ALSA: usb-audio: Fix implicit fb endpoint setup by quirk

commit 2bc16b9f3223d049b57202ee702fcb5b9b507019 upstream.

The commit a60945fd08e4 ("ALSA: usb-audio: move implicit fb quirks to
separate function") introduced an error in the handling of quirks for
implicit feedback endpoints. This commit fixes this.

If a quirk successfully sets up an implicit feedback endpoint, usb-audio
no longer tries to find the implicit fb endpoint itself.

Fixes: a60945fd08e4 ("ALSA: usb-audio: move implicit fb quirks to separate function")
Signed-off-by: Manuel Reinhardt <manuel.rhdt@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add quirk for HP EliteBook 840 G5

commit 4cd3016ce996494f78fdfd87ea35c8ca5d0b413e upstream.

This enables mute LED support and fixes switching jacks when the laptop
is docked.

Signed-off-by: Jurica Vukadin <jurica.vukadin@rt-rk.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86: Add check_period PMU callback

commit 81ec3f3c4c4d78f2d3b6689c9816bfbdf7417dbb upstream.

Vince (and later on Ravi) reported crashes in the BTS code during
fuzzing with the following backtrace:

  general protection fault: 0000 [#1] SMP PTI
  ...
  RIP: 0010:perf_prepare_sample+0x8f/0x510
  ...
  Call Trace:
   <IRQ>
   ? intel_pmu_drain_bts_buffer+0x194/0x230
   intel_pmu_drain_bts_buffer+0x160/0x230
   ? tick_nohz_irq_exit+0x31/0x40
   ? smp_call_function_single_interrupt+0x48/0xe0
   ? call_function_single_interrupt+0xf/0x20
   ? call_function_single_interrupt+0xa/0x20
   ? x86_schedule_events+0x1a0/0x2f0
   ? x86_pmu_commit_txn+0xb4/0x100
   ? find_busiest_group+0x47/0x5d0
   ? perf_event_set_state.part.42+0x12/0x50
   ? perf_mux_hrtimer_restart+0x40/0xb0
   intel_pmu_disable_event+0xae/0x100
   ? intel_pmu_disable_event+0xae/0x100
   x86_pmu_stop+0x7a/0xb0
   x86_pmu_del+0x57/0x120
   event_sched_out.isra.101+0x83/0x180
   group_sched_out.part.103+0x57/0xe0
   ctx_sched_out+0x188/0x240
   ctx_resched+0xa8/0xd0
   __perf_event_enable+0x193/0x1e0
   event_function+0x8e/0xc0
   remote_function+0x41/0x50
   flush_smp_call_function_queue+0x68/0x100
   generic_smp_call_function_single_interrupt+0x13/0x30
   smp_call_function_single_interrupt+0x3e/0xe0
   call_function_single_interrupt+0xf/0x20
   </IRQ>

The reason is that while event init code does several checks
for BTS events and prevents several unwanted config bits for
BTS event (like precise_ip), the PERF_EVENT_IOC_PERIOD allows
to create BTS event without those checks being done.

Following sequence will cause the crash:

If we create an 'almost' BTS event with precise_ip and callchains,
and it into a BTS event it will crash the perf_prepare_sample()
function because precise_ip events are expected to come
in with callchain data initialized, but that's not the
case for intel_pmu_drain_bts_buffer() caller.

Adding a check_period callback to be called before the period
is changed via PERF_EVENT_IOC_PERIOD. It will deny the change
if the event would become BTS. Plus adding also the limit_period
check as well.

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20190204123532.GA4794@krava
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Fix impossible ring-buffer sizes warning

commit 528871b456026e6127d95b1b2bd8e3a003dc1614 upstream.

The following commit:

  9dff0aa95a32 ("perf/core: Don't WARN() for impossible ring-buffer sizes")

results in perf recording failures with larger mmap areas:

  root@skl:/tmp# perf record -g -a
  failed to mmap with 12 (Cannot allocate memory)

The root cause is that the following condition is buggy:

if (order_base_2(size) >= MAX_ORDER)
goto fail;

The problem is that @size is in bytes and MAX_ORDER is in pages,
so the right test is:

if (order_base_2(size) >= PAGE_SHIFT+MAX_ORDER)
goto fail;

Fix it.

Reported-by: "Jin, Yao" <yao.jin@linux.intel.com>
Bisected-by: Borislav Petkov <bp@alien8.de>
Analyzed-by: Peter Zijlstra <peterz@infradead.org>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Fixes: 9dff0aa95a32 ("perf/core: Don't WARN() for impossible ring-buffer sizes")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP5+: Fix inverted nirq pin interrupts with irq_set_type

commit d0243693fbf6fbd48b4efb2ba7210765983b03e3 upstream.

Commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about the use of
IRQ_TYPE_NONE") started warning about incorrect dts usage for irqs.
ARM GIC only supports active-high interrupts for SPI (Shared Peripheral
Interrupts), and the Palmas PMIC by default is active-low.

Palmas PMIC allows changing the interrupt polarity using register
PALMAS_POLARITY_CTRL_INT_POLARITY, but configuring sys_nirq1 with
a pull-down and setting PALMAS_POLARITY_CTRL_INT_POLARITY made the
Palmas RTC interrupts stop working. This can be easily tested with
kernel tools rtctest.c.

Turns out the SoC inverts the sys_nirq pins for GIC as they do not go
through a peripheral device but go directly to the MPUSS wakeupgen.
I've verified this by muxing the interrupt line temporarily to gpio_wk16
instead of sys_nirq1. with a gpio, the interrupt works fine both
active-low and active-high with the SoC internal pull configured and
palmas polarity configured. But as sys_nirq1, the interrupt only works
when configured ACTIVE_LOW for palmas, and ACTIVE_HIGH for GIC.

Note that there was a similar issue earlier with tegra114 and palmas
interrupt polarity that got fixed by commit df545d1cd01a ("mfd: palmas:
Provide irq flags through DT/platform data"). However, the difference
between omap5 and tegra114 is that tegra inverts the palmas interrupt
twice, once when entering tegra PMC, and again when exiting tegra PMC
to GIC.

Let's fix the issue by adding a custom wakeupgen_irq_set_type() for
wakeupgen and invert any interrupts with wrong polarity. Let's also
warn about any non-sysnirq pins using wrong polarity. Note that we
also need to update the dts for the level as IRQ_TYPE_NONE never
has irq_set_type() called, and let's add some comments and use proper
pin nameing to avoid more confusion later on.

Cc: Belisko Marek <marek.belisko@gmail.com>
Cc: Dmitry Lifshitz <lifshitz@compulab.co.il>
Cc: "Dr. H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org # v4.17+
Reported-by: Belisko Marek <marek.belisko@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISK

commit 7ad222b3aed350adfc27ee7eec4587ffe55dfdce upstream.

This adds ELAN0617 to the ACPI table to support Elan touchpad found in
Lenovo V330-15ISK.

Signed-off-by: Mauro Ciancio <mauro@acadeu.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G"

commit f420c54e4b12c1361c6ed313002ee7bd7ac58362 upstream.

This reverts commit 7db54c89f0b30a101584e09d3729144e6170059d as it
breaks Acer Aspire V-371 and other devices. According to Elan:

"Acer Aspire F5-573G is MS Precision touchpad which should use hid
 multitouch driver. ELAN0501 should not be added in elan_i2c."

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202503
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: mxc: move gpio noirq suspend/resume to syscore phase

commit 1a5287a3dbc34cd0c02c8f64c9131bd23cdfe2bb upstream.

During noirq suspend/resume phase, GPIO irq could arrive
and its registers like IMR will be changed by irq handle
process, to make the GPIO registers exactly when it is
powered ON after resume, move the GPIO noirq suspend/resume
callback to syscore suspend/resume phase, local irq is
disabled at this phase so GPIO registers are atomic.

Fixes: c19fdaeea0aa ("gpio: mxc: add power management support")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Martin Hundebøll <martin@geanix.com>
Cc: <stable@vger.kernel.org> # 4.19.x+
Signed-off-by: Sasha Levin <sashal@kernel.org>

CIFS: Do not assume one credit for async responses

[ Upstream commit 0fd1d37b0501efc6e295f56ab55cdaff784aa50c ]

If we don't receive a response we can't assume that the server
granted one credit. Assume zero credits in such cases.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kvm: sev: Fail KVM_SEV_INIT if already initialized

[ Upstream commit 3f14a89d1132dcae3c8ce6721c6ef51f6e6d9b5f ]

By code inspection, it was found that multiple calls to KVM_SEV_INIT
could deplete asid bits and overwrite kvm_sev_info's regions_list.

Multiple calls to KVM_SVM_INIT is not likely to occur with QEMU, but this
should likely be fixed anyway.

This code is serialized by kvm->lock.

Fixes: 1654efcbc431 ("KVM: SVM: Add KVM_SEV_INIT command")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Limit memory used by lock request calls to a page

[ Upstream commit 92a8109e4d3a34fb6b115c9098b51767dc933444 ]

The code tries to allocate a contiguous buffer with a size supplied by
the server (maxBuf). This could fail if memory is fragmented since it
results in high order allocations for commonly used server
implementations. It is also wasteful since there are probably
few locks in the usual case. Limit the buffer to be no larger than a
page to avoid memory allocation failures due to fragmentation.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/falcon: avoid touching registers if engine is off

[ Upstream commit a5176a4cb85bb6213daadf691097cf411da35df2 ]

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau: Don't disable polling in fallback mode

[ Upstream commit 118780066e30c34de3d9349710b51780bfa0ba83 ]

When a fan is controlled via linear fallback without cstate, we
shouldn't stop polling.  Otherwise it won't be adjusted again and
keeps running at an initial crazy pace.

Fixes: 800efb4c2857 ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios")
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447
Reported-by: Thomas Blume <thomas.blume@suse.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: pl061: handle failed allocations

[ Upstream commit df209c43a0e8258e096fb722dfbdae4f0dd13fde ]

devm_kzalloc(), devm_kstrdup() and devm_kasprintf() all can
fail internal allocation and return NULL. Using any of the assigned
objects without checking is not safe. As this is early in the boot
phase and these allocations really should not fail, any failure here
is probably an indication of a more serious issue so it makes little
sense to try and rollback the previous allocated resources or try to
continue;  but rather the probe function is simply exited with -ENOMEM.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 684284b64aae ("ARM: integrator: add MMCI device to IM-PD1")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: kirkwood: Fix polarity of GPIO fan lines

[ Upstream commit b5f034845e70916fd33e172fad5ad530a29c10ab ]

These two lines are active high, not active low. The bug was
found when we changed the kernel to respect the polarity defined
in the device tree.

Fixes: 1b90e06b1429 ("ARM: kirkwood: Use devicetree to define DNS-32[05] fan")
Cc: Jamie Lentin <jm@lentin.co.uk>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Julien D'Ascenzio <jdascenzio@posteo.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Reported-by: Julien D'Ascenzio <jdascenzio@posteo.net>
Tested-by: Julien D'Ascenzio <jdascenzio@posteo.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: da850-lcdk: Correct the sound card name

[ Upstream commit c25748acc5c20786ecb7518bfeae8fcef93472d6 ]

To avoid  the following error:
asoc-simple-card sound: ASoC: Failed to create card debugfs directory

Which is because the card name contains '/' character, which can not be
used in file or directory names.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: da850-lcdk: Correct the audio codec regulators

[ Upstream commit bd540ebe68c3017194a1caa38e075bbbc0832749 ]

Add the board level fixed regulators for 3.3V and 1.8V which is used to
power - among other things - the tlv320aic3106 codec.

Apart from removing the following warning during boot:
tlv320aic3x-codec 0-0018: Invalid supply voltage(s) AVDD: -22, DVDD: -22

With the correct voltages the driver can select correct OCMV value to
reduce pop noise.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: da850-evm: Correct the sound card name

[ Upstream commit 7fca69d4e43fa1ae9cb4f652772c132dc5a659c6 ]

To avoid  the following error:
asoc-simple-card sound: ASoC: Failed to create card debugfs directory

Which is because the card name contains '/' character, which can not be
used in file or directory names.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: da850-evm: Correct the audio codec regulators

[ Upstream commit 706edaa88835e3d8de8920584ad5da76dd3d6666 ]

Add the board level fixed regulators for 3.3V and 1.8V which is used to
power - among other things - the tlv320aic3106 codec.

Apart from removing the following warning during boot:
tlv320aic3x-codec 0-0018: Too high supply voltage(s) AVDD: 5000000, DVDD: 5000000

With the correct voltages the driver can select correct OCMV value to
reduce pop noise.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hang

[ Upstream commit 0c6c8125582714e1fd3544983eba3d750db0f5b8 ]

effect asics: VEGA10 and VEGA12

Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: pad fake subsys NQN vid and ssvid with zeros

[ Upstream commit 3da584f57133e51aeb84aaefae5e3d69531a1e4f ]

We need to preserve the leading zeros in the vid and ssvid when generating
a unique NQN. Truncating these may lead to naming collisions.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-multipath: zero out ANA log buffer

[ Upstream commit c7055fd15ff46d92eb0dd1c16a4fe010d58224c8 ]

When nvme_init_identify() fails the ANA log buffer is deallocated
but _not_ set to NULL. This can cause double free oops when this
controller is deleted without ever being reconnected.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: fix out of bounds access in nvme_cqe_pending

[ Upstream commit dcca1662727220d18fa351097ddff33f95f516c5 ]

There is an out of bounds array access in nvme_cqe_peding().

When enable irq_thread for nvme interrupt, there is racing between the
nvmeq->cq_head updating and reading.

nvmeq->cq_head is updated in nvme_update_cq_head(), if nvmeq->cq_head
equals nvmeq->q_depth and before its value set to zero, nvme_cqe_pending()
uses its value as an array index, the index will be out of bounds.

Signed-off-by: Hongbo Yao <yaohongbo@huawei.com>
[hch: slight coding style update]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: use the same attributes when freeing host_mem_desc_bufs.

[ Upstream commit cc667f6d5de023ee131e96bb88e5cddca23272bd ]

When using HMB the PCIe host driver allocates host_mem_desc_bufs using
dma_alloc_attrs() but frees them using dma_free_coherent(). Use the
correct dma_free_attrs() function to free the buffers.

Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358767: fix output H/V syncs

[ Upstream commit 7923e09c7a766e2d58de7fc395bb84c18e5bc625 ]

The H and V syncs of the DP output are always set to active high. This
patch fixes the syncs by configuring them according to the videomode.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-7-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358767: reject modes which require too much BW

[ Upstream commit 51b9e62eb6950c762162ab7eb8390990179be067 ]

The current driver accepts any videomode with pclk < 154MHz. This is not
correct, as with 1 lane and/or 1.62Mbps speed not all videomodes can be
supported.

Add code to reject modes that require more bandwidth that is available.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-6-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value

[ Upstream commit 9a63bd6fe1b5590ffa42ae2ed22ee21363293e31 ]

Initially DP0_SRCCTRL is set to a static value which includes
DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of
1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number.

This patch changes the configuration as follows:

Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct
value.

DP1_SRCCTRL needs two bits to be set to the same value as DP0_SRCCTRL:
SSCG and BW27. All other bits can be zero.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-5-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358767: fix single lane configuration

[ Upstream commit 4d9d54a730434cc068dd3515ba6116697196f77b ]

PHY_2LANE bit is always set in DP_PHY_CTRL, breaking 1 lane use.

Set PHY_2LANE only when 2 lanes are used.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-4-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANE

[ Upstream commit adf4109896bbee27fd2ac3b48d22d6a0062fe517 ]

DP1_SRCCTRL register and PHY_2LANE field did not have matching defines.
Add these.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-3-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358767: add bus flags

[ Upstream commit 4842379cbe6e851de914a7132f76f4e200b9a98b ]

tc358767 driver does not set DRM bus_flags, even if it does configures
the polarity settings into its registers. This means that the DPI source
can't configure the polarities correctly.

Add sync flags accordingly.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-2-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: check if policy is inactive early in __cpufreq_get()

[ Upstream commit 2f66196208c98b3d1b4294edffb2c5a8197be899 ]

cpuinfo_cur_freq gets current CPU frequency as detected by hardware
while scaling_cur_freq last known CPU frequency. Some platforms may not
allow checking the CPU frequency of an offline CPU or the associated
resources may have been released via cpufreq_exit when the CPU gets
offlined, in which case the policy would have been invalidated already.
If we attempt to get current frequency from the hardware, it may result
in hang or crash.

For example on Juno, I see:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000188
[0000000000000188] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 5 PID: 4202 Comm: cat Not tainted 4.20.0-08251-ga0f2c0318a15-dirty #87
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform
pstate: 40000005 (nZcv daif -PAN -UAO)
pc : scmi_cpufreq_get_rate+0x34/0xb0
lr : scmi_cpufreq_get_rate+0x34/0xb0
Call trace:
 scmi_cpufreq_get_rate+0x34/0xb0
 __cpufreq_get+0x34/0xc0
 show_cpuinfo_cur_freq+0x24/0x78
 show+0x40/0x60
 sysfs_kf_seq_show+0xc0/0x148
 kernfs_seq_show+0x44/0x50
 seq_read+0xd4/0x480
 kernfs_fop_read+0x15c/0x208
 __vfs_read+0x60/0x188
 vfs_read+0x94/0x150
 ksys_read+0x6c/0xd8
 __arm64_sys_read+0x24/0x30
 el0_svc_common+0x78/0x100
 el0_svc_handler+0x38/0x78
 el0_svc+0x8/0xc
---[ end trace 3d1024e58f77f6b2 ]---

So fix the issue by checking if the policy is invalid early in
__cpufreq_get before attempting to get the current frequency.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: fix trace_sys_exit hook

[ Upstream commit 775800b0f1d7303d4fd8ce0e0d9eca4ff2f338f2 ]

Fix compilation error.

Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools uapi: fix RISC-V 64-bit support

[ Upstream commit d0df00e30e4bf9bc27ddbd092ad683ff6121b360 ]

The BPF library is not built on 64-bit RISC-V, as the BPF feature is
not detected. Looking more in details, feature/test-bpf.c fails to build
with the following error:

| In file included from /tmp/linux-4.19.12/tools/include/uapi/asm/bitsperlong.h:17,
|                  from /tmp/linux-4.19.12/tools/include/uapi/asm-generic/unistd.h:2,
|                  from /usr/include/riscv64-linux-gnu/asm/unistd.h:1,
|                  from test-bpf.c:2:
| /tmp/linux-4.19.12/tools/include/asm-generic/bitsperlong.h:14:2: error: #error Inconsistent word size. Check asm/bitsperlong.h
|  #error Inconsistent word size. Check asm/bitsperlong.h
|   ^~~~~

The UAPI from the tools directory is missing RISC-V support, therefore
bitsperlong.h from asm-generic is used, defaulting to 32 bits.

Fix that by adding tools/arch/riscv/include/uapi/asm/bitsperlong.h as
a copy of arch/riscv/include/uapi/asm/bitsperlong.h and by updating
tools/include/uapi/asm/bitsperlong.h.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test shell: Use a fallback to get the pathname in vfs_getname

[ Upstream commit 03fa483821c0b4db7c2b1453d3332f397d82313f ]

Some kernels, like 4.19.13-300.fc29.x86_64 in fedora 29, fail with the
existing probe definition asking for the contents of result->name,
working when we ask for the 'filename' variable instead, so add a
fallback to that.

Now those tests are back working on fedora 29 systems with that kernel:

  # perf test vfs_getname
  65: Use vfs_getname probe to get syscall args filenames   : Ok
  66: Add vfs_getname probe to get syscall args filenames   : Ok
  67: Check open filename arg using perf trace + vfs_getname: Ok
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-klt3n0i58dfqttveti09q3fi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf report: Fix wrong iteration count in --branch-history

[ Upstream commit a3366db06bb656cef2e03f30f780d93059bcc594 ]

By calculating the removed loops, we can get the iteration count.

But the iteration count could be reported incorrectly, reporting
impossibly high counts.

That's because previous code uses the number of removed LBR entries for
the iteration count. That's not good. Fix this by increasing the
iteration count when a loop is detected.

When matching the chain, the iteration count would be added up, finally we need
to compute the average value when printing out.

For example,

  $ perf report --branch-history --stdio --no-children

Before:

  ---f2 +0
     |
     |--33.62%--f1 +9 (cycles:1)
     |          f1 +0
     |          main +22 (cycles:1)
     |          main +17
     |          main +38 (cycles:1)
     |          main +27
     |          f1 +26 (cycles:1)
     |          f1 +24
     |          f2 +27 (cycles:7)
     |          f2 +0
     |          f1 +19 (cycles:1)
     |          f1 +14
     |          f2 +27 (cycles:11)
     |          f2 +0
     |          f1 +9 (cycles:1 iter:2968 avg_cycles:3)
     |          f1 +0
     |          main +22 (cycles:1 iter:2968 avg_cycles:3)
     |          main +17
     |          main +38 (cycles:1 iter:2968 avg_cycles:3)

2968 is an impossible high iteration count and avg_cycles is too small.

After:

  ---f2 +0
     |
     |--33.62%--f1 +9 (cycles:1)
     |          f1 +0
     |          main +22 (cycles:1)
     |          main +17
     |          main +38 (cycles:1)
     |          main +27
     |          f1 +26 (cycles:1)
     |          f1 +24
     |          f2 +27 (cycles:7)
     |          f2 +0
     |          f1 +19 (cycles:1)
     |          f1 +14
     |          f2 +27 (cycles:11)
     |          f2 +0
     |          f1 +9 (cycles:1 iter:1 avg_cycles:23)
     |          f1 +0
     |          main +22 (cycles:1 iter:1 avg_cycles:23)
     |          main +17
     |          main +38 (cycles:1 iter:1 avg_cycles:23)

avg_cycles:23 is the average cycles of this iteration.

Fixes: c4ee06251d42 ("perf report: Calculate the average cycles of iterations")

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1546582230-17507-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: NUMA: Use correct type for printing addresses on i386-PAE

[ Upstream commit b9ced18acf68dffebe6888c7ec765a2b1db7a039 ]

The addresses of NUMA nodes are not printed correctly on i386-PAE
which is misleading.

Here is a debian9-32bit with PAE in a QEMU guest having more than 4G
of memory:

qemu-system-i386 \
-hda /var/lib/libvirt/images/debian32.qcow2 \
-m 5G \
-enable-kvm \
-smp 10 \
-numa node,mem=512M,nodeid=0,cpus=0 \
-numa node,mem=512M,nodeid=1,cpus=1 \
-numa node,mem=512M,nodeid=2,cpus=2 \
-numa node,mem=512M,nodeid=3,cpus=3 \
-numa node,mem=512M,nodeid=4,cpus=4 \
-numa node,mem=512M,nodeid=5,cpus=5 \
-numa node,mem=512M,nodeid=6,cpus=6 \
-numa node,mem=512M,nodeid=7,cpus=7 \
-numa node,mem=512M,nodeid=8,cpus=8 \
-numa node,mem=512M,nodeid=9,cpus=9 \
-serial stdio

Because of the wrong value type, it prints as below:

[    0.021049] ACPI: SRAT Memory (0x0 length 0xa0000) in proximity domain 0 enabled
[    0.021740] ACPI: SRAT Memory (0x100000 length 0x1ff00000) in proximity domain 0 enabled
[    0.022425] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 1 enabled
[    0.023092] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 2 enabled
[    0.023764] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 3 enabled
[    0.024431] ACPI: SRAT Memory (0x80000000 length 0x20000000) in proximity domain 4 enabled
[    0.025104] ACPI: SRAT Memory (0xa0000000 length 0x20000000) in proximity domain 5 enabled
[    0.025791] ACPI: SRAT Memory (0x0 length 0x20000000) in proximity domain 6 enabled
[    0.026412] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 7 enabled
[    0.027118] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 8 enabled
[    0.027802] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 9 enabled

The upper half of the start address of the NUMA domains between 6
and 9 inclusive was cut, so the printed values are incorrect.

Fix the value type, to get the correct values in the log as follows:

[    0.023698] ACPI: SRAT Memory (0x0 length 0xa0000) in proximity domain 0 enabled
[    0.024325] ACPI: SRAT Memory (0x100000 length 0x1ff00000) in proximity domain 0 enabled
[    0.024981] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 1 enabled
[    0.025659] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 2 enabled
[    0.026317] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 3 enabled
[    0.026980] ACPI: SRAT Memory (0x80000000 length 0x20000000) in proximity domain 4 enabled
[    0.027635] ACPI: SRAT Memory (0xa0000000 length 0x20000000) in proximity domain 5 enabled
[    0.028311] ACPI: SRAT Memory (0x100000000 length 0x20000000) in proximity domain 6 enabled
[    0.028985] ACPI: SRAT Memory (0x120000000 length 0x20000000) in proximity domain 7 enabled
[    0.029667] ACPI: SRAT Memory (0x140000000 length 0x20000000) in proximity domain 8 enabled
[    0.030334] ACPI: SRAT Memory (0x160000000 length 0x20000000) in proximity domain 9 enabled

Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/sriov:Correct pfvf exchange logic

[ Upstream commit b8cf66182eddb22e9c7539821ed6eecdb4f86d1a ]

The pfvf exchange need be in exclusive mode. And add pfvf exchange in gpu
reset.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-By: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: fix the cockup in the previous patch

Commit d6951f582cc50ba0ad22ef46b599740966599b14 upstream.

The intention in the previous patch was to only place the processor
tables in the .rodata section if big.Little was being built and we
wanted the branch target hardening, but instead (due to the way it
was tested) it ended up always placing the tables into the .rodata
section.

Although harmless, let's correct this anyway.

Fixes: 3a4d0c2172bc ("ARM: ensure that processor vtables is not lost after boot")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: ensure that processor vtables is not lost after boot

Commit 3a4d0c2172bcf15b7a3d9d498b2b355f9864286b upstream.

Marek Szyprowski reported problems with CPU hotplug in current kernels.
This was tracked down to the processor vtables being located in an
init section, and therefore discarded after kernel boot, despite being
required after boot to properly initialise the non-boot CPUs.

Arrange for these tables to end up in .rodata when required.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Fixes: 383fb3ee8024 ("ARM: spectre-v2: per-CPU vtables to work around big.Little systems")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: spectre-v2: per-CPU vtables to work around big.Little systems

Commit 383fb3ee8024d596f488d2dbaf45e572897acbdb upstream.

In big.Little systems, some CPUs require the Spectre workarounds in
paths such as the context switch, but other CPUs do not.  In order
to handle these differences, we need per-CPU vtables.

We are unable to use the kernel's per-CPU variables to support this
as per-CPU is not initialised at times when we need access to the
vtables, so we have to use an array indexed by logical CPU number.

We use an array-of-pointers to avoid having function pointers in
the kernel's read/write .data section.

Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: add PROC_VTABLE and PROC_TABLE macros

Commit e209950fdd065d2cc46e6338e47e52841b830cba upstream.

Allow the way we access members of the processor vtable to be changed
at compile time.  We will need to move to per-CPU vtables to fix the
Spectre variant 2 issues on big.Little systems.

However, we have a couple of calls that do not need the vtable
treatment, and indeed cause a kernel warning due to the (later) use
of smp_processor_id(), so also introduce the PROC_TABLE macro for
these which always use CPU 0's function pointers.

Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: clean up per-processor check_bugs method call

Commit 945aceb1db8885d3a35790cf2e810f681db52756 upstream.

Call the per-processor type check_bugs() method in the same way as we
do other per-processor functions - move the "processor." detail into
proc-fns.h.

Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: split out processor lookup

Commit 65987a8553061515b5851b472081aedb9837a391 upstream.

Split out the lookup of the processor type and associated error handling
from the rest of setup_processor() - we will need to use this in the
secondary CPU bringup path for big.Little Spectre variant 2 mitigation.

Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: make lookup_processor_type() non-__init

Commit 899a42f836678a595f7d2bc36a5a0c2b03d08cbc upstream.

Move lookup_processor_type() out of the __init section so it is callable
from (eg) the secondary startup code during hotplug.

Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8810/1: vfp: Fix wrong assignement to ufp_exc

Commit 5df7a99bdd0de4a0480320264c44c04543c29d5a upstream.

In vfp_preserve_user_clear_hwstate, ufp_exc->fpinst2 gets assigned to
itself. It should actually be hwstate->fpinst2 that gets assigned to the
ufp_exc field.

Fixes commit 3aa2df6ec2ca6bc143a65351cca4266d03a8bc41 ("ARM: 8791/1:
vfp: use __copy_to_user() when saving VFP state").

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8797/1: spectre-v1.1: harden __copy_to_user

Commit a1d09e074250fad24f1b993f327b18cc6812eb7a upstream.

Sanitize user pointer given to __copy_to_user, both for standard version
and memcopy version of the user accessor.

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8796/1: spectre-v1,v1.1: provide helpers for address sanitization

Commit afaf6838f4bc896a711180b702b388b8cfa638fc upstream.

Introduce C and asm helpers to sanitize user address, taking the
address range they target into account.

Use asm helper for existing sanitization in __copy_from_user().

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8795/1: spectre-v1.1: use put_user() for __put_user()

Commit e3aa6243434fd9a82e84bb79ab1abd14f2d9a5a7 upstream.

When Spectre mitigation is required, __put_user() needs to include
check_uaccess. This is already the case for put_user(), so just make
__put_user() an alias of put_user().

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8794/1: uaccess: Prevent speculative use of the current addr_limit

Commit 621afc677465db231662ed126ae1f355bf8eac47 upstream.

A mispredicted conditional call to set_fs could result in the wrong
addr_limit being forwarded under speculation to a subsequent access_ok
check, potentially forming part of a spectre-v1 attack using uaccess
routines.

This patch prevents this forwarding from taking place, but putting heavy
barriers in set_fs after writing the addr_limit.

Porting commit c2f0ad4fc089cff8 ("arm64: uaccess: Prevent speculative use
of the current addr_limit").

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8793/1: signal: replace __put_user_error with __put_user

Commit 18ea66bd6e7a95bdc598223d72757190916af28b upstream.

With Spectre-v1.1 mitigations, __put_user_error is pointless. In an attempt
to remove it, replace its references in frame setups with __put_user.

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8792/1: oabi-compat: copy oabi events using __copy_to_user()

Commit 319508902600c2688e057750148487996396e9ca upstream.

Copy events to user using __copy_to_user() rather than copy members of
individually with __put_user_error().
This has the benefit of disabling/enabling PAN once per event intead of
once per event member.

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8791/1: vfp: use __copy_to_user() when saving VFP state

Commit 3aa2df6ec2ca6bc143a65351cca4266d03a8bc41 upstream.

Use __copy_to_user() rather than __put_user_error() for individual
members when saving VFP state.
This has the benefit of disabling/enabling PAN once per copied struct
intead of once per write.

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8790/1: signal: always use __copy_to_user to save iwmmxt context

Commit 73839798af7ebc6c8d0c9271ebbbc148700e521f upstream.

When setting a dummy iwmmxt context, create a local instance and
use __copy_to_user both cases whether iwmmxt is being used or not.
This has the benefit of disabling/enabling PAN once for the whole copy
intead of once per write.

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8789/1: signal: copy registers using __copy_to_user()

Commit 5ca451cf6ed04443774bbb7ee45332dafa42e99f upstream.

When saving the ARM integer registers, use __copy_to_user() to
copy them into user signal frame, rather than __put_user_error().
This has the benefit of disabling/enabling PAN once for the whole copy
intead of once per write.

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-mq: fix a hung issue when fsync

[ Upstream commit 85bd6e61f34dffa8ec2dc75ff3c02ee7b2f1cbce ]

Florian reported a io hung issue when fsync(). It should be
triggered by following race condition.

data + post flush         a flush

blk_flush_complete_seq
  case REQ_FSEQ_DATA
    blk_flush_queue_rq
    issued to driver      blk_mq_dispatch_rq_list
                            try to issue a flush req
                            failed due to NON-NCQ command
                            .queue_rq return BLK_STS_DEV_RESOURCE

request completion
  req->end_io // doesn't check RESTART
  mq_flush_data_end_io
    case REQ_FSEQ_POSTFLUSH
      blk_kick_flush
        do nothing because previous flush
        has not been completed
     blk_mq_run_hw_queue
                              insert rq to hctx->dispatch
                              due to RESTART is still set, do nothing

To fix this, replace the blk_mq_run_hw_queue in mq_flush_data_end_io
with blk_mq_sched_restart to check and clear the RESTART flag.

Fixes: bd166ef1 (blk-mq-sched: add framework for MQ capable IO schedulers)
Reported-by: Florian Stecker <m19@florianstecker.de>
Tested-by: Florian Stecker <m19@florianstecker.de>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

eeprom: at24: add support for 24c2048

[ Upstream commit 37cf28d3b5bca1b532a0b6aac722e7f2788a9294 ]

Works with ST M24M02.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: eeprom: at24: add "atmel,24c2048" compatible string

[ Upstream commit 6c0c5dc33ff42af49243e94842d0ebdb153189ea ]

Add new compatible to the device tree bindings.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.19.23

Revert "exec: load_script: don't blindly truncate shebang string"

commit cb5b020a8d38f77209d0472a0fea755299a8ec78 upstream.

This reverts commit 8099b047ecc431518b9bb6bdbba3549bbecdc343.

It turns out that people do actually depend on the shebang string being
truncated, and on the fact that an interpreter (like perl) will often
just re-interpret it entirely to get the full argument list.

Reported-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.22

svcrdma: Remove max_sge check at connect time

commit e248aa7be86e8179f20ac0931774ecd746f3f5bf upstream.

Two and a half years ago, the client was changed to use gathered
Send for larger inline messages, in commit 655fec6987b ("xprtrdma:
Use gathered Send for large inline messages"). Several fixes were
required because there are a few in-kernel device drivers whose
max_sge is 3, and these were broken by the change.

Apparently my memory is going, because some time later, I submitted
commit 25fd86eca11c ("svcrdma: Don't overrun the SGE array in
svc_rdma_send_ctxt"), and after that, commit f3c1fd0ee294 ("svcrdma:
Reduce max_send_sges"). These too incorrectly assumed in-kernel
device drivers would have more than a few Send SGEs available.

The fix for the server side is not the same. This is because the
fundamental problem on the server is that, whether or not the client
has provisioned a chunk for the RPC reply, the server must squeeze
even the most complex RPC replies into a single RDMA Send. Failing
in the send path because of Send SGE exhaustion should never be an
option.

Therefore, instead of failing when the send path runs out of SGEs,
switch to using a bounce buffer mechanism to handle RPC replies that
are too complex for the device to send directly. That allows us to
remove the max_sge check to enable drivers with small max_sge to
work again.

Reported-by: Don Dutile <ddutile@redhat.com>
Fixes: 25fd86eca11c ("svcrdma: Don't overrun the SGE array in ...")
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

svcrdma: Reduce max_send_sges

commit f3c1fd0ee294abd4367dfa72d89f016c682202f0 upstream.

There's no need to request a large number of send SGEs because the
inline threshold already constrains the number of SGEs per Send.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cc: Don Dutile <ddutile@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: Force mac header to start of data on xmit

commit 9114daa825fc3f335f9bea3313ce667090187280 upstream.

The caller of ndo_start_xmit may not already have called
skb_reset_mac_header. The returned value of skb_mac_header/eth_hdr
therefore can be in the wrong position and even outside the current skbuff.
This for example happens when the user binds to the device using a
PF_PACKET-SOCK_RAW with enabled qdisc-bypass:

  int opt = 4;
  setsockopt(sock, SOL_PACKET, PACKET_QDISC_BYPASS, &opt, sizeof(opt));

Since eth_hdr is used all over the codebase, the batadv_interface_tx
function must always take care of resetting it.

Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Reported-by: syzbot+9d7405c7faa390e60b4e@syzkaller.appspotmail.com
Reported-by: syzbot+7d20bc3f1ddddc0f9079@syzkaller.appspotmail.com
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: Avoid WARN on net_device without parent in netns

commit 955d3411a17f590364238bd0d3329b61f20c1cd2 upstream.

It is not allowed to use WARN* helpers on potential incorrect input from
the user or transient problems because systems configured as panic_on_warn
will reboot due to such a problem.

A NULL return value of __dev_get_by_index can be caused by various problems
which can either be related to the system configuration or problems
(incorrectly returned network namespaces) in other (virtual) net_device
drivers. batman-adv should not cause a (harmful) WARN in this situation and
instead only report it via a simple message.

Fixes: b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface")
Reported-by: syzbot+c764de0fcfadca9a8595@syzkaller.appspotmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: refine validation of template and selector families

commit 35e6103861a3a970de6c84688c6e7a1f65b164ca upstream.

The check assumes that in transport mode, the first templates family
must match the address family of the policy selector.

Syzkaller managed to build a template using MODE_ROUTEOPTIMIZATION,
with ipv4-in-ipv6 chain, leading to following splat:

BUG: KASAN: stack-out-of-bounds in xfrm_state_find+0x1db/0x1854
Read of size 4 at addr ffff888063e57aa0 by task a.out/2050
 xfrm_state_find+0x1db/0x1854
 xfrm_tmpl_resolve+0x100/0x1d0
 xfrm_resolve_and_create_bundle+0x108/0x1000 [..]

Problem is that addresses point into flowi4 struct, but xfrm_state_find
treats them as being ipv6 because it uses templ->encap_family is used
(AF_INET6 in case of reproducer) rather than family (AF_INET).

This patch inverts the logic: Enforce 'template family must match
selector' EXCEPT for tunnel and BEET mode.

In BEET and Tunnel mode, xfrm_tmpl_resolve_one will have remote/local
address pointers changed to point at the addresses found in the template,
rather than the flowi ones, so no oob read will occur.

Reported-by: 3ntr0py1337@gmail.com
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: avoid KEEPALIVE_PENDING races in ceph_con_keepalive()

commit 4aac9228d16458cedcfd90c7fb37211cf3653ac3 upstream.

con_fault() can transition the connection into STANDBY right after
ceph_con_keepalive() clears STANDBY in clear_standby():

    libceph user thread               ceph-msgr worker

ceph_con_keepalive()
  mutex_lock(&con->mutex)
  clear_standby(con)
  mutex_unlock(&con->mutex)
                                mutex_lock(&con->mutex)
                                con_fault()
                                  ...
                                  if KEEPALIVE_PENDING isn't set
                                    set state to STANDBY
                                  ...
                                mutex_unlock(&con->mutex)
  set KEEPALIVE_PENDING
  set WRITE_PENDING

This triggers warnings in clear_standby() when either ceph_con_send()
or ceph_con_keepalive() get to clearing STANDBY next time.

I don't see a reason to condition queue_con() call on the previous
value of KEEPALIVE_PENDING, so move the setting of KEEPALIVE_PENDING
into the critical section -- unlike WRITE_PENDING, KEEPALIVE_PENDING
could have been a non-atomic flag.

Reported-by: syzbot+acdeb633f6211ccdf886@syzkaller.appspotmail.com
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Myungho Jung <mhjungk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ext4: use ext4_write_inode() when fsyncing w/o a journal"

commit 8fdd60f2ae3682caf2a7258626abc21eb4711892 upstream.

This reverts commit ad211f3e94b314a910d4af03178a0b52a7d1ee0a.

As Jan Kara pointed out, this change was unsafe since it means we lose
the call to sync_mapping_buffers() in the nojournal case.  The
original point of the commit was avoid taking the inode mutex (since
it causes a lockdep warning in generic/113); but we need the mutex in
order to call sync_mapping_buffers().

The real fix to this problem was discussed here:

https://lore.kernel.org/lkml/20181025150540.259281-4-bvanassche@acm.org

The proposed patch was to fix a syzbot complaint, but the problem can
also demonstrated via "kvm-xfstests -c nojournal generic/113".
Multiple solutions were discused in the e-mail thread, but none have
landed in the kernel as of this writing.  Anyway, commit
ad211f3e94b314 is absolutely the wrong way to suppress the lockdep, so
revert it.

Fixes: ad211f3e94b314a910d4af03178a0b52a7d1ee0a ("ext4: use ext4_write_inode() when fsyncing w/o a journal")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: Make set-mark default behavior backward compatible

commit e2612cd496e7b465711d219ea6118893d7253f52 upstream.

Fixes 9b42c1f179a6, which changed the default route lookup behavior for
tunnel mode SAs in the outbound direction to use the skb mark, whereas
previously mark=0 was used if the output mark was unspecified. In
mark-based routing schemes such as Android’s, this change in default
behavior causes routing loops or lookup failures.

This patch restores the default behavior of using a 0 mark while still
incorporating the skb mark if the SET_MARK (and SET_MARK_MASK) is
specified.

Tested with additions to Android's kernel unit test suite:
https://android-review.googlesource.com/c/kernel/tests/+/860150

Fixes: 9b42c1f179a6 ("xfrm: Extend the output_mark to support input direction and masking")
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: Always drop the XPRT_LOCK on XPRT_CLOSE_WAIT

This patch is only appropriate for stable kernels v4.16 - v4.19

Since commit 9b30889c548a ("SUNRPC: Ensure we always close the socket after
a connection shuts down"), and until commit c544577daddb ("SUNRPC: Clean up
transport write space handling"), it is possible for the NFS client to spin
in the following tight loop:

269.964083: rpc_task_run_action: task:43@0 flags=5a81 state=0005 status=0 action=call_bind [sunrpc]
269.964083: rpc_task_run_action: task:43@0 flags=5a81 state=0005 status=0 action=call_connect [sunrpc]
269.964083: rpc_task_run_action: task:43@0 flags=5a81 state=0005 status=0 action=call_transmit [sunrpc]
269.964085: xprt_transmit: peer=[10.0.1.82]:2049 xid=0x761d3f77 status=-32
269.964085: rpc_task_run_action: task:43@0 flags=5a81 state=0005 status=-32 action=call_transmit_status [sunrpc]
269.964085: rpc_task_run_action: task:43@0 flags=5a81 state=0005 status=-32 action=call_status [sunrpc]
269.964085: rpc_call_status: task:43@0 status=-32

The issue is that the path through call_transmit_status does not release
the XPRT_LOCK when the transmit result is -EPIPE, so the socket cannot be
properly shut down.

The below commit fixed things up in mainline by unconditionally calling
xprt_end_transmit() and releasing the XPRT_LOCK after every pass through
call_transmit.  However, the entirety of this commit is not appropriate for
stable kernels because its original inclusion was part of a series that
modifies the sunrpc code to use a different queueing model.  As a result,
there are machinations within this patch that are not needed for a stable
fix and will not make sense without a larger backport of the mainline
series.

In this patch, we take the slightly modified bit of the mainline patch
below, which is to release the XPRT_LOCK on transmission error should we
detect that the transport is waiting to close.

commit c544577daddb618c7dd5fa7fb98d6a41782f020e upstream
Author: Trond Myklebust <trond.myklebust@hammerspace.com>
Date:   Mon Sep 3 23:39:27 2018 -0400

    SUNRPC: Clean up transport write space handling

    Treat socket write space handling in the same way we now treat transport
    congestion: by denying the XPRT_LOCK until the transport signals that it
    has free buffer space.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The original discussion of the problem is here:

    https://lore.kernel.org/linux-nfs/20181212135157.4489-1-dwysocha@redhat.com/T/#t

This passes my usual cthon and xfstests on NFS as applied on v4.19 mainline.

Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Return error code from vmw_execbuf_copy_fence_user

commit 728354c005c36eaf44b6e5552372b67e60d17f56 upstream.

The function was unconditionally returning 0, and a caller would have to
rely on the returned fence pointer being NULL to detect errors. However,
the function vmw_execbuf_copy_fence_user() would expect a non-zero error
code in that case and would BUG otherwise.

So make sure we return a proper non-zero error code if the fence pointer
returned is NULL.

Cc: <stable@vger.kernel.org>
Fixes: ae2a104058e2: ("vmwgfx: Implement fence objects")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Fix setting of dma masks

commit 4cbfa1e6c09e98450aab3240e5119b0ab2c9795b upstream.

Previously we set only the dma mask and not the coherent mask. Fix that.
Also, for clarity, make sure both are initially set to 64 bits.

Cc: <stable@vger.kernel.org>
Fixes: 0d00c488f3de: ("drm/vmwgfx: Fix the driver for large dma addresses")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: always return something on DDI clock selection

commit 2a121030d4ee3f84f60c6f415f9c44bffbcde81d upstream.

Even if we don't have the correct clock and get a warning, we should not
skip the return.

v2: improve commit message (from Joonas)

Fixes: 1fa11ee2d9d0 ("drm/i915/icl: start adding the TBT pll")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125222444.19926-3-lucas.demarchi@intel.com
(cherry picked from commit 7a61a6dec3dfb9f2e8c39a337580a3c3036c5cdf)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/powerplay: Fix missing break in switch

commit 2f10d823739680d2477ce34437e8a08a53117f40 upstream.

Add missing break statement in order to prevent the code from falling
through to the default case.

The resoning for this is that pclk_vol_table is an automatic variable.
So, it makes no sense to update it just before falling through to the
default case and return -EINVAL.

This bug was found thanks to the ongoing efforts to enabling
-Wimplicit-fallthrough.

Fixes: cd70f3d6e3fa ("drm/amd/powerplay: PP/DAL interface changes for dynamic clock switch")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/modes: Prevent division by zero htotal

commit a2fcd5c84f7a7825e028381b10182439067aa90d upstream.

This patch prevents division by zero htotal.

In a follow-up mail Tina writes:

> > How did you manage to get here with htotal == 0? This needs backtraces (or if
> > this is just about static checkers, a mention of that).
> > -Daniel
>
> In GVT-g, we are trying to enable a virtual display w/o setting timings for a pipe
> (a.k.a htotal=0), then we met the following kernel panic:
>
> [   32.832048] divide error: 0000 [#1] SMP PTI
> [   32.833614] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc4-sriov+ #33
> [   32.834438] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.10.1-0-g8891697-dirty-20180511_165818-tinazhang-linux-1 04/01/2014
> [   32.835901] RIP: 0010:drm_mode_hsync+0x1e/0x40
> [   32.836004] Code: 31 c0 c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 8b 87 d8 00 00 00 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 f3 c3 66
> [   32.836004] RSP: 0000:ffffc900000ebb90 EFLAGS: 00010206
> [   32.836004] RAX: 0000000000000000 RBX: ffff88001c67c8a0 RCX: 0000000000000000
> [   32.836004] RDX: 0000000000000000 RSI: ffff88001c67c000 RDI: ffff88001c67c8a0
> [   32.836004] RBP: ffff88001c7d03a0 R08: ffff88001c67c8a0 R09: ffff88001c7d0330
> [   32.836004] R10: ffffffff822c3a98 R11: 0000000000000001 R12: ffff88001c67c000
> [   32.836004] R13: ffff88001c7d0370 R14: ffffffff8207eb78 R15: ffff88001c67c800
> [   32.836004] FS:  0000000000000000(0000) GS:ffff88001da00000(0000) knlGS:0000000000000000
> [   32.836004] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [   32.836004] CR2: 0000000000000000 CR3: 000000000220a000 CR4: 00000000000006f0
> [   32.836004] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [   32.836004] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [   32.836004] Call Trace:
> [   32.836004]  intel_mode_from_pipe_config+0x72/0x90
> [   32.836004]  intel_modeset_setup_hw_state+0x569/0xf90
> [   32.836004]  intel_modeset_init+0x905/0x1db0
> [   32.836004]  i915_driver_load+0xb8c/0x1120
> [   32.836004]  i915_pci_probe+0x4d/0xb0
> [   32.836004]  local_pci_probe+0x44/0xa0
> [   32.836004]  ? pci_assign_irq+0x27/0x130
> [   32.836004]  pci_device_probe+0x102/0x1c0
> [   32.836004]  driver_probe_device+0x2b8/0x480
> [   32.836004]  __driver_attach+0x109/0x110
> [   32.836004]  ? driver_probe_device+0x480/0x480
> [   32.836004]  bus_for_each_dev+0x67/0xc0
> [   32.836004]  ? klist_add_tail+0x3b/0x70
> [   32.836004]  bus_add_driver+0x1e8/0x260
> [   32.836004]  driver_register+0x5b/0xe0
> [   32.836004]  ? mipi_dsi_bus_init+0x11/0x11
> [   32.836004]  do_one_initcall+0x4d/0x1eb
> [   32.836004]  kernel_init_freeable+0x197/0x237
> [   32.836004]  ? rest_init+0xd0/0xd0
> [   32.836004]  kernel_init+0xa/0x110
> [   32.836004]  ret_from_fork+0x35/0x40
> [   32.836004] Modules linked in:
> [   32.859183] ---[ end trace 525608b0ed0e8665 ]---
> [   32.859722] RIP: 0010:drm_mode_hsync+0x1e/0x40
> [   32.860287] Code: 31 c0 c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 8b 87 d8 00 00 00 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 f3 c3 66
> [   32.862680] RSP: 0000:ffffc900000ebb90 EFLAGS: 00010206
> [   32.863309] RAX: 0000000000000000 RBX: ffff88001c67c8a0 RCX: 0000000000000000
> [   32.864182] RDX: 0000000000000000 RSI: ffff88001c67c000 RDI: ffff88001c67c8a0
> [   32.865206] RBP: ffff88001c7d03a0 R08: ffff88001c67c8a0 R09: ffff88001c7d0330
> [   32.866359] R10: ffffffff822c3a98 R11: 0000000000000001 R12: ffff88001c67c000
> [   32.867213] R13: ffff88001c7d0370 R14: ffffffff8207eb78 R15: ffff88001c67c800
> [   32.868075] FS:  0000000000000000(0000) GS:ffff88001da00000(0000) knlGS:0000000000000000
> [   32.868983] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [   32.869659] CR2: 0000000000000000 CR3: 000000000220a000 CR4: 00000000000006f0
> [   32.870599] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [   32.871598] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [   32.872549] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
>
> Since drm_mode_hsync() has the logic to check mode->htotal, I just extend it to cover the case htotal==0.

Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
[danvet: Add additional explanations + cc: stable.]
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1548228539-3061-1-git-send-email-tina.zhang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: ensure that mgmt tx skbs have tailroom for encryption

commit 9d0f50b80222dc273e67e4e14410fcfa4130a90c upstream.

Some drivers use IEEE80211_KEY_FLAG_SW_MGMT_TX to indicate that management
frames need to be software encrypted. Since normal data packets are still
encrypted by the hardware, crypto_tx_tailroom_needed_cnt gets decremented
after key upload to hw. This can lead to passing skbs to ccmp_encrypt_skb,
which don't have the necessary tailroom for software encryption.

Change the code to add tailroom for encrypted management packets, even if
crypto_tx_tailroom_needed_cnt is 0.

Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mic: vop: Fix use-after-free on remove

commit 70ed7148dadb812f2f7c9927e98ef3cf4869dfa9 upstream.

KASAN detects a use-after-free when vop devices are removed.

This problem was introduced by commit 0063e8bbd2b62d136 ("virtio_vop:
don't kfree device on register failure").  That patch moved the freeing
of the struct _vop_vdev to the release function, but failed to ensure
that vop holds a reference to the device when it doesn't want it to go
away.  A kfree() was replaced with a put_device() in the unregistration
path, but the last reference to the device is already dropped in
unregister_virtio_device() so the struct is freed before vop is done
with it.

Fix it by holding a reference until cleanup is done.  This is similar to
the fix in virtio_pci in commit 2989be09a8a9d6 ("virtio_pci: fix use
after free on release").

 ==================================================================
 BUG: KASAN: use-after-free in vop_scan_devices+0xc6c/0xe50 [vop]
 Read of size 8 at addr ffff88800da18580 by task kworker/0:1/12

 CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.0.0-rc4+ #53
 Workqueue: events vop_hotplug_devices [vop]
 Call Trace:
  dump_stack+0x74/0xbb
  print_address_description+0x5d/0x2b0
  ? vop_scan_devices+0xc6c/0xe50 [vop]
  kasan_report+0x152/0x1aa
  ? vop_scan_devices+0xc6c/0xe50 [vop]
  ? vop_scan_devices+0xc6c/0xe50 [vop]
  vop_scan_devices+0xc6c/0xe50 [vop]
  ? vop_loopback_free_irq+0x160/0x160 [vop_loopback]
  process_one_work+0x7c0/0x14b0
  ? pwq_dec_nr_in_flight+0x2d0/0x2d0
  ? do_raw_spin_lock+0x120/0x280
  worker_thread+0x8f/0xbf0
  ? __kthread_parkme+0x78/0xf0
  ? process_one_work+0x14b0/0x14b0
  kthread+0x2ae/0x3a0
  ? kthread_park+0x120/0x120
  ret_from_fork+0x3a/0x50

 Allocated by task 12:
  kmem_cache_alloc_trace+0x13a/0x2a0
  vop_scan_devices+0x473/0xe50 [vop]
  process_one_work+0x7c0/0x14b0
  worker_thread+0x8f/0xbf0
  kthread+0x2ae/0x3a0
  ret_from_fork+0x3a/0x50

 Freed by task 12:
  kfree+0x104/0x310
  device_release+0x73/0x1d0
  kobject_put+0x14f/0x420
  unregister_virtio_device+0x32/0x50
  vop_scan_devices+0x19d/0xe50 [vop]
  process_one_work+0x7c0/0x14b0
  worker_thread+0x8f/0xbf0
  kthread+0x2ae/0x3a0
  ret_from_fork+0x3a/0x50

 The buggy address belongs to the object at ffff88800da18008
  which belongs to the cache kmalloc-2k of size 2048
 The buggy address is located 1400 bytes inside of
  2048-byte region [ffff88800da18008, ffff88800da18808)
 The buggy address belongs to the page:
 page:ffffea0000368600 count:1 mapcount:0 mapping:ffff88801440dbc0 index:0x0 compound_mapcount: 0
 flags: 0x4000000000010200(slab|head)
 raw: 4000000000010200 ffffea0000378608 ffffea000037a008 ffff88801440dbc0
 raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  ffff88800da18480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff88800da18500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 >ffff88800da18580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                    ^
  ffff88800da18600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff88800da18680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ==================================================================

Fixes: 0063e8bbd2b62d136 ("virtio_vop: don't kfree device on register failure")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/radix: Fix kernel crash with mremap()

commit 579b9239c1f38665b21e8d0e6ee83ecc96dbd6bb upstream.

With support for split pmd lock, we use pmd page pmd_huge_pte pointer
to store the deposited page table. In those config when we move page
tables we need to make sure we move the deposited page table to the
correct pmd page. Otherwise this can result in crash when we withdraw
of deposited page table because we can find the pmd_huge_pte NULL.

eg:

  __split_huge_pmd+0x1070/0x1940
  __split_huge_pmd+0xe34/0x1940 (unreliable)
  vma_adjust_trans_huge+0x110/0x1c0
  __vma_adjust+0x2b4/0x9b0
  __split_vma+0x1b8/0x280
  __do_munmap+0x13c/0x550
  sys_mremap+0x220/0x7e0
  system_call+0x5c/0x70

Fixes: 675d995297d4 ("powerpc/book3s64: Enable split pmd ptlock.")
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: arm_scmi: provide the mandatory device release callback

commit 46edb8d1322c1763dd04e179992f8e9996085047 upstream.

The device/driver model clearly mandates that bus driver that discover
and allocate the device must set the release callback. This callback
will be used to free the device after all references have gone away.

scmi bus driver is missing the obvious callback which will result in
the following warning if the device is unregistered:

Device 'scmi_dev.1' does not have a release() function, it is broken and
must be fixed. See Documentation/kobject.txt.
WARNING at drivers/base/core.c:922 device_release+0x8c/0xa0
Hardware name: ARM LTD Juno Development Platform BIOS EDK II Jan 21 2019
Workqueue: events deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : device_release+0x8c/0xa0
lr : device_release+0x8c/0xa0
Call trace:
 device_release+0x8c/0xa0
 kobject_put+0x8c/0x208
 device_unregister+0x30/0x78
 scmi_device_destroy+0x28/0x50
 scmi_probe+0x354/0x5b0
 platform_drv_probe+0x58/0xa8
 really_probe+0x2c4/0x3e8
 driver_probe_device+0x12c/0x148
 __device_attach_driver+0xac/0x150
 bus_for_each_drv+0x78/0xd8
 __device_attach+0xe0/0x168
 device_initial_probe+0x24/0x30
 bus_probe_device+0xa0/0xa8
 deferred_probe_work_func+0x8c/0xe0
 process_one_work+0x1f0/0x478
 worker_thread+0x22c/0x450
 kthread+0x134/0x138
 ret_from_fork+0x10/0x1c
---[ end trace 420bdb7f6af50937 ]---

Fix the issue by providing scmi_device_release callback. We have
everything required for device release already in scmi_device_destroy,
so we just need to move freeing of the device to scmi_device_release.

Fixes: 933c504424a2 ("firmware: arm_scmi: add scmi protocol bus to enumerate protocol devices")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org # 4.17+
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: da850: fix interrupt numbers for clocksource

commit e3966a766865da7ced1dece663697861dd5cf103 upstream.

The timer interrupts specified in commit 3652e2741f42 ("ARM: dts:
da850: Add clocks") are wrong but since the current timer code
hard-codes them, the bug was never spotted.

This patch must go into stable since, once we introduce a proper
clocksource driver, devices with buggy device tree will stop booting.

Fixes: 3652e2741f42 ("ARM: dts: da850: Add clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: tango: Improve ARCH_MULTIPLATFORM compatibility

commit d0f9f16788e15d9eb40f68b047732d49658c5a3a upstream.

Calling platform-specific code unconditionally blows up when running
an ARCH_MULTIPLATFORM kernel on a different platform. Don't do it.

Reported-by: Paolo Pisati <p.pisati@gmail.com>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: stable@vger.kernel.org # v4.8+
Fixes: a30eceb7a59d ("ARM: tango: add Suspend-to-RAM support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: iop32x/n2100: fix PCI IRQ mapping

commit db4090920ba2d61a5827a23e441447926a02ffee upstream.

Booting 4.20 on a TheCUS N2100 results in a kernel oops while probing
PCI, due to n2100_pci_map_irq() having been discarded during boot.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: stable@vger.kernel.org # 2.6.18+
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: VDSO: Include $(ccflags-vdso) in o32,n32 .lds builds

commit 67fc5dc8a541e8f458d7f08bf88ff55933bf9f9d upstream.

When generating vdso-o32.lds & vdso-n32.lds for use with programs
running as compat ABIs under 64b kernels, we previously haven't included
the compiler flags that are supposedly common to all ABIs - ie. those in
the ccflags-vdso variable.

This is problematic in cases where we need to provide the -m%-float flag
in order to ensure that we don't attempt to use a floating point ABI
that's incompatible with the target CPU & ABI. For example a toolchain
using current gcc trunk configured --with-fp-32=xx fails to build a
64r6el_defconfig kernel with the following error:

  cc1: error: '-march=mips1' requires '-mfp32'
  make[2]: *** [arch/mips/vdso/Makefile:135: arch/mips/vdso/vdso-o32.lds] Error 1

Include $(ccflags-vdso) for the compat VDSO .lds builds, just as it is
included for the native VDSO .lds & when compiling objects for the
compat VDSOs. This ensures we consistently provide the -msoft-float flag
amongst others, avoiding the problem by ensuring we're agnostic to the
toolchain defaults.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Cc: linux-mips@vger.kernel.org
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Maciej W . Rozycki <macro@linux-mips.org>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips: loongson64: remove unreachable(), fix loongson_poweroff().

commit 8a96669d77897ff3613157bf43f875739205d66d upstream.

On my Yeeloong 8089, I noticed the machine fails to shutdown
properly, and often, the function mach_prepare_reboot() is
unexpectedly executed, thus the machine reboots instead. A
wait loop is needed to ensure the system is in a well-defined
state before going down.

In commit 997e93d4df16 ("MIPS: Hang more efficiently on
halt/powerdown/restart"), a general superset of the wait loop for all
platforms is already provided, so we don't need to implement our own.

This commit simply removes the unreachable() compiler marco after
mach_prepare_reboot(), thus allowing the execution of machine_hang().
My test shows that the machine is now able to shutdown successfully.

Please note that there are two different bugs preventing the machine
from shutting down, another work-in-progress commit is needed to
fix a lockup in cpufreq / i8259 driver, please read Reference, this
commit does not fix that bug.

Reference: https://lkml.org/lkml/2019/2/5/908
Signed-off-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: VDSO: Use same -m%-float cflag as the kernel proper

commit 0648e50e548d881d025b9419a1a168753c8e2bf7 upstream.

The MIPS VDSO build currently doesn't provide the -msoft-float flag to
the compiler as the kernel proper does. This results in an attempt to
use the compiler's default floating point configuration, which can be
problematic in cases where this is incompatible with the target CPU's
-march= flag. For example decstation_defconfig fails to build using
toolchains in which gcc was configured --with-fp-32=xx with the
following error:

    LDS     arch/mips/vdso/vdso.lds
  cc1: error: '-march=r3000' requires '-mfp32'
  make[2]: *** [scripts/Makefile.build:379: arch/mips/vdso/vdso.lds] Error 1

The kernel proper avoids this error because we build with the
-msoft-float compiler flag, rather than using the compiler's default.
Pass this flag through to the VDSO build so that it too becomes agnostic
to the toolchain's floating point configuration.

Note that this is filtered out from KBUILD_CFLAGS rather than simply
always using -msoft-float such that if we switch the kernel to use
-mno-float in the future the VDSO will automatically inherit the change.

The VDSO doesn't actually include any floating point code, and its
.MIPS.abiflags section is already manually generated to specify that
it's compatible with any floating point ABI. As such this change should
have no effect on the resulting VDSO, apart from fixing the build
failure for affected toolchains.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Kevin Hilman <khilman@baylibre.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Kevin Hilman <khilman@baylibre.com>
References: https://lore.kernel.org/linux-mips/1477843551-21813-1-git-send-email-linux@roeck-us.net/
References: https://kernelci.org/build/id/5c4e4ae059b5142a249ad004/logs/
Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: OCTEON: don't set octeon_dma_bar_type if PCI is disabled

commit dcf300a69ac307053dfb35c2e33972e754a98bce upstream.

Don't set octeon_dma_bar_type if PCI is disabled. This avoids creation
of the MSI irqchip later on, and saves a bit of memory.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: a214720cbf50 ("Disable MSI also when pcie-octeon.pcie_disable on")
Cc: stable@vger.kernel.org # v3.3+
Cc: linux-mips@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips: cm: reprime error cause

commit 05dc6001af0630e200ad5ea08707187fe5537e6d upstream.

Accordingly to the documentation
---cut---
The GCR_ERROR_CAUSE.ERR_TYPE field and the GCR_ERROR_MULT.ERR_TYPE
fields can be cleared by either a reset or by writing the current
value of GCR_ERROR_CAUSE.ERR_TYPE to the
GCR_ERROR_CAUSE.ERR_TYPE register.
---cut---
Do exactly this. Original value of cm_error may be safely written back;
it clears error cause and keeps other bits untouched.

Fixes: 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@linux.intel.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: uprobes: Fix typo in pr_fmt string

commit ea6eb5e7d15e1838de335609994b4546e2abcaaf upstream.

The subsystem-specific message prefix for uprobes was also
"trace_kprobe: " instead of "trace_uprobe: " as described in
the original commit message.

Link: http://lkml.kernel.org/r/20190117133023.19292-1-andreas.ziegler@fau.de
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 7257634135c24 ("tracing/probe: Show subsystem name in messages")
Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: cherryview: fix Strago DMI workaround

commit e3f72b749da2bf63bed7409e416f160418d475b6 upstream.

Well, hopefully 3rd time is a charm. We tried making that check
DMI_BIOS_VERSION and DMI_BOARD_VERSION, but the real one is
DMI_PRODUCT_VERSION.

Fixes: 86c5dd6860a6 ("pinctrl: cherryview: limit Strago DMI workarounds to version 1.0")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197953
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1631930
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: sunxi: Correct number of IRQ banks on H6 main pin controller

commit 10098709b4ee6f6f19f25ba81d9c6f83518c584c upstream.

The H6 main pin controller has four banks of interrupt-triggering pins.
The driver as originally submitted only specified three, but had pin
descriptions referencing a fourth bank. This results in a out-of-bounds
access into .irq_array of struct sunxi_pinctrl. This however did not
result in a crash until v4.20, with commit a66d972465d1 ("devres: Align
data[] to ARCH_KMALLOC_MINALIGN"), which changed the alignment of memory
region returned by devm_kcalloc(). The increase likely moved the
out-of-bounds access into the next, unmapped page.

With KASAN on, the bug is quite clear:

    BUG: KASAN: slab-out-of-bounds in sunxi_pinctrl_init_with_variant+0x49c/0x12b8
    Write of size 4 at addr ffff80002c680280 by task swapper/0/1

    CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc1-00016-gc480a5e6a077 #3
    Hardware name: OrangePi Lite2 (DT)
    Call trace:
     dump_backtrace+0x0/0x220
     show_stack+0x14/0x20
     dump_stack+0xac/0xd4
     print_address_description+0x60/0x25c
     kasan_report+0x14c/0x1ac
     __asan_store4+0x80/0xa0
     sunxi_pinctrl_init_with_variant+0x49c/0x12b8
     h6_pinctrl_probe+0x18/0x20
     platform_drv_probe+0x6c/0xc8
     really_probe+0x244/0x4b0
     driver_probe_device.part.4+0x11c/0x164
     __driver_attach+0x120/0x190
     bus_for_each_dev+0xe8/0x158
     driver_attach+0x30/0x40
     bus_add_driver+0x308/0x318
     driver_register+0xbc/0x1d0
     __platform_driver_register+0x7c/0x88
     h6_pinctrl_driver_init+0x18/0x20
     do_one_initcall+0xd4/0x208
     kernel_init_freeable+0x230/0x2c8
     kernel_init+0x10/0x108
     ret_from_fork+0x10/0x1c

    Allocated by task 1:
     kasan_kmalloc.part.0+0x4c/0x100
     kasan_kmalloc+0xc4/0xe8
     kasan_slab_alloc+0x14/0x20
     __kmalloc_track_caller+0x130/0x238
     devm_kmalloc+0x34/0xd0
     sunxi_pinctrl_init_with_variant+0x1d8/0x12b8
     h6_pinctrl_probe+0x18/0x20
     platform_drv_probe+0x6c/0xc8
     really_probe+0x244/0x4b0
     driver_probe_device.part.4+0x11c/0x164
     __driver_attach+0x120/0x190
     bus_for_each_dev+0xe8/0x158
     driver_attach+0x30/0x40
     bus_add_driver+0x308/0x318
     driver_register+0xbc/0x1d0
     __platform_driver_register+0x7c/0x88
     h6_pinctrl_driver_init+0x18/0x20
     do_one_initcall+0xd4/0x208
     kernel_init_freeable+0x230/0x2c8
     kernel_init+0x10/0x108
     ret_from_fork+0x10/0x1c

    Freed by task 0:
    (stack is not available)

    The buggy address belongs to the object at ffff80002c680080
     which belongs to the cache kmalloc-512 of size 512
    The buggy address is located 0 bytes to the right of
     512-byte region [ffff80002c680080, ffff80002c680280)
    The buggy address belongs to the page:
    page:ffff7e0000b1a000 count:1 mapcount:0 mapping:ffff80002e00c780 index:0xffff80002c683c80 compound_mapcount: 0
    flags: 0x10200(slab|head)
    raw: 0000000000010200 ffff80002e003a10 ffff80002e003a10 ffff80002e00c780
    raw: ffff80002c683c80 0000000000100001 00000001ffffffff 0000000000000000
    page dumped because: kasan: bad access detected

    Memory state around the buggy address:
     ffff80002c680180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
     ffff80002c680200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    >ffff80002c680280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
       ^
     ffff80002c680300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
     ffff80002c680380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Correct the number of IRQ banks so there are no more mismatches.

Fixes: c8a830904991 ("pinctrl: sunxi: add support for the Allwinner H6 main pin controller")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

debugfs: fix debugfs_rename parameter checking

commit d88c93f090f708c18195553b352b9f205e65418f upstream.

debugfs_rename() needs to check that the dentries passed into it really
are valid, as sometimes they are not (i.e. if the return value of
another debugfs call is passed into this one.)  So fix this up by
properly checking if the two parent directories are errors (they are
allowed to be NULL), and if the dentry to rename is not NULL or an
error.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

samples: mei: use /dev/mei0 instead of /dev/mei

commit c4a46acf1db3ce547d290c29e55b3476c78dd76c upstream.

The device was moved from misc device to character devices
to support multiple mei devices.

Cc: <stable@vger.kernel.org> #v4.9+
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: add ice lake point device id.

commit efe814e90b98aed6d655b5a4092b9114b8b26e42 upstream.

Add icelake mei device id.

Cc: <stable@vger.kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: vexpress: Off by one in vexpress_syscfg_exec()

commit f8a70d8b889f180e6860cb1f85fed43d37844c5a upstream.

The > comparison should be >= to prevent reading beyond the end of the
func->template[] array.

(The func->template array is allocated in vexpress_syscfg_regmap_init()
and it has func->num_templates elements.)

Fixes: 974cc7b93441 ("mfd: vexpress: Define the device as MFD cells")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

signal: Better detection of synchronous signals

commit 7146db3317c67b517258cb5e1b08af387da0618b upstream.

Recently syzkaller was able to create unkillablle processes by
creating a timer that is delivered as a thread local signal on SIGHUP,
and receiving SIGHUP SA_NODEFERER.  Ultimately causing a loop failing
to deliver SIGHUP but always trying.

When the stack overflows delivery of SIGHUP fails and force_sigsegv is
called.  Unfortunately because SIGSEGV is numerically higher than
SIGHUP next_signal tries again to deliver a SIGHUP.

From a quality of implementation standpoint attempting to deliver the
timer SIGHUP signal is wrong.  We should attempt to deliver the
synchronous SIGSEGV signal we just forced.

We can make that happening in a fairly straight forward manner by
instead of just looking at the signal number we also look at the
si_code.  In particular for exceptions (aka synchronous signals) the
si_code is always greater than 0.

That still has the potential to pick up a number of asynchronous
signals as in a few cases the same si_codes that are used
for synchronous signals are also used for asynchronous signals,
and SI_KERNEL is also included in the list of possible si_codes.

Still the heuristic is much better and timer signals are definitely
excluded.  Which is enough to prevent all known ways for someone
sending a process signals fast enough to cause unexpected and
arguably incorrect behavior.

Cc: stable@vger.kernel.org
Fixes: a27341cd5fcb ("Prioritize synchronous signals over 'normal' signals")
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

signal: Always notice exiting tasks

commit 35634ffa1751b6efd8cf75010b509dcb0263e29b upstream.

Recently syzkaller was able to create unkillablle processes by
creating a timer that is delivered as a thread local signal on SIGHUP,
and receiving SIGHUP SA_NODEFERER.  Ultimately causing a loop
failing to deliver SIGHUP but always trying.

Upon examination it turns out part of the problem is actually most of
the solution.  Since 2.5 signal delivery has found all fatal signals,
marked the signal group for death, and queued SIGKILL in every threads
thread queue relying on signal->group_exit_code to preserve the
information of which was the actual fatal signal.

The conversion of all fatal signals to SIGKILL results in the
synchronous signal heuristic in next_signal kicking in and preferring
SIGHUP to SIGKILL.  Which is especially problematic as all
fatal signals have already been transformed into SIGKILL.

Instead of dequeueing signals and depending upon SIGKILL to
be the first signal dequeued, first test if the signal group
has already been marked for death.  This guarantees that
nothing in the signal queue can prevent a process that needs
to exit from exiting.

Cc: stable@vger.kernel.org
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Ref: ebf5ebe31d2c ("[PATCH] signal-fixes-2.5.59-A4")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ti-ads8688: Update buffer allocation for timestamps

commit f214ff521fb1f861c8d7f7d0af98b06bf61b3369 upstream.

Per Jonathan Cameron, the buffer needs to allocate room for a
64 bit timestamp as well as the channels.  Change the buffer
to allocate this additional space.

Fixes: 2a86487786b5c ("iio: adc: ti-ads8688: add trigger and buffer support")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius

commit 0808831dc62e90023ad14ff8da4804c7846e904b upstream.

IIO_TEMP scale value for temperature was incorrect and not in millicelsius
as required by the ABI documentation.

Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Fixes: 27dec00ecf2d (iio: chemical: add Atlas pH-SM sensor support)
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: axp288: Fix TS-pin handling

commit 9bcf15f75cac3c6a00d8f8083a635de9c8537799 upstream.

Prior to this commit there were 3 issues with our handling of the TS-pin:

1) There are 2 ways how the firmware can disable monitoring of the TS-pin
for designs which do not have a temperature-sensor for the battery:
a) Clearing bit 0 of the AXP20X_ADC_EN1 register
b) Setting bit 2 of the AXP288_ADC_TS_PIN_CTRL monitoring

Prior to this commit we were unconditionally setting both bits to the
value used on devices with a TS. This causes the temperature protection to
kick in on devices without a TS, such as the Jumper ezbook v2, causing
them to not charge under Linux.

This commit fixes this by using regmap_update_bits when updating these 2
registers, leaving the 2 mentioned bits alone.

The next 2 problems are related to our handling of the current-source
for the TS-pin. The current-source used for the battery temp-sensor (TS)
is shared with the GPADC. For proper fuel-gauge and charger operation the
TS current-source needs to be permanently on. But to read the GPADC we
need to temporary switch the TS current-source to ondemand, so that the
GPADC can use it, otherwise we will always read an all 0 value.

2) Problem 2 is we were writing hardcoded values to the ADC TS pin-ctrl
register, overwriting various other unrelated bits. Specifically we were
overwriting the current-source setting for the TS and GPIO0 pins, forcing
it to 80ųA independent of its original setting. On a Chuwi Vi10 tablet
this was causing us to get a too high adc value (due to a too high
current-source) resulting in the following errors being logged:

ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion]
ACPI Error: Method parse/execution failed \_SB.SXP1._TMP, AE_ERROR

This commit fixes this by using regmap_update_bits to change only the
relevant bits.

3) After reading the GPADC channel we were unconditionally enabling the
TS current-source even on devices where the TS-pin is not used and the
current-source thus was off before axp288_adc_read_raw call.

This commit fixes this by making axp288_adc_set_ts a nop on devices where
the ADC is not enabled for the TS-pin.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1610545
Fixes: 3091141d7803 ("iio: adc: axp288: Fix the GPADC pin ...")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools: iio: iio_generic_buffer: make num_loops signed

commit b119d3bc328e7a9574861ebe0c2110e2776c2de1 upstream.

Currently, num_loops is unsigned, but it's set by strtoll, which returns a
(signed) long long int. This could lead to overflow, and it also makes the
check "num_loops < 0" always be false, since num_loops is unsigned.
Setting num_loops to -1 to loop forever is almost working because num_loops
is getting set to a very high number, but it's technically still incorrect.

Fix this issue by making num_loops signed. This also fixes an error found
by Smatch.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 55dda0abcf9d ("tools: iio: iio_generic_buffer: allow continuous looping")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: Add NOLPM quirk for SAMSUNG MZ7TE512HMHP-000L1 SSD

commit dd957493baa586f1431490f97f9c7c45eaf8ab10 upstream.

We've received a bugreport that using LPM with a SAMSUNG
MZ7TE512HMHP-000L1 SSD leads to system instability, we already have
a quirk for the MZ7TD256HAFV-000L9, which is also a Samsun EVO 840 /
PM851 OEM model, so it seems some of these models have a LPM issue.

This commits adds a NOLPM quirk for the model string from the new
bugeport, to avoid the reported stability issues.

Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1571330
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>