usb: cdns3: fix incorrect handling TRB_SMM flag for ISOC transfer

commit d5dcc33677d7415c5f23b3c052f9e80cbab9ea4e upstream.

The TRB_SMM flag indicates that DMA has completed the TD service with
this TRB. Usually it’s a last TRB in TD. In case of ISOC transfer for
bInterval > 1 each ISOC transfer contains more than one TD associated
with usb request (one TD per ITP). In such case the TRB_SMM flag will
be set in every TD and driver will recognize the end of transfer after
processing the first TD with TRB_SMM. In result driver stops updating
request->actual and returns incorrect actual length.
To fix this issue driver additionally must check TRB_CHAIN which is not
used for isochronous transfers.

Fixes: 249f0a25e8be ("usb: cdns3: gadget: handle sg list use case at completion correctly")
cc: <stable@vger.kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20220825062207.5824-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdns3: fix issue with rearming ISO OUT endpoint

commit b46a6b09fa056042a302b181a1941f0056944603 upstream.

ISO OUT endpoint is enabled during queuing first usb request
in transfer ring and disabled when TRBERR is reported by controller.
After TRBERR and before next transfer added to TR driver must again
reenable endpoint but does not.
To solve this issue during processing TRBERR event driver must
set the flag EP_UPDATE_EP_TRBADDR in priv_ep->flags field.

Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
cc: <stable@vger.kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20220825062137.5766-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: fix wrong order of phy_power_on and phy_init

commit f9b995b49a07bd0d43b0e490f59be84415c745ae upstream.

Since 1599069a62c6 ("phy: core: Warn when phy_power_on is called before
phy_init") the driver complains. In my case (Amlogic SoC) the warning
is: phy phy-fe03e000.phy.2: phy_power_on was called before phy_init
So change the order of the two calls. The same change has to be done
to the order of phy_exit() and phy_power_off().

Fixes: 09a75e857790 ("usb: dwc2: refactor common low-level hw code to platform.c")
Cc: stable@vger.kernel.org
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/dfcc6b40-2274-4e86-e73c-5c5e6aa3e046@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpm: Return ENOTSUPP for power supply prop writes

commit f2d38edc5e3375e56b4a30d5b66cefd385a2b38c upstream.

When the port does not support USB PD, prevent transition to PD
only states when power supply property is written. In this case,
TCPM transitions to SNK_NEGOTIATE_CAPABILITIES
which should not be the case given that the port is not pd_capable.

[   84.308251] state change SNK_READY -> SNK_NEGOTIATE_CAPABILITIES [rev3 NONE_AMS]
[   84.308335] Setting usb_comm capable false
[   84.323367] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:5000 ret:0
[   84.323376] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS]

Fixes: e9e6e164ed8f6 ("usb: typec: tcpm: Support non-PD mode")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20220817215410.1807477-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: intel_pmc_mux: Add new ACPI ID for Meteor Lake IOM device

commit 1b1b672cc1d4fb3065dac79efb8901bd6244ef69 upstream.

This adds the necessary ACPI ID for Intel Meteor Lake
IOM devices.

The callback function is_memory() is modified so that it
also checks if the resource descriptor passed to it is a
memory type "Address Space Resource Descriptor".

On Intel Meteor Lake the ACPI memory resource is not
described using the "32-bit Memory Range Descriptor" because
the memory is outside of the 32-bit address space. The
memory resource is described using the "Address Space
Resource Descriptor" instead.

Intel Meteor Lake is the first platform to describe the
memory resource for this device with Address Space Resource
Descriptor, but it most likely will not be the last.
Therefore the change to the is_memory() callback function
is made generic.

Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Cc: stable@vger.kernel.org
[ heikki: Rewrote the commit message. ]
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220816101629.69054-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles

commit c1e5c2f0cb8a22ec2e14af92afc7006491bebabb upstream.

Fix incorrect pin assignment values when connecting to a monitor with
Type-C receptacle instead of a plug.

According to specification, an UFP_D receptacle's pin assignment
should came from the UFP_D pin assignments field (bit 23:16), while
an UFP_D plug's assignments are described in the DFP_D pin assignments
(bit 15:8) during Mode Discovery.

For example the LG 27 UL850-W is a monitor with Type-C receptacle.
The monitor responds to MODE DISCOVERY command with following
DisplayPort Capability flag:

        dp->alt->vdo=0x140045

The existing logic only take cares of UPF_D plug case,
and would take the bit 15:8 for this 0x140045 case.

This results in an non-existing pin assignment 0x0 in
dp_altmode_configure.

To fix this problem a new set of macros are introduced
to take plug/receptacle differences into consideration.

Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Co-developed-by: Pablo Sun <pablo.sun@mediatek.com>
Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20220804034803.19486-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode

commit 8ffe20d08f2c95d702c453020d03a4c568a988f0 upstream.

We added PIDs for MV32-WA/WB MBIM mode before, now we need to add
support for RmNet mode.

Test evidence as below:
T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f3 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F3 USB Mobile Broadband
S:  SerialNumber=d7b4be8d
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f4 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F4 USB Mobile Broadband
S:  SerialNumber=d095087d
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

Signed-off-by: Slark Xiao <slark_xiao@163.com>
[ johan: sort entries ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add Quectel EM060K modem

commit f766f3abe6dbc9bf8b56a5d53c87e5a17942c154 upstream.

Add usb product id entry for the Quectel EM060K module.

"MBIM mode": DIAG + NMEA + AT + MODEM + MBIM + QDSS

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=030b Rev= 5.04
S:  Manufacturer=Quectel
S:  Product=EM060K-GL
S:  SerialNumber=89fb57db
C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 8 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 9 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 9 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#=12 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com>
[ johan: mention QDSS port and sort entries ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add support for OPPO R11 diag port

commit 8d5fc280392735e4441b35de14f2f4860fa8d83c upstream.

Add support for OPPO R11 USB diag serial port to option driver. This
phone uses Qualcomm Snapdragon 660 SoC.

usb-devices output:
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22d9 ProdID=276c Rev=04.04
S:  Manufacturer=OPPO
S:  Product=SDM660-MTP _SN:09C6BCA7
S:  SerialNumber=beb2c403
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs

Signed-off-by: Yan Xinyu <sdlyyxy@bupt.edu.cn>
Link: https://lore.kernel.org/r/20220714102037.4113889-1-sdlyyxy@bupt.edu.cn
Link: https://lore.kernel.org/r/Yt1WfSZk03Plpnan@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: add Decagon UCA device id

commit ceb4038472a4803e7046ed488b03d11551991514 upstream.

Add the device id for Decagon Devices USB Cable Adapter.

Link: https://lore.kernel.org/r/trinity-819f9db2-d3e1-40e9-a669-9c245817c046-1661523546680@msvc-mesg-web108
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Add grace period after xHC start to prevent premature runtime suspend.

commit 33e321586e37b642ad10594b9ef25a613555cd08 upstream.

After xHC controller is started, either in probe or resume, it can take
a while before any of the connected usb devices are visible to the roothub
due to link training.

It's possible xhci driver loads, sees no acivity and suspends the host
before the USB device is visible.

In one testcase with a hotplugged xHC controller the host finally detected
the connected USB device and generated a wake 500ms after host initial
start.

If hosts didn't suspend the device duringe training it probablty wouldn't
take up to 500ms to detect it, but looking at specs reveal USB3 link
training has a couple long timeout values, such as 120ms
RxDetectQuietTimeout, and 360ms PollingLFPSTimeout.

So Add a 500ms grace period that keeps polling the roothub for 500ms after
start, preventing runtime suspend until USB devices are detected.

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220825150840.132216-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: mceusb: Use new usb_control_msg_*() routines

commit 608e58a0f4617977178131f5f68a3fce1d3f5316 upstream.

Automatic kernel fuzzing led to a WARN about invalid pipe direction in
the mceusb driver:

------------[ cut here ]------------
usb 6-1: BOGUS control dir, pipe 80000380 doesn't match bRequestType 40
WARNING: CPU: 0 PID: 2465 at drivers/usb/core/urb.c:410
usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410
Modules linked in:
CPU: 0 PID: 2465 Comm: kworker/0:2 Not tainted 5.19.0-rc4-00208-g69cb6c6556ad #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410
Code: 7c 24 40 e8 ac 23 91 fd 48 8b 7c 24 40 e8 b2 70 1b ff 45 89 e8
44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 a0 30 a9 86 e8 48 07 11 02 <0f> 0b
e9 1c f0 ff ff e8 7e 23 91 fd 0f b6 1d 63 22 83 05 31 ff 41
RSP: 0018:ffffc900032becf0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8881100f3058 RCX: 0000000000000000
RDX: ffffc90004961000 RSI: ffff888114c6d580 RDI: fffff52000657d90
RBP: ffff888105ad90f0 R08: ffffffff812c3638 R09: 0000000000000000
R10: 0000000000000005 R11: ffffed1023504ef1 R12: ffff888105ad9000
R13: 0000000000000040 R14: 0000000080000380 R15: ffff88810ba96500
FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe810bda58 CR3: 000000010b720000 CR4: 0000000000350ef0
Call Trace:
<TASK>
usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58
usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153
mceusb_gen1_init drivers/media/rc/mceusb.c:1431 [inline]
mceusb_dev_probe+0x258e/0x33f0 drivers/media/rc/mceusb.c:1807

The reason for the warning is clear enough; the driver sends an
unusual read request on endpoint 0 but does not set the USB_DIR_IN bit
in the bRequestType field.

More importantly, the whole situation can be avoided and the driver
simplified by converting it over to the relatively new
usb_control_msg_recv() and usb_control_msg_send() routines.  That's
what this fix does.

Link: https://lore.kernel.org/all/CAB7eexLLApHJwZfMQ=X-PtRhw0BgO+5KcSMS05FNUYejJXqtSA@mail.gmail.com/
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: stable@vger.kernel.org
Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YwkfnBFCSEVC6XZu@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: pci: Add support for Intel Raptor Lake

commit bad0d1d726ace2db9e0f39c62b173bc7cc43dd6a upstream.

This adds the necessary PCI device ID for the controller
inside the Intel Raptor Lake CPU block. The controllers that
are part of the PCH (chipset) have separate device IDs.

Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220815123334.87526-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thunderbolt: Use the actual buffer in tb_async_error()

commit eb100b8fa8e8b59eb3e5fc7a5fd4a1e3c5950f64 upstream.

The received notification packet is held in pkg->buffer and not in pkg
itself. Fix this by using the correct buffer.

Fixes: 81a54b5e1986 ("thunderbolt: Let the connection manager handle all notifications")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkfront: Cache feature_persistent value before advertisement

commit fe8f65b018effbf473f53af3538d0c1878b8b329 upstream.

Xen blkfront advertises its support of the persistent grants feature
when it first setting up and when resuming in 'talk_to_blkback()'.
Then, blkback reads the advertised value when it connects with blkfront
and decides if it will use the persistent grants feature or not, and
advertises its decision to blkfront.  Blkfront reads the blkback's
decision and it also makes the decision for the use of the feature.

Commit 402c43ea6b34 ("xen-blkfront: Apply 'feature_persistent' parameter
when connect"), however, made the blkfront's read of the parameter for
disabling the advertisement, namely 'feature_persistent', to be done
when it negotiate, not when advertise.  Therefore blkfront advertises
without reading the parameter.  As the field for caching the parameter
value is zero-initialized, it always advertises as the feature is
disabled, so that the persistent grants feature becomes always disabled.

This commit fixes the issue by making the blkfront does parmeter caching
just before the advertisement.

Fixes: 402c43ea6b34 ("xen-blkfront: Apply 'feature_persistent' parameter when connect")
Cc: <stable@vger.kernel.org> # 5.10.x
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220831165824.94815-4-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkfront: Advertise feature-persistent as user requested

commit 9f5e0fe5d05f7e8de7f39b2b10089834eb0ff787 upstream.

The advertisement of the persistent grants feature (writing
'feature-persistent' to xenbus) should mean not the decision for using
the feature but only the availability of the feature.  However, commit
74a852479c68 ("xen-blkfront: add a parameter for disabling of persistent
grants") made a field of blkfront, which was a place for saving only the
negotiation result, to be used for yet another purpose: caching of the
'feature_persistent' parameter value.  As a result, the advertisement,
which should follow only the parameter value, becomes inconsistent.

This commit fixes the misuse of the semantic by making blkfront saves
the parameter value in a separate place and advertises the support based
on only the saved value.

Fixes: 74a852479c68 ("xen-blkfront: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220831165824.94815-3-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkback: Advertise feature-persistent as user requested

commit 06ba5d2e943e97bb66e75c152e87f1d2c7027a67 upstream.

The advertisement of the persistent grants feature (writing
'feature-persistent' to xenbus) should mean not the decision for using
the feature but only the availability of the feature.  However, commit
aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent
grants") made a field of blkback, which was a place for saving only the
negotiation result, to be used for yet another purpose: caching of the
'feature_persistent' parameter value.  As a result, the advertisement,
which should follow only the parameter value, becomes inconsistent.

This commit fixes the misuse of the semantic by making blkback saves the
parameter value in a separate place and advertises the support based on
only the saved value.

Fixes: aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220831165824.94815-2-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: pagewalk: Fix race between unmap and page walker

[ Upstream commit 8782fb61cc848364e1e1599d76d3c9dd58a1cc06 ]

The mmap lock protects the page walker from changes to the page tables
during the walk.  However a read lock is insufficient to protect those
areas which don't have a VMA as munmap() detaches the VMAs before
downgrading to a read lock and actually tearing down PTEs/page tables.

For users of walk_page_range() the solution is to simply call pte_hole()
immediately without checking the actual page tables when a VMA is not
present. We now never call __walk_page_range() without a valid vma.

For walk_page_range_novma() the locking requirements are tightened to
require the mmap write lock to be taken, and then walking the pgd
directly with 'no_vma' set.

This in turn means that all page walkers either have a valid vma, or
it's that special 'novma' case for page table debugging.  As a result,
all the odd '(!walk->vma && !walk->no_vma)' tests can be removed.

Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/grants: prevent integer overflow in gnttab_dma_alloc_pages()

[ Upstream commit e9ea0b30ada008f4e65933f449db6894832cb242 ]

The change from kcalloc() to kvmalloc() means that arg->nr_pages
might now be large enough that the "args->nr_pages << PAGE_SHIFT" can
result in an integer overflow.

Fixes: b3f7931f5c61 ("xen/gntdev: switch from kcalloc() to kvcalloc()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/YxDROJqu/RPvR0bi@kili
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86: Mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES

[ Upstream commit 0204750bd4c6ccc2fb7417618477f10373b33f56 ]

KVM should not claim to virtualize unknown IA32_ARCH_CAPABILITIES
bits. When kvm_get_arch_capabilities() was originally written, there
were only a few bits defined in this MSR, and KVM could virtualize all
of them. However, over the years, several bits have been defined that
KVM cannot just blindly pass through to the guest without additional
work (such as virtualizing an MSR promised by the
IA32_ARCH_CAPABILITES feature bit).

Define a mask of supported IA32_ARCH_CAPABILITIES bits, and mask off
any other bits that are set in the hardware MSR.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Fixes: 5b76a3cff011 ("KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20220830174947.2182144-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: pca953x: Add mutex_lock for regcache sync in PM

[ Upstream commit 518e26f11af2fe4f5bebf9a0351595d508c7077f ]

The regcache sync will set the cache_bypass = true, at that
time, when there is regmap write operation, it will bypass
the regmap cache, then the regcache sync will write back the
value from cache to register, which is not as our expectation.

Though regmap already use its internal lock to avoid such issue,
but this driver force disable the regmap internal lock in its
regmap config: disable_locking = true

To avoid this issue, use the driver's own lock to do the protect
in system PM.

Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (gpio-fan) Fix array out of bounds access

[ Upstream commit f233d2be38dbbb22299192292983037f01ab363c ]

The driver does not check if the cooling state passed to
gpio_fan_set_cur_state() exceeds the maximum cooling state as
stored in fan_data->num_speeds. Since the cooling state is later
used as an array index in set_fan_speed(), an array out of bounds
access can occur.
This can be exploited by setting the state of the thermal cooling device
to arbitrary values, causing for example a kernel oops when unavailable
memory is accessed this way.

Example kernel oops:
[  807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064
[  807.987369] Mem abort info:
[  807.987398]   ESR = 0x96000005
[  807.987428]   EC = 0x25: DABT (current EL), IL = 32 bits
[  807.987477]   SET = 0, FnV = 0
[  807.987507]   EA = 0, S1PTW = 0
[  807.987536]   FSC = 0x05: level 1 translation fault
[  807.987570] Data abort info:
[  807.987763]   ISV = 0, ISS = 0x00000005
[  807.987801]   CM = 0, WnR = 0
[  807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000
[  807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[  807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[  807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6
[  807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G         C        5.15.56-v8+ #1575
[  807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[  807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan]
[  807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan]
[  807.988691] sp : ffffffc008cf3bd0
[  807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000
[  807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920
[  807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c
[  807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000
[  807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70
[  807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[  807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c
[  807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009
[  807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8
[  807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060
[  807.989084] Call trace:
[  807.989091]  set_fan_speed.part.5+0x34/0x80 [gpio_fan]
[  807.989113]  gpio_fan_set_cur_state+0x34/0x50 [gpio_fan]
[  807.989199]  cur_state_store+0x84/0xd0
[  807.989221]  dev_attr_store+0x20/0x38
[  807.989262]  sysfs_kf_write+0x4c/0x60
[  807.989282]  kernfs_fop_write_iter+0x130/0x1c0
[  807.989298]  new_sync_write+0x10c/0x190
[  807.989315]  vfs_write+0x254/0x378
[  807.989362]  ksys_write+0x70/0xf8
[  807.989379]  __arm64_sys_write+0x24/0x30
[  807.989424]  invoke_syscall+0x4c/0x110
[  807.989442]  el0_svc_common.constprop.3+0xfc/0x120
[  807.989458]  do_el0_svc+0x2c/0x90
[  807.989473]  el0_svc+0x24/0x60
[  807.989544]  el0t_64_sync_handler+0x90/0xb8
[  807.989558]  el0t_64_sync+0x1a0/0x1a4
[  807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416)
[  807.989627] ---[ end trace 8ded4c918658445b ]---

Fix this by checking the cooling state and return an error if it
exceeds the maximum cooling state.

Tested on a Raspberry Pi 3.

Fixes: b5cf88e46bad ("(gpio-fan): Add thermal control hooks")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220830011101.178843-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: bcm: rpi: Add missing newline

[ Upstream commit 13b5cf8d6a0d4a5d289e1ed046cadc63b416db85 ]

Some log messages lacks the final newline. So add them.

Fixes: 93d2725affd6 ("clk: bcm: rpi: Discover the firmware clocks")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220713154953.3336-3-stefan.wahren@i2se.com
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ivan T. Ivanov <iivanov@suse.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: bcm: rpi: Prevent out-of-bounds access

[ Upstream commit bc163555603e4ae9c817675ad80d618a4cdbfa2d ]

The while loop in raspberrypi_discover_clocks() relies on the assumption
that the id of the last clock element is zero. Because this data comes
from the Videocore firmware and it doesn't guarantuee such a behavior
this could lead to out-of-bounds access. So fix this by providing
a sentinel element.

Fixes: 93d2725affd6 ("clk: bcm: rpi: Discover the firmware clocks")
Link: https://github.com/raspberrypi/firmware/issues/1688
Suggested-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220713154953.3336-2-stefan.wahren@i2se.com
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ivan T. Ivanov <iivanov@suse.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()

[ Upstream commit b7fa6242f3e035308a76284560e4f918dad9b017 ]

We should have 'n', then 'size', not the opposite.
This is harmless because the 2 values are just multiplied, but having
the correct order silence a (unpublished yet) smatch warning.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/49d726d11964ca0e3757bdb5659e3b3eaa1572b5.1653081643.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: bcm: rpi: Fix error handling of raspberrypi_fw_get_rate

[ Upstream commit 35f73cca1cecda0c1f8bb7d8be4ce5cd2d46ae8c ]

The function raspberrypi_fw_get_rate (e.g. used for the recalc_rate
hook) can fail to get the clock rate from the firmware. In this case
we cannot return a signed error value, which would be casted to
unsigned long. Fix this by returning 0 instead.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220625083643.4012-1-stefan.wahren@i2se.com
Fixes: 4e85e535e6cc ("clk: bcm283x: add driver interfacing with Raspberry Pi's firmware")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: rk805-pwrkey - fix module autoloading

[ Upstream commit 99077ad668ddd9b4823cc8ce3f3c7a3fc56f6fd9 ]

Add the module alias so the rk805-pwrkey driver will
autoload when built as a module.

Fixes: 5a35b85c2d92 ("Input: add power key driver for Rockchip RK805 PMIC")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20220612225437.3628788-1-pbrobinson@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: core: Fix runtime PM sequence in clk_core_unprepare()

[ Upstream commit 4b592061f7b3971c70e8b72fc42aaead47c24701 ]

In the original commit 9a34b45397e5 ("clk: Add support for runtime PM"),
the commit message mentioned that pm_runtime_put_sync() would be done
at the end of clk_core_unprepare(). This mirrors the operations in
clk_core_prepare() in the opposite order.

However, the actual code that was added wasn't in the order the commit
message described. Move clk_pm_runtime_put() to the end of
clk_core_unprepare() so that it is in the correct order.

Fixes: 9a34b45397e5 ("clk: Add support for runtime PM")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220822081424.1310926-3-wenst@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops"

[ Upstream commit abb5f3f4b1f5f0ad50eb067a00051d3587dec9fb ]

This reverts commit 35b0fac808b95eea1212f8860baf6ad25b88b087. Alexander
reports that it causes boot failures on i.MX8M Plus based boards
(specifically imx8mp-tqma8mpql-mba8mpxl.dts).

Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Chen-Yu Tsai <wenst@chromium.org>
Fixes: 35b0fac808b9 ("clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops")
Link: https://lore.kernel.org/r/12115951.O9o76ZdvQC@steina-w
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220831175326.2523912-1-sboyd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops

[ Upstream commit 35b0fac808b95eea1212f8860baf6ad25b88b087 ]

In the previous commits that added CLK_OPS_PARENT_ENABLE, support for
this flag was only added to rate change operations (rate setting and
reparent) and disabling unused subtree. It was not added to the
clock gate related operations. Any hardware driver that needs it for
these operations will either see bogus results, or worse, hang.

This has been seen on MT8192 and MT8195, where the imp_ii2_* clk
drivers set this, but dumping debugfs clk_summary would cause it
to hang.

Fixes: fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)")
Fixes: a4b3518d146f ("clk: core: support clocks which requires parents enable (part 1)")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220822081424.1310926-2-wenst@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/reg: Fix spelling mistake "Unsupport" -> "Unsupported"

[ Upstream commit 233f56745be446b289edac2ba8184c09365c005e ]

There is a spelling mistake in a gvt_vgpu_err error message. Fix it.

Fixes: 695fbc08d80f ("drm/i915/gvt: replace the gvt_err with gvt_vgpu_err")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220315202449.2952845-1-colin.i.king@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: VMX: Heed the 'msr' argument in msr_write_intercepted()

[ Upstream commit 020dac4187968535f089f83f376a72beb3451311 ]

Regardless of the 'msr' argument passed to the VMX version of
msr_write_intercepted(), the function always checks to see if a
specific MSR (IA32_SPEC_CTRL) is intercepted for write.  This behavior
seems unintentional and unexpected.

Modify the function so that it checks to see if the provided 'msr'
index is intercepted for write.

Fixes: 67f4b9969c30 ("KVM: nVMX: Handle dynamic MSR intercept toggling")
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220810213050.2655000-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: fix small mempool leak in SMB2_negotiate()

commit 27893dfc1285f80f80f46b3b8c95f5d15d2e66d0 upstream.

In some cases of failure (dialect mismatches) in SMB2_negotiate(), after
the request is sent, the checks would return -EIO when they should be
rather setting rc = -EIO and jumping to neg_exit to free the response
buffer from mempool.

Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Cc: stable@vger.kernel.org
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: fix alloc->vma_vm_mm null-ptr dereference

commit 1da52815d5f1b654c89044db0cdc6adce43da1f1 upstream.

Syzbot reported a couple issues introduced by commit 44e602b4e52f
("binder_alloc: add missing mmap_lock calls when using the VMA"), in
which we attempt to acquire the mmap_lock when alloc->vma_vm_mm has not
been initialized yet.

This can happen if a binder_proc receives a transaction without having
previously called mmap() to setup the binder_proc->alloc space in [1].
Also, a similar issue occurs via binder_alloc_print_pages() when we try
to dump the debugfs binder stats file in [2].

Sample of syzbot's crash report:
  ==================================================================
  KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f]
  CPU: 0 PID: 3755 Comm: syz-executor229 Not tainted 6.0.0-rc1-next-20220819-syzkaller #0
  syz-executor229[3755] cmdline: ./syz-executor2294415195
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
  RIP: 0010:__lock_acquire+0xd83/0x56d0 kernel/locking/lockdep.c:4923
  [...]
  Call Trace:
   <TASK>
   lock_acquire kernel/locking/lockdep.c:5666 [inline]
   lock_acquire+0x1ab/0x570 kernel/locking/lockdep.c:5631
   down_read+0x98/0x450 kernel/locking/rwsem.c:1499
   mmap_read_lock include/linux/mmap_lock.h:117 [inline]
   binder_alloc_new_buf_locked drivers/android/binder_alloc.c:405 [inline]
   binder_alloc_new_buf+0xa5/0x19e0 drivers/android/binder_alloc.c:593
   binder_transaction+0x242e/0x9a80 drivers/android/binder.c:3199
   binder_thread_write+0x664/0x3220 drivers/android/binder.c:3986
   binder_ioctl_write_read drivers/android/binder.c:5036 [inline]
   binder_ioctl+0x3470/0x6d00 drivers/android/binder.c:5323
   vfs_ioctl fs/ioctl.c:51 [inline]
   __do_sys_ioctl fs/ioctl.c:870 [inline]
   __se_sys_ioctl fs/ioctl.c:856 [inline]
   __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd
   [...]
  ==================================================================

Fix these issues by setting up alloc->vma_vm_mm pointer during open()
and caching directly from current->mm. This guarantees we have a valid
reference to take the mmap_lock during scenarios described above.

[1] https://syzkaller.appspot.com/bug?extid=f7dc54e5be28950ac459
[2] https://syzkaller.appspot.com/bug?extid=a75ebe0452711c9e56d9

Fixes: 44e602b4e52f ("binder_alloc: add missing mmap_lock calls when using the VMA")
Cc: <stable@vger.kernel.org> # v5.15+
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: syzbot+f7dc54e5be28950ac459@syzkaller.appspotmail.com
Reported-by: syzbot+a75ebe0452711c9e56d9@syzkaller.appspotmail.com
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220829201254.1814484-2-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: fix UAF of ref->proc caused by race condition

commit a0e44c64b6061dda7e00b7c458e4523e2331b739 upstream.

A transaction of type BINDER_TYPE_WEAK_HANDLE can fail to increment the
reference for a node. In this case, the target proc normally releases
the failed reference upon close as expected. However, if the target is
dying in parallel the call will race with binder_deferred_release(), so
the target could have released all of its references by now leaving the
cleanup of the new failed reference unhandled.

The transaction then ends and the target proc gets released making the
ref->proc now a dangling pointer. Later on, ref->node is closed and we
attempt to take spin_lock(&ref->proc->inner_lock), which leads to the
use-after-free bug reported below. Let's fix this by cleaning up the
failed reference on the spot instead of relying on the target to do so.

  ==================================================================
  BUG: KASAN: use-after-free in _raw_spin_lock+0xa8/0x150
  Write of size 4 at addr ffff5ca207094238 by task kworker/1:0/590

  CPU: 1 PID: 590 Comm: kworker/1:0 Not tainted 5.19.0-rc8 #10
  Hardware name: linux,dummy-virt (DT)
  Workqueue: events binder_deferred_func
  Call trace:
   dump_backtrace.part.0+0x1d0/0x1e0
   show_stack+0x18/0x70
   dump_stack_lvl+0x68/0x84
   print_report+0x2e4/0x61c
   kasan_report+0xa4/0x110
   kasan_check_range+0xfc/0x1a4
   __kasan_check_write+0x3c/0x50
   _raw_spin_lock+0xa8/0x150
   binder_deferred_func+0x5e0/0x9b0
   process_one_work+0x38c/0x5f0
   worker_thread+0x9c/0x694
   kthread+0x188/0x190
   ret_from_fork+0x10/0x20

Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Cc: stable <stable@kernel.org> # 4.14+
Link: https://lore.kernel.org/r/20220801182511.3371447-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Fix inconsistent sd3_bus_mode at UHS-I SD voltage switch failure

commit 63f1560930e4e1c4f6279b8ae715c9841fe1a6d3 upstream.

If re-initialization results is a different signal voltage, because the
voltage switch failed previously, but not this time (or vice versa), then
sd3_bus_mode will be inconsistent with the card because the SD_SWITCH
command is done only upon first initialization.

Fix by always reading SD_SWITCH information during re-initialization, which
also means it does not need to be re-read later for the 1.8V fixup
workaround.

Note, brief testing showed SD_SWITCH took about 1.8ms to 2ms which added
about 1% to 1.5% to the re-initialization time, so it's not particularly
significant.

Reported-by: Seunghui Lee <sh043.lee@samsung.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Seunghui Lee <sh043.lee@samsung.com>
Tested-by: Seunghui Lee <sh043.lee@samsung.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220815073321.63382-3-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Fix UHS-I SD 1.8V workaround branch

commit 15c56208c79c340686869c31595c209d1431c5e8 upstream.

When introduced, upon success, the 1.8V fixup workaround in
mmc_sd_init_card() would branch to practically the end of the function, to
a label named "done". Unfortunately, perhaps due to the label name, over
time new code has been added that really should have come after "done" not
before it. Let's fix the problem by moving the label to the correct place
and rename it "cont".

Fixes: 045d705dc1fb ("mmc: core: Enable the MMC host software queue for the SD card")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Seunghui Lee <sh043.lee@samsung.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220815073321.63382-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id

commit 001047ea241a9646010b2744451dfbc7289542f3 upstream.

works perfectly with:
modprobe ftdi_sio
echo "0590 00b2" | tee
/sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null

but doing this every reboot is a pain in the ass.

Signed-off-by: Niek Nooijens <niek.nooijens@omron.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: fastrpc: fix memory corruption on open

commit d245f43aab2b61195d8ebb64cef7b5a08c590ab4 upstream.

The probe session-duplication overflow check incremented the session
count also when there were no more available sessions so that memory
beyond the fixed-size slab-allocated session array could be corrupted in
fastrpc_session_alloc() on open().

Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: stable@vger.kernel.org # 5.1
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220829080531.29681-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: fastrpc: fix memory corruption on probe

commit 9baa1415d9abdd1e08362ea2dcfadfacee8690b5 upstream.

Add the missing sanity check on the probed-session count to avoid
corrupting memory beyond the fixed-size slab-allocated session array
when there are more than FASTRPC_MAX_SESSIONS sessions defined in the
devicetree.

Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: stable@vger.kernel.org # 5.1
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220829080531.29681-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: mcp3911: use correct formula for AD conversion

commit 9e2238e3ae40d371a1130226e0e740aa1601efa6 upstream.

The ADC conversion is actually not rail-to-rail but with a factor 1.5.
Make use of this factor when calculating actual voltage.

Fixes: 3a89b289df5d ("iio: adc: add support for mcp3911")
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220722130726.7627-4-marcus.folkesson@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ad7292: Prevent regulator double disable

commit 22b4277641c6823ec03d5b1cd82628e5e53e75b7 upstream.

The ad7292 tries to add an devm_action for disabling a regulator at
device detach using devm_add_action_or_reset(). The
devm_add_action_or_reset() does call the release function should adding
action fail. The driver inspects the value returned by
devm_add_action_or_reset() and manually calls regulator_disable() if
adding the action has failed. This leads to double disable and messes
the enable count for regulator.

Do not manually call disable if devm_add_action_or_reset() fails.

Fixes: 506d2e317a0a ("iio: adc: Add driver support for AD7292")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Tested-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://lore.kernel.org/r/Yv9O+9sxU7gAv3vM@fedora
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING flag

commit 98e01215708b6d416345465c09dce2bd4868c67a upstream.

syzbot is reporting hung task at __input_unregister_device() [1], for
iforce_close() waiting at wait_event_interruptible() with dev->mutex held
is blocking input_disconnect_device() from __input_unregister_device().

It seems that the cause is simply that commit c2b27ef672992a20 ("Input:
iforce - wait for command completion when closing the device") forgot to
call wake_up() after clear_bit().

Fix this problem by introducing a helper that calls clear_bit() followed
by wake_up_all().

Reported-by: syzbot <syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com>
Fixes: c2b27ef672992a20 ("Input: iforce - wait for command completion when closing the device")
Tested-by: syzbot <syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Co-developed-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/887021c3-4f13-40ce-c8b9-aa6e09faa3a7@I-love.SAKURA.ne.jp
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete

commit d5a2e0834364377a5d5a2fff1890a0b3f0bafd1f upstream.

When the user initializes the uart port, and waits for the transmit
engine to complete in lpuart32_set_termios(), if the UART TX fifo has
dirty data and the UARTMODIR enable the flow control, the TX fifo may
never be empty. So here we should disable the flow control first to make
sure the transmit engin can complete.

Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20220821101527.10066-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

musb: fix USB_MUSB_TUSB6010 dependency

commit a3f2fd22743fc56dd5e3896a3fbddd276df1577f upstream.

Turning on NOP_USB_XCEIV as builtin broke the TUSB6010 driver because
of an older issue with the depencency.

It is not necessary to forbid NOP_USB_XCEIV=y in combination with
USB_MUSB_HDRC=m, but only the reverse, which causes the link failure
from the original Kconfig change.

Use the correct dependency to still allow NOP_USB_XCEIV=n or
NOP_USB_XCEIV=y but forbid NOP_USB_XCEIV=m when USB_MUSB_HDRC=m
to fix the multi_v7_defconfig for tusb.

Fixes: ab37a7a890c1 ("ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in")
Fixes: c0442479652b ("usb: musb: Fix randconfig build issues for Kconfig options")
Cc: stable <stable@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220818135737.3143895-10-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: Clear selection before changing the font

commit 566f9c9f89337792070b5a6062dff448b3e7977f upstream.

When changing the console font with ioctl(KDFONTOP) the new font size
can be bigger than the previous font. A previous selection may thus now
be outside of the new screen size and thus trigger out-of-bounds
accesses to graphics memory if the selection is removed in
vc_do_resize().

Prevent such out-of-memory accesses by dropping the selection before the
various con_font_set() console handlers are called.

Reported-by: syzbot+14b0e8f3fd1612e35350@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Tested-by: Khalid Masum <khalid.masum.92@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/YuV9apZGNmGfjcor@p100
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: align syscall table for ppc32

commit c7acee3d2f128a38b68fb7af85dbbd91bfd0b4ad upstream.

Christophe Leroy reported that commit 7b4537199a4a ("kbuild: link
symbol CRCs at final link,  removing CONFIG_MODULE_REL_CRCS") broke
mpc85xx_defconfig + CONFIG_RELOCATABLE=y.

    LD      vmlinux
    SYSMAP  System.map
    SORTTAB vmlinux
    CHKREL  vmlinux
  WARNING: 451 bad relocations
  c0b312a9 R_PPC_UADDR32     .head.text-0x3ff9ed54
  c0b312ad R_PPC_UADDR32     .head.text-0x3ffac224
  c0b312b1 R_PPC_UADDR32     .head.text-0x3ffb09f4
  c0b312b5 R_PPC_UADDR32     .head.text-0x3fe184dc
  c0b312b9 R_PPC_UADDR32     .head.text-0x3fe183a8
      ...

The compiler emits a bunch of R_PPC_UADDR32, which is not supported by
arch/powerpc/kernel/reloc_32.S.

The reason is there exists an unaligned symbol.

  $ powerpc-linux-gnu-nm -n vmlinux
    ...
  c0b31258 d spe_aligninfo
  c0b31298 d __func__.0
  c0b312a9 D sys_call_table
  c0b319b8 d __func__.0

Commit 7b4537199a4a is not the root cause. Even before that, I can
reproduce the same issue for mpc85xx_defconfig + CONFIG_RELOCATABLE=y
+ CONFIG_MODVERSIONS=n.

It is just that nobody noticed because when CONFIG_MODVERSIONS is
enabled, a __crc_* symbol inserted before sys_call_table was hiding the
unalignment issue.

Adding alignment to the syscall table for ppc32 fixes the issue.

Cc: stable@vger.kernel.org
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Trim change log discussion, add Cc stable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/lkml/38605f6a-a568-f884-f06f-ea4da5b214f0@csgroup.eu/
Link: https://lore.kernel.org/r/20220820165129.1147589-1-masahiroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: add firmware dependency

commit b2fa9e13bbf101c662c4cd974608242a0db98cfc upstream.

The old rtl8188eu module, removed in commit 55dfa29b43d2 ("staging:
rtl8188eu: remove rtl8188eu driver from staging dir") (Linux kernel
v5.15-rc1), required (through a MODULE_FIRMWARE call()) the
rtlwifi/rtl8188eufw.bin firmware file, which the new r8188eu driver no
longer requires.

I have tested a few RTL8188EUS-based Wi-Fi cards and, while supported by
both drivers, they do not work when using the new one and the firmware
wasn't manually loaded. According to Larry Finger, the module
maintainer, all such cards need the firmware and the driver should
depend on it (see the linked mails).

Add a proper MODULE_FIRMWARE() call, like it was done in the old driver.

Thanks to Greg Kroah-Hartman and Larry Finger for quick responses to my
questions.

Cc: stable <stable@kernel.org>
Link: https://answers.launchpad.net/ubuntu/+source/linux-meta-hwe-5.15/+question/702611
Link: https://lore.kernel.org/lkml/YukkBu3TNODO3or9@nx64de-df6d00/
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Link: https://lore.kernel.org/r/YulcdKfhA8dPQ78s@nx64de-df6d00
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: fix use after free bugs

commit e230a4455ac3e9b112f0367d1b8e255e141afae0 upstream.

_Read/Write_MACREG callbacks are NULL so the read/write_macreg_hdl()
functions don't do anything except free the "pcmd" pointer.  It
results in a use after free.  Delete them.

Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Cc: stable <stable@kernel.org>
Reported-by: Zheng Wang <hackerzheng666@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Yw4ASqkYcUhUfoY2@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: fsl_lpuart: RS485 RTS polariy is inverse

commit 846651eca073e2e02e37490a4a52752415d84781 upstream.

The setting of RS485 RTS polarity is inverse in the current driver.

When the property of 'rs485-rts-active-low' is enabled in the dts node,
the RTS signal should be LOW during sending. Otherwise, if there is no
such a property, the RTS should be HIGH during sending.

Fixes: 03895cf41d18 ("tty: serial: fsl_lpuart: Add support for RS-485")
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Diaz <nicolas.diaz@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20220805144529.604856-1-shenwei.wang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soundwire: qcom: fix device status array range

[ Upstream commit 4ef3f2aff1267bfa6d5a90c42a30b927b8aa239b ]

This patch updates device status array range from 11 to 12 as we will
be reading status from device number 0 to device number 11 inclusive.

Without this patch we can potentially access status array out of range
during auto-enumeration.

Fixes: aa1262ca6695 ("soundwire: qcom: Check device status before reading devid")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220708104747.8722-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: Remove redundant refcount increase

[ Upstream commit a8424a9b4522a3ab9f32175ad6d848739079071f ]

For passive connections, the refcount increment has been done in
smc_clcsock_accept()-->smc_sock_alloc().

Fixes: 3b2dec2603d5 ("net/smc: restructure client and server code in af_smc")
Signed-off-by: Yacan Liu <liuyacan@corp.netease.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220830152314.838736-1-liuyacan@corp.netease.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb"

[ Upstream commit 0b4f688d53fdc2a731b9d9cdf0c96255bc024ea6 ]

This reverts commit 90fabae8a2c225c4e4936723c38857887edde5cc.

Patch was applied hastily, revert and let the v2 be reviewed.

Fixes: 90fabae8a2c2 ("sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb")
Link: https://lore.kernel.org/all/87wnao2ha3.fsf@toke.dk/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-race around challenge_timestamp

[ Upstream commit 8c70521238b7863c2af607e20bcba20f974c969b ]

challenge_timestamp can be read an written by concurrent threads.

This was expected, but we need to annotate the race to avoid potential issues.

Following patch moves challenge_timestamp and challenge_count
to per-netns storage to provide better isolation.

Fixes: 354e4aa391ed ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb

[ Upstream commit 90fabae8a2c225c4e4936723c38857887edde5cc ]

When the GSO splitting feature of sch_cake is enabled, GSO superpackets
will be broken up and the resulting segments enqueued in place of the
original skb. In this case, CAKE calls consume_skb() on the original skb,
but still returns NET_XMIT_SUCCESS. This can confuse parent qdiscs into
assuming the original skb still exists, when it really has been freed. Fix
this by adding the __NET_XMIT_STOLEN flag to the return value in this case.

Fixes: 0c850344d388 ("sch_cake: Conditionally split GSO segments")
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18231
Link: https://lore.kernel.org/r/20220831092103.442868-1-toke@toke.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kcm: fix strp_init() order and cleanup

[ Upstream commit 8fc29ff3910f3af08a7c40a75d436b5720efe2bf ]

strp_init() is called just a few lines above this csk->sk_user_data
check, it also initializes strp->work etc., therefore, it is
unnecessary to call strp_done() to cancel the freshly initialized
work.

And if sk_user_data is already used by KCM, psock->strp should not be
touched, particularly strp->work state, so we need to move strp_init()
after the csk->sk_user_data check.

This also makes a lockdep warning reported by syzbot go away.

Reported-and-tested-by: syzbot+9fc084a4348493ef65d2@syzkaller.appspotmail.com
Reported-by: syzbot+e696806ef96cdd2d87cd@syzkaller.appspotmail.com
Fixes: e5571240236c ("kcm: Check if sk_user_data already set in kcm_attach")
Fixes: dff8baa26117 ("kcm: Call strp_stop before strp_done in kcm_attach")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20220827181314.193710-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxbf_gige: compute MDIO period based on i1clk

[ Upstream commit 3a1a274e933fca73fdc960cb1f60636cd285a265 ]

This patch adds logic to compute the MDIO period based on
the i1clk, and thereafter write the MDIO period into the YU
MDIO config register. The i1clk resource from the ACPI table
is used to provide addressing to YU bootrecord PLL registers.
The values in these registers are used to compute MDIO period.
If the i1clk resource is not present in the ACPI table, then
the current default hardcorded value of 430Mhz is used.
The i1clk clock value of 430MHz is only accurate for boards
with BF2 mid bin and main bin SoCs. The BF2 high bin SoCs
have i1clk = 500MHz, but can support a slower MDIO period.

Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20220826155916.12491-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ethernet: rocker: fix sleep in atomic context bug in neigh_timer_handler

[ Upstream commit c0955bf957be4bead01fae1d791476260da7325d ]

The function neigh_timer_handler() is a timer handler that runs in an
atomic context. When used by rocker, neigh_timer_handler() calls
"kzalloc(.., GFP_KERNEL)" that may sleep. As a result, the sleep in
atomic context bug will happen. One of the processes is shown below:

ofdpa_fib4_add()
 ...
 neigh_add_timer()

(wait a timer)

neigh_timer_handler()
 neigh_release()
  neigh_destroy()
   rocker_port_neigh_destroy()
    rocker_world_port_neigh_destroy()
     ofdpa_port_neigh_destroy()
      ofdpa_port_ipv4_neigh()
       kzalloc(sizeof(.., GFP_KERNEL) //may sleep

This patch changes the gfp_t parameter of kzalloc() from GFP_KERNEL to
GFP_ATOMIC in order to mitigate the bug.

Fixes: 00fc0c51e35b ("rocker: Change world_ops API and implementation to be switchdev independant")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: fix netdevice reference leaks in attach_default_qdiscs()

[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]

In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails
to attach qdisc because there is no memory in attach_one_default_qdisc().
Then dev->qdisc will be noop_qdisc by default. But the other queues may be
able to successfully attach to default qdisc.

In this case, the fallback to noqueue process will be triggered. If the
original attached qdisc is not released and a new one is directly
attached, this will cause netdevice reference leaks.

The following is the bug log:

veth0: default qdisc (fq_codel) fail, fallback to noqueue
unregister_netdevice: waiting for veth0 to become free. Usage count = 32
leaked reference.
 qdisc_alloc+0x12e/0x210
 qdisc_create_dflt+0x62/0x140
 attach_one_default_qdisc.constprop.41+0x44/0x70
 dev_activate+0x128/0x290
 __dev_open+0x12a/0x190
 __dev_change_flags+0x1a2/0x1f0
 dev_change_flags+0x23/0x60
 do_setlink+0x332/0x1150
 __rtnl_newlink+0x52f/0x8e0
 rtnl_newlink+0x43/0x70
 rtnetlink_rcv_msg+0x140/0x3b0
 netlink_rcv_skb+0x50/0x100
 netlink_unicast+0x1bb/0x290
 netlink_sendmsg+0x37c/0x4e0
 sock_sendmsg+0x5f/0x70
 ____sys_sendmsg+0x208/0x280

Fix this bug by clearing any non-noop qdiscs that may have been assigned
before trying to re-attach.

Fixes: bf6dba76d278 ("net: sched: fallback to qdisc noqueue if default qdisc setup fail")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20220826090055.24424-1-wanghai38@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: tbf: don't call qdisc_put() while holding tree lock

[ Upstream commit b05972f01e7d30419987a1f221b5593668fd6448 ]

The issue is the same to commit c2999f7fb05b ("net: sched: multiq: don't
call qdisc_put() while holding tree lock"). Qdiscs call qdisc_put() while
holding sch tree spinlock, which results sleeping-while-atomic BUG.

Fixes: c266f64dbfa2 ("net: sched: protect block state with mutex")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20220826013930.340121-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: xrs700x: Use irqsave variant for u64 stats update

[ Upstream commit 3f8ae9fe0409698799e173f698b714f34570b64b ]

xrs700x_read_port_counters() updates the stats from a worker using the
u64_stats_update_begin() version. This is okay on 32-UP since on the
reader side preemption is disabled.
On 32bit-SMP the writer can be preempted by the reader at which point
the reader will spin on the seqcount until writer continues and
completes the update.

Assigning the mib_mutex mutex to the underlying seqcount would ensure
proper synchronisation. The API for that on the u64_stats_init() side
isn't available. Since it is the only user, just use disable interrupts
during the update.

Use u64_stats_update_begin_irqsave() on the writer side to ensure an
uninterrupted update.

Fixes: ee00b24f32eb8 ("net: dsa: add Arrow SpeedChips XRS700x driver")
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

openvswitch: fix memory leak at failed datapath creation

[ Upstream commit a87406f4adee9c53b311d8a1ba2849c69e29a6d0 ]

ovs_dp_cmd_new()->ovs_dp_change()->ovs_dp_set_upcall_portids()
allocates array via kmalloc.
If for some reason new_vport() fails during ovs_dp_cmd_new()
dp->upcall_portids must be freed.
Add missing kfree.

Kmemleak example:
unreferenced object 0xffff88800c382500 (size 64):
  comm "dump_state", pid 323, jiffies 4294955418 (age 104.347s)
  hex dump (first 32 bytes):
    5e c2 79 e4 1f 7a 38 c7 09 21 38 0c 80 88 ff ff  ^.y..z8..!8.....
    03 00 00 00 0a 00 00 00 14 00 00 00 28 00 00 00  ............(...
  backtrace:
    [<0000000071bebc9f>] ovs_dp_set_upcall_portids+0x38/0xa0
    [<000000000187d8bd>] ovs_dp_change+0x63/0xe0
    [<000000002397e446>] ovs_dp_cmd_new+0x1f0/0x380
    [<00000000aa06f36e>] genl_family_rcv_msg_doit+0xea/0x150
    [<000000008f583bc4>] genl_rcv_msg+0xdc/0x1e0
    [<00000000fa10e377>] netlink_rcv_skb+0x50/0x100
    [<000000004959cece>] genl_rcv+0x24/0x40
    [<000000004699ac7f>] netlink_unicast+0x23e/0x360
    [<00000000c153573e>] netlink_sendmsg+0x24e/0x4b0
    [<000000006f4aa380>] sock_sendmsg+0x62/0x70
    [<00000000d0068654>] ____sys_sendmsg+0x230/0x270
    [<0000000012dacf7d>] ___sys_sendmsg+0x88/0xd0
    [<0000000011776020>] __sys_sendmsg+0x59/0xa0
    [<000000002e8f2dc1>] do_syscall_64+0x3b/0x90
    [<000000003243e7cb>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: b83d23a2a38b ("openvswitch: Introduce per-cpu upcall dispatch")
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Andrey Zhadchenko <andrey.zhadchenko@virtuozzo.com>
Link: https://lore.kernel.org/r/20220825020326.664073-1-andrey.zhadchenko@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: smsc911x: Stop and start PHY during suspend and resume

[ Upstream commit 3ce9f2bef75528936c78a7053301f5725f622f3a ]

Commit 744d23c71af3 ("net: phy: Warn about incorrect
mdio_bus_phy_resume() state") unveiled that the smsc911x driver was not
properly stopping and restarting the PHY during suspend/resume. Correct
that by indicating that the MAC is in charge of PHY PM operations and
ensure that all MDIO bus activity is quiescent during suspend.

Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Fixes: 2aa70f864955 ("net: smsc911x: Quieten netif during suspend")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220825023951.3220-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sparx5: fix handling uneven length packets in manual extraction

[ Upstream commit 7498a457ecf7ff2c4d379360aa8f24566bb1543e ]

Packets that are not of length divisible by 4 (e.g. 77, 78, 79) would
have the checksum included up to next multiple of 4 (a 77 bytes packet
would have 3 bytes of ethernet checksum included). The check for the
value expects it in host (Little) endian.

Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220825084955.684637-1-casper.casan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "xhci: turn off port power in shutdown"

[ Upstream commit 8531aa1659f7278d4f2ec7408cc000eaa8d85217 ]

This reverts commit 83810f84ecf11dfc5a9414a8b762c3501b328185.

Turning off port power in shutdown did cause issues such as a laptop not
proprly powering off, and some specific usb devies failing to enumerate the
subsequent boot after a warm reset.

So revert this.

Fixes: 83810f84ecf1 ("xhci: turn off port power in shutdown")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220825150840.132216-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: debugfs: fix return type in ht40allow_map_read()

[ Upstream commit d776763f48084926b5d9e25507a3ddb7c9243d5e ]

The return type is supposed to be ssize_t, which is signed long,
but "r" was declared as unsigned int.  This means that on 64 bit systems
we return positive values instead of negative error codes.

Fixes: 80a3511d70e8 ("cfg80211: add debugfs HT40 allow map")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YutvOQeJm0UjLhwU@kili
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: intel-nhlt: Correct the handling of fmt_config flexible array

[ Upstream commit 2e6481a3f3ee6234ce577454e1d88aca55f51d47 ]

The struct nhlt_format's fmt_config is a flexible array, it must not be
used as normal array.
When moving to the next nhlt_fmt_cfg we need to take into account the data
behind the ->config.caps (indicated by ->config.size).

Fixes: a864e8f159b13 ("ALSA: hda: intel-nhlt: verify config type")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Link: https://lore.kernel.org/r/20220823122405.18464-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: intel-nhlt: remove use of __func__ in dev_dbg

[ Upstream commit 6376ab02374822e1e8758a848ee736a182786a2e ]

The module and function information can be added with
'modprobe foo dyndbg=+pmf'

Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616220559.136160-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/display: avoid warnings when registering dual panel backlight

[ Upstream commit 868e8e5156a1f8d92ca83fdbac6fd52798650792 ]

Commit 20f85ef89d94 ("drm/i915/backlight: use unique backlight device
names") added support for multiple backlight devices on dual panel
systems, but did so with error handling on -EEXIST from
backlight_device_register(). Unfortunately, that triggered a warning in
dmesg all the way down from sysfs_add_file_mode_ns() and
sysfs_warn_dup().

Instead of optimistically always attempting to register with the default
name ("intel_backlight", which we have to retain for backward
compatibility), check if a backlight device with the name exists first,
and, if so, use the card and connector based name.

v2: reworked on top of the patch commit 20f85ef89d94
("drm/i915/backlight: use unique backlight device names")
v3: fixed the ref count leak(Jani N)

Fixes: 20f85ef89d94 ("drm/i915/backlight: use unique backlight device names")
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808035750.3111046-1-arun.r.murthy@intel.com
(cherry picked from commit 4234ea30051200fc6016de10e4d58369e60b38f1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/backlight: extract backlight code to a separate file

[ Upstream commit 6cc42fbeb150ff33b17cbf108713ca4be23994d8 ]

In a long overdue refactoring, split out backlight code to new
intel_backlight.[ch]. Simple code movement, leave renames for follow-up
work. No functional changes.

Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/97d310848f03061473b9b2328e2c5c4dcf263cfa.1629888677.git.jani.nikula@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ieee802154/adf7242: defer destroy_workqueue call

[ Upstream commit afe7116f6d3b888778ed6d95e3cf724767b9aedf ]

There is a possible race condition (use-after-free) like below

  (FREE)                     |  (USE)
  adf7242_remove             |  adf7242_channel
   cancel_delayed_work_sync  |
    destroy_workqueue (1)    |   adf7242_cmd_rx
                             |    mod_delayed_work (2)
                             |

The root cause for this race is that the upper layer (ieee802154) is
unaware of this detaching event and the function adf7242_channel can
be called without any checks.

To fix this, we can add a flag write at the beginning of adf7242_remove
and add flag check in adf7242_channel. Or we can just defer the
destructive operation like other commit 3e0588c291d6 ("hamradio: defer
ax25 kfree after unregister_netdev") which let the
ieee802154_unregister_hw() to handle the synchronization. This patch
takes the second option.

Fixes: 58e9683d1475 ("net: ieee802154: adf7242: Fix OCL calibration
runs")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20220808034224.12642-1-linma@zju.edu.cn
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, cgroup: Fix kernel BUG in purge_effective_progs

[ Upstream commit 7d6620f107bae6ed687ff07668e8e8f855487aa9 ]

Syzkaller reported a triggered kernel BUG as follows:

  ------------[ cut here ]------------
  kernel BUG at kernel/bpf/cgroup.c:925!
  invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
  CPU: 1 PID: 194 Comm: detach Not tainted 5.19.0-14184-g69dac8e431af #8
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
  RIP: 0010:__cgroup_bpf_detach+0x1f2/0x2a0
  Code: 00 e8 92 60 30 00 84 c0 75 d8 4c 89 e0 31 f6 85 f6 74 19 42 f6 84
  28 48 05 00 00 02 75 0e 48 8b 80 c0 00 00 00 48 85 c0 75 e5 <0f> 0b 48
  8b 0c5
  RSP: 0018:ffffc9000055bdb0 EFLAGS: 00000246
  RAX: 0000000000000000 RBX: ffff888100ec0800 RCX: ffffc900000f1000
  RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff888100ec4578
  RBP: 0000000000000000 R08: ffff888100ec0800 R09: 0000000000000040
  R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100ec4000
  R13: 000000000000000d R14: ffffc90000199000 R15: ffff888100effb00
  FS:  00007f68213d2b80(0000) GS:ffff88813bc80000(0000)
  knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 000055f74a0e5850 CR3: 0000000102836000 CR4: 00000000000006e0
  Call Trace:
   <TASK>
   cgroup_bpf_prog_detach+0xcc/0x100
   __sys_bpf+0x2273/0x2a00
   __x64_sys_bpf+0x17/0x20
   do_syscall_64+0x3b/0x90
   entry_SYSCALL_64_after_hwframe+0x63/0xcd
  RIP: 0033:0x7f68214dbcb9
  Code: 08 44 89 e0 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 48 89 f8 48 89
  f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
  f0 ff8
  RSP: 002b:00007ffeb487db68 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
  RAX: ffffffffffffffda RBX: 000000000000000b RCX: 00007f68214dbcb9
  RDX: 0000000000000090 RSI: 00007ffeb487db70 RDI: 0000000000000009
  RBP: 0000000000000003 R08: 0000000000000012 R09: 0000000b00000003
  R10: 00007ffeb487db70 R11: 0000000000000246 R12: 00007ffeb487dc20
  R13: 0000000000000004 R14: 0000000000000001 R15: 000055f74a1011b0
   </TASK>
  Modules linked in:
  ---[ end trace 0000000000000000 ]---

Repetition steps:

For the following cgroup tree,

  root
   |
  cg1
   |
  cg2

  1. attach prog2 to cg2, and then attach prog1 to cg1, both bpf progs
     attach type is NONE or OVERRIDE.
  2. write 1 to /proc/thread-self/fail-nth for failslab.
  3. detach prog1 for cg1, and then kernel BUG occur.

Failslab injection will cause kmalloc fail and fall back to
purge_effective_progs. The problem is that cg2 have attached another prog,
so when go through cg2 layer, iteration will add pos to 1, and subsequent
operations will be skipped by the following condition, and cg will meet
NULL in the end.

  `if (pos && !(cg->bpf.flags[atype] & BPF_F_ALLOW_MULTI))`

The NULL cg means no link or prog match, this is as expected, and it's not
a bug. So here just skip the no match situation.

Fixes: 4c46091ee985 ("bpf: Fix KASAN use-after-free Read in compute_effective_progs")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220813134030.1972696-1-pulehui@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Restrict bpf_sys_bpf to CAP_PERFMON

[ Upstream commit 14b20b784f59bdd95f6f1cfb112c9818bcec4d84 ]

The verifier cannot perform sufficient validation of any pointers passed
into bpf_attr and treats them as integers rather than pointers. The helper
will then read from arbitrary pointers passed into it. Restrict the helper
to CAP_PERFMON since the security model in BPF of arbitrary kernel read is
CAP_BPF + CAP_PERFMON.

Fixes: af2ac3e13e45 ("bpf: Prepare bpf syscall to be used from kernel and user space.")
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220816205517.682470-1-zhuyifei@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

skmsg: Fix wrong last sg check in sk_msg_recvmsg()

[ Upstream commit 583585e48d965338e73e1eb383768d16e0922d73 ]

Fix one kernel NULL pointer dereference as below:

[  224.462334] Call Trace:
[  224.462394]  __tcp_bpf_recvmsg+0xd3/0x380
[  224.462441]  ? sock_has_perm+0x78/0xa0
[  224.462463]  tcp_bpf_recvmsg+0x12e/0x220
[  224.462494]  inet_recvmsg+0x5b/0xd0
[  224.462534]  __sys_recvfrom+0xc8/0x130
[  224.462574]  ? syscall_trace_enter+0x1df/0x2e0
[  224.462606]  ? __do_page_fault+0x2de/0x500
[  224.462635]  __x64_sys_recvfrom+0x24/0x30
[  224.462660]  do_syscall_64+0x5d/0x1d0
[  224.462709]  entry_SYSCALL_64_after_hwframe+0x65/0xca

In commit 9974d37ea75f ("skmsg: Fix invalid last sg check in
sk_msg_recvmsg()"), we change last sg check to sg_is_last(),
but in sockmap redirection case (without stream_parser/stream_verdict/
skb_verdict), we did not mark the end of the scatterlist. Check the
sk_msg_alloc, sk_msg_page_add, and bpf_msg_push_data functions, they all
do not mark the end of sg. They are expected to use sg.end for end
judgment. So the judgment of '(i != msg_rx->sg.end)' is added back here.

Fixes: 9974d37ea75f ("skmsg: Fix invalid last sg check in sk_msg_recvmsg()")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20220809094915.150391-1-liujian56@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: mcp3911: make use of the sign bit

[ Upstream commit 8f89e33bf040bbef66386c426198622180233178 ]

The device supports negative values as well.

Fixes: 3a89b289df5d ("iio: adc: add support for mcp3911")
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220722130726.7627-2-marcus.folkesson@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: pmc_atom: Fix SLP_TYPx bitfield mask

[ Upstream commit 0a90ed8d0cfa29735a221eba14d9cb6c735d35b6 ]

On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI
specification (see Table 4.13 "PM1 Control Registers Fixed Hardware
Feature Control Bits" for the details).

Fix the mask and other related definitions accordingly.

Fixes: 93e5eadd1f6e ("x86/platform: New Intel Atom SOC power management controller driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220801113734.36131-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: Fix number of regulators for SDM660

[ Upstream commit a1653a75987749ba6dba94fa2e62f0f36b387d1a ]

1 regulator is listed but the number 2 is specified. This presumably
means we try to get a regulator with no name. Fix it.

Fixes: 462f7017a691 ("drm/msm/dsi: Fix DSI and DSI PHY regulator config from SDM660")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/496323/
Link: https://lore.kernel.org/r/20220804073608.v4.2.I94b3c3e412b7c208061349f05659e126483171b1@changeid
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: Fix number of regulators for msm8996_dsi_cfg

[ Upstream commit 1e00d6ac8a3422765bae37aeac2002dfd3c0bda6 ]

3 regulators are listed but the number 2 is specified. Fix it.

Fixes: 3a3ff88a0fc1 ("drm/msm/dsi: Add 8x96 info in dsi_cfg")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/496318/
Link: https://lore.kernel.org/r/20220804073608.v4.1.I1056ee3f77f71287f333279efe4c85f88d403f65@changeid
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: delete DP_RECOVERED_CLOCK_OUT_EN to fix tps4

[ Upstream commit 032d57960176ac01cc5adff5bcc5eb51317f8781 ]

Data Symbols scrambled is required for tps4 at link training 2.
Therefore SCRAMBLING_DISABLE bit should not be set for tps4 to
work.

RECOVERED_CLOCK_OUT_EN is for enable simple EYE test for jitter
measurement with minimal equipment for embedded applications purpose
and is not required to be set during normal operation. Current
implementation always have RECOVERED_CLOCK_OUT_EN bit set which
cause SCRAMBLING_DISABLE bit wrongly set at tps4 which prevent
tps4 from working.

This patch delete setting RECOVERED_CLOCK_OUT_EN to fix
SCRAMBLING_DISABLE be wrongly set at tps4.

Changes in v2:
-- fix Fixes tag

Changes in v3:
-- revise commit text

Changes in v4:
-- fix commit text newline

Changes in v5:
-- fix commit text line over 75 chars

Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/497194/
Link: https://lore.kernel.org/r/1660258670-4200-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: fix the inconsistent indenting

[ Upstream commit 2f25a1fb4ec516c5ad67afd754334b491b9f09a5 ]

Fix the inconsistent indenting in function msm_dsi_dphy_timing_calc_v3().

Fix the following smatch warnings:

drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:350 msm_dsi_dphy_timing_calc_v3() warn: inconsistent indenting

Fixes: f1fa7ff44056 ("drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/494662/
Link: https://lore.kernel.org/r/20220719015622.646718-1-sunliming@kylinos.cn
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.15.65

Link: https://lore.kernel.org/r/20220902121404.435662285@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: neigh: don't call kfree_skb() under spin_lock_irqsave()

commit d5485d9dd24e1d04e5509916515260186eb1455c upstream.

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So add all skb to
a tmp list, then free them after spin_unlock_irqrestore() at
once.

Fixes: 66ba215cb513 ("neigh: fix possible DoS due to net iface start/stop loop")
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/af_packet: check len when min_header_len equals to 0

commit dc633700f00f726e027846a318c5ffeb8deaaeda upstream.

User can use AF_PACKET socket to send packets with the length of 0.
When min_header_len equals to 0, packet_snd will call __dev_queue_xmit
to send packets, and sock->type can be any type.

Reported-by: syzbot+5ea725c25d06fb9114c4@syzkaller.appspotmail.com
Fixes: fd1894224407 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

android: binder: fix lockdep check on clearing vma

commit b0cab80ecd54ae3b2356bb081af0bffd538c8265 upstream.

When munmapping a vma, the mmap_lock can be degraded to a write before
calling close() on the file handle.  The binder close() function calls
binder_alloc_set_vma() to clear the vma address, which now has a lock dep
check for writing on the mmap_lock.  Change the lockdep check to ensure
the reading lock is held while clearing and keep the write check while
writing.

Link: https://lkml.kernel.org/r/20220627151857.2316964-1-Liam.Howlett@oracle.com
Fixes: 472a68df605b ("android: binder: stop saving a pointer to the VMA")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: syzbot+da54fa8d793ca89c741f@syzkaller.appspotmail.com
Acked-by: Todd Kjos <tkjos@google.com>
Cc: "Arve Hjønnevåg" <arve@android.com>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Martijn Coenen <maco@android.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix space cache corruption and potential double allocations

commit ced8ecf026fd8084cf175530ff85c76d6085d715 upstream.

When testing space_cache v2 on a large set of machines, we encountered a
few symptoms:

1. "unable to add free space :-17" (EEXIST) errors.
2. Missing free space info items, sometimes caught with a "missing free
   space info for X" error.
3. Double-accounted space: ranges that were allocated in the extent tree
   and also marked as free in the free space tree, ranges that were
   marked as allocated twice in the extent tree, or ranges that were
   marked as free twice in the free space tree. If the latter made it
   onto disk, the next reboot would hit the BUG_ON() in
   add_new_free_space().
4. On some hosts with no on-disk corruption or error messages, the
   in-memory space cache (dumped with drgn) disagreed with the free
   space tree.

All of these symptoms have the same underlying cause: a race between
caching the free space for a block group and returning free space to the
in-memory space cache for pinned extents causes us to double-add a free
range to the space cache. This race exists when free space is cached
from the free space tree (space_cache=v2) or the extent tree
(nospace_cache, or space_cache=v1 if the cache needs to be regenerated).
struct btrfs_block_group::last_byte_to_unpin and struct
btrfs_block_group::progress are supposed to protect against this race,
but commit d0c2f4fa555e ("btrfs: make concurrent fsyncs wait less when
waiting for a transaction commit") subtly broke this by allowing
multiple transactions to be unpinning extents at the same time.

Specifically, the race is as follows:

1. An extent is deleted from an uncached block group in transaction A.
2. btrfs_commit_transaction() is called for transaction A.
3. btrfs_run_delayed_refs() -> __btrfs_free_extent() runs the delayed
   ref for the deleted extent.
4. __btrfs_free_extent() -> do_free_extent_accounting() ->
   add_to_free_space_tree() adds the deleted extent back to the free
   space tree.
5. do_free_extent_accounting() -> btrfs_update_block_group() ->
   btrfs_cache_block_group() queues up the block group to get cached.
   block_group->progress is set to block_group->start.
6. btrfs_commit_transaction() for transaction A calls
   switch_commit_roots(). It sets block_group->last_byte_to_unpin to
   block_group->progress, which is block_group->start because the block
   group hasn't been cached yet.
7. The caching thread gets to our block group. Since the commit roots
   were already switched, load_free_space_tree() sees the deleted extent
   as free and adds it to the space cache. It finishes caching and sets
   block_group->progress to U64_MAX.
8. btrfs_commit_transaction() advances transaction A to
   TRANS_STATE_SUPER_COMMITTED.
9. fsync calls btrfs_commit_transaction() for transaction B. Since
   transaction A is already in TRANS_STATE_SUPER_COMMITTED and the
   commit is for fsync, it advances.
10. btrfs_commit_transaction() for transaction B calls
    switch_commit_roots(). This time, the block group has already been
    cached, so it sets block_group->last_byte_to_unpin to U64_MAX.
11. btrfs_commit_transaction() for transaction A calls
    btrfs_finish_extent_commit(), which calls unpin_extent_range() for
    the deleted extent. It sees last_byte_to_unpin set to U64_MAX (by
    transaction B!), so it adds the deleted extent to the space cache
    again!

This explains all of our symptoms above:

* If the sequence of events is exactly as described above, when the free
  space is re-added in step 11, it will fail with EEXIST.
* If another thread reallocates the deleted extent in between steps 7
  and 11, then step 11 will silently re-add that space to the space
  cache as free even though it is actually allocated. Then, if that
  space is allocated *again*, the free space tree will be corrupted
  (namely, the wrong item will be deleted).
* If we don't catch this free space tree corruption, it will continue
  to get worse as extents are deleted and reallocated.

The v1 space_cache is synchronously loaded when an extent is deleted
(btrfs_update_block_group() with alloc=0 calls btrfs_cache_block_group()
with load_cache_only=1), so it is not normally affected by this bug.
However, as noted above, if we fail to load the space cache, we will
fall back to caching from the extent tree and may hit this bug.

The easiest fix for this race is to also make caching from the free
space tree or extent tree synchronous. Josef tested this and found no
performance regressions.

A few extra changes fall out of this change. Namely, this fix does the
following, with step 2 being the crucial fix:

1. Factor btrfs_caching_ctl_wait_done() out of
   btrfs_wait_block_group_cache_done() to allow waiting on a caching_ctl
   that we already hold a reference to.
2. Change the call in btrfs_cache_block_group() of
   btrfs_wait_space_cache_v1_finished() to
   btrfs_caching_ctl_wait_done(), which makes us wait regardless of the
   space_cache option.
3. Delete the now unused btrfs_wait_space_cache_v1_finished() and
   space_cache_v1_done().
4. Change btrfs_cache_block_group()'s `int load_cache_only` parameter to
   `bool wait` to more accurately describe its new meaning.
5. Change a few callers which had a separate call to
   btrfs_wait_block_group_cache_done() to use wait = true instead.
6. Make btrfs_wait_block_group_cache_done() static now that it's not
   used outside of block-group.c anymore.

Fixes: d0c2f4fa555e ("btrfs: make concurrent fsyncs wait less when waiting for a transaction commit")
CC: stable@vger.kernel.org # 5.12+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes: don't call disarm_kprobe() for disabled kprobes

commit 9c80e79906b4ca440d09e7f116609262bb747909 upstream.

The assumption in __disable_kprobe() is wrong, and it could try to disarm
an already disarmed kprobe and fire the WARN_ONCE() below. [0]  We can
easily reproduce this issue.

1. Write 0 to /sys/kernel/debug/kprobes/enabled.

  # echo 0 > /sys/kernel/debug/kprobes/enabled

2. Run execsnoop.  At this time, one kprobe is disabled.

  # /usr/share/bcc/tools/execsnoop &
  [1] 2460
  PCOMM            PID    PPID   RET ARGS

  # cat /sys/kernel/debug/kprobes/list
  ffffffff91345650  r  __x64_sys_execve+0x0    [FTRACE]
  ffffffff91345650  k  __x64_sys_execve+0x0    [DISABLED][FTRACE]

3. Write 1 to /sys/kernel/debug/kprobes/enabled, which changes
   kprobes_all_disarmed to false but does not arm the disabled kprobe.

  # echo 1 > /sys/kernel/debug/kprobes/enabled

  # cat /sys/kernel/debug/kprobes/list
  ffffffff91345650  r  __x64_sys_execve+0x0    [FTRACE]
  ffffffff91345650  k  __x64_sys_execve+0x0    [DISABLED][FTRACE]

4. Kill execsnoop, when __disable_kprobe() calls disarm_kprobe() for the
   disabled kprobe and hits the WARN_ONCE() in __disarm_kprobe_ftrace().

  # fg
  /usr/share/bcc/tools/execsnoop
  ^C

Actually, WARN_ONCE() is fired twice, and __unregister_kprobe_top() misses
some cleanups and leaves the aggregated kprobe in the hash table.  Then,
__unregister_trace_kprobe() initialises tk->rp.kp.list and creates an
infinite loop like this.

  aggregated kprobe.list -> kprobe.list -.
                                     ^    |
                                     '.__.'

In this situation, these commands fall into the infinite loop and result
in RCU stall or soft lockup.

  cat /sys/kernel/debug/kprobes/list : show_kprobe_addr() enters into the
                                       infinite loop with RCU.

  /usr/share/bcc/tools/execsnoop : warn_kprobe_rereg() holds kprobe_mutex,
                                   and __get_valid_kprobe() is stuck in
   the loop.

To avoid the issue, make sure we don't call disarm_kprobe() for disabled
kprobes.

[0]
Failed to disarm kprobe-ftrace at __x64_sys_execve+0x0/0x40 (error -2)
WARNING: CPU: 6 PID: 2460 at kernel/kprobes.c:1130 __disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129)
Modules linked in: ena
CPU: 6 PID: 2460 Comm: execsnoop Not tainted 5.19.0+ #28
Hardware name: Amazon EC2 c5.2xlarge/, BIOS 1.0 10/16/2017
RIP: 0010:__disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129)
Code: 24 8b 02 eb c1 80 3d c4 83 f2 01 00 75 d4 48 8b 75 00 89 c2 48 c7 c7 90 fa 0f 92 89 04 24 c6 05 ab 83 01 e8 e4 94 f0 ff <0f> 0b 8b 04 24 eb b1 89 c6 48 c7 c7 60 fa 0f 92 89 04 24 e8 cc 94
RSP: 0018:ffff9e6ec154bd98 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff930f7b00 RCX: 0000000000000001
RDX: 0000000080000001 RSI: ffffffff921461c5 RDI: 00000000ffffffff
RBP: ffff89c504286da8 R08: 0000000000000000 R09: c0000000fffeffff
R10: 0000000000000000 R11: ffff9e6ec154bc28 R12: ffff89c502394e40
R13: ffff89c502394c00 R14: ffff9e6ec154bc00 R15: 0000000000000000
FS:  00007fe800398740(0000) GS:ffff89c812d80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000c00057f010 CR3: 0000000103b54006 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
 __disable_kprobe (kernel/kprobes.c:1716)
 disable_kprobe (kernel/kprobes.c:2392)
 __disable_trace_kprobe (kernel/trace/trace_kprobe.c:340)
 disable_trace_kprobe (kernel/trace/trace_kprobe.c:429)
 perf_trace_event_unreg.isra.2 (./include/linux/tracepoint.h:93 kernel/trace/trace_event_perf.c:168)
 perf_kprobe_destroy (kernel/trace/trace_event_perf.c:295)
 _free_event (kernel/events/core.c:4971)
 perf_event_release_kernel (kernel/events/core.c:5176)
 perf_release (kernel/events/core.c:5186)
 __fput (fs/file_table.c:321)
 task_work_run (./include/linux/sched.h:2056 (discriminator 1) kernel/task_work.c:179 (discriminator 1))
 exit_to_user_mode_prepare (./include/linux/resume_user_mode.h:49 kernel/entry/common.c:169 kernel/entry/common.c:201)
 syscall_exit_to_user_mode (./arch/x86/include/asm/jump_label.h:55 ./arch/x86/include/asm/nospec-branch.h:384 ./arch/x86/include/asm/entry-common.h:94 kernel/entry/common.c:133 kernel/entry/common.c:296)
 do_syscall_64 (arch/x86/entry/common.c:87)
 entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
RIP: 0033:0x7fe7ff210654
Code: 15 79 89 20 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb be 0f 1f 00 8b 05 9a cd 20 00 48 63 ff 85 c0 75 11 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3a f3 c3 48 83 ec 18 48 89 7c 24 08 e8 34 fc
RSP: 002b:00007ffdbd1d3538 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000008 RCX: 00007fe7ff210654
RDX: 0000000000000000 RSI: 0000000000002401 RDI: 0000000000000008
RBP: 0000000000000000 R08: 94ae31d6fda838a4 R0900007fe8001c9d30
R10: 00007ffdbd1d34b0 R11: 0000000000000246 R12: 00007ffdbd1d3600
R13: 0000000000000000 R14: fffffffffffffffc R15: 00007ffdbd1d3560
</TASK>

Link: https://lkml.kernel.org/r/20220813020509.90805-1-kuniyu@amazon.com
Fixes: 69d54b916d83 ("kprobes: makes kprobes/enabled works correctly for optimized kprobes.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reported-by: Ayushman Dutta <ayudutta@amazon.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Kuniyuki Iwashima <kuni1840@gmail.com>
Cc: Ayushman Dutta <ayudutta@amazon.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: tree-checker: check for overlapping extent items

[ Upstream commit 899b7f69f244e539ea5df1b4d756046337de44a5 ]

We're seeing a weird problem in production where we have overlapping
extent items in the extent tree.  It's unclear where these are coming
from, and in debugging we realized there's no check in the tree checker
for this sort of problem.  Add a check to the tree-checker to make sure
that the extents do not overlap each other.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix lockdep splat with reloc root extent buffers

[ Upstream commit b40130b23ca4a08c5785d5a3559805916bddba3c ]

We have been hitting the following lockdep splat with btrfs/187 recently

  WARNING: possible circular locking dependency detected
  5.19.0-rc8+ #775 Not tainted
  ------------------------------------------------------
  btrfs/752500 is trying to acquire lock:
  ffff97e1875a97b8 (btrfs-treloc-02#2){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110

  but task is already holding lock:
  ffff97e1875a9278 (btrfs-tree-01/1){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #2 (btrfs-tree-01/1){+.+.}-{3:3}:
 down_write_nested+0x41/0x80
 __btrfs_tree_lock+0x24/0x110
 btrfs_init_new_buffer+0x7d/0x2c0
 btrfs_alloc_tree_block+0x120/0x3b0
 __btrfs_cow_block+0x136/0x600
 btrfs_cow_block+0x10b/0x230
 btrfs_search_slot+0x53b/0xb70
 btrfs_lookup_inode+0x2a/0xa0
 __btrfs_update_delayed_inode+0x5f/0x280
 btrfs_async_run_delayed_root+0x24c/0x290
 btrfs_work_helper+0xf2/0x3e0
 process_one_work+0x271/0x590
 worker_thread+0x52/0x3b0
 kthread+0xf0/0x120
 ret_from_fork+0x1f/0x30

  -> #1 (btrfs-tree-01){++++}-{3:3}:
 down_write_nested+0x41/0x80
 __btrfs_tree_lock+0x24/0x110
 btrfs_search_slot+0x3c3/0xb70
 do_relocation+0x10c/0x6b0
 relocate_tree_blocks+0x317/0x6d0
 relocate_block_group+0x1f1/0x560
 btrfs_relocate_block_group+0x23e/0x400
 btrfs_relocate_chunk+0x4c/0x140
 btrfs_balance+0x755/0xe40
 btrfs_ioctl+0x1ea2/0x2c90
 __x64_sys_ioctl+0x88/0xc0
 do_syscall_64+0x38/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

  -> #0 (btrfs-treloc-02#2){+.+.}-{3:3}:
 __lock_acquire+0x1122/0x1e10
 lock_acquire+0xc2/0x2d0
 down_write_nested+0x41/0x80
 __btrfs_tree_lock+0x24/0x110
 btrfs_lock_root_node+0x31/0x50
 btrfs_search_slot+0x1cb/0xb70
 replace_path+0x541/0x9f0
 merge_reloc_root+0x1d6/0x610
 merge_reloc_roots+0xe2/0x260
 relocate_block_group+0x2c8/0x560
 btrfs_relocate_block_group+0x23e/0x400
 btrfs_relocate_chunk+0x4c/0x140
 btrfs_balance+0x755/0xe40
 btrfs_ioctl+0x1ea2/0x2c90
 __x64_sys_ioctl+0x88/0xc0
 do_syscall_64+0x38/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

  other info that might help us debug this:

  Chain exists of:
    btrfs-treloc-02#2 --> btrfs-tree-01 --> btrfs-tree-01/1

   Possible unsafe locking scenario:

 CPU0                    CPU1
 ----                    ----
    lock(btrfs-tree-01/1);
 lock(btrfs-tree-01);
 lock(btrfs-tree-01/1);
    lock(btrfs-treloc-02#2);

   *** DEADLOCK ***

  7 locks held by btrfs/752500:
   #0: ffff97e292fdf460 (sb_writers#12){.+.+}-{0:0}, at: btrfs_ioctl+0x208/0x2c90
   #1: ffff97e284c02050 (&fs_info->reclaim_bgs_lock){+.+.}-{3:3}, at: btrfs_balance+0x55f/0xe40
   #2: ffff97e284c00878 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_relocate_block_group+0x236/0x400
   #3: ffff97e292fdf650 (sb_internal#2){.+.+}-{0:0}, at: merge_reloc_root+0xef/0x610
   #4: ffff97e284c02378 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x1a8/0x5a0
   #5: ffff97e284c023a0 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x1a8/0x5a0
   #6: ffff97e1875a9278 (btrfs-tree-01/1){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110

  stack backtrace:
  CPU: 1 PID: 752500 Comm: btrfs Not tainted 5.19.0-rc8+ #775
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  Call Trace:

   dump_stack_lvl+0x56/0x73
   check_noncircular+0xd6/0x100
   ? lock_is_held_type+0xe2/0x140
   __lock_acquire+0x1122/0x1e10
   lock_acquire+0xc2/0x2d0
   ? __btrfs_tree_lock+0x24/0x110
   down_write_nested+0x41/0x80
   ? __btrfs_tree_lock+0x24/0x110
   __btrfs_tree_lock+0x24/0x110
   btrfs_lock_root_node+0x31/0x50
   btrfs_search_slot+0x1cb/0xb70
   ? lock_release+0x137/0x2d0
   ? _raw_spin_unlock+0x29/0x50
   ? release_extent_buffer+0x128/0x180
   replace_path+0x541/0x9f0
   merge_reloc_root+0x1d6/0x610
   merge_reloc_roots+0xe2/0x260
   relocate_block_group+0x2c8/0x560
   btrfs_relocate_block_group+0x23e/0x400
   btrfs_relocate_chunk+0x4c/0x140
   btrfs_balance+0x755/0xe40
   btrfs_ioctl+0x1ea2/0x2c90
   ? lock_is_held_type+0xe2/0x140
   ? lock_is_held_type+0xe2/0x140
   ? __x64_sys_ioctl+0x88/0xc0
   __x64_sys_ioctl+0x88/0xc0
   do_syscall_64+0x38/0x90
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

This isn't necessarily new, it's just tricky to hit in practice.  There
are two competing things going on here.  With relocation we create a
snapshot of every fs tree with a reloc tree.  Any extent buffers that
get initialized here are initialized with the reloc root lockdep key.
However since it is a snapshot, any blocks that are currently in cache
that originally belonged to the fs tree will have the normal tree
lockdep key set.  This creates the lock dependency of

  reloc tree -> normal tree

for the extent buffer locking during the first phase of the relocation
as we walk down the reloc root to relocate blocks.

However this is problematic because the final phase of the relocation is
merging the reloc root into the original fs root.  This involves
searching down to any keys that exist in the original fs root and then
swapping the relocated block and the original fs root block.  We have to
search down to the fs root first, and then go search the reloc root for
the block we need to replace.  This creates the dependency of

  normal tree -> reloc tree

which is why lockdep complains.

Additionally even if we were to fix this particular mismatch with a
different nesting for the merge case, we're still slotting in a block
that has a owner of the reloc root objectid into a normal tree, so that
block will have its lockdep key set to the tree reloc root, and create a
lockdep splat later on when we wander into that block from the fs root.

Unfortunately the only solution here is to make sure we do not set the
lockdep key to the reloc tree lockdep key normally, and then reset any
blocks we wander into from the reloc root when we're doing the merged.

This solves the problem of having mixed tree reloc keys intermixed with
normal tree keys, and then allows us to make sure in the merge case we
maintain the lock order of

  normal tree -> reloc tree

We handle this by setting a bit on the reloc root when we do the search
for the block we want to relocate, and any block we search into or COW
at that point gets set to the reloc tree key.  This works correctly
because we only ever COW down to the parent node, so we aren't resetting
the key for the block we're linking into the fs root.

With this patch we no longer have the lockdep splat in btrfs/187.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: move lockdep class helpers to locking.c

[ Upstream commit 0a27a0474d146eb79e09ec88bf0d4229f4cfc1b8 ]

These definitions exist in disk-io.c, which is not related to the
locking.  Move this over to locking.h/c where it makes more sense.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

testing: selftests: nft_flowtable.sh: use random netns names

[ Upstream commit b71b7bfeac38c7a21c423ddafb29aa6258949df8 ]

"ns1" is a too generic name, use a random suffix to avoid
errors when such a netns exists.  Also allows to run multiple
instances of the script in parallel.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: NF_CONNTRACK_PROCFS should no longer default to y

[ Upstream commit aa5762c34213aba7a72dc58e70601370805fa794 ]

NF_CONNTRACK_PROCFS was marked obsolete in commit 54b07dca68557b09
("netfilter: provide config option to disable ancient procfs parts") in
v3.3.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: avoid doing vm_init multiple time

[ Upstream commit 5544a7b5a07480192eb5fd3536462faed2c21528 ]

[why]
this is to ensure that driver will not reprogram hvm_prefetch_req again if
it is done.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Increase tlb flush timeout for sriov

[ Upstream commit 373008bfc9cdb0f050258947fa5a095f0657e1bc ]

[Why]
During multi-vf executing benchmark (Luxmark) observed kiq error timeout.
It happenes because all of VFs do the tlb invalidation at the same time.
Although each VF has the invalidate register set, from hardware side
the invalidate requests are queue to execute.

[How]
In case of 12 VF increase timeout on 12*100ms

Signed-off-by: Dusica Milinkovic <Dusica.Milinkovic@amd.com>
Acked-by: Shaoyun Liu <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix pixel clock programming

[ Upstream commit 04fb918bf421b299feaee1006e82921d7d381f18 ]

[Why]
Some pixel clock values could cause HDMI TMDS SSCPs to be misaligned
between different HDMI lanes when using YCbCr420 10-bit pixel format.

BIOS functions for transmitter/encoder control take pixel clock in kHz
increments, whereas the function for setting the pixel clock is in 100Hz
increments. Setting pixel clock to a value that is not on a kHz boundary
will cause the issue.

[How]
Round pixel clock down to nearest kHz in 10/12-bpc cases.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: add missing ->fini_microcode interface for Sienna Cichlid

[ Upstream commit 0a2d922a5618377cdf8fa476351362733ef55342 ]

To avoid any potential memory leak.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: don't remove dos attribute xattr on O_TRUNC open

[ Upstream commit 17661ecf6a64eb11ae7f1108fe88686388b2acd5 ]

When smb client open file in ksmbd share with O_TRUNC, dos attribute
xattr is removed as well as data in file. This cause the FSCTL_SET_SPARSE
request from the client fails because ksmbd can't update the dos attribute
after setting ATTR_SPARSE_FILE. And this patch fix xfstests generic/469
test also.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/hypfs: avoid error message under KVM

[ Upstream commit 7b6670b03641ac308aaa6fa2e6f964ac993b5ea3 ]

When booting under KVM the following error messages are issued:

hypfs.7f5705: The hardware system does not support hypfs
hypfs.7a79f0: Initialization of hypfs failed with rc=-61

Demote the severity of first message from "error" to "info" and issue
the second message only in other error cases.

Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20220620094534.18967-1-jgross@suse.com
[arch/s390/hypfs/hypfs_diag.c changed description]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

neigh: fix possible DoS due to net iface start/stop loop

[ Upstream commit 66ba215cb51323e4e55e38fd5f250e0fae0cbc94 ]

Normal processing of ARP request (usually this is Ethernet broadcast
packet) coming to the host is looking like the following:
* the packet comes to arp_process() call and is passed through routing
  procedure
* the request is put into the queue using pneigh_enqueue() if
  corresponding ARP record is not local (common case for container
  records on the host)
* the request is processed by timer (within 80 jiffies by default) and
  ARP reply is sent from the same arp_process() using
  NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED condition (flag is set inside
  pneigh_enqueue())

And here the problem comes. Linux kernel calls pneigh_queue_purge()
which destroys the whole queue of ARP requests on ANY network interface
start/stop event through __neigh_ifdown().

This is actually not a problem within the original world as network
interface start/stop was accessible to the host 'root' only, which
could do more destructive things. But the world is changed and there
are Linux containers available. Here container 'root' has an access
to this API and could be considered as untrusted user in the hosting
(container's) world.

Thus there is an attack vector to other containers on node when
container's root will endlessly start/stop interfaces. We have observed
similar situation on a real production node when docker container was
doing such activity and thus other containers on the node become not
accessible.

The patch proposed doing very simple thing. It drops only packets from
the same namespace in the pneigh_queue_purge() where network interface
state change is detected. This is enough to prevent the problem for the
whole node preserving original semantics of the code.

v2:
- do del_timer_sync() if queue is empty after pneigh_queue_purge()
v3:
- rebase to net tree

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@kernel.org>
Cc: Yajun Deng <yajun.deng@linux.dev>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Cc: Konstantin Khorenko <khorenko@virtuozzo.com>
Cc: kernel@openvz.org
Cc: devel@openvz.org
Investigated-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: return STATUS_BAD_NETWORK_NAME error status if share is not configured

[ Upstream commit fe54833dc8d97ef387e86f7c80537d51c503ca75 ]

If share is not configured in smb.conf, smb2 tree connect should return
STATUS_BAD_NETWORK_NAME instead of STATUS_BAD_NETWORK_PATH.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: clear optc underflow before turn off odm clock

[ Upstream commit b2a93490201300a749ad261b5c5d05cb50179c44 ]

[Why]
After ODM clock off, optc underflow bit will be kept there always and clear not work.
We need to clear that before clock off.

[How]
Clear that if have when clock off.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fudong Wang <Fudong.Wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>