platform/kernel/linux-rpi.git
2 years agoACPI/APEI: Limit printable size of BERT table data
Darren Hart [Tue, 8 Mar 2022 18:50:48 +0000 (10:50 -0800)]
ACPI/APEI: Limit printable size of BERT table data

[ Upstream commit 3f8dec116210ca649163574ed5f8df1e3b837d07 ]

Platforms with large BERT table data can trigger soft lockup errors
while attempting to print the entire BERT table data to the console at
boot:

  watchdog: BUG: soft lockup - CPU#160 stuck for 23s! [swapper/0:1]

Observed on Ampere Altra systems with a single BERT record of ~250KB.

The original bert driver appears to have assumed relatively small table
data. Since it is impractical to reassemble large table data from
interwoven console messages, and the table data is available in

  /sys/firmware/acpi/tables/data/BERT

limit the size for tables printed to the console to 1024 (for no reason
other than it seemed like a good place to kick off the discussion, would
appreciate feedback from existing users in terms of what size would
maintain their current usage model).

Alternatively, we could make printing a CONFIG option, use the
bert_disable boot arg (or something similar), or use a debug log level.
However, all those solutions require extra steps or change the existing
behavior for small table data. Limiting the size preserves existing
behavior on existing platforms with small table data, and eliminates the
soft lockups for platforms with large table data, while still making it
available.

Signed-off-by: Darren Hart <darren@os.amperecomputing.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoRevert "Revert "block, bfq: honor already-setup queue merges""
Paolo Valente [Thu, 25 Nov 2021 18:15:10 +0000 (19:15 +0100)]
Revert "Revert "block, bfq: honor already-setup queue merges""

[ Upstream commit 15729ff8143f8135b03988a100a19e66d7cb7ecd ]

A crash [1] happened to be triggered in conjunction with commit
2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The
latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq:
honor already-setup queue merges""). Yet, the reverted commit was not
the one introducing the bug. In fact, it actually triggered a UAF
introduced by a different commit, and now fixed by commit d29bd41428cf
("block, bfq: reset last_bfqq_created on group change").

So, there is no point in keeping commit 2d52c58b9c9b ("block, bfq:
honor already-setup queue merges") out. This commit restores it.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=214503

Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20211125181510.15004-1-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agolib/raid6/test/Makefile: Use $(pound) instead of \# for Make 4.3
Paul Menzel [Tue, 8 Feb 2022 15:21:48 +0000 (16:21 +0100)]
lib/raid6/test/Makefile: Use $(pound) instead of \# for Make 4.3

[ Upstream commit 633174a7046ec3b4572bec24ef98e6ee89bce14b ]

Buidling raid6test on Ubuntu 21.10 (ppc64le) with GNU Make 4.3 shows the
errors below:

    $ cd lib/raid6/test/
    $ make
    <stdin>:1:1: error: stray ‘\’ in program
    <stdin>:1:2: error: stray ‘#’ in program
    <stdin>:1:11: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ \
        before ‘<’ token

    [...]

The errors come from the HAS_ALTIVEC test, which fails, and the POWER
optimized versions are not built. That’s also reason nobody noticed on the
other architectures.

GNU Make 4.3 does not remove the backslash anymore. From the 4.3 release
announcment:

> * WARNING: Backward-incompatibility!
>   Number signs (#) appearing inside a macro reference or function invocation
>   no longer introduce comments and should not be escaped with backslashes:
>   thus a call such as:
>     foo := $(shell echo '#')
>   is legal.  Previously the number sign needed to be escaped, for example:
>     foo := $(shell echo '\#')
>   Now this latter will resolve to "\#".  If you want to write makefiles
>   portable to both versions, assign the number sign to a variable:
>     H := \#
>     foo := $(shell echo '$H')
>   This was claimed to be fixed in 3.81, but wasn't, for some reason.
>   To detect this change search for 'nocomment' in the .FEATURES variable.

So, do the same as commit 9564a8cf422d ("Kbuild: fix # escaping in .cmd
files for future Make") and commit 929bef467771 ("bpf: Use $(pound) instead
of \# in Makefiles") and define and use a $(pound) variable.

Reference for the change in make:
https://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57

Cc: Matt Brown <matthew.brown.dev@gmail.com>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoACPICA: Avoid walking the ACPI Namespace if it is not there
Rafael J. Wysocki [Mon, 7 Mar 2022 19:28:26 +0000 (20:28 +0100)]
ACPICA: Avoid walking the ACPI Namespace if it is not there

[ Upstream commit 0c9992315e738e7d6e927ef36839a466b080dba6 ]

ACPICA commit b1c3656ef4950098e530be68d4b589584f06cddc

Prevent acpi_ns_walk_namespace() from crashing when called with
start_node equal to ACPI_ROOT_OBJECT if the Namespace has not been
instantiated yet and acpi_gbl_root_node is NULL.

For instance, this can happen if the kernel is run with "acpi=off"
in the command line.

Link: https://github.com/acpica/acpica/commit/b1c3656ef4950098e530be68d4b589584f06cddc
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0hJWW_vZ3wwajE7xT38aWjY7cZyvqMJpXHzUL98-SiCVQ@mail.gmail.com/
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agobfq: fix use-after-free in bfq_dispatch_request
Zhang Wensheng [Thu, 3 Mar 2022 07:03:34 +0000 (15:03 +0800)]
bfq: fix use-after-free in bfq_dispatch_request

[ Upstream commit ab552fcb17cc9e4afe0e4ac4df95fc7b30e8490a ]

KASAN reports a use-after-free report when doing normal scsi-mq test

[69832.239032] ==================================================================
[69832.241810] BUG: KASAN: use-after-free in bfq_dispatch_request+0x1045/0x44b0
[69832.243267] Read of size 8 at addr ffff88802622ba88 by task kworker/3:1H/155
[69832.244656]
[69832.245007] CPU: 3 PID: 155 Comm: kworker/3:1H Not tainted 5.10.0-10295-g576c6382529e #8
[69832.246626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[69832.249069] Workqueue: kblockd blk_mq_run_work_fn
[69832.250022] Call Trace:
[69832.250541]  dump_stack+0x9b/0xce
[69832.251232]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.252243]  print_address_description.constprop.6+0x3e/0x60
[69832.253381]  ? __cpuidle_text_end+0x5/0x5
[69832.254211]  ? vprintk_func+0x6b/0x120
[69832.254994]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.255952]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.256914]  kasan_report.cold.9+0x22/0x3a
[69832.257753]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.258755]  check_memory_region+0x1c1/0x1e0
[69832.260248]  bfq_dispatch_request+0x1045/0x44b0
[69832.261181]  ? bfq_bfqq_expire+0x2440/0x2440
[69832.262032]  ? blk_mq_delay_run_hw_queues+0xf9/0x170
[69832.263022]  __blk_mq_do_dispatch_sched+0x52f/0x830
[69832.264011]  ? blk_mq_sched_request_inserted+0x100/0x100
[69832.265101]  __blk_mq_sched_dispatch_requests+0x398/0x4f0
[69832.266206]  ? blk_mq_do_dispatch_ctx+0x570/0x570
[69832.267147]  ? __switch_to+0x5f4/0xee0
[69832.267898]  blk_mq_sched_dispatch_requests+0xdf/0x140
[69832.268946]  __blk_mq_run_hw_queue+0xc0/0x270
[69832.269840]  blk_mq_run_work_fn+0x51/0x60
[69832.278170]  process_one_work+0x6d4/0xfe0
[69832.278984]  worker_thread+0x91/0xc80
[69832.279726]  ? __kthread_parkme+0xb0/0x110
[69832.280554]  ? process_one_work+0xfe0/0xfe0
[69832.281414]  kthread+0x32d/0x3f0
[69832.282082]  ? kthread_park+0x170/0x170
[69832.282849]  ret_from_fork+0x1f/0x30
[69832.283573]
[69832.283886] Allocated by task 7725:
[69832.284599]  kasan_save_stack+0x19/0x40
[69832.285385]  __kasan_kmalloc.constprop.2+0xc1/0xd0
[69832.286350]  kmem_cache_alloc_node+0x13f/0x460
[69832.287237]  bfq_get_queue+0x3d4/0x1140
[69832.287993]  bfq_get_bfqq_handle_split+0x103/0x510
[69832.289015]  bfq_init_rq+0x337/0x2d50
[69832.289749]  bfq_insert_requests+0x304/0x4e10
[69832.290634]  blk_mq_sched_insert_requests+0x13e/0x390
[69832.291629]  blk_mq_flush_plug_list+0x4b4/0x760
[69832.292538]  blk_flush_plug_list+0x2c5/0x480
[69832.293392]  io_schedule_prepare+0xb2/0xd0
[69832.294209]  io_schedule_timeout+0x13/0x80
[69832.295014]  wait_for_common_io.constprop.1+0x13c/0x270
[69832.296137]  submit_bio_wait+0x103/0x1a0
[69832.296932]  blkdev_issue_discard+0xe6/0x160
[69832.297794]  blk_ioctl_discard+0x219/0x290
[69832.298614]  blkdev_common_ioctl+0x50a/0x1750
[69832.304715]  blkdev_ioctl+0x470/0x600
[69832.305474]  block_ioctl+0xde/0x120
[69832.306232]  vfs_ioctl+0x6c/0xc0
[69832.306877]  __se_sys_ioctl+0x90/0xa0
[69832.307629]  do_syscall_64+0x2d/0x40
[69832.308362]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[69832.309382]
[69832.309701] Freed by task 155:
[69832.310328]  kasan_save_stack+0x19/0x40
[69832.311121]  kasan_set_track+0x1c/0x30
[69832.311868]  kasan_set_free_info+0x1b/0x30
[69832.312699]  __kasan_slab_free+0x111/0x160
[69832.313524]  kmem_cache_free+0x94/0x460
[69832.314367]  bfq_put_queue+0x582/0x940
[69832.315112]  __bfq_bfqd_reset_in_service+0x166/0x1d0
[69832.317275]  bfq_bfqq_expire+0xb27/0x2440
[69832.318084]  bfq_dispatch_request+0x697/0x44b0
[69832.318991]  __blk_mq_do_dispatch_sched+0x52f/0x830
[69832.319984]  __blk_mq_sched_dispatch_requests+0x398/0x4f0
[69832.321087]  blk_mq_sched_dispatch_requests+0xdf/0x140
[69832.322225]  __blk_mq_run_hw_queue+0xc0/0x270
[69832.323114]  blk_mq_run_work_fn+0x51/0x60
[69832.323942]  process_one_work+0x6d4/0xfe0
[69832.324772]  worker_thread+0x91/0xc80
[69832.325518]  kthread+0x32d/0x3f0
[69832.326205]  ret_from_fork+0x1f/0x30
[69832.326932]
[69832.338297] The buggy address belongs to the object at ffff88802622b968
[69832.338297]  which belongs to the cache bfq_queue of size 512
[69832.340766] The buggy address is located 288 bytes inside of
[69832.340766]  512-byte region [ffff88802622b968ffff88802622bb68)
[69832.343091] The buggy address belongs to the page:
[69832.344097] page:ffffea0000988a00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802622a528 pfn:0x26228
[69832.346214] head:ffffea0000988a00 order:2 compound_mapcount:0 compound_pincount:0
[69832.347719] flags: 0x1fffff80010200(slab|head)
[69832.348625] raw: 001fffff80010200 ffffea0000dbac08 ffff888017a57650 ffff8880179fe840
[69832.354972] raw: ffff88802622a528 0000000000120008 00000001ffffffff 0000000000000000
[69832.356547] page dumped because: kasan: bad access detected
[69832.357652]
[69832.357970] Memory state around the buggy address:
[69832.358926]  ffff88802622b980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.360358]  ffff88802622ba00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.361810] >ffff88802622ba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.363273]                       ^
[69832.363975]  ffff88802622bb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
[69832.375960]  ffff88802622bb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[69832.377405] ==================================================================

In bfq_dispatch_requestfunction, it may have function call:

bfq_dispatch_request
__bfq_dispatch_request
bfq_select_queue
bfq_bfqq_expire
__bfq_bfqd_reset_in_service
bfq_put_queue
kmem_cache_free
In this function call, in_serv_queue has beed expired and meet the
conditions to free. In the function bfq_dispatch_request, the address
of in_serv_queue pointing to has been released. For getting the value
of idle_timer_disabled, it will get flags value from the address which
in_serv_queue pointing to, then the problem of use-after-free happens;

Fix the problem by check in_serv_queue == bfqd->in_service_queue, to
get the value of idle_timer_disabled if in_serve_queue is equel to
bfqd->in_service_queue. If the space of in_serv_queue pointing has
been released, this judge will aviod use-after-free problem.
And if in_serv_queue may be expired or finished, the idle_timer_disabled
will be false which would not give effects to bfq_update_dispatch_stats.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com>
Link: https://lore.kernel.org/r/20220303070334.3020168-1-zhangwensheng5@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agofs/binfmt_elf: Fix AT_PHDR for unusual ELF files
Akira Kawata [Thu, 27 Jan 2022 12:40:16 +0000 (21:40 +0900)]
fs/binfmt_elf: Fix AT_PHDR for unusual ELF files

[ Upstream commit 0da1d5002745cdc721bc018b582a8a9704d56c42 ]

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197921
As pointed out in the discussion of buglink, we cannot calculate AT_PHDR
as the sum of load_addr and exec->e_phoff.

: The AT_PHDR of ELF auxiliary vectors should point to the memory address
: of program header. But binfmt_elf.c calculates this address as follows:
:
: NEW_AUX_ENT(AT_PHDR, load_addr + exec->e_phoff);
:
: which is wrong since e_phoff is the file offset of program header and
: load_addr is the memory base address from PT_LOAD entry.
:
: The ld.so uses AT_PHDR as the memory address of program header. In normal
: case, since the e_phoff is usually 64 and in the first PT_LOAD region, it
: is the correct program header address.
:
: But if the address of program header isn't equal to the first PT_LOAD
: address + e_phoff (e.g.  Put the program header in other non-consecutive
: PT_LOAD region), ld.so will try to read program header from wrong address
: then crash or use incorrect program header.

This is because exec->e_phoff
is the offset of PHDRs in the file and the address of PHDRs in the
memory may differ from it. This patch fixes the bug by calculating the
address of program headers from PT_LOADs directly.

Signed-off-by: Akira Kawata <akirakawata1@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220127124014.338760-2-akirakawata1@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoirqchip/nvic: Release nvic_base upon failure
Souptick Joarder (HPE) [Fri, 18 Feb 2022 16:33:03 +0000 (22:03 +0530)]
irqchip/nvic: Release nvic_base upon failure

[ Upstream commit e414c25e3399b2b3d7337dc47abccab5c71b7c8f ]

smatch warning was reported as below ->

smatch warnings:
drivers/irqchip/irq-nvic.c:131 nvic_of_init()
warn: 'nvic_base' not released on lines: 97.

Release nvic_base upon failure.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220218163303.33344-1-jrdr.linux@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoirqchip/qcom-pdc: Fix broken locking
Marc Zyngier [Thu, 24 Feb 2022 10:12:25 +0000 (10:12 +0000)]
irqchip/qcom-pdc: Fix broken locking

[ Upstream commit a6aca2f460e203781dc41391913cc5b54f4bc0ce ]

pdc_enable_intr() serves as a primitive to qcom_pdc_gic_{en,dis}able,
and has a raw spinlock for mutual exclusion, which is uses with
interruptible primitives.

This means that this critical section can itself be interrupted.
Should the interrupt also be a PDC interrupt, and the endpoint driver
perform an irq_disable() on that interrupt, we end-up in a deadlock.

Fix this by using the irqsave/irqrestore variants of the locking
primitives.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Maulik Shah <quic_mkshah@quicinc.com>
Link: https://lore.kernel.org/r/20220224101226.88373-5-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoFix incorrect type in assignment of ipv6 port for audit
Casey Schaufler [Mon, 28 Feb 2022 23:45:32 +0000 (15:45 -0800)]
Fix incorrect type in assignment of ipv6 port for audit

[ Upstream commit a5cd1ab7ab679d252a6d2f483eee7d45ebf2040c ]

Remove inappropriate use of ntohs() and assign the
port value directly.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoloop: use sysfs_emit() in the sysfs xxx show()
Chaitanya Kulkarni [Tue, 15 Feb 2022 21:33:07 +0000 (13:33 -0800)]
loop: use sysfs_emit() in the sysfs xxx show()

[ Upstream commit b27824d31f09ea7b4a6ba2c1b18bd328df3e8bed ]

sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for outputting sysfs content and it's possible to overrun the
PAGE_SIZE buffer length.

Use a generic sysfs_emit function that knows the size of the
temporary buffer and ensures that no overrun is done for offset
attribute in
loop_attr_[offset|sizelimit|autoclear|partscan|dio]_show() callbacks.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20220215213310.7264-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoselinux: allow FIOCLEX and FIONCLEX with policy capability
Richard Haines [Fri, 25 Feb 2022 17:54:38 +0000 (17:54 +0000)]
selinux: allow FIOCLEX and FIONCLEX with policy capability

[ Upstream commit 65881e1db4e948614d9eb195b8e1197339822949 ]

These ioctls are equivalent to fcntl(fd, F_SETFD, flags), which SELinux
always allows too.  Furthermore, a failed FIOCLEX could result in a file
descriptor being leaked to a process that should not have access to it.

As this patch removes access controls, a policy capability needs to be
enabled in policy to always allow these ioctls.

Based-on-patch-by: Demi Marie Obenour <demiobenour@gmail.com>
Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoarm64: module: remove (NOLOAD) from linker script
Fangrui Song [Fri, 18 Feb 2022 08:12:09 +0000 (00:12 -0800)]
arm64: module: remove (NOLOAD) from linker script

[ Upstream commit 4013e26670c590944abdab56c4fa797527b74325 ]

On ELF, (NOLOAD) sets the section type to SHT_NOBITS[1]. It is conceptually
inappropriate for .plt and .text.* sections which are always
SHT_PROGBITS.

In GNU ld, if PLT entries are needed, .plt will be SHT_PROGBITS anyway
and (NOLOAD) will be essentially ignored. In ld.lld, since
https://reviews.llvm.org/D118840 ("[ELF] Support (TYPE=<value>) to
customize the output section type"), ld.lld will report a `section type
mismatch` error. Just remove (NOLOAD) to fix the error.

[1] https://lld.llvm.org/ELF/linker_script.html As of today, "The
section should be marked as not loadable" on
https://sourceware.org/binutils/docs/ld/Output-Section-Type.html is
outdated for ELF.

Tested-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Fangrui Song <maskray@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220218081209.354383-1-maskray@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoselinux: use correct type for context length
Christian Göttsche [Thu, 17 Feb 2022 14:21:25 +0000 (15:21 +0100)]
selinux: use correct type for context length

[ Upstream commit b97df7c098c531010e445da88d02b7bf7bf59ef6 ]

security_sid_to_context() expects a pointer to an u32 as the address
where to store the length of the computed context.

Reported by sparse:

    security/selinux/xfrm.c:359:39: warning: incorrect type in arg 4
                                    (different signedness)
    security/selinux/xfrm.c:359:39:    expected unsigned int
                                       [usertype] *scontext_len
    security/selinux/xfrm.c:359:39:    got int *

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: wrapped commit description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoblock, bfq: don't move oom_bfqq
Yu Kuai [Sat, 29 Jan 2022 01:59:24 +0000 (09:59 +0800)]
block, bfq: don't move oom_bfqq

[ Upstream commit 8410f70977734f21b8ed45c37e925d311dfda2e7 ]

Our test report a UAF:

[ 2073.019181] ==================================================================
[ 2073.019188] BUG: KASAN: use-after-free in __bfq_put_async_bfqq+0xa0/0x168
[ 2073.019191] Write of size 8 at addr ffff8000ccf64128 by task rmmod/72584
[ 2073.019192]
[ 2073.019196] CPU: 0 PID: 72584 Comm: rmmod Kdump: loaded Not tainted 4.19.90-yk #5
[ 2073.019198] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 2073.019200] Call trace:
[ 2073.019203]  dump_backtrace+0x0/0x310
[ 2073.019206]  show_stack+0x28/0x38
[ 2073.019210]  dump_stack+0xec/0x15c
[ 2073.019216]  print_address_description+0x68/0x2d0
[ 2073.019220]  kasan_report+0x238/0x2f0
[ 2073.019224]  __asan_store8+0x88/0xb0
[ 2073.019229]  __bfq_put_async_bfqq+0xa0/0x168
[ 2073.019233]  bfq_put_async_queues+0xbc/0x208
[ 2073.019236]  bfq_pd_offline+0x178/0x238
[ 2073.019240]  blkcg_deactivate_policy+0x1f0/0x420
[ 2073.019244]  bfq_exit_queue+0x128/0x178
[ 2073.019249]  blk_mq_exit_sched+0x12c/0x160
[ 2073.019252]  elevator_exit+0xc8/0xd0
[ 2073.019256]  blk_exit_queue+0x50/0x88
[ 2073.019259]  blk_cleanup_queue+0x228/0x3d8
[ 2073.019267]  null_del_dev+0xfc/0x1e0 [null_blk]
[ 2073.019274]  null_exit+0x90/0x114 [null_blk]
[ 2073.019278]  __arm64_sys_delete_module+0x358/0x5a0
[ 2073.019282]  el0_svc_common+0xc8/0x320
[ 2073.019287]  el0_svc_handler+0xf8/0x160
[ 2073.019290]  el0_svc+0x10/0x218
[ 2073.019291]
[ 2073.019294] Allocated by task 14163:
[ 2073.019301]  kasan_kmalloc+0xe0/0x190
[ 2073.019305]  kmem_cache_alloc_node_trace+0x1cc/0x418
[ 2073.019308]  bfq_pd_alloc+0x54/0x118
[ 2073.019313]  blkcg_activate_policy+0x250/0x460
[ 2073.019317]  bfq_create_group_hierarchy+0x38/0x110
[ 2073.019321]  bfq_init_queue+0x6d0/0x948
[ 2073.019325]  blk_mq_init_sched+0x1d8/0x390
[ 2073.019330]  elevator_switch_mq+0x88/0x170
[ 2073.019334]  elevator_switch+0x140/0x270
[ 2073.019338]  elv_iosched_store+0x1a4/0x2a0
[ 2073.019342]  queue_attr_store+0x90/0xe0
[ 2073.019348]  sysfs_kf_write+0xa8/0xe8
[ 2073.019351]  kernfs_fop_write+0x1f8/0x378
[ 2073.019359]  __vfs_write+0xe0/0x360
[ 2073.019363]  vfs_write+0xf0/0x270
[ 2073.019367]  ksys_write+0xdc/0x1b8
[ 2073.019371]  __arm64_sys_write+0x50/0x60
[ 2073.019375]  el0_svc_common+0xc8/0x320
[ 2073.019380]  el0_svc_handler+0xf8/0x160
[ 2073.019383]  el0_svc+0x10/0x218
[ 2073.019385]
[ 2073.019387] Freed by task 72584:
[ 2073.019391]  __kasan_slab_free+0x120/0x228
[ 2073.019394]  kasan_slab_free+0x10/0x18
[ 2073.019397]  kfree+0x94/0x368
[ 2073.019400]  bfqg_put+0x64/0xb0
[ 2073.019404]  bfqg_and_blkg_put+0x90/0xb0
[ 2073.019408]  bfq_put_queue+0x220/0x228
[ 2073.019413]  __bfq_put_async_bfqq+0x98/0x168
[ 2073.019416]  bfq_put_async_queues+0xbc/0x208
[ 2073.019420]  bfq_pd_offline+0x178/0x238
[ 2073.019424]  blkcg_deactivate_policy+0x1f0/0x420
[ 2073.019429]  bfq_exit_queue+0x128/0x178
[ 2073.019433]  blk_mq_exit_sched+0x12c/0x160
[ 2073.019437]  elevator_exit+0xc8/0xd0
[ 2073.019440]  blk_exit_queue+0x50/0x88
[ 2073.019443]  blk_cleanup_queue+0x228/0x3d8
[ 2073.019451]  null_del_dev+0xfc/0x1e0 [null_blk]
[ 2073.019459]  null_exit+0x90/0x114 [null_blk]
[ 2073.019462]  __arm64_sys_delete_module+0x358/0x5a0
[ 2073.019467]  el0_svc_common+0xc8/0x320
[ 2073.019471]  el0_svc_handler+0xf8/0x160
[ 2073.019474]  el0_svc+0x10/0x218
[ 2073.019475]
[ 2073.019479] The buggy address belongs to the object at ffff8000ccf63f00
 which belongs to the cache kmalloc-1024 of size 1024
[ 2073.019484] The buggy address is located 552 bytes inside of
 1024-byte region [ffff8000ccf63f00ffff8000ccf64300)
[ 2073.019486] The buggy address belongs to the page:
[ 2073.019492] page:ffff7e000333d800 count:1 mapcount:0 mapping:ffff8000c0003a00 index:0x0 compound_mapcount: 0
[ 2073.020123] flags: 0x7ffff0000008100(slab|head)
[ 2073.020403] raw: 07ffff0000008100 ffff7e0003334c08 ffff7e00001f5a08 ffff8000c0003a00
[ 2073.020409] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000
[ 2073.020411] page dumped because: kasan: bad access detected
[ 2073.020412]
[ 2073.020414] Memory state around the buggy address:
[ 2073.020420]  ffff8000ccf64000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020424]  ffff8000ccf64080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020428] >ffff8000ccf64100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020430]                                   ^
[ 2073.020434]  ffff8000ccf64180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020438]  ffff8000ccf64200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020439] ==================================================================

The same problem exist in mainline as well.

This is because oom_bfqq is moved to a non-root group, thus root_group
is freed earlier.

Thus fix the problem by don't move oom_bfqq.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20220129015924.3958918-4-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agocrypto: hisilicon/sec - not need to enable sm4 extra mode at HW V3
Kai Ye [Fri, 11 Feb 2022 09:08:18 +0000 (17:08 +0800)]
crypto: hisilicon/sec - not need to enable sm4 extra mode at HW V3

[ Upstream commit f8a2652826444d13181061840b96a5d975d5b6c6 ]

It is not need to enable sm4 extra mode in at HW V3. Here is fix it.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agocrypto: xts - Add softdep on ecb
Herbert Xu [Thu, 10 Feb 2022 02:09:40 +0000 (13:09 +1100)]
crypto: xts - Add softdep on ecb

[ Upstream commit dfe085d8dcd0bb1fe20cc2327e81c8064cead441 ]

The xts module needs ecb to be present as it's meant to work
on top of ecb.  This patch adds a softdep so ecb can be included
automatically into the initramfs.

Reported-by: rftc <rftc@gmx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoblock/bfq_wf2q: correct weight to ioprio
Yahu Gao [Fri, 7 Jan 2022 06:58:59 +0000 (14:58 +0800)]
block/bfq_wf2q: correct weight to ioprio

[ Upstream commit bcd2be763252f3a4d5fc4d6008d4d96c601ee74b ]

The return value is ioprio * BFQ_WEIGHT_CONVERSION_COEFF or 0.
What we want is ioprio or 0.
Correct this by changing the calculation.

Signed-off-by: Yahu Gao <gaoyahu19@gmail.com>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20220107065859.25689-1-gaoyahu19@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agorcu: Mark writes to the rcu_segcblist structure's ->flags field
Paul E. McKenney [Tue, 4 Jan 2022 18:34:34 +0000 (10:34 -0800)]
rcu: Mark writes to the rcu_segcblist structure's ->flags field

[ Upstream commit c09929031018913b5783872a8b8cdddef4a543c7 ]

KCSAN reports data races between the rcu_segcblist_clear_flags() and
rcu_segcblist_set_flags() functions, though misreporting the latter
as a call to rcu_segcblist_is_enabled() from call_rcu().  This commit
converts the updates of this field to WRITE_ONCE(), relying on the
resulting unmarked reads to continue to detect buggy concurrent writes
to this field.

Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agopinctrl: npcm: Fix broken references to chip->parent_device
Marc Zyngier [Tue, 1 Feb 2022 12:03:08 +0000 (12:03 +0000)]
pinctrl: npcm: Fix broken references to chip->parent_device

[ Upstream commit f7e53e2255808ca3abcc8f38d18ad0823425e771 ]

The npcm driver has a bunch of references to the irq_chip parent_device
field, but never sets it.

Fix it by fishing that reference from somewhere else, but it is
obvious that these debug statements were never used. Also remove
an unused field in a local data structure.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220201120310.878267-11-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agogcc-plugins/stackleak: Exactly match strings instead of prefixes
Kees Cook [Sun, 6 Feb 2022 17:08:20 +0000 (09:08 -0800)]
gcc-plugins/stackleak: Exactly match strings instead of prefixes

[ Upstream commit 27e9faf415dbf94af19b9c827842435edbc1fbbc ]

Since STRING_CST may not be NUL terminated, strncmp() was used for check
for equality. However, this may lead to mismatches for longer section
names where the start matches the tested-for string. Test for exact
equality by checking for the presences of NUL termination.

Cc: Alexander Popov <alex.popov@linux.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agocrypto: hisilicon/qm - cleanup warning in qm_vf_read_qos
Kai Ye [Sat, 22 Jan 2022 09:30:42 +0000 (17:30 +0800)]
crypto: hisilicon/qm - cleanup warning in qm_vf_read_qos

[ Upstream commit 05b3bade290d6c940701f97f3233c07cfe27205d ]

The kernel test rebot report this warning: Uninitialized variable: ret.
The code flow may return value of ret directly. This value is an
uninitialized variable, here is fix it.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoregulator: rpi-panel: Handle I2C errors/timing to the Atmel
Dave Stevenson [Mon, 24 Jan 2022 22:01:22 +0000 (17:01 -0500)]
regulator: rpi-panel: Handle I2C errors/timing to the Atmel

[ Upstream commit 5665eee7a3800430e7dc3ef6f25722476b603186 ]

The Atmel is doing some things in the I2C ISR, during which
period it will not respond to further commands. This is
particularly true of the POWERON command.

Increase delays appropriately, and retry should I2C errors be
reported.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20220124220129.158891-3-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoLSM: general protection fault in legacy_parse_param
Casey Schaufler [Thu, 27 Jan 2022 04:51:00 +0000 (04:51 +0000)]
LSM: general protection fault in legacy_parse_param

[ Upstream commit ecff30575b5ad0eda149aadad247b7f75411fd47 ]

The usual LSM hook "bail on fail" scheme doesn't work for cases where
a security module may return an error code indicating that it does not
recognize an input.  In this particular case Smack sees a mount option
that it recognizes, and returns 0. A call to a BPF hook follows, which
returns -ENOPARAM, which confuses the caller because Smack has processed
its data.

The SELinux hook incorrectly returns 1 on success. There was a time
when this was correct, however the current expectation is that it
return 0 on success. This is repaired.

Reported-by: syzbot+d1e3b1d92d25abf97943@syzkaller.appspotmail.com
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agofs: fix fd table size alignment properly
Linus Torvalds [Wed, 30 Mar 2022 06:29:18 +0000 (23:29 -0700)]
fs: fix fd table size alignment properly

[ Upstream commit d888c83fcec75194a8a48ccd283953bdba7b2550 ]

Jason Donenfeld reports that my commit 1c24a186398f ("fs: fd tables have
to be multiples of BITS_PER_LONG") doesn't work, and the reason is an
embarrassing brown-paper-bag bug.

Yes, we want to align the number of fds to BITS_PER_LONG, and yes, the
reason they might not be aligned is because the incoming 'max_fd'
argument might not be aligned.

But aligining the argument - while simple - will cause a "infinitely
big" maxfd (eg NR_OPEN_MAX) to just overflow to zero.  Which most
definitely isn't what we want either.

The obvious fix was always just to do the alignment last, but I had
moved it earlier just to make the patch smaller and the code look
simpler.  Duh.  It certainly made _me_ look simple.

Fixes: 1c24a186398f ("fs: fd tables have to be multiples of BITS_PER_LONG")
Reported-and-tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Fedor Pchelkin <aissur0002@gmail.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agolib/test: use after free in register_test_dev_kmod()
Dan Carpenter [Thu, 24 Mar 2022 05:52:07 +0000 (08:52 +0300)]
lib/test: use after free in register_test_dev_kmod()

[ Upstream commit dc0ce6cc4b133f5f2beb8b47dacae13a7d283c2c ]

The "test_dev" pointer is freed but then returned to the caller.

Fixes: d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agofs: fd tables have to be multiples of BITS_PER_LONG
Linus Torvalds [Tue, 29 Mar 2022 22:06:39 +0000 (15:06 -0700)]
fs: fd tables have to be multiples of BITS_PER_LONG

[ Upstream commit 1c24a186398f59c80adb9a967486b65c1423a59d ]

This has always been the rule: fdtables have several bitmaps in them,
and as a result they have to be sized properly for bitmaps.  We walk
those bitmaps in chunks of 'unsigned long' in serveral cases, but even
when we don't, we use the regular kernel bitops that are defined to work
on arrays of 'unsigned long', not on some byte array.

Now, the distinction between arrays of bytes and 'unsigned long'
normally only really ends up being noticeable on big-endian systems, but
Fedor Pchelkin and Alexey Khoroshilov reported that copy_fd_bitmaps()
could be called with an argument that wasn't even a multiple of
BITS_PER_BYTE.  And then it fails to do the proper copy even on
little-endian machines.

The bug wasn't in copy_fd_bitmap(), but in sane_fdtable_size(), which
didn't actually sanitize the fdtable size sufficiently, and never made
sure it had the proper BITS_PER_LONG alignment.

That's partly because the alignment historically came not from having to
explicitly align things, but simply from previous fdtable sizes, and
from count_open_files(), which counts the file descriptors by walking
them one 'unsigned long' word at a time and thus naturally ends up doing
sizing in the proper 'chunks of unsigned long'.

But with the introduction of close_range(), we now have an external
source of "this is how many files we want to have", and so
sane_fdtable_size() needs to do a better job.

This also adds that explicit alignment to alloc_fdtable(), although
there it is mainly just for documentation at a source code level.  The
arithmetic we do there to pick a reasonable fdtable size already aligns
the result sufficiently.

In fact,clang notices that the added ALIGN() in that function doesn't
actually do anything, and does not generate any extra code for it.

It turns out that gcc ends up confusing itself by combining a previous
constant-sized shift operation with the variable-sized shift operations
in roundup_pow_of_two().  And probably due to that doesn't notice that
the ALIGN() is a no-op.  But that's a (tiny) gcc misfeature that doesn't
matter.  Having the explicit alignment makes sense, and would actually
matter on a 128-bit architecture if we ever go there.

This also adds big comments above both functions about how fdtable sizes
have to have that BITS_PER_LONG alignment.

Fixes: 60997c3d45d9 ("close_range: add CLOSE_RANGE_UNSHARE")
Reported-by: Fedor Pchelkin <aissur0002@gmail.com>
Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Link: https://lore.kernel.org/all/20220326114009.1690-1-aissur0002@gmail.com/
Tested-and-acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iterator
Xiaomeng Tong [Mon, 28 Mar 2022 03:24:31 +0000 (11:24 +0800)]
net: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iterator

[ Upstream commit 6da69b1da130e7d96766042750cd9f902e890eba ]

The bug is here:
return rule;

The list iterator value 'rule' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.

To fix the bug, return 'rule' when found, otherwise return NULL.

Fixes: ae7a5aff783c7 ("net: dsa: bcm_sf2: Keep copy of inserted rules")
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220328032431.22538-1-xiam0nd.tong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoNFSv4/pNFS: Fix another issue with a list iterator pointing to the head
Trond Myklebust [Mon, 28 Mar 2022 12:36:34 +0000 (08:36 -0400)]
NFSv4/pNFS: Fix another issue with a list iterator pointing to the head

[ Upstream commit 7c9d845f0612e5bcd23456a2ec43be8ac43458f1 ]

In nfs4_callback_devicenotify(), if we don't find a matching entry for
the deviceid, we're left with a pointer to 'struct nfs_server' that
actually points to the list of super blocks associated with our struct
nfs_client.
Furthermore, even if we have a valid pointer, nothing pins the super
block, and so the struct nfs_server could end up getting freed while
we're using it.

Since all we want is a pointer to the struct pnfs_layoutdriver_type,
let's skip all the iteration over super blocks, and just use APIs to
find the layout driver directly.

Reported-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Fixes: 1be5683b03a7 ("pnfs: CB_NOTIFY_DEVICEID")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet/sched: act_ct: fix ref leak when switching zones
Marcelo Ricardo Leitner [Thu, 24 Mar 2022 19:22:10 +0000 (16:22 -0300)]
net/sched: act_ct: fix ref leak when switching zones

[ Upstream commit bcb74e132a76ce0502bb33d5b65533a4ed72d159 ]

When switching zones or network namespaces without doing a ct clear in
between, it is now leaking a reference to the old ct entry. That's
because tcf_ct_skb_nfct_cached() returns false and
tcf_ct_flow_table_lookup() may simply overwrite it.

The fix is to, as the ct entry is not reusable, free it already at
tcf_ct_skb_nfct_cached().

Reported-by: Florian Westphal <fw@strlen.de>
Fixes: 2f131de361f6 ("net/sched: act_ct: Fix flow table lookup after ct clear or switching zones")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: prefer nf_ct_put instead of nf_conntrack_put
Florian Westphal [Fri, 7 Jan 2022 04:03:26 +0000 (05:03 +0100)]
net: prefer nf_ct_put instead of nf_conntrack_put

[ Upstream commit 408bdcfce8dfd6902f75fbcd3b99d8b24b506597 ]

Its the same as nf_conntrack_put(), but without the
need for an indirect call.  The downside is a module dependency on
nf_conntrack, but all of these already depend on conntrack anyway.

Cc: Paul Blakey <paulb@mellanox.com>
Cc: dev@openvswitch.org
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoocteontx2-af: initialize action variable
Tom Rix [Sat, 26 Mar 2022 16:03:06 +0000 (09:03 -0700)]
octeontx2-af: initialize action variable

[ Upstream commit 33b5bc9e703383e396f275d51fc4bafa48dbae5a ]

Clang static analysis reports this representative issue
rvu_npc.c:898:15: warning: Assigned value is garbage
  or undefined
  req.match_id = action.match_id;
               ^ ~~~~~~~~~~~~~~~

The initial setting of action is conditional on
 if (is_mcam_entry_enabled(...))
The later check of action.op will sometimes be garbage.
So initialize action.

Reduce setting of
  *(u64 *)&action = 0x00;
to
  *(u64 *)&action = 0;

Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: sparx5: switchdev: fix possible NULL pointer dereference
Zheng Yongjun [Sat, 26 Mar 2022 08:12:39 +0000 (08:12 +0000)]
net: sparx5: switchdev: fix possible NULL pointer dereference

[ Upstream commit 0906f3a3df07835e37077d8971aac65347f2ed57 ]

As the possible failure of the allocation, devm_kzalloc() may return NULL
pointer.
Therefore, it should be better to check the 'db' in order to prevent
the dereference of NULL pointer.

Fixes: 10615907e9b51 ("net: sparx5: switchdev: adding frame DMA functionality")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet/x25: Fix null-ptr-deref caused by x25_disconnect
Duoming Zhou [Sat, 26 Mar 2022 10:43:46 +0000 (18:43 +0800)]
net/x25: Fix null-ptr-deref caused by x25_disconnect

[ Upstream commit 7781607938c8371d4c2b243527430241c62e39c2 ]

When the link layer is terminating, x25->neighbour will be set to NULL
in x25_disconnect(). As a result, it could cause null-ptr-deref bugs in
x25_sendmsg(),x25_recvmsg() and x25_connect(). One of the bugs is
shown below.

    (Thread 1)                 |  (Thread 2)
x25_link_terminated()          | x25_recvmsg()
 x25_kill_by_neigh()           |  ...
  x25_disconnect()             |  lock_sock(sk)
   ...                         |  ...
   x25->neighbour = NULL //(1) |
   ...                         |  x25->neighbour->extended //(2)

The code sets NULL to x25->neighbour in position (1) and dereferences
x25->neighbour in position (2), which could cause null-ptr-deref bug.

This patch adds lock_sock() in x25_kill_by_neigh() in order to synchronize
with x25_sendmsg(), x25_recvmsg() and x25_connect(). What`s more, the
sock held by lock_sock() is not NULL, because it is extracted from x25_list
and uses x25_list_lock to synchronize.

Fixes: 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoqlcnic: dcb: default to returning -EOPNOTSUPP
Tom Rix [Sat, 26 Mar 2022 17:20:03 +0000 (10:20 -0700)]
qlcnic: dcb: default to returning -EOPNOTSUPP

[ Upstream commit 1521db37f0d42334a88e8ff28198a27d1ed5cd7b ]

Clang static analysis reports this issue
qlcnic_dcb.c:382:10: warning: Assigned value is
  garbage or undefined
  mbx_out = *val;
          ^ ~~~~

val is set in the qlcnic_dcb_query_hw_capability() wrapper.
If there is no query_hw_capability op in dcp, success is
returned without setting the val.

For this and similar wrappers, return -EOPNOTSUPP.

Fixes: 14d385b99059 ("qlcnic: dcb: Query adapter DCB capabilities.")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: sparx5: depends on PTP_1588_CLOCK_OPTIONAL
Randy Dunlap [Sat, 26 Mar 2022 18:02:34 +0000 (11:02 -0700)]
net: sparx5: depends on PTP_1588_CLOCK_OPTIONAL

[ Upstream commit 08be6b13db23f68146c600dd5adfd92e99d9ec6e ]

Fix build errors when PTP_1588_CLOCK=m and SPARX5_SWTICH=y.

arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ethtool.o: in function `sparx5_get_ts_info':
sparx5_ethtool.c:(.text+0x146): undefined reference to `ptp_clock_index'
arc-linux-ld: sparx5_ethtool.c:(.text+0x146): undefined reference to `ptp_clock_index'
arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ptp.o: in function `sparx5_ptp_init':
sparx5_ptp.c:(.text+0xd56): undefined reference to `ptp_clock_register'
arc-linux-ld: sparx5_ptp.c:(.text+0xd56): undefined reference to `ptp_clock_register'
arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ptp.o: in function `sparx5_ptp_deinit':
sparx5_ptp.c:(.text+0xf30): undefined reference to `ptp_clock_unregister'
arc-linux-ld: sparx5_ptp.c:(.text+0xf30): undefined reference to `ptp_clock_unregister'
arc-linux-ld: sparx5_ptp.c:(.text+0xf38): undefined reference to `ptp_clock_unregister'
arc-linux-ld: sparx5_ptp.c:(.text+0xf46): undefined reference to `ptp_clock_unregister'
arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ptp.o:sparx5_ptp.c:(.text+0xf46): more undefined references to `ptp_clock_unregister' follow

Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Steen Hegelund <steen.hegelund@microchip.com>
Cc: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Cc: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: hns3: clean residual vf config after disable sriov
Peng Li [Sat, 26 Mar 2022 09:51:02 +0000 (17:51 +0800)]
net: hns3: clean residual vf config after disable sriov

[ Upstream commit 671cb8cbb9c9e24b681d21b1bfae991e2386ac73 ]

After disable sriov, VF still has some config and info need to be
cleaned, which configured by PF. This patch clean the HW config
and SW struct vport->vf_info.

Fixes: fa8d82e853e8 ("net: hns3: Add support of .sriov_configure in HNS3 driver")
Signed-off-by: Peng Li<lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoNFS: Don't loop forever in nfs_do_recoalesce()
Trond Myklebust [Sat, 26 Mar 2022 01:51:03 +0000 (21:51 -0400)]
NFS: Don't loop forever in nfs_do_recoalesce()

[ Upstream commit d02d81efc7564b4d5446a02e0214a164cf00b1f3 ]

If __nfs_pageio_add_request() fails to add the request, it will return
with either desc->pg_error < 0, or mirror->pg_recoalesce will be set, so
we are guaranteed either to exit the function altogether, or to loop.

However if there is nothing left in mirror->pg_list to coalesce, we must
exit, so make sure that we clear mirror->pg_recoalesce every time we
loop.

Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: 70536bf4eb07 ("NFS: Clean up reset of the mirror accounting variables")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoselftests: test_vxlan_under_vrf: Fix broken test case
Ido Schimmel [Thu, 24 Mar 2022 20:05:14 +0000 (22:05 +0200)]
selftests: test_vxlan_under_vrf: Fix broken test case

[ Upstream commit b50d3b46f84282d795ae3076111acb75ae1031f3 ]

The purpose of the last test case is to test VXLAN encapsulation and
decapsulation when the underlay lookup takes place in a non-default VRF.
This is achieved by enslaving the physical device of the tunnel to a
VRF.

The binding of the VXLAN UDP socket to the VRF happens when the VXLAN
device itself is opened, not when its physical device is opened. This
was also mentioned in the cited commit ("tests that moving the underlay
from a VRF to another works when down/up the VXLAN interface"), but the
test did something else.

Fix it by reopening the VXLAN device instead of its physical device.

Before:

 # ./test_vxlan_under_vrf.sh
 Checking HV connectivity                                           [ OK ]
 Check VM connectivity through VXLAN (underlay in the default VRF)  [ OK ]
 Check VM connectivity through VXLAN (underlay in a VRF)            [FAIL]

After:

 # ./test_vxlan_under_vrf.sh
 Checking HV connectivity                                           [ OK ]
 Check VM connectivity through VXLAN (underlay in the default VRF)  [ OK ]
 Check VM connectivity through VXLAN (underlay in a VRF)            [ OK ]

Fixes: 03f1c26b1c56 ("test/net: Add script for VXLAN underlay in a VRF")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220324200514.1638326-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: phy: broadcom: Fix brcm_fet_config_init()
Florian Fainelli [Thu, 24 Mar 2022 23:24:38 +0000 (16:24 -0700)]
net: phy: broadcom: Fix brcm_fet_config_init()

[ Upstream commit bf8bfc4336f7a34e48b3bbd19b1542bf085bdc3d ]

A Broadcom AC201 PHY (same entry as 5241) would be flagged by the
Broadcom UniMAC MDIO controller as not completing the turn around
properly since the PHY expects 65 MDC clock cycles to complete a write
cycle, and the MDIO controller was only sending 64 MDC clock cycles as
determined by looking at a scope shot.

This would make the subsequent read fail with the UniMAC MDIO controller
command field having MDIO_READ_FAIL set and we would abort the
brcm_fet_config_init() function and thus not probe the PHY at all.

After issuing a software reset, wait for at least 1ms which is well
above the 1us reset delay advertised by the datasheet and issue a dummy
read to let the PHY turn around the line properly. This read
specifically ignores -EIO which would be returned by MDIO controllers
checking for the line being turned around.

If we have a genuine reaad failure, the next read of the interrupt
status register would pick it up anyway.

Fixes: d7a2ed9248a3 ("broadcom: Add AC131 phy support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220324232438.1156812-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: hns3: refine the process when PF set VF VLAN
Jian Shen [Thu, 24 Mar 2022 12:54:50 +0000 (20:54 +0800)]
net: hns3: refine the process when PF set VF VLAN

[ Upstream commit 190cd8a72b0181c543ecada6243be3a50636941b ]

Currently, when PF set VF VLAN, it sends notify mailbox to VF
if VF alive. VF stop its traffic, and send request mailbox
to PF, then PF updates VF VLAN. It's a bit complex. If VF is
killed before sending request, PF will not set VF VLAN without
any log.

This patch refines the process, PF can set VF VLAN direclty,
and then notify the VF. If VF is resetting at that time, the
notify may be dropped, so VF should query it after reset finished.

Fixes: 92f11ea177cd ("net: hns3: fix set port based VLAN issue for VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: hns3: format the output of the MAC address
Yufeng Mo [Wed, 24 Nov 2021 01:06:52 +0000 (09:06 +0800)]
net: hns3: format the output of the MAC address

[ Upstream commit 4f331fda35f1695af8ddd8180edc948880def74b ]

Printing the whole MAC addresse may bring security risks. Therefore,
the MAC address is partially encrypted to improve security.

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: hns3: add vlan list lock to protect vlan list
Jian Shen [Thu, 24 Mar 2022 12:54:49 +0000 (20:54 +0800)]
net: hns3: add vlan list lock to protect vlan list

[ Upstream commit 1932a624ab88ff407d1a1d567fe581faa15dc725 ]

When adding port base VLAN, vf VLAN need to remove from HW and modify
the vlan state in vf VLAN list as false. If the periodicity task is
freeing the same node, it may cause "use after free" error.
This patch adds a vlan list lock to protect the vlan list.

Fixes: c6075b193462 ("net: hns3: Record VF vlan tables")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: hns3: fix port base vlan add fail when concurrent with reset
Jian Shen [Thu, 24 Mar 2022 12:54:48 +0000 (20:54 +0800)]
net: hns3: fix port base vlan add fail when concurrent with reset

[ Upstream commit c0f46de30c965d4ba208b5bf1a6d3437a7556ee2 ]

Currently, Port base vlan is initiated by PF and configured to its VFs,
by using command "ip link set <pf name> vf <vf id> vlan <vlan id>".
When a global reset was triggered, the hardware vlan table and the soft
recorded vlan information will be cleared by PF, and restored them until
VFs were ready. There is a short time window between the table had been
cleared and before table restored. If configured a new port base vlan tag
at this moment, driver will check the soft recorded vlan information,
and find there hasn't the old tag in it, which causing a warning print.

Due to the port base vlan is managed by PF, so the VFs's port base vlan
restoring should be handled by PF when PF was ready.

This patch fixes it.

Fixes: 039ba863e8d7 ("net: hns3: optimize the filter table entries handling when resetting")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: hns3: fix bug when PF set the duplicate MAC address for VFs
Jian Shen [Thu, 24 Mar 2022 12:54:47 +0000 (20:54 +0800)]
net: hns3: fix bug when PF set the duplicate MAC address for VFs

[ Upstream commit ccb18f05535c96d26e2d559d402acb87700fc5a7 ]

If the MAC address A is configured to vport A and then vport B. The MAC
address of vport A in the hardware becomes invalid. If the address of
vport A is changed to MAC address B, the driver needs to delete the MAC
address A of vport A. Due to the MAC address A of vport A has become
invalid in the hardware entry, so "-ENOENT" is returned. In this case, the
"used_umv_size" value recorded in driver is not updated. As a result, the
MAC entry status of the software is inconsistent with that of the hardware.

Therefore, the driver updates the umv size even if the MAC entry cannot be
found. Ensure that the software and hardware status is consistent.

Fixes: ee4bcd3b7ae4 ("net: hns3: refactor the MAC address configure")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonet: enetc: report software timestamping via SO_TIMESTAMPING
Vladimir Oltean [Thu, 24 Mar 2022 16:12:10 +0000 (18:12 +0200)]
net: enetc: report software timestamping via SO_TIMESTAMPING

[ Upstream commit feb13dcb1818b775fbd9191f797be67cd605f03e ]

Let user space properly determine that the enetc driver provides
software timestamps.

Fixes: 4caefbce06d1 ("enetc: add software timestamping")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220324161210.4122281-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoxen: fix is_xen_pmu()
Juergen Gross [Fri, 25 Mar 2022 14:20:02 +0000 (15:20 +0100)]
xen: fix is_xen_pmu()

[ Upstream commit de2ae403b4c0e79a3410e63bc448542fbb9f9bfc ]

is_xen_pmu() is taking the cpu number as parameter, but it is not using
it. Instead it just tests whether the Xen PMU initialization on the
current cpu did succeed. As this test is done by checking a percpu
pointer, preemption needs to be disabled in order to avoid switching
the cpu while doing the test. While resuming from suspend() this seems
not to be the case:

[   88.082751] ACPI: PM: Low-level resume complete
[   88.087933] ACPI: EC: EC started
[   88.091464] ACPI: PM: Restoring platform NVS memory
[   88.097166] xen_acpi_processor: Uploading Xen processor PM info
[   88.103850] Enabling non-boot CPUs ...
[   88.108128] installing Xen timer for CPU 1
[   88.112763] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-sleep/7138
[   88.122256] caller is is_xen_pmu+0x12/0x30
[   88.126937] CPU: 0 PID: 7138 Comm: systemd-sleep Tainted: G        W         5.16.13-2.fc32.qubes.x86_64 #1
[   88.137939] Hardware name: Star Labs StarBook/StarBook, BIOS 7.97 03/21/2022
[   88.145930] Call Trace:
[   88.148757]  <TASK>
[   88.151193]  dump_stack_lvl+0x48/0x5e
[   88.155381]  check_preemption_disabled+0xde/0xe0
[   88.160641]  is_xen_pmu+0x12/0x30
[   88.164441]  xen_smp_intr_init_pv+0x75/0x100

Fix that by replacing is_xen_pmu() by a simple boolean variable which
reflects the Xen PMU initialization state on cpu 0.

Modify xen_pmu_init() to return early in case it is being called for a
cpu other than cpu 0 and the boolean variable not being set.

Fixes: bf6dfb154d93 ("xen/PMU: PMU emulation code")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220325142002.31789-1-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoclk: Initialize orphan req_rate
Maxime Ripard [Fri, 25 Mar 2022 16:11:42 +0000 (17:11 +0100)]
clk: Initialize orphan req_rate

[ Upstream commit 5f7e2af00807f2117650e711a58b7f0e986ce1df ]

When registering a clock that doesn't have a recalc_rate implementation,
and doesn't have its parent registered yet, we initialize the clk_core
rate and 'req_rate' fields to 0.

The rate field is later updated when the parent is registered in
clk_core_reparent_orphans_nolock() using __clk_recalc_rates(), but the
'req_rate' field is never updated.

This leads to an issue in clk_set_rate_range() and clk_put(), since
those functions will call clk_set_rate() with the content of 'req_rate'
to provide drivers with the opportunity to change the rate based on the
new boundaries. In this case, we would call clk_set_rate() with a rate
of 0, effectively enforcing the minimum allowed for this clock whenever
we would call one of those two functions, even though the actual rate
might be within range.

Let's fix this by setting 'req_rate' in
clk_core_reparent_orphans_nolock() with the rate field content just
updated by the call to __clk_recalc_rates().

Fixes: 1c8e600440c7 ("clk: Add rate constraints to clocks")
Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> # T30 Nexus7
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220325161144.1901695-2-maxime@cerno.tech
[sboyd@kernel.org: Reword comment]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agovsock/virtio: enable VQs early on probe
Stefano Garzarella [Wed, 23 Mar 2022 17:36:25 +0000 (18:36 +0100)]
vsock/virtio: enable VQs early on probe

[ Upstream commit 88704454ef8b00ea91537ae0d47d9348077e0e72 ]

virtio spec requires drivers to set DRIVER_OK before using VQs.
This is set automatically after probe returns, but virtio-vsock
driver uses VQs in the probe function to fill rx and event VQs
with new buffers.

Let's fix this, calling virtio_device_ready() before using VQs
in the probe function.

Fixes: 0ea9e1d3a9e3 ("VSOCK: Introduce virtio_transport.ko")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agovsock/virtio: read the negotiated features before using VQs
Stefano Garzarella [Wed, 23 Mar 2022 17:36:24 +0000 (18:36 +0100)]
vsock/virtio: read the negotiated features before using VQs

[ Upstream commit c1011c0b3a9c8d2065f425407475cbcc812540b7 ]

Complete the driver configuration, reading the negotiated features,
before using the VQs in the virtio_vsock_probe().

Fixes: 53efbba12cc7 ("virtio/vsock: enable SEQPACKET for transport")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agovsock/virtio: initialize vdev->priv before using VQs
Stefano Garzarella [Wed, 23 Mar 2022 17:36:23 +0000 (18:36 +0100)]
vsock/virtio: initialize vdev->priv before using VQs

[ Upstream commit 4b5f1ad5566ada230aaa2ce861b28d1895f1ea68 ]

When we fill VQs with empty buffers and kick the host, it may send
an interrupt. `vdev->priv` must be initialized before this since it
is used in the virtqueue callbacks.

Fixes: 0deab087b16a ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoclk: qcom: gcc-msm8994: Fix gpll4 width
Konrad Dybcio [Sat, 19 Mar 2022 17:49:40 +0000 (18:49 +0100)]
clk: qcom: gcc-msm8994: Fix gpll4 width

[ Upstream commit 71021db1c532c2545ae53b9ee85b37b7154f51d4 ]

The gpll4 postdiv is actually a div4, so make sure that Linux is aware of
this.

This fixes the following error messages:

 mmc1: Card appears overclocked; req 200000000 Hz, actual 343999999 Hz
 mmc1: Card appears overclocked; req 400000000 Hz, actual 687999999 Hz

Fixes: aec89f78cf01 ("clk: qcom: Add support for msm8994 global clock controller")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20220319174940.341137-1-konrad.dybcio@somainline.org
Tested-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoperf stat: Fix forked applications enablement of counters
Thomas Richter [Thu, 17 Mar 2022 15:53:46 +0000 (16:53 +0100)]
perf stat: Fix forked applications enablement of counters

[ Upstream commit d0a0a511493d269514fcbd852481cdca32c95350 ]

I have run into the following issue:

 # perf stat -a -e new_pmu/INSTRUCTION_7/ --  mytest -c1 7

 Performance counter stats for 'system wide':

                 0      new_pmu/INSTRUCTION_7/

       0.000366428 seconds time elapsed
 #

The new PMU for s390 counts the execution of certain CPU instructions.
The root cause is the extremely small run time of the mytest program. It
just executes some assembly instructions and then exits.

In above invocation the instruction is executed exactly one time (-c1
option). The PMU is expected to report this one time execution by a
counter value of one, but fails to do so in some cases, not all.

Debugging reveals the invocation of the child process is done
*before* the counter events are installed and enabled.

Tracing reveals that sometimes the child process starts and exits before
the event is installed on all CPUs. The more CPUs the machine has, the
more often this miscount happens.

Fix this by reversing the start of the work load after the events have
been installed on the specified CPUs. Now the comment also matches the
code.

Output after:

 # perf stat -a -e new_pmu/INSTRUCTION_7/ --  mytest -c1 7

 Performance counter stats for 'system wide':

                 1      new_pmu/INSTRUCTION_7/

       0.000366428 seconds time elapsed
 #

Now the correct result is reported rock solid all the time regardless
how many CPUs are online.

Reviewers notes:

Jiri:

Right, without -a the event has enable_on_exec so the race does not
matter, but it's a problem for system wide with fork.

Namhyung:

Agreed. Also we may move the enable_counters() and the clock code out of
the if block to be shared with the else block.

Fixes: acf2892270dcc428 ("perf stat: Use perf_evlist__prepare/start_workload()")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20220317155346.577384-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agokdb: Fix the putarea helper function
Daniel Thompson [Fri, 28 Jan 2022 14:40:55 +0000 (14:40 +0000)]
kdb: Fix the putarea helper function

[ Upstream commit c1cb81429df462eca1b6ba615cddd21dd3103c46 ]

Currently kdb_putarea_size() uses copy_from_kernel_nofault() to write *to*
arbitrary kernel memory. This is obviously wrong and means the memory
modify ('mm') command is a serious risk to debugger stability: if we poke
to a bad address we'll double-fault and lose our debug session.

Fix this the (very) obvious way.

Note that there are two Fixes: tags because the API was renamed and this
patch will only trivially backport as far as the rename (and this is
probably enough). Nevertheless Christoph's rename did not introduce this
problem so I wanted to record that!

Fixes: fe557319aa06 ("maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault")
Fixes: 5d5314d6795f ("kdb: core for kgdb back end (1 of 2)")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220128144055.207267-1-daniel.thompson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoNFSv4.1: don't retry BIND_CONN_TO_SESSION on session error
Olga Kornievskaia [Thu, 24 Mar 2022 14:38:42 +0000 (10:38 -0400)]
NFSv4.1: don't retry BIND_CONN_TO_SESSION on session error

[ Upstream commit 1d15d121cc2ad4d016a7dc1493132a9696f91fc5 ]

There is no reason to retry the operation if a session error had
occurred in such case result structure isn't filled out.

Fixes: dff58530c4ca ("NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoSUNRPC don't resend a task on an offlined transport
Olga Kornievskaia [Thu, 24 Mar 2022 14:22:58 +0000 (10:22 -0400)]
SUNRPC don't resend a task on an offlined transport

[ Upstream commit 82ee41b85cef16b4be1f4732650012d9baaedddd ]

When a task is being retried, due to an NFS error, if the assigned
transport has been put offline and the task is relocatable pick a new
transport.

Fixes: 6f081693e7b2b ("sunrpc: remove an offlined xprt using sysfs")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonetfilter: nf_conntrack_tcp: preserve liberal flag in tcp options
Pablo Neira Ayuso [Mon, 21 Mar 2022 10:38:32 +0000 (11:38 +0100)]
netfilter: nf_conntrack_tcp: preserve liberal flag in tcp options

[ Upstream commit f2dd495a8d589371289981d5ed33e6873df94ecc ]

Do not reset IP_CT_TCP_FLAG_BE_LIBERAL flag in out-of-sync scenarios
coming before the TCP window tracking, otherwise such connections will
fail in the window check.

Update tcp_options() to leave this flag in place and add a new helper
function to reset the tcp window state.

Based on patch from Sven Auhagen.

Fixes: c4832c7bbc3f ("netfilter: nf_ct_tcp: improve out-of-sync situation in TCP tracking")
Tested-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agojfs: fix divide error in dbNextAG
Pavel Skripkin [Sat, 19 Mar 2022 19:30:00 +0000 (22:30 +0300)]
jfs: fix divide error in dbNextAG

[ Upstream commit 2cc7cc01c15f57d056318c33705647f87dcd4aab ]

Syzbot reported divide error in dbNextAG(). The problem was in missing
validation check for malicious image.

Syzbot crafted an image with bmp->db_numag equal to 0. There wasn't any
validation checks, but dbNextAG() blindly use bmp->db_numag in divide
expression

Fix it by validating bmp->db_numag in dbMount() and return an error if
image is malicious

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+46f5c25af73eb8330eb6@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodriver core: dd: fix return value of __setup handler
Randy Dunlap [Tue, 1 Mar 2022 04:18:29 +0000 (20:18 -0800)]
driver core: dd: fix return value of __setup handler

[ Upstream commit f2aad54703dbe630f9d8b235eb58e8c8cc78f37d ]

When "driver_async_probe=nulltty" is used on the kernel boot command line,
it causes an Unknown parameter message and the string is added to init's
environment strings, polluting them.

  Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc6
  driver_async_probe=nulltty", will be passed to user space.

 Run /sbin/init as init process
   with arguments:
     /sbin/init
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc6
     driver_async_probe=nulltty

Change the return value of the __setup function to 1 to indicate
that the __setup option has been handled.

Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Fixes: 1ea61b68d0f8 ("async: Add cmdline option to specify drivers to be async probed")
Cc: Feng Tang <feng.tang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220301041829.15137-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agofirmware: google: Properly state IOMEM dependency
David Gow [Fri, 25 Feb 2022 04:15:02 +0000 (12:15 +0800)]
firmware: google: Properly state IOMEM dependency

[ Upstream commit 37fd83916da2e4cae03d350015c82a67b1b334c4 ]

The Google Coreboot implementation requires IOMEM functions
(memmremap, memunmap, devm_memremap), but does not specify this is its
Kconfig. This results in build errors when HAS_IOMEM is not set, such as
on some UML configurations:

/usr/bin/ld: drivers/firmware/google/coreboot_table.o: in function `coreboot_table_probe':
coreboot_table.c:(.text+0x311): undefined reference to `memremap'
/usr/bin/ld: coreboot_table.c:(.text+0x34e): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/memconsole-coreboot.o: in function `memconsole_probe':
memconsole-coreboot.c:(.text+0x12d): undefined reference to `memremap'
/usr/bin/ld: memconsole-coreboot.c:(.text+0x17e): undefined reference to `devm_memremap'
/usr/bin/ld: memconsole-coreboot.c:(.text+0x191): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_section_destroy.isra.0':
vpd.c:(.text+0x300): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_section_init':
vpd.c:(.text+0x382): undefined reference to `memremap'
/usr/bin/ld: vpd.c:(.text+0x459): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_probe':
vpd.c:(.text+0x59d): undefined reference to `memremap'
/usr/bin/ld: vpd.c:(.text+0x5d3): undefined reference to `memunmap'
collect2: error: ld returned 1 exit status

Fixes: a28aad66da8b ("firmware: coreboot: Collapse platform drivers into bus core")
Acked-By: anton ivanov <anton.ivanov@cambridgegreys.com>
Acked-By: Julius Werner <jwerner@chromium.org>
Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20220225041502.1901806-1-davidgow@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agokgdbts: fix return value of __setup handler
Randy Dunlap [Tue, 8 Mar 2022 03:32:55 +0000 (19:32 -0800)]
kgdbts: fix return value of __setup handler

[ Upstream commit 96c9e802c64014a7716865332d732cc9c7f24593 ]

__setup() handlers should return 1 to indicate that the boot option
has been handled. A return of 0 causes the boot option/value to be
listed as an Unknown kernel parameter and added to init's (limited)
environment strings. So return 1 from kgdbts_option_setup().

Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
  kgdboc=kbd kgdbts=", will be passed to user space.

 Run /sbin/init as init process
   with arguments:
     /sbin/init
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc7
     kgdboc=kbd
     kgdbts=

Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Fixes: e8d31c204e36 ("kgdb: add kgdb internal test suite")
Cc: kgdb-bugreport@lists.sourceforge.net
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220308033255.22118-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agovirt: acrn: fix a memory leak in acrn_dev_ioctl()
Xiaolong Huang [Tue, 8 Mar 2022 09:20:47 +0000 (17:20 +0800)]
virt: acrn: fix a memory leak in acrn_dev_ioctl()

[ Upstream commit ecd1735f14d6ac868ae5d8b7a2bf193fa11f388b ]

The vm_param and cpu_regs need to be freed via kfree()
before return -EINVAL error.

Fixes: 9c5137aedd11 ("virt: acrn: Introduce VM management interfaces")
Fixes: 2ad2aaee1bc9 ("virt: acrn: Introduce an ioctl to set vCPU registers state")
Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com>
Signed-off-by: Fei Li <fei1.li@intel.com>
Link: https://lore.kernel.org/r/20220308092047.1008409-1-butterflyhuangxx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agovirt: acrn: obtain pa from VMA with PFNMAP flag
Yonghua Huang [Mon, 28 Feb 2022 02:22:12 +0000 (05:22 +0300)]
virt: acrn: obtain pa from VMA with PFNMAP flag

[ Upstream commit 8a6e85f75a83d16a71077e41f2720c691f432002 ]

 acrn_vm_ram_map can't pin the user pages with VM_PFNMAP flag
 by calling get_user_pages_fast(), the PA(physical pages)
 may be mapped by kernel driver and set PFNMAP flag.

 This patch fixes logic to setup EPT mapping for PFN mapped RAM region
 by checking the memory attribute before adding EPT mapping for them.

Fixes: 88f537d5e8dd ("virt: acrn: Introduce EPT mapping management")
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Signed-off-by: Fei Li <fei1.li@intel.com>
Link: https://lore.kernel.org/r/20220228022212.419406-1-yonghua.huang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoserial: 8250: fix XOFF/XON sending when DMA is used
Ilpo Järvinen [Mon, 14 Mar 2022 09:14:32 +0000 (11:14 +0200)]
serial: 8250: fix XOFF/XON sending when DMA is used

[ Upstream commit f58c252e30cf74f68b0054293adc03b5923b9f0e ]

When 8250 UART is using DMA, x_char (XON/XOFF) is never sent
to the wire. After this change, x_char is injected correctly.

Create uart_xchar_out() helper for sending the x_char out and
accounting related to it. It seems that almost every driver
does these same steps with x_char. Except for 8250, however,
almost all currently lack .serial_out so they cannot immediately
take advantage of this new helper.

The downside of this patch is that it might reintroduce
the problems some devices faced with mixed DMA/non-DMA transfer
which caused revert f967fc8f165f (Revert "serial: 8250_dma:
don't bother DMA with small transfers"). However, the impact
should be limited to cases with XON/XOFF (that didn't work
with DMA capable devices to begin with so this problem is not
very likely to cause a major issue, if any at all).

Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Reported-by: Gilles Buloz <gilles.buloz@kontron.com>
Tested-by: Gilles Buloz <gilles.buloz@kontron.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220314091432.4288-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agokgdboc: fix return value of __setup handler
Randy Dunlap [Wed, 9 Mar 2022 03:30:18 +0000 (19:30 -0800)]
kgdboc: fix return value of __setup handler

[ Upstream commit ab818c7aa7544bf8d2dd4bdf68878b17a02eb332 ]

__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.
So return 1 from kgdboc_option_setup().

Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
  kgdboc=kbd kgdbts=", will be passed to user space.

 Run /sbin/init as init process
   with arguments:
     /sbin/init
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc7
     kgdboc=kbd
     kgdbts=

Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Fixes: 1bd54d851f50 ("kgdboc: Passing ekgdboc to command line causes panic")
Fixes: f2d937f3bf00 ("consoles: polling support, kgdboc")
Cc: He Zhe <zhe.he@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: kgdb-bugreport@lists.sourceforge.net
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: linux-serial@vger.kernel.org
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220309033018.17936-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agotty: hvc: fix return value of __setup handler
Randy Dunlap [Tue, 8 Mar 2022 02:42:28 +0000 (18:42 -0800)]
tty: hvc: fix return value of __setup handler

[ Upstream commit 53819a0d97aace1425bb042829e3446952a9e8a9 ]

__setup() handlers should return 1 to indicate that the boot option
has been handled or 0 to indicate that it was not handled.
Add a pr_warn() message if the option value is invalid and then
always return 1.

Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Fixes: 86b40567b917 ("tty: replace strict_strtoul() with kstrtoul()")
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Julian Wiedmann <jwi@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220308024228.20477-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agopinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe
Miaoqian Lin [Mon, 7 Mar 2022 12:02:34 +0000 (12:02 +0000)]
pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe

[ Upstream commit 89388f8730699c259f8090ec435fb43569efe4ac ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

Fixes: 1e747e59cc4d ("pinctrl: rockchip: base regmap supplied by a syscon")
Fixes: 14dee8677e19 ("pinctrl: rockchip: let pmu registers be supplied by a syscon")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307120234.28657-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agopinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe
Miaoqian Lin [Mon, 7 Mar 2022 11:51:16 +0000 (11:51 +0000)]
pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe

[ Upstream commit c09ac191b1f97cfa06f394dbfd7a5db07986cefc ]

This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid
the refcount leak.

Fixes: 32e67eee670e ("pinctrl: nomadik: Allow prcm_base to be extracted from Device Tree")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307115116.25316-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agopinctrl: microchip-sgpio: lock RMW access
Michael Walle [Sat, 26 Feb 2022 20:45:03 +0000 (21:45 +0100)]
pinctrl: microchip-sgpio: lock RMW access

[ Upstream commit 7996c5f5ec7a20b3f6b8fae93fcf3cb8f1c01743 ]

Protect any RMW access to the registers by a spinlock.

Fixes: 7e5ea974e61c ("pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO")
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220226204507.2511633-2-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agopinctrl: microchip sgpio: use reset driver
Horatiu Vultur [Mon, 18 Oct 2021 08:57:54 +0000 (10:57 +0200)]
pinctrl: microchip sgpio: use reset driver

[ Upstream commit 0b90315af7602aeb40fe7b6255ab212a19dbd78e ]

On lan966x platform when the switch gets reseted then also the sgpio
gets reseted. The fix for this is to extend also the sgpio driver to
call the reset driver which will be reseted only once by the first
driver that is probed.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20211018085754.1066056-3-horatiu.vultur@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agopinctrl: mediatek: paris: Skip custom extra pin config dump for virtual GPIOs
Chen-Yu Tsai [Tue, 8 Mar 2022 10:09:51 +0000 (18:09 +0800)]
pinctrl: mediatek: paris: Skip custom extra pin config dump for virtual GPIOs

[ Upstream commit 1763933d377ecb05454f8d20e3c8922480db2ac0 ]

Virtual GPIOs do not have any hardware state associated with them. Any
attempt to read back hardware state for these pins result in error
codes.

Skip dumping extra pin config information for these virtual GPIOs.

Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-7-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agopinctrl: mediatek: paris: Fix pingroup pin config state readback
Chen-Yu Tsai [Tue, 8 Mar 2022 10:09:49 +0000 (18:09 +0800)]
pinctrl: mediatek: paris: Fix pingroup pin config state readback

[ Upstream commit 54fe55fb384ade630ef20b9a8b8f3b2a89ad97f2 ]

mtk_pconf_group_get(), used to read back pingroup pin config state,
simply returns a set of configs saved from a previous invocation of
mtk_pconf_group_set(). This is an unfiltered, unvalidated set passed
in from the pinconf core, which does not match the current hardware
state.

Since the driver library is designed to have one pin per group, pass
through mtk_pconf_group_get() to mtk_pinconf_get(), to read back the
current pin config state of the only pin in the group.

Also drop the assignment of pin config state to the group.

Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-5-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agopinctrl: mediatek: paris: Fix "argument" argument type for mtk_pinconf_get()
Chen-Yu Tsai [Tue, 8 Mar 2022 10:09:48 +0000 (18:09 +0800)]
pinctrl: mediatek: paris: Fix "argument" argument type for mtk_pinconf_get()

[ Upstream commit 19bce7ce0a593c7024030a0cda9e23facea3c93d ]

For mtk_pinconf_get(), the "argument" argument is typically returned by
pinconf_to_config_argument(), which holds the value for a given pinconf
parameter. It certainly should not have the type of "enum pin_config_param",
which describes the type of the pinconf parameter itself.

Change the type to u32, which matches the return type of
pinconf_to_config_argument().

Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-4-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agopinctrl: mediatek: paris: Fix PIN_CONFIG_BIAS_* readback
Chen-Yu Tsai [Tue, 8 Mar 2022 10:09:47 +0000 (18:09 +0800)]
pinctrl: mediatek: paris: Fix PIN_CONFIG_BIAS_* readback

[ Upstream commit 3e8c6bc608480010f360c4a59578d7841726137d ]

When reading back pin bias settings, if the pin is not in the
corresponding bias state, the function should return -EINVAL.

Fix this in the mediatek-paris pinctrl library so that the read back
state is not littered with bogus a "input bias disabled" combined with
"pull up" or "pull down" states.

Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-3-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agopinctrl: mediatek: Fix missing of_node_put() in mtk_pctrl_init
Miaoqian Lin [Tue, 8 Mar 2022 07:11:54 +0000 (07:11 +0000)]
pinctrl: mediatek: Fix missing of_node_put() in mtk_pctrl_init

[ Upstream commit dab4df9ca919f59e5b9dd84385eaf34d4f20dbb0 ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

Fixes: a6df410d420a ("pinctrl: mediatek: Add Pinctrl/GPIO driver for mt8135.")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308071155.21114-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agostaging: mt7621-dts: fix GB-PC2 devicetree
Arınç ÜNAL [Fri, 11 Mar 2022 09:03:20 +0000 (12:03 +0300)]
staging: mt7621-dts: fix GB-PC2 devicetree

[ Upstream commit 5bc148649cf358d0cccf525452a4efbd4bc89a0f ]

Fix the GB-PC2 devicetree. Refer to the schematics of the device for more
information.

GB-PC2 devicetree fixes:
- Include mt7621.dtsi instead of gbpc1.dts. Add the missing definitions.
- Remove gpio-leds node as the system LED is not wired to anywhere on
the board and the power LED is directly wired to GND.
- Remove uart3 pin group from gpio-pinmux node as it's not used as GPIO.
- Use reg 7 for the external phy to be on par with
Documentation/devicetree/bindings/net/dsa/mt7530.txt.
- Use the status value "okay".

Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC2_V1.1_schematic.pdf
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220311090320.3068-2-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agostaging: mt7621-dts: fix pinctrl properties for ethernet
Arınç ÜNAL [Tue, 25 Jan 2022 15:39:03 +0000 (18:39 +0300)]
staging: mt7621-dts: fix pinctrl properties for ethernet

[ Upstream commit 0a93c0d75809582893e82039143591b9265b520e ]

Add pinctrl properties with rgmii1 & mdio pins under ethernet node which
was wrongfully put under an external phy node.
GMAC1 will start working with this fix.

Link: https://lore.kernel.org/netdev/02ecce91-7aad-4392-c9d7-f45ca1b31e0b@arinc9.com/T/
Move GB-PC2 specific phy_external node to its own device tree.

Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220125153903.1469-5-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agostaging: mt7621-dts: fix formatting
Arınç ÜNAL [Tue, 25 Jan 2022 15:39:00 +0000 (18:39 +0300)]
staging: mt7621-dts: fix formatting

[ Upstream commit 7eeec44d33f6be7caca4fe9ca4e653cf315a36c1 ]

Fix formatting on mt7621.dtsi.

Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220125153903.1469-2-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agostaging: mt7621-dts: fix LEDs and pinctrl on GB-PC1 devicetree
Arınç ÜNAL [Fri, 11 Mar 2022 09:03:19 +0000 (12:03 +0300)]
staging: mt7621-dts: fix LEDs and pinctrl on GB-PC1 devicetree

[ Upstream commit 6256e18686158fa49e019297f990f1c1817aabf1 ]

Fix LED and pinctrl definitions on the GB-PC1 devicetree. Refer to the
schematics of the device for more information.

LED fixes:
- Change GPIO6 LED label from system to power as GPIO6 is connected to
PLED.
- Add default-on default-trigger to power LED.
- Change GPIO8 LED label from status to system as GPIO8 is connected to
SYS_LED.
- Add disk-activity default-trigger to system LED.
- Switch to the color:function naming scheme.
- Remove lan1 and lan2 LEDs as they don't exist.

Pinctrl fixes:
- Claim state_default node under pinctrl node.
- Change pinctrl0 node name to state-default.
- Change gpio node name to gpio-pinmux to respect
Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml.
- Sort pin groups alphabetically.

Misc fixes:
- Fix formatting.
- Use the status value "okay".
- Define hexadecimal addresses in lower case.
- Make hexadecimal addresses for memory easier to read.

Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC1_V1.0_Schematic.pdf
Tested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220311090320.3068-1-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoNFS: remove unneeded check in decode_devicenotify_args()
Alexey Khoroshilov [Tue, 15 Feb 2022 10:17:04 +0000 (13:17 +0300)]
NFS: remove unneeded check in decode_devicenotify_args()

[ Upstream commit cb8fac6d2727f79f211e745b16c9abbf4d8be652 ]

[You don't often get email from khoroshilov@ispras.ru. Learn why this is important at http://aka.ms/LearnAboutSenderIdentification.]

Overflow check in not needed anymore after we switch to kmalloc_array().

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: a4f743a6bb20 ("NFSv4.1: Convert open-coded array allocation calls to kmalloc_array()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agomailbox: imx: fix crash in resume on i.mx8ulp
Robin Gong [Mon, 7 Feb 2022 01:52:07 +0000 (09:52 +0800)]
mailbox: imx: fix crash in resume on i.mx8ulp

[ Upstream commit 8219efd08a0aa1d7944bdb66d84ba57549258968 ]

check 'priv->clk' before 'imx_mu_read()' otherwise crash happens on
i.mx8ulp, since clock not enabled.

Fixes: 4f0b776ef5831 ("mailbox: imx-mailbox: support i.MX8ULP MU")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoclk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver
Miaoqian Lin [Wed, 12 Jan 2022 10:45:01 +0000 (10:45 +0000)]
clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver

[ Upstream commit 6d6ef58c2470da85a99119f74d34216c8074b9f0 ]

The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.

Fixes: 2db04f16b589 ("clk: tegra: Add EMC clock driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220112104501.30655-1-linmq006@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoclk: Fix clk_hw_get_clk() when dev is NULL
Maxime Ripard [Fri, 25 Feb 2022 14:35:23 +0000 (15:35 +0100)]
clk: Fix clk_hw_get_clk() when dev is NULL

[ Upstream commit 0c1b56df451716ba207bbf59f303473643eee4fd ]

Any registered clk_core structure can have a NULL pointer in its dev
field. While never actually documented, this is evidenced by the wide
usage of clk_register and clk_hw_register with a NULL device pointer,
and the fact that the core of_clk_hw_register() function also passes a
NULL device pointer.

A call to clk_hw_get_clk() on a clk_hw struct whose clk_core is in that
case will result in a NULL pointer derefence when it calls dev_name() on
that NULL device pointer.

Add a test for this case and use NULL as the dev_id if the device
pointer is NULL.

Fixes: 30d6f8c15d2c ("clk: add api to get clk consumer from clk_hw")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220225143534.405820-2-maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoclk: clps711x: Terminate clk_div_table with sentinel element
Jonathan Neuschäfer [Fri, 18 Feb 2022 00:09:20 +0000 (01:09 +0100)]
clk: clps711x: Terminate clk_div_table with sentinel element

[ Upstream commit 8bed4ed5aa3431085d9d27afc35d684856460eda ]

In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).

Fixes: 631c53478973d ("clk: Add CLPS711X clk driver")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220218000922.134857-5-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoclk: hisilicon: Terminate clk_div_table with sentinel element
Jonathan Neuschäfer [Fri, 18 Feb 2022 00:09:19 +0000 (01:09 +0100)]
clk: hisilicon: Terminate clk_div_table with sentinel element

[ Upstream commit 113b261bdf2b4fd34e7769a147a7acd0a4d9137f ]

In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).

Fixes: 6c81966107dc0 ("clk: hisilicon: Add clock driver for hi3559A SoC")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220218000922.134857-4-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoclk: loongson1: Terminate clk_div_table with sentinel element
Jonathan Neuschäfer [Fri, 18 Feb 2022 00:09:18 +0000 (01:09 +0100)]
clk: loongson1: Terminate clk_div_table with sentinel element

[ Upstream commit 3eb00f89162e80083dfcaa842468b510462cfeaa ]

In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).

Fixes: b4626a7f4892 ("CLK: Add Loongson1C clock support")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Link: https://lore.kernel.org/r/20220218000922.134857-3-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoclk: actions: Terminate clk_div_table with sentinel element
Jonathan Neuschäfer [Fri, 18 Feb 2022 00:09:17 +0000 (01:09 +0100)]
clk: actions: Terminate clk_div_table with sentinel element

[ Upstream commit d8a441e53e2434b1401e52dfd66b05263e442edc ]

In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).

In owl-s900.s, the { 0, 8 } element was probably meant to be just that,
so this patch changes { 0, 8 } to { 0, 0 }.

Fixes: d47317ca4ade1 ("clk: actions: Add S700 SoC clock support")
Fixes: d85d20053e195 ("clk: actions: Add S900 SoC clock support")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220218000922.134857-2-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agonvdimm/region: Fix default alignment for small regions
Dan Williams [Thu, 10 Mar 2022 03:49:21 +0000 (19:49 -0800)]
nvdimm/region: Fix default alignment for small regions

[ Upstream commit d9d290d7e659e9db3e4518040cc18b97f5535f4a ]

In preparation for removing BLK aperture support the NVDIMM unit tests
discovered that the default alignment can be set higher than the
capacity of the region. Fall back to PAGE_SIZE in that case.

Given this has not been seen in the wild, elide notifying -stable.

Fixes: 2522afb86a8c ("libnvdimm/region: Introduce an 'align' attribute")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/164688416128.2879318.17890707310125575258.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoremoteproc: qcom_q6v5_mss: Fix some leaks in q6v5_alloc_memory_region
Miaoqian Lin [Tue, 8 Mar 2022 06:45:21 +0000 (06:45 +0000)]
remoteproc: qcom_q6v5_mss: Fix some leaks in q6v5_alloc_memory_region

[ Upstream commit 07a5dcc4bed9d7cae54adf5aa10ff9f037a3204b ]

The device_node pointer is returned by of_parse_phandle() or
of_get_child_by_name() with refcount incremented.
We should use of_node_put() on it when done.

This function only call of_node_put(node) when of_address_to_resource
succeeds, missing error cases.

Fixes: 278d744c46fd ("remoteproc: qcom: Fix potential device node leaks")
Fixes: 051fb70fd4ea ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308064522.13804-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoremoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region
Miaoqian Lin [Tue, 8 Mar 2022 06:31:02 +0000 (06:31 +0000)]
remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region

[ Upstream commit 8f90161a66bc3d6b9fe8dde4d9028d20eae1b62a ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

Fixes: aed361adca9f ("remoteproc: qcom: Introduce WCNSS peripheral image loader")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308063102.10049-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoremoteproc: qcom: Fix missing of_node_put in adsp_alloc_memory_region
Miaoqian Lin [Tue, 8 Mar 2022 03:12:19 +0000 (03:12 +0000)]
remoteproc: qcom: Fix missing of_node_put in adsp_alloc_memory_region

[ Upstream commit 505b5b1616e200042999de715dbe7c1e2735cd65 ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

Fixes: dc160e449122 ("remoteproc: qcom: Introduce Non-PAS ADSP PIL driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308031219.4718-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodmaengine: hisi_dma: fix MSI allocate fail when reload hisi_dma
Jie Hai [Wed, 16 Feb 2022 07:21:01 +0000 (15:21 +0800)]
dmaengine: hisi_dma: fix MSI allocate fail when reload hisi_dma

[ Upstream commit b95044b38425f563404234d96bbb20cc6360c7e1 ]

Remove the loaded hisi_dma driver and reload it, the driver fails
to work properly. The following error is reported in the kernel log:

[ 1475.597609] hisi_dma 0000:7b:00.0: Failed to allocate MSI vectors!
[ 1475.604915] hisi_dma: probe of 0000:7b:00.0 failed with error -28

As noted in "The MSI Driver Guide HOWTO"[1], the number of MSI
interrupt must be a power of two. The Kunpeng DMA driver allocates 30
MSI interrupts. As a result, no space left on device is reported
when the driver is reloaded and allocates interrupt vectors from the
interrupt domain.

This patch changes the number of interrupt vectors allocated by
hisi_dma driver to 32 to avoid this problem.

[1] https://www.kernel.org/doc/html/latest/PCI/msi-howto.html

Fixes: e9f08b65250d ("dmaengine: hisilicon: Add Kunpeng DMA engine support")

Signed-off-by: Jie Hai <haijie1@huawei.com>
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/20220216072101.34473-1-haijie1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoclk: qcom: clk-rcg2: Update the frac table for pixel clock
Taniya Das [Sun, 27 Feb 2022 17:55:36 +0000 (23:25 +0530)]
clk: qcom: clk-rcg2: Update the frac table for pixel clock

[ Upstream commit b527358cb4cd58a8279c9062b0786f1fab628fdc ]

Support the new numerator and denominator for pixel clock on SM8350 and
support rgb101010, RGB888 use cases on SM8450.

Fixes: 99cbd064b059f ("clk: qcom: Support display RCG clocks")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220227175536.3131-2-tdas@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoclk: qcom: clk-rcg2: Update logic to calculate D value for RCG
Taniya Das [Sun, 27 Feb 2022 17:55:35 +0000 (23:25 +0530)]
clk: qcom: clk-rcg2: Update logic to calculate D value for RCG

[ Upstream commit 58922910add18583d5273c2edcdb9fd7bf4eca02 ]

The display pixel clock has a requirement on certain newer platforms to
support M/N as (2/3) and the final D value calculated results in
underflow errors.
As the current implementation does not check for D value is within
the accepted range for a given M & N value. Update the logic to
calculate the final D value based on the range.

Fixes: 99cbd064b059f ("clk: qcom: Support display RCG clocks")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220227175536.3131-1-tdas@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoclk: at91: sama7g5: fix parents of PDMCs' GCLK
Codrin Ciubotariu [Fri, 4 Mar 2022 18:26:16 +0000 (20:26 +0200)]
clk: at91: sama7g5: fix parents of PDMCs' GCLK

[ Upstream commit 1a944729d8635fa59638f24e8727d5ccaa0c8c19 ]

Audio PLL can be used as parent by the GCLKs of PDMCs.

Fixes: cb783bbbcf54 ("clk: at91: sama7g5: add clock support for sama7g5")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220304182616.1920392-1-codrin.ciubotariu@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoclk: imx: off by one in imx_lpcg_parse_clks_from_dt()
Dan Carpenter [Mon, 28 Feb 2022 07:50:14 +0000 (10:50 +0300)]
clk: imx: off by one in imx_lpcg_parse_clks_from_dt()

[ Upstream commit 135efc3a76d127691afaf1864e4ab627bf09d53d ]

The > needs to be >= to prevent an off by one access.

Fixes: d5f1e6a2bb61 ("clk: imx: imx8qxp-lpcg: add parsing clocks from device tree")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220228075014.GD13685@kili
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoclk: imx7d: Remove audio_mclk_root_clk
Abel Vesa [Thu, 27 Jan 2022 14:10:52 +0000 (16:10 +0200)]
clk: imx7d: Remove audio_mclk_root_clk

[ Upstream commit eccac77ede3946c90143447cdc785dc16aec4b24 ]

The audio_mclk_root_clk was added as a gate with the CCGR121 (0x4790),
but according to the reference manual, there is no such gate. The
CCGR121 belongs to ECSPI2 and it is not shared.

Fixes: 8f6d8094b215b57 ("ARM: imx: add imx7d clk tree support")
Reported-by: David Wolfe <david.wolfe@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220127141052.1900174-2-abel.vesa@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agodma-debug: fix return value of __setup handlers
Randy Dunlap [Mon, 28 Feb 2022 22:04:53 +0000 (14:04 -0800)]
dma-debug: fix return value of __setup handlers

[ Upstream commit 80e4390981618e290616dbd06ea190d4576f219d ]

When valid kernel command line parameters
  dma_debug=off dma_debug_entries=100
are used, they are reported as Unknown parameters and added to init's
environment strings, polluting it.

  Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5
    dma_debug=off dma_debug_entries=100", will be passed to user space.

and

 Run /sbin/init as init process
   with arguments:
     /sbin/init
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc5
     dma_debug=off
     dma_debug_entries=100

Return 1 from these __setup handlers to indicate that the command line
option has been handled.

Fixes: 59d3daafa1726 ("dma-debug: add kernel command line parameters")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: iommu@lists.linux-foundation.org
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agostaging: r8188eu: fix endless loop in recv_func
Martin Kaiser [Sat, 26 Feb 2022 18:14:53 +0000 (19:14 +0100)]
staging: r8188eu: fix endless loop in recv_func

[ Upstream commit 1327fcf175fa63d3b7a058b8148ed7714acdc035 ]

Fix an endless loop in recv_func. If pending_frame is not NULL, we're
stuck in the while loop forever. We have to call rtw_alloc_recvframe
each time we loop.

Fixes: 15865124feed ("staging: r8188eu: introduce new core dir for RTL8188eu driver")
Reported-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220226181457.1138035-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agoNFS: Return valid errors from nfs2/3_decode_dirent()
Trond Myklebust [Thu, 24 Feb 2022 15:59:37 +0000 (10:59 -0500)]
NFS: Return valid errors from nfs2/3_decode_dirent()

[ Upstream commit 64cfca85bacde54caa64e0ab855c48734894fa37 ]

Valid return values for decode_dirent() callback functions are:
 0: Success
 -EBADCOOKIE: End of directory
 -EAGAIN: End of xdr_stream

All errors need to map into one of those three values.

Fixes: 573c4e1ef53a ("NFS: Simplify ->decode_dirent() calling sequence")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2 years agohabanalabs: Add check for pci_enable_device
Jiasheng Jiang [Thu, 24 Feb 2022 06:58:05 +0000 (14:58 +0800)]
habanalabs: Add check for pci_enable_device

[ Upstream commit 9c27896ac1bb83ea5c461ce6f7089d02102a2b21 ]

As the potential failure of the pci_enable_device(),
it should be better to check the return value and return
error if fails.

Fixes: 70b2f993ea4a ("habanalabs: create common folder")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>