Schspa Shi [Wed, 20 Apr 2022 19:15:41 +0000 (03:15 +0800)]
cpufreq: Fix possible race in cpufreq online error path
[ Upstream commit
f346e96267cd76175d6c201b40f770c0116a8a04 ]
When cpufreq online fails, the policy->cpus mask is not cleared and
policy->rwsem is released too early, so the driver can be invoked
via the cpuinfo_cur_freq sysfs attribute while its ->offline() or
->exit() callbacks are being run.
Take policy->clk as an example:
static int cpufreq_online(unsigned int cpu)
{
...
// policy->cpus != 0 at this time
down_write(&policy->rwsem);
ret = cpufreq_add_dev_interface(policy);
up_write(&policy->rwsem);
return 0;
out_destroy_policy:
for_each_cpu(j, policy->real_cpus)
remove_cpu_dev_symlink(policy, get_cpu_device(j));
up_write(&policy->rwsem);
...
out_exit_policy:
if (cpufreq_driver->exit)
cpufreq_driver->exit(policy);
clk_put(policy->clk);
// policy->clk is a wild pointer
...
^
|
Another process access
__cpufreq_get
cpufreq_verify_current_freq
cpufreq_generic_get
// acces wild pointer of policy->clk;
|
|
out_offline_policy: |
cpufreq_policy_free(policy); |
// deleted here, and will wait for no body reference
cpufreq_policy_put_kobj(policy);
}
Address this by modifying cpufreq_online() to release policy->rwsem
in the error path after the driver callbacks have run and to clear
policy->cpus before releasing the semaphore.
Fixes:
7106e02baed4 ("cpufreq: release policy->rwsem on error")
Signed-off-by: Schspa Shi <schspa@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheng Yongjun [Fri, 22 Apr 2022 06:26:41 +0000 (06:26 +0000)]
spi: img-spfi: Fix pm_runtime_get_sync() error checking
[ Upstream commit
cc470d55343056d6b2a5c32e10e0aad06f324078 ]
If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1, so a test for negative
value should be used to check for errors.
Fixes:
deba25800a12b ("spi: Add driver for IMG SPFI controller")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20220422062641.10486-1-zhengyongjun3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chengming Zhou [Fri, 8 Apr 2022 12:19:14 +0000 (20:19 +0800)]
sched/psi: report zeroes for CPU full at the system level
[ Upstream commit
890d550d7dbac7a31ecaa78732aa22be282bb6b8 ]
Martin find it confusing when look at the /proc/pressure/cpu output,
and found no hint about that CPU "full" line in psi Documentation.
% cat /proc/pressure/cpu
some avg10=0.92 avg60=0.91 avg300=0.73 total=
933490489
full avg10=0.22 avg60=0.23 avg300=0.16 total=
358783277
The PSI_CPU_FULL state is introduced by commit
e7fcd7622823
("psi: Add PSI_CPU_FULL state"), which mainly for cgroup level,
but also counted at the system level as a side effect.
Naturally, the FULL state doesn't exist for the CPU resource at
the system level. These "full" numbers can come from CPU idle
schedule latency. For example, t1 is the time when task wakeup
on an idle CPU, t2 is the time when CPU pick and switch to it.
The delta of (t2 - t1) will be in CPU_FULL state.
Another case all processes can be stalled is when all cgroups
have been throttled at the same time, which unlikely to happen.
Anyway, CPU_FULL metric is meaningless and confusing at the
system level. So this patch will report zeroes for CPU full
at the system level, and update psi Documentation accordingly.
Fixes:
e7fcd7622823 ("psi: Add PSI_CPU_FULL state")
Reported-by: Martin Steigerwald <Martin.Steigerwald@proact.de>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220408121914.82855-1-zhouchengming@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chengming Zhou [Fri, 8 Apr 2022 11:53:08 +0000 (19:53 +0800)]
sched/fair: Fix cfs_rq_clock_pelt() for throttled cfs_rq
[ Upstream commit
64eaf50731ac0a8c76ce2fedd50ef6652aabc5ff ]
Since commit
23127296889f ("sched/fair: Update scale invariance of PELT")
change to use rq_clock_pelt() instead of rq_clock_task(), we should also
use rq_clock_pelt() for throttled_clock_task_time and throttled_clock_task
accounting to get correct cfs_rq_clock_pelt() of throttled cfs_rq. And
rename throttled_clock_task(_time) to be clock_pelt rather than clock_task.
Fixes:
23127296889f ("sched/fair: Update scale invariance of PELT")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220408115309.81603-1-zhouchengming@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marco Elver [Mon, 4 Apr 2022 11:12:04 +0000 (13:12 +0200)]
signal: Deliver SIGTRAP on perf event asynchronously if blocked
[ Upstream commit
78ed93d72ded679e3caf0758357209887bda885f ]
With SIGTRAP on perf events, we have encountered termination of
processes due to user space attempting to block delivery of SIGTRAP.
Consider this case:
<set up SIGTRAP on a perf event>
...
sigset_t s;
sigemptyset(&s);
sigaddset(&s, SIGTRAP | <and others>);
sigprocmask(SIG_BLOCK, &s, ...);
...
<perf event triggers>
When the perf event triggers, while SIGTRAP is blocked, force_sig_perf()
will force the signal, but revert back to the default handler, thus
terminating the task.
This makes sense for error conditions, but not so much for explicitly
requested monitoring. However, the expectation is still that signals
generated by perf events are synchronous, which will no longer be the
case if the signal is blocked and delivered later.
To give user space the ability to clearly distinguish synchronous from
asynchronous signals, introduce siginfo_t::si_perf_flags and
TRAP_PERF_FLAG_ASYNC (opted for flags in case more binary information is
required in future).
The resolution to the problem is then to (a) no longer force the signal
(avoiding the terminations), but (b) tell user space via si_perf_flags
if the signal was synchronous or not, so that such signals can be
handled differently (e.g. let user space decide to ignore or consider
the data imprecise).
The alternative of making the kernel ignore SIGTRAP on perf events if
the signal is blocked may work for some usecases, but likely causes
issues in others that then have to revert back to interception of
sigprocmask() (which we want to avoid). [ A concrete example: when using
breakpoint perf events to track data-flow, in a region of code where
signals are blocked, data-flow can no longer be tracked accurately.
When a relevant asynchronous signal is received after unblocking the
signal, the data-flow tracking logic needs to know its state is
imprecise. ]
Fixes:
97ba62b27867 ("perf: Add support for SIGTRAP on perf events")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20220404111204.935357-1-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nícolas F. R. A. Prado [Fri, 8 Apr 2022 01:39:50 +0000 (21:39 -0400)]
drm/mediatek: dpi: Use mt8183 output formats for mt8192
[ Upstream commit
7112e0b0a58be8575547eba6596c42710922674f ]
The configuration for mt8192 was incorrectly using the output formats
from mt8173. Since the output formats for mt8192 are instead the same
ones as for mt8183, which require two bus samples per pixel, the
pixelclock and DDR edge setting were misconfigured. This made external
displays unable to show the image.
Fix the issue by correcting the output format for mt8192 to be the same
as for mt8183, fixing the usage of external displays for mt8192.
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220408013950.674477-1-nfraprado@collabora.com/
Fixes:
be63f6e8601f ("drm/mediatek: dpi: Add output bus formats to driver data")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Yongjun [Thu, 21 Apr 2022 09:03:35 +0000 (09:03 +0000)]
regulator: da9121: Fix uninit-value in da9121_assign_chip_model()
[ Upstream commit
bab76514aca36bc513224525d5598da676938218 ]
KASAN report slab-out-of-bounds in __regmap_init as follows:
BUG: KASAN: slab-out-of-bounds in __regmap_init drivers/base/regmap/regmap.c:841
Read of size 1 at addr
ffff88803678cdf1 by task xrun/9137
CPU: 0 PID: 9137 Comm: xrun Tainted: G W 5.18.0-rc2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x15a lib/dump_stack.c:88
print_report.cold+0xcd/0x69b mm/kasan/report.c:313
kasan_report+0x8e/0xc0 mm/kasan/report.c:491
__regmap_init+0x4540/0x4ba0 drivers/base/regmap/regmap.c:841
__devm_regmap_init+0x7a/0x100 drivers/base/regmap/regmap.c:1266
__devm_regmap_init_i2c+0x65/0x80 drivers/base/regmap/regmap-i2c.c:394
da9121_i2c_probe+0x386/0x6d1 drivers/regulator/da9121-regulator.c:1039
i2c_device_probe+0x959/0xac0 drivers/i2c/i2c-core-base.c:563
This happend when da9121 device is probe by da9121_i2c_id, but with
invalid dts. Thus, chip->subvariant_id is set to -EINVAL, and later
da9121_assign_chip_model() will access 'regmap' without init it.
Fix it by return -EINVAL from da9121_assign_chip_model() if
'chip->subvariant_id' is invalid.
Fixes:
f3fbd5566f6a ("regulator: da9121: Add device variants")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Adam Ward <Adam.Ward.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20220421090335.1876149-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Wed, 20 Apr 2022 01:16:40 +0000 (01:16 +0000)]
drm/bridge: Fix error handling in analogix_dp_probe
[ Upstream commit
9f15930bb2ef9f031d62ffc49629cbae89137733 ]
In the error handling path, the clk_prepare_enable() function
call should be balanced by a corresponding 'clk_disable_unprepare()'
call, as already done in the remove function.
Fixes:
3424e3a4f844 ("drm: bridge: analogix/dp: split exynos dp driver to bridge directory")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220420011644.25730-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Sat, 16 Apr 2022 07:37:21 +0000 (07:37 +0000)]
HID: elan: Fix potential double free in elan_input_configured
[ Upstream commit
1af20714fedad238362571620be0bd690ded05b6 ]
'input' is a managed resource allocated with devm_input_allocate_device(),
so there is no need to call input_free_device() explicitly or
there will be a double free.
According to the doc of devm_input_allocate_device():
* Managed input devices do not need to be explicitly unregistered or
* freed as it will be done automatically when owner device unbinds from
* its driver (or binding fails).
Fixes:
b7429ea53d6c ("HID: elan: Fix memleak in elan_input_configured")
Fixes:
9a6a4193d65b ("HID: Add driver for USB ELAN Touchpad")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Teh [Sun, 13 Mar 2022 19:48:18 +0000 (19:48 +0000)]
HID: hid-led: fix maximum brightness for Dream Cheeky
[ Upstream commit
116c3f4a78ebe478d5ad5a038baf931e93e7d748 ]
Increase maximum brightness for Dream Cheeky to 63. Emperically
determined based on testing in kernel 4.4 on this device:
Bus 003 Device 002: ID 1d34:0004 Dream Cheeky Webmail Notifier
Fixes:
6c7ad07e9e05 ("HID: migrate USB LED driver from usb misc to hid")
Signed-off-by: Jonathan Teh <jonathan.teh@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheyu Ma [Mon, 11 Apr 2022 12:58:08 +0000 (20:58 +0800)]
mtd: rawnand: denali: Use managed device resources
[ Upstream commit
3a745b51cddafade99aaea1b93aad31e9614e230 ]
All of the resources used by this driver has managed interfaces, so use
them. Otherwise we will get the following splat:
[ 4.472703] denali-nand-pci 0000:00:05.0: timeout while waiting for irq 0x1000
[ 4.474071] denali-nand-pci: probe of 0000:00:05.0 failed with error -5
[ 4.473538] nand: No NAND device found
[ 4.474068] BUG: unable to handle page fault for address:
ffffc90005000410
[ 4.475169] #PF: supervisor write access in kernel mode
[ 4.475579] #PF: error_code(0x0002) - not-present page
[ 4.478362] RIP: 0010:iowrite32+0x9/0x50
[ 4.486068] Call Trace:
[ 4.486269] <IRQ>
[ 4.486443] denali_isr+0x15b/0x300 [denali]
[ 4.486788] ? denali_direct_write+0x50/0x50 [denali]
[ 4.487189] __handle_irq_event_percpu+0x161/0x3b0
[ 4.487571] handle_irq_event+0x7d/0x1b0
[ 4.487884] handle_fasteoi_irq+0x2b0/0x770
[ 4.488219] __common_interrupt+0xc8/0x1b0
[ 4.488549] common_interrupt+0x9a/0xc0
Fixes:
93db446a424c ("mtd: nand: move raw NAND related code to the raw/ subdir")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220411125808.958276-1-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tyler Hicks [Tue, 11 Jan 2022 16:38:00 +0000 (10:38 -0600)]
EDAC/dmc520: Don't print an error for each unconfigured interrupt line
[ Upstream commit
ad2df24732e8956a45a00894d2163c4ee8fb0e1f ]
The dmc520 driver requires that at least one interrupt line, out of the
ten possible, is configured. The driver prints an error and returns
-EINVAL from its .probe function if there are no interrupt lines
configured.
Don't print a KERN_ERR level message for each interrupt line that's
unconfigured as that can confuse users into thinking that there is an
error condition.
Before this change, the following KERN_ERR level messages would be
reported if only dram_ecc_errc and dram_ecc_errd were configured in the
device tree:
dmc520
68000000.dmc: IRQ ram_ecc_errc not found
dmc520
68000000.dmc: IRQ ram_ecc_errd not found
dmc520
68000000.dmc: IRQ failed_access not found
dmc520
68000000.dmc: IRQ failed_prog not found
dmc520
68000000.dmc: IRQ link_err not
dmc520
68000000.dmc: IRQ temperature_event not found
dmc520
68000000.dmc: IRQ arch_fsm not found
dmc520
68000000.dmc: IRQ phy_request not found
Fixes:
1088750d7839 ("EDAC: Add EDAC driver for DMC520")
Reported-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220111163800.22362-1-tyhicks@linux.microsoft.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Wed, 6 Apr 2022 19:07:09 +0000 (21:07 +0200)]
drbd: fix duplicate array initializer
[ Upstream commit
33cb0917bbe241dd17a2b87ead63514c1b7e5615 ]
There are two initializers for P_RETRY_WRITE:
drivers/block/drbd/drbd_main.c:3676:22: warning: initialized field overwritten [-Woverride-init]
Remove the first one since it was already ignored by the compiler
and reorder the list to match the enum definition. As P_ZEROES had
no entry, add that one instead.
Fixes:
036b17eaab93 ("drbd: Receiving part for the PROTOCOL_UPDATE packet")
Fixes:
f31e583aa2c2 ("drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire")")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Fri, 15 Apr 2022 04:52:32 +0000 (06:52 +0200)]
target: remove an incorrect unmap zeroes data deduction
[ Upstream commit
179d8609d8424529e95021df939ed7b0b82b37f1 ]
For block devices, the SCSI target drivers implements UNMAP as calls to
blkdev_issue_discard, which does not guarantee zeroing just because
Write Zeroes is supported.
Note that this does not affect the file backed path which uses
fallocate to punch holes.
Fixes:
2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Fri, 8 Apr 2022 18:48:40 +0000 (21:48 +0300)]
device property: Allow error pointer to be passed to fwnode APIs
[ Upstream commit
002752af7b89b74c64fe6bec8c5fde3d3a7810d8 ]
Some of the fwnode APIs might return an error pointer instead of NULL
or valid fwnode handle. The result of such API call may be considered
optional and hence the test for it is usually done in a form of
fwnode = fwnode_find_reference(...);
if (IS_ERR(fwnode))
...error handling...
Nevertheless the resulting fwnode may have bumped the reference count
and hence caller of the above API is obliged to call fwnode_handle_put().
Since fwnode may be not valid either as NULL or error pointer the check
has to be performed there. This approach uglifies the code and adds
a point of making a mistake, i.e. forgetting about error point case.
To prevent this, allow an error pointer to be passed to the fwnode APIs.
Fixes:
83b34afb6b79 ("device property: Introduce fwnode_find_reference()")
Reported-by: Nuno Sá <nuno.sa@analog.com>
Tested-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Scally [Sun, 28 Nov 2021 23:24:55 +0000 (23:24 +0000)]
device property: Check fwnode->secondary when finding properties
[ Upstream commit
c097af1d0a8483b44fa30e86b311991d76b6ae67 ]
fwnode_property_get_reference_args() searches for named properties
against a fwnode_handle, but these could instead be against the fwnode's
secondary. If the property isn't found against the primary, check the
secondary to see if it's there instead.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20211128232455.39332-1-djrscally@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jan Kiszka [Fri, 4 Mar 2022 06:36:37 +0000 (07:36 +0100)]
efi: Add missing prototype for efi_capsule_setup_info
[ Upstream commit
aa480379d8bdb33920d68acfd90f823c8af32578 ]
Fixes "no previous declaration for 'efi_capsule_setup_info'" warnings
under W=1.
Fixes:
2959c95d510c ("efi/capsule: Add support for Quark security header")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/c28d3f86-dd72-27d1-e2c2-40971b8da6bd@siemens.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lin Ma [Tue, 12 Apr 2022 05:32:08 +0000 (13:32 +0800)]
NFC: NULL out the dev->rfkill to prevent UAF
[ Upstream commit
1b0e81416a24d6e9b8c2341e22e8bf48f8b8bfc9 ]
Commit
3e3b5dfcd16a ("NFC: reorder the logic in nfc_{un,}register_device")
assumes the device_is_registered() in function nfc_dev_up() will help
to check when the rfkill is unregistered. However, this check only
take effect when device_del(&dev->dev) is done in nfc_unregister_device().
Hence, the rfkill object is still possible be dereferenced.
The crash trace in latest kernel (5.18-rc2):
[ 68.760105] ==================================================================
[ 68.760330] BUG: KASAN: use-after-free in __lock_acquire+0x3ec1/0x6750
[ 68.760756] Read of size 8 at addr
ffff888009c93018 by task fuzz/313
[ 68.760756]
[ 68.760756] CPU: 0 PID: 313 Comm: fuzz Not tainted 5.18.0-rc2 #4
[ 68.760756] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 68.760756] Call Trace:
[ 68.760756] <TASK>
[ 68.760756] dump_stack_lvl+0x57/0x7d
[ 68.760756] print_report.cold+0x5e/0x5db
[ 68.760756] ? __lock_acquire+0x3ec1/0x6750
[ 68.760756] kasan_report+0xbe/0x1c0
[ 68.760756] ? __lock_acquire+0x3ec1/0x6750
[ 68.760756] __lock_acquire+0x3ec1/0x6750
[ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410
[ 68.760756] ? register_lock_class+0x18d0/0x18d0
[ 68.760756] lock_acquire+0x1ac/0x4f0
[ 68.760756] ? rfkill_blocked+0xe/0x60
[ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410
[ 68.760756] ? mutex_lock_io_nested+0x12c0/0x12c0
[ 68.760756] ? nla_get_range_signed+0x540/0x540
[ 68.760756] ? _raw_spin_lock_irqsave+0x4e/0x50
[ 68.760756] _raw_spin_lock_irqsave+0x39/0x50
[ 68.760756] ? rfkill_blocked+0xe/0x60
[ 68.760756] rfkill_blocked+0xe/0x60
[ 68.760756] nfc_dev_up+0x84/0x260
[ 68.760756] nfc_genl_dev_up+0x90/0xe0
[ 68.760756] genl_family_rcv_msg_doit+0x1f4/0x2f0
[ 68.760756] ? genl_family_rcv_msg_attrs_parse.constprop.0+0x230/0x230
[ 68.760756] ? security_capable+0x51/0x90
[ 68.760756] genl_rcv_msg+0x280/0x500
[ 68.760756] ? genl_get_cmd+0x3c0/0x3c0
[ 68.760756] ? lock_acquire+0x1ac/0x4f0
[ 68.760756] ? nfc_genl_dev_down+0xe0/0xe0
[ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410
[ 68.760756] netlink_rcv_skb+0x11b/0x340
[ 68.760756] ? genl_get_cmd+0x3c0/0x3c0
[ 68.760756] ? netlink_ack+0x9c0/0x9c0
[ 68.760756] ? netlink_deliver_tap+0x136/0xb00
[ 68.760756] genl_rcv+0x1f/0x30
[ 68.760756] netlink_unicast+0x430/0x710
[ 68.760756] ? memset+0x20/0x40
[ 68.760756] ? netlink_attachskb+0x740/0x740
[ 68.760756] ? __build_skb_around+0x1f4/0x2a0
[ 68.760756] netlink_sendmsg+0x75d/0xc00
[ 68.760756] ? netlink_unicast+0x710/0x710
[ 68.760756] ? netlink_unicast+0x710/0x710
[ 68.760756] sock_sendmsg+0xdf/0x110
[ 68.760756] __sys_sendto+0x19e/0x270
[ 68.760756] ? __ia32_sys_getpeername+0xa0/0xa0
[ 68.760756] ? fd_install+0x178/0x4c0
[ 68.760756] ? fd_install+0x195/0x4c0
[ 68.760756] ? kernel_fpu_begin_mask+0x1c0/0x1c0
[ 68.760756] __x64_sys_sendto+0xd8/0x1b0
[ 68.760756] ? lockdep_hardirqs_on+0xbf/0x130
[ 68.760756] ? syscall_enter_from_user_mode+0x1d/0x50
[ 68.760756] do_syscall_64+0x3b/0x90
[ 68.760756] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 68.760756] RIP: 0033:0x7f67fb50e6b3
...
[ 68.760756] RSP: 002b:
00007f67fa91fe90 EFLAGS:
00000293 ORIG_RAX:
000000000000002c
[ 68.760756] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f67fb50e6b3
[ 68.760756] RDX:
000000000000001c RSI:
0000559354603090 RDI:
0000000000000003
[ 68.760756] RBP:
00007f67fa91ff00 R08:
00007f67fa91fedc R09:
000000000000000c
[ 68.760756] R10:
0000000000000000 R11:
0000000000000293 R12:
00007ffe824d496e
[ 68.760756] R13:
00007ffe824d496f R14:
00007f67fa120000 R15:
0000000000000003
[ 68.760756] </TASK>
[ 68.760756]
[ 68.760756] Allocated by task 279:
[ 68.760756] kasan_save_stack+0x1e/0x40
[ 68.760756] __kasan_kmalloc+0x81/0xa0
[ 68.760756] rfkill_alloc+0x7f/0x280
[ 68.760756] nfc_register_device+0xa3/0x1a0
[ 68.760756] nci_register_device+0x77a/0xad0
[ 68.760756] nfcmrvl_nci_register_dev+0x20b/0x2c0
[ 68.760756] nfcmrvl_nci_uart_open+0xf2/0x1dd
[ 68.760756] nci_uart_tty_ioctl+0x2c3/0x4a0
[ 68.760756] tty_ioctl+0x764/0x1310
[ 68.760756] __x64_sys_ioctl+0x122/0x190
[ 68.760756] do_syscall_64+0x3b/0x90
[ 68.760756] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 68.760756]
[ 68.760756] Freed by task 314:
[ 68.760756] kasan_save_stack+0x1e/0x40
[ 68.760756] kasan_set_track+0x21/0x30
[ 68.760756] kasan_set_free_info+0x20/0x30
[ 68.760756] __kasan_slab_free+0x108/0x170
[ 68.760756] kfree+0xb0/0x330
[ 68.760756] device_release+0x96/0x200
[ 68.760756] kobject_put+0xf9/0x1d0
[ 68.760756] nfc_unregister_device+0x77/0x190
[ 68.760756] nfcmrvl_nci_unregister_dev+0x88/0xd0
[ 68.760756] nci_uart_tty_close+0xdf/0x180
[ 68.760756] tty_ldisc_kill+0x73/0x110
[ 68.760756] tty_ldisc_hangup+0x281/0x5b0
[ 68.760756] __tty_hangup.part.0+0x431/0x890
[ 68.760756] tty_release+0x3a8/0xc80
[ 68.760756] __fput+0x1f0/0x8c0
[ 68.760756] task_work_run+0xc9/0x170
[ 68.760756] exit_to_user_mode_prepare+0x194/0x1a0
[ 68.760756] syscall_exit_to_user_mode+0x19/0x50
[ 68.760756] do_syscall_64+0x48/0x90
[ 68.760756] entry_SYSCALL_64_after_hwframe+0x44/0xae
This patch just add the null out of dev->rfkill to make sure such
dereference cannot happen. This is safe since the device_lock() already
protect the check/write from data race.
Fixes:
3e3b5dfcd16a ("NFC: reorder the logic in nfc_{un,}register_device")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lv Ruyi [Tue, 12 Apr 2022 08:51:26 +0000 (08:51 +0000)]
ixp4xx_eth: fix error check return value of platform_get_irq()
[ Upstream commit
f45ba67eb74ab4b775616af731bdf8944afce3f1 ]
platform_get_irq() return negative value on failure, so null check of
return value is incorrect. Fix it by comparing whether it is less than
zero.
Fixes:
9055a2f59162 ("ixp4xx_eth: make ptp support a platform driver")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220412085126.2532924-1-lv.ruyi@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Russell King (Oracle) [Mon, 11 Apr 2022 09:45:56 +0000 (10:45 +0100)]
net: dsa: mt7530: 1G can also support 1000BASE-X link mode
[ Upstream commit
66f862563ed68717dfd84e808ca12705ed275ced ]
When using an external PHY connected using RGMII to mt7531 port 5, the
PHY can be used to used support 1000BASE-X connections. Moreover, if
1000BASE-T is supported, then we should allow 1000BASE-X as well, since
which are supported is a property of the PHY.
Therefore, it makes no sense to exclude this from the linkmodes when
1000BASE-T is supported.
Fixes:
c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul E. McKenney [Tue, 1 Mar 2022 01:40:49 +0000 (17:40 -0800)]
scftorture: Fix distribution of short handler delays
[ Upstream commit
8106bddbab5f0ba180e6d693c7c1fc6926d57caa ]
The scftorture test module's scf_handler() function is supposed to provide
three different distributions of short delays (including "no delay") and
one distribution of long delays, if specified by the scftorture.longwait
module parameter. However, the second of the two non-zero-wait short delays
is disabled due to the first such delay's "goto out" not being enclosed in
the "then" clause with the "udelay()".
This commit therefore adjusts the code to provide the intended set of
delays.
Fixes:
e9d338a0b179 ("scftorture: Add smp_call_function() torture test")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Mon, 11 Apr 2022 11:10:33 +0000 (11:10 +0000)]
spi: spi-ti-qspi: Fix return value handling of wait_for_completion_timeout
[ Upstream commit
8b1ea69a63eb62f97cef63e6d816b64ed84e8760 ]
wait_for_completion_timeout() returns unsigned long not int.
It returns 0 if timed out, and positive if completed.
The check for <= 0 is ambiguous and should be == 0 here
indicating timeout which is the only error case.
Fixes:
5720ec0a6d26 ("spi: spi-ti-qspi: Add DMA support for QSPI mmap read")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220411111034.24447-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Tue, 14 Dec 2021 10:08:37 +0000 (18:08 +0800)]
drm: mali-dp: potential dereference of null pointer
[ Upstream commit
73c3ed7495c67b8fbdc31cf58e6ca8757df31a33 ]
The return value of kzalloc() needs to be checked.
To avoid use of null pointer '&state->base' in case of the
failure of alloc.
Fixes:
99665d072183 ("drm: mali-dp: add malidp_crtc_state struct")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214100837.46912-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhou Qingyang [Wed, 1 Dec 2021 03:37:03 +0000 (11:37 +0800)]
drm/komeda: Fix an undefined behavior bug in komeda_plane_add()
[ Upstream commit
f5e284bb74ab296f98122673c7ecd22028b2c200 ]
In komeda_plane_add(), komeda_get_layer_fourcc_list() is assigned to
formats and used in drm_universal_plane_init().
drm_universal_plane_init() passes formats to
__drm_universal_plane_init(). __drm_universal_plane_init() further
passes formats to memcpy() as src parameter, which could lead to an
undefined behavior bug on failure of komeda_get_layer_fourcc_list().
Fix this bug by adding a check of formats.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_DRM_KOMEDA=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes:
61f1c4a8ab75 ("drm/komeda: Attach komeda_dev to DRM-KMS")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/dri-devel/20211201033704.32054-1-zhou1615@umn.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Fri, 18 Mar 2022 12:46:57 +0000 (13:46 +0100)]
nl80211: show SSID for P2P_GO interfaces
[ Upstream commit
a75971bc2b8453630e9f85e0beaa4da8db8277a3 ]
There's no real reason not to send the SSID to userspace
when it requests information about P2P_GO, it is, in that
respect, exactly the same as AP interfaces. Fix that.
Fixes:
44905265bc15 ("nl80211: don't expose wdev->ssid for most interfaces")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20220318134656.14354ae223f0.Ia25e85a512281b92e1645d4160766a4b1a471597@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paolo Abeni [Fri, 8 Apr 2022 19:45:56 +0000 (12:45 -0700)]
mptcp: reset the packet scheduler on PRIO change
[ Upstream commit
0e203c324752e13d22624ab7ffafe934fa06ab50 ]
Similar to the previous patch, for priority changes
requested by the local PM.
Reported-and-suggested-by: Davide Caratti <dcaratti@redhat.com>
Fixes:
067065422fcd ("mptcp: add the outgoing MP_PRIO support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maciej W. Rozycki [Thu, 31 Mar 2022 07:11:10 +0000 (08:11 +0100)]
x86/PCI: Fix ALi M1487 (IBC) PIRQ router link value interpretation
[ Upstream commit
4969e223b109754c2340a26bba9b1cf44f0cba9b ]
Fix an issue with commit
1ce849c75534 ("x86/PCI: Add support for the ALi
M1487 (IBC) PIRQ router") and correct ALi M1487 (IBC) PIRQ router link
value (`pirq' cookie) interpretation according to findings in the BIOS.
Credit to Nikolai Zhubr for the detective work as to the bit layout.
Fixes:
1ce849c75534 ("x86/PCI: Add support for the ALi M1487 (IBC) PIRQ router")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203310013270.44113@angie.orcam.me.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Fri, 8 Apr 2022 18:14:23 +0000 (11:14 -0700)]
libbpf: Don't error out on CO-RE relos for overriden weak subprogs
[ Upstream commit
e89d57d938c8fa80c457982154ed6110804814fe ]
During BPF static linking, all the ELF relocations and .BTF.ext
information (including CO-RE relocations) are preserved for __weak
subprograms that were logically overriden by either previous weak
subprogram instance or by corresponding "strong" (non-weak) subprogram.
This is just how native user-space linkers work, nothing new.
But libbpf is over-zealous when processing CO-RE relocation to error out
when CO-RE relocation belonging to such eliminated weak subprogram is
encountered. Instead of erroring out on this expected situation, log
debug-level message and skip the relocation.
Fixes:
db2b8b06423c ("libbpf: Support CO-RE relocations for multi-prog sections")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220408181425.2287230-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxime Ripard [Mon, 28 Mar 2022 15:36:56 +0000 (17:36 +0200)]
drm/vc4: txp: Force alpha to be 0xff if it's disabled
[ Upstream commit
5453343a88ede8b12812fced81ecd24cb888ccc3 ]
If we use a format that has padding instead of the alpha component (such
as XRGB8888), it appears that the Transposer will fill the padding to 0,
disregarding what was stored in the input buffer padding.
This leads to issues with IGT, since it will set the padding to 0xff,
but will then compare the CRC of the two frames which will thus fail.
Another nice side effect is that it is now possible to just use the
buffer as ARGB.
Fixes:
008095e065a8 ("drm/vc4: Add support for the transposer block")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220328153659.2382206-4-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxime Ripard [Mon, 28 Mar 2022 15:36:55 +0000 (17:36 +0200)]
drm/vc4: txp: Don't set TXP_VSTART_AT_EOF
[ Upstream commit
234998df929f14d00cbf2f1e81a7facb69fd9266 ]
The TXP_VSTART_AT_EOF will generate a second VSTART signal to the HVS.
However, the HVS waits for VSTART to enable the FIFO and will thus start
filling the FIFO before the start of the frame.
This leads to corruption at the beginning of the first frame, and
content from the previous frame at the beginning of the next frames.
Since one VSTART is enough, let's get rid of it.
Fixes:
008095e065a8 ("drm/vc4: Add support for the transposer block")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220328153659.2382206-3-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxime Ripard [Mon, 28 Mar 2022 15:36:54 +0000 (17:36 +0200)]
drm/vc4: hvs: Reset muxes at probe time
[ Upstream commit
8514e6b1f40319e31ac4aa3fbf606796786366c9 ]
By default, the HVS driver will force the HVS output 3 to be muxed to
the HVS channel 2. However, the Transposer can only be assigned to the
HVS channel 2, so whenever we try to use the writeback connector, we'll
mux its associated output (Output 2) to the channel 2.
This leads to both the output 2 and 3 feeding from the same channel,
which is explicitly discouraged in the documentation.
In order to avoid this, let's reset all the output muxes to their reset
value.
Fixes:
87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220328153659.2382206-2-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miles Chen [Tue, 15 Mar 2022 23:23:00 +0000 (07:23 +0800)]
drm/mediatek: Fix mtk_cec_mask()
[ Upstream commit
2c5d69b0a141e1e98febe3111e6f4fd8420493a5 ]
In current implementation, mtk_cec_mask() writes val into target register
and ignores the mask. After talking to our hdmi experts, mtk_cec_mask()
should read a register, clean only mask bits, and update (val | mask) bits
to the register.
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220315232301.2434-1-miles.chen@mediatek.com/
Fixes:
8f83f26891e1 ("drm/mediatek: Add HDMI support")
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Zhiqiang Lin <zhiqiang.lin@mediatek.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxime Ripard [Thu, 31 Mar 2022 14:37:39 +0000 (16:37 +0200)]
drm/vc4: hvs: Fix frame count register readout
[ Upstream commit
b51cd7ad143d2eb31a6df81c2183128920e47c2b ]
In order to get the field currently being output, the driver has been
using the display FIFO frame count in the HVS, reading a 6-bit field at
the offset 12 in the DISPSTATx register.
While that field is indeed at that location for the FIFO 1 and 2, the
one for the FIFO0 is actually in the DISPSTAT1 register, at the offset
18.
Fixes:
e538092cb15c ("drm/vc4: Enable precise vblank timestamping for interlaced modes.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220331143744.777652-3-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ammar Faizi [Tue, 29 Mar 2022 10:47:04 +0000 (17:47 +0700)]
x86/delay: Fix the wrong asm constraint in delay_loop()
[ Upstream commit
b86eb74098a92afd789da02699b4b0dd3f73b889 ]
The asm constraint does not reflect the fact that the asm statement can
modify the value of the local variable loops. Which it does.
Specifying the wrong constraint may lead to undefined behavior, it may
clobber random stuff (e.g. local variable, important temporary value in
regs, etc.). This is especially dangerous when the compiler decides to
inline the function and since it doesn't know that the value gets
modified, it might decide to use it from a register directly without
reloading it.
Change the constraint to "+a" to denote that the first argument is an
input and an output argument.
[ bp: Fix typo, massage commit message. ]
Fixes:
e01b70ef3eb3 ("x86: fix bug in arch/i386/lib/delay.c file, delay_loop function")
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220329104705.65256-2-ammarfaizi2@gnuweeb.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Mon, 4 Apr 2022 09:35:25 +0000 (09:35 +0000)]
ASoC: mediatek: Fix missing of_node_put in mt2701_wm8960_machine_probe
[ Upstream commit
05654431a18fe24e5e46a375d98904134628a102 ]
This node pointer is returned by of_parse_phandle() with
refcount incremented in this function.
Calling of_node_put() to avoid the refcount leak.
Fixes:
8625c1dbd876 ("ASoC: mediatek: Add mt2701-wm8960 machine driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220404093526.30004-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Mon, 4 Apr 2022 09:29:01 +0000 (09:29 +0000)]
ASoC: mediatek: Fix error handling in mt8173_max98090_dev_probe
[ Upstream commit
4f4e0454e226de3bf4efd7e7924d1edc571c52d5 ]
Call of_node_put(platform_node) to avoid refcount leak in
the error path.
Fixes:
94319ba10eca ("ASoC: mediatek: Use platform_of_node for machine drivers")
Fixes:
493433785df0 ("ASoC: mediatek: mt8173: fix device_node leak")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220404092903.26725-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuldeep Singh [Mon, 28 Mar 2022 19:20:06 +0000 (00:50 +0530)]
spi: qcom-qspi: Add minItems to interconnect-names
[ Upstream commit
e23d86c49a9c78e8dbe3abff20b30812b26ab427 ]
Add minItems constraint to interconnect-names as well. The schema
currently tries to match 2 names and fail for DTs with single entry.
With the change applied, below interconnect-names values are possible:
['qspi-config'], ['qspi-config', 'qspi-memory']
Fixes:
8f9c291558ea ("dt-bindings: spi: Add interconnect binding for QSPI")
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220328192006.18523-1-singh.kuldeep87k@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuanhong Guo [Sun, 20 Mar 2022 09:59:57 +0000 (17:59 +0800)]
mtd: spinand: gigadevice: fix Quad IO for GD5F1GQ5UExxG
[ Upstream commit
a4f9dd55c5e1bb951db6f1dee20e62e0103f3438 ]
Read From Cache Quad IO (EBH) uses 2 dummy bytes on this chip according
to page 23 of the datasheet[0].
[0]: https://www.gigadevice.com/datasheet/gd5f1gq5xexxg/
Fixes:
469b99248985 ("mtd: spinand: gigadevice: Support GD5F1GQ5UExxG")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220320100001.247905-2-gch981213@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Thu, 31 Mar 2022 15:05:00 +0000 (17:05 +0200)]
drm: bridge: icn6211: Fix HFP_HSW_HBP_HI and HFP_MIN handling
[ Upstream commit
c0ff7a649d62105a9308cc3ac36e52a4669d9cb4 ]
The HFP_HSW_HBP_HI register must be programmed with 2 LSbits of each
Horizontal Front Porch/Sync/Back Porch. Currently the driver programs
this register to 0, which breaks displays with either value above 255.
The HFP_MIN register must be set to the same value as HFP_LI, otherwise
there is visible image distortion, usually in the form of missing lines
at the bottom of the panel.
Fix this by correctly programming the HFP_HSW_HBP_HI and HFP_MIN registers.
Acked-by: Maxime Ripard <maxime@cerno.tech>
Fixes:
ce517f18944e3 ("drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-3-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Thu, 31 Mar 2022 15:04:59 +0000 (17:04 +0200)]
drm: bridge: icn6211: Fix register layout
[ Upstream commit
2dcec57b3734029cc1adc5cb872f61e21609eed4 ]
The chip register layout has nothing to do with MIPI DCS, the registers
incorrectly marked as MIPI DCS in the driver are regular chip registers
often with completely different function.
Fill in the actual register names and bits from [1] and [2] and add the
entire register layout, since the documentation for this chip is hard to
come by.
[1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/gpu/drm/bridge/icn6211.c
[2] https://github.com/tdjastrzebski/ICN6211-Configurator
Acked-by: Maxime Ripard <maxime@cerno.tech>
Fixes:
ce517f18944e3 ("drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-2-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lucas Stach [Mon, 21 Mar 2022 10:47:05 +0000 (11:47 +0100)]
drm/bridge: adv7511: clean up CEC adapter when probe fails
[ Upstream commit
7ed2b0dabf7a22874cb30f8878df239ef638eb53 ]
When the probe routine fails we also need to clean up the
CEC adapter registered in adv7511_cec_init().
Fixes:
3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321104705.2804423-1-l.stach@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jani Nikula [Wed, 30 Mar 2022 17:04:26 +0000 (20:04 +0300)]
drm/edid: fix invalid EDID extension block filtering
[ Upstream commit
3aefc722ff52076407203b6af9713de567993adf ]
The invalid EDID block filtering uses the number of valid EDID
extensions instead of all EDID extensions for looping the extensions in
the copy. This is fine, by coincidence, if all the invalid blocks are at
the end of the EDID. However, it's completely broken if there are
invalid extensions in the middle; the invalid blocks are included and
valid blocks are excluded.
Fix it by modifying the base block after, not before, the copy.
Fixes:
14544d0937bf ("drm/edid: Only print the bad edid when aborting")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330170426.349248-1-jani.nikula@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wenli Looi [Sun, 20 Mar 2022 23:30:08 +0000 (17:30 -0600)]
ath9k: fix ar9003_get_eepmisc
[ Upstream commit
9aaff3864b603408c02c629957ae8d8ff5d5a4f2 ]
The current implementation is reading the wrong eeprom type.
Fixes:
d8ec2e2a63e8 ("ath9k: Add an eeprom_ops callback for retrieving the eepmisc value")
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220320233010.123106-5-wlooi@ucalgary.ca
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicolas Belin [Wed, 16 Mar 2022 13:57:32 +0000 (14:57 +0100)]
drm: bridge: it66121: Fix the register page length
[ Upstream commit
003a1bd6a2a55c16cb2451153533dbedb12bebec ]
Set the register page length or window length to
0x100 according to the documentation.
Fixes:
988156dc2fc9 ("drm: bridge: add it66121 driver")
Signed-off-by: Nicolas Belin <nbelin@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220316135733.173950-3-nbelin@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Niels Dossche [Mon, 21 Mar 2022 10:58:23 +0000 (12:58 +0200)]
ath11k: acquire ab->base_lock in unassign when finding the peer by addr
[ Upstream commit
2db80f93869d491be57cbc2b36f30d0d3a0e5bde ]
ath11k_peer_find_by_addr states via lockdep that ab->base_lock must be
held when calling that function in order to protect the list. All
callers except ath11k_mac_op_unassign_vif_chanctx have that lock
acquired when calling ath11k_peer_find_by_addr. That lock is also not
transitively held by a path towards ath11k_mac_op_unassign_vif_chanctx.
The solution is to acquire the lock when calling
ath11k_peer_find_by_addr inside ath11k_mac_op_unassign_vif_chanctx.
I am currently working on a static analyser to detect missing locks and
this was a reported case. I manually verified the report by looking at
the code, but I do not have real hardware so this is compile tested
only.
Fixes:
701e48a43e15 ("ath11k: add packet log support for QCA6390")
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220314215253.92658-1-dossche.niels@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zack Rusin [Fri, 18 Mar 2022 17:43:28 +0000 (13:43 -0400)]
drm/vmwgfx: Fix an invalid read
[ Upstream commit
10a26e0d5fc3574f63ce8a6cf28381b126317f40 ]
vmw_move assumed that buffers to be moved would always be
vmw_buffer_object's but after introduction of new placement for mob
pages that's no longer the case.
The resulting invalid read didn't have any practical consequences
because the memory isn't used unless the object actually is a
vmw_buffer_object.
Fix it by moving the cast to the spot where the results are used.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes:
f6be23264bba ("drm/vmwgfx: Introduce a new placement for MOB page tables")
Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-2-zack@kde.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Noralf Trønnes [Wed, 24 Nov 2021 15:07:52 +0000 (16:07 +0100)]
dt-bindings: display: sitronix, st7735r: Fix backlight in example
[ Upstream commit
471e201f543559e2cb19b182b680ebf04d80ee31 ]
The backlight property was lost during conversion to yaml in commit
abdd9e3705c8 ("dt-bindings: display: sitronix,st7735r: Convert to DT schema").
Put it back.
Fixes:
abdd9e3705c8 ("dt-bindings: display: sitronix,st7735r: Convert to DT schema")
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124150757.17929-2-noralf@tronnes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nikita Yushchenko [Sat, 25 Dec 2021 06:31:51 +0000 (09:31 +0300)]
drm/bridge_connector: enable HPD by default if supported
[ Upstream commit
09077bc3116581f4d1cb961ec359ad56586e370b ]
Hotplug events reported by bridge drivers over drm_bridge_hpd_notify()
get ignored unless somebody calls drm_bridge_hpd_enable(). When the
connector for the bridge is bridge_connector, such a call is done from
drm_bridge_connector_enable_hpd().
However drm_bridge_connector_enable_hpd() is never called on init paths,
documentation suggests that it is intended for suspend/resume paths.
In result, once encoders are switched to bridge_connector,
bridge-detected HPD stops working.
This patch adds a call to that API on init path.
This fixes HDMI HPD with rcar-du + adv7513 case when adv7513 reports HPD
events via interrupts.
Fixes:
c24110a8fd09 ("drm: rcar-du: Use drm_bridge_connector_init() helper")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211225063151.2110878-1-nikita.yoush@cogentembedded.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Linus Torvalds [Sat, 28 May 2022 18:08:48 +0000 (11:08 -0700)]
drm: fix EDID struct for old ARM OABI format
[ Upstream commit
47f15561b69e226bfc034e94ff6dbec51a4662af ]
When building the kernel for arm with the "-mabi=apcs-gnu" option, gcc
will force alignment of all structures and unions to a word boundary
(see also STRUCTURE_SIZE_BOUNDARY and the "-mstructure-size-boundary=XX"
option if you're a gcc person), even when the members of said structures
do not want or need said alignment.
This completely messes up the structure alignment of 'struct edid' on
those targets, because even though all the embedded structures are
marked with "__attribute__((packed))", the unions that contain them are
not.
This was exposed by commit
f1e4c916f97f ("drm/edid: add EDID block count
and size helpers"), but the bug is pre-existing. That commit just made
the structure layout problem cause a build failure due to the addition
of the
BUILD_BUG_ON(sizeof(*edid) != EDID_LENGTH);
sanity check in drivers/gpu/drm/drm_edid.c:edid_block_data().
This legacy union alignment should probably not be used in the first
place, but we can fix the layout by adding the packed attribute to the
union entries even when each member is already packed and it shouldn't
matter in a sane build environment.
You can see this issue with a trivial test program:
union {
struct {
char c[5];
};
struct {
char d;
unsigned e;
} __attribute__((packed));
} a = { "1234" };
where building this with a normal "gcc -S" will result in the expected
5-byte size of said union:
.type a, @object
.size a, 5
but with an ARM compiler and the old ABI:
arm-linux-gnu-gcc -mabi=apcs-gnu -mfloat-abi=soft -S t.c
you get
.type a, %object
.size a, 8
instead, because even though each member of the union is packed, the
union itself still gets aligned.
This was reported by Sudip for the spear3xx_defconfig target.
Link: https://lore.kernel.org/lkml/YpCUzStDnSgQLNFN@debian/
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lad Prabhakar [Wed, 25 May 2022 21:39:28 +0000 (14:39 -0700)]
Input: gpio-keys - cancel delayed work only in case of GPIO
[ Upstream commit
cee409bbba0d1bd3fb73064fb480ff365f453b5d ]
gpio_keys module can either accept gpios or interrupts. The module
initializes delayed work in case of gpios only and is only used if
debounce timer is not used, so make sure cancel_delayed_work_sync()
is called only when its gpio-backed and debounce_use_hrtimer is false.
This fixes the issue seen below when the gpio_keys module is unloaded and
an interrupt pin is used instead of GPIO:
[ 360.297569] ------------[ cut here ]------------
[ 360.302303] WARNING: CPU: 0 PID: 237 at kernel/workqueue.c:3066 __flush_work+0x414/0x470
[ 360.310531] Modules linked in: gpio_keys(-)
[ 360.314797] CPU: 0 PID: 237 Comm: rmmod Not tainted 5.18.0-rc5-arm64-renesas-00116-g73636105874d-dirty #166
[ 360.324662] Hardware name: Renesas SMARC EVK based on r9a07g054l2 (DT)
[ 360.331270] pstate:
60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 360.338318] pc : __flush_work+0x414/0x470
[ 360.342385] lr : __cancel_work_timer+0x140/0x1b0
[ 360.347065] sp :
ffff80000a7fba00
[ 360.350423] x29:
ffff80000a7fba00 x28:
ffff000012b9c5c0 x27:
0000000000000000
[ 360.357664] x26:
ffff80000a7fbb80 x25:
ffff80000954d0a8 x24:
0000000000000001
[ 360.364904] x23:
ffff800009757000 x22:
0000000000000000 x21:
ffff80000919b000
[ 360.372143] x20:
ffff00000f5974e0 x19:
ffff00000f5974e0 x18:
ffff8000097fcf48
[ 360.379382] x17:
0000000000000000 x16:
0000000000000000 x15:
0000000000053f40
[ 360.386622] x14:
ffff800009850e88 x13:
0000000000000002 x12:
000000000000a60c
[ 360.393861] x11:
000000000000a610 x10:
0000000000000000 x9 :
0000000000000008
[ 360.401100] x8 :
0101010101010101 x7 :
00000000a473c394 x6 :
0080808080808080
[ 360.408339] x5 :
0000000000000001 x4 :
0000000000000000 x3 :
ffff80000919b458
[ 360.415578] x2 :
ffff8000097577f0 x1 :
0000000000000001 x0 :
0000000000000000
[ 360.422818] Call trace:
[ 360.425299] __flush_work+0x414/0x470
[ 360.429012] __cancel_work_timer+0x140/0x1b0
[ 360.433340] cancel_delayed_work_sync+0x10/0x18
[ 360.437931] gpio_keys_quiesce_key+0x28/0x58 [gpio_keys]
[ 360.443327] devm_action_release+0x10/0x18
[ 360.447481] release_nodes+0x8c/0x1a0
[ 360.451194] devres_release_all+0x90/0x100
[ 360.455346] device_unbind_cleanup+0x14/0x60
[ 360.459677] device_release_driver_internal+0xe8/0x168
[ 360.464883] driver_detach+0x4c/0x90
[ 360.468509] bus_remove_driver+0x54/0xb0
[ 360.472485] driver_unregister+0x2c/0x58
[ 360.476462] platform_driver_unregister+0x10/0x18
[ 360.481230] gpio_keys_exit+0x14/0x828 [gpio_keys]
[ 360.486088] __arm64_sys_delete_module+0x1e0/0x270
[ 360.490945] invoke_syscall+0x40/0xf8
[ 360.494661] el0_svc_common.constprop.3+0xf0/0x110
[ 360.499515] do_el0_svc+0x20/0x78
[ 360.502877] el0_svc+0x48/0xf8
[ 360.505977] el0t_64_sync_handler+0x88/0xb0
[ 360.510216] el0t_64_sync+0x148/0x14c
[ 360.513930] irq event stamp: 4306
[ 360.517288] hardirqs last enabled at (4305): [<
ffff8000080b0300>] __cancel_work_timer+0x130/0x1b0
[ 360.526359] hardirqs last disabled at (4306): [<
ffff800008d194fc>] el1_dbg+0x24/0x88
[ 360.534204] softirqs last enabled at (4278): [<
ffff8000080104a0>] _stext+0x4a0/0x5e0
[ 360.542133] softirqs last disabled at (4267): [<
ffff8000080932ac>] irq_exit_rcu+0x18c/0x1b0
[ 360.550591] ---[ end trace
0000000000000000 ]---
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220524135822.14764-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Miller [Fri, 20 May 2022 18:37:06 +0000 (14:37 -0400)]
RDMA/hfi1: Prevent panic when SDMA is disabled
[ Upstream commit
629e052d0c98e46dde9f0824f0aa437f678d9b8f ]
If the hfi1 module is loaded with HFI1_CAP_SDMA off, a call to
hfi1_write_iter() will dereference a NULL pointer and panic. A typical
stack frame is:
sdma_select_user_engine [hfi1]
hfi1_user_sdma_process_request [hfi1]
hfi1_write_iter [hfi1]
do_iter_readv_writev
do_iter_write
vfs_writev
do_writev
do_syscall_64
The fix is to test for SDMA in hfi1_write_iter() and fail the I/O with
EINVAL.
Link: https://lore.kernel.org/r/20220520183706.48973.79803.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Douglas Miller <doug.miller@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Steve French [Tue, 24 May 2022 01:42:03 +0000 (20:42 -0500)]
smb3: check for null tcon
[ Upstream commit
bbdf6cf56c88845fb0b713cbf5c6623c53fe40d8 ]
Although unlikely to be null, it is confusing to use a pointer
before checking for it to be null so move the use down after
null check.
Addresses-Coverity: 1517586 ("Null pointer dereferences (REVERSE_INULL)")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peng Wu [Mon, 25 Apr 2022 08:12:45 +0000 (08:12 +0000)]
powerpc/iommu: Add missing of_node_put in iommu_init_early_dart
[ Upstream commit
57b742a5b8945118022973e6416b71351df512fb ]
The device_node pointer is returned by of_find_compatible_node
with refcount incremented. We should use of_node_put() to avoid
the refcount leak.
Signed-off-by: Peng Wu <wupeng58@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220425081245.21705-1-wupeng58@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Finn Thain [Thu, 7 Apr 2022 10:11:32 +0000 (20:11 +1000)]
macintosh/via-pmu: Fix build failure when CONFIG_INPUT is disabled
[ Upstream commit
86ce436e30d86327c9f5260f718104ae7b21f506 ]
drivers/macintosh/via-pmu-event.o: In function `via_pmu_event':
via-pmu-event.c:(.text+0x44): undefined reference to `input_event'
via-pmu-event.c:(.text+0x68): undefined reference to `input_event'
via-pmu-event.c:(.text+0x94): undefined reference to `input_event'
via-pmu-event.c:(.text+0xb8): undefined reference to `input_event'
drivers/macintosh/via-pmu-event.o: In function `via_pmu_event_init':
via-pmu-event.c:(.init.text+0x20): undefined reference to `input_allocate_device'
via-pmu-event.c:(.init.text+0xc4): undefined reference to `input_register_device'
via-pmu-event.c:(.init.text+0xd4): undefined reference to `input_free_device'
make[1]: *** [Makefile:1155: vmlinux] Error 1
make: *** [Makefile:350: __build_one_by_one] Error 2
Don't call into the input subsystem unless CONFIG_INPUT is built-in.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5edbe76ce68227f71e09af4614cc4c1bd61c7ec8.1649326292.git.fthain@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lv Ruyi [Thu, 7 Apr 2022 09:00:43 +0000 (09:00 +0000)]
powerpc/powernv: fix missing of_node_put in uv_init()
[ Upstream commit
3ffa9fd471f57f365bc54fc87824c530422f64a5 ]
of_find_compatible_node() returns node pointer with refcount incremented,
use of_node_put() on it when done.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220407090043.2491854-1-lv.ruyi@zte.com.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lv Ruyi [Sat, 2 Apr 2022 01:34:19 +0000 (01:34 +0000)]
powerpc/xics: fix refcount leak in icp_opal_init()
[ Upstream commit
5dd9e27ea4a39f7edd4bf81e9e70208e7ac0b7c9 ]
The of_find_compatible_node() function returns a node pointer with
refcount incremented, use of_node_put() on it when done.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220402013419.2410298-1-lv.ruyi@zte.com.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
Haren Myneni [Sat, 9 Apr 2022 08:44:16 +0000 (01:44 -0700)]
powerpc/powernv/vas: Assign real address to rx_fifo in vas_rx_win_attr
[ Upstream commit
c127d130f6d59fa81701f6b04023cf7cd1972fb3 ]
In init_winctx_regs(), __pa() is called on winctx->rx_fifo and this
function is called to initialize registers for receive and fault
windows. But the real address is passed in winctx->rx_fifo for
receive windows and the virtual address for fault windows which
causes errors with DEBUG_VIRTUAL enabled. Fixes this issue by
assigning only real address to rx_fifo in vas_rx_win_attr struct
for both receive and fault windows.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/338e958c7ab8f3b266fa794a1f80f99b9671829e.camel@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vasily Averin [Wed, 11 May 2022 09:46:53 +0000 (12:46 +0300)]
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
[ Upstream commit
2b132903de7124dd9a758be0c27562e91a510848 ]
Fixes following sparse warnings:
CHECK mm/vmscan.c
mm/vmscan.c: note: in included file (through
include/trace/trace_events.h, include/trace/define_trace.h,
include/trace/events/vmscan.h):
./include/trace/events/vmscan.h:281:1: sparse: warning:
cast to restricted isolate_mode_t
./include/trace/events/vmscan.h:281:1: sparse: warning:
restricted isolate_mode_t degrades to integer
Link: https://lkml.kernel.org/r/e85d7ff2-fd10-53f8-c24e-ba0458439c1b@openvz.org
Signed-off-by: Vasily Averin <vvs@openvz.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:01 +0000 (20:23 -0700)]
alpha: fix alloc_zeroed_user_highpage_movable()
[ Upstream commit
f9c668d281aa20e38c9bda3b7b0adeb8891aa15e ]
Due to a typo, the final argument to alloc_page_vma() didn't refer to a
real variable. This only affected CONFIG_NUMA, which was marked BROKEN in
2006 and removed from alpha in 2021. Found due to a refactoring patch.
Link: https://lkml.kernel.org/r/20220504182857.4013401-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicholas Piggin [Thu, 3 Mar 2022 05:33:15 +0000 (15:33 +1000)]
KVM: PPC: Book3S HV Nested: L2 LPCR should inherit L1 LPES setting
[ Upstream commit
2852ebfa10afdcefff35ec72c8da97141df9845c ]
The L1 should not be able to adjust LPES mode for the L2. Setting LPES
if the L0 needs it clear would cause external interrupts to be sent to
L2 and missed by the L0.
Clearing LPES when it may be set, as typically happens with XIVE enabled
could cause a performance issue despite having no native XIVE support in
the guest, because it will cause mediated interrupts for the L2 to be
taken in HV mode, which then have to be injected.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220303053315.1056880-7-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yicong Yang [Mon, 4 Apr 2022 06:25:39 +0000 (14:25 +0800)]
PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()
[ Upstream commit
a91ee0e9fca9d7501286cfbced9b30a33e52740a ]
The sysfs sriov_numvfs_store() path acquires the device lock before the
config space access lock:
sriov_numvfs_store
device_lock # A (1) acquire device lock
sriov_configure
vfio_pci_sriov_configure # (for example)
vfio_pci_core_sriov_configure
pci_disable_sriov
sriov_disable
pci_cfg_access_lock
pci_wait_cfg # B (4) wait for dev->block_cfg_access == 0
Previously, pci_dev_lock() acquired the config space access lock before the
device lock:
pci_dev_lock
pci_cfg_access_lock
dev->block_cfg_access = 1 # B (2) set dev->block_cfg_access = 1
device_lock # A (3) wait for device lock
Any path that uses pci_dev_lock(), e.g., pci_reset_function(), may
deadlock with sriov_numvfs_store() if the operations occur in the sequence
(1) (2) (3) (4).
Avoid the deadlock by reversing the order in pci_dev_lock() so it acquires
the device lock before the config space access lock, the same as the
sriov_numvfs_store() path.
[bhelgaas: combined and adapted commit log from Jay Zhou's independent
subsequent posting:
https://lore.kernel.org/r/
20220404062539.1710-1-jianjay.zhou@huawei.com]
Link: https://lore.kernel.org/linux-pci/1583489997-17156-1-git-send-email-yangyicong@hisilicon.com/
Also-posted-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Laurent Dufour [Wed, 4 May 2022 10:12:44 +0000 (12:12 +0200)]
powerpc/rtas: Keep MSR[RI] set when calling RTAS
[ Upstream commit
b6b1c3ce06ca438eb24e0f45bf0e63ecad0369f5 ]
RTAS runs in real mode (MSR[DR] and MSR[IR] unset) and in 32-bit big
endian mode (MSR[SF,LE] unset).
The change in MSR is done in enter_rtas() in a relatively complex way,
since the MSR value could be hardcoded.
Furthermore, a panic has been reported when hitting the watchdog interrupt
while running in RTAS, this leads to the following stack trace:
watchdog: CPU 24 Hard LOCKUP
watchdog: CPU 24 TB:
997512652051031, last heartbeat TB:
997504470175378 (15980ms ago)
...
Supported: No, Unreleased kernel
CPU: 24 PID: 87504 Comm: drmgr Kdump: loaded Tainted: G E X 5.14.21-150400.71.1.bz196362_2-default #1 SLE15-SP4 (unreleased)
0d821077ef4faa8dfaf370efb5fdca1fa35f4e2c
NIP:
000000001fb41050 LR:
000000001fb4104c CTR:
0000000000000000
REGS:
c00000000fc33d60 TRAP: 0100 Tainted: G E X (5.14.21-150400.71.1.bz196362_2-default)
MSR:
8000000002981000 <SF,VEC,VSX,ME> CR:
48800002 XER:
20040020
CFAR:
000000000000011c IRQMASK: 1
GPR00:
0000000000000003 ffffffffffffffff 0000000000000001 00000000000050dc
GPR04:
000000001ffb6100 0000000000000020 0000000000000001 000000001fb09010
GPR08:
0000000020000000 0000000000000000 0000000000000000 0000000000000000
GPR12:
80040000072a40a8 c00000000ff8b680 0000000000000007 0000000000000034
GPR16:
000000001fbf6e94 000000001fbf6d84 000000001fbd1db0 000000001fb3f008
GPR20:
000000001fb41018 ffffffffffffffff 000000000000017f fffffffffffff68f
GPR24:
000000001fb18fe8 000000001fb3e000 000000001fb1adc0 000000001fb1cf40
GPR28:
000000001fb26000 000000001fb460f0 000000001fb17f18 000000001fb17000
NIP [
000000001fb41050] 0x1fb41050
LR [
000000001fb4104c] 0x1fb4104c
Call Trace:
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
Oops: Unrecoverable System Reset, sig: 6 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
...
Supported: No, Unreleased kernel
CPU: 24 PID: 87504 Comm: drmgr Kdump: loaded Tainted: G E X 5.14.21-150400.71.1.bz196362_2-default #1 SLE15-SP4 (unreleased)
0d821077ef4faa8dfaf370efb5fdca1fa35f4e2c
NIP:
000000001fb41050 LR:
000000001fb4104c CTR:
0000000000000000
REGS:
c00000000fc33d60 TRAP: 0100 Tainted: G E X (5.14.21-150400.71.1.bz196362_2-default)
MSR:
8000000002981000 <SF,VEC,VSX,ME> CR:
48800002 XER:
20040020
CFAR:
000000000000011c IRQMASK: 1
GPR00:
0000000000000003 ffffffffffffffff 0000000000000001 00000000000050dc
GPR04:
000000001ffb6100 0000000000000020 0000000000000001 000000001fb09010
GPR08:
0000000020000000 0000000000000000 0000000000000000 0000000000000000
GPR12:
80040000072a40a8 c00000000ff8b680 0000000000000007 0000000000000034
GPR16:
000000001fbf6e94 000000001fbf6d84 000000001fbd1db0 000000001fb3f008
GPR20:
000000001fb41018 ffffffffffffffff 000000000000017f fffffffffffff68f
GPR24:
000000001fb18fe8 000000001fb3e000 000000001fb1adc0 000000001fb1cf40
GPR28:
000000001fb26000 000000001fb460f0 000000001fb17f18 000000001fb17000
NIP [
000000001fb41050] 0x1fb41050
LR [
000000001fb4104c] 0x1fb4104c
Call Trace:
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
---[ end trace
3ddec07f638c34a2 ]---
This happens because MSR[RI] is unset when entering RTAS but there is no
valid reason to not set it here.
RTAS is expected to be called with MSR[RI] as specified in PAPR+ section
"7.2.1 Machine State":
R1–7.2.1–9. If called with MSR[RI] equal to 1, then RTAS must protect
its own critical regions from recursion by setting the MSR[RI] bit to
0 when in the critical regions.
Fixing this by reviewing the way MSR is compute before calling RTAS. Now a
hardcoded value meaning real mode, 32 bits big endian mode and Recoverable
Interrupt is loaded. In the case MSR[S] is set, it will remain set while
entering RTAS as only urfid can unset it (thanks Fabiano).
In addition a check is added in do_enter_rtas() to detect calls made with
MSR[RI] unset, as we are forcing it on later.
This patch has been tested on the following machines:
Power KVM Guest
P8 S822L (host Ubuntu kernel 5.11.0-49-generic)
PowerVM LPAR
P8 9119-MME (FW860.A1)
p9 9008-22L (FW950.00)
P10 9080-HEX (FW1010.00)
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220504101244.12107-1-ldufour@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Viresh Kumar [Wed, 4 May 2022 08:21:35 +0000 (13:51 +0530)]
cpufreq: Avoid unnecessary frequency updates due to mismatch
[ Upstream commit
f55ae08c89873e140c7cac2a7fa161d31a0d60cf ]
For some platforms, the frequency returned by hardware may be slightly
different from what is provided in the frequency table. For example,
hardware may return 499 MHz instead of 500 MHz. In such cases it is
better to avoid getting into unnecessary frequency updates, as we may
end up switching policy->cur between the two and sending unnecessary
pre/post update notifications, etc.
This patch has chosen allows the hardware frequency and table frequency
to deviate by 1 MHz for now, we may want to increase it a bit later on
if someone still complains.
Reported-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Jia-wei Chang <jia-wei.chang@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peng Wu [Thu, 28 Apr 2022 10:43:06 +0000 (10:43 +0000)]
ARM: hisi: Add missing of_node_put after of_find_compatible_node
[ Upstream commit
9bc72e47d4630d58a840a66a869c56b29554cfe4 ]
of_find_compatible_node will increment the refcount of the returned
device_node. Calling of_node_put() to avoid the refcount leak
Signed-off-by: Peng Wu <wupeng58@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Tue, 26 Apr 2022 18:34:43 +0000 (20:34 +0200)]
ARM: dts: exynos: add atmel,24c128 fallback to Samsung EEPROM
[ Upstream commit
f038e8186fbc5723d7d38c6fa1d342945107347e ]
The Samsung s524ad0xd1 EEPROM should use atmel,24c128 fallback,
according to the AT24 EEPROM bindings.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220426183443.243113-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peng Wu [Thu, 28 Apr 2022 23:03:56 +0000 (01:03 +0200)]
ARM: versatile: Add missing of_node_put in dcscb_init
[ Upstream commit
23b44f9c649bbef10b45fa33080cd8b4166800ae ]
The device_node pointer is returned by of_find_compatible_node
with refcount incremented. We should use of_node_put() to avoid
the refcount leak.
Signed-off-by: Peng Wu <wupeng58@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220428230356.69418-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Fri, 29 Apr 2022 08:26:37 +0000 (16:26 +0800)]
pinctrl: renesas: rzn1: Fix possible null-ptr-deref in sh_pfc_map_resources()
[ Upstream commit
2f661477c2bb8068194dbba9738d05219f111c6e ]
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220429082637.1308182-2-yangyingliang@huawei.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
OGAWA Hirofumi [Fri, 29 Apr 2022 21:38:02 +0000 (14:38 -0700)]
fat: add ratelimit to fat*_ent_bread()
[ Upstream commit
183c3237c928109d2008c0456dff508baf692b20 ]
fat*_ent_bread() can be the cause of too many report on I/O error path.
So use fat_msg_ratelimit() instead.
Link: https://lkml.kernel.org/r/87bkxogfeq.fsf@mail.parknet.co.jp
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reported-by: qianfan <qianfanguijin@163.com>
Tested-by: qianfan <qianfanguijin@163.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hari Bathini [Wed, 21 Apr 2021 17:50:52 +0000 (23:20 +0530)]
powerpc/fadump: Fix fadump to work with a different endian capture kernel
[ Upstream commit
b74196af372f7cb4902179009265fe63ac81824f ]
Dump capture would fail if capture kernel is not of the endianess as the
production kernel, because the in-memory data structure (struct
opal_fadump_mem_struct) shared across production kernel and capture
kernel assumes the same endianess for both the kernels, which doesn't
have to be true always. Fix it by having a well-defined endianess for
struct opal_fadump_mem_struct.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161902744901.86147.14719228311655123526.stgit@hbathini
Signed-off-by: Sasha Levin <sashal@kernel.org>
Janusz Krzysztofik [Sun, 10 Apr 2022 13:07:54 +0000 (15:07 +0200)]
ARM: OMAP1: clock: Fix UART rate reporting algorithm
[ Upstream commit
338d5d476cde853dfd97378d20496baabc2ce3c0 ]
Since its introduction to the mainline kernel, omap1_uart_recalc() helper
makes incorrect use of clk->enable_bit as a ready to use bitmap mask while
it only provides the bit number. Fix it.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Thu, 21 Apr 2022 06:41:01 +0000 (08:41 +0200)]
ALSA: usb-audio: Move generic implicit fb quirk entries into quirks.c
[ Upstream commit
67d64069bc0867e52e73a1e255b17462005ca9b4 ]
Use the new quirk bits to manage the generic implicit fb quirk
entries. This makes easier to compare with other devices.
Link: https://lore.kernel.org/r/20220421064101.12456-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Thu, 21 Apr 2022 06:41:00 +0000 (08:41 +0200)]
ALSA: usb-audio: Add quirk bits for enabling/disabling generic implicit fb
[ Upstream commit
0f1f7a6661394fe4a53db254c346d6aa2dd64397 ]
For making easier to test, add the new quirk_flags bits 17 and 18 to
enable and disable the generic implicit feedback mode. The bit 17 is
equivalent with implicit_fb=1 option, applying the generic implicit
feedback sync mode. OTOH, the bit 18 disables the implicit fb mode
forcibly.
Link: https://lore.kernel.org/r/20220421064101.12456-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joel Selvaraj [Wed, 30 Mar 2022 06:45:04 +0000 (12:15 +0530)]
arm64: dts: qcom: sdm845-xiaomi-beryllium: fix typo in panel's vddio-supply property
[ Upstream commit
1f1c494082a1f10d03ce4ee1485ee96d212e22ff ]
vddio is misspelled with a "0" instead of "o". Fix it.
Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/BY5PR02MB7009901651E6A8D5ACB0425ED91F9@BY5PR02MB7009.namprd02.prod.outlook.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zixuan Fu [Mon, 11 Apr 2022 10:45:34 +0000 (18:45 +0800)]
fs: jfs: fix possible NULL pointer dereference in dbFree()
[ Upstream commit
0d4837fdb796f99369cf7691d33de1b856bcaf1f ]
In our fault-injection testing, the variable "nblocks" in dbFree() can be
zero when kmalloc_array() fails in dtSearch(). In this case, the variable
"mp" in dbFree() would be NULL and then it is dereferenced in
"write_metapage(mp)".
The failure log is listed as follows:
[ 13.824137] BUG: kernel NULL pointer dereference, address:
0000000000000020
...
[ 13.827416] RIP: 0010:dbFree+0x5f7/0x910 [jfs]
[ 13.834341] Call Trace:
[ 13.834540] <TASK>
[ 13.834713] txFreeMap+0x7b4/0xb10 [jfs]
[ 13.835038] txUpdateMap+0x311/0x650 [jfs]
[ 13.835375] jfs_lazycommit+0x5f2/0xc70 [jfs]
[ 13.835726] ? sched_dynamic_update+0x1b0/0x1b0
[ 13.836092] kthread+0x3c2/0x4a0
[ 13.836355] ? txLockFree+0x160/0x160 [jfs]
[ 13.836763] ? kthread_unuse_mm+0x160/0x160
[ 13.837106] ret_from_fork+0x1f/0x30
[ 13.837402] </TASK>
...
This patch adds a NULL check of "mp" before "write_metapage(mp)" is called.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Zixuan Fu <r33s3n6@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
QintaoShen [Thu, 24 Mar 2022 07:44:03 +0000 (15:44 +0800)]
soc: ti: ti_sci_pm_domains: Check for null return of devm_kcalloc
[ Upstream commit
ba56291e297d28aa6eb82c5c1964fae2d7594746 ]
The allocation funciton devm_kcalloc may fail and return a null pointer,
which would cause a null-pointer dereference later.
It might be better to check it and directly return -ENOMEM just like the
usage of devm_kcalloc in previous code.
Signed-off-by: QintaoShen <unSimple1993@163.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/1648107843-29077-1-git-send-email-unSimple1993@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gilad Ben-Yossef [Wed, 6 Apr 2022 08:11:39 +0000 (11:11 +0300)]
crypto: ccree - use fine grained DMA mapping dir
[ Upstream commit
a260436c98171cd825955a84a7f6e62bc8f4f00d ]
Use a fine grained specification of DMA mapping directions
in certain cases, allowing both a more optimized operation
as well as shushing out a harmless, though persky
dma-debug warning.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Brian Norris [Tue, 8 Mar 2022 19:08:59 +0000 (11:08 -0800)]
PM / devfreq: rk3399_dmc: Disable edev on remove()
[ Upstream commit
2fccf9e6050e0e3b8b4cd275d41daf7f7fa22804 ]
Otherwise we hit an unablanced enable-count when unbinding the DFI
device:
[ 1279.659119] ------------[ cut here ]------------
[ 1279.659179] WARNING: CPU: 2 PID: 5638 at drivers/devfreq/devfreq-event.c:360 devfreq_event_remove_edev+0x84/0x8c
...
[ 1279.659352] Hardware name: Google Kevin (DT)
[ 1279.659363] pstate:
80400005 (Nzcv daif +PAN -UAO -TCO BTYPE=--)
[ 1279.659371] pc : devfreq_event_remove_edev+0x84/0x8c
[ 1279.659380] lr : devm_devfreq_event_release+0x1c/0x28
...
[ 1279.659571] Call trace:
[ 1279.659582] devfreq_event_remove_edev+0x84/0x8c
[ 1279.659590] devm_devfreq_event_release+0x1c/0x28
[ 1279.659602] release_nodes+0x1cc/0x244
[ 1279.659611] devres_release_all+0x44/0x60
[ 1279.659621] device_release_driver_internal+0x11c/0x1ac
[ 1279.659629] device_driver_detach+0x20/0x2c
[ 1279.659641] unbind_store+0x7c/0xb0
[ 1279.659650] drv_attr_store+0x2c/0x40
[ 1279.659663] sysfs_kf_write+0x44/0x58
[ 1279.659672] kernfs_fop_write_iter+0xf4/0x190
[ 1279.659684] vfs_write+0x2b0/0x2e4
[ 1279.659693] ksys_write+0x80/0xec
[ 1279.659701] __arm64_sys_write+0x24/0x30
[ 1279.659714] el0_svc_common+0xf0/0x1d8
[ 1279.659724] do_el0_svc_compat+0x28/0x3c
[ 1279.659738] el0_svc_compat+0x10/0x1c
[ 1279.659746] el0_sync_compat_handler+0xa8/0xcc
[ 1279.659758] el0_sync_compat+0x188/0x1c0
[ 1279.659768] ---[ end trace
cec200e5094155b4 ]---
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Sat, 19 Mar 2022 17:46:43 +0000 (18:46 +0100)]
arm64: dts: qcom: msm8994: Fix BLSP[12]_DMA channels count
[ Upstream commit
1ae438d26b620979ed004d559c304d31c42173ae ]
MSM8994 actually features 24 DMA channels for each BLSP,
fix it!
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-14-konrad.dybcio@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Sat, 19 Mar 2022 17:46:38 +0000 (18:46 +0100)]
arm64: dts: qcom: msm8994: Fix the cont_splash_mem address
[ Upstream commit
049c46f31a726bf8d202ff1681661513447fac84 ]
The default memory map places cont_splash_mem at 3401000, which was
overlooked.. Fix it!
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-9-konrad.dybcio@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Sun, 27 Mar 2022 18:08:54 +0000 (11:08 -0700)]
ARM: dts: s5pv210: align DMA channels with dtschema
[ Upstream commit
9e916fb9bc3d16066286f19fc9c51d26a6aec6bd ]
dtschema expects DMA channels in specific order (tx, rx and tx-sec).
The order actually should not matter because dma-names is used however
let's make it aligned with dtschema to suppress warnings like:
i2s@
eee30000: dma-names: ['rx', 'tx', 'tx-sec'] is not valid under any of the given schemas
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Co-developed-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/CY4PR04MB056779A9C50DC95987C5272ACB1C9@CY4PR04MB0567.namprd04.prod.outlook.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Thu, 7 Apr 2022 19:30:22 +0000 (21:30 +0200)]
ARM: dts: socfpga: align interrupt controller node name with dtschema
[ Upstream commit
c9bdd50d2019f78bf4c1f6a79254c27771901023 ]
Fixes dtbs_check warnings like:
$nodename:0: 'intc@
fffed000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220317115705.450427-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Thu, 7 Apr 2022 19:29:59 +0000 (21:29 +0200)]
ARM: dts: ox820: align interrupt controller node name with dtschema
[ Upstream commit
fbcd5ad7a419ad40644a0bb8b4152bc660172d8a ]
Fixes dtbs_check warnings like:
gic@1000: $nodename:0: 'gic@1000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220317115705.450427-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Niels Dossche [Mon, 28 Feb 2022 19:51:44 +0000 (20:51 +0100)]
IB/rdmavt: add missing locks in rvt_ruc_loopback
[ Upstream commit
22cbc6c2681a0a4fe76150270426e763d52353a4 ]
The documentation of the function rvt_error_qp says both r_lock and
s_lock need to be held when calling that function.
It also asserts using lockdep that both of those locks are held.
rvt_error_qp is called form rvt_send_cq, which is called from
rvt_qp_complete_swqe, which is called from rvt_send_complete, which is
called from rvt_ruc_loopback in two places. Both of these places do not
hold r_lock. Fix this by acquiring a spin_lock of r_lock in both of
these places.
The r_lock acquiring cannot be added in rvt_qp_complete_swqe because
some of its other callers already have r_lock acquired.
Link: https://lore.kernel.org/r/20220228195144.71946-1-dossche.niels@gmail.com
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bodo Stroesser [Tue, 17 May 2022 19:29:13 +0000 (21:29 +0200)]
scsi: target: tcmu: Avoid holding XArray lock when calling lock_page
[ Upstream commit
325d5c5fb216674296f3902a8902b942da3adc5b ]
In tcmu_blocks_release(), lock_page() is called to prevent a race causing
possible data corruption. Since lock_page() might sleep, calling it while
holding XArray lock is a bug.
To fix this, replace the xas_for_each() call with xa_for_each_range().
Since the latter does its own handling of XArray locking, the xas_lock()
and xas_unlock() calls around the original loop are no longer necessary.
The switch to xa_for_each_range() slows down the loop slightly. This is
acceptable since tcmu_blocks_release() is not relevant for performance.
Link: https://lore.kernel.org/r/20220517192913.21405-1-bostroesser@gmail.com
Fixes:
bb9b9eb0ae2e ("scsi: target: tcmu: Fix possible data corruption")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bob Peterson [Fri, 11 Feb 2022 15:50:08 +0000 (10:50 -0500)]
gfs2: use i_lock spin_lock for inode qadata
[ Upstream commit
5fcff61eea9efd1f4b60e89d2d686b5feaea100f ]
Before this patch, functions gfs2_qa_get and _put used the i_rw_mutex to
prevent simultaneous access to its i_qadata. But i_rw_mutex is now used
for many other things, including iomap_begin and end, which causes a
conflict according to lockdep. We cannot just remove the lock since
simultaneous opens (gfs2_open -> gfs2_open_common -> gfs2_qa_get) can
then stomp on each others values for i_qadata.
This patch solves the conflict by using the i_lock spin_lock in the inode
to prevent simultaneous access.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonghong Song [Mon, 23 May 2022 15:20:44 +0000 (08:20 -0700)]
selftests/bpf: fix btf_dump/btf_dump due to recent clang change
[ Upstream commit
4050764cbaa25760aab40857f723393c07898474 ]
Latest llvm-project upstream had a change of behavior
related to qualifiers on function return type ([1]).
This caused selftests btf_dump/btf_dump failure.
The following example shows what changed.
$ cat t.c
typedef const char * const (* const (* const fn_ptr_arr2_t[5])())(char * (*)(int));
struct t {
int a;
fn_ptr_arr2_t l;
};
int foo(struct t *arg) {
return arg->a;
}
Compiled with latest upstream llvm15,
$ clang -O2 -g -target bpf -S -emit-llvm t.c
The related generated debuginfo IR looks like:
!16 = !DIDerivedType(tag: DW_TAG_typedef, name: "fn_ptr_arr2_t", file: !1, line: 1, baseType: !17)
!17 = !DICompositeType(tag: DW_TAG_array_type, baseType: !18, size: 320, elements: !32)
!18 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !19)
!19 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !20, size: 64)
!20 = !DISubroutineType(types: !21)
!21 = !{!22, null}
!22 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !23, size: 64)
!23 = !DISubroutineType(types: !24)
!24 = !{!25, !28}
!25 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !26, size: 64)
!26 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !27)
!27 = !DIBasicType(name: "char", size: 8, encoding: DW_ATE_signed_char)
You can see two intermediate const qualifier to pointer are dropped in debuginfo IR.
With llvm14, we have following debuginfo IR:
!16 = !DIDerivedType(tag: DW_TAG_typedef, name: "fn_ptr_arr2_t", file: !1, line: 1, baseType: !17)
!17 = !DICompositeType(tag: DW_TAG_array_type, baseType: !18, size: 320, elements: !34)
!18 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !19)
!19 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !20, size: 64)
!20 = !DISubroutineType(types: !21)
!21 = !{!22, null}
!22 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !23)
!23 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !24, size: 64)
!24 = !DISubroutineType(types: !25)
!25 = !{!26, !30}
!26 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !27)
!27 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !28, size: 64)
!28 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !29)
!29 = !DIBasicType(name: "char", size: 8, encoding: DW_ATE_signed_char)
All const qualifiers are preserved.
To adapt the selftest to both old and new llvm, this patch removed
the intermediate const qualifier in const-to-ptr types, to make the
test succeed again.
[1] https://reviews.llvm.org/D125919
Reported-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220523152044.3905809-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Tue, 26 Apr 2022 08:06:02 +0000 (10:06 +0200)]
char: tpm: cr50_i2c: Suppress duplicated error message in .remove()
[ Upstream commit
e0687fe958f763f1790f22ed5483025b7624e744 ]
Returning an error value in an i2c remove callback results in an error
message being emitted by the i2c core, but otherwise it doesn't make a
difference. The device goes away anyhow and the devm cleanups are
called.
As tpm_cr50_i2c_remove() emits an error message already and the
additional error message by the i2c core doesn't add any useful
information, change the return value to zero to suppress this error
message.
Note that if i2c_clientdata is NULL, there is something really fishy.
Assuming no memory corruption happened (then all bets are lost anyhow),
tpm_cr50_i2c_remove() is only called after tpm_cr50_i2c_probe() returned
successfully. So there was a tpm chip registered before and after
tpm_cr50_i2c_remove() its privdata is freed but the associated character
device isn't removed. If after that happened userspace accesses the
character device it's likely that the freed memory is accessed. For that
reason the warning message is made a bit more frightening.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jakub Kicinski [Fri, 20 May 2022 19:56:05 +0000 (12:56 -0700)]
eth: tg3: silence the GCC 12 array-bounds warning
[ Upstream commit
9dec850fd7c210a04b4707df8e6c95bfafdd6a4b ]
GCC 12 currently generates a rather inconsistent warning:
drivers/net/ethernet/broadcom/tg3.c:17795:51: warning: array subscript 5 is above array bounds of ‘struct tg3_napi[5]’ [-Warray-bounds]
17795 | struct tg3_napi *tnapi = &tp->napi[i];
| ~~~~~~~~^~~
i is guaranteed < tp->irq_max which in turn is either 1 or 5.
There are more loops like this one in the driver, but strangely
GCC 12 dislikes only this single one.
Silence this silliness for now.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Sat, 21 May 2022 07:45:55 +0000 (08:45 +0100)]
afs: Adjust ACK interpretation to try and cope with NAT
[ Upstream commit
adc9613ff66c26ebaff9814973181ac178beb90b ]
If a client's address changes, say if it is NAT'd, this can disrupt an in
progress operation. For most operations, this is not much of a problem,
but StoreData can be different as some servers modify the target file as
the data comes in, so if a store request is disrupted, the file can get
corrupted on the server.
The problem is that the server doesn't recognise packets that come after
the change of address as belonging to the original client and will bounce
them, either by sending an OUT_OF_SEQUENCE ACK to the apparent new call if
the packet number falls within the initial sequence number window of a call
or by sending an EXCEEDS_WINDOW ACK if it falls outside and then aborting
it. In both cases, firstPacket will be 1 and previousPacket will be 0 in
the ACK information.
Fix this by the following means:
(1) If a client call receives an EXCEEDS_WINDOW ACK with firstPacket as 1
and previousPacket as 0, assume this indicates that the server saw the
incoming packets from a different peer and thus as a different call.
Fail the call with error -ENETRESET.
(2) Also fail the call if a similar OUT_OF_SEQUENCE ACK occurs if the
first packet has been hard-ACK'd. If it hasn't been hard-ACK'd, the
ACK packet will cause it to get retransmitted, so the call will just
be repeated.
(3) Make afs_select_fileserver() treat -ENETRESET as a straight fail of
the operation.
(4) Prioritise the error code over things like -ECONNRESET as the server
did actually respond.
(5) Make writeback treat -ENETRESET as a retryable error and make it
redirty all the pages involved in a write so that the VM will retry.
Note that there is still a circumstance that I can't easily deal with: if
the operation is fully received and processed by the server, but the reply
is lost due to address change. There's no way to know if the op happened.
We can examine the server, but a conflicting change could have been made by
a third party - and we can't tell the difference. In such a case, a
message like:
kAFS: vnode modified {100058:146266} b7->b8 YFS.StoreData64 (op=2646a)
will be logged to dmesg on the next op to touch the file and the client
will reset the inode state, including invalidating clean parts of the
pagecache.
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2021-December/004811.html
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Sat, 21 May 2022 07:45:48 +0000 (08:45 +0100)]
rxrpc, afs: Fix selection of abort codes
[ Upstream commit
de696c4784f0706884458893c5a6c39b3a3ff65c ]
The RX_USER_ABORT code should really only be used to indicate that the user
of the rxrpc service (ie. userspace) implicitly caused a call to be aborted
- for instance if the AF_RXRPC socket is closed whilst the call was in
progress. (The user may also explicitly abort a call and specify the abort
code to use).
Change some of the points of generation to use other abort codes instead:
(1) Abort the call with RXGEN_SS_UNMARSHAL or RXGEN_CC_UNMARSHAL if we see
ENOMEM and EFAULT during received data delivery and abort with
RX_CALL_DEAD in the default case.
(2) Abort with RXGEN_SS_MARSHAL if we get ENOMEM whilst trying to send a
reply.
(3) Abort with RX_CALL_DEAD if we stop hearing from the peer if we had
heard from the peer and abort with RX_CALL_TIMEOUT if we hadn't.
(4) Abort with RX_CALL_DEAD if we try to disconnect a call that's not
completed successfully or been aborted.
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Sat, 21 May 2022 07:45:41 +0000 (08:45 +0100)]
rxrpc: Return an error to sendmsg if call failed
[ Upstream commit
4ba68c5192554876bd8c3afd904e3064d2915341 ]
If at the end of rxrpc sendmsg() or rxrpc_kernel_send_data() the call that
was being given data was aborted remotely or otherwise failed, return an
error rather than returning the amount of data buffered for transmission.
The call (presumably) did not complete, so there's not much point
continuing with it. AF_RXRPC considers it "complete" and so will be
unwilling to do anything else with it - and won't send a notification for
it, deeming the return from sendmsg sufficient.
Not returning an error causes afs to incorrectly handle a StoreData
operation that gets interrupted by a change of address due to NAT
reconfiguration.
This doesn't normally affect most operations since their request parameters
tend to fit into a single UDP packet and afs_make_call() returns before the
server responds; StoreData is different as it involves transmission of a
lot of data.
This can be triggered on a client by doing something like:
dd if=/dev/zero of=/afs/example.com/foo bs=1M count=512
at one prompt, and then changing the network address at another prompt,
e.g.:
ifconfig enp6s0 inet 192.168.6.2 && route add 192.168.6.1 dev enp6s0
Tracing packets on an Auristor fileserver looks something like:
192.168.6.1 -> 192.168.6.3 RX 107 ACK Idle Seq: 0 Call: 4 Source Port: 7000 Destination Port: 7001
192.168.6.3 -> 192.168.6.1 AFS (RX) 1482 FS Request: Unknown(64538) (64538)
192.168.6.3 -> 192.168.6.1 AFS (RX) 1482 FS Request: Unknown(64538) (64538)
192.168.6.1 -> 192.168.6.3 RX 107 ACK Idle Seq: 0 Call: 4 Source Port: 7000 Destination Port: 7001
<ARP exchange for 192.168.6.2>
192.168.6.2 -> 192.168.6.1 AFS (RX) 1482 FS Request: Unknown(0) (0)
192.168.6.2 -> 192.168.6.1 AFS (RX) 1482 FS Request: Unknown(0) (0)
192.168.6.1 -> 192.168.6.2 RX 107 ACK Exceeds Window Seq: 0 Call: 4 Source Port: 7000 Destination Port: 7001
192.168.6.1 -> 192.168.6.2 RX 74 ABORT Seq: 0 Call: 4 Source Port: 7000 Destination Port: 7001
192.168.6.1 -> 192.168.6.2 RX 74 ABORT Seq: 29321 Call: 4 Source Port: 7000 Destination Port: 7001
The Auristor fileserver logs code -453 (RXGEN_SS_UNMARSHAL), but the abort
code received by kafs is -5 (RX_PROTOCOL_ERROR) as the rx layer sees the
condition and generates an abort first and the unmarshal error is a
consequence of that at the application layer.
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2021-December/004810.html
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Fri, 20 May 2022 14:32:30 +0000 (16:32 +0200)]
m68k: atari: Make Atari ROM port I/O write macros return void
[ Upstream commit
30b5e6ef4a32ea4985b99200e06d6660a69f9246 ]
The macros implementing Atari ROM port I/O writes do not cast away their
output, unlike similar implementations for other I/O buses.
When they are combined using conditional expressions in the definitions of
outb() and friends, this triggers sparse warnings like:
drivers/net/appletalk/cops.c:382:17: error: incompatible types in conditional expression (different base types):
drivers/net/appletalk/cops.c:382:17: unsigned char
drivers/net/appletalk/cops.c:382:17: void
Fix this by adding casts to "void".
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/c15bedc83d90a14fffcd5b1b6bfb32b8a80282c5.1653057096.git.geert@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Elder [Thu, 19 May 2022 15:12:13 +0000 (10:12 -0500)]
net: ipa: ignore endianness if there is no header
[ Upstream commit
332ef7c814bdd60f08d0d9013d0e1104798b2d23 ]
If we program an RX endpoint to have no header (header length is 0),
header-related endpoint configuration values are meaningless and are
ignored.
The only case we support that defines a header is QMAP endpoints.
In ipa_endpoint_init_hdr_ext() we set the endianness mask value
unconditionally, but it should not be done if there is no header
(meaning it is not configured for QMAP).
Set the endianness conditionally, and rearrange the logic in that
function slightly to avoid testing the qmap flag twice.
Delete an incorrect comment in ipa_endpoint_init_aggr().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Borislav Petkov [Thu, 19 May 2022 14:59:13 +0000 (16:59 +0200)]
x86/microcode: Add explicit CPU vendor dependency
[ Upstream commit
9c55d99e099bd7aa6b91fce8718505c35d5dfc65 ]
Add an explicit dependency to the respective CPU vendor so that the
respective microcode support for it gets built only when that support is
enabled.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/8ead0da9-9545-b10d-e3db-7df1a1f219e4@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vincent Mailhol [Wed, 18 May 2022 11:43:57 +0000 (20:43 +0900)]
can: mcp251xfd: silence clang's -Wunaligned-access warning
[ Upstream commit
1a6dd9996699889313327be03981716a8337656b ]
clang emits a -Wunaligned-access warning on union
mcp251xfd_tx_ojb_load_buf.
The reason is that field hw_tx_obj (not declared as packed) is being
packed right after a 16 bits field inside a packed struct:
| union mcp251xfd_tx_obj_load_buf {
| struct __packed {
| struct mcp251xfd_buf_cmd cmd;
| /* ^ 16 bits fields */
| struct mcp251xfd_hw_tx_obj_raw hw_tx_obj;
| /* ^ not declared as packed */
| } nocrc;
| struct __packed {
| struct mcp251xfd_buf_cmd_crc cmd;
| struct mcp251xfd_hw_tx_obj_raw hw_tx_obj;
| __be16 crc;
| } crc;
| } ____cacheline_aligned;
Starting from LLVM 14, having an unpacked struct nested in a packed
struct triggers a warning. c.f. [1].
This is a false positive because the field is always being accessed
with the relevant put_unaligned_*() function. Adding __packed to the
structure declaration silences the warning.
[1] https://github.com/llvm/llvm-project/issues/55520
Link: https://lore.kernel.org/all/20220518114357.55452-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chaitanya Kulkarni [Wed, 18 May 2022 15:51:38 +0000 (08:51 -0700)]
nvme: set non-mdts limits in nvme_scan_work
[ Upstream commit
78288665b5d0154978fed431985310cb4f166836 ]
In current implementation we set the non-mdts limits by calling
nvme_init_non_mdts_limits() from nvme_init_ctrl_finish().
This also tries to set the limits for the discovery controller which
has no I/O queues resulting in the warning message reported by the
nvme_log_error() when running blktest nvme/002: -
[ 2005.155946] run blktests nvme/002 at 2022-04-09 16:57:47
[ 2005.192223] loop: module loaded
[ 2005.196429] nvmet: adding nsid 1 to subsystem blktests-subsystem-0
[ 2005.200334] nvmet: adding nsid 1 to subsystem blktests-subsystem-1
<------------------------------SNIP---------------------------------->
[ 2008.958108] nvmet: adding nsid 1 to subsystem blktests-subsystem-997
[ 2008.962082] nvmet: adding nsid 1 to subsystem blktests-subsystem-998
[ 2008.966102] nvmet: adding nsid 1 to subsystem blktests-subsystem-999
[ 2008.973132] nvmet: creating discovery controller 1 for subsystem nqn.2014-08.org.nvmexpress.discovery for NQN testhostnqn.
*[ 2008.973196] nvme1: Identify(0x6), Invalid Field in Command (sct 0x0 / sc 0x2) MORE DNR*
[ 2008.974595] nvme nvme1: new ctrl: "nqn.2014-08.org.nvmexpress.discovery"
[ 2009.103248] nvme nvme1: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"
Move the call of nvme_init_non_mdts_limits() to nvme_scan_work() after
we verify that I/O queues are created since that is a converging point
for each transport where these limits are actually used.
1. FC :
nvme_fc_create_association()
...
nvme_fc_create_io_queues(ctrl);
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
2. PCIe:-
nvme_reset_work()
...
nvme_setup_io_queues()
nvme_create_io_queues()
nvme_alloc_queue()
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
3. RDMA :-
nvme_rdma_setup_ctrl
...
nvme_rdma_configure_io_queues
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
4. TCP :-
nvme_tcp_setup_ctrl
...
nvme_tcp_configure_io_queues
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
* nvme_scan_work()
...
nvme_validate_or_alloc_ns()
nvme_alloc_ns()
nvme_update_ns_info()
nvme_update_disk_info()
nvme_config_discard() <---
blk_queue_max_write_zeroes_sectors() <---
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre Gondois [Wed, 18 May 2022 09:08:59 +0000 (11:08 +0200)]
ACPI: CPPC: Assume no transition latency if no PCCT
[ Upstream commit
6380b7b2b29da9d9c5ab2d4a265901cd93ba3696 ]
The transition_delay_us (struct cpufreq_policy) is currently defined
as:
Preferred average time interval between consecutive invocations of
the driver to set the frequency for this policy. To be set by the
scaling driver (0, which is the default, means no preference).
The transition_latency represents the amount of time necessary for a
CPU to change its frequency.
A PCCT table advertises mutliple values:
- pcc_nominal: Expected latency to process a command, in microseconds
- pcc_mpar: The maximum number of periodic requests that the subspace
channel can support, reported in commands per minute. 0 indicates no
limitation.
- pcc_mrtt: The minimum amount of time that OSPM must wait after the
completion of a command before issuing the next command,
in microseconds.
cppc_get_transition_latency() allows to get the max of them.
commit
d4f3388afd48 ("cpufreq / CPPC: Set platform specific
transition_delay_us") allows to select transition_delay_us based on
the platform, and fallbacks to cppc_get_transition_latency()
otherwise.
If _CPC objects are not using PCC channels (no PPCT table), the
transition_delay_us is set to CPUFREQ_ETERNAL, leading to really long
periods between frequency updates (~4s).
If the desired_reg, where performance requests are written, is in
SystemMemory or SystemIo ACPI address space, there is no delay
in requests. So return 0 instead of CPUFREQ_ETERNAL, leading to
transition_delay_us being set to LATENCY_MULTIPLIER us (1000 us).
This patch also adds two macros to check the address spaces.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Tue, 17 May 2022 17:26:47 +0000 (12:26 -0500)]
ASoC: rt1015p: remove dependency on GPIOLIB
[ Upstream commit
b390c25c6757b9d56cecdfbf6d55f15fc89a6386 ]
commit
dcc2c012c7691 ("ASoC: Fix gpiolib dependencies") removed a
series of unnecessary dependencies on GPIOLIB when the gpio was
optional.
A similar simplification seems valid for rt1015p, so remove the
dependency as well. This will avoid the following warning
WARNING: unmet direct dependencies detected for SND_SOC_RT1015P
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] &&
GPIOLIB [=n]
Selected by [y]:
- SND_SOC_INTEL_SOF_RT5682_MACH [=y] && SOUND [=y] && !UML && SND
[=y] && SND_SOC [=y] && SND_SOC_INTEL_MACH [=y] &&
(SND_SOC_SOF_HDA_LINK [=y] || SND_SOC_SOF_BAYTRAIL [=n]) && I2C
[=y] && ACPI [=y] && (SND_HDA_CODEC_HDMI [=y] &&
SND_SOC_SOF_HDA_AUDIO_CODEC [=y] && (MFD_INTEL_LPSS [=y] ||
COMPILE_TEST [=y]) || SND_SOC_SOF_BAYTRAIL [=n] &&
(X86_INTEL_LPSS [=n] || COMPILE_TEST [=y]))
Reported-by: kernel test robot <yujie.liu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220517172647.468244-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Tue, 17 May 2022 17:26:46 +0000 (12:26 -0500)]
ASoC: max98357a: remove dependency on GPIOLIB
[ Upstream commit
21ca3274333f5c1cbbf9d91e5b33f4f2463859b2 ]
commit
dcc2c012c7691 ("ASoC: Fix gpiolib dependencies") removed a
series of unnecessary dependencies on GPIOLIB when the gpio was
optional.
A similar simplification seems valid for max98357a, so remove the
dependency as well. This will avoid the following warning
WARNING: unmet direct dependencies detected for SND_SOC_MAX98357A
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
Selected by [y]:
- SND_SOC_INTEL_SOF_CS42L42_MACH [=y] && SOUND [=y] && !UML &&
SND [=y] && SND_SOC [=y] && SND_SOC_INTEL_MACH [=y] &&
(SND_SOC_SOF_HDA_LINK [=y] || SND_SOC_SOF_BAYTRAIL [=n]) && I2C
[=y] && ACPI [=y] && SND_HDA_CODEC_HDMI [=y] &&
SND_SOC_SOF_HDA_AUDIO_CODEC [=y] && (MFD_INTEL_LPSS [=y] ||
COMPILE_TEST [=n])
Reported-by: kernel test robot <yujie.liu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220517172647.468244-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicolas Dufresne [Fri, 13 May 2022 20:29:19 +0000 (22:29 +0200)]
media: hantro: Stop using H.264 parameter pic_num
[ Upstream commit
831410700909f4e29d5af1ef26b8c59fc2d1988e ]
The hardware expects FrameNumWrap or long_term_frame_idx. Picture
numbers are per field, and are mostly used during the memory
management process, which is done in userland. This fixes two
ITU conformance tests:
- MR6_BT_B
- MR8_BT_B
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>