Thibault Saunier [Tue, 20 Jan 2015 08:59:23 +0000 (09:59 +0100)]
validate:launcher:baseclasses: Avoid raising axception when all getting scenarios
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Tue, 13 Jan 2015 18:07:04 +0000 (19:07 +0100)]
launcher: Use gst-integration-testsuites FDO git repo
And make sure that people that were using the old repo get the origin
repo properly updated.
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Wed, 4 Feb 2015 14:27:37 +0000 (15:27 +0100)]
validate: launcher: Allow discovering scenario from full path
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Wed, 4 Feb 2015 14:25:50 +0000 (15:25 +0100)]
validate: scenario: Add a method to get the following action to be executed
API:
+ gst_validate_scenario_get_next_action
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Wed, 4 Feb 2015 14:24:35 +0000 (15:24 +0100)]
validate: Add helper functions ti print actions
API:
+ gst_validate_scenario_get_next_action
+ gst_validate_reporter_report_simple
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Wed, 4 Feb 2015 14:23:29 +0000 (15:23 +0100)]
validate: Minor documentation fixes
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Wed, 4 Feb 2015 14:18:22 +0000 (15:18 +0100)]
validate: Set seek_with_stop as needing at least 2secs media files
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Sat, 13 Dec 2014 22:23:11 +0000 (23:23 +0100)]
validate: Fix the check of action that can be *not* executed
The check was wrong and we ended up allowing seek actions to no be
executed.
API:
GST_VALIDATE_ACTION_TYPE_NO_EXECUTION_NOT_FATAL
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Sat, 13 Dec 2014 22:16:27 +0000 (23:16 +0100)]
validate:scenario; Advertise action types that will be executed on addition
Adding a flag to the action type
And make that code thread safe.
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Sat, 13 Dec 2014 22:12:30 +0000 (23:12 +0100)]
validate:scenario: Add a Flag fore ActionType that need clocks sync
And cleanly use it to set the need-clock-sync field in
the scenario properties
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Sat, 13 Dec 2014 18:17:45 +0000 (19:17 +0100)]
validate: Add the notion of INTERLACED actions
An interlaced action is an action that will be executed ASYNC but
without that will not block following actions during its execution.
The action should be set to done later on at any point during the
execution of the scenario.
API:
+ GST_VALIDATE_EXECUTE_ACTION_INTERLACED
+ GST_VALIDATE_ACTION_TYPE_INTERLACED
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Sat, 13 Dec 2014 18:15:59 +0000 (19:15 +0100)]
validate: Add a way to retrieve register actoin type from outside
API:
* GstValidateActionType
* gst_validate_get_action_type
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Sat, 13 Dec 2014 15:01:49 +0000 (16:01 +0100)]
validate:launcher: Implement a FakeMediaDescriptor
This allows us to more cleanly implement Simple pipeline test
generation
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Sat, 13 Dec 2014 15:00:19 +0000 (16:00 +0100)]
validate:scenario: Make action->scenario public API
It can be usefull for action type implementers
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Sat, 13 Dec 2014 15:00:12 +0000 (16:00 +0100)]
validate:scenario: Add a disable-plugin action type
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Fri, 12 Dec 2014 13:41:38 +0000 (14:41 +0100)]
validate: Properly advertise the wait action as ASYNC
And add some printing when executing the set-property action
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Fri, 12 Dec 2014 13:36:16 +0000 (14:36 +0100)]
validate: Enhance support for simple pipeline test generation
The GstValidatePipelineGenerator was quite limited in term
of configuration for user who just want to specify pipelines
to run with/without scenario.
Enhance the API so that we can properly configure that.
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Thu, 11 Dec 2014 13:21:12 +0000 (14:21 +0100)]
validate: Wait for switch-track to complete before executing next action
This action type can take some time, we need to make sure that the
combiner/input-selector element properly pushed a buffer marked
as DISCONT to concider the action is done.
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Thu, 11 Dec 2014 11:08:13 +0000 (12:08 +0100)]
validate:scenario: Avoid waiting for 50ms between actions
We should be able to execute the next action as soon as the previous
one is fully completed, make sure the code tries to do that and does
not artificially add some waiting time.
And make sure if the gst_validate_action_set_done is called from outside
our execution thread, we do not try to execute anything
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Thibault Saunier [Wed, 10 Dec 2014 19:37:58 +0000 (20:37 +0100)]
scenario: Add a signal to notify user when the scenario is DONE executing
https://bugzilla.gnome.org/show_bug.cgi?id=743994
Ramiro Polla [Tue, 20 Jan 2015 15:44:07 +0000 (16:44 +0100)]
validate: launcher: Print test name in Result
https://bugzilla.gnome.org/show_bug.cgi?id=743063
Ramiro Polla [Fri, 16 Jan 2015 20:29:55 +0000 (21:29 +0100)]
validate: launcher: Add option to run tests in parallel
Patch 4/4 to implement parallel test execution.
https://bugzilla.gnome.org/show_bug.cgi?id=743063
Ramiro Polla [Fri, 16 Jan 2015 20:09:37 +0000 (21:09 +0100)]
validate: launcher: Print test number on result
With parallel test execution, it will be hard to track which result
relates to which test. Therefore, the test number should be printed
along with the results as well.
Patch 3/4 to implement parallel test execution.
https://bugzilla.gnome.org/show_bug.cgi?id=743063
Ramiro Polla [Fri, 16 Jan 2015 20:08:54 +0000 (21:08 +0100)]
validate: launcher: Use jobs list to take track of tests running
Currently the tests are still run serially.
Patch 2/4 to implement parallel test execution.
https://bugzilla.gnome.org/show_bug.cgi?id=743063
Ramiro Polla [Fri, 16 Jan 2015 19:35:33 +0000 (20:35 +0100)]
validate: launcher: Use test index instead of counting test numbers
Patch 1/4 to implement parallel test execution.
https://bugzilla.gnome.org/show_bug.cgi?id=743063
Ramiro Polla [Mon, 19 Jan 2015 09:35:03 +0000 (10:35 +0100)]
validate: launcher: Support simultaneous requests in RangeHTTPServer
https://bugzilla.gnome.org/show_bug.cgi?id=743063
Ramiro Polla [Fri, 16 Jan 2015 18:08:19 +0000 (19:08 +0100)]
validate: launcher: Make TestManager handle waiting for processes
Patch 4/4 to make TestManager handle waiting for processes instead of
expecting each Test to do it.
https://bugzilla.gnome.org/show_bug.cgi?id=743063
Ramiro Polla [Fri, 16 Jan 2015 18:03:07 +0000 (19:03 +0100)]
validate: launcher: Use a Queue to test for test completion
TestManager will use a Queue to track progress for all tests. This
commit implements a queue inside Test to simplify the transition.
Patch 3/4 to make TestManager handle waiting for processes instead of
expecting each Test to do it.
https://bugzilla.gnome.org/show_bug.cgi?id=743063
Ramiro Polla [Fri, 16 Jan 2015 18:00:25 +0000 (19:00 +0100)]
validate: launcher: Initialize Test start time outside of wait_process
wait_process will be moved to TestManager, so the values used to track
process update must remain inside Test.
Patch 2/4 to make TestManager handle waiting for processes instead of
expecting each Test to do it.
Ramiro Polla [Fri, 16 Jan 2015 17:57:06 +0000 (18:57 +0100)]
validate: launcher: Split process_update() out of wait_process()
Patch 1/4 to make TestManager handle waiting for processes instead of
expecting each Test to do it.
Ramiro Polla [Fri, 16 Jan 2015 17:50:38 +0000 (18:50 +0100)]
validate: launcher: Move logfile handling out of Reporter and into Test
This makes each Test handle its own logfile, allowing the Reporter to
work on multiple tests at the same time.
Patch 5/5 to move logfile handling out of Reporter and into Test.
Ramiro Polla [Fri, 16 Jan 2015 18:54:56 +0000 (19:54 +0100)]
validate: launcher: Remove redundant check
self.out is always available when _get_captured() is called.
Patch 4/5 to move logfile handling out of Reporter and into Test.
Ramiro Polla [Fri, 16 Jan 2015 17:45:52 +0000 (18:45 +0100)]
validate: launcher: Split test log file handling in Reporter
Patch 3/5 to move logfile handling out of Reporter and into Test.
Ramiro Polla [Fri, 16 Jan 2015 17:42:19 +0000 (18:42 +0100)]
validate: launcher: Separate Reporter from current Test
Instead of saving the current Test in Reporter for every test, use
function parameters to achieve the same goal.
Patch 2/5 to move logfile handling out of Reporter and into Test.
Ramiro Polla [Fri, 16 Jan 2015 17:25:56 +0000 (18:25 +0100)]
validate: launcher: Initialize reporter timer before starting all tests
Patch 1/5 to move logfile handling out of Reporter and into Test.
Ramiro Polla [Mon, 12 Jan 2015 12:09:33 +0000 (13:09 +0100)]
validate: launcher: Don't wait for processes longer than necessary
Mathieu Duponchelle [Tue, 3 Feb 2015 15:48:49 +0000 (16:48 +0100)]
socket interposer: Be even more platform restrictive.
Mathieu Duponchelle [Tue, 3 Feb 2015 14:41:01 +0000 (15:41 +0100)]
validate: do not compile for android.
Mathieu Duponchelle [Fri, 30 Jan 2015 17:52:57 +0000 (18:52 +0100)]
validate: Implement a fault injection library.
+ And implement a corrupt-socket-recv action
+ Only compile this on Linux, LD_PRELOAD won't work on Windows.
For now the registering of the action is done through
a call to socket_interposer_init, this will get better
when we refactor the action logic.
https://bugzilla.gnome.org/show_bug.cgi?id=743871
Mathieu Duponchelle [Fri, 23 Jan 2015 01:04:47 +0000 (02:04 +0100)]
validate: tests more issues with caps.
https://bugzilla.gnome.org/show_bug.cgi?id=743387
Mathieu Duponchelle [Fri, 23 Jan 2015 00:40:59 +0000 (01:40 +0100)]
validate: Add a test case for caps missing field.
+ Make the fake decoder have video/x-raw caps.
https://bugzilla.gnome.org/show_bug.cgi?id=743387
Mathieu Duponchelle [Thu, 22 Jan 2015 21:29:10 +0000 (22:29 +0100)]
validate: prepare tests for port to tracers backend.
https://bugzilla.gnome.org/show_bug.cgi?id=743387
Mathieu Duponchelle [Thu, 22 Jan 2015 21:07:37 +0000 (22:07 +0100)]
bin-monitor: add itself as gobject data.
Ramiro Polla [Tue, 13 Jan 2015 01:32:16 +0000 (02:32 +0100)]
validate: launcher: Fix test log header output
Write log file header before running tests, instead of overwriting the
file afterwards.
https://bugzilla.gnome.org/show_bug.cgi?id=742966
Ramiro Polla [Thu, 15 Jan 2015 14:32:12 +0000 (15:32 +0100)]
validate: launcher: Always create log files
Create log files even when stdout redirection is enabled.
This commit partially reverts 20c28de.
https://bugzilla.gnome.org/show_bug.cgi?id=742973
Ramiro Polla [Thu, 15 Jan 2015 14:26:14 +0000 (15:26 +0100)]
validate: launcher: Introduce new parameter for log file redirecting
Allow log file redirection through the new --redirect-logs parameter.
Keep the old --logs-dir stdout/stderr parameter, but reset to the
default logs directory in that case, and set redirect_logs internally.
This also prevents the creation of an stdout/stderr directory for
writing xunit.xml.
https://bugzilla.gnome.org/show_bug.cgi?id=742973
Thiago Santos [Fri, 9 Jan 2015 17:04:16 +0000 (14:04 -0300)]
pad-monitor: plug caps leak on iterator resync
Thiago Santos [Fri, 9 Jan 2015 15:36:31 +0000 (12:36 -0300)]
pad-monitor: use the same filter caps when querying downstream caps
To avoid comparing the real result that has been filtered against
a much larger caps that contains all possibilities.
Thibault Saunier [Tue, 9 Dec 2014 09:09:15 +0000 (10:09 +0100)]
validate: tests: disable g_log handler
It messes up our own failures counter
And pass test-utils into gst-indent
Thiago Santos [Mon, 8 Dec 2014 21:53:55 +0000 (18:53 -0300)]
tests: padmonitor: disable glog handling
It messes up our own failures counter
Thiago Santos [Mon, 8 Dec 2014 20:27:52 +0000 (17:27 -0300)]
pad-monitor: get correct caps to check for proxied fields in caps queries
Elements should proxy the peer element's caps fields and not what they
have currently set on their pads when replying to a caps query
Thiago Santos [Mon, 8 Dec 2014 20:17:08 +0000 (17:17 -0300)]
pad-monitor: Only add pending caps fields for source pads
As caps events are downstream, caps set travels from sinks to
sources. Adding pending setcaps values to sink pads makes no sense
as when a new caps is set on the sink it would compare with values
currently set on the source pad, causing a critical failure when
renegotiation happens.
Thibault Saunier [Mon, 8 Dec 2014 17:23:10 +0000 (18:23 +0100)]
validate: launcher: Take the timeout as ref timeout to compute hard_timeout
when it is provided.
Thibault Saunier [Mon, 8 Dec 2014 14:27:54 +0000 (15:27 +0100)]
validate: launcher: Set a hard timeout on GstValidate tests if we know the duration
Thibault Saunier [Mon, 8 Dec 2014 13:37:15 +0000 (14:37 +0100)]
validate: launcher: Force kill subprocess when done with them
Making sure that we do not end up having spurious subprocess around
Thiago Santos [Mon, 8 Dec 2014 11:42:51 +0000 (08:42 -0300)]
launcher: baseclass: add missing parameter
Fixes "NameError: global name 'options' is not defined"
Thibault Saunier [Mon, 8 Dec 2014 09:09:57 +0000 (10:09 +0100)]
validate: launcher: Properly handle non default main dir
for the case of the new testsuite files
Thibault Saunier [Sun, 7 Dec 2014 11:30:25 +0000 (12:30 +0100)]
validate: launcher: Make the gstvalidate application a python module
Thibault Saunier [Sat, 6 Dec 2014 09:53:37 +0000 (10:53 +0100)]
validate: Remove remaining reference to launcher/apps/validate
It has been removed now.
Thibault Saunier [Wed, 3 Dec 2014 10:28:28 +0000 (11:28 +0100)]
validate: Avoid assert removing an already removed signal handler
And, make sure that we set the return value != 0 when we receive
SIGINT
Thibault Saunier [Tue, 2 Dec 2014 16:32:18 +0000 (17:32 +0100)]
validate: Handle setting the HTTP server local path from testsuites
Thibault Saunier [Tue, 2 Dec 2014 14:41:17 +0000 (15:41 +0100)]
validate: Rename gst-qa-assets to gst-integration-testsuites
Thibault Saunier [Tue, 2 Dec 2014 14:39:09 +0000 (15:39 +0100)]
validate: print execution of set_subtitles actions
Thibault Saunier [Tue, 2 Dec 2014 09:02:09 +0000 (10:02 +0100)]
validate: Factor out an LauncherConfig class type to handle configurations
Allowing us to more simply define default value and expose an API on
top of it
Thibault Saunier [Tue, 2 Dec 2014 09:00:42 +0000 (10:00 +0100)]
validate: Remove file specific blacklisted tests
Thibault Saunier [Sat, 29 Nov 2014 12:43:06 +0000 (13:43 +0100)]
validate: Let the user know when new tests are added, or tests are REMOVED
Thibault Saunier [Fri, 28 Nov 2014 23:03:04 +0000 (00:03 +0100)]
validate: Add a cleaner API to setup tests in testsuite files
With the testsuite format you will get a setup_tests(tests_manager,
options) function called for each TestManager.
The function will have the exact same role as with old config
file but with a clean API and not magic global variables.
This implies that we need default blacklist to be directly set
on the TestManager and not on options.blacklisted_test
Thibault Saunier [Fri, 28 Nov 2014 21:58:09 +0000 (22:58 +0100)]
validate: Add a way to sync all assets, including big ones
Thibault Saunier [Fri, 28 Nov 2014 21:42:47 +0000 (22:42 +0100)]
validate: Remove the default testsuite implementation
The default testsuite implementation should belong to the default
asset repo where we have the corresponding knowledge.
We should style manage a sensible list of known blacklisted tests,
encoding profiles, and generators in GstValidate itself and allow testsuite
actual implementations to easily use them though the register_default_*
methods.
This allow us to be able to remove the ugly execfile() call.
Thibault Saunier [Thu, 27 Nov 2014 11:11:43 +0000 (12:11 +0100)]
validate: Make sure to at least listen to GStreamer and GLib g_logs
If somewhere else someone is overriding the g_log default handler,
we would not get notified of anything.
Thibault Saunier [Thu, 27 Nov 2014 12:48:17 +0000 (13:48 +0100)]
validate: Disable coloration of GST_DEBUG logs when we have no-color
Do that only when those logs are not saved to a file
Thibault Saunier [Wed, 26 Nov 2014 16:50:11 +0000 (17:50 +0100)]
validate: Factor out a function to print action types parametters
+ Remove playback-type from the list and just print it
Thiago Santos [Wed, 19 Nov 2014 20:16:02 +0000 (17:16 -0300)]
pad-monitor: do not enforce caps querying rules for converters
Some encoders/decoders can also be converters, do not enforce
caps proxying rules for them
Vineeth T M [Fri, 28 Nov 2014 05:44:12 +0000 (11:14 +0530)]
validate: fix typo in documentation
There are some typing mistakes in gst-validate-launcher --help
Hence fixing the same.
https://bugzilla.gnome.org/show_bug.cgi?id=740833
Thibault Saunier [Tue, 25 Nov 2014 14:35:09 +0000 (15:35 +0100)]
validate: Handle unlimited tests duration
Running full length scenario when the user asks
Thibault Saunier [Tue, 25 Nov 2014 14:32:31 +0000 (15:32 +0100)]
validate: Already having a monitor is no error
Thibault Saunier [Tue, 25 Nov 2014 14:30:42 +0000 (15:30 +0100)]
validate: pre commit hook: Do not try to run pep8 on non python files!
Thibault Saunier [Tue, 25 Nov 2014 14:29:29 +0000 (15:29 +0100)]
validate: Add scub_*_seeking_full scenarios
Which basically do the same thing as scrub_*_seeking but during
throughout the whole duration of the media
Thibault Saunier [Fri, 21 Nov 2014 18:35:16 +0000 (19:35 +0100)]
validate: Enhance documentation
Thibault Saunier [Wed, 19 Nov 2014 16:58:23 +0000 (17:58 +0100)]
validate: Add an option to update all .media_info files
Thibault Saunier [Sun, 16 Nov 2014 22:05:45 +0000 (23:05 +0100)]
validate:scenario: Execute actions without playback time without a valid position
If the user did not specify any playback time we should be able to
execute actions even if the pipeline can't answer the position query
+ Make simpler to read the conditions of an action execution
Thibault Saunier [Sun, 9 Nov 2014 18:08:52 +0000 (19:08 +0100)]
validate:scenario: Properly handle ASYNC action execution in the API
The ->execute function now return a GstValidateExecuteActionReturn
which can be set as ASYNC in order to tell the scenario that the action
will be executed asynchronously, when the action is done, the caller is
responsible for calling gst_validate_action_set_done(); so that the
scenario keeps going on.
In this commit we make sure that the old API keeps working as
GST_VALIDATE_EXECUTE_ACTION_ERROR == FALSE and
GST_VALIDATE_EXECUTE_ACTION_OK == TRUE
Morevover GstValidateExecuteActionReturn is just a define
API:
+ gst_validate_action_set_done
+ GstValidateExecuteActionReturn
https://bugzilla.gnome.org/show_bug.cgi?id=739854
Thibault Saunier [Fri, 7 Nov 2014 22:19:59 +0000 (23:19 +0100)]
validate: Add a GstValidateActionTypeFlag flag
Allowing us to define action types more in detail.
Keep backward compatibility, at least with the C API
https://bugzilla.gnome.org/show_bug.cgi?id=739854
Thibault Saunier [Fri, 21 Nov 2014 13:01:48 +0000 (14:01 +0100)]
validate: Add a GstValidatePipelineMonitor subclass
We had quite a bit of code dedicated to handled GstPipeline monitoring
inside GstValidateBinMonitor, cleanly split that code into a new object
type
https://bugzilla.gnome.org/show_bug.cgi?id=740704
Thibault Saunier [Thu, 20 Nov 2014 10:55:45 +0000 (11:55 +0100)]
validate:launcher: Force clock sync for some protocols
In HLS for example, not having clock sync might lead to races and failures
do not test that for now
Thibault Saunier [Thu, 20 Nov 2014 10:53:34 +0000 (11:53 +0100)]
validate: Don't fail getting master report from a ghostpad without target
Thibault Saunier [Wed, 19 Nov 2014 19:05:57 +0000 (20:05 +0100)]
validate: Print current position even if we do not know the rate
That could cause gst-validate-launcher to wrongly concider tests
as timeout
Thibault Saunier [Mon, 17 Nov 2014 10:39:12 +0000 (11:39 +0100)]
validate:scenario: Force clock sink for scenarios with a pause action
Thibault Saunier [Sat, 15 Nov 2014 17:08:42 +0000 (18:08 +0100)]
validate: Handle wrong paths when listing avalaible apps
User can make mistake or we can have an empty path.
Thibault Saunier [Tue, 11 Nov 2014 19:56:04 +0000 (20:56 +0100)]
validate: Do not check if first buffer running time is 0
It can perfectly not be 0, so it makes no sense to check that.
https://bugzilla.gnome.org/show_bug.cgi?id=739965
Thibault Saunier [Thu, 6 Nov 2014 22:43:47 +0000 (23:43 +0100)]
validate: Add audiomixer test to the default testsuite
Thibault Saunier [Sat, 1 Nov 2014 08:24:15 +0000 (09:24 +0100)]
pad-monitor: Give better details about segment mismatch issues
Thibault Saunier [Thu, 30 Oct 2014 13:10:33 +0000 (14:10 +0100)]
validate: Be more precise in issue type for wrong seqnum
Depending on the type of event where the bug occurs,
it is not the same issue type. That allows us to have
much precise reports, and better explain the user
where the issue stands.
Thibault Saunier [Thu, 16 Oct 2014 15:32:56 +0000 (17:32 +0200)]
validate: Fix a few annotation issues
Thibault Saunier [Wed, 15 Oct 2014 15:03:48 +0000 (17:03 +0200)]
validate: Add the notion of WAIT_MULTIPLIER for the wait action
Allowing the user to decide to wait more, or less, or even not wait
for the wait action to execute when running scenarios.
Thibault Saunier [Sun, 28 Sep 2014 20:37:01 +0000 (22:37 +0200)]
validate:scenario: Report an EXECUTION_ERROR on action execution failure
If the action type handles a better error report type, it should just
return TRUE, and report its issue itself.
Thibault Saunier [Fri, 19 Sep 2014 07:13:13 +0000 (09:13 +0200)]
validate: Do not exit when we can not discover a result file
Loggable.error actually exit the process, it is not what we want!
+ Avoid a backtrace
Edward Hervey [Mon, 3 Nov 2014 10:50:54 +0000 (11:50 +0100)]
scenario: Allow set-property action to work much earlier
By default an action has no playback-time, this makes it actionable
immediatly.
When no playback-time is set on a set-property action, it will
be activated the moment the element is added in the pipeline.
Edward Hervey [Fri, 31 Oct 2014 15:01:52 +0000 (16:01 +0100)]
validate-bin-monitor: Initialize local variable
Avoids segfaults when freeing them if they didn't get filled in
Mathieu Duponchelle [Sun, 26 Oct 2014 13:47:12 +0000 (14:47 +0100)]
validate: update pre-commit hook.
+ Allows to run multiple pre-commit hooks.
+ Always relink the hooks on autogen.
+ Run pep8 on commited python files.
https://bugzilla.gnome.org/show_bug.cgi?id=739208