Graeme Russ [Sat, 12 Feb 2011 04:11:47 +0000 (15:11 +1100)]
eNET: Rearrange PAR assignments
Graeme Russ [Sat, 12 Feb 2011 04:11:45 +0000 (15:11 +1100)]
eNET: Define MMCR values in config.h
Graeme Russ [Sat, 12 Feb 2011 04:11:43 +0000 (15:11 +1100)]
eNET: Add RTC support to eNET
The SC520 has an inbuilt MC146818 - Enable it for the eNET board
Graeme Russ [Sat, 12 Feb 2011 04:11:41 +0000 (15:11 +1100)]
eNET: Fix eNET Interrupt Setup for Linux
Fix minor issues with the configuration of the hardware interrupts for
Linux when booting the eNET board
Graeme Russ [Sat, 12 Feb 2011 04:11:40 +0000 (15:11 +1100)]
sc520: Remove printf calls from cpu_init_f
In later patches, cpu_init_f will be called before console has been
initialised and printf will not be legitimately available
Graeme Russ [Sat, 12 Feb 2011 04:11:38 +0000 (15:11 +1100)]
sc520: Move board specific settings to board init function
Graeme Russ [Sat, 12 Feb 2011 04:11:36 +0000 (15:11 +1100)]
sc520: Define MMCR address in include file
Graeme Russ [Sat, 12 Feb 2011 04:11:35 +0000 (15:11 +1100)]
x86: Make cpu init functions weak
Graeme Russ [Sat, 12 Feb 2011 04:11:33 +0000 (15:11 +1100)]
x86: Call early_board_init when warm booting
early_board_init has been skipped to avoid SDRAM corruption in the case
that a fully relocatable image has been loaded into SDRAM and is being
executed from SDRAM. x86 is being aligned with other architectures (ARM
and PPC in particlar) and will be using Cache-As-RAM to run a C
environment from Flash (or SRAM if you have some). early_board_init may
be needed to assist in the setup of Cache-As-RAM and the early C
environment
Graeme Russ [Sat, 12 Feb 2011 04:11:32 +0000 (15:11 +1100)]
x86: Add processor flags header from linux
Graeme Russ [Sat, 12 Feb 2011 04:11:30 +0000 (15:11 +1100)]
x86: Move Global Descriptor Table defines to processor.h
Graeme Russ [Sat, 12 Feb 2011 04:11:28 +0000 (15:11 +1100)]
x86: Add stack dump to register dump
Graeme Russ [Sat, 12 Feb 2011 04:11:26 +0000 (15:11 +1100)]
x86: Fix mangled umlauts
git mergetool has a nasty habit of mangling umlats - fix ones that have
been missed in previous submissions
Graeme Russ [Sat, 12 Feb 2011 04:11:25 +0000 (15:11 +1100)]
sc520: Sort Makefile
Graeme Russ [Sat, 12 Feb 2011 04:11:24 +0000 (15:11 +1100)]
x86: Parametize values used in linker script
Graeme Russ [Sat, 12 Feb 2011 04:11:22 +0000 (15:11 +1100)]
eNET: Create distinct board configurations
Position independant functionality is due for removal from the x86
architecture, so create two distinct configurations - One for Flash and
one for SRAM
Graeme Russ [Sat, 12 Feb 2011 04:11:21 +0000 (15:11 +1100)]
x86: Align config.mk and linker scripts with other arches
Graeme Russ [Sat, 12 Feb 2011 04:11:21 +0000 (15:11 +1100)]
x86: Fix definition of global_data struct for asm-offsets.c
Wolfgang Denk [Fri, 11 Feb 2011 20:23:33 +0000 (21:23 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
York Sun [Thu, 10 Feb 2011 18:13:10 +0000 (10:13 -0800)]
powerpc/8xxx: Add additional cycle to write-to-read turnaound for DDR3
When DDR data rate is higher than 1200MT/s or controller interleaving is
enabled, additional cycle for write-to-read turnaround is needed to satisfy
dynamic ODT timing.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Priyanka Jain [Tue, 8 Feb 2011 07:47:56 +0000 (13:17 +0530)]
powerpc/85xx: corrected p1_p2_rdb EEPROM address
Board EEPROM is used to read/save Ethernet MAC addresses.
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 10 Feb 2011 05:36:24 +0000 (23:36 -0600)]
powerpc/85xx: Fix p1_p2_rdb boards.cfg
We should have been defining the actual board name in the options, not
the processor. Fix this for P1011RDB, P1020RDB, P2010RDB, and P2020RDB.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Timur Tabi [Wed, 9 Feb 2011 19:40:51 +0000 (13:40 -0600)]
fsl: update CRC after setting EEPROM identifier
The "mac id" command is used to initialize the EEPROM data to a specific
format, but it was not updating the CRC. This didn't cause any real
problems, because writing the data to the EEPROM will always update the
CRC anyway, but it did result in a bogus CRC warning.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Wolfgang Denk [Wed, 9 Feb 2011 14:11:10 +0000 (15:11 +0100)]
cmd_bmp.c: message about compressed formats is debug info only.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Wolfgang Denk [Wed, 9 Feb 2011 20:22:58 +0000 (21:22 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
Wolfgang Denk [Wed, 9 Feb 2011 19:54:53 +0000 (20:54 +0100)]
Merge branch 'next' of git://git.denx.de/u-boot-nios
Wolfgang Denk [Wed, 9 Feb 2011 19:50:26 +0000 (20:50 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Scott Wood [Tue, 8 Feb 2011 21:25:02 +0000 (15:25 -0600)]
NAND: env: remember the flags used in the previous environment
Previously, uninitialized stack space was being referenced.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Thomas Chou [Mon, 27 Dec 2010 02:46:01 +0000 (10:46 +0800)]
nios2: add gpio_is_valid
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
Thomas Chou [Mon, 27 Dec 2010 02:45:34 +0000 (10:45 +0800)]
nios2: use long for ssize_t
This is consistent with nios2-linux. And resolved the warning,
cmd_nvedit.c: In function `do_env_export':
cmd_nvedit.c:660: warning: size_t format, ssize_t arg (arg 3)
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
Thomas Chou [Mon, 27 Dec 2010 01:30:17 +0000 (09:30 +0800)]
altera_spi: add spi_set_speed
Added this for mmc_spi driver. Though altera spi core does not
support programmable speed. It is fixed when configured in
sopc-builder.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
Thomas Chou [Fri, 24 Dec 2010 07:19:44 +0000 (15:19 +0800)]
nios2: add gpio_free
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
Dirk Eibach [Fri, 21 Jan 2011 08:31:21 +0000 (09:31 +0100)]
ppc4xx: Add DLVision-10G board support
Board support for the Guntermann & Drunck DLVision-10G.
Adds support for multiple FPGAs per board for gdsys 405ep
architecture.
Adds support for dual link osd hardware for gdsys 405ep.
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Sun, 6 Feb 2011 21:41:53 +0000 (22:41 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
Wolfgang Denk [Sun, 6 Feb 2011 21:39:50 +0000 (22:39 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-usb
Wolfgang Denk [Sun, 6 Feb 2011 21:28:34 +0000 (22:28 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Joakim Tjernlund [Thu, 27 Jan 2011 15:30:54 +0000 (16:30 +0100)]
mpc83xx: Use correct register to calculate clocks.
Use SPMR instead of HRCWL when calculating clocks as HCRWL
may be changed and the CPU will not pick up all changes
until there is a POR. u-boot will think SPMF has changed and get
the clocks wrong.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Leo Liu [Wed, 19 Jan 2011 11:50:47 +0000 (19:50 +0800)]
mpc83xx: fix pcie configuration space read/write
This patch fix a problem for the pcie enumeration when the mpc83xx
pcie controller is connected with switch or we use both of the two
pcie controller.
Signed-off-by: Leo Liu <liucai.lfn@gmail.com>
fix codingstyle and compiler warning: 'pcie_priv' defined but not used
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Alexander Holler [Fri, 28 Jan 2011 11:42:13 +0000 (12:42 +0100)]
USB: Change the necessary defines to get debug output
While debugging some USB stuff, I've first missed that there are actually
two defines necessary to get usefull output. The one needed to get debug output
for the communication with HUBs was burried somewhere deep inside the code.
Change that so that a #define DEBUG is enough while still leaving the possibility
to reduce unwanted debug output.
Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Alexander Holler [Thu, 27 Jan 2011 21:50:07 +0000 (22:50 +0100)]
USB: Fix device stati for removable and powerctrl (typo)
I currently don't know if the error could have other consequences
than a wrong output when turning debug on.
Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Wolfgang Denk [Fri, 4 Feb 2011 20:44:46 +0000 (21:44 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
Kumar Gala [Fri, 4 Feb 2011 18:50:53 +0000 (12:50 -0600)]
powerpc/8xxx: Fix possible compile issue related to P1013
The P1013 is a single core version of P1022 and thus should use the
p1022_serdes.c code. It was acciently pointing to p1013_serdes.c which
doesn't exist.
Reported-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Wolfgang Denk [Fri, 4 Feb 2011 19:38:27 +0000 (20:38 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-sh
York Sun [Wed, 26 Jan 2011 05:51:29 +0000 (21:51 -0800)]
powerpc/85xx: Enable ECC on MPC8572DS
Using hwconfig to turn on/off ECC, without re-compiling.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
York Sun [Wed, 26 Jan 2011 06:05:49 +0000 (22:05 -0800)]
powerpc/mpc85xx: implement workaround for errata DDR111 and DDR134
Workaround for the following errata:
DDR111 - MCKE signal may not function correctly at assertion of HRESET
DDR134 - The automatic CAS-to-Preamble feature of the DDR controller can
calibrate to incorrect values
These two workarounds must be implemented together because they touch
common registers.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
York Sun [Wed, 26 Jan 2011 05:51:27 +0000 (21:51 -0800)]
powerpc/85xx: Rename MPC8572 DDR erratum to DDR115
Use unique erratum number instead of platform number.
Enable command that reports errata on MPC8572DS.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
York Sun [Wed, 26 Jan 2011 06:14:57 +0000 (00:14 -0600)]
powerpc/85xx: Enable Errata command on MPC8572DS
Also removed duplicate CONFIG_CMD_IRQ define.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
York Sun [Wed, 26 Jan 2011 05:51:26 +0000 (21:51 -0800)]
powerpc/85xx: Remove unnecessary polling loop from DDR init
This polling loop is not required normally, unless specifically stated in
workaround.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Sat, 29 Jan 2011 21:36:10 +0000 (15:36 -0600)]
fsl_esdhc: Add the workaround for erratum ESDHC-A001 (enable on P2020)
Data timeout counter (SYSCTL[DTOCV]) is not reliable for values of 4, 8,
and 12. Program one more than the desired value: 4 -> 5, 8 -> 9, 12 -> 13.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 26 Jan 2011 07:43:15 +0000 (01:43 -0600)]
powerpc/85xx: Enable ESDHC111 Erratum on P2010/P2020 SoCs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Nobuhiro Iwamatsu [Thu, 3 Feb 2011 07:27:45 +0000 (16:27 +0900)]
sh: sh7785lcr: Fix out of tree building
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Alexander Holler [Thu, 20 Jan 2011 01:17:48 +0000 (02:17 +0100)]
NAND: Fix saving of redundand environment
When redundand environments are used the serial needs
to get increased, otherwise the old one will still be used.
Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Wolfgang Denk [Wed, 2 Feb 2011 21:37:32 +0000 (22:37 +0100)]
Prepare v2011.03-rc1
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Wed, 2 Feb 2011 21:36:10 +0000 (22:36 +0100)]
Minor Coding Style Cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Wed, 2 Feb 2011 20:57:19 +0000 (21:57 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Alexander Holler [Tue, 18 Jan 2011 23:24:40 +0000 (00:24 +0100)]
Print compiler and linker version with the version command
After years of unsuccessful research I've finally shamelessly stolen other
peoples intellectual properties to present the all-new and world-changing
updated version command:
-
U-Boot>> version
U-Boot 2010.12-00014-g7435056-dirty (Jan 18 2011 - 23:19:38)
MyBoard
gcc (GCC) 0.42 (Distro foobar)
GNU ld (GNU Binutils) 0.
314159265
-
May the toolchain bugs rest in peace.
Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Yoshihiro Shimoda [Wed, 2 Feb 2011 01:05:39 +0000 (10:05 +0900)]
change email address in MAINTAINERS
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Yoshihiro Shimoda [Wed, 2 Feb 2011 01:05:39 +0000 (10:05 +0900)]
change email address in MAINTAINERS
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Yoshihiro Shimoda [Wed, 2 Feb 2011 01:05:36 +0000 (10:05 +0900)]
sh: add support for sh7757lcr board
The R0P7757LC0030RL board has SH7757, 256MB DDR3-SDRAM, SPI ROM,
Ethernet, and more.
This patch supports the following functions:
- 256MB DDR3-SDRAM
- SPI ROM
- Ethernet
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Yoshihiro Shimoda [Mon, 31 Jan 2011 07:50:43 +0000 (16:50 +0900)]
spi: add support SuperH SPI module
SH7757 has SPI module. This patch supports it.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Yoshihiro Shimoda [Thu, 27 Jan 2011 01:06:08 +0000 (10:06 +0900)]
net: sh_eth: add cache handling
Some CPU needs cache handling. So this patch add the config of
CONFIG_SH_ETHER_CACHE_WRITEBACK, and it calls wback function.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Yoshihiro Shimoda [Thu, 27 Jan 2011 01:06:03 +0000 (10:06 +0900)]
README: add description of sh_eth driver
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Yoshihiro Shimoda [Thu, 27 Jan 2011 01:06:14 +0000 (10:06 +0900)]
sh: add support the CONFIG_SYS_LDSCRIPT
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Mon, 17 Jan 2011 12:17:22 +0000 (21:17 +0900)]
sh: Remove config.mk for shmin board
Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Mon, 17 Jan 2011 12:15:44 +0000 (21:15 +0900)]
sh: Remove config.mk for espt board
Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Mon, 17 Jan 2011 12:13:49 +0000 (21:13 +0900)]
sh: Remove config.mk for mpr2 board
Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Mon, 17 Jan 2011 12:08:58 +0000 (21:08 +0900)]
sh: Remove config.mk for ms7750se board
Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Mon, 17 Jan 2011 12:07:15 +0000 (21:07 +0900)]
sh: Remove config.mk for ms7722se board
Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Mon, 17 Jan 2011 12:05:35 +0000 (21:05 +0900)]
sh: Remove config.mk for ms7720se board
Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Mon, 17 Jan 2011 12:02:16 +0000 (21:02 +0900)]
sh: Remove config.mk for sh7785lcr board
Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Mon, 17 Jan 2011 11:53:29 +0000 (20:53 +0900)]
sh: Remove config.mk for sh7763rdp board
Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Mon, 17 Jan 2011 11:51:55 +0000 (20:51 +0900)]
sh: Remove config.mk for rsk7203 board
Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Mon, 17 Jan 2011 11:50:26 +0000 (20:50 +0900)]
sh: Remove config.mk for r7780mp board
Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Mon, 17 Jan 2011 11:48:39 +0000 (20:48 +0900)]
sh: Remove config.mk for r2dplus board
Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Mon, 17 Jan 2011 11:46:35 +0000 (20:46 +0900)]
sh: Remove config.mk for ap325rxa board
Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Mon, 17 Jan 2011 11:43:40 +0000 (20:43 +0900)]
sh: Remove config.mk for MigoR board
Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Minkyu Kang [Mon, 24 Jan 2011 06:33:50 +0000 (15:33 +0900)]
armv7: add support for s5pc210 universal board
This patch adds support for Samsung s5pc210 universal board
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Mon, 24 Jan 2011 06:22:23 +0000 (15:22 +0900)]
armv7: add support for S5PC210 SoC
S5PC210 is a 32-bit RISC and Cortex-A9 Dual Core based micro-processor.
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Mon, 24 Jan 2011 05:43:25 +0000 (14:43 +0900)]
S5P: serial: Use the inline function instead of static value
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Po-Yu Chuang [Sun, 19 Dec 2010 23:07:23 +0000 (23:07 +0000)]
arm: a320evb: fixes for relocation support
* add CONFIG_SYS_SDRAM_BASE and CONFIG_SYS_INIT_SP_ADDR
* do not update gd->bd in dram_init() because bd is unavailable then
* move CONFIG_SYS_TEXT_BASE from config.mk to a320evb.h
* remove config.mk
Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Heiko Schocher [Thu, 20 Jan 2011 22:56:39 +0000 (22:56 +0000)]
arm926ejs: timer: Replace bss variable by gdr
Reuse the gd->tbl value for timestamp and add gd->lastinc for lastinc bss
values in the arm926ejs timers implementation.
The usage of bss values in drivers before initialisation of bss is forbidden.
In that special case some data in .rel.dyn gets corrupted.
This patch is similiar to the patch Dirk Behme posted
for the armv7/omap-common/timer.c and added suggestions
from Reinhard Meyer.
Tested on the arm926ejs mx27 based magnesium board
Tested on the arm926ejs kirkwood based suen3 board
Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Albert ARIBAUD <albert.aribaud@free.fr>
cc: Prafulla Wadaskar <prafulla@marvell.com>
cc: Stefano Babic <sbabic@denx.de>
cc: Reinhard Meyer <u-boot@emk-elektronik.de>
Jens Scharsig [Sat, 18 Dec 2010 02:08:07 +0000 (02:08 +0000)]
remove (double) LED initialization in arm920t start.s
* remove LED initialization in front of relocation and bss init
Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
Heiko Schocher [Thu, 9 Dec 2010 22:01:15 +0000 (22:01 +0000)]
arm1136: timer: Replace bss variable by gd
Reuse the gd->tbl value for timestamp and add gd->lastinc for lastinc bss
values in the arm1136 timer driver for mx31 and omap24xx
The usage of bss values in drivers before initialisation of bss is forbidden.
In that special case some data in .rel.dyn gets corrupted.
This patch is similiar to the patch Dirk Behme posted
for the armv7/omap-common/timer.c
Tested on the mx31 based qong board
Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Albert ARIBAUD <albert.aribaud@free.fr>
Acked-by: Albert ARIBAUD <albert.aribaud@free.fr>
Liu Hui-R64343 [Wed, 22 Dec 2010 18:35:04 +0000 (18:35 +0000)]
ARM: */start.S: code cleanup
Remove the useless code from start.S
Signed-off-by: Jason Liu <r64343@freescale.com>
Tested-by: Andreas Bießmann <andreas.devel@googlemail.com>
Alexander Holler [Sun, 9 Jan 2011 12:19:44 +0000 (12:19 +0000)]
ARM: Avoid compiler optimization for readb, writeb and friends.
gcc 4.5.1 seems to ignore (at least some) volatile definitions,
avoid that as done in the kernel.
Reading C99 6.7.3 8 and the comment 114) there, I think it is a bug of that
gcc version to ignore the volatile type qualifier used e.g. in __arch_getl().
Anyway, using a definition as in the kernel headers avoids such optimizations when
gcc 4.5.1 is used.
Maybe the headers as used in the current linux-kernel should be used,
but to avoid large changes, I've just added a small change to the current headers.
Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Alessandro Rubini <rubini-list@gnudd.com>
Tested-by: Thomas Weber <weber@corscience.de>
Acked-by: Alexander Holler <holler@ahsoftware.de>
Tested-by: Alexander Holler <holler@ahsoftware.de>
Minkyu Kang [Mon, 27 Dec 2010 06:55:48 +0000 (15:55 +0900)]
armv7: s5pc1xx: don't use function pointer for clock functions
Because of the bss area is cleared after relocation, we've lost pointers.
This patch fixed it.
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Sandeep Paulraj [Wed, 29 Dec 2010 21:09:27 +0000 (16:09 -0500)]
DaVinci: Remove incorrect CONFIG option
The option CONFIG_SOC_DM6447 seems to have ended up
in the code by mistake. It is not used anywhere and
there is no chip called DM6447.
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sandeep Paulraj [Wed, 29 Dec 2010 19:42:56 +0000 (14:42 -0500)]
DaVinci Sonata: Fix Build Error
Fix a build error in the DaVinci Sonata Board
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sandeep Paulraj [Wed, 29 Dec 2010 19:31:26 +0000 (14:31 -0500)]
DaVinci DM6467: Fix Build Error
This commit fixes build errors on the DM6467 port.
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sandeep Paulraj [Tue, 28 Dec 2010 22:38:22 +0000 (17:38 -0500)]
DaVinci DM6467: Enhance board Support
Support for DM6467 was incomplete and the build failed
as well. Patches were sent to the list but have not been
added. This enhances the DM6467 support.
Some more patches will need to be sent to bring
it in line with what is available in internal TI
trees
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sandeep Paulraj [Tue, 28 Dec 2010 21:42:57 +0000 (16:42 -0500)]
ARM: Update mach types
This commit updates the mach-types for ARM
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sandeep Paulraj [Tue, 28 Dec 2010 20:43:16 +0000 (15:43 -0500)]
DaVinci DM6467: Added ET1011C (LSI) PHY support
Added arch/arm/cpu/arm926ejs/davinci/et1011c.c for handling
ET1011C gigabit phy. which overrides get_link_speed function
from default implementation. This enables output of 125 MHz
reference clock on SYS_CLK pin.
Signed-off-by: Prakash PM <prakash.pm@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sandeep Paulraj [Tue, 28 Dec 2010 19:42:27 +0000 (14:42 -0500)]
DaVinci EMAC: Add name to Ethernet device
Adds "DaVinci-EMAC" as the name of the device so that
it gets printed as "Using DaVinci-EMAC device"
during network access (dhcp, tftp) instead of empty name
in "Using" statement.This name also gets
reflected in 'ethact' env variable.
Signed-off-by: Hemant Pedanekar <hemantp@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sandeep Paulraj [Tue, 28 Dec 2010 19:37:33 +0000 (14:37 -0500)]
DaVinci EMAC: Fix davinci_eth_gigabit_enable
Enabling the gigabit was overwriting the
previous configuration by setting up only GIGAFORCE and
GIG bits of MAC control register.
Modified to retain previous configuration while
gigabit enabling.
Signed-off-by: Prakash PM <prakash.pm@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sandeep Paulraj [Tue, 28 Dec 2010 19:28:51 +0000 (14:28 -0500)]
DM365: Fix Build Error
After the merger of the next branch, the DM365 was
broken. A function used only by DA8xx based SOCs was
being incorrectly called. So fix it.
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sandeep Paulraj [Sat, 18 Dec 2010 23:15:25 +0000 (18:15 -0500)]
DaVinci DM365: Adding MMC/SD support for DM365 EVM
The patch adds support for MMC/SD in the DM365 EVM
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sandeep Paulraj [Sat, 18 Dec 2010 23:14:49 +0000 (18:14 -0500)]
DaVinci DM355: Adding MMC/SD support for DM355 EVM
The patch adds support for MMC/SD in the DM355 EVM
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sandeep Paulraj [Tue, 21 Dec 2010 01:01:21 +0000 (20:01 -0500)]
Davinci MMCSD Support
Added support for MMC/SD cards for Davinci. This feature is enabled by
CONFIG_DAVINCI_MMC and is dependant on CONFIG_MMC and CONFIG_GENERIC_MMC
options. This is tested on DM355 and DM365 EVMs with both the available mmc
controllers.
Signed-off-by: Alagu Sankar <alagusankar@embwise.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Mike Rapoport [Sat, 18 Dec 2010 22:43:19 +0000 (17:43 -0500)]
OMAP3: add CM-T35 board
This patch adds support for CM-T35 board
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Stefano Babic [Thu, 27 Jan 2011 06:03:49 +0000 (06:03 +0000)]
ARM: fix broken build of ARM
Commit
8aba9dceebb14144e07d19593111ee3a999c37fc breaks
ARM boards because for ARM the -pie option is used
for partial linking together with -r option.
The patch adds the -pie option to link u-boot.bin only.
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Jason Liu <liu.h.jason@gmail.com>
CC: lool@dooz.org
CC: Wolfgang Denk <wd@denx.de>
CC: Albert Aribaud <albert.aribaud@free.fr>
Tested-by: Alexander Holler <holler@ahsoftware.de>