Athira Rajeev [Fri, 17 Jul 2020 14:38:21 +0000 (10:38 -0400)]
powerpc/perf: Ignore the BHRB kernel address filtering for P10
Commit
bb19af816025 ("powerpc/perf: Prevent kernel address leak to
userspace via BHRB buffer") added a check in bhrb_read() to filter
the kernel address from BHRB buffer. This patch modified it to avoid
that check for PowerISA v3.1 based processors, since PowerISA v3.1
allows only MSR[PR]=1 address to be written to BHRB buffer.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-10-git-send-email-atrajeev@linux.vnet.ibm.com
Athira Rajeev [Fri, 17 Jul 2020 14:38:20 +0000 (10:38 -0400)]
powerpc/perf: power10 Performance Monitoring support
Base enablement patch to register performance monitoring hardware
support for power10. Patch introduce the raw event encoding format,
defines the supported list of events, config fields for the event
attributes and their corresponding bit values which are exported via
sysfs.
Patch also enhances the support function in isa207_common.c to include
power10 pmu hardware.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-9-git-send-email-atrajeev@linux.vnet.ibm.com
Madhavan Srinivasan [Fri, 17 Jul 2020 14:38:19 +0000 (10:38 -0400)]
powerpc/perf: Add Power10 PMU feature to DT CPU features
Add Power10 feature function to DT CPU features, along with a Power10
specific init() to initialize PMU SPRs, sets the oprofile_cpu_type and
cpu_features. This will enable performance monitoring unit (PMU) for
Power10 in CPU features with "performance-monitor-power10".
For Power ISA v3.1, BHRB disable is controlled via Monitor Mode
Control Register A (MMCRA) bit, namely "BHRB Recording
Disable (BHRBRD)". This patch initializes MMCRA BHRBRD to disable BHRB
feature at boot for Power10.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Move MMCRA_BHRB_DISABLE as noted by jpn, drop CPU setup changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-8-git-send-email-atrajeev@linux.vnet.ibm.com
Madhavan Srinivasan [Fri, 17 Jul 2020 14:38:18 +0000 (10:38 -0400)]
powerpc/xmon: Add PowerISA v3.1 PMU SPRs
PowerISA v3.1 added three new perfromance
monitoring unit (PMU) speical purpose register (SPR).
They are Monitor Mode Control Register 3 (MMCR3),
Sampled Instruction Event Register 2 (SIER2),
Sampled Instruction Event Register 3 (SIER3).
Patch here adds a new dump function dump_310_sprs
to print these SPR values.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-7-git-send-email-atrajeev@linux.vnet.ibm.com
Athira Rajeev [Fri, 17 Jul 2020 14:38:17 +0000 (10:38 -0400)]
KVM: PPC: Book3S HV: Save/restore new PMU registers
Power ISA v3.1 has added new performance monitoring unit (PMU) special
purpose registers (SPRs). They are:
Monitor Mode Control Register 3 (MMCR3)
Sampled Instruction Event Register A (SIER2)
Sampled Instruction Event Register B (SIER3)
Add support to save/restore these new SPRs while entering/exiting
guest. Also include changes to support KVM_REG_PPC_MMCR3/SIER2/SIER3.
Add new SPRs to KVM API documentation.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-6-git-send-email-atrajeev@linux.vnet.ibm.com
Madhavan Srinivasan [Fri, 17 Jul 2020 14:38:16 +0000 (10:38 -0400)]
powerpc/perf: Add support for ISA3.1 PMU SPRs
PowerISA v3.1 includes new performance monitoring unit(PMU)
special purpose registers (SPRs). They are
Monitor Mode Control Register 3 (MMCR3)
Sampled Instruction Event Register 2 (SIER2)
Sampled Instruction Event Register 3 (SIER3)
MMCR3 is added for further sampling related configuration
control. SIER2/SIER3 are added to provide additional
information about the sampled instruction.
Patch adds new PPMU flag called "PPMU_ARCH_31" to support handling of
these new SPRs, updates the struct thread_struct to include these new
SPRs, include MMCR3 in struct mmcr_regs. This is needed to support
programming of MMCR3 SPR during event_enable/disable. Patch also adds
the sysfs support for the MMCR3 SPR along with SPRN_ macros for these
new pmu SPRs.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Rename to PPMU_ARCH_31 as noted by jpn]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-5-git-send-email-atrajeev@linux.vnet.ibm.com
Athira Rajeev [Fri, 17 Jul 2020 14:38:15 +0000 (10:38 -0400)]
powerpc/perf: Update Power PMU cache_events to u64 type
Events of type PERF_TYPE_HW_CACHE was described for Power PMU
as: int (*cache_events)[type][op][result];
where type, op, result values unpacked from the event attribute config
value is used to generate the raw event code at runtime.
So far the event code values which used to create these cache-related
events were within 32 bit and `int` type worked. In power10,
some of the event codes are of 64-bit value and hence update the
Power PMU cache_events to `u64` type in `power_pmu` struct.
Also propagate this change to existing all PMU driver code paths
which are using ppmu->cache_events.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-4-git-send-email-atrajeev@linux.vnet.ibm.com
Athira Rajeev [Fri, 17 Jul 2020 14:38:14 +0000 (10:38 -0400)]
KVM: PPC: Book3S HV: Cleanup updates for kvm vcpu MMCR
Currently `kvm_vcpu_arch` stores all Monitor Mode Control registers
in a flat array in order: mmcr0, mmcr1, mmcra, mmcr2, mmcrs
Split this to give mmcra and mmcrs its own entries in vcpu and
use a flat array for mmcr0 to mmcr2. This patch implements this
cleanup to make code easier to read.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Fix MMCRA/MMCR2 uapi breakage as noted by paulus]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-3-git-send-email-atrajeev@linux.vnet.ibm.com
Athira Rajeev [Fri, 17 Jul 2020 14:38:13 +0000 (10:38 -0400)]
powerpc/perf: Update cpu_hw_event to use `struct` for storing MMCR registers
core-book3s currently uses array to store the MMCR registers as part
of per-cpu `cpu_hw_events`. This patch does a clean up to use `struct`
to store mmcr regs instead of array. This will make code easier to read
and reduces chance of any subtle bug that may come in the future, say
when new registers are added. Patch updates all relevant code that was
using MMCR array ( cpuhw->mmcr[x]) to use newly introduced `struct`.
This includes the PMU driver code for supported platforms (power5
to power9) and ISA macros for counter support functions.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-2-git-send-email-atrajeev@linux.vnet.ibm.com
Madhavan Srinivasan [Sun, 14 Jun 2020 08:36:04 +0000 (14:06 +0530)]
powerpc/perf: Fix missing is_sier_aviable() during build
Compilation error:
arch/powerpc/perf/perf_regs.c:80:undefined reference to `.is_sier_available'
Currently is_sier_available() is part of core-book3s.c, which is added
to build based on CONFIG_PPC_PERF_CTRS.
A config with CONFIG_PERF_EVENTS and without CONFIG_PPC_PERF_CTRS will
have a build break because of missing is_sier_available().
In practice it only breaks when CONFIG_FSL_EMB_PERF_EVENT=n because
that also guards the usage of is_sier_available(). That only happens
with CONFIG_PPC_BOOK3E_64=y and CONFIG_FSL_SOC_BOOKE=n.
Patch adds is_sier_available() in asm/perf_event.h to fix the build
break for configs missing CONFIG_PPC_PERF_CTRS.
Fixes:
333804dc3b7a ("powerpc/perf: Update perf_regs structure to include SIER")
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Add detail about CONFIG_FSL_SOC_BOOKE]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200614083604.302611-1-maddy@linux.ibm.com
Nicholas Piggin [Fri, 3 Jul 2020 01:19:58 +0000 (11:19 +1000)]
powerpc/64s/hash: Disable subpage_prot syscall by default
The subpage_prot syscall was added for specialised system software
(Lx86) that has been discontinued for about 7 years, and is not thought
to be used elsewhere, so disable it by default.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703011958.1166620-4-npiggin@gmail.com
Nicholas Piggin [Fri, 3 Jul 2020 01:19:57 +0000 (11:19 +1000)]
powerpc/64s: Remove PROT_SAO support
ISA v3.1 does not support the SAO storage control attribute required to
implement PROT_SAO. PROT_SAO was used by specialised system software
(Lx86) that has been discontinued for about 7 years, and is not thought
to be used elsewhere, so removal should not cause problems.
We rather remove it than keep support for older processors, because
live migrating guest partitions to newer processors may not be possible
if SAO is in use (or worse allowed with silent races).
- PROT_SAO stays in the uapi header so code using it would still build.
- arch_validate_prot() is removed, the generic version rejects PROT_SAO
so applications would get a failure at mmap() time.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Drop KVM change for the time being]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703011958.1166620-3-npiggin@gmail.com
Nicholas Piggin [Fri, 3 Jul 2020 01:19:56 +0000 (11:19 +1000)]
powerpc: Remove stale calc_vm_prot_bits() comment
This comment is wrong, we wouldn't use calc_vm_prot_bits() here
because we are being called by calc_vm_prot_bits() to modify its
behaviour.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703011958.1166620-2-npiggin@gmail.com
YueHaibing [Fri, 17 Jul 2020 11:27:14 +0000 (19:27 +0800)]
powerpc: Remove unneeded inline functions
Both of those functions are only called from 64-bit only code, so the
stubs should not be needed at all.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200717112714.19304-1-yuehaibing@huawei.com
Alexander A. Klimov [Fri, 17 Jul 2020 18:29:40 +0000 (20:29 +0200)]
macintosh/therm_adt746x: Replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200717182940.75484-1-grandmaster@al2klimov.de
Alexander A. Klimov [Fri, 17 Jul 2020 18:35:22 +0000 (20:35 +0200)]
macintosh/adb: Replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200717183522.77605-1-grandmaster@al2klimov.de
Alexander A. Klimov [Sat, 18 Jul 2020 10:39:58 +0000 (12:39 +0200)]
powerpc: Replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200718103958.5455-1-grandmaster@al2klimov.de
Michael Ellerman [Fri, 8 May 2020 13:06:33 +0000 (23:06 +1000)]
powerpc/spufs: Rework fcheck() usage
Currently the spu coredump code triggers an RCU warning:
=============================
WARNING: suspicious RCU usage
5.7.0-rc3-01755-g7cd49f0b7ec7 #1 Not tainted
-----------------------------
include/linux/fdtable.h:95 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by spu-coredump/1343:
#0:
c0000007fa22f430 (sb_writers#2){.+.+}-{0:0}, at: .do_coredump+0x1010/0x13c8
stack backtrace:
CPU: 0 PID: 1343 Comm: spu-coredump Not tainted 5.7.0-rc3-01755-g7cd49f0b7ec7 #1
Call Trace:
.dump_stack+0xec/0x15c (unreliable)
.lockdep_rcu_suspicious+0x120/0x144
.coredump_next_context+0x148/0x158
.spufs_coredump_extra_notes_size+0x54/0x190
.elf_coredump_extra_notes_size+0x34/0x50
.elf_core_dump+0xe48/0x19d0
.do_coredump+0xe50/0x13c8
.get_signal+0x864/0xd88
.do_notify_resume+0x158/0x3c8
.interrupt_exit_user_prepare+0x19c/0x208
interrupt_return+0x14/0x1c0
This comes from fcheck_files() via fcheck().
It's pretty clearly documented that fcheck() must be wrapped with
rcu_read_lock(), adding that fixes the RCU warning.
hch points out that once we've released the RCU read lock the file may
be closed and freed, which would leave us with a pointer to a freed
spu_context.
To avoid that, take a reference to the spu_context while we hold the
RCU read lock, and drop that reference later once we're done with the
context.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200508130633.2532759-1-mpe@ellerman.id.au
Michael Ellerman [Thu, 16 Jul 2020 12:21:42 +0000 (22:21 +1000)]
selftests/powerpc: Run per_event_excludes test on Power8 or later
The per_event_excludes test wants to run on Power8 or later. But
currently it checks that AT_BASE_PLATFORM *equals* power8, which means
it only runs on Power8.
Fix it to check for the ISA 2.07 feature, which will be set on Power8
and later CPUs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200716122142.3776261-1-mpe@ellerman.id.au
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:46 +0000 (08:59 +0530)]
powerpc/book3s64/pkeys: Remove is_pkey_enabled()
There is only one caller to this function and the function is wrongly
named. Avoid further confusion w.r.t name and open code this at the
only call site. Also remove read_uamor(). There are no users for
the same after this.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-24-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:45 +0000 (08:59 +0530)]
selftests/powerpc: ptrace-pkey: Don't update expected UAMOR value
With commit
4a4a5e5d2aad ("powerpc/pkeys: key allocation/deallocation
must not change pkey registers") we are not updating UAMOR on key
allocation. So don't update the expected uamor value in the test.
Fixes:
4a4a5e5d2aad ("powerpc/pkeys: key allocation/deallocation must not change pkey registers")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-23-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:44 +0000 (08:59 +0530)]
selftests/powerpc: ptrace-pkey: Update the test to mark an invalid pkey correctly
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-22-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:43 +0000 (08:59 +0530)]
selftests/powerpc: ptrace-pkey: Rename variables to make it easier to follow code
Rename variable to indicate that they are invalid values which we will
use to test ptrace update of pkeys.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-21-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:42 +0000 (08:59 +0530)]
powerpc/book3s64/kuap: Move UAMOR setup to key init function
UAMOR values are not application-specific. The kernel initializes
its value based on different reserved keys. Remove the thread-specific
UAMOR value and don't switch the UAMOR on context switch.
Move UAMOR initialization to key initialization code and remove
thread_struct.uamor because it is not used anymore.
Before commit:
4a4a5e5d2aad ("powerpc/pkeys: key allocation/deallocation must not change pkey registers")
we used to update uamor based on key allocation and free.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-20-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:41 +0000 (08:59 +0530)]
powerpc/book3s64/keys/kuap: Reset AMR/IAMR values on kexec
As we kexec across kernels that use AMR/IAMR for different purposes
we need to ensure that new kernels get kexec'd with a reset value
of AMR/IAMR. For ex: the new kernel can use key 0 for kernel mapping and the old
AMR value prevents access to key 0.
This patch also removes reset if IAMR and AMOR in kexec_sequence. Reset of AMOR
is not needed and the IAMR reset is partial (it doesn't do the reset
on secondary cpus) and is redundant with this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-19-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:40 +0000 (08:59 +0530)]
powerpc/book3s64/keys: Print information during boot.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-18-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:39 +0000 (08:59 +0530)]
powerpc/book3s64/pkeys: Use MMU_FTR_PKEY instead of pkey_disabled static key
Instead of pkey_disabled static key use mmu feature MMU_FTR_PKEY.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-17-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:38 +0000 (08:59 +0530)]
powerpc/book3s64/pkeys: Use pkey_execute_disable_supported
Use pkey_execute_disable_supported to check for execute key support instead
of pkey_disabled.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-16-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:37 +0000 (08:59 +0530)]
powerpc/book3s64/kuep: Add MMU_FTR_KUEP
This will be used to enable/disable Kernel Userspace Execution
Prevention (KUEP).
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-15-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:36 +0000 (08:59 +0530)]
powerpc/book3s64/pkeys: Add MMU_FTR_PKEY
Parse storage keys related device tree entry in early_init_devtree
and enable MMU feature MMU_FTR_PKEY if pkeys are supported.
MMU feature is used instead of CPU feature because this enables us
to group MMU_FTR_KUAP and MMU_FTR_PKEY in asm feature fixup code.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-14-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:35 +0000 (08:59 +0530)]
powerpc/book3s64/pkeys: Mark all the pkeys above max pkey as reserved
The hypervisor can return less than max allowed pkey (for ex: 31) instead
of 32. We should mark all the pkeys above max allowed as reserved so
that we avoid the allocation of the wrong pkey(for ex: key 31 in the above
case) by userspace.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-13-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:34 +0000 (08:59 +0530)]
powerpc/book3s64/pkeys: Make initial_allocation_mask static
initial_allocation_mask is not used outside this file.
Also mark reserved_allocation_mask and initial_allocation_mask __ro_after_init;
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-12-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:33 +0000 (08:59 +0530)]
powerpc/book3s64/pkeys: Convert pkey_total to num_pkey
num_pkey now represents max number of keys supported such that we return
to userspace 0 - num_pkey - 1.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-11-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:32 +0000 (08:59 +0530)]
powerpc/book3s64/pkeys: Simplify pkey disable branch
Make the default value FALSE (pkey enabled) and set to TRUE when we
find the total number of keys supported to be zero.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-10-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:31 +0000 (08:59 +0530)]
powerpc/book3s64/pkeys: kill cpu feature key CPU_FTR_PKEY
We don't use CPU_FTR_PKEY anymore. Remove the feature bit and mark it
free.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-9-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:30 +0000 (08:59 +0530)]
powerpc/book3s64/pkeys: Prevent key 1 modification from userspace.
Key 1 is marked reserved by ISA. Setup uamor to prevent userspace modification
of the same.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-8-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:29 +0000 (08:59 +0530)]
powerpc/book3s64/pkeys: Simplify the key initialization
Add documentation explaining the execute_only_key. The reservation and initialization mask
details are also explained in this patch.
No functional change in this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-7-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:28 +0000 (08:59 +0530)]
powerpc/book3s64/pkeys: Explain key 1 reservation details
This explains the details w.r.t key 1.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-6-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:27 +0000 (08:59 +0530)]
powerpc/book3s64/pkeys: Move pkey related bits in the linux page table
To keep things simple, all the pkey related bits are kept together
in linux page table for 64K config with hash translation. With hash-4k
kernel requires 4 bits to store slots details. This is done by overloading
some of the RPN bits for storing the slot details. Due to this PKEY_BIT0 on
the 4K config is used for storing hash slot details.
64K before
|....|RSV1| RSV2| RSV3 | RSV4 | RPN44| RPN43 |.... | RSV5|
|....| P4 | P3 | P2 | P1 | Busy | HASHPTE |.... | P0 |
after
|....|RSV1| RSV2| RSV3 | RSV4 | RPN44 | RPN43 |.... | RSV5 |
|....| P4 | P3 | P2 | P1 | P0 | HASHPTE |.... | Busy |
4k before
|....| RSV1 | RSV2 | RSV3 | RSV4 | RPN44| RPN43.... | RSV5|
|....| Busy | HASHPTE | P2 | P1 | F_SEC| F_GIX.... | P0 |
after
|....| RSV1 | RSV2| RSV3 | RSV4 | Free | RPN43.... | RSV5 |
|....| HASHPTE | P2 | P1 | P0 | F_SEC| F_GIX.... | BUSY |
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-5-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:26 +0000 (08:59 +0530)]
powerpc/book3s64/pkeys: pkeys are supported only on hash on book3s.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-4-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:25 +0000 (08:59 +0530)]
powerpc/book3s64/pkeys: Fixup bit numbering
This number the pkey bit such that it is easy to follow. PKEY_BIT0 is
the lower order bit. This makes further changes easy to follow.
No functional change in this patch other than linux page table for
hash translation now maps pkeys differently.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-3-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 03:29:24 +0000 (08:59 +0530)]
powerpc/book3s64/pkeys: Use PVR check instead of cpu feature
We are wrongly using CPU_FTRS_POWER8 to check for P8 support. Instead, we should
use PVR value. Now considering we are using CPU_FTRS_POWER8, that
implies we returned true for P9 with older firmware. Keep the same behavior
by checking for P9 PVR value.
Fixes:
cf43d3b26452 ("powerpc: Enable pkey subsystem")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-2-aneesh.kumar@linux.ibm.com
Santosh Sivaraj [Thu, 9 Jul 2020 13:51:42 +0000 (19:21 +0530)]
powerpc/papr/scm: Add bad memory ranges to nvdimm bad ranges
Subscribe to the MCE notification and add the physical address which
generated a memory error to nvdimm bad range.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709135142.721504-2-santosh@fossix.org
Santosh Sivaraj [Thu, 9 Jul 2020 13:51:41 +0000 (19:21 +0530)]
powerpc/mce: Add MCE notification chain
Introduce notification chain which lets us know about uncorrected memory
errors(UE). This would help prospective users in pmem or nvdimm subsystem
to track bad blocks for better handling of persistent memory allocations.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709135142.721504-1-santosh@fossix.org
Aneesh Kumar K.V [Thu, 9 Jul 2020 13:19:25 +0000 (18:49 +0530)]
powerpc/mm/radix: Create separate mappings for hot-plugged memory
To enable memory unplug without splitting kernel page table
mapping, we force the max mapping size to the LMB size. LMB
size is the unit in which hypervisor will do memory add/remove
operation.
Pseries systems supports max LMB size of 256MB. Hence on pseries,
we now end up mapping memory with 2M page size instead of 1G. To improve
that we want hypervisor to hint the kernel about the hotplug
memory range. That was added that as part of
commit
b6eca183e23e ("powerpc/kernel: Enables memory
hot-remove after reboot on pseries guests")
But PowerVM doesn't provide that hint yet. Once we get PowerVM
updated, we can then force the 2M mapping only to hot-pluggable
memory region using memblock_is_hotpluggable(). Till then
let's depend on LMB size for finding the mapping page size
for linear range.
With this change KVM guest will also be doing linear mapping with
2M page size.
The actual TLB benefit of mapping guest page table entries with
hugepage size can only be materialized if the partition scoped
entries are also using the same or higher page size. A guest using
1G hugetlbfs backing guest memory can have a performance impact with
the above change.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Fold in fix from Aneesh spotted by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com
Bharata B Rao [Thu, 9 Jul 2020 13:19:24 +0000 (18:49 +0530)]
powerpc/mm/radix: Remove split_kernel_mapping()
We split the page table mapping on memory unplug if the
linear range was mapped with huge page mapping (for ex: 1G)
The page table splitting code has a few issues:
1. Recursive locking
--------------------
Memory unplug path takes cpu_hotplug_lock and calls stop_machine()
for splitting the mappings. However stop_machine() takes
cpu_hotplug_lock again causing deadlock.
2. BUG: sleeping function called from in_atomic() context
---------------------------------------------------------
Memory unplug path (remove_pagetable) takes init_mm.page_table_lock
spinlock and later calls stop_machine() which does wait_for_completion()
3. Bad unlock unbalance
-----------------------
Memory unplug path takes init_mm.page_table_lock spinlock and calls
stop_machine(). The stop_machine thread function runs in a different
thread context (migration thread) which tries to release and reaquire
ptl. Releasing ptl from a different thread than which acquired it
causes bad unlock unbalance.
These problems can be avoided if we avoid mapping hot-plugged memory
with 1G mapping, thereby removing the need for splitting them during
unplug. The kernel always make sure the minimum unplug request is
SUBSECTION_SIZE for device memory and SECTION_SIZE for regular memory.
In preparation for such a change remove page table splitting support.
This essentially is a revert of
commit
4dd5f8a99e791 ("powerpc/mm/radix: Split linear mapping on hot-unplug")
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709131925.922266-4-aneesh.kumar@linux.ibm.com
Bharata B Rao [Thu, 9 Jul 2020 13:19:23 +0000 (18:49 +0530)]
powerpc/mm/radix: Free PUD table when freeing pagetable
remove_pagetable() isn't freeing PUD table. This causes memory
leak during memory unplug. Fix this.
Fixes:
4b5d62ca17a1 ("powerpc/mm: add radix__remove_section_mapping()")
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709131925.922266-3-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Thu, 9 Jul 2020 13:19:22 +0000 (18:49 +0530)]
powerpc/mm/radix: Fix PTE/PMD fragment count for early page table mappings
We can hit the following BUG_ON during memory unplug:
kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:342!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
NIP [
c000000000093308] pmd_fragment_free+0x48/0xc0
LR [
c00000000147bfec] remove_pagetable+0x578/0x60c
Call Trace:
0xc000008050000000 (unreliable)
remove_pagetable+0x384/0x60c
radix__remove_section_mapping+0x18/0x2c
remove_section_mapping+0x1c/0x3c
arch_remove_memory+0x11c/0x180
try_remove_memory+0x120/0x1b0
__remove_memory+0x20/0x40
dlpar_remove_lmb+0xc0/0x114
dlpar_memory+0x8b0/0xb20
handle_dlpar_errorlog+0xc0/0x190
pseries_hp_work_fn+0x2c/0x60
process_one_work+0x30c/0x810
worker_thread+0x98/0x540
kthread+0x1c4/0x1d0
ret_from_kernel_thread+0x5c/0x74
This occurs when unplug is attempted for such memory which has
been mapped using memblock pages as part of early kernel page
table setup. We wouldn't have initialized the PMD or PTE fragment
count for those PMD or PTE pages.
This can be fixed by allocating memory in PAGE_SIZE granularity
during early page table allocation. This makes sure a specific
page is not shared for another memblock allocation and we can
free them correctly on removing page-table pages.
Since we now do PAGE_SIZE allocations for both PUD table and
PMD table (Note that PTE table allocation is already of PAGE_SIZE),
we end up allocating more memory for the same amount of system RAM.
Here is a comparision of how much more we need for a 64T and 2G
system after this patch:
1. 64T system
-------------
64T RAM would need 64G for vmemmap with struct page size being 64B.
128 PUD tables for 64T memory (1G mappings)
1 PUD table and 64 PMD tables for 64G vmemmap (2M mappings)
With default PUD[PMD]_TABLE_SIZE(4K), (128+1+64)*4K=772K
With PAGE_SIZE(64K) table allocations, (128+1+64)*64K=12352K
2. 2G system
------------
2G RAM would need 2M for vmemmap with struct page size being 64B.
1 PUD table for 2G memory (1G mapping)
1 PUD table and 1 PMD table for 2M vmemmap (2M mappings)
With default PUD[PMD]_TABLE_SIZE(4K), (1+1+1)*4K=12K
With new PAGE_SIZE(64K) table allocations, (1+1+1)*64K=192K
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709131925.922266-2-aneesh.kumar@linux.ibm.com
Nicholas Piggin [Mon, 20 Jul 2020 04:42:58 +0000 (10:12 +0530)]
powerpc/prom: Enable Radix GTSE in cpu pa-features
When '
029ab30b4c0a ("powerpc/mm: Enable radix GTSE only if supported.")'
made GTSE an MMU feature, it was enabled by default in
powerpc-cpu-features but was missed in pa-features. This causes random
memory corruption during boot of PowerNV kernels where
CONFIG_PPC_DT_CPU_FTRS isn't enabled.
Fixes:
029ab30b4c0a ("powerpc/mm: Enable radix GTSE only if supported.")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[mpe: Unwrap long line]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200720044258.863574-1-bharata@linux.ibm.com
Michael Ellerman [Sat, 18 Jul 2020 12:43:55 +0000 (22:43 +1000)]
Merge branch 'fixes' into next
Merge our fixes branch, primarily to bring in the ebb selftests build
fix and the pkey fix, which is a dependency for some future work.
Nayna Jain [Wed, 15 Jul 2020 11:52:01 +0000 (07:52 -0400)]
powerpc/pseries: Detect secure and trusted boot state of the system.
The device-tree properties to check secure and trusted boot state are
different for guests (pseries) compared to baremetal (powernv).
This patch updates the existing is_ppc_secureboot_enabled() and
is_ppc_trustedboot_enabled() functions to add support for pseries.
For pseries the secureboot and trustedboot state are exposed via
device-tree properties /ibm,secure-boot and /ibm,trusted-boot.
The values of ibm,secure-boot under pseries are interpreted as:
0 - Disabled
1 - Enabled in Log-only mode. This patch interprets this value as
disabled, since audit mode is currently not supported for
Linux.
2 - Enabled and enforced.
3-9 - Enabled and enforcing; requirements are at the discretion of
the operating system.
The values of ibm,trusted-boot under pseries are interpreted as:
0 - Disabled
1 - Enabled
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
[mpe: Drop machdep.h inclusion, tweak change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594813921-12425-1-git-send-email-nayna@linux.ibm.com
Milton Miller [Wed, 15 Jul 2020 23:37:04 +0000 (09:37 +1000)]
powerpc/vdso: Fix vdso cpu truncation
The code in vdso_cpu_init that exposes the cpu and numa node to
userspace via SPRG_VDSO incorrctly masks the cpu to 12 bits. This means
that any kernel running on a box with more than 4096 threads (NR_CPUS
advertises a limit of of 8192 cpus) would expose userspace to two cpu
contexts running at the same time with the same cpu number.
Note: I'm not aware of any distro shipping a kernel with support for more
than 4096 threads today, nor of any system image that currently exceeds
4096 threads. Found via code browsing.
Fixes:
18ad51dd342a7eb09dbcd059d0b451b616d4dafc ("powerpc: Add VDSO version of getcpu")
Signed-off-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200715233704.1352257-1-anton@ozlabs.org
Anju T Sudhakar [Mon, 13 Jul 2020 14:46:23 +0000 (20:16 +0530)]
powerpc/perf: Add kernel support for new MSR[HV PR] bits in trace-imc
IMC trace-mode record has MSR[HV PR] bits added in the third DW.
These bits can be used to set the cpumode for the instruction pointer
captured in each sample.
Add support in kernel to use these bits to set the cpumode for
each sample.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713144623.508695-1-maddy@linux.ibm.com
Alexander A. Klimov [Mon, 13 Jul 2020 19:26:56 +0000 (21:26 +0200)]
powerpc/Kconfig: Replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713192656.37443-1-grandmaster@al2klimov.de
Alexander A. Klimov [Mon, 13 Jul 2020 17:55:06 +0000 (19:55 +0200)]
ocxl: Replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713175506.36676-1-grandmaster@al2klimov.de
Wei Yongjun [Tue, 14 Jul 2020 14:24:24 +0000 (22:24 +0800)]
cpuidle/pseries: Make symbol 'pseries_idle_driver' static
The sparse tool complains as follows:
drivers/cpuidle/cpuidle-pseries.c:25:23: warning:
symbol 'pseries_idle_driver' was not declared. Should it be static?
'pseries_idle_driver' is not used outside of this file, so marks
it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200714142424.66648-1-weiyongjun1@huawei.com
Anton Blanchard [Wed, 15 Jul 2020 00:08:20 +0000 (10:08 +1000)]
pseries: Fix 64 bit logical memory block panic
Booting with a 4GB LMB size causes us to panic:
qemu-system-ppc64: OS terminated: OS panic:
Memory block size not suitable: 0x0
Fix pseries_memory_block_size() to handle 64 bit LMBs.
Cc: stable@vger.kernel.org
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200715000820.1255764-1-anton@ozlabs.org
YueHaibing [Wed, 15 Jul 2020 02:50:40 +0000 (10:50 +0800)]
powerpc/xive: Remove unused inline function xive_kexec_teardown_cpu()
commit
e27e0a94651e ("powerpc/xive: Remove xive_kexec_teardown_cpu()")
left behind this, remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200715025040.33952-1-yuehaibing@huawei.com
Sourabh Jain [Mon, 13 Jul 2020 05:24:35 +0000 (10:54 +0530)]
powerpc/fadump: fix race between pstore write and fadump crash trigger
When we enter into fadump crash path via system reset we fail to update
the pstore.
On the system reset path we first update the pstore then we go for fadump
crash. But the problem here is when all the CPUs try to get the pstore
lock to initiate the pstore write, only one CPUs will acquire the lock
and proceed with the pstore write. Since it in NMI context CPUs that fail
to get lock do not wait for their turn to write to the pstore and simply
proceed with the next operation which is fadump crash. One of the CPU who
proceeded with fadump crash path triggers the crash and does not wait for
the CPU who gets the pstore lock to complete the pstore update.
Timeline diagram to depicts the sequence of events that leads to an
unsuccessful pstore update when we hit fadump crash path via system reset.
1 2 3 ... n CPU Threads
| | | |
| | | |
Reached to -->|--->|---->| ----------->|
system reset | | | |
path | | | |
| | | |
Try to -->|--->|---->|------------>|
acquire the | | | |
pstore lock | | | |
| | | |
| | | |
Got the -->| +->| | |<-+
pstore lock | | | | | |--> Didn't get the
| --------------------------+ lock and moving
| | | | ahead on fadump
| | | | crash path
| | | |
Begins the -->| | | |
process to | | | |<-- Got the chance to
update the | | | | trigger the crash
pstore | -> | | ... <- |
| | | | | |
| | | | | |<-- Triggers the
| | | | | | crash
| | | | | | ^
| | | | | | |
Writing to -->| | | | | | |
pstore | | | | | | |
| | |
^ |__________________| |
| CPU Relax |
| |
+-----------------------------------------+
|
v
Race: crash triggered before pstore
update completes
To avoid this race condition a barrier is added on crash_fadump path, it
prevents the CPU to trigger the crash until all the online CPUs completes
their task.
A barrier is added to make sure all the secondary CPUs hit the
crash_fadump function before we initiates the crash. A timeout is kept to
ensure the primary CPU (one who initiates the crash) do not wait for
secondary CPUs indefinitely.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713052435.183750-1-sourabhjain@linux.ibm.com
Anton Blanchard [Mon, 13 Jul 2020 08:36:01 +0000 (18:36 +1000)]
powerpc: Add cputime_to_nsecs()
Generic code has a wrapper to implement cputime_to_nsecs() on top of
cputime_to_usecs() but we can easily return the full nanosecond
resolution directly.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713083601.1103978-1-anton@ozlabs.org
Balamuruhan S [Wed, 24 Jun 2020 11:30:38 +0000 (17:00 +0530)]
powerpc/ppc-opcode: Fold PPC_INST_* macros into PPC_RAW_* macros
Lots of PPC_INST_* macros are used only ever in PPC_* macros, fold
those PPC_INST_* into PPC_RAW_* to avoid using PPC_INST_*
accidentally.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Deal with PHWSYNC, PLWSYNC]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624113038.908074-7-bala24@linux.ibm.com
Balamuruhan S [Wed, 24 Jun 2020 11:30:37 +0000 (17:00 +0530)]
powerpc/ppc-opcode: Reuse raw instruction macros to stringify
Wrap existing stringify macros to reuse raw instruction encoding
macros that are newly added.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Add DCBFPS, DCBSTPS, PHWSYNC, PLWSYNC]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624113038.908074-6-bala24@linux.ibm.com
Balamuruhan S [Wed, 24 Jun 2020 11:30:36 +0000 (17:00 +0530)]
powerpc/ppc-opcode: Consolidate powerpc instructions from bpf_jit.h
Move macro definitions of powerpc instructions from bpf_jit.h to
ppc-opcode.h and adopt the users of the macros accordingly. `PPC_MR()`
is defined twice in bpf_jit.h, remove the duplicate one.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624113038.908074-5-bala24@linux.ibm.com
Balamuruhan S [Wed, 24 Jun 2020 11:30:35 +0000 (17:00 +0530)]
powerpc/bpf_jit: Reuse instruction macros from ppc-opcode.h
Remove duplicate macro definitions from bpf_jit.h and reuse the macros
from ppc-opcode.h
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624113038.908074-4-bala24@linux.ibm.com
Balamuruhan S [Wed, 24 Jun 2020 11:30:34 +0000 (17:00 +0530)]
powerpc/ppc-opcode: Move ppc instruction encoding from test_emulate_step
Few ppc instructions are encoded in test_emulate_step.c, consolidate
them and use it from ppc-opcode.h
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624113038.908074-3-bala24@linux.ibm.com
Balamuruhan S [Wed, 24 Jun 2020 11:30:33 +0000 (17:00 +0530)]
powerpc/ppc-opcode: Introduce PPC_RAW_* macros for base instruction encoding
Introduce PPC_RAW_* macros to have all the bare encoding of ppc
instructions. Move `VSX_XX*()` and `TMRN()` macros up to reuse it.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Add DCBFPS, DCBSTPS, PHWSYNC, PLWSYNC]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200624113038.908074-2-bala24@linux.ibm.com
Kajol Jain [Thu, 9 Jul 2020 05:18:36 +0000 (10:48 +0530)]
powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask
Patch here adds a cpumask attr to hv_24x7 pmu along with ABI documentation.
Primary use to expose the cpumask is for the perf tool which has the
capability to parse the driver sysfs folder and understand the
cpumask file. Having cpumask file will reduce the number of perf command
line parameters (will avoid "-C" option in the perf tool
command line). It can also notify the user which is
the current cpu used to retrieve the counter data.
command:# cat /sys/devices/hv_24x7/interface/cpumask
0
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709051836.723765-3-kjain@linux.ibm.com
Kajol Jain [Thu, 9 Jul 2020 05:18:35 +0000 (10:48 +0530)]
powerpc/perf/hv-24x7: Add cpu hotplug support
Patch here adds cpu hotplug functions to hv_24x7 pmu.
A new cpuhp_state "CPUHP_AP_PERF_POWERPC_HV_24x7_ONLINE" enum
is added.
The online callback function updates the cpumask only if its
empty. As the primary intention of adding hotplug support
is to designate a CPU to make HCALL to collect the
counter data.
The offline function test and clear corresponding cpu in a cpumask
and update cpumask to any other active cpu.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709051836.723765-2-kjain@linux.ibm.com
Nathan Lynch [Fri, 12 Jun 2020 05:12:38 +0000 (00:12 -0500)]
powerpc/pseries: remove obsolete memory hotplug DT notifier code
pseries_update_drconf_memory() runs from a DT notifier in response to
an update to the ibm,dynamic-memory property of the
/ibm,dynamic-reconfiguration-memory node. This property is an older
less compact format than the ibm,dynamic-memory-v2 property used in
most currently supported firmwares. There has never been an equivalent
function for the v2 property.
pseries_update_drconf_memory() compares the 'assigned' flag for each
LMB in the old vs new properties and adds or removes the block
accordingly. However it appears to be of no actual utility:
* Partition suspension and PRRNs are specified only to change LMBs'
NUMA affinity information. This notifier should be a no-op for those
scenarios since the assigned flags should not change.
* The memory hotplug/DLPAR path has a hack which short-circuits
execution of the notifier:
dlpar_memory()
...
rtas_hp_event = true;
drmem_update_dt()
of_update_property()
pseries_memory_notifier()
pseries_update_drconf_memory()
if (rtas_hp_event) return;
So this code only makes sense as a relic of the time when more of the
DLPAR workflow took place in user space. I don't see a purpose for it
now.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-19-nathanl@linux.ibm.com
Nathan Lynch [Fri, 12 Jun 2020 05:12:37 +0000 (00:12 -0500)]
powerpc/pseries: remove dlpar_cpu_readd()
dlpar_cpu_readd() is unused now.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-18-nathanl@linux.ibm.com
Nathan Lynch [Fri, 12 Jun 2020 05:12:36 +0000 (00:12 -0500)]
powerpc/pseries: remove memory "re-add" implementation
dlpar_memory() no longer has any callers which pass
PSERIES_HP_ELOG_ACTION_READD. Remove this case and the corresponding
unreachable code.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-17-nathanl@linux.ibm.com
Nathan Lynch [Fri, 12 Jun 2020 05:12:35 +0000 (00:12 -0500)]
powerpc/pseries: remove prrn special case from DT update path
pseries_devicetree_update() is no longer called with PRRN_SCOPE. The
purpose of prrn_update_node() was to remove and then add back a LMB
whose NUMA assignment had changed. This has never been reliable, and
this codepath has been default-disabled for several releases. Remove
prrn_update_node().
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-16-nathanl@linux.ibm.com
Nathan Lynch [Fri, 12 Jun 2020 05:12:34 +0000 (00:12 -0500)]
powerpc/numa: remove arch_update_cpu_topology
Since arch_update_cpu_topology() doesn't do anything on powerpc now,
remove it and associated dead code.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-15-nathanl@linux.ibm.com
Nathan Lynch [Fri, 12 Jun 2020 05:12:33 +0000 (00:12 -0500)]
powerpc/numa: remove prrn_is_enabled()
All users of this prrn_is_enabled() are gone; remove it.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-14-nathanl@linux.ibm.com
Nathan Lynch [Fri, 12 Jun 2020 05:12:32 +0000 (00:12 -0500)]
powerpc/rtasd: simplify handle_rtas_event(), emit message on events
prrn_is_enabled() always returns false/0, so handle_rtas_event() can
be simplified and some dead code can be removed. Use machine_is()
instead of #ifdef to run this code only on pseries, and add an
informational ratelimited message that we are ignoring the
events. PRRN events are relatively rare in normal operation and
usually arise from operator-initiated actions such as a DPO (Dynamic
Platform Optimizer) run.
Eventually we do want to consume these events and update the device
tree, but that needs more care to be safe vs LPM and DLPAR.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-13-nathanl@linux.ibm.com
Nathan Lynch [Fri, 12 Jun 2020 05:12:31 +0000 (00:12 -0500)]
powerpc/numa: remove start/stop_topology_update()
These APIs have become no-ops, so remove them and all call sites.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-12-nathanl@linux.ibm.com
Nathan Lynch [Fri, 12 Jun 2020 05:12:30 +0000 (00:12 -0500)]
powerpc/numa: remove timed_topology_update()
timed_topology_update is a no-op now, so remove it and all call sites.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-11-nathanl@linux.ibm.com
Nathan Lynch [Fri, 12 Jun 2020 05:12:29 +0000 (00:12 -0500)]
powerpc/numa: stub out numa_update_cpu_topology()
Previous changes have removed the code which sets bits in
cpu_associativity_changes_mask and thus it is never modifed at
runtime. From this we can reason that numa_update_cpu_topology()
always returns 0 without doing anything. Remove the body of
numa_update_cpu_topology() and remove all code which becomes
unreachable as a result.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-10-nathanl@linux.ibm.com
Nathan Lynch [Fri, 12 Jun 2020 05:12:28 +0000 (00:12 -0500)]
powerpc/numa: remove vphn_enabled and prrn_enabled internal flags
These flags are always zero now; remove them and suitably adjust the
remaining references to them.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-9-nathanl@linux.ibm.com
Nathan Lynch [Fri, 12 Jun 2020 05:12:27 +0000 (00:12 -0500)]
powerpc/numa: remove unreachable topology workqueue code
Since vphn_enabled is always 0, we can remove the call to
topology_schedule_update() and remove the code which becomes
unreachable as a result.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-8-nathanl@linux.ibm.com
Nathan Lynch [Fri, 12 Jun 2020 05:12:26 +0000 (00:12 -0500)]
powerpc/numa: remove unreachable topology timer code
Since vphn_enabled is always 0, we can stub out
timed_topology_update() and remove the code which becomes unreachable.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-7-nathanl@linux.ibm.com
Nathan Lynch [Fri, 12 Jun 2020 05:12:25 +0000 (00:12 -0500)]
powerpc/numa: make vphn_enabled, prrn_enabled flags const
Previous changes have made it so these flags are never changed;
enforce this by making them const.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-6-nathanl@linux.ibm.com
Nathan Lynch [Fri, 12 Jun 2020 05:12:24 +0000 (00:12 -0500)]
powerpc/numa: remove unreachable topology update code
Since the topology_updates_enabled flag is now always false, remove it
and the code which has become unreachable. This is the minimum change
that prevents 'defined but unused' warnings emitted by the compiler
after stubbing out the start/stop_topology_updates() functions.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-5-nathanl@linux.ibm.com
Nathan Lynch [Fri, 12 Jun 2020 05:12:23 +0000 (00:12 -0500)]
powerpc/numa: remove ability to enable topology updates
Remove the /proc/powerpc/topology_updates interface and the
topology_updates=on/off command line argument. The internal
topology_updates_enabled flag remains for now, but always false.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-4-nathanl@linux.ibm.com
Nathan Lynch [Fri, 12 Jun 2020 05:12:22 +0000 (00:12 -0500)]
powerpc/rtas: don't online CPUs for partition suspend
Partition suspension, used for hibernation and migration, requires
that the OS place all but one of the LPAR's processor threads into one
of two states prior to calling the ibm,suspend-me RTAS function:
* the architected offline state (via RTAS stop-self); or
* the H_JOIN hcall, which does not return until the partition
resumes execution
Using H_CEDE as the offline mode, introduced by
commit
3aa565f53c39 ("powerpc/pseries: Add hooks to put the CPU into
an appropriate offline state"), means that any threads which are
offline from Linux's point of view must be moved to one of those two
states before a partition suspension can proceed.
This was eventually addressed in commit
120496ac2d2d ("powerpc: Bring
all threads online prior to migration/hibernation"), which added code
to temporarily bring up any offline processor threads so they can call
H_JOIN. Conceptually this is fine, but the implementation has had
multiple races with cpu hotplug operations initiated from user
space[1][2][3], the error handling is fragile, and it generates
user-visible cpu hotplug events which is a lot of noise for a platform
feature that's supposed to minimize disruption to workloads.
With commit
3aa565f53c39 ("powerpc/pseries: Add hooks to put the CPU
into an appropriate offline state") reverted, this code becomes
unnecessary, so remove it. Since any offline CPUs now are truly
offline from the platform's point of view, it is no longer necessary
to bring up CPUs only to have them call H_JOIN and then go offline
again upon resuming. Only active threads are required to call H_JOIN;
stopped threads can be left alone.
[1] commit
a6717c01ddc2 ("powerpc/rtas: use device model APIs and
serialization during LPM")
[2] commit
9fb603050ffd ("powerpc/rtas: retry when cpu offline races
with suspend/migration")
[3] commit
dfd718a2ed1f ("powerpc/rtas: Fix a potential race between
CPU-Offline & Migration")
Fixes:
120496ac2d2d ("powerpc: Bring all threads online prior to migration/hibernation")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-3-nathanl@linux.ibm.com
Nathan Lynch [Fri, 12 Jun 2020 05:12:21 +0000 (00:12 -0500)]
powerpc/pseries: remove cede offline state for CPUs
This effectively reverts commit
3aa565f53c39 ("powerpc/pseries: Add
hooks to put the CPU into an appropriate offline state"), which added
an offline mode for CPUs which uses the H_CEDE hcall instead of the
architected stop-self RTAS function in order to facilitate "folding"
of dedicated mode processors on PowerVM platforms to achieve energy
savings. This has been the default offline mode since its
introduction.
There's nothing about stop-self that would prevent the hypervisor from
achieving the energy savings available via H_CEDE, so the original
premise of this change appears to be flawed.
I also have encountered the claim that the transition to and from
ceded state is much faster than stop-self/start-cpu. Certainly we
would not want to use stop-self as an *idle* mode. That is what H_CEDE
is for. However, this difference is insignificant in the context of
Linux CPU hotplug, where the latency of an offline or online operation
on current systems is on the order of 100ms, mainly attributable to
all the various subsystems' cpuhp callbacks.
The cede offline mode also prevents accurate accounting, as discussed
before:
https://lore.kernel.org/linuxppc-dev/
1571740391-3251-1-git-send-email-ego@linux.vnet.ibm.com/
Unconditionally use stop-self to offline processor threads. This is
the architected method for offlining CPUs on PAPR systems.
The "cede_offline" boot parameter is rendered obsolete.
Removing this code enables the removal of the partition suspend code
which temporarily onlines all present CPUs.
Fixes:
3aa565f53c39 ("powerpc/pseries: Add hooks to put the CPU into an appropriate offline state")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-2-nathanl@linux.ibm.com
Nicholas Piggin [Tue, 9 Jun 2020 07:06:09 +0000 (17:06 +1000)]
powerpc/security: Allow for processors that flush the link stack using the special bcctr
If both count cache and link stack are to be flushed, and can be flushed
with the special bcctr, patch that in directly to the flush/branch nop
site.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200609070610.846703-7-npiggin@gmail.com
Nicholas Piggin [Tue, 9 Jun 2020 07:06:08 +0000 (17:06 +1000)]
powerpc/64s: Move branch cache flushing bcctr variant to ppc-ops.h
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200609070610.846703-6-npiggin@gmail.com
Nicholas Piggin [Tue, 9 Jun 2020 07:06:07 +0000 (17:06 +1000)]
powerpc/security: split branch cache flush toggle from code patching
Branch cache flushing code patching has inter-dependencies on both the
link stack and the count cache flushing state.
To make the code clearer and to separate the link stack and count
cache handling, split the "toggle" (setting up variables and printing
enable/disable) from the code patching.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Always print something, even if the flush is disabled]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200609070610.846703-5-npiggin@gmail.com
Nicholas Piggin [Tue, 9 Jun 2020 07:06:06 +0000 (17:06 +1000)]
powerpc/security: make display of branch cache flush more consistent
Make the count-cache and link-stack messages look the same
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200609070610.846703-4-npiggin@gmail.com
Nicholas Piggin [Tue, 9 Jun 2020 07:06:05 +0000 (17:06 +1000)]
powerpc/security: change link stack flush state to the flush type enum
Prepare to allow for hardware link stack flushing by using the
none/sw/hw type, same as the count cache state.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200609070610.846703-3-npiggin@gmail.com
Nicholas Piggin [Tue, 9 Jun 2020 07:06:04 +0000 (17:06 +1000)]
powerpc/security: re-name count cache flush to branch cache flush
The count cache flush mostly refers to both count cache and link stack
flushing. As a first step to untangling these a bit, re-name the bits
that apply to both.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200609070610.846703-2-npiggin@gmail.com
Nicholas Piggin [Tue, 23 Jun 2020 23:41:39 +0000 (09:41 +1000)]
powerpc: re-initialise lazy FPU/VEC counters on every fault
When a FP/VEC/VSX unavailable fault loads registers and enables the
facility in the MSR, re-set the lazy restore counters to 1 rather
than incrementing them so every fault gets the same number of
restores before the next fault.
This probably shouldn't be a practical change because if a lazy counter
was non-zero then it should have been restored and would not cause a
fault when userspace tries to access it. However the code and comment
implies otherwise so that's misleading and unnecessary.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200623234139.2262227-3-npiggin@gmail.com
Nicholas Piggin [Tue, 23 Jun 2020 23:41:38 +0000 (09:41 +1000)]
powerpc/64s: Fix restore_math unnecessarily changing MSR
Before returning to user, if there are missing FP/VEC/VSX bits from the
user MSR then those registers had been saved and must be restored again
before use. restore_math will decide whether to restore immediately, or
skip the restore and let fp/vec/vsx unavailable faults demand load the
registers.
Each time restore_math restores one of the FP/VSX or VEC register sets
is loaded, an 8-bit counter is incremented (load_fp and load_vec). When
these wrap to zero, restore_math no longer restores that register set
until after they are next demand faulted.
It's quite usual for those counters to have different values, so if one
wraps to zero and restore_math no longer restores its registers or user
MSR bit but the other is not zero yet does not need to be restored
(because the kernel is not frequently using the FPU), then restore_math
will be called and it will also not return in the early exit check.
This causes msr_check_and_set to test and set the MSR at every kernel
exit despite having no work to do.
This can cause workloads (e.g., a NULL syscall microbenchmark) to run
fast for a time while both counters are non-zero, then slow down when
one of the counters reaches zero, then speed up again after the second
counter reaches zero. The cost is significant, about 10% slowdown on a
NULL syscall benchmark, and the jittery behaviour is very undesirable.
Fix this by having restore_math test all conditions first, and only
update MSR if we will be loading registers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200623234139.2262227-2-npiggin@gmail.com
Nicholas Piggin [Tue, 23 Jun 2020 23:41:37 +0000 (09:41 +1000)]
powerpc/64s: restore_math remove TM test
The TM test in restore_math added by commit
dc16b553c949e ("powerpc:
Always restore FPU/VEC/VSX if hardware transactional memory in use") is
no longer necessary after commit
a8318c13e79ba ("powerpc/tm: Fix
restoring FP/VMX facility incorrectly on interrupts"), which removed
the cases where restore_math has to restore if TM is active.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200623234139.2262227-1-npiggin@gmail.com
Aneesh Kumar K.V [Wed, 1 Jul 2020 07:22:35 +0000 (12:52 +0530)]
powerpc/pmem: Initialize pmem device on newer hardware
With kernel now supporting new pmem flush/sync instructions, we can now
enable the kernel to initialize the device. On P10 these devices would
appear with a new compatible string. For PAPR device we have
compatible "ibm,pmemory-v2"
and for OF pmem device we have
compatible "pmem-region-v2"
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-8-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Wed, 1 Jul 2020 07:22:34 +0000 (12:52 +0530)]
powerpc/pmem: Avoid the barrier in flush routines
nvdimm expect the flush routines to just mark the cache clean. The barrier
that mark the store globally visible is done in nvdimm_flush().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-7-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Wed, 1 Jul 2020 07:22:33 +0000 (12:52 +0530)]
powerpc/pmem: Update ppc64 to use the new barrier instruction.
pmem on POWER10 can now use phwsync instead of hwsync to ensure
all previous writes are architecturally visible for the platform
buffer flush.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-6-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Wed, 1 Jul 2020 07:22:32 +0000 (12:52 +0530)]
libnvdimm/nvdimm/flush: Allow architecture to override the flush barrier
Architectures like ppc64 provide persistent memory specific barriers
that will ensure that all stores for which the modifications are
written to persistent storage by preceding dcbfps and dcbstps
instructions have updated persistent storage before any data
access or data transfer caused by subsequent instructions is initiated.
This is in addition to the ordering done by wmb()
Update nvdimm core such that architecture can use barriers other than
wmb to ensure all previous writes are architecturally visible for
the platform buffer flush.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-5-aneesh.kumar@linux.ibm.com
Aneesh Kumar K.V [Wed, 1 Jul 2020 07:22:31 +0000 (12:52 +0530)]
powerpc/pmem: Add flush routines using new pmem store and sync instruction
Start using dcbstps; phwsync; sequence for flushing persistent memory range.
The new instructions are implemented as a variant of dcbf and hwsync and on
P8 and P9 they will be executed as those instructions. We avoid using them on
older hardware. This helps to avoid difficult to debug bugs.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200701072235.223558-4-aneesh.kumar@linux.ibm.com