Linus Torvalds [Tue, 3 Jun 2014 18:20:32 +0000 (11:20 -0700)]
Merge tag 'pinctrl-v3.16-1' of git://git./linux/kernel/git/linusw/linux-pinctrl into next
Pull pin control changes from Linus Walleij:
"This is the bulk of pin control changes for the v3.16 development
cycle:
- Antoine Tenart made the get_group_pins() vtable entry optional.
- Antoine also provides an entirely new driver for the Marvell Berlin
SoC. This is unrelated to the existing MVEBU hardware driver and
warrants its own separate driver.
- reflected from the GPIO subsystem there is a number of refactorings
to make pin control drivers with gpiochips use the new gpiolib
irqchip helpers. The following drivers were converted to use the
new infrastructure:
* ST Microelectronics STiH416 and friends
* The Atmel AT91
* The CSR SiRF (Prima2)
* The Qualcomm MSM series
- massive improvements in the Qualcomm MSM driver from Bjorn
Andersson, Andy Gross and Kumar Gala. Among those new support for
the IPQ8064 and MSM8x74 SoC variants.
- support for the Freescale i.MX6 SoloX SoC variant.
- massive improvements in the Allwinner sunxi driver from Boris
Brezillon, Maxime Ripard and Chen-Yu Tsai.
- Renesas PFC updates from Laurent Pinchart, Kuninori Morimoto,
Wolfram Sang and Magnus Damm.
- Cleanups and refactorings of the nVidia Tegra driver from Stepgen
Warren.
- the Exynos driver now supports the Exynos3250 SoC.
- Intel BayTrail updates from Jin Yao, Mika Westerberg.
- the MVEBU driver now supports the Orion5x SoC variants, which is
part of the effort of getting rid of the old Marvell kludges in
arch/arm/mach-orion5x
- Rockchip driver updates from Heiko Stuebner.
- a ton of cleanups and janitorial patches from Axel Lin.
- some minor fixes and improvements here and there"
* tag 'pinctrl-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (93 commits)
pinctrl: sirf: fix a bad conflict resolution
pinctrl: msm: Add more MSM8X74 pin definitions
pinctrl: qcom: ipq8064: Fix naming convention
pinctrl: msm: Add missing sdc1 and sdc3 groups
pinctrl: sirf: switch to using allocated state container
pinctrl: Enable "power-source" to be extracted from DT files
pinctrl: sunxi: create irq/pin mapping during init
pinctrl: pinconf-generic: Use kmemdup instead of kmalloc + memcpy
pinctrl: berlin: Use devm_ioremap_resource()
pinctrl: sirf: fix typo for GPIO bank number
pinctrl: sunxi: depend on RESET_CONTROLLER
pinctrl: sunxi: fix pin numbers passed to register offset helpers
pinctrl: add pinctrl driver for imx6sx
pinctrl/at91: Fix lockup when IRQ on PIOC and PIOD occurs
pinctrl: msm: switch to using generic GPIO irqchip helpers
pinctrl: sunxi: Fix multiple registration issue
pinctrl: sunxi: Fix recursive dependency
pinctrl: berlin: add the BG2CD pinctrl driver
pinctrl: berlin: add the BG2 pinctrl driver
pinctrl: berlin: add the BG2Q pinctrl driver
...
Linus Torvalds [Tue, 3 Jun 2014 18:09:43 +0000 (11:09 -0700)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging into next
Pull hwmon updates from Guenter Roeck:
"New driver for NCT6683D
New chip support to existing drivers:
- add support for STTS2004 and AT30TSE004 to jc42 driver
- add support for EMC1402/EMC1412/EMC1422 to emc1403 driver
Other notable changes:
- document hwmon kernel API
- convert jc42, lm70, lm75, lm77, lm83, lm92, max1619, tmp421, and
tmp102 drivers to use new hwmon API functions
- replace function macros in lm80, lm92, and jc42 drivers with real
code
- convert emc1403 driver to use regmap, add support for additional
attributes, and add device IDs for EMC1412, EMC1413, and EMC1414
- various additional cleanup and minor bug fixes in several drivers"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (60 commits)
hwmon: (nct6775) Fix probe unwind paths to properly unregister platform devices
hwmon: (nct6683) Fix probe unwind paths to properly unregister platform devices
hwmon: (ultra45_env) Introduce managed version of kzalloc
hwmon: Driver for NCT6683D
hwmon: (lm80) Rearrange code to avoid forward declarations
hwmon: (lm80) Convert fan display function macros into functions
hwmon: (lm80) Convert voltage display function macros into functions
hwmon: (lm80) Convert temperature display function macros into functions
hwmon: (lm80) Normalize all temperature values to 16 bit
hwmon: (lm80) Simplify TEMP_FROM_REG
hwmon: (lm83) Convert to use devm_hwmon_device_register_with_groups
hwmon: (lm83) Rearange code to avoid forward declarations
hwmon: (lm83) Drop FSF address
hwmon: (max1619) Convert to use devm_hwmon_device_register_with_groups
hwmon: (max1619) Drop function macros
hwmon: (max1619) Rearrange code to avoid forward declarations
hwmon: (max1619) Drop FSF address
hwmon: (max1619) Fix critical alarm display
hwmon: (jc42) Add support for STTS2004 and AT30TSE004
hwmon: (jc42) Convert function macros into functions
...
Linus Torvalds [Tue, 3 Jun 2014 17:26:41 +0000 (10:26 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux into next
Pull first set of s390 updates from Martin Schwidefsky:
"The biggest change in this patchset is conversion from the bootmem
bitmaps to the memblock code. This conversion requires two common
code patches to introduce the 'physmem' memblock list.
We experimented with ticket spinlocks but in the end decided against
them as they perform poorly on virtualized systems. But the spinlock
cleanup and some small improvements are included.
The uaccess code got another optimization, the get_user/put_user calls
are now inline again for kernel compiles targeted at z10 or newer
machines. This makes the text segment shorter and the code gets a
little bit faster.
And as always some bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (31 commits)
s390/lowcore: replace lowcore irb array with a per-cpu variable
s390/lowcore: reserve 96 bytes for IRB in lowcore
s390/facilities: remove extract-cpu-time facility check
s390: require mvcos facility for z10 and newer machines
s390/boot: fix boot of compressed kernel built with gcc 4.9
s390/cio: remove weird assignment during argument evaluation
s390/time: cast tv_nsec to u64 prior to shift in update_vsyscall
s390/oprofile: make return of 0 explicit
s390/spinlock: refactor arch_spin_lock_wait[_flags]
s390/rwlock: add missing local_irq_restore calls
s390/spinlock,rwlock: always to a load-and-test first
s390/cio: fix multiple structure definitions
s390/spinlock: fix system hang with spin_retry <= 0
s390/appldata: add slab.h for kzalloc/kfree
s390/uaccess: provide inline variants of get_user/put_user
s390/pci: add some new arch specific pci attributes
s390/pci: use pdev->dev.groups for attribute creation
s390/pci: use macro for attribute creation
s390/pci: improve state check when processing hotplug events
s390: split TIF bits into CIF, PIF and TIF bits
...
Linus Torvalds [Tue, 3 Jun 2014 16:11:20 +0000 (09:11 -0700)]
Merge tag 'usb-3.16-rc1' of git://git./linux/kernel/git/gregkh/usb into next
Pull USB driver updates from Greg KH:
"Here is the big USB driver pull request for 3.16-rc1.
Nothing huge here, but lots of little things in the USB core, and in
lots of drivers. Hopefully the USB power management will be work
better now that it has been reworked to do per-port power control
dynamically. There's also a raft of gadget driver updates and fixes,
CONFIG_USB_DEBUG is finally gone now that everything has been
converted over to the dynamic debug inteface, the last hold-out
drivers were cleaned up and the config option removed. There were
also other minor things all through the drivers/usb/ tree, the
shortlog shows this pretty well.
All have been in linux-next, including the very last patch, which came
from linux-next to fix a build issue on some platforms"
* tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (314 commits)
usb: hub_handle_remote_wakeup() only exists for CONFIG_PM=y
USB: orinoco_usb: remove CONFIG_USB_DEBUG support
USB: media: lirc: igorplugusb: remove CONFIG_USB_DEBUG support
USB: media: streamzap: remove CONFIG_USB_DEBUG
USB: media: redrat3: remove CONFIG_USB_DEBUG usage
USB: media: redrat3: remove unneeded tracing macro
usb: qcserial: add additional Sierra Wireless QMI devices
usb: host: max3421-hcd: Use module_spi_driver
usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity
usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning
usb: host: max3421-hcd: Fix missing unlock in max3421_urb_enqueue()
usb: qcserial: add Netgear AirCard 341U
Documentation: dt-bindings: update xhci-platform DT binding for R-Car H2 and M2
usb: host: xhci-plat: add xhci_plat_start()
usb: host: max3421-hcd: Fix potential NULL urb dereference
Revert "usb: gadget: net2280: Add support for PLX USB338X"
USB: usbip: remove CONFIG_USB_DEBUG reference
USB: remove CONFIG_USB_DEBUG from defconfig files
usb: resume child device when port is powered on
usb: hub_handle_remote_wakeup() depends on CONFIG_PM_RUNTIME=y
...
Linus Torvalds [Tue, 3 Jun 2014 16:01:02 +0000 (09:01 -0700)]
Merge tag 'tty-3.16-rc1' of git://git./linux/kernel/git/gregkh/tty into next
Pull tty/serial driver updates from Greg KH:
"Here is the big tty / serial driver pull request for 3.16-rc1.
A variety of different serial driver fixes and updates and additions,
nothing huge, and no real major core tty changes at all.
All have been in linux-next for a while"
* tag 'tty-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (84 commits)
Revert "serial: imx: remove the DMA wait queue"
serial: kgdb_nmi: Improve console integration with KDB I/O
serial: kgdb_nmi: Switch from tasklets to real timers
serial: kgdb_nmi: Use container_of() to locate private data
serial: cpm_uart: No LF conversion in put_poll_char()
serial: sirf: Fix compilation failure
console: Remove superfluous readonly check
console: Use explicit pointer type for vc_uni_pagedir* fields
vgacon: Fix & cleanup refcounting
ARM: tty: Move HVC DCC assembly to arch/arm
tty/hvc/hvc_console: Fix wakeup of HVC thread on hvc_kick()
drivers/tty/n_hdlc.c: replace kmalloc/memset by kzalloc
vt: emulate 8- and 24-bit colour codes.
printk/of_serial: fix serial console cessation part way through boot.
serial: 8250_dma: check the result of TX buffer mapping
serial: uart: add hw flow control support configuration
tty/serial: at91: add interrupts for modem control lines
tty/serial: at91: use mctrl_gpio helpers
tty/serial: Add GPIOLIB helpers for controlling modem lines
ARM: at91: gpio: implement get_direction
...
Linus Torvalds [Tue, 3 Jun 2014 15:34:00 +0000 (08:34 -0700)]
Merge tag 'staging-3.16-rc1' of git://git./linux/kernel/git/gregkh/staging into next
Pull staging driver updates from Greg KH:
"Here is the big staging driver pull request for 3.16-rc1.
Lots of stuff here, tons of cleanup patches, a few new drivers, and
some removed as well, but I think we are still adding a few thousand
more lines than we remove, due to the new drivers being bigger than
the ones deleted.
One notible bit of work did stand out, Jes Sorensen has gone on a
tear, fixing up a wireless driver to be "more sane" than it originally
was from the vendor, with over 500 patches merged here. Good stuff,
and a number of users laptops are better off for it.
All of this has been in linux-next for a while"
* tag 'staging-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1703 commits)
staging: skein: fix sparse warning for static declarations
staging/mt29f_spinand: coding style fixes
staging: silicom: fix sparse warning for static variable
staging: lustre: Fix coding style
staging: android: binder.c: Use more appropriate functions for euid retrieval
staging: lustre: fix integer as NULL pointer warnings
Revert "staging: dgap: remove unneeded kfree() in dgap_tty_register_ports()"
Staging: rtl8192u: r8192U_wx.c Fixed a misplaced brace
staging: ion: shrink highmem pages on kswapd
staging: ion: use compound pages on high order pages for system heap
staging: ion: remove struct ion_page_pool_item
staging: ion: simplify ion_page_pool_total()
staging: ion: tidy up a bit
staging: rtl8723au: Remove redundant casting in usb_ops_linux.c
staging: rtl8723au: Remove redundant casting in rtl8723a_hal_init.c
staging: rtl8723au: Remove redundant casting in rtw_xmit.c
staging: rtl8723au: Remove redundant casting in rtw_wlan_util.c
staging: rtl8723au: Remove redundant casting in rtw_sta_mgt.c
staging: rtl8723au: Remove redundant casting in rtw_recv.c
staging: rtl8723au: Remove redundant casting in rtw_mlme.c
...
Linus Torvalds [Tue, 3 Jun 2014 15:07:41 +0000 (08:07 -0700)]
Merge tag 'driver-core-3.16-rc1' of git://git./linux/kernel/git/gregkh/driver-core into next
Pull driver core / kernfs changes from Greg KH:
"Here is the "big" pull request for 3.16-rc1.
Not a lot of changes here, some kernfs work, a revert of a very old
driver core change that ended up cauing some memory leaks on driver
probe error paths, and other minor things.
As was pointed out earlier today, one commit here,
26fc9cd200ec
("kernfs: move the last knowledge of sysfs out from kernfs") is also
needed in your 3.15-final branch as well. If you could cherry-pick it
there, it would be most appreciated by Andy Lutomirski to prevent a
regression there.
All of these have been in linux-next for a while"
* tag 'driver-core-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
crypto/nx/nx-842: dev_set_drvdata can no longer fail
kernfs: move the last knowledge of sysfs out from kernfs
sysfs: fix attribute_group bin file path on removal
sysfs.h: don't return a void-valued expression in sysfs_remove_file
init.h: Update initcall_sync variants to fix build errors
driver core: Inline dev_set/get_drvdata
driver core: dev_get_drvdata: Don't check for NULL dev
driver core: dev_set_drvdata returns void
driver core: dev_set_drvdata can no longer fail
driver core: Move driver_data back to struct device
lib/devres.c: fix checkpatch warnings
lib/devres.c: use dev in devm_request_and_ioremap
kobject: Make support for uevent_helper optional.
kernfs: make kernfs_notify() trigger inotify events too
kernfs: implement kernfs_root->supers list
Linus Torvalds [Tue, 3 Jun 2014 15:06:56 +0000 (08:06 -0700)]
Merge tag 'char-misc-3.16-rc1' of git://git./linux/kernel/git/gregkh/char-misc into next
Pull char/misc driver patches from Greg KH:
"Here is the big char / misc driver update for 3.16-rc1.
Lots of different driver updates for a variety of different drivers
and minor driver subsystems.
All have been in linux-next with no reported issues"
* tag 'char-misc-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (79 commits)
hv: use correct order when freeing monitor_pages
spmi: of: fixup generic SPMI devicetree binding example
applicom: dereferencing NULL on error path
misc: genwqe: fix uninitialized return value in genwqe_free_sync_sgl()
miscdevice.h: Simple syntax fix to make pointers consistent.
MAINTAINERS: Add miscdevice.h to file list for char/misc drivers.
mcb: Add support for shared PCI IRQs
drivers: Remove duplicate conditionally included subdirs
misc: atmel_pwm: only build for supported platforms
mei: me: move probe quirk to cfg structure
mei: add per device configuration
mei: me: read H_CSR after asserting reset
mei: me: drop harmful wait optimization
mei: me: fix hw ready reset flow
mei: fix memory leak of mei_clients array
uio: fix vma io range check in mmap
drivers: uio_dmem_genirq: Fix memory leak in uio_dmem_genirq_probe()
w1: do not unlock unheld list_mutex in __w1_remove_master_device()
w1: optional bundling of netlink kernel replies
connector: allow multiple messages to be sent in one packet
...
Linus Torvalds [Tue, 3 Jun 2014 03:00:54 +0000 (20:00 -0700)]
Merge branch 'for-next' of git://git./linux/kernel/git/gerg/m68knommu into next
Pull m68knommu updates from Greg Ungerer:
"Nothing too big, just a handfull of small changes.
A couple of dragonball fixes, coldfire qspi cleanup and fixes, and
some coldfire gpio cleanup, fixes and extensions"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: Implement gpio support for m54xx.
m68knommu: Make everything thats not exported, static.
m68knommu: setting the gpio data direction register to output doesn't dependent upon the value to output!
m68knommu: add to_irq function so we can map gpios to external interrupts.
m68knommu: qspi declutter.
m68knommu: Fix the 5249/525x qspi base address.
m68knommu: Add qspi clk for Coldfire SoCs without real clks.
m68k: fix a compiler warning when building for DragonBall
m68knommu: Fix mach_sched_init for EZ and VZ DragonBall chips
Linus Torvalds [Mon, 2 Jun 2014 23:35:49 +0000 (16:35 -0700)]
Merge tag 'drivers-for-3.16' of git://git./linux/kernel/git/arm/arm-soc into next
Pull ARM SoC driver changes from Olof Johansson:
"SoC-near driver changes that we're merging through our tree. Mostly
because they depend on other changes we have staged, but in some cases
because the driver maintainers preferred that we did it this way.
This contains a largeish cleanup series of the omap_l3_noc bus driver,
cpuidle rework for Exynos, some reset driver conversions and a long
branch of TI EDMA fixes and cleanups, with more to come next release.
The TI EDMA cleanups is a shared branch with the dmaengine tree, with
a handful of Davinci-specific fixes on top.
After discussion at last year's KS (and some more on the mailing
lists), we are here adding a drivers/soc directory. The purpose of
this is to keep per-vendor shared code that's needed by different
drivers but that doesn't fit into the MFD (nor drivers/platform)
model. We expect to keep merging contents for this hierarchy through
arm-soc so we can keep an eye on what the vendors keep adding here and
not making it a free-for-all to shove in crazy stuff"
* tag 'drivers-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
cpufreq: exynos: Fix driver compilation with ARCH_MULTIPLATFORM
tty: serial: msm: Remove direct access to GSBI
power: reset: keystone-reset: introduce keystone reset driver
Documentation: dt: add bindings for keystone pll control controller
Documentation: dt: add bindings for keystone reset driver
soc: qcom: fix of_device_id table
ARM: EXYNOS: Fix kernel panic when unplugging CPU1 on exynos
ARM: EXYNOS: Move the driver to drivers/cpuidle directory
ARM: EXYNOS: Cleanup all unneeded headers from cpuidle.c
ARM: EXYNOS: Pass the AFTR callback to the platform_data
ARM: EXYNOS: Move S5P_CHECK_SLEEP into pm.c
ARM: EXYNOS: Move the power sequence call in the cpu_pm notifier
ARM: EXYNOS: Move the AFTR state function into pm.c
ARM: EXYNOS: Encapsulate the AFTR code into a function
ARM: EXYNOS: Disable cpuidle for exynos5440
ARM: EXYNOS: Encapsulate boot vector code into a function for cpuidle
ARM: EXYNOS: Pass wakeup mask parameter to function for cpuidle
ARM: EXYNOS: Remove ifdef for scu_enable in pm
ARM: EXYNOS: Move scu_enable in the cpu_pm notifier
ARM: EXYNOS: Use the cpu_pm notifier for pm
...
Linus Torvalds [Mon, 2 Jun 2014 23:34:00 +0000 (16:34 -0700)]
Merge tag 'dt-for-3.16' of git://git./linux/kernel/git/arm/arm-soc into next
Pull ARM SoC devicetree updates from Olof Johansson:
"As with previous release, this continues to be among the largest
branches we merge, with lots of new contents.
New things for this release are among other things:
- DTSI contents for the new SoCs supported in 3.16 (see SoC pull request)
- Qualcomm APQ8064 and APQ8084 SoCs and eval boards
- Nvidia Jetson TK1 development board (Tegra T124-based)
Two new SoCs that didn't need enough new platform code to stand out
enough for me to notice when writing the SoC tag, but that adds new DT
contents are:
- TI DRA72
- Marvell Berlin 2Q"
* tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (500 commits)
ARM: dts: add secure firmware support for exynos5420-arndale-octa
ARM: dts: add pmu sysreg node to exynos3250
ARM: dts: correct the usb phy node in exynos5800-peach-pi
ARM: dts: correct the usb phy node in exynos5420-peach-pit
ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410
ARM: dts: add dts files for exynos3250 SoC
ARM: dts: add mfc node for exynos5800
ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi
ARM: dts: enable fimd for exynos5800-peach-pi
ARM: dts: enable display controller for exynos5800-peach-pi
ARM: dts: enable hdmi for exynos5800-peach-pi
ARM: dts: add dts file for exynos5800-peach-pi board
ARM: dts: add dts file for exynos5800 SoC
ARM: dts: add dts file for exynos5260-xyref5260 board
ARM: dts: add dts files for exynos5260 SoC
ARM: dts: update watchdog node name in exynos5440
ARM: dts: use key code macros on Origen and Arndale boards
ARM: dts: enable RTC and WDT nodes on Origen boards
ARM: dts: qcom: Add APQ8084-MTP board support
ARM: dts: qcom: Add APQ8084 SoC support
...
Linus Torvalds [Mon, 2 Jun 2014 23:23:28 +0000 (16:23 -0700)]
Merge tag 'defconfig-for-3.16' of git://git./linux/kernel/git/arm/arm-soc into next
Pull ARM SoC defconfig updates from Olof Johansson:
"A number of defconfig updates for 3.16. We have quite a few of these
as new SoCs and drivers get supported, and we've started collecting
them in one shared branch.
We started halfway through the merge window so there'll be some small
conflicts with other branches on nearby changes, but nothing major.
Next cycle should be smoother"
* tag 'defconfig-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: multi_v7_defconfig: Enable Exynos platform
ARM: configs: update Allwinner options
ARM: qcom: Enable GSBI driver in defconfig
ARM: multi_v7_defconfig: Enable Zynq peripheral drivers
ARM: at91/defconfig: sama5_defconfig: updated
ARM: add drivers for Colibri T30 to multi_v7_defconfig
ARM: configs: add CONFIG_MMC_SDHCI_PXAV3 to the multi_v7_defconfig
ARM: configs: enable XHCI mvebu support in multi_v7_defconfig
ARM: multi_v7: Add Allwinner reset drivers to multi_v7_defconfig
ARM: sunxi: Add A31 reset driver to sunxi_defconfig
ARM: config: Update msm_defconfig
ARM: mvebu: enable MSI support in mvebu_v7_defconfig
ARM: config: Add qcom_defconfig
ARM: configs: enable XHCI mvebu support in mvebu_v7_defconfig
Linus Torvalds [Mon, 2 Jun 2014 23:21:41 +0000 (16:21 -0700)]
Merge tag 'boards-for-3.16' of git://git./linux/kernel/git/arm/arm-soc into next
Pull ARM SoC board support updates from Olof Johansson:
"The bulk of this branch is updates for Renesas Shmobile. They are
still doing some enablement for classic boards first, and then come up
with DT bindings when they've had a chance to learn more about the
hardware. Not necessarily a bad way to go about it, and they're
looking at moving some of the temporary board code resulting from it
to drivers/staging instead to avoid the churn here.
As a result of the shmobile clock cleanups, we end up merging quite a
bit of SH code here as well. We ended up merging it here instead of
in the cleanup branch due to the other board changes depending on it"
* tag 'boards-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (130 commits)
ARM: davinci: remove checks for CONFIG_USB_MUSB_PERIPHERAL
ARM: add drivers for Colibri T30 to multi_v7_defconfig
ARM: shmobile: Remove Genmai reference DTS
ARM: shmobile: Let Genmai multiplatform boot with Genmai DTB
ARM: shmobile: Sync Genmai DTS with Genmai reference DTS
ARM: shmobile: genmai-reference: Remove legacy clock support
ARM: shmobile: Remove non-multiplatform Genmai reference support
ARM: configs: enable XHCI mvebu support in multi_v7_defconfig
ARM: OMAP: replace checks for CONFIG_USB_GADGET_OMAP
ARM: OMAP: AM3517EVM: remove check for CONFIG_PANEL_SHARP_LQ043T1DG01
ARM: OMAP: SX1: remove check for CONFIG_SX1_OLD_FLASH
ARM: OMAP: remove some dead code
ARM: OMAP: omap3stalker: remove two Kconfig macros
ARM: tegra: tegra_defconfig updates
ARM: shmobile: r7s72100: use workaround for non DT-clocks
ARM: shmobile: Add forward declaration of struct clk to silence warning
ARM: shmobile: r7s72100: remove SPI DT clocks from legacy clock support
ARM: shmobile: r7s72100: add spi clocks to dtsi
ARM: shmobile: r7s72100: remove I2C DT clocks from legacy clock support
ARM: shmobile: r7s72100: add i2c clocks to dtsi
...
Linus Torvalds [Mon, 2 Jun 2014 23:15:12 +0000 (16:15 -0700)]
Merge tag 'soc-for-3.16' of git://git./linux/kernel/git/arm/arm-soc into next
Pull part one of ARM SoC updates from Olof Johansson:
"A quite large set of SoC updates this cycle. In no particular order:
- Multi-cluster power management for Samsung Exynos, adding support
for big.LITTLE CPU switching on EXYNOS5
- SMP support for Marvell Armada 375 and 38x
- SMP rework on Allwinner A31
- Xilinx Zynq support for SOC_BUS, big endian
- Marvell orion5x platform cleanup, modernizing the implementation
and moving to DT.
- _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
that their platform can be enabled in the same kernel binary as
most of the other v7 platforms in the tree. \o/
The work isn't quite complete, there's some driver fixes still
needed, but the basics now work.
New SoC support added:
- Freescale i.MX6SX
- LSI Axxia AXM55xx SoCs
- Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800
- STi STIH407
plus a large set of various smaller updates for different platforms.
I'm probably missing some important one here"
* tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits)
ARM: exynos: don't run exynos4 l2x0 setup on other platforms
ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug
ARM: EXYNOS: mcpm rename the power_down_finish
ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC
ARM: EXYNOS: Enable multi-platform build support
ARM: EXYNOS: Consolidate Kconfig entries
ARM: EXYNOS: Add support for EXYNOS5410 SoC
ARM: EXYNOS: Support secondary CPU boot of Exynos3250
ARM: EXYNOS: Add Exynos3250 SoC ID
ARM: EXYNOS: Add 5800 SoC support
ARM: EXYNOS: initial board support for exynos5260 SoC
clk: exynos5410: register clocks using common clock framework
ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084
ARM: sunxi: allow building without reset controller
Documentation: devicetree: arm: sort enable-method entries
ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE
clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
ARM: dts: axxia: Add reset controller
power: reset: Add Axxia system reset driver
ARM: axxia: Adding defconfig for AXM55xx
...
Linus Torvalds [Mon, 2 Jun 2014 23:14:07 +0000 (16:14 -0700)]
Merge tag 'cleanup-for-3.16' of git://git./linux/kernel/git/arm/arm-soc into next
Pull ARM SoC cleanups from Olof Johansson:
"Cleanups for 3.16. Among these are:
- a bunch of misc cleanups for Broadcom platforms, mostly
housekeeping
- enabling Common Clock Framework on the older s3c24xx Samsung
chipsets
- cleanup of the Versatile Express system controller code, moving it
to syscon
- power management cleanups for OMAP platforms
plus a handful of other cleanups across the place"
* tag 'cleanup-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits)
ARM: kconfig: allow PCI support to be selected with ARCH_MULTIPLATFORM
clk: samsung: fix build error
ARM: vexpress: refine dependencies for new code
clk: samsung: clk-s3c2410-dlck: do not use PNAME macro as it declares __initdata
cpufreq: exynos: Fix the compile error
ARM: S3C24XX: move debug-macro.S into the common space
ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro
ARM: S3C24XX: trim down debug uart handling
ARM: compressed/head.S: remove s3c24xx special case
ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
ARM: EXYNOS: Remove exynos_subsys registration
ARM: EXYNOS: Remove duplicate lines in Makefile
ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling
ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files
ARM: OMAP3/4: PRM: add support of late_init call to prm_ll_ops
ARM: OMAP3/OMAP4: PRM: add prm_features flags and add IO wakeup under it
ARM: OMAP3/4: PRM: provide io chain reconfig function through irq setup
ARM: OMAP2+: PRM: remove unnecessary cpu_is_XXX calls from prm_init / exit
ARM: OMAP2+: PRCM: cleanup some header includes
...
Linus Torvalds [Mon, 2 Jun 2014 23:13:34 +0000 (16:13 -0700)]
Merge tag 'fixes-for-3.16' of git://git./linux/kernel/git/arm/arm-soc into next
Pull ARM SoC low-priority fixes from Olof Johansson:
"A small selection of fixes coming in late during the release cycle and
not being critical enough for 3.15 inclusion"
* tag 'fixes-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: shmobile: armadillo800eva: fixup HDMI sound flags setting
ARM: msm: Silence readb/writeb warnings due to missing IOMEM()
ARM: dts: am43xx: fix starting offset of NAND.filesystem MTD partition
ARM: dts: am335x-boneblack: remove use of ti,vcc-aux-disable-is-sleep
ARM: OMAP2+: free use_gptimer_clksrc variable after boot
ARM: OMAP5: Redo THUMB mode switch on secondary CPU
ARM: dts: AM4372: add l3-noc information
ARM: dts: DRA7: Use dra7-l3-noc instead of omap4-l3-noc
reset: Add of_reset_control_get to reset.h
Stephen Rothwell [Thu, 29 May 2014 08:55:06 +0000 (18:55 +1000)]
usb: hub_handle_remote_wakeup() only exists for CONFIG_PM=y
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Mon, 2 Jun 2014 20:57:01 +0000 (13:57 -0700)]
Merge branch 'for-3.16/drivers' of git://git.kernel.dk/linux-block into next
Pull block driver changes from Jens Axboe:
"Now that the core bits are in, here's the pull request for the driver
related changes for 3.16. Nothing out of the ordinary here, mostly
business as usual. There are a few pulls of for-3.16/core into this
branch, which were done when the blk-mq was modified after the
mtip32xx conversion was put in.
The pull request contains:
- skd and cciss converted to use pci_enable_msix_exact(). From
Alexander Gordeev.
- A few mtip32xx fixes from Asai @ Micron.
- The conversion of mtip32xx from make_request_fn to blk-mq, and a
later small fix for that conversion on quiescing for non-queued IO.
From me.
- A fix for bsg to use an exported function to check whether this
driver is request based or not. Needed updating for blk-mq, which
is request based, but does not have a request_fn hook. From me.
- Small floppy bug fix from Jiri.
- A series of cleanups for the cdrom uniform layer from Joe Perches.
Gets rid of various old ugly macros, making the code conform more
to the modern coding style.
- A series of patches for drbd from the drbd crew (Lars Ellenberg and
Philipp Reisner).
- A use-after-free fix for null_blk from Ming Lei.
- Also from Ming Lei is a performance patch for virtio-blk, which can
net us a 3x win on kvm platforms where world notification is
expensive.
- Ming Lei also fixed a stall issue in virtio-blk, due to a race
between queue start/stop and resource limits.
- A small batch of fixes for xen-blk{back,front} from Olaf Hering and
Valentin Priescu"
* 'for-3.16/drivers' of git://git.kernel.dk/linux-block: (54 commits)
block: virtio_blk: don't hold spin lock during world switch
xen-blkback: defer freeing blkif to avoid blocking xenwatch
xen blkif.h: fix comment typo in discard-alignment
xen/blkback: disable discard feature if requested by toolstack
xen-blkfront: remove type check from blkfront_setup_discard
floppy: do not corrupt bio.bi_flags when reading block 0
mtip32xx: move error handling to service thread
virtio_blk: fix race between start and stop queue
mtip32xx: stop block hardware queues before quiescing IO
mtip32xx: blk_mq_init_queue() returns an ERR_PTR
mtip32xx: convert to use blk-mq
cdrom: Remove unnecessary prototype for cdrom_get_disc_info
cdrom: Remove unnecessary prototype for cdrom_mrw_exit
cdrom: Remove cdrom_count_tracks prototype
cdrom: Remove cdrom_get_next_writeable prototype
cdrom: Remove cdrom_get_last_written prototype
cdrom: Move mmc_ioctls above cdrom_ioctl to remove unnecessary prototype
cdrom: Remove unnecessary sanitize_format prototype
cdrom: Remove unnecessary check_for_audio_disc prototype
cdrom: Remove prototype for open_for_data
...
Linus Torvalds [Mon, 2 Jun 2014 19:15:19 +0000 (12:15 -0700)]
Merge tag 'pci-v3.16-changes' of git://git./linux/kernel/git/helgaas/pci into next
Pull PCI changes from Bjorn Helgaas:
"Enumeration
- Notify driver before and after device reset (Keith Busch)
- Use reset notification in NVMe (Keith Busch)
NUMA
- Warn if we have to guess host bridge node information (Myron Stowe)
- Work around AMD Fam15h BIOSes that fail to provide _PXM (Suravee
Suthikulpanit)
- Clean up and mark early_root_info_init() as deprecated (Suravee
Suthikulpanit)
Driver binding
- Add "driver_override" for force specific binding (Alex Williamson)
- Fail "new_id" addition for devices we already know about (Bandan
Das)
Resource management
- Support BAR sizes up to 8GB (Nikhil Rao, Alan Cox)
- Don't move IORESOURCE_PCI_FIXED resources (Bjorn Helgaas)
- Mark SBx00 HPET BAR as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
- Fail safely if we can't handle BARs larger than 4GB (Bjorn Helgaas)
- Reject BAR above 4GB if dma_addr_t is too small (Bjorn Helgaas)
- Don't convert BAR address to resource if dma_addr_t is too small
(Bjorn Helgaas)
- Don't set BAR to zero if dma_addr_t is too small (Bjorn Helgaas)
- Don't print anything while decoding is disabled (Bjorn Helgaas)
- Don't add disabled subtractive decode bus resources (Bjorn Helgaas)
- Add resource allocation comments (Bjorn Helgaas)
- Restrict 64-bit prefetchable bridge windows to 64-bit resources
(Yinghai Lu)
- Assign i82875p_edac PCI resources before adding device (Yinghai Lu)
PCI device hotplug
- Remove unnecessary "dev->bus" test (Bjorn Helgaas)
- Use PCI_EXP_SLTCAP_PSN define (Bjorn Helgaas)
- Fix rphahp endianess issues (Laurent Dufour)
- Acknowledge spurious "cmd completed" event (Rajat Jain)
- Allow hotplug service drivers to operate in polling mode (Rajat Jain)
- Fix cpqphp possible NULL dereference (Rickard Strandqvist)
MSI
- Replace pci_enable_msi_block() by pci_enable_msi_exact()
(Alexander Gordeev)
- Replace pci_enable_msix() by pci_enable_msix_exact() (Alexander Gordeev)
- Simplify populate_msi_sysfs() (Jan Beulich)
Virtualization
- Add Intel Patsburg (X79) root port ACS quirk (Alex Williamson)
- Mark RTL8110SC INTx masking as broken (Alex Williamson)
Generic host bridge driver
- Add generic PCI host controller driver (Will Deacon)
Freescale i.MX6
- Use new clock names (Lucas Stach)
- Drop old IRQ mapping (Lucas Stach)
- Remove optional (and unused) IRQs (Lucas Stach)
- Add support for MSI (Lucas Stach)
- Fix imx6_add_pcie_port() section mismatch warning (Sachin Kamat)
Renesas R-Car
- Add gen2 device tree support (Ben Dooks)
- Use new OF interrupt mapping when possible (Lucas Stach)
- Add PCIe driver (Phil Edworthy)
- Add PCIe MSI support (Phil Edworthy)
- Add PCIe device tree bindings (Phil Edworthy)
Samsung Exynos
- Remove unnecessary OOM messages (Jingoo Han)
- Fix add_pcie_port() section mismatch warning (Sachin Kamat)
Synopsys DesignWare
- Make MSI ISR shared IRQ aware (Lucas Stach)
Miscellaneous
- Check for broken config space aliasing (Alex Williamson)
- Update email address (Ben Hutchings)
- Fix Broadcom CNB20LE unintended sign extension (Bjorn Helgaas)
- Fix incorrect vgaarb conditional in WARN_ON() (Bjorn Helgaas)
- Remove unnecessary __ref annotations (Bjorn Helgaas)
- Add arch/x86/kernel/quirks.c to MAINTAINERS PCI file patterns
(Bjorn Helgaas)
- Fix use of uninitialized MPS value (Bjorn Helgaas)
- Tidy x86/gart messages (Bjorn Helgaas)
- Fix return value from pci_user_{read,write}_config_*() (Gavin Shan)
- Turn pcibios_penalize_isa_irq() into a weak function (Hanjun Guo)
- Remove unused serial device IDs (Jean Delvare)
- Use designated initialization in PCI_VDEVICE (Mark Rustad)
- Fix powerpc NULL dereference in pci_root_buses traversal (Mike Qiu)
- Configure MPS on ARM (Murali Karicheri)
- Remove unnecessary includes of <linux/init.h> (Paul Gortmaker)
- Move Open Firmware devspec attribute to PCI common code (Sebastian Ott)
- Use pdev->dev.groups for attribute creation on s390 (Sebastian Ott)
- Remove pcibios_add_platform_entries() (Sebastian Ott)
- Add new ID for Intel GPU "spurious interrupt" quirk (Thomas Jarosch)
- Rename pci_is_bridge() to pci_has_subordinate() (Yijing Wang)
- Add and use new pci_is_bridge() interface (Yijing Wang)
- Make pci_bus_add_device() void (Yijing Wang)
DMA API
- Clarify physical/bus address distinction in docs (Bjorn Helgaas)
- Fix typos in docs (Emilio López)
- Update dma_pool_create ()and dma_pool_alloc() descriptions (Gioh Kim)
- Change dma_declare_coherent_memory() CPU address to phys_addr_t
(Bjorn Helgaas)
- Pass GAPSPCI_DMA_BASE CPU & bus address to dma_declare_coherent_memory()
(Bjorn Helgaas)"
* tag 'pci-v3.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits)
MAINTAINERS: Add generic PCI host controller driver
PCI: generic: Add generic PCI host controller driver
PCI: imx6: Add support for MSI
PCI: designware: Make MSI ISR shared IRQ aware
PCI: imx6: Remove optional (and unused) IRQs
PCI: imx6: Drop old IRQ mapping
PCI: imx6: Use new clock names
i82875p_edac: Assign PCI resources before adding device
ARM/PCI: Call pcie_bus_configure_settings() to set MPS
PCI: imx6: Fix imx6_add_pcie_port() section mismatch warning
PCI: Make pci_bus_add_device() void
PCI: exynos: Fix add_pcie_port() section mismatch warning
PCI: Introduce new device binding path using pci_dev.driver_override
PCI: rcar: Add gen2 device tree support
PCI: cpqphp: Fix possible null pointer dereference
PCI: rcar: Add R-Car PCIe device tree bindings
PCI: rcar: Add MSI support for PCIe
PCI: rcar: Add Renesas R-Car PCIe driver
PCI: Fix return value from pci_user_{read,write}_config_*()
PCI: exynos: Remove unnecessary OOM messages
...
Linus Torvalds [Mon, 2 Jun 2014 16:29:34 +0000 (09:29 -0700)]
Merge branch 'for-3.16/core' of git://git.kernel.dk/linux-block into next
Pull block core updates from Jens Axboe:
"It's a big(ish) round this time, lots of development effort has gone
into blk-mq in the last 3 months. Generally we're heading to where
3.16 will be a feature complete and performant blk-mq. scsi-mq is
progressing nicely and will hopefully be in 3.17. A nvme port is in
progress, and the Micron pci-e flash driver, mtip32xx, is converted
and will be sent in with the driver pull request for 3.16.
This pull request contains:
- Lots of prep and support patches for scsi-mq have been integrated.
All from Christoph.
- API and code cleanups for blk-mq from Christoph.
- Lots of good corner case and error handling cleanup fixes for
blk-mq from Ming Lei.
- A flew of blk-mq updates from me:
* Provide strict mappings so that the driver can rely on the CPU
to queue mapping. This enables optimizations in the driver.
* Provided a bitmap tagging instead of percpu_ida, which never
really worked well for blk-mq. percpu_ida relies on the fact
that we have a lot more tags available than we really need, it
fails miserably for cases where we exhaust (or are close to
exhausting) the tag space.
* Provide sane support for shared tag maps, as utilized by scsi-mq
* Various fixes for IO timeouts.
* API cleanups, and lots of perf tweaks and optimizations.
- Remove 'buffer' from struct request. This is ancient code, from
when requests were always virtually mapped. Kill it, to reclaim
some space in struct request. From me.
- Remove 'magic' from blk_plug. Since we store these on the stack
and since we've never caught any actual bugs with this, lets just
get rid of it. From me.
- Only call part_in_flight() once for IO completion, as includes two
atomic reads. Hopefully we'll get a better implementation soon, as
the part IO stats are now one of the more expensive parts of doing
IO on blk-mq. From me.
- File migration of block code from {mm,fs}/ to block/. This
includes bio.c, bio-integrity.c, bounce.c, and ioprio.c. From me,
from a discussion on lkml.
That should describe the meat of the pull request. Also has various
little fixes and cleanups from Dave Jones, Shaohua Li, Duan Jiong,
Fengguang Wu, Fabian Frederick, Randy Dunlap, Robert Elliott, and Sam
Bradshaw"
* 'for-3.16/core' of git://git.kernel.dk/linux-block: (100 commits)
blk-mq: push IPI or local end_io decision to __blk_mq_complete_request()
blk-mq: remember to start timeout handler for direct queue
block: ensure that the timer is always added
blk-mq: blk_mq_unregister_hctx() can be static
blk-mq: make the sysfs mq/ layout reflect current mappings
blk-mq: blk_mq_tag_to_rq should handle flush request
block: remove dead code in scsi_ioctl:blk_verify_command
blk-mq: request initialization optimizations
block: add queue flag for disabling SG merging
block: remove 'magic' from struct blk_plug
blk-mq: remove alloc_hctx and free_hctx methods
blk-mq: add file comments and update copyright notices
blk-mq: remove blk_mq_alloc_request_pinned
blk-mq: do not use blk_mq_alloc_request_pinned in blk_mq_map_request
blk-mq: remove blk_mq_wait_for_tags
blk-mq: initialize request in __blk_mq_alloc_request
blk-mq: merge blk_mq_alloc_reserved_request into blk_mq_alloc_request
blk-mq: add helper to insert requests from irq context
blk-mq: remove stale comment for blk_mq_complete_request()
blk-mq: allow non-softirq completions
...
Linus Torvalds [Mon, 2 Jun 2014 16:22:24 +0000 (09:22 -0700)]
Merge tag 'mmc-v3.16-1' of git://git.linaro.org/people/ulf.hansson/mmc into next
Pull MMC update from Ulf Hansson:
"These patches are mainly updates for the mmci driver and have been
tested in linux-next.
Some ARM SoC related patches are also included and those have been
acked from the corresponding maintainers to go through my mmc tree.
Updates for mmci driver:
- Put the device into low power state at system suspend.
- Convert to the common mmc DT parser.
- Add missing DT bindings needed for ux500.
Updates for ARM ux500|u300:
- Convert to the common mmc DT bindings.
- Remove redundant board file for mmci platform data"
* tag 'mmc-v3.16-1' of git://git.linaro.org/people/ulf.hansson/mmc: (22 commits)
mmc: mmci: Enforce DMA configuration through DT
mmc: mmci: Enforce max frequency configuration through DT
mmc: mmci: Enforce mmc capabilities through DT
mmc: mmci: Enforce DT for signal direction and feedback clock
ARM: ux500: Remove redundant board file for mmci platform data
ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for href
ARM: ux500: Add the mmc capabilities flags to DT
mmc: mmci: Enable MMC_CAP_CMD23
mmc: mmci: Mark the DT bindings for highspeed mode as deprecated
ARM: u300: Convert to the common mmc DT bindings for highspeed mode
ARM: nomadik: Convert to the common mmc DT bindings for highspeed mode
ARM: ux500: Convert to the common mmc DT bindings for highspeed mode
ARM: ux500: Add mmci signal directions and feeback clock in DT for href
mmc: mmci: Use the common mmc DT parser
mmc: mmci: Add DT bindings for feedback clock pin
mmc: mmci: Add DT bindings for signal direction
mmc: mmci: Update DT documentation
mmc: mmci: Convert to devm functions
mmc: mmci: Convert to the mmc gpio API
mmc: mmci: Put the device into low power state at system suspend
...
Linus Torvalds [Mon, 2 Jun 2014 16:13:58 +0000 (09:13 -0700)]
Merge tag 'hsi-for-3.16' of git://git./linux/kernel/git/sre/linux-hsi into next
Pull HSI (High Speed Syncronous Interface) changes from Sebastian Reichel:
"Please pull the following changes for the HSI subsystem, which I have
taken over from Carlos Chinea <carlos.chinea@nokia.com>.
The below patches have been worked on in the linux-omap mailinglist
for 10 months and are well tested in linux-next (have been in there
for more than two weeks) without any problems arising. Apart from
that potential regressions are very limited, because the subsystem is
not yet used by any platform in the mainline kernel.
- Add some documentation for the HSI subsystem
- Add Device Tree support for the HSI subsystem
- Add OMAP3 SSI driver (SSI is a legacy variant of HSI)
- Add Nokia N900 Modem driver (without speech support for now)"
* tag 'hsi-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: Introduce Nokia N900 modem driver
HSI: Introduce driver for SSI Protocol
Documentation: DT: omap-ssi binding documentation
HSI: Introduce OMAP SSI driver
HSI: Add common DT binding for HSI client devices
HSI: export method to (un)register clients
HSI: Add channel resource support to HSI clients
HSI: method to unregister clients from an hsi port
HSI: hsi-char: fix driver for multiport scenarios
MAINTAINERS: update HSI entry
Documentation: HSI: Add some general description for the HSI subsystem
Linus Torvalds [Mon, 2 Jun 2014 15:59:46 +0000 (08:59 -0700)]
Merge tag 'edac_for_3.16' of git://git./linux/kernel/git/bp/bp into next
Pull EDAC changes from Borislav Petkov:
"Just two small fixlets.
We have more in the pipe but we didn't get ready in time so more stuff
next time"
* tag 'edac_for_3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC: Fix MC scrub mode comparsion bug for correctable errors
EDAC, MCE, AMD: Remove leftover unused mask
Linus Torvalds [Mon, 2 Jun 2014 15:46:03 +0000 (08:46 -0700)]
Merge tag 'gpio-v3.16-1' of git://git./linux/kernel/git/linusw/linux-gpio into next
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v3.16 series.
There is a lot of action in the GPIO subsystem doing refactorings and
cleanups, almost as many deletions as insertions and minor feature
growth and no new drivers this time. Which is actually pretty nice.
Some GPIO-related stuff will come in through the pin control tree as
well.
Details:
- We are finalizing and fixing up the gpiochip irqchip helpers
bringing a helpful irqchip implementation into the gpiolib core and
avoiding duplicate code and, more importantly, duplicate bug fixes:
* Support for using the helpers with threaded interrupt handlers as
used on sleeping GPIO-irqchips
* Do not set up hardware triggers for edges or levels if the
default IRQ type is IRQ_TYPE_NONE - some drivers would exploit
the fact that you could get default initialization of the IRQ
type from the core at probe() but if no default type is set up
from the helper, we should not call the driver to configure
anything. Wait until a consumer requests the interrupt instead.
* Make the irqchip helpers put the GPIO irqs into their own lock
class. The GPIO irqchips can often emit (harmless, but annoying)
lockdep warnings about recursions when they are in fact just
cascaded IRQs. By putting them into their own lock class we help
the lockdep core to keep track of things.
* Switch the tc3589x GPIO expanders to use the irqchip helpers
* Switch the OMAP GPIO driver to use the irqchip helpers
* Add some documentation for the irqchip helpers
* select IRQ_DOMAIN when using the helpers since some platforms may
not be using this by default and it's a strict dependency.
- Continued GPIO descriptor refactoring:
* Remove the one instance of gpio_to_desc() from the device tree
code, making the OF GPIO code use GPIO descriptors only.
* Introduce gpiod_get_optional() and gpiod_get_optional_index()
akin to the similar regulator functions for cases where the use
of GPIO is optional and not strictly required.
* Make of_get_named_gpiod_flags() private - we do not want to
unnecessarily expose APIs to drivers that make the gpiolib harder
than necessary to maintain and refactor. Privatize this
function.
- Support "-gpio" suffix for the OF GPIO retrieveal path. We used to
look for "foo-gpios" or just "gpios" in device tree nodes, but it
turns out that some drivers with a single GPIO line will just state
"foo-gpio" (singularis). Sigh. Support this with a fallback
looking for it, as this simplifies driver code and handles it in
core code.
- Switch the ACPI GPIO core to fetch GPIOs with the *_cansleep
function variants as the GPIO operation region handler can sleep,
and shall be able to handle gpiochips that sleep.
- Tons of cleanups and janitorial work from Jingoo Han, Axel Lin,
Javier Martinez Canillas and Abdoulaye Berthe. Notably Jingoo cut
off a ton of pointless OOM messages.
- Incremental development and fixes for various drivers, nothing
really special here"
* tag 'gpio-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (85 commits)
gpio: select IRQ_DOMAIN for gpiolib irqchip helpers
gpio: pca953x: use gpiolib irqchip helpers
gpio: pcf857x: Add IRQF_SHARED when request irq
gpio: pcf857x: Avoid calling irq_domain_cleanup twice
gpio: mcp23s08: switch chip count to int
gpio: dwapb: use a second irq chip
gpio: ep93xx: Use devm_ioremap_resource()
gpio: mcp23s08: fixed count variable for devicetree probing
gpio: Add run-time dependencies to R-Car driver
gpio: pch: add slab include
Documentation / ACPI: Fix location of GPIO documentation
gpio / ACPI: use *_cansleep version of gpiod_get/set APIs
gpio: generic: add request function pointer
gpio-pch: Fix Kconfig dependencies
gpio: make of_get_named_gpiod_flags() private
gpio: gpioep93xx: use devm functions
gpio: janzttl: use devm function
gpio: timberdale: use devm functions
gpio: bt8xx: use devm function for memory allocation
gpio: include linux/bug.h in interface header
...
Linus Torvalds [Mon, 2 Jun 2014 15:24:12 +0000 (08:24 -0700)]
Merge tag 'stable/for-linus-3.16-rc0-tag' of git://git./linux/kernel/git/xen/tip into next
Pull Xen updates from David Vrabel:
"xen: features and fixes for 3.16-rc0
- support foreign mappings in PVH domains (needed when dom0 is PVH)
- fix mapping high MMIO regions in x86 PV guests (this is also the
first half of removing the PAGE_IOMAP PTE flag).
- ARM suspend/resume support.
- ARM multicall support"
* tag 'stable/for-linus-3.16-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: map foreign pfns for autotranslated guests
xen-acpi-processor: Don't display errors when we get -ENOSYS
xen/pciback: Document the entry points for 'pcistub_put_pci_dev'
xen/pciback: Document when the 'unbind' and 'bind' functions are called.
xen-pciback: Document when we FLR an PCI device.
xen-pciback: First reset, then free.
xen-pciback: Cleanup up pcistub_put_pci_dev
x86/xen: do not use _PAGE_IOMAP in xen_remap_domain_mfn_range()
x86/xen: set regions above the end of RAM as 1:1
x86/xen: only warn once if bad MFNs are found during setup
x86/xen: compactly store large identity ranges in the p2m
x86/xen: fix set_phys_range_identity() if pfn_e > MAX_P2M_PFN
x86/xen: rename early_p2m_alloc() and early_p2m_alloc_middle()
xen/x86: set panic notifier priority to minimum
arm,arm64/xen: introduce HYPERVISOR_suspend()
xen: refactor suspend pre/post hooks
arm: xen: export HYPERVISOR_multicall to modules.
arm64: introduce virt_to_pfn
arm/xen: Remove definiition of virt_to_pfn in asm/xen/page.h
arm: xen: implement multicall hypercall support.
Linus Torvalds [Mon, 2 Jun 2014 15:03:34 +0000 (08:03 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/geert/linux-m68k into next
Pull m68k updates from Geert Uytterhoeven:
"Highlights:
- support for running kernels in fast TT-RAM instead of slow ST-RAM
on Atari
- multi-platform EARLY_PRINTK
- better support for machines with lots of RAM (think ARAnyM), and
for running kernels larger than 4 MiB (think multi-platform)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k/hp300: Convert printk to pr_foo()
m68k/apollo: Convert printk to pr_foo()
m68k/amiga: Convert printk(foo to pr_foo()
m68k: Increase initial mapping to 8 or 16 MiB if possible
m68k: Update defconfigs for v3.15-rc2
m68k/atari: fix SCC initialization for debug console
m68k/mvme16x: Adopt common boot console
m68k: Multi-platform EARLY_PRINTK
m68k: Toward platform agnostic framebuffer debug logging
m68k/atari - atari_scsi: use correct virt/phys translation for DMA buffer
m68k/atari - ataflop: use correct virt/phys translation for DMA buffer
m68k/atari - atafb: convert allocation of fb ram to new interface
m68k/atari - stram: alloc ST-RAM pool even if kernel not in ST-RAM
Ulf Hansson [Tue, 20 May 2014 04:45:54 +0000 (06:45 +0200)]
mmc: mmci: Enforce DMA configuration through DT
Remove the option to provide DMA configuration as platform data,
enforce it through DT.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Roland Stigge <stigge@antcom.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Linus Torvalds [Mon, 2 Jun 2014 02:12:24 +0000 (19:12 -0700)]
Linux 3.15-rc8
Linus Torvalds [Mon, 2 Jun 2014 01:30:07 +0000 (18:30 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
Pull powerpc fix from Ben Herrenschmidt:
"Here's just one trivial patch to wire up sys_renameat2 which I seem to
have completely missed so far.
(My test build scripts fwd me warnings but miss the ones generated for
missing syscalls)"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Wire renameat2() syscall
Linus Torvalds [Mon, 2 Jun 2014 01:28:58 +0000 (18:28 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"A fair number of fixes across the field. Nothing terribly
complicated; the one liners in below changelog should be fairly
descriptive.
Noteworthy is the SB1 change which the result of changes to binutils
resulting in one big gas warning for most files being assembled as
well as the asid_cache and branch emulation fixes which fix corruption
or possible uninteded behaviour of kernel or application code. The
remainder of fixes are more platforms or subsystem specific"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: R46000: Fix Micro-assembler field overflow for R4600 V2
MIPS: ptrace: Avoid smp_processor_id() in preemptible code
MIPS: Lemote 2F: cs5536: mfgpt: use raw locks
MIPS: SB1: Fix excessive kernel warnings.
MIPS: RC32434: fix broken PCI resource initialization
MIPS: malta: memory.c: Initialize the 'memsize' variable
MIPS: Fix typo when reporting cache and ftlb errors for ImgTec cores
MIPS: Fix inconsistancy of __NR_Linux_syscalls value
MIPS: Fix branch emulation of branch likely instructions.
MIPS: Fix a typo error in AUDIT_ARCH definition
MIPS: Change type of asid_cache to unsigned long
Linus Torvalds [Mon, 2 Jun 2014 01:26:59 +0000 (18:26 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Various fixlets, mostly related to the (root-only) SCHED_DEADLINE
policy, but also a hotplug bug fix and a fix for a NR_CPUS related
overallocation bug causing a suspend/resume regression"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix hotplug vs. set_cpus_allowed_ptr()
sched/cpupri: Replace NR_CPUS arrays
sched/deadline: Replace NR_CPUS arrays
sched/deadline: Restrict user params max value to 2^63 ns
sched/deadline: Change sched_getparam() behaviour vs SCHED_DEADLINE
sched: Disallow sched_attr::sched_policy < 0
sched: Make sched_setattr() correctly return -EFBIG
James A Shackleford [Sun, 1 Jun 2014 23:52:49 +0000 (19:52 -0400)]
staging: skein: fix sparse warning for static declarations
This patch fixes the following sparse warnings:
skein_block.c:43:6: warning: symbol 'skein_256_process_block' was not declared. Should it be static?
skein_block.c:252:6: warning: symbol 'skein_512_process_block' was not declared. Should it be static?
skein_block.c:483:6: warning: symbol 'skein_1024_process_block' was not declared. Should it be static?
by including the header skein_block.h, which contains the declarations in
question.
Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Boulay [Sun, 1 Jun 2014 14:57:44 +0000 (16:57 +0200)]
staging/mt29f_spinand: coding style fixes
This patch fixes coding style errors reported by checkpatch.pl.
It adds new lines after declarations in two places.
Signed-off-by: Simon Boulay <simon.boulay@alkeona.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James A Shackleford [Sun, 1 Jun 2014 23:34:28 +0000 (19:34 -0400)]
staging: silicom: fix sparse warning for static variable
This patch fixes the following sparse warning in bpctl_mod.c:
warning: symbol 'bpvm_lock' was not declared. Should it be static?
Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Herrenschmidt [Sun, 1 Jun 2014 23:24:27 +0000 (09:24 +1000)]
powerpc: Wire renameat2() syscall
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Josep Puigdemont [Sun, 1 Jun 2014 18:23:16 +0000 (20:23 +0200)]
staging: lustre: Fix coding style
The if block should be placed in a new line rather
than after the if statement.
Blank line required between variable declarations and code.
Signed-off-by: Josep Puigdemont <josep.puigdemont@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tair Rzayev [Sat, 31 May 2014 19:43:34 +0000 (22:43 +0300)]
staging: android: binder.c: Use more appropriate functions for euid retrieval
Instead of getting the reference to whole credential structure, use
task_euid() and current_euid() to get it.
Signed-off-by: Tair Rzayev <tair.rzayev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexandr Terekhov [Sat, 31 May 2014 15:20:39 +0000 (18:20 +0300)]
staging: lustre: fix integer as NULL pointer warnings
Fix several sparse warnings "Using plain integer as NULL pointer"
Signed-off-by: Alexandr Terekhov <a.terekhov@gmail.com>
drivers/staging/lustre/lustre/ldlm/ldlm_resource.c | 4 ++--
drivers/staging/lustre/lustre/obdclass/obd_mount.c | 4 ++--
drivers/staging/lustre/lustre/obdecho/lproc_echo.c | 4 ++--
drivers/staging/lustre/lustre/osc/osc_dev.c | 2 +-
drivers/staging/lustre/lustre/ptlrpc/import.c | 2 +-
5 files changed, 8 insertions(+), 8 deletions(-)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Olof Johansson [Sat, 31 May 2014 17:13:46 +0000 (10:13 -0700)]
ARM: exynos: don't run exynos4 l2x0 setup on other platforms
This was caught by a panic on Broadcom mobile platforms.
Note that this code is all going away with the pending l2x0 cleanup
series from Russell, but we need this here until that's landed so we
can enable exynos multiplatform.
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Sat, 31 May 2014 16:47:55 +0000 (09:47 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull core futex/rtmutex fixes from Thomas Gleixner:
"Three fixlets for long standing issues in the futex/rtmutex code
unearthed by Dave Jones syscall fuzzer:
- Add missing early deadlock detection checks in the futex code
- Prevent user space from attaching a futex to kernel threads
- Make the deadlock detector of rtmutex work again
Looks large, but is more comments than code change"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtmutex: Fix deadlock detector for real
futex: Prevent attaching to kernel threads
futex: Add another early deadlock detection check
Linus Torvalds [Sat, 31 May 2014 16:19:02 +0000 (09:19 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Mostly quiet now:
i915:
fixing userspace visiblie issues, all stable marked
radeon:
one more pll fix, two crashers, one suspend/resume regression"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: Resume fbcon last
drm/radeon: only allocate necessary size for vm bo list
drm/radeon: don't allow RADEON_GEM_DOMAIN_CPU for command submission
drm/radeon: avoid crash if VM command submission isn't available
drm/radeon: lower the ref * post PLL maximum once more
drm/i915: Prevent negative relocation deltas from wrapping
drm/i915: Only copy back the modified fields to userspace from execbuffer
drm/i915: Fix dynamic allocation of physical handles
Linus Torvalds [Sat, 31 May 2014 16:13:21 +0000 (09:13 -0700)]
dcache: add missing lockdep annotation
lock_parent() very much on purpose does nested locking of dentries, and
is careful to maintain the right order (lock parent first). But because
it didn't annotate the nested locking order, lockdep thought it might be
a deadlock on d_lock, and complained.
Add the proper annotation for the inner locking of the child dentry to
make lockdep happy.
Introduced by commit
046b961b45f9 ("shrink_dentry_list(): take parent's
->d_lock earlier").
Reported-and-tested-by: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Abhilash Kesavan [Mon, 26 May 2014 05:54:56 +0000 (11:24 +0530)]
ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug
This fixes the following build errors:
/tmp/ccRbZlaA.s: Assembler messages:
/tmp/ccRbZlaA.s:69: Error: selected processor does not support ARM mode `isb '
/tmp/ccRbZlaA.s:75: Error: selected processor does not support ARM mode `isb '
/tmp/ccRbZlaA.s:76: Error: selected processor does not support ARM mode `dsb '
make[1]: *** [arch/arm/mach-exynos/hotplug.o] Error 1
/tmp/ccJEg4jw.s: Assembler messages:
/tmp/ccJEg4jw.s:454: Error: selected processor does not support ARM mode `isb'
/tmp/ccJEg4jw.s:455: Error: selected processor does not support ARM mode `dsb'
/tmp/ccJEg4jw.s:465: Error: selected processor does not support ARM mode `isb'
/tmp/ccJEg4jw.s:474: Error: selected processor does not support ARM mode `isb'
/tmp/ccJEg4jw.s:475: Error: selected processor does not support ARM mode `dsb'
/tmp/ccJEg4jw.s:516: Error: selected processor does not support ARM mode `isb'
/tmp/ccJEg4jw.s:525: Error: selected processor does not support ARM mode `isb'
/tmp/ccJEg4jw.s:526: Error: selected processor does not support ARM mode `dsb'
make[1]: *** [arch/arm/mach-exynos/mcpm-exynos.o] Error 1
Reported-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Tested-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Sachin Kamat [Tue, 27 May 2014 15:14:10 +0000 (00:14 +0900)]
ARM: multi_v7_defconfig: Enable Exynos platform
Enable Exynos platform and its related IPs for multi_v7_defconfig.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 31 May 2014 04:48:39 +0000 (21:48 -0700)]
Merge tag 'samsung-drivers-2' of git://git./linux/kernel/git/kgene/linux-samsung into next/drivers
Merge "Samsung 2nd drivers for 3.16" from Kukjin Kim:
This is including fix exynos cpufreq driver compilation with
ARCH_MULTIPLATFORM. Even though this is a work around, this
is required for support exynos multiplatform for a while and
will be updated in near future.
This is based on tags/samsung-exynos.
* tag 'samsung-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (24 commits)
cpufreq: exynos: Fix driver compilation with ARCH_MULTIPLATFORM
ARM: EXYNOS: Enable multi-platform build support
ARM: EXYNOS: Consolidate Kconfig entries
ARM: EXYNOS: Add support for EXYNOS5410 SoC
ARM: EXYNOS: Support secondary CPU boot of Exynos3250
ARM: EXYNOS: Add Exynos3250 SoC ID
ARM: EXYNOS: Add 5800 SoC support
ARM: EXYNOS: initial board support for exynos5260 SoC
clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
cpufreq: exynos: Fix the compile error
ARM: S3C24XX: move debug-macro.S into the common space
ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro
ARM: S3C24XX: trim down debug uart handling
ARM: compressed/head.S: remove s3c24xx special case
ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
ARM: EXYNOS: Remove exynos_subsys registration
ARM: EXYNOS: Remove duplicate lines in Makefile
ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling
ARM: dts: Remove g2d_pd node for exynos5420
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 31 May 2014 04:45:47 +0000 (21:45 -0700)]
Merge tag 'exynos-mcpm-2' of git://git./linux/kernel/git/kgene/linux-samsung into next/soc
Merge "Exynos 2nd MCPM updates for v3.16" from Kukjin Kim:
- enable mcpm for dual-cluster exynos5800
- since commit
166aaf39 ("ARM: 8029/1: mcpm: Rename the
power_down_finish() functions to be less confusing"),
use new member name wait_for_cpu_powerdown.
This is based on tags/exynos-mcpm.
Note that since the commit
166aaf39 is in rmk tree so this
should be sent to upstream after that in 3.16 merge window.
* tag 'exynos-mcpm-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: mcpm rename the power_down_finish
ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 31 May 2014 04:44:32 +0000 (21:44 -0700)]
Merge tag 'samsung-exynos' of git://git./linux/kernel/git/kgene/linux-samsung into next/soc
Samsung Exynos updates for 3.16
- add new SoCs support
: exynos3250, 5260, 5410 and 5800
- enable multi-platform on exynos
: consolidate exynos related Kconfig entries
* tag 'samsung-exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (22 commits)
ARM: EXYNOS: Enable multi-platform build support
ARM: EXYNOS: Consolidate Kconfig entries
ARM: EXYNOS: Add support for EXYNOS5410 SoC
ARM: EXYNOS: Support secondary CPU boot of Exynos3250
ARM: EXYNOS: Add Exynos3250 SoC ID
ARM: EXYNOS: Add 5800 SoC support
ARM: EXYNOS: initial board support for exynos5260 SoC
cpufreq: exynos: Fix the compile error
ARM: S3C24XX: move debug-macro.S into the common space
ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro
ARM: S3C24XX: trim down debug uart handling
ARM: compressed/head.S: remove s3c24xx special case
ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
ARM: EXYNOS: Remove exynos_subsys registration
ARM: EXYNOS: Remove duplicate lines in Makefile
ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling
ARM: dts: Remove g2d_pd node for exynos5420
ARM: dts: Remove mau_pd node for exynos5420
ARM: exynos_defconfig: enable HS-I2C to fix for mmc partition mount
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 31 May 2014 04:21:10 +0000 (21:21 -0700)]
Merge tag 'samsung-dt-3' of git://git./linux/kernel/git/kgene/linux-samsung into next/dt
Merge "Samsung 3rd DT updates for v3.16" from Kukjin Kim:
- add dts files support for new SoCs
: exynos3250 SoC
: exynos5260 SoC and exynos5260-xyref5260 board
: exynos5410 SoC and exynos5410-smdk5410 board
: exynos5800 SoC and exynos5800-peach-pi board
- exynos4210-origen and exynos4412-origen
: enable RTC and WDT nodes
: use key code macros
- exynos5250-arndale
: use key code macros
- exynos5420-arndale-octa
: add secure firmware support
- exynos5440
: update watchdog node name
* tag 'samsung-dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: add secure firmware support for exynos5420-arndale-octa
ARM: dts: add pmu sysreg node to exynos3250
ARM: dts: correct the usb phy node in exynos5800-peach-pi
ARM: dts: correct the usb phy node in exynos5420-peach-pit
ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410
ARM: dts: add dts files for exynos3250 SoC
ARM: dts: add mfc node for exynos5800
ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi
ARM: dts: enable fimd for exynos5800-peach-pi
ARM: dts: enable display controller for exynos5800-peach-pi
ARM: dts: enable hdmi for exynos5800-peach-pi
ARM: dts: add dts file for exynos5800-peach-pi board
ARM: dts: add dts file for exynos5800 SoC
ARM: dts: add dts file for exynos5260-xyref5260 board
ARM: dts: add dts files for exynos5260 SoC
ARM: dts: update watchdog node name in exynos5440
ARM: dts: use key code macros on Origen and Arndale boards
ARM: dts: enable RTC and WDT nodes on Origen boards
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 31 May 2014 04:18:55 +0000 (21:18 -0700)]
Merge tag 'samsung-clk-3' of git://git./linux/kernel/git/kgene/linux-samsung into next/soc
Merge "Samsung 3rd clock updates for 3.16" from Kukjin Kim:
- add clock for new exynos5410 SoC
* tag 'samsung-clk-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
clk: exynos5410: register clocks using common clock framework
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 31 May 2014 03:55:45 +0000 (20:55 -0700)]
Merge tag 'qcom-drivers-for-3.16-2' of git://git./linux/kernel/git/galak/linux-qcom into next/drivers
Merge "Qualcomm ARM Based driver Updates for v3.16-2" from Kumar Gala:
* Updated MSM uart driver to not access GSBI control registers
* tag 'qcom-drivers-for-3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
tty: serial: msm: Remove direct access to GSBI
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 31 May 2014 03:34:23 +0000 (20:34 -0700)]
Merge tag 'qcom-soc-for-3.16-2' of git://git./linux/kernel/git/galak/linux-qcom into next/soc
Merge "Qualcomm ARM Based SoC Updates for v3.16-2" from Kumar Gala:
* Updated Kconfig DEBUG_QCOM_UARTDM help to include APQ8084 info
* tag 'qcom-soc-for-3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 31 May 2014 03:33:39 +0000 (20:33 -0700)]
Merge tag 'qcom-defconfig-for-3.16-2' of git://git./linux/kernel/git/galak/linux-qcom into next/defconfig
Merge "Qualcomm ARM Based defconfig Updates for v3.16-2" from Kumar Gala:
* Enable qcom GSBI driver
* tag 'qcom-defconfig-for-3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
ARM: qcom: Enable GSBI driver in defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 31 May 2014 03:32:48 +0000 (20:32 -0700)]
Merge tag 'qcom-dt-for-3.16-2' of git://git./linux/kernel/git/galak/linux-qcom into next/dt
Merge "Qualcomm ARM Based Device Tree Updates for v3.16-2" from Kumar Gala:
* Updated MSM8660/MSM8960/MSM8974 dts for various updates or conformitity
to binding specs
* Added APQ8064 SoC and IFC6410 board device tree support
* Added APQ8084 SoC and APQ8084-MTP board device tree support
* tag 'qcom-dt-for-3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
ARM: dts: qcom: Add APQ8084-MTP board support
ARM: dts: qcom: Add APQ8084 SoC support
ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees
ARM: dts: qcom: Update msm8660 device trees
ARM: dts: qcom: Update msm8960 device trees
ARM: dts: qcom: Update msm8974/apq8074 device trees
Signed-off-by: Olof Johansson <olof@lixom.net>
Jens Axboe [Sat, 31 May 2014 03:20:50 +0000 (21:20 -0600)]
blk-mq: push IPI or local end_io decision to __blk_mq_complete_request()
We have callers outside of the blk-mq proper (like timeouts) that
want to call __blk_mq_complete_request(), so rename the function
and put the decision code for whether to use ->softirq_done_fn
or blk_mq_endio() into __blk_mq_complete_request().
This also makes the interface more logical again.
blk_mq_complete_request() attempts to atomically mark the request
completed, and calls __blk_mq_complete_request() if successful.
__blk_mq_complete_request() then just ends the request.
Signed-off-by: Jens Axboe <axboe@fb.com>
Daniel Vetter [Fri, 30 May 2014 14:41:23 +0000 (16:41 +0200)]
drm/radeon: Resume fbcon last
So a few people complained that
commit
177cf92de4aa97ec1435987e91696ed8b5023130
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Apr 1 22:14:59 2014 +0200
drm/crtc-helpers: fix dpms on logic
which was merged into 3.15-rc1, broke resume on radeons. Strangely git
bisect lead everyone to
commit
25f397a429dfa43f22c278d0119a60a343aa568f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Jul 19 18:57:11 2013 +0200
drm/crtc-helper: explicit DPMS on after modeset
which was merged long ago and actually part of 3.14.
Digging deeper I've noticed (again) that the call to
drm_helper_resume_force_mode in the radeon resume handlers was a no-op
previously because everything gets shut down on suspend. radeon does
this with explicit calls to drm_helper_connector_dpms with DPMS_OFF.
But with 177c we now force the dpms state to ON, so suddenly
resume_force_mode actually forced the crtcs back on.
This is the intention of the change after all, the problem is that
radeon resumes the fbdev console layer _before_ restoring the display,
through calling fb_set_suspend. And fbcon does an immediate ->set_par,
which in turn causes the same forced mode restore to happen.
Two concurrent modeset operations didn't lead to happiness. Fix this
by delaying the fbcon resume until the end of the readeon resum
functions.
v2: Fix up a bit of the spelling fail.
References: https://lkml.org/lkml/2014/5/29/1043
References: https://lkml.org/lkml/2014/5/2/388
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=74751
Tested-by: Ken Moffat <zarniwhoop@ntlworld.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Ken Moffat <zarniwhoop@ntlworld.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Dave Airlie [Fri, 30 May 2014 23:19:05 +0000 (09:19 +1000)]
Merge branch 'drm-fixes-3.15' of git://people.freedesktop.org/~deathsimple/linux into drm-fixes
this is the next pull request for stashed up radeon fixes for 3.15. This is finally calming down with only four patches in this pull request.
* 'drm-fixes-3.15' of git://people.freedesktop.org/~deathsimple/linux:
drm/radeon: only allocate necessary size for vm bo list
drm/radeon: don't allow RADEON_GEM_DOMAIN_CPU for command submission
drm/radeon: avoid crash if VM command submission isn't available
drm/radeon: lower the ref * post PLL maximum once more
Jens Axboe [Fri, 30 May 2014 21:42:56 +0000 (15:42 -0600)]
blk-mq: remember to start timeout handler for direct queue
Commit
07068d5b8e added a direct-to-hw-queue mode, but this mode
needs to remember to add the request timeout handler as well.
Without it, we don't track timeouts for these requests.
Signed-off-by: Jens Axboe <axboe@fb.com>
Jens Axboe [Fri, 30 May 2014 21:41:39 +0000 (15:41 -0600)]
block: ensure that the timer is always added
Commit
f793aa537866 relaxed the timer addition a little too much.
If the timer isn't pending, we always need to add it.
Signed-off-by: Jens Axboe <axboe@fb.com>
Linus Torvalds [Fri, 30 May 2014 19:07:48 +0000 (12:07 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
"A couple of driver/build fixups and also redone quirk for Synaptics
touchpads on Lenovo boxes (now using PNP IDs instead of DMI data to
limit number of quirks)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics - change min/max quirk table to pnp-id matching
Input: synaptics - add a matches_pnp_id helper function
Input: synaptics - T540p - unify with other LEN0034 models
Input: synaptics - add min/max quirk for the ThinkPad W540
Input: ambakmi - request a shared interrupt for AMBA KMI devices
Input: pxa27x-keypad - fix generating scancode
Input: atmel-wm97xx - only build for AVR32
Input: fix ps2/serio module dependency
Linus Torvalds [Fri, 30 May 2014 19:06:15 +0000 (12:06 -0700)]
Merge tag 'firewire-fixes' of git://git./linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Stefan Richter:
"A regression fix for the IEEE 1394 subsystem: re-enable IRQ-based
asynchronous request reception at addresses below 128 TB"
* tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: revert to 4 GB RDMA, fix protocols using Memory Space
Linus Torvalds [Fri, 30 May 2014 19:04:56 +0000 (12:04 -0700)]
Merge tag 'dm-3.15-fixes-3' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device-mapper fixes from Mike Snitzer:
"A dm-cache stable fix to split discards on cache block boundaries
because dm-cache cannot yet handle discards that span cache blocks.
Really fix a dm-mpath LOCKDEP warning that was introduced in -rc1.
Add a 'no_space_timeout' control to dm-thinp to restore the ability to
queue IO indefinitely when no data space is available. This fixes a
change in behavior that was introduced in -rc6 where the timeout
couldn't be disabled"
* tag 'dm-3.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm mpath: really fix lockdep warning
dm cache: always split discards on cache block boundaries
dm thin: add 'no_space_timeout' dm-thin-pool module param
Tushar Behera [Fri, 30 May 2014 17:21:50 +0000 (02:21 +0900)]
ARM: dts: add secure firmware support for exynos5420-arndale-octa
Arndale-Octa board is always configured to work with trustzone
firmware binary. Added DTS node entry to enable this support.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Minchan Kim [Wed, 28 May 2014 06:53:59 +0000 (15:53 +0900)]
x86_64: expand kernel stack to 16K
While I play inhouse patches with much memory pressure on qemu-kvm,
3.14 kernel was randomly crashed. The reason was kernel stack overflow.
When I investigated the problem, the callstack was a little bit deeper
by involve with reclaim functions but not direct reclaim path.
I tried to diet stack size of some functions related with alloc/reclaim
so did a hundred of byte but overflow was't disappeard so that I encounter
overflow by another deeper callstack on reclaim/allocator path.
Of course, we might sweep every sites we have found for reducing
stack usage but I'm not sure how long it saves the world(surely,
lots of developer start to add nice features which will use stack
agains) and if we consider another more complex feature in I/O layer
and/or reclaim path, it might be better to increase stack size(
meanwhile, stack usage on 64bit machine was doubled compared to 32bit
while it have sticked to 8K. Hmm, it's not a fair to me and arm64
already expaned to 16K. )
So, my stupid idea is just let's expand stack size and keep an eye
toward stack consumption on each kernel functions via stacktrace of ftrace.
For example, we can have a bar like that each funcion shouldn't exceed 200K
and emit the warning when some function consumes more in runtime.
Of course, it could make false positive but at least, it could make a
chance to think over it.
I guess this topic was discussed several time so there might be
strong reason not to increase kernel stack size on x86_64, for me not
knowing so Ccing x86_64 maintainers, other MM guys and virtio
maintainers.
Here's an example call trace using up the kernel stack:
Depth Size Location (51 entries)
----- ---- --------
0) 7696 16 lookup_address
1) 7680 16 _lookup_address_cpa.isra.3
2) 7664 24 __change_page_attr_set_clr
3) 7640 392 kernel_map_pages
4) 7248 256 get_page_from_freelist
5) 6992 352 __alloc_pages_nodemask
6) 6640 8 alloc_pages_current
7) 6632 168 new_slab
8) 6464 8 __slab_alloc
9) 6456 80 __kmalloc
10) 6376 376 vring_add_indirect
11) 6000 144 virtqueue_add_sgs
12) 5856 288 __virtblk_add_req
13) 5568 96 virtio_queue_rq
14) 5472 128 __blk_mq_run_hw_queue
15) 5344 16 blk_mq_run_hw_queue
16) 5328 96 blk_mq_insert_requests
17) 5232 112 blk_mq_flush_plug_list
18) 5120 112 blk_flush_plug_list
19) 5008 64 io_schedule_timeout
20) 4944 128 mempool_alloc
21) 4816 96 bio_alloc_bioset
22) 4720 48 get_swap_bio
23) 4672 160 __swap_writepage
24) 4512 32 swap_writepage
25) 4480 320 shrink_page_list
26) 4160 208 shrink_inactive_list
27) 3952 304 shrink_lruvec
28) 3648 80 shrink_zone
29) 3568 128 do_try_to_free_pages
30) 3440 208 try_to_free_pages
31) 3232 352 __alloc_pages_nodemask
32) 2880 8 alloc_pages_current
33) 2872 200 __page_cache_alloc
34) 2672 80 find_or_create_page
35) 2592 80 ext4_mb_load_buddy
36) 2512 176 ext4_mb_regular_allocator
37) 2336 128 ext4_mb_new_blocks
38) 2208 256 ext4_ext_map_blocks
39) 1952 160 ext4_map_blocks
40) 1792 384 ext4_writepages
41) 1408 16 do_writepages
42) 1392 96 __writeback_single_inode
43) 1296 176 writeback_sb_inodes
44) 1120 80 __writeback_inodes_wb
45) 1040 160 wb_writeback
46) 880 208 bdi_writeback_workfn
47) 672 144 process_one_work
48) 528 112 worker_thread
49) 416 240 kthread
50) 176 176 ret_from_fork
[ Note: the problem is exacerbated by certain gcc versions that seem to
generate much bigger stack frames due to apparently bad coalescing of
temporaries and generating too many spills. Rusty saw gcc-4.6.4 using
35% more stack on the virtio path than 4.8.2 does, for example.
Minchan not only uses such a bad gcc version (4.6.3 in his case), but
some of the stack use is due to debugging (CONFIG_DEBUG_PAGEALLOC is
what causes that kernel_map_pages() frame, for example). But we're
clearly getting too close.
The VM code also seems to have excessive stack frames partly for the
same compiler reason, triggered by excessive inlining and lots of
function arguments.
We need to improve on our stack use, but in the meantime let's do this
simple stack increase too. Unlike most earlier reports, there is
nothing simple that stands out as being really horribly wrong here,
apart from the fact that the stack frames are just bigger than they
should need to be. - Linus ]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michael S Tsirkin <mst@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: PJ Waskiewicz <pjwaskiewicz@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kukjin Kim [Tue, 27 May 2014 15:04:34 +0000 (00:04 +0900)]
ARM: EXYNOS: mcpm rename the power_down_finish
Since commit
166aaf39 ("ARM: 8029/1: mcpm: Rename the power_down_finish()
functions to be less confusing") changed the name of power_down_finish to
wait_for_cpu_powerdown, so use new member name wait_for_cpu_powerdown.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Tomasz Figa [Sun, 25 May 2014 21:26:03 +0000 (06:26 +0900)]
cpufreq: exynos: Fix driver compilation with ARCH_MULTIPLATFORM
Currently Exynos cpufreq drivers rely on globally mapped
clock controller registers to configure frequency of CPU
cores. This is obviously wrong and will be removed in near
future, but to enable support for multi-platform builds
without introducing a regression it needs to be worked
around.
This patch hacks the code to look for clock controller node
in device tree and map its registers using of_iomap(),
instead of relying on global mapping, so dependencies on
platform headers are removed and the driver can compile
again with multiplatform support.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Abhilash Kesavan [Tue, 27 May 2014 16:19:35 +0000 (01:19 +0900)]
ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC
The exynos5800 is very similar to exynos5420. We can re-use
the existing MCPM support for exynos5800 for secondary boot
-up and switching.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Arnd Bergmann [Sun, 25 May 2014 21:09:57 +0000 (06:09 +0900)]
ARM: EXYNOS: Enable multi-platform build support
This makes it possible to enable the Exynos platform as part of a
multiplatform kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Sachin Kamat [Sun, 25 May 2014 20:58:42 +0000 (05:58 +0900)]
ARM: EXYNOS: Consolidate Kconfig entries
Instead of repeating the Kconfig entries for every SoC,
move them under ARCH_EXYNOS3, 4 and 5 and move the entries
common to 3, 4 and 5 under ARCH_EXYNOS.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Tarek Dakhran [Mon, 26 May 2014 21:54:12 +0000 (06:54 +0900)]
ARM: EXYNOS: Add support for EXYNOS5410 SoC
EXYNOS5410 is SoC in Samsung's Exynos5 SoC series.
Add initial support for this SoC.
Signed-off-by: Tarek Dakhran <t.dakhran@samsung.com>
Signed-off-by: Vyacheslav Tyrtov <v.tyrtov@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Chanwoo Choi [Sun, 25 May 2014 19:12:32 +0000 (04:12 +0900)]
ARM: EXYNOS: Support secondary CPU boot of Exynos3250
This patch fix the offset of CPU boot address and don't
need to send smc call of SMC_CMD_CPU1BOOT command for
secondary CPU boot because Exynos3250 removes WFE in
secure mode.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Bjorn Helgaas [Fri, 30 May 2014 17:41:17 +0000 (11:41 -0600)]
Merge branches 'pci/host-exynos', 'pci/host-imx6', 'pci/resource' and 'pci/misc' into next
* pci/host-exynos:
PCI: exynos: Fix add_pcie_port() section mismatch warning
* pci/host-imx6:
PCI: imx6: Add support for MSI
PCI: designware: Make MSI ISR shared IRQ aware
PCI: imx6: Remove optional (and unused) IRQs
PCI: imx6: Drop old IRQ mapping
PCI: imx6: Use new clock names
PCI: imx6: Fix imx6_add_pcie_port() section mismatch warning
* pci/resource:
i82875p_edac: Assign PCI resources before adding device
* pci/misc:
ARM/PCI: Call pcie_bus_configure_settings() to set MPS
PCI: Make pci_bus_add_device() void
Conflicts:
drivers/edac/i82875p_edac.c
Bjorn Helgaas [Fri, 30 May 2014 17:40:13 +0000 (11:40 -0600)]
Merge branch 'pci/host-generic' into next
* pci/host-generic:
MAINTAINERS: Add generic PCI host controller driver
PCI: generic: Add generic PCI host controller driver
Conflicts:
drivers/pci/host/Kconfig
drivers/pci/host/Makefile
Chanwoo Choi [Sun, 25 May 2014 19:12:26 +0000 (04:12 +0900)]
ARM: EXYNOS: Add Exynos3250 SoC ID
This patch add Exynos3250's SoC ID. Exynos 3250 is SoC that
is based on the 32-bit RISC processor for Smartphone.
Exynos3250 uses Cortex-A7 dual cores and has a target speed
of 1.0GHz.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Arun Kumar K [Sun, 25 May 2014 19:16:11 +0000 (04:16 +0900)]
ARM: EXYNOS: Add 5800 SoC support
Exynos5800 is an octa core SoC which is based on the 5420
platform. This patch adds the basic support for it in the
mach-exynos.
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Pankaj Dubey [Sun, 25 May 2014 19:28:17 +0000 (04:28 +0900)]
ARM: EXYNOS: initial board support for exynos5260 SoC
This patch add basic arch side support for exynos5260 SoC.
Note that this is required to enable build for clock driver.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Fri, 30 May 2014 17:36:49 +0000 (02:36 +0900)]
Merge branch 'v3.16-next/cleanup-samsung' into v3.16-next/platform-exynos
Will Deacon [Thu, 1 May 2014 11:04:28 +0000 (12:04 +0100)]
MAINTAINERS: Add generic PCI host controller driver
Add myself as the maintainer for the generic PCI host controller driver.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Will Deacon [Fri, 22 Nov 2013 16:14:41 +0000 (16:14 +0000)]
PCI: generic: Add generic PCI host controller driver
Add support for a generic PCI host controller, such as a
firmware-initialised device with static windows or an emulation by
something such as kvmtool.
The controller itself has no configuration registers and has its address
spaces described entirely by the device-tree (using the bindings from
ePAPR). Both CAM and ECAM are supported for Config Space accesses.
Add corresponding documentation for the DT binding.
[bhelgaas: currently uses the ARM-specific pci_common_init_dev() interface]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Lucas Stach [Fri, 28 Mar 2014 16:52:59 +0000 (17:52 +0100)]
PCI: imx6: Add support for MSI
This patch adds support for Message Signaled Interrupts in the imx6-pcie
driver.
Signed-off-by: Harro Haan <hrhaan@gmail.com>
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <r65037@freescale.com>
Lucas Stach [Fri, 28 Mar 2014 16:52:58 +0000 (17:52 +0100)]
PCI: designware: Make MSI ISR shared IRQ aware
On i.MX6 the host controller MSI IRQ is shared with PCI legacy INTD. Make
sure we don't bail too early from the IRQ handler.
The issue is fairly theoretical as it would require a system setup with a
PCIe switch where one connected device is using legacy INTD and another one
using MSI, but better fix it now.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Richard Zhu <r65037@freescale.com>
Lucas Stach [Fri, 28 Mar 2014 16:52:57 +0000 (17:52 +0100)]
PCI: imx6: Remove optional (and unused) IRQs
They are dropped with the new binding.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <r65037@freescale.com>
Lucas Stach [Fri, 28 Mar 2014 16:52:56 +0000 (17:52 +0100)]
PCI: imx6: Drop old IRQ mapping
We don't need this anymore. The IRQs are now properly mapped through the
DT.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <r65037@freescale.com>
Lucas Stach [Fri, 28 Mar 2014 16:52:55 +0000 (17:52 +0100)]
PCI: imx6: Use new clock names
As defined in the new binding.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <r65037@freescale.com>
Chanwoo Choi [Fri, 30 May 2014 17:17:22 +0000 (02:17 +0900)]
ARM: dts: add pmu sysreg node to exynos3250
This patch add pmusysreg node for Exynos3250 to access PMU
(Power Management Unit) register in a centralized way using
syscon driver.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Tarek Dakhran [Mon, 26 May 2014 21:54:12 +0000 (06:54 +0900)]
clk: exynos5410: register clocks using common clock framework
The EXYNOS5410 clocks are statically listed and registered
using the Samsung specific common clock helper functions.
Signed-off-by: Tarek Dakhran <t.dakhran@samsung.com>
Signed-off-by: Vyacheslav Tyrtov <v.tyrtov@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Arun Kumar K [Fri, 30 May 2014 17:11:42 +0000 (02:11 +0900)]
ARM: dts: correct the usb phy node in exynos5800-peach-pi
The vbus-supply property is wrongly updated in the
usbdrd node instead of the usbdrd_phy node. This patch
fixes the same.
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Arun Kumar K [Fri, 30 May 2014 17:11:39 +0000 (02:11 +0900)]
ARM: dts: correct the usb phy node in exynos5420-peach-pit
The vbus-supply property is wrongly updated in the
usbdrd node instead of the usbdrd_phy node. This patch
fixes the same.
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Tarek Dakhran [Mon, 26 May 2014 21:54:13 +0000 (06:54 +0900)]
ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410
Add initial device tree nodes for EXYNOS5410 SoC and SMDK5410 board.
Signed-off-by: Tarek Dakhran <t.dakhran@samsung.com>
Signed-off-by: Vyacheslav Tyrtov <v.tyrtov@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Tomasz Figa [Wed, 14 May 2014 21:01:27 +0000 (06:01 +0900)]
ARM: dts: add dts files for exynos3250 SoC
This patch adds new exynos3250.dtsi to support Exynos3250 SoC
based on Cortex-A7 dual core and includes following dt nodes:
- GIC interrupt controller
- Pinctrl to control GPIOs
- Clock controller
- CPU information (Cortex-A7 dual core)
- UART to support serial port
- MCT (Multi Core Timer)
- ADC (Analog Digital Converter)
- I2C/SPI bus
- Power domain
- PMU (Performance Monitoring Unit)
- MSHC (Mobile Storage Host Controller)
- PWM (Pluse Width Modulation)
- AMBA bus
- sysram node for SYSRAM memory mapping
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Hyunhee Kim <hyunhee.kim@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: devicetree@vger.kernel.org
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Arun Kumar K [Thu, 22 May 2014 16:35:32 +0000 (01:35 +0900)]
ARM: dts: add mfc node for exynos5800
Adds the mfc node to exynos5800 which uses MFCv8.
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Vivek Gautam [Mon, 19 May 2014 13:32:11 +0000 (22:32 +0900)]
ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi
Add required fixed-regulator for VBUS supply for USB 3.0
controller phy.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Rahul Sharma [Fri, 16 May 2014 22:53:36 +0000 (07:53 +0900)]
ARM: dts: enable fimd for exynos5800-peach-pi
Enable FIMD for peach-pi board.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Rahul Sharma [Fri, 16 May 2014 22:51:33 +0000 (07:51 +0900)]
ARM: dts: enable display controller for exynos5800-peach-pi
Enable display controller with timing information for 1080p
panel in Exynos5800 peach-pi board.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Rahul Sharma [Thu, 15 May 2014 20:06:34 +0000 (05:06 +0900)]
ARM: dts: enable hdmi for exynos5800-peach-pi
Enable hdmi for peach-pi board.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Arun Kumar K [Sun, 11 May 2014 22:56:34 +0000 (07:56 +0900)]
ARM: dts: add dts file for exynos5800-peach-pi board
Adds support for google peach-pi board having the
Exynos5800 SoC.
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Arun Kumar K [Sun, 11 May 2014 22:55:41 +0000 (07:55 +0900)]
ARM: dts: add dts file for exynos5800 SoC
Most of the nodes of exynos5420 remains same for exynos5800.
So the exynos5420.dtsi is included in exynos5800 and the changed
node properties will be overriden.
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Rahul Sharma [Thu, 8 May 2014 21:26:44 +0000 (06:26 +0900)]
ARM: dts: add dts file for exynos5260-xyref5260 board
The patch adds the dts file for xyref5260 board which
is based on exynos5260 SoC.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Rahul Sharma [Thu, 8 May 2014 21:26:41 +0000 (06:26 +0900)]
ARM: dts: add dts files for exynos5260 SoC
The patch adds the dts files for exynos5260.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Sachin Kamat [Tue, 27 May 2014 15:56:26 +0000 (00:56 +0900)]
ARM: dts: update watchdog node name in exynos5440
Made it as per DT node naming convention <name@reg_addr>.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Sachin Kamat [Tue, 27 May 2014 15:56:16 +0000 (00:56 +0900)]
ARM: dts: use key code macros on Origen and Arndale boards
Key code macros improve readability on exnos4210-origen,
exynos4412-origen and exynos5250-arndale boards.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
[kgene.kim@samsung.com: squashed similar two patches]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
projects / platform / kernel / linux-stable.git / log