review.tizen.org Git - platform/kernel/linux-starfive.git/log

selftests: forwarding: hw_stats_l3: Set addrgenmode in a separate step

Setting the IPv6 address generation mode of a net device during its
creation never worked, but after commit b0ad3c179059 ("rtnetlink: call
validate_linkmsg in rtnl_create_link") it explicitly fails [1]. The
failure is caused by the fact that validate_linkmsg() is called before
the net device is registered, when it still does not have an 'inet6_dev'.

Likewise, raising the net device before setting the address generation
mode is meaningless, because by the time the mode is set, the address
has already been generated.

Therefore, fix the test to first create the net device, then set its
IPv6 address generation mode and finally bring it up.

[1]
# ip link add name mydev addrgenmode eui64 type dummy
RTNETLINK answers: Address family not supported by protocol

Fixes: ba95e7930957 ("selftests: forwarding: hw_stats_l3: Add a new test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/f3b05d85b2bc0c3d6168fe8f7207c6c8365703db.1686580046.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'net-sched-fix-race-conditions-in-mini_qdisc_pair_swap'

Peilin Ye says:

====================
net/sched: Fix race conditions in mini_qdisc_pair_swap()

These 2 patches fix race conditions for ingress and clsact Qdiscs as
reported [1] by syzbot, split out from another [2] series (last 2 patches
of it). Per-patch changelog omitted.

Patch 1 hasn't been touched since last version; I just included
everybody's tag.

Patch 2 bases on patch 6 v1 of [2], with comments and commit log slightly
changed. We also need rtnl_dereference() to load ->qdisc_sleeping since
commit d636fc5dd692 ("net: sched: add rcu annotations around
qdisc->qdisc_sleeping"), so I changed that; please take yet another look,
thanks!

Patch 2 has been tested with the new reproducer Pedro posted [3].

[1] https://syzkaller.appspot.com/bug?extid=b53a9c0d1ea4ad62da8b
[2] https://lore.kernel.org/r/cover.1684887977.git.peilin.ye@bytedance.com/
[3] https://lore.kernel.org/r/7879f218-c712-e9cc-57ba-665990f5f4c9@mojatatu.com/
====================

Link: https://lore.kernel.org/r/cover.1686355297.git.peilin.ye@bytedance.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: qdisc_destroy() old ingress and clsact Qdiscs before grafting

mini_Qdisc_pair::p_miniq is a double pointer to mini_Qdisc, initialized
in ingress_init() to point to net_device::miniq_ingress.  ingress Qdiscs
access this per-net_device pointer in mini_qdisc_pair_swap().  Similar
for clsact Qdiscs and miniq_egress.

Unfortunately, after introducing RTNL-unlocked RTM_{NEW,DEL,GET}TFILTER
requests (thanks Hillf Danton for the hint), when replacing ingress or
clsact Qdiscs, for example, the old Qdisc ("@old") could access the same
miniq_{in,e}gress pointer(s) concurrently with the new Qdisc ("@new"),
causing race conditions [1] including a use-after-free bug in
mini_qdisc_pair_swap() reported by syzbot:

BUG: KASAN: slab-use-after-free in mini_qdisc_pair_swap+0x1c2/0x1f0 net/sched/sch_generic.c:1573
Write of size 8 at addr ffff888045b31308 by task syz-executor690/14901
...
Call Trace:
  <TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
  print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:319
  print_report mm/kasan/report.c:430 [inline]
  kasan_report+0x11c/0x130 mm/kasan/report.c:536
  mini_qdisc_pair_swap+0x1c2/0x1f0 net/sched/sch_generic.c:1573
  tcf_chain_head_change_item net/sched/cls_api.c:495 [inline]
  tcf_chain0_head_change.isra.0+0xb9/0x120 net/sched/cls_api.c:509
  tcf_chain_tp_insert net/sched/cls_api.c:1826 [inline]
  tcf_chain_tp_insert_unique net/sched/cls_api.c:1875 [inline]
  tc_new_tfilter+0x1de6/0x2290 net/sched/cls_api.c:2266
...

@old and @new should not affect each other.  In other words, @old should
never modify miniq_{in,e}gress after @new, and @new should not update
@old's RCU state.

Fixing without changing sch_api.c turned out to be difficult (please
refer to Closes: for discussions).  Instead, make sure @new's first call
always happen after @old's last call (in {ingress,clsact}_destroy()) has
finished:

In qdisc_graft(), return -EBUSY if @old has any ongoing filter requests,
and call qdisc_destroy() for @old before grafting @new.

Introduce qdisc_refcount_dec_if_one() as the counterpart of
qdisc_refcount_inc_nz() used for filter requests.  Introduce a
non-static version of qdisc_destroy() that does a TCQ_F_BUILTIN check,
just like qdisc_put() etc.

Depends on patch "net/sched: Refactor qdisc_graft() for ingress and
clsact Qdiscs".

[1] To illustrate, the syzkaller reproducer adds ingress Qdiscs under
TC_H_ROOT (no longer possible after commit c7cfbd115001 ("net/sched:
sch_ingress: Only create under TC_H_INGRESS")) on eth0 that has 8
transmission queues:

  Thread 1 creates ingress Qdisc A (containing mini Qdisc a1 and a2),
  then adds a flower filter X to A.

  Thread 2 creates another ingress Qdisc B (containing mini Qdisc b1 and
  b2) to replace A, then adds a flower filter Y to B.

Thread 1               A's refcnt   Thread 2
  RTM_NEWQDISC (A, RTNL-locked)
   qdisc_create(A)               1
   qdisc_graft(A)                9

  RTM_NEWTFILTER (X, RTNL-unlocked)
   __tcf_qdisc_find(A)          10
   tcf_chain0_head_change(A)
   mini_qdisc_pair_swap(A) (1st)
            |
            |                         RTM_NEWQDISC (B, RTNL-locked)
         RCU sync                2     qdisc_graft(B)
            |                    1     notify_and_destroy(A)
            |
   tcf_block_release(A)          0    RTM_NEWTFILTER (Y, RTNL-unlocked)
   qdisc_destroy(A)                    tcf_chain0_head_change(B)
   tcf_chain0_head_change_cb_del(A)    mini_qdisc_pair_swap(B) (2nd)
   mini_qdisc_pair_swap(A) (3rd)                |
           ...                                 ...

Here, B calls mini_qdisc_pair_swap(), pointing eth0->miniq_ingress to
its mini Qdisc, b1.  Then, A calls mini_qdisc_pair_swap() again during
ingress_destroy(), setting eth0->miniq_ingress to NULL, so ingress
packets on eth0 will not find filter Y in sch_handle_ingress().

This is just one of the possible consequences of concurrently accessing
miniq_{in,e}gress pointers.

Fixes: 7a096d579e8e ("net: sched: ingress: set 'unlocked' flag for Qdisc ops")
Fixes: 87f373921c4e ("net: sched: ingress: set 'unlocked' flag for clsact Qdisc ops")
Reported-by: syzbot+b53a9c0d1ea4ad62da8b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/0000000000006cf87705f79acf1a@google.com/
Cc: Hillf Danton <hdanton@sina.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: Refactor qdisc_graft() for ingress and clsact Qdiscs

Grafting ingress and clsact Qdiscs does not need a for-loop in
qdisc_graft(). Refactor it. No functional changes intended.

Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: act_ct: Fix promotion of offloaded unreplied tuple

Currently UNREPLIED and UNASSURED connections are added to the nf flow
table. This causes the following connection packets to be processed
by the flow table which then skips conntrack_in(), and thus such the
connections will remain UNREPLIED and UNASSURED even if reply traffic
is then seen. Even still, the unoffloaded reply packets are the ones
triggering hardware update from new to established state, and if
there aren't any to triger an update and/or previous update was
missed, hardware can get out of sync with sw and still mark
packets as new.

Fix the above by:
1) Not skipping conntrack_in() for UNASSURED packets, but still
   refresh for hardware, as before the cited patch.
2) Try and force a refresh by reply-direction packets that update
   the hardware rules from new to established state.
3) Remove any bidirectional flows that didn't failed to update in
   hardware for re-insertion as bidrectional once any new packet
   arrives.

Fixes: 6a9bad0069cf ("net/sched: act_ct: offload UDP NEW connections")
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/1686313379-117663-1-git-send-email-paulb@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'fix-small-bugs-and-annoyances-in-tc-testing'

Vlad Buslov says:

====================
Fix small bugs and annoyances in tc-testing
====================

Link: https://lore.kernel.org/r/20230612075712.2861848-1-vladbu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/tc-testing: Remove configs that no longer exist

Some qdiscs and classifiers have recently been retired from kernel.
However, tc-testing config is still cluttered with them which causes noise
when using merge_config.sh script to update existing config for tc-testing
compatibility. Remove the config settings for affected qdiscs and
classifiers.

Fixes: fb38306ceb9e ("net/sched: Retire ATM qdisc")
Fixes: 051d44209842 ("net/sched: Retire CBQ qdisc")
Fixes: bbe77c14ee61 ("net/sched: Retire dsmark qdisc")
Fixes: 265b4da82dbf ("net/sched: Retire rsvp classifier")
Fixes: 8c710f75256b ("net/sched: Retire tcindex classifier")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/tc-testing: Fix SFB db test

Setting very small value of db like 10ms introduces rounding errors when
converting to/from jiffies on some kernel configs. For example, on 250hz
the actual value will be set to 12ms which causes the test to fail:

# $ sudo ./tdc.py  -d eth2 -e 3410
#  -- ns/SubPlugin.__init__
# Test 3410: Create SFB with db setting
#
# All test results:
#
# 1..1
# not ok 1 3410 - Create SFB with db setting
#         Could not match regex pattern. Verify command output:
# qdisc sfb 1: root refcnt 2 rehash 600s db 12ms limit 1000p max 25p target 20p increment 0.000503548 decrement 4.57771e-05 penalty_rate 10pps penalty_burst 20p

Set the value to 100ms instead which currently seem to work on 100hz,
250hz, 300hz and 1000hz kernel configs.

Fixes: 6ad92dc56fca ("selftests/tc-testing: add selftests for sfb qdisc")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/tc-testing: Fix Error: failed to find target LOG

Add missing netfilter config dependency.

Fixes following example error when running tests via tdc.sh for all XT
tests:

# $ sudo ./tdc.py -d eth2 -e 2029
# Test 2029: Add xt action with log-prefix
# exit: 255
# exit: 0
#  failed to find target LOG
#
# bad action parsing
# parse_action: bad value (7:xt)!
# Illegal "action"
#
# -----> teardown stage *** Could not execute: "$TC actions flush action xt"
#
# -----> teardown stage *** Error message: "Error: Cannot flush unknown TC action.
# We have an error flushing
# "
# returncode 1; expected [0]
#
# -----> teardown stage *** Aborting test run.
#
# <_io.BufferedReader name=3> *** stdout ***
#
# <_io.BufferedReader name=5> *** stderr ***
# "-----> teardown stage" did not complete successfully
# Exception <class '__main__.PluginMgrTestFail'> ('teardown', ' failed to find target LOG\n\nbad action parsing\nparse_action: bad value (7:xt)!\nIllegal "action"\n', '"-----> teardown stage" did not complete successfully') (caught in test_runner, running test 2 2029 Add xt action with log-prefix stage teardown)
# ---------------
# traceback
#   File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 495, in test_runner
#     res = run_one_test(pm, args, index, tidx)
#   File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 434, in run_one_test
#     prepare_env(args, pm, 'teardown', '-----> teardown stage', tidx['teardown'], procout)
#   File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 245, in prepare_env
#     raise PluginMgrTestFail(
# ---------------
# accumulated output for this test:
#  failed to find target LOG
#
# bad action parsing
# parse_action: bad value (7:xt)!
# Illegal "action"
#
# ---------------
#
# All test results:
#
# 1..1
# ok 1 2029 - Add xt action with log-prefix # skipped - "-----> teardown stage" did not complete successfully

Fixes: 910d504bc187 ("selftests/tc-testings: add selftests for xt action")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/tc-testing: Fix Error: Specified qdisc kind is unknown.

All TEQL tests assume that sch_teql module is loaded. Load module in tdc.sh
before running qdisc tests.

Fixes following example error when running tests via tdc.sh for all TEQL
tests:

# $ sudo ./tdc.py -d eth2 -e 84a0
#  -- ns/SubPlugin.__init__
# Test 84a0: Create TEQL with default setting
# exit: 2
# exit: 0
# Error: Specified qdisc kind is unknown.
#
# -----> teardown stage *** Could not execute: "$TC qdisc del dev $DUMMY handle 1: root"
#
# -----> teardown stage *** Error message: "Error: Invalid handle.
# "
# returncode 2; expected [0]
#
# -----> teardown stage *** Aborting test run.
#
# <_io.BufferedReader name=3> *** stdout ***
#
# <_io.BufferedReader name=5> *** stderr ***
# "-----> teardown stage" did not complete successfully
# Exception <class '__main__.PluginMgrTestFail'> ('teardown', 'Error: Specified qdisc kind is unknown.\n', '"-----> teardown stage" did not complete successfully') (caught in test_runner, running test 2 84a0 Create TEQL with default setting stage teardown)
# ---------------
# traceback
#   File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 495, in test_runner
#     res = run_one_test(pm, args, index, tidx)
#   File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 434, in run_one_test
#     prepare_env(args, pm, 'teardown', '-----> teardown stage', tidx['teardown'], procout)
#   File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 245, in prepare_env
#     raise PluginMgrTestFail(
# ---------------
# accumulated output for this test:
# Error: Specified qdisc kind is unknown.
#
# ---------------
#
# All test results:
#
# 1..1
# ok 1 84a0 - Create TEQL with default setting # skipped - "-----> teardown stage" did not complete successfully

Fixes: cc62fbe114c9 ("selftests/tc-testing: add selftests for teql qdisc")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ethernet: ti: am65-cpsw: Call of_node_put() on error path

This code returns directly but it should instead call of_node_put()
to drop some reference counts.

Fixes: dab2b265dd23 ("net: ethernet: ti: am65-cpsw: Add support for SERDES configuration")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/e3012f0c-1621-40e6-bf7d-03c276f6e07f@kili.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mptcp-fixes'

Matthieu Baerts says:

====================
selftests: mptcp: skip tests not supported by old kernels (part 3)

After a few years of increasing test coverage in the MPTCP selftests, we
realised [1] the last version of the selftests is supposed to run on old
kernels without issues.

Supporting older versions is not that easy for this MPTCP case: these
selftests are often validating the internals by checking packets that
are exchanged, when some MIB counters are incremented after some
actions, how connections are getting opened and closed in some cases,
etc. In other words, it is not limited to the socket interface between
the userspace and the kernelspace.

In addition to that, the current MPTCP selftests run a lot of different
sub-tests but the TAP13 protocol used in the selftests don't support
sub-tests: one failure in sub-tests implies that the whole selftest is
seen as failed at the end because sub-tests are not tracked. It is then
important to skip sub-tests not supported by old kernels.

To minimise the modifications and reduce the complexity to support old
versions, the idea is to look at external signs and skip the whole
selftest or just some sub-tests before starting them. This cannot be
applied in all cases.

Similar to the second part, this third one focuses on marking different
sub-tests as skipped if some MPTCP features are not supported. This
time, only in "mptcp_join.sh" selftest, the remaining one, is modified.
Several techniques are used here to achieve this task:

- Before starting some tests:

  - Check if a file (sysctl knob) is present: that's what patch 12/17 is
    doing for the userspace PM feature.

  - Check if a required kernel symbol is present in /proc/kallsyms:
    patches 9, 10, 14 and 15/17 are using this technique.

  - Check if it is possible to setup a particular network environment
    requiring Netfilter or TC: if the preparation step fail, the linked
    sub-test is marked as skipped. Patch 5/17 is doing that.

  - Check if a MIB counter is available: patches 7 and 13/17 do that.

  - Check if the kernel version is newer than a specific one: patch 1/17
    adds some helpers in mptcp_lib.sh to ease its use. That's not ideal
    and it is only used as last resort but as mentioned above, it is
    important to skip tests if they are not supported not to have the
    whole selftest always being marked as failed on old kernels. Patches
    11 and 17/17 are checking the kernel version. An alternative would
    be to ignore the results for some sub-tests but that's not ideal
    too. Note that SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK env var can be
    set to 1 not to skip these tests if the running kernel doesn't have
    a supported version.

- After having launched the tests:

  - Adapt the expectations depending on the presence of a kernel symbol
    (patch 6/17) or a kernel version (patch 8/17).

  - Check is a MIB counter is available and skip the verification if
    not. Patch 4/17 is using this technique.

Before skipping tests, SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var
value is checked: if it is set to 1, the test is marked as "failed"
instead of "skipped". MPTCP public CI expects to have all features
supported and it sets this env var to 1 to catch regressions in these
new checks.

Patch 2/17 uses 'iptables-legacy' if available because it might be
needed when using an older kernel not supporting iptables-nft.

Patch 3/17 adds some helpers used in the other patches mentioned to
easily mark sub-tests as skipped.

Patch 16/17 uniforms MPTCP Join "listener" tests: it was imported code
from userspace_pm.sh but without using the "code style" and ways of
using tools and printing messages from MPTCP Join selftest.

Link: https://lore.kernel.org/stable/CA+G9fYtDGpgT4dckXD-y-N92nqUxuvue_7AtDdBcHrbOMsDZLg@mail.gmail.com/
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
====================

Link: https://lore.kernel.org/r/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip mixed tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of a mix of subflows in v4 and v6 by the
in-kernel PM introduced by commit b9d69db87fb7 ("mptcp: let the
in-kernel PM use mixed IPv4 and IPv6 addresses").

It looks like there is no external sign we can use to predict the
expected behaviour. Instead of accepting different behaviours and thus
not really checking for the expected behaviour, we are looking here for
a specific kernel version. That's not ideal but it looks better than
removing the test because it cannot support older kernel versions.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ad3493746ebe ("selftests: mptcp: add test-cases for mixed v4/v6 subflows")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: uniform listener tests

The alignment was different from the other tests because tabs were used
instead of spaces.

While at it, also use 'echo' instead of 'printf' to print the result to
keep the same style as done in the other sub-tests. And, even if it
should be better with, also remove 'stdbuf' and sed's '--unbuffered'
option because they are not used in the other subtests and they are not
available when using a minimal environment with busybox.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip PM listener tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of PM listener events introduced by commit
f8c9dfbd875b ("mptcp: add pm listener events").

It is possible to look for "mptcp_event_pm_listener" in kallsyms to know
in advance if the kernel supports this feature.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip MPC backups tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of sending an MP_PRIO signal for the initial
subflow, introduced by commit c157bbe776b7 ("mptcp: allow the in kernel
PM to set MPC subflow priority").

It is possible to look for "mptcp_subflow_send_ack" in kallsyms because
it was needed to introduce the mentioned feature. So we can know in
advance if the feature is supported instead of trying and accepting any
results.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 914f6a59b10f ("selftests: mptcp: add MPC backup tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip fail tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of the MP_FAIL / infinite mapping introduced
by commit 1e39e5a32ad7 ("mptcp: infinite mapping sending") and the
following ones.

It is possible to look for one of the infinite mapping counters to know
in advance if the this feature is available.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b6e074e171bc ("selftests: mptcp: add infinite map testcase")
Cc: stable@vger.kernel.org
Fixes: 2ba18161d407 ("selftests: mptcp: add MP_FAIL reset testcase")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip userspace PM tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of the userspace PM introduced by commit
4638de5aefe5 ("mptcp: handle local addrs announced by userspace PMs")
and the following ones.

It is possible to look for the MPTCP pm_type's sysctl knob to know in
advance if the userspace PM is available.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 5ac1d2d63451 ("selftests: mptcp: Add tests for userspace PM type")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip fullmesh flag tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of the fullmesh flag for the in-kernel PM
introduced by commit 2843ff6f36db ("mptcp: remote addresses fullmesh")
and commit 1a0d6136c5f0 ("mptcp: local addresses fullmesh").

It looks like there is no easy external sign we can use to predict the
expected behaviour. We could add the flag and then check if it has been
added but for that, and for each fullmesh test, we would need to setup a
new environment, do the checks, clean it and then only start the test
from yet another clean environment. To keep it simple and avoid
introducing new issues, we look for a specific kernel version. That's
not ideal but an acceptable solution for this case.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 6a0653b96f5d ("selftests: mptcp: add fullmesh setting tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip backup if set flag on ID not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

Commit bccefb762439 ("selftests: mptcp: simplify pm_nl_change_endpoint")
has simplified the way the backup flag is set on an endpoint. Instead of
doing:

./pm_nl_ctl set 10.0.2.1 flags backup

Now we do:

./pm_nl_ctl set id 1 flags backup

The new way is easier to maintain but it is also incompatible with older
kernels not supporting the implicit endpoints putting in place the
infrastructure to set flags per ID, hence the second Fixes tag.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: bccefb762439 ("selftests: mptcp: simplify pm_nl_change_endpoint")
Cc: stable@vger.kernel.org
Fixes: 4cf86ae84c71 ("mptcp: strict local address ID selection")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip implicit tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of the implicit endpoints introduced by
commit d045b9eb95a9 ("mptcp: introduce implicit endpoints").

It is possible to look for "mptcp_subflow_send_ack" in kallsyms because
it was needed to introduce the mentioned feature. So we can know in
advance if the feature is supported instead of trying and accepting any
results.

Note that here and in the following commits, we re-do the same check for
each sub-test of the same function for a few reasons. The main one is
not to break the ID assign to each test in order to be able to easily
compare results between different kernel versions. Also, we can still
run a specific test even if it is skipped. Another reason is that it
makes it clear during the review that a specific subtest will be skipped
or not under certain conditions. At the end, it looks OK to call the
exact same helper multiple times: it is not a critical path and it is
the same code that is executed, not really more cases to maintain.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: support RM_ADDR for used endpoints or not

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

At some points, a new feature caused internal behaviour changes we are
verifying in the selftests, see the Fixes tag below. It was not a UAPI
change but because in these selftests, we check some internal
behaviours, it is normal we have to adapt them from time to time after
having added some features.

It looks like there is no external sign we can use to predict the
expected behaviour. Instead of accepting different behaviours and thus
not really checking for the expected behaviour, we are looking here for
a specific kernel version. That's not ideal but it looks better than
removing the test because it cannot support older kernel versions.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 6fa0174a7c86 ("mptcp: more careful RM_ADDR generation")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip Fastclose tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of MP_FASTCLOSE introduced in commit
f284c0c77321 ("mptcp: implement fastclose xmit path").

If the MIB counter is not available, the test cannot be verified and the
behaviour will not be the expected one. So we can skip the test if the
counter is missing.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 01542c9bf9ab ("selftests: mptcp: add fastclose testcase")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: support local endpoint being tracked or not

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

At some points, a new feature caused internal behaviour changes we are
verifying in the selftests, see the Fixes tag below. It was not a uAPI
change but because in these selftests, we check some internal
behaviours, it is normal we have to adapt them from time to time after
having added some features.

It is possible to look for "mptcp_pm_subflow_check_next" in kallsyms
because it was needed to introduce the mentioned feature. So we can know
in advance what the behaviour we are expecting here instead of
supporting the two behaviours.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip test if iptables/tc cmds fail

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

Some tests are using IPTables and/or TC commands to force some
behaviours. If one of these commands fails -- likely because some
features are not available due to missing kernel config -- we should
intercept the error and skip the tests requiring these features.

Note that if we expect to have these features available and if
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests
will be marked as failed instead of skipped.

This patch also replaces the 'exit 1' by 'return 1' not to stop the
selftest in the middle without the conclusion if there is an issue with
NF or TC.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip check if MIB counter not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the MPTCP MIB counters introduced in commit fc518953bc9c
("mptcp: add and use MIB counter infrastructure") and more later. The
MPTCP Join selftest heavily relies on these counters.

If a counter is not supported by the kernel, it is not displayed when
using 'nstat -z'. We can then detect that and skip the verification. A
new helper (get_counter()) has been added to do the required checks and
return an error if the counter is not available.

Note that if we expect to have these features available and if
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests
will be marked as failed instead of skipped.

This new helper also makes sure we get the exact counter we want to
avoid issues we had in the past, e.g. with MPTcpExtRmAddr and
MPTcpExtRmAddrDrop sharing the same prefix. While at it, we uniform the
way we fetch a MIB counter.

Note for the backports: we rarely change these modified blocks so if
there is are conflicts, it is very likely because a counter is not used
in the older kernels and we don't need that chunk.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: helpers to skip tests

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

Here are some helpers that will be used to mark subtests as skipped if a
feature is not supported. Marking as a fix for the commit introducing
this selftest to help with the backports.

While at it, also check if kallsyms feature is available as it will also
be used in the following commits to check if MPTCP features are
available before starting a test.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: use 'iptables-legacy' if available

IPTables commands using 'iptables-nft' fail on old kernels, at least
5.15 because it doesn't see the default IPTables chains:

$ iptables -L
iptables/1.8.2 Failed to initialize nft: Protocol not supported

As a first step before switching to NFTables, we can use iptables-legacy
if available.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: lib: skip if not below kernel version

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

A new function is now available to easily detect if a feature is
missing by looking at the kernel version. That's clearly not ideal and
this kind of check should be avoided as soon as possible. But sometimes,
there are no external sign that a "feature" is available or not:
internal behaviours can change without modifying the uAPI and these
selftests are verifying the internal behaviours. Sometimes, the only
(easy) way to verify if the feature is present is to run the test but
then the validation cannot determine if there is a failure with the
feature or if the feature is missing. Then it looks better to check the
kernel version instead of having tests that can never fail. In any case,
we need a solution not to have a whole selftest being marked as failed
just because one sub-test has failed.

Note that this env var car be set to 1 not to do such check and run the
linked sub-test: SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK.

This new helper is going to be used in the following commits. In order
to ease the backport of such future patches, it would be good if this
patch is backported up to the introduction of MPTCP selftests, hence the
Fixes tag below: this type of check was supposed to be done from the
beginning.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'fixes-for-q-usgmii-speeds-and-autoneg'

Maxime Chevallier says:

====================
fixes for Q-USGMII speeds and autoneg

This is the second version of a small changeset for QUSGMII support,
fixing inconsistencies in reported max speed and control word parsing.

As reported here [1], there are some inconsistencies for the Q-USGMII
mode speeds and configuration. The first patch in this fixup series
makes so that we correctly report the max speed of 1Gbps for this mode.

The second patch uses a dedicated helper to decode the control word.
This is necessary as although USGMII control words are close to USXGMII,
they don't support the same speeds.

[1] : https://lore.kernel.org/netdev/ZHnd+6FUO77XFJvQ@shell.armlinux.org.uk/
====================

Link: https://lore.kernel.org/r/20230609080305.546028-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phylink: use a dedicated helper to parse usgmii control word

Q-USGMII is a derivative of USGMII, that uses a specific formatting for
the control word. The layout is close to the USXGMII control word, but
doesn't support speeds over 1Gbps. Use a dedicated decoding logic for
the USGMII control word, re-using USXGMII definitions but only considering
10/100/1000Mbps speeds

Fixes: 5e61fe157a27 ("net: phy: Introduce QUSGMII PHY mode")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phylink: report correct max speed for QUSGMII

Q-USGMII is the quad port version of USGMII, and supports a max speed of
1Gbps on each line. Make so that phylink_interface_max_speed() reports
this information correctly.

Fixes: ae0e4bb2a0e0 ("net: phylink: Adjust link settings based on rate matching")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sctp: fix an error code in sctp_sf_eat_auth()

The sctp_sf_eat_auth() function is supposed to enum sctp_disposition
values and returning a kernel error code will cause issues in the
caller. Change -ENOMEM to SCTP_DISPOSITION_NOMEM.

Fixes: 65b07e5d0d09 ("[SCTP]: API updates to suport SCTP-AUTH extensions.")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: handle invalid error codes without calling BUG()

The sctp_sf_eat_auth() function is supposed to return enum sctp_disposition
values but if the call to sctp_ulpevent_make_authkey() fails, it returns
-ENOMEM.

This results in calling BUG() inside the sctp_side_effects() function.
Calling BUG() is an over reaction and not helpful. Call WARN_ON_ONCE()
instead.

This code predates git.

Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipvlan: fix bound dev checking for IPv6 l3s mode

The commit 59a0b022aa24 ("ipvlan: Make skb->skb_iif track skb->dev for l3s
mode") fixed ipvlan bonded dev checking by updating skb skb_iif. This fix
works for IPv4, as in raw_v4_input() the dif is from inet_iif(skb), which
is skb->skb_iif when there is no route.

But for IPv6, the fix is not enough, because in ipv6_raw_deliver() ->
raw_v6_match(), the dif is inet6_iif(skb), which is returns IP6CB(skb)->iif
instead of skb->skb_iif if it's not a l3_slave. To fix the IPv6 part
issue. Let's set IP6CB(skb)->iif to correct ifindex.

BTW, ipvlan handles NS/NA specifically. Since it works fine, I will not
reset IP6CB(skb)->iif when addr->atype is IPVL_ICMPV6.

Fixes: c675e06a98a4 ("ipvlan: decouple l3s mode dependencies from other modes")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2196710
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethtool: correct MAX attribute value for stats

When compiling YNL generated code compiler complains about
array-initializer-out-of-bounds. Turns out the MAX value
for STATS_GRP uses the value for STATS.

This may lead to random corruptions in user space (kernel
itself doesn't use this value as it never parses stats).

Fixes: f09ea6fb1272 ("ethtool: add a new command for reading standard stats")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: fix page fault following EEH recovery

In the last step of the EEH recovery process, the EEH driver calls into
bnx2x_io_resume() to re-initialize the NIC hardware via the function
bnx2x_nic_load().  If an error occurs during bnx2x_nic_load(), OS and
hardware resources are released and an error code is returned to the
caller.  When called from bnx2x_io_resume(), the return code is ignored
and the network interface is brought up unconditionally.  Later attempts
to send a packet via this interface result in a page fault due to a null
pointer reference.

This patch checks the return code of bnx2x_nic_load(), prints an error
message if necessary, and does not enable the interface.

Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'nf-23-06-08' of git://git./linux/kernel/git/netfilter/nf

netfilter pull request 23-06-08

Pablo Neira Ayuso says:

====================
The following patchset contains Netfilter fixes for net:

1) Add commit and abort set operation to pipapo set abort path.

2) Bail out immediately in case of ENOMEM in nfnetlink batch.

3) Incorrect error path handling when creating a new rule leads to
dangling pointer in set transaction list.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

netlabel: fix shift wrapping bug in netlbl_catmap_setlong()

There is a shift wrapping bug in this code on 32-bit architectures.
NETLBL_CATMAP_MAPTYPE is u64, bitmap is unsigned long.
Every second 32-bit word of catmap becomes corrupted.

Signed-off-by: Dmitry Mastykin <dmastykin@astralinux.ru>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'octeontx2-af-fixes'

Naveen Mamindlapalli says:

====================
RVU NIX AF driver fixes

This patch series contains few fixes to the RVU NIX AF driver.

The first patch modifies the driver check to validate whether the req count
for contiguous and non-contiguous arrays is less than the maximum limit.

The second patch fixes HW lbk interface link credit programming.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-af: fix lbk link credits on cn10k

Fix LBK link credits on CN10K to be same as CN9K i.e
16 * MAX_LBK_DATA_RATE instead of current scheme of
calculation based on LBK buf length / FIFO size.

Fixes: 6e54e1c5399a ("octeontx2-af: cn10K: Add MTU configuration")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-af: fixed resource availability check

txschq_alloc response have two different arrays to store continuous
and non-continuous schedulers of each level. Requested count should
be checked for each array separately.

Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology")
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-06-08 (ice)

This series contains updates to ice driver only.

Simon Horman stops null pointer dereference for GNSS error path.

Kamil fixes memory leak when downing interface when XDP is enabled.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix XDP memory leak when NIC is brought up and down
ice: Don't dereference NULL in ice_gnss_read error path
====================

Link: https://lore.kernel.org/r/20230608200051.451752-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

iavf: remove mask from iavf_irq_enable_queues()

Enable more than 32 IRQs by removing the u32 bit mask in
iavf_irq_enable_queues(). There is no need for the mask as there are no
callers that select individual IRQs through the bitmask. Also, if the PF
allocates more than 32 IRQs, this mask will prevent us from using all of
them.

Modify the comment in iavf_register.h to show that the maximum number
allowed for the IRQ index is 63 as per the iAVF standard 1.0 [1].

link: [1] https://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/ethernet-adaptive-virtual-function-hardware-spec.pdf
Fixes: 5eae00c57f5e ("i40evf: main driver core")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230608200226.451861-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'selftests-mptcp-skip-tests-not-supported-by-old-kernels-part-2'

Matthieu Baerts says:

====================
selftests: mptcp: skip tests not supported by old kernels (part 2)

After a few years of increasing test coverage in the MPTCP selftests, we
realised [1] the last version of the selftests is supposed to run on old
kernels without issues.

Supporting older versions is not that easy for this MPTCP case: these
selftests are often validating the internals by checking packets that
are exchanged, when some MIB counters are incremented after some
actions, how connections are getting opened and closed in some cases,
etc. In other words, it is not limited to the socket interface between
the userspace and the kernelspace.

In addition to that, the current MPTCP selftests run a lot of different
sub-tests but the TAP13 protocol used in the selftests don't support
sub-tests: one failure in sub-tests implies that the whole selftest is
seen as failed at the end because sub-tests are not tracked. It is then
important to skip sub-tests not supported by old kernels.

To minimise the modifications and reduce the complexity to support old
versions, the idea is to look at external signs and skip the whole
selftests or just some sub-tests before starting them. This cannot be
applied in all cases.

This second part focuses on marking different sub-tests as skipped if
some MPTCP features are not supported. A few techniques are used here:

- Before starting some tests:

  - Check if a file (sysctl knob) is present: that's what patch 13/14 is
    doing for the userspace PM feature.

  - Check if a symbol is present in /proc/kallsyms: patch 1/14 adds some
    helpers in mptcp_lib.sh to ease its use. Then these helpers are used
    in patches 2, 3, 4, 10, 11 and 14/14.

  - Set a flag and get the status to check if a feature is supported:
    patch 8/14 is doing that with the 'fullmesh' flag.

- After having launched the tests:

  - Retrieve the counters after a test and check if they are different
    than 0. Similar to the check with the flag, that's not ideal but in
    this case, the counters were already present before the introduction
    of MPTCP but they have been supported by MPTCP sockets only later.
    Patches 5 and 6/14 are using this technique.

Before skipping tests, SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var
value is checked: if it is set to 1, the test is marked as "failed"
instead of "skipped". MPTCP public CI expects to have all features
supported and it sets this env var to 1 to catch regressions in these
new checks.

Patches 7/14 and 9/14 are a bit different because they don't skip tests:

- Patch 7/14 retrieves the default values instead of using hardcoded
  ones because these default values have been modified at some points.
  Then the comparisons are done with the default values.

- patch 9/14 relaxes the expected returned size from MPTCP's getsockopt
  because the different structures gathering various info can get new
  fields and get bigger over time. We cannot expect that the userspace
  is using the same structure as the kernel.

Patch 12/14 marks the test as "skipped" instead of "failed" if the "ip"
tool is not available.

In this second part, the "mptcp_join" selftest is not modified yet. This
will come soon after in the third part with quite a few patches.

Link: https://lore.kernel.org/stable/CA+G9fYtDGpgT4dckXD-y-N92nqUxuvue_7AtDdBcHrbOMsDZLg@mail.gmail.com/
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
====================

Link: https://lore.kernel.org/r/20230608-upstream-net-20230608-mptcp-selftests-support-old-kernels-part-2-v1-0-20997a6fd841@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: userspace pm: skip PM listener events tests if unavailable

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the new listener events linked to the path-manager
introduced by commit f8c9dfbd875b ("mptcp: add pm listener events").

It is possible to look for "mptcp_event_pm_listener" in kallsyms to know
in advance if the kernel supports this feature and skip these sub-tests
if the feature is not supported.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 6c73008aa301 ("selftests: mptcp: listener test for userspace PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: userspace pm: skip if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the MPTCP Userspace PM introduced by commit 4638de5aefe5
("mptcp: handle local addrs announced by userspace PMs").

We can skip all these tests if the feature is not supported simply by
looking for the MPTCP pm_type's sysctl knob.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 259a834fadda ("selftests: mptcp: functional tests for the userspace PM type")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: userspace pm: skip if 'ip' tool is unavailable

When a required tool is missing, the return code 4 (SKIP) should be
returned instead of 1 (FAIL).

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 259a834fadda ("selftests: mptcp: functional tests for the userspace PM type")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: sockopt: skip TCP_INQ checks if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is TCP_INQ cmsg support introduced in commit 2c9e77659a0c
("mptcp: add TCP_INQ cmsg support").

It is possible to look for "mptcp_ioctl" in kallsyms because it was
needed to introduce the mentioned feature. We can skip these tests and
not set TCPINQ option if the feature is not supported.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 5cbd886ce2a9 ("selftests: mptcp: add TCP_INQ support")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: sockopt: skip getsockopt checks if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP
connections introduced by commit 55c42fa7fa33 ("mptcp: add MPTCP_INFO
getsockopt") and the following ones.

It is possible to look for "mptcp_diag_fill_info" in kallsyms because
it is introduced by the mentioned feature. So we can know in advance if
the feature is supported and skip the sub-test if not.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ce9979129a0b ("selftests: mptcp: add mptcp getsockopt test cases")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: sockopt: relax expected returned size

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP
connections introduced by commit 55c42fa7fa33 ("mptcp: add MPTCP_INFO
getsockopt") and the following ones.

We cannot guess in advance which sizes the kernel will returned: older
kernel can returned smaller sizes, e.g. recently the tcp_info structure
has been modified in commit 71fc704768f6 ("tcp: add rcv_wnd and
plb_rehash to TCP_INFO") where a new field has been added.

The userspace can also expect a smaller size if it is compiled with old
uAPI kernel headers.

So for these sizes, we can only check if they are above a certain
threshold, 0 for the moment. We can also only compared sizes with the
ones set by the kernel.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ce9979129a0b ("selftests: mptcp: add mptcp getsockopt test cases")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: pm nl: skip fullmesh flag checks if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the fullmesh flag that can be given to the MPTCP
in-kernel path-manager and introduced in commit 2843ff6f36db ("mptcp:
remote addresses fullmesh").

If the flag is not visible in the dump after having set it, we don't
check the content. Note that if we expect to have this feature and
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, we always
check the content to avoid regressions.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 6da1dfdd037e ("selftests: mptcp: add set_flags tests in pm_netlink.sh")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: pm nl: remove hardcoded default limits

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the checks of the default limits returned by the MPTCP
in-kernel path-manager. The default values have been modified by commit
72bcbc46a5c3 ("mptcp: increase default max additional subflows to 2").
Instead of comparing with hardcoded values, we can get the default one
and compare with them.

Note that if we expect to have the latest version, we continue to check
the hardcoded values to avoid unexpected behaviour changes.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: eedbc685321b ("selftests: add PM netlink functional tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: diag: skip inuse tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the reporting of the MPTCP sockets being used, introduced
by commit c558246ee73e ("mptcp: add statistics for mptcp socket in use").

Similar to the parent commit, it looks like there is no good pre-check
to do here, i.e. dedicated function available in kallsyms. Instead, we
try to get info and if nothing is returned, the test is marked as
skipped.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: e04a30f78809 ("selftest: mptcp: add test for mptcp socket in use")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: diag: skip listen tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the listen diag dump support introduced by
commit 4fa39b701ce9 ("mptcp: listen diag dump support").

It looks like there is no good pre-check to do here, i.e. dedicated
function available in kallsyms. Instead, we try to get info if nothing
is returned, the test is marked as skipped.

That's not ideal because something could be wrong with the feature and
instead of reporting an error, the test could be marked as skipped. If
we know in advanced that the feature is supposed to be supported, the
tester can set SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var to 1: in
this case the test will report an error instead of marking the test as
skipped if nothing is returned.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: f2ae0fa68e28 ("selftests/mptcp: add diag listen tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: connect: skip TFO tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of TCP_FASTOPEN socket option with MPTCP
connections introduced by commit 4ffb0a02346c ("mptcp: add TCP_FASTOPEN
sock option").

It is possible to look for "mptcp_fastopen_" in kallsyms to know if the
feature is supported or not.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ca7ae8916043 ("selftests: mptcp: mptfo Initiator/Listener")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: connect: skip disconnect tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the full support of disconnections from the userspace
introduced by commit b29fcfb54cd7 ("mptcp: full disconnect
implementation").

It is possible to look for "mptcp_pm_data_reset" in kallsyms because a
preparation patch added it to ease the introduction of the mentioned
feature.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: connect: skip transp tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of IP(V6)_TRANSPARENT socket option with
MPTCP connections introduced by commit c9406a23c116 ("mptcp: sockopt:
add SOL_IP freebind & transparent options").

It is possible to look for "__ip_sock_set_tos" in kallsyms because
IP(V6)_TRANSPARENT socket option support has been added after TOS
support which came with the required infrastructure in MPTCP sockopt
code. To support TOS, the following function has been exported (T). Not
great but better than checking for a specific kernel version.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 5fb62e9cd3ad ("selftests: mptcp: add tproxy test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: lib: skip if missing symbol

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

New functions are now available to easily detect if a certain feature is
missing by looking at kallsyms.

These new helpers are going to be used in the following commits. In
order to ease the backport of such future patches, it would be good if
this patch is backported up to the introduction of MPTCP selftests,
hence the Fixes tag below: this type of check was supposed to be done
from the beginning.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: cls_u32: Fix reference counter leak leading to overflow

In the event of a failure in tcf_change_indev(), u32_set_parms() will
immediately return without decrementing the recently incremented
reference counter. If this happens enough times, the counter will
rollover and the reference freed, leading to a double free which can be
used to do 'bad things'.

In order to prevent this, move the point of possible failure above the
point where the reference counter is incremented. Also save any
meaningful return values to be applied to the return data at the
appropriate point in time.

This issue was caught with KASAN.

Fixes: 705c7091262d ("net: sched: cls_u32: no need to call tcf_exts_change for newly allocated struct")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: taprio: fix slab-out-of-bounds Read in taprio_dequeue_from_txq

As shown in [1], out-of-bounds access occurs in two cases:
1)when the qdisc of the taprio type is used to replace the previously
configured taprio, count and offset in tc_to_txq can be set to 0. In this
case, the value of *txq in taprio_next_tc_txq() will increases
continuously. When the number of accessed queues exceeds the number of
queues on the device, out-of-bounds access occurs.
2)When packets are dequeued, taprio can be deleted. In this case, the tc
rule of dev is cleared. The count and offset values are also set to 0. In
this case, out-of-bounds access is also caused.

Now the restriction on the queue number is added.

[1] https://groups.google.com/g/syzkaller-bugs/c/_lYOKgkBVMg
Fixes: 2f530df76c8c ("net/sched: taprio: give higher priority to higher TCs in software dequeue mode")
Reported-by: syzbot+04afcb3d2c840447559a@syzkaller.appspotmail.com
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-af: Fix promiscuous mode

CN10KB silicon introduced a new exact match feature,
which is used for DMAC filtering. The state of installed
DMAC filters in this exact match table is getting corrupted
when promiscuous mode is toggled. Fix this by not touching
Exact match related config when promiscuous mode is toggled.

Fixes: 2dba9459d2c9 ("octeontx2-af: Wrapper functions for MAC addr add/del/update/reset")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: renesas: rswitch: Fix timestamp feature after all descriptors are used

The timestamp descriptors were intended to act cyclically. Descriptors
from index 0 through gq->ring_size - 1 contain actual information, and
the last index (gq->ring_size) should have LINKFIX to indicate
the first index 0 descriptor. However, the LINKFIX value is missing,
causing the timestamp feature to stop after all descriptors are used.
To resolve this issue, set the LINKFIX to the timestamp descritors.

Reported-by: Phong Hoang <phong.hoang.wz@renesas.com>
Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_pedit: Parse L3 Header for L4 offset

Instead of relying on skb->transport_header being set correctly, opt
instead to parse the L3 header length out of the L3 headers for both
IPv4/IPv6 when the Extended Layer Op for tcp/udp is used. This fixes a
bug if GRO is disabled, when GRO is disabled skb->transport_header is
set by __netif_receive_skb_core() to point to the L3 header, it's later
fixed by the upper protocol layers, but act_pedit will receive the SKB
before the fixups are completed. The existing behavior causes the
following to edit the L3 header if GRO is disabled instead of the UDP
header:

tc filter add dev eth0 ingress protocol ip flower ip_proto udp \
dst_ip 192.168.1.3 action pedit ex munge udp set dport 18053

Also re-introduce a rate-limited warning if we were unable to extract
the header offset when using the 'ex' interface.

Fixes: 71d0ed7079df ("net/act_pedit: Support using offset relative to
the conventional network headers")
Signed-off-by: Max Tottenham <mtottenh@akamai.com>
Reviewed-by: Josh Hunt <johunt@akamai.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305261541.N165u9TZ-lkp@intel.com/
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: qmi_wwan: add support for Compal RXM-G1

Add support for Compal RXM-G1 which is based on Qualcomm SDX55 chip.
This patch adds support for two compositions:

0x9091: DIAG + MODEM + QMI_RMNET + ADB
0x90db: DIAG + DUN + RMNET + DPL + QDSS(Trace) + ADB

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=05c6 ProdID=9091 Rev= 4.14
S:  Manufacturer=QCOM
S:  Product=SDXPRAIRIE-MTP _SN:719AB680
S:  SerialNumber=719ab680
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=84(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=05c6 ProdID=90db Rev= 4.14
S:  Manufacturer=QCOM
S:  Product=SDXPRAIRIE-MTP _SN:719AB680
S:  SerialNumber=719ab680
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=84(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=8f(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

Cc: stable@vger.kernel.org
Signed-off-by: Wes Huang <wes.huang@moxa.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20230608030141.3546-1-wes.huang@moxa.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

igb: Fix extts capture value format for 82580/i354/i350

82580/i354/i350 features circle-counter-like timestamp registers
that are different with newer i210. The EXTTS capture value in
AUXTSMPx should be converted from raw circle counter value to
timestamp value in resolution of 1 nanosec by the driver.

This issue can be reproduced on i350 nics, connecting an 1PPS
signal to a SDP pin, and run 'ts2phc' command to read external
1PPS timestamp value. On i210 this works fine, but on i350 the
extts is not correctly converted.

The i350/i354/82580's SYSTIM and other timestamp registers are
40bit counters, presenting time range of 2^40 ns, that means these
registers overflows every about 1099s. This causes all these regs
can't be used directly in contrast to the newer i210/i211s.

The igb driver needs to convert these raw register values to
valid time stamp format by using kernel timecounter apis for i350s
families. Here the igb_extts() just forgot to do the convert.

Fixes: 38970eac41db ("igb: support EXTTS on 82580/i354/i350")
Signed-off-by: Yuezhen Luan <eggcar.luan@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230607164116.3768175-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ping6: Fix send to link-local addresses with VRF.

Ping sockets can't send packets when they're bound to a VRF master
device and the output interface is set to a slave device.

For example, when net.ipv4.ping_group_range is properly set, so that
ping6 can use ping sockets, the following kind of commands fails:
  $ ip vrf exec red ping6 fe80::854:e7ff:fe88:4bf1%eth1

What happens is that sk->sk_bound_dev_if is set to the VRF master
device, but 'oif' is set to the real output device. Since both are set
but different, ping_v6_sendmsg() sees their value as inconsistent and
fails.

Fix this by allowing 'oif' to be a slave device of ->sk_bound_dev_if.

This fixes the following kselftest failure:
  $ ./fcnal-test.sh -t ipv6_ping
  [...]
  TEST: ping out, vrf device+address bind - ns-B IPv6 LLA        [FAIL]

Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/b6191f90-ffca-dbca-7d06-88a9788def9c@alu.unizg.hr/
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Fixes: 5e457896986e ("net: ipv6: Fix ping to link-local addresses.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/6c8b53108816a8d0d5705ae37bdc5a8322b5e3d9.1686153846.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: enetc: correct the indexes of highest and 2nd highest TCs

For ENETC hardware, the TCs are numbered from 0 to N-1, where N
is the number of TCs. Numerically higher TC has higher priority.
It's obvious that the highest priority TC index should be N-1 and
the 2nd highest priority TC index should be N-2.

However, the previous logic uses netdev_get_prio_tc_map() to get
the indexes of highest priority and 2nd highest priority TCs, it
does not make sense and is incorrect to give a "tc" argument to
netdev_get_prio_tc_map(). So the driver may get the wrong indexes
of the two highest priotiry TCs which would lead to failed to set
the CBS for the two highest priotiry TCs.

e.g.
$ tc qdisc add dev eno0 parent root handle 100: mqprio num_tc 6 \
map 0 0 1 1 2 3 4 5 queues 1@0 1@1 1@2 1@3 2@4 2@6 hw 1
$ tc qdisc replace dev eno0 parent 100:6 cbs idleslope 100000 \
sendslope -900000 hicredit 12 locredit -113 offload 1
$ Error: Specified device failed to setup cbs hardware offload.
^^^^^

In this example, the previous logic deems the indexes of the two
highest priotiry TCs should be 3 and 2. Actually, the indexes are
5 and 4, because the number of TCs is 6. So it would be failed to
configure the CBS for the two highest priority TCs.

Fixes: c431047c4efe ("enetc: add support Credit Based Shaper(CBS) for hardware offload")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: nf_tables: incorrect error path handling with NFT_MSG_NEWRULE

In case of error when adding a new rule that refers to an anonymous set,
deactivate expressions via NFT_TRANS_PREPARE state, not NFT_TRANS_RELEASE.
Thus, the lookup expression marks anonymous sets as inactive in the next
generation to ensure it is not reachable in this transaction anymore and
decrement the set refcount as introduced by c1592a89942e ("netfilter:
nf_tables: deactivate anonymous set from preparation phase"). The abort
step takes care of undoing the anonymous set.

This is also consistent with rule deletion, where NFT_TRANS_PREPARE is
used. Note that this error path is exercised in the preparation step of
the commit protocol. This patch replaces nf_tables_rule_release() by the
deactivate and destroy calls, this time with NFT_TRANS_PREPARE.

Due to this incorrect error handling, it is possible to access a
dangling pointer to the anonymous set that remains in the transaction
list.

[1009.379054] BUG: KASAN: use-after-free in nft_set_lookup_global+0x147/0x1a0 [nf_tables]
[1009.379106] Read of size 8 at addr ffff88816c4c8020 by task nft-rule-add/137110
[1009.379116] CPU: 7 PID: 137110 Comm: nft-rule-add Not tainted 6.4.0-rc4+ #256
[1009.379128] Call Trace:
[1009.379132]  <TASK>
[1009.379135]  dump_stack_lvl+0x33/0x50
[1009.379146]  ? nft_set_lookup_global+0x147/0x1a0 [nf_tables]
[1009.379191]  print_address_description.constprop.0+0x27/0x300
[1009.379201]  kasan_report+0x107/0x120
[1009.379210]  ? nft_set_lookup_global+0x147/0x1a0 [nf_tables]
[1009.379255]  nft_set_lookup_global+0x147/0x1a0 [nf_tables]
[1009.379302]  nft_lookup_init+0xa5/0x270 [nf_tables]
[1009.379350]  nf_tables_newrule+0x698/0xe50 [nf_tables]
[1009.379397]  ? nf_tables_rule_release+0xe0/0xe0 [nf_tables]
[1009.379441]  ? kasan_unpoison+0x23/0x50
[1009.379450]  nfnetlink_rcv_batch+0x97c/0xd90 [nfnetlink]
[1009.379470]  ? nfnetlink_rcv_msg+0x480/0x480 [nfnetlink]
[1009.379485]  ? __alloc_skb+0xb8/0x1e0
[1009.379493]  ? __alloc_skb+0xb8/0x1e0
[1009.379502]  ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[1009.379509]  ? unwind_get_return_address+0x2a/0x40
[1009.379517]  ? write_profile+0xc0/0xc0
[1009.379524]  ? avc_lookup+0x8f/0xc0
[1009.379532]  ? __rcu_read_unlock+0x43/0x60

Fixes: 958bee14d071 ("netfilter: nf_tables: use new transaction infrastructure to handle sets")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

ice: Fix XDP memory leak when NIC is brought up and down

Fix the buffer leak that occurs while switching
the port up and down with traffic and XDP by
checking for an active XDP program and freeing all empty TX buffers.

Fixes: efc2214b6047 ("ice: Add support for XDP")
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Merge tag 'net-6.4-rc6' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from can, wifi, netfilter, bluetooth and ebpf.

  Current release - regressions:

   - bpf: sockmap: avoid potential NULL dereference in
     sk_psock_verdict_data_ready()

   - wifi: iwlwifi: fix -Warray-bounds bug in iwl_mvm_wait_d3_notif()

   - phylink: actually fix ksettings_set() ethtool call

   - eth: dwmac-qcom-ethqos: fix a regression on EMAC < 3

  Current release - new code bugs:

   - wifi: mt76: fix possible NULL pointer dereference in
     mt7996_mac_write_txwi()

  Previous releases - regressions:

   - netfilter: fix NULL pointer dereference in nf_confirm_cthelper

   - wifi: rtw88/rtw89: correct PS calculation for SUPPORTS_DYNAMIC_PS

   - openvswitch: fix upcall counter access before allocation

   - bluetooth:
      - fix use-after-free in hci_remove_ltk/hci_remove_irk
      - fix l2cap_disconnect_req deadlock

   - nic: bnxt_en: prevent kernel panic when receiving unexpected
     PHC_UPDATE event

  Previous releases - always broken:

   - core: annotate rfs lockless accesses

   - sched: fq_pie: ensure reasonable TCA_FQ_PIE_QUANTUM values

   - netfilter: add null check for nla_nest_start_noflag() in
     nft_dump_basechain_hook()

   - bpf: fix UAF in task local storage

   - ipv4: ping_group_range: allow GID from 2147483648 to 4294967294

   - ipv6: rpl: fix route of death.

   - tcp: gso: really support BIG TCP

   - mptcp: fixes for user-space PM address advertisement

   - smc: avoid to access invalid RMBs' MRs in SMCRv1 ADD LINK CONT

   - can: avoid possible use-after-free when j1939_can_rx_register fails

   - batman-adv: fix UaF while rescheduling delayed work

   - eth: qede: fix scheduling while atomic

   - eth: ice: make writes to /dev/gnssX synchronous"

* tag 'net-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
  bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacks
  bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE event
  bnxt_en: Skip firmware fatal error recovery if chip is not accessible
  bnxt_en: Query default VLAN before VNIC setup on a VF
  bnxt_en: Don't issue AP reset during ethtool's reset operation
  bnxt_en: Fix bnxt_hwrm_update_rss_hash_cfg()
  net: bcmgenet: Fix EEE implementation
  eth: ixgbe: fix the wake condition
  eth: bnxt: fix the wake condition
  lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release()
  bpf: Add extra path pointer check to d_path helper
  net: sched: fix possible refcount leak in tc_chain_tmplt_add()
  net: sched: act_police: fix sparse errors in tcf_police_dump()
  net: openvswitch: fix upcall counter access before allocation
  net: sched: move rtm_tca_policy declaration to include file
  ice: make writes to /dev/gnssX synchronous
  net: sched: add rcu annotations around qdisc->qdisc_sleeping
  rfs: annotate lockless accesses to RFS sock flow table
  rfs: annotate lockless accesses to sk->sk_rxhash
  virtio_net: use control_buf for coalesce params
  ...

Merge tag 'xfs-6.4-rc5-fixes' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Dave Chinner:
"These are a set of regression fixes discovered on recent kernels. I
  was hoping to send this to you a week and half ago, but events out of
  my control delayed finalising the changes until early this week.

  Whilst the diffstat looks large for this stage of the merge window, a
  large chunk of it comes from moving the guts of one function from one
  file to another i.e. it's the same code, it is just run in a different
  context where it is safe to hold a specific lock. Otherwise the
  individual changes are relatively small and straigtht forward.

  Summary:

   - Propagate unlinked inode list corruption back up to log recovery
     (regression fix)

   - improve corruption detection for AGFL entries, AGFL indexes and
     XEFI extents (syzkaller fuzzer oops report)

   - Avoid double perag reference release (regression fix)

   - Improve extent merging detection in scrub (regression fix)

   - Fix a new undefined high bit shift (regression fix)

   - Fix for AGF vs inode cluster buffer deadlock (regression fix)"

* tag 'xfs-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: collect errors from inodegc for unlinked inode recovery
  xfs: validate block number being freed before adding to xefi
  xfs: validity check agbnos on the AGFL
  xfs: fix agf/agfl verification on v4 filesystems
  xfs: fix double xfs_perag_rele() in xfs_filestream_pick_ag()
  xfs: fix broken logic when detecting mergeable bmap records
  xfs: Fix undefined behavior of shift into sign bit
  xfs: fix AGF vs inode cluster buffer deadlock
  xfs: defered work could create precommits
  xfs: restore allocation trylock iteration
  xfs: buffer pins need to hold a buffer reference

ice: Don't dereference NULL in ice_gnss_read error path

If pf is NULL in ice_gnss_read() then it will be dereferenced
in the error path by a call to dev_dbg(ice_pf_to_dev(pf), ...).

Avoid this by simply returning in this case.
If logging is desired an alternate approach might be to
use pr_err() before returning.

Flagged by Smatch as:

.../ice_gnss.c:196 ice_gnss_read() error: we previously assumed 'pf' could be null (see line 131)

Fixes: 43113ff73453 ("ice: add TTY for GNSS module for E810T device")
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Merge branch 'bnxt_en-bug-fixes'

Michael Chan says:

====================
bnxt_en: Bug fixes

This patchset has the following fixes for bnxt_en:

1. Add missing VNIC ID parameter in the FW message when getting an
updated RSS configuration from the FW.

2. Fix a warning when doing ethtool reset on newer chips.

3. Fix VLAN issue on a VF when a default VLAN is assigned.

4. Fix a problem during DPC (Downstream Port containment) scenario.

5. Fix a NULL pointer dereference when receiving a PTP event from FW.

6. Fix VXLAN/Geneve UDP port delete/add with newer FW.
====================

Link: https://lore.kernel.org/r/20230607075409.228450-1-michael.chan@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacks

As per the new udp tunnel framework, drivers which need to know the
details of a port entry (i.e. port type) when it gets deleted should
use the .set_port / .unset_port callbacks.

Implementing the current .udp_tunnel_sync callback would mean that the
deleted tunnel port entry would be all zeros. This used to work on
older firmware because it would not check the input when deleting a
tunnel port. With newer firmware, the delete will now fail and
subsequent tunnel port allocation will fail as a result.

Fixes: 442a35a5a7aa ("bnxt: convert to new udp_tunnel_nic infra")
Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE event

The firmware can send PHC_RTC_UPDATE async event on a PF that may not
have PTP registered. In such a case, there will be a null pointer
deference for bp->ptp_cfg when we try to handle the event.

Fix it by not registering for this event with the firmware if !bp->ptp_cfg.
Also, check that bp->ptp_cfg is valid before proceeding when we receive
the event.

Fixes: 8bcf6f04d4a5 ("bnxt_en: Handle async event when the PHC is updated in RTC mode")
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

bnxt_en: Skip firmware fatal error recovery if chip is not accessible

Driver starts firmware fatal error recovery by detecting
heartbeat failure or fw reset count register changing. But
these checks are not reliable if the device is not accessible.
This can happen while DPC (Downstream Port containment) is in
progress. Skip firmware fatal recovery if pci_device_is_present()
returns false.

Fixes: acfb50e4e773 ("bnxt_en: Add FW fatal devlink_health_reporter.")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

bnxt_en: Query default VLAN before VNIC setup on a VF

We need to call bnxt_hwrm_func_qcfg() on a VF to query the default
VLAN that may be setup by the PF.  If a default VLAN is enabled,
the VF cannot support VLAN acceleration on the receive side and
the VNIC must be setup to strip out the default VLAN tag.  If a
default VLAN is not enabled, the VF can support VLAN acceleration
on the receive side.  The VNIC should be set up to strip or not
strip the VLAN based on the RX VLAN acceleration setting.

Without this call to determine the default VLAN before calling
bnxt_setup_vnic(), the VNIC may not be set up correctly.  For
example, bnxt_setup_vnic() may set up to strip the VLAN tag based
on stale default VLAN information.  If RX VLAN acceleration is
not enabled, the VLAN tag will be incorrectly stripped and the
RX data path will not work correctly.

Fixes: cf6645f8ebc6 ("bnxt_en: Add function for VF driver to query default VLAN.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

bnxt_en: Don't issue AP reset during ethtool's reset operation

Only older NIC controller's firmware uses the PROC AP reset type.
Firmware on 5731X/5741X and newer chips does not support this reset
type. When bnxt_reset() issues a series of resets, this PROC AP
reset may actually fail on these newer chips because the firmware
is not ready to accept this unsupported command yet. Avoid this
unnecessary error by skipping this reset type on chips that don't
support it.

Fixes: 7a13240e3718 ("bnxt_en: fix ethtool_reset_flags ABI violations")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

bnxt_en: Fix bnxt_hwrm_update_rss_hash_cfg()

We must specify the vnic id of the vnic in the input structure of this
firmware message. Otherwise we will get an error from the firmware.

Fixes: 98a4322b70e8 ("bnxt_en: update RSS config using difference algorithm")
Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'batadv-net-pullrequest-20230607' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
Here is a batman-adv bugfix:

- fix a broken sync while rescheduling delayed work,
by Vladislav Efanov

* tag 'batadv-net-pullrequest-20230607' of git://git.open-mesh.org/linux-merge:
batman-adv: Broken sync while rescheduling delayed work
====================

Link: https://lore.kernel.org/r/20230607155515.548120-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: bcmgenet: Fix EEE implementation

We had a number of short comings:

- EEE must be re-evaluated whenever the state machine detects a link
  change as wight be switching from a link partner with EEE
  enabled/disabled

- tx_lpi_enabled controls whether EEE should be enabled/disabled for the
  transmit path, which applies to the TBUF block

- We do not need to forcibly enable EEE upon system resume, as the PHY
  state machine will trigger a link event that will do that, too

Fixes: 6ef398ea60d9 ("net: bcmgenet: add EEE support")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230606214348.2408018-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

eth: ixgbe: fix the wake condition

Flip the netif_carrier_ok() condition in queue wake logic.
When I moved it to inside __netif_txq_completed_wake()
I missed negating it.

This made the condition ineffective and could probably
lead to crashes.

Fixes: 301f227fc860 ("net: piggy back on the memory barrier in bql when waking queues")
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230607010826.960226-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

eth: bnxt: fix the wake condition

The down condition should be the negation of the wake condition,
IOW when I moved it from:

if (cond && wake())
to
if (__netif_txq_completed_wake(cond))

Cond should have been negated. Flip it now.

This bug leads to occasional crashes with netconsole.
It may also lead to queue never waking up in case BQL is not enabled.

Reported-by: David Wei <davidhwei@meta.com>
Fixes: 08a096780d92 ("bnxt: use new queue try_stop/try_wake macros")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230607010826.960226-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2023-06-07

We've added 7 non-merge commits during the last 7 day(s) which contain
a total of 12 files changed, 112 insertions(+), 7 deletions(-).

The main changes are:

1) Fix a use-after-free in BPF's task local storage, from KP Singh.

2) Make struct path handling more robust in bpf_d_path, from Jiri Olsa.

3) Fix a syzbot NULL-pointer dereference in sockmap, from Eric Dumazet.

4) UAPI fix for BPF_NETFILTER before final kernel ships,
   from Florian Westphal.

5) Fix map-in-map array_map_gen_lookup code generation where elem_size was
   not being set for inner maps, from Rhys Rustad-Elliott.

6) Fix sockopt_sk selftest's NETLINK_LIST_MEMBERSHIPS assertion,
   from Yonghong Song.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Add extra path pointer check to d_path helper
  selftests/bpf: Fix sockopt_sk selftest
  bpf: netfilter: Add BPF_NETFILTER bpf_attach_type
  selftests/bpf: Add access_inner_map selftest
  bpf: Fix elem_size not being set for inner maps
  bpf: Fix UAF in task local storage
  bpf, sockmap: Avoid potential NULL dereference in sk_psock_verdict_data_ready()
====================

Link: https://lore.kernel.org/r/20230607220514.29698-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release()

irq_cpu_rmap_release() calls cpu_rmap_put(), which may free the rmap.
So we need to clear the pointer to our glue structure in rmap before
doing that, not after.

Fixes: 4e0473f1060a ("lib: cpu_rmap: Avoid use after free on rmap->obj array entries")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZHo0vwquhOy3FaXc@decadent.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netfilter: nfnetlink: skip error delivery on batch in case of ENOMEM

If caller reports ENOMEM, then stop iterating over the batch and send a
single netlink message to userspace to report OOM.

Fixes: cbb8125eb40b ("netfilter: nfnetlink: deliver netlink errors on batch completion")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: integrate pipapo into commit protocol

The pipapo set backend follows copy-on-update approach, maintaining one
clone of the existing datastructure that is being updated. The clone
and current datastructures are swapped via rcu from the commit step.

The existing integration with the commit protocol is flawed because
there is no operation to clean up the clone if the transaction is
aborted. Moreover, the datastructure swap happens on set element
activation.

This patch adds two new operations for sets: commit and abort, these new
operations are invoked from the commit and abort steps, after the
transactions have been digested, and it updates the pipapo set backend
to use it.

This patch adds a new ->pending_update field to sets to maintain a list
of sets that require this new commit and abort operations.

Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge tag 'input-for-v6.4-rc5' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

- a fix for unbalanced open count for inhibited input devices

- fixups in Elantech PS/2 and Cyppress TTSP v5 drivers

- a quirk to soc_button_array driver to make it work with Lenovo
   Yoga Book X90F / X90L

- a removal of erroneous entry from xpad driver

* tag 'input-for-v6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: xpad - delete a Razer DeathAdder mouse VID/PID entry
  Input: psmouse - fix OOB access in Elantech protocol
  Input: soc_button_array - add invalid acpi_index DMI quirk handling
  Input: fix open count when closing inhibited device
  Input: cyttsp5 - fix array length

MAINTAINERS: Add entry for debug objects

This is overdue and an oversight.

Add myself to this file deespite the fact that I'm trying to reduce the
number of entries in this file which have my name attached, but in the
hope that patches wont get picked up elsewhere completely unreviewed and
unnoticed.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

afs: Fix setting of mtime when creating a file/dir/symlink

kafs incorrectly passes a zero mtime (ie. 1st Jan 1970) to the server when
creating a file, dir or symlink because the mtime recorded in the
afs_operation struct gets passed to the server by the marshalling routines,
but the afs_mkdir(), afs_create() and afs_symlink() functions don't set it.

This gets masked if a file or directory is subsequently modified.

Fix this by filling in op->mtime before calling the create op.

Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

bpf: Add extra path pointer check to d_path helper

Anastasios reported crash on stable 5.15 kernel with following
BPF attached to lsm hook:

  SEC("lsm.s/bprm_creds_for_exec")
  int BPF_PROG(bprm_creds_for_exec, struct linux_binprm *bprm)
  {
          struct path *path = &bprm->executable->f_path;
          char p[128] = { 0 };

          bpf_d_path(path, p, 128);
          return 0;
  }

But bprm->executable can be NULL, so bpf_d_path call will crash:

  BUG: kernel NULL pointer dereference, address: 0000000000000018
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI
  ...
  RIP: 0010:d_path+0x22/0x280
  ...
  Call Trace:
   <TASK>
   bpf_d_path+0x21/0x60
   bpf_prog_db9cf176e84498d9_bprm_creds_for_exec+0x94/0x99
   bpf_trampoline_6442506293_0+0x55/0x1000
   bpf_lsm_bprm_creds_for_exec+0x5/0x10
   security_bprm_creds_for_exec+0x29/0x40
   bprm_execve+0x1c1/0x900
   do_execveat_common.isra.0+0x1af/0x260
   __x64_sys_execve+0x32/0x40

It's problem for all stable trees with bpf_d_path helper, which was
added in 5.9.

This issue is fixed in current bpf code, where we identify and mark
trusted pointers, so the above code would fail even to load.

For the sake of the stable trees and to workaround potentially broken
verifier in the future, adding the code that reads the path object from
the passed pointer and verifies it's valid in kernel space.

Fixes: 6e22ab9da793 ("bpf: Add d_path helper")
Reported-by: Anastasios Papagiannis <tasos.papagiannnis@gmail.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230606181714.532998-1-jolsa@kernel.org

net: sched: fix possible refcount leak in tc_chain_tmplt_add()

try_module_get will be called in tcf_proto_lookup_ops. So module_put needs
to be called to drop the refcount if ops don't implement the required
function.

Fixes: 9f407f1768d3 ("net: sched: introduce chain templates")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: act_police: fix sparse errors in tcf_police_dump()

Fixes following sparse errors:

net/sched/act_police.c:360:28: warning: dereference of noderef expression
net/sched/act_police.c:362:45: warning: dereference of noderef expression
net/sched/act_police.c:362:45: warning: dereference of noderef expression
net/sched/act_police.c:368:28: warning: dereference of noderef expression
net/sched/act_police.c:370:45: warning: dereference of noderef expression
net/sched/act_police.c:370:45: warning: dereference of noderef expression
net/sched/act_police.c:376:45: warning: dereference of noderef expression
net/sched/act_police.c:376:45: warning: dereference of noderef expression

Fixes: d1967e495a8d ("net_sched: act_police: add 2 new attributes to support police 64bit rate and peakrate")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: openvswitch: fix upcall counter access before allocation

Currently, the per cpu upcall counters are allocated after the vport is
created and inserted into the system. This could lead to the datapath
accessing the counters before they are allocated resulting in a kernel
Oops.

Here is an example:

  PID: 59693    TASK: ffff0005f4f51500  CPU: 0    COMMAND: "ovs-vswitchd"
   #0 [ffff80000a39b5b0] __switch_to at ffffb70f0629f2f4
   #1 [ffff80000a39b5d0] __schedule at ffffb70f0629f5cc
   #2 [ffff80000a39b650] preempt_schedule_common at ffffb70f0629fa60
   #3 [ffff80000a39b670] dynamic_might_resched at ffffb70f0629fb58
   #4 [ffff80000a39b680] mutex_lock_killable at ffffb70f062a1388
   #5 [ffff80000a39b6a0] pcpu_alloc at ffffb70f0594460c
   #6 [ffff80000a39b750] __alloc_percpu_gfp at ffffb70f05944e68
   #7 [ffff80000a39b760] ovs_vport_cmd_new at ffffb70ee6961b90 [openvswitch]
   ...

  PID: 58682    TASK: ffff0005b2f0bf00  CPU: 0    COMMAND: "kworker/0:3"
   #0 [ffff80000a5d2f40] machine_kexec at ffffb70f056a0758
   #1 [ffff80000a5d2f70] __crash_kexec at ffffb70f057e2994
   #2 [ffff80000a5d3100] crash_kexec at ffffb70f057e2ad8
   #3 [ffff80000a5d3120] die at ffffb70f0628234c
   #4 [ffff80000a5d31e0] die_kernel_fault at ffffb70f062828a8
   #5 [ffff80000a5d3210] __do_kernel_fault at ffffb70f056a31f4
   #6 [ffff80000a5d3240] do_bad_area at ffffb70f056a32a4
   #7 [ffff80000a5d3260] do_translation_fault at ffffb70f062a9710
   #8 [ffff80000a5d3270] do_mem_abort at ffffb70f056a2f74
   #9 [ffff80000a5d32a0] el1_abort at ffffb70f06297dac
  #10 [ffff80000a5d32d0] el1h_64_sync_handler at ffffb70f06299b24
  #11 [ffff80000a5d3410] el1h_64_sync at ffffb70f056812dc
  #12 [ffff80000a5d3430] ovs_dp_upcall at ffffb70ee6963c84 [openvswitch]
  #13 [ffff80000a5d3470] ovs_dp_process_packet at ffffb70ee6963fdc [openvswitch]
  #14 [ffff80000a5d34f0] ovs_vport_receive at ffffb70ee6972c78 [openvswitch]
  #15 [ffff80000a5d36f0] netdev_port_receive at ffffb70ee6973948 [openvswitch]
  #16 [ffff80000a5d3720] netdev_frame_hook at ffffb70ee6973a28 [openvswitch]
  #17 [ffff80000a5d3730] __netif_receive_skb_core.constprop.0 at ffffb70f06079f90

We moved the per cpu upcall counter allocation to the existing vport
alloc and free functions to solve this.

Fixes: 95637d91fefd ("net: openvswitch: release vport resources on failure")
Fixes: 1933ea365aa7 ("net: openvswitch: Add support to count upcall packets")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: move rtm_tca_policy declaration to include file

rtm_tca_policy is used from net/sched/sch_api.c and net/sched/cls_api.c,
thus should be declared in an include file.

This fixes the following sparse warning:
net/sched/sch_api.c:1434:25: warning: symbol 'rtm_tca_policy' was not declared. Should it be static?

Fixes: e331473fee3d ("net/sched: cls_api: add missing validation of netlink attributes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ice: make writes to /dev/gnssX synchronous

The current ice driver's GNSS write implementation buffers writes and
works through them asynchronously in a kthread. That's bad because:
- The GNSS write_raw operation is supposed to be synchronous[1][2].
- There is no upper bound on the number of pending writes.
   Userspace can submit writes much faster than the driver can process,
   consuming unlimited amounts of kernel memory.

A patch that's currently on review[3] ("[v3,net] ice: Write all GNSS
buffers instead of first one") would add one more problem:
- The possibility of waiting for a very long time to flush the write
   work when doing rmmod, softlockups.

To fix these issues, simplify the implementation: Drop the buffering,
the write_work, and make the writes synchronous.

I tested this with gpsd and ubxtool.

[1] https://events19.linuxfoundation.org/wp-content/uploads/2017/12/The-GNSS-Subsystem-Johan-Hovold-Hovold-Consulting-AB.pdf
    "User interface" slide.
[2] A comment in drivers/gnss/core.c:gnss_write():
        /* Ignoring O_NONBLOCK, write_raw() is synchronous. */
[3] https://patchwork.ozlabs.org/project/intel-wired-lan/patch/20230217120541.16745-1-karol.kolacinski@intel.com/

Fixes: d6b98c8d242a ("ice: add write functionality for GNSS TTY")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: add rcu annotations around qdisc->qdisc_sleeping

syzbot reported a race around qdisc->qdisc_sleeping [1]

It is time we add proper annotations to reads and writes to/from
qdisc->qdisc_sleeping.

[1]
BUG: KCSAN: data-race in dev_graft_qdisc / qdisc_lookup_rcu

read to 0xffff8881286fc618 of 8 bytes by task 6928 on cpu 1:
qdisc_lookup_rcu+0x192/0x2c0 net/sched/sch_api.c:331
__tcf_qdisc_find+0x74/0x3c0 net/sched/cls_api.c:1174
tc_get_tfilter+0x18f/0x990 net/sched/cls_api.c:2547
rtnetlink_rcv_msg+0x7af/0x8c0 net/core/rtnetlink.c:6386
netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2546
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6413
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1913
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0x375/0x4c0 net/socket.c:2503
___sys_sendmsg net/socket.c:2557 [inline]
__sys_sendmsg+0x1e3/0x270 net/socket.c:2586
__do_sys_sendmsg net/socket.c:2595 [inline]
__se_sys_sendmsg net/socket.c:2593 [inline]
__x64_sys_sendmsg+0x46/0x50 net/socket.c:2593
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

write to 0xffff8881286fc618 of 8 bytes by task 6912 on cpu 0:
dev_graft_qdisc+0x4f/0x80 net/sched/sch_generic.c:1115
qdisc_graft+0x7d0/0xb60 net/sched/sch_api.c:1103
tc_modify_qdisc+0x712/0xf10 net/sched/sch_api.c:1693
rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6395
netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2546
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6413
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1913
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0x375/0x4c0 net/socket.c:2503
___sys_sendmsg net/socket.c:2557 [inline]
__sys_sendmsg+0x1e3/0x270 net/socket.c:2586
__do_sys_sendmsg net/socket.c:2595 [inline]
__se_sys_sendmsg net/socket.c:2593 [inline]
__x64_sys_sendmsg+0x46/0x50 net/socket.c:2593
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 6912 Comm: syz-executor.5 Not tainted 6.4.0-rc3-syzkaller-00190-g0d85b27b0cc6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/16/2023

Fixes: 3a7d0d07a386 ("net: sched: extend Qdisc with rcu")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Jamal Hadi Salim<jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'rfs-lockless-annotate'

Eric Dumazet says:

====================
rfs: annotate lockless accesses

rfs runs without locks held, so we should annotate
read and writes to shared variables.

It should prevent compilers forcing writes
in the following situation:

  if (var != val)
     var = val;

A compiler could indeed simply avoid the conditional:

    var = val;

This matters if var is shared between many cpus.

v2: aligns one closing bracket (Simon)
    adds Fixes: tags (Jakub)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

rfs: annotate lockless accesses to RFS sock flow table

Add READ_ONCE()/WRITE_ONCE() on accesses to the sock flow table.

This also prevents a (smart ?) compiler to remove the condition in:

if (table->ents[index] != newval)
table->ents[index] = newval;

We need the condition to avoid dirtying a shared cache line.

Fixes: fec5e652e58f ("rfs: Receive Flow Steering")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>