vhost-vdpa: fix use after free in vhost_vdpa_probe()

[ Upstream commit e07754e0a1ea2d63fb29574253d1fd7405607343 ]

The put_device() calls vhost_vdpa_release_dev() which calls
ida_simple_remove() and frees "v".  So this call to
ida_simple_remove() is a use after free and a double free.

Fixes: ebe6a354fa7e ("vhost-vdpa: Call ida_simple_remove() when failed")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-Id: <cf53cb61-0699-4e36-a980-94fd4268ff00@moroto.mountain>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa_sim_blk: allocate the buffer zeroed

[ Upstream commit 0d82410252ea324f0064e75b9865bb74cccc1dda ]

Deleting and recreating a device can lead to having the same
content as the old device, so let's always allocate buffers
completely zeroed out.

Fixes: abebb16254b3 ("vdpa_sim_blk: support shared backend")
Suggested-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20231031144339.121453-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: split cache ops out of dma-noncoherent.c

[ Upstream commit 946bb33d330251966223f770f64885c79448b1a1 ]

The cache ops are also used by the pmem code which is unconditionally
built into the kernel.  Move them into a separate file that is built
based on the correct config option.

Fixes: fd962781270e ("riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> #
Link: https://lore.kernel.org/r/20231028155101.1039049-1-hch@lst.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/tc: Fix -Wformat-truncation in intel_tc_port_init

[ Upstream commit 9506fba463fcbdf8c8b7af3ec9ee34360df843fe ]

Fix below compiler warning:

intel_tc.c:1879:11: error: ‘%d’ directive output may be truncated
writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
"%c/TC#%d", port_name(port), tc_port + 1);
           ^~
intel_tc.c:1878:2: note: ‘snprintf’ output between 7 and 17 bytes
into a destination of size 8
  snprintf(tc->port_name, sizeof(tc->port_name),
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    "%c/TC#%d", port_name(port), tc_port + 1);
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

v2: use kasprintf(Imre)
v3: use const for port_name, and fix tc mem leak(Imre)

Fixes: 3eafcddf766b ("drm/i915/tc: Move TC port fields to a new intel_tc_port struct")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026125636.5080-1-nirmoy.das@intel.com
(cherry picked from commit 70a3cbbe620ee66afb0c066624196077767e61b2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Silence "suspicious RCU usage in gfs2_permission" warning

[ Upstream commit 074d7306a4fe22fcac0b53f699f92757ab1cee99 ]

Commit 0abd1557e21c added rcu_dereference() for dereferencing ip->i_gl
in gfs2_permission.  This now causes lockdep to complain when
gfs2_permission is called in non-RCU context:

    WARNING: suspicious RCU usage in gfs2_permission

Switch to rcu_dereference_check() and check for the MAY_NOT_BLOCK flag
to shut up lockdep when we know that dereferencing ip->i_gl is safe.

Fixes: 0abd1557e21c ("gfs2: fix an oops in gfs2_permission")
Reported-by: syzbot+3e5130844b0c0e2b4948@syzkaller.appspotmail.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: provide riscv-specific is_trap_insn()

[ Upstream commit b701f9e726f0a30a94ea6af596b74c1f07b95b6b ]

uprobes expects is_trap_insn() to return true for any trap instructions,
not just the one used for installing uprobe. The current default
implementation only returns true for 16-bit c.ebreak if C extension is
enabled. This can confuse uprobes if a 32-bit ebreak generates a trap
exception from userspace: uprobes asks is_trap_insn() who says there is no
trap, so uprobes assume a probe was there before but has been removed, and
return to the trap instruction. This causes an infinite loop of entering
and exiting trap handler.

Instead of using the default implementation, implement this function
speficially for riscv with checks for both ebreak and c.ebreak.

Fixes: 74784081aac8 ("riscv: Add uprobes supported")
Signed-off-by: Nam Cao <namcaov@gmail.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230829083614.117748-1-namcaov@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RISC-V: hwprobe: Fix vDSO SIGSEGV

[ Upstream commit e1c05b3bf80f829ced464bdca90f1dfa96e8d251 ]

A hwprobe pair key is signed, but the hwprobe vDSO function was
only checking that the upper bound was valid. In order to help
avoid this type of problem in the future, and in anticipation of
this check becoming more complicated with sparse keys, introduce
and use a "key is valid" predicate function for the check.

Fixes: aa5af0aa90ba ("RISC-V: Add hwprobe vDSO function and data")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20231010165101.14942-2-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix RPC client cleaned up the freed pipefs dentries

[ Upstream commit bfca5fb4e97c46503ddfc582335917b0cc228264 ]

RPC client pipefs dentries cleanup is in separated rpc_remove_pipedir()
workqueue,which takes care about pipefs superblock locking.
In some special scenarios, when kernel frees the pipefs sb of the
current client and immediately alloctes a new pipefs sb,
rpc_remove_pipedir function would misjudge the existence of pipefs
sb which is not the one it used to hold. As a result,
the rpc_remove_pipedir would clean the released freed pipefs dentries.

To fix this issue, rpc_remove_pipedir should check whether the
current pipefs sb is consistent with the original pipefs sb.

This error can be catched by KASAN:
=========================================================
[  250.497700] BUG: KASAN: slab-use-after-free in dget_parent+0x195/0x200
[  250.498315] Read of size 4 at addr ffff88800a2ab804 by task kworker/0:18/106503
[  250.500549] Workqueue: events rpc_free_client_work
[  250.501001] Call Trace:
[  250.502880]  kasan_report+0xb6/0xf0
[  250.503209]  ? dget_parent+0x195/0x200
[  250.503561]  dget_parent+0x195/0x200
[  250.503897]  ? __pfx_rpc_clntdir_depopulate+0x10/0x10
[  250.504384]  rpc_rmdir_depopulate+0x1b/0x90
[  250.504781]  rpc_remove_client_dir+0xf5/0x150
[  250.505195]  rpc_free_client_work+0xe4/0x230
[  250.505598]  process_one_work+0x8ee/0x13b0
...
[   22.039056] Allocated by task 244:
[   22.039390]  kasan_save_stack+0x22/0x50
[   22.039758]  kasan_set_track+0x25/0x30
[   22.040109]  __kasan_slab_alloc+0x59/0x70
[   22.040487]  kmem_cache_alloc_lru+0xf0/0x240
[   22.040889]  __d_alloc+0x31/0x8e0
[   22.041207]  d_alloc+0x44/0x1f0
[   22.041514]  __rpc_lookup_create_exclusive+0x11c/0x140
[   22.041987]  rpc_mkdir_populate.constprop.0+0x5f/0x110
[   22.042459]  rpc_create_client_dir+0x34/0x150
[   22.042874]  rpc_setup_pipedir_sb+0x102/0x1c0
[   22.043284]  rpc_client_register+0x136/0x4e0
[   22.043689]  rpc_new_client+0x911/0x1020
[   22.044057]  rpc_create_xprt+0xcb/0x370
[   22.044417]  rpc_create+0x36b/0x6c0
...
[   22.049524] Freed by task 0:
[   22.049803]  kasan_save_stack+0x22/0x50
[   22.050165]  kasan_set_track+0x25/0x30
[   22.050520]  kasan_save_free_info+0x2b/0x50
[   22.050921]  __kasan_slab_free+0x10e/0x1a0
[   22.051306]  kmem_cache_free+0xa5/0x390
[   22.051667]  rcu_core+0x62c/0x1930
[   22.051995]  __do_softirq+0x165/0x52a
[   22.052347]
[   22.052503] Last potentially related work creation:
[   22.052952]  kasan_save_stack+0x22/0x50
[   22.053313]  __kasan_record_aux_stack+0x8e/0xa0
[   22.053739]  __call_rcu_common.constprop.0+0x6b/0x8b0
[   22.054209]  dentry_free+0xb2/0x140
[   22.054540]  __dentry_kill+0x3be/0x540
[   22.054900]  shrink_dentry_list+0x199/0x510
[   22.055293]  shrink_dcache_parent+0x190/0x240
[   22.055703]  do_one_tree+0x11/0x40
[   22.056028]  shrink_dcache_for_umount+0x61/0x140
[   22.056461]  generic_shutdown_super+0x70/0x590
[   22.056879]  kill_anon_super+0x3a/0x60
[   22.057234]  rpc_kill_sb+0x121/0x200

Fixes: 0157d021d23a ("SUNRPC: handle RPC client pipefs dentries by network namespace aware routines")
Signed-off-by: felix <fuzhen5@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.1: fix SP4_MACH_CRED protection for pnfs IO

[ Upstream commit 5cc7688bae7f0757c39c1d3dfdd827b724061067 ]

If the client is doing pnfs IO and Kerberos is configured and EXCHANGEID
successfully negotiated SP4_MACH_CRED and WRITE/COMMIT are on the
list of state protected operations, then we need to make sure to
choose the DS's rpc_client structure instead of the MDS's one.

Fixes: fb91fb0ee7b2 ("NFS: Move call to nfs4_state_protect_write() to nfs4_write_setup()")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Add an IS_ERR() check back to where it was

[ Upstream commit 4f3ed837186fc0d2722ba8d2457a594322e9c2ef ]

This IS_ERR() check was deleted during in a cleanup because, at the time,
the rpcb_call_async() function could not return an error pointer.  That
changed in commit 25cf32ad5dba ("SUNRPC: Handle allocation failure in
rpc_new_task()") and now it can return an error pointer.  Put the check
back.

A related revert was done in commit 13bd90141804 ("Revert "SUNRPC:
Remove unreachable error condition"").

Fixes: 037e910b52b0 ("SUNRPC: Remove unreachable error condition in rpcb_getport_async()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.1: fix handling NFS4ERR_DELAY when testing for session trunking

[ Upstream commit 6bd1a77dc72dea0b0d8b6014f231143984d18f6d ]

Currently when client sends an EXCHANGE_ID for a possible trunked
connection, for any error that happened, the trunk will be thrown
out. However, an NFS4ERR_DELAY is a transient error that should be
retried instead.

Fixes: e818bd085baf ("NFSv4.1 remove xprt from xprt_switch if session trunking test fails")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/mtl: avoid stringop-overflow warning

[ Upstream commit 390001d648ffa027b750b7dceb5d43f4c1d1a39e ]

The newly added memset() causes a warning for some reason I could not
figure out:

In file included from arch/x86/include/asm/string.h:3,
                 from drivers/gpu/drm/i915/gt/intel_rc6.c:6:
In function 'rc6_res_reg_init',
    inlined from 'intel_rc6_init' at drivers/gpu/drm/i915/gt/intel_rc6.c:610:2:
arch/x86/include/asm/string_32.h:195:29: error: '__builtin_memset' writing 16 bytes into a region of size 0 overflows the destination [-Werror=stringop-overflow=]
  195 | #define memset(s, c, count) __builtin_memset(s, c, count)
      |                             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_rc6.c:584:9: note: in expansion of macro 'memset'
  584 |         memset(rc6->res_reg, INVALID_MMIO_REG.reg, sizeof(rc6->res_reg));
      |         ^~~~~~
In function 'intel_rc6_init':

Change it to an normal initializer and an added memcpy() that does not have
this problem.

Fixes: 4bb9ca7ee074 ("drm/i915/mtl: C6 residency and C state type for MTL SAMedia")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016201012.1022812-1-arnd@kernel.org
(cherry picked from commit 0520b30b219053cd789909bca45b3c486ef3ee09)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: meson: check return value of devm_kasprintf()

[ Upstream commit 5a985960a4dd041c21dbe9956958c1633d2da706 ]

devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful by
checking the pointer validity.

Fixes: 1e4d3ba66888 ("mtd: rawnand: meson: fix the clock")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231019065548.318443-1-yiyang13@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: intel: check return value of devm_kasprintf()

[ Upstream commit 74ac5b5e2375f1e8ef797ac7770887e9969f2516 ]

devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful by
checking the pointer validity.

Fixes: 0b1039f016e8 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231019065537.318391-1-yiyang13@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: ECONNRESET might require a rebind

[ Upstream commit 4b09ca1508a60be30b2e3940264e93d7aeb5c97e ]

If connect() is returning ECONNRESET, it usually means that nothing is
listening on that port. If so, a rebind might be required in order to
obtain the new port on which the RPC service is listening.

Fixes: fd01b2597941 ("SUNRPC: ECONNREFUSED should cause a rebind.")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: serial: fix regex pattern for matching serial node children

[ Upstream commit 42851dfd4dbe38e34724a00063a9fad5cfc48dcd ]

The regular expression pattern for matching serial node children should
accept only nodes starting and ending with the set of words: bluetooth,
gnss, gps or mcu.  Add missing brackets to enforce such matching.

Fixes: 0c559bc8abfb ("dt-bindings: serial: restrict possible child node names")
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Closes: https://lore.kernel.org/all/20231004170021.36b32465@aktux/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231005093247.128166-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples/bpf: syscall_tp_user: Fix array out-of-bound access

[ Upstream commit 9220c3ef6fefbf18f24aeedb1142a642b3de0596 ]

Commit 06744f24696e ("samples/bpf: Add openat2() enter/exit tracepoint
to syscall_tp sample") added two more eBPF programs to support the
openat2() syscall. However, it did not increase the size of the array
that holds the corresponding bpf_links. This leads to an out-of-bound
access on that array in the bpf_object__for_each_program loop and could
corrupt other variables on the stack. On our testing QEMU, it corrupts
the map1_fds array and causes the sample to fail:

  # ./syscall_tp
  prog #0: map ids 4 5
  verify map:4 val: 5
  map_lookup failed: Bad file descriptor

Dynamically allocate the array based on the number of programs reported
by libbpf to prevent similar inconsistencies in the future

Fixes: 06744f24696e ("samples/bpf: Add openat2() enter/exit tracepoint to syscall_tp sample")
Signed-off-by: Jinghao Jia <jinghao@linux.ibm.com>
Signed-off-by: Ruowen Qin <ruowenq2@illinois.edu>
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Link: https://lore.kernel.org/r/20230917214220.637721-4-jinghao7@illinois.edu
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples/bpf: syscall_tp_user: Rename num_progs into nr_tests

[ Upstream commit 0ee352fe0d28015cab161b04d202fa3231c0ba3b ]

The variable name num_progs causes confusion because that variable
really controls the number of rounds the test should be executed.

Rename num_progs into nr_tests for the sake of clarity.

Signed-off-by: Jinghao Jia <jinghao@linux.ibm.com>
Signed-off-by: Ruowen Qin <ruowenq2@illinois.edu>
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Link: https://lore.kernel.org/r/20230917214220.637721-3-jinghao7@illinois.edu
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 9220c3ef6fef ("samples/bpf: syscall_tp_user: Fix array out-of-bound access")
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/core: Optimize in_task() and in_interrupt() a bit

[ Upstream commit 87c3a5893e865739ce78aa7192d36011022e0af7 ]

Except on x86, preempt_count is always accessed with READ_ONCE().
Repeated invocations in macros like irq_count() produce repeated loads.
These redundant instructions appear in various fast paths. In the one
shown below, for example, irq_count() is evaluated during kernel entry
if !tick_nohz_full_cpu(smp_processor_id()).

0001ed0a <irq_enter_rcu>:
   1ed0a:       4e56 0000       linkw %fp,#0
   1ed0e:       200f            movel %sp,%d0
   1ed10:       0280 ffff e000  andil #-8192,%d0
   1ed16:       2040            moveal %d0,%a0
   1ed18:       2028 0008       movel %a0@(8),%d0
   1ed1c:       0680 0001 0000  addil #65536,%d0
   1ed22:       2140 0008       movel %d0,%a0@(8)
   1ed26:       082a 0001 000f  btst #1,%a2@(15)
   1ed2c:       670c            beqs 1ed3a <irq_enter_rcu+0x30>
   1ed2e:       2028 0008       movel %a0@(8),%d0
   1ed32:       2028 0008       movel %a0@(8),%d0
   1ed36:       2028 0008       movel %a0@(8),%d0
   1ed3a:       4e5e            unlk %fp
   1ed3c:       4e75            rts

This patch doesn't prevent the pointless btst and beqs instructions
above, but it does eliminate 2 of the 3 pointless move instructions
here and elsewhere.

On x86, preempt_count is per-cpu data and the problem does not arise
presumably because the compiler is free to optimize more effectively.

This patch was tested on m68k and x86. I was expecting no changes
to object code for x86 and mostly that's what I saw. However, there
were a few places where code generation was perturbed for some reason.

The performance issue addressed here is minor on uniprocessor m68k. I
got a 0.01% improvement from this patch for a simple "find /sys -false"
benchmark. For architectures and workloads susceptible to cache line bounce
the improvement is expected to be larger. The only SMP architecture I have
is x86, and as x86 unaffected I have not done any further measurements.

Fixes: 15115830c887 ("preempt: Cleanup the macro maze a bit")
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/0a403120a682a525e6db2d81d1a3ffcc137c3742.1694756831.git.fthain@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: Use FW rate for non-data frames

[ Upstream commit 499d02790495958506a64f37ceda7e97345a50a8 ]

Currently we are setting the rate in the tx cmd for
mgmt frames (e.g. during connection establishment).
This was problematic when sending mgmt frames in eSR mode,
as we don't know what link this frame will be sent on
(This is decided by the FW), so we don't know what is the
lowest rate.
Fix this by not setting the rate in tx cmd and rely
on FW to choose the right one.
Set rate only for injected frames with fixed rate,
or when no sta is given.
Also set for important frames (EAPOL etc.) the High Priority flag.

Fixes: 055b22e770dd ("iwlwifi: mvm: Set Tx rate and flags when there is not station")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230913145231.6c7e59620ee0.I6eaed3ccdd6dd62b9e664facc484081fc5275843@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: tegra: add missing check for platform_get_irq()

[ Upstream commit 0a1166c27d4e53186e6bf9147ea6db9cd1d65847 ]

Add the missing check for platform_get_irq() and return error code
if it fails.

Fixes: d7d9f8ec77fe ("mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230821084046.217025-1-yiyang13@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: Fix double shift bug

[ Upstream commit d27abbfd4888d79dd24baf50e774631046ac4732 ]

These enums are passed to set/test_bit().  The set/test_bit() functions
take a bit number instead of a shifted value.  Passing a shifted value
is a double shift bug like doing BIT(BIT(1)).  The double shift bug
doesn't cause a problem here because we are only checking 0 and 1 but
if the value was 5 or above then it can lead to a buffer overflow.

Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix software pci_unplug on some chips

[ Upstream commit 4638e0c29a3f2294d5de0d052a4b8c9f33ccb957 ]

When software 'pci unplug' using IGT is executed we got a sysfs directory
entry is NULL for differant ras blocks like hdp, umc, etc.
Before call 'sysfs_remove_file_from_group' and 'sysfs_remove_group'
check that 'sd' is  not NULL.

[  +0.000001] RIP: 0010:sysfs_remove_group+0x83/0x90
[  +0.000002] Code: 31 c0 31 d2 31 f6 31 ff e9 9a a8 b4 00 4c 89 e7 e8 f2 a2 ff ff eb c2 49 8b 55 00 48 8b 33 48 c7 c7 80 65 94 82 e8 cd 82 bb ff <0f> 0b eb cc 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90
[  +0.000001] RSP: 0018:ffffc90002067c90 EFLAGS: 00010246
[  +0.000002] RAX: 0000000000000000 RBX: ffffffff824ea180 RCX: 0000000000000000
[  +0.000001] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[  +0.000001] RBP: ffffc90002067ca8 R08: 0000000000000000 R09: 0000000000000000
[  +0.000001] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[  +0.000001] R13: ffff88810a395f48 R14: ffff888101aab0d0 R15: 0000000000000000
[  +0.000001] FS:  00007f5ddaa43a00(0000) GS:ffff88841e800000(0000) knlGS:0000000000000000
[  +0.000002] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  +0.000001] CR2: 00007f8ffa61ba50 CR3: 0000000106432000 CR4: 0000000000350ef0
[  +0.000001] Call Trace:
[  +0.000001]  <TASK>
[  +0.000001]  ? show_regs+0x72/0x90
[  +0.000002]  ? sysfs_remove_group+0x83/0x90
[  +0.000002]  ? __warn+0x8d/0x160
[  +0.000001]  ? sysfs_remove_group+0x83/0x90
[  +0.000001]  ? report_bug+0x1bb/0x1d0
[  +0.000003]  ? handle_bug+0x46/0x90
[  +0.000001]  ? exc_invalid_op+0x19/0x80
[  +0.000002]  ? asm_exc_invalid_op+0x1b/0x20
[  +0.000003]  ? sysfs_remove_group+0x83/0x90
[  +0.000001]  dpm_sysfs_remove+0x61/0x70
[  +0.000002]  device_del+0xa3/0x3d0
[  +0.000002]  ? ktime_get_mono_fast_ns+0x46/0xb0
[  +0.000002]  device_unregister+0x18/0x70
[  +0.000001]  i2c_del_adapter+0x26d/0x330
[  +0.000002]  arcturus_i2c_control_fini+0x25/0x50 [amdgpu]
[  +0.000236]  smu_sw_fini+0x38/0x260 [amdgpu]
[  +0.000241]  amdgpu_device_fini_sw+0x116/0x670 [amdgpu]
[  +0.000186]  ? mutex_lock+0x13/0x50
[  +0.000003]  amdgpu_driver_release_kms+0x16/0x40 [amdgpu]
[  +0.000192]  drm_minor_release+0x4f/0x80 [drm]
[  +0.000025]  drm_release+0xfe/0x150 [drm]
[  +0.000027]  __fput+0x9f/0x290
[  +0.000002]  ____fput+0xe/0x20
[  +0.000002]  task_work_run+0x61/0xa0
[  +0.000002]  exit_to_user_mode_prepare+0x150/0x170
[  +0.000002]  syscall_exit_to_user_mode+0x2a/0x50

Cc: Hawking Zhang <hawking.zhang@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek: Add quirk for ASUS UX7602ZM

[ Upstream commit 26fd31ef9c02a5e91cdb8eea127b056bd7cf0b3b ]

Enables the SPI-connected CSC35L41 audio amplifier for this
laptop model.

As of BIOS version 303 it's still necessary to
modify the ACPI table to add the related _DSD properties:
https://github.com/alex-spataru/asus_zenbook_ux7602zm_sound/

Signed-off-by: Alex Spataru <alex_spataru@outlook.com>
Link: https://lore.kernel.org/r/DS7PR07MB7621BB5BB14F5473D181624CE3A4A@DS7PR07MB7621.namprd07.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/qxl: prevent memory leak

[ Upstream commit 0e8b9f258baed25f1c5672613699247c76b007b5 ]

The allocated memory for qdev->dumb_heads should be released
in qxl_destroy_monitors_object before qxl suspend.
otherwise,qxl_create_monitors_object will be called to
reallocate memory for qdev->dumb_heads after qxl resume,
it will cause memory leak.

Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn>
Link: https://lore.kernel.org/r/20230801025309.4049813-1-zhouzongmin@kylinos.cn
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings

[ Upstream commit fbb74e56378d8306f214658e3d525a8b3f000c5a ]

We need to check for an active device as otherwise we get warnings
for some mcbsp instances for "Runtime PM usage count underflow!".

Reported-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231030052340.13415-1-tony@atomide.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: dev: copy userspace array safely

[ Upstream commit cc9c54232f04aef3a5d7f64a0ece7df00f1aaa3d ]

i2c-dev.c utilizes memdup_user() to copy a userspace array. This is done
without an overflow check.

Use the new wrapper memdup_array_user() to copy the array more safely.

Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: VMAP_STACK overflow detection thread-safe

[ Upstream commit be97d0db5f44c0674480cb79ac6f5b0529b84c76 ]

commit 31da94c25aea ("riscv: add VMAP_STACK overflow detection") added
support for CONFIG_VMAP_STACK. If overflow is detected, CPU switches to
`shadow_stack` temporarily before switching finally to per-cpu
`overflow_stack`.

If two CPUs/harts are racing and end up in over flowing kernel stack, one
or both will end up corrupting each other state because `shadow_stack` is
not per-cpu. This patch optimizes per-cpu overflow stack switch by
directly picking per-cpu `overflow_stack` and gets rid of `shadow_stack`.

Following are the changes in this patch

 - Defines an asm macro to obtain per-cpu symbols in destination
   register.
 - In entry.S, when overflow is detected, per-cpu overflow stack is
   located using per-cpu asm macro. Computing per-cpu symbol requires
   a temporary register. x31 is saved away into CSR_SCRATCH
   (CSR_SCRATCH is anyways zero since we're in kernel).

Please see Links for additional relevant disccussion and alternative
solution.

Tested by `echo EXHAUST_STACK > /sys/kernel/debug/provoke-crash/DIRECT`
Kernel crash log below

 Insufficient stack space to handle exception!/debug/provoke-crash/DIRECT
 Task stack:     [0xff20000010a98000..0xff20000010a9c000]
 Overflow stack: [0xff600001f7d98370..0xff600001f7d99370]
 CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34
 Hardware name: riscv-virtio,qemu (DT)
 epc : __memset+0x60/0xfc
  ra : recursive_loop+0x48/0xc6 [lkdtm]
 epc : ffffffff808de0e4 ra : ffffffff0163a752 sp : ff20000010a97e80
  gp : ffffffff815c0330 tp : ff600000820ea280 t0 : ff20000010a97e88
  t1 : 000000000000002e t2 : 3233206874706564 s0 : ff20000010a982b0
  s1 : 0000000000000012 a0 : ff20000010a97e88 a1 : 0000000000000000
  a2 : 0000000000000400 a3 : ff20000010a98288 a4 : 0000000000000000
  a5 : 0000000000000000 a6 : fffffffffffe43f0 a7 : 00007fffffffffff
  s2 : ff20000010a97e88 s3 : ffffffff01644680 s4 : ff20000010a9be90
  s5 : ff600000842ba6c0 s6 : 00aaaaaac29e42b0 s7 : 00fffffff0aa3684
  s8 : 00aaaaaac2978040 s9 : 0000000000000065 s10: 00ffffff8a7cad10
  s11: 00ffffff8a76a4e0 t3 : ffffffff815dbaf4 t4 : ffffffff815dbaf4
  t5 : ffffffff815dbab8 t6 : ff20000010a9bb48
 status: 0000000200000120 badaddr: ff20000010a97e88 cause: 000000000000000f
 Kernel panic - not syncing: Kernel stack overflow
 CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34
 Hardware name: riscv-virtio,qemu (DT)
 Call Trace:
 [<ffffffff80006754>] dump_backtrace+0x30/0x38
 [<ffffffff808de798>] show_stack+0x40/0x4c
 [<ffffffff808ea2a8>] dump_stack_lvl+0x44/0x5c
 [<ffffffff808ea2d8>] dump_stack+0x18/0x20
 [<ffffffff808dec06>] panic+0x126/0x2fe
 [<ffffffff800065ea>] walk_stackframe+0x0/0xf0
 [<ffffffff0163a752>] recursive_loop+0x48/0xc6 [lkdtm]
 SMP: stopping secondary CPUs
 ---[ end Kernel panic - not syncing: Kernel stack overflow ]---

Cc: Guo Ren <guoren@kernel.org>
Cc: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/linux-riscv/Y347B0x4VUNOd6V7@xhacker/T/#t
Link: https://lore.kernel.org/lkml/20221124094845.1907443-1-debug@rivosinc.com/
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Guo Ren <guoren@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230927224757.1154247-9-samitolvanen@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kgdb: Flush console before entering kgdb on panic

[ Upstream commit dd712d3d45807db9fcae28a522deee85c1f2fde6 ]

When entering kdb/kgdb on a kernel panic, it was be observed that the
console isn't flushed before the `kdb` prompt came up. Specifically,
when using the buddy lockup detector on arm64 and running:
  echo HARDLOCKUP > /sys/kernel/debug/provoke-crash/DIRECT

I could see:
  [   26.161099] lkdtm: Performing direct entry HARDLOCKUP
  [   32.499881] watchdog: Watchdog detected hard LOCKUP on cpu 6
  [   32.552865] Sending NMI from CPU 5 to CPUs 6:
  [   32.557359] NMI backtrace for cpu 6
  ... [backtrace for cpu 6] ...
  [   32.558353] NMI backtrace for cpu 5
  ... [backtrace for cpu 5] ...
  [   32.867471] Sending NMI from CPU 5 to CPUs 0-4,7:
  [   32.872321] NMI backtrace forP cpuANC: Hard LOCKUP

  Entering kdb (current=..., pid 0) on processor 5 due to Keyboard Entry
  [5]kdb>

As you can see, backtraces for the other CPUs start printing and get
interleaved with the kdb PANIC print.

Let's replicate the commands to flush the console in the kdb panic
entry point to avoid this.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230822131945.1.I5b460ae8f954e4c4f628a373d6e74713c06dd26f@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Fix slab-use-after-free in gfs2_qd_dealloc

[ Upstream commit bdcb8aa434c6d36b5c215d02a9ef07551be25a37 ]

In gfs2_put_super(), whether withdrawn or not, the quota should
be cleaned up by gfs2_quota_cleanup().

Otherwise, struct gfs2_sbd will be freed before gfs2_qd_dealloc (rcu
callback) has run for all gfs2_quota_data objects, resulting in
use-after-free.

Also, gfs2_destroy_threads() and gfs2_quota_cleanup() is already called
by gfs2_make_fs_ro(), so in gfs2_put_super(), after calling
gfs2_make_fs_ro(), there is no need to call them again.

Reported-by: syzbot+29c47e9e51895928698c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=29c47e9e51895928698c
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Avoid NULL dereference of timing generator

[ Upstream commit b1904ed480cee3f9f4036ea0e36d139cb5fee2d6 ]

[Why & How]
Check whether assigned timing generator is NULL or not before
accessing its funcs to prevent NULL dereference.

Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imon: fix access to invalid resource for the second interface

[ Upstream commit a1766a4fd83befa0b34d932d532e7ebb7fab1fa7 ]

imon driver probes two USB interfaces, and at the probe of the second
interface, the driver assumes blindly that the first interface got
bound with the same imon driver.  It's usually true, but it's still
possible that the first interface is bound with another driver via a
malformed descriptor.  Then it may lead to a memory corruption, as
spotted by syzkaller; imon driver accesses the data from drvdata as
struct imon_context object although it's a completely different one
that was assigned by another driver.

This patch adds a sanity check -- whether the first interface is
really bound with the imon driver or not -- for avoiding the problem
above at the probe time.

Reported-by: syzbot+59875ffef5cb9c9b29e9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000a838aa0603cc74d6@google.com/
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20230922005152.163640-1-ricardo@marliere.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ccs: Fix driver quirk struct documentation

[ Upstream commit 441b5c63d71ec9ec5453328f7e83384ecc1dddd9 ]

Fix documentation for struct ccs_quirk, a device specific struct for
managing deviations from the standard. The flags field was drifted away
from where it should have been.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cobalt: Use FIELD_GET() to extract Link Width

[ Upstream commit f301fedbeecfdce91cb898d6fa5e62f269801fee ]

Use FIELD_GET() to extract PCIe Negotiated and Maximum Link Width fields
instead of custom masking and shifting.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: fix an oops in gfs2_permission

[ Upstream commit 0abd1557e21c617bd13fc18f7725fc6363c05913 ]

In RCU mode, we might race with gfs2_evict_inode(), which zeroes
->i_gl.  Freeing of the object it points to is RCU-delayed, so
if we manage to fetch the pointer before it's been replaced with
NULL, we are fine.  Check if we'd fetched NULL and treat that
as "bail out and tell the caller to get out of RCU mode".

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: ignore negated quota changes

[ Upstream commit 4c6a08125f2249531ec01783a5f4317d7342add5 ]

When lots of quota changes are made, there may be cases in which an
inode's quota information is increased and then decreased, such as when
blocks are added to a file, then deleted from it. If the timing is
right, function do_qc can add pending quota changes to a transaction,
then later, another call to do_qc can negate those changes, resulting
in a net gain of 0. The quota_change information is recorded in the qc
buffer (and qd element of the inode as well). The buffer is added to the
transaction by the first call to do_qc, but a subsequent call changes
the value from non-zero back to zero. At that point it's too late to
remove the buffer_head from the transaction. Later, when the quota sync
code is called, the zero-change qd element is discovered and flagged as
an assert warning. If the fs is mounted with errors=panic, the kernel
will panic.

This is usually seen when files are truncated and the quota changes are
negated by punch_hole/truncate which uses gfs2_quota_hold and
gfs2_quota_unhold rather than block allocations that use gfs2_quota_lock
and gfs2_quota_unlock which automatically do quota sync.

This patch solves the problem by adding a check to qd_check_sync such
that net-zero quota changes already added to the transaction are no
longer deemed necessary to be synced, and skipped.

In this case references are taken for the qd and the slot from do_qc
so those need to be put. The normal sequence of events for a normal
non-zero quota change is as follows:

gfs2_quota_change
   do_qc
      qd_hold
      slot_hold

Later, when the changes are to be synced:

gfs2_quota_sync
   qd_fish
      qd_check_sync
         gets qd ref via lockref_get_not_dead
   do_sync
      do_qc(QC_SYNC)
         qd_put
    lockref_put_or_lock
   qd_unlock
      qd_put
         lockref_put_or_lock

In the net-zero change case, we add a check to qd_check_sync so it puts
the qd and slot references acquired in gfs2_quota_change and skip the
unneeded sync.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ipu-bridge: increase sensor_name size

[ Upstream commit 83d0d4cc1423194b580356966107379490edd02e ]

Fixes this compiler warning:

In file included from include/linux/property.h:14,
                 from include/linux/acpi.h:16,
                 from drivers/media/pci/intel/ipu-bridge.c:4:
In function 'ipu_bridge_init_swnode_names',
    inlined from 'ipu_bridge_create_connection_swnodes' at drivers/media/pci/intel/ipu-bridge.c:445:2,
    inlined from 'ipu_bridge_connect_sensor' at drivers/media/pci/intel/ipu-bridge.c:656:3:
include/linux/fwnode.h:81:49: warning: '%u' directive output may be truncated writing between 1 and 3 bytes into a region of size 2 [-Wformat-truncation=]
   81 | #define SWNODE_GRAPH_PORT_NAME_FMT              "port@%u"
      |                                                 ^~~~~~~~~
drivers/media/pci/intel/ipu-bridge.c:384:18: note: in expansion of macro 'SWNODE_GRAPH_PORT_NAME_FMT'
  384 |                  SWNODE_GRAPH_PORT_NAME_FMT, sensor->link);
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/fwnode.h: In function 'ipu_bridge_connect_sensor':
include/linux/fwnode.h:81:55: note: format string is defined here
   81 | #define SWNODE_GRAPH_PORT_NAME_FMT              "port@%u"
      |                                                       ^~
In function 'ipu_bridge_init_swnode_names',
    inlined from 'ipu_bridge_create_connection_swnodes' at drivers/media/pci/intel/ipu-bridge.c:445:2,
    inlined from 'ipu_bridge_connect_sensor' at drivers/media/pci/intel/ipu-bridge.c:656:3:
include/linux/fwnode.h:81:49: note: directive argument in the range [0, 255]
   81 | #define SWNODE_GRAPH_PORT_NAME_FMT              "port@%u"
      |                                                 ^~~~~~~~~
drivers/media/pci/intel/ipu-bridge.c:384:18: note: in expansion of macro 'SWNODE_GRAPH_PORT_NAME_FMT'
  384 |                  SWNODE_GRAPH_PORT_NAME_FMT, sensor->link);
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/pci/intel/ipu-bridge.c:382:9: note: 'snprintf' output between 7 and 9 bytes into a destination of size 7
  382 |         snprintf(sensor->node_names.remote_port,
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  383 |                  sizeof(sensor->node_names.remote_port),
      |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  384 |                  SWNODE_GRAPH_PORT_NAME_FMT, sensor->link);
      |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vivid: avoid integer overflow

[ Upstream commit 4567ebf8e8f9546b373e78e3b7d584cc30b62028 ]

Fixes these compiler warnings:

drivers/media/test-drivers/vivid/vivid-rds-gen.c: In function 'vivid_rds_gen_fill':
drivers/media/test-drivers/vivid/vivid-rds-gen.c:147:56: warning: '.' directive output may be truncated writing 1 byte into a region of size between 0 and 3 [-Wformat-truncation=]
  147 |         snprintf(rds->psname, sizeof(rds->psname), "%6d.%1d",
      |                                                        ^
drivers/media/test-drivers/vivid/vivid-rds-gen.c:147:52: note: directive argument in the range [0, 9]
  147 |         snprintf(rds->psname, sizeof(rds->psname), "%6d.%1d",
      |                                                    ^~~~~~~~~
drivers/media/test-drivers/vivid/vivid-rds-gen.c:147:9: note: 'snprintf' output between 9 and 12 bytes into a destination of size 9
  147 |         snprintf(rds->psname, sizeof(rds->psname), "%6d.%1d",
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  148 |                  freq / 16, ((freq & 0xf) * 10) / 16);
      |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: gspca: cpia1: shift-out-of-bounds in set_flicker

[ Upstream commit 099be1822d1f095433f4b08af9cc9d6308ec1953 ]

Syzkaller reported the following issue:
UBSAN: shift-out-of-bounds in drivers/media/usb/gspca/cpia1.c:1031:27
shift exponent 245 is too large for 32-bit type 'int'

When the value of the variable "sd->params.exposure.gain" exceeds the
number of bits in an integer, a shift-out-of-bounds error is reported. It
is triggered because the variable "currentexp" cannot be left-shifted by
more than the number of bits in an integer. In order to avoid invalid
range during left-shift, the conditional expression is added.

Reported-by: syzbot+e27f3dbdab04e43b9f73@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/20230818164522.12806-1-coolrrsh@gmail.com
Link: https://syzkaller.appspot.com/bug?extid=e27f3dbdab04e43b9f73
Signed-off-by: Rajeshwar R Shinde <coolrrsh@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data.

[ Upstream commit b53e9758a31c683fc8615df930262192ed5f034b ]

The `i3c_master_bus_init` function may attach the I2C devices before the
I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used
before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails,
the DAT `cleanup` will execute before the device is detached, which will
execue DAT `free_entry` function. The above scenario can cause the driver
to use DAT_data when it is NULL.

Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20231023080237.560936-1-billy_tsai@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio-blk: fix implicit overflow on virtio_max_dma_size

[ Upstream commit fafb51a67fb883eb2dde352539df939a251851be ]

The following codes have an implicit conversion from size_t to u32:
(u32)max_size = (size_t)virtio_max_dma_size(vdev);

This may lead overflow, Ex (size_t)4G -> (u32)0. Once
virtio_max_dma_size() has a larger size than U32_MAX, use U32_MAX
instead.

Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230904061045.510460-1-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: sun6i-p2wi: Prevent potential division by zero

[ Upstream commit 5ac61d26b8baff5b2e5a9f3dc1ef63297e4b53e7 ]

Make sure we don't OOPS in case clock-frequency is set to 0 in a DT. The
variable set here is later used as a divisor.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: fix memleak in i2c_new_client_device()

[ Upstream commit 6af79f7fe748fe6a3c5c3a63d7f35981a82c2769 ]

Yang Yingliang reported a memleak:
===

I got memory leak as follows when doing fault injection test:

unreferenced object 0xffff888014aec078 (size 8):
  comm "xrun", pid 356, jiffies 4294910619 (age 16.332s)
  hex dump (first 8 bytes):
    31 2d 30 30 31 63 00 00                          1-001c..
  backtrace:
    [<00000000eb56c0a9>] __kmalloc_track_caller+0x1a6/0x300
    [<000000000b220ea3>] kvasprintf+0xad/0x140
    [<00000000b83203e5>] kvasprintf_const+0x62/0x190
    [<000000002a5eab37>] kobject_set_name_vargs+0x56/0x140
    [<00000000300ac279>] dev_set_name+0xb0/0xe0
    [<00000000b66ebd6f>] i2c_new_client_device+0x7e4/0x9a0

If device_register() returns error in i2c_new_client_device(),
the name allocated by i2c_dev_set_name() need be freed. As
comment of device_register() says, it should use put_device()
to give up the reference in the error path.

===
I think this solution is less intrusive and more robust than he
originally proposed solutions, though.

Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Closes: http://patchwork.ozlabs.org/project/linux-i2c/patch/20221124085448.3620240-1-yangyingliang@huawei.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: i801: Add support for Intel Birch Stream SoC

[ Upstream commit 8c56f9ef25a33e51f09a448d25cf863b61c9658d ]

Add SMBus PCI ID on Intel Birch Stream SoC.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler

[ Upstream commit 45a832f989e520095429589d5b01b0c65da9b574 ]

Do not loop over ring headers in hci_dma_irq_handler() that are not
allocated and enabled in hci_dma_init(). Otherwise out of bounds access
will occur from rings->headers[i] access when i >= number of allocated
ring headers.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20230921055704.1087277-5-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

9p: v9fs_listxattr: fix %s null argument warning

[ Upstream commit 9b5c6281838fc84683dd99b47302d81fce399918 ]

W=1 warns about null argument to kprintf:
In file included from fs/9p/xattr.c:12:
In function ‘v9fs_xattr_get’,
    inlined from ‘v9fs_listxattr’ at fs/9p/xattr.c:142:9:
include/net/9p/9p.h:55:2: error: ‘%s’ directive argument is null
[-Werror=format-overflow=]
   55 |  _p9_debug(level, __func__, fmt, ##__VA_ARGS__)
      |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Use an empty string instead of :
 - this is ok 9p-wise because p9pdu_vwritef serializes a null string
and an empty string the same way (one '0' word for length)
 - since this degrades the print statements, add new single quotes for
xattr's name delimter (Old: "file = (null)", new: "file = ''")

Link: https://lore.kernel.org/r/20231008060138.517057-1-suhui@nfschina.com
Suggested-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Acked-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Message-ID: <20231025103445.1248103-2-asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

9p/trans_fd: Annotate data-racy writes to file::f_flags

[ Upstream commit 355f074609dbf3042900ea9d30fcd2b0c323a365 ]

syzbot reported:

 | BUG: KCSAN: data-race in p9_fd_create / p9_fd_create
 |
 | read-write to 0xffff888130fb3d48 of 4 bytes by task 15599 on cpu 0:
 |  p9_fd_open net/9p/trans_fd.c:842 [inline]
 |  p9_fd_create+0x210/0x250 net/9p/trans_fd.c:1092
 |  p9_client_create+0x595/0xa70 net/9p/client.c:1010
 |  v9fs_session_init+0xf9/0xd90 fs/9p/v9fs.c:410
 |  v9fs_mount+0x69/0x630 fs/9p/vfs_super.c:123
 |  legacy_get_tree+0x74/0xd0 fs/fs_context.c:611
 |  vfs_get_tree+0x51/0x190 fs/super.c:1519
 |  do_new_mount+0x203/0x660 fs/namespace.c:3335
 |  path_mount+0x496/0xb30 fs/namespace.c:3662
 |  do_mount fs/namespace.c:3675 [inline]
 |  __do_sys_mount fs/namespace.c:3884 [inline]
 |  [...]
 |
 | read-write to 0xffff888130fb3d48 of 4 bytes by task 15563 on cpu 1:
 |  p9_fd_open net/9p/trans_fd.c:842 [inline]
 |  p9_fd_create+0x210/0x250 net/9p/trans_fd.c:1092
 |  p9_client_create+0x595/0xa70 net/9p/client.c:1010
 |  v9fs_session_init+0xf9/0xd90 fs/9p/v9fs.c:410
 |  v9fs_mount+0x69/0x630 fs/9p/vfs_super.c:123
 |  legacy_get_tree+0x74/0xd0 fs/fs_context.c:611
 |  vfs_get_tree+0x51/0x190 fs/super.c:1519
 |  do_new_mount+0x203/0x660 fs/namespace.c:3335
 |  path_mount+0x496/0xb30 fs/namespace.c:3662
 |  do_mount fs/namespace.c:3675 [inline]
 |  __do_sys_mount fs/namespace.c:3884 [inline]
 |  [...]
 |
 | value changed: 0x00008002 -> 0x00008802

Within p9_fd_open(), O_NONBLOCK is added to f_flags of the read and
write files. This may happen concurrently if e.g. mounting process
modifies the fd in another thread.

Mark the plain read-modify-writes as intentional data-races, with the
assumption that the result of executing the accesses concurrently will
always result in the same result despite the accesses themselves not
being atomic.

Reported-by: syzbot+e441aeeb422763cc5511@syzkaller.appspotmail.com
Signed-off-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/ZO38mqkS0TYUlpFp@elver.google.com
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Message-ID: <20231025103445.1248103-1-asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: f_ncm: Always set current gadget in ncm_bind()

[ Upstream commit a04224da1f3424b2c607b12a3bd1f0e302fb8231 ]

Previously, gadget assignment to the net device occurred exclusively
during the initial binding attempt.

Nevertheless, the gadget pointer could change during bind/unbind
cycles due to various conditions, including the unloading/loading
of the UDC device driver or the detachment/reconnection of an
OTG-capable USB hub device.

This patch relocates the gether_set_gadget() function out from
ncm_opts->bound condition check, ensuring that the correct gadget
is assigned during each bind request.

The provided logs demonstrate the consistency of ncm_opts throughout
the power cycle, while the gadget may change.

* OTG hub connected during boot up and assignment of gadget and
  ncm_opts pointer

[    2.366301] usb 2-1.5: New USB device found, idVendor=2996, idProduct=0105
[    2.366304] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.366306] usb 2-1.5: Product: H2H Bridge
[    2.366308] usb 2-1.5: Manufacturer: Aptiv
[    2.366309] usb 2-1.5: SerialNumber: 13FEB2021
[    2.427989] usb 2-1.5: New USB device found, VID=2996, PID=0105
[    2.428959] dabridge 2-1.5:1.0: dabridge 2-4 total endpoints=5, 0000000093a8d681
[    2.429710] dabridge 2-1.5:1.0: P(0105) D(22.06.22) F(17.3.16) H(1.1) high-speed
[    2.429714] dabridge 2-1.5:1.0: Hub 2-2 P(0151) V(06.87)
[    2.429956] dabridge 2-1.5:1.0: All downstream ports in host mode

[    2.430093] gadget 000000003c414d59 ------> gadget pointer

* NCM opts and associated gadget pointer during First ncm_bind

[   34.763929] NCM opts 00000000aa304ac9
[   34.763930] NCM gadget 000000003c414d59

* OTG capable hub disconnecte or assume driver unload.

[   97.203114] usb 2-1: USB disconnect, device number 2
[   97.203118] usb 2-1.1: USB disconnect, device number 3
[   97.209217] usb 2-1.5: USB disconnect, device number 4
[   97.230990] dabr_udc deleted

* Reconnect the OTG hub or load driver assaign new gadget pointer.

[  111.534035] usb 2-1.1: New USB device found, idVendor=2996, idProduct=0120, bcdDevice= 6.87
[  111.534038] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  111.534040] usb 2-1.1: Product: Vendor
[  111.534041] usb 2-1.1: Manufacturer: Aptiv
[  111.534042] usb 2-1.1: SerialNumber: Superior
[  111.535175] usb 2-1.1: New USB device found, VID=2996, PID=0120
[  111.610995] usb 2-1.5: new high-speed USB device number 8 using xhci-hcd
[  111.630052] usb 2-1.5: New USB device found, idVendor=2996, idProduct=0105, bcdDevice=21.02
[  111.630055] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  111.630057] usb 2-1.5: Product: H2H Bridge
[  111.630058] usb 2-1.5: Manufacturer: Aptiv
[  111.630059] usb 2-1.5: SerialNumber: 13FEB2021
[  111.687464] usb 2-1.5: New USB device found, VID=2996, PID=0105
[  111.690375] dabridge 2-1.5:1.0: dabridge 2-8 total endpoints=5, 000000000d87c961
[  111.691172] dabridge 2-1.5:1.0: P(0105) D(22.06.22) F(17.3.16) H(1.1) high-speed
[  111.691176] dabridge 2-1.5:1.0: Hub 2-6 P(0151) V(06.87)
[  111.691646] dabridge 2-1.5:1.0: All downstream ports in host mode

[  111.692298] gadget 00000000dc72f7a9 --------> new gadget ptr on connect

* NCM opts and associated gadget pointer during second ncm_bind

[  113.271786] NCM opts 00000000aa304ac9 -----> same opts ptr used during first bind
[  113.271788] NCM gadget 00000000dc72f7a9 ----> however new gaget ptr, that will not set
                                                 in net_device due to ncm_opts->bound = true

Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Link: https://lore.kernel.org/r/20231020153324.82794-1-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: xhci: Avoid XHCI resume delay if SSUSB device is not present

[ Upstream commit 6add6dd345cb754ce18ff992c7264cabf31e59f6 ]

There is a 120ms delay implemented for allowing the XHCI host controller to
detect a U3 wakeup pulse.  The intention is to wait for the device to retry
the wakeup event if the USB3 PORTSC doesn't reflect the RESUME link status
by the time it is checked.  As per the USB3 specification:

  tU3WakeupRetryDelay ("Table 7-12. LTSSM State Transition Timeouts")

This would allow the XHCI resume sequence to determine if the root hub
needs to be also resumed.  However, in case there is no device connected,
or if there is only a HSUSB device connected, this delay would still affect
the overall resume timing.

Since this delay is solely for detecting U3 wake events (USB3 specific)
then ignore this delay for the disconnected case and the HSUSB connected
only case.

[skip helper function, rename usb3_connected variable -Mathias ]

Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231019102924.2797346-20-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix error handling of __get_node_page

[ Upstream commit 9b4c8dd99fe48721410741651d426015e03a4b7a ]

Use f2fs_handle_error to record inconsistent node block error
and return -EFSCORRUPTED instead of -EINVAL.

Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix error path of __f2fs_build_free_nids

[ Upstream commit a5e80e18f268ea7c7a36bc4159de0deb3b5a2171 ]

If NAT is corrupted, let scan_nat_page() return EFSCORRUPTED, so that,
caller can set SBI_NEED_FSCK flag into checkpoint for later repair by
fsck.

Also, this patch introduces a new fscorrupted error flag, and in above
scenario, it will persist the error flag into superblock synchronously
to avoid it has no luck to trigger a checkpoint to record SBI_NEED_FSCK

Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soundwire: dmi-quirks: update HP Omen match

[ Upstream commit 4ea2b6d3128ea4d502c4015df0dc16b7d1070954 ]

New platforms have a slightly different DMI product name, remove
trailing characters/digits to handle all cases

Closes: https://github.com/thesofproject/linux/issues/4611
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20231013010833.114271-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: ucsi: glink: use the connector orientation GPIO to provide switch events

[ Upstream commit c6165ed2f425c273244191930a47c8be23bc51bd ]

On SM8550, the non-altmode orientation is not given anymore within
altmode events, even with USB SVIDs events.

On the other side, the Type-C connector orientation is correctly
reported by a signal from the PMIC.

Take this gpio signal when we detect some Type-C port activity
to notify any Type-C switches tied to the Type-C port connectors.

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231002-topic-sm8550-upstream-type-c-orientation-v2-2-125410d3ff95@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: core: configure TX/RX threshold for DWC3_IP

[ Upstream commit e72fc8d6a12af7ae8dd1b52cf68ed68569d29f80 ]

In Synopsys's dwc3 data book:
To avoid underrun and overrun during the burst, in a high-latency bus
system (like USB), threshold and burst size control is provided through
GTXTHRCFG and GRXTHRCFG registers.

In Realtek DHC SoC, DWC3 USB 3.0 uses AHB system bus. When dwc3 is
connected with USB 2.5G Ethernet, there will be overrun problem.
Therefore, setting TX/RX thresholds can avoid this issue.

Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230912041904.30721-1-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: qualcomm: phy-qcom-eusb2-repeater: Zero out untouched tuning regs

[ Upstream commit 99a517a582fc1272d1d3cf3b9e671a14d7db77b8 ]

The vendor kernel zeroes out all tuning data outside the init sequence
as part of initialization. Follow suit to avoid UB.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230830-topic-eusb2_override-v2-3-7d8c893d93f6@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: qualcomm: phy-qcom-eusb2-repeater: Use regmap_fields

[ Upstream commit 4ba2e52718c0ce4ece6a269bec84319c355c030f ]

Switch to regmap_fields, so that the values written into registers are
sanitized by their explicit sizes and the different registers are
structured in an iterable object to make external changes to the init
sequence simpler.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230830-topic-eusb2_override-v2-2-7d8c893d93f6@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: phy: qcom,snps-eusb2-repeater: Add magic tuning overrides

[ Upstream commit c20b59b2996c89c4f072c3312e6210528a298330 ]

The EUSB2 repeater requires some alterations to its init sequence,
depending on board design.

Add support for making the necessary changes to that sequence to make USB
functional on SM8550-based Xperia 1 V.

They all have lackluster description due to lack of information.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230830-topic-eusb2_override-v2-1-7d8c893d93f6@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: vcc: Add check for kstrdup() in vcc_probe()

[ Upstream commit d81ffb87aaa75f842cd7aa57091810353755b3e6 ]

Add check for the return value of kstrdup() and return the error, if it
fails in order to avoid NULL pointer dereference.

Signed-off-by: Yi Yang <yiyang13@huawei.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230904035220.48164-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thunderbolt: Apply USB 3.x bandwidth quirk only in software connection manager

[ Upstream commit 0c35ac18256942e66d8dab6ca049185812e60c69 ]

This is not needed when firmware connection manager is run so limit this
to software connection manager.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: stm32-adc: harden against NULL pointer deref in stm32_adc_probe()

[ Upstream commit 3a23b384e7e3d64d5587ad10729a34d4f761517e ]

of_match_device() may fail and returns a NULL pointer.

In practice there is no known reasonable way to trigger this, but
in case one is added in future, harden the code by adding the check

Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_994DA85912C937E3B5405BA960B31ED90A08@qq.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: intel-lpss: Add Intel Lunar Lake-M PCI IDs

[ Upstream commit e53b22b10c6e0de0cf2a03a92b18fdad70f266c7 ]

Add Intel Lunar Lake-M SoC PCI IDs.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20231002083344.75611-1-jarkko.nikula@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

exfat: support handle zero-size directory

[ Upstream commit dab48b8f2fe7264d51ec9eed0adea0fe3c78830a ]

After repairing a corrupted file system with exfatprogs' fsck.exfat,
zero-size directories may result. It is also possible to create
zero-size directories in other exFAT implementation, such as Paragon
ufsd dirver.

As described in the specification, the lower directory size limits
is 0 bytes.

Without this commit, sub-directories and files cannot be created
under a zero-size directory, and it cannot be removed.

Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: Add quirk for Dell Pro Wireless Keyboard and Mouse KM5221W

[ Upstream commit 62cc9c3cb3ec1bf31cc116146185ed97b450836a ]

This device needs ALWAYS_POLL quirk, otherwise it keeps reconnecting
indefinitely.

Reported-by: Robert Ayrapetyan <robert.ayrapetyan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/qm - prevent soft lockup in receive loop

[ Upstream commit 33fc506d2ac514be1072499a263c3bff8c7c95a0 ]

In the scenario where the accelerator business is fully loaded.
When the workqueue receiving messages and performing callback
processing, there are a large number of messages that need to be
received, and there are continuously messages that have been
processed and need to be received.
This will cause the receive loop here to be locked for a long time.
This scenario will cause watchdog timeout problems on OS with kernel
preemption turned off.

The error logs:
watchdog: BUG: soft lockup - CPU#23 stuck for 23s! [kworker/u262:1:1407]
[ 1461.978428][   C23] Call trace:
[ 1461.981890][   C23]  complete+0x8c/0xf0
[ 1461.986031][   C23]  kcryptd_async_done+0x154/0x1f4 [dm_crypt]
[ 1461.992154][   C23]  sec_skcipher_callback+0x7c/0xf4 [hisi_sec2]
[ 1461.998446][   C23]  sec_req_cb+0x104/0x1f4 [hisi_sec2]
[ 1462.003950][   C23]  qm_poll_req_cb+0xcc/0x150 [hisi_qm]
[ 1462.009531][   C23]  qm_work_process+0x60/0xc0 [hisi_qm]
[ 1462.015101][   C23]  process_one_work+0x1c4/0x470
[ 1462.020052][   C23]  worker_thread+0x150/0x3c4
[ 1462.024735][   C23]  kthread+0x108/0x13c
[ 1462.028889][   C23]  ret_from_fork+0x10/0x18

Therefore, it is necessary to add an actively scheduled operation in the
while loop to prevent this problem.
After adding it, no matter whether the OS turns on or off the kernel
preemption function. Neither will cause watchdog timeout issues.

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: soc-acpi-cht: Add Lenovo Yoga Tab 3 Pro YT3-X90 quirk

[ Upstream commit 2cb54788393134d8174ee594002baae3ce52c61e ]

The Lenovo Yoga Tab 3 Pro YT3-X90 x86 tablet, which ships with Android with
a custom kernel as factory OS, does not list the used WM5102 codec inside
its DSDT.

Workaround this with a new snd_soc_acpi_intel_baytrail_machines[] entry
which matches on the SST id instead of the codec id like nocodec does,
combined with using a machine_quirk callback which returns NULL on
other machines to skip the new entry on other machines.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231021211534.114991-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk

[ Upstream commit 04e82fa5951ca66495d7b05665eff673aa3852b4 ]

Use FIELD_GET() to remove dependences on the field position, i.e., the
shift value.  No functional change intended.

Separate because this isn't as trivial as the other FIELD_GET() changes.

See 907830b0fc9e ("PCI: Add a REBAR size quirk for Sapphire RX 5600 XT
Pulse")

Link: https://lore.kernel.org/r/20231010204436.1000644-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: pci_endpoint_test: Add Device ID for R-Car S4-8 PCIe controller

[ Upstream commit 6c4b39937f4e65688ea294725ae432b2565821ff ]

Add Renesas R8A779F0 in pci_device_id table so that pci-epf-test
can be used for testing PCIe EP on R-Car S4-8.

Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-16-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: dwc: Add missing PCI_EXP_LNKCAP_MLW handling

[ Upstream commit 89db0793c9f2da265ecb6c1681f899d9af157f37 ]

Update dw_pcie_link_set_max_link_width() to set PCI_EXP_LNKCAP_MLW.

In accordance with the DW PCIe RC/EP HW manuals [1,2,3,...] aside with
the PORT_LINK_CTRL_OFF.LINK_CAPABLE and GEN2_CTRL_OFF.NUM_OF_LANES[8:0]
field there is another one which needs to be updated.

It's LINK_CAPABILITIES_REG.PCIE_CAP_MAX_LINK_WIDTH. If it isn't done at
the very least the maximum link-width capability CSR won't expose the
actual maximum capability.

[1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
    Version 4.60a, March 2015, p.1032
[2] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
    Version 4.70a, March 2016, p.1065
[3] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
    Version 4.90a, March 2016, p.1057
...
[X] DesignWare Cores PCI Express Controller Databook - DWC PCIe Endpoint,
      Version 5.40a, March 2019, p.1396
[X+1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
      Version 5.40a, March 2019, p.1266

Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-4-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: dwc: Add dw_pcie_link_set_max_link_width()

[ Upstream commit a9a1bcba90254975d4adbcca53f720318cf81c0c ]

This is a preparation before adding the Max-Link-width capability
setup which would in its turn complete the max-link-width setup
procedure defined by Synopsys in the HW-manual.

Seeing there is a max-link-speed setup method defined in the DW PCIe
core driver it would be good to have a similar function for the link
width setup.

That's why we need to define a dedicated function first from already
implemented but incomplete link-width setting up code.

Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Disable ATS for specific Intel IPU E2000 devices

[ Upstream commit a18615b1cfc04f00548c60eb9a77e0ce56e848fd ]

Due to a hardware issue in A and B steppings of Intel IPU E2000, it expects
wrong endianness in ATS invalidation message body. This problem can lead to
outdated translations being returned as valid and finally cause system
instability.

To prevent such issues, add quirk_intel_e2000_no_ats() to disable ATS for
vulnerable IPU E2000 devices.

Link: https://lore.kernel.org/r/20230908143606.685930-3-bartosz.pawlowski@intel.com
Signed-off-by: Bartosz Pawlowski <bartosz.pawlowski@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Extract ATS disabling to a helper function

[ Upstream commit f18b1137d38c091cc8c16365219f0a1d4a30b3d1 ]

Introduce quirk_no_ats() helper function to provide a standard way to
disable ATS capability in PCI quirks.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230908143606.685930-2-bartosz.pawlowski@intel.com
Signed-off-by: Bartosz Pawlowski <bartosz.pawlowski@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Use FIELD_GET() to extract Link Width

[ Upstream commit d1f9b39da4a5347150246871325190018cda8cb3 ]

Use FIELD_GET() to extract PCIe Negotiated and Maximum Link Width fields
instead of custom masking and shifting.

Link: https://lore.kernel.org/r/20230919125648.1920-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: drop duplicate include of <linux/bitfield.h>]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup()

[ Upstream commit 4df105f0ce9f6f30cda4e99f577150d23f0c9c5f ]

fc_lport_ptp_setup() did not check the return value of fc_rport_create()
which can return NULL and would cause a NULL pointer dereference. Address
this issue by checking return value of fc_rport_create() and log error
message on fc_rport_create() failed.

Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20231011130350.819571-1-haowenchao2@huawei.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Do error check on own line to split long "if" conditions

[ Upstream commit d15f18053e5cc5576af9e7eef0b2a91169b6326d ]

Placing PCI error code check inside "if" condition usually results in need
to split lines. Combined with additional conditions the "if" condition
becomes messy.

Convert to the usual error handling pattern with an additional variable to
improve code readability. In addition, reverse the logic in
pci_find_vsec_capability() to get rid of &&.

No functional changes intended.

Link: https://lore.kernel.org/r/20230911125354.25501-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: PCI_POSSIBLE_ERROR()]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

atm: iphase: Do PCI error checks on own line

[ Upstream commit c28742447ca9879b52fbaf022ad844f0ffcd749c ]

In get_esi() PCI errors are checked inside line-split "if" conditions (in
addition to the file not following the coding style). To make the code in
get_esi() more readable, fix the coding style and use the usual error
handling pattern with a separate variable.

In addition, initialization of 'error' variable at declaration is not
needed.

No functional changes intended.

Link: https://lore.kernel.org/r/20230911125354.25501-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: mvebu: Use FIELD_PREP() with Link Width

[ Upstream commit 408599ec561ad5862cda4f107626009f6fa97a74 ]

mvebu_pcie_setup_hw() setups the Maximum Link Width field in the Link
Capabilities registers using an open-coded variant of FIELD_PREP() with
a literal in shift. Improve readability by using
FIELD_PREP(PCI_EXP_LNKCAP_MLW, ...).

Link: https://lore.kernel.org/r/20230919125648.1920-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields

[ Upstream commit 759574abd78e3b47ec45bbd31a64e8832cf73f97 ]

Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of
custom masking and shifting.

Similarly, change custom code that misleadingly used
PCI_EXP_LNKSTA_NLW_SHIFT to prepare value for PCI_EXP_LNKCAP write
to use FIELD_PREP() with correct field define (PCI_EXP_LNKCAP_MLW).

Link: https://lore.kernel.org/r/20230919125648.1920-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: of: Add quirk for mt2701-cs42448 ASoC sound

[ Upstream commit 9e189e80dcb68528dea9e061d9704993f98cb84f ]

These gpio names are due to old DT bindings not following the
"-gpio"/"-gpios" conventions. Handle it using a quirk so the
driver can just look up the GPIOs.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231006-descriptors-asoc-mediatek-v1-1-07fe79f337f5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Fix possible null-ptr-deref when assigning a stream

[ Upstream commit f93dc90c2e8ed664985e366aa6459ac83cdab236 ]

While AudioDSP drivers assign streams exclusively of HOST or LINK type,
nothing blocks a user to attempt to assign a COUPLED stream. As
supplied substream instance may be a stub, what is the case when
code-loading, such scenario ends with null-ptr-deref.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20231006102857.749143-2-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9320/1: fix stack depot IRQ stack filter

[ Upstream commit b0150014878c32197cfa66e3e2f79e57f66babc0 ]

Place IRQ handlers such as gic_handle_irq() in the irqentry section even
if FUNCTION_GRAPH_TRACER is not enabled.  Without this, the stack
depot's filter_irq_stacks() does not correctly filter out IRQ stacks in
those configurations, which hampers deduplication and eventually leads
to "Stack depot reached limit capacity" splats with KASAN.

A similar fix was done for arm64 in commit f6794950f0e5ba37e3bbed
("arm64: set __exception_irq_entry with __irq_entry as a default").

Link: https://lore.kernel.org/r/20230803-arm-irqentry-v1-1-8aad8e260b1c@axis.com
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround

[ Upstream commit 46a0a2c96f0f47628190f122c2e3d879e590bcbe ]

Built-in firmware of cptkbd handles scrolling by itself (when middle
button is pressed) but with issues: it does not support horizontal and
hi-res scrolling and upon middle button release it sends middle button
click even if there was a scrolling event. Commit 3cb5ff0220e3 ("HID:
lenovo: Hide middle-button press until release") workarounds last
issue but it's impossible to workaround scrolling-related issues
without firmware modification.

Likely, Dennis Schneider has reverse engineered the firmware and
provided an instruction on how to patch it [1]. However,
aforementioned workaround prevents userspace (libinput) from knowing
exact moment when middle button has been pressed down and performing
"On-Button scrolling". This commit detects correctly-behaving patched
firmware if cursor movement events has been received during middle
button being pressed and stops applying workaround for this device.

Link: https://hohlerde.org/rauch/en/elektronik/projekte/tpkbd-fix/
Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jfs: fix array-index-out-of-bounds in diAlloc

[ Upstream commit 05d9ea1ceb62a55af6727a69269a4fd310edf483 ]

Currently there is not check against the agno of the iag while
allocating new inodes to avoid fragmentation problem. Added the check
which is required.

Reported-by: syzbot+79d792676d8ac050949f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=79d792676d8ac050949f
Signed-off-by: Manas Ghandat <ghandatmanas@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jfs: fix array-index-out-of-bounds in dbFindLeaf

[ Upstream commit 22cad8bc1d36547cdae0eef316c47d917ce3147c ]

Currently while searching for dmtree_t for sufficient free blocks there
is an array out of bounds while getting element in tp->dm_stree. To add
the required check for out of bound we first need to determine the type
of dmtree. Thus added an extra parameter to dbFindLeaf so that the type
of tree can be determined and the required check can be applied.

Reported-by: syzbot+aea1ad91e854d0a83e04@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=aea1ad91e854d0a83e04
Signed-off-by: Manas Ghandat <ghandatmanas@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/jfs: Add validity check for db_maxag and db_agpref

[ Upstream commit 64933ab7b04881c6c18b21ff206c12278341c72e ]

Both db_maxag and db_agpref are used as the index of the
db_agfree array, but there is currently no validity check for
db_maxag and db_agpref, which can lead to errors.

The following is related bug reported by Syzbot:

UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:639:20
index 7936 is out of range for type 'atomic_t[128]'

Add checking that the values of db_maxag and db_agpref are valid
indexes for the db_agfree array.

Reported-by: syzbot+38e876a8aa44b7115c76@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=38e876a8aa44b7115c76
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/jfs: Add check for negative db_l2nbperpage

[ Upstream commit 525b861a008143048535011f3816d407940f4bfa ]

l2nbperpage is log2(number of blks per page), and the minimum legal
value should be 0, not negative.

In the case of l2nbperpage being negative, an error will occur
when subsequently used as shift exponent.

Syzbot reported this bug:

UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:799:12
shift exponent -16777216 is negative

Reported-by: syzbot+debee9ab7ae2b34b0307@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=debee9ab7ae2b34b0307
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ibmvfc: Remove BUG_ON in the case of an empty event pool

[ Upstream commit b39f2d10b86d0af353ea339e5815820026bca48f ]

In practice the driver should never send more commands than are allocated
to a queue's event pool. In the unlikely event that this happens, the code
asserts a BUG_ON, and in the case that the kernel is not configured to
crash on panic returns a junk event pointer from the empty event list
causing things to spiral from there. This BUG_ON is a historical artifact
of the ibmvfc driver first being upstreamed, and it is well known now that
the use of BUG_ON is bad practice except in the most unrecoverable
scenario. There is nothing about this scenario that prevents the driver
from recovering and carrying on.

Remove the BUG_ON in question from ibmvfc_get_event() and return a NULL
pointer in the case of an empty event pool. Update all call sites to
ibmvfc_get_event() to check for a NULL pointer and perfrom the appropriate
failure or recovery action.

Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-2-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hisi_sas: Set debugfs_dir pointer to NULL after removing debugfs

[ Upstream commit 6de426f9276c448e2db7238911c97fb157cb23be ]

If init debugfs failed during device registration due to memory allocation
failure, debugfs_remove_recursive() is called, after which debugfs_dir is
not set to NULL. debugfs_remove_recursive() will be called again during
device removal. As a result, illegal pointer is accessed.

[ 1665.467244] hisi_sas_v3_hw 0000:b4:02.0: failed to init debugfs!
...
[ 1669.836708] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0
[ 1669.872669] pc : down_write+0x24/0x70
[ 1669.876315] lr : down_write+0x1c/0x70
[ 1669.879961] sp : ffff000036f53a30
[ 1669.883260] x29: ffff000036f53a30 x28: ffffa027c31549f8
[ 1669.888547] x27: ffffa027c3140000 x26: 0000000000000000
[ 1669.893834] x25: ffffa027bf37c270 x24: ffffa027bf37c270
[ 1669.899122] x23: ffff0000095406b8 x22: ffff0000095406a8
[ 1669.904408] x21: 0000000000000000 x20: ffffa027bf37c310
[ 1669.909695] x19: 00000000000000a0 x18: ffff8027dcd86f10
[ 1669.914982] x17: 0000000000000000 x16: 0000000000000000
[ 1669.920268] x15: 0000000000000000 x14: ffffa0274014f870
[ 1669.925555] x13: 0000000000000040 x12: 0000000000000228
[ 1669.930842] x11: 0000000000000020 x10: 0000000000000bb0
[ 1669.936129] x9 : ffff000036f537f0 x8 : ffff80273088ca10
[ 1669.941416] x7 : 000000000000001d x6 : 00000000ffffffff
[ 1669.946702] x5 : ffff000008a36310 x4 : ffff80273088be00
[ 1669.951989] x3 : ffff000009513e90 x2 : 0000000000000000
[ 1669.957276] x1 : 00000000000000a0 x0 : ffffffff00000001
[ 1669.962563] Call trace:
[ 1669.965000]  down_write+0x24/0x70
[ 1669.968301]  debugfs_remove_recursive+0x5c/0x1b0
[ 1669.972905]  hisi_sas_debugfs_exit+0x24/0x30 [hisi_sas_main]
[ 1669.978541]  hisi_sas_v3_remove+0x130/0x150 [hisi_sas_v3_hw]
[ 1669.984175]  pci_device_remove+0x48/0xd8
[ 1669.988082]  device_release_driver_internal+0x1b4/0x250
[ 1669.993282]  device_release_driver+0x28/0x38
[ 1669.997534]  pci_stop_bus_device+0x84/0xb8
[ 1670.001611]  pci_stop_and_remove_bus_device_locked+0x24/0x40
[ 1670.007244]  remove_store+0xfc/0x140
[ 1670.010802]  dev_attr_store+0x44/0x60
[ 1670.014448]  sysfs_kf_write+0x58/0x80
[ 1670.018095]  kernfs_fop_write+0xe8/0x1f0
[ 1670.022000]  __vfs_write+0x60/0x190
[ 1670.025472]  vfs_write+0xac/0x1c0
[ 1670.028771]  ksys_write+0x6c/0xd8
[ 1670.032071]  __arm64_sys_write+0x24/0x30
[ 1670.035977]  el0_svc_common+0x78/0x130
[ 1670.039710]  el0_svc_handler+0x38/0x78
[ 1670.043442]  el0_svc+0x8/0xc

To fix this, set debugfs_dir to NULL after debugfs_remove_recursive().

Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1694571327-78697-2-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hfi1: Use FIELD_GET() to extract Link Width

[ Upstream commit 8bf7187d978610b9e327a3d92728c8864a575ebd ]

Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of
custom masking and shifting, and remove extract_width() which only
wraps that FIELD_GET().

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230919125648.1920-2-ilpo.jarvinen@linux.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: ipc4: handle EXCEPTION_CAUGHT notification from firmware

[ Upstream commit c1c48fd6bbe788458e3685fea74bdb3cb148ff93 ]

Driver will receive exception IPC message and process it by
snd_sof_dsp_panic.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: pcrypt - Fix hungtask for PADATA_RESET

[ Upstream commit 8f4f68e788c3a7a696546291258bfa5fdb215523 ]

We found a hungtask bug in test_aead_vec_cfg as follows:

INFO: task cryptomgr_test:391009 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Call trace:
 __switch_to+0x98/0xe0
 __schedule+0x6c4/0xf40
 schedule+0xd8/0x1b4
 schedule_timeout+0x474/0x560
 wait_for_common+0x368/0x4e0
 wait_for_completion+0x20/0x30
 wait_for_completion+0x20/0x30
 test_aead_vec_cfg+0xab4/0xd50
 test_aead+0x144/0x1f0
 alg_test_aead+0xd8/0x1e0
 alg_test+0x634/0x890
 cryptomgr_test+0x40/0x70
 kthread+0x1e0/0x220
 ret_from_fork+0x10/0x18
 Kernel panic - not syncing: hung_task: blocked tasks

For padata_do_parallel, when the return err is 0 or -EBUSY, it will call
wait_for_completion(&wait->completion) in test_aead_vec_cfg. In normal
case, aead_request_complete() will be called in pcrypt_aead_serial and the
return err is 0 for padata_do_parallel. But, when pinst->flags is
PADATA_RESET, the return err is -EBUSY for padata_do_parallel, and it
won't call aead_request_complete(). Therefore, test_aead_vec_cfg will
hung at wait_for_completion(&wait->completion), which will cause
hungtask.

The problem comes as following:
(padata_do_parallel)                 |
    rcu_read_lock_bh();              |
    err = -EINVAL;                   |   (padata_replace)
                                     |     pinst->flags |= PADATA_RESET;
    err = -EBUSY                     |
    if (pinst->flags & PADATA_RESET) |
        rcu_read_unlock_bh()         |
        return err

In order to resolve the problem, we replace the return err -EBUSY with
-EAGAIN, which means parallel_data is changing, and the caller should call
it again.

v3:
remove retry and just change the return err.
v2:
introduce padata_try_do_parallel() in pcrypt_aead_encrypt and
pcrypt_aead_decrypt to solve the hungtask.

Signed-off-by: Lu Jialin <lujialin4@huawei.com>
Signed-off-by: Guo Zihua <guozihua@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs35l56: Use PCI SSID as the firmware UID

[ Upstream commit 1a1c3d794ef65ef2978c5e65e1aed3fe6f014e90 ]

If the driver properties do not define a cirrus,firmware-uid try to get the
PCI SSID as the UID.

On PCI-based systems the PCI SSID is used to uniquely identify the specific
sound hardware. This is the standard mechanism for x86 systems and is the
way to get a unique system identifier for systems that use the CS35L56 on
SoundWire.

For non-SoundWire systems there is no Windows equivalent of the ASoC driver
in I2C/SPI mode. These would be:

1. HDA systems, which are handled by the HDA subsystem.
2. Linux-specific systems.
3. Composite devices where the cs35l56 is not present in ACPI and is
   configured using software nodes.

Case 2 can use the firmware-uid property, though the PCI SSID is supported
as an alternative, as it is the standard PCI mechanism.

Case 3 is a SoundWire system where some other codec is the SoundWire bridge
device and CS35L56 is not listed in ACPI. As these are SoundWire systems
they will normally use the PCI SSID.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: sof_sdw: Copy PCI SSID to struct snd_soc_card

[ Upstream commit d8b387544ff4d02eda1d1839a0c601de4b037c33 ]

If the PCI SSID has been set in the struct snd_soc_acpi_mach_params,
copy this to struct snd_soc_card so that it can be used by other
ASoC components.

This is important for components that must apply system-specific
configuration.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Pass PCI SSID to machine driver

[ Upstream commit ba2de401d32625fe538d3f2c00ca73740dd2d516 ]

Pass the PCI SSID of the audio interface through to the machine driver.
This allows the machine driver to use the SSID to uniquely identify the
specific hardware configuration and apply any platform-specific
configuration.

struct snd_sof_pdata is passed around inside the SOF code, but it then
passes configuration information to the machine driver through
struct snd_soc_acpi_mach and struct snd_soc_acpi_mach_params. So SSID
information has been added to both snd_sof_pdata and
snd_soc_acpi_mach_params.

PCI does not define 0x0000 as an invalid value so we can't use zero to
indicate that the struct member was not written. Instead a flag is
included to indicate that a value has been written to the
subsystem_vendor and subsystem_device members.

sof_pci_probe() creates the struct snd_sof_pdata. It is passed a struct
pci_dev so it can fill in the SSID value.

sof_machine_check() finds the appropriate struct snd_soc_acpi_mach. It
copies the SSID information across to the struct snd_soc_acpi_mach_params.
This done before calling any custom set_mach_params() so that it could be
used by the set_mach_params() callback to apply variant params.

The machine driver receives the struct snd_soc_acpi_mach as its
platform_data.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: soc-card: Add storage for PCI SSID

[ Upstream commit 47f56e38a199bd45514b8e0142399cba4feeaf1a ]

Add members to struct snd_soc_card to store the PCI subsystem ID (SSID)
of the soundcard.

The PCI specification provides two registers to store a vendor-specific
SSID that can be read by drivers to uniquely identify a particular
"soundcard". This is defined in the PCI specification to distinguish
products that use the same silicon (and therefore have the same silicon
ID) so that product-specific differences can be applied.

PCI only defines 0xFFFF as an invalid value. 0x0000 is not defined as
invalid. So the usual pattern of zero-filling the struct and then
assuming a zero value unset will not work. A flag is included to
indicate when the SSID information has been filled in.

Unlike DMI information, which has a free-format entirely up to the vendor,
the PCI SSID has a strictly defined format and a registry of vendor IDs.

It is usual in Windows drivers that the SSID is used as the sole identifier
of the specific end-product and the Windows driver contains tables mapping
that to information about the hardware setup, rather than using ACPI
properties.

This SSID is important information for ASoC components that need to apply
hardware-specific configuration on PCI-based systems.

As the SSID is a generic part of the PCI specification and is treated as
identifying the "soundcard", it is reasonable to include this information
in struct snd_soc_card, instead of components inventing their own custom
ways to pass this information around.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: mt8188-mt6359: support dynamic pinctrl

[ Upstream commit d601bb78f06b9e3cbb52e6b87b88add9920a11b6 ]

To avoid power leakage, it is recommended to replace the default pinctrl
state with dynamic pinctrl since certain audio pinmux functions can
remain in a HIGH state even when audio is disabled. Linking pinctrl with
DAPM using SND_SOC_DAPM_PINCTRL will ensure that audio pins remain in
GPIO mode by default and only switch to an audio function when necessary.

Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230825024935.10878-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/efivarfs: create-read: fix a resource leak

[ Upstream commit 3f6f8a8c5e11a9b384a36df4f40f0c9a653b6975 ]

The opened file should be closed in main(), otherwise resource
leak will occur that this problem was discovered by code reading

Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ls208xa: use a pseudo-bus to constrain usb dma size

[ Upstream commit b39d5016456871a88f5cd141914a5043591b46f3 ]

Wrap the usb controllers in an intermediate simple-bus and use it to
constrain the dma address size of these usb controllers to the 40b
that they generate toward the interconnect. This is required because
the SoC uses 48b address sizes and this mismatch would lead to smmu
context faults [1] because the usb generates 40b addresses while the
smmu page tables are populated with 48b wide addresses.

[1]
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002000010
xhci-hcd xhci-hcd.0.auto: irq 108, io mem 0x03100000
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0xffffffb000, fsynr=0x0, cbfrsynra=0xc01, cb=3

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: Add NanoPC T6 PCIe e-key support

[ Upstream commit ac76b786cc370b000c76f3115a5d2ee76ff05c08 ]

before
~~~~
0000:00:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3588 (rev 01)
0002:20:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3588 (rev 01)
0002:21:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05)
0004:40:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3588 (rev 01)
0004:41:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05)

after
~~~
0000:00:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3588 (rev 01)
0002:20:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3588 (rev 01)
0002:21:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05)
0003:30:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3588 (rev 01)
0003:31:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8822CE 802.11ac PCIe Wireless Network Adapter
0004:40:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3588 (rev 01)
0004:41:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05)

Signed-off-by: John Clark <inindev@gmail.com>
Link: https://lore.kernel.org/r/20230906012305.7113-1-inindev@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: pmic: Fix resource leaks in a device_for_each_child_node() loop

[ Upstream commit 5692aeea5bcb9331e956628c3bc8fc9afcc9765d ]

The device_for_each_child_node loop should call fwnode_handle_put()
before return in the error cases, to avoid resource leaks.

Let's fix this bug in pmic_glink_altmode_probe().

Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Link: https://lore.kernel.org/r/20230612133452.47315-1-luhongfei@vivo.com
[bjorn: Rebased patch, moved fw_handle_put() from jump target into the loop]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd: check num of link levels when update pcie param

[ Upstream commit 406e8845356d18bdf3d3a23b347faf67706472ec ]

In SR-IOV environment, the value of pcie_table->num_of_link_levels will
be 0, and num_of_levels - 1 will cause array index out of bounds

Signed-off-by: Lin.Cao <lincao12@amd.com>
Acked-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>