Wolfgang Denk [Mon, 11 Oct 2010 08:00:34 +0000 (10:00 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-x86
Wolfgang Denk [Mon, 11 Oct 2010 07:56:34 +0000 (09:56 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Wolfgang Denk [Mon, 11 Oct 2010 07:52:16 +0000 (09:52 +0200)]
Merge branch 'sf' of git://git.denx.de/u-boot-blackfin
Timur Tabi [Thu, 30 Sep 2010 20:36:50 +0000 (15:36 -0500)]
fsl: add support for NXID v1 EEPROM format
Freescale application note AN3638 describes an update to the NXID format,
which stores MAC addresses and related data on an on-board EEPROM. The new
version adds support for up to 23 MAC addresses, instead of just 8. Since
the initial implementation of NXID had a "0" in the 'version' field, this
new version is called "v1".
Boards that are shipped with EEPROMs in the NXID v1 format should define
CONFIG_SYS_I2C_EEPROM_NXID_1 instead of CONFIG_SYS_I2C_EEPROM_NXID.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kim Phillips [Fri, 3 Sep 2010 15:57:31 +0000 (10:57 -0500)]
powerpc/85xx: fix rev.2 job queue LIODN error storm
pumping line-rate traffic though a p4080 rev.2, which
is configured to encrypt packets prior to forwarding through
an IPsec tunnel, gets this error:
of_platform
ffe302000.jq: DECO: desc idx 22: LIODN error. DECO was trying
to share from itself or from another DECO but the two Non-SEQ LIODN
values didn't match or the "shared from" DECO's Descriptor required that
the SEQ LIODNs be the same and they aren't.
Since high traffic rates cause DECOs to begin to start sharing
shared descriptors amongst themselves, and DECOs inherit job queue
LIODNs when accessing shared descriptors, and a recently discovered
rev.2 h/w erratum requires all sharing job queues in a partition
have same liodn assignment, reassign the first job queue's liodn
assignment to the rest.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 23 Sep 2010 19:50:37 +0000 (14:50 -0500)]
powerpc/p4080: Add new CPC register - HDBCR0
Manual was updated to add a new register for disabling CDQ speculation.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Fri, 9 Jul 2010 14:12:18 +0000 (09:12 -0500)]
powerpc/85xx: Add support for 4th PCI controller on corenet_ds
We configure the controller but dont have virtual address space thus any
devices on the 4th controller are not accessible in u-boot.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Emil Medve [Wed, 1 Sep 2010 03:57:43 +0000 (22:57 -0500)]
powerpc/corenet_ds: Various updates to initial env cfg
* Make the U-Boot update command sequence conditional. Helps prevent
accidental erasing if an upload or previous step fails
* Make it easier to update other FLASH banks
* Enable DDR controller cache line interleaving and bank cs0/cs1 by default
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Timur Tabi [Mon, 2 Aug 2010 18:03:23 +0000 (13:03 -0500)]
fsl: verify writes to the MAC address EEPROM
Update the code which writes to the on-board EEPROM so that it can detect if
the write failed because the EEPROM is write-protected. Most of the 8xxx-class
Freescale reference boards use an AT24C02 EEPROM to store MAC addresses and
similar information. With this patch, if the EEPROM is protected, the
"mac save" command will display an error message indicating that the write
has not succeeded.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Timur Tabi [Wed, 21 Jul 2010 21:56:19 +0000 (16:56 -0500)]
p1022ds: add audclk hwconfig setting to enable codec reference clock
The Freescale P1022DS can use either a 12.288MHz or a 11.2896MHz reference
clock for the audio codec, but by default both are disabled. Add a 'audclk'
hwconfig option that allows the user to choose which clock he wants.
The 12.288MHz clock allows the codec to use sampling rates of 16, 24, 32, 48,
64, and 96KHz. The 11.2896 clock allows 14700, 22050, 29400, 44100, 58800, and
88200Hz.
Also configure a pin muxing to select some SSI signals, which will disable
I2C1.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Haiying Wang [Wed, 29 Sep 2010 17:31:36 +0000 (13:31 -0400)]
mpc8569mds: fix some ddr settings
Enable half drive strength, set RTT to 60Ohm and set write leveling override.
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Haiying Wang [Wed, 29 Sep 2010 17:31:35 +0000 (13:31 -0400)]
mpc8569mds: fix consuming long time while relocating code.
The original code maps boot flash as non-cacheable region. When calling
relocate_code in flash to copy u-boot from flash to ddr, every loop copy command
is read from flash. The flash read speed will be the bottleneck, which consuming
long time to do this operation. To resovle this, map the boot flash as
write-through cache via tlb. And set tlb to remap the flash after code
executing in ddr, to confirm flash erase operation properly done.
Signed-off-by: Kai.Jiang <Kai.Jiang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Haiying Wang [Wed, 29 Sep 2010 17:44:14 +0000 (13:44 -0400)]
mpc8569mds: fix CONFIG_ENV_SIZE
CONFIG_ENV_SIZE of MPC8569MDS was wrongly set to CONFIG_ENV_SECT_SIZE which
is 128KB, so it took longer time to do crc32 calculation for ENV than it should
do. It causes the bootup for MPC8569MDS significantly slow. This patch fixs it
to 0x2000(8KB), also fix the comment for CONFIG_ENV_SECT_SIZE to correct size.
Signed-off-by: Kai.Jiang <Kai.Jiang@freescale.com
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Graeme Russ [Thu, 7 Oct 2010 09:03:33 +0000 (20:03 +1100)]
x86: Implement fully relocatable image
u-boot.bin can be loaded at any 4-byte aligned memory location and directly
'jumped' to using the 'go' command using the load address as the start
address. Doing so performs a 'warm boot' which skips memory initialisation
and other low-level initialisations, relocates U-Boot to upper memory and
starts U-Boot in RAM as per normal 'cold boot'
Graeme Russ [Thu, 7 Oct 2010 09:03:33 +0000 (20:03 +1100)]
x86: Use loops instead of memcpy/memset in board_init_f
Provides a small speed increase and prepares for fully relocatable image.
Downside is the TEXT_BASE, bss, load address etc must ALL be aligned on a
a 4-byte boundary which is not such a terrible restriction as everything
is already 4-byte aligned anyway
Graeme Russ [Thu, 7 Oct 2010 09:03:32 +0000 (20:03 +1100)]
x86: Rearrange linker script
Tidy up the linker script and discard some sections to save space
Graeme Russ [Thu, 7 Oct 2010 09:03:31 +0000 (20:03 +1100)]
x86: Rename linker script symbols
Create more generic names for the symbols exported from the linker script
Graeme Russ [Thu, 7 Oct 2010 09:03:30 +0000 (20:03 +1100)]
x86: Set cold/warm boot flag
Graeme Russ [Thu, 7 Oct 2010 09:03:29 +0000 (20:03 +1100)]
x86: Place global data below stack before entering C
By reserving space for the Global Data immediately below the stack during
assembly level initialisation, the C declaration of the static global data
can be removed, along with the 'RAM Bootstrap' function. This results in
cleaner code, and the ability to pass boot-up flags from assembler into C
Graeme Russ [Thu, 7 Oct 2010 09:03:28 +0000 (20:03 +1100)]
x86: Dont clobber %eax after getting memory size
By using another register, reduce code size by one instruction
Graeme Russ [Thu, 7 Oct 2010 09:03:28 +0000 (20:03 +1100)]
x86: Don't clobber %ebx
%ebx will hold low-level boot flags and must be preserved
Graeme Russ [Thu, 7 Oct 2010 09:03:27 +0000 (20:03 +1100)]
x86: Remove usage of %ebp as a return pointer
Using %ebp as a return pointer prevents creating 'load anywhere' images
Graeme Russ [Thu, 7 Oct 2010 09:03:26 +0000 (20:03 +1100)]
x86: Move ECC initialisation outside RAM initialisation
To allow for 'load anywhere' images, the %ebp return pointer 'hack' must
be removed, so we cannot have two 'calls' to get_mem_size
Graeme Russ [Thu, 7 Oct 2010 09:03:24 +0000 (20:03 +1100)]
x86: Remove progress indication in low-level init
Progress indication is not relocation friendly so remove it in
preperation for full relocatability support
Graeme Russ [Thu, 7 Oct 2010 09:03:23 +0000 (20:03 +1100)]
x86: Fix %ss and %esp in register structure for interrupts
Graeme Russ [Thu, 7 Oct 2010 09:03:23 +0000 (20:03 +1100)]
x86: Change compiler options
Change to:
- reparam=3
- no-from-pointer
- no-stack-protector
- preferred-stack-boundary=2
- no-top-level-reorder
These options make the code a little smaller and faster
Graeme Russ [Thu, 7 Oct 2010 09:03:21 +0000 (20:03 +1100)]
x86: Coding Style Cleanup
Perform some basic code cleanups of the x86 files
Graeme Russ [Thu, 7 Oct 2010 09:03:21 +0000 (20:03 +1100)]
x86: Move loading of GTD to C code
Linux has C macros and code to load the GTD after switching to Protected
Mode. Using these greatly simplifies the assembler code
Graeme Russ [Thu, 7 Oct 2010 09:03:20 +0000 (20:03 +1100)]
x86: use gc sections to reduce image size
Follow the discussion of Charles Manning and Mike Frysinger.
Using gc_sections helps reduce image size.
Graeme Russ [Thu, 7 Oct 2010 09:03:19 +0000 (20:03 +1100)]
x86: zboot update
The header of recent Linux Kernels includes the size of the image, and
therefore is not needed to be passed to zboot. Still process the third
parameter (size of image) in the event that an older kernel is being loaded
Graeme Russ [Thu, 7 Oct 2010 09:03:18 +0000 (20:03 +1100)]
x86: Use TEXT_BASE in linker scripts
Use TEXT_BASE rather than a hard-coded base address on x86 linker scripts.
This will allow any board to define its base link address without having
to modify the linker script
Graeme Russ [Thu, 7 Oct 2010 09:03:18 +0000 (20:03 +1100)]
x86: Make CONFIG_RELOC_FIXUP_WORKS generic for all x86 boards
Relocation is not board-specific for the x86 architectrure, so
CONFIG_RELOC_FIXUP_WORKS can be defined globally in the config.h
Graeme Russ [Thu, 7 Oct 2010 09:03:17 +0000 (20:03 +1100)]
x86: Remove bi_env from do_bdinfo
Commit
55e97429d1e6cf0976711e4e0f29ea924b7e5917 removed the definition
from /arch/i386/include/asm/u-boot.h but not its usage in do_bdinfo()
Reinhard Meyer [Thu, 26 Aug 2010 08:57:27 +0000 (10:57 +0200)]
sspi: add options to specify bus and mode
and clean up error messages and help,
removed pointless debug() call.
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
David Jander [Mon, 23 Aug 2010 13:12:16 +0000 (15:12 +0200)]
sf: spansion: add support for S25FL032P parts
This patch introduces an extra mask-field in spansion_spi_flash_params
to support flash chips with 1-byte extended ID (like the S25FL032P).
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Marc-André Hébert [Tue, 10 Aug 2010 13:02:09 +0000 (09:02 -0400)]
sf: spansion: fixing erasing when sector size >64KiB
The spansion_erase currently only works when the sector size is 64KB.
cmd[1] should contain the higher 8 bit of the 24 bit address of the
sector to be erased. Currently it is holding the sector index to be
erased which happens to be the same thing when the sector size is
64KB.
Signed-off-by: Marc-Andre Hebert <marc-andre.hebert@humanware.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Andreas Bießmann [Sat, 25 Sep 2010 15:45:59 +0000 (17:45 +0200)]
include/compiler.h: remove uint typedef for __MACH__
uint is typedefed twice if __MACH__ is defined. This generates an error
when calling MAKEALL for netstar bord on OS X.
This patch removes the typedef for __MACH__ case in favor of general
definiton some lines below.
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Peter Tyser [Wed, 29 Sep 2010 18:30:56 +0000 (13:30 -0500)]
Replace MAX_CMDBUF_SIZE references with CONFIG_SYS_CBSIZE
The MAX_CMDBUF_SIZE define is unneeded as it should always
equal CONFIG_SYS_CBSIZE.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Jeff Dischler [Wed, 29 Sep 2010 18:46:19 +0000 (13:46 -0500)]
ds1621: Fix negative temperature readings
Fix bug where signed data was processed as unsigned. The bug previously
resulted in negative temperature readings wrapping around, eg -10 became
245.
Signed-off-by: Jeff Dischler <jdischler@xes-inc.com>
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Peter Tyser [Wed, 29 Sep 2010 18:46:18 +0000 (13:46 -0500)]
ds1621: Clean up coding style
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Peter Tyser [Wed, 29 Sep 2010 18:46:17 +0000 (13:46 -0500)]
ds1621: Poll for register write completion
Poll the ds1621 NV Memory Busy bit instead of waiting a static amount of
time for register writes.
Also add config retister bit defines.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Andreas Bießmann [Fri, 1 Oct 2010 20:51:02 +0000 (22:51 +0200)]
lib/hashtable.c: add CONFIG_ENV_MIN_ENTRIES
This patch adds a new config parameter for adjusting the calculation of
hash table size when importing a buffer.
When importing a extremely small buffer (e.g. the default_environment)
the old calculation generated a hash table which could hold at most the
buffer content but no more entires.
The new calculation add a fixed number of entries to the result to fit
better for small import buffers. This amount may be configured by the
user in board file to adjust the behaviour.
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Mike Frysinger [Sat, 2 Oct 2010 19:44:53 +0000 (15:44 -0400)]
cmd_elf: add an option for loading ELFs according to PHDRs
The current ELF loading function does a lot of work above and beyond a
simple "loading". It ignores the real load addresses and loads things
into their virtual (runtime) address. This is undesirable when we just
want it to load an ELF and let the ELF do the actual C runtime init.
So add a command line option to let people choose to load via either the
program or section headers. I'd prefer to have program header loading
be the default, but this would break historical behavior, so I'll leave
section header loading as the norm.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Andre Schwarz [Tue, 5 Oct 2010 09:59:31 +0000 (11:59 +0200)]
PowerPC: change board specific early pci_init() into generic.
Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Stefan Roese [Wed, 6 Oct 2010 16:50:59 +0000 (18:50 +0200)]
serial.c: Fix build breakage introduced with commit
e3c78c9b
This patch fixes the compilation problem introduced with commit
e3c78c9b [ppc4xx: Remove now unused CONFIG_UART1_CONSOLE]:
-> ./MAKEALL TB5200
Configuring for TB5200 board...
serial.c: In function '__default_serial_console':
serial.c:94: warning: no return statement in function returning non-void
I accidentally removed an "#else" line. This patch adds it back.
Signed-off-by: Stefan Roese <sr@denx.de>
Heiko Schocher [Tue, 5 Oct 2010 12:17:00 +0000 (14:17 +0200)]
env: fix cmd_env_sub fct pointers if CONFIG_RELOC_FIXUP_WORKS is not defined
commit
ea882baf9c17cd142c99e3ff640d3ab01daa5cec introduces
a command_sub_table for the "env" command. On arm, avr32, m68k,
mips and sparc architectures, relocation needs manual fixups,
so add these fixups for this sub command table too.
Tested on arm/qong board.
mips board (Ben NanoNote) from Xiangfu Liu
arm/AT91 board from Reinhard Meyer
Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
cc: Xiangfu Liu <xiangfu@openmobilefree.net>
cc: Reinhard Meyer <u-boot@emk-elektronik.de>
cc: sshtylyov@mvista.com
Peter Tyser [Wed, 6 Oct 2010 04:48:47 +0000 (23:48 -0500)]
board/mpl: Remove mpl-specific memory test command
The mpl-specfic memory test is only documented for one board, doesn't
compile cleanly, uses improper coding style, and overlaps functionality
with U-Boot's common 'mtest' command, so lets get rid of it.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
CC: d.peter@mpl.ch
CC: d.mueller@elsoft.ch
CC: wd@denx.de
Steve Sakoman [Tue, 5 Oct 2010 22:31:38 +0000 (15:31 -0700)]
env_mmc: Fix broken build due to set_default_env() change
Previously the function was set_default_env(void), it is now
set_default_env(const char *s). This patch adds the required
parameter. This fixes a broken build on OMAP4430 SDP.
Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
Wolfgang Denk [Tue, 5 Oct 2010 20:54:54 +0000 (22:54 +0200)]
CCM: remove code for yet another corpse
The CCM board has long reached EOL, and support for it is no longer
relevant in current versions of U-Boot. Remove it.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 5 Oct 2010 20:54:53 +0000 (22:54 +0200)]
PCU_E: remove code for yet another corpse
The PCU_E board has long reached EOL, and support for it is no longer
relevant in current versions of U-Boot. Remove it.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 5 Oct 2010 19:27:17 +0000 (21:27 +0200)]
pm9g45: fix compile warning
Fix warning:
pm9g45.c: In function 'pm9g45_macb_hw_init':
pm9g45.c:99: warning: unused variable 'pio'
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Ilko Iliev <iliev@ronetix.at>
Wolfgang Denk [Tue, 5 Oct 2010 19:24:17 +0000 (21:24 +0200)]
pm9263: fix compile warning
Fix warning:
pm9263.c: In function 'pm9263_macb_hw_init':
pm9263.c:99: warning: unused variable 'pio'
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Ilko Iliev <iliev@ronetix.at>
Wolfgang Denk [Tue, 5 Oct 2010 12:08:55 +0000 (14:08 +0200)]
rules.mk: make sure we always create a .depend file
There are some cases where "make depend" would always run when
entering a directory. This happened when both the $(SRCS) and
$(HOSTSRCS) lists were empty (which is for example typical for the
examples/api/ directory). Avoid this by making sure that a ".depend"
file gets always created, even if empty.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Graeme Smecher [Thu, 29 Jul 2010 13:00:02 +0000 (09:00 -0400)]
sf: winbond: add support W25Q64 parts
Adds support for Winbond's W25Q64 SPI flash. These devices are used on
(among others) Xilinx' SP601 and SP605 Spartan-6 evaluation boards.
Tested with "sf" commands.
Signed-off-by: Graeme Smecher <graeme.smecher@mail.mcgill.ca>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Wolfgang Denk [Tue, 5 Oct 2010 12:42:32 +0000 (14:42 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-blackfin
Wolfgang Denk [Tue, 5 Oct 2010 12:37:25 +0000 (14:37 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Wolfgang Denk [Tue, 5 Oct 2010 12:31:48 +0000 (14:31 +0200)]
Merge branch 'next' of git://git.denx.de/u-boot-video
Rupjyoti Sarmah [Fri, 1 Oct 2010 09:01:28 +0000 (14:31 +0530)]
ppc44x: config GPIOs for USB on canyonlands board
The GPIO 16 and 19 reconfiguration should be done once USB is initialized.
So moved the reconfiguration to the USB init function.
Signed-off-by: Rupjyoti Sarmah <rsarmah@apm.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Wed, 29 Sep 2010 14:59:57 +0000 (16:59 +0200)]
ppc4xx: Remove some testing hacks from ppc4xx.h
I accidentally left these hacks in the code while doing the big header
cleanup. Let's remove it now.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Wed, 29 Sep 2010 14:58:38 +0000 (16:58 +0200)]
ppc4xx: Use common ns16550 functions in 4xx UART POST driver
This patch changes the PPC4xx POST UART driver to use the common
NS16550 functions for receiving and sending. Additionally the
local function for SoC divisor setup are removed. Instead the
functions from arch/powerpc/cpu/ppc4xx/4xx_uart.c are used. This
removes code duplication.
Also the common CONFIG_SYS_NS16550_COMx defines are now used
to describe the POST UART's.
And a compile breakage is fixed, introduced by a git merge of
the ppc4xx/next branch into master. Now "ppc4xx.h" is moved to
"asm/ppc4xx.h". Fixed as well with this patch.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 28 Sep 2010 06:06:06 +0000 (08:06 +0200)]
ppc4xx: Small whitespace cleanup in canyonlands.c
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 24 Sep 2010 11:51:50 +0000 (13:51 +0200)]
ppc4xx/fdt/flash: Fix bug in fdt_fixup_nor_flash_node()
This patch fixes a bug in fdt_fixup_nor_flash_node() when the reg
property has multiple reg tuples, like:
reg = <0 0x00000000 0x04000000
0 0x04000000 0x04000000>;
In this case this function did not update the reg property correctly.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 24 Sep 2010 09:20:41 +0000 (11:20 +0200)]
ppc4xx: Add defines for COM3 & COM4 (UART2 & UART3) on 440EPx/GRx
Signed-off-by: Stefan Roese <sr@denx.de>
Sascha Laue [Thu, 19 Aug 2010 07:38:56 +0000 (09:38 +0200)]
ppc4xx: Big lwmon5 board support rework/update
This patch brings the lwmon5 board support up-to-date. Here a
summary of the changes:
lwmon5 board port related:
- GPIO's changed to control the LSB transmitter
- Reset USB PHY's upon power-up
- Enable CAN upon power-up
- USB init error workaround (errata CHIP_6)
- EBC: Enable burstmode and modify the timings for the GDC memory
- EBC: Speed up NOR flash timings
lwmon5 board POST related:
- Add FPGA memory test
- Add GDC memory test
- DSP POST reworked
- SYSMON POST: Fix handling of negative temperatures
- Add output for sysmon1 POST
- HW-watchdog min. time test reworked
Additionally some coding-style changes were done.
Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Tirumala Marri [Tue, 28 Sep 2010 21:15:21 +0000 (14:15 -0700)]
APM821xx: Add bluestone board support
Add support code for bluestone board wth APM821XX processor based.
This patch includes early board init, misc init, configure EBC,
initializes UIC, MAKEALL, board.cfg and MAINTAINERS file.
Signed-off-by: Tirumala R Marri <tmarri@apm.com
Signed-off-by: Stefan Roese <sr@denx.de>
Tirumala Marri [Tue, 28 Sep 2010 21:15:14 +0000 (14:15 -0700)]
APM821xx: Add CPU support
APM821XX is a new line of SoCs which are derivatives of
PPC44X family of processors. This patch adds support of CPU, cache,
tlb, 32k ocm, bootstraps, PLB and AHB bus.
Signed-off-by: Tirumala R Marri <tmarri@apm.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Wed, 18 Aug 2010 12:14:17 +0000 (14:14 +0200)]
hmi1001, mucmc52, uc100, uc101: move boards to vendor directory
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Roderik Wildenburg <roderik.wildenburg@manroland.com>
Wolfgang Denk [Wed, 29 Sep 2010 09:25:55 +0000 (11:25 +0200)]
CONFIG_SYS_ARM_WITHOUT_RELOC: document feature removal
Signed-off-by: Wolfgang Denk <wd@denx.de>
Mike Frysinger [Sat, 2 Oct 2010 18:31:32 +0000 (14:31 -0400)]
Blackfin: otp: fix build after constification of args[]
The OTP code does a little shuffling of arguments that aren't really
necessary, so use a local variable instead to fix build errors now
that the args[] parameter is const.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 1 Oct 2010 23:42:08 +0000 (19:42 -0400)]
Blackfin: bf537-pnav: increase monitor len
Building this board for parallel flash fills up the bss section and thus
fails to link, so bump up the monitor size a bit.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 1 Oct 2010 20:59:19 +0000 (16:59 -0400)]
Blackfin: bf527-ad7160-eval: fix GPIO CS define
Rather than use a hardcoded "7", use the new Blackfin global define.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 29 Sep 2010 20:24:16 +0000 (20:24 +0000)]
Blackfin: bf548-ezkit: bump SPI flash size up
The current size used (256KiB) is smaller than the LDR created for
the bf548-ezkit, so 'run update' doesn't work correctly. So bump
up the size a bit by making this flexible per-board config.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 29 Sep 2010 18:46:42 +0000 (14:46 -0400)]
Blackfin: fix MMC init output alignment
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Wojtek Skulski [Mon, 27 Sep 2010 22:21:59 +0000 (18:21 -0400)]
Blackfin: blackvme: new board port
The board includes:
* ADSP-BF561 rev. 0.5
* 32-bit SDRAM (2 * MT48LC16M16A2TG or MT48LC32M16A2TG)
* Gigabit Ether AX88180 (ASIX) + 88E1111 rev. B2 (Marvell)
* SPI boot flash on PF2 (M25P64 8MB, or M25P128 16 MB)
* FPGA boot flash on PF3 (M25P64 8MB, or M25P128 16 MB)
* Spartan6-LX150 (memory-mapped; both PPIs also connected)
* See http://www.skutek.com/
Signed-off-by: Wojtek Skulski <skulski@pas.rochester.edu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 26 Sep 2010 07:00:38 +0000 (07:00 +0000)]
Blackfin: propagate target cpu defines when building embedded env
Since we're no longer extracting the env from the target ELF file (since
upstream wouldn't take that change), we're back to the problem of cpu
defines not properly propagating to the env setup stage. So the embedded
env built by the host compiler doesn't match the one that is linked into
the u-boot env.
Reported-by: Vivi Li <vivi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 24 Sep 2010 19:34:08 +0000 (15:34 -0400)]
Blackfin: cmd_gpio: accept upper case pin names
The intention all along was to accept pin names irrelevant of their case.
But I guess I forgot to test/implement support for that.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 21 Sep 2010 23:47:27 +0000 (19:47 -0400)]
Blackfin: bf526-ezbrd: enable BootROM-OOB layout when booting from NAND
We need to use the Blackfin BootROM-specific OOB layout when we boot out
of NAND as that is what the on-chip ROM expects.
Also need to increase the monitor size a little to accommodate the extra
NAND code overhead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 21 Sep 2010 23:33:53 +0000 (19:33 -0400)]
Blackfin: adi config: enable nand lock/unlock support
We use the lock/unlock options in our default nand code, so enabl
support for the options.
Reported-by: Vivi Li <vivi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Peter Meerwald [Mon, 20 Sep 2010 18:08:57 +0000 (14:08 -0400)]
Blackfin: bct-brettl2: new board port
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 20 Sep 2010 19:14:58 +0000 (15:14 -0400)]
Blackfin: adi config: allow boards to tweak a little more
Let people easily override bootdelay and network settings.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 20 Sep 2010 17:46:29 +0000 (13:46 -0400)]
Blackfin: cmd_gpio: return gpio value to caller
Make the GPIO command usable in a scripting environment by returning
the GPIO value rather than always 0.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 19 Sep 2010 20:28:40 +0000 (16:28 -0400)]
Blackfin: bf527-sdp: new board port
Support for the Blackfin System Development Platform (SDP) base module.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 19 Sep 2010 20:27:24 +0000 (16:27 -0400)]
Blackfin: adi config: add a hook for boards to append the env
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 19 Sep 2010 20:26:55 +0000 (16:26 -0400)]
Blackfin: adi config: add an "all spi flashes" option to unify board lists
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Peter Meerwald [Fri, 17 Sep 2010 17:02:42 +0000 (13:02 -0400)]
Blackfin: support a 3rd gpio cfi pin
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 13 Aug 2010 19:48:09 +0000 (15:48 -0400)]
Blackfin: cmd_gpio: document/extend input sub-option
The input sub command was missing from the help text, and it didn't show
the actual value currently read on the GPIO. This allows people to read
the value of input pins.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 9 Aug 2010 21:57:47 +0000 (17:57 -0400)]
Blackfin: move CONFIG_BFIN_CPU to board config.mk
The CONFIG_BFIN_CPU option is largely used in the build system, so move
it out of the board config.h and into the board config.mk. It'd be nice
to keep everything in the config.h, but the patch to extract that value
early was rejected.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 26 Jul 2010 05:27:17 +0000 (01:27 -0400)]
Blackfin: bf561: merge headers
Only the BF561 port was using the common dual core headers, so merge them
into the BF561 specific headers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 26 Jul 2010 05:06:37 +0000 (01:06 -0400)]
Blackfin: bf533: merge headers
Only the BF533 port was using the common extended headers, so merge them
into the BF533 specific headers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 26 Jul 2010 05:10:35 +0000 (01:10 -0400)]
Blackfin: unify core MMRs
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 26 Jul 2010 05:05:41 +0000 (01:05 -0400)]
Blackfin: bf52x: unify arch header duplication
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 26 Jul 2010 05:04:38 +0000 (01:04 -0400)]
Blackfin: bf537: unify arch header duplication
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 25 Jul 2010 20:39:45 +0000 (16:39 -0400)]
Blackfin: punt old *p style volatile MMR defines
These are unused now, so punt them to clean things up.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 25 Jul 2010 21:19:36 +0000 (17:19 -0400)]
Blackfin: bf527-ad7160-eval: convert from old style MMR macros
The old MMR defines are being scrubbed, so convert the driver to use the
new standard helper macros.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 25 Jul 2010 21:19:16 +0000 (17:19 -0400)]
Blackfin: cm-bf548: video: convert from old style MMR macros
The old MMR defines are being scrubbed, so convert the driver to use the
new standard helper macros.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 25 Jul 2010 21:19:00 +0000 (17:19 -0400)]
Blackfin: bf548-ezkit: video: convert from old style MMR macros
The old MMR defines are being scrubbed, so convert the driver to use the
new standard helper macros.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 25 Jul 2010 21:18:42 +0000 (17:18 -0400)]
Blackfin: bf527-ezkit: video: convert from old style MMR macros
The old MMR defines are being scrubbed, so convert the driver to use the
new standard helper macros.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 25 Jul 2010 21:16:50 +0000 (17:16 -0400)]
Blackfin: bf537-stamp: post: update old MMR style macros
The old MMR defines are being scrubbed, so convert the driver to use the
new standard helper macros.
For the GPIO MMR usage, convert to the new GPIO framework.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 25 Jul 2010 20:38:12 +0000 (16:38 -0400)]
Blackfin: bfin_mac: convert from old style MMR macros
The old MMR defines are being scrubbed, so convert the driver to use the
new standard helper macros.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 25 Jul 2010 20:17:45 +0000 (16:17 -0400)]
Blackfin: punt headers for non-existent BF541
There is no BF541 processor variant, so punt headers for it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>