Alexey Dobriyan [Sun, 14 Jan 2018 12:05:04 +0000 (15:05 +0300)]
x86/alternatives: Fixup alternative_call_2
The following pattern fails to compile while the same pattern
with alternative_call() does:
if (...)
alternative_call_2(...);
else
alternative_call_2(...);
as it expands into
if (...)
{
}; <===
else
{
};
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20180114120504.GA11368@avx2
Josh Poimboeuf [Thu, 22 Mar 2018 18:00:37 +0000 (13:00 -0500)]
objtool: Add Clang support
Since the ORC unwinder was made the default on x86_64, Clang-built
defconfig kernels have triggered some new objtool warnings:
drivers/gpu/drm/i915/i915_gpu_error.o: warning: objtool: i915_error_printf()+0x6c: return with modified stack frame
drivers/gpu/drm/i915/intel_display.o: warning: objtool: pipe_config_err()+0xa6: return with modified stack frame
The problem is that objtool has never seen clang-built binaries before.
Shockingly enough, objtool is apparently able to follow the code flow
mostly fine, except for one instruction sequence. Instead of a LEAVE
instruction, clang restores RSP and RBP the long way:
67c: 48 89 ec mov %rbp,%rsp
67f: 5d pop %rbp
Teach objtool about this new code sequence.
Reported-and-test-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/fce88ce81c356eedcae7f00ed349cfaddb3363cc.1521741586.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Thu, 23 Jul 2015 22:37:48 +0000 (15:37 -0700)]
x86/entry/64: Don't use IST entry for #BP stack
There's nothing IST-worthy about #BP/int3. We don't allow kprobes
in the small handful of places in the kernel that run at CPL0 with
an invalid stack, and 32-bit kernels have used normal interrupt
gates for #BP forever.
Furthermore, we don't allow kprobes in places that have usergs while
in kernel mode, so "paranoid" is also unnecessary.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Waiman Long [Thu, 22 Mar 2018 19:18:53 +0000 (15:18 -0400)]
x86/efi: Free efi_pgd with free_pages()
The efi_pgd is allocated as PGD_ALLOCATION_ORDER pages and therefore must
also be freed as PGD_ALLOCATION_ORDER pages with free_pages().
Fixes: d9e9a6418065 ("x86/mm/pti: Allocate a separate user PGD")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1521746333-19593-1-git-send-email-longman@redhat.com
Boris Ostrovsky [Mon, 19 Mar 2018 14:31:54 +0000 (10:31 -0400)]
x86/vsyscall/64: Use proper accessor to update P4D entry
Writing to it directly does not work for Xen PV guests.
Fixes: 49275fef986a ("x86/vsyscall/64: Explicitly set _PAGE_USER in the pagetable hierarchy")
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180319143154.3742-1-boris.ostrovsky@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Christoph Hellwig [Mon, 19 Mar 2018 10:38:13 +0000 (11:38 +0100)]
x86/cpu: Remove the CONFIG_X86_PPRO_FENCE=y quirk
There were only a few Pentium Pro multiprocessors systems where this
errata applied. They are more than 20 years old now, and we've slowly
dropped places which put the workarounds in and discouraged anyone
from enabling the workaround.
Get rid of it for good.
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-2-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
H.J. Lu [Mon, 19 Mar 2018 21:08:11 +0000 (14:08 -0700)]
x86/boot/64: Verify alignment of the LOAD segment
Since the x86-64 kernel must be aligned to 2MB, refuse to boot the
kernel if the alignment of the LOAD segment isn't a multiple of 2MB.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/CAMe9rOrR7xSJgUfiCoZLuqWUwymRxXPoGBW38%2BpN%3D9g%2ByKNhZw@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
H.J. Lu [Mon, 19 Mar 2018 20:57:46 +0000 (13:57 -0700)]
x86/build/64: Force the linker to use 2MB page size
Binutils 2.31 will enable -z separate-code by default for x86 to avoid
mixing code pages with data to improve cache performance as well as
security. To reduce x86-64 executable and shared object sizes, the
maximum page size is reduced from 2MB to 4KB. But x86-64 kernel must
be aligned to 2MB. Pass -z max-page-size=0x200000 to linker to force
2MB page size regardless of the default page size used by linker.
Tested with Linux kernel 4.15.6 on x86-64.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/CAMe9rOp4_%3D_8twdpTyAP2DhONOCeaTOsniJLoppzhoNptL8xzA@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Sat, 17 Mar 2018 15:25:07 +0000 (08:25 -0700)]
selftests/x86/ptrace_syscall: Fix for yet more glibc interference
glibc keeps getting cleverer, and my version now turns raise() into
more than one syscall. Since the test relies on ptrace seeing an
exact set of syscalls, this breaks the test. Replace raise(SIGSTOP)
with syscall(SYS_tgkill, ...) to force glibc to get out of our way.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/bc80338b453afa187bc5f895bd8e2c8d6e264da2.1521300271.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Borislav Petkov [Wed, 14 Mar 2018 18:36:15 +0000 (19:36 +0100)]
x86/microcode: Fix CPU synchronization routine
Emanuel reported an issue with a hang during microcode update because my
dumb idea to use one atomic synchronization variable for both rendezvous
- before and after update - was simply bollocks:
microcode: microcode_reload_late: late_cpus: 4
microcode: __reload_late: cpu 2 entered
microcode: __reload_late: cpu 1 entered
microcode: __reload_late: cpu 3 entered
microcode: __reload_late: cpu 0 entered
microcode: __reload_late: cpu 1 left
microcode: Timeout while waiting for CPUs rendezvous, remaining: 1
CPU1 above would finish, leave and the others will still spin waiting for
it to join.
So do two synchronization atomics instead, which makes the code a lot more
straightforward.
Also, since the update is serialized and it also takes quite some time per
microcode engine, increase the exit timeout by the number of CPUs on the
system.
That's ok because the moment all CPUs are done, that timeout will be cut
short.
Furthermore, panic when some of the CPUs timeout when returning from a
microcode update: we can't allow a system with not all cores updated.
Also, as an optimization, do not do the exit sync if microcode wasn't
updated.
Reported-by: Emanuel Czirai <xftroxgpx@protonmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Emanuel Czirai <xftroxgpx@protonmail.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20180314183615.17629-2-bp@alien8.de
Borislav Petkov [Wed, 14 Mar 2018 18:36:14 +0000 (19:36 +0100)]
x86/microcode: Attempt late loading only when new microcode is present
Return UCODE_NEW from the scanning functions to denote that new microcode
was found and only then attempt the expensive synchronization dance.
Reported-by: Emanuel Czirai <xftroxgpx@protonmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Emanuel Czirai <xftroxgpx@protonmail.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20180314183615.17629-1-bp@alien8.de
Alexander Sergeyev [Tue, 13 Mar 2018 19:38:56 +0000 (22:38 +0300)]
x86/speculation: Remove Skylake C2 from Speculation Control microcode blacklist
In accordance with Intel's microcode revision guidance from March 6 MCU
rev 0xc2 is cleared on both Skylake H/S and Skylake Xeon E3 processors
that share CPUID 506E3.
Signed-off-by: Alexander Sergeyev <sergeev917@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jia Zhang <qianyue.zj@alibaba-inc.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kyle Huey <me@kylehuey.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/20180313193856.GA8580@localhost.localdomain
Josh Poimboeuf [Wed, 14 Mar 2018 15:24:20 +0000 (10:24 -0500)]
jump_label: Fix sparc64 warning
The kbuild test robot reported the following warning on sparc64:
kernel/jump_label.c: In function '__jump_label_update':
kernel/jump_label.c:376:51: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
WARN_ONCE(1, "can't patch jump_label at %pS", (void *)entry->code);
On sparc64, the jump_label entry->code field is of type u32, but
pointers are 64-bit. Silence the warning by casting entry->code to an
unsigned long before casting it to a pointer. This is also what the
sparc jump label code does.
Fixes: dc1dd184c2f0 ("jump_label: Warn on failed jump_label patching attempt")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: "David S . Miller" <davem@davemloft.net>
Link: https://lkml.kernel.org/r/c966fed42be6611254a62d46579ec7416548d572.1521041026.git.jpoimboe@redhat.com
Andy Whitcroft [Wed, 14 Mar 2018 11:24:27 +0000 (11:24 +0000)]
x86/speculation, objtool: Annotate indirect calls/jumps for objtool on 32-bit kernels
In the following commit:
9e0e3c5130e9 ("x86/speculation, objtool: Annotate indirect calls/jumps for objtool")
... we added annotations for CALL_NOSPEC/JMP_NOSPEC on 64-bit x86 kernels,
but we did not annotate the 32-bit path.
Annotate it similarly.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180314112427.22351-1-apw@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Wed, 14 Mar 2018 05:03:12 +0000 (22:03 -0700)]
x86/vm86/32: Fix POPF emulation
POPF would trap if VIP was set regardless of whether IF was set. Fix it.
Suggested-by: Stas Sergeev <stsp@list.ru>
Reported-by: Bart Oldeman <bartoldeman@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 5ed92a8ab71f ("x86/vm86: Use the normal pt_regs area for vm86")
Link: http://lkml.kernel.org/r/ce95f40556e7b2178b6bc06ee9557827ff94bd28.1521003603.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Wed, 14 Mar 2018 05:03:11 +0000 (22:03 -0700)]
selftests/x86/entry_from_vm86: Add test cases for POPF
POPF is currently broken -- add tests to catch the error. This
results in:
[RUN] POPF with VIP set and IF clear from vm86 mode
[INFO] Exited vm86 mode due to STI
[FAIL] Incorrect return reason (started at eip = 0xd, ended at eip = 0xf)
because POPF currently fails to check IF before reporting a pending
interrupt.
This patch also makes the FAIL message a bit more informative.
Reported-by: Bart Oldeman <bartoldeman@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/a16270b5cfe7832d6d00c479d0f871066cbdb52b.1521003603.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Wed, 14 Mar 2018 05:03:10 +0000 (22:03 -0700)]
selftests/x86/entry_from_vm86: Exit with 1 if we fail
Fix a logic error that caused the test to exit with 0 even if test
cases failed.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bartoldeman@gmail.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/b1cc37144038958a469c8f70a5f47a6a5638636a.1521003603.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kirill A. Shutemov [Mon, 5 Mar 2018 16:25:51 +0000 (19:25 +0300)]
x86/cpufeatures: Add Intel PCONFIG cpufeature
CPUID.0x7.0x0:EDX[18] indicates whether Intel CPU support PCONFIG instruction.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-4-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kirill A. Shutemov [Mon, 5 Mar 2018 16:25:49 +0000 (19:25 +0300)]
x86/cpufeatures: Add Intel Total Memory Encryption cpufeature
CPUID.0x7.0x0:ECX[13] indicates whether CPU supports Intel Total Memory
Encryption.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-2-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Francis Deslauriers [Fri, 9 Mar 2018 03:18:12 +0000 (22:18 -0500)]
x86/kprobes: Fix kernel crash when probing .entry_trampoline code
Disable the kprobe probing of the entry trampoline:
.entry_trampoline is a code area that is used to ensure page table
isolation between userspace and kernelspace.
At the beginning of the execution of the trampoline, we load the
kernel's CR3 register. This has the effect of enabling the translation
of the kernel virtual addresses to physical addresses. Before this
happens most kernel addresses can not be translated because the running
process' CR3 is still used.
If a kprobe is placed on the trampoline code before that change of the
CR3 register happens the kernel crashes because int3 handling pages are
not accessible.
To fix this, add the .entry_trampoline section to the kprobe blacklist
to prohibit the probing of code before all the kernel pages are
accessible.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: mathieu.desnoyers@efficios.com
Cc: mhiramat@kernel.org
Link: http://lkml.kernel.org/r/1520565492-4637-2-git-send-email-francis.deslauriers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Seunghun Han [Wed, 7 Mar 2018 04:32:15 +0000 (13:32 +0900)]
x86/pti: Fix a comment typo
s/visinble/visible/
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1520397135-132809-1-git-send-email-kkamagui@gmail.com
Ashok Raj [Wed, 28 Feb 2018 10:28:46 +0000 (11:28 +0100)]
x86/microcode: Synchronize late microcode loading
Original idea by Ashok, completely rewritten by Borislav.
Before you read any further: the early loading method is still the
preferred one and you should always do that. The following patch is
improving the late loading mechanism for long running jobs and cloud use
cases.
Gather all cores and serialize the microcode update on them by doing it
one-by-one to make the late update process as reliable as possible and
avoid potential issues caused by the microcode update.
[ Borislav: Rewrite completely. ]
Co-developed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Link: https://lkml.kernel.org/r/20180228102846.13447-8-bp@alien8.de
Borislav Petkov [Wed, 28 Feb 2018 10:28:45 +0000 (11:28 +0100)]
x86/microcode: Request microcode on the BSP
... so that any newer version can land in the cache and can later be
fished out by the application functions. Do that before grabbing the
hotplug lock.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Link: https://lkml.kernel.org/r/20180228102846.13447-7-bp@alien8.de
Borislav Petkov [Wed, 28 Feb 2018 10:28:44 +0000 (11:28 +0100)]
x86/microcode/intel: Look into the patch cache first
The cache might contain a newer patch - look in there first.
A follow-on change will make sure newest patches are loaded into the
cache of microcode patches.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Link: https://lkml.kernel.org/r/20180228102846.13447-6-bp@alien8.de
Ashok Raj [Wed, 28 Feb 2018 10:28:43 +0000 (11:28 +0100)]
x86/microcode: Do not upload microcode if CPUs are offline
Avoid loading microcode if any of the CPUs are offline, and issue a
warning. Having different microcode revisions on the system at any time
is outright dangerous.
[ Borislav: Massage changelog. ]
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Link: http://lkml.kernel.org/r/1519352533-15992-4-git-send-email-ashok.raj@intel.com
Link: https://lkml.kernel.org/r/20180228102846.13447-5-bp@alien8.de
Ashok Raj [Wed, 28 Feb 2018 10:28:42 +0000 (11:28 +0100)]
x86/microcode/intel: Writeback and invalidate caches before updating microcode
Updating microcode is less error prone when caches have been flushed and
depending on what exactly the microcode is updating. For example, some
of the issues around certain Broadwell parts can be addressed by doing a
full cache flush.
[ Borislav: Massage it and use native_wbinvd() in both cases. ]
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Link: http://lkml.kernel.org/r/1519352533-15992-3-git-send-email-ashok.raj@intel.com
Link: https://lkml.kernel.org/r/20180228102846.13447-4-bp@alien8.de
Ashok Raj [Wed, 28 Feb 2018 10:28:41 +0000 (11:28 +0100)]
x86/microcode/intel: Check microcode revision before updating sibling threads
After updating microcode on one of the threads of a core, the other
thread sibling automatically gets the update since the microcode
resources on a hyperthreaded core are shared between the two threads.
Check the microcode revision on the CPU before performing a microcode
update and thus save us the WRMSR 0x79 because it is a particularly
expensive operation.
[ Borislav: Massage changelog and coding style. ]
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Link: http://lkml.kernel.org/r/1519352533-15992-2-git-send-email-ashok.raj@intel.com
Link: https://lkml.kernel.org/r/20180228102846.13447-3-bp@alien8.de
Borislav Petkov [Wed, 28 Feb 2018 10:28:40 +0000 (11:28 +0100)]
x86/microcode: Get rid of struct apply_microcode_ctx
It is a useless remnant from earlier times. Use the ucode_state enum
directly.
No functional change.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Link: https://lkml.kernel.org/r/20180228102846.13447-2-bp@alien8.de
Konrad Rzeszutek Wilk [Mon, 26 Feb 2018 14:35:01 +0000 (09:35 -0500)]
x86/spectre_v2: Don't check microcode versions when running under hypervisors
As:
1) It's known that hypervisors lie about the environment anyhow (host
mismatch)
2) Even if the hypervisor (Xen, KVM, VMWare, etc) provided a valid
"correct" value, it all gets to be very murky when migration happens
(do you provide the "new" microcode of the machine?).
And in reality the cloud vendors are the ones that should make sure that
the microcode that is running is correct and we should just sing lalalala
and trust them.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Cc: kvm <kvm@vger.kernel.org>
Cc: Krčmář <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180226213019.GE9497@char.us.oracle.com
Andy Lutomirski [Wed, 7 Mar 2018 19:12:27 +0000 (11:12 -0800)]
x86/vsyscall/64: Drop "native" vsyscalls
Since Linux v3.2, vsyscalls have been deprecated and slow. From v3.2
on, Linux had three vsyscall modes: "native", "emulate", and "none".
"emulate" is the default. All known user programs work correctly in
emulate mode, but vsyscalls turn into page faults and are emulated.
This is very slow. In "native" mode, the vsyscall page is easily
usable as an exploit gadget, but vsyscalls are a bit faster -- they
turn into normal syscalls. (This is in contrast to vDSO functions,
which can be much faster than syscalls.) In "none" mode, there are
no vsyscalls.
For all practical purposes, "native" was really just a chicken bit
in case something went wrong with the emulation. It's been over six
years, and nothing has gone wrong. Delete it.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Kernel Hardening <kernel-hardening@lists.openwall.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/519fee5268faea09ae550776ce969fa6e88668b0.1520449896.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dominik Brodowski [Tue, 6 Mar 2018 21:18:09 +0000 (22:18 +0100)]
x86/entry/64/compat: Save one instruction in entry_INT80_compat()
As %rdi is never user except in the following push, there is no
need to restore %rdi to the original value.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@amacapital.net
Cc: viro@zeniv.linux.org.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dominik Brodowski [Tue, 6 Mar 2018 21:18:08 +0000 (22:18 +0100)]
x86/entry: Do not special-case clone(2) in compat entry
With the CPU renaming registers on its own, and all the overhead of the
syscall entry/exit, it is doubtful whether the compiled output of
mov %r8, %rax
mov %rcx, %r8
mov %rax, %rcx
jmpq sys_clone
is measurably slower than the hand-crafted version of
xchg %r8, %rcx
So get rid of this special case.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@amacapital.net
Cc: viro@zeniv.linux.org.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dominik Brodowski [Tue, 6 Mar 2018 21:18:07 +0000 (22:18 +0100)]
x86/syscalls: Use COMPAT_SYSCALL_DEFINEx() macros for x86-only compat syscalls
While at it, convert declarations of type "unsigned" to "unsigned int".
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@amacapital.net
Cc: viro@zeniv.linux.org.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dominik Brodowski [Tue, 6 Mar 2018 21:18:05 +0000 (22:18 +0100)]
x86/syscalls: Use proper syscall definition for sys_ioperm()
Using SYSCALL_DEFINEx() is recommended, so use it also here.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@amacapital.net
Cc: viro@zeniv.linux.org.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dominik Brodowski [Tue, 6 Mar 2018 21:18:04 +0000 (22:18 +0100)]
x86/entry: Remove stale syscall prototype
sys32_vm86_warning() is long gone.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@amacapital.net
Cc: viro@zeniv.linux.org.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dominik Brodowski [Tue, 6 Mar 2018 21:18:03 +0000 (22:18 +0100)]
x86/syscalls/32: Simplify $entry == $compat entries
If the compat entry point is equivalent to the native entry point, it
does not need to be specified explicitly.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@amacapital.net
Cc: viro@zeniv.linux.org.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Tue, 6 Mar 2018 23:58:15 +0000 (17:58 -0600)]
objtool: Fix 32-bit build
Fix the objtool build when cross-compiling a 64-bit kernel on a 32-bit
host. This also simplifies read_retpoline_hints() a bit and makes its
implementation similar to most of the other annotation reading
functions.
Reported-by: Sven Joachim <svenjoac@gmx.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b5bc2231b8ad ("objtool: Add retpoline validation")
Link: http://lkml.kernel.org/r/2ca46c636c23aa9c9d57d53c75de4ee3ddf7a7df.1520380691.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Wed, 28 Feb 2018 20:14:26 +0000 (21:14 +0100)]
x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table
The separation of the cpu_entry_area from the fixmap missed the fact that
on 32bit non-PAE kernels the cpu_entry_area mapping might not be covered in
initial_page_table by the previous synchronizations.
This results in suspend/resume failures because 32bit utilizes initial page
table for resume. The absence of the cpu_entry_area mapping results in a
triple fault, aka. insta reboot.
With PAE enabled this works by chance because the PGD entry which covers
the fixmap and other parts incindentally provides the cpu_entry_area
mapping as well.
Synchronize the initial page table after setting up the cpu entry
area. Instead of adding yet another copy of the same code, move it to a
function and invoke it from the various places.
It needs to be investigated if the existing calls in setup_arch() and
setup_per_cpu_areas() can be replaced by the later invocation from
setup_cpu_entry_areas(), but that's beyond the scope of this fix.
Fixes: 92a0f81d8957 ("x86/cpu_entry_area: Move it out of the fixmap")
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Woody Suwalski <terraluna977@gmail.com>
Cc: William Grant <william.grant@canonical.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1802282137290.1392@nanos.tec.linutronix.de
Josh Poimboeuf [Wed, 28 Feb 2018 13:19:21 +0000 (07:19 -0600)]
objtool: Fix another switch table detection issue
Continue the switch table detection whack-a-mole. Add a check to
distinguish KASAN data reads from switch data reads. The switch jump
tables in .rodata have relocations associated with them.
This fixes the following warning:
crypto/asymmetric_keys/x509_cert_parser.o: warning: objtool: x509_note_pkey_algo()+0xa4: sibling call from callable instruction with modified stack frame
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/d7c8853022ad47d158cb81e953a40469fc08a95e.1519784382.git.jpoimboe@redhat.com
Juergen Gross [Mon, 26 Feb 2018 14:08:18 +0000 (15:08 +0100)]
x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend
Older Xen versions (4.5 and before) might have problems migrating pv
guests with MSR_IA32_SPEC_CTRL having a non-zero value. So before
suspending zero that MSR and restore it after being resumed.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Cc: boris.ostrovsky@oracle.com
Link: https://lkml.kernel.org/r/20180226140818.4849-1-jgross@suse.com
Paolo Bonzini [Thu, 22 Feb 2018 15:43:18 +0000 (16:43 +0100)]
KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR path as unlikely()
vmx_vcpu_run() and svm_vcpu_run() are large functions, and giving
branch hints to the compiler can actually make a substantial cycle
difference by keeping the fast path contiguous in memory.
With this optimization, the retpoline-guest/retpoline-host case is
about 50 cycles faster.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180222154318.20361-3-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Paolo Bonzini [Thu, 22 Feb 2018 15:43:17 +0000 (16:43 +0100)]
KVM/x86: Remove indirect MSR op calls from SPEC_CTRL
Having a paravirt indirect call in the IBRS restore path is not a
good idea, since we are trying to protect from speculative execution
of bogus indirect branch targets. It is also slower, so use
native_wrmsrl() on the vmentry path too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: d28b387fb74da95d69d2615732f50cceb38e9a4d
Link: http://lkml.kernel.org/r/20180222154318.20361-2-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Tue, 6 Feb 2018 08:46:13 +0000 (09:46 +0100)]
objtool, retpolines: Integrate objtool with retpoline support more closely
Disable retpoline validation in objtool if your compiler sucks, and otherwise
select the validation stuff for CONFIG_RETPOLINE=y (most builds would already
have it set due to ORC).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Wed, 21 Feb 2018 02:42:14 +0000 (20:42 -0600)]
x86/entry/64: Simplify ENCODE_FRAME_POINTER
On 64-bit, the stack pointer is always aligned on interrupt, so instead
of setting the LSB of the pt_regs address, we can just add 1 to it.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180221024214.lhl5jfgw33c4vz3m@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Tue, 20 Feb 2018 17:37:53 +0000 (11:37 -0600)]
extable: Make init_kernel_text() global
Convert init_kernel_text() to a global function and use it in a few
places instead of manually comparing _sinittext and _einittext.
Note that kallsyms.h has a very similar function called
is_kernel_inittext(), but its end check is inclusive. I'm not sure
whether that's intentional behavior, so I didn't touch it.
Suggested-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/4335d02be8d45ca7d265d2f174251d0b7ee6c5fd.1519051220.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Tue, 20 Feb 2018 17:37:52 +0000 (11:37 -0600)]
jump_label: Warn on failed jump_label patching attempt
Currently when the jump label code encounters an address which isn't
recognized by kernel_text_address(), it just silently fails.
This can be dangerous because jump labels are used in a variety of
places, and are generally expected to work. Convert the silent failure
to a warning.
This won't warn about attempted writes to tracepoints in __init code
after initmem has been freed, as those are already guarded by the
entry->code check.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/de3a271c93807adb7ed48f4e946b4f9156617680.1519051220.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Tue, 20 Feb 2018 17:37:51 +0000 (11:37 -0600)]
jump_label: Explicitly disable jump labels in __init code
After initmem has been freed, any jump labels in __init code are
prevented from being written to by the kernel_text_address() check in
__jump_label_update(). However, this check is quite broad. If
kernel_text_address() were to return false for any other reason, the
jump label write would fail silently with no warning.
For jump labels in module init code, entry->code is set to zero to
indicate that the entry is disabled. Do the same thing for core kernel
init code. This makes the behavior more consistent, and will also make
it more straightforward to detect non-init jump label write failures in
the next patch.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/c52825c73f3a174e8398b6898284ec20d4deb126.1519051220.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dominik Brodowski [Tue, 20 Feb 2018 21:01:13 +0000 (22:01 +0100)]
x86/entry/64: Open-code switch_to_thread_stack()
Open-code the two instances which called switch_to_thread_stack(). This
allows us to remove the wrapper around DO_SWITCH_TO_THREAD_STACK.
While at it, update the UNWIND hint to reflect where the IRET frame is,
and update the commentary to reflect what we are actually doing here.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: dan.j.williams@intel.com
Link: http://lkml.kernel.org/r/20180220210113.6725-7-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dominik Brodowski [Tue, 20 Feb 2018 21:01:12 +0000 (22:01 +0100)]
x86/entry/64: Move ASM_CLAC to interrupt_entry()
Moving ASM_CLAC to interrupt_entry means two instructions (addq / pushq
and call interrupt_entry) are not covered by it. However, it offers a
noticeable size reduction (-.2k):
text data bss dec hex filename
16882 0 0 16882 41f2 entry_64.o-orig
16623 0 0 16623 40ef entry_64.o
Suggested-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: dan.j.williams@intel.com
Link: http://lkml.kernel.org/r/20180220210113.6725-6-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dominik Brodowski [Tue, 20 Feb 2018 21:01:11 +0000 (22:01 +0100)]
x86/entry/64: Remove 'interrupt' macro
It is now trivial to call interrupt_entry() and then the actual worker.
Therefore, remove the interrupt macro and open code it all.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: dan.j.williams@intel.com
Link: http://lkml.kernel.org/r/20180220210113.6725-5-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dominik Brodowski [Tue, 20 Feb 2018 21:01:10 +0000 (22:01 +0100)]
x86/entry/64: Move the switch_to_thread_stack() call to interrupt_entry()
We can also move the CLD, SWAPGS, and the switch_to_thread_stack() call
to the interrupt_entry() helper function. As we do not want call depths
of two, convert switch_to_thread_stack() to a macro.
However, switch_to_thread_stack() has another user in entry_64_compat.S,
which currently expects it to be a function. To keep the code changes
in this patch minimal, create a wrapper function.
The switch to a macro means that there is some binary code duplication
if CONFIG_IA32_EMULATION=y is enabled. Therefore, the size reduction
differs whether CONFIG_IA32_EMULATION is enabled or not:
CONFIG_IA32_EMULATION=y (-0.13k):
text data bss dec hex filename
17158 0 0 17158 4306 entry_64.o-orig
17028 0 0 17028 4284 entry_64.o
CONFIG_IA32_EMULATION=n (-0.27k):
text data bss dec hex filename
17158 0 0 17158 4306 entry_64.o-orig
16882 0 0 16882 41f2 entry_64.o
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: dan.j.williams@intel.com
Link: http://lkml.kernel.org/r/20180220210113.6725-4-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dominik Brodowski [Tue, 20 Feb 2018 21:01:09 +0000 (22:01 +0100)]
x86/entry/64: Move ENTER_IRQ_STACK from interrupt macro to interrupt_entry
Moving the switch to IRQ stack from the interrupt macro to the helper
function requires some trickery: All ENTER_IRQ_STACK really cares about
is where the "original" stack -- meaning the GP registers etc. -- is
stored. Therefore, we need to offset the stored RSP value by 8 whenever
ENTER_IRQ_STACK is called from within a function. In such cases, and
after switching to the IRQ stack, we need to push the "original" return
address (i.e. the return address from the call to the interrupt entry
function) to the IRQ stack.
This trickery allows us to carve another .85k from the text size (it
would be more except for the additional unwind hints):
text data bss dec hex filename
18006 0 0 18006 4656 entry_64.o-orig
17158 0 0 17158 4306 entry_64.o
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: dan.j.williams@intel.com
Link: http://lkml.kernel.org/r/20180220210113.6725-3-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dominik Brodowski [Tue, 20 Feb 2018 21:01:08 +0000 (22:01 +0100)]
x86/entry/64: Move PUSH_AND_CLEAR_REGS from interrupt macro to helper function
The PUSH_AND_CLEAR_REGS macro is able to insert the GP registers
"above" the original return address. This allows us to move a sizeable
part of the interrupt entry macro to an interrupt entry helper function:
text data bss dec hex filename
21088 0 0 21088 5260 entry_64.o-orig
18006 0 0 18006 4656 entry_64.o
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: dan.j.williams@intel.com
Link: http://lkml.kernel.org/r/20180220210113.6725-2-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Wed, 21 Feb 2018 08:20:37 +0000 (09:20 +0100)]
x86/speculation: Move firmware_restrict_branch_speculation_*() from C to CPP
firmware_restrict_branch_speculation_*() recently started using
preempt_enable()/disable(), but those are relatively high level
primitives and cause build failures on some 32-bit builds.
Since we want to keep <asm/nospec-branch.h> low level, convert
them to macros to avoid header hell...
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: arjan.van.de.ven@intel.com
Cc: bp@alien8.de
Cc: dave.hansen@intel.com
Cc: jmattson@google.com
Cc: karahmed@amazon.de
Cc: kvm@vger.kernel.org
Cc: pbonzini@redhat.com
Cc: rkrcmar@redhat.com
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 31 Jan 2018 09:18:28 +0000 (10:18 +0100)]
objtool: Add module specific retpoline rules
David allowed retpolines in .init.text, except for modules, which will
trip up objtool retpoline validation, fix that.
Requested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Tue, 16 Jan 2018 09:24:06 +0000 (10:24 +0100)]
objtool: Add retpoline validation
David requested a objtool validation pass for CONFIG_RETPOLINE=y enabled
builds, where it validates no unannotated indirect jumps or calls are
left.
Add an additional .discard.retpoline_safe section to allow annotating
the few indirect sites that are required and safe.
Requested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Tue, 16 Jan 2018 16:16:32 +0000 (17:16 +0100)]
objtool: Use existing global variables for options
Use the existing global variables instead of passing them around and
creating duplicate global variables.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Tue, 23 Jan 2018 15:18:50 +0000 (16:18 +0100)]
x86/mm/sme, objtool: Annotate indirect call in sme_encrypt_execute()
This is boot code and thus Spectre-safe: we run this _way_ before userspace
comes along to have a chance to poison our branch predictor.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Tue, 16 Jan 2018 09:38:09 +0000 (10:38 +0100)]
x86/boot, objtool: Annotate indirect jump in secondary_startup_64()
The objtool retpoline validation found this indirect jump. Seeing how
it's on CPU bringup before we run userspace it should be safe, annotate
it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 17 Jan 2018 15:58:11 +0000 (16:58 +0100)]
x86/paravirt, objtool: Annotate indirect calls
Paravirt emits indirect calls which get flagged by objtool retpoline
checks, annotate it away because all these indirect calls will be
patched out before we start userspace.
This patching happens through alternative_instructions() ->
apply_paravirt() -> pv_init_ops.patch() which will eventually end up
in paravirt_patch_default(). This function _will_ write direct
alternatives.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 17 Jan 2018 21:34:34 +0000 (22:34 +0100)]
x86/speculation, objtool: Annotate indirect calls/jumps for objtool
Annotate the indirect calls/jumps in the CALL_NOSPEC/JUMP_NOSPEC
alternatives.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David Woodhouse [Mon, 19 Feb 2018 10:50:57 +0000 (10:50 +0000)]
x86/retpoline: Support retpoline builds with Clang
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: arjan.van.de.ven@intel.com
Cc: bp@alien8.de
Cc: dave.hansen@intel.com
Cc: jmattson@google.com
Cc: karahmed@amazon.de
Cc: kvm@vger.kernel.org
Cc: pbonzini@redhat.com
Cc: rkrcmar@redhat.com
Link: http://lkml.kernel.org/r/1519037457-7643-5-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David Woodhouse [Mon, 19 Feb 2018 10:50:54 +0000 (10:50 +0000)]
x86/speculation: Use IBRS if available before calling into firmware
Retpoline means the kernel is safe because it has no indirect branches.
But firmware isn't, so use IBRS for firmware calls if it's available.
Block preemption while IBRS is set, although in practice the call sites
already had to be doing that.
Ignore hpwdt.c for now. It's taking spinlocks and calling into firmware
code, from an NMI handler. I don't want to touch that with a bargepole.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: arjan.van.de.ven@intel.com
Cc: bp@alien8.de
Cc: dave.hansen@intel.com
Cc: jmattson@google.com
Cc: karahmed@amazon.de
Cc: kvm@vger.kernel.org
Cc: pbonzini@redhat.com
Cc: rkrcmar@redhat.com
Link: http://lkml.kernel.org/r/1519037457-7643-2-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David Woodhouse [Mon, 19 Feb 2018 10:50:56 +0000 (10:50 +0000)]
Revert "x86/retpoline: Simplify vmexit_fill_RSB()"
This reverts commit
1dde7415e99933bb7293d6b2843752cbdb43ec11. By putting
the RSB filling out of line and calling it, we waste one RSB slot for
returning from the function itself, which means one fewer actual function
call we can make if we're doing the Skylake abomination of call-depth
counting.
It also changed the number of RSB stuffings we do on vmexit from 32,
which was correct, to 16. Let's just stop with the bikeshedding; it
didn't actually *fix* anything anyway.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: arjan.van.de.ven@intel.com
Cc: bp@alien8.de
Cc: dave.hansen@intel.com
Cc: jmattson@google.com
Cc: karahmed@amazon.de
Cc: kvm@vger.kernel.org
Cc: pbonzini@redhat.com
Cc: rkrcmar@redhat.com
Link: http://lkml.kernel.org/r/1519037457-7643-4-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jan Beulich [Mon, 19 Feb 2018 15:06:14 +0000 (08:06 -0700)]
x86-64/realmode: Add instruction suffix
Omitting suffixes from instructions in AT&T mode is bad practice when
operand size cannot be determined by the assembler from register
operands, and is likely going to be warned about by upstream GAS in the
future (mine does already). Add the single missing suffix here.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5A8AF5F602000078001A9230@prv-mh.provo.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jan Beulich [Mon, 19 Feb 2018 14:52:10 +0000 (07:52 -0700)]
x86/LDT: Avoid warning in 32-bit builds with older gcc
BUG() doesn't always imply "no return", and hence should be followed by
a return statement even if that's obviously (to a human) unreachable.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5A8AF2AA02000078001A91E9@prv-mh.provo.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jan Beulich [Mon, 19 Feb 2018 14:50:23 +0000 (07:50 -0700)]
x86/IO-APIC: Avoid warning in 32-bit builds
Constants wider than 32 bits should be tagged with ULL.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5A8AF23F02000078001A91E5@prv-mh.provo.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jan Beulich [Mon, 19 Feb 2018 14:49:12 +0000 (07:49 -0700)]
x86/asm: Improve how GEN_*_SUFFIXED_RMWcc() specify clobbers
Commit:
df3405245a ("x86/asm: Add suffix macro for GEN_*_RMWcc()")
... introduced "suffix" RMWcc operations, adding bogus clobber specifiers:
For one, on x86 there's no point explicitly clobbering "cc".
In fact, with GCC properly fixed, this results in an overlap being detected by
the compiler between outputs and clobbers.
Furthermore it seems bad practice to me to have clobber specification
and use of the clobbered register(s) disconnected - it should rather be
at the invocation place of that GEN_{UN,BIN}ARY_SUFFIXED_RMWcc() macros
that the clobber is specified which this particular invocation needs.
Drop the "cc" clobber altogether and move the "cx" one to refcount.h.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5A8AF1F802000078001A91E1@prv-mh.provo.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jann Horn [Mon, 19 Feb 2018 17:50:39 +0000 (18:50 +0100)]
x86/mm: Remove stale comment about KMEMCHECK
This comment referred to a conditional call to kmemcheck_hide() that was
here until commit
4950276672fc ("kmemcheck: remove annotations").
Now that kmemcheck has been removed, it doesn't make sense anymore.
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180219175039.253089-1-jannh@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jan Beulich [Mon, 19 Feb 2018 14:48:11 +0000 (07:48 -0700)]
x86/mm: Fix {pmd,pud}_{set,clear}_flags()
Just like pte_{set,clear}_flags() their PMD and PUD counterparts should
not do any address translation. This was outright wrong under Xen
(causing a dead boot with no useful output on "suitable" systems), and
produced needlessly more complicated code (even if just slightly) when
paravirt was enabled.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/5A8AF1BB02000078001A91C3@prv-mh.provo.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dominik Brodowski [Wed, 14 Feb 2018 17:59:24 +0000 (18:59 +0100)]
x86/entry/64: Use 'xorl' for faster register clearing
On some x86 CPU microarchitectures using 'xorq' to clear general-purpose
registers is slower than 'xorl'. As 'xorl' is sufficient to clear all
64 bits of these registers due to zero-extension [*], switch the x86
64-bit entry code to use 'xorl'.
No change in functionality and no change in code size.
[*] According to Intel 64 and IA-32 Architecture Software Developer's
Manual, section 3.4.1.1, the result of 32-bit operands are "zero-
extended to a 64-bit result in the destination general-purpose
register." The AMD64 Architecture Programmer’s Manual Volume 3,
Appendix B.1, describes the same behaviour.
Suggested-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180214175924.23065-3-linux@dominikbrodowski.net
[ Improved on the changelog a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dominik Brodowski [Wed, 14 Feb 2018 17:59:23 +0000 (18:59 +0100)]
x86/entry: Reduce the code footprint of the 'idtentry' macro
Play a little trick in the generic PUSH_AND_CLEAR_REGS macro
to insert the GP registers "above" the original return address.
This allows us to (re-)insert the macro in error_entry() and
paranoid_entry() and to remove it from the idtentry macro. This
reduces the static footprint significantly:
text data bss dec hex filename
24307 0 0 24307 5ef3 entry_64.o-orig
20987 0 0 20987 51fb entry_64.o
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180214175924.23065-2-linux@dominikbrodowski.net
[ Small tweaks to comments. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Borislav Petkov [Fri, 16 Feb 2018 11:26:40 +0000 (12:26 +0100)]
x86/CPU: Check CPU feature bits after microcode upgrade
With some microcode upgrades, new CPUID features can become visible on
the CPU. Check what the kernel has mirrored now and issue a warning
hinting at possible things the user/admin can do to make use of the
newly visible features.
Originally-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180216112640.11554-4-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Borislav Petkov [Fri, 16 Feb 2018 11:26:39 +0000 (12:26 +0100)]
x86/CPU: Add a microcode loader callback
Add a callback function which the microcode loader calls when microcode
has been updated to a newer revision. Do the callback only when no error
was encountered during loading.
Tested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180216112640.11554-3-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Borislav Petkov [Fri, 16 Feb 2018 11:26:38 +0000 (12:26 +0100)]
x86/microcode: Propagate return value from updating functions
... so that callers can know when microcode was updated and act
accordingly.
Tested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180216112640.11554-2-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dan Williams [Fri, 16 Feb 2018 21:20:54 +0000 (13:20 -0800)]
nospec: Include <asm/barrier.h> dependency
The nospec.h header expects the per-architecture header file
<asm/barrier.h> to optionally define array_index_mask_nospec(). Include
that dependency to prevent inadvertent fallback to the default
array_index_mask_nospec() implementation.
The default implementation may not provide a full mitigation
on architectures that perform data value speculation.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/151881605404.17395.1341935530792574707.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rasmus Villemoes [Fri, 16 Feb 2018 21:20:48 +0000 (13:20 -0800)]
nospec: Allow index argument to have const-qualified type
The last expression in a statement expression need not be a bare
variable, quoting gcc docs
The last thing in the compound statement should be an expression
followed by a semicolon; the value of this subexpression serves as the
value of the entire construct.
and we already use that in e.g. the min/max macros which end with a
ternary expression.
This way, we can allow index to have const-qualified type, which will in
some cases avoid the need for introducing a local copy of index of
non-const qualified type. That, in turn, can prevent readers not
familiar with the internals of array_index_nospec from wondering about
the seemingly redundant extra variable, and I think that's worthwhile
considering how confusing the whole _nospec business is.
The expression _i&_mask has type unsigned long (since that is the type
of _mask, and the BUILD_BUG_ONs guarantee that _i will get promoted to
that), so in order not to change the type of the whole expression, add
a cast back to typeof(_i).
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/151881604837.17395.10812767547837568328.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dan Williams [Fri, 16 Feb 2018 21:20:42 +0000 (13:20 -0800)]
nospec: Kill array_index_nospec_mask_check()
There are multiple problems with the dynamic sanity checking in
array_index_nospec_mask_check():
* It causes unnecessary overhead in the 32-bit case since integer sized
@index values will no longer cause the check to be compiled away like
in the 64-bit case.
* In the 32-bit case it may trigger with user controllable input when
the expectation is that should only trigger during development of new
kernel enabling.
* The macro reuses the input parameter in multiple locations which is
broken if someone passes an expression like 'index++' to
array_index_nospec().
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/151881604278.17395.6605847763178076520.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Thu, 15 Feb 2018 01:02:15 +0000 (17:02 -0800)]
Merge branch 'x86-pti-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 PTI and Spectre related fixes and updates from Ingo Molnar:
"Here's the latest set of Spectre and PTI related fixes and updates:
Spectre:
- Add entry code register clearing to reduce the Spectre attack
surface
- Update the Spectre microcode blacklist
- Inline the KVM Spectre helpers to get close to v4.14 performance
again.
- Fix indirect_branch_prediction_barrier()
- Fix/improve Spectre related kernel messages
- Fix array_index_nospec_mask() asm constraint
- KVM: fix two MSR handling bugs
PTI:
- Fix a paranoid entry PTI CR3 handling bug
- Fix comments
objtool:
- Fix paranoid_entry() frame pointer warning
- Annotate WARN()-related UD2 as reachable
- Various fixes
- Add Add Peter Zijlstra as objtool co-maintainer
Misc:
- Various x86 entry code self-test fixes
- Improve/simplify entry code stack frame generation and handling
after recent heavy-handed PTI and Spectre changes. (There's two
more WIP improvements expected here.)
- Type fix for cache entries
There's also some low risk non-fix changes I've included in this
branch to reduce backporting conflicts:
- rename a confusing x86_cpu field name
- de-obfuscate the naming of single-TLB flushing primitives"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
x86/entry/64: Fix CR3 restore in paranoid_exit()
x86/cpu: Change type of x86_cache_size variable to unsigned int
x86/spectre: Fix an error message
x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping
selftests/x86/mpx: Fix incorrect bounds with old _sigfault
x86/mm: Rename flush_tlb_single() and flush_tlb_one() to __flush_tlb_one_[user|kernel]()
x86/speculation: Add <asm/msr-index.h> dependency
nospec: Move array_index_nospec() parameter checking into separate macro
x86/speculation: Fix up array_index_nospec_mask() asm constraint
x86/debug: Use UD2 for WARN()
x86/debug, objtool: Annotate WARN()-related UD2 as reachable
objtool: Fix segfault in ignore_unreachable_insn()
selftests/x86: Disable tests requiring 32-bit support on pure 64-bit systems
selftests/x86: Do not rely on "int $0x80" in single_step_syscall.c
selftests/x86: Do not rely on "int $0x80" in test_mremap_vdso.c
selftests/x86: Fix build bug caused by the 5lvl test which has been moved to the VM directory
selftests/x86/pkeys: Remove unused functions
selftests/x86: Clean up and document sscanf() usage
selftests/x86: Fix vDSO selftest segfault for vsyscall=none
x86/entry/64: Remove the unused 'icebp' macro
...
Ingo Molnar [Wed, 14 Feb 2018 07:39:11 +0000 (08:39 +0100)]
x86/entry/64: Fix CR3 restore in paranoid_exit()
Josh Poimboeuf noticed the following bug:
"The paranoid exit code only restores the saved CR3 when it switches back
to the user GS. However, even in the kernel GS case, it's possible that
it needs to restore a user CR3, if for example, the paranoid exception
occurred in the syscall exit path between SWITCH_TO_USER_CR3_STACK and
SWAPGS."
Josh also confirmed via targeted testing that it's possible to hit this bug.
Fix the bug by also restoring CR3 in the paranoid_exit_no_swapgs branch.
The reason we haven't seen this bug reported by users yet is probably because
"paranoid" entry points are limited to the following cases:
idtentry double_fault do_double_fault has_error_code=1 paranoid=2
idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
idtentry machine_check do_mce has_error_code=0 paranoid=1
Amongst those entry points only machine_check is one that will interrupt an
IRQS-off critical section asynchronously - and machine check events are rare.
The other main asynchronous entries are NMI entries, which can be very high-freq
with perf profiling, but they are special: they don't use the 'idtentry' macro but
are open coded and restore user CR3 unconditionally so don't have this bug.
Reported-and-tested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180214073910.boevmg65upbk3vqb@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Gustavo A. R. Silva [Tue, 13 Feb 2018 19:22:08 +0000 (13:22 -0600)]
x86/cpu: Change type of x86_cache_size variable to unsigned int
Currently, x86_cache_size is of type int, which makes no sense as we
will never have a valid cache size equal or less than 0. So instead of
initializing this variable to -1, it can perfectly be initialized to 0
and use it as an unsigned variable instead.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Addresses-Coverity-ID:
1464429
Link: http://lkml.kernel.org/r/20180213192208.GA26414@embeddedor.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dan Carpenter [Wed, 14 Feb 2018 07:14:17 +0000 (10:14 +0300)]
x86/spectre: Fix an error message
If i == ARRAY_SIZE(mitigation_options) then we accidentally print
garbage from one space beyond the end of the mitigation_options[] array.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-janitors@vger.kernel.org
Fixes: 9005c6834c0f ("x86/spectre: Simplify spectre_v2 command line parsing")
Link: http://lkml.kernel.org/r/20180214071416.GA26677@mwanda
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jia Zhang [Mon, 1 Jan 2018 01:52:10 +0000 (09:52 +0800)]
x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping
x86_mask is a confusing name which is hard to associate with the
processor's stepping.
Additionally, correct an indent issue in lib/cpu.c.
Signed-off-by: Jia Zhang <qianyue.zj@alibaba-inc.com>
[ Updated it to more recent kernels. ]
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rui Wang [Mon, 18 Dec 2017 08:34:10 +0000 (16:34 +0800)]
selftests/x86/mpx: Fix incorrect bounds with old _sigfault
For distributions with old userspace header files, the _sigfault
structure is different. mpx-mini-test fails with the following
error:
[root@Purley]# mpx-mini-test_64 tabletest
XSAVE is supported by HW & OS
XSAVE processor supported state mask: 0x2ff
XSAVE OS supported state mask: 0x2ff
BNDREGS: size: 64 user: 1 supervisor: 0 aligned: 0
BNDCSR: size: 64 user: 1 supervisor: 0 aligned: 0
starting mpx bounds table test
ERROR: siginfo bounds do not match shadow bounds for register 0
Fix it by using the correct offset of _lower/_upper in _sigfault.
RHEL needs this patch to work.
Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@linux.intel.com
Fixes: e754aedc26ef ("x86/mpx, selftests: Add MPX self test")
Link: http://lkml.kernel.org/r/1513586050-1641-1-git-send-email-rui.y.wang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Wed, 31 Jan 2018 16:03:10 +0000 (08:03 -0800)]
x86/mm: Rename flush_tlb_single() and flush_tlb_one() to __flush_tlb_one_[user|kernel]()
flush_tlb_single() and flush_tlb_one() sound almost identical, but
they really mean "flush one user translation" and "flush one kernel
translation". Rename them to flush_tlb_one_user() and
flush_tlb_one_kernel() to make the semantics more obvious.
[ I was looking at some PTI-related code, and the flush-one-address code
is unnecessarily hard to understand because the names of the helpers are
uninformative. This came up during PTI review, but no one got around to
doing it. ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux-MM <linux-mm@kvack.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/3303b02e3c3d049dc5235d5651e0ae6d29a34354.1517414378.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Tue, 13 Feb 2018 13:28:19 +0000 (14:28 +0100)]
x86/speculation: Add <asm/msr-index.h> dependency
Joe Konno reported a compile failure resulting from using an MSR
without inclusion of <asm/msr-index.h>, and while the current code builds
fine (by accident) this needs fixing for future patches.
Reported-by: Joe Konno <joe.konno@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arjan@linux.intel.com
Cc: bp@alien8.de
Cc: dan.j.williams@intel.com
Cc: dave.hansen@linux.intel.com
Cc: dwmw2@infradead.org
Cc: dwmw@amazon.co.uk
Cc: gregkh@linuxfoundation.org
Cc: hpa@zytor.com
Cc: jpoimboe@redhat.com
Cc: linux-tip-commits@vger.kernel.org
Cc: luto@kernel.org
Fixes: 20ffa1caecca ("x86/speculation: Add basic IBPB (Indirect Branch Prediction Barrier) support")
Link: http://lkml.kernel.org/r/20180213132819.GJ25201@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Will Deacon [Mon, 5 Feb 2018 14:16:06 +0000 (14:16 +0000)]
nospec: Move array_index_nospec() parameter checking into separate macro
For architectures providing their own implementation of
array_index_mask_nospec() in asm/barrier.h, attempting to use WARN_ONCE() to
complain about out-of-range parameters using WARN_ON() results in a mess
of mutually-dependent include files.
Rather than unpick the dependencies, simply have the core code in nospec.h
perform the checking for us.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1517840166-15399-1-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dan Williams [Wed, 7 Feb 2018 02:22:40 +0000 (18:22 -0800)]
x86/speculation: Fix up array_index_nospec_mask() asm constraint
Allow the compiler to handle @size as an immediate value or memory
directly rather than allocating a register.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/151797010204.1289.1510000292250184993.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Fri, 9 Feb 2018 12:16:59 +0000 (13:16 +0100)]
x86/debug: Use UD2 for WARN()
Since the Intel SDM added an ModR/M byte to UD0 and binutils followed
that specification, we now cannot disassemble our kernel anymore.
This now means Intel and AMD disagree on the encoding of UD0. And instead
of playing games with additional bytes that are valid ModR/M and single
byte instructions (0xd6 for instance), simply use UD2 for both WARN() and
BUG().
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180208194406.GD25181@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Thu, 8 Feb 2018 23:09:26 +0000 (17:09 -0600)]
x86/debug, objtool: Annotate WARN()-related UD2 as reachable
By default, objtool assumes that a UD2 is a dead end. This is mainly
because GCC 7+ sometimes inserts a UD2 when it detects a divide-by-zero
condition.
Now that WARN() is moving back to UD2, annotate the code after it as
reachable so objtool can follow the code flow.
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kbuild test robot <fengguang.wu@intel.com>
Link: http://lkml.kernel.org/r/0e483379275a42626ba8898117f918e1bf661e40.1518130694.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Thu, 8 Feb 2018 23:09:25 +0000 (17:09 -0600)]
objtool: Fix segfault in ignore_unreachable_insn()
Peter Zijlstra's patch for converting WARN() to use UD2 triggered a
bunch of false "unreachable instruction" warnings, which then triggered
a seg fault in ignore_unreachable_insn().
The seg fault happened when it tried to dereference a NULL 'insn->func'
pointer. Thanks to static_cpu_has(), some functions can jump to a
non-function area in the .altinstr_aux section. That breaks
ignore_unreachable_insn()'s assumption that it's always inside the
original function.
Make sure ignore_unreachable_insn() only follows jumps within the
current function.
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kbuild test robot <fengguang.wu@intel.com>
Link: http://lkml.kernel.org/r/bace77a60d5af9b45eddb8f8fb9c776c8de657ef.1518130694.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dominik Brodowski [Tue, 13 Feb 2018 08:15:19 +0000 (09:15 +0100)]
selftests/x86: Disable tests requiring 32-bit support on pure 64-bit systems
The ldt_gdt and ptrace_syscall selftests, even in their 64-bit variant, use
hard-coded 32-bit syscall numbers and call "int $0x80".
This will fail on 64-bit systems with CONFIG_IA32_EMULATION=y disabled.
Therefore, do not build these tests if we cannot build 32-bit binaries
(which should be a good approximation for CONFIG_IA32_EMULATION=y being enabled).
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kselftest@vger.kernel.org
Cc: shuah@kernel.org
Link: http://lkml.kernel.org/r/20180211111013.16888-6-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dominik Brodowski [Tue, 13 Feb 2018 08:13:21 +0000 (09:13 +0100)]
selftests/x86: Do not rely on "int $0x80" in single_step_syscall.c
On 64-bit builds, we should not rely on "int $0x80" working (it only does if
CONFIG_IA32_EMULATION=y is enabled). To keep the "Set TF and check int80"
test running on 64-bit installs with CONFIG_IA32_EMULATION=y enabled, build
this test only if we can also build 32-bit binaries (which should be a
good approximation for that).
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kselftest@vger.kernel.org
Cc: shuah@kernel.org
Link: http://lkml.kernel.org/r/20180211111013.16888-5-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Wed, 14 Feb 2018 18:14:59 +0000 (10:14 -0800)]
Merge tag 'gfs2-4.16.rc1.fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Bob Peterson:
"Fix regressions in the gfs2 iomap for block_map implementation we
recently discovered in commit
3974320ca6"
* tag 'gfs2-4.16.rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fixes to "Implement iomap for block_map"
Linus Torvalds [Wed, 14 Feb 2018 18:06:41 +0000 (10:06 -0800)]
Merge tag 'powerpc-4.16-2' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A larger batch of fixes than we'd like. Roughly 1/3 fixes for new
code, 1/3 fixes for stable and 1/3 minor things.
There's four commits fixing bugs when using 16GB huge pages on hash,
caused by some of the preparatory changes for pkeys.
Two fixes for bugs in the enhanced IRQ soft masking for local_t, one
of which broke KVM in some circumstances.
Four fixes for Power9. The most bizarre being a bug where futexes
stopped working because a NULL pointer dereference didn't trap during
early boot (it aliased the kernel mapping). A fix for memory hotplug
when using the Radix MMU, and a fix for live migration of guests using
the Radix MMU.
Two fixes for hotplug on pseries machines. One where we weren't
correctly updating NUMA info when CPUs are added and removed. And the
other fixes crashes/hangs seen when doing memory hot remove during
boot, which is apparently a thing people do.
Finally a handful of build fixes for obscure configs and other minor
fixes.
Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Balbir Singh, Colin
Ian King, Daniel Henrique Barboza, Florian Weimer, Guenter Roeck,
Harish, Laurent Vivier, Madhavan Srinivasan, Mauricio Faria de
Oliveira, Nathan Fontenot, Nicholas Piggin, Sam Bobroff"
* tag 'powerpc-4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix to use ucontext_t instead of struct ucontext
powerpc/kdump: Fix powernv build break when KEXEC_CORE=n
powerpc/pseries: Fix build break for SPLPAR=n and CPU hotplug
powerpc/mm/hash64: Zero PGD pages on allocation
powerpc/mm/hash64: Store the slot information at the right offset for hugetlb
powerpc/mm/hash64: Allocate larger PMD table if hugetlb config is enabled
powerpc/mm: Fix crashes with 16G huge pages
powerpc/mm: Flush radix process translations when setting MMU type
powerpc/vas: Don't set uses_vas for kernel windows
powerpc/pseries: Enable RAS hotplug events later
powerpc/mm/radix: Split linear mapping on hot-unplug
powerpc/64s/radix: Boot-time NULL pointer protection using a guard-PID
ocxl: fix signed comparison with less than zero
powerpc/64s: Fix may_hard_irq_enable() for PMI soft masking
powerpc/64s: Fix MASKABLE_RELON_EXCEPTION_HV_OOL macro
powerpc/numa: Invalidate numa_cpu_lookup_table on cpu remove
Andreas Gruenbacher [Tue, 6 Feb 2018 14:20:55 +0000 (07:20 -0700)]
gfs2: Fixes to "Implement iomap for block_map"
It turns out that commit
3974320ca6 "Implement iomap for block_map"
introduced a few bugs that trigger occasional failures with xfstest
generic/476:
In gfs2_iomap_begin, we jump to do_alloc when we determine that we are
beyond the end of the allocated metadata (height > ip->i_height).
There, we can end up calling hole_size with a metapath that doesn't
match the current metadata tree, which doesn't make sense. After
untangling the code at do_alloc, fix this by checking if the block we
are looking for is within the range of allocated metadata.
In addition, add a BUG() in case gfs2_iomap_begin is accidentally called
for reading stuffed files: this is handled separately. Make sure we
don't truncate iomap->length for reads beyond the end of the file; in
that case, the entire range counts as a hole.
Finally, revert to taking a bitmap write lock when doing allocations.
It's unclear why that change didn't lead to any failures during testing.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Linus Torvalds [Tue, 13 Feb 2018 17:35:17 +0000 (09:35 -0800)]
Merge tag 'mips_4.16_2' of git://git./linux/kernel/git/jhogan/mips
Pull MIPS fix from James Hogan:
"A single change (and associated DT binding update) to allow the
address of the MIPS Cluster Power Controller (CPC) to be chosen by DT,
which allows SMP to work on generic MIPS kernels where the bootloader
hasn't configured the CPC address (i.e. the new Ranchu platform)"
* tag 'mips_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: CPC: Map registers using DT in mips_cpc_default_phys_base()
dt-bindings: Document mti,mips-cpc binding
Harish [Tue, 13 Feb 2018 06:32:55 +0000 (12:02 +0530)]
selftests/powerpc: Fix to use ucontext_t instead of struct ucontext
With glibc 2.26 'struct ucontext' is removed to improve POSIX
compliance, which breaks powerpc/alignment_handler selftest. Fix the
test by using ucontext_t. Tested on ppc, works with older glibc
versions as well.
Fixes the following:
alignment_handler.c: In function ‘sighandler’:
alignment_handler.c:68:5: error: dereferencing pointer to incomplete type ‘struct ucontext’
ucp->uc_mcontext.gp_regs[PT_NIP] += 4;
Signed-off-by: Harish <harish@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Guenter Roeck [Mon, 12 Feb 2018 22:34:07 +0000 (14:34 -0800)]
powerpc/kdump: Fix powernv build break when KEXEC_CORE=n
If KEXEC_CORE is not enabled, powernv builds fail as follows.
arch/powerpc/platforms/powernv/smp.c: In function 'pnv_smp_cpu_kill_self':
arch/powerpc/platforms/powernv/smp.c:236:4: error:
implicit declaration of function 'crash_ipi_callback'
Add dummy function calls, similar to kdump_in_progress(), to solve the
problem.
Fixes: 4145f358644b ("powernv/kdump: Fix cases where the kdump kernel can get HMI's")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Guenter Roeck [Mon, 12 Feb 2018 22:34:08 +0000 (14:34 -0800)]
powerpc/pseries: Fix build break for SPLPAR=n and CPU hotplug
Commit
e67e02a544e9 ("powerpc/pseries: Fix cpu hotplug crash with
memoryless nodes") adds an unconditional call to
find_and_online_cpu_nid(), which is only declared if CONFIG_PPC_SPLPAR
is enabled. This results in the following build error if this is not
the case.
arch/powerpc/platforms/pseries/hotplug-cpu.o: In function `dlpar_online_cpu':
arch/powerpc/platforms/pseries/hotplug-cpu.c:369:
undefined reference to `.find_and_online_cpu_nid'
Follow the guideline provided by similar functions and provide a dummy
function if CONFIG_PPC_SPLPAR is not enabled. This also moves the
external function declaration into an include file where it should be.
Fixes: e67e02a544e9 ("powerpc/pseries: Fix cpu hotplug crash with memoryless nodes")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[mpe: Change subject to emphasise the build fix]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
projects / platform / kernel / linux-rpi.git / log