Yu Zhao [Sun, 18 Sep 2022 08:00:05 +0000 (02:00 -0600)]
mm: multi-gen LRU: support page table walks
To further exploit spatial locality, the aging prefers to walk page tables
to search for young PTEs and promote hot pages. A kill switch will be
added in the next patch to disable this behavior. When disabled, the
aging relies on the rmap only.
NB: this behavior has nothing similar with the page table scanning in the
2.4 kernel [1], which searches page tables for old PTEs, adds cold pages
to swapcache and unmaps them.
To avoid confusion, the term "iteration" specifically means the traversal
of an entire mm_struct list; the term "walk" will be applied to page
tables and the rmap, as usual.
An mm_struct list is maintained for each memcg, and an mm_struct follows
its owner task to the new memcg when this task is migrated. Given an
lruvec, the aging iterates lruvec_memcg()->mm_list and calls
walk_page_range() with each mm_struct on this list to promote hot pages
before it increments max_seq.
When multiple page table walkers iterate the same list, each of them gets
a unique mm_struct; therefore they can run concurrently. Page table
walkers ignore any misplaced pages, e.g., if an mm_struct was migrated,
pages it left in the previous memcg will not be promoted when its current
memcg is under reclaim. Similarly, page table walkers will not promote
pages from nodes other than the one under reclaim.
This patch uses the following optimizations when walking page tables:
1. It tracks the usage of mm_struct's between context switches so that
page table walkers can skip processes that have been sleeping since
the last iteration.
2. It uses generational Bloom filters to record populated branches so
that page table walkers can reduce their search space based on the
query results, e.g., to skip page tables containing mostly holes or
misplaced pages.
3. It takes advantage of the accessed bit in non-leaf PMD entries when
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y.
4. It does not zigzag between a PGD table and the same PMD table
spanning multiple VMAs. IOW, it finishes all the VMAs within the
range of the same PMD table before it returns to a PGD table. This
improves the cache performance for workloads that have large
numbers of tiny VMAs [2], especially when CONFIG_PGTABLE_LEVELS=5.
Server benchmark results:
Single workload:
fio (buffered I/O): no change
Single workload:
memcached (anon): +[8, 10]%
Ops/sec KB/sec
patch1-7: 1147696.57 44640.29
patch1-8: 1245274.91 48435.66
Configurations:
no change
Client benchmark results:
kswapd profiles:
patch1-7
48.16% lzo1x_1_do_compress (real work)
8.20% page_vma_mapped_walk (overhead)
7.06% _raw_spin_unlock_irq
2.92% ptep_clear_flush
2.53% __zram_bvec_write
2.11% do_raw_spin_lock
2.02% memmove
1.93% lru_gen_look_around
1.56% free_unref_page_list
1.40% memset
patch1-8
49.44% lzo1x_1_do_compress (real work)
6.19% page_vma_mapped_walk (overhead)
5.97% _raw_spin_unlock_irq
3.13% get_pfn_folio
2.85% ptep_clear_flush
2.42% __zram_bvec_write
2.08% do_raw_spin_lock
1.92% memmove
1.44% alloc_zspage
1.36% memset
Configurations:
no change
Thanks to the following developers for their efforts [3].
kernel test robot <lkp@intel.com>
[1] https://lwn.net/Articles/23732/
[2] https://llvm.org/docs/ScudoHardenedAllocator.html
[3] https://lore.kernel.org/r/
202204160827.ekEARWQo-lkp@intel.com/
Link: https://lkml.kernel.org/r/20220918080010.2920238-9-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yu Zhao [Sun, 18 Sep 2022 08:00:04 +0000 (02:00 -0600)]
mm: multi-gen LRU: exploit locality in rmap
Searching the rmap for PTEs mapping each page on an LRU list (to test and
clear the accessed bit) can be expensive because pages from different VMAs
(PA space) are not cache friendly to the rmap (VA space). For workloads
mostly using mapped pages, searching the rmap can incur the highest CPU
cost in the reclaim path.
This patch exploits spatial locality to reduce the trips into the rmap.
When shrink_page_list() walks the rmap and finds a young PTE, a new
function lru_gen_look_around() scans at most BITS_PER_LONG-1 adjacent
PTEs. On finding another young PTE, it clears the accessed bit and
updates the gen counter of the page mapped by this PTE to
(max_seq%MAX_NR_GENS)+1.
Server benchmark results:
Single workload:
fio (buffered I/O): no change
Single workload:
memcached (anon): +[3, 5]%
Ops/sec KB/sec
patch1-6: 1106168.46 43025.04
patch1-7: 1147696.57 44640.29
Configurations:
no change
Client benchmark results:
kswapd profiles:
patch1-6
39.03% lzo1x_1_do_compress (real work)
18.47% page_vma_mapped_walk (overhead)
6.74% _raw_spin_unlock_irq
3.97% do_raw_spin_lock
2.49% ptep_clear_flush
2.48% anon_vma_interval_tree_iter_first
1.92% folio_referenced_one
1.88% __zram_bvec_write
1.48% memmove
1.31% vma_interval_tree_iter_next
patch1-7
48.16% lzo1x_1_do_compress (real work)
8.20% page_vma_mapped_walk (overhead)
7.06% _raw_spin_unlock_irq
2.92% ptep_clear_flush
2.53% __zram_bvec_write
2.11% do_raw_spin_lock
2.02% memmove
1.93% lru_gen_look_around
1.56% free_unref_page_list
1.40% memset
Configurations:
no change
Link: https://lkml.kernel.org/r/20220918080010.2920238-8-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Barry Song <baohua@kernel.org>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yu Zhao [Sun, 18 Sep 2022 08:00:03 +0000 (02:00 -0600)]
mm: multi-gen LRU: minimal implementation
To avoid confusion, the terms "promotion" and "demotion" will be applied
to the multi-gen LRU, as a new convention; the terms "activation" and
"deactivation" will be applied to the active/inactive LRU, as usual.
The aging produces young generations. Given an lruvec, it increments
max_seq when max_seq-min_seq+1 approaches MIN_NR_GENS. The aging promotes
hot pages to the youngest generation when it finds them accessed through
page tables; the demotion of cold pages happens consequently when it
increments max_seq. Promotion in the aging path does not involve any LRU
list operations, only the updates of the gen counter and
lrugen->nr_pages[]; demotion, unless as the result of the increment of
max_seq, requires LRU list operations, e.g., lru_deactivate_fn(). The
aging has the complexity O(nr_hot_pages), since it is only interested in
hot pages.
The eviction consumes old generations. Given an lruvec, it increments
min_seq when lrugen->lists[] indexed by min_seq%MAX_NR_GENS becomes empty.
A feedback loop modeled after the PID controller monitors refaults over
anon and file types and decides which type to evict when both types are
available from the same generation.
The protection of pages accessed multiple times through file descriptors
takes place in the eviction path. Each generation is divided into
multiple tiers. A page accessed N times through file descriptors is in
tier order_base_2(N). Tiers do not have dedicated lrugen->lists[], only
bits in folio->flags. The aforementioned feedback loop also monitors
refaults over all tiers and decides when to protect pages in which tiers
(N>1), using the first tier (N=0,1) as a baseline. The first tier
contains single-use unmapped clean pages, which are most likely the best
choices. In contrast to promotion in the aging path, the protection of a
page in the eviction path is achieved by moving this page to the next
generation, i.e., min_seq+1, if the feedback loop decides so. This
approach has the following advantages:
1. It removes the cost of activation in the buffered access path by
inferring whether pages accessed multiple times through file
descriptors are statistically hot and thus worth protecting in the
eviction path.
2. It takes pages accessed through page tables into account and avoids
overprotecting pages accessed multiple times through file
descriptors. (Pages accessed through page tables are in the first
tier, since N=0.)
3. More tiers provide better protection for pages accessed more than
twice through file descriptors, when under heavy buffered I/O
workloads.
Server benchmark results:
Single workload:
fio (buffered I/O): +[30, 32]%
IOPS BW
5.19-rc1: 2673k 10.2GiB/s
patch1-6: 3491k 13.3GiB/s
Single workload:
memcached (anon): -[4, 6]%
Ops/sec KB/sec
5.19-rc1: 1161501.04 45177.25
patch1-6: 1106168.46 43025.04
Configurations:
CPU: two Xeon 6154
Mem: total 256G
Node 1 was only used as a ram disk to reduce the variance in the
results.
patch drivers/block/brd.c <<EOF
99,100c99,100
< gfp_flags = GFP_NOIO | __GFP_ZERO | __GFP_HIGHMEM;
< page = alloc_page(gfp_flags);
---
> gfp_flags = GFP_NOIO | __GFP_ZERO | __GFP_HIGHMEM | __GFP_THISNODE;
> page = alloc_pages_node(1, gfp_flags, 0);
EOF
cat >>/etc/systemd/system.conf <<EOF
CPUAffinity=numa
NUMAPolicy=bind
NUMAMask=0
EOF
cat >>/etc/memcached.conf <<EOF
-m 184320
-s /var/run/memcached/memcached.sock
-a 0766
-t 36
-B binary
EOF
cat fio.sh
modprobe brd rd_nr=1 rd_size=
113246208
swapoff -a
mkfs.ext4 /dev/ram0
mount -t ext4 /dev/ram0 /mnt
mkdir /sys/fs/cgroup/user.slice/test
echo
38654705664 >/sys/fs/cgroup/user.slice/test/memory.max
echo $$ >/sys/fs/cgroup/user.slice/test/cgroup.procs
fio -name=mglru --numjobs=72 --directory=/mnt --size=1408m \
--buffered=1 --ioengine=io_uring --iodepth=128 \
--iodepth_batch_submit=32 --iodepth_batch_complete=32 \
--rw=randread --random_distribution=random --norandommap \
--time_based --ramp_time=10m --runtime=5m --group_reporting
cat memcached.sh
modprobe brd rd_nr=1 rd_size=
113246208
swapoff -a
mkswap /dev/ram0
swapon /dev/ram0
memtier_benchmark -S /var/run/memcached/memcached.sock \
-P memcache_binary -n allkeys --key-minimum=1 \
--key-maximum=
65000000 --key-pattern=P:P -c 1 -t 36 \
--ratio 1:0 --pipeline 8 -d 2000
memtier_benchmark -S /var/run/memcached/memcached.sock \
-P memcache_binary -n allkeys --key-minimum=1 \
--key-maximum=
65000000 --key-pattern=R:R -c 1 -t 36 \
--ratio 0:1 --pipeline 8 --randomize --distinct-client-seed
Client benchmark results:
kswapd profiles:
5.19-rc1
40.33% page_vma_mapped_walk (overhead)
21.80% lzo1x_1_do_compress (real work)
7.53% do_raw_spin_lock
3.95% _raw_spin_unlock_irq
2.52% vma_interval_tree_iter_next
2.37% folio_referenced_one
2.28% vma_interval_tree_subtree_search
1.97% anon_vma_interval_tree_iter_first
1.60% ptep_clear_flush
1.06% __zram_bvec_write
patch1-6
39.03% lzo1x_1_do_compress (real work)
18.47% page_vma_mapped_walk (overhead)
6.74% _raw_spin_unlock_irq
3.97% do_raw_spin_lock
2.49% ptep_clear_flush
2.48% anon_vma_interval_tree_iter_first
1.92% folio_referenced_one
1.88% __zram_bvec_write
1.48% memmove
1.31% vma_interval_tree_iter_next
Configurations:
CPU: single Snapdragon 7c
Mem: total 4G
ChromeOS MemoryPressure [1]
[1] https://chromium.googlesource.com/chromiumos/platform/tast-tests/
Link: https://lkml.kernel.org/r/20220918080010.2920238-7-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yu Zhao [Sun, 18 Sep 2022 08:00:02 +0000 (02:00 -0600)]
mm: multi-gen LRU: groundwork
Evictable pages are divided into multiple generations for each lruvec.
The youngest generation number is stored in lrugen->max_seq for both
anon and file types as they are aged on an equal footing. The oldest
generation numbers are stored in lrugen->min_seq[] separately for anon
and file types as clean file pages can be evicted regardless of swap
constraints. These three variables are monotonically increasing.
Generation numbers are truncated into order_base_2(MAX_NR_GENS+1) bits
in order to fit into the gen counter in folio->flags. Each truncated
generation number is an index to lrugen->lists[]. The sliding window
technique is used to track at least MIN_NR_GENS and at most
MAX_NR_GENS generations. The gen counter stores a value within [1,
MAX_NR_GENS] while a page is on one of lrugen->lists[]. Otherwise it
stores 0.
There are two conceptually independent procedures: "the aging", which
produces young generations, and "the eviction", which consumes old
generations. They form a closed-loop system, i.e., "the page reclaim".
Both procedures can be invoked from userspace for the purposes of working
set estimation and proactive reclaim. These techniques are commonly used
to optimize job scheduling (bin packing) in data centers [1][2].
To avoid confusion, the terms "hot" and "cold" will be applied to the
multi-gen LRU, as a new convention; the terms "active" and "inactive" will
be applied to the active/inactive LRU, as usual.
The protection of hot pages and the selection of cold pages are based
on page access channels and patterns. There are two access channels:
one through page tables and the other through file descriptors. The
protection of the former channel is by design stronger because:
1. The uncertainty in determining the access patterns of the former
channel is higher due to the approximation of the accessed bit.
2. The cost of evicting the former channel is higher due to the TLB
flushes required and the likelihood of encountering the dirty bit.
3. The penalty of underprotecting the former channel is higher because
applications usually do not prepare themselves for major page
faults like they do for blocked I/O. E.g., GUI applications
commonly use dedicated I/O threads to avoid blocking rendering
threads.
There are also two access patterns: one with temporal locality and the
other without. For the reasons listed above, the former channel is
assumed to follow the former pattern unless VM_SEQ_READ or VM_RAND_READ is
present; the latter channel is assumed to follow the latter pattern unless
outlying refaults have been observed [3][4].
The next patch will address the "outlying refaults". Three macros, i.e.,
LRU_REFS_WIDTH, LRU_REFS_PGOFF and LRU_REFS_MASK, used later are added in
this patch to make the entire patchset less diffy.
A page is added to the youngest generation on faulting. The aging needs
to check the accessed bit at least twice before handing this page over to
the eviction. The first check takes care of the accessed bit set on the
initial fault; the second check makes sure this page has not been used
since then. This protocol, AKA second chance, requires a minimum of two
generations, hence MIN_NR_GENS.
[1] https://dl.acm.org/doi/10.1145/3297858.3304053
[2] https://dl.acm.org/doi/10.1145/3503222.3507731
[3] https://lwn.net/Articles/495543/
[4] https://lwn.net/Articles/815342/
Link: https://lkml.kernel.org/r/20220918080010.2920238-6-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yu Zhao [Sun, 18 Sep 2022 08:00:01 +0000 (02:00 -0600)]
Revert "include/linux/mm_inline.h: fold __update_lru_size() into its sole caller"
This patch undoes the following refactor: commit
289ccba18af4
("include/linux/mm_inline.h: fold __update_lru_size() into its sole
caller")
The upcoming changes to include/linux/mm_inline.h will reuse
__update_lru_size().
Link: https://lkml.kernel.org/r/20220918080010.2920238-5-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yu Zhao [Sun, 18 Sep 2022 08:00:00 +0000 (02:00 -0600)]
mm/vmscan.c: refactor shrink_node()
This patch refactors shrink_node() to improve readability for the upcoming
changes to mm/vmscan.c.
Link: https://lkml.kernel.org/r/20220918080010.2920238-4-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yu Zhao [Sun, 18 Sep 2022 07:59:59 +0000 (01:59 -0600)]
mm: x86: add CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG
Some architectures support the accessed bit in non-leaf PMD entries, e.g.,
x86 sets the accessed bit in a non-leaf PMD entry when using it as part of
linear address translation [1]. Page table walkers that clear the
accessed bit may use this capability to reduce their search space.
Note that:
1. Although an inline function is preferable, this capability is added
as a configuration option for consistency with the existing macros.
2. Due to the little interest in other varieties, this capability was
only tested on Intel and AMD CPUs.
Thanks to the following developers for their efforts [2][3].
Randy Dunlap <rdunlap@infradead.org>
Stephen Rothwell <sfr@canb.auug.org.au>
[1]: Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 3 (June 2021), section 4.8
[2] https://lore.kernel.org/r/
bfdcc7c8-922f-61a9-aa15-
7e7250f04af7@infradead.org/
[3] https://lore.kernel.org/r/
20220413151513.
5a0d7a7e@canb.auug.org.au/
Link: https://lkml.kernel.org/r/20220918080010.2920238-3-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yu Zhao [Sun, 18 Sep 2022 07:59:58 +0000 (01:59 -0600)]
mm: x86, arm64: add arch_has_hw_pte_young()
Patch series "Multi-Gen LRU Framework", v14.
What's new
==========
1. OpenWrt, in addition to Android, Arch Linux Zen, Armbian, ChromeOS,
Liquorix, post-factum and XanMod, is now shipping MGLRU on 5.15.
2. Fixed long-tailed direct reclaim latency seen on high-memory (TBs)
machines. The old direct reclaim backoff, which tries to enforce a
minimum fairness among all eligible memcgs, over-swapped by about
(total_mem>>DEF_PRIORITY)-nr_to_reclaim. The new backoff, which
pulls the plug on swapping once the target is met, trades some
fairness for curtailed latency:
https://lore.kernel.org/r/
20220918080010.2920238-10-yuzhao@google.com/
3. Fixed minior build warnings and conflicts. More comments and nits.
TLDR
====
The current page reclaim is too expensive in terms of CPU usage and it
often makes poor choices about what to evict. This patchset offers an
alternative solution that is performant, versatile and
straightforward.
Patchset overview
=================
The design and implementation overview is in patch 14:
https://lore.kernel.org/r/
20220918080010.2920238-15-yuzhao@google.com/
01. mm: x86, arm64: add arch_has_hw_pte_young()
02. mm: x86: add CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG
Take advantage of hardware features when trying to clear the accessed
bit in many PTEs.
03. mm/vmscan.c: refactor shrink_node()
04. Revert "include/linux/mm_inline.h: fold __update_lru_size() into
its sole caller"
Minor refactors to improve readability for the following patches.
05. mm: multi-gen LRU: groundwork
Adds the basic data structure and the functions that insert pages to
and remove pages from the multi-gen LRU (MGLRU) lists.
06. mm: multi-gen LRU: minimal implementation
A minimal implementation without optimizations.
07. mm: multi-gen LRU: exploit locality in rmap
Exploits spatial locality to improve efficiency when using the rmap.
08. mm: multi-gen LRU: support page table walks
Further exploits spatial locality by optionally scanning page tables.
09. mm: multi-gen LRU: optimize multiple memcgs
Optimizes the overall performance for multiple memcgs running mixed
types of workloads.
10. mm: multi-gen LRU: kill switch
Adds a kill switch to enable or disable MGLRU at runtime.
11. mm: multi-gen LRU: thrashing prevention
12. mm: multi-gen LRU: debugfs interface
Provide userspace with features like thrashing prevention, working set
estimation and proactive reclaim.
13. mm: multi-gen LRU: admin guide
14. mm: multi-gen LRU: design doc
Add an admin guide and a design doc.
Benchmark results
=================
Independent lab results
-----------------------
Based on the popularity of searches [01] and the memory usage in
Google's public cloud, the most popular open-source memory-hungry
applications, in alphabetical order, are:
Apache Cassandra Memcached
Apache Hadoop MongoDB
Apache Spark PostgreSQL
MariaDB (MySQL) Redis
An independent lab evaluated MGLRU with the most widely used benchmark
suites for the above applications. They posted 960 data points along
with kernel metrics and perf profiles collected over more than 500
hours of total benchmark time. Their final reports show that, with 95%
confidence intervals (CIs), the above applications all performed
significantly better for at least part of their benchmark matrices.
On 5.14:
1. Apache Spark [02] took 95% CIs [9.28, 11.19]% and [12.20, 14.93]%
less wall time to sort three billion random integers, respectively,
under the medium- and the high-concurrency conditions, when
overcommitting memory. There were no statistically significant
changes in wall time for the rest of the benchmark matrix.
2. MariaDB [03] achieved 95% CIs [5.24, 10.71]% and [20.22, 25.97]%
more transactions per minute (TPM), respectively, under the medium-
and the high-concurrency conditions, when overcommitting memory.
There were no statistically significant changes in TPM for the rest
of the benchmark matrix.
3. Memcached [04] achieved 95% CIs [23.54, 32.25]%, [20.76, 41.61]%
and [21.59, 30.02]% more operations per second (OPS), respectively,
for sequential access, random access and Gaussian (distribution)
access, when THP=always; 95% CIs [13.85, 15.97]% and
[23.94, 29.92]% more OPS, respectively, for random access and
Gaussian access, when THP=never. There were no statistically
significant changes in OPS for the rest of the benchmark matrix.
4. MongoDB [05] achieved 95% CIs [2.23, 3.44]%, [6.97, 9.73]% and
[2.16, 3.55]% more operations per second (OPS), respectively, for
exponential (distribution) access, random access and Zipfian
(distribution) access, when underutilizing memory; 95% CIs
[8.83, 10.03]%, [21.12, 23.14]% and [5.53, 6.46]% more OPS,
respectively, for exponential access, random access and Zipfian
access, when overcommitting memory.
On 5.15:
5. Apache Cassandra [06] achieved 95% CIs [1.06, 4.10]%, [1.94, 5.43]%
and [4.11, 7.50]% more operations per second (OPS), respectively,
for exponential (distribution) access, random access and Zipfian
(distribution) access, when swap was off; 95% CIs [0.50, 2.60]%,
[6.51, 8.77]% and [3.29, 6.75]% more OPS, respectively, for
exponential access, random access and Zipfian access, when swap was
on.
6. Apache Hadoop [07] took 95% CIs [5.31, 9.69]% and [2.02, 7.86]%
less average wall time to finish twelve parallel TeraSort jobs,
respectively, under the medium- and the high-concurrency
conditions, when swap was on. There were no statistically
significant changes in average wall time for the rest of the
benchmark matrix.
7. PostgreSQL [08] achieved 95% CI [1.75, 6.42]% more transactions per
minute (TPM) under the high-concurrency condition, when swap was
off; 95% CIs [12.82, 18.69]% and [22.70, 46.86]% more TPM,
respectively, under the medium- and the high-concurrency
conditions, when swap was on. There were no statistically
significant changes in TPM for the rest of the benchmark matrix.
8. Redis [09] achieved 95% CIs [0.58, 5.94]%, [6.55, 14.58]% and
[11.47, 19.36]% more total operations per second (OPS),
respectively, for sequential access, random access and Gaussian
(distribution) access, when THP=always; 95% CIs [1.27, 3.54]%,
[10.11, 14.81]% and [8.75, 13.64]% more total OPS, respectively,
for sequential access, random access and Gaussian access, when
THP=never.
Our lab results
---------------
To supplement the above results, we ran the following benchmark suites
on 5.16-rc7 and found no regressions [10].
fs_fio_bench_hdd_mq pft
fs_lmbench pgsql-hammerdb
fs_parallelio redis
fs_postmark stream
hackbench sysbenchthread
kernbench tpcc_spark
memcached unixbench
multichase vm-scalability
mutilate will-it-scale
nginx
[01] https://trends.google.com
[02] https://lore.kernel.org/r/
20211102002002.92051-1-bot@edi.works/
[03] https://lore.kernel.org/r/
20211009054315.47073-1-bot@edi.works/
[04] https://lore.kernel.org/r/
20211021194103.65648-1-bot@edi.works/
[05] https://lore.kernel.org/r/
20211109021346.50266-1-bot@edi.works/
[06] https://lore.kernel.org/r/
20211202062806.80365-1-bot@edi.works/
[07] https://lore.kernel.org/r/
20211209072416.33606-1-bot@edi.works/
[08] https://lore.kernel.org/r/
20211218071041.24077-1-bot@edi.works/
[09] https://lore.kernel.org/r/
20211122053248.57311-1-bot@edi.works/
[10] https://lore.kernel.org/r/
20220104202247.2903702-1-yuzhao@google.com/
Read-world applications
=======================
Third-party testimonials
------------------------
Konstantin reported [11]:
I have Archlinux with 8G RAM + zswap + swap. While developing, I
have lots of apps opened such as multiple LSP-servers for different
langs, chats, two browsers, etc... Usually, my system gets quickly
to a point of SWAP-storms, where I have to kill LSP-servers,
restart browsers to free memory, etc, otherwise the system lags
heavily and is barely usable.
1.5 day ago I migrated from 5.11.15 kernel to 5.12 + the LRU
patchset, and I started up by opening lots of apps to create memory
pressure, and worked for a day like this. Till now I had not a
single SWAP-storm, and mind you I got 3.4G in SWAP. I was never
getting to the point of 3G in SWAP before without a single
SWAP-storm.
Vaibhav from IBM reported [12]:
In a synthetic MongoDB Benchmark, seeing an average of ~19%
throughput improvement on POWER10(Radix MMU + 64K Page Size) with
MGLRU patches on top of 5.16 kernel for MongoDB + YCSB across
three different request distributions, namely, Exponential, Uniform
and Zipfan.
Shuang from U of Rochester reported [13]:
With the MGLRU, fio achieved 95% CIs [38.95, 40.26]%, [4.12, 6.64]%
and [9.26, 10.36]% higher throughput, respectively, for random
access, Zipfian (distribution) access and Gaussian (distribution)
access, when the average number of jobs per CPU is 1; 95% CIs
[42.32, 49.15]%, [9.44, 9.89]% and [20.99, 22.86]% higher
throughput, respectively, for random access, Zipfian access and
Gaussian access, when the average number of jobs per CPU is 2.
Daniel from Michigan Tech reported [14]:
With Memcached allocating ~100GB of byte-addressable Optante,
performance improvement in terms of throughput (measured as queries
per second) was about 10% for a series of workloads.
Large-scale deployments
-----------------------
We've rolled out MGLRU to tens of millions of ChromeOS users and
about a million Android users. Google's fleetwide profiling [15] shows
an overall 40% decrease in kswapd CPU usage, in addition to
improvements in other UX metrics, e.g., an 85% decrease in the number
of low-memory kills at the 75th percentile and an 18% decrease in
app launch time at the 50th percentile.
The downstream kernels that have been using MGLRU include:
1. Android [16]
2. Arch Linux Zen [17]
3. Armbian [18]
4. ChromeOS [19]
5. Liquorix [20]
6. OpenWrt [21]
7. post-factum [22]
8. XanMod [23]
[11] https://lore.kernel.org/r/
140226722f2032c86301fbd326d91baefe3d7d23.camel@yandex.ru/
[12] https://lore.kernel.org/r/87czj3mux0.fsf@vajain21.in.ibm.com/
[13] https://lore.kernel.org/r/
20220105024423.26409-1-szhai2@cs.rochester.edu/
[14] https://lore.kernel.org/r/CA+4-3vksGvKd18FgRinxhqHetBS1hQekJE2gwco8Ja-bJWKtFw@mail.gmail.com/
[15] https://dl.acm.org/doi/10.1145/2749469.2750392
[16] https://android.com
[17] https://archlinux.org
[18] https://armbian.com
[19] https://chromium.org
[20] https://liquorix.net
[21] https://openwrt.org
[22] https://codeberg.org/pf-kernel
[23] https://xanmod.org
Summary
=======
The facts are:
1. The independent lab results and the real-world applications
indicate substantial improvements; there are no known regressions.
2. Thrashing prevention, working set estimation and proactive reclaim
work out of the box; there are no equivalent solutions.
3. There is a lot of new code; no smaller changes have been
demonstrated similar effects.
Our options, accordingly, are:
1. Given the amount of evidence, the reported improvements will likely
materialize for a wide range of workloads.
2. Gauging the interest from the past discussions, the new features
will likely be put to use for both personal computers and data
centers.
3. Based on Google's track record, the new code will likely be well
maintained in the long term. It'd be more difficult if not
impossible to achieve similar effects with other approaches.
This patch (of 14):
Some architectures automatically set the accessed bit in PTEs, e.g., x86
and arm64 v8.2. On architectures that do not have this capability,
clearing the accessed bit in a PTE usually triggers a page fault following
the TLB miss of this PTE (to emulate the accessed bit).
Being aware of this capability can help make better decisions, e.g.,
whether to spread the work out over a period of time to reduce bursty page
faults when trying to clear the accessed bit in many PTEs.
Note that theoretically this capability can be unreliable, e.g.,
hotplugged CPUs might be different from builtin ones. Therefore it should
not be used in architecture-independent code that involves correctness,
e.g., to determine whether TLB flushes are required (in combination with
the accessed bit).
Link: https://lkml.kernel.org/r/20220918080010.2920238-1-yuzhao@google.com
Link: https://lkml.kernel.org/r/20220918080010.2920238-2-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yang Yang [Mon, 15 Aug 2022 07:28:37 +0000 (07:28 +0000)]
mm/page_io: count submission time as thrashing delay for delayacct
Once upon a time, we only support accounting thrashing of page cache.
Then Joonsoo introduced workingset detection for anonymous pages and we
gained the ability to account thrashing of them[1].
Likes PSI, we count submission time as thrashing delay because when the
device is congested, or the submitting cgroup IO-throttled, submission can
be a significant part of overall IO time.
Without this patch, swap thrashing through frontswap or some block
device supporting rw_page operation isn't measured correctly.
This patch is based on "delayacct: support re-entrance detection of
thrashing accounting".
[1] commit
aae466b0052e ("mm/swap: implement workingset detection for anonymous LRU")
Link: https://lkml.kernel.org/r/20220815072835.74876-1-yang.yang29@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Reviewed-by: wangyong <wang.yong12@zte.com.cn>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yang Yang [Mon, 15 Aug 2022 07:11:35 +0000 (07:11 +0000)]
delayacct: support re-entrance detection of thrashing accounting
Once upon a time, we only support accounting thrashing of page cache.
Then Joonsoo introduced workingset detection for anonymous pages and we
gained the ability to account thrashing of them[1].
For page cache thrashing accounting, there is no suitable place to do it
in fs level likes swap_readpage(). So we have to do it in
folio_wait_bit_common().
Then for anonymous pages thrashing accounting, we have to do it in both
swap_readpage() and folio_wait_bit_common(). This likes PSI, so we should
let thrashing accounting supports re-entrance detection.
This patch is to prepare complete thrashing accounting, and is based on
patch "filemap: make the accounting of thrashing more consistent".
[1] commit
aae466b0052e ("mm/swap: implement workingset detection for anonymous LRU")
Link: https://lkml.kernel.org/r/20220815071134.74551-1-yang.yang29@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Reviewed-by: wangyong <wang.yong12@zte.com.cn>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Baolin Wang [Wed, 17 Aug 2022 08:14:08 +0000 (16:14 +0800)]
mm: migrate: do not retry 10 times for the subpages of fail-to-migrate THP
If THP is failed to migrate due to -ENOSYS or -ENOMEM case, the THP will
be split, and the subpages of fail-to-migrate THP will be tried to migrate
again, so we should not account the retry counter in the second loop,
since we already accounted 'nr_thp_failed' in the first loop.
Moreover we also do not need retry 10 times for -EAGAIN case for the
subpages of fail-to-migrate THP in the second loop, since we already
regarded the THP as migration failure, and save some migration time (for
the worst case, will try 512 * 10 times) according to previous discussion
[1].
[1] https://lore.kernel.org/linux-mm/87r13a7n04.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lkml.kernel.org/r/20220817081408.513338-9-ying.huang@intel.com
Tested-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Huang Ying [Wed, 17 Aug 2022 08:14:07 +0000 (16:14 +0800)]
migrate_pages(): fix failure counting for retry
After 10 retries, we will give up and the remaining pages will be counted
as failure in nr_failed and nr_thp_failed. We should count the failure in
nr_failed_pages too. This is done in this patch.
Link: https://lkml.kernel.org/r/20220817081408.513338-8-ying.huang@intel.com
Fixes:
5984fabb6e82 ("mm: move_pages: report the number of non-attempted pages")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Huang Ying [Wed, 17 Aug 2022 08:14:06 +0000 (16:14 +0800)]
migrate_pages(): fix failure counting for THP splitting
If THP is failed to be migrated, it may be split and retry. But after
splitting, the head page will be left in "from" list, although THP
migration failure has been counted already. If the head page is failed to
be migrated too, the failure will be counted twice incorrectly. So this
is fixed in this patch via moving the head page of THP after splitting to
"thp_split_pages" too.
Link: https://lkml.kernel.org/r/20220817081408.513338-7-ying.huang@intel.com
Fixes:
5984fabb6e82 ("mm: move_pages: report the number of non-attempted pages")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Huang Ying [Wed, 17 Aug 2022 08:14:05 +0000 (16:14 +0800)]
migrate_pages(): fix failure counting for THP on -ENOSYS
If THP or hugetlbfs page migration isn't supported, unmap_and_move() or
unmap_and_move_huge_page() will return -ENOSYS. For THP, splitting will
be tried, but if splitting doesn't succeed, the THP will be left in "from"
list wrongly. If some other pages are retried, the THP migration failure
will counted again. This is fixed via moving the failure THP from "from"
to "ret_pages".
Another issue of the original code is that the unsupported failure
processing isn't consistent between THP and hugetlbfs page. Make them
consistent in this patch to make the code easier to be understood too.
Link: https://lkml.kernel.org/r/20220817081408.513338-6-ying.huang@intel.com
Fixes:
5984fabb6e82 ("mm: move_pages: report the number of non-attempted pages")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Huang Ying [Wed, 17 Aug 2022 08:14:04 +0000 (16:14 +0800)]
migrate_pages(): fix failure counting for THP subpages retrying
If THP is failed to be migrated for -ENOSYS and -ENOMEM, the THP will be
split into thp_split_pages, and after other pages are migrated, pages in
thp_split_pages will be migrated with no_subpage_counting == true, because
its failure have been counted already. If some pages in thp_split_pages
are retried during migration, we should not count their failure if
no_subpage_counting == true too. This is done this patch to fix the
failure counting for THP subpages retrying.
Link: https://lkml.kernel.org/r/20220817081408.513338-5-ying.huang@intel.com
Fixes:
5984fabb6e82 ("mm: move_pages: report the number of non-attempted pages")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Huang Ying [Wed, 17 Aug 2022 08:14:03 +0000 (16:14 +0800)]
migrate_pages(): fix THP failure counting for -ENOMEM
In unmap_and_move(), if the new THP cannot be allocated, -ENOMEM will be
returned, and migrate_pages() will try to split the THP unless "reason" is
MR_NUMA_MISPLACED (that is, nosplit == true). But when nosplit == true,
the THP migration failure will not be counted.
This is incorrect, so in this patch, the THP migration failure will be
counted for -ENOMEM regardless of nosplit is true or false. The nr_failed
counting isn't fixed because it's not used. Added some comments for it
per Baolin's suggestion.
Link: https://lkml.kernel.org/r/20220817081408.513338-4-ying.huang@intel.com
Fixes:
5984fabb6e82 ("mm: move_pages: report the number of non-attempted pages")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Huang Ying [Wed, 17 Aug 2022 08:14:02 +0000 (16:14 +0800)]
migrate_pages(): remove unnecessary list_safe_reset_next()
Before commit
b5bade978e9b ("mm: migrate: fix the return value of
migrate_pages()"), the tail pages of THP will be put in the "from"
list directly. So one of the loop cursors (page2) needs to be reset,
as is done in try_split_thp() via list_safe_reset_next(). But after
the commit, the tail pages of THP will be put in a dedicated
list (thp_split_pages). That is, the "from" list will not be changed
during splitting. So, it's unnecessary to call list_safe_reset_next()
anymore.
This is a code cleanup, no functionality changes are expected.
Link: https://lkml.kernel.org/r/20220817081408.513338-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Huang Ying [Wed, 17 Aug 2022 08:14:01 +0000 (16:14 +0800)]
migrate: fix syscall move_pages() return value for failure
Patch series "migrate_pages(): fix several bugs in error path", v3.
During review the code of migrate_pages() and build a test program for
it. Several bugs in error path are identified and fixed in this
series.
Most patches are tested via
- Apply error-inject.patch in Linux kernel
- Compile test-migrate.c (with -lnuma)
- Test with test-migrate.sh
error-inject.patch, test-migrate.c, and test-migrate.sh are as below.
It turns out that error injection is an important tool to fix bugs in
error path.
This patch (of 8):
The return value of move_pages() syscall is incorrect when counting
the remaining pages to be migrated. For example, for the following
test program,
"
#define _GNU_SOURCE
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/uio.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <unistd.h>
#include <numaif.h>
#include <numa.h>
#ifndef MADV_FREE
#define MADV_FREE 8 /* free pages only if memory pressure */
#endif
#define ONE_MB (1024 * 1024)
#define MAP_SIZE (16 * ONE_MB)
#define THP_SIZE (2 * ONE_MB)
#define THP_MASK (THP_SIZE - 1)
#define ERR_EXIT_ON(cond, msg) \
do { \
int __cond_in_macro = (cond); \
if (__cond_in_macro) \
error_exit(__cond_in_macro, (msg)); \
} while (0)
void error_msg(int ret, int nr, int *status, const char *msg)
{
int i;
fprintf(stderr, "Error: %s, ret : %d, error: %s\n",
msg, ret, strerror(errno));
if (!nr)
return;
fprintf(stderr, "status: ");
for (i = 0; i < nr; i++)
fprintf(stderr, "%d ", status[i]);
fprintf(stderr, "\n");
}
void error_exit(int ret, const char *msg)
{
error_msg(ret, 0, NULL, msg);
exit(1);
}
int page_size;
bool do_vmsplice;
bool do_thp;
static int pipe_fds[2];
void *addr;
char *pn;
char *pn1;
void *pages[2];
int status[2];
void prepare()
{
int ret;
struct iovec iov;
if (addr) {
munmap(addr, MAP_SIZE);
close(pipe_fds[0]);
close(pipe_fds[1]);
}
ret = pipe(pipe_fds);
ERR_EXIT_ON(ret, "pipe");
addr = mmap(NULL, MAP_SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
ERR_EXIT_ON(addr == MAP_FAILED, "mmap");
if (do_thp) {
ret = madvise(addr, MAP_SIZE, MADV_HUGEPAGE);
ERR_EXIT_ON(ret, "advise hugepage");
}
pn = (char *)(((unsigned long)addr + THP_SIZE) & ~THP_MASK);
pn1 = pn + THP_SIZE;
pages[0] = pn;
pages[1] = pn1;
*pn = 1;
if (do_vmsplice) {
iov.iov_base = pn;
iov.iov_len = page_size;
ret = vmsplice(pipe_fds[1], &iov, 1, 0);
ERR_EXIT_ON(ret < 0, "vmsplice");
}
status[0] = status[1] = 1024;
}
void test_migrate()
{
int ret;
int nodes[2] = { 1, 1 };
pid_t pid = getpid();
prepare();
ret = move_pages(pid, 1, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 1, status, "move 1 page");
prepare();
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages, page 1 not mapped");
prepare();
*pn1 = 1;
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages");
prepare();
*pn1 = 1;
nodes[1] = 0;
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages, page 1 to node 0");
}
int main(int argc, char *argv[])
{
numa_run_on_node(0);
page_size = getpagesize();
test_migrate();
fprintf(stderr, "\nMake page 0 cannot be migrated:\n");
do_vmsplice = true;
test_migrate();
fprintf(stderr, "\nTest THP:\n");
do_thp = true;
do_vmsplice = false;
test_migrate();
fprintf(stderr, "\nTHP: make page 0 cannot be migrated:\n");
do_vmsplice = true;
test_migrate();
return 0;
}
"
The output of the current kernel is,
"
Error: move 1 page, ret : 0, error: Success
status: 1
Error: move 2 pages, page 1 not mapped, ret : 0, error: Success
status: 1 -14
Error: move 2 pages, ret : 0, error: Success
status: 1 1
Error: move 2 pages, page 1 to node 0, ret : 0, error: Success
status: 1 0
Make page 0 cannot be migrated:
Error: move 1 page, ret : 0, error: Success
status: 1024
Error: move 2 pages, page 1 not mapped, ret : 1, error: Success
status: 1024 -14
Error: move 2 pages, ret : 0, error: Success
status: 1024 1024
Error: move 2 pages, page 1 to node 0, ret : 1, error: Success
status: 1024 1024
"
While the expected output is,
"
Error: move 1 page, ret : 0, error: Success
status: 1
Error: move 2 pages, page 1 not mapped, ret : 0, error: Success
status: 1 -14
Error: move 2 pages, ret : 0, error: Success
status: 1 1
Error: move 2 pages, page 1 to node 0, ret : 0, error: Success
status: 1 0
Make page 0 cannot be migrated:
Error: move 1 page, ret : 1, error: Success
status: 1024
Error: move 2 pages, page 1 not mapped, ret : 1, error: Success
status: 1024 -14
Error: move 2 pages, ret : 1, error: Success
status: 1024 1024
Error: move 2 pages, page 1 to node 0, ret : 2, error: Success
status: 1024 1024
"
Fix this via correcting the remaining pages counting. With the fix,
the output for the test program as above is expected.
Link: https://lkml.kernel.org/r/20220817081408.513338-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220817081408.513338-2-ying.huang@intel.com
Fixes:
5984fabb6e82 ("mm: move_pages: report the number of non-attempted pages")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yang Yang [Fri, 5 Aug 2022 03:38:39 +0000 (03:38 +0000)]
filemap: make the accounting of thrashing more consistent
Once upon a time, we only support accounting thrashing of page cache.
Then Joonsoo introduced workingset detection for anonymous pages and we
gained the ability to account thrashing of them[1].
So let delayacct account both the thrashing of page cache and anonymous
pages, this could make the codes more consistent and simpler.
[1] commit
aae466b0052e ("mm/swap: implement workingset detection for anonymous LRU")
Link: https://lkml.kernel.org/r/20220805033838.1714674-1-yang.yang29@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Thu, 11 Aug 2022 16:13:31 +0000 (12:13 -0400)]
mm/swap: cache swap migration A/D bits support
Introduce a variable swap_migration_ad_supported to cache whether the arch
supports swap migration A/D bits.
Here one thing to mention is that SWP_MIG_TOTAL_BITS will internally
reference the other macro MAX_PHYSMEM_BITS, which is a function call on
x86 (constant on all the rest of archs).
It's safe to reference it in swapfile_init() because when reaching here
we're already during initcalls level 4 so we must have initialized 5-level
pgtable for x86_64 (right after early_identify_cpu() finishes).
- start_kernel
- setup_arch
- early_cpu_init
- get_cpu_cap --> fetch from CPUID (including X86_FEATURE_LA57)
- early_identify_cpu --> clear X86_FEATURE_LA57 (if early lvl5 not enabled (USE_EARLY_PGTABLE_L5))
- arch_call_rest_init
- rest_init
- kernel_init
- kernel_init_freeable
- do_basic_setup
- do_initcalls --> calls swapfile_init() (initcall level 4)
This should slightly speed up the migration swap entry handlings.
Link: https://lkml.kernel.org/r/20220811161331.37055-8-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Thu, 11 Aug 2022 16:13:30 +0000 (12:13 -0400)]
mm/swap: cache maximum swapfile size when init swap
We used to have swapfile_maximum_size() fetching a maximum value of
swapfile size per-arch.
As the caller of max_swapfile_size() grows, this patch introduce a
variable "swapfile_maximum_size" and cache the value of old
max_swapfile_size(), so that we don't need to calculate the value every
time.
Caching the value in swapfile_init() is safe because when reaching the
phase we should have initialized all the relevant information. Here the
major arch to take care of is x86, which defines the max swapfile size
based on L1TF mitigation.
Here both X86_BUG_L1TF or l1tf_mitigation should have been setup properly
when reaching swapfile_init(). As a reference, the code path looks like
this for x86:
- start_kernel
- setup_arch
- early_cpu_init
- early_identify_cpu --> setup X86_BUG_L1TF
- parse_early_param
- l1tf_cmdline --> set l1tf_mitigation
- check_bugs
- l1tf_select_mitigation --> set l1tf_mitigation
- arch_call_rest_init
- rest_init
- kernel_init
- kernel_init_freeable
- do_basic_setup
- do_initcalls --> calls swapfile_init() (initcall level 4)
The swapfile size only depends on swp pte format on non-x86 archs, so
caching it is safe too.
Since at it, rename max_swapfile_size() to arch_max_swapfile_size()
because arch can define its own function, so it's more straightforward to
have "arch_" as its prefix. At the meantime, export swapfile_maximum_size
to replace the old usages of max_swapfile_size().
[peterx@redhat.com: declare arch_max_swapfile_size) in swapfile.h]
Link: https://lkml.kernel.org/r/YxTh1GuC6ro5fKL5@xz-m1.local
Link: https://lkml.kernel.org/r/20220811161331.37055-7-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Thu, 11 Aug 2022 16:13:29 +0000 (12:13 -0400)]
mm: remember young/dirty bit for page migrations
When page migration happens, we always ignore the young/dirty bit settings
in the old pgtable, and marking the page as old in the new page table
using either pte_mkold() or pmd_mkold(), and keeping the pte clean.
That's fine from functional-wise, but that's not friendly to page reclaim
because the moving page can be actively accessed within the procedure.
Not to mention hardware setting the young bit can bring quite some
overhead on some systems, e.g. x86_64 needs a few hundreds nanoseconds to
set the bit. The same slowdown problem to dirty bits when the memory is
first written after page migration happened.
Actually we can easily remember the A/D bit configuration and recover the
information after the page is migrated. To achieve it, define a new set
of bits in the migration swap offset field to cache the A/D bits for old
pte. Then when removing/recovering the migration entry, we can recover
the A/D bits even if the page changed.
One thing to mention is that here we used max_swapfile_size() to detect
how many swp offset bits we have, and we'll only enable this feature if we
know the swp offset is big enough to store both the PFN value and the A/D
bits. Otherwise the A/D bits are dropped like before.
Link: https://lkml.kernel.org/r/20220811161331.37055-6-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Thu, 11 Aug 2022 16:13:28 +0000 (12:13 -0400)]
mm/thp: carry over dirty bit when thp splits on pmd
Carry over the dirty bit from pmd to pte when a huge pmd splits. It
shouldn't be a correctness issue since when pmd_dirty() we'll have the
page marked dirty anyway, however having dirty bit carried over helps the
next initial writes of split ptes on some archs like x86.
Link: https://lkml.kernel.org/r/20220811161331.37055-5-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Thu, 11 Aug 2022 16:13:27 +0000 (12:13 -0400)]
mm/swap: add swp_offset_pfn() to fetch PFN from swap entry
We've got a bunch of special swap entries that stores PFN inside the swap
offset fields. To fetch the PFN, normally the user just calls
swp_offset() assuming that'll be the PFN.
Add a helper swp_offset_pfn() to fetch the PFN instead, fetching only the
max possible length of a PFN on the host, meanwhile doing proper check
with MAX_PHYSMEM_BITS to make sure the swap offsets can actually store the
PFNs properly always using the BUILD_BUG_ON() in is_pfn_swap_entry().
One reason to do so is we never tried to sanitize whether swap offset can
really fit for storing PFN. At the meantime, this patch also prepares us
with the future possibility to store more information inside the swp
offset field, so assuming "swp_offset(entry)" to be the PFN will not stand
any more very soon.
Replace many of the swp_offset() callers to use swp_offset_pfn() where
proper. Note that many of the existing users are not candidates for the
replacement, e.g.:
(1) When the swap entry is not a pfn swap entry at all, or,
(2) when we wanna keep the whole swp_offset but only change the swp type.
For the latter, it can happen when fork() triggered on a write-migration
swap entry pte, we may want to only change the migration type from
write->read but keep the rest, so it's not "fetching PFN" but "changing
swap type only". They're left aside so that when there're more
information within the swp offset they'll be carried over naturally in
those cases.
Since at it, dropping hwpoison_entry_to_pfn() because that's exactly what
the new swp_offset_pfn() is about.
Link: https://lkml.kernel.org/r/20220811161331.37055-4-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Thu, 11 Aug 2022 16:13:26 +0000 (12:13 -0400)]
mm/swap: comment all the ifdef in swapops.h
swapops.h contains quite a few layers of ifdef, some of the "else" and
"endif" doesn't get proper comment on the macro so it's hard to follow on
what are they referring to. Add the comments.
Link: https://lkml.kernel.org/r/20220811161331.37055-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Thu, 11 Aug 2022 16:13:25 +0000 (12:13 -0400)]
mm/x86: use SWP_TYPE_BITS in 3-level swap macros
Patch series "mm: Remember a/d bits for migration entries", v4.
Problem
=======
When migrating a page, right now we always mark the migrated page as old &
clean.
However that could lead to at least two problems:
(1) We lost the real hot/cold information while we could have persisted.
That information shouldn't change even if the backing page is changed
after the migration,
(2) There can be always extra overhead on the immediate next access to
any migrated page, because hardware MMU needs cycles to set the young
bit again for reads, and dirty bits for write, as long as the
hardware MMU supports these bits.
Many of the recent upstream works showed that (2) is not something trivial
and actually very measurable. In my test case, reading 1G chunk of memory
- jumping in page size intervals - could take 99ms just because of the
extra setting on the young bit on a generic x86_64 system, comparing to
4ms if young set.
This issue is originally reported by Andrea Arcangeli.
Solution
========
To solve this problem, this patchset tries to remember the young/dirty
bits in the migration entries and carry them over when recovering the
ptes.
We have the chance to do so because in many systems the swap offset is not
really fully used. Migration entries use swp offset to store PFN only,
while the PFN is normally not as large as swp offset and normally smaller.
It means we do have some free bits in swp offset that we can use to store
things like A/D bits, and that's how this series tried to approach this
problem.
max_swapfile_size() is used here to detect per-arch offset length in swp
entries. We'll automatically remember the A/D bits when we find that we
have enough swp offset field to keep both the PFN and the extra bits.
Since max_swapfile_size() can be slow, the last two patches cache the
results for it and also swap_migration_ad_supported as a whole.
Known Issues / TODOs
====================
We still haven't taught madvise() to recognize the new A/D bits in
migration entries, namely MADV_COLD/MADV_FREE. E.g. when MADV_COLD upon
a migration entry. It's not clear yet on whether we should clear the A
bit, or we should just drop the entry directly.
We didn't teach idle page tracking on the new migration entries, because
it'll need larger rework on the tree on rmap pgtable walk. However it
should make it already better because before this patchset page will be
old page after migration, so the series will fix potential false negative
of idle page tracking when pages were migrated before observing.
The other thing is migration A/D bits will not start to working for
private device swap entries. The code is there for completeness but since
private device swap entries do not yet have fields to store A/D bits, even
if we'll persistent A/D across present pte switching to migration entry,
we'll lose it again when the migration entry converted to private device
swap entry.
Tests
=====
After the patchset applied, the immediate read access test [1] of above 1G
chunk after migration can shrink from 99ms to 4ms. The test is done by
moving 1G pages from node 0->1->0 then read it in page size jumps. The
test is with Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz.
Similar effect can also be measured when writting the memory the 1st time
after migration.
After applying the patchset, both initial immediate read/write after page
migrated will perform similarly like before migration happened.
Patch Layout
============
Patch 1-2: Cleanups from either previous versions or on swapops.h macros.
Patch 3-4: Prepare for the introduction of migration A/D bits
Patch 5: The core patch to remember young/dirty bit in swap offsets.
Patch 6-7: Cache relevant fields to make migration_entry_supports_ad() fast.
[1] https://github.com/xzpeter/clibs/blob/master/misc/swap-young.c
This patch (of 7):
Replace all the magic "5" with the macro.
Link: https://lkml.kernel.org/r/20220811161331.37055-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20220811161331.37055-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Tue, 30 Aug 2022 12:36:04 +0000 (20:36 +0800)]
mm, hwpoison: cleanup some obsolete comments
1.Remove meaningless comment in kill_proc(). That doesn't tell anything.
2.Fix the wrong function name get_hwpoison_unless_zero(). It should be
get_page_unless_zero().
3.The gate keeper for free hwpoison page has moved to check_new_page().
Update the corresponding comment.
Link: https://lkml.kernel.org/r/20220830123604.25763-7-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Tue, 30 Aug 2022 12:36:03 +0000 (20:36 +0800)]
mm, hwpoison: check PageTable() explicitly in hwpoison_user_mappings()
PageTable can't be handled by memory_failure(). Filter it out explicitly in
hwpoison_user_mappings(). This will also make code more consistent with the
relevant check in unpoison_memory().
Link: https://lkml.kernel.org/r/20220830123604.25763-6-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Tue, 30 Aug 2022 12:36:02 +0000 (20:36 +0800)]
mm, hwpoison: avoid unneeded page_mapped_in_vma() overhead in collect_procs_anon()
If vma->vm_mm != t->mm, there's no need to call page_mapped_in_vma() as
add_to_kill() won't be called in this case. Move up the mm check to avoid
possible unneeded calling to page_mapped_in_vma().
Link: https://lkml.kernel.org/r/20220830123604.25763-5-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Tue, 30 Aug 2022 12:36:01 +0000 (20:36 +0800)]
mm, hwpoison: use num_poisoned_pages_sub() to decrease num_poisoned_pages
Use num_poisoned_pages_sub() to combine multiple atomic ops into one. Also
num_poisoned_pages_dec() can be killed as there's no caller now.
Link: https://lkml.kernel.org/r/20220830123604.25763-4-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Tue, 30 Aug 2022 12:36:00 +0000 (20:36 +0800)]
mm, hwpoison: use __PageMovable() to detect non-lru movable pages
It's more recommended to use __PageMovable() to detect non-lru movable
pages. We can avoid bumping page refcnt via isolate_movable_page() for
the isolated lru pages. Also if pages become PageLRU just after they're
checked but before trying to isolate them, isolate_lru_page() will be
called to do the right work.
[linmiaohe@huawei.com: fixes per Naoya Horiguchi]
Link: https://lkml.kernel.org/r/1f7ee86e-7d28-0d8c-e0de-b7a5a94519e8@huawei.com
Link: https://lkml.kernel.org/r/20220830123604.25763-3-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Tue, 30 Aug 2022 12:35:59 +0000 (20:35 +0800)]
mm, hwpoison: use ClearPageHWPoison() in memory_failure()
Patch series "A few cleanup patches for memory-failure".
his series contains a few cleanup patches to use __PageMovable() to detect
non-lru movable pages, use num_poisoned_pages_sub() to reduce multiple
atomic ops overheads and so on. More details can be found in the
respective changelogs.
This patch (of 6):
Use ClearPageHWPoison() instead of TestClearPageHWPoison() to clear page
hwpoison flags to avoid unneeded full memory barrier overhead.
Link: https://lkml.kernel.org/r/20220830123604.25763-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20220830123604.25763-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yang Shi [Wed, 14 Sep 2022 16:22:20 +0000 (09:22 -0700)]
mm: MADV_COLLAPSE: refetch vm_end after reacquiring mmap_lock
The syzbot reported the below problem:
BUG: Bad page map in process syz-executor198 pte:
8000000071c00227 pmd:
74b30067
addr:
0000000020563000 vm_flags:
08100077 anon_vma:
ffff8880547d2200 mapping:
0000000000000000 index:20563
file:(null) fault:0x0 mmap:0x0 read_folio:0x0
CPU: 1 PID: 3614 Comm: syz-executor198 Not tainted 6.0.0-rc3-next-
20220901-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_bad_pte.cold+0x2a7/0x2d0 mm/memory.c:565
vm_normal_page+0x10c/0x2a0 mm/memory.c:636
hpage_collapse_scan_pmd+0x729/0x1da0 mm/khugepaged.c:1199
madvise_collapse+0x481/0x910 mm/khugepaged.c:2433
madvise_vma_behavior+0xd0a/0x1cc0 mm/madvise.c:1062
madvise_walk_vmas+0x1c7/0x2b0 mm/madvise.c:1236
do_madvise.part.0+0x24a/0x340 mm/madvise.c:1415
do_madvise mm/madvise.c:1428 [inline]
__do_sys_madvise mm/madvise.c:1428 [inline]
__se_sys_madvise mm/madvise.c:1426 [inline]
__x64_sys_madvise+0x113/0x150 mm/madvise.c:1426
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f770ba87929
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 11 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007f770ba18308 EFLAGS:
00000246 ORIG_RAX:
000000000000001c
RAX:
ffffffffffffffda RBX:
00007f770bb0f3f8 RCX:
00007f770ba87929
RDX:
0000000000000019 RSI:
0000000000600003 RDI:
0000000020000000
RBP:
00007f770bb0f3f0 R08:
00007f770ba18700 R09:
0000000000000000
R10:
00007f770ba18700 R11:
0000000000000246 R12:
00007f770bb0f3fc
R13:
00007ffc2d8b62ef R14:
00007f770ba18400 R15:
0000000000022000
Basically the test program does the below conceptually:
1. mmap 0x2000000 - 0x21000000 as anonymous region
2. mmap io_uring SQ stuff at 0x20563000 with MAP_FIXED, io_uring_mmap()
actually remaps the pages with special PTEs
3. call MADV_COLLAPSE for 0x20000000 - 0x21000000
It actually triggered the below race:
CPU A CPU B
mmap 0x20000000 - 0x21000000 as anon
madvise_collapse is called on this area
Retrieve start and end address from the vma (NEVER updated later!)
Collapsed the first 2M area and dropped mmap_lock
Acquire mmap_lock
mmap io_uring file at 0x20563000
Release mmap_lock
Reacquire mmap_lock
revalidate vma pass since 0x20200000 + 0x200000 > 0x20563000
scan the next 2M (0x20200000 - 0x20400000), but due to whatever reason it didn't release mmap_lock
scan the 3rd 2M area (start from 0x20400000)
get into the vma created by io_uring
The hend should be updated after MADV_COLLAPSE reacquire mmap_lock since
the vma may be shrunk. We don't have to worry about shink from the other
direction since it could be caught by hugepage_vma_revalidate(). Either
no valid vma is found or the vma doesn't fit anymore.
Link: https://lkml.kernel.org/r/20220914162220.787703-1-shy828301@gmail.com
Fixes:
7d8faaf155454f8 ("mm/madvise: introduce MADV_COLLAPSE sync hugepage collapse")
Reported-by: syzbot+915f3e317adb0e85835f@syzkaller.appspotmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Morton [Mon, 26 Sep 2022 20:13:15 +0000 (13:13 -0700)]
Merge branch 'mm-hotfixes-stable' into mm-stable
Kees Cook [Mon, 19 Sep 2022 20:16:48 +0000 (13:16 -0700)]
x86/uaccess: avoid check_object_size() in copy_from_user_nmi()
The check_object_size() helper under CONFIG_HARDENED_USERCOPY is designed
to skip any checks where the length is known at compile time as a
reasonable heuristic to avoid "likely known-good" cases. However, it can
only do this when the copy_*_user() helpers are, themselves, inline too.
Using find_vmap_area() requires taking a spinlock. The
check_object_size() helper can call find_vmap_area() when the destination
is in vmap memory. If show_regs() is called in interrupt context, it will
attempt a call to copy_from_user_nmi(), which may call check_object_size()
and then find_vmap_area(). If something in normal context happens to be
in the middle of calling find_vmap_area() (with the spinlock held), the
interrupt handler will hang forever.
The copy_from_user_nmi() call is actually being called with a fixed-size
length, so check_object_size() should never have been called in the first
place. Given the narrow constraints, just replace the
__copy_from_user_inatomic() call with an open-coded version that calls
only into the sanitizers and not check_object_size(), followed by a call
to raw_copy_from_user().
[akpm@linux-foundation.org: no instrument_copy_from_user() in my tree...]
Link: https://lkml.kernel.org/r/20220919201648.2250764-1-keescook@chromium.org
Link: https://lore.kernel.org/all/CAOUHufaPshtKrTWOz7T7QFYUNVGFm0JBjvM700Nhf9qEL9b3EQ@mail.gmail.com
Fixes:
0aef499f3172 ("mm/usercopy: Detect vmalloc overruns")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Yu Zhao <yuzhao@google.com>
Reported-by: Florian Lehner <dev@der-flo.net>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Florian Lehner <dev@der-flo.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zi Yan [Wed, 14 Sep 2022 02:39:13 +0000 (22:39 -0400)]
mm/page_isolation: fix isolate_single_pageblock() isolation behavior
set_migratetype_isolate() does not allow isolating MIGRATE_CMA pageblocks
unless it is used for CMA allocation. isolate_single_pageblock() did not
have the same behavior when it is used together with
set_migratetype_isolate() in start_isolate_page_range(). This allows
alloc_contig_range() with migratetype other than MIGRATE_CMA, like
MIGRATE_MOVABLE (used by alloc_contig_pages()), to isolate first and last
pageblock but fail the rest. The failure leads to changing migratetype of
the first and last pageblock to MIGRATE_MOVABLE from MIGRATE_CMA,
corrupting the CMA region. This can happen during gigantic page
allocations.
Like Doug said here:
https://lore.kernel.org/linux-mm/
a3363a52-883b-dcd1-b77f-
f2bb378d6f2d@gmail.com/T/#u,
for gigantic page allocations, the user would notice no difference,
since the allocation on CMA region will fail as well as it did before.
But it might hurt the performance of device drivers that use CMA, since
CMA region size decreases.
Fix it by passing migratetype into isolate_single_pageblock(), so that
set_migratetype_isolate() used by isolate_single_pageblock() will prevent
the isolation happening.
Link: https://lkml.kernel.org/r/20220914023913.1855924-1-zi.yan@sent.com
Fixes:
b2c9e2fbba32 ("mm: make alloc_contig_range work at pageblock granularity")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: Doug Berger <opendmb@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shuai Xue [Wed, 14 Sep 2022 06:49:35 +0000 (14:49 +0800)]
mm,hwpoison: check mm when killing accessing process
The GHES code calls memory_failure_queue() from IRQ context to queue work
into workqueue and schedule it on the current CPU. Then the work is
processed in memory_failure_work_func() by kworker and calls
memory_failure().
When a page is already poisoned, commit
a3f5d80ea401 ("mm,hwpoison: send
SIGBUS with error virutal address") make memory_failure() call
kill_accessing_process() that:
- holds mmap locking of current->mm
- does pagetable walk to find the error virtual address
- and sends SIGBUS to the current process with error info.
However, the mm of kworker is not valid, resulting in a null-pointer
dereference. So check mm when killing the accessing process.
[akpm@linux-foundation.org: remove unrelated whitespace alteration]
Link: https://lkml.kernel.org/r/20220914064935.7851-1-xueshuai@linux.alibaba.com
Fixes:
a3f5d80ea401 ("mm,hwpoison: send SIGBUS with error virutal address")
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Bixuan Cui <cuibixuan@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Doug Berger [Wed, 14 Sep 2022 19:09:17 +0000 (12:09 -0700)]
mm/hugetlb: correct demote page offset logic
With gigantic pages it may not be true that struct page structures are
contiguous across the entire gigantic page. The nth_page macro is used
here in place of direct pointer arithmetic to correct for this.
Mike said:
: This error could cause addressing exceptions. However, this is only
: possible in configurations where CONFIG_SPARSEMEM &&
: !CONFIG_SPARSEMEM_VMEMMAP. Such a configuration option is rare and
: unknown to be the default anywhere.
Link: https://lkml.kernel.org/r/20220914190917.3517663-1-opendmb@gmail.com
Fixes:
8531fc6f52f5 ("hugetlb: add hugetlb demote page support")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Maurizio Lombardi [Fri, 15 Jul 2022 12:50:13 +0000 (14:50 +0200)]
mm: prevent page_frag_alloc() from corrupting the memory
A number of drivers call page_frag_alloc() with a fragment's size >
PAGE_SIZE.
In low memory conditions, __page_frag_cache_refill() may fail the order
3 cache allocation and fall back to order 0; In this case, the cache
will be smaller than the fragment, causing memory corruptions.
Prevent this from happening by checking if the newly allocated cache is
large enough for the fragment; if not, the allocation will fail and
page_frag_alloc() will return NULL.
Link: https://lkml.kernel.org/r/20220715125013.247085-1-mlombard@redhat.com
Fixes:
b63ae8ca096d ("mm/net: Rename and move page fragment handling from net/ to mm/")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Cc: Chen Lin <chen45464546@163.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sergei Antonov [Thu, 8 Sep 2022 20:48:09 +0000 (23:48 +0300)]
mm: bring back update_mmu_cache() to finish_fault()
Running this test program on ARMv4 a few times (sometimes just once)
reproduces the bug.
int main()
{
unsigned i;
char paragon[SIZE];
void* ptr;
memset(paragon, 0xAA, SIZE);
ptr = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
MAP_ANON | MAP_SHARED, -1, 0);
if (ptr == MAP_FAILED) return 1;
printf("ptr = %p\n", ptr);
for (i=0;i<10000;i++){
memset(ptr, 0xAA, SIZE);
if (memcmp(ptr, paragon, SIZE)) {
printf("Unexpected bytes on iteration %u!!!\n", i);
break;
}
}
munmap(ptr, SIZE);
}
In the "ptr" buffer there appear runs of zero bytes which are aligned
by 16 and their lengths are multiple of 16.
Linux v5.11 does not have the bug, "git bisect" finds the first bad commit:
f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths")
Before the commit update_mmu_cache() was called during a call to
filemap_map_pages() as well as finish_fault(). After the commit
finish_fault() lacks it.
Bring back update_mmu_cache() to finish_fault() to fix the bug.
Also call update_mmu_tlb() only when returning VM_FAULT_NOPAGE to more
closely reproduce the code of alloc_set_pte() function that existed before
the commit.
On many platforms update_mmu_cache() is nop:
x86, see arch/x86/include/asm/pgtable
ARMv6+, see arch/arm/include/asm/tlbflush.h
So, it seems, few users ran into this bug.
Link: https://lkml.kernel.org/r/20220908204809.2012451-1-saproj@gmail.com
Fixes:
f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths")
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Christoph Hellwig [Fri, 9 Sep 2022 13:08:29 +0000 (15:08 +0200)]
frontswap: don't call ->init if no ops are registered
If no frontswap module (i.e. zswap) was registered, frontswap_ops will be
NULL. In such situation, swapon crashes with the following stack trace:
Unable to handle kernel access to user memory outside uaccess routines at virtual address
0000000000000000
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=
00000020a4fab000
[
0000000000000000] pgd=
0000000000000000, p4d=
0000000000000000
Internal error: Oops:
96000004 [#1] SMP
Modules linked in: zram fsl_dpaa2_eth pcs_lynx phylink ahci_qoriq crct10dif_ce ghash_ce sbsa_gwdt fsl_mc_dpio nvme lm90 nvme_core at803x xhci_plat_hcd rtc_fsl_ftm_alarm xgmac_mdio ahci_platform i2c_imx ip6_tables ip_tables fuse
Unloaded tainted modules: cppc_cpufreq():1
CPU: 10 PID: 761 Comm: swapon Not tainted 6.0.0-rc2-00454-g22100432cf14 #1
Hardware name: SolidRun Ltd. SolidRun CEX7 Platform, BIOS EDK II Jun 21 2022
pstate:
00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : frontswap_init+0x38/0x60
lr : __do_sys_swapon+0x8a8/0x9f4
sp :
ffff80000969bcf0
x29:
ffff80000969bcf0 x28:
ffff37bee0d8fc00 x27:
ffff80000a7f5000
x26:
fffffcdefb971e80 x25:
ffffaba797453b90 x24:
0000000000000064
x23:
ffff37c1f209d1a8 x22:
ffff37bee880e000 x21:
ffffaba797748560
x20:
ffff37bee0d8fce4 x19:
ffffaba797748488 x18:
0000000000000014
x17:
0000000030ec029a x16:
ffffaba795a479b0 x15:
0000000000000000
x14:
0000000000000000 x13:
0000000000000030 x12:
0000000000000001
x11:
ffff37c63c0aba18 x10:
0000000000000000 x9 :
ffffaba7956b8c88
x8 :
ffff80000969bcd0 x7 :
0000000000000000 x6 :
0000000000000000
x5 :
0000000000000001 x4 :
0000000000000000 x3 :
ffffaba79730f000
x2 :
ffff37bee0d8fc00 x1 :
0000000000000000 x0 :
0000000000000000
Call trace:
frontswap_init+0x38/0x60
__do_sys_swapon+0x8a8/0x9f4
__arm64_sys_swapon+0x28/0x3c
invoke_syscall+0x78/0x100
el0_svc_common.constprop.0+0xd4/0xf4
do_el0_svc+0x38/0x4c
el0_svc+0x34/0x10c
el0t_64_sync_handler+0x11c/0x150
el0t_64_sync+0x190/0x194
Code:
d000e283 910003fd f9006c41 f946d461 (
f9400021)
---[ end trace
0000000000000000 ]---
Link: https://lkml.kernel.org/r/20220909130829.3262926-1-hch@lst.de
Fixes:
1da0d94a3ec8 ("frontswap: remove support for multiple ops")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Naoya Horiguchi [Thu, 8 Sep 2022 04:11:50 +0000 (13:11 +0900)]
mm/huge_memory: use pfn_to_online_page() in split_huge_pages_all()
NULL pointer dereference is triggered when calling thp split via debugfs
on the system with offlined memory blocks. With debug option enabled, the
following kernel messages are printed out:
page:
00000000467f4890 refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x121c000
flags: 0x17fffc00000000(node=0|zone=2|lastcpupid=0x1ffff)
raw:
0017fffc00000000 0000000000000000 dead000000000122 0000000000000000
raw:
0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: unmovable page
page:
000000007d7ab72e is uninitialized and poisoned
page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
------------[ cut here ]------------
kernel BUG at include/linux/mm.h:1248!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 16 PID: 20964 Comm: bash Tainted: G I 6.0.0-rc3-foll-numa+ #41
...
RIP: 0010:split_huge_pages_write+0xcf4/0xe30
This shows that page_to_nid() in page_zone() is unexpectedly called for an
offlined memmap.
Use pfn_to_online_page() to get struct page in PFN walker.
Link: https://lkml.kernel.org/r/20220908041150.3430269-1-naoya.horiguchi@linux.dev
Fixes:
f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after
d0dc12e86b319]
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org> [5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Minchan Kim [Thu, 8 Sep 2022 15:12:04 +0000 (08:12 -0700)]
mm: fix madivse_pageout mishandling on non-LRU page
MADV_PAGEOUT tries to isolate non-LRU pages and gets a warning from
isolate_lru_page below.
Fix it by checking PageLRU in advance.
------------[ cut here ]------------
trying to isolate tail page
WARNING: CPU: 0 PID: 6175 at mm/folio-compat.c:158 isolate_lru_page+0x130/0x140
Modules linked in:
CPU: 0 PID: 6175 Comm: syz-executor.0 Not tainted 5.18.12 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:isolate_lru_page+0x130/0x140
Link: https://lore.kernel.org/linux-mm/485f8c33.2471b.182d5726afb.Coremail.hantianshuo@iie.ac.cn/
Link: https://lkml.kernel.org/r/20220908151204.762596-1-minchan@kernel.org
Fixes:
1a4e58cce84e ("mm: introduce MADV_PAGEOUT")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: 韩天ç`\95 <hantianshuo@iie.ac.cn>
Suggested-by: Yang Shi <shy828301@gmail.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yang Shi [Wed, 7 Sep 2022 18:01:44 +0000 (11:01 -0700)]
powerpc/64s/radix: don't need to broadcast IPI for radix pmd collapse flush
The IPI broadcast is used to serialize against fast-GUP, but fast-GUP will
move to use RCU instead of disabling local interrupts in fast-GUP. Using
an IPI is the old-styled way of serializing against fast-GUP although it
still works as expected now.
And fast-GUP now fixed the potential race with THP collapse by checking
whether PMD is changed or not. So IPI broadcast in radix pmd collapse
flush is not necessary anymore. But it is still needed for hash TLB.
Link: https://lkml.kernel.org/r/20220907180144.555485-2-shy828301@gmail.com
Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yang Shi [Wed, 7 Sep 2022 18:01:43 +0000 (11:01 -0700)]
mm: gup: fix the fast GUP race against THP collapse
Since general RCU GUP fast was introduced in commit
2667f50e8b81 ("mm:
introduce a general RCU get_user_pages_fast()"), a TLB flush is no longer
sufficient to handle concurrent GUP-fast in all cases, it only handles
traditional IPI-based GUP-fast correctly. On architectures that send an
IPI broadcast on TLB flush, it works as expected. But on the
architectures that do not use IPI to broadcast TLB flush, it may have the
below race:
CPU A CPU B
THP collapse fast GUP
gup_pmd_range() <-- see valid pmd
gup_pte_range() <-- work on pte
pmdp_collapse_flush() <-- clear pmd and flush
__collapse_huge_page_isolate()
check page pinned <-- before GUP bump refcount
pin the page
check PTE <-- no change
__collapse_huge_page_copy()
copy data to huge page
ptep_clear()
install huge pmd for the huge page
return the stale page
discard the stale page
The race can be fixed by checking whether PMD is changed or not after
taking the page pin in fast GUP, just like what it does for PTE. If the
PMD is changed it means there may be parallel THP collapse, so GUP should
back off.
Also update the stale comment about serializing against fast GUP in
khugepaged.
Link: https://lkml.kernel.org/r/20220907180144.555485-1-shy828301@gmail.com
Fixes:
2667f50e8b81 ("mm: introduce a general RCU get_user_pages_fast()")
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Thu, 1 Sep 2022 08:35:59 +0000 (10:35 +0200)]
mm: fix PageAnonExclusive clearing racing with concurrent RCU GUP-fast
commit
6c287605fd56 ("mm: remember exclusively mapped anonymous pages with
PG_anon_exclusive") made sure that when PageAnonExclusive() has to be
cleared during temporary unmapping of a page, that the PTE is
cleared/invalidated and that the TLB is flushed.
What we want to achieve in all cases is that we cannot end up with a pin on
an anonymous page that may be shared, because such pins would be
unreliable and could result in memory corruptions when the mapped page
and the pin go out of sync due to a write fault.
That TLB flush handling was inspired by an outdated comment in
mm/ksm.c:write_protect_page(), which similarly required the TLB flush in
the past to synchronize with GUP-fast. However, ever since general RCU GUP
fast was introduced in commit
2667f50e8b81 ("mm: introduce a general RCU
get_user_pages_fast()"), a TLB flush is no longer sufficient to handle
concurrent GUP-fast in all cases -- it only handles traditional IPI-based
GUP-fast correctly.
Peter Xu (thankfully) questioned whether that TLB flush is really
required. On architectures that send an IPI broadcast on TLB flush,
it works as expected. To synchronize with RCU GUP-fast properly, we're
conceptually fine, however, we have to enforce a certain memory order and
are missing memory barriers.
Let's document that, avoid the TLB flush where possible and use proper
explicit memory barriers where required. We shouldn't really care about the
additional memory barriers here, as we're not on extremely hot paths --
and we're getting rid of some TLB flushes.
We use a smp_mb() pair for handling concurrent pinning and a
smp_rmb()/smp_wmb() pair for handling the corner case of only temporary
PTE changes but permanent PageAnonExclusive changes.
One extreme example, whereby GUP-fast takes a R/O pin and KSM wants to
convert an exclusive anonymous page to a KSM page, and that page is already
mapped write-protected (-> no PTE change) would be:
Thread 0 (KSM) Thread 1 (GUP-fast)
(B1) Read the PTE
# (B2) skipped without FOLL_WRITE
(A1) Clear PTE
smp_mb()
(A2) Check pinned
(B3) Pin the mapped page
smp_mb()
(A3) Clear PageAnonExclusive
smp_wmb()
(A4) Restore PTE
(B4) Check if the PTE changed
smp_rmb()
(B5) Check PageAnonExclusive
Thread 1 will properly detect that PageAnonExclusive was cleared and
back off.
Note that we don't need a memory barrier between checking if the page is
pinned and clearing PageAnonExclusive, because stores are not
speculated.
The possible issues due to reordering are of theoretical nature so far
and attempts to reproduce the race failed.
Especially the "no PTE change" case isn't the common case, because we'd
need an exclusive anonymous page that's mapped R/O and the PTE is clean
in KSM code -- and using KSM with page pinning isn't extremely common.
Further, the clear+TLB flush we used for now implies a memory barrier.
So the problematic missing part should be the missing memory barrier
after pinning but before checking if the PTE changed.
Link: https://lkml.kernel.org/r/20220901083559.67446-1-david@redhat.com
Fixes:
6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Christoph von Recklinghausen <crecklin@redhat.com>
Cc: Don Dutile <ddutile@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Christophe JAILLET [Fri, 2 Sep 2022 16:39:52 +0000 (18:39 +0200)]
mm/mremap_pages: save a few cycles in get_dev_pagemap()
Use 'percpu_ref_tryget_live_rcu()' instead of 'percpu_ref_tryget_live()'
to save a few cycles when it is known that the rcu lock is already
taken/released.
Link: https://lkml.kernel.org/r/9ef1562a1975371360f3e263856e9f1c5749b656.1662136782.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kefeng Wang [Thu, 1 Sep 2022 01:50:43 +0000 (09:50 +0800)]
mm: remove BUG_ON() in __isolate_free_page()
Drop unneed comment and blank, adjust the variable, and the most important
is to delete BUG_ON(). The page passed is always buddy page into
__isolate_free_page() from compaction, page_isolation and page_reporting,
and the caller also check the return, BUG_ON() is a too drastic measure,
remove it.
Link: https://lkml.kernel.org/r/20220901015043.189276-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liu Shixin [Thu, 1 Sep 2022 02:30:07 +0000 (10:30 +0800)]
mm/kmemleak: make create_object return void
No caller cares about the return value of create_object(), so make it
return void.
Link: https://lkml.kernel.org/r/20220901023007.3471887-1-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tarun Sahu [Thu, 1 Sep 2022 09:23:15 +0000 (14:53 +0530)]
selftest: vm: remove deleted local_config.* from .gitignore
Commit
d2d6cba5d6623 ("selftest: vm: remove orphaned references to
local_config.{h,mk}") took care of removing orphaned references. This
commit removes local_config from .gitignore.
Parent patch commit
69007f156ba ("Kselftests: remove support of
libhugetlbfs from kselftests")
Link: https://lkml.kernel.org/r/20220901092315.33619-1-tsahu@linux.ibm.com
Signed-off-by: Tarun Sahu <tsahu@linux.ibm.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 1 Sep 2022 12:00:30 +0000 (20:00 +0800)]
hugetlb: make hugetlb depends on SYSFS or SYSCTL
If CONFIG_SYSFS and CONFIG_SYSCTL are both undefined, hugetlb doesn't work
now as there's no way to set max huge pages. Make sure at least one of the
above configs is defined to make hugetlb works as expected.
Link: https://lkml.kernel.org/r/20220901120030.63318-11-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 1 Sep 2022 12:00:29 +0000 (20:00 +0800)]
hugetlb: remove meaningless BUG_ON(huge_pte_none())
When code reaches here, invalid page would have been accessed if huge pte
is none. So this BUG_ON(huge_pte_none()) is meaningless. Remove it.
Link: https://lkml.kernel.org/r/20220901120030.63318-10-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 1 Sep 2022 12:00:28 +0000 (20:00 +0800)]
hugetlb: add comment for subtle SetHPageVmemmapOptimized()
The SetHPageVmemmapOptimized() called here seems unnecessary as it's
assumed to be set when calling this function. But it's indeed cleared
by above set_page_private(page, 0). Add a comment to avoid possible
future confusion.
Link: https://lkml.kernel.org/r/20220901120030.63318-9-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 1 Sep 2022 12:00:27 +0000 (20:00 +0800)]
hugetlb: kill hugetlbfs_pagecache_page()
Fold hugetlbfs_pagecache_page() into its sole caller to remove some
duplicated code. No functional change intended.
Link: https://lkml.kernel.org/r/20220901120030.63318-8-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 1 Sep 2022 12:00:26 +0000 (20:00 +0800)]
hugetlb: pass NULL to kobj_to_hstate() if nid is unused
We can pass NULL to kobj_to_hstate() directly when nid is unused to
simplify the code. No functional change intended.
Link: https://lkml.kernel.org/r/20220901120030.63318-7-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 1 Sep 2022 12:00:25 +0000 (20:00 +0800)]
hugetlb: use helper {huge_pte|pmd}_lock()
Use helper huge_pte_lock and pmd_lock to simplify the code. No functional
change intended.
Link: https://lkml.kernel.org/r/20220901120030.63318-6-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 1 Sep 2022 12:00:24 +0000 (20:00 +0800)]
hugetlb: use sizeof() to get the array size
It's better to use sizeof() to get the array size instead of manual
calculation. Minor readability improvement.
Link: https://lkml.kernel.org/r/20220901120030.63318-5-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 1 Sep 2022 12:00:23 +0000 (20:00 +0800)]
hugetlb: use LIST_HEAD() to define a list head
Use LIST_HEAD() directly to define a list head to simplify the code.
No functional change intended.
Link: https://lkml.kernel.org/r/20220901120030.63318-4-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 1 Sep 2022 12:00:22 +0000 (20:00 +0800)]
hugetlb: Use helper macro SZ_1K
Use helper macro SZ_1K to do the size conversion to make code more
consistent in this file. Minor readability improvement.
Link: https://lkml.kernel.org/r/20220901120030.63318-3-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 1 Sep 2022 12:00:21 +0000 (20:00 +0800)]
hugetlb: make hugetlb_cma_check() static
Patch series "A few cleanup patches for hugetlb", v2.
This series contains a few cleanup patches to use helper functions to
simplify the codes, remove unneeded nid parameter and so on. More
details can be found in the respective changelogs.
This patch (of 10):
Make hugetlb_cma_check() static as it's only used inside mm/hugetlb.c.
Link: https://lkml.kernel.org/r/20220901120030.63318-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20220901120030.63318-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zhang Yi [Thu, 1 Sep 2022 13:35:05 +0000 (21:35 +0800)]
fs/buffer: remove bh_submit_read() helper
bh_submit_read() has no user anymore, just remove it.
Link: https://lkml.kernel.org/r/20220901133505.2510834-15-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zhang Yi [Thu, 1 Sep 2022 13:35:04 +0000 (21:35 +0800)]
ext2: replace bh_submit_read() helper with bh_read()
bh_submit_read() and the uptodate check logic in bh_uptodate_or_lock()
has been integrated in bh_read() helper, so switch to use it directly.
Link: https://lkml.kernel.org/r/20220901133505.2510834-14-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zhang Yi [Thu, 1 Sep 2022 13:35:03 +0000 (21:35 +0800)]
fs/buffer: remove ll_rw_block() helper
Now that all ll_rw_block() users has been replaced to new safe helpers,
we just remove it here.
Link: https://lkml.kernel.org/r/20220901133505.2510834-13-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zhang Yi [Thu, 1 Sep 2022 13:35:02 +0000 (21:35 +0800)]
ufs: replace ll_rw_block()
ll_rw_block() is not safe for the sync read path because it cannot
guarantee that submitting read IO if the buffer has been locked. We
could get false positive EIO after wait_on_buffer() if the buffer has
been locked by others. So stop using ll_rw_block() in ufs.
Link: https://lkml.kernel.org/r/20220901133505.2510834-12-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zhang Yi [Thu, 1 Sep 2022 13:35:01 +0000 (21:35 +0800)]
udf: replace ll_rw_block()
ll_rw_block() is not safe for the sync read path because it cannot
guarantee that submitting read IO if the buffer has been locked. We
could get false positive EIO after wait_on_buffer() if the buffer has
been locked by others. So stop using ll_rw_block(). We also switch to
new bh_readahead_batch() helper for the buffer array readahead path.
Link: https://lkml.kernel.org/r/20220901133505.2510834-11-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zhang Yi [Thu, 1 Sep 2022 13:35:00 +0000 (21:35 +0800)]
reiserfs: replace ll_rw_block()
ll_rw_block() is not safe for the sync read/write path because it cannot
guarantee that submitting read/write IO if the buffer has been locked.
We could get false positive EIO after wait_on_buffer() in read path if
the buffer has been locked by others. So stop using ll_rw_block() in
reiserfs. We also switch to new bh_readahead_batch() helper for the
buffer array readahead path.
Link: https://lkml.kernel.org/r/20220901133505.2510834-10-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zhang Yi [Thu, 1 Sep 2022 13:34:59 +0000 (21:34 +0800)]
ocfs2: replace ll_rw_block()
ll_rw_block() is not safe for the sync read path because it cannot
guarantee that submitting read IO if the buffer has been locked. We
could get false positive EIO after wait_on_buffer() if the buffer has
been locked by others. So stop using ll_rw_block() in ocfs2.
Link: https://lkml.kernel.org/r/20220901133505.2510834-9-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zhang Yi [Thu, 1 Sep 2022 13:34:58 +0000 (21:34 +0800)]
ntfs3: replace ll_rw_block()
ll_rw_block() is not safe for the sync read path because it cannot
guarantee that submitting read IO if the buffer has been locked. We
could get false positive EIO after wait_on_buffer() if the buffer has
been locked by others. So stop using ll_rw_block() in
ntfs_get_block_vbo().
Link: https://lkml.kernel.org/r/20220901133505.2510834-8-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zhang Yi [Thu, 1 Sep 2022 13:34:57 +0000 (21:34 +0800)]
jbd2: replace ll_rw_block()
ll_rw_block() is not safe for the sync read path because it cannot
guarantee that submitting read IO if the buffer has been locked. We
could get false positive EIO after wait_on_buffer() if the buffer has
been locked by others. So stop using ll_rw_block() in
journal_get_superblock(). We also switch to new bh_readahead_batch()
for the buffer array readahead path.
Link: https://lkml.kernel.org/r/20220901133505.2510834-7-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zhang Yi [Thu, 1 Sep 2022 13:34:56 +0000 (21:34 +0800)]
isofs: replace ll_rw_block()
ll_rw_block() is not safe for the sync read path because it cannot
guarantee that submitting read IO if the buffer has been locked. We
could get false positive EIO return from zisofs_uncompress_block() if
he buffer has been locked by others. So stop using ll_rw_block(),
switch to sync helper instead.
Link: https://lkml.kernel.org/r/20220901133505.2510834-6-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zhang Yi [Thu, 1 Sep 2022 13:34:55 +0000 (21:34 +0800)]
gfs2: replace ll_rw_block()
ll_rw_block() is not safe for the sync read path because it cannot
guarantee that always submitting read IO if the buffer has been locked,
so stop using it. We also switch to new bh_readahead() helper for the
readahead path.
Link: https://lkml.kernel.org/r/20220901133505.2510834-5-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zhang Yi [Thu, 1 Sep 2022 13:34:54 +0000 (21:34 +0800)]
fs/buffer: replace ll_rw_block()
ll_rw_block() is not safe for the sync IO path because it skip buffers
which has been locked by others, it could lead to false positive EIO
when submitting read IO. So stop using ll_rw_block(), switch to use new
helpers which could guarantee buffer locked and submit IO if needed.
Link: https://lkml.kernel.org/r/20220901133505.2510834-4-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zhang Yi [Thu, 1 Sep 2022 13:34:53 +0000 (21:34 +0800)]
fs/buffer: add some new buffer read helpers
Current ll_rw_block() helper is fragile because it assumes that locked
buffer means it's under IO which is submitted by some other who holds
the lock, it skip buffer if it failed to get the lock, so it's only
safe on the readahead path. Unfortunately, now that most filesystems
still use this helper mistakenly on the sync metadata read path. There
is no guarantee that the one who holds the buffer lock always submit IO
(e.g. buffer_migrate_folio_norefs() after commit
88dbcbb3a484 ("blkdev:
avoid migration stalls for blkdev pages"), it could lead to false
positive -EIO when submitting reading IO.
This patch add some friendly buffer read helpers to prepare replacing
ll_rw_block() and similar calls. We can only call bh_readahead_[]
helpers for the readahead paths.
Link: https://lkml.kernel.org/r/20220901133505.2510834-3-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zhang Yi [Thu, 1 Sep 2022 13:34:52 +0000 (21:34 +0800)]
fs/buffer: remove __breadahead_gfp()
Patch series "fs/buffer: remove ll_rw_block()", v2.
ll_rw_block() will skip locked buffer before submitting IO, it assumes
that locked buffer means it is under IO. This assumption is not always
true because we cannot guarantee every buffer lock path would submit IO.
After commit
88dbcbb3a484 ("blkdev: avoid migration stalls for blkdev
pages"), buffer_migrate_folio_norefs() becomes one exceptional case, and
there may be others. So ll_rw_block() is not safe on the sync read path,
we could get false positive EIO return value when filesystem reading
metadata. It seems that it could be only used on the readahead path.
Unfortunately, many filesystem misuse the ll_rw_block() on the sync read
path. This patch set just remove ll_rw_block() and add new friendly
helpers, which could prevent false positive EIO on the read metadata path.
Thanks for the suggestion from Jan, the original discussion is at [1].
patch 1: remove unused helpers in fs/buffer.c
patch 2: add new bh_read_[*] helpers
patch 3-11: remove all ll_rw_block() calls in filesystems
patch 12-14: do some leftover cleanups.
[1]. https://lore.kernel.org/linux-mm/
20220825080146.2021641-1-chengzhihao1@huawei.com/
This patch (of 14):
No one use __breadahead_gfp() and sb_breadahead_unmovable() any more,
remove them.
Link: https://lkml.kernel.org/r/20220901133505.2510834-1-yi.zhang@huawei.com
Link: https://lkml.kernel.org/r/20220901133505.2510834-2-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Heming Zhao <ocfs2-devel@oss.oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Song Liu [Wed, 31 Aug 2022 05:27:34 +0000 (22:27 -0700)]
mm/vmalloc: extend find_vmap_lowest_match_check with extra arguments
find_vmap_lowest_match() is now able to handle different roots. With
DEBUG_AUGMENT_LOWEST_MATCH_CHECK enabled as:
: --- a/mm/vmalloc.c
: +++ b/mm/vmalloc.c
: @@ -713,7 +713,7 @@ EXPORT_SYMBOL(vmalloc_to_pfn);
: /*** Global kva allocator ***/
:
: -#define DEBUG_AUGMENT_LOWEST_MATCH_CHECK 0
: +#define DEBUG_AUGMENT_LOWEST_MATCH_CHECK 1
compilation failed as:
mm/vmalloc.c: In function 'find_vmap_lowest_match_check':
mm/vmalloc.c:1328:32: warning: passing argument 1 of 'find_vmap_lowest_match' makes pointer from integer without a cast [-Wint-conversion]
1328 | va_1 = find_vmap_lowest_match(size, align, vstart, false);
| ^~~~
| |
| long unsigned int
mm/vmalloc.c:1236:40: note: expected 'struct rb_root *' but argument is of type 'long unsigned int'
1236 | find_vmap_lowest_match(struct rb_root *root, unsigned long size,
| ~~~~~~~~~~~~~~~~^~~~
mm/vmalloc.c:1328:9: error: too few arguments to function 'find_vmap_lowest_match'
1328 | va_1 = find_vmap_lowest_match(size, align, vstart, false);
| ^~~~~~~~~~~~~~~~~~~~~~
mm/vmalloc.c:1236:1: note: declared here
1236 | find_vmap_lowest_match(struct rb_root *root, unsigned long size,
| ^~~~~~~~~~~~~~~~~~~~~~
Extend find_vmap_lowest_match_check() and find_vmap_lowest_linear_match()
with extra arguments to fix this.
Link: https://lkml.kernel.org/r/20220906060548.1127396-1-song@kernel.org
Link: https://lkml.kernel.org/r/20220831052734.3423079-1-song@kernel.org
Fixes:
f9863be49312 ("mm/vmalloc: extend __alloc_vmap_area() with extra arguments")
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alistair Popple [Tue, 30 Aug 2022 02:01:38 +0000 (12:01 +1000)]
mm/migrate_device.c: fix a misleading and outdated comment
Commit
ab09243aa95a ("mm/migrate.c: remove MIGRATE_PFN_LOCKED") changed
the way trylock_page() in migrate_vma_collect_pmd() works without updating
the comment. Reword the comment to be less misleading and a better
reflection of what happens.
Link: https://lkml.kernel.org/r/20220830020138.497063-1-apopple@nvidia.com
Fixes:
ab09243aa95a ("mm/migrate.c: remove MIGRATE_PFN_LOCKED")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reported-by: Peter Xu <peterx@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
zezuo [Wed, 31 Aug 2022 01:34:04 +0000 (01:34 +0000)]
mm/page_alloc.c: delete a redundant parameter of rmqueue_pcplist
The gfp_flags parameter is not used in rmqueue_pcplist, so directly delete
this parameter.
Link: https://lkml.kernel.org/r/20220831013404.3360714-1-zuoze1@huawei.com
Signed-off-by: zezuo <zuoze1@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kaixu Xia [Mon, 29 Aug 2022 09:46:06 +0000 (17:46 +0800)]
mm/damon: get the hotness from damon_hot_score() in damon_pageout_score()
We can get the hotness value from damon_hot_score() directly in
damon_pageout_score() function and improve the code readability.
Link: https://lkml.kernel.org/r/1661766366-20998-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liu Shixin [Mon, 29 Aug 2022 09:51:25 +0000 (17:51 +0800)]
mm/thp: remove redundant CONFIG_TRANSPARENT_HUGEPAGE
Simplify code by removing redundant CONFIG_TRANSPARENT_HUGEPAGE judgment.
No functional change.
Link: https://lkml.kernel.org/r/20220829095125.3284567-1-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liu Shixin [Mon, 29 Aug 2022 09:57:09 +0000 (17:57 +0800)]
mm/thp: simplify has_transparent_hugepage by using IS_BUILTIN
Simplify code of has_transparent_hugepage define by using IS_BUILTIN.
No functional change.
Link: https://lkml.kernel.org/r/20220829095709.3287462-1-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kaixu Xia [Sat, 27 Aug 2022 09:02:51 +0000 (17:02 +0800)]
mm/damon/vaddr: remove comparison between mm and last_mm when checking region accesses
The damon regions that belong to the same damon target have the same
'struct mm_struct *mm', so it's unnecessary to compare the mm and last_mm
objects among the damon regions in one damon target when checking
accesses. But the check is necessary when the target changed in
'__damon_va_check_accesses()', so we can simplify the whole operation by
using the bool 'same_target' to indicate whether the target changed.
Link: https://lkml.kernel.org/r/1661590971-20893-3-git-send-email-kaixuxia@tencent.com
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kaixu Xia [Sat, 27 Aug 2022 09:02:50 +0000 (17:02 +0800)]
mm/damon: simplify the parameter passing for 'check_accesses'
Patch series "mm/damon: Simplify the damon regions access check", v2.
This patchset simplifies the operations when checking the damon regions
accesses.
This patch (of 2):
The parameter 'struct damon_ctx *ctx' isn't used in the functions
__damon_{p,v}a_check_access(), so we can remove it and simplify the
parameter passing.
Link: https://lkml.kernel.org/r/1661590971-20893-1-git-send-email-kaixuxia@tencent.com
Link: https://lkml.kernel.org/r/1661590971-20893-2-git-send-email-kaixuxia@tencent.com
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kefeng Wang [Sat, 27 Aug 2022 11:19:59 +0000 (19:19 +0800)]
mm: fix null-ptr-deref in kswapd_is_running()
kswapd_run/stop() will set pgdat->kswapd to NULL, which could race with
kswapd_is_running() in kcompactd(),
kswapd_run/stop() kcompactd()
kswapd_is_running()
pgdat->kswapd // error or nomal ptr
verify pgdat->kswapd
// load non-NULL
pgdat->kswapd
pgdat->kswapd = NULL
task_is_running(pgdat->kswapd)
// Null pointer derefence
KASAN reports the null-ptr-deref shown below,
vmscan: Failed to start kswapd on node 0
...
BUG: KASAN: null-ptr-deref in kcompactd+0x440/0x504
Read of size 8 at addr
0000000000000024 by task kcompactd0/37
CPU: 0 PID: 37 Comm: kcompactd0 Kdump: loaded Tainted: G OE 5.10.60 #1
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
dump_backtrace+0x0/0x394
show_stack+0x34/0x4c
dump_stack+0x158/0x1e4
__kasan_report+0x138/0x140
kasan_report+0x44/0xdc
__asan_load8+0x94/0xd0
kcompactd+0x440/0x504
kthread+0x1a4/0x1f0
ret_from_fork+0x10/0x18
At present kswapd/kcompactd_run() and kswapd/kcompactd_stop() are protected
by mem_hotplug_begin/done(), but without kcompactd(). There is no need to
involve memory hotplug lock in kcompactd(), so let's add a new mutex to
protect pgdat->kswapd accesses.
Also, because the kcompactd task will check the state of kswapd task, it's
better to call kcompactd_stop() before kswapd_stop() to reduce lock
conflicts.
[akpm@linux-foundation.org: add comments]
Link: https://lkml.kernel.org/r/20220827111959.186838-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kefeng Wang [Sat, 27 Aug 2022 11:20:43 +0000 (19:20 +0800)]
mm: kill is_memblock_offlined()
Directly check state of struct memory_block, no need a single function.
Link: https://lkml.kernel.org/r/20220827112043.187028-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vishal Moola (Oracle) [Wed, 24 Aug 2022 00:40:23 +0000 (17:40 -0700)]
filemap: remove find_get_pages_contig()
All callers of find_get_pages_contig() have been removed, so it is no
longer needed.
Link: https://lkml.kernel.org/r/20220824004023.77310-8-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterba@suse.com>
Cc: David Sterba <dsterb@suse.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vishal Moola (Oracle) [Wed, 24 Aug 2022 00:40:22 +0000 (17:40 -0700)]
ramfs: convert ramfs_nommu_get_unmapped_area() to use filemap_get_folios_contig()
Convert to use folios throughout. This is in preparation for the removal
for find_get_pages_contig(). Now also supports large folios.
The initial version of this function set the page_address to be returned
after finishing all the checks. Since folio_batches have a maximum of 15
folios, the function had to be modified to support getting and checking up
to lpages, 15 pages at a time while still returning the initial page
address. Now the function sets ret as soon as the first batch arrives,
and updates it only if a check fails.
The physical adjacency check utilizes the page frame numbers. The page
frame number of each folio must be nr_pages away from the first folio.
Link: https://lkml.kernel.org/r/20220824004023.77310-7-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterba@suse.com>
Cc: David Sterba <dsterb@suse.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vishal Moola (Oracle) [Wed, 24 Aug 2022 00:40:21 +0000 (17:40 -0700)]
nilfs2: convert nilfs_find_uncommited_extent() to use filemap_get_folios_contig()
Convert function to use folios throughout. This is in preparation for the
removal of find_get_pages_contig(). Now also supports large folios.
Also clean up an unnecessary if statement - pvec.pages[0]->index > index
will always evaluate to false, and filemap_get_folios_contig() returns 0
if there is no folio found at index.
Link: https://lkml.kernel.org/r/20220824004023.77310-6-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterba@suse.com>
Cc: David Sterba <dsterb@suse.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vishal Moola (Oracle) [Wed, 24 Aug 2022 00:40:20 +0000 (17:40 -0700)]
btrfs: convert process_page_range() to use filemap_get_folios_contig()
Converted function to use folios throughout. This is in preparation for
the removal of find_get_pages_contig(). Now also supports large folios.
Since we may receive more than nr_pages pages, nr_pages may underflow.
Since nr_pages > 0 is equivalent to index <= end_index, we replaced it
with this check instead.
Also minor comment renaming for consistency in subpage.
Link: https://lkml.kernel.org/r/20220824004023.77310-5-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: David Sterba <dsterb@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vishal Moola (Oracle) [Wed, 24 Aug 2022 00:40:19 +0000 (17:40 -0700)]
btrfs: convert end_compressed_writeback() to use filemap_get_folios()
Converted function to use folios throughout. This is in preparation for
the removal of find_get_pages_contig(). Now also supports large folios.
Since we may receive more than nr_pages pages, nr_pages may underflow.
Since nr_pages > 0 is equivalent to index <= end_index, we replaced it
with this check instead.
Also this function does not care about the pages being contiguous so we
can just use filemap_get_folios() to be more efficient.
Link: https://lkml.kernel.org/r/20220824004023.77310-4-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: David Sterba <dsterba@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterb@suse.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vishal Moola (Oracle) [Wed, 24 Aug 2022 00:40:18 +0000 (17:40 -0700)]
btrfs: convert __process_pages_contig() to use filemap_get_folios_contig()
Convert to use folios throughout. This is in preparation for the removal
of find_get_pages_contig(). Now also supports large folios.
Since we may receive more than nr_pages pages, nr_pages may underflow.
Since nr_pages > 0 is equivalent to index <= end_index, we replaced it
with this check instead.
Link: https://lkml.kernel.org/r/20220824004023.77310-3-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: David Sterba <dsterba@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterb@suse.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vishal Moola (Oracle) [Wed, 24 Aug 2022 00:40:17 +0000 (17:40 -0700)]
filemap: add filemap_get_folios_contig()
Patch series "Convert to filemap_get_folios_contig()", v3.
This patch series replaces find_get_pages_contig() with
filemap_get_folios_contig().
This patch (of 7):
This function is meant to replace find_get_pages_contig().
Unlike find_get_pages_contig(), filemap_get_folios_contig() no longer
takes in a target number of pages to find - It returns up to 15 contiguous
folios.
To be more consistent with filemap_get_folios(),
filemap_get_folios_contig() now also updates the start index passed in,
and takes an end index.
Link: https://lkml.kernel.org/r/20220824004023.77310-1-vishal.moola@gmail.com
Link: https://lkml.kernel.org/r/20220824004023.77310-2-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Sterba <dsterb@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alexey Romanov [Wed, 24 Aug 2022 11:31:17 +0000 (14:31 +0300)]
zram: don't retry compress incompressible page
It doesn't make sense for us to retry to compress an uncompressible page
(comp_len == PAGE_SIZE) in zsmalloc slowpath, because we will be storing
it uncompressed anyway. We can avoid wasting time on another compression
attempt. It is enough to take lock (zcomp_stream_get) and execute the
code below.
Link: https://lkml.kernel.org/r/20220824113117.78849-1-avromanov@sberdevices.ru
Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Alexey Romanov <avromanov@sberdevices.ru>
Cc: Dmitry Rokosov <DDRokosov@sberdevices.ru>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ye xingchen [Fri, 26 Aug 2022 07:19:06 +0000 (07:19 +0000)]
mm: backing-dev: Remove the unneeded result variable
Return the value cgwb_bdi_init() directly instead of storing it in another
redundant variable.
Link: https://lkml.kernel.org/r/20220826071906.252419-1-ye.xingchen@zte.com.cn
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Li Zhe [Thu, 25 Aug 2022 10:27:14 +0000 (18:27 +0800)]
page_ext: introduce boot parameter 'early_page_ext'
In commit
2f1ee0913ce5 ("Revert "mm: use early_pfn_to_nid in
page_ext_init""), we call page_ext_init() after page_alloc_init_late() to
avoid some panic problem. It seems that we cannot track early page
allocations in current kernel even if page structure has been initialized
early.
This patch introduces a new boot parameter 'early_page_ext' to resolve
this problem. If we pass it to the kernel, page_ext_init() will be moved
up and the feature 'deferred initialization of struct pages' will be
disabled to initialize the page allocator early and prevent the panic
problem above. It can help us to catch early page allocations. This is
useful especially when we find that the free memory value is not the same
right after different kernel booting.
[akpm@linux-foundation.org: fix section issue by removing __meminitdata]
Link: https://lkml.kernel.org/r/20220825102714.669-1-lizhe.67@bytedance.com
Signed-off-by: Li Zhe <lizhe.67@bytedance.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Gerald Schaefer [Mon, 12 Sep 2022 03:26:01 +0000 (20:26 -0700)]
s390/hugetlb: switch to generic version of follow_huge_pud()
When pud-sized hugepages were introduced for s390, the generic version of
follow_huge_pud() was using pte_page() instead of pud_page(). This would
be wrong for s390, see also commit
97534127012f ("mm/hugetlb: use
pmd_page() in follow_huge_pmd()"). Therefore, and probably because not
all archs were supporting pud_page() at that time, a private version of
follow_huge_pud() was added for s390, correctly using pud_page().
Since commit
3a194f3f8ad01 ("mm/hugetlb: make pud_huge() and
follow_huge_pud() aware of non-present pud entry"), the generic version of
follow_huge_pud() is now also using pud_page(), and in general behaves
similar to follow_huge_pmd().
Therefore we can now switch to the generic version and get rid of the
s390-specific follow_huge_pud().
Link: https://lkml.kernel.org/r/20220818135717.609eef8a@thinkpad
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Haiyue Wang <haiyue.wang@intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shakeel Butt [Thu, 25 Aug 2022 00:05:06 +0000 (00:05 +0000)]
memcg: increase MEMCG_CHARGE_BATCH to 64
For several years, MEMCG_CHARGE_BATCH was kept at 32 but with bigger
machines and the network intensive workloads requiring througput in Gbps,
32 is too small and makes the memcg charging path a bottleneck. For now,
increase it to 64 for easy acceptance to 6.0. We will need to revisit
this in future for ever increasing demand of higher performance.
Please note that the memcg charge path drain the per-cpu memcg charge
stock, so there should not be any oom behavior change. Though it does
have impact on rstat flushing and high limit reclaim backoff.
To evaluate the impact of this optimization, on a 72 CPUs machine, we
ran the following workload in a three level of cgroup hierarchy.
$ netserver -6
# 36 instances of netperf with following params
$ netperf -6 -H ::1 -l 60 -t TCP_SENDFILE -- -m 10K
Results (average throughput of netperf):
Without (6.0-rc1) 10482.7 Mbps
With patch 17064.7 Mbps (62.7% improvement)
With the patch, the throughput improved by 62.7%.
Link: https://lkml.kernel.org/r/20220825000506.239406-4-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shakeel Butt [Thu, 25 Aug 2022 00:05:05 +0000 (00:05 +0000)]
mm: page_counter: rearrange struct page_counter fields
With memcg v2 enabled, memcg->memory.usage is a very hot member for the
workloads doing memcg charging on multiple CPUs concurrently.
Particularly the network intensive workloads. In addition, there is a
false cache sharing between memory.usage and memory.high on the charge
path. This patch moves the usage into a separate cacheline and move all
the read most fields into separate cacheline.
To evaluate the impact of this optimization, on a 72 CPUs machine, we ran
the following workload in a three level of cgroup hierarchy.
$ netserver -6
# 36 instances of netperf with following params
$ netperf -6 -H ::1 -l 60 -t TCP_SENDFILE -- -m 10K
Results (average throughput of netperf):
Without (6.0-rc1) 10482.7 Mbps
With patch 12413.7 Mbps (18.4% improvement)
With the patch, the throughput improved by 18.4%.
One side-effect of this patch is the increase in the size of struct
mem_cgroup. For example with this patch on 64 bit build, the size of
struct mem_cgroup increased from 4032 bytes to 4416 bytes. However for
the performance improvement, this additional size is worth it. In
addition there are opportunities to reduce the size of struct mem_cgroup
like deprecation of kmem and tcpmem page counters and better packing.
Link: https://lkml.kernel.org/r/20220825000506.239406-3-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shakeel Butt [Thu, 25 Aug 2022 00:05:04 +0000 (00:05 +0000)]
mm: page_counter: remove unneeded atomic ops for low/min
Patch series "memcg: optimize charge codepath", v2.
Recently Linux networking stack has moved from a very old per socket
pre-charge caching to per-cpu caching to avoid pre-charge fragmentation
and unwarranted OOMs. One impact of this change is that for network
traffic workloads, memcg charging codepath can become a bottleneck. The
kernel test robot has also reported this regression[1]. This patch series
tries to improve the memcg charging for such workloads.
This patch series implement three optimizations:
(A) Reduce atomic ops in page counter update path.
(B) Change layout of struct page_counter to eliminate false sharing
between usage and high.
(C) Increase the memcg charge batch to 64.
To evaluate the impact of these optimizations, on a 72 CPUs machine, we
ran the following workload in root memcg and then compared with scenario
where the workload is run in a three level of cgroup hierarchy with top
level having min and low setup appropriately.
$ netserver -6
# 36 instances of netperf with following params
$ netperf -6 -H ::1 -l 60 -t TCP_SENDFILE -- -m 10K
Results (average throughput of netperf):
1. root memcg 21694.8 Mbps
2. 6.0-rc1 10482.7 Mbps (-51.6%)
3. 6.0-rc1 + (A) 14542.5 Mbps (-32.9%)
4. 6.0-rc1 + (B) 12413.7 Mbps (-42.7%)
5. 6.0-rc1 + (C) 17063.7 Mbps (-21.3%)
6. 6.0-rc1 + (A+B+C) 20120.3 Mbps (-7.2%)
With all three optimizations, the memcg overhead of this workload has
been reduced from 51.6% to just 7.2%.
[1] https://lore.kernel.org/linux-mm/
20220619150456.GB34471@xsang-OptiPlex-9020/
This patch (of 3):
For cgroups using low or min protections, the function
propagate_protected_usage() was doing an atomic xchg() operation
irrespectively. We can optimize out this atomic operation for one
specific scenario where the workload is using the protection (i.e. min >
0) and the usage is above the protection (i.e. usage > min).
This scenario is actually very common where the users want a part of their
workload to be protected against the external reclaim. Though this
optimization does introduce a race when the usage is around the protection
and concurrent charges and uncharged trip it over or under the protection.
In such cases, we might see lower effective protection but the subsequent
charge/uncharge will correct it.
To evaluate the impact of this optimization, on a 72 CPUs machine, we ran
the following workload in a three level of cgroup hierarchy with top level
having min and low setup appropriately to see if this optimization is
effective for the mentioned case.
$ netserver -6
# 36 instances of netperf with following params
$ netperf -6 -H ::1 -l 60 -t TCP_SENDFILE -- -m 10K
Results (average throughput of netperf):
Without (6.0-rc1) 10482.7 Mbps
With patch 14542.5 Mbps (38.7% improvement)
With the patch, the throughput improved by 38.7%
Link: https://lkml.kernel.org/r/20220825000506.239406-1-shakeelb@google.com
Link: https://lkml.kernel.org/r/20220825000506.239406-2-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oliver Sang <oliver.sang@intel.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Heidelberg [Tue, 23 Aug 2022 15:20:33 +0000 (17:20 +0200)]
mm: remove EXPERIMENTAL flag for zswap
zswap has been with us since 2013, and it's widely used in many products.
Link: https://lkml.kernel.org/r/20220823152033.66682-1-david@ixit.cz
Signed-off-by: David Heidelberg <david@ixit.cz>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Barry Song <song.bao.hua@hisilicon.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sergey Senozhatsky [Wed, 24 Aug 2022 03:51:00 +0000 (12:51 +0900)]
drivers/block/zram/zram_drv.c: do not keep dangling zcomp pointer after zram reset
We do all reset operations under write lock, so we don't need to save
->disksize and ->comp to stack variables. Another thing is that ->comp is
freed during zram reset, but comp pointer is not NULL-ed, so zram keeps
the freed pointer value.
Link: https://lkml.kernel.org/r/20220824035100.971816-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / platform / kernel / linux-starfive.git / log