Roman Gushchin [Thu, 1 Oct 2020 20:07:49 +0000 (13:07 -0700)]
mm: memcg/slab: fix slab statistics in !SMP configuration
Since commit
ea426c2a7de8 ("mm: memcg: prepare for byte-sized vmstat
items") the write side of slab counters accepts a value in bytes and
converts it to pages. It happens in __mod_node_page_state().
However a non-SMP version of __mod_node_page_state() doesn't perform
this conversion. It leads to incorrect (unrealistically high) slab
counters values. Fix this by adding a similar conversion to the non-SMP
version of __mod_node_page_state().
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-and-tested-by: Bastian Bittorf <bb@npl.de>
Fixes:
ea426c2a7de8 ("mm: memcg: prepare for byte-sized vmstat items")
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 2 Oct 2020 02:14:36 +0000 (19:14 -0700)]
pipe: remove pipe_wait() and fix wakeup race with splice
The pipe splice code still used the old model of waiting for pipe IO by
using a non-specific "pipe_wait()" that waited for any pipe event to
happen, which depended on all pipe IO being entirely serialized by the
pipe lock. So by checking the state you were waiting for, and then
adding yourself to the wait queue before dropping the lock, you were
guaranteed to see all the wakeups.
Strictly speaking, the actual wakeups were not done under the lock, but
the pipe_wait() model still worked, because since the waiter held the
lock when checking whether it should sleep, it would always see the
current state, and the wakeup was always done after updating the state.
However, commit
0ddad21d3e99 ("pipe: use exclusive waits when reading or
writing") split the single wait-queue into two, and in the process also
made the "wait for event" code wait for _two_ wait queues, and that then
showed a race with the wakers that were not serialized by the pipe lock.
It's only splice that used that "pipe_wait()" model, so the problem
wasn't obvious, but Josef Bacik reports:
"I hit a hang with fstest btrfs/187, which does a btrfs send into
/dev/null. This works by creating a pipe, the write side is given to
the kernel to write into, and the read side is handed to a thread that
splices into a file, in this case /dev/null.
The box that was hung had the write side stuck here [pipe_write] and
the read side stuck here [splice_from_pipe_next -> pipe_wait].
[ more details about pipe_wait() scenario ]
The problem is we're doing the prepare_to_wait, which sets our state
each time, however we can be woken up either with reads or writes. In
the case above we race with the WRITER waking us up, and re-set our
state to INTERRUPTIBLE, and thus never break out of schedule"
Josef had a patch that avoided the issue in pipe_wait() by just making
it set the state only once, but the deeper problem is that pipe_wait()
depends on a level of synchonization by the pipe mutex that it really
shouldn't. And the whole "wait for any pipe state change" model really
isn't very good to begin with.
So rather than trying to work around things in pipe_wait(), remove that
legacy model of "wait for arbitrary pipe event" entirely, and actually
create functions that wait for the pipe actually being readable or
writable, and can do so without depending on the pipe lock serializing
everything.
Fixes:
0ddad21d3e99 ("pipe: use exclusive waits when reading or writing")
Link: https://lore.kernel.org/linux-fsdevel/bfa88b5ad6f069b2b679316b9e495a970130416c.1601567868.git.josef@toxicpanda.com/
Reported-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 1 Oct 2020 19:59:36 +0000 (12:59 -0700)]
Merge tag 'iommu-fixes-v5.9-rc7' of git://git./linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix a device reference counting bug in the Exynos IOMMU driver.
- Lockdep fix for the Intel VT-d driver.
- Fix a bug in the AMD IOMMU driver which caused corruption of the IVRS
ACPI table and caused IOMMU driver initialization failures in kdump
kernels.
* tag 'iommu-fixes-v5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix lockdep splat in iommu_flush_dev_iotlb()
iommu/amd: Fix the overwritten field in IVMD header
iommu/exynos: add missing put_device() call in exynos_iommu_of_xlate()
Linus Torvalds [Thu, 1 Oct 2020 18:49:01 +0000 (11:49 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"A previous commit to prevent AML memory opregions from accessing the
kernel memory turned out to be too restrictive. Relax the permission
check to permit the ACPI core to map kernel memory used for table
overrides"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: permit ACPI core to map kernel memory used for table overrides
Linus Torvalds [Thu, 1 Oct 2020 16:45:37 +0000 (09:45 -0700)]
Merge tag 'drm-fixes-2020-10-01-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"AMD and vmwgfx fixes.
Just dequeuing these a bit early as the AMD ones are bit larger than
I'd prefer, but Alex missed last week so it's a double set of fixes.
The larger ones are just register header fixes for the new chips that
were just introduced in rc1 along with some new PCI IDs for new hw.
Otherwise it is usual fixes.
The vmwgfx fix was due to some testing I was doing and found we
weren't booting properly, vmware had the fix internally so hurried it
vmwgfx:
- fix a regression due to TTM refactor
amdgpu:
- Fix potential double free in userptr handling
- Sienna Cichlid and Navy Flounder udpates
- Add Sienna Cichlid PCI IDs
- Drop experimental flag for navi12
- Raven fixes
- Renoir fixes
- HDCP fix
- DCN3 fix for clang and older versions of gcc
- Fix a runtime pm refcount issue"
* tag 'drm-fixes-2020-10-01-1' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: disable gfxoff temporarily for navy_flounder
drm/amd/pm: setup APU dpm clock table in SMU HW initialization
drm/vmwgfx: Fix error handling in get_node
drm/amd/display: remove duplicate call to rn_vbios_smu_get_smu_version()
drm/amdgpu/swsmu/smu12: fix force clock handling for mclk
drm/amdgpu: restore proper ref count in amdgpu_display_crtc_set_config
drm/amdgpu/display: fix CFLAGS setup for DCN30
drm/amd/display: fix return value check for hdcp_work
drm/amdgpu: remove gpu_info fw support for sienna_cichlid etc.
drm/amd/pm: Removed fixed clock in auto mode DPM
drm/amdgpu: remove experimental flag from navi12
drm/amdgpu: add device ID for sienna_cichlid (v2)
drm/amdgpu: use the AV1 defines for VCN 3.0
drm/amdgpu: add VCN 3.0 AV1 registers
drm/amdgpu: add the GC 10.3 VRS registers
drm/amdgpu: prevent double kfree ttm->sg
Linus Torvalds [Thu, 1 Oct 2020 16:41:02 +0000 (09:41 -0700)]
Merge tag 'trace-v5.9-rc6' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two tracing fixes:
- Fix temp buffer accounting that caused a WARNING for
ftrace_dump_on_opps()
- Move the recursion check in one of the function callback helpers to
the beginning of the function, as if the rcu_is_watching() gets
traced, it will cause a recursive loop that will crash the kernel"
* tag 'trace-v5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Move RCU is watching check after recursion check
tracing: Fix trace_find_next_entry() accounting of temp buffer size
Lu Baolu [Sun, 27 Sep 2020 06:24:28 +0000 (14:24 +0800)]
iommu/vt-d: Fix lockdep splat in iommu_flush_dev_iotlb()
Lock(&iommu->lock) without disabling irq causes lockdep warnings.
[ 12.703950] ========================================================
[ 12.703962] WARNING: possible irq lock inversion dependency detected
[ 12.703975] 5.9.0-rc6+ #659 Not tainted
[ 12.703983] --------------------------------------------------------
[ 12.703995] systemd-udevd/284 just changed the state of lock:
[ 12.704007]
ffffffffbd6ff4d8 (device_domain_lock){..-.}-{2:2}, at:
iommu_flush_dev_iotlb.part.57+0x2e/0x90
[ 12.704031] but this lock took another, SOFTIRQ-unsafe lock in the past:
[ 12.704043] (&iommu->lock){+.+.}-{2:2}
[ 12.704045]
and interrupts could create inverse lock ordering between
them.
[ 12.704073]
other info that might help us debug this:
[ 12.704085] Possible interrupt unsafe locking scenario:
[ 12.704097] CPU0 CPU1
[ 12.704106] ---- ----
[ 12.704115] lock(&iommu->lock);
[ 12.704123] local_irq_disable();
[ 12.704134] lock(device_domain_lock);
[ 12.704146] lock(&iommu->lock);
[ 12.704158] <Interrupt>
[ 12.704164] lock(device_domain_lock);
[ 12.704174]
*** DEADLOCK ***
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200927062428.13713-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Adrian Huang [Sat, 26 Sep 2020 10:26:02 +0000 (18:26 +0800)]
iommu/amd: Fix the overwritten field in IVMD header
Commit
387caf0b759a ("iommu/amd: Treat per-device exclusion
ranges as r/w unity-mapped regions") accidentally overwrites
the 'flags' field in IVMD (struct ivmd_header) when the I/O
virtualization memory definition is associated with the
exclusion range entry. This leads to the corrupted IVMD table
(incorrect checksum). The kdump kernel reports the invalid checksum:
ACPI BIOS Warning (bug): Incorrect checksum in table [IVRS] - 0x5C, should be 0x60 (
20200717/tbprint-177)
AMD-Vi: [Firmware Bug]: IVRS invalid checksum
Fix the above-mentioned issue by modifying the 'struct unity_map_entry'
member instead of the IVMD header.
Cleanup: The *exclusion_range* functions are not used anymore, so
get rid of them.
Fixes:
387caf0b759a ("iommu/amd: Treat per-device exclusion ranges as r/w unity-mapped regions")
Reported-and-tested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200926102602.19177-1-adrianhuang0701@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Dave Airlie [Thu, 1 Oct 2020 05:25:32 +0000 (15:25 +1000)]
Merge tag 'amd-drm-fixes-5.9-2020-09-30' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.9-2020-09-30:
amdgpu:
- Fix potential double free in userptr handling
- Sienna Cichlid and Navy Flounder udpates
- Add Sienna Cichlid PCI IDs
- Drop experimental flag for navi12
- Raven fixes
- Renoir fixes
- HDCP fix
- DCN3 fix for clang and older versions of gcc
- Fix a runtime pm refcount issue
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200930161326.4243-1-alexander.deucher@amd.com
Ard Biesheuvel [Tue, 29 Sep 2020 13:25:22 +0000 (15:25 +0200)]
arm64: permit ACPI core to map kernel memory used for table overrides
Jonathan reports that the strict policy for memory mapped by the
ACPI core breaks the use case of passing ACPI table overrides via
initramfs. This is due to the fact that the memory type used for
loading the initramfs in memory is not recognized as a memory type
that is typically used by firmware to pass firmware tables.
Since the purpose of the strict policy is to ensure that no AML or
other ACPI code can manipulate any memory that is used by the kernel
to keep its internal state or the state of user tasks, we can relax
the permission check, and allow mappings of memory that is reserved
and marked as NOMAP via memblock, and therefore not covered by the
linear mapping to begin with.
Fixes:
1583052d111f ("arm64/acpi: disallow AML memory opregions to access kernel memory")
Fixes:
325f5585ec36 ("arm64/acpi: disallow writeable AML opregion mapping for EFI code regions")
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20200929132522.18067-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Wed, 30 Sep 2020 21:18:38 +0000 (14:18 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Another batch of clk driver fixes:
- Make sure DRAM and ChipID region doesn't get disabled on Exynos
- Fix a SATA failure on Tegra
- Fix the emac_ptp clk divider on stratix10"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: socfpga: stratix10: fix the divider for the emac_ptp_free_clk
clk: samsung: exynos4: mark 'chipid' clock as CLK_IGNORE_UNUSED
clk: tegra: Fix missing prototype for tegra210_clk_register_emc()
clk: tegra: Always program PLL_E when enabled
clk: tegra: Capitalization fixes
clk: samsung: Keep top BPLL mux on Exynos542x enabled
Jiansong Chen [Wed, 30 Sep 2020 07:30:24 +0000 (15:30 +0800)]
drm/amdgpu: disable gfxoff temporarily for navy_flounder
gfxoff is temporarily disabled for navy_flounder, since
at present the feature caused some tdr when performing
display operations.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 30 Sep 2020 04:07:56 +0000 (12:07 +0800)]
drm/amd/pm: setup APU dpm clock table in SMU HW initialization
As the dpm clock table is needed during DC HW initialization.
And that (DC HW initialization) comes before smu_late_init()
where current APU dpm clock table setup is performed. So, NULL
pointer dereference will be triggered. By moving APU dpm clock
table setup to smu_hw_init(), this can be avoided.
Fixes:
02cf91c113ea ("drm/amd/powerplay: postpone operations not required for hw setup to late_init")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Wed, 30 Sep 2020 04:21:22 +0000 (14:21 +1000)]
Merge branch 'vmwgfx-fixes-5.9' of git://people.freedesktop.org/~sroland/linux into drm-fixes
One vmwgfx regression fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Roland Scheidegger (VMware)" <rscheidegger.oss@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200930041000.2423-1-rscheidegger.oss@gmail.com
Zack Rusin [Fri, 25 Sep 2020 15:54:10 +0000 (11:54 -0400)]
drm/vmwgfx: Fix error handling in get_node
ttm_mem_type_manager_func.get_node was changed to return -ENOSPC
instead of setting the node pointer to NULL. Unfortunately
vmwgfx still had two places where it was explicitly converting
-ENOSPC to 0 causing regressions. This fixes those spots by
allowing -ENOSPC to be returned. That seems to fix recent
regressions with vmwgfx.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Sigend-off-by: Roland Scheidegger <sroland@vmware.com>
Linus Torvalds [Wed, 30 Sep 2020 00:56:30 +0000 (17:56 -0700)]
Merge tag 'devicetree-fixes-for-5.9-3' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix handling of HOST_EXTRACFLAGS for dtc
- Several warning fixes for DT bindings
* tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting
dt-bindings: Fix 'reg' size issues in zynqmp examples
ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfd
dt-bindings: leds: cznic,turris-omnia-leds: fix error in binding
dt-bindings: crypto: sa2ul: fix a DT binding check warning
Linus Torvalds [Wed, 30 Sep 2020 00:18:34 +0000 (17:18 -0700)]
autofs: use __kernel_write() for the autofs pipe writing
autofs got broken in some configurations by commit
13c164b1a186
("autofs: switch to kernel_write") because there is now an extra LSM
permission check done by security_file_permission() in rw_verify_area().
autofs is one if the few places that really does want the much more
limited __kernel_write(), because the write is an internal kernel one
that shouldn't do any user permission checks (it also doesn't need the
file_start_write/file_end_write logic, since it's just a pipe).
There are a couple of other cases like that - accounting, core dumping,
and splice - but autofs stands out because it can be built as a module.
As a result, we need to export this internal __kernel_write() function
again.
We really don't want any other module to use this, but we don't have a
"EXPORT_SYMBOL_FOR_AUTOFS_ONLY()". But we can mark it GPL-only to at
least approximate that "internal use only" for licensing.
While in this area, make autofs pass in NULL for the file position
pointer, since it's always a pipe, and we now use a NULL file pointer
for streaming file descriptors (see file_ppos() and commit
438ab720c675:
"vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files")
This effectively reverts commits
9db977522449 ("fs: unexport
__kernel_write") and
13c164b1a186 ("autofs: switch to kernel_write").
Fixes:
13c164b1a186 ("autofs: switch to kernel_write")
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dirk Gouders [Sun, 27 Sep 2020 09:39:45 +0000 (11:39 +0200)]
drm/amd/display: remove duplicate call to rn_vbios_smu_get_smu_version()
Commit
78fe9f63947a2b ("drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions")
added a call to rn_vbios_smu_get_smu_version() to set clk_mgr->smu_ver.
That field is initialized prior to the if-statement, already.
Fixes:
78fe9f63947a2b (drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions)
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sung Lee <sung.lee@amd.com>
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 28 Sep 2020 18:16:25 +0000 (14:16 -0400)]
drm/amdgpu/swsmu/smu12: fix force clock handling for mclk
The state array is in the reverse order compared to other asics
(high to low rather than low to high).
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1313
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jean Delvare [Mon, 28 Sep 2020 09:10:37 +0000 (11:10 +0200)]
drm/amdgpu: restore proper ref count in amdgpu_display_crtc_set_config
A recent attempt to fix a ref count leak in
amdgpu_display_crtc_set_config() turned out to be doing too much and
"fixed" an intended decrease as if it were a leak. Undo that part to
restore the proper balance. This is the very nature of this function
to increase or decrease the power reference count depending on the
situation.
Consequences of this bug is that the power reference would
eventually get down to 0 while the display was still in use,
resulting in that display switching off unexpectedly.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes:
e008fa6fb415 ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config")
Cc: stable@vger.kernel.org
Cc: Navid Emamdoost <navid.emamdoost@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 22 Sep 2020 15:34:16 +0000 (11:34 -0400)]
drm/amdgpu/display: fix CFLAGS setup for DCN30
Properly handle clang and older versions of gcc.
Fixes:
e77165bf7b02a3 ("drm/amd/display: Add DCN3 blocks to Makefile")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Flora Cui [Wed, 23 Sep 2020 06:42:59 +0000 (14:42 +0800)]
drm/amd/display: fix return value check for hdcp_work
max_caps might be 0, thus hdcp_work might be ZERO_SIZE_PTR
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jiansong Chen [Wed, 23 Sep 2020 03:58:23 +0000 (11:58 +0800)]
drm/amdgpu: remove gpu_info fw support for sienna_cichlid etc.
Remove gpu_info fw support for sienna_cichlid etc., since the
information can be retrieved from discovery binary.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sudheesh Mavila [Tue, 15 Sep 2020 07:18:20 +0000 (12:48 +0530)]
drm/amd/pm: Removed fixed clock in auto mode DPM
SMU10_UMD_PSTATE_PEAK_FCLK value should not be used to set the DPM.
Suggested-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Uwe Kleine-König [Sat, 19 Sep 2020 14:39:22 +0000 (16:39 +0200)]
scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting
When building with
$ HOST_EXTRACFLAGS=-g make
the expectation is that host tools are built with debug informations.
This however doesn't happen if the Makefile assigns a new value to the
HOST_EXTRACFLAGS instead of appending to it. So use += instead of := for
the first assignment.
Fixes:
e3fd9b5384f3 ("scripts/dtc: consolidate include path options in Makefile")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Rob Herring [Mon, 28 Sep 2020 15:22:56 +0000 (10:22 -0500)]
dt-bindings: Fix 'reg' size issues in zynqmp examples
The default sizes in examples for 'reg' are 1 cell each. Fix the
incorrect sizes in zynqmp examples:
Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.example.dt.yaml: example-0: dma-controller@
fd4c0000:reg:0: [0,
4249616384, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@
fd4a0000:reg:0: [0,
4249485312, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@
fd4a0000:reg:1: [0,
4249526272, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@
fd4a0000:reg:2: [0,
4249530368, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@
fd4a0000:reg:3: [0,
4249534464, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Cc: Hyun Kwon <hyun.kwon@xilinx.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: dmaengine@vger.kernel.org
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Linus Torvalds [Tue, 29 Sep 2020 17:35:42 +0000 (10:35 -0700)]
Merge tag 'dmaengine-fix-5.9' of git://git./linux/kernel/git/vkoul/dmaengine
Pull dmaengine fix from Vinod Koul:
"Fix dmatest for misconfigured channel"
* tag 'dmaengine-fix-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: dmatest: Prevent to run on misconfigured channel
Linus Torvalds [Tue, 29 Sep 2020 17:33:06 +0000 (10:33 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"A couple of last minute fixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: fix backend feature ioctls
vhost: Fix documentation
Steven Rostedt (VMware) [Tue, 29 Sep 2020 16:40:31 +0000 (12:40 -0400)]
ftrace: Move RCU is watching check after recursion check
The first thing that the ftrace function callback helper functions should do
is to check for recursion. Peter Zijlstra found that when
"rcu_is_watching()" had its notrace removed, it caused perf function tracing
to crash. This is because the call of rcu_is_watching() is tested before
function recursion is checked and and if it is traced, it will cause an
infinite recursion loop.
rcu_is_watching() should still stay notrace, but to prevent this should
never had crashed in the first place. The recursion prevention must be the
first thing done in callback functions.
Link: https://lore.kernel.org/r/20200929112541.GM2628@hirez.programming.kicks-ass.net
Cc: stable@vger.kernel.org
Cc: Paul McKenney <paulmck@kernel.org>
Fixes:
c68c0fa293417 ("ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Steven Rostedt (VMware) [Tue, 29 Sep 2020 16:27:23 +0000 (12:27 -0400)]
tracing: Fix trace_find_next_entry() accounting of temp buffer size
The temp buffer size variable for trace_find_next_entry() was incorrectly
being updated when the size did not change. The temp buffer size should only
be updated when it is reallocated.
This is mostly an issue when used with ftrace_dump(). That's because
ftrace_dump() can not allocate a new buffer, and instead uses a temporary
buffer with a fix size. But the variable that keeps track of that size is
incorrectly updated with each call, and it could fall into the path that
would try to reallocate the buffer and produce a warning.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1601 at kernel/trace/trace.c:3548
trace_find_next_entry+0xd0/0xe0
Modules linked in [..]
CPU: 1 PID: 1601 Comm: bash Not tainted 5.9.0-rc5-test+ #521
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03
07/14/2016
RIP: 0010:trace_find_next_entry+0xd0/0xe0
Code: 40 21 00 00 4c 89 e1 31 d2 4c 89 ee 48 89 df e8 c6 9e ff ff 89 ab 54
21 00 00 5b 5d 41 5c 41 5d c3 48 63 d5 eb bf 31 c0 eb f0 <0f> 0b 48 63 d5 eb
b4 66 0f 1f 84 00 00 00 00 00 53 48 8d 8f 60 21
RSP: 0018:
ffff95a4f2e8bd70 EFLAGS:
00010046
RAX:
ffffffff96679fc0 RBX:
ffffffff97910de0 RCX:
ffffffff96679fc0
RDX:
ffff95a4f2e8bd98 RSI:
ffff95a4ee321098 RDI:
ffffffff97913000
RBP:
0000000000000018 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000001 R11:
0000000000000046 R12:
ffff95a4f2e8bd98
R13:
0000000000000000 R14:
ffff95a4ee321098 R15:
00000000009aa301
FS:
00007f8565484740(0000) GS:
ffff95a55aa40000(0000)
knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000055876bd43d90 CR3:
00000000b76e6003 CR4:
00000000001706e0
Call Trace:
trace_print_lat_context+0x58/0x2d0
? cpumask_next+0x16/0x20
print_trace_line+0x1a4/0x4f0
ftrace_dump.cold+0xad/0x12c
__handle_sysrq.cold+0x51/0x126
write_sysrq_trigger+0x3f/0x4a
proc_reg_write+0x53/0x80
vfs_write+0xca/0x210
ksys_write+0x70/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f8565579487
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa
64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff
77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:
00007ffd40707948 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
RAX:
ffffffffffffffda RBX:
0000000000000002 RCX:
00007f8565579487
RDX:
0000000000000002 RSI:
000055876bd74de0 RDI:
0000000000000001
RBP:
000055876bd74de0 R08:
000000000000000a R09:
0000000000000001
R10:
000055876bdec280 R11:
0000000000000246 R12:
0000000000000002
R13:
00007f856564a500 R14:
0000000000000002 R15:
00007f856564a700
irq event stamp: 109958
---[ end trace
7aab5b7e51484b00 ]---
Not only fix the updating of the temp buffer, but also do not free the temp
buffer before a new buffer is allocated (there's no reason to not continue
to use the current temp buffer if an allocation fails).
Cc: stable@vger.kernel.org
Fixes:
8e99cf91b99bb ("tracing: Do not allocate buffer in trace_find_next_entry() in atomic")
Reported-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Linus Torvalds [Mon, 28 Sep 2020 18:05:56 +0000 (11:05 -0700)]
Merge tag 'nfs-for-5.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- NFSv4.2: copy_file_range needs to invalidate caches on success
- NFSv4.2: Fix security label length not being reset
- pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly
on read
- pNFS/flexfiles: Fix signed/unsigned type issues with mirror
indices"
* tag 'nfs-for-5.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
pNFS/flexfiles: Be consistent about mirror index types
pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly on read
NFSv4.2: fix client's attribute cache management for copy_file_range
nfs: Fix security label length not being reset
Jason A. Donenfeld [Mon, 28 Sep 2020 10:35:07 +0000 (12:35 +0200)]
mm: do not rely on mm == current->mm in __get_user_pages_locked
It seems likely this block was pasted from internal_get_user_pages_fast,
which is not passed an mm struct and therefore uses current's. But
__get_user_pages_locked is passed an explicit mm, and current->mm is not
always valid. This was hit when being called from i915, which uses:
pin_user_pages_remote->
__get_user_pages_remote->
__gup_longterm_locked->
__get_user_pages_locked
Before, this would lead to an OOPS:
BUG: kernel NULL pointer dereference, address:
0000000000000064
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
CPU: 10 PID: 1431 Comm: kworker/u33:1 Tainted: P S U O 5.9.0-rc7+ #140
Hardware name: LENOVO 20QTCTO1WW/20QTCTO1WW, BIOS N2OET47W (1.34 ) 08/06/2020
Workqueue: i915-userptr-acquire __i915_gem_userptr_get_pages_worker [i915]
RIP: 0010:__get_user_pages_remote+0xd7/0x310
Call Trace:
__i915_gem_userptr_get_pages_worker+0xc8/0x260 [i915]
process_one_work+0x1ca/0x390
worker_thread+0x48/0x3c0
kthread+0x114/0x130
ret_from_fork+0x1f/0x30
CR2:
0000000000000064
This commit fixes the problem by using the mm pointer passed to the
function rather than the bogus one in current.
Fixes:
008cfe4418b3 ("mm: Introduce mm_struct.has_pinned")
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Harald Arnesen <harald@skogtun.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Maxime Ripard [Thu, 24 Sep 2020 08:26:42 +0000 (10:26 +0200)]
ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfd
The current binding for the RPi firmware uses the simple-bus compatible as
a fallback to benefit from its automatic probing of child nodes.
However, simple-bus also comes with some constraints, like having the ranges,
our case.
Let's switch to simple-mfd that provides the same probing logic without
those constraints.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200924082642.18144-1-maxime@cerno.tech
Signed-off-by: Rob Herring <robh@kernel.org>
Linus Torvalds [Sun, 27 Sep 2020 21:38:10 +0000 (14:38 -0700)]
Linux 5.9-rc7
Linus Torvalds [Sun, 27 Sep 2020 19:18:57 +0000 (12:18 -0700)]
Merge tag 'kbuild-fixes-v5.9-4' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- ignore compiler stubs for PPC to fix builds
- fix the usage of --target mentioned in the LLVM document
* tag 'kbuild-fixes-v5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Documentation/llvm: Fix clang target examples
scripts/kallsyms: skip ppc compiler stub *.long_branch.* / *.plt_branch.*
Linus Torvalds [Sun, 27 Sep 2020 19:15:21 +0000 (12:15 -0700)]
Merge tag 'x86-urgent-2020-09-27' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Two fixes for the x86 interrupt code:
- Unbreak the magic 'search the timer interrupt' logic in IO/APIC
code which got wreckaged when the core interrupt code made the
state tracking logic stricter.
That caused the interrupt line to stay masked after switching from
IO/APIC to PIC delivery mode, which obviously prevents interrupts
from being delivered.
- Make run_on_irqstack_code() typesafe. The function argument is a
void pointer which is then cast to 'void (*fun)(void *).
This breaks Control Flow Integrity checking in clang. Use proper
helper functions for the three variants reuqired"
* tag 'x86-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Unbreak check_timer()
x86/irq: Make run_on_irqstack_cond() typesafe
Linus Torvalds [Sun, 27 Sep 2020 19:11:35 +0000 (12:11 -0700)]
Merge tag 'timers-urgent-2020-09-27' of git://git./linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A set of clocksource/clockevents updates:
- Reset the TI/DM timer before enabling it instead of doing it the
other way round.
- Initialize the reload value for the GX6605s timer correctly so the
hardware counter starts at 0 again after overrun.
- Make error return value negative in the h8300 timer init function"
* tag 'timers-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-gx6605s: Fixup counter reload
clocksource/drivers/timer-ti-dm: Do reset before enable
clocksource/drivers/h8300_timer8: Fix wrong return value in h8300_8timer_init()
Peter Xu [Fri, 25 Sep 2020 22:26:00 +0000 (18:26 -0400)]
mm/thp: Split huge pmds/puds if they're pinned when fork()
Pinned pages shouldn't be write-protected when fork() happens, because
follow up copy-on-write on these pages could cause the pinned pages to
be replaced by random newly allocated pages.
For huge PMDs, we split the huge pmd if pinning is detected. So that
future handling will be done by the PTE level (with our latest changes,
each of the small pages will be copied). We can achieve this by let
copy_huge_pmd() return -EAGAIN for pinned pages, so that we'll
fallthrough in copy_pmd_range() and finally land the next
copy_pte_range() call.
Huge PUDs will be even more special - so far it does not support
anonymous pages. But it can actually be done the same as the huge PMDs
even if the split huge PUDs means to erase the PUD entries. It'll
guarantee the follow up fault ins will remap the same pages in either
parent/child later.
This might not be the most efficient way, but it should be easy and
clean enough. It should be fine, since we're tackling with a very rare
case just to make sure userspaces that pinned some thps will still work
even without MADV_DONTFORK and after they fork()ed.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Xu [Fri, 25 Sep 2020 22:25:59 +0000 (18:25 -0400)]
mm: Do early cow for pinned pages during fork() for ptes
This allows copy_pte_range() to do early cow if the pages were pinned on
the source mm.
Currently we don't have an accurate way to know whether a page is pinned
or not. The only thing we have is page_maybe_dma_pinned(). However
that's good enough for now. Especially, with the newly added
mm->has_pinned flag to make sure we won't affect processes that never
pinned any pages.
It would be easier if we can do GFP_KERNEL allocation within
copy_one_pte(). Unluckily, we can't because we're with the page table
locks held for both the parent and child processes. So the page
allocation needs to be done outside copy_one_pte().
Some trick is there in copy_present_pte(), majorly the wrprotect trick
to block concurrent fast-gup. Comments in the function should explain
better in place.
Oleg Nesterov reported a (probably harmless) bug during review that we
didn't reset entry.val properly in copy_pte_range() so that potentially
there's chance to call add_swap_count_continuation() multiple times on
the same swp entry. However that should be harmless since even if it
happens, the same function (add_swap_count_continuation()) will return
directly noticing that there're enough space for the swp counter. So
instead of a standalone stable patch, it is touched up in this patch
directly.
Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Xu [Fri, 25 Sep 2020 22:25:58 +0000 (18:25 -0400)]
mm/fork: Pass new vma pointer into copy_page_range()
This prepares for the future work to trigger early cow on pinned pages
during fork().
No functional change intended.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Xu [Fri, 25 Sep 2020 22:25:57 +0000 (18:25 -0400)]
mm: Introduce mm_struct.has_pinned
(Commit message majorly collected from Jason Gunthorpe)
Reduce the chance of false positive from page_maybe_dma_pinned() by
keeping track if the mm_struct has ever been used with pin_user_pages().
This allows cases that might drive up the page ref_count to avoid any
penalty from handling dma_pinned pages.
Future work is planned, to provide a more sophisticated solution, likely
to turn it into a real counter. For now, make it atomic_t but use it as
a boolean for simplicity.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Gleixner [Sun, 27 Sep 2020 09:24:34 +0000 (11:24 +0200)]
Merge tag 'timers-v5.9-rc4' of https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent
Pull clocksource/clockevent fixes from Daniel Lezcano:
- Fix wrong signed return value when checking of_iomap in the probe
function for the h8300 timer (Tianjia Zhang)
- Fix reset sequence when setting up the timer on the dm_timer (Tony
Lindgren)
- Fix counter reload when the interrupt fires on gx6605s (Guo Ren)
Linus Torvalds [Sat, 26 Sep 2020 18:18:37 +0000 (11:18 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes: one in drivers (lpfc) and two for zoned block devices.
The latter also impinges on the block layer but only to introduce a
new block API for setting the zone model rather than fiddling with the
queue directly in the zoned block driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: sd_zbc: Fix ZBC disk initialization
scsi: sd: sd_zbc: Fix handling of host-aware ZBC disks
scsi: lpfc: Fix initial FLOGI failure due to BBSCN not supported
Linus Torvalds [Sat, 26 Sep 2020 18:13:51 +0000 (11:13 -0700)]
Merge tag 'io_uring-5.9-2020-09-25' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two fixes for regressions in this cycle, and one that goes to 5.8
stable:
- fix leak of getname() retrieved filename
- remove plug->nowait assignment, fixing a regression with btrfs
- fix for async buffered retry"
* tag 'io_uring-5.9-2020-09-25' of git://git.kernel.dk/linux-block:
io_uring: ensure async buffered read-retry is setup properly
io_uring: don't unconditionally set plug->nowait = true
io_uring: ensure open/openat2 name is cleaned on cancelation
Linus Torvalds [Sat, 26 Sep 2020 18:07:36 +0000 (11:07 -0700)]
Merge tag 'block-5.9-2020-09-25' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"NVMe pull request from Christoph, and removal of a dead define.
- fix error during controller probe that cause double free irqs
(Keith Busch)
- FC connection establishment fix (James Smart)
- properly handle completions for invalid tags (Xianting Tian)
- pass the correct nsid to the command effects and supported log
(Chaitanya Kulkarni)"
* tag 'block-5.9-2020-09-25' of git://git.kernel.dk/linux-block:
block: remove unused BLK_QC_T_EAGAIN flag
nvme-core: don't use NVME_NSID_ALL for command effects and supported log
nvme-fc: fail new connections to a deleted host or remote port
nvme-pci: fix NULL req in completion handler
nvme: return errors for hwmon init
Linus Torvalds [Sat, 26 Sep 2020 18:01:18 +0000 (11:01 -0700)]
Merge tag 's390-5.9-7' of git://git./linux/kernel/git/s390/linux
Pull s390 fix from Vasily Gorbik:
"Fix truncated ZCRYPT_PERDEV_REQCNT ioctl result. Copy entire reqcnt
list"
* tag 's390-5.9-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Fix ZCRYPT_PERDEV_REQCNT ioctl
Linus Torvalds [Sat, 26 Sep 2020 17:53:35 +0000 (10:53 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"9 patches.
Subsystems affected by this patch series: mm (thp, memcg, gup,
migration, memory-hotplug), lib, and x86"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: don't rely on system state to detect hot-plug operations
mm: replace memmap_context by meminit_context
arch/x86/lib/usercopy_64.c: fix __copy_user_flushcache() cache writeback
lib/memregion.c: include memregion.h
lib/string.c: implement stpcpy
mm/migrate: correct thp migration stats
mm/gup: fix gup_fast with dynamic page table folding
mm: memcontrol: fix missing suffix of workingset_restore
mm, THP, swap: fix allocating cluster for swapfile by mistake
Minchan Kim [Tue, 15 Sep 2020 06:32:15 +0000 (23:32 -0700)]
mm: validate pmd after splitting
syzbot reported the following KASAN splat:
general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 1 PID: 6826 Comm: syz-executor142 Not tainted 5.9.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__lock_acquire+0x84/0x2ae0 kernel/locking/lockdep.c:4296
Code: ff df 8a 04 30 84 c0 0f 85 e3 16 00 00 83 3d 56 58 35 08 00 0f 84 0e 17 00 00 83 3d 25 c7 f5 07 00 74 2c 4c 89 e8 48 c1 e8 03 <80> 3c 30 00 74 12 4c 89 ef e8 3e d1 5a 00 48 be 00 00 00 00 00 fc
RSP: 0018:
ffffc90004b9f850 EFLAGS:
00010006
Call Trace:
lock_acquire+0x140/0x6f0 kernel/locking/lockdep.c:5006
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:151
spin_lock include/linux/spinlock.h:354 [inline]
madvise_cold_or_pageout_pte_range+0x52f/0x25c0 mm/madvise.c:389
walk_pmd_range mm/pagewalk.c:89 [inline]
walk_pud_range mm/pagewalk.c:160 [inline]
walk_p4d_range mm/pagewalk.c:193 [inline]
walk_pgd_range mm/pagewalk.c:229 [inline]
__walk_page_range+0xe7b/0x1da0 mm/pagewalk.c:331
walk_page_range+0x2c3/0x5c0 mm/pagewalk.c:427
madvise_pageout_page_range mm/madvise.c:521 [inline]
madvise_pageout mm/madvise.c:557 [inline]
madvise_vma mm/madvise.c:946 [inline]
do_madvise+0x12d0/0x2090 mm/madvise.c:1145
__do_sys_madvise mm/madvise.c:1171 [inline]
__se_sys_madvise mm/madvise.c:1169 [inline]
__x64_sys_madvise+0x76/0x80 mm/madvise.c:1169
do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The backing vma was shmem.
In case of split page of file-backed THP, madvise zaps the pmd instead
of remapping of sub-pages. So we need to check pmd validity after
split.
Reported-by: syzbot+ecf80462cb7d5d552bc7@syzkaller.appspotmail.com
Fixes:
1a4e58cce84e ("mm: introduce MADV_PAGEOUT")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Laurent Dufour [Sat, 26 Sep 2020 04:19:31 +0000 (21:19 -0700)]
mm: don't rely on system state to detect hot-plug operations
In register_mem_sect_under_node() the system_state's value is checked to
detect whether the call is made during boot time or during an hot-plug
operation. Unfortunately, that check against SYSTEM_BOOTING is wrong
because regular memory is registered at SYSTEM_SCHEDULING state. In
addition, memory hot-plug operation can be triggered at this system
state by the ACPI [1]. So checking against the system state is not
enough.
The consequence is that on system with interleaved node's ranges like this:
Early memory node ranges
node 1: [mem 0x0000000000000000-0x000000011fffffff]
node 2: [mem 0x0000000120000000-0x000000014fffffff]
node 1: [mem 0x0000000150000000-0x00000001ffffffff]
node 0: [mem 0x0000000200000000-0x000000048fffffff]
node 2: [mem 0x0000000490000000-0x00000007ffffffff]
This can be seen on PowerPC LPAR after multiple memory hot-plug and
hot-unplug operations are done. At the next reboot the node's memory
ranges can be interleaved and since the call to link_mem_sections() is
made in topology_init() while the system is in the SYSTEM_SCHEDULING
state, the node's id is not checked, and the sections registered to
multiple nodes:
$ ls -l /sys/devices/system/memory/memory21/node*
total 0
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2
In that case, the system is able to boot but if later one of theses
memory blocks is hot-unplugged and then hot-plugged, the sysfs
inconsistency is detected and this is triggering a BUG_ON():
kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4
CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25
Call Trace:
add_memory_resource+0x23c/0x340 (unreliable)
__add_memory+0x5c/0xf0
dlpar_add_lmb+0x1b4/0x500
dlpar_memory+0x1f8/0xb80
handle_dlpar_errorlog+0xc0/0x190
dlpar_store+0x198/0x4a0
kobj_attr_store+0x30/0x50
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
vfs_write+0xe8/0x290
ksys_write+0xdc/0x130
system_call_exception+0x160/0x270
system_call_common+0xf0/0x27c
This patch addresses the root cause by not relying on the system_state
value to detect whether the call is due to a hot-plug operation. An
extra parameter is added to link_mem_sections() detailing whether the
operation is due to a hot-plug operation.
[1] According to Oscar Salvador, using this qemu command line, ACPI
memory hotplug operations are raised at SYSTEM_SCHEDULING state:
$QEMU -enable-kvm -machine pc -smp 4,sockets=4,cores=1,threads=1 -cpu host -monitor pty \
-m size=$MEM,slots=255,maxmem=4294967296k \
-numa node,nodeid=0,cpus=0-3,mem=512 -numa node,nodeid=1,mem=512 \
-object memory-backend-ram,id=memdimm0,size=
134217728 -device pc-dimm,node=0,memdev=memdimm0,id=dimm0,slot=0 \
-object memory-backend-ram,id=memdimm1,size=
134217728 -device pc-dimm,node=0,memdev=memdimm1,id=dimm1,slot=1 \
-object memory-backend-ram,id=memdimm2,size=
134217728 -device pc-dimm,node=0,memdev=memdimm2,id=dimm2,slot=2 \
-object memory-backend-ram,id=memdimm3,size=
134217728 -device pc-dimm,node=0,memdev=memdimm3,id=dimm3,slot=3 \
-object memory-backend-ram,id=memdimm4,size=
134217728 -device pc-dimm,node=1,memdev=memdimm4,id=dimm4,slot=4 \
-object memory-backend-ram,id=memdimm5,size=
134217728 -device pc-dimm,node=1,memdev=memdimm5,id=dimm5,slot=5 \
-object memory-backend-ram,id=memdimm6,size=
134217728 -device pc-dimm,node=1,memdev=memdimm6,id=dimm6,slot=6 \
Fixes:
4fbce633910e ("mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of walk_memory_range()")
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200915094143.79181-3-ldufour@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Laurent Dufour [Sat, 26 Sep 2020 04:19:28 +0000 (21:19 -0700)]
mm: replace memmap_context by meminit_context
Patch series "mm: fix memory to node bad links in sysfs", v3.
Sometimes, firmware may expose interleaved memory layout like this:
Early memory node ranges
node 1: [mem 0x0000000000000000-0x000000011fffffff]
node 2: [mem 0x0000000120000000-0x000000014fffffff]
node 1: [mem 0x0000000150000000-0x00000001ffffffff]
node 0: [mem 0x0000000200000000-0x000000048fffffff]
node 2: [mem 0x0000000490000000-0x00000007ffffffff]
In that case, we can see memory blocks assigned to multiple nodes in
sysfs:
$ ls -l /sys/devices/system/memory/memory21
total 0
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2
-rw-r--r-- 1 root root 65536 Aug 24 05:27 online
-r--r--r-- 1 root root 65536 Aug 24 05:27 phys_device
-r--r--r-- 1 root root 65536 Aug 24 05:27 phys_index
drwxr-xr-x 2 root root 0 Aug 24 05:27 power
-r--r--r-- 1 root root 65536 Aug 24 05:27 removable
-rw-r--r-- 1 root root 65536 Aug 24 05:27 state
lrwxrwxrwx 1 root root 0 Aug 24 05:25 subsystem -> ../../../../bus/memory
-rw-r--r-- 1 root root 65536 Aug 24 05:25 uevent
-r--r--r-- 1 root root 65536 Aug 24 05:27 valid_zones
The same applies in the node's directory with a memory21 link in both
the node1 and node2's directory.
This is wrong but doesn't prevent the system to run. However when
later, one of these memory blocks is hot-unplugged and then hot-plugged,
the system is detecting an inconsistency in the sysfs layout and a
BUG_ON() is raised:
kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084!
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4
CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25
Call Trace:
add_memory_resource+0x23c/0x340 (unreliable)
__add_memory+0x5c/0xf0
dlpar_add_lmb+0x1b4/0x500
dlpar_memory+0x1f8/0xb80
handle_dlpar_errorlog+0xc0/0x190
dlpar_store+0x198/0x4a0
kobj_attr_store+0x30/0x50
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
vfs_write+0xe8/0x290
ksys_write+0xdc/0x130
system_call_exception+0x160/0x270
system_call_common+0xf0/0x27c
This has been seen on PowerPC LPAR.
The root cause of this issue is that when node's memory is registered,
the range used can overlap another node's range, thus the memory block
is registered to multiple nodes in sysfs.
There are two issues here:
(a) The sysfs memory and node's layouts are broken due to these
multiple links
(b) The link errors in link_mem_sections() should not lead to a system
panic.
To address (a) register_mem_sect_under_node should not rely on the
system state to detect whether the link operation is triggered by a hot
plug operation or not. This is addressed by the patches 1 and 2 of this
series.
Issue (b) will be addressed separately.
This patch (of 2):
The memmap_context enum is used to detect whether a memory operation is
due to a hot-add operation or happening at boot time.
Make it general to the hotplug operation and rename it as
meminit_context.
There is no functional change introduced by this patch
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J . Wysocki" <rafael@kernel.org>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200915094143.79181-1-ldufour@linux.ibm.com
Link: https://lkml.kernel.org/r/20200915132624.9723-1-ldufour@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mikulas Patocka [Sat, 26 Sep 2020 04:19:24 +0000 (21:19 -0700)]
arch/x86/lib/usercopy_64.c: fix __copy_user_flushcache() cache writeback
If we copy less than 8 bytes and if the destination crosses a cache
line, __copy_user_flushcache would invalidate only the first cache line.
This patch makes it invalidate the second cache line as well.
Fixes:
0aed55af88345b ("x86, uaccess: introduce copy_from_iter_flushcache for pmem / cache-bypass operations")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.wiilliams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/alpine.LRH.2.02.2009161451140.21915@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason Yan [Sat, 26 Sep 2020 04:19:21 +0000 (21:19 -0700)]
lib/memregion.c: include memregion.h
This addresses the following sparse warning:
lib/memregion.c:8:5: warning: symbol 'memregion_alloc' was not declared. Should it be static?
lib/memregion.c:14:6: warning: symbol 'memregion_free' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200921142852.875312-1-yanaijie@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Desaulniers [Sat, 26 Sep 2020 04:19:18 +0000 (21:19 -0700)]
lib/string.c: implement stpcpy
LLVM implemented a recent "libcall optimization" that lowers calls to
`sprintf(dest, "%s", str)` where the return value is used to
`stpcpy(dest, str) - dest`.
This generally avoids the machinery involved in parsing format strings.
`stpcpy` is just like `strcpy` except it returns the pointer to the new
tail of `dest`. This optimization was introduced into clang-12.
Implement this so that we don't observe linkage failures due to missing
symbol definitions for `stpcpy`.
Similar to last year's fire drill with: commit
5f074f3e192f
("lib/string.c: implement a basic bcmp")
The kernel is somewhere between a "freestanding" environment (no full
libc) and "hosted" environment (many symbols from libc exist with the
same type, function signature, and semantics).
As Peter Anvin notes, there's not really a great way to inform the
compiler that you're targeting a freestanding environment but would like
to opt-in to some libcall optimizations (see pr/47280 below), rather
than opt-out.
Arvind notes, -fno-builtin-* behaves slightly differently between GCC
and Clang, and Clang is missing many __builtin_* definitions, which I
consider a bug in Clang and am working on fixing.
Masahiro summarizes the subtle distinction between compilers justly:
To prevent transformation from foo() into bar(), there are two ways in
Clang to do that; -fno-builtin-foo, and -fno-builtin-bar. There is
only one in GCC; -fno-buitin-foo.
(Any difference in that behavior in Clang is likely a bug from a missing
__builtin_* definition.)
Masahiro also notes:
We want to disable optimization from foo() to bar(),
but we may still benefit from the optimization from
foo() into something else. If GCC implements the same transform, we
would run into a problem because it is not -fno-builtin-bar, but
-fno-builtin-foo that disables that optimization.
In this regard, -fno-builtin-foo would be more future-proof than
-fno-built-bar, but -fno-builtin-foo is still potentially overkill. We
may want to prevent calls from foo() being optimized into calls to
bar(), but we still may want other optimization on calls to foo().
It seems that compilers today don't quite provide the fine grain control
over which libcall optimizations pseudo-freestanding environments would
prefer.
Finally, Kees notes that this interface is unsafe, so we should not
encourage its use. As such, I've removed the declaration from any
header, but it still needs to be exported to avoid linkage errors in
modules.
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Suggested-by: Andy Lavr <andy.lavr@gmail.com>
Suggested-by: Arvind Sankar <nivedita@alum.mit.edu>
Suggested-by: Joe Perches <joe@perches.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200914161643.938408-1-ndesaulniers@google.com
Link: https://bugs.llvm.org/show_bug.cgi?id=47162
Link: https://bugs.llvm.org/show_bug.cgi?id=47280
Link: https://github.com/ClangBuiltLinux/linux/issues/1126
Link: https://man7.org/linux/man-pages/man3/stpcpy.3.html
Link: https://pubs.opengroup.org/onlinepubs/9699919799/functions/stpcpy.html
Link: https://reviews.llvm.org/D85963
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zi Yan [Sat, 26 Sep 2020 04:19:14 +0000 (21:19 -0700)]
mm/migrate: correct thp migration stats
PageTransHuge returns true for both thp and hugetlb, so thp stats was
counting both thp and hugetlb migrations. Exclude hugetlb migration by
setting is_thp variable right.
Clean up thp handling code too when we are there.
Fixes:
1a5bae25e3cf ("mm/vmstat: add events for THP migration without split")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lkml.kernel.org/r/20200917210413.1462975-1-zi.yan@sent.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vasily Gorbik [Sat, 26 Sep 2020 04:19:10 +0000 (21:19 -0700)]
mm/gup: fix gup_fast with dynamic page table folding
Currently to make sure that every page table entry is read just once
gup_fast walks perform READ_ONCE and pass pXd value down to the next
gup_pXd_range function by value e.g.:
static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
unsigned int flags, struct page **pages, int *nr)
...
pudp = pud_offset(&p4d, addr);
This function passes a reference on that local value copy to pXd_offset,
and might get the very same pointer in return. This happens when the
level is folded (on most arches), and that pointer should not be
iterated.
On s390 due to the fact that each task might have different 5,4 or
3-level address translation and hence different levels folded the logic
is more complex and non-iteratable pointer to a local copy leads to
severe problems.
Here is an example of what happens with gup_fast on s390, for a task
with 3-level paging, crossing a 2 GB pud boundary:
// addr = 0x1007ffff000, end = 0x10080001000
static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
unsigned int flags, struct page **pages, int *nr)
{
unsigned long next;
pud_t *pudp;
// pud_offset returns &p4d itself (a pointer to a value on stack)
pudp = pud_offset(&p4d, addr);
do {
// on second iteratation reading "random" stack value
pud_t pud = READ_ONCE(*pudp);
// next = 0x10080000000, due to PUD_SIZE/MASK != PGDIR_SIZE/MASK on s390
next = pud_addr_end(addr, end);
...
} while (pudp++, addr = next, addr != end); // pudp++ iterating over stack
return 1;
}
This happens since s390 moved to common gup code with commit
d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") and
commit
1a42010cdc26 ("s390/mm: convert to the generic
get_user_pages_fast code").
s390 tried to mimic static level folding by changing pXd_offset
primitives to always calculate top level page table offset in pgd_offset
and just return the value passed when pXd_offset has to act as folded.
What is crucial for gup_fast and what has been overlooked is that
PxD_SIZE/MASK and thus pXd_addr_end should also change correspondingly.
And the latter is not possible with dynamic folding.
To fix the issue in addition to pXd values pass original pXdp pointers
down to gup_pXd_range functions. And introduce pXd_offset_lockless
helpers, which take an additional pXd entry value parameter. This has
already been discussed in
https://lkml.kernel.org/r/
20190418100218.
0a4afd51@mschwideX1
Fixes:
1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: <stable@vger.kernel.org> [5.2+]
Link: https://lkml.kernel.org/r/patch.git-943f1e5dcff2.your-ad-here.call-01599856292-ext-8676@work.hours
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Muchun Song [Sat, 26 Sep 2020 04:19:05 +0000 (21:19 -0700)]
mm: memcontrol: fix missing suffix of workingset_restore
We forget to add the suffix to the workingset_restore string, so fix it.
And also update the documentation of cgroup-v2.rst.
Fixes:
170b04b7ae49 ("mm/workingset: prepare the workingset detection infrastructure for anon LRU")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/20200916100030.71698-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gao Xiang [Sat, 26 Sep 2020 04:19:01 +0000 (21:19 -0700)]
mm, THP, swap: fix allocating cluster for swapfile by mistake
SWP_FS is used to make swap_{read,write}page() go through the
filesystem, and it's only used for swap files over NFS. So, !SWP_FS
means non NFS for now, it could be either file backed or device backed.
Something similar goes with legacy SWP_FILE.
So in order to achieve the goal of the original patch, SWP_BLKDEV should
be used instead.
FS corruption can be observed with SSD device + XFS + fragmented
swapfile due to CONFIG_THP_SWAP=y.
I reproduced the issue with the following details:
Environment:
QEMU + upstream kernel + buildroot + NVMe (2 GB)
Kernel config:
CONFIG_BLK_DEV_NVME=y
CONFIG_THP_SWAP=y
Some reproducible steps:
mkfs.xfs -f /dev/nvme0n1
mkdir /tmp/mnt
mount /dev/nvme0n1 /tmp/mnt
bs="32k"
sz="1024m" # doesn't matter too much, I also tried 16m
xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw
xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw
xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw
xfs_io -f -c "pwrite -F -S 0 -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw
xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fsync" /tmp/mnt/sw
mkswap /tmp/mnt/sw
swapon /tmp/mnt/sw
stress --vm 2 --vm-bytes 600M # doesn't matter too much as well
Symptoms:
- FS corruption (e.g. checksum failure)
- memory corruption at: 0xd2808010
- segfault
Fixes:
f0eea189e8e9 ("mm, THP, swap: Don't allocate huge cluster for file backed swap device")
Fixes:
38d8b4e6bdc8 ("mm, THP, swap: delay splitting THP during swap out")
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Eric Sandeen <esandeen@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200820045323.7809-1-hsiangkao@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shakeel Butt [Sat, 26 Sep 2020 14:13:41 +0000 (07:13 -0700)]
mm: slab: fix potential double free in ___cache_free
With the commit
10befea91b61 ("mm: memcg/slab: use a single set of
kmem_caches for all allocations"), it becomes possible to call kfree()
from the slabs_destroy().
The functions cache_flusharray() and do_drain() calls slabs_destroy() on
array_cache of the local CPU without updating the size of the
array_cache. This enables the kfree() call from the slabs_destroy() to
recursively call cache_flusharray() which can potentially call
free_block() on the same elements of the array_cache of the local CPU
and causing double free and memory corruption.
To fix the issue, simply update the local CPU array_cache cache before
calling slabs_destroy().
Fixes:
10befea91b61 ("mm: memcg/slab: use a single set of kmem_caches for all allocations")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ted Ts'o <tytso@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Florian Fainelli [Fri, 25 Sep 2020 15:21:14 +0000 (08:21 -0700)]
Documentation/llvm: Fix clang target examples
clang --target=<triple> is how we can specify a particular toolchain
triple to be use, fix the two occurences in the documentation.
Fixes:
fcf1b6a35c16 ("Documentation/llvm: add documentation on building w/ Clang/LLVM")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Linus Torvalds [Sat, 26 Sep 2020 00:15:19 +0000 (17:15 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull more kvm fixes from Paolo Bonzini:
"Five small fixes.
The nested migration bug will be fixed with a better API in 5.10 or
5.11, for now this is a fix that works with existing userspace but
keeps the current ugly API"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Add a dedicated INVD intercept routine
KVM: x86: Reset MMU context if guest toggles CR4.SMAP or CR4.PKE
KVM: x86: fix MSR_IA32_TSC read for nested migration
selftests: kvm: Fix assert failure in single-step test
KVM: x86: VMX: Make smaller physical guest address space support user-configurable
Linus Torvalds [Fri, 25 Sep 2020 22:24:04 +0000 (15:24 -0700)]
Merge tag 'mips_fixes_5.9_3' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fixed FP register access on Loongsoon-3
- added missing 1074 cpu handling
- fixed Loongson2ef build error
* tag 'mips_fixes_5.9_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: BCM47XX: Remove the needless check with the 1074K
MIPS: Add the missing 'CPU_1074K' into __get_cpu_type()
MIPS: Loongson2ef: Disable Loongson MMI instructions
MIPS: Loongson-3: Fix fp register access if MSA enabled
Linus Torvalds [Fri, 25 Sep 2020 22:21:54 +0000 (15:21 -0700)]
Merge tag 'spi-fix-v5.9-rc6' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of driver specific fixes, the fsl-espi and bcm-qspi
changes in particular have been causing breakage for users"
* tag 'spi-fix-v5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: bcm-qspi: Fix probe regression on iProc platforms
spi: fsl-dspi: fix use-after-free in remove path
spi: fsl-espi: Only process interrupts for expected events
spi: bcm2835: Make polling_limit_us static
spi: spi-fsl-dspi: use XSPI mode instead of DMA for DPAA2 SoCs
Linus Torvalds [Fri, 25 Sep 2020 22:16:01 +0000 (15:16 -0700)]
Merge tag 'regulator-fix-v5.9-rc6' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A single fix for incorrect specification of some of the register
fields on axp20x devices which would break voltage setting on affected
systems"
* tag 'regulator-fix-v5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: axp20x: fix LDO2/4 description
Linus Torvalds [Fri, 25 Sep 2020 22:11:24 +0000 (15:11 -0700)]
Merge tag 'regmap-fix-v5.9-rc6' of git://git./linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"Two issues here - one is a fix for use after free issues in the case
where a regmap overrides its name using something dynamically
generated, the other is that we weren't handling access checks
non-incrementing I/O on registers within paged register regions
correctly resulting in spurious errors.
Both of these are quite rare but serious if they occur"
* tag 'regmap-fix-v5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: fix page selection for noinc writes
regmap: fix page selection for noinc reads
regmap: debugfs: Add back in erroneously removed initialisation of ret
regmap: debugfs: Fix handling of name string for debugfs init delays
Jens Axboe [Fri, 25 Sep 2020 21:23:43 +0000 (15:23 -0600)]
io_uring: ensure async buffered read-retry is setup properly
A previous commit for fixing up short reads botched the async retry
path, so we ended up going to worker threads more often than we should.
Fix this up, so retries work the way they originally were intended to.
Fixes:
227c0c9673d8 ("io_uring: internally retry short reads")
Reported-by: Hao_Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 25 Sep 2020 17:46:11 +0000 (10:46 -0700)]
Merge tag 'nfsd-5.9-2' of git://git.linux-nfs.org/projects/cel/cel-2.6
Pull NFS server fix from Chuck Lever:
"Fix incorrect calculation on platforms that implement
flush_dcache_page()"
* tag 'nfsd-5.9-2' of git://git.linux-nfs.org/projects/cel/cel-2.6:
SUNRPC: Fix svc_flush_dcache()
Linus Torvalds [Fri, 25 Sep 2020 17:39:22 +0000 (10:39 -0700)]
Merge tag 'pm-5.9-rc7' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix more fallout of recent RCU-lockdep changes in CPU idle code
and two devfreq issues.
Specifics:
- Export rcu_idle_{enter,exit} to modules to fix build issues
introduced by recent RCU-lockdep fixes (Borislav Petkov)
- Add missing return statement to a stub function in the ACPI
processor driver to fix a build issue introduced by recent
RCU-lockdep fixes (Rafael Wysocki)
- Fix recently introduced suspicious RCU usage warnings in the PSCI
cpuidle driver and drop stale comments regarding RCU_NONIDLE()
usage from enter_s2idle_proper() (Ulf Hansson)
- Fix error code path in the tegra30 devfreq driver (Dan Carpenter)
- Add missing information to devfreq_summary debugfs (Chanwoo Choi)"
* tag 'pm-5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Fix build for ARCH_APICTIMER_STOPS_ON_C3 unset
PM / devfreq: tegra30: Disable clock on error in probe
PM / devfreq: Add timer type to devfreq_summary debugfs
cpuidle: Drop misleading comments about RCU usage
cpuidle: psci: Fix suspicious RCU usage
rcu/tree: Export rcu_idle_{enter,exit} to modules
Tom Lendacky [Thu, 24 Sep 2020 18:41:57 +0000 (13:41 -0500)]
KVM: SVM: Add a dedicated INVD intercept routine
The INVD instruction intercept performs emulation. Emulation can't be done
on an SEV guest because the guest memory is encrypted.
Provide a dedicated intercept routine for the INVD intercept. And since
the instruction is emulated as a NOP, just skip it instead.
Fixes:
1654efcbc431 ("KVM: SVM: Add KVM_SEV_INIT command")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <
a0b9a19ffa7fef86a3cc700c7ea01cb2731e04e5.
1600972918.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Fri, 25 Sep 2020 16:49:19 +0000 (09:49 -0700)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fix from Jason Gunthorpe:
"One fix for a bug that blktests hits when using rxe: tear down the CQ
pool before waiting for all references to go away"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/core: Fix ordering of CQ pool destruction
Linus Torvalds [Fri, 25 Sep 2020 16:41:57 +0000 (09:41 -0700)]
Merge tag 'drm-fixes-2020-09-25' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Fairly quiet, a couple of i915 fixes, one dma-buf fix, one vc4 and two
sun4i changes
dma-buf:
- Single null pointer deref fix
i915:
- Fix selftest reference to stack data out of scope
- Fix GVT null pointer dereference
vc4:
- fill asoc card owner
sun4i:
- program secondary CSC correctly"
* tag 'drm-fixes-2020-09-25' of git://anongit.freedesktop.org/drm/drm:
drm/i915/selftests: Push the fake iommu device from the stack to data
dmabuf: fix NULL pointer dereference in dma_buf_release()
drm/i915/gvt: Fix port number for BDW on EDID region setup
drm/sun4i: mixer: Extend regmap max_register
drm/sun4i: sun8i-csc: Secondary CSC register correction
drm/vc4/vc4_hdmi: fill ASoC card owner
Rafael J. Wysocki [Fri, 25 Sep 2020 16:33:46 +0000 (18:33 +0200)]
Merge branch 'pm-cpuidle'
* pm-cpuidle:
ACPI: processor: Fix build for ARCH_APICTIMER_STOPS_ON_C3 unset
cpuidle: Drop misleading comments about RCU usage
cpuidle: psci: Fix suspicious RCU usage
rcu/tree: Export rcu_idle_{enter,exit} to modules
Jens Axboe [Fri, 25 Sep 2020 15:01:53 +0000 (09:01 -0600)]
io_uring: don't unconditionally set plug->nowait = true
This causes all the bios to be submitted with REQ_NOWAIT, which can be
problematic on either btrfs or on file systems that otherwise use a mix
of block devices where only some of them support it.
For now, just remove the setting of plug->nowait = true.
Reported-by: Dan Melnic <dmm@fb.com>
Reported-by: Brian Foster <bfoster@redhat.com>
Fixes:
b63534c41e20 ("io_uring: re-issue block requests that failed because of resources")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rafael J. Wysocki [Fri, 25 Sep 2020 14:33:19 +0000 (16:33 +0200)]
Merge tag 'devfreq-fixes-for-5.9-rc7' of git://git./linux/kernel/git/chanwoo/linux
Pull devfreq updates for 5.9-rc7 from Chanwoo Choi:
"1. Update devfreq core
- Add missing timer type to devfreq_summary debugfs node.
2. Fix devfreq device driver
- Fix the exception handling about clock on tegra30-devfreq.c"
* tag 'devfreq-fixes-for-5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: tegra30: Disable clock on error in probe
PM / devfreq: Add timer type to devfreq_summary debugfs
Jeffle Xu [Fri, 25 Sep 2020 06:00:31 +0000 (14:00 +0800)]
block: remove unused BLK_QC_T_EAGAIN flag
commit
7b6620d7db56 ("block: remove REQ_NOWAIT_INLINE") removed the
REQ_NOWAIT_INLINE related code, but the diff wasn't applied to
blk_types.h somehow.
Then commit
2771cefeac49 ("block: remove the REQ_NOWAIT_INLINE flag")
removed the REQ_NOWAIT_INLINE flag while the BLK_QC_T_EAGAIN flag still
remains.
Fixes:
7b6620d7db56 ("block: remove REQ_NOWAIT_INLINE")
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Thu, 24 Sep 2020 20:55:54 +0000 (14:55 -0600)]
io_uring: ensure open/openat2 name is cleaned on cancelation
If we cancel these requests, we'll leak the memory associated with the
filename. Add them to the table of ops that need cleaning, if
REQ_F_NEED_CLEANUP is set.
Cc: stable@vger.kernel.org
Fixes:
e62753e4e292 ("io_uring: call statx directly")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sean Christopherson [Wed, 23 Sep 2020 21:53:52 +0000 (14:53 -0700)]
KVM: x86: Reset MMU context if guest toggles CR4.SMAP or CR4.PKE
Reset the MMU context during kvm_set_cr4() if SMAP or PKE is toggled.
Recent commits to (correctly) not reload PDPTRs when SMAP/PKE are
toggled inadvertantly skipped the MMU context reset due to the mask
of bits that triggers PDPTR loads also being used to trigger MMU context
resets.
Fixes:
427890aff855 ("kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode")
Fixes:
cb957adb4ea4 ("kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode")
Cc: Jim Mattson <jmattson@google.com>
Cc: Peter Shier <pshier@google.com>
Cc: Oliver Upton <oupton@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200923215352.17756-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dave Airlie [Fri, 25 Sep 2020 01:28:36 +0000 (11:28 +1000)]
Merge tag 'drm-misc-fixes-2020-09-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.9:
- Single null pointer deref fix for dma-buf.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4106c21e-f52c-4c05-6cdb-daa743bb8617@linux.intel.com
Dave Airlie [Fri, 25 Sep 2020 01:07:01 +0000 (11:07 +1000)]
Merge tag 'drm-intel-fixes-2020-09-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.9-rc7:
- Fix selftest reference to stack data out of scope
- Fix GVT null pointer dereference
- Backmerge from Linus' master to fix build
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87zh5fpmha.fsf@intel.com
Dave Airlie [Fri, 25 Sep 2020 01:06:18 +0000 (11:06 +1000)]
BackMerge commit '
98477740630f270aecf648f1d6a9dbc6027d4ff1' into drm-fixes
The dax mess had some fallout, and i915 used a later base to fix their CI.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jens Axboe [Thu, 24 Sep 2020 19:42:40 +0000 (13:42 -0600)]
Merge tag 'nvme-5.9-2020-09-24' of git://git.infradead.org/nvme into block-5.9
Pull NVMe fixes from Christoph:
"nvme fixes for 5.9
- fix error during controller probe that cause double free irqs
(Keith Busch)
- FC connection establishment fix (James Smart)
- properly handle completions for invalid tags (Xianting Tian)
- pass the correct nsid to the command effects and supported log
(Chaitanya Kulkarni)"
* tag 'nvme-5.9-2020-09-24' of git://git.infradead.org/nvme:
nvme-core: don't use NVME_NSID_ALL for command effects and supported log
nvme-fc: fail new connections to a deleted host or remote port
nvme-pci: fix NULL req in completion handler
nvme: return errors for hwmon init
Maxim Levitsky [Mon, 21 Sep 2020 10:38:05 +0000 (13:38 +0300)]
KVM: x86: fix MSR_IA32_TSC read for nested migration
MSR reads/writes should always access the L1 state, since the (nested)
hypervisor should intercept all the msrs it wants to adjust, and these
that it doesn't should be read by the guest as if the host had read it.
However IA32_TSC is an exception. Even when not intercepted, guest still
reads the value + TSC offset.
The write however does not take any TSC offset into account.
This is documented in Intel's SDM and seems also to happen on AMD as well.
This creates a problem when userspace wants to read the IA32_TSC value and then
write it. (e.g for migration)
In this case it reads L2 value but write is interpreted as an L1 value.
To fix this make the userspace initiated reads of IA32_TSC return L1 value
as well.
Huge thanks to Dave Gilbert for helping me understand this very confusing
semantic of MSR writes.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20200921103805.9102-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Thu, 24 Sep 2020 16:09:47 +0000 (09:09 -0700)]
Merge tag 'mmc-v5.9-rc4-2' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fix from Ulf Hansson:
"Fix build warning in mmc_spi when CONFIG_HAS_DMA is unset"
* tag 'mmc-v5.9-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mmc_spi: Fix mmc_spi_dma_alloc() return type for !HAS_DMA
Linus Torvalds [Thu, 24 Sep 2020 16:05:04 +0000 (09:05 -0700)]
Merge tag 'media/v5.9-3' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix a regression at the CEC adapter core
- two uAPI patches (one revert) for changes in this development cycle
* tag 'media/v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: dt-bindings: media: imx274: Convert to json-schema
media: media/v4l2: remove V4L2_FLAG_MEMORY_NON_CONSISTENT flag
media: cec-adap.c: don't use flush_scheduled_work()
Linus Torvalds [Thu, 24 Sep 2020 16:00:05 +0000 (09:00 -0700)]
Merge tag 'sound-5.9-rc7' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a handful small device-specific fixes including a couple of
reverts"
* tag 'sound-5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
Revert "ALSA: usb-audio: Disable Lenovo P620 Rear line-in volume control"
Revert "ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRO"
ALSA: usb-audio: Add delay quirk for H570e USB headsets
ALSA: hda/realtek: Enable front panel headset LED on Lenovo ThinkStation P520
ALSA: hda/realtek - Couldn't detect Mic if booting with headset plugged
ALSA: asihpi: fix iounmap in error handler
Masahiro Yamada [Tue, 22 Sep 2020 17:48:56 +0000 (02:48 +0900)]
scripts/kallsyms: skip ppc compiler stub *.long_branch.* / *.plt_branch.*
PowerPC allmodconfig often fails to build as follows:
LD .tmp_vmlinux.kallsyms1
KSYM .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
KSYM .tmp_vmlinux.kallsyms2.o
LD .tmp_vmlinux.kallsyms3
KSYM .tmp_vmlinux.kallsyms3.o
LD vmlinux
SORTTAB vmlinux
SYSMAP System.map
Inconsistent kallsyms data
Try make KALLSYMS_EXTRA_PASS=1 as a workaround
make[2]: *** [../Makefile:1162: vmlinux] Error 1
Setting KALLSYMS_EXTRA_PASS=1 does not help.
This is caused by the compiler inserting stubs such as *.long_branch.*
and *.plt_branch.*
$ powerpc-linux-nm -n .tmp_vmlinux.kallsyms2
[ snip ]
c00000000210c010 t
00000075.plt_branch.da9:19
c00000000210c020 t
00000075.plt_branch.1677:5
c00000000210c030 t
00000075.long_branch.memmove
c00000000210c034 t
00000075.plt_branch.9e0:5
c00000000210c044 t
00000075.plt_branch.free_initrd_mem
...
Actually, the problem mentioned in scripts/link-vmlinux.sh comments;
"In theory it's possible this results in even more stubs, but unlikely"
is happening here, and ends up with another kallsyms step required.
scripts/kallsyms.c already ignores various compiler stubs. Let's do
similar to make kallsysms for PowerPC always succeed in 2 steps.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Linus Torvalds [Thu, 24 Sep 2020 15:41:32 +0000 (08:41 -0700)]
mm: fix misplaced unlock_page in do_wp_page()
Commit
09854ba94c6a ("mm: do_wp_page() simplification") reorganized all
the code around the page re-use vs copy, but in the process also moved
the final unlock_page() around to after the wp_page_reuse() call.
That normally doesn't matter - but it means that the unlock_page() is
now done after releasing the page table lock. Again, not a big deal,
you'd think.
But it turns out that it's very wrong indeed, because once we've
released the page table lock, we've basically lost our only reference to
the page - the page tables - and it could now be free'd at any time. We
do hold the mmap_sem, so no actual unmap() can happen, but madvise can
come in and a MADV_DONTNEED will zap the page range - and free the page.
So now the page may be free'd just as we're unlocking it, which in turn
will usually trigger a "Bad page state" error in the freeing path. To
make matters more confusing, by the time the debug code prints out the
page state, the unlock has typically completed and everything looks fine
again.
This all doesn't happen in any normal situations, but it does trigger
with the dirtyc0w_child LTP test. And it seems to trigger much more
easily (but not expclusively) on s390 than elsewhere, probably because
s390 doesn't do the "batch pages up for freeing after the TLB flush"
that gives the unlock_page() more time to complete and makes the race
harder to hit.
Fixes:
09854ba94c6a ("mm: do_wp_page() simplification")
Link: https://lore.kernel.org/lkml/a46e9bbef2ed4e17778f5615e818526ef848d791.camel@redhat.com/
Link: https://lore.kernel.org/linux-mm/c41149a8-211e-390b-af1d-d5eee690fecb@linux.alibaba.com/
Reported-by: Qian Cai <cai@redhat.com>
Reported-by: Alex Shi <alex.shi@linux.alibaba.com>
Bisected-and-analyzed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Tested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ray Jui [Thu, 10 Sep 2020 15:25:38 +0000 (08:25 -0700)]
spi: bcm-qspi: Fix probe regression on iProc platforms
iProc chips have QSPI controller that does not have the MSPI_REV
offset. Reading from that offset will cause a bus error. Fix it by
having MSPI_REV query disabled in the generic compatible string.
Fixes:
3a01f04d74ef ("spi: bcm-qspi: Handle lack of MSPI_REV offset")
Link: https://lore.kernel.org/linux-arm-kernel/20200909211857.4144718-1-f.fainelli@gmail.com/T/#u
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200910152539.45584-3-ray.jui@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Jason Wang [Mon, 7 Sep 2020 10:43:43 +0000 (18:43 +0800)]
vhost-vdpa: fix backend feature ioctls
Commit
653055b9acd4 ("vhost-vdpa: support get/set backend features")
introduces two malfunction backend features ioctls:
1) the ioctls was blindly added to vring ioctl instead of vdpa device
ioctl
2) vhost_set_backend_features() was called when dev mutex has already
been held which will lead a deadlock
This patch fixes the above issues.
Cc: Eli Cohen <elic@nvidia.com>
Reported-by: Zhu Lingshan <lingshan.zhu@intel.com>
Fixes:
653055b9acd4 ("vhost-vdpa: support get/set backend features")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200907104343.31141-1-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eli Cohen [Tue, 30 Jun 2020 05:29:25 +0000 (08:29 +0300)]
vhost: Fix documentation
Fix documentation to match actual function prototypes
"end" used instead of "last". Fix that.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Link: https://lore.kernel.org/r/20200630052925.GA157062@mtl-vdi-166.wap.labs.mlnx
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Yu Kuai [Fri, 18 Sep 2020 01:13:35 +0000 (09:13 +0800)]
iommu/exynos: add missing put_device() call in exynos_iommu_of_xlate()
if of_find_device_by_node() succeed, exynos_iommu_of_xlate() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes:
aa759fd376fb ("iommu/exynos: Add callback for initializing devices from device tree")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200918011335.909141-1-yukuai3@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Christian Borntraeger [Mon, 21 Sep 2020 10:48:36 +0000 (12:48 +0200)]
s390/zcrypt: Fix ZCRYPT_PERDEV_REQCNT ioctl
reqcnt is an u32 pointer but we do copy sizeof(reqcnt) which is the
size of the pointer. This means we only copy 8 byte. Let us copy
the full monty.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: stable@vger.kernel.org
Fixes:
af4a72276d49 ("s390/zcrypt: Support up to 256 crypto adapters.")
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Linus Torvalds [Wed, 23 Sep 2020 21:52:22 +0000 (14:52 -0700)]
Merge tag 'trace-v5.9-rc5-2' of git://git./linux/kernel/git/rostedt/linux-trace
Pull bootconfig fixes from Steven Rostedt:
"A couple of fixes for bootconfig.
Masami discovered two bugs which this fixes and he added tests to
cover these issues.
- Fix a bug that breaks bootconfig tree nodes
- Fix a bug that does not truncate whitespace properly
- Add tests to cover the above two cases"
* tag 'trace-v5.9-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tools/bootconfig: Add testcase for tailing space
tools/bootconfig: Add testcases for repeated key with brace
lib/bootconfig: Fix to remove tailing spaces after value
lib/bootconfig: Fix a bug of breaking existing tree nodes
Linus Torvalds [Wed, 23 Sep 2020 21:38:21 +0000 (14:38 -0700)]
Merge tag 'for-5.9/dm-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- DM core fix for incorrect double bio splitting. Keep "fixing" this
because past attempts didn't fully appreciate the liability relative
to recursive bio splitting. This fix limits DM's bio splitting to a
single method and does _not_ use blk_queue_split() for normal IO.
- DM crypt Documentation updates for features added during 5.9 merge.
* tag 'for-5.9/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm crypt: document encrypted keyring key option
dm crypt: document new no_workqueue flags
dm: fix comment in dm_process_bio()
dm: fix bio splitting and its bio completion order for regular IO
Linus Torvalds [Wed, 23 Sep 2020 21:32:23 +0000 (14:32 -0700)]
Merge tag 'for-5.9-rc6-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"syzkaller started to hit us with reports, here's a fix for one type
(stack overflow when printing checksums on read error).
The other patch is a fix for sysfs object, we have a test for that and
it leads to a crash."
* tag 'for-5.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix put of uninitialized kobject after seed device delete
btrfs: fix overflow when copying corrupt csums for a message
Thomas Gleixner [Wed, 23 Sep 2020 15:46:20 +0000 (17:46 +0200)]
x86/ioapic: Unbreak check_timer()
Several people reported in the kernel bugzilla that between v4.12 and v4.13
the magic which works around broken hardware and BIOSes to find the proper
timer interrupt delivery mode stopped working for some older affected
platforms which need to fall back to ExtINT delivery mode.
The reason is that the core code changed to keep track of the masked and
disabled state of an interrupt line more accurately to avoid the expensive
hardware operations.
That broke an assumption in i8259_make_irq() which invokes
disable_irq_nosync();
irq_set_chip_and_handler();
enable_irq();
Up to v4.12 this worked because enable_irq() unconditionally unmasked the
interrupt line, but after the state tracking improvements this is not
longer the case because the IO/APIC uses lazy disabling. So the line state
is unmasked which means that enable_irq() does not call into the new irq
chip to unmask it.
In principle this is a shortcoming of the core code, but it's more than
unclear whether the core code should try to reset state. At least this
cannot be done unconditionally as that would break other existing use cases
where the chip type is changed, e.g. when changing the trigger type, but
the callers expect the state to be preserved.
As the way how check_timer() is switching the delivery modes is truly
unique, the obvious fix is to simply unmask the i8259 manually after
changing the mode to ExtINT delivery and switching the irq chip to the
legacy PIC.
Note, that the fixes tag is not really precise, but identifies the commit
which broke the assumptions in the IO/APIC and i8259 code and that's the
kernel version to which this needs to be backported.
Fixes:
bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls")
Reported-by: p_c_chan@hotmail.com
Reported-by: ecm4@mail.com
Reported-by: perdigao1@yahoo.com
Reported-by: matzes@users.sourceforge.net
Reported-by: rvelascog@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: p_c_chan@hotmail.com
Tested-by: matzes@users.sourceforge.net
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197769
Chaitanya Kulkarni [Tue, 22 Sep 2020 19:49:38 +0000 (12:49 -0700)]
nvme-core: don't use NVME_NSID_ALL for command effects and supported log
In the function nvme_get_effects_log() it uses NVME_NSID_ALL which has
namespace scope. The command effect log page is controller specific.
Replace NVME_NSID_ALL with 0x00 which specifies the controller scope
instead of namespace scope.
Fixes:
84fef62d135b ("nvme: check admin passthru command effects")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209287
Reported-by: Huai-Cheng Kuo <hh81478072@gmail.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Linus Torvalds [Wed, 23 Sep 2020 17:04:16 +0000 (10:04 -0700)]
mm: move the copy_one_pte() pte_present check into the caller
This completes the split of the non-present and present pte cases by
moving the check for the source pte being present into the single
caller, which also means that we clearly separate out the very different
return value case for a non-present pte.
The present pte case currently always succeeds.
This is a pure code re-organization with no semantic change: the intent
is to make it much easier to add a new return case to the present pte
case for when we do early COW at page table copy time.
This was split out from the previous commit simply to make it easy to
visually see that there were no semantic changes from this code
re-organization.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 23 Sep 2020 16:56:59 +0000 (09:56 -0700)]
mm: split out the non-present case from copy_one_pte()
This is a purely mechanical split of the copy_one_pte() function. It's
not immediately obvious when looking at the diff because of the
indentation change, but the way to see what is going on in this commit
is to use the "-w" flag to not show pure whitespace changes, and you see
how the first part of copy_one_pte() is simply lifted out into a
separate function.
And since the non-present case is marked unlikely, don't make the new
function be inlined. Not that gcc really seems to care, since it looks
like it will inline it anyway due to the whole "single callsite for
static function" logic. In fact, code generation with the function
split is almost identical to before. But not marking it inline is the
right thing to do.
This is pure prep-work and cleanup for subsequent changes.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sascha Hauer [Wed, 23 Sep 2020 13:10:26 +0000 (15:10 +0200)]
spi: fsl-dspi: fix use-after-free in remove path
spi_unregister_controller() not only unregisters the controller, but
also frees the controller. This will free the driver data with it, so
we must not access it later dspi_remove().
Solve this by allocating the driver data separately from the SPI
controller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20200923131026.20707-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Icenowy Zheng [Wed, 23 Sep 2020 00:51:42 +0000 (08:51 +0800)]
regulator: axp20x: fix LDO2/4 description
Currently we wrongly set the mask of value of LDO2/4 both to the mask of
LDO2, and the LDO4 voltage configuration is left untouched. This leads
to conflict when LDO2/4 are both in use.
Fix this issue by setting different vsel_mask to both regulators.
Fixes:
db4a555f7c4c ("regulator: axp20x: use defines for masks")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Link: https://lore.kernel.org/r/20200923005142.147135-1-icenowy@aosc.io
Signed-off-by: Mark Brown <broonie@kernel.org>