Imre Deak [Tue, 15 Dec 2015 18:10:38 +0000 (20:10 +0200)]
drm/i915: check that we are in an RPM atomic section in GGTT PTE updaters
The device should be on for the whole duration of the update, so check
for this.
v2:
- use the existing dev_priv directly everywhere (Ville)
v3:
- check also that we are in an RPM atomic section (Chris)
- add the assert to i915_ggtt_insert_entries/clear_range too (Chris)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1450203038-5150-11-git-send-email-imre.deak@intel.com
Imre Deak [Tue, 15 Dec 2015 18:10:37 +0000 (20:10 +0200)]
drm/i915: add support for checking RPM atomic sections
In some cases we want to check whether we hold an RPM wakelock reference
for the whole duration of a sequence. To achieve this add a new RPM
atomic sequence counter that we increment any time the wakelock refcount
drops to zero. Check whether the sequence number stays the same during
the atomic section and that we hold the wakelock at the beginning of the
section.
Motivated by Chris.
v2-v3:
- unchanged
v4:
- swap the order of atomic_read() and assert_rpm_wakelock_held() in
assert_rpm_atomic_begin() to avoid race
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v3)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450203038-5150-10-git-send-email-imre.deak@intel.com
Imre Deak [Tue, 15 Dec 2015 18:10:36 +0000 (20:10 +0200)]
drm/i915: check that we hold an RPM wakelock ref before we put it
With this change we have the corresponding wake lock checks in both the
rpm get and put functions.
v2-v3:
- unchanged
v4:
- keep the corresponding check in the get helper (Chris)
v5:
- add a note to the commit message that with this change we have the
checks both in the rpm get and put functions (Joonas)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450203038-5150-9-git-send-email-imre.deak@intel.com
Imre Deak [Wed, 16 Dec 2015 00:52:19 +0000 (02:52 +0200)]
drm/i915: add support for checking if we hold an RPM reference
Atm, we assert that the device is not suspended until the point when the
device is truly put to a suspended state. This is fine, but we can catch
more problems if we check that RPM refcount is non-zero. After that one
drops to zero we shouldn't access the device any more, even if the actual
device suspend may be delayed. Change assert_rpm_wakelock_held()
accordingly to check for a non-zero RPM refcount in addition to the
current device-not-suspended check.
For the new asserts to work we need to annotate every place explicitly in
the code where we expect that the device is powered. The places where we
only assume this, but may not hold an RPM reference:
- driver load
We assume the device to be powered until we enable RPM. Make this
explicit by taking an RPM reference around the load function.
- system and runtime sudpend/resume handlers
These handlers are called when the RPM reference becomes 0 and know the
exact point after which the device can get powered off. Disable the
RPM-reference-held check for their duration.
- the IRQ, hangcheck and RPS work handlers
These handlers are flushed in the system/runtime suspend handler
before the device is powered off, so it's guaranteed that they won't
run while the device is powered off even though they don't hold any
RPM reference. Disable the RPM-reference-held check for their duration.
In all these cases we still check that the device is not suspended.
These explicit annotations also have the positive side effect of
documenting our assumptions better.
This caught additional WARNs from the atomic modeset path, those should
be fixed separately.
v2:
- remove the redundant HAS_RUNTIME_PM check (moved to patch 1) (Ville)
v3:
- use a new dedicated RPM wakelock refcount to also catch cases where
our own RPM get/put functions were not called (Chris)
- assert also that the new RPM wakelock refcount is 0 in the RPM
suspend handler (Chris)
- change the assert error message to be more meaningful (Chris)
- prevent false assert errors and check that the RPM wakelock is 0 in
the RPM resume handler too
- prevent false assert errors in the hangcheck work too
- add a device not suspended assert check to the hangcheck work
v4:
- rename disable/enable_rpm_asserts to disable/enable_rpm_wakeref_asserts
and wakelock_count to wakeref_count
- disable the wakeref asserts in the IRQ handlers and RPS work too
- update/clarify commit message
v5:
- mark places we plan to change to use proper RPM refcounting with
separate DISABLE/ENABLE_RPM_WAKEREF_ASSERTS aliases (Chris)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1450227139-13471-1-git-send-email-imre.deak@intel.com
Imre Deak [Tue, 15 Dec 2015 18:10:34 +0000 (20:10 +0200)]
drm/i915: use assert_rpm_wakelock_held instead of opencoding it
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1450203038-5150-7-git-send-email-imre.deak@intel.com
Imre Deak [Tue, 15 Dec 2015 18:10:33 +0000 (20:10 +0200)]
drm/i915: add assert_rpm_wakelock_held helper
As a preparation for follow-up patches add a new helper that checks
whether we hold an RPM reference, since this is what we want most of
the cases. Atm this helper will only check for the HW suspended state, a
follow-up patch will do the actual change to check the refcount instead.
One exception is the forcewake release timer function, where it's
guaranteed that the HW is on even though the RPM refcount drops to zero.
This guarantee is provided by flushing the timer in the runtime suspend
handler. So leave the assert_device_not_suspended check in place there.
Also rename assert_device_suspended for consistency and export these
helpers as a preparation for the follow-up patches.
No functional change.
v3:
- change the assert warning message to be more meaningful (Chris)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1450203038-5150-6-git-send-email-imre.deak@intel.com
Imre Deak [Thu, 17 Dec 2015 11:48:51 +0000 (13:48 +0200)]
drm/i915: remove HAS_RUNTIME_PM check from RPM get/put/assert helpers
We don't really need to check this flag in the get/put/assert helpers,
as on platforms without RPM support we won't ever enable RPM. That means
pm.suspend will be always false and the assert will be always true.
Do this to simplify the code and to let us extend the RPM asserts to all
platforms for a better coverage.
Motivated by Ville.
v2-v3:
- unchanged
v4:
- remove the HAS_RUNTIME_PM check from intel_runtime_pm_enable() too
made possible by the previous two patches
v5:
- rebased on the previous new patch in the series that keeps
HAS_RUNTIME_PM() in intel_runtime_pm_enable() with a permanent
reference taken there
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v3)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450352931-16498-1-git-send-email-imre.deak@intel.com
Imre Deak [Thu, 17 Dec 2015 11:44:56 +0000 (13:44 +0200)]
drm/i915: get a permanent RPM reference on platforms w/o RPM support
Currently we disable RPM functionality on platforms that doesn't support
this by not putting/getting the RPM reference we receive from the RPM
core during driver loading/unloading respectively. This is somewhat
obscure, so make it more explicit by keeping a reference dedicated for
this particular purpose whenever the driver is loaded. This makes it
possible to remove the HAS_RUNTIME_PM() special casing from every other
places in the next patch.
v2:
- fix intel_runtime_pm_get vs. intel_runtime_pm_put in
intel_power_domains_fini()
v3:
- take only a low level RPM reference so the ref tracking asserts
continue to work (Ville)
- update the commit message
- move the patch earlier for bisectability
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450352696-16135-1-git-send-email-imre.deak@intel.com
Imre Deak [Tue, 15 Dec 2015 18:10:31 +0000 (20:10 +0200)]
drm/i915: refactor RPM disabling due to RC6 being disabled
We can make the RPM dependency on RC6 explcit in the code by taking an
actual RPM reference, instead of avoiding to drop the initial one. This
will also enable us to remove the HAS_RUNTIME_PM special casing from
more places in the next patch.
v2:
- fixed typo in commit message (Joonas)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450203038-5150-4-git-send-email-imre.deak@intel.com
Imre Deak [Tue, 15 Dec 2015 18:10:29 +0000 (20:10 +0200)]
drm/i915: clarify comment about mandatory RPM put/get during driver load/unload
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450203038-5150-2-git-send-email-imre.deak@intel.com
Jani Nikula [Tue, 15 Dec 2015 11:18:00 +0000 (13:18 +0200)]
drm/i915/opregion: handle VBT sizes bigger than 6 KB
The RVDA and RVDS (raw VBT data address and size) fields of the ASLE
mailbox may specify an alternate location for VBT instead of mailbox #4.
Use the alternate location if available and valid, falling back to
mailbox #4 otherwise.
v2: Update debug logging (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178280-28020-1-git-send-email-jani.nikula@intel.com
Ville Syrjälä [Wed, 16 Dec 2015 16:10:00 +0000 (18:10 +0200)]
drm/i915: Fix AVI/HDMI/SPD infoframes on HSW+
I broke AVI/HDMI/SPD infoframes on HSW+ with the register type
safety changes. We were supposed to check that the infoframe data
register is valid before writing the infoframe data, but the check
ended up inverted, and so in practice we never wrote or enabled
these infoframes.
We were still sending out the GCP infoframe when the sink was
deep-color capable. That and the fact that we use a single
bool to track our infoframe state meant that the state checker
only caught this when a HDMI sink that doesn't do deep-color was
used.
We really need to fix our infoframe state checking to be much
more anal. But in the meantime let's just fix the regression.
In fact let's just throw out the register validity check and
convert some of the "unknown info frame type" debug messages
into MISSING_CASE(). So far we support the same set of infoframe
types on all platforms, so the silent debug messages make no
sense.
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes:
f0f59a00a1c9 ("drm/i915: Type safe register read/write")
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (irc)
Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (irc)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450282200-4203-1-git-send-email-ville.syrjala@linux.intel.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93119
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Wed, 16 Dec 2015 13:04:21 +0000 (15:04 +0200)]
drm/i915/bios: reduce indent in parse_general_features
Slightly cleaner with early exit.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450271061-32646-4-git-send-email-jani.nikula@intel.com
Jani Nikula [Wed, 16 Dec 2015 13:04:20 +0000 (15:04 +0200)]
drm/i915/bios: prefer using dev_priv over dev pointer
dev_priv is the new black. Or something.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450271061-32646-3-git-send-email-jani.nikula@intel.com
Jani Nikula [Wed, 16 Dec 2015 13:04:19 +0000 (15:04 +0200)]
drm/i915/bios: fix format string of the VBT signature logging
Specify the maximum number of letters to print from the potentially
unterminated buffer, not the minimum. While at it, use sizeof instead of
a magic number.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450271061-32646-2-git-send-email-jani.nikula@intel.com
Jani Nikula [Wed, 16 Dec 2015 13:04:18 +0000 (15:04 +0200)]
drm/i915: move drmP.h include to i915_drv.h
The intel_bios.h header doesn't even need it, but other headers included
from i915_drv.h do. Let's untangle the mess a bit.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450271061-32646-1-git-send-email-jani.nikula@intel.com
Jani Nikula [Wed, 16 Dec 2015 10:48:16 +0000 (12:48 +0200)]
drm/i915: prefer for_each_intel_* macros for iteration
Use the for_each_intel_* macros for iterating intel_encoder,
intel_connector, and intel_crtc. No functional changes.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450262896-5325-1-git-send-email-jani.nikula@intel.com
Jani Nikula [Tue, 15 Dec 2015 11:17:12 +0000 (13:17 +0200)]
drm/i915/debugfs: add a separate debugfs file for VBT
In the future the VBT might not be in mailbox #4 of the ACPI OpRegion,
thus unavailable in i915_opregion, so add a separate file for the VBT.
v2: Drop the locking as unneeded (Chris)
v3: Rebase
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178232-27780-1-git-send-email-jani.nikula@intel.com
Jani Nikula [Mon, 14 Dec 2015 10:50:53 +0000 (12:50 +0200)]
drm/i915: don't use a temp buffer for opregion debugfs file
Hasn't been necessary since
commit
115719fceaa733d646e39cdce83cc32ddb891a49
Author: Williams, Dan J <dan.j.williams@intel.com>
Date: Mon Oct 12 21:12:57 2015 +0000
i915: switch from acpi_os_ioremap to memremap
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/74664a556a56d0eceb0029bbd77ffc1d771b0628.1450089383.git.jani.nikula@intel.com
Jani Nikula [Mon, 14 Dec 2015 10:50:52 +0000 (12:50 +0200)]
drm/i915/opregion: make VBT pointer a const
Because we can. It's not to be touched so tell the compiler too.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/4b1872b121fb34a193cff9a5cb4e7c858d4a55aa.1450089383.git.jani.nikula@intel.com
Jani Nikula [Mon, 14 Dec 2015 10:50:51 +0000 (12:50 +0200)]
drm/i915/opregion: make VBT size limit more strict
The VBT in OpRegion should fit in mailbox #4.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/4bdb3f5820e3dbd1cdfa7b65cadfce4f80b880f0.1450089383.git.jani.nikula@intel.com
Jani Nikula [Tue, 15 Dec 2015 11:16:15 +0000 (13:16 +0200)]
drm/i915: refactor VBT validation
Make the validation function a boolean operating on a buffer of given
size, removing the extra pointer dances.
Move the OpRegion based VBT validation to intel_opregion_setup(), only
initializing opregion->vbt if it's valid.
v2: move logging about valid VBT to opregion setup too (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178175-27420-1-git-send-email-jani.nikula@intel.com
Jani Nikula [Mon, 14 Dec 2015 10:50:49 +0000 (12:50 +0200)]
drm/i915/bios: rename intel_parse_bios to intel_bios_init
While at it, move the declaration to where everything else is declared.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/7d9d879603038889f0128cf7cbbd9f591edc11dd.1450089383.git.jani.nikula@intel.com
Jani Nikula [Tue, 15 Dec 2015 11:14:52 +0000 (13:14 +0200)]
drm/i915/bios: move debug logging about VBT source to intel_parse_bios()
The decision about which source will be used for VBT is done in
intel_parse_bios(), not in the VBT validation function. Make the VBT
validation function strictly about validation, and move the debug
logging to where it logically belongs.
Also split the logging about where the valid VBT was found and what the
signature is. This will make even more sense in the future when the
validation for ACPI OpRegion based VBT takes place at OpRegion setup
time.
v2: Split logging about VBT signature and BDB version.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178092-27148-1-git-send-email-jani.nikula@intel.com
Jani Nikula [Mon, 14 Dec 2015 10:50:47 +0000 (12:50 +0200)]
drm/i915/bios: have functions return vbt, not bdb, header pointer
This will simplify further work.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/d2c5210402fdd8c277e1d50892b0620d10c50ae8.1450089383.git.jani.nikula@intel.com
Jani Nikula [Mon, 14 Dec 2015 10:50:46 +0000 (12:50 +0200)]
drm/i915: move "no VBT in opregion" quirk to intel_opregion_setup()
Check the quirk in intel_opregion_setup(), and don't initialize
opregion->vbt at all if the quirk says it's not present, hiding the
quirk from the rest of the driver.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/7cdc86eb441f8b7075142445a800b07ecf8c76cb.1450089383.git.jani.nikula@intel.com
Deepak M [Mon, 14 Dec 2015 10:50:45 +0000 (12:50 +0200)]
drm/i915: Add Intel opregion mailbox 5 structure
Mailbox 5 is BIOS to Driver Notification mailbox is intended
to support BIOS to Driver event notification or data storage
for BIOS to Driver data synchronization purpose. Mailbox 5 is
the extension of mailbox 3.
v4 by Jani:
- don't add asle_ext to dev_priv as it's unused
- use u8 for bddc and rsvd fields in asle ext struct
- add BUILD_BUG_ON the asle ext struct size
- debug logging for asle ext present
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Deepak M <m.deepak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/c2d4009659fca32280d9859ec34a62f45b86d895.1450089383.git.jani.nikula@intel.com
Ville Syrjälä [Mon, 14 Dec 2015 11:16:48 +0000 (13:16 +0200)]
drm/i915: Drop the broken cursor base==0 special casing
The cursor code tries to treat base==0 to mean disabled. That fails
when the cursor bo gets bound at ggtt offset 0, and the user is left
looking at an invisible cursor.
We lose the disabled->disabled optimization, but that seems like
something better handled at a slightly higher level.
Cc: drm-intel-fixes@lists.freedesktop.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450091808-32607-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 14 Dec 2015 15:35:02 +0000 (17:35 +0200)]
drm/i915: Kill intel_crtc->cursor_bo
The vma may have been rebound between the last time the cursor was
enabled and now, so skipping the cursor gtt offset deduction is not
safe unless we would also reset cursor_bo to NULL when disabling the
cursor. Just thow cursor_bo to the bin instead since it's lost all
other uses thanks to universal plane support.
Chris pointed out that cursor updates are currently too slow
via universal planes that micro optimizations like these wouldn't
even help.
v2: Add a note about futility of micro optimizations (Chris)
Cc: drm-intel-fixes@lists.freedesktop.org
References: http://lists.freedesktop.org/archives/intel-gfx/2015-December/082976.html
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450107302-17171-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Rodrigo Vivi [Sat, 12 Dec 2015 00:31:31 +0000 (16:31 -0800)]
drm/i915: PSR also doesn't have link_entry_time on SKL.
This bit is also reserved on Skylake. Actually the only
platform that supports this is Haswell, so let's fix
this logic and apply this link entry time only for the
platform that supports it, i.e. Haswell.
This also changes the style to let more clear platform
differences outside the reg write. We would probably catch
this case sooner if separated, or not...
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449880291-21388-1-git-send-email-rodrigo.vivi@intel.com
Daniel Vetter [Fri, 11 Dec 2015 18:28:27 +0000 (19:28 +0100)]
Merge tag 'drm-i915-get-eld' of tiwai/sound into drm-intel-next-queued
Add get_eld audio component for i915/HD-audio
Currently, the HDMI/DP audio status and ELD are notified and obtained
via the hardware-level communication over HD-audio unsolicited event
and verbs although the graphics driver holds the exactly same
information. As we already have a notification via audio component,
this is another step forward; namely, the audio driver may fetch
directly the audio status and ELD via the new component op.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Dave Gordon [Thu, 10 Dec 2015 18:51:24 +0000 (18:51 +0000)]
drm/i915: mark a newly-created GEM object dirty when filled with data
When creating a new (pageable) GEM object and filling it with data, we
must mark it as 'dirty', i.e. backing store is out-of-date w.r.t. the
newly-written content. This ensures that if the object is evicted under
memory pressure, its pages in the pagecache will be written to backing
store rather than discarded.
Based on an original version by Alex Dai.
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1449773486-30822-3-git-send-email-david.s.gordon@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Gordon [Thu, 10 Dec 2015 18:51:23 +0000 (18:51 +0000)]
drm/i915: mark GEM object pages dirty when mapped & written by the CPU
In various places, a single page of a (regular) GEM object is mapped into
CPU address space and updated. In each such case, either the page or the
the object should be marked dirty, to ensure that the modifications are
not discarded if the object is evicted under memory pressure.
The typical sequence is:
va = kmap_atomic(i915_gem_object_get_page(obj, pageno));
*(va+offset) = ...
kunmap_atomic(va);
Here we introduce i915_gem_object_get_dirty_page(), which performs the
same operation as i915_gem_object_get_page() but with the side-effect
of marking the returned page dirty in the pagecache. This will ensure
that if the object is subsequently evicted (due to memory pressure),
the changes are written to backing store rather than discarded.
Note that it works only for regular (shmfs-backed) GEM objects, but (at
least for now) those are the only ones that are updated in this way --
the objects in question are contexts and batchbuffers, which are always
shmfs-backed.
Separate patches deal with the cases where whole objects are (or may
be) dirtied.
v3: Mark two more pages dirty in the page-boundary-crossing
cases of the execbuffer relocation code [Chris Wilson]
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1449773486-30822-2-git-send-email-david.s.gordon@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tomas Elf [Fri, 23 Oct 2015 17:02:37 +0000 (18:02 +0100)]
drm/i915: Update to post-reset execlist queue clean-up
When clearing an execlist queue, instead of traversing it and unreferencing all
requests while holding the spinlock (which might lead to thread sleeping with
IRQs are turned off - bad news!), just move all requests to the retire request
list while holding spinlock and then drop spinlock and invoke the execlists
request retirement path, which already deals with the intricacies of
purging/dereferencing execlist queue requests.
This patch can be considered v3 of:
commit
b96db8b81c54ef30485ddb5992d63305d86ea8d3
Author: Tomas Elf <tomas.elf@intel.com>
drm/i915: Grab execlist spinlock to avoid post-reset concurrency issues
This patch assumes v2 of the above patch is part of the baseline, reverts v2
and adds changes on top to turn it into v3.
Signed-off-by: Tomas Elf <tomas.elf@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1445619757-19822-1-git-send-email-tomas.elf@intel.com
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Dave Gordon <dave.gordon@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Deepak M [Wed, 9 Dec 2015 14:44:04 +0000 (20:14 +0530)]
drm/i915: dual link pipe selection for bxt
Pipe is assigned based on the port, but it should be
based on current crtc. Correcting the same in this patch.
v2: Use macro BXT_PIPE_SELECT(pipe) (Daniel)
Signed-off-by: Deepak M <m.deepak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Deepak M [Mon, 30 Nov 2015 22:47:05 +0000 (04:17 +0530)]
drm/i915: add VBT address and size fields to ASLE mailbox struct
To be used on systems where the VBT does not fit into the normal VBT
mailbox.
v3: rebase
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Deepak M <m.deepak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448923632-16760-3-git-send-email-m.deepak@intel.com
[Jani: updated commit message]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Rodrigo Vivi [Thu, 10 Dec 2015 19:12:27 +0000 (11:12 -0800)]
drm/i915: Fix random aux transactions failures.
Mainly aux communications on sink_crc
were failing a lot randomly on recent platforms.
The first solution was to try to use intel_dp_dpcd_read_wake, but then
it was suggested to move retries to drm level.
Since drm level was already taking care of retries and didn't want
to through random retries on that level the second solution was to
put the retries at aux_transfer layer what was nacked.
So I realized we had so many retries in different places and
started to organize that a bit. During this organization I noticed
that we weren't handing at all the case were the message size was
zeroed. And this was exactly the case that was affecting sink_crc.
Also we weren't respect BSPec who says this size message = 0 or > 20
are forbidden.
It is a fact that we still have no clue why we are getting this
forbidden value there. But anyway we need to handle that for now
so we return -EBUSY and drm level takes care of the retries that
are already in place.
v2: Print debug messsage when this case is reached as suggested
by Jani.
v3: This patch is crucial to make PSR test cases reliably working
on SKL. So split this patch from the aux re-org series and add
a FIXME as a promisse to continue that effort besides reminding
to remove the sleep when that is merged.
v4: Use a bigger usleep range so kernel doesn't need to be interrupted
on a exact time, as suggested by Paulo.
But anyway we should discuss the better time
ranges on the EBUSY handle re-org at drm level since this one here
is temporary.
v5: s/1000,1500/1000, 1500/ (by Paulo).
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Daniel Stone <daniels@collabora.com> # SKL
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449774747-2772-1-git-send-email-rodrigo.vivi@intel.com
Dave Gordon [Tue, 8 Dec 2015 15:02:36 +0000 (15:02 +0000)]
drm/i915: intel_ring_initialized() must be simple and inline
Based on Chris Wilson's patch from 6 months ago, rebased and adapted.
The current implementation of intel_ring_initialized() is too heavyweight;
it's a non-inlined function that chases several levels of pointers. This
wouldn't matter too much if it were rarely called, but it's used inside
the iterator test of for_each_ring() and is therefore called quite
frequently. So let's make it simple and inline ...
The idea here is to use ring->dev as an indicator showing which engines
have been initialised and are therefore to be included in iterations that
use for_each_ring(). This allows us to avoid multiple memory references
and a (non-inlined) function call on each iteration of each such loop.
Fixes regression from
commit
48d823878d64f93163f5a949623346748bbce1b4
Author: Oscar Mateo <oscar.mateo@intel.com>
Date: Thu Jul 24 17:04:23 2014 +0100
drm/i915/bdw: Generic logical ring init and cleanup
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449586956-32360-2-git-send-email-david.s.gordon@intel.com
Takashi Iwai [Mon, 30 Nov 2015 17:19:39 +0000 (18:19 +0100)]
drm/i915: Add reverse mapping between port and intel_encoder
This patch adds a reverse mapping from a digital port number to
intel_encoder object containing the corresponding intel_digital_port.
It simplifies the query of the encoder a lot.
Note that, even if it's a valid digital port, the dig_port_map[] might
point still to NULL -- usually it implies a DP MST port. Due to this
fact, the NULL check in each place has no WARN_ON() and just skips the
port. Once when the situation changes in future, we might introduce
WARN_ON() for a more strict check.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 12 Nov 2015 14:23:41 +0000 (15:23 +0100)]
drm/i915: Add get_eld audio component
Implement a new i915_audio_component_ops, get_eld(). It's called by
the audio driver to fetch the current audio status and ELD of the
given HDMI/DP port. It returns the size of expected ELD bytes if it's
valid, zero if no valid ELD is found, or a negative error code. The
current state of audio on/off is stored in the given pointer, too.
Note that the returned size isn't limited to the given max bytes. If
the size is greater than the max bytes, it means that only a part of
ELD has been copied back.
For achieving this implementation, a new field audio_connector is
added to struct intel_digital_port. It points to the connector
assigned to the given digital port. It's set/reset at each audio
enable/disable call in intel_audio.c, and protected with av_mutex.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Maarten Lankhorst [Mon, 23 Nov 2015 09:25:28 +0000 (10:25 +0100)]
drm/i915: Do a better job at disabling primary plane in the noatomic case.
When disable_noatomic is called plane_mask is not correct yet, and
plane_state->visible = true is left as true after disabling the primary
plane.
Other planes are already disabled as part of crtc sanitization, only the
primary is left active. But the plane_mask is not updated here. It gets
updated during fb takeover in modeset_gem_init, or set to the new value
on resume.
This means that to disable the primary plane 1 << drm_plane_index(primary)
needs to be used.
Afterwards because the crtc is no longer active it's forbidden to keep
plane_state->visible set, or a WARN_ON in
intel_plane_atomic_calc_changes triggers. There are other code points
that rely on accurate plane_state->visible too, so make sure the bool is
cleared.
The other planes are already disabled in intel_sanitize_crtc, so they
don't have to be handled here.
Cc: stable@vger.kernel.org #v4.3, v4.2?
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92655
Tested-by: Tomas Mezzadra <tmezzadra@gmail.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/5652DB88.9070208@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Wayne Boyer [Mon, 7 Dec 2015 23:02:42 +0000 (15:02 -0800)]
drm/i915: Remove BUG_ON call in vlv_enable_pll
Do some further clean up based on the initial review of
drm/i915: Separate cherryview from valleyview.
In this case remove the BUG_ON call in vlv_enable_pll().
v2: Also remove the BUG_ON call in chv_enable_pll(). (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Wayne Boyer <wayne.boyer@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449529362-18193-1-git-send-email-wayne.boyer@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Wayne Boyer [Tue, 8 Dec 2015 17:38:52 +0000 (09:38 -0800)]
drm/i915: Only set gem object L3 cache level for IVB devices
Do some further clean up based on the initial review of
drm/i915: Separate cherryview from valleyview.
In this case, in i915_gem_alloc_context_obj() only call
i915_gem_object_set_cache_level() for Ivy Bridge devices
since later platforms don't have L3 control bits in the PTE.
v2: Expand comment to mention snooping requirement. (Ville, Imre)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Wayne Boyer <wayne.boyer@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449596332-23470-1-git-send-email-wayne.boyer@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Wayne Boyer [Mon, 7 Dec 2015 18:51:08 +0000 (10:51 -0800)]
drm/i915: Remove VLV A0 hack
Do some further clean up based on the initial review of
drm/i915: Separate cherryview from valleyview.
In this case remove a hack for VLV A0.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Wayne Boyer <wayne.boyer@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449514270-15171-4-git-send-email-wayne.boyer@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Wayne Boyer [Mon, 7 Dec 2015 18:51:07 +0000 (10:51 -0800)]
drm/i915: Use HAS_PCH_SPLIT to determine correct devices
Do some further clean up based on the initial review of
drm/i915: Separate cherryview from valleyview.
In this case check for '(GEN7 || GEN8) && HAS_PCH_SPLIT' since we're
reading FUSE_STRAP and SFUSE_STRAP which live in the PCH.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Wayne Boyer <wayne.boyer@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449514270-15171-3-git-send-email-wayne.boyer@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Wayne Boyer [Wed, 9 Dec 2015 20:29:35 +0000 (12:29 -0800)]
drm/i915: Separate cherryview from valleyview
The cherryview device shares many characteristics with the valleyview
device. When support was added to the driver for cherryview, the
corresponding device info structure included .is_valleyview = 1.
This is not correct and leads to some confusion.
This patch changes .is_valleyview to .is_cherryview in the cherryview
device info structure and simplifies the IS_CHERRYVIEW macro.
Then where appropriate, instances of IS_VALLEYVIEW are replaced with
IS_VALLEYVIEW || IS_CHERRYVIEW or equivalent.
v2: Use IS_VALLEYVIEW || IS_CHERRYVIEW instead of defining a new macro.
Also add followup patches to fix issues discovered during the first
review. (Ville)
v3: Fix some style issues and one gen check. Remove CRT related changes
as CRT is not supported on CHV. (Imre, Ville)
v4: Make a few more optimizations. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Wayne Boyer <wayne.boyer@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449692975-14803-1-git-send-email-wayne.boyer@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Joonas Lahtinen [Wed, 9 Dec 2015 13:56:13 +0000 (15:56 +0200)]
drm/i915: Cancel hangcheck before GPU is suspended
In order to avoid accessing GPU registers while GPU is suspended cancel
the hangcheck work before calling intel_suspend_complete which actually
puts the GPU to suspend. Otherwise hangcheck might do MMIO reads to a
suspended GPU.
Placement before intel_guc_suspend is imitated from i915_drm_suspend
which cancels the work at i915_gem_suspend, to keep the functions
similar.
On VLV systems, namely BYT, this was causing an error during runtime
suspend cycle:
[drm:vlv_check_no_gt_access [i915]] *ERROR* GT register access while GT waking disabled
Testcase: igt/pm_rpm/basic-rte
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93121
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1449669373-8588-1-git-send-email-joonas.lahtinen@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Libin Yang [Wed, 2 Dec 2015 06:09:44 +0000 (14:09 +0800)]
drm/i915: start adding dp mst audio
This patch adds support for DP MST audio in i915.
Enable audio codec when DP MST is enabled if has_audio flag is set.
Disable audio codec when DP MST is disabled if has_audio flag is set.
Another separated patches to support DP MST audio will be implemented
in audio driver.
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449036584-105393-2-git-send-email-libin.yang@linux.intel.com
Libin Yang [Wed, 2 Dec 2015 06:09:43 +0000 (14:09 +0800)]
dp/mst: add SDP stream support
This adds code to initialise the SDP streams
for a sink in the simplest ordering.
I've no idea how you'd want to control the
ordering at this level, so don't bother
until someone comes up with a use case.
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449036584-105393-1-git-send-email-libin.yang@linux.intel.com
Dave Gordon [Tue, 8 Dec 2015 13:30:51 +0000 (13:30 +0000)]
drm/i915: eliminate 'temp' in gen8_for_each_{pdd, pdpe, pml4e} macros
All of these iterator macros require a 'temp' argument, used merely to
hold internal partial results. We can instead declare the temporary
variable inside the macro, so the caller need not provide it.
Some of the old code contained nested iterators that actually reused the
same 'temp' variable for both inner and outer instances. It's quite
surprising that this didn't introduce bugs! But it does show that the
value of 'temp' isn't required to persist during the iterated body.
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449581451-11848-2-git-send-email-david.s.gordon@intel.com
Rodrigo Vivi [Wed, 9 Dec 2015 15:51:59 +0000 (07:51 -0800)]
drm/i915/kbl: Fix DMC load on Kabylake.
Kabylake A0 is based on Skylake H0.
v2: Don't assume revid+7 and only load the one we are sure about.
v3: Rebase on top of latest changes.
v4: Accept cleaner solution from Jani with kbl_stepping_info
starting on H0 instead of put a hack on revid.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449676319-6959-1-git-send-email-rodrigo.vivi@intel.com
Sudip Mukherjee [Thu, 8 Oct 2015 13:58:00 +0000 (19:28 +0530)]
drm/i915: check for return value
We were not checking the return value of drm_encoder_init() which can
fail. And if it fails then we will be working with an uninitialized
encoder.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1444312681-10149-2-git-send-email-sudipm.mukherjee@gmail.com
Chris Wilson [Tue, 8 Dec 2015 11:55:07 +0000 (11:55 +0000)]
drm/i915: Add soft-pinning API for execbuffer
Userspace can pass in an offset that it presumes the object is located
at. The kernel will then do its utmost to fit the object into that
location. The assumption is that userspace is handling its own object
locations (for example along with full-ppgtt) and that the kernel will
rarely have to make space for the user's requests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
v2: Fixed incorrect eviction found by Michal Winiarski - fix suggested by Chris
Wilson. Fixed incorrect error paths causing crash found by Michal Winiarski.
(Not published externally)
v3: Rebased because of trivial conflict in object_bind_to_vm. Fixed eviction
to allow eviction of soft-pinned objects when another soft-pinned object used
by a subsequent execbuffer overlaps reported by Michal Winiarski.
(Not published externally)
v4: Moved soft-pinned objects to the front of ordered_vmas so that they are
pinned first after an address conflict happens to avoid repeated conflicts in
rare cases (Suggested by Chris Wilson). Expanded comment on
drm_i915_gem_exec_object2.offset to cover this new API.
v5: Added I915_PARAM_HAS_EXEC_SOFTPIN parameter for detecting this capability
(Kristian). Added check for multiple pinnings on eviction (Akash). Made sure
buffers are not considered misplaced without the user specifying
EXEC_OBJECT_SUPPORTS_48B_ADDRESS. User must assume responsibility for any
addressing workarounds. Updated object2.offset field comment again to clarify
NO_RELOC case (Chris). checkpatch cleanup.
v6: Trivial rebase on latest drm-intel-nightly
v7: Catch attempts to pin above the max virtual address size and return
EINVAL (Tvrtko). Decouple EXEC_OBJECT_SUPPORTS_48B_ADDRESS and
EXEC_OBJECT_PINNED flags, user must pass both flags in any attempt to pin
something at an offset above 4GB (Chris, Daniel Vetter).
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Zou Nanhai <nanhai.zou@intel.com>
Cc: Kristian Høgsberg <hoegsberg@gmail.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Acked-by: PDT
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449575707-20933-1-git-send-email-thomas.daniel@intel.com
Julia Lawall [Tue, 8 Dec 2015 20:55:27 +0000 (21:55 +0100)]
drm/i915: constify intel_dvo_dev_ops structures
The intel_dvo_dev_ops structures are never modified, so declare them as
const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449608127-21715-1-git-send-email-Julia.Lawall@lip6.fr
Rodrigo Vivi [Wed, 9 Dec 2015 00:58:38 +0000 (16:58 -0800)]
drm/i915/kbl: drm/i915: Avoid GuC loading for now on Kabylake.
GuC has no version for KBL published yet and it is not recommended
to load the Skylake one, so let's avoid loading this for now while
we don't have the proper GuC firmware for Kabylake.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Alex Dai <yu.dai@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449622718-21684-1-git-send-email-rodrigo.vivi@intel.com
Rodrigo Vivi [Wed, 9 Dec 2015 00:58:37 +0000 (16:58 -0800)]
drm/i915/kbl: Use propper ddi buffer translation table for Kabylake ULT and ULX.
Let's introduce ULT and ULX Kabylake definitions and start
using it for a propper DDI buffer translation.
v2: Remove extra white space. (Paulo)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Imre Deak [Thu, 4 Dec 2014 16:39:35 +0000 (18:39 +0200)]
drm/i915: vlv: clamp minimum RPS frequency to what Punit allows
As described in the code comment, I couldn't set the minimum RPS
frequency on my BYT-M B0 to the minimum allowed as reported by Punit.
Fix this by clamping the minimum value to the first one that was
accepted on my machine.
Atm this issue doesn't cause any test failures, since in igt/pm_rps we
only check the cached version of the current frequency which is the same
what has been set. In the future we'll add checks for the actual
frequency too, and for that to pass this fix is necessary.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1417711175-13271-1-git-send-email-imre.deak@intel.com
Ville Syrjälä [Fri, 4 Dec 2015 20:22:50 +0000 (22:22 +0200)]
drm/i915: Leave FDI running after failed link training on LPT-H
Currently we disable some parts of FDI setup after a failed link
training. But despite that we continue with the modeset as if everything
is fine. This results in tons of noise from the state checker, and
it means we're not following the proper modeset sequence for the rest of
crtc enabling, nor for crtc disabling.
Ideally we should abort the modeset and follow the proper disable
sequence to shut off everything we enabled so far, but that would
require a big rework of the modeset code. So instead just leave FDI
up and running in its untrained state, and log an error. This is
what we do on older platforms too.
v2: Fix a typo in the commit message
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449260570-14670-1-git-send-email-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 4 Dec 2015 20:22:14 +0000 (22:22 +0200)]
drm/i915: Disable LPT-H VGA dotclock during crtc disable
Currently we leave the LPT-H VGA dotclock running after turning
the pipe/fdi/port/etc. Properly disable the VGA dotclock as
specified in the modeset sequence.
v2: Fix commit message typo (Paulo)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449260534-14551-1-git-send-email-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 4 Dec 2015 20:21:34 +0000 (22:21 +0200)]
drm/i915: Refactor LPT-H VGA dotclock disabling
Extract the LPT-H VGA dotclock disable to a separate function in
anticipation of further use.
While at it move the sb_lock locking inwards when enabling the VGA
dotclock, as it's only needed to protect the sideband accesses.
v2: Keep the PIXCLK_GATE_GATE name for 0 (Paulo)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449260494-14449-1-git-send-email-ville.syrjala@linux.intel.com
Ville Syrjälä [Tue, 8 Dec 2015 14:05:48 +0000 (16:05 +0200)]
drm/i915: Disable FDI after the CRT port on LPT-H
Bspec modeset sequence tells us to disable the PCH transcoder and
FDI after the CRT port on LPT-H, so let's do that. And the CRT port
should be disabled after the pipe, as we do on other PCH platforms
too since
commit
1ea56e269e13 ("drm/i915: Disable CRT port after pipe on PCH platforms")
commit
00490c22b1b5 ("drm/i915: Consider SPLL as another shared pll, v2.")
moved the SPLL disable from the .post_disable() hook to some upper
level code, so we can just move the CRT port disabling into the
.post_disable() hook. If we still had the non-shared SPLL, it would have
needed to be moved into the .post_pll_disable() hook.
v2: Actually move the CRT port disable to the .post_disable() hook,
and amend the commit message with more details (Paulo)
v3: Fix typos in commit message (Paulo)
Cc: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449583548-11896-1-git-send-email-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 4 Dec 2015 20:20:21 +0000 (22:20 +0200)]
drm/i915: Round to closest when computing the VGA dotclock for LPT-H
Bspec says we should round to closest when computing the LPT-H VGA
dotclock, so let's do that.
v2: Fix typo in commit message (Paulo)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449260421-14243-1-git-send-email-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 4 Dec 2015 20:19:39 +0000 (22:19 +0200)]
drm/i915: Disable CLKOUT_DP bending on LPT/WPT as needed
When we want to use SPLL for FDI we want SSC, which means we have to
disable clock bending for the PCH SSC reference (bend and spread are
mutually exclusive). So let's turn off bending when we want spread.
In case the BIOS enabled clock bending for some reason we'll just turn
it off and enable the spread mode instead.
Not sure what happens if the BIOS is actually using the bend source for
HDMI at this time, but I suppose it should be no worse than what already
happens when we simply turn on the spread.
We don't currently use the bend source for anything, and only use the
PCH SSC reference for the SPLL to drive FDI (always with spread).
v2: Fix the %5 vs %10 fumble for SSCDITHPHASE (Paulo)
Add 'WARN_ON(steps % 5 != 0)' sanity check (Paulo)
Fix typos in commit message (Paulo)
Cc: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449260379-14093-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Mika Kuoppala [Mon, 7 Dec 2015 16:29:45 +0000 (18:29 +0200)]
drm/i915/skl: Double RC6 WRL always on
WaRsDoubleRc6WrlWithCoarsePowerGating should
be enabled for all Skylakes. Make it so.
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449505785-20812-2-git-send-email-mika.kuoppala@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Mika Kuoppala [Mon, 7 Dec 2015 16:29:44 +0000 (18:29 +0200)]
drm/i915/skl: Disable coarse power gating up until F0
There is conflicting info between E0 and F0 steppings
for this workarounds. Trust more authoritative source and
be conservative and extend also for F0.
This prevents numerous (>50) gpu hangs with SKL GT4e
during piglit run.
References: HSD: gen9lp/2134184
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449505785-20812-1-git-send-email-mika.kuoppala@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Dave Airlie [Tue, 8 Dec 2015 01:04:26 +0000 (11:04 +1000)]
Back merge tag 'v4.4-rc4' into drm-next
We've picked up a few conflicts and it would be nice
to resolve them before we move onwards.
Rodrigo Vivi [Mon, 7 Dec 2015 22:45:20 +0000 (14:45 -0800)]
drm/i915: Fix idle_frames counter.
'commit
97173eaf5 ("drm/i915: PSR: Increase idle_frames")' was a mistake.
The special case it tried to cover was already being covered by
the DP_PSR_NO_TRAIN_ON_EXIT. So this ended up duplicated.
So, instead of reverting that let's take this opportunity and unify
the idle_frame definition in a single place so we standardize the access
and avoid room for that same mistake again.
Few changes with this patch:
1. Instead of just respecting the VBT we set a
global minumum with max(). So we are sure that we will avoid corner cases
in case VBT is doing something we don't understand.
2. Instead of minimum 5 we use 6. When introducing the idle_frames += 4 case
we considered that minimum was 2. All because the off-by-one issue.
v2: Unified idle_frame definition.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449528320-27655-1-git-send-email-rodrigo.vivi@intel.com
Maarten Lankhorst [Thu, 19 Nov 2015 15:07:17 +0000 (16:07 +0100)]
drm/i915: Remove double wait_for_vblank on broadwell.
wait_vblank is already set in intel_plane_atomic_calc_changes
for broadwell, waiting for a double vblank is overkill.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447945645-32005-5-git-send-email-maarten.lankhorst@linux.intel.com
Maarten Lankhorst [Thu, 19 Nov 2015 15:07:16 +0000 (16:07 +0100)]
drm/i915/skl: Update watermarks before the crtc is disabled.
On skylake some of the registers are only writable when the correct
power wells are enabled. Because of this watermarks have to be updated
before the crtc turns off, or you get unclaimed register read and write
warnings.
This patch needs to be modified slightly to apply to -fixes.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92181
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447945645-32005-4-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Maarten Lankhorst [Thu, 3 Dec 2015 12:49:13 +0000 (13:49 +0100)]
drm/i915: Calculate watermark related members in the crtc_state, v4.
This removes pre/post_wm_update from intel_crtc->atomic, and
creates atomic state for it in intel_crtc.
Changes since v1:
- Rebase on top of wm changes.
Changes since v2:
- Split disable_cxsr into a separate patch.
Changes since v3:
- Move some of the changes to intel_wm_need_update.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/56603A49.5000507@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Thu, 19 Nov 2015 15:07:14 +0000 (16:07 +0100)]
drm/i915: Move disable_cxsr to the crtc_state.
intel_crtc->atomic will be removed later on, move this member
to intel_crtc_state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447945645-32005-2-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Dave Airlie [Mon, 7 Dec 2015 08:17:09 +0000 (18:17 +1000)]
Merge tag 'topic/drm-misc-2015-12-04' of git://anongit.freedesktop.org/drm-intel into drm-next
New -misc pull. Big thing is Thierry's atomic helpers for system suspend
resume, which I'd like to use in i915 too. Hence the pull.
* tag 'topic/drm-misc-2015-12-04' of git://anongit.freedesktop.org/drm-intel:
drm: keep connector status change logging human readable
drm/atomic-helper: Reject attempts at re-stealing encoders
drm/atomic-helper: Implement subsystem-level suspend/resume
drm: Implement drm_modeset_lock_all_ctx()
drm/gma500: Add driver private mutex for the fault handler
drm/gma500: Drop dev->struct_mutex from mmap offset function
drm/gma500: Drop dev->struct_mutex from fbdev init/teardown code
drm/gma500: Drop dev->struct_mutex from modeset code
drm/gma500: Use correct unref in the gem bo create function
drm/edid: Make the detailed timing CEA/HDMI mode fixup accept up to 5kHz clock difference
drm/atomic_helper: Add drm_atomic_helper_disable_planes_on_crtc()
drm: Serialise multiple event readers
drm: Drop dev->event_lock spinlock around faulting copy_to_user()
Zeng Zhaoxiu [Sun, 6 Dec 2015 10:26:30 +0000 (18:26 +0800)]
i915: Replace "hweight8(dev_priv->info.subslice_7eu[i]) != 1" with "!is_power_of_2(dev_priv->info.subslice_7eu[i])"
Signed-off-by: Zeng Zhaoxiu <zhaoxiu.zeng@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449397590-14292-1-git-send-email-zhaoxiu.zeng@gmail.com
Linus Torvalds [Sun, 6 Dec 2015 23:43:12 +0000 (15:43 -0800)]
Linux 4.4-rc4
James Simmons [Fri, 4 Dec 2015 23:23:08 +0000 (18:23 -0500)]
staging/lustre: remove IOC_LIBCFS_PING_TEST ioctl
The ioctl IOC_LIBCFS_PING_TEST has not been used in ages. The recent
nidstring changes which moved all the nidstring operations from libcfs
to the LNet layer but this ioctl code was still using an nidstring
operation that was causing a circular dependency loop between libcfs and
LNet.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 6 Dec 2015 21:51:49 +0000 (13:51 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"A couple of fixes (-stable fodder) + dead code removal after the
overlayfs fix.
I agree that it's better to separate from the fix part to make
backporting easier, but IMO it's not worth delaying said dead code
removal until the next window"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Don't reset ->total_link_count on nested calls of vfs_path_lookup()
ovl: get rid of the dead code left from broken (and disabled) optimizations
ovl: fix permission checking for setattr
Al Viro [Sun, 6 Dec 2015 17:33:02 +0000 (12:33 -0500)]
Don't reset ->total_link_count on nested calls of vfs_path_lookup()
we already zero it on outermost set_nameidata(), so initialization in
path_init() is pointless and wrong. The same DoS exists on pre-4.2
kernels, but there a slightly different fix will be needed.
Cc: stable@vger.kernel.org # v4.2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 6 Dec 2015 17:31:07 +0000 (12:31 -0500)]
ovl: get rid of the dead code left from broken (and disabled) optimizations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Miklos Szeredi [Fri, 4 Dec 2015 18:18:48 +0000 (19:18 +0100)]
ovl: fix permission checking for setattr
[Al Viro] The bug is in being too enthusiastic about optimizing ->setattr()
away - instead of "copy verbatim with metadata" + "chmod/chown/utimes"
(with the former being always safe and the latter failing in case of
insufficient permissions) it tries to combine these two. Note that copyup
itself will have to do ->setattr() anyway; _that_ is where the elevated
capabilities are right. Having these two ->setattr() (one to set verbatim
copy of metadata, another to do what overlayfs ->setattr() had been asked
to do in the first place) combined is where it breaks.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sun, 6 Dec 2015 16:35:05 +0000 (08:35 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"This updates contains the following changes:
- Fix a signal handling regression in the bit wait functions.
- Avoid false positive warnings in the wakeup path.
- Initialize the scheduler root domain properly.
- Handle gtime calculations in proc/$PID/stat proper.
- Add more documentation for the barriers in try_to_wake_up().
- Fix a subtle race in try_to_wake_up() which might cause a task to
be scheduled on two cpus
- Compile static helper function only when it is used"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix an SMP ordering race in try_to_wake_up() vs. schedule()
sched/core: Better document the try_to_wake_up() barriers
sched/cputime: Fix invalid gtime in proc
sched/core: Clear the root_domain cpumasks in init_rootdomain()
sched/core: Remove false-positive warning from wake_up_process()
sched/wait: Fix signal handling in bit wait helpers
sched/rt: Hide the push_irq_work_func() declaration
Linus Torvalds [Sun, 6 Dec 2015 16:08:56 +0000 (08:08 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thoma Gleixner:
"Another round of fixes for x86:
- Move the initialization of the microcode driver to late_initcall to
make sure everything that init function needs is available.
- Make sure that lockdep knows about interrupts being off in the
entry code before calling into c-code.
- Undo the cpu hotplug init delay regression.
- Use the proper conditionals in the mpx instruction decoder.
- Fixup restart_syscall for x32 tasks.
- Fix the hugepage regression on PAE kernels which was introduced
with the latest PAT changes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/signal: Fix restart_syscall number for x32 tasks
x86/mpx: Fix instruction decoder condition
x86/mm: Fix regression with huge pages on PAE
x86 smpboot: Re-enable init_udelay=0 by default on modern CPUs
x86/entry/64: Fix irqflag tracing wrt context tracking
x86/microcode: Initialize the driver late when facilities are up
Linus Torvalds [Sun, 6 Dec 2015 16:02:25 +0000 (08:02 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is quite a bumper crop of fixes: three from Arnd correcting
various build issues in some configurations, a lock recursion in
qla2xxx. Two potentially exploitable issues in hpsa and mvsas, a
potential null deref in st, a revert of a bdi registration fix that
turned out to cause even more problems, a set of fixes to allow people
who only defined MPT2SAS to still work after the mpt2/mpt3sas merger
and a couple of fixes for issues turned up by the hyper-v storvsc
driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
mpt3sas: fix Kconfig dependency problem for mpt2sas back compatibility
Revert "scsi: Fix a bdi reregistration race"
mpt3sas: Add dummy Kconfig option for backwards compatibility
Fix a memory leak in scsi_host_dev_release()
block/sd: Fix device-imposed transfer length limits
scsi_debug: fix prevent_allow+verify regressions
MAINTAINERS: Add myself as co-maintainer of the SCSI subsystem.
sd: Make discard granularity match logical block size when LBPRZ=1
scsi: hpsa: select CONFIG_SCSI_SAS_ATTR
scsi: advansys needs ISA dma api for ISA support
scsi_sysfs: protect against double execution of __scsi_remove_device()
st: fix potential null pointer dereference.
scsi: report 'INQUIRY result too short' once per host
advansys: fix big-endian builds
qla2xxx: Fix rwlock recursion
hpsa: logical vs bitwise AND typo
mvsas: don't allow negative timeouts
mpt3sas: Fix use sas_is_tlr_enabled API before enabling MPI2_SCSIIO_CONTROL_TLR_ON flag
Linus Torvalds [Sun, 6 Dec 2015 00:06:30 +0000 (16:06 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A bunch of change across the board, the main things are some vblank
fallout in radeon and nouveau required some work, but I think this
should fix it all. There is also one drm fix for an oops in vmwgfx
with how we pass the drm master around.
The rest is just some amdgpu, i915, imx and rockchip fixes.
Probably more than I'd like at this point, but hopefully things settle
down now"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (40 commits)
drm/amdgpu: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v3)
drm/radeon: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v2)
drm/radeon: Retry DDC probing on DVI on failure if we got an HPD interrupt
drm/amdgpu: add spin lock to protect freed list in vm (v2)
drm/amdgpu: partially revert "drm/amdgpu: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR" v2
drm/amdgpu: take a BO reference for the user fence
drm/amdgpu: take a BO reference in the display code
drm/amdgpu: set snooped flags only on system addresses v2
drm/nouveau: Fix pre-nv50 pageflip events (v4)
drm: Fix an unwanted master inheritance v2
drm/amdgpu: fix race condition in amd_sched_entity_push_job
drm/amdgpu: add err check for pin userptr
drm/i915: take a power domain reference while checking the HDMI live status
drm/i915: add MISSING_CASE to a few port/aux power domain helpers
drm/i915/ddi: fix intel_display_port_aux_power_domain() after HDMI detect
drm/i915: Introduce a gmbus power domain
drm/i915: Clean up AUX power domain handling
drm/rockchip: Use CRTC vblank event interface
drm/rockchip: Fix module autoload for OF platform driver
drm/rockchip: vop: fix window origin calculation
...
Linus Torvalds [Sat, 5 Dec 2015 18:46:44 +0000 (10:46 -0800)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a couple of crypto drivers that were using memcmp to verify
authentication tags. They now use crypto_memneq instead"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: talitos - Fix timing leak in ESP ICV verification
crypto: nx - Fix timing leak in GCM and CCM decryption
Dmitry V. Levin [Mon, 30 Nov 2015 21:54:36 +0000 (00:54 +0300)]
x86/signal: Fix restart_syscall number for x32 tasks
When restarting a syscall with regs->ax == -ERESTART_RESTARTBLOCK,
regs->ax is assigned to a restart_syscall number. For x32 tasks, this
syscall number must have __X32_SYSCALL_BIT set, otherwise it will be
an x86_64 syscall number instead of a valid x32 syscall number. This
issue has been there since the introduction of x32.
Reported-by: strace/tests/restart_syscall.test
Reported-and-tested-by: Elvira Khabirova <lineprinter0@gmail.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Cc: Elvira Khabirova <lineprinter0@gmail.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20151130215436.GA25996@altlinux.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Dave Hansen [Tue, 1 Dec 2015 00:31:13 +0000 (16:31 -0800)]
x86/mpx: Fix instruction decoder condition
MPX decodes instructions in order to tell which bounds register
was violated. Part of this decoding involves looking at the "REX
prefix" which is a special instrucion prefix used to retrofit
support for new registers in to old instructions.
The X86_REX_*() macros are defined to return actual bit values:
#define X86_REX_R(rex) ((rex) & 4)
*not* boolean values. However, the MPX code was checking for
them like they were booleans. This might have led to us
mis-decoding the "REX prefix" and giving false information out to
userspace about bounds violations. X86_REX_B() actually is bit 1,
so this is really only broken for the X86_REX_X() case.
Fix the conditionals up to tolerate the non-boolean values.
Fixes:
fcc7ffd67991 "x86, mpx: Decode MPX instruction to get bound violation information"
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20151201003113.D800C1E0@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Dave Airlie [Sat, 5 Dec 2015 06:15:38 +0000 (16:15 +1000)]
Merge branch 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux into drm-next
A few more last minute fixes for 4.4 on top of my pull request from
earlier this week. The big change here is a vblank regression fix due to
commit
4dfd6486 "drm: Use vblank timestamps to guesstimate how many vblanks
were missed". Beyond that, a hotplug fix and a few VM fixes.
* 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v3)
drm/radeon: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v2)
drm/radeon: Retry DDC probing on DVI on failure if we got an HPD interrupt
drm/amdgpu: add spin lock to protect freed list in vm (v2)
drm/amdgpu: partially revert "drm/amdgpu: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR" v2
drm/amdgpu: take a BO reference for the user fence
drm/amdgpu: take a BO reference in the display code
drm/amdgpu: set snooped flags only on system addresses v2
drm/amdgpu: fix race condition in amd_sched_entity_push_job
drm/amdgpu: add err check for pin userptr
add blacklist for thinkpad T40p
drm/amdgpu: fix VM page table reference counting
drm/amdgpu: fix userptr flags check
Daniel Vetter [Fri, 4 Dec 2015 16:55:47 +0000 (17:55 +0100)]
drm/i915: Update DRIVER_DATE to
20151204
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Linus Torvalds [Fri, 4 Dec 2015 20:46:07 +0000 (12:46 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client
Pull Ceph fix from Sage Weil:
"This addresses a refcounting bug that leads to a use-after-free"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: don't put snap_context twice in rbd_queue_workfn()
Alex Deucher [Thu, 3 Dec 2015 17:31:56 +0000 (12:31 -0500)]
drm/amdgpu: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v3)
commit
4dfd6486 "drm: Use vblank timestamps to guesstimate how many
vblanks were missed" introduced in Linux 4.4-rc1 makes the drm core
more fragile to drivers which don't update hw vblank counters and
vblank timestamps in sync with firing of the vblank irq and
essentially at leading edge of vblank.
This exposed a problem with radeon-kms/amdgpu-kms which do not
satisfy above requirements:
The vblank irq fires a few scanlines before start of vblank, but
programmed pageflips complete at start of vblank and
vblank timestamps update at start of vblank, whereas the
hw vblank counter increments only later, at start of vsync.
This leads to problems like off by one errors for vblank counter
updates, vblank counters apparently going backwards or vblank
timestamps apparently having time going backwards. The net result
is stuttering of graphics in games, or little hangs, as well as
total failure of timing sensitive applications.
See bug #93147 for an example of the regression on Linux 4.4-rc:
https://bugs.freedesktop.org/show_bug.cgi?id=93147
This patch tries to align all above events better from the
viewpoint of the drm core / of external callers to fix the problem:
1. The apparent start of vblank is shifted a few scanlines earlier,
so the vblank irq now always happens after start of this extended
vblank interval and thereby drm_update_vblank_count() always samples
the updated vblank count and timestamp of the new vblank interval.
To achieve this, the reporting of scanout positions by
radeon_get_crtc_scanoutpos() now operates as if the vblank starts
radeon_crtc->lb_vblank_lead_lines before the real start of the hw
vblank interval. This means that the vblank timestamps which are based
on these scanout positions will now update at this earlier start of
vblank.
2. The driver->get_vblank_counter() function will bump the returned
vblank count as read from the hw by +1 if the query happens after
the shifted earlier start of the vblank, but before the real hw increment
at start of vsync, so the counter appears to increment at start of vblank
in sync with the timestamp update.
3. Calls from vblank irq-context and regular non-irq calls are now
treated identical, always simulating the shifted vblank start, to
avoid inconsistent results for queries happening from vblank irq vs.
happening from drm_vblank_enable() or vblank_disable_fn().
4. The radeon_flip_work_func will delay mmio programming a pageflip until
the start of the real vblank iff it happens to execute inside the shifted
earlier start of the vblank, so pageflips now also appear to execute at
start of the shifted vblank, in sync with vblank counter and timestamp
updates. This to avoid some races between updates of vblank count and
timestamps that are used for swap scheduling and pageflip execution which
could cause pageflips to execute before the scheduled target vblank.
The lb_vblank_lead_lines "fudge" value is calculated as the size of
the display controllers line buffer in scanlines for the given video
mode: Vblank irq's are triggered by the line buffer logic when the line
buffer refill for a video frame ends, ie. when the line buffer source read
position enters the hw vblank. This means that a vblank irq could fire at
most as many scanlines before the current reported scanout position of the
crtc timing generator as the number of scanlines the line buffer can
maximally hold for a given video mode.
This patch has been successfully tested on a RV730 card with DCE-3 display
engine and on a evergreen card with DCE-4 display engine, in single-display
and dual-display configuration, with different video modes.
A similar patch is needed for amdgpu-kms to fix the same problem.
Limitations:
- Maybe replace the udelay() in the flip_work_func() by a suitable
usleep_range() for a bit better efficiency? Will try that.
- Line buffer sizes in pixels are hard-coded on < DCE-4 to a value
i just guessed to be high enough to work ok, lacking info on the true
sizes atm.
Probably fixes: fdo#93147
Port of Mario's radeon fix to amdgpu.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(v1) Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
(v2) Refine amdgpu_flip_work_func() for better efficiency.
In amdgpu_flip_work_func, replace the busy waiting udelay(5)
with event lock held by a more performance and energy efficient
usleep_range() until at least predicted true start of hw vblank,
with some slack for scheduler happiness. Release the event lock
during waits to not delay other outputs in doing their stuff, as
the waiting can last up to 200 usecs in some cases.
Also small fix to code comment and formatting in that function.
(v2) Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
(v3) Fix crash in crtc disabled case
Linus Torvalds [Fri, 4 Dec 2015 19:30:45 +0000 (11:30 -0800)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
- NFIT parsing regression fixes from Linda. The nvdimm hot-add
implementation merged in 4.4-rc1 interpreted the specification in a
way that breaks actual HPE platforms. We are also closing the loop
with the ACPI Working Group to get this clarification added to the
spec.
- Andy pointed out that his laptop without nvdimm resources is loading
the e820-nvdimm module by default, fix that up to only load the
module when an e820-type-12 range is present.
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nfit: Adjust for different _FIT and NFIT headers
nfit: Fix the check for a successful NFIT merge
nfit: Account for table size length variation
libnvdimm, e820: skip module loading when no type-12
Mika Kuoppala [Fri, 6 Nov 2015 12:11:16 +0000 (14:11 +0200)]
drm/i915/skl: Add SKL GT4 PCI IDs
Add Skylake Intel Graphics GT4 PCI IDs
v2: Rebase
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1446811876-303-1-git-send-email-mika.kuoppala@intel.com
Linus Torvalds [Fri, 4 Dec 2015 18:17:20 +0000 (10:17 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull ARM KVM fixes from Paolo Bonzini:
- a series of fixes to deal with the aliasing between the sp and xzr
register
- a fix for the cache flush fix that went in -rc3
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
ARM/arm64: KVM: correct PTE uncachedness check
arm64: KVM: Get rid of old vcpu_reg()
arm64: KVM: Correctly handle zero register in system register accesses
arm64: KVM: Remove const from struct sys_reg_params
arm64: KVM: Correctly handle zero register during MMIO
Mario Kleiner [Wed, 25 Nov 2015 19:14:31 +0000 (20:14 +0100)]
drm/radeon: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v2)
commit
4dfd6486 "drm: Use vblank timestamps to guesstimate how many
vblanks were missed" introduced in Linux 4.4-rc1 makes the drm core
more fragile to drivers which don't update hw vblank counters and
vblank timestamps in sync with firing of the vblank irq and
essentially at leading edge of vblank.
This exposed a problem with radeon-kms/amdgpu-kms which do not
satisfy above requirements:
The vblank irq fires a few scanlines before start of vblank, but
programmed pageflips complete at start of vblank and
vblank timestamps update at start of vblank, whereas the
hw vblank counter increments only later, at start of vsync.
This leads to problems like off by one errors for vblank counter
updates, vblank counters apparently going backwards or vblank
timestamps apparently having time going backwards. The net result
is stuttering of graphics in games, or little hangs, as well as
total failure of timing sensitive applications.
See bug #93147 for an example of the regression on Linux 4.4-rc:
https://bugs.freedesktop.org/show_bug.cgi?id=93147
This patch tries to align all above events better from the
viewpoint of the drm core / of external callers to fix the problem:
1. The apparent start of vblank is shifted a few scanlines earlier,
so the vblank irq now always happens after start of this extended
vblank interval and thereby drm_update_vblank_count() always samples
the updated vblank count and timestamp of the new vblank interval.
To achieve this, the reporting of scanout positions by
radeon_get_crtc_scanoutpos() now operates as if the vblank starts
radeon_crtc->lb_vblank_lead_lines before the real start of the hw
vblank interval. This means that the vblank timestamps which are based
on these scanout positions will now update at this earlier start of
vblank.
2. The driver->get_vblank_counter() function will bump the returned
vblank count as read from the hw by +1 if the query happens after
the shifted earlier start of the vblank, but before the real hw increment
at start of vsync, so the counter appears to increment at start of vblank
in sync with the timestamp update.
3. Calls from vblank irq-context and regular non-irq calls are now
treated identical, always simulating the shifted vblank start, to
avoid inconsistent results for queries happening from vblank irq vs.
happening from drm_vblank_enable() or vblank_disable_fn().
4. The radeon_flip_work_func will delay mmio programming a pageflip until
the start of the real vblank iff it happens to execute inside the shifted
earlier start of the vblank, so pageflips now also appear to execute at
start of the shifted vblank, in sync with vblank counter and timestamp
updates. This to avoid some races between updates of vblank count and
timestamps that are used for swap scheduling and pageflip execution which
could cause pageflips to execute before the scheduled target vblank.
The lb_vblank_lead_lines "fudge" value is calculated as the size of
the display controllers line buffer in scanlines for the given video
mode: Vblank irq's are triggered by the line buffer logic when the line
buffer refill for a video frame ends, ie. when the line buffer source read
position enters the hw vblank. This means that a vblank irq could fire at
most as many scanlines before the current reported scanout position of the
crtc timing generator as the number of scanlines the line buffer can
maximally hold for a given video mode.
This patch has been successfully tested on a RV730 card with DCE-3 display
engine and on a evergreen card with DCE-4 display engine, in single-display
and dual-display configuration, with different video modes.
A similar patch is needed for amdgpu-kms to fix the same problem.
Limitations:
- Line buffer sizes in pixels are hard-coded on < DCE-4 to a value
i just guessed to be high enough to work ok, lacking info on the true
sizes atm.
Fixes: fdo#93147
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
(v1) Tested-by: Dave Witbrodt <dawitbro@sbcglobal.net>
(v2) Refine radeon_flip_work_func() for better efficiency:
In radeon_flip_work_func, replace the busy waiting udelay(5)
with event lock held by a more performance and energy efficient
usleep_range() until at least predicted true start of hw vblank,
with some slack for scheduler happiness. Release the event lock
during waits to not delay other outputs in doing their stuff, as
the waiting can last up to 200 usecs in some cases.
Retested on DCE-3 and DCE-4 to verify it still works nicely.
(v2) Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lyude [Thu, 3 Dec 2015 23:26:07 +0000 (18:26 -0500)]
drm/radeon: Retry DDC probing on DVI on failure if we got an HPD interrupt
HPD signals on DVI ports can be fired off before the pins required for
DDC probing actually make contact, due to the pins for HPD making
contact first. This results in a HPD signal being asserted but DDC
probing failing, resulting in hotplugging occasionally failing.
This is somewhat rare on most cards (depending on what angle you plug
the DVI connector in), but on some cards it happens constantly. The
Radeon R5 on the machine used for testing this patch for instance, runs
into this issue just about every time I try to hotplug a DVI monitor and
as a result hotplugging almost never works.
Rescheduling the hotplug work for a second when we run into an HPD
signal with a failing DDC probe usually gives enough time for the rest
of the connector's pins to make contact, and fixes this issue.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
jimqu [Fri, 4 Dec 2015 09:17:00 +0000 (17:17 +0800)]
drm/amdgpu: add spin lock to protect freed list in vm (v2)
there is a protection fault about freed list when OCL test.
add a spin lock to protect it.
v2: drop changes in vm_fini
Signed-off-by: JimQu <jim.qu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Christian König [Thu, 3 Dec 2015 19:54:35 +0000 (20:54 +0100)]
drm/amdgpu: partially revert "drm/amdgpu: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR" v2
The gtt_end is already inclusive, we don't need to subtract one here.
v2 (chk): keep the fix for the VM code, cause here it really applies.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Anatoli Antonovitch <anatoli.antonovitch@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 3 Dec 2015 18:55:52 +0000 (19:55 +0100)]
drm/amdgpu: take a BO reference for the user fence
No need for a GEM reference here.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 3 Dec 2015 18:55:51 +0000 (19:55 +0100)]
drm/amdgpu: take a BO reference in the display code
No need for the GEM reference here.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Paolo Bonzini [Fri, 4 Dec 2015 17:32:32 +0000 (18:32 +0100)]
Merge tag 'kvm-arm-for-v4.4-rc4' of git://git./linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/ARM fixes for v4.4-rc4
- A series of fixes to deal with the aliasing between the sp and xzr register
- A fix for the cache flush fix that went in -rc3
projects / platform / kernel / linux-rpi.git / log