Mike Frysinger [Mon, 21 Mar 2011 06:39:10 +0000 (02:39 -0400)]
Blackfin: enable atomic64_t support
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 22 Mar 2011 17:41:22 +0000 (13:41 -0400)]
Blackfin: wire up new syncfs syscall
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Graf Yang [Fri, 19 Mar 2010 08:01:27 +0000 (08:01 +0000)]
Blackfin: SMP: flush CoreB cache when shutting down
When CoreB wakes up, it needs to read variables that CoreA might have
modified, and might be in CoreB's cache. So kill CoreB's cache before
going to sleep so that when we wake up, we are in a coherent state.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Linus Torvalds [Tue, 22 Mar 2011 17:42:43 +0000 (10:42 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: make fuse_dentry_revalidate() RCU aware
fuse: make fuse_permission() RCU aware
fuse: wakeup pollers on connection release/abort
fuse: reduce size of struct fuse_request
Linus Torvalds [Tue, 22 Mar 2011 17:41:36 +0000 (10:41 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
xen: update mask_rw_pte after kernel page tables init changes
xen: set max_pfn_mapped to the last pfn mapped
x86: Cleanup highmap after brk is concluded
Fix up trivial onflict (added header file includes) in
arch/x86/mm/init_64.c
Linus Torvalds [Tue, 22 Mar 2011 17:06:54 +0000 (10:06 -0700)]
Merge branch 'next-samsung' of git://git.fluff.org/bjdooks/linux
* 'next-samsung' of git://git.fluff.org/bjdooks/linux:
ARM: H1940/RX1950: Change default LED triggers
ARM: S3C2442: RX1950: Add support for LED blinking
ARM: S3C2442: RX1950: Retain LEDs state in suspend
ARM: S3C2410: H1940: Fix lcd_power_set function
ARM: S3C2410: H1940: Add battery support
ARM: S3C2410: H1940: Use leds-gpio driver for LEDs managing
ARM: S3C2410: H1940: Make h1940-bluetooth.c compile again
ARM: S3C2410: H1940: Add keys device
Linus Torvalds [Tue, 22 Mar 2011 17:05:27 +0000 (10:05 -0700)]
Merge branch 'for-linus/2639/i2c-2' of git://git.fluff.org/bjdooks/linux
* 'for-linus/2639/i2c-2' of git://git.fluff.org/bjdooks/linux:
i2c-pxa2xx: Don't clear isr bits too early
i2c-pxa2xx: Fix register offsets
i2c-pxa2xx: pass of_node from platform driver to adapter and publish
i2c-pxa2xx: check timeout correctly
i2c-pxa2xx: add support for shared IRQ handler
i2c-pxa2xx: Add PCI support for PXA I2C controller
ARM: pxa2xx: reorganize I2C files
i2c-pxa2xx: use dynamic register layout
i2c-mxs: set controller to pio queue mode after reset
i2c-eg20t: support new device OKI SEMICONDUCTOR ML7213 IOH
i2c/busses: Add support for Diolan U2C-12 USB-I2C adapter
Linus Torvalds [Tue, 22 Mar 2011 16:36:23 +0000 (09:36 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/penberg/slab-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
slub: Dont define useless label in the !CONFIG_CMPXCHG_LOCAL case
slab,rcu: don't assume the size of struct rcu_head
slub,rcu: don't assume the size of struct rcu_head
slub: automatically reserve bytes at the end of slab
Lockless (and preemptless) fastpaths for slub
slub: Get rid of slab_free_hook_irq()
slub: min_partial needs to be in first cacheline
slub: fix ksize() build error
slub: fix kmemcheck calls to match ksize() hints
Revert "slab: Fix missing DEBUG_SLAB last user"
mm: Remove support for kmem_cache_name()
Martin K. Petersen [Tue, 22 Mar 2011 04:27:42 +0000 (00:27 -0400)]
sd: Fail discard requests when logical block provisioning has been disabled
Ensure that we kill discard requests after logical block provisioning
has been disabled in sysfs.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 22 Mar 2011 16:25:34 +0000 (09:25 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits)
IPVS: Use global mutex in ip_vs_app.c
ipvs: fix a typo in __ip_vs_control_init()
veth: Fix the byte counters
net ipv6: Fix duplicate /proc/sys/net/ipv6/neigh directory entries.
macvlan: Fix use after free of struct macvlan_port.
net: fix incorrect spelling in drop monitor protocol
can: c_can: Do basic c_can configuration _before_ enabling the interrupts
net/appletalk: fix atalk_release use after free
ipx: fix ipx_release()
snmp: SNMP_UPD_PO_STATS_BH() always called from softirq
l2tp: fix possible oops on l2tp_eth module unload
xfrm: Fix initialize repl field of struct xfrm_state
netfilter: ipt_CLUSTERIP: fix buffer overflow
netfilter: xtables: fix reentrancy
netfilter: ipset: fix checking the type revision at create command
netfilter: ipset: fix address ranges at hash:*port* types
niu: Rename NIU parent platform device name to fix conflict.
r8169: fix a bug in rtl8169_init_phy()
bonding: fix a typo in a comment
ftmac100: use resource_size()
...
Simon Horman [Mon, 21 Mar 2011 15:18:01 +0000 (15:18 +0000)]
IPVS: Use global mutex in ip_vs_app.c
As part of the work to make IPVS network namespace aware
__ip_vs_app_mutex was replaced by a per-namespace lock,
ipvs->app_mutex. ipvs->app_key is also supplied for debugging purposes.
Unfortunately this implementation results in ipvs->app_key residing
in non-static storage which at the very least causes a lockdep warning.
This patch takes the rather heavy-handed approach of reinstating
__ip_vs_app_mutex which will cover access to the ipvs->list_head
of all network namespaces.
[ 12.610000] IPVS: Creating netns size=2456 id=0
[ 12.630000] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[ 12.640000] BUG: key
ffff880003bbf1a0 not in .data!
[ 12.640000] ------------[ cut here ]------------
[ 12.640000] WARNING: at kernel/lockdep.c:2701 lockdep_init_map+0x37b/0x570()
[ 12.640000] Hardware name: Bochs
[ 12.640000] Pid: 1, comm: swapper Tainted: G W 2.6.38-kexec-06330-g69b7efe-dirty #122
[ 12.650000] Call Trace:
[ 12.650000] [<
ffffffff8102e685>] warn_slowpath_common+0x75/0xb0
[ 12.650000] [<
ffffffff8102e6d5>] warn_slowpath_null+0x15/0x20
[ 12.650000] [<
ffffffff8105967b>] lockdep_init_map+0x37b/0x570
[ 12.650000] [<
ffffffff8105829d>] ? trace_hardirqs_on+0xd/0x10
[ 12.650000] [<
ffffffff81055ad8>] debug_mutex_init+0x38/0x50
[ 12.650000] [<
ffffffff8104bc4c>] __mutex_init+0x5c/0x70
[ 12.650000] [<
ffffffff81685ee7>] __ip_vs_app_init+0x64/0x86
[ 12.660000] [<
ffffffff81685a3b>] ? ip_vs_init+0x0/0xff
[ 12.660000] [<
ffffffff811b1c33>] T.620+0x43/0x170
[ 12.660000] [<
ffffffff811b1e9a>] ? register_pernet_subsys+0x1a/0x40
[ 12.660000] [<
ffffffff81685a3b>] ? ip_vs_init+0x0/0xff
[ 12.660000] [<
ffffffff81685a3b>] ? ip_vs_init+0x0/0xff
[ 12.660000] [<
ffffffff811b1db7>] register_pernet_operations+0x57/0xb0
[ 12.660000] [<
ffffffff81685a3b>] ? ip_vs_init+0x0/0xff
[ 12.670000] [<
ffffffff811b1ea9>] register_pernet_subsys+0x29/0x40
[ 12.670000] [<
ffffffff81685f19>] ip_vs_app_init+0x10/0x12
[ 12.670000] [<
ffffffff81685a87>] ip_vs_init+0x4c/0xff
[ 12.670000] [<
ffffffff8166562c>] do_one_initcall+0x7a/0x12e
[ 12.670000] [<
ffffffff8166583e>] kernel_init+0x13e/0x1c2
[ 12.670000] [<
ffffffff8128c134>] kernel_thread_helper+0x4/0x10
[ 12.670000] [<
ffffffff8128ad40>] ? restore_args+0x0/0x30
[ 12.680000] [<
ffffffff81665700>] ? kernel_init+0x0/0x1c2
[ 12.680000] [<
ffffffff8128c130>] ? kernel_thread_helper+0x0/0x1global0
Signed-off-by: Simon Horman <horms@verge.net.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Julian Anastasov <ja@ssi.bg>
Cc: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 21 Mar 2011 10:15:40 +0000 (10:15 +0000)]
ipvs: fix a typo in __ip_vs_control_init()
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric W. Biederman [Tue, 22 Mar 2011 01:24:53 +0000 (18:24 -0700)]
veth: Fix the byte counters
Commit
44540960 "veth: move loopback logic to common location" introduced
a bug in the packet counters. I don't understand why that happened as it
is not explained in the comments and the mut check in dev_forward_skb
retains the assumption that skb->len is the total length of the packet.
I just measured this emperically by setting up a veth pair between two
noop network namespaces setting and attempting a telnet connection between
the two. I saw three packets in each direction and the byte counters were
exactly 14*3 = 42 bytes high in each direction. I got the actual
packet lengths with tcpdump.
So remove the extra ETH_HLEN from the veth byte count totals.
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric W. Biederman [Tue, 22 Mar 2011 01:23:34 +0000 (18:23 -0700)]
net ipv6: Fix duplicate /proc/sys/net/ipv6/neigh directory entries.
When I was fixing issues with unregisgtering tables under /proc/sys/net/ipv6/neigh
by adding a mount point it appears I missed a critical ordering issue, in the
ipv6 initialization. I had not realized that ipv6_sysctl_register is called
at the very end of the ipv6 initialization and in particular after we call
neigh_sysctl_register from ndisc_init.
"neigh" needs to be initialized in ipv6_static_sysctl_register which is
the first ipv6 table to initialized, and definitely before ndisc_init.
This removes the weirdness of duplicate tables while still providing a
"neigh" mount point which prevents races in sysctl unregistering.
This was initially reported at https://bugzilla.kernel.org/show_bug.cgi?id=31232
Reported-by: sunkan@zappa.cx
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric W. Biederman [Tue, 22 Mar 2011 01:22:22 +0000 (18:22 -0700)]
macvlan: Fix use after free of struct macvlan_port.
When the macvlan driver was extended to call unregisgter_netdevice_queue
in
23289a37e2b127dfc4de1313fba15bb4c9f0cd5b, a use after free of struct
macvlan_port was introduced. The code in dellink relied on unregister_netdevice
actually unregistering the net device so it would be safe to free macvlan_port.
Since unregister_netdevice_queue can just queue up the unregister instead of
performing the unregiser immediately we free the macvlan_port too soon and
then the code in macvlan_stop removes the macaddress for the set of macaddress
to listen for and uses memory that has already been freed.
To fix this add a reference count to track when it is safe to free the macvlan_port
and move the call of macvlan_port_destroy into macvlan_uninit which is guaranteed
to be called after the final macvlan_port_close.
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Tue, 22 Mar 2011 01:20:26 +0000 (18:20 -0700)]
net: fix incorrect spelling in drop monitor protocol
It was pointed out to me recently that my spelling could be better :)
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jan Altenberg [Tue, 22 Mar 2011 01:19:26 +0000 (18:19 -0700)]
can: c_can: Do basic c_can configuration _before_ enabling the interrupts
I ran into some trouble while testing the SocketCAN driver for the BOSCH
C_CAN controller. The interface is not correctly initialized, if I put
some CAN traffic on the line, _while_ the interface is being started
(which means: the interface doesn't come up correcty, if there's some RX
traffic while doing 'ifconfig can0 up').
The current implementation enables the controller interrupts _before_
doing the basic c_can configuration. I think, this should be done the
other way round.
The patch below fixes things for me.
Signed-off-by: Jan Altenberg <jan@linutronix.de>
Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Tue, 22 Mar 2011 01:18:00 +0000 (18:18 -0700)]
net/appletalk: fix atalk_release use after free
The BKL removal in appletalk introduced a use-after-free problem,
where atalk_destroy_socket frees a sock, but we still release
the socket lock on it.
An easy fix is to take an extra reference on the sock and sock_put
it when returning from atalk_release.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 22 Mar 2011 01:16:39 +0000 (18:16 -0700)]
ipx: fix ipx_release()
Commit
b0d0d915d1d1a0 (remove the BKL) added a regression, because
sock_put() can free memory while we are going to use it later.
Fix is to delay sock_put() _after_ release_sock().
Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 22 Mar 2011 01:12:54 +0000 (18:12 -0700)]
snmp: SNMP_UPD_PO_STATS_BH() always called from softirq
We dont need to test if we run from softirq context, we definitely are.
This saves few instructions in ip_rcv() & ip_rcv_finish()
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
James Chapman [Tue, 22 Mar 2011 01:10:25 +0000 (18:10 -0700)]
l2tp: fix possible oops on l2tp_eth module unload
A struct used in the l2tp_eth driver for registering network namespace
ops was incorrectly marked as __net_initdata, leading to oops when
module unloaded.
BUG: unable to handle kernel paging request at
ffffffffa00ec098
IP: [<
ffffffff8123dbd8>] ops_exit_list+0x7/0x4b
PGD 142d067 PUD 1431063 PMD
195da8067 PTE 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/module/l2tp_eth/refcnt
Call Trace:
[<
ffffffff8123dc94>] ? unregister_pernet_operations+0x32/0x93
[<
ffffffff8123dd20>] ? unregister_pernet_device+0x2b/0x38
[<
ffffffff81068b6e>] ? sys_delete_module+0x1b8/0x222
[<
ffffffff810c7300>] ? do_munmap+0x254/0x318
[<
ffffffff812c64e5>] ? page_fault+0x25/0x30
[<
ffffffff812c6952>] ? system_call_fastpath+0x16/0x1b
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Tue, 22 Mar 2011 01:08:28 +0000 (18:08 -0700)]
xfrm: Fix initialize repl field of struct xfrm_state
Commit 'xfrm: Move IPsec replay detection functions to a separate file'
(
9fdc4883d92d20842c5acea77a4a21bb1574b495)
introduce repl field to struct xfrm_state, and only initialize it
under SA's netlink create path, the other path, such as pf_key,
ipcomp/ipcomp6 etc, the repl field remaining uninitialize. So if
the SA is created by pf_key, any input packet with SA's encryption
algorithm will cause panic.
int xfrm_input()
{
...
x->repl->advance(x, seq);
...
}
This patch fixed it by introduce new function __xfrm_init_state().
Pid: 0, comm: swapper Not tainted 2.6.38-next+ #14 Bochs Bochs
EIP: 0060:[<
c078e5d5>] EFLAGS:
00010206 CPU: 0
EIP is at xfrm_input+0x31c/0x4cc
EAX:
dd839c00 EBX:
00000084 ECX:
00000000 EDX:
01000000
ESI:
dd839c00 EDI:
de3a0780 EBP:
dec1de88 ESP:
dec1de64
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process swapper (pid: 0, ti=
dec1c000 task=
c09c0f20 task.ti=
c0992000)
Stack:
00000000 00000000 00000002 c0ba27c0 00100000 01000000 de3a0798 c0ba27c0
00000033 dec1de98 c0786848 00000000 de3a0780 dec1dea4 c0786868 00000000
dec1debc c074ee56 e1da6b8c de3a0780 c074ed44 de3a07a8 dec1decc c074ef32
Call Trace:
[<
c0786848>] xfrm4_rcv_encap+0x22/0x27
[<
c0786868>] xfrm4_rcv+0x1b/0x1d
[<
c074ee56>] ip_local_deliver_finish+0x112/0x1b1
[<
c074ed44>] ? ip_local_deliver_finish+0x0/0x1b1
[<
c074ef32>] NF_HOOK.clone.1+0x3d/0x44
[<
c074ef77>] ip_local_deliver+0x3e/0x44
[<
c074ed44>] ? ip_local_deliver_finish+0x0/0x1b1
[<
c074ec03>] ip_rcv_finish+0x30a/0x332
[<
c074e8f9>] ? ip_rcv_finish+0x0/0x332
[<
c074ef32>] NF_HOOK.clone.1+0x3d/0x44
[<
c074f188>] ip_rcv+0x20b/0x247
[<
c074e8f9>] ? ip_rcv_finish+0x0/0x332
[<
c072797d>] __netif_receive_skb+0x373/0x399
[<
c0727bc1>] netif_receive_skb+0x4b/0x51
[<
e0817e2a>] cp_rx_poll+0x210/0x2c4 [8139cp]
[<
c072818f>] net_rx_action+0x9a/0x17d
[<
c0445b5c>] __do_softirq+0xa1/0x149
[<
c0445abb>] ? __do_softirq+0x0/0x149
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vasily Khoruzhick [Thu, 17 Mar 2011 18:04:57 +0000 (20:04 +0200)]
ARM: H1940/RX1950: Change default LED triggers
Change LED triggers to mimic WinMobile behavior:
red blinking when battery is charging,
orange solid when battery is charged.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Vasily Khoruzhick [Sun, 13 Mar 2011 13:53:29 +0000 (15:53 +0200)]
i2c-pxa2xx: Don't clear isr bits too early
isr is passed later into i2c_pxa_irq_txempty and
i2c_pxa_irq_rxfull and they may use some other bits
than irq sources.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 21 Mar 2011 22:57:25 +0000 (22:57 +0000)]
Merge branches 'for-2639/i2c/i2c-ce4100-v6', 'for-2639/i2c/i2c-eg20t-v3' and 'for-2639/i2c/i2c-imx' into for-linus/2639/i2c-2
Linus Torvalds [Mon, 21 Mar 2011 22:55:26 +0000 (15:55 -0700)]
Merge branch 'kbuild' of git://git./linux/kernel/git/mmarek/kbuild-2.6
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
kbuild: Make DEBUG_SECTION_MISMATCH selectable, but not on by default
genksyms: Regenerate lexer and parser
genksyms: Track changes to enum constants
genksyms: simplify usage of find_symbol()
genksyms: Add helpers for building string lists
genksyms: Simplify printing of symbol types
genksyms: Simplify lexer
genksyms: Do not paste the bison header file to lex.c
modpost: fix trailing comma
KBuild: silence "'scripts/unifdef' is up to date."
kbuild: Add extra gcc checks
kbuild: reenable section mismatch analysis
unifdef: update to upstream version 2.5
Jesper Juhl [Mon, 21 Mar 2011 19:47:31 +0000 (20:47 +0100)]
Reduce sequential pointer derefs in scsi_error.c and reduce size as well
This patch reduces the number of sequential pointer derefs in
drivers/scsi/scsi_error.c
This has been submitted a number of times over a couple of years. I
believe this version adresses all comments it has gathered over time.
Please apply or reject with a reason.
The benefits are:
- makes the code easier to read. Lots of sequential derefs of the same
pointers is not easy on the eye.
- theoretically at least, just dereferencing the pointers once can
allow the compiler to generally slightly faster code, so in theory
this could also be a micro speed optimization.
- reduces size of object file (tiny effect: on x86-64, in at least one
configuration, the text size decreased from 9439 bytes to 9400)
- removes some pointless (mostly trailing) whitespace.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gary Hade [Mon, 21 Mar 2011 17:28:59 +0000 (10:28 -0700)]
matroxfb: remove incorrect Matrox G200eV support
Remove incorrect Matrox G200eV support that was previously added by
commit
e3a1938805d2e81b27d3d348788644f3bad004f2
A serious issue with the incorrect G200eV support that reproduces on the
Matrox G200eV equipped IBM x3650 M2 is the total lack of text (login
banner, login prompt, etc) on the console when X is not running and
total lack of text on all of the virtual consoles after X is started.
Any concerns that the incorrect code (upstream since October 2008) has
been successfully used on non-IBM G200eV equipped system(s) appear to be
unwarranted. In addition to the serious/non-intermittent nature of
issues that have been spotted on IBM systems, complete removal of the
incorrect code is clearly supported by the following Matrox (Yannick
Heneault) provided input:
"It impossible that this patch should have work on a system.
The patch only declare the G200eV as a regular G200 which is
not case. Many registers are different, including at least the
PLL programming sequence. If the G200eV is programmed like a
regular G200, it will not display anything."
v1 - Initial patch that removed the incorrect code for _all_
G200eV equipped systems.
v2 - Darrick Wong provided patch that blacklisted the incorrect
code on G200eV equipped IBM systems leaving it enabled on
all G200eV equipped non-IBM systems.
v3 - Same code changes included with v1 plus additional
justification for complete removal of the incorrect code.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Petr Vandrovec <vandrove@vc.cvut.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yannick Heneault <yannick_heneault@matrox.com>
Cc: Christian Toutant <ctoutant@matrox.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 21 Mar 2011 21:24:56 +0000 (14:24 -0700)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (23 commits)
xfs: don't name variables "panic"
xfs: factor agf counter updates into a helper
xfs: clean up the xfs_alloc_compute_aligned calling convention
xfs: kill support/debug.[ch]
xfs: Convert remaining cmn_err() callers to new API
xfs: convert the quota debug prints to new API
xfs: rename xfs_cmn_err_fsblock_zero()
xfs: convert xfs_fs_cmn_err to new error logging API
xfs: kill xfs_fs_mount_cmn_err() macro
xfs: kill xfs_fs_repair_cmn_err() macro
xfs: convert xfs_cmn_err to xfs_alert_tag
xfs: Convert xlog_warn to new logging interface
xfs: Convert linux-2.6/ files to new logging interface
xfs: introduce new logging API.
xfs: zero proper structure size for geometry calls
xfs: enable delaylog by default
xfs: more sensible inode refcounting for ialloc
xfs: stop using xfs_trans_iget in the RT allocator
xfs: check if device support discard in xfs_ioc_trim()
xfs: prevent leaking uninitialized stack memory in FSGEOMETRY_V1
...
Julien Tinnes [Fri, 18 Mar 2011 22:05:21 +0000 (15:05 -0700)]
Prevent rt_sigqueueinfo and rt_tgsigqueueinfo from spoofing the signal code
Userland should be able to trust the pid and uid of the sender of a
signal if the si_code is SI_TKILL.
Unfortunately, the kernel has historically allowed sigqueueinfo() to
send any si_code at all (as long as it was negative - to distinguish it
from kernel-generated signals like SIGILL etc), so it could spoof a
SI_TKILL with incorrect siginfo values.
Happily, it looks like glibc has always set si_code to the appropriate
SI_QUEUE, so there are probably no actual user code that ever uses
anything but the appropriate SI_QUEUE flag.
So just tighten the check for si_code (we used to allow any negative
value), and add a (one-time) warning in case there are binaries out
there that might depend on using other si_code values.
Signed-off-by: Julien Tinnes <jln@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 21 Mar 2011 21:13:48 +0000 (14:13 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/rostedt/linux-2.6-ktest
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest:
ktest: Add STOP_TEST_AFTER to stop the test after a period of time
ktest: Monitor kernel while running of user tests
ktest: Fix bug where the test would not end after failure
ktest: Add BISECT_FILES to run git bisect on paths
ktest: Add BISECT_SKIP
ktest: Add manual bisect
ktest: Handle kernels before make oldnoconfig
ktest: Start failure timeout on panic too
ktest: Print logfile name on failure
Linus Torvalds [Mon, 21 Mar 2011 21:02:55 +0000 (14:02 -0700)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
hwmon: (ads1015) Make gain and datarate configurable
hwmon: (ads1015) Drop dynamic attribute group
hwmon: Add support for Texas Instruments ADS1015
hwmon: New driver for SMSC SCH5627
hwmon: (abituguru*) Update my email address
hwmon: (lm75) Speed up detection
hwmon: (lm75) Add detection of the National Semiconductor LM75A
hp_accel: Fix driver name
Move lis3lv02d drivers to drivers/misc
Move hp_accel to drivers/platform/x86
Let Kconfig handle lis3lv02d dependencies
hwmon: (sht15) Fix integer overflow in humidity calculation
hwmon: (sht15) Spelling fix
hwmon: (w83795) Document pin mapping
Luck, Tony [Fri, 18 Mar 2011 22:33:43 +0000 (15:33 -0700)]
pstore: use mount option instead sysfs to tweak kmsg_bytes
/sys/fs is a somewhat strange way to tweak what could more
obviously be tuned with a mount option.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 21 Mar 2011 17:06:51 +0000 (10:06 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
FS: lookup_mnt() is only used in the core fs routines now
bfs: fix bitmap size argument to find_first_zero_bit()
fs: Use BUG_ON(!mnt) at dentry_open().
fs: devpts_pty_new() return -ENOMEM if dentry allocation failed
nfs: lock() vs unlock() typo
pstore: fix leaking ->i_private
introduce sys_syncfs to sync a single file system
Small typo fix...
Filesystem: fifo: Fixed coding style issue.
fs/inode: Fix kernel-doc format for inode_init_owner
select: remove unused MAX_SELECT_SECONDS
vfs: cleanup do_vfs_ioctl()
Linus Torvalds [Mon, 21 Mar 2011 17:05:22 +0000 (10:05 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: core: ignore link-active bit of new nodes, fix device recognition
firewire: sbp2: revert obsolete 'fix stall with "Unsolicited response"'
firewire: core: increase default SPLIT_TIMEOUT value
firewire: ohci: Misleading kfree in ohci.c::pci_probe/remove
firewire: ohci: omit IntEvent.busReset check rom AT queueing
firewire: ohci: prevent starting of iso contexts with empty queue
firewire: ohci: prevent iso completion callbacks after context stop
firewire: core: rename some variables
firewire: nosy: should work on Power Mac G4 PCI too
firewire: core: fix card->reset_jiffies overflow
firewire: cdev: remove unneeded reference
firewire: cdev: always wait for outbound transactions to complete
firewire: cdev: remove unneeded idr_find() from complete_transaction()
firewire: ohci: log dead DMA contexts
Linus Torvalds [Mon, 21 Mar 2011 17:04:53 +0000 (10:04 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jejb/parisc-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
[PARISC] Convert to new irq_chip functions
[PARISC] fix per-cpu flag problem in the cpu affinity checkers
[PARISC] fix vmap flush/invalidate
eliminate special FLUSH flag from page table
parisc: flush pages through tmpalias space
Dirk Eibach [Mon, 21 Mar 2011 16:59:37 +0000 (17:59 +0100)]
hwmon: (ads1015) Make gain and datarate configurable
Configuration for ads1015 gain and datarate is possible via
devicetree or platform data.
This is a followup patch to previous ads1015 patches on Jean Delvares
tree.
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Mon, 21 Mar 2011 16:59:37 +0000 (17:59 +0100)]
hwmon: (ads1015) Drop dynamic attribute group
It is cheaper to handle attributes individually.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Dirk Eibach <eibach@gdsys.de>
Dirk Eibach [Mon, 21 Mar 2011 16:59:36 +0000 (17:59 +0100)]
hwmon: Add support for Texas Instruments ADS1015
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Hans de Goede [Mon, 21 Mar 2011 16:59:36 +0000 (17:59 +0100)]
hwmon: New driver for SMSC SCH5627
SMSC SCH5627 Super I/O chips include complete hardware monitoring
capabilities. They can monitor up to 5 voltages, 4 fans and 8
temperatures.
The hardware monitoring part of the SMSC SCH5627 is accessed by talking
through an embedded microcontroller. An application note describing the
protocol for communicating with the microcontroller is available upon
request. Please mail me if you want a copy.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Hans de Goede [Mon, 21 Mar 2011 16:59:36 +0000 (17:59 +0100)]
hwmon: (abituguru*) Update my email address
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Mon, 21 Mar 2011 16:59:36 +0000 (17:59 +0100)]
hwmon: (lm75) Speed up detection
Make the LM75/LM75A device detection faster:
* Don't read the current temperature value when we don't use it.
* Check for unused bits in the configuration register as soon as we
have read its value.
* Don't use word reads, not all devices support this, and some which
don't misbehave when you try.
* Check for cycling register values every 40 register addresses
instead of every 8, it's 5 times faster and just as efficient.
Some of these improvements come straight from the user-space
sensors-detect script, so both detection routines are in line now.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Len Sorensen [Mon, 21 Mar 2011 16:59:36 +0000 (17:59 +0100)]
hwmon: (lm75) Add detection of the National Semiconductor LM75A
Add support for detection of the National Semiconductor LM75A using the ID
register value.
Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Mon, 21 Mar 2011 16:59:36 +0000 (17:59 +0100)]
hp_accel: Fix driver name
I suspect that the "lis3lv02d" driver name is a legacy from before
the split into several modules. Use a specific name for the hp_accel
driver, for better error messages and easier investigation of issues.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
Jean Delvare [Mon, 21 Mar 2011 16:59:36 +0000 (17:59 +0100)]
Move lis3lv02d drivers to drivers/misc
The lis3lv02d drivers aren't hardware monitoring drivers, so the don't
belong to drivers/hwmon. Move them to drivers/misc, short of a better
home.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
Jean Delvare [Mon, 21 Mar 2011 16:59:36 +0000 (17:59 +0100)]
Move hp_accel to drivers/platform/x86
The hp_accel driver isn't a hardware monitoring driver, so it doesn't
belong to drivers/hwmon. Move it to drivers/platform/x86, assuming HP
doesn't ship non-x86 laptops.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
Jean Delvare [Mon, 21 Mar 2011 16:59:35 +0000 (17:59 +0100)]
Let Kconfig handle lis3lv02d dependencies
The dependencies between the various lis3lv02d drivers make it
impossible to split them to different directories, while we really
want to do this. Move handling of dependencies from Makefile to
Kconfig, to make the move possible at all.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
Vivien Didelot [Mon, 21 Mar 2011 16:59:35 +0000 (17:59 +0100)]
hwmon: (sht15) Fix integer overflow in humidity calculation
An integer overflow occurs in the calculation of RHlinear when the
relative humidity is greater than around 30%. The consequence is a subtle
(but noticeable) error in the resulting humidity measurement.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Justin P. Mattock [Mon, 21 Mar 2011 16:59:35 +0000 (17:59 +0100)]
hwmon: (sht15) Spelling fix
Remove one too many "n" in a word.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Mon, 21 Mar 2011 16:59:35 +0000 (17:59 +0100)]
hwmon: (w83795) Document pin mapping
Apparently users are interested in this information, so let's provide
it.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Linus Torvalds [Mon, 21 Mar 2011 16:53:04 +0000 (09:53 -0700)]
Merge git://git./linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc: Add {open_by,name_to}_handle_at and clock_adjtime syscalls.
sparc: Implement of_iomap().
sparc: Implement of_address_to_resource().
sparc: Provide NO_IRQ definition.
Linus Torvalds [Mon, 21 Mar 2011 16:52:27 +0000 (09:52 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/ptrace: Remove BUG_ON when full register set not available
powerpc: Factoring mpic cpu id fetching into a function
powerpc: Make MPIC honor the "pic-no-reset" device tree property
powerpc: Document the Open PIC device tree binding
powerpc/pci: Fix crash in PCI code on ppc64 when matching device nodes
David Howells [Mon, 21 Mar 2011 14:28:58 +0000 (14:28 +0000)]
FS: lookup_mnt() is only used in the core fs routines now
lookup_mnt() is only used in the core fs routines now, so it doesn't need to
be globally declared anymore. It isn't exported to modules at the moment, so
nothing that can be modularised seems to be using it.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Miklos Szeredi [Mon, 21 Mar 2011 12:58:06 +0000 (13:58 +0100)]
fuse: make fuse_dentry_revalidate() RCU aware
Only bail out of fuse_dentry_revalidate() on LOOKUP_RCU when blocking
is actually necessary.
CC: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Miklos Szeredi [Mon, 21 Mar 2011 12:58:06 +0000 (13:58 +0100)]
fuse: make fuse_permission() RCU aware
Only bail out of fuse_permission() on IPERM_FLAG_RCU when blocking is
actually necessary.
CC: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Bryan Green [Wed, 2 Mar 2011 00:43:52 +0000 (16:43 -0800)]
fuse: wakeup pollers on connection release/abort
If a fuse dev connection is broken, wake up any
processes that are blocking, in a poll system call,
on one of the files in the now defunct filesystem.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Miklos Szeredi [Mon, 21 Mar 2011 12:58:05 +0000 (13:58 +0100)]
fuse: reduce size of struct fuse_request
Reduce the size of struct fuse_request by removing cuse_init_out from
the request structure and allocating it dinamically instead.
CC: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Akinobu Mita [Mon, 21 Mar 2011 12:32:53 +0000 (08:32 -0400)]
bfs: fix bitmap size argument to find_first_zero_bit()
The usage of find_first_zero_bit() in bfs_create() is wrong for two
reasons.
The bitmap size argument to find_first_zero_bit() is info->si_lasti but
the correct bitmap size is info->si_lasti + 1 as info->si_lasti is the
last valid index in info->si_imap bitmap.
Another problem is that it is impossible to detect that info->si_imap
bitmap is full because there is an off-by-one bug in the return value
check for find_first_zero_bit(). If no zero bits exist in info->si_imap,
find_first_zero_bit() returns info->si_lasti. But the check can't catch
it due to the off-by-one.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: "Tigran A. Aivazian" <tigran@aivazian.fsnet.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Michal Marek [Mon, 21 Mar 2011 09:44:30 +0000 (10:44 +0100)]
kbuild: Make DEBUG_SECTION_MISMATCH selectable, but not on by default
CONFIG_DEBUG_SECTION_MISMATCH has also runtime effects due to the
-fno-inline-functions-called-once compiler flag, so forcing it on
everyone is not a good idea.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Vasily Khoruzhick [Sun, 13 Mar 2011 13:53:28 +0000 (15:53 +0200)]
i2c-pxa2xx: Fix register offsets
Fix regression that was introduced by dynamic register layout.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Sebastian Andrzej Siewior [Wed, 23 Feb 2011 11:38:20 +0000 (12:38 +0100)]
i2c-pxa2xx: pass of_node from platform driver to adapter and publish
the of_node will auto-publish devices which are added to the device
tree.
Commit
925bb9c6 aka ("of/i2c: Fix module load order issue caused by
of_i2c.c) moved the of_i2c_register_devices() function from the i2c core
back to the drivers. This patch does the same thing for the pxa driver.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Sebastian Andrzej Siewior [Wed, 23 Feb 2011 11:38:19 +0000 (12:38 +0100)]
i2c-pxa2xx: check timeout correctly
timeout here maybe 0 if the event occured and a task with a higher
priority stole the cpu and we were sleeping longer than the timeout
value we specified.
In case of a real timeout I changed the error code to I2C_RETRY so we
retry the transfer.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Sebastian Andrzej Siewior [Wed, 23 Feb 2011 11:38:18 +0000 (12:38 +0100)]
i2c-pxa2xx: add support for shared IRQ handler
Sodaville has three of them on a single IRQ. IRQF_DISABLED is removed
because it is a NOP allready and scheduled for removal.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Sebastian Andrzej Siewior [Wed, 2 Mar 2011 10:26:53 +0000 (11:26 +0100)]
i2c-pxa2xx: Add PCI support for PXA I2C controller
The Sodaville I2C controller is almost the same as found on PXA2xx. The
difference:
- the register are at a different offset
- no slave support
The PCI probe code adds three platform devices which are probed then by
the platform code.
The X86 part also adds dummy clock defines because we don't have HW
clock support.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Sebastian Andrzej Siewior [Wed, 23 Feb 2011 11:38:16 +0000 (12:38 +0100)]
ARM: pxa2xx: reorganize I2C files
This patch moves the platform data definition from
arch/arm/plat-pxa/include/plat/i2c.h to include/linux/i2c/pxa-i2c.h so
it can be accessed from x86 the same way as on ARM.
This change should make no functional change to the PXA code. The move
is verified by building the following defconfigs:
cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig
imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig
raumfeld_defconfig magician_defconfig mmp2_defconfig pxa168_defconfig
pxa910_defconfig
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Sebastian Andrzej Siewior [Wed, 23 Feb 2011 11:38:15 +0000 (12:38 +0100)]
i2c-pxa2xx: use dynamic register layout
This will prepare the driver to handle register layouts where certain
registers are not available at all.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Tetsuo Handa [Wed, 19 Jan 2011 12:08:41 +0000 (21:08 +0900)]
fs: Use BUG_ON(!mnt) at dentry_open().
dentry_open() requires callers to pass a valid vfsmount.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Andrey Vagin [Mon, 7 Feb 2011 21:14:52 +0000 (00:14 +0300)]
fs: devpts_pty_new() return -ENOMEM if dentry allocation failed
In this case nobody can open a slave point, so will be better return
from devpts_pty_new()
Now we should not check error code from d_find_alias() in
devpts_pty_kill(), because the dentry exists all times.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Dan Carpenter [Sun, 20 Mar 2011 11:22:07 +0000 (14:22 +0300)]
nfs: lock() vs unlock() typo
These should be spin_unlock() instead of spin_lock(). It's a typo.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tony Luck [Fri, 18 Mar 2011 18:44:48 +0000 (11:44 -0700)]
pstore: fix leaking ->i_private
Move kfree() of i_private out of ->unlink() and into ->evict_inode()
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Sage Weil [Thu, 10 Mar 2011 19:31:30 +0000 (11:31 -0800)]
introduce sys_syncfs to sync a single file system
It is frequently useful to sync a single file system, instead of all
mounted file systems via sync(2):
- On machines with many mounts, it is not at all uncommon for some of
them to hang (e.g. unresponsive NFS server). sync(2) will get stuck on
those and may never get to the one you do care about (e.g., /).
- Some applications write lots of data to the file system and then
want to make sure it is flushed to disk. Calling fsync(2) on each
file introduces unnecessary ordering constraints that result in a large
amount of sub-optimal writeback/flush/commit behavior by the file
system.
There are currently two ways (that I know of) to sync a single super_block:
- BLKFLSBUF ioctl on the block device: That also invalidates the bdev
mapping, which isn't usually desirable, and doesn't work for non-block
file systems.
- 'mount -o remount,rw' will call sync_filesystem as an artifact of the
current implemention. Relying on this little-known side effect for
something like data safety sounds foolish.
Both of these approaches require root privileges, which some applications
do not have (nor should they need?) given that sync(2) is an unprivileged
operation.
This patch introduces a new system call syncfs(2) that takes an fd and
syncs only the file system it references. Maybe someday we can
$ sync /some/path
and not get
sync: ignoring all arguments
The syscall is motivated by comments by Al and Christoph at the last LSF.
syncfs(2) seems like an appropriate name given statfs(2).
A similar ioctl was also proposed a while back, see
http://marc.info/?l=linux-fsdevel&m=
127970513829285&w=2
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Holger Hans Peter Freyther [Thu, 24 Feb 2011 16:46:49 +0000 (17:46 +0100)]
Small typo fix...
Hi,
I was backporting the coredump over pipe feature and noticed this small typo,
I wish I would have something bigger to contribute...
>From
15d6080e0ed4267da103c706917a33b1015e8804 Mon Sep 17 00:00:00 2001
From: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Date: Thu, 24 Feb 2011 17:42:50 +0100
Subject: [PATCH] fs: Fix a small typo in the comment
The function is called umh_pipe_setup not uhm_pipe_setup.
Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
David Jenni [Wed, 23 Feb 2011 15:51:05 +0000 (16:51 +0100)]
Filesystem: fifo: Fixed coding style issue.
Fixed coding style issue.
Signed-off-by: David Jenni <dave.j@gmx.ch>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Ben Hutchings [Tue, 15 Feb 2011 12:48:09 +0000 (12:48 +0000)]
fs/inode: Fix kernel-doc format for inode_init_owner
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Namhyung Kim [Fri, 21 Jan 2011 04:59:59 +0000 (13:59 +0900)]
select: remove unused MAX_SELECT_SECONDS
Remove the leftover from the commit
8ff3e8e85fa6 ("select:
switch select() and poll() over to hrtimers").
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Namhyung Kim [Sun, 16 Jan 2011 15:48:17 +0000 (00:48 +0900)]
vfs: cleanup do_vfs_ioctl()
Move declaration of 'inode' to beginning of the function. Since it
is referenced directly or indirectly (in case of FIFREEZE/FITHAW/
FS_IOC_FIEMAP) it's not harmful IMHO. And remove unnecessary casts
using 'argp' instead.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Mon, 21 Mar 2011 01:14:55 +0000 (18:14 -0700)]
Merge branch 'trivial' of git://git./linux/kernel/git/mmarek/kbuild-2.6
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits)
video: change to new flag variable
scsi: change to new flag variable
rtc: change to new flag variable
rapidio: change to new flag variable
pps: change to new flag variable
net: change to new flag variable
misc: change to new flag variable
message: change to new flag variable
memstick: change to new flag variable
isdn: change to new flag variable
ieee802154: change to new flag variable
ide: change to new flag variable
hwmon: change to new flag variable
dma: change to new flag variable
char: change to new flag variable
fs: change to new flag variable
xtensa: change to new flag variable
um: change to new flag variables
s390: change to new flag variable
mips: change to new flag variable
...
Fix up trivial conflict in drivers/hwmon/Makefile
Linus Torvalds [Mon, 21 Mar 2011 01:13:09 +0000 (18:13 -0700)]
Merge branch 'misc' of git://git./linux/kernel/git/mmarek/kbuild-2.6
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
scripts/extract-ikconfig: add xz compression support
kbuild: add GNU GLOBAL tags generation
setlocalversion: update mercurial tag parsing
Linus Torvalds [Mon, 21 Mar 2011 01:12:42 +0000 (18:12 -0700)]
Merge branch 'packaging' of git://git./linux/kernel/git/mmarek/kbuild-2.6
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
kbuild: Add make tarxz-pkg build option
Linus Torvalds [Mon, 21 Mar 2011 00:54:13 +0000 (17:54 -0700)]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
i2c-i801: SMBus patch for Intel DH89xxCC DeviceIDs
i2c: Drop i2c_adapter.id
i2c: Deprecate i2c_driver.attach_adapter and .detach_adapter
i2c-dev: Use standard bus notification mechanism
i2c: Export i2c_for_each_dev
i2c: Get rid of <linux/i2c-id.h>
i2c: Minor fixes to upgrading-clients document
i2c: make i2c_get_adapter prototype clearer
i2c: Fix typo in instantiating-devices document
i2c-boardinfo: Fix typo in comment
Linus Torvalds [Mon, 21 Mar 2011 00:53:50 +0000 (17:53 -0700)]
Merge git://git./linux/kernel/git/cmetcalf/linux-tile
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
asm-generic: support clock_adjtime() in <asm-generic/unistd.h>
arch/tile: fix futex sanitization definition/prototype mismatch
Eric Dumazet [Sat, 19 Mar 2011 15:39:11 +0000 (16:39 +0100)]
r8169: fix a bug in rtl8169_init_phy()
commit
54405cde7624 (r8169: support control of advertising.)
introduced a bug in rtl8169_init_phy()
Reported-and-tested-by: Piotr Hosowicz <piotr@hosowicz.com>
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by:: Oliver Neukum <oliver@neukum.org>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Anca Emanuel <anca.emanuel@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Wolf [Mon, 21 Mar 2011 00:14:53 +0000 (11:14 +1100)]
powerpc/ptrace: Remove BUG_ON when full register set not available
In some cases during a threaded core dump not all the threads will have
a full register set. This happens when the signal causing the core dump
races with a thread exiting. The race happens when the exiting thread
has entered the kernel for the last time before the signal arrives, but
doesn't get far enough through the exit code to avoid being included
in the core dump.
So we get a thread included in the core dump which is never going to go
out to userspace again and only has a partial register set recorded
Normally we would catch each thread as it is about to go into userspace
and capture the full register set then.
However, this exiting thread is never going to go out to userspace
again, so we have no way to capture its full register set. It doesn't
really matter, though, as this is a thread which is effectively
already dead.
So instead of hitting a BUG() in this case (a really bad choice of
action in the first place), we use a poison value for the register
values.
[BenH]: Some cosmetic/stylistic changes and fix build on ppc32
Signed-off-by: Mike Wolf <mjw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Meador Inge [Mon, 14 Mar 2011 10:01:07 +0000 (10:01 +0000)]
powerpc: Factoring mpic cpu id fetching into a function
The following code snippet:
unsigned int cpu = 0;
if (mpic->flags & MPIC_PRIMARY)
cpu = hard_smp_processor_id();
is seen in several places in the 'mpic.c' code. This changeset factors
that pattern out into a helper function called 'mpic_processor_id'.
Signed-off-by: Meador Inge <meador_inge@mentor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Meador Inge [Mon, 14 Mar 2011 10:01:06 +0000 (10:01 +0000)]
powerpc: Make MPIC honor the "pic-no-reset" device tree property
This property, defined in the Open PIC binding, tells the kernel not to use
the reset bit in the global configuration register. Additionally, its
presence mandates that only sources which are actually used (i.e. appear in
the device tree) should have their VECPRI bits initialized.
Although, "pic-no-reset" can be used for the same use cases that
"protected-sources" is covering, the "protected-sources" implementation was
left completely intact. This is a more pragmatic approach as there are
already several existing systems which use protected sources. If
"pic-no-reset" *and* "protected-sources" are both used, however, then
"pic-no-reset" takes precedence in terms of the init behavior and the
sanity checks done by protected sources will still take place.
Signed-off-by: Meador Inge <meador_inge@mentor.com>
Cc: Hollis Blanchard <hollis_blanchard@mentor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Meador Inge [Mon, 14 Mar 2011 10:01:05 +0000 (10:01 +0000)]
powerpc: Document the Open PIC device tree binding
This binding documents several properties that have been in use for quite
some time, and adds one new property 'pic-no-reset', which controls the
runtime initialization behavior of the PIC. More specifically, the presence
of 'pic-no-reset' mandates that the PIC shall not be reset during runtime
initialization and that any initialization related to interrupt sources
shall be limited to sources explicitly referenced in the device tree. This
functionality is useful in AMP systems where multiple OSes are sharing the
PIC and the reinitialization of the PIC can interfere with OSes that are
already up and running.
The interrupt specifier definition is based off of Stuart Yoder's FSL MPIC
binding.
Signed-off-by: Meador Inge <meador_inge@mentor.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Stuart Yoder <stuart.yoder@freescale.com>
Cc: Hollis Blanchard <hollis_blanchard@mentor.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Sun, 20 Mar 2011 23:57:57 +0000 (10:57 +1100)]
powerpc/pci: Fix crash in PCI code on ppc64 when matching device nodes
Commit
b5d937de0367d26f65b9af1aef5f2c34c1939be0 has a bug which causes
basically a NULL dereference in the PCI code during boot on ppc64
machines.
fetch_dev_dn() is called when dev->dev.of_node is NULL, so using that
as the starting point for the search makes no sense. It should instead
start from the device node of the PHB.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Sascha Hauer [Fri, 25 Feb 2011 17:54:51 +0000 (18:54 +0100)]
i2c-mxs: set controller to pio queue mode after reset
mxs_reset_block() clears the PIO_QUEUE_MODE bit. So we have
to set it again after a controller reset.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Vasily Khoruzhick [Thu, 6 Jan 2011 19:52:52 +0000 (21:52 +0200)]
ARM: S3C2442: RX1950: Add support for LED blinking
Add .gpio_set_blink callback to support HW blinking
available on RX1950
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Vasily Khoruzhick [Thu, 6 Jan 2011 19:52:51 +0000 (21:52 +0200)]
ARM: S3C2442: RX1950: Retain LEDs state in suspend
s3c_adc_battery uses LEDs to indicate charging process,
retain LEDs state in suspend, otherwise user have no information if PDA
battery is charging after he put it to suspend.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Vasily Khoruzhick [Thu, 6 Jan 2011 19:52:50 +0000 (21:52 +0200)]
ARM: S3C2410: H1940: Fix lcd_power_set function
Current implementation of lcd_power_set is not reliable, sometimes
it does not enable LCD at all.
Mimic WinCE behavior to fix this issue.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Vasily Khoruzhick [Thu, 6 Jan 2011 19:52:49 +0000 (21:52 +0200)]
ARM: S3C2410: H1940: Add battery support
Add battery monitoring/charging support via pda_power and
s3c_adc_battery drivers
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Vasily Khoruzhick [Thu, 6 Jan 2011 19:52:48 +0000 (21:52 +0200)]
ARM: S3C2410: H1940: Use leds-gpio driver for LEDs managing
We can use generic leds-gpio driver, as latch api was converted
to gpiolib.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Vasily Khoruzhick [Thu, 6 Jan 2011 19:52:47 +0000 (21:52 +0200)]
ARM: S3C2410: H1940: Make h1940-bluetooth.c compile again
It was broken by removal of rfkill_set_led_trigger_name function,
and now compiler complains about implicit declaration.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Arnaud Patard (Rtp) [Thu, 6 Jan 2011 19:52:46 +0000 (21:52 +0200)]
ARM: S3C2410: H1940: Add keys device
Add buttons definition for H1940.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Sun, 20 Mar 2011 22:14:04 +0000 (22:14 +0000)]
Merge branch 'for-2639/i2c/i2c-u2c12' into for-linus/2639/i2c-12
David S. Miller [Sun, 20 Mar 2011 21:35:09 +0000 (14:35 -0700)]
Merge branch 'vhost-net-next' of git://git./linux/kernel/git/mst/vhost
David S. Miller [Sun, 20 Mar 2011 20:42:25 +0000 (13:42 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/kaber/nf-2.6
Pekka Enberg [Sun, 20 Mar 2011 16:13:26 +0000 (18:13 +0200)]
Merge branch 'slub/lockless' into for-linus
Conflicts:
include/linux/slub_def.h
Pekka Enberg [Sun, 20 Mar 2011 16:12:03 +0000 (18:12 +0200)]
Merge branch 'slab/next' into for-linus