hit timeout or the waitng function was interrupted by a signal.

Fixes: 4e5e6b5d9d13 ("iavf: Fix return of set the new channel count")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Co-developed-by: Dawid Wesierski <dawidx.wesierski@intel.com>
Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com>
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: make functions static where possible

[ Upstream commit a4aadf0f5905661cd25c366b96cc1c840f05b756 ]

Make all possible functions static.

Move iavf_force_wb() up to avoid forward declaration.

Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: c2ed2403f12c ("iavf: Wait for reset in callbacks which trigger it")
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: send VLAN offloading caps once after VFR

[ Upstream commit 7dcbdf29282fbcdb646dc785e8a57ed2c2fec8ba ]

When the user disables rxvlan offloading and then changes the number of
channels, all VLAN ports are unable to receive traffic.

Changing the number of channels triggers a VFR reset. During re-init, when
VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS is received, we do:
1 - set the IAVF_FLAG_SETUP_NETDEV_FEATURES flag
2 - call
    iavf_set_vlan_offload_features(adapter, 0, netdev->features);

The second step sends to the PF the __default__ features, in this case
aq_required |= IAVF_FLAG_AQ_ENABLE_CTAG_VLAN_STRIPPING

While the first step forces the watchdog task to call
netdev_update_features() ->  iavf_set_features() ->
iavf_set_vlan_offload_features(adapter, netdev->features, features).
Since the user disabled the "rxvlan", this sets:
aq_required |= IAVF_FLAG_AQ_DISABLE_CTAG_VLAN_STRIPPING

When we start processing the AQ commands, both flags are enabled. Since we
process DISABLE_XTAG first then ENABLE_XTAG, this results in the PF
enabling the rxvlan offload. This breaks all communications on the VLAN
net devices.

Fix by removing the call to iavf_set_vlan_offload_features() (second
step). Calling netdev_update_features() from watchdog task is enough for
both init and reset paths.

Fixes: 7598f4b40bd6 ("iavf: Move netdev_update_features() into watchdog task")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: c2ed2403f12c ("iavf: Wait for reset in callbacks which trigger it")
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Move netdev_update_features() into watchdog task

[ Upstream commit 7598f4b40bd60e4a4280de645eb2893eea80b59d ]

Remove netdev_update_features() from iavf_adminq_task(), as it can cause
deadlocks due to needing rtnl_lock. Instead use the
IAVF_FLAG_SETUP_NETDEV_FEATURES flag to indicate that netdev features need
to be updated in the watchdog task. iavf_set_vlan_offload_features()
and iavf_set_queue_vlan_tag_loc() can be called directly from
iavf_virtchnl_completion().

Suggested-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: c2ed2403f12c ("iavf: Wait for reset in callbacks which trigger it")
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: use internal state to free traffic IRQs

[ Upstream commit a77ed5c5b768e9649be240a2d864e5cd9c6a2015 ]

If the system tries to close the netdev while iavf_reset_task() is
running, __LINK_STATE_START will be cleared and netif_running() will
return false in iavf_reinit_interrupt_scheme(). This will result in
iavf_free_traffic_irqs() not being called and a leak as follows:

    [7632.489326] remove_proc_entry: removing non-empty directory 'irq/999', leaking at least 'iavf-enp24s0f0v0-TxRx-0'
    [7632.490214] WARNING: CPU: 0 PID: 10 at fs/proc/generic.c:718 remove_proc_entry+0x19b/0x1b0

is shown when pci_disable_msix() is later called. Fix by using the
internal adapter state. The traffic IRQs will always exist if
state == __IAVF_RUNNING.

Fixes: 5b36e8d04b44 ("i40evf: Enable VF to request an alternate queue allocation")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Fix out-of-bounds when setting channels on remove

[ Upstream commit 7c4bced3caa749ce468b0c5de711c98476b23a52 ]

If we set channels greater during iavf_remove(), and waiting reset done
would be timeout, then returned with error but changed num_active_queues
directly, that will lead to OOB like the following logs. Because the
num_active_queues is greater than tx/rx_rings[] allocated actually.

Reproducer:

  [root@host ~]# cat repro.sh
  #!/bin/bash

  pf_dbsf="0000:41:00.0"
  vf0_dbsf="0000:41:02.0"
  g_pids=()

  function do_set_numvf()
  {
      echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs
      sleep $((RANDOM%3+1))
      echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs
      sleep $((RANDOM%3+1))
  }

  function do_set_channel()
  {
      local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/)
      [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; }
      ifconfig $nic 192.168.18.5 netmask 255.255.255.0
      ifconfig $nic up
      ethtool -L $nic combined 1
      ethtool -L $nic combined 4
      sleep $((RANDOM%3))
  }

  function on_exit()
  {
      local pid
      for pid in "${g_pids[@]}"; do
          kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null
      done
      g_pids=()
  }

  trap "on_exit; exit" EXIT

  while :; do do_set_numvf ; done &
  g_pids+=($!)
  while :; do do_set_channel ; done &
  g_pids+=($!)

  wait

Result:

[ 3506.152887] iavf 0000:41:02.0: Removing device
[ 3510.400799] ==================================================================
[ 3510.400820] BUG: KASAN: slab-out-of-bounds in iavf_free_all_tx_resources+0x156/0x160 [iavf]
[ 3510.400823] Read of size 8 at addr ffff88b6f9311008 by task repro.sh/55536
[ 3510.400823]
[ 3510.400830] CPU: 101 PID: 55536 Comm: repro.sh Kdump: loaded Tainted: G           O     --------- -t - 4.18.0 #1
[ 3510.400832] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021
[ 3510.400835] Call Trace:
[ 3510.400851]  dump_stack+0x71/0xab
[ 3510.400860]  print_address_description+0x6b/0x290
[ 3510.400865]  ? iavf_free_all_tx_resources+0x156/0x160 [iavf]
[ 3510.400868]  kasan_report+0x14a/0x2b0
[ 3510.400873]  iavf_free_all_tx_resources+0x156/0x160 [iavf]
[ 3510.400880]  iavf_remove+0x2b6/0xc70 [iavf]
[ 3510.400884]  ? iavf_free_all_rx_resources+0x160/0x160 [iavf]
[ 3510.400891]  ? wait_woken+0x1d0/0x1d0
[ 3510.400895]  ? notifier_call_chain+0xc1/0x130
[ 3510.400903]  pci_device_remove+0xa8/0x1f0
[ 3510.400910]  device_release_driver_internal+0x1c6/0x460
[ 3510.400916]  pci_stop_bus_device+0x101/0x150
[ 3510.400919]  pci_stop_and_remove_bus_device+0xe/0x20
[ 3510.400924]  pci_iov_remove_virtfn+0x187/0x420
[ 3510.400927]  ? pci_iov_add_virtfn+0xe10/0xe10
[ 3510.400929]  ? pci_get_subsys+0x90/0x90
[ 3510.400932]  sriov_disable+0xed/0x3e0
[ 3510.400936]  ? bus_find_device+0x12d/0x1a0
[ 3510.400953]  i40e_free_vfs+0x754/0x1210 [i40e]
[ 3510.400966]  ? i40e_reset_all_vfs+0x880/0x880 [i40e]
[ 3510.400968]  ? pci_get_device+0x7c/0x90
[ 3510.400970]  ? pci_get_subsys+0x90/0x90
[ 3510.400982]  ? pci_vfs_assigned.part.7+0x144/0x210
[ 3510.400987]  ? __mutex_lock_slowpath+0x10/0x10
[ 3510.400996]  i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e]
[ 3510.401001]  sriov_numvfs_store+0x214/0x290
[ 3510.401005]  ? sriov_totalvfs_show+0x30/0x30
[ 3510.401007]  ? __mutex_lock_slowpath+0x10/0x10
[ 3510.401011]  ? __check_object_size+0x15a/0x350
[ 3510.401018]  kernfs_fop_write+0x280/0x3f0
[ 3510.401022]  vfs_write+0x145/0x440
[ 3510.401025]  ksys_write+0xab/0x160
[ 3510.401028]  ? __ia32_sys_read+0xb0/0xb0
[ 3510.401031]  ? fput_many+0x1a/0x120
[ 3510.401032]  ? filp_close+0xf0/0x130
[ 3510.401038]  do_syscall_64+0xa0/0x370
[ 3510.401041]  ? page_fault+0x8/0x30
[ 3510.401043]  entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 3510.401073] RIP: 0033:0x7f3a9bb842c0
[ 3510.401079] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24
[ 3510.401080] RSP: 002b:00007ffc05f1fe18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 3510.401083] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f3a9bb842c0
[ 3510.401085] RDX: 0000000000000002 RSI: 0000000002327408 RDI: 0000000000000001
[ 3510.401086] RBP: 0000000002327408 R08: 00007f3a9be53780 R09: 00007f3a9c8a4700
[ 3510.401086] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000002
[ 3510.401087] R13: 0000000000000001 R14: 00007f3a9be52620 R15: 0000000000000001
[ 3510.401090]
[ 3510.401093] Allocated by task 76795:
[ 3510.401098]  kasan_kmalloc+0xa6/0xd0
[ 3510.401099]  __kmalloc+0xfb/0x200
[ 3510.401104]  iavf_init_interrupt_scheme+0x26f/0x1310 [iavf]
[ 3510.401108]  iavf_watchdog_task+0x1d58/0x4050 [iavf]
[ 3510.401114]  process_one_work+0x56a/0x11f0
[ 3510.401115]  worker_thread+0x8f/0xf40
[ 3510.401117]  kthread+0x2a0/0x390
[ 3510.401119]  ret_from_fork+0x1f/0x40
[ 3510.401122]  0xffffffffffffffff
[ 3510.401123]

In timeout handling, we should keep the original num_active_queues
and reset num_req_queues to 0.

Fixes: 4e5e6b5d9d13 ("iavf: Fix return of set the new channel count")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Cc: Donglin Peng <pengdonglin@sangfor.com.cn>
Cc: Huang Cun <huangcun@sangfor.com.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Fix use-after-free in free_netdev

[ Upstream commit 5f4fa1672d98fe99d2297b03add35346f1685d6b ]

We do netif_napi_add() for all allocated q_vectors[], but potentially
do netif_napi_del() for part of them, then kfree q_vectors and leave
invalid pointers at dev->napi_list.

Reproducer:

  [root@host ~]# cat repro.sh
  #!/bin/bash

  pf_dbsf="0000:41:00.0"
  vf0_dbsf="0000:41:02.0"
  g_pids=()

  function do_set_numvf()
  {
      echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs
      sleep $((RANDOM%3+1))
      echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs
      sleep $((RANDOM%3+1))
  }

  function do_set_channel()
  {
      local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/)
      [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; }
      ifconfig $nic 192.168.18.5 netmask 255.255.255.0
      ifconfig $nic up
      ethtool -L $nic combined 1
      ethtool -L $nic combined 4
      sleep $((RANDOM%3))
  }

  function on_exit()
  {
      local pid
      for pid in "${g_pids[@]}"; do
          kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null
      done
      g_pids=()
  }

  trap "on_exit; exit" EXIT

  while :; do do_set_numvf ; done &
  g_pids+=($!)
  while :; do do_set_channel ; done &
  g_pids+=($!)

  wait

Result:

[ 4093.900222] ==================================================================
[ 4093.900230] BUG: KASAN: use-after-free in free_netdev+0x308/0x390
[ 4093.900232] Read of size 8 at addr ffff88b4dc145640 by task repro.sh/6699
[ 4093.900233]
[ 4093.900236] CPU: 10 PID: 6699 Comm: repro.sh Kdump: loaded Tainted: G           O     --------- -t - 4.18.0 #1
[ 4093.900238] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021
[ 4093.900239] Call Trace:
[ 4093.900244]  dump_stack+0x71/0xab
[ 4093.900249]  print_address_description+0x6b/0x290
[ 4093.900251]  ? free_netdev+0x308/0x390
[ 4093.900252]  kasan_report+0x14a/0x2b0
[ 4093.900254]  free_netdev+0x308/0x390
[ 4093.900261]  iavf_remove+0x825/0xd20 [iavf]
[ 4093.900265]  pci_device_remove+0xa8/0x1f0
[ 4093.900268]  device_release_driver_internal+0x1c6/0x460
[ 4093.900271]  pci_stop_bus_device+0x101/0x150
[ 4093.900273]  pci_stop_and_remove_bus_device+0xe/0x20
[ 4093.900275]  pci_iov_remove_virtfn+0x187/0x420
[ 4093.900277]  ? pci_iov_add_virtfn+0xe10/0xe10
[ 4093.900278]  ? pci_get_subsys+0x90/0x90
[ 4093.900280]  sriov_disable+0xed/0x3e0
[ 4093.900282]  ? bus_find_device+0x12d/0x1a0
[ 4093.900290]  i40e_free_vfs+0x754/0x1210 [i40e]
[ 4093.900298]  ? i40e_reset_all_vfs+0x880/0x880 [i40e]
[ 4093.900299]  ? pci_get_device+0x7c/0x90
[ 4093.900300]  ? pci_get_subsys+0x90/0x90
[ 4093.900306]  ? pci_vfs_assigned.part.7+0x144/0x210
[ 4093.900309]  ? __mutex_lock_slowpath+0x10/0x10
[ 4093.900315]  i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e]
[ 4093.900318]  sriov_numvfs_store+0x214/0x290
[ 4093.900320]  ? sriov_totalvfs_show+0x30/0x30
[ 4093.900321]  ? __mutex_lock_slowpath+0x10/0x10
[ 4093.900323]  ? __check_object_size+0x15a/0x350
[ 4093.900326]  kernfs_fop_write+0x280/0x3f0
[ 4093.900329]  vfs_write+0x145/0x440
[ 4093.900330]  ksys_write+0xab/0x160
[ 4093.900332]  ? __ia32_sys_read+0xb0/0xb0
[ 4093.900334]  ? fput_many+0x1a/0x120
[ 4093.900335]  ? filp_close+0xf0/0x130
[ 4093.900338]  do_syscall_64+0xa0/0x370
[ 4093.900339]  ? page_fault+0x8/0x30
[ 4093.900341]  entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 4093.900357] RIP: 0033:0x7f16ad4d22c0
[ 4093.900359] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24
[ 4093.900360] RSP: 002b:00007ffd6491b7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 4093.900362] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f16ad4d22c0
[ 4093.900363] RDX: 0000000000000002 RSI: 0000000001a41408 RDI: 0000000000000001
[ 4093.900364] RBP: 0000000001a41408 R08: 00007f16ad7a1780 R09: 00007f16ae1f2700
[ 4093.900364] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000002
[ 4093.900365] R13: 0000000000000001 R14: 00007f16ad7a0620 R15: 0000000000000001
[ 4093.900367]
[ 4093.900368] Allocated by task 820:
[ 4093.900371]  kasan_kmalloc+0xa6/0xd0
[ 4093.900373]  __kmalloc+0xfb/0x200
[ 4093.900376]  iavf_init_interrupt_scheme+0x63b/0x1320 [iavf]
[ 4093.900380]  iavf_watchdog_task+0x3d51/0x52c0 [iavf]
[ 4093.900382]  process_one_work+0x56a/0x11f0
[ 4093.900383]  worker_thread+0x8f/0xf40
[ 4093.900384]  kthread+0x2a0/0x390
[ 4093.900385]  ret_from_fork+0x1f/0x40
[ 4093.900387]  0xffffffffffffffff
[ 4093.900387]
[ 4093.900388] Freed by task 6699:
[ 4093.900390]  __kasan_slab_free+0x137/0x190
[ 4093.900391]  kfree+0x8b/0x1b0
[ 4093.900394]  iavf_free_q_vectors+0x11d/0x1a0 [iavf]
[ 4093.900397]  iavf_remove+0x35a/0xd20 [iavf]
[ 4093.900399]  pci_device_remove+0xa8/0x1f0
[ 4093.900400]  device_release_driver_internal+0x1c6/0x460
[ 4093.900401]  pci_stop_bus_device+0x101/0x150
[ 4093.900402]  pci_stop_and_remove_bus_device+0xe/0x20
[ 4093.900403]  pci_iov_remove_virtfn+0x187/0x420
[ 4093.900404]  sriov_disable+0xed/0x3e0
[ 4093.900409]  i40e_free_vfs+0x754/0x1210 [i40e]
[ 4093.900415]  i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e]
[ 4093.900416]  sriov_numvfs_store+0x214/0x290
[ 4093.900417]  kernfs_fop_write+0x280/0x3f0
[ 4093.900418]  vfs_write+0x145/0x440
[ 4093.900419]  ksys_write+0xab/0x160
[ 4093.900420]  do_syscall_64+0xa0/0x370
[ 4093.900421]  entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 4093.900422]  0xffffffffffffffff
[ 4093.900422]
[ 4093.900424] The buggy address belongs to the object at ffff88b4dc144200
                which belongs to the cache kmalloc-8k of size 8192
[ 4093.900425] The buggy address is located 5184 bytes inside of
                8192-byte region [ffff88b4dc144200, ffff88b4dc146200)
[ 4093.900425] The buggy address belongs to the page:
[ 4093.900427] page:ffffea00d3705000 refcount:1 mapcount:0 mapping:ffff88bf04415c80 index:0x0 compound_mapcount: 0
[ 4093.900430] flags: 0x10000000008100(slab|head)
[ 4093.900433] raw: 0010000000008100 dead000000000100 dead000000000200 ffff88bf04415c80
[ 4093.900434] raw: 0000000000000000 0000000000030003 00000001ffffffff 0000000000000000
[ 4093.900434] page dumped because: kasan: bad access detected
[ 4093.900435]
[ 4093.900435] Memory state around the buggy address:
[ 4093.900436]  ffff88b4dc145500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 4093.900437]  ffff88b4dc145580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 4093.900438] >ffff88b4dc145600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 4093.900438]                                            ^
[ 4093.900439]  ffff88b4dc145680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 4093.900440]  ffff88b4dc145700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 4093.900440] ==================================================================

Although the patch #2 (of 2) can avoid the issue triggered by this
repro.sh, there still are other potential risks that if num_active_queues
is changed to less than allocated q_vectors[] by unexpected, the
mismatched netif_napi_add/del() can also cause UAF.

Since we actually call netif_napi_add() for all allocated q_vectors
unconditionally in iavf_alloc_q_vectors(), so we should fix it by
letting netif_napi_del() match to netif_napi_add().

Fixes: 5eae00c57f5e ("i40evf: main driver core")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Cc: Donglin Peng <pengdonglin@sangfor.com.cn>
Cc: Huang Cun <huangcun@sangfor.com.cn>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: microchip: correct KSZ8795 static MAC table access

[ Upstream commit 4bdf79d686b49ac49373b36466acfb93972c7d7c ]

The KSZ8795 driver code was modified to use on KSZ8863/73, which has
different register definitions.  Some of the new KSZ8795 register
information are wrong compared to previous code.

KSZ8795 also behaves differently in that the STATIC_MAC_TABLE_USE_FID
and STATIC_MAC_TABLE_FID bits are off by 1 when doing MAC table reading
than writing.  To compensate that a special code was added to shift the
register value by 1 before applying those bits.  This is wrong when the
code is running on KSZ8863, so this special code is only executed when
KSZ8795 is detected.

Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips")
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: microchip: ksz8_r_sta_mac_table(): Avoid using error code for empty entries

[ Upstream commit 559901b46810e82ba5321a5e789f994b65d3bc3d ]

Prepare for the next patch by ensuring that ksz8_r_sta_mac_table() does
not use error codes for empty entries. This change will enable better
handling of read/write errors in the upcoming patch.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 4bdf79d686b4 ("net: dsa: microchip: correct KSZ8795 static MAC table access")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: microchip: ksz8: Make ksz8_r_sta_mac_table() static

[ Upstream commit b5751cdd7dbe618a03951bdd4c982a71ba448b1b ]

As ksz8_r_sta_mac_table() is only used within ksz8795.c, there is no need
to export it. Make the function static for better encapsulation.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 4bdf79d686b4 ("net: dsa: microchip: correct KSZ8795 static MAC table access")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: microchip: ksz8: Separate static MAC table operations for code reuse

[ Upstream commit f6636ff69ec4f2c94a5ee1d032b21cfe1e0a5678 ]

Move static MAC table operations to separate functions in order to reuse
the code for add/del_fdb. This is needed to address kernel warnings
caused by the lack of fdb add function support in the current driver.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 4bdf79d686b4 ("net: dsa: microchip: correct KSZ8795 static MAC table access")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: cls_bpf: Undo tcf_bind_filter in case of an error

[ Upstream commit 26a22194927e8521e304ed75c2f38d8068d55fc7 ]

If cls_bpf_offload errors out, we must also undo tcf_bind_filter that
was done before the error.

Fix that by calling tcf_unbind_filter in errout_parms.

Fixes: eadb41489fd2 ("net: cls_bpf: add support for marking filters as hardware-only")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: cls_u32: Undo refcount decrement in case update failed

[ Upstream commit e8d3d78c19be0264a5692bed477c303523aead31 ]

In the case of an update, when TCA_U32_LINK is set, u32_set_parms will
decrement the refcount of the ht_down (struct tc_u_hnode) pointer
present in the older u32 filter which we are replacing. However, if
u32_replace_hw_knode errors out, the update command fails and that
ht_down pointer continues decremented. To fix that, when
u32_replace_hw_knode fails, check if ht_down's refcount was decremented
and undo the decrement.

Fixes: d34e3e181395 ("net: cls_u32: Add support for skip-sw flag to tc u32 classifier.")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: cls_u32: Undo tcf_bind_filter if u32_replace_hw_knode

[ Upstream commit 9cb36faedeafb9720ac236aeae2ea57091d90a09 ]

When u32_replace_hw_knode fails, we need to undo the tcf_bind_filter
operation done at u32_set_parms.

Fixes: d34e3e181395 ("net: cls_u32: Add support for skip-sw flag to tc u32 classifier.")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: cls_matchall: Undo tcf_bind_filter in case of failure after mall_set_parms

[ Upstream commit b3d0e0489430735e2e7626aa37e6462cdd136e9d ]

In case an error occurred after mall_set_parms executed successfully, we
must undo the tcf_bind_filter call it issues.

Fix that by calling tcf_unbind_filter in err_replace_hw_filter label.

Fixes: ec2507d2a306 ("net/sched: cls_matchall: Fix error path")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: ipc3-dtrace: uninitialized data in dfsentry_trace_filter_write()

[ Upstream commit 469e2f28c2cbee2430058c1c9bb6d1675d7195fb ]

This doesn't check how many bytes the simple_write_to_buffer() writes to
the buffer.  The only thing that we know is that the first byte is
initialized and the last byte of the buffer is set to NUL.  However
the middle bytes could be uninitialized.

There is no need to use simple_write_to_buffer().  This code does not
support partial writes but instead passes "pos = 0" as the starting
offset regardless of what the user passed as "*ppos".  Just use the
copy_from_user() function and initialize the whole buffer.

Fixes: 671e0b90051e ("ASoC: SOF: Clone the trace code to ipc3-dtrace as fw_tracing implementation")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/74148292-ce4d-4e01-a1a7-921e6767da14@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: fix mid leak during reconnection after timeout threshold

[ Upstream commit 69cba9d3c1284e0838ae408830a02c4a063104bc ]

When the number of responses with status of STATUS_IO_TIMEOUT
exceeds a specified threshold (NUM_STATUS_IO_TIMEOUT), we reconnect
the connection. But we do not return the mid, or the credits
returned for the mid, or reduce the number of in-flight requests.

This bug could result in the server->in_flight count to go bad,
and also cause a leak in the mids.

This change moves the check to a few lines below where the
response is decrypted, even of the response is read from the
transform header. This way, the code for returning the mids
can be reused.

Also, the cifs_reconnect was reconnecting just the transport
connection before. In case of multi-channel, this may not be
what we want to do after several timeouts. Changed that to
reconnect the session and the tree too.

Also renamed NUM_STATUS_IO_TIMEOUT to a more appropriate name
MAX_STATUS_IO_TIMEOUT.

Fixes: 8e670f77c4a5 ("Handle STATUS_IO_TIMEOUT gracefully")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mtk_eth_soc: handle probe deferral

[ Upstream commit 1d6d537dc55d1f42d16290f00157ac387985b95b ]

Move the call to of_get_ethdev_address to mtk_add_mac which is part of
the probe function and can hence itself return -EPROBE_DEFER should
of_get_ethdev_address return -EPROBE_DEFER. This allows us to entirely
get rid of the mtk_init function.

The problem of of_get_ethdev_address returning -EPROBE_DEFER surfaced
in situations in which the NVMEM provider holding the MAC address has
not yet be loaded at the time mtk_eth_soc is initially probed. In this
case probing of mtk_eth_soc should be deferred instead of falling back
to use a random MAC address, so once the NVMEM provider becomes
available probing can be repeated.

Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bridge: Add extack warning when enabling STP in netns.

[ Upstream commit 56a16035bb6effb37177867cea94c13a8382f745 ]

When we create an L2 loop on a bridge in netns, we will see packets storm
even if STP is enabled.

  # unshare -n
  # ip link add br0 type bridge
  # ip link add veth0 type veth peer name veth1
  # ip link set veth0 master br0 up
  # ip link set veth1 master br0 up
  # ip link set br0 type bridge stp_state 1
  # ip link set br0 up
  # sleep 30
  # ip -s link show br0
  2: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
      link/ether b6:61:98:1c:1c:b5 brd ff:ff:ff:ff:ff:ff
      RX: bytes  packets  errors  dropped missed  mcast
      956553768  12861249 0       0       0       12861249  <-. Keep
      TX: bytes  packets  errors  dropped carrier collsns     |  increasing
      1027834    11951    0       0       0       0         <-'   rapidly

This is because llc_rcv() drops all packets in non-root netns and BPDU
is dropped.

Let's add extack warning when enabling STP in netns.

  # unshare -n
  # ip link add br0 type bridge
  # ip link set br0 type bridge stp_state 1
  Warning: bridge: STP does not work in non-root netns.

Note this commit will be reverted later when we namespacify the whole LLC
infra.

Fixes: e730c15519d0 ("[NET]: Make packet reception network namespace safe")
Suggested-by: Harry Coin <hcoin@quietfountain.com>
Link: https://lore.kernel.org/netdev/0f531295-e289-022d-5add-5ceffa0df9bc@quietfountain.com/
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: ti: cpsw_ale: Fix cpsw_ale_get_field()/cpsw_ale_set_field()

[ Upstream commit b685f1a58956fa36cc01123f253351b25bfacfda ]

CPSW ALE has 75 bit ALE entries which are stored within three 32 bit words.
The cpsw_ale_get_field() and cpsw_ale_set_field() functions assume that the
field will be strictly contained within one word. However, this is not
guaranteed to be the case and it is possible for ALE field entries to span
across up to two words at the most.

Fix the methods to handle getting/setting fields spanning up to two words.

Fixes: db82173f23c5 ("netdev: driver: ethernet: add cpsw address lookup engine support")
Signed-off-by: Tanmay Patil <t-patil@ti.com>
[s-vadapalli@ti.com: rephrased commit message and added Fixes tag]
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dsa: mv88e6xxx: Do a final check before timing out

[ Upstream commit 95ce158b6c93b28842b54b42ad1cb221b9844062 ]

I get sporadic timeouts from the driver when using the
MV88E6352. Reading the status again after the loop fixes the
problem: the operation is successful but goes undetected.

Some added prints show things like this:

[   58.356209] mv88e6085 mdio_mux-0.1:00: Timeout while waiting
    for switch, addr 1b reg 0b, mask 8000, val 0000, data c000
[   58.367487] mv88e6085 mdio_mux-0.1:00: Timeout waiting for
    ATU op 4000, fid 0001
(...)
[   61.826293] mv88e6085 mdio_mux-0.1:00: Timeout while waiting
    for switch, addr 1c reg 18, mask 8000, val 0000, data 9860
[   61.837560] mv88e6085 mdio_mux-0.1:00: Timeout waiting
    for PHY command 1860 to complete

The reason is probably not the commands: I think those are
mostly fine with the 50+50ms timeout, but the problem
appears when OpenWrt brings up several interfaces in
parallel on a system with 7 populated ports: if one of
them take more than 50 ms and waits one or more of the
others can get stuck on the mutex for the switch and then
this can easily multiply.

As we sleep and wait, the function loop needs a final
check after exiting the loop if we were successful.

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Fixes: 35da1dfd9484 ("net: dsa: mv88e6xxx: Improve performance of busy bit polling")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230712223405.861899-1-linus.walleij@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kallsyms: strip LTO-only suffixes from promoted global functions

[ Upstream commit 8cc32a9bbf2934d90762d9de0187adcb5ad46a11 ]

Commit 6eb4bd92c1ce ("kallsyms: strip LTO suffixes from static functions")
stripped all function/variable suffixes started with '.' regardless
of whether those suffixes are generated at LTO mode or not. In fact,
as far as I know, in LTO mode, when a static function/variable is
promoted to the global scope, '.llvm.<...>' suffix is added.

The existing mechanism breaks live patch for a LTO kernel even if
no <symbol>.llvm.<...> symbols are involved. For example, for the following
kernel symbols:
  $ grep bpf_verifier_vlog /proc/kallsyms
  ffffffff81549f60 t bpf_verifier_vlog
  ffffffff8268b430 d bpf_verifier_vlog._entry
  ffffffff8282a958 d bpf_verifier_vlog._entry_ptr
  ffffffff82e12a1f d bpf_verifier_vlog.__already_done
'bpf_verifier_vlog' is a static function. '_entry', '_entry_ptr' and
'__already_done' are static variables used inside 'bpf_verifier_vlog',
so llvm promotes them to file-level static with prefix 'bpf_verifier_vlog.'.
Note that the func-level to file-level static function promotion also
happens without LTO.

Given a symbol name 'bpf_verifier_vlog', with LTO kernel, current mechanism will
return 4 symbols to live patch subsystem which current live patching
subsystem cannot handle it. With non-LTO kernel, only one symbol
is returned.

In [1], we have a lengthy discussion, the suggestion is to separate two
cases:
  (1). new symbols with suffix which are generated regardless of whether
       LTO is enabled or not, and
  (2). new symbols with suffix generated only when LTO is enabled.

The cleanup_symbol_name() should only remove suffixes for case (2).
Case (1) should not be changed so it can work uniformly with or without LTO.

This patch removed LTO-only suffix '.llvm.<...>' so live patching and
tracing should work the same way for non-LTO kernel.
The cleanup_symbol_name() in scripts/kallsyms.c is also changed to have the same
filtering pattern so both kernel and kallsyms tool have the same
expectation on the order of symbols.

 [1] https://lore.kernel.org/live-patching/20230615170048.2382735-1-song@kernel.org/T/#u

Fixes: 6eb4bd92c1ce ("kallsyms: strip LTO suffixes from static functions")
Reported-by: Song Liu <song@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230628181926.4102448-1-yhs@fb.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kallsyms: Correctly sequence symbols when CONFIG_LTO_CLANG=y

[ Upstream commit 010a0aad39fccceba4a07d30d163158a39c704f3 ]

LLVM appends various suffixes for local functions and variables, suffixes
observed:
 - foo.llvm.[0-9a-f]+
 - foo.[0-9a-f]+

Therefore, when CONFIG_LTO_CLANG=y, kallsyms_lookup_name() needs to
truncate the suffix of the symbol name before comparing the local function
or variable name.

Old implementation code:
- if (strcmp(namebuf, name) == 0)
- return kallsyms_sym_address(i);
- if (cleanup_symbol_name(namebuf) && strcmp(namebuf, name) == 0)
- return kallsyms_sym_address(i);

The preceding process is traversed by address from low to high. That is,
for those with the same name after the suffix is removed, the one with
the smallest address is returned first. Therefore, when sorting in the
tool, if the raw names are the same, they should be sorted by address in
ascending order.

ASCII[.]   = 2e
ASCII[0-9] = 30,39
ASCII[A-Z] = 41,5a
ASCII[_]   = 5f
ASCII[a-z] = 61,7a

According to the preceding ASCII code values, the following sorting result
is strictly followed.
 ---------------------------------
|    main-key     |    sub-key    |
|---------------------------------|
|                 |  addr_lowest  |
| <name>          |      ...      |
| <name>.<suffix> |      ...      |
|                 |  addr_highest |
|---------------------------------|
| <name>?<others> |               |   //? is [_A-Za-z0-9]
 ---------------------------------

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Stable-dep-of: 8cc32a9bbf29 ("kallsyms: strip LTO-only suffixes from promoted global functions")
Signed-off-by: Sasha Levin <sashal@kernel.org>

kallsyms: Improve the performance of kallsyms_lookup_name()

[ Upstream commit 60443c88f3a89fd303a9e8c0e84895910675c316 ]

Currently, to search for a symbol, we need to expand the symbols in
'kallsyms_names' one by one, and then use the expanded string for
comparison. It's O(n).

If we sort names in ascending order like addresses, we can also use
binary search. It's O(log(n)).

In order not to change the implementation of "/proc/kallsyms", the table
kallsyms_names[] is still stored in a one-to-one correspondence with the
address in ascending order.

Add array kallsyms_seqs_of_names[], it's indexed by the sequence number
of the sorted names, and the corresponding content is the sequence number
of the sorted addresses. For example:
Assume that the index of NameX in array kallsyms_seqs_of_names[] is 'i',
the content of kallsyms_seqs_of_names[i] is 'k', then the corresponding
address of NameX is kallsyms_addresses[k]. The offset in kallsyms_names[]
is get_symbol_offset(k).

Note that the memory usage will increase by (4 * kallsyms_num_syms)
bytes, the next two patches will reduce (1 * kallsyms_num_syms) bytes
and properly handle the case CONFIG_LTO_CLANG=y.

Performance test results: (x86)
Before:
min=234, max=10364402, avg=5206926
min=267, max=11168517, avg=5207587
After:
min=1016, max=90894, avg=7272
min=1014, max=93470, avg=7293

The average lookup performance of kallsyms_lookup_name() improved 715x.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Stable-dep-of: 8cc32a9bbf29 ("kallsyms: strip LTO-only suffixes from promoted global functions")
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: s3c64xx: clear loopback bit after loopback test

[ Upstream commit 9ec3c5517e22a12d2ff1b71e844f7913641460c6 ]

When SPI loopback transfer is performed, S3C64XX_SPI_MODE_SELF_LOOPBACK
bit still remained. It works as loopback even if the next transfer is
not spi loopback mode.
If not SPI_LOOP, needs to clear S3C64XX_SPI_MODE_SELF_LOOPBACK bit.

Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Fixes: ffb7bcd3b27e ("spi: s3c64xx: support loopback mode")
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20230711082020.138165-1-jaewon02.kim@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: be a bit more careful when setting mirror_num_ret in btrfs_map_block

[ Upstream commit 4e7de35eb7d1a1d4f2dda15f39fbedd4798a0b8d ]

The mirror_num_ret is allowed to be NULL, although it has to be set when
smap is set.  Unfortunately that is not a well enough specifiable
invariant for static type checkers, so add a NULL check to make sure they
are fine.

Fixes: 03793cbbc80f ("btrfs: add fast path for single device io in __btrfs_map_block")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf build: Fix library not found error when using CSLIBS

[ Upstream commit 1feece2780ac2f8de45177fe53979726cee4b3d1 ]

-L only specifies the search path for libraries directly provided in the
link line with -l. Because -lopencsd isn't specified, it's only linked
because it's a dependency of -lopencsd_c_api. Dependencies like this are
resolved using the default system search paths or -rpath-link=... rather
than -L. This means that compilation only works if OpenCSD is installed
to the system rather than provided with the CSLIBS (-L) option.

This could be fixed by adding -Wl,-rpath-link=$(CSLIBS) but that is less
conventional than just adding -lopencsd to the link line so that it uses
-L. -lopencsd seems to have been removed in commit ed17b1914978eddb
("perf tools: Drop requirement for libstdc++.so for libopencsd check")
because it was thought that there was a chance compilation would work
even if it didn't exist, but I think that only applies to libstdc++ so
there is no harm to add it back. libopencsd.so and libopencsd_c_api.so
would always exist together.

Testing
=======

The following scenarios now all work:

 * Cross build with OpenCSD installed
 * Cross build using CSLIBS=...
 * Native build with OpenCSD installed
 * Native build using CSLIBS=...
 * Static cross build with OpenCSD installed
 * Static cross build with CSLIBS=...

Committer testing:

  ⬢[acme@toolbox perf-tools]$ alias m
  alias m='make -k BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools -C tools/perf install-bin && git status && perf test python ;  perf record -o /dev/null sleep 0.01 ; perf stat --null sleep 0.01'
  ⬢[acme@toolbox perf-tools]$ ldd ~/bin/perf | grep csd
   libopencsd_c_api.so.1 => /lib64/libopencsd_c_api.so.1 (0x00007fd49c44e000)
   libopencsd.so.1 => /lib64/libopencsd.so.1 (0x00007fd49bd56000)
  ⬢[acme@toolbox perf-tools]$ cat /etc/redhat-release
  Fedora release 36 (Thirty Six)
  ⬢[acme@toolbox perf-tools]$

Fixes: ed17b1914978eddb ("perf tools: Drop requirement for libstdc++.so for libopencsd check")
Reported-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: coresight@lists.linaro.org
Closes: https://lore.kernel.org/linux-arm-kernel/56905d7a-a91e-883a-b707-9d5f686ba5f1@arm.com/
Link: https://lore.kernel.org/all/36cc4dc6-bf4b-1093-1c0a-876e368af183@kleine-koenig.org/
Link: https://lore.kernel.org/r/20230707154546.456720-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: imxfb: Removed unneeded release_mem_region

[ Upstream commit 45fcc058a75bf5d65cf4c32da44a252fbe873cd4 ]

Remove unnecessary release_mem_region from the error path to prevent
mem region from being released twice, which could avoid resource leak
or other unexpected issues.

Fixes: b083c22d5114 ("video: fbdev: imxfb: Convert request_mem_region + ioremap to devm_ioremap_resource")
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: imxfb: warn about invalid left/right margin

[ Upstream commit 4e47382fbca916d7db95cbf9e2d7ca2e9d1ca3fe ]

Warn about invalid var->left_margin or var->right_margin. Their values
are read from the device tree.

We store var->left_margin-3 and var->right_margin-1 in register
fields. These fields should be >= 0.

Fixes: 7e8549bcee00 ("imxfb: Fix margin settings")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: bcm63xx: fix max prepend length

[ Upstream commit 5158814cbb37bbb38344b3ecddc24ba2ed0365f2 ]

The command word is defined as following:

    /* Command */
    #define SPI_CMD_COMMAND_SHIFT           0
    #define SPI_CMD_DEVICE_ID_SHIFT         4
    #define SPI_CMD_PREPEND_BYTE_CNT_SHIFT  8
    #define SPI_CMD_ONE_BYTE_SHIFT          11
    #define SPI_CMD_ONE_WIRE_SHIFT          12

If the prepend byte count field starts at bit 8, and the next defined
bit is SPI_CMD_ONE_BYTE at bit 11, it can be at most 3 bits wide, and
thus the max value is 7, not 15.

Fixes: b17de076062a ("spi/bcm63xx: work around inability to keep CS up")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://lore.kernel.org/r/20230629071453.62024-1-jonas.gorski@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: renesas: rzg2l: Handle non-unique subnode names

[ Upstream commit bfc374a145ae133613e05b9b89be561f169cb58d ]

Currently, sd1 and sd0 have unique subnode names 'sd1_mux' and 'sd0_mux'.
If we change these to non-unique subnode names such as 'mux' this can
lead to the below conflict as the RZ/G2L pin control driver considers
only the names of the subnodes.

   pinctrl-rzg2l 11030000.pinctrl: pin P47_0 already requested by 11c00000.mmc; cannot claim for 11c10000.mmc
   pinctrl-rzg2l 11030000.pinctrl: pin-376 (11c10000.mmc) status -22
   pinctrl-rzg2l 11030000.pinctrl: could not request pin 376 (P47_0) from group mux  on device pinctrl-rzg2l
   renesas_sdhi_internal_dmac 11c10000.mmc: Error applying setting, reverse things back

Fix this by constructing unique names from the node names of both the
pin control configuration node and its child node, where appropriate.

Based on the work done by Geert for the RZ/V2M pinctrl driver.

Fixes: c4c4637eb57f ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230704111858.215278-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: renesas: rzv2m: Handle non-unique subnode names

[ Upstream commit f46a0b47cc0829acd050213194c5a77351e619b2 ]

The eMMC and SDHI pin control configuration nodes in DT have subnodes
with the same names ("data" and "ctrl").  As the RZ/V2M pin control
driver considers only the names of the subnodes, this leads to
conflicts:

    pinctrl-rzv2m b6250000.pinctrl: pin P8_2 already requested by 85000000.mmc; cannot claim for 85020000.mmc
    pinctrl-rzv2m b6250000.pinctrl: pin-130 (85020000.mmc) status -22
    renesas_sdhi_internal_dmac 85020000.mmc: Error applying setting, reverse things back

Fix this by constructing unique names from the node names of both the
pin control configuration node and its child node, where appropriate.

Reported by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>

Fixes: 92a9b825257614af ("pinctrl: renesas: Add RZ/V2M pin and gpio controller driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/607bd6ab4905b0b1b119a06ef953fa1184505777.1688396717.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/psi: use kernfs polling functions for PSI trigger polling

[ Upstream commit aff037078ecaecf34a7c2afab1341815f90fba5e ]

Destroying psi trigger in cgroup_file_release causes UAF issues when
a cgroup is removed from under a polling process. This is happening
because cgroup removal causes a call to cgroup_file_release while the
actual file is still alive. Destroying the trigger at this point would
also destroy its waitqueue head and if there is still a polling process
on that file accessing the waitqueue, it will step on the freed pointer:

do_select
  vfs_poll
                           do_rmdir
                             cgroup_rmdir
                               kernfs_drain_open_files
                                 cgroup_file_release
                                   cgroup_pressure_release
                                     psi_trigger_destroy
                                       wake_up_pollfree(&t->event_wait)
// vfs_poll is unblocked
                                       synchronize_rcu
                                       kfree(t)
  poll_freewait -> UAF access to the trigger's waitqueue head

Patch [1] fixed this issue for epoll() case using wake_up_pollfree(),
however the same issue exists for synchronous poll() case.
The root cause of this issue is that the lifecycles of the psi trigger's
waitqueue and of the file associated with the trigger are different. Fix
this by using kernfs_generic_poll function when polling on cgroup-specific
psi triggers. It internally uses kernfs_open_node->poll waitqueue head
with its lifecycle tied to the file's lifecycle. This also renders the
fix in [1] obsolete, so revert it.

[1] commit c2dbe32d5db5 ("sched/psi: Fix use-after-free in ep_remove_wait_queue()")

Fixes: 0e94682b73bf ("psi: introduce psi monitor")
Closes: https://lore.kernel.org/all/20230613062306.101831-1-lujialin4@huawei.com/
Reported-by: Lu Jialin <lujialin4@huawei.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230630005612.1014540-1-surenb@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/psi: Allow unprivileged polling of N*2s period

[ Upstream commit d82caa273565b45fcf103148950549af76c314b0 ]

PSI offers 2 mechanisms to get information about a specific resource
pressure. One is reading from /proc/pressure/<resource>, which gives
average pressures aggregated every 2s. The other is creating a pollable
fd for a specific resource and cgroup.

The trigger creation requires CAP_SYS_RESOURCE, and gives the
possibility to pick specific time window and threshold, spawing an RT
thread to aggregate the data.

Systemd would like to provide containers the option to monitor pressure
on their own cgroup and sub-cgroups. For example, if systemd launches a
container that itself then launches services, the container should have
the ability to poll() for pressure in individual services. But neither
the container nor the services are privileged.

This patch implements a mechanism to allow unprivileged users to create
pressure triggers. The difference with privileged triggers creation is
that unprivileged ones must have a time window that's a multiple of 2s.
This is so that we can avoid unrestricted spawning of rt threads, and
use instead the same aggregation mechanism done for the averages, which
runs independently of any triggers.

Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20230330105418.77061-5-cerasuolodomenico@gmail.com
Stable-dep-of: aff037078eca ("sched/psi: use kernfs polling functions for PSI trigger polling")
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/psi: Extract update_triggers side effect

[ Upstream commit 4468fcae49f08e88fbbffe05b29496192df89991 ]

This change moves update_total flag out of update_triggers function,
currently called only in psi_poll_work.
In the next patch, update_triggers will be called also in psi_avgs_work,
but the total update information is specific to psi_poll_work.
Returning update_total value to the caller let us avoid differentiating
the implementation of update_triggers for different aggregators.

Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20230330105418.77061-4-cerasuolodomenico@gmail.com
Stable-dep-of: aff037078eca ("sched/psi: use kernfs polling functions for PSI trigger polling")
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/psi: Rename existing poll members in preparation

[ Upstream commit 65457b74aa9437418e552e8d52d7112d4f9901a6 ]

Renaming in PSI implementation to make a clear distinction between
privileged and unprivileged triggers code to be implemented in the
next patch.

Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20230330105418.77061-3-cerasuolodomenico@gmail.com
Stable-dep-of: aff037078eca ("sched/psi: use kernfs polling functions for PSI trigger polling")
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/psi: Rearrange polling code in preparation

[ Upstream commit 7fab21fa0d000a0ea32d73ce8eec68557c6c268b ]

Move a few functions up in the file to avoid forward declaration needed
in the patch implementing unprivileged PSI triggers.

Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20230330105418.77061-2-cerasuolodomenico@gmail.com
Stable-dep-of: aff037078eca ("sched/psi: use kernfs polling functions for PSI trigger polling")
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/psi: Fix avgs_work re-arm in psi_avgs_work()

[ Upstream commit 2fcd7bbae90a6d844da8660a9d27079281dfbba2 ]

Pavan reported a problem that PSI avgs_work idle shutoff is not
working at all. Because PSI_NONIDLE condition would be observed in
psi_avgs_work()->collect_percpu_times()->get_recent_times() even if
only the kworker running avgs_work on the CPU.

Although commit 1b69ac6b40eb ("psi: fix aggregation idle shut-off")
avoided the ping-pong wake problem when the worker sleep, psi_avgs_work()
still will always re-arm the avgs_work, so shutoff is not working.

This patch changes to use PSI_STATE_RESCHEDULE to flag whether to
re-arm avgs_work in get_recent_times(). For the current CPU, we re-arm
avgs_work only when (NR_RUNNING > 1 || NR_IOWAIT > 0 || NR_MEMSTALL > 0),
for other CPUs we can just check PSI_NONIDLE delta. The new flag
is only used in psi_avgs_work(), so we check in get_recent_times()
that current_work() is avgs_work.

One potential problem is that the brief period of non-idle time
incurred between the aggregation run and the kworker's dequeue will
be stranded in the per-cpu buckets until avgs_work run next time.
The buckets can hold 4s worth of time, and future activity will wake
the avgs_work with a 2s delay, giving us 2s worth of data we can leave
behind when shut off the avgs_work. If the kworker run other works after
avgs_work shut off and doesn't have any scheduler activities for 2s,
this maybe a problem.

Reported-by: Pavan Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20221014110551.22695-1-zhouchengming@bytedance.com
Stable-dep-of: aff037078eca ("sched/psi: use kernfs polling functions for PSI trigger polling")
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/fair: Use recent_used_cpu to test p->cpus_ptr

[ Upstream commit ae2ad293d6be143ad223f5f947cca07bcbe42595 ]

When checking whether a recently used CPU can be a potential idle
candidate, recent_used_cpu should be used to test p->cpus_ptr as
p->recent_used_cpu is not equal to recent_used_cpu and candidate
decision is made based on recent_used_cpu here.

Fixes: 89aafd67f28c ("sched/fair: Use prev instead of new target as recent_used_cpu")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20230620080747.359122-1-linmiaohe@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: q6apm: do not close GPR port before closing graph

[ Upstream commit c1be62923d4d86e7c06b1224626e27eb8d9ab32e ]

Closing GPR port before graph close can result in un handled notifications
from DSP, this results in spam of errors from GPR driver as there is no
one to handle these notification at that point in time.

Fix this by closing GPR port after graph close is finished.

Fixes: 5477518b8a0e ("ASoC: qdsp6: audioreach: add q6apm support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705131842.41584-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: wcd938x: fix dB range for HPHL and HPHR

[ Upstream commit c03226ba15fe3c42d13907ec7d8536396602557b ]

dB range for HPHL and HPHR gains are from +6dB to -30dB in steps of
1.5dB with register values range from 0 to 24.

Current code maps these dB ranges incorrectly, fix them to allow proper
volume setting.

Fixes: e8ba1e05bdc0 ("ASoC: codecs: wcd938x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705125723.40464-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: wcd938x: fix mbhc impedance loglevel

[ Upstream commit e5ce198bd5c6923b6a51e1493b1401f84c24b26d ]

Demote the MBHC impedance measurement printk, which is not an error
message, from error to debug level.

While at it, fix the capitalisation of "ohm" and add the missing space
before the opening parenthesis.

Fixes: bcee7ed09b8e ("ASoC: codecs: wcd938x: add Multi Button Headset Control support")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230630142717.5314-2-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: amd: acp: fix for invalid dai id handling in acp_get_byte_count()

[ Upstream commit 85aeab362201cf52c34cd429e4f6c75a0b42f9a3 ]

For invalid dai id, instead of returning -EINVAL
return bytes count as zero in acp_get_byte_count() function.

Fixes: 623621a9f9e1 ("ASoC: amd: Add common framework to support I2S on ACP SOC")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230626105356.2580125-6-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix strncpy() not using dest-buf length as length issue

[ Upstream commit 1cf3d5567f273a8746d1bade00633a93204f80f0 ]

Now, strncpy() in hns3_dbg_fill_content() use src-length as copy-length,
it may result in dest-buf overflow.

This patch is to fix intel compile warning for csky-linux-gcc (GCC) 12.1.0
compiler.

The warning reports as below:

hclge_debugfs.c:92:25: warning: 'strncpy' specified bound depends on
the length of the source argument [-Wstringop-truncation]

strncpy(pos, items[i].name, strlen(items[i].name));

hclge_debugfs.c:90:25: warning: 'strncpy' output truncated before
terminating nul copying as many bytes from a string as its length
[-Wstringop-truncation]

strncpy(pos, result[i], strlen(result[i]));

strncpy() use src-length as copy-length, it may result in
dest-buf overflow.

So,this patch add some values check to avoid this issue.

Signed-off-by: Hao Chen <chenhao418@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/lkml/202207170606.7WtHs9yS-lkp@intel.com/T/
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igb: Fix igb_down hung on surprise removal

[ Upstream commit 004d25060c78fc31f66da0fa439c544dda1ac9d5 ]

In a setup where a Thunderbolt hub connects to Ethernet and a display
through USB Type-C, users may experience a hung task timeout when they
remove the cable between the PC and the Thunderbolt hub.
This is because the igb_down function is called multiple times when
the Thunderbolt hub is unplugged. For example, the igb_io_error_detected
triggers the first call, and the igb_remove triggers the second call.
The second call to igb_down will block at napi_synchronize.
Here's the call trace:
    __schedule+0x3b0/0xddb
    ? __mod_timer+0x164/0x5d3
    schedule+0x44/0xa8
    schedule_timeout+0xb2/0x2a4
    ? run_local_timers+0x4e/0x4e
    msleep+0x31/0x38
    igb_down+0x12c/0x22a [igb 6615058754948bfde0bf01429257eb59f13030d4]
    __igb_close+0x6f/0x9c [igb 6615058754948bfde0bf01429257eb59f13030d4]
    igb_close+0x23/0x2b [igb 6615058754948bfde0bf01429257eb59f13030d4]
    __dev_close_many+0x95/0xec
    dev_close_many+0x6e/0x103
    unregister_netdevice_many+0x105/0x5b1
    unregister_netdevice_queue+0xc2/0x10d
    unregister_netdev+0x1c/0x23
    igb_remove+0xa7/0x11c [igb 6615058754948bfde0bf01429257eb59f13030d4]
    pci_device_remove+0x3f/0x9c
    device_release_driver_internal+0xfe/0x1b4
    pci_stop_bus_device+0x5b/0x7f
    pci_stop_bus_device+0x30/0x7f
    pci_stop_bus_device+0x30/0x7f
    pci_stop_and_remove_bus_device+0x12/0x19
    pciehp_unconfigure_device+0x76/0xe9
    pciehp_disable_slot+0x6e/0x131
    pciehp_handle_presence_or_link_change+0x7a/0x3f7
    pciehp_ist+0xbe/0x194
    irq_thread_fn+0x22/0x4d
    ? irq_thread+0x1fd/0x1fd
    irq_thread+0x17b/0x1fd
    ? irq_forced_thread_fn+0x5f/0x5f
    kthread+0x142/0x153
    ? __irq_get_irqchip_state+0x46/0x46
    ? kthread_associate_blkcg+0x71/0x71
    ret_from_fork+0x1f/0x30

In this case, igb_io_error_detected detaches the network interface
and requests a PCIE slot reset, however, the PCIE reset callback is
not being invoked and thus the Ethernet connection breaks down.
As the PCIE error in this case is a non-fatal one, requesting a
slot reset can be avoided.
This patch fixes the task hung issue and preserves Ethernet
connection by ignoring non-fatal PCIE errors.

Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230620174732.4145155-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: pcie: add device id 51F1 for killer 1675

[ Upstream commit f4daceae4087bbb3e9a56044b44601d520d009d2 ]

Intel Killer AX1675i/s with device id 51f1 would show
"No config found for PCI dev 51f1/1672" in dmesg and refuse to work.
Add the new device id 51F1 for 1675i/s to fix the issue.

Signed-off-by: Yi Kuo <yi@yikuo.dev>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130444.ee224675380b.I921c905e21e8d041ad808def8f454f27b5ebcd8b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>