Wang Hai [Fri, 4 Sep 2020 13:01:57 +0000 (21:01 +0800)]
NFC: digital: Remove two unused macroes
DIGITAL_NFC_DEP_REQ_RES_TAILROOM is never used after it was introduced.
DIGITAL_NFC_DEP_REQ_RES_HEADROOM is no more used after below
commit
e8e7f4217564 ("NFC: digital: Remove useless call to skb_reserve()")
Remove them.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wang Hai [Fri, 4 Sep 2020 12:58:58 +0000 (20:58 +0800)]
caif: Remove duplicate macro SRVL_CTRL_PKT_SIZE
Remove SRVL_CTRL_PKT_SIZE which is defined more than once.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lukas Bulwahn [Sat, 5 Sep 2020 10:37:00 +0000 (12:37 +0200)]
MAINTAINERS: repair reference in LYNX PCS MODULE
Commit
0da4c3d393e4 ("net: phy: add Lynx PCS module") added the files in
./drivers/net/pcs/, but the new LYNX PCS MODULE section refers to
./drivers/net/phy/.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains:
warning: no file matches F: drivers/net/phy/pcs-lynx.c
Repair the LYNX PCS MODULE section by referring to the right location.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 5 Sep 2020 20:09:16 +0000 (13:09 -0700)]
Merge branch 'net-dsa-bcm_sf2-Ensure-MDIO-diversion-is-used'
Florian Fainelli says:
====================
net: dsa: bcm_sf2: Ensure MDIO diversion is used
Changes in v2:
- export of_update_property() to permit building bcm_sf2 as a module
- provided a better explanation of the problem being solved after
explaining it to Andrew during the v1 review
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Fainelli [Fri, 4 Sep 2020 21:37:30 +0000 (14:37 -0700)]
net: dsa: bcm_sf2: Ensure that MDIO diversion is used
Registering our slave MDIO bus outside of the OF infrastructure is
necessary in order to avoid creating double references of the same
Device Tree nodes, however it is not sufficient to guarantee that the
MDIO bus diversion is used because of_phy_connect() will still resolve
to a valid PHY phandle and it will connect to the PHY using its parent
MDIO bus which is still the SF2 master MDIO bus. The reason for that is
because BCM7445 systems were already shipped with a Device Tree blob
looking like this (irrelevant parts omitted for simplicity):
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
phy-mode = "rgmii-txid";
phy-handle = <&phy0>;
reg = <1>;
label = "rgmii_1";
};
...
mdio@403c0 {
...
phy0: ethernet-phy@0 {
broken-turn-around;
device_type = "ethernet-phy";
max-speed = <0x3e8>;
reg = <0>;
compatible = "brcm,bcm53125", "ethernet-phy-ieee802.3-c22";
};
};
There is a hardware issue with chip revisions (Dx) that lead to the
development of the following commits:
461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus")
536fab5bf582 ("net: dsa: bcm_sf2: Do not register slave MDIO bus with OF")
b8c6cd1d316f ("net: dsa: bcm_sf2: do not use indirect reads and writes for 7445E0")
There should have been an internal MDIO bus node created for the chip
revision (Dx) that suffers from this problem, but it did not happen back
then.
Had that happen, that we should have correctly parented phy@0 (bcm53125
below) as child node of the internal MDIO bus, but the production Device
Tree blob that was shipped with the firmware targeted the fixed version
of the chip, despite both the affected and corrected chips being shipped
into production.
The problem is that of_phy_connect() for port@1 will happily resolve the
'phy-handle' from the mdio@403c0 node, which bypasses the diversion
completely. This results in this double programming that the diversion
refers to and aims to avoid. In order to force of_phy_connect() to fail,
and have DSA call to dsa_slave_phy_connect(), we must deactivate
ethernet-phy@0 from mdio@403c0, and the best way to do that is by
removing the phandle property completely.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Fainelli [Fri, 4 Sep 2020 21:37:29 +0000 (14:37 -0700)]
of: Export of_remove_property() to modules
We will need to remove some OF properties in drivers/net/dsa/bcm_sf2.c
with a subsequent commit. Export of_remove_property() to modules so we
can keep bcm_sf2 modular and provide an empty stub for when CONFIG_OF is
disabled to maintain the ability to compile test.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 5 Sep 2020 19:25:17 +0000 (12:25 -0700)]
Merge branch 'sfc-TXQ-refactor'
Edward Cree says:
====================
sfc: TXQ refactor
Refactor and unify partner-TXQ handling in the EF100 and legacy drivers.
The main thrust of this series is to remove from the legacy (Siena/EF10)
driver the assumption that a netdev TX queue has precisely two hardware
TXQs (checksummed and unchecksummed) associated with it, so that in
future we can have more (e.g. for handling inner-header checksums) or
fewer (e.g. to free up hardware queues for XDP usage).
Changes from v1:
* better explain patch #1 in the commit message, and rename
xmit_more_available to xmit_pending
* add new patch #2 applying the same approach to ef100, for consistency
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Thu, 3 Sep 2020 21:35:37 +0000 (22:35 +0100)]
sfc: remove efx_tx_queue_partner
All users of this function are now gone.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Thu, 3 Sep 2020 21:35:29 +0000 (22:35 +0100)]
sfc: rewrite efx_tx_may_pio
Use efx_for_each_channel_tx_queue() rather than efx_tx_queue_partner().
Make some related simplifications of efx_nic_tx_is_empty() to remove
entry points that aren't used.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Thu, 3 Sep 2020 21:35:13 +0000 (22:35 +0100)]
sfc: use efx_channel_tx_[old_]fill_level() in Siena/EF10 TX datapath
Instead of open-coding the calculation with efx_tx_queue_partner(), use
the functions that iterate over numbers of queues other than 2 with
efx_for_each_channel_tx_queue().
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Thu, 3 Sep 2020 21:34:57 +0000 (22:34 +0100)]
sfc: use tx_queue->old_read_count in EF100 TX path
As in the Siena/EF10 case, it minimises cacheline ping-pong between
the TX and completion paths.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Thu, 3 Sep 2020 21:34:42 +0000 (22:34 +0100)]
sfc: make ef100 xmit_more handling look more like ef10's
This should cause no functional change; merely make there only be one
design of xmit_more handling to understand. As with the EF10/Siena
version, we set tx_queue->xmit_pending when we queue up a TX, and
clear it when we ring the doorbell (in ef100_notify_tx_desc).
While we're at it, make ef100_notify_tx_desc static since nothing
outside of ef100_tx.c uses it.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Thu, 3 Sep 2020 21:34:15 +0000 (22:34 +0100)]
sfc: add and use efx_tx_send_pending in tx.c
Instead of using efx_tx_queue_partner(), which relies on the assumption
that tx_queues_per_channel is 2, efx_tx_send_pending() iterates over
txqs with efx_for_each_channel_tx_queue().
We unconditionally set tx_queue->xmit_pending (renamed from
xmit_more_available), then condition on xmit_more for the call to
efx_tx_send_pending(), which will clear xmit_pending. Thus, after an
xmit_more TX, the doorbell is un-rung and xmit_pending is true.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 5 Sep 2020 04:18:58 +0000 (21:18 -0700)]
Merge git://git./linux/kernel/git/netdev/net
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.
Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit
507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 4 Sep 2020 20:46:33 +0000 (13:46 -0700)]
Merge tag 's390-5.9-5' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix GENERIC_LOCKBREAK dependency on PREEMPTION in Kconfig broken
because of a typo
- Update defconfigs
* tag 's390-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390: fix GENERIC_LOCKBREAK dependency typo in Kconfig
Linus Torvalds [Fri, 4 Sep 2020 20:40:59 +0000 (13:40 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix the loading of modules built with binutils-2.35. This version
produces writable and executable .text.ftrace_trampoline section
which is rejected by the kernel.
- Remove the exporting of cpu_logical_map() as the Tegra driver has now
been fixed and no longer uses this function.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/module: set trampoline section flags regardless of CONFIG_DYNAMIC_FTRACE
arm64: Remove exporting cpu_logical_map symbol
Linus Torvalds [Fri, 4 Sep 2020 20:37:19 +0000 (13:37 -0700)]
Merge tag 'mips_fixes_5.9_1' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
"A few MIPS fixes:
- fallthrough fallout fix
- BMIPS fixes
- MSA fix to avoid leaking MSA register contents
- Loongson perf and cpu feature fix
- SNI interrupt fix"
* tag 'mips_fixes_5.9_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: SNI: Fix SCSI interrupt
MIPS: add missing MSACSR and upper MSA initialization
MIPS: perf: Fix wrong check condition of Loongson event IDs
mips/oprofile: Fix fallthrough placement
MIPS: Loongson64: Remove unnecessary inclusion of boot_param.h
MIPS: BMIPS: Also call bmips_cpu_setup() for secondary cores
MIPS: mm: BMIPS5000 has inclusive physical caches
MIPS: Loongson64: Do not override watch and ejtag feature
Linus Torvalds [Fri, 4 Sep 2020 20:34:52 +0000 (13:34 -0700)]
Merge tag 'kbuild-fixes-v5.9-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix documents
- fix warning in 'make localmodconfig'
* tag 'kbuild-fixes-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: remove redundant assignment prompt = prompt
kbuild: Documentation: clean up makefiles.rst
kconfig: streamline_config.pl: check defined(ENV variable) before using it
Documentation/llvm: Improve formatting of commands, variables, and arguments
Linus Torvalds [Fri, 4 Sep 2020 20:27:24 +0000 (13:27 -0700)]
Merge tag 'pm-5.9-rc4' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix reference counting in the operating performance points (OPP)
framework and address a few intel_pstate driver issues, mostly related
to switching driver operation modes and similar with hardware-managed
P-states (HWP) enabled.
Specifics:
- Fix reference counting of operating performance points (OPP) tables
(Viresh Kumar).
- Address intel_pstate driver interface issues, mostly related to
switching operation modes and handling CPU offline and online and
system-wide suspend/resume with hardware-managed P-states (HWP)
enabled (Rafael Wysocki).
- Fix the maximum frequency computation in the intel_pstate driver
with turbo P-states disabled by the platform firmware and HWP
enabled (Francisco Jerez)"
* tag 'pm-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled
cpufreq: intel_pstate: Free memory only when turning off
cpufreq: intel_pstate: Add ->offline and ->online callbacks
cpufreq: intel_pstate: Tweak the EPP sysfs interface
cpufreq: intel_pstate: Update cached EPP in the active mode
cpufreq: intel_pstate: Refuse to turn off with HWP enabled
opp: Don't drop reference for an OPP table that was never parsed
Linus Torvalds [Fri, 4 Sep 2020 20:19:19 +0000 (13:19 -0700)]
Merge tag 'libata-5.9-2020-09-04' of git://git.kernel.dk/linux-block
Pull libata fixes from Jens Axboe:
- improve Sandisks ATA_HORKAGE on NCQ (Tejun)
- link printk cleanup (Xu)
* tag 'libata-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks
ata: ahci: use ata_link_info() instead of ata_link_printk()
Linus Torvalds [Fri, 4 Sep 2020 20:04:51 +0000 (13:04 -0700)]
Merge tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A bit larger than usual this week, mostly due to the NVMe fixes
arriving late for -rc3 and hence didn't make last weeks pull request.
- NVMe:
- instance leak and io boundary fixes from Keith
- fc locking fix from Christophe
- various tcp/rdma reset during traffic fixes from Sagi
- pci use-after-free fix from Tong
- tcp target null deref fix from Ziye
- Locking fix for partition removal (Christoph)
- Ensure bdi->io_pages is always set (me)
- Fixup for hd struct reference (Ming)
- Fix for zero length bvecs (Ming)
- Two small blk-iocost fixes (Tejun)"
* tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
block: allow for_each_bvec to support zero len bvec
blk-stat: make q->stats->lock irqsafe
blk-iocost: ioc_pd_free() shouldn't assume irq disabled
block: fix locking in bdev_del_partition
block: release disk reference in hd_struct_free_work
block: ensure bdi->io_pages is always initialized
nvme-pci: cancel nvme device request before disabling
nvme: only use power of two io boundaries
nvme: fix controller instance leak
nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()'
nvme: Fix NULL dereference for pci nvme controllers
nvme-rdma: fix reset hang if controller died in the middle of a reset
nvme-rdma: fix timeout handler
nvme-rdma: serialize controller teardown sequences
nvme-tcp: fix reset hang if controller died in the middle of a reset
nvme-tcp: fix timeout handler
nvme-tcp: serialize controller teardown sequences
nvme: have nvme_wait_freeze_timeout return if it timed out
nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance
nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu
Linus Torvalds [Fri, 4 Sep 2020 19:55:22 +0000 (12:55 -0700)]
Merge tag 'io_uring-5.9-2020-09-04' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- EAGAIN with O_NONBLOCK retry fix
- Two small fixes for registered files (Jiufei)
* tag 'io_uring-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
io_uring: no read/write-retry on -EAGAIN error and O_NONBLOCK marked file
io_uring: set table->files[i] to NULL when io_sqe_file_register failed
io_uring: fix removing the wrong file in __io_sqe_files_update()
Linus Torvalds [Fri, 4 Sep 2020 19:49:03 +0000 (12:49 -0700)]
Merge tag 'thermal-v5.9-rc4' of git://git./linux/kernel/git/thermal/linux
Pull thermal fixes from Daniel Lezcano:
- Fix bogus thermal shutdowns for omap4430 where bogus values resulting
from an incorrect ADC conversion are too high and fire an emergency
shutdown (Tony Lindgren)
- Don't suppress negative temp for qcom spmi as they are valid and
userspace needs them (Veera Vegivada)
- Fix use-after-free in thermal_zone_device_unregister reported by
Kasan (Dmitry Osipenko)
* tag 'thermal-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal: core: Fix use-after-free in thermal_zone_device_unregister()
thermal: qcom-spmi-temp-alarm: Don't suppress negative temp
thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430
Linus Torvalds [Fri, 4 Sep 2020 19:12:39 +0000 (12:12 -0700)]
Merge tag 'dmaengine-fix-5.9-rc4' of git://git./linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A couple of core fixes and odd driver fixes for dmaengine subsystem:
Core:
- drop ACPI CSRT table reference after using it
- fix of_dma_router_xlate() error handling
Drivers fixes in idxd, at_hdmac, pl330, dw-edma and jz478"
* tag 'dmaengine-fix-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ti: k3-udma: Update rchan_oes_offset for am654 SYSFW ABI 3.0
drivers/dma/dma-jz4780: Fix race condition between probe and irq handler
dmaengine: dw-edma: Fix scatter-gather address calculation
dmaengine: ti: k3-udma: Fix the TR initialization for prep_slave_sg
dmaengine: pl330: Fix burst length if burst size is smaller than bus width
dmaengine: at_hdmac: add missing kfree() call in at_dma_xlate()
dmaengine: at_hdmac: add missing put_device() call in at_dma_xlate()
dmaengine: at_hdmac: check return value of of_find_device_by_node() in at_dma_xlate()
dmaengine: of-dma: Fix of_dma_router_xlate's of_dma_xlate handling
dmaengine: idxd: reset states after device disable or reset
dmaengine: acpi: Put the CSRT table after using it
Linus Torvalds [Fri, 4 Sep 2020 19:05:25 +0000 (12:05 -0700)]
Merge tag 'sound-5.9-rc4' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small changes, nothing intrusive:
- remaining tasklet API conversions, now all sound stuff have been
converted
- a few HD-audio and USB-audio quirks and minor fixes
- FireWire Tascam and Digi00xx fixes
- drop a kernel WARNING from PCM OSS for syzkaller"
* tag 'sound-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
ALSA: hda/realtek - Improved routing for Thinkpad X1 7th/8th Gen
ALSA: hda: use consistent HDAudio spelling in comments/docs
ALSA: hda: add dev_dbg log when driver is not selected
ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled
ALSA: hda: hdmi - add Rocketlake support
ALSA: ua101: convert tasklets to use new tasklet_setup() API
ALSA: usb-audio: convert tasklets to use new tasklet_setup() API
ASoC: txx9: convert tasklets to use new tasklet_setup() API
ASoC: siu: convert tasklets to use new tasklet_setup() API
ASoC: fsl_esai: convert tasklets to use new tasklet_setup() API
ALSA: hdsp: convert tasklets to use new tasklet_setup() API
ALSA: riptide: convert tasklets to use new tasklet_setup() API
ALSA: pci/asihpi: convert tasklets to use new tasklet_setup() API
ALSA: firewire: convert tasklets to use new tasklet_setup() API
ALSA: core: convert tasklets to use new tasklet_setup() API
ALSA: pcm: oss: Remove superfluous WARN_ON() for mulaw sanity check
ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRO
ALSA: hda/hdmi: always check pin power status in i915 pin fixup
ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion NT950XCJ-X716A
ALSA: usb-audio: Add basic capture support for Pioneer DJ DJM-250MK2
...
Linus Torvalds [Fri, 4 Sep 2020 18:59:44 +0000 (11:59 -0700)]
Merge tag 'drm-fixes-2020-09-04' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Not much going on this week, nouveau has a display hw bug workaround,
amdgpu has some PM fixes and CIK regression fixes, one single radeon
PLL fix, and a couple of i915 display fixes.
amdgpu:
- Fix for 32bit systems
- SW CTF fix
- Update for Sienna Cichlid
- CIK bug fixes
radeon:
- PLL fix
i915:
- Clang build warning fix
- HDCP fixes
nouveau:
- display fixes"
* tag 'drm-fixes-2020-09-04' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/kms/nv50-gp1xx: add WAR for EVO push buffer HW bug
drm/nouveau/kms/nv50-gp1xx: disable notifies again after core update
drm/nouveau/kms/nv50-: add some whitespace before debug message
drm/nouveau/kms/gv100-: Include correct push header in crcc37d.c
drm/radeon: Prefer lower feedback dividers
drm/amdgpu: Fix bug in reporting voltage for CIK
drm/amdgpu: Specify get_argument function for ci_smu_funcs
drm/amd/pm: enable MP0 DPM for sienna_cichlid
drm/amd/pm: avoid false alarm due to confusing softwareshutdowntemp setting
drm/amd/pm: fix is_dpm_running() run error on 32bit system
drm/i915: Clear the repeater bit on HDCP disable
drm/i915: Fix sha_text population code
drm/i915/display: Ensure that ret is always initialized in icl_combo_phy_verify_state
Or Cohen [Fri, 4 Sep 2020 04:05:28 +0000 (21:05 -0700)]
net/packet: fix overflow in tpacket_rcv
Using tp_reserve to calculate netoff can overflow as
tp_reserve is unsigned int and netoff is unsigned short.
This may lead to macoff receving a smaller value then
sizeof(struct virtio_net_hdr), and if po->has_vnet_hdr
is set, an out-of-bounds write will occur when
calling virtio_net_hdr_from_skb.
The bug is fixed by converting netoff to unsigned int
and checking if it exceeds USHRT_MAX.
This addresses CVE-2020-14386
Fixes: 8913336a7e8d ("packet: add PACKET_RESERVE sockopt")
Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 4 Sep 2020 16:31:54 +0000 (09:31 -0700)]
Merge branch 'simplify-do_wp_page'
Merge emailed patches from Peter Xu:
"This is a small series that I picked up from Linus's suggestion to
simplify cow handling (and also make it more strict) by checking
against page refcounts rather than mapcounts.
This makes uffd-wp work again (verified by running upmapsort)"
Note: this is horrendously bad timing, and making this kind of
fundamental vm change after -rc3 is not at all how things should work.
The saving grace is that it really is a a nice simplification:
8 files changed, 29 insertions(+), 120 deletions(-)
The reason for the bad timing is that it turns out that commit
17839856fd58 ("gup: document and work around 'COW can break either way'
issue" broke not just UFFD functionality (as Peter noticed), but Mikulas
Patocka also reports that it caused issues for strace when running in a
DAX environment with ext4 on a persistent memory setup.
And we can't just revert that commit without re-introducing the original
issue that is a potential security hole, so making COW stricter (and in
the process much simpler) is a step to then undoing the forced COW that
broke other uses.
Link: https://lore.kernel.org/lkml/alpine.LRH.2.02.2009031328040.6929@file01.intranet.prod.int.rdu2.redhat.com/
* emailed patches from Peter Xu <peterx@redhat.com>:
mm: Add PGREUSE counter
mm/gup: Remove enfornced COW mechanism
mm/ksm: Remove reuse_ksm_page()
mm: do_wp_page() simplification
Rafael J. Wysocki [Fri, 4 Sep 2020 16:31:25 +0000 (18:31 +0200)]
Merge branch 'pm-cpufreq'
* pm-cpufreq:
cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled
cpufreq: intel_pstate: Free memory only when turning off
cpufreq: intel_pstate: Add ->offline and ->online callbacks
cpufreq: intel_pstate: Tweak the EPP sysfs interface
cpufreq: intel_pstate: Update cached EPP in the active mode
cpufreq: intel_pstate: Refuse to turn off with HWP enabled
Peter Xu [Fri, 21 Aug 2020 23:49:58 +0000 (19:49 -0400)]
mm: Add PGREUSE counter
This accounts for wp_page_reuse() case, where we reused a page for COW.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Xu [Fri, 21 Aug 2020 23:49:57 +0000 (19:49 -0400)]
mm/gup: Remove enfornced COW mechanism
With the more strict (but greatly simplified) page reuse logic in
do_wp_page(), we can safely go back to the world where cow is not
enforced with writes.
This essentially reverts commit
17839856fd58 ("gup: document and work
around 'COW can break either way' issue"). There are some context
differences due to some changes later on around it:
2170ecfa7688 ("drm/i915: convert get_user_pages() --> pin_user_pages()", 2020-06-03)
376a34efa4ee ("mm/gup: refactor and de-duplicate gup_fast() code", 2020-06-03)
Some lines moved back and forth with those, but this revert patch should
have striped out and covered all the enforced cow bits anyways.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Xu [Fri, 21 Aug 2020 23:49:56 +0000 (19:49 -0400)]
mm/ksm: Remove reuse_ksm_page()
Remove the function as the last reference has gone away with the do_wp_page()
changes.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 21 Aug 2020 23:49:55 +0000 (19:49 -0400)]
mm: do_wp_page() simplification
How about we just make sure we're the only possible valid user fo the
page before we bother to reuse it?
Simplify, simplify, simplify.
And get rid of the nasty serialization on the page lock at the same time.
[peterx: add subject prefix]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Leon Romanovsky [Fri, 4 Sep 2020 15:58:08 +0000 (18:58 +0300)]
gcov: Disable gcov build with GCC 10
GCOV built with GCC 10 doesn't initialize n_function variable. This
produces different kernel panics as was seen by Colin in Ubuntu and me
in FC 32.
As a workaround, let's disable GCOV build for broken GCC 10 version.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891288
Link: https://lore.kernel.org/lkml/20200827133932.3338519-1-leon@kernel.org
Link: https://lore.kernel.org/lkml/CAHk-=whbijeSdSvx-Xcr0DPMj0BiwhJ+uiNnDSVZcr_h_kg7UA@mail.gmail.com/
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Barret Rhoden [Fri, 4 Sep 2020 13:53:32 +0000 (09:53 -0400)]
init: fix error check in clean_path()
init_stat() returns 0 on success, same as vfs_lstat(). When it replaced
vfs_lstat(), the '!' was dropped.
Fixes: 716308a5331b ("init: add an init_stat helper")
Signed-off-by: Barret Rhoden <brho@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry Osipenko [Mon, 17 Aug 2020 23:58:54 +0000 (02:58 +0300)]
thermal: core: Fix use-after-free in thermal_zone_device_unregister()
The user-after-free bug in thermal_zone_device_unregister() is reported by
KASAN. It happens because struct thermal_zone_device is released during of
device_unregister() invocation, and hence the "tz" variable shouldn't be
touched by thermal_notify_tz_delete(tz->id).
Fixes: 55cdf0a283b8 ("thermal: core: Add notifications call in the framework")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200817235854.26816-1-digetx@gmail.com
Veera Vegivada [Wed, 29 Jul 2020 16:52:51 +0000 (09:52 -0700)]
thermal: qcom-spmi-temp-alarm: Don't suppress negative temp
Currently driver is suppressing the negative temperature
readings from the vadc. Consumers of the thermal zones need
to read the negative temperature too. Don't suppress the
readings.
Fixes: c610afaa21d3c6e ("thermal: Add QPNP PMIC temperature alarm driver")
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/944856eb819081268fab783236a916257de120e4.1596040416.git.gurus@codeaurora.org
Tony Lindgren [Mon, 6 Jul 2020 18:33:38 +0000 (11:33 -0700)]
thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430
We can sometimes get bogus thermal shutdowns on omap4430 at least with
droid4 running idle with a battery charger connected:
thermal thermal_zone0: critical temperature reached (143 C), shutting down
Dumping out the register values shows we can occasionally get a 0x7f value
that is outside the TRM listed values in the ADC conversion table. And then
we get a normal value when reading again after that. Reading the register
multiple times does not seem help avoiding the bogus values as they stay
until the next sample is ready.
Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we
should have values from 13 to 107 listed with a total of 95 values. But
looking at the omap4430_adc_to_temp array, the values are off, and the
end values are missing. And it seems that the 4430 ADC table is similar
to omap3630 rather than omap4460.
Let's fix the issue by using values based on the omap3630 table and just
ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has
the missing values added while the TRM table only shows every second
value.
Note that sometimes the ADC register values within the valid table can
also be way off for about 1 out of 10 values. But it seems that those
just show about 25 C too low values rather than too high values. So those
do not cause a bogus thermal shutdown.
Fixes: 1a31270e54d7 ("staging: omap-thermal: add OMAP4 data structures")
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.com
Linus Torvalds [Fri, 4 Sep 2020 02:10:43 +0000 (19:10 -0700)]
Merge tag 'perf-tools-fixes-for-v5.9-2020-09-03' of git://git./linux/kernel/git/acme/linux
Pull more perf tools fixes from Arnaldo Carvalho de Melo:
- Use uintptr_t when casting numbers to pointers
- Keep output expected by 3rd parties: Turn off summary for interval
mode by default.
- BPF is in kernel space, make sure do_validate_kcore_modules() knows
about that.
- Explicitly call out event modifiers in the documentation.
- Fix jevents() allocation of space for regular expressions.
- Address libtraceevent build warnings on 32-bit arches.
- Fix checking of functions returns using ERR_PTR() in 'perf bench'.
* tag 'perf-tools-fixes-for-v5.9-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Add bpf image check to __map__is_kmodule
perf record/stat: Explicitly call out event modifiers in the documentation
perf bench: The do_run_multi_threaded() function must use IS_ERR(perf_session__new())
perf stat: Turn off summary for interval mode by default
libtraceevent: Fix build warning on 32-bit arches
perf jevents: Fix suspicious code in fixregex()
perf parse-events: Use uintptr_t when casting numbers to pointers
Linus Torvalds [Fri, 4 Sep 2020 01:50:48 +0000 (18:50 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi
Kivilinna.
2) Fix loss of RTT samples in rxrpc, from David Howells.
3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu.
4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka.
5) We disable BH for too lokng in sctp_get_port_local(), add a
cond_resched() here as well, from Xin Long.
6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu.
7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from
Yonghong Song.
8) Missing of_node_put() in mt7530 DSA driver, from Sumera
Priyadarsini.
9) Fix crash in bnxt_fw_reset_task(), from Michael Chan.
10) Fix geneve tunnel checksumming bug in hns3, from Yi Li.
11) Memory leak in rxkad_verify_response, from Dinghao Liu.
12) In tipc, don't use smp_processor_id() in preemptible context. From
Tuong Lien.
13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu.
14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter.
15) Fix ABI mismatch between driver and firmware in nfp, from Louis
Peens.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits)
net/smc: fix sock refcounting in case of termination
net/smc: reset sndbuf_desc if freed
net/smc: set rx_off for SMCR explicitly
net/smc: fix toleration of fake add_link messages
tg3: Fix soft lockup when tg3_reset_task() fails.
doc: net: dsa: Fix typo in config code sample
net: dp83867: Fix WoL SecureOn password
nfp: flower: fix ABI mismatch between driver and firmware
tipc: fix shutdown() of connectionless socket
ipv6: Fix sysctl max for fib_multipath_hash_policy
drivers/net/wan/hdlc: Change the default of hard_header_len to 0
net: gemini: Fix another missing clk_disable_unprepare() in probe
net: bcmgenet: fix mask check in bcmgenet_validate_flow()
amd-xgbe: Add support for new port mode
net: usb: dm9601: Add USB ID of Keenetic Plus DSL
vhost: fix typo in error message
net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
pktgen: fix error message with wrong function name
net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
cxgb4: fix thermal zone device registration
...
Linus Torvalds [Fri, 4 Sep 2020 01:43:06 +0000 (18:43 -0700)]
Merge branch 'gate-page-refcount' (patches from Dave Hansen)
Merge gate page refcount fix from Dave Hansen:
"During the conversion over to pin_user_pages(), gate pages were missed.
The fix is pretty simple, and is accompanied by a new test from Andy
which probably would have caught this earlier"
* emailed patches from Dave Hansen <dave.hansen@linux.intel.com>:
selftests/x86/test_vsyscall: Improve the process_vm_readv() test
mm: fix pin vs. gup mismatch with gate pages
Andy Lutomirski [Thu, 3 Sep 2020 20:40:30 +0000 (13:40 -0700)]
selftests/x86/test_vsyscall: Improve the process_vm_readv() test
The existing code accepted process_vm_readv() success or failure as long
as it didn't return garbage. This is too weak: if the vsyscall page is
readable, then process_vm_readv() should succeed and, if the page is not
readable, then it should fail.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Hansen [Thu, 3 Sep 2020 20:40:28 +0000 (13:40 -0700)]
mm: fix pin vs. gup mismatch with gate pages
Gate pages were missed when converting from get to pin_user_pages().
This can lead to refcount imbalances. This is reliably and quickly
reproducible running the x86 selftests when vsyscall=emulate is enabled
(the default). Fix by using try_grab_page() with appropriate flags
passed.
The long story:
Today, pin_user_pages() and get_user_pages() are similar interfaces for
manipulating page reference counts. However, "pins" use a "bias" value
and manipulate the actual reference count by 1024 instead of 1 used by
plain "gets".
That means that pin_user_pages() must be matched with unpin_user_pages()
and can't be mixed with a plain put_user_pages() or put_page().
Enter gate pages, like the vsyscall page. They are pages usually in the
kernel image, but which are mapped to userspace. Userspace is allowed
access to them, including interfaces using get/pin_user_pages(). The
refcount of these kernel pages is manipulated just like a normal user
page on the get/pin side so that the put/unpin side can work the same
for normal user pages or gate pages.
get_gate_page() uses try_get_page() which only bumps the refcount by
1, not 1024, even if called in the pin_user_pages() path. If someone
pins a gate page, this happens:
pin_user_pages()
get_gate_page()
try_get_page() // bump refcount +1
... some time later
unpin_user_pages()
page_ref_sub_and_test(page, 1024))
... and boom, we get a refcount off by 1023. This is reliably and
quickly reproducible running the x86 selftests when booted with
vsyscall=emulate (the default). The selftests use ptrace(), but I
suspect anything using pin_user_pages() on gate pages could hit this.
To fix it, simply use try_grab_page() instead of try_get_page(), and
pass 'gup_flags' in so that FOLL_PIN can be respected.
This bug traces back to the very beginning of the FOLL_PIN support in
commit
3faa52c03f44 ("mm/gup: track FOLL_PIN pages"), which showed up in
the 5.7 release.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: 3faa52c03f44 ("mm/gup: track FOLL_PIN pages")
Reported-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Airlie [Fri, 4 Sep 2020 01:14:24 +0000 (11:14 +1000)]
Merge branch 'linux-5.9' of git://github.com/skeggsb/linux into drm-fixes
A couple of minor fixes to the display changes that went in for 5.9.
The most important of which is a workaround for a HW bug that was
exposed by better push buffer space management, leading to
random(ish...) display engine hangs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/
Dave Airlie [Fri, 4 Sep 2020 01:00:47 +0000 (11:00 +1000)]
Merge tag 'drm-intel-fixes-2020-09-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.9-rc4:
- Clang build warning fix
- HDCP fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sgbz2pnx.fsf@intel.com
Dave Airlie [Fri, 4 Sep 2020 00:51:27 +0000 (10:51 +1000)]
Merge tag 'amd-drm-fixes-5.9-2020-09-03' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.9-2020-09-03:
amdgpu:
- Fix for 32bit systems
- SW CTF fix
- Update for Sienna Cichlid
- CIK bug fixes
radeon:
- PLL fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903050022.3960-1-alexander.deucher@amd.com
Christophe JAILLET [Thu, 3 Sep 2020 20:10:55 +0000 (22:10 +0200)]
smsc9420: switch from 'pci_' to 'dma_' API
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'smsc9420_probe()', GFP_KERNEL can be used
because it is a probe function and no lock is acquired.
While at it, rewrite the size passed to 'dma_alloc_coherent()' the same way
as the one passed to 'dma_free_coherent()'. This form is less verbose:
sizeof(struct smsc9420_dma_desc) * RX_RING_SIZE +
sizeof(struct smsc9420_dma_desc) * TX_RING_SIZE,
vs
sizeof(struct smsc9420_dma_desc) * (RX_RING_SIZE + TX_RING_SIZE)
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christophe JAILLET [Thu, 3 Sep 2020 20:05:09 +0000 (22:05 +0200)]
epic100: switch from 'pci_' to 'dma_' API
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'epic_init_one()', GFP_KERNEL can be used
because it is a probe function and no lock is acquired.
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Sep 2020 23:52:33 +0000 (16:52 -0700)]
Merge branch 'smc-fixes'
Karsten Graul says:
====================
net/smc: fixes 2020-09-03
Please apply the following patch series for smc to netdev's net tree.
Patch 1 fixes the toleration of older SMC implementations. Patch 2
takes care of a problem that happens when SMCR is used after SMCD
initialization failed. Patch 3 fixes a problem with freed send buffers,
and patch 4 corrects refcounting when SMC terminates due to device
removal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Thu, 3 Sep 2020 19:53:18 +0000 (21:53 +0200)]
net/smc: fix sock refcounting in case of termination
When an ISM device is removed, all its linkgroups are terminated,
i.e. all the corresponding connections are killed.
Connection killing invokes smc_close_active_abort(), which decreases
the sock refcount for certain states to simulate passive closing.
And it cancels the close worker and has to give up the sock lock for
this timeframe. This opens the door for a passive close worker or a
socket close to run in between. In this case smc_close_active_abort() and
passive close worker resp. smc_release() might do a sock_put for passive
closing. This causes:
[ 1323.315943] refcount_t: underflow; use-after-free.
[ 1323.316055] WARNING: CPU: 3 PID: 54469 at lib/refcount.c:28 refcount_warn_saturate+0xe8/0x130
[ 1323.316069] Kernel panic - not syncing: panic_on_warn set ...
[ 1323.316084] CPU: 3 PID: 54469 Comm: uperf Not tainted 5.9.0-
20200826.rc2.git0.
46328853ed20.300.fc32.s390x+debug #1
[ 1323.316096] Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0)
[ 1323.316108] Call Trace:
[ 1323.316125] [<
00000000c0d4aae8>] show_stack+0x90/0xf8
[ 1323.316143] [<
00000000c15989b0>] dump_stack+0xa8/0xe8
[ 1323.316158] [<
00000000c0d8344e>] panic+0x11e/0x288
[ 1323.316173] [<
00000000c0d83144>] __warn+0xac/0x158
[ 1323.316187] [<
00000000c1597a7a>] report_bug+0xb2/0x130
[ 1323.316201] [<
00000000c0d36424>] monitor_event_exception+0x44/0xc0
[ 1323.316219] [<
00000000c195c716>] pgm_check_handler+0x1da/0x238
[ 1323.316234] [<
00000000c151844c>] refcount_warn_saturate+0xec/0x130
[ 1323.316280] ([<
00000000c1518448>] refcount_warn_saturate+0xe8/0x130)
[ 1323.316310] [<
000003ff801f2e2a>] smc_release+0x192/0x1c8 [smc]
[ 1323.316323] [<
00000000c169f1fa>] __sock_release+0x5a/0xe0
[ 1323.316334] [<
00000000c169f2ac>] sock_close+0x2c/0x40
[ 1323.316350] [<
00000000c1086de0>] __fput+0xb8/0x278
[ 1323.316362] [<
00000000c0db1e0e>] task_work_run+0x76/0xb8
[ 1323.316393] [<
00000000c0d8ab84>] do_exit+0x26c/0x520
[ 1323.316408] [<
00000000c0d8af08>] do_group_exit+0x48/0xc0
[ 1323.316421] [<
00000000c0d8afa8>] __s390x_sys_exit_group+0x28/0x38
[ 1323.316433] [<
00000000c195c32c>] system_call+0xe0/0x2b4
[ 1323.316446] 1 lock held by uperf/54469:
[ 1323.316456] #0:
0000000044125e60 (&sb->s_type->i_mutex_key#9){+.+.}-{3:3}, at: __sock_release+0x44/0xe0
The patch rechecks sock state in smc_close_active_abort() after
smc_close_cancel_work() to avoid duplicate decrease of sock
refcount for the same purpose.
Fixes: 611b63a12732 ("net/smc: cancel tx worker in case of socket aborts")
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Thu, 3 Sep 2020 19:53:17 +0000 (21:53 +0200)]
net/smc: reset sndbuf_desc if freed
When an SMC connection is created, and there is a problem to
create an RMB or DMB, the previously created send buffer is
thrown away as well including buffer descriptor freeing.
Make sure the connection no longer references the freed
buffer descriptor, otherwise bugs like this are possible:
[71556.835148] =============================================================================
[71556.835168] BUG kmalloc-128 (Tainted: G B OE ): Poison overwritten
[71556.835172] -----------------------------------------------------------------------------
[71556.835179] INFO: 0x00000000d20894be-0x00000000aaef63e9 @offset=2724. First byte 0x0 instead of 0x6b
[71556.835215] INFO: Allocated in __smc_buf_create+0x184/0x578 [smc] age=0 cpu=5 pid=46726
[71556.835234] ___slab_alloc+0x5a4/0x690
[71556.835239] __slab_alloc.constprop.0+0x70/0xb0
[71556.835243] kmem_cache_alloc_trace+0x38e/0x3f8
[71556.835250] __smc_buf_create+0x184/0x578 [smc]
[71556.835257] smc_buf_create+0x2e/0xe8 [smc]
[71556.835264] smc_listen_work+0x516/0x6a0 [smc]
[71556.835275] process_one_work+0x280/0x478
[71556.835280] worker_thread+0x66/0x368
[71556.835287] kthread+0x17a/0x1a0
[71556.835294] ret_from_fork+0x28/0x2c
[71556.835301] INFO: Freed in smc_buf_create+0xd8/0xe8 [smc] age=0 cpu=5 pid=46726
[71556.835307] __slab_free+0x246/0x560
[71556.835311] kfree+0x398/0x3f8
[71556.835318] smc_buf_create+0xd8/0xe8 [smc]
[71556.835324] smc_listen_work+0x516/0x6a0 [smc]
[71556.835328] process_one_work+0x280/0x478
[71556.835332] worker_thread+0x66/0x368
[71556.835337] kthread+0x17a/0x1a0
[71556.835344] ret_from_fork+0x28/0x2c
[71556.835348] INFO: Slab 0x00000000a0744551 objects=51 used=51 fp=0x0000000000000000 flags=0x1ffff00000010200
[71556.835352] INFO: Object 0x00000000563480a1 @offset=2688 fp=0x00000000289567b2
[71556.835359] Redzone
000000006783cde2: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835363] Redzone
00000000e35b876e: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835367] Redzone
0000000023074562: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835372] Redzone
00000000b9564b8c: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835376] Redzone
00000000810c6362: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835380] Redzone
0000000065ef52c3: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835384] Redzone
00000000c5dd6984: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835388] Redzone
000000004c480f8f: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835392] Object
00000000563480a1: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[71556.835397] Object
000000009c479d06: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[71556.835401] Object
000000006e1dce92: 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b kkkk....kkkkkkkk
[71556.835405] Object
00000000227f7cf8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[71556.835410] Object
000000009a701215: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[71556.835414] Object
000000003731ce76: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[71556.835418] Object
00000000f7085967: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[71556.835422] Object
0000000007f99927: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk.
[71556.835427] Redzone
00000000579c4913: bb bb bb bb bb bb bb bb ........
[71556.835431] Padding
00000000305aef82: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
[71556.835435] Padding
00000000b1cdd722: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
[71556.835438] Padding
00000000c7568199: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
[71556.835442] Padding
00000000fad4c4d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
[71556.835451] CPU: 0 PID: 47939 Comm: kworker/0:15 Tainted: G B OE 5.9.0-rc1uschi+ #54
[71556.835456] Hardware name: IBM 3906 M03 703 (LPAR)
[71556.835464] Workqueue: events smc_listen_work [smc]
[71556.835470] Call Trace:
[71556.835478] [<
00000000d5eaeb10>] show_stack+0x90/0xf8
[71556.835493] [<
00000000d66fc0f8>] dump_stack+0xa8/0xe8
[71556.835499] [<
00000000d61a511c>] check_bytes_and_report+0x104/0x130
[71556.835504] [<
00000000d61a57b2>] check_object+0x26a/0x2e0
[71556.835509] [<
00000000d61a59bc>] alloc_debug_processing+0x194/0x238
[71556.835514] [<
00000000d61a8c14>] ___slab_alloc+0x5a4/0x690
[71556.835519] [<
00000000d61a9170>] __slab_alloc.constprop.0+0x70/0xb0
[71556.835524] [<
00000000d61aaf66>] kmem_cache_alloc_trace+0x38e/0x3f8
[71556.835530] [<
000003ff80549bbc>] __smc_buf_create+0x184/0x578 [smc]
[71556.835538] [<
000003ff8054a396>] smc_buf_create+0x2e/0xe8 [smc]
[71556.835545] [<
000003ff80540c16>] smc_listen_work+0x516/0x6a0 [smc]
[71556.835549] [<
00000000d5f0f448>] process_one_work+0x280/0x478
[71556.835554] [<
00000000d5f0f6a6>] worker_thread+0x66/0x368
[71556.835559] [<
00000000d5f18692>] kthread+0x17a/0x1a0
[71556.835563] [<
00000000d6abf3b8>] ret_from_fork+0x28/0x2c
[71556.835569] INFO: lockdep is turned off.
[71556.835573] FIX kmalloc-128: Restoring 0x00000000d20894be-0x00000000aaef63e9=0x6b
[71556.835577] FIX kmalloc-128: Marking all objects used
Fixes: fd7f3a746582 ("net/smc: remove freed buffer from list")
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Thu, 3 Sep 2020 19:53:16 +0000 (21:53 +0200)]
net/smc: set rx_off for SMCR explicitly
SMC tries to make use of SMCD first. If a problem shows up,
it tries to switch to SMCR. If the SMCD initializing problem shows
up after the SMCD connection has already been initialized, field
rx_off keeps the wrong SMCD value for SMCR, which results in corrupted
data at the receiver.
This patch adds an explicit (re-)setting of field rx_off to zero if the
connection uses SMCR.
Fixes: be244f28d22f ("net/smc: add SMC-D support in data transfer")
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Karsten Graul [Thu, 3 Sep 2020 19:53:15 +0000 (21:53 +0200)]
net/smc: fix toleration of fake add_link messages
Older SMCR implementations had no link failover support and used one
link only. Because the handshake protocol requires to try the
establishment of a second link the old code sent a fake add_link message
and declined any server response afterwards.
The current code supports multiple links and inspects the received fake
add_link message more closely. To tolerate the fake add_link messages
smc_llc_is_local_add_link() needs an improved check of the message to
be able to separate between locally enqueued and fake add_link messages.
And smc_llc_cli_add_link() needs to check if the provided qp_mtu size is
invalid and reject the add_link request in that case.
Fixes: c48254fa48e5 ("net/smc: move add link processing for new device into llc layer")
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Murphy [Thu, 3 Sep 2020 19:51:12 +0000 (14:51 -0500)]
net: phy: dp83867: Fix various styling and space issues
Fix spacing issues reported for misaligned switch..case and extra new
lines.
Also updated the file header to comply with networking commet style.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Tue, 1 Sep 2020 22:10:08 +0000 (15:10 -0700)]
ip: expose inet sockopts through inet_diag
Expose all exisiting inet sockopt bits through inet_diag for debug purpose.
Corresponding changes in iproute2 ss will be submitted to output all
these values.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Sep 2020 22:08:03 +0000 (15:08 -0700)]
Merge branch 'net-dsa-bcm_sf2-Clock-support'
Florian Fainelli says:
====================
net: dsa: bcm_sf2: Clock support
This patch series adds support for controlling the SF2 switch core and
divider clock (where applicable).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 1 Sep 2020 22:59:13 +0000 (15:59 -0700)]
net: dsa: bcm_sf2: recalculate switch clock rate based on ports
Whenever a port gets enabled/disabled, recalcultate the required switch
clock rate to make sure it always gets set to the expected rate
targeting our switch use case. This is only done for the BCM7445 switch
as there is no clocking profile available for BCM7278.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 1 Sep 2020 22:59:12 +0000 (15:59 -0700)]
net: dsa: bcm_sf2: request and handle clocks
Fetch the corresponding clock resource and enable/disable it during
suspend/resume if and only if we have no ports defined for Wake-on-LAN.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 1 Sep 2020 22:59:11 +0000 (15:59 -0700)]
dt-bindings: net: Document Broadcom SF2 switch clocks
Describe the two possible clocks feeding into the Broadcom SF2
integrated Ethernet switch. BCM7445 systems have two clocks, one for the
main switch core clock, and another for controlling the switch clock
divider whereas BCM7278 systems only have the first kind.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Sep 2020 22:06:03 +0000 (15:06 -0700)]
Merge branch 'net-systemport-Clock-support'
Florian Fainelli says:
====================
net: systemport: Clock support
This patch series makes the SYSTEMPORT driver request and manage its
main and Wake-on-LAN clocks appropriately.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 1 Sep 2020 21:43:48 +0000 (14:43 -0700)]
net: systemport: Manage Wake-on-LAN clock
It is necessary to manage the Wake-on-LAN clock to turn on the
appropriate blocks for MPD or CFP-based packet matching to work
otherwise we will not be able to reliably match packets during suspend.
Reported-by: Blair Prescott <blair.prescott@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 1 Sep 2020 21:43:47 +0000 (14:43 -0700)]
net: systemport: fetch and use clock resources
We disable clocks shortly after probing the device to save as much power as
possible in case the interface is never used. When bcm_sysport_open() is
invoked, clocks are enabled, and disabled in bcm_sysport_stop().
A similar scheme is applied to the suspend/resume functions.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 1 Sep 2020 21:43:46 +0000 (14:43 -0700)]
dt-bindings: net: Document Broadcom SYSTEMPORT clocks
The Broadcom SYSTEMPORT adapters require the use of two clocks for
normal operations and during Wake-on-LAN, document those in the binding
document.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Tue, 1 Sep 2020 17:52:32 +0000 (18:52 +0100)]
ethtool: fix error handling in ethtool_phys_id
If ops->set_phys_id() returned an error, previously we would only break
out of the inner loop, which neither stopped the outer loop nor returned
the error to the user (since 'rc' would be overwritten on the next pass
through the loop).
Thus, rewrite it to use a single loop, so that the break does the right
thing. Use u64 for 'count' and 'i' to prevent overflow in case of
(unreasonably) large values of id.data and n.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Po-Hsu Lin [Tue, 1 Sep 2020 15:09:23 +0000 (23:09 +0800)]
selftests/net: improve descriptions for XFAIL cases in psock_snd.sh
Before changing this it's a bit confusing to read test output:
raw csum_off with bad offset (fails)
./psock_snd: write: Invalid argument
Change "fails" in the test case description to "expected to fail", so
that the test output can be more understandable.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geert Uytterhoeven [Tue, 1 Sep 2020 14:58:41 +0000 (16:58 +0200)]
chelsio/chtls: CHELSIO_INLINE_CRYPTO should depend on CHELSIO_T4
While CHELSIO_INLINE_CRYPTO is a guard symbol, and just enabling it does
not cause any additional code to be compiled in, all configuration
options protected by it depend on CONFIG_CHELSIO_T4. Hence it doesn't
make much sense to bother the user with the guard symbol question when
CONFIG_CHELSIO_T4 is disabled.
Fix this by moving the dependency from the individual config options to
the guard symbol.
Fixes: 44fd1c1fd8219551 ("chelsio/chtls: separate chelsio tls driver from crypto driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Sep 2020 21:52:33 +0000 (14:52 -0700)]
Merge branch 'Convert-mvpp2-to-split-PCS-support'
Russell King says:
====================
Convert mvpp2 to split PCS support
This series converts the mvpp2 driver to use the split PCS support
that has been merged into phylink last time around. I've been running
this for some time here and, apart from the recent bug fix sent to
net-next, have not seen any issues on DT based systems. I have not
tested ACPI setups, although I've tried to preserve the workaround.
Patch 1 formalises the ACPI workaround.
Patch 2 moves some of mac_config() to the mac_prepare() and
mac_finish() callbacks so we can keep the ordering when we split
the PCS bits out.
Patch 3 ensures that the port is forced down while changing the
interface mode - when in in-band mode, doing this in mac_prepare()
and mac_finish().
Patch 4 moves the reset handling to mac_prepare() and mac_finish()
Patch 5 does a straight conversion to use PCS operations.
Patch 6 splits the PCS operations into a GMAC PCS operations and
XLG PCS operations, selecting the appropriate set during
mac_prepare(). This eliminates a bunch of conditionals from the
code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 1 Sep 2020 13:48:37 +0000 (14:48 +0100)]
net: mvpp2: split xlg and gmac pcs
Split the XLG and GMAC PCS implementations and switch between them
during the mac_prepare() method.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 1 Sep 2020 13:48:32 +0000 (14:48 +0100)]
net: mvpp2: convert to phylink pcs operations
Convert mvpp2 to phylink's new pcs support.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 1 Sep 2020 13:48:27 +0000 (14:48 +0100)]
net: mvpp2: move GMAC reset handling into mac_prepare()/mac_finish()
Move the GMAC reset handling into mac_prepare() / mac_finish()
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 1 Sep 2020 13:48:22 +0000 (14:48 +0100)]
net: mvpp2: ensure the port is forced down while changing modes
Ensure that the port is forced down while reconfiguring, controlling
this via mac_prepare() and mac_finish() so that it is down while we
are configuring our (future) PCS.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 1 Sep 2020 13:48:17 +0000 (14:48 +0100)]
net: mvpp2: convert to use mac_prepare()/mac_finish()
Convert mvpp2 to use the mac_prepare() and mac_finish() methods in
preparation to converting mvpp2 to split-PCS support.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 1 Sep 2020 13:48:12 +0000 (14:48 +0100)]
net: mvpp2: tidy up ACPI hack
Tidy up the ACPI hack so that we can minimise the function prototypes
for this. This avoids adding further prototypes unnecessarily.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Sep 2020 19:19:04 +0000 (12:19 -0700)]
Merge branch 'l2tp-miscellaneous-cleanups'
Tom Parkin says:
====================
l2tp: miscellaneous cleanups
This series of patches makes the following cleanups and improvements to
the l2tp code:
* various API tweaks to remove unused parameters from function calls
* lightly refactor the l2tp transmission path to capture more error
conditions in the data plane statistics
* repurpose the "magic feather" validation in l2tp to check for
sk_user_data (ab)use as opposed to refcount debugging
* remove some duplicated code
====================
Reviewed-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Parkin [Thu, 3 Sep 2020 08:54:52 +0000 (09:54 +0100)]
l2tp: avoid duplicated code in l2tp_tunnel_closeall
l2tp_tunnel_closeall is called as a part of tunnel shutdown in order to
close all the sessions held by the tunnel. The code it uses to close a
session duplicates what l2tp_session_delete does.
Rather than duplicating the code, have l2tp_tunnel_closeall call
l2tp_session_delete instead.
This involves a very minor change to locking in l2tp_tunnel_closeall.
Previously, l2tp_tunnel_closeall checked the session "dead" flag while
holding tunnel->hlist_lock. This allowed for the code to step to the
next session in the list without releasing the lock if the current
session happened to be in the process of closing already.
By calling l2tp_session_delete instead, l2tp_tunnel_closeall must now
drop and regain the hlist lock for each session in the tunnel list.
Given that the likelihood of a session being in the process of closing
when the tunnel is closed, it seems worth this very minor potential
loss of efficiency to avoid duplication of the session delete code.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Parkin [Thu, 3 Sep 2020 08:54:51 +0000 (09:54 +0100)]
l2tp: make magic feather checks more useful
The l2tp tunnel and session structures contain a "magic feather" field
which was originally intended to help trace lifetime bugs in the code.
Since the introduction of the shared kernel refcount code in refcount.h,
and l2tp's porting to those APIs, we are covered by the refcount code's
checks and warnings. Duplicating those checks in the l2tp code isn't
useful.
However, magic feather checks are still useful to help to detect bugs
stemming from misuse/trampling of the sk_user_data pointer in struct
sock. The l2tp code makes extensive use of sk_user_data to stash
pointers to the tunnel and session structures, and if another subsystem
overwrites sk_user_data it's important to detect this.
As such, rework l2tp's magic feather checks to focus on validating the
tunnel and session data structures when they're extracted from
sk_user_data.
* Add a new accessor function l2tp_sk_to_tunnel which contains a magic
feather check, and is used by l2tp_core and l2tp_ip[6]
* Comment l2tp_udp_encap_recv which doesn't use this new accessor function
because of the specific nature of the codepath it is called in
* Drop l2tp_session_queue_purge's check on the session magic feather:
it is called from code which is walking the tunnel session list, and
hence doesn't need validation
* Drop l2tp_session_free's check on the tunnel magic feather: the
intention of this check is covered by refcount.h's reference count
sanity checking
* Add session magic validation in pppol2tp_ioctl. On failure return
-EBADF, which mirrors the approach in pppol2tp_[sg]etsockopt.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Parkin [Thu, 3 Sep 2020 08:54:50 +0000 (09:54 +0100)]
l2tp: capture more tx errors in data plane stats
l2tp_xmit_skb has a number of failure paths which are not reflected in
the tunnel and session statistics because the stats are updated by
l2tp_xmit_core. Hence any errors occurring before l2tp_xmit_core is
called are missed from the statistics.
Refactor the transmit path slightly to capture all error paths.
l2tp_xmit_skb now leaves all the actual work of transmission to
l2tp_xmit_core, and updates the statistics based on l2tp_xmit_core's
return code.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Parkin [Thu, 3 Sep 2020 08:54:49 +0000 (09:54 +0100)]
l2tp: drop net argument from l2tp_tunnel_create
The argument is unused, so remove it.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Parkin [Thu, 3 Sep 2020 08:54:48 +0000 (09:54 +0100)]
l2tp: drop data_len argument from l2tp_xmit_core
The data_len argument passed to l2tp_xmit_core is no longer used, so
remove it.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Parkin [Thu, 3 Sep 2020 08:54:47 +0000 (09:54 +0100)]
l2tp: remove header length param from l2tp_xmit_skb
All callers pass the session structure's hdr_len field as the header
length parameter to l2tp_xmit_skb.
Since we're passing a pointer to the session structure to l2tp_xmit_skb
anyway, there's not much point breaking the header length out as a
separate argument.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Thu, 3 Sep 2020 18:28:54 +0000 (14:28 -0400)]
tg3: Fix soft lockup when tg3_reset_task() fails.
If tg3_reset_task() fails, the device state is left in an inconsistent
state with IFF_RUNNING still set but NAPI state not enabled. A
subsequent operation, such as ifdown or AER error can cause it to
soft lock up when it tries to disable NAPI state.
Fix it by bringing down the device to !IFF_RUNNING state when
tg3_reset_task() fails. tg3_reset_task() running from workqueue
will now call tg3_close() when the reset fails. We need to
modify tg3_reset_task_cancel() slightly to avoid tg3_close()
calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise
cancel_work_sync() will wait forever for tg3_reset_task() to
finish.
Reported-by: David Christensen <drc@linux.vnet.ibm.com>
Reported-by: Baptiste Covolato <baptiste@arista.com>
Fixes: db2199737990 ("tg3: Schedule at most one tg3_reset_task run")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Sep 2020 19:12:05 +0000 (12:12 -0700)]
Merge branch 'mlxsw-Expose-critical-and-emergency-module-alarms'
Ido Schimmel says:
====================
mlxsw: Expose critical and emergency module alarms
Amit says:
Extend hwmon interface with critical and emergency module alarms.
In case that current module temperature is higher than emergency
threshold, EMERGENCY alarm will be reported in sensors utility:
$ sensors
...
front panel 025: +55.0°C (crit = +35.0°C, emerg = +40.0°C) ALARM(EMERGENCY)
In case that current module temperature is higher than critical
threshold, CRIT alarm will be reported in sensors utility:
$ sensors
...
front panel 025: +54.0°C (crit = +35.0°C, emerg = +80.0°C) ALARM(CRIT)
Patch set overview:
Patches #1-#2 make several changes to make the code easier to change.
Patch #3 extends the hwmon interface with the new module alarms.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 3 Sep 2020 13:41:46 +0000 (16:41 +0300)]
mlxsw: core_hwmon: Extend hwmon interface with critical and emergency alarms
Add new attributes to hwmon object for exposing critical and emergency
alarms.
In case that current temperature is higher than emergency threshold,
EMERGENCY alarm will be reported in sensors utility:
$ sensors
...
front panel 025: +55.0°C (crit = +35.0°C, emerg = +40.0°C) ALARM(EMERGENCY)
In case that current temperature is higher than critical threshold,
CRIT alarm will be reported in sensors utility:
$ sensors
...
front panel 025: +54.0°C (crit = +35.0°C, emerg = +80.0°C) ALARM(CRIT)
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Acked-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 3 Sep 2020 13:41:45 +0000 (16:41 +0300)]
mlxsw: core_hwmon: Calculate MLXSW_HWMON_ATTR_COUNT more accurately
Currently the value of MLXSW_HWMON_ATTR_COUNT is calculated not really
accurate.
Add several defines to make the calculation clearer and easier to
change.
Calculate the precise high bound of number of attributes that may be
needed.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 3 Sep 2020 13:41:44 +0000 (16:41 +0300)]
mlxsw: core_hwmon: Split temperature querying from show functions
mlxsw_hwmon_module_temp_show(), mlxsw_hwmon_module_temp_critical_show()
and mlxsw_hwmon_module_temp_emergency_show() query the relevant
temperature from firmware and fill the value in provided buffers.
Split the temperature querying functionality to individual get()
functions and call them from the show() functions.
The get() functions will be used by subsequent patches in the set.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Sep 2020 19:07:29 +0000 (12:07 -0700)]
Merge branch 'Minor-improvements-to-b53-dmesg-output'
Paul Barker says:
====================
Minor improvements to b53 dmesg output
These changes were made while debugging the b53 driver for use on a
custom board. They've been runtime tested on a patched 4.14.y kernel
which supports this board as well as build tested with 5.9-rc3. The
changes are straightforward enough that I think this testing is
sufficient but let me know if further testing is required.
Unfortunately I don't have a board to hand which boots with a more
recent kernel and has a switch supported by the b53 driver. I'd still
like to upstream these patches if possible though.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Barker [Thu, 3 Sep 2020 11:26:21 +0000 (12:26 +0100)]
net: dsa: b53: Print err message on SW_RST timeout
This allows us to differentiate between the possible failure modes of
b53_switch_reset() by looking at the dmesg output.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Barker [Thu, 3 Sep 2020 11:26:20 +0000 (12:26 +0100)]
net: dsa: b53: Use dev_{err,info} instead of pr_*
This change allows us to see which device the err or info messages are
referring to if we have multiple b53 compatible devices on a board.
As this removes the only pr_*() calls in this file we can drop the
definition of pr_fmt().
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Olsa [Wed, 26 Aug 2020 21:30:17 +0000 (23:30 +0200)]
perf tools: Add bpf image check to __map__is_kmodule
When validating kcore modules the do_validate_kcore_modules function
checks on every kernel module dso against modules record. The
__map__is_kmodule check is used to get only kernel module dso objects
through.
Currently the bpf images are slipping through the check and making the
validation to fail, so report falls back from kcore usage to kallsyms.
Adding __map__is_bpf_image check for bpf image and adding it to
__map__is_kmodule check.
Fixes: 3c29d4483e85 ("perf annotate: Add basic support for bpf_image")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200826213017.818788-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kim Phillips [Tue, 1 Sep 2020 21:58:53 +0000 (16:58 -0500)]
perf record/stat: Explicitly call out event modifiers in the documentation
Event modifiers are not mentioned in the perf record or perf stat
manpages. Add them to orient new users more effectively by pointing
them to the perf list manpage for details.
Fixes: 2055fdaf8703 ("perf list: Document precise event sampling for AMD IBS")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tony Jones <tonyj@suse.de>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200901215853.276234-1-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
YueHaibing [Wed, 2 Sep 2020 14:05:26 +0000 (22:05 +0800)]
perf bench: The do_run_multi_threaded() function must use IS_ERR(perf_session__new())
In case of error, the function perf_session__new() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR()
Committer notes:
This wasn't compiling due to an extraneous '{' not matched by a '}', fix
it.
Fixes: 13edc237200c ("perf bench: Add a multi-threaded synthesize benchmark")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200902140526.26916-1-yuehaibing@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Thu, 3 Sep 2020 01:01:13 +0000 (09:01 +0800)]
perf stat: Turn off summary for interval mode by default
There's a risk that outputting interval mode summaries by default breaks
CSV consumers. It already broke pmu-tools/toplev.
So now we turn off the summary by default but we create a new option
'--summary' to enable the summary. This is active even when not using
CSV mode.
Before:
root@kbl-ppc:~# perf stat -I1000 --interval-count 2
# time counts unit events
1.
000265904 8,005.73 msec cpu-clock # 8.006 CPUs utilized
1.
000265904 601 context-switches # 0.075 K/sec
1.
000265904 10 cpu-migrations # 0.001 K/sec
1.
000265904 0 page-faults # 0.000 K/sec
1.
000265904 66,746,521 cycles # 0.008 GHz
1.
000265904 71,874,398 instructions # 1.08 insn per cycle
1.
000265904 13,356,781 branches # 1.668 M/sec
1.
000265904 298,756 branch-misses # 2.24% of all branches
2.
001857667 8,012.52 msec cpu-clock # 8.013 CPUs utilized
2.
001857667 164 context-switches # 0.020 K/sec
2.
001857667 10 cpu-migrations # 0.001 K/sec
2.
001857667 2 page-faults # 0.000 K/sec
2.
001857667 5,822,188 cycles # 0.001 GHz
2.
001857667 2,186,170 instructions # 0.38 insn per cycle
2.
001857667 442,378 branches # 0.055 M/sec
2.
001857667 44,750 branch-misses # 10.12% of all branches
Performance counter stats for 'system wide':
16,018.25 msec cpu-clock # 7.993 CPUs utilized
765 context-switches # 0.048 K/sec
20 cpu-migrations # 0.001 K/sec
2 page-faults # 0.000 K/sec
72,568,709 cycles # 0.005 GHz
74,060,568 instructions # 1.02 insn per cycle
13,799,159 branches # 0.861 M/sec
343,506 branch-misses # 2.49% of all branches
2.
004118489 seconds time elapsed
After:
root@kbl-ppc:~# perf stat -I1000 --interval-count 2
# time counts unit events
1.
001336393 8,013.28 msec cpu-clock # 8.013 CPUs utilized
1.
001336393 82 context-switches # 0.010 K/sec
1.
001336393 8 cpu-migrations # 0.001 K/sec
1.
001336393 0 page-faults # 0.000 K/sec
1.
001336393 4,199,121 cycles # 0.001 GHz
1.
001336393 1,373,991 instructions # 0.33 insn per cycle
1.
001336393 270,681 branches # 0.034 M/sec
1.
001336393 31,659 branch-misses # 11.70% of all branches
2.
003905006 8,020.52 msec cpu-clock # 8.021 CPUs utilized
2.
003905006 184 context-switches # 0.023 K/sec
2.
003905006 8 cpu-migrations # 0.001 K/sec
2.
003905006 2 page-faults # 0.000 K/sec
2.
003905006 5,446,190 cycles # 0.001 GHz
2.
003905006 2,312,547 instructions # 0.42 insn per cycle
2.
003905006 451,691 branches # 0.056 M/sec
2.
003905006 37,925 branch-misses # 8.40% of all branches
root@kbl-ppc:~# perf stat -I1000 --interval-count 2 --summary
# time counts unit events
1.
001313128 8,013.20 msec cpu-clock # 8.013 CPUs utilized
1.
001313128 83 context-switches # 0.010 K/sec
1.
001313128 8 cpu-migrations # 0.001 K/sec
1.
001313128 0 page-faults # 0.000 K/sec
1.
001313128 4,470,950 cycles # 0.001 GHz
1.
001313128 1,440,045 instructions # 0.32 insn per cycle
1.
001313128 283,222 branches # 0.035 M/sec
1.
001313128 33,576 branch-misses # 11.86% of all branches
2.
003857385 8,020.34 msec cpu-clock # 8.020 CPUs utilized
2.
003857385 154 context-switches # 0.019 K/sec
2.
003857385 8 cpu-migrations # 0.001 K/sec
2.
003857385 2 page-faults # 0.000 K/sec
2.
003857385 4,515,676 cycles # 0.001 GHz
2.
003857385 2,180,449 instructions # 0.48 insn per cycle
2.
003857385 435,254 branches # 0.054 M/sec
2.
003857385 31,179 branch-misses # 7.16% of all branches
Performance counter stats for 'system wide':
16,033.53 msec cpu-clock # 7.992 CPUs utilized
237 context-switches # 0.015 K/sec
16 cpu-migrations # 0.001 K/sec
2 page-faults # 0.000 K/sec
8,986,626 cycles # 0.001 GHz
3,620,494 instructions # 0.40 insn per cycle
718,476 branches # 0.045 M/sec
64,755 branch-misses # 9.01% of all branches
2.
006124542 seconds time elapsed
Fixes: c7e5b328a8d4 ("perf stat: Report summary for interval mode")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200903010113.32232-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tzvetomir Stoyanov (VMware) [Wed, 2 Sep 2020 10:31:21 +0000 (13:31 +0300)]
libtraceevent: Fix build warning on 32-bit arches
Fixed a compilation warning for casting to pointer from integer of
different size on 32-bit platforms.
Reported-by: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 3 Sep 2020 15:25:10 +0000 (00:25 +0900)]
perf jevents: Fix suspicious code in fixregex()
The new string should have enough space for the original string and the
back slashes IMHO.
Fixes: fbc2844e84038ce3 ("perf vendor events: Use more flexible pattern matching for CPU identification for mapfile.csv")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lore.kernel.org/lkml/20200903152510.489233-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 3 Sep 2020 18:34:20 +0000 (15:34 -0300)]
perf parse-events: Use uintptr_t when casting numbers to pointers
To address these errors found when cross building from x86_64 to MIPS
little endian 32-bit:
CC /tmp/build/perf/util/parse-events-bison.o
util/parse-events.y: In function 'parse_events_parse':
util/parse-events.y:514:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
514 | (void *) $2, $6, $4);
| ^
util/parse-events.y:531:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
531 | (void *) $2, NULL, $4)) {
| ^
util/parse-events.y:547:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
547 | (void *) $2, $4, 0);
| ^
util/parse-events.y:564:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
564 | (void *) $2, NULL, 0)) {
| ^
Fixes: cabbf26821aa210f ("perf parse: Before yyabort-ing free components")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Paul Barker [Thu, 3 Sep 2020 08:49:25 +0000 (09:49 +0100)]
doc: net: dsa: Fix typo in config code sample
In the "single port" example code for configuring a DSA switch without
tagging support from userspace the command to bring up the "lan2" link
was typo'd.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 3 Sep 2020 17:05:48 +0000 (10:05 -0700)]
Merge tag 'fixes-2020-09-03' of git://git./linux/kernel/git/rppt/memblock
Pull misc build failure fixes from Mike Rapoport:
"Fix min_low_pfn/max_low_pfn build errors on ia64 and microblaze.
Some configurations of ia64 and microblaze use min_low_pfn and
max_low_pfn in pfn_valid(). This causes build failures for modules
that use pfn_valid().
The fix is to add EXPORT_SYMBOL() for these variables on ia64 and
microblaze"
* tag 'fixes-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
ia64: fix min_low_pfn/max_low_pfn build errors
microblaze: fix min_low_pfn/max_low_pfn build errors
Linus Torvalds [Thu, 3 Sep 2020 15:41:36 +0000 (08:41 -0700)]
Merge tag 'affs-for-5.9-tag' of git://git./linux/kernel/git/kdave/linux
Pull affs fix from David Sterba:
"One fix to make permissions work the same way as on AmigaOS"
* tag 'affs-for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
affs: fix basic permission bits to actually work
Linus Torvalds [Thu, 3 Sep 2020 15:22:16 +0000 (08:22 -0700)]
Merge tag 'media/v5.9-2' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- a compilation fix issue with ti-vpe on arm 32 bits
- two Kconfig fixes for imx214 and max9286 drivers
- a kernel information leak at v4l2-core on time32 compat ioctls
- some fixes at rc core unbind logic
- a fix at mceusb driver for it to not use GFP_ATOMIC
- fixes at cedrus and vicodec drivers at the control handling logic
- a fix at gpio-ir-tx to avoid disabling interruts on a spinlock
* tag 'media/v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: mceusb: Avoid GFP_ATOMIC where it is not needed
media: gpio-ir-tx: spinlock is not needed to disable interrupts
media: rc: do not access device via sysfs after rc_unregister_device()
media: rc: uevent sysfs file races with rc_unregister_device()
media: max9286: Depend on OF_GPIO
media: i2c: imx214: select V4L2_FWNODE
media: cedrus: Add missing v4l2_ctrl_request_hdl_put()
media: vicodec: add missing v4l2_ctrl_request_hdl_put()
media: media/v4l2-core: Fix kernel-infoleak in video_put_user()
media: ti-vpe: cal: Fix compilation on 32-bit ARM
Takashi Iwai [Thu, 3 Sep 2020 08:33:00 +0000 (10:33 +0200)]
ALSA: hda/realtek - Improved routing for Thinkpad X1 7th/8th Gen
There've been quite a few regression reports about the lowered volume
(reduced to ca 65% from the previous level) on Lenovo Thinkpad X1
after the commit
d2cd795c4ece ("ALSA: hda - fixup for the bass speaker
on Lenovo Carbon X1 7th gen"). Although the commit itself does the
right thing from HD-audio POV in order to have a volume control for
bass speakers, it seems that the machine has some secret recipe under
the hood.
Through experiments, Benjamin Poirier found out that the following
routing gives the best result:
* DAC1 (NID 0x02) -> Speaker pin (NID 0x14)
* DAC2 (NID 0x03) -> Shared by both Bass Speaker pin (NID 0x17) &
Headphone pin (0x21)
* DAC3 (NID 0x06) -> Unused
DAC1 seems to have some equalizer internally applied, and you'd get
again the output in a bad quality if you connect this to the
headphone pin. Hence the headphone is connected to DAC2, which is now
shared with the bass speaker pin. DAC3 has no volume amp, hence it's
not connected at all.
For achieving the routing above, this patch introduced a couple of
workarounds:
* The connection list of bass speaker pin (NID 0x17) is reduced not to
include DAC3 (NID 0x06)
* Pass preferred_pairs array to specify the fixed connection
Here, both workarounds are needed because the generic parser prefers
the individual DAC assignment over others.
When the routing above is applied, the generic parser creates the two
volume controls "Front" and "Bass Speaker". Since we have only two
DACs for three output pins, those are not fully controlling each
output individually, and it would confuse PulseAudio. For avoiding
the pitfall, in this patch, we rename those volume controls to some
unique ones ("DAC1" and "DAC2"). Then PulseAudio ignore them and
concentrate only on the still good-working "Master" volume control.
If a user still wants to control each DAC volume, they can still
change manually via "DAC1" and "DAC2" volume controls.
Fixes: d2cd795c4ece ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen")
Reported-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207407#c10
BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3214171
BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3276276
Link: https://lore/kernel.org/r/20200829112746.3118-1-benjamin.poirier@gmail.com
Link: https://lore.kernel.org/r/20200903083300.6333-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
projects / platform / kernel / linux-rpi.git / log