Greg Kroah-Hartman [Fri, 1 Jun 2018 18:23:10 +0000 (20:23 +0200)]
staging: ncpfs: delete it
The ncpfs code moved into the staging tree back in November 2017 and no
one has complained or even noticed it was gone. Because of that, let's
just delete it.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 1 Jun 2018 08:59:48 +0000 (10:59 +0200)]
staging: lustre: delete the filesystem from the tree.
The Lustre filesystem has been in the kernel tree for over 5 years now.
While it has been an endless source of enjoyment for new kernel
developers learning how to do basic codingstyle cleanups, as well as an
semi-entertaining source of bewilderment from the vfs developers any
time they have looked into the codebase to try to figure out how to port
their latest api changes to this filesystem, it has not really moved
forward into the "this is in shape to get out of staging" despite many
half-completed attempts.
And getting code out of staging is the main goal of that portion of the
kernel tree. Code should not stagnate and it feels like having this
code in staging is only causing the development cycle of the filesystem
to take longer than it should. There is a whole separate out-of-tree
copy of this codebase where the developers work on it, and then random
changes are thrown over the wall at staging at some later point in time.
This dual-tree development model has never worked, and the state of this
codebase is proof of that.
So, let's just delete the whole mess. Now the lustre developers can go
off and work in their out-of-tree codebase and not have to worry about
providing valid changelog entries and breaking their patches up into
logical pieces. They can take the time they have spend doing those
types of housekeeping chores and get the codebase into a much better
shape, and it can be submitted for inclusion into the real part of the
kernel tree when ready.
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 1 Jun 2018 11:10:04 +0000 (13:10 +0200)]
staging: vc04_services: no need to save the log debufs dentries
The log entry dentries are only set, never referenced, so no need to
keep them around. Remove the pointer from struct
vchiq_debugfs_log_entry as it is not needed anymore and get rid of the
separate vchiq_debugfs_create_log_entries() function as it is only used
in one place.
Suggested-by: Eric Anholt <eric@anholt.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Keerthi Reddy <keerthigd4990@gmail.com>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 1 Jun 2018 11:10:03 +0000 (13:10 +0200)]
staging: vc04_services: vchiq_debugfs_log_entry can be a void *
There's no need to set this to be int * when it is only used as a void *.
This lets us remove the unneeded cast, and unneeded temporary variable
the one place it is referenced in the code.
Suggested-by: Eric Anholt <eric@anholt.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Keerthi Reddy <keerthigd4990@gmail.com>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 1 Jun 2018 11:10:02 +0000 (13:10 +0200)]
staging: vc04_services: remove struct vchiq_debugfs_info
This structure, and the one static variable that was declared with it,
were not being used for anything. The log_categories field was being
set, but never used again. So just remove it entirely as it is not
needed at all.
Suggested-by: Eric Anholt <eric@anholt.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Keerthi Reddy <keerthigd4990@gmail.com>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 1 Jun 2018 11:10:01 +0000 (13:10 +0200)]
staging: vc04_services: move client dbg directory into static variable
This does not need to be part of a wrapper function, or in a structure,
just properly reference it directly as a single variable.
The whole variable will be going away soon anyway, this is just a step
toward that direction.
Suggested-by: Eric Anholt <eric@anholt.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Keerthi Reddy <keerthigd4990@gmail.com>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 1 Jun 2018 11:10:00 +0000 (13:10 +0200)]
staging: vc04_services: remove odd vchiq_debugfs_top() wrapper
vchiq_debugfs_top() is only a wrapper around a pointer to a dentry, so
just use the dentry directly instead, making it a static variable
instead of part of a static structure.
This also removes the pointless BUG_ON() when checking that dentry as no
one should ever care if debugfs is working or not, and the kernel should
really not panic over something as trivial as that.
Suggested-by: Eric Anholt <eric@anholt.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Keerthi Reddy <keerthigd4990@gmail.com>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 1 Jun 2018 11:09:59 +0000 (13:09 +0200)]
staging: vc04_services: no need to check debugfs return values
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Clean up the vchiq_arm code by not caring about the value of debugfs
calls. This ends up removing a number of lines of code that are not
needed.
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Keerthi Reddy <keerthigd4990@gmail.com>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 1 Jun 2018 09:30:56 +0000 (11:30 +0200)]
staging: mt7621-gpio: reorder includes alphabetically
This commit reviews driver includes reordering them in
alphabetic order. This improves readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 1 Jun 2018 09:30:55 +0000 (11:30 +0200)]
staging: mt7621-gpio: change gc_map to don't use pointers
There is no special gain in using pointers for 'gc_map' inside
'mtk_data' structure. We know the number of banks which is fixed
to MTK_BANK_CNT and we can just statically allocate them without
using kernel allocators.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 1 Jun 2018 09:30:54 +0000 (11:30 +0200)]
staging: mt7621-gpio: use GPIOF_DIR_OUT and GPIOF_DIR_IN macros instead of custom values
There are macros in gpio kernel's headers to define direction
of a gpio. Use them instead of return custom '0' and '1' values.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 1 Jun 2018 09:30:53 +0000 (11:30 +0200)]
staging: mt7621-gpio: change 'to_mediatek_gpio' to make just a one line return
Function to_mediatek_gpio can directly return without declaring
anything else in its body improving readability. Also change
pointer '*' declaration to be with return type in the upper line.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 1 Jun 2018 09:30:52 +0000 (11:30 +0200)]
staging: mt7621-gpio: dt-bindings: update documentation for #interrupt-cells property
This commit update documentation for #interrupt-cells property in
the gpio node which has been changed from '1' to '2'.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 1 Jun 2018 09:30:51 +0000 (11:30 +0200)]
staging: mt7621-gpio: update #interrupt-cells for the gpio node
Most gpio chips have two cells for interrupts and this should be also.
Set this property in the device tree accordly fixing this up. In order
to make this working properly the xlate function for the irq_domain must
be updated to use the 'irq_domain_xlate_twocell' one in the driver.
One more minimal change is needed two refer gpio's interrupt-parent from
other nodes which is to add new 'gpio' label in the device tree.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 25 May 2018 16:54:53 +0000 (18:54 +0200)]
staging: mt7621-gpio: dt-bindings: complete documentation for the gpio
This commit reviews and complete documentation for gpio related stuff
in the mt7621 device. It should be complete now.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 25 May 2018 16:54:52 +0000 (18:54 +0200)]
staging: mt7621-dts: add missing properties to gpio node
In order to let other devices reference the GPIO interrupts
if necessary properties 'interrupt-controller' and
'#interrupt-cells' becomes necessary. Add both of them to
complete gpio device tree node.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 25 May 2018 16:54:51 +0000 (18:54 +0200)]
staging: mt7621-gpio: change lock place in irq mask and unmask functions
Functions mediatek_gpio_irq_umask mediatek_gpio_irq_unmask are
reading and modifying registers but only the write is being hold.
It should be a complete lock instead for those which are type of
"read-modify-write". This makes more sense.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 25 May 2018 16:54:50 +0000 (18:54 +0200)]
staging: mt7621-gpio: avoid locking in mediatek_gpio_get_direction
mediatek_gpio_get_direction function is holding across a simple read
which it seems to be not neccessary at all. Just remove this locking
cleaning code of this function a bit.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 25 May 2018 16:54:49 +0000 (18:54 +0200)]
staging: mt7621-gpio: fix masks for gpio pin
BIT macro is being used to get mask for gpio's pin
which is retrieved using 'hwirq' from struct irq_data.
The problem here is that 'hwirq' can be as large as 95,
and 1UL << 95 is unlikely to work well. Instead of using
BIT macro use a new PIN_MASK macro which takes into account
pin and WIDTH of the bank in order to make a proper mask for
the gpio pin. Also 'd->hwirq' has been replaced by 'pin' in
some places because there was a 'pin' variable in changed
functions with the proper value. This improves readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 25 May 2018 16:54:48 +0000 (18:54 +0200)]
staging: mt7621-gpio: use module_platform_driver() instead subsys initcall
The driver's init function don't do anything besides registering the platform
driver, and the exit function which is not included in the driver should only
do driver unregister. Because of this module_platform_driver() macro could
just be used instead of having separate functions.
Currently the macro is not being used because the driver is initialized at
subsys init call level but this isn't necessary since platform devices are
defined in the DT as dependencies so there's no need for init calls order.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 25 May 2018 16:54:47 +0000 (18:54 +0200)]
staging: mt7621-gpio: rename MTK_MAX_BANK into MTK_BANK_CNT
There are 3 banks of gpios numbered '0' and '1' and '2'. So
the maximum bank number is "2". "3" is the count of banks.
In order to make the code looks and be correct on checking
max allowed gpio's id it makes sense to change the name of
this definition. Also there is another definitions which
start with the same prefix MKK_BANK_ of the new name so
having those with the same prefix makes all preprocessor
structure to be the same. This improves readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sankalp Negi [Wed, 30 May 2018 19:04:44 +0000 (00:34 +0530)]
staging: mt7621-mmc: Fix line size exceeding 80 columns
This patch fixes checkpatch.pl warning and check:
WARNING: line over 80 characters
CHECK: Alignment should match open parenthesis
Signed-off-by: Sankalp Negi <sankalpnegi2310@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sat, 26 May 2018 08:10:17 +0000 (09:10 +0100)]
staging: rtl8192e: Correct indentation of switch statements - coding style
Two switch statements had wrong indentation of 'case' options
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sat, 26 May 2018 08:10:16 +0000 (09:10 +0100)]
staging: rtl8192e: correct position of '{', '}', '(' and ')' - coding style
Correct the coding style of parenthesis and braces in various code blocks
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sat, 26 May 2018 08:10:15 +0000 (09:10 +0100)]
staging: rtl8192e: Add spaces where required by coding standard
There were numerous coding syle errors in this file where spaces were required
around operators.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 29 May 2018 14:29:47 +0000 (16:29 +0200)]
staging: lustre: get rid of ldebugfs_remove()
It was just a dumb wrapper around debugfs_remove_recursive() so just
call the function properly. Also, there is no need to set the dentry to
NULL, it's gone, who cares about it anymore...
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: NeilBrown <neilb@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Roman Storozhenko <romeusmeister@gmail.com>
Cc: Aastha Gupta <aastha.gupta4104@gmail.com>
Cc: Ben Evans <bevans@cray.com>
Cc: Quentin Bouget <quentin.bouget@cea.fr>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Arushi Singhal <arushisinghal19971997@gmail.com>
Cc: Patrick Farrell <paf@cray.com>
Cc: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Cc: Mathias Rav <mathiasrav@gmail.com>
Cc: Andriy Skulysh <andriy.skulysh@seagate.com>
Cc: Dafna Hirschfeld <dafna3@gmail.com>
Cc: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Cc: Bob Glosman <bob.glossman@intel.com>
Cc: lustre-devel@lists.lustre.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 29 May 2018 14:29:46 +0000 (16:29 +0200)]
staging: lustre: make ldebugfs_add_vars a void function
The call to ldebugfs_add_vars() can not really fail, so have it just
return nothing, which allows us to clean up a lot of unused error
handling code.
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: NeilBrown <neilb@suse.com>
Cc: Roman Storozhenko <romeusmeister@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Quentin Bouget <quentin.bouget@cea.fr>
Cc: Aastha Gupta <aastha.gupta4104@gmail.com>
Cc: Ben Evans <bevans@cray.com>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Arushi Singhal <arushisinghal19971997@gmail.com>
Cc: Frank Zago <fzago@cray.com>
Cc: Patrick Farrell <paf@cray.com>
Cc: Simo Koskinen <koskisoft@gmail.com>
Cc: Andriy Skulysh <andriy.skulysh@seagate.com>
Cc: "John L. Hammond" <john.hammond@intel.com>
Cc: Mathias Rav <mathiasrav@gmail.com>
Cc: Dafna Hirschfeld <dafna3@gmail.com>
Cc: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Cc: lustre-devel@lists.lustre.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 29 May 2018 14:29:45 +0000 (16:29 +0200)]
staging: lustre: remove last two users of ldebugfs_register()
ldebugfs_register() is just a call to debugfs_create_dir() and
ldebugfs_add_vars() if the list option is set. Fix up the last two
users of this function to just call these two functions instead, and
delete the now unused ldebugfs_register() call.
This ends up cleaning up more code and making things smaller, always a
good thing.
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: NeilBrown <neilb@suse.com>
Cc: Ben Evans <bevans@cray.com>
Cc: Quentin Bouget <quentin.bouget@cea.fr>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Arushi Singhal <arushisinghal19971997@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Mathias Rav <mathiasrav@gmail.com>
Cc: Dafna Hirschfeld <dafna3@gmail.com>
Cc: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Cc: Patrick Farrell <paf@cray.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: lustre-devel@lists.lustre.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 29 May 2018 14:29:44 +0000 (16:29 +0200)]
staging: lustre: unwrap some ldebugfs_register() calls
When the third option (list) to ldebugfs_register() is NULL, it's the
same as just calling debugfs_create_dir(). So unwind this and call
debugfs_create_dir() directly.
This ends up saving lots of code as we do not need to do any error
checking of the return value (because it does not matter).
The ldebugfs_register() call will be removed in a later patch when it is
fully removed, right now there are 2 outstanding users of it in the
tree.
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: NeilBrown <neilb@suse.com>
Cc: Aastha Gupta <aastha.gupta4104@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Quentin Bouget <quentin.bouget@cea.fr>
Cc: Patrick Farrell <paf@cray.com>
Cc: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Cc: "John L. Hammond" <john.hammond@intel.com>
Cc: Mathias Rav <mathiasrav@gmail.com>
Cc: Andriy Skulysh <andriy.skulysh@seagate.com>
Cc: Ben Evans <bevans@cray.com>
Cc: Bob Glosman <bob.glossman@intel.com>
Cc: lustre-devel@lists.lustre.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 29 May 2018 14:29:43 +0000 (16:29 +0200)]
staging: lustre: remove ldebugfs_obd_seq_create() wrapper function
It was just calling debugfs_create_file() so unwind things and just call
the real function instead. This ends up saving a number of lines as
there was never any error handling happening anyway, so that all can be
removed as well.
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Quentin Bouget <quentin.bouget@cea.fr>
Cc: Ben Evans <bevans@cray.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Arushi Singhal <arushisinghal19971997@gmail.com>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Dafna Hirschfeld <dafna3@gmail.com>
Cc: Mathias Rav <mathiasrav@gmail.com>
Cc: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Cc: Roman Storozhenko <romeusmeister@gmail.com>
Cc: lustre-devel@lists.lustre.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 29 May 2018 14:29:42 +0000 (16:29 +0200)]
staging: lustre: remove ldebugfs_seq_create() wrapper function
It was just calling debugfs_create_file() so unwind things and just call
the real function instead. This ends up saving a number of lines as
there was never any error handling happening anyway, so that all can be
removed as well.
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Quentin Bouget <quentin.bouget@cea.fr>
Cc: NeilBrown <neilb@suse.com>
Cc: Ben Evans <bevans@cray.com>
Cc: Arushi Singhal <arushisinghal19971997@gmail.com>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: "John L. Hammond" <john.hammond@intel.com>
Cc: Vitaly Fertman <vitaly.fertman@seagate.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Dafna Hirschfeld <dafna3@gmail.com>
Cc: Mathias Rav <mathiasrav@gmail.com>
Cc: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Cc: Bob Glosman <bob.glossman@intel.com>
Cc: lustre-devel@lists.lustre.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 29 May 2018 14:29:41 +0000 (16:29 +0200)]
staging: lustre: remove ldebugfs_register_stats() wrapper function
It was just calling debugfs_create_file() so unwind things and just call
the real function instead. This ends up saving a number of lines as
there was never any error handling happening anyway, so that all can be
removed as well.
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Ben Evans <bevans@cray.com>
Cc: Quentin Bouget <quentin.bouget@cea.fr>
Cc: NeilBrown <neilb@suse.com>
Cc: Arushi Singhal <arushisinghal19971997@gmail.com>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Patrick Farrell <paf@cray.com>
Cc: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Cc: Aastha Gupta <aastha.gupta4104@gmail.com>
Cc: Dafna Hirschfeld <dafna3@gmail.com>
Cc: Mathias Rav <mathiasrav@gmail.com>
Cc: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Cc: Bob Glosman <bob.glossman@intel.com>
Cc: lustre-devel@lists.lustre.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 29 May 2018 14:29:40 +0000 (16:29 +0200)]
staging: lustre: remove ldebugfs_add_simple() wrapper
It was only being called in one place, and is an unneeded wrapper
function around debugfs_create_file() so just call the real debugfs
function instead. This ends up cleaning up some unneeded error handling
logic that was never needed as well.
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Quentin Bouget <quentin.bouget@cea.fr>
Cc: Ben Evans <bevans@cray.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Arushi Singhal <arushisinghal19971997@gmail.com>
Cc: Dafna Hirschfeld <dafna3@gmail.com>
Cc: Mathias Rav <mathiasrav@gmail.com>
Cc: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Cc: lustre-devel@lists.lustre.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 29 May 2018 14:29:39 +0000 (16:29 +0200)]
staging: lustre: no need to check debugfs return values
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Clean up the lustre core code by not caring about the value of debugfs
calls. This ends up removing a number of lines of code that are not
needed.
Note, more work is needed to remove the unneeded debugfs wrapper
functions in the future.
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: NeilBrown <neilb@suse.com>
Cc: Ben Evans <bevans@cray.com>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: "John L. Hammond" <john.hammond@intel.com>
Cc: Dafna Hirschfeld <dafna3@gmail.com>
Cc: Mathias Rav <mathiasrav@gmail.com>
Cc: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Cc: lustre-devel@lists.lustre.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 29 May 2018 14:29:37 +0000 (16:29 +0200)]
staging: unisys: visornic: no need to check debugfs return values
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Clean up the visornic driver code by not caring about the value of
debugfs calls. This ends up removing a number of lines of code that are
not needed.
Cc: David Kershner <david.kershner@unisys.com>
Cc: Tim Sell <timothy.sell@unisys.com>
Cc: David Binder <david.binder@unisys.com>
Cc: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Cc: Charles Daniels <cdaniels@fastmail.com>
Cc: sparmaintainer@unisys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 29 May 2018 14:29:36 +0000 (16:29 +0200)]
staging: rtlwifi: don't check the return value of debugfs_create_file
We never did anything with the return value, and it does not matter if
the call succeeds or not (it's just debugging code), so don't even check
it.
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: "Frank A. Cancio Bello" <frank@generalsoftwareinc.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 29 May 2018 14:29:35 +0000 (16:29 +0200)]
staging: greybus: camera: no need to check debugfs return values
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Clean up the greybus camera driver by not caring about the value of
debugfs calls. This ends up removing a number of lines of code that
are not needed.
Cc: Alex Elder <elder@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: greybus-dev@lists.linaro.org
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Janani Sankara Babu [Tue, 29 May 2018 22:02:49 +0000 (18:02 -0400)]
Staging:rtl888eu:include Fix CamelCase issue
This patch is created to solve the CamelCase issue. The members 'IEs'
and 'IELength' of struct wlan_bssid_ex are being modified to 'ie' and
'ie_length' to solve the issue. And the places where these variables
are referenced inside rtl8188eu driver are also changed.
Signed-off-by: Janani Sankara Babu <jananis37@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 30 May 2018 21:38:48 +0000 (23:38 +0200)]
staging: lustre: include linux/highmem.h when needed
Something in recent linux-next kernels caused linux/highmem.h to
no longer be included implicitly from o2iblnd_cb.c, causing a build
failure:
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c: In function 'kiblnd_kvaddr_to_page':
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:549:15: error: 'PKMAP_BASE' undeclared (first use in this function); did you mean 'RTM_BASE'?
if (vaddr >= PKMAP_BASE &&
^~~~~~~~~~
RTM_BASE
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:549:15: note: each undeclared identifier is reported only once for each function it appears in
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:550:28: error: 'LAST_PKMAP' undeclared (first use in this function); did you mean 'AT_HWCAP'?
vaddr < (PKMAP_BASE + LAST_PKMAP * PAGE_SIZE)) {
^~~~~~~~~~
AT_HWCAP
This adds back an explicit include for the header.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhanusree Pola [Tue, 29 May 2018 18:09:32 +0000 (23:39 +0530)]
staging: comedi: comedi_usb.h: SPDX License Identifier is added in the first line
SPDX License Identifier is added in form of a comment.
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sankalp Negi [Sun, 27 May 2018 13:12:15 +0000 (18:42 +0530)]
staging: mt7621-pci: Fix line size exceeding 80 columns.
This patch fixes the checkpatch.pl warning:
WARNING: line over 80 characters
Signed-off-by: Sankalp Negi <sankalpnegi2310@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tiezhu Yang [Sat, 26 May 2018 14:46:22 +0000 (22:46 +0800)]
staging: rtlwifi: use single_open and single_release properly
single_open() returns -ENOMEM when malloc failed, so the caller function
rtl_debugfs_open_rw() should not always return 0. In addition, when using
single_open(), we should use single_release() instead of seq_release() in
the file_operations structure to avoid a memory leak.
Signed-off-by: Tiezhu Yang <kernelpatch@126.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Collier [Fri, 25 May 2018 17:40:40 +0000 (18:40 +0100)]
staging: wlan-ng: remove unused declarations from p80211types.h
A number of extern struct declarations in p80211types.h were causing
checkpatch warnings: "extern prototypes should be avoided in .h files"
and "function definition argument 'xxxxxx' should also have an
identifier name".
This appears to be a result of using a macro to form the declarations
and checkpatch consequently misinterpreting the declarations as
function prototypes.
On checking, the declarations have no corresponding definition in the
driver and are not used, so they are removed along with the macro used
to construct them, which is not needed elsewhere. After this change,
checkpatch reports that p80211types.h has no obvious issues.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Perepechko [Tue, 29 May 2018 14:21:44 +0000 (10:21 -0400)]
staging: lustre: mdc: excessive memory consumption by the xattr cache
The refill operation of the xattr cache does not know the
reply size in advance, so it makes a guess based on
the maxeasize value returned by the MDS.
In practice, it allocates 16 KiB for the common case and
4 MiB for the large xattr case. However, a typical reply
is just a few hundred bytes.
If we follow the conservative approach, we can prepare a
single memory page for the reply. It is large enough for
any reasonable xattr set and, at the same time, it does
not require multiple page memory reclaim, which can be
costly.
If, for a specific file, the reply is larger than a single
page, the client is prepared to handle that and will fall back
to non-cached xattr code. Indeed, if this happens often and
xattrs are often used to store large values, it makes sense to
disable the xattr cache at all since it wasn't designed for
such [mis]use.
Signed-off-by: Andrew Perepechko <c17827@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-9417
Reviewed-on: https://review.whamcloud.com/26887
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Ben Evans <bevans@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fan Yong [Tue, 29 May 2018 14:21:43 +0000 (10:21 -0400)]
staging: lustre: acl: increase ACL entries limitation
Originally, the limitation of ACL entries is 32, that is not
enough for some use cases. In fact, restricting ACL entries
count is mainly for preparing the RPC reply buffer to receive
the ACL data. So we cannot make the ACL entries count to be
unlimited. But we can enlarge the RPC reply buffer to hold
more ACL entries. On the other hand, MDT backend filesystem
has its own EA size limitation. For example, for ldiskfs case,
if large EA enable, then the max ACL size is 1048492 bytes;
otherwise, it is 4012 bytes. For ZFS backend, such value is
32768 bytes. With such hard limitation, we can calculate how
many ACL entries we can have at most. This patch increases
the RPC reply buffer to match such hard limitation. For old
client, to avoid buffer overflow because of large ACL data
(more than 32 ACL entries), the MDT will forbid the old client
to access the file with large ACL data. As for how to know
whether it is old client or new, a new connection flag
OBD_CONNECT_LARGE_ACL is used for that.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7473
Reviewed-on: https://review.whamcloud.com/19790
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Li Xi <lixi@ddn.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Tue, 29 May 2018 14:21:42 +0000 (10:21 -0400)]
staging: lustre: llite: remove unused parameters from md_{get, set}xattr()
md_getxattr() and md_setxattr() each have several unused
parameters. Remove them and improve the naming or remaining
parameters.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-10792
Reviewed-on: https://review.whamcloud.com/
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Tue, 29 May 2018 14:21:41 +0000 (10:21 -0400)]
staging: lustre: llite: add support set_acl method in inode operations
Linux kernel v3.14 adds set_acl method to inode operations.
This patch adds support to Lustre for proper acl management.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-9183
Reviewed-on: https://review.whamcloud.com/25965
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-10541
Reviewed-on: https://review.whamcloud.com/31588
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-10926
Reviewed-on: https://review.whamcloud.com/32045
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Tue, 29 May 2018 14:21:40 +0000 (10:21 -0400)]
staging: lustre: llite: create acl.c file
Move ll_get_acl() to its own file acl.c just like all the other
linux file systems do.
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 26 May 2018 09:34:25 +0000 (11:34 +0200)]
staging: lustre: fix more build errors in errno.c
And we need even more .h files to be included to build this file. So
add kernel.h and module.h, and hopefully that's enough...
Reported-by: kbuild test robot <lkp@intel.com>
Fixes:
0922c0084b91 ("staging: lustre: remove libcfs_all from ptlrpc")
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 26 May 2018 07:01:03 +0000 (09:01 +0200)]
staging: lustre: fix build error in errno.c
Turns out we need some more .h files to build properly on all arches.
Specifically errno.h for this file.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes:
0922c0084b91 ("staging: lustre: remove libcfs_all from ptlrpc")
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 26 May 2018 06:57:25 +0000 (08:57 +0200)]
staging: lustre: fix build error in mdc_request.c
Turns out we need some more .h files to build properly on all arches.
Specifically prefetch.h for this file.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes:
73d65c8d1a85 ("staging: lustre: remove libcfs_all.h from lustre/include/*.h")
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Sun, 20 May 2018 13:00:27 +0000 (15:00 +0200)]
staging: mt7621-gpio: update TODO file
update TODO file accordly to last changes.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Sun, 20 May 2018 13:00:26 +0000 (15:00 +0200)]
staging: mt7621-gpio: use MTK_BANK_WIDTH instead of magic number
There are some places where magic number '32' is being used to get
the gpio bank. There already exist a definition MTK_BANK_WIDTH
with this value, so just use it instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Sun, 20 May 2018 13:00:25 +0000 (15:00 +0200)]
staging: mt7621-gpio: use ternary operator in return in mediatek_gpio_get_direction
This commits replaces if statement and two returns in favour
of a only one return using a ternary operator.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Sun, 20 May 2018 13:00:24 +0000 (15:00 +0200)]
staging: mt7621-gpio: avoid devm_kzalloc() hidden inside declarations and refactor function a bit
Driver probe function includes an allocation using devm_kzalloc
which is "hidden" a bit inside the declarations. Extract this
to a better place to increase readability. Also because we are
allocating zeroed memory 'memset' statement is not needed at all.
Condition for checking for a valid gpio id is wrong and it should
be greater or equal instead of only greater so update to be the
good one.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Sun, 20 May 2018 13:00:23 +0000 (15:00 +0200)]
staging: mt7621-gpio: dt-bindings: add interrupt nodes to bindings doc
Interrupt related stuff for gpio controller in mt7621 was missing
in device tree documentation. Add it to complete documentation for
this driver.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Sun, 20 May 2018 13:00:22 +0000 (15:00 +0200)]
staging: mt7621-dts: add interrupt device tree nodes for the gpio controller
The GPIO controller of mt7621 can receive interrupts on any
of the GPIOs, either edge or level. It then interrupts the CPU using
GIC INT12. Update device tree accordly.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Sun, 20 May 2018 13:00:21 +0000 (15:00 +0200)]
staging: mt7621-gpio: avoid use of globals and use platform_data instead
Gpio driver have a some globals which can be avoided just
using platform_data in a proper form. This commit adds a new
struct mtk_data which includes all of those globals setting them
using platform_set_drvdata and devm_gpiochip_add_data functions.
With this properly set we are able to retrieve driver data along
the code using kernel api's so globals are not needed anymore.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Sun, 20 May 2018 13:00:20 +0000 (15:00 +0200)]
staging: mt7621-gpio: replace 'mtk' to use correct one 'mediatek'
Gpio driver is using mtk and there is already 'mediatek' binding
defined for this maker. Update driver to use it instead the custom
one 'mtk'.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Sun, 20 May 2018 13:00:19 +0000 (15:00 +0200)]
staging: mt7621-dts: update gpios related entries to use 'mediatek'
Gpio driver for mt7621 is using 'mtk' as binding but in the kernel
is already defined one for this maker which is 'mediatek'. Update
device tree to use the correct one.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Sun, 20 May 2018 13:00:18 +0000 (15:00 +0200)]
staging: mt7621-gpio: dt-bindings: add documentation for mt7621-gpio
This commit add missing dt bindings documentation for mt7621-gpio
driver. There is some missing stuff here about interrupts with is
not also being used in the mt7621.dtsi file. So just include in
staging a incomplete version before moving this to kernel's dt-bindings
place.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quytelda Kahja [Tue, 22 May 2018 07:26:37 +0000 (00:26 -0700)]
staging: rtl8723bs: Fix grammar error in comment.
Fix a grammatical error in the comment describing 'struct
rt_firmware_hdr'.
Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quytelda Kahja [Tue, 22 May 2018 07:26:36 +0000 (00:26 -0700)]
staging: rtl8723bs: Fix camel-case in 'struct rt_firmware_hdr'.
Replace camel-case member names with snake-case names per the linux
kernel coding style guidelines.
Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quytelda Kahja [Tue, 22 May 2018 07:26:35 +0000 (00:26 -0700)]
staging: rtl8723bs: Fix spelling/grammar errors in comment.
Fix the spelling/grammar errors in the comment block describing
the 'Function' member of 'struct rt_firmware_hdr'.
Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quytelda Kahja [Tue, 22 May 2018 07:26:34 +0000 (00:26 -0700)]
staging: rtl8723bs: Fix camel-case in 'struct rt_firmware'.
Change the members of 'struct rt_firmware' to be snake case instead
of camel-case, per the kernel coding style guide.
Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quytelda Kahja [Tue, 22 May 2018 07:26:33 +0000 (00:26 -0700)]
staging: rtl8723bs: Fix camel-case in IS_FW_HEADER_EXIST_8723B().
Change the parameter of the macro to the snake case 'fw_hdr' instead
of '_pFwHdr'.
Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quytelda Kahja [Tue, 22 May 2018 07:26:32 +0000 (00:26 -0700)]
staging: rtl8723bs: Clean up whitespace in 'rtl8723_hal.h'.
Make alignment and whitespace more consistent within the file
'rtl8723_hal.h' and with the kernel coding style guidelines.
Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quytelda Kahja [Tue, 22 May 2018 07:26:31 +0000 (00:26 -0700)]
staging: rtl8723bs: Rename 'Hal8723BPhyCfg.h' using snake case.
Camel-case is discouraged in the linux kernel coding style. Rename
this header file using snake case instead.
Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quytelda Kahja [Tue, 22 May 2018 07:26:30 +0000 (00:26 -0700)]
staging: rtl8723bs: Rename 'Hal8723bPhyReg.h' using snake case.
Camel-case is discouraged in the linux kernel coding style. Rename
this header using snake case instead.
Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quytelda Kahja [Tue, 22 May 2018 07:26:29 +0000 (00:26 -0700)]
staging: rtl8723bs: Rename 'Hal8723BPwrSeq.{c, h}' to 'hal_pwr_seq.*'.
Camel-case naming is discouraged int the linux kernel coding style.
Rename these files using snake case, and update the makefile to use
the new names.
Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Fri, 25 May 2018 15:37:12 +0000 (17:37 +0200)]
staging: fsl-dpaa2/rtc: fix PTP dependency
We can't select PTP_1588_CLOCK when posix timers are completely
disabled:
WARNING: unmet direct dependencies detected for PTP_1588_CLOCK
Depends on [n]: NET [=y] && POSIX_TIMERS [=n]
Selected by [y]:
- FSL_DPAA2_PTP_CLOCK [=y] && STAGING [=y] && FSL_DPAA2_ETH [=y]
This adds the necessary dependency.
Fixes:
9bdf43b3d40f ("staging: fsl-dpaa2/rtc: add rtc driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adham Abozaeid [Thu, 24 May 2018 00:02:14 +0000 (17:02 -0700)]
staging: wilc1000: Avoid overriding rates_no while parsing ies element.
Commit
d4b4aaba515a ("staging: wilc1000: fix line over 80 characters in
host_int_parse_join_bss_param()") introduced a bug by not keeping the
rates_no value while parsing ies elements.
It also increments auth_total_cnt as a pointer instead of its reference.
This commit fixes the bug by passing reference to rates_no to
host_int_parse_join_bss_param() and by incrementing reference of
auth_total_cnt
Fixes:
d4b4aaba515a (staging: wilc1000: fix line over 80 characters in host_int_parse_join_bss_param())
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Collier [Wed, 23 May 2018 07:30:25 +0000 (08:30 +0100)]
staging: wlan-ng: convert P80211SKB_RXMETA to inline function in p80211conv
To avoid possible issues with repeated reference to the macro argument
as reported by checkpatch, macro P80211SKB_RXMETA is replaced with an
equivalent inline function. The function is named p80211skb_rxmeta to
follow the coding style guidelines; references to the macro are
updated to reference the new function.
This change depends on the similar change for P80211SKB_FRMMETA having
been applied.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Collier [Wed, 23 May 2018 07:30:24 +0000 (08:30 +0100)]
staging: wlan-ng: convert P80211SKB_FRMMETA to inline function in p80211conv
To avoid possible issues with repeated reference to the macro argument
as reported by checkpatch, macro P80211SKB_FRMMETA is replaced with an
equivalent inline function. The function is named p80211skb_frmmeta to
follow the coding style guidelines; references to the macro are
updated to reference the new function.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Davide Spataro [Mon, 21 May 2018 20:48:57 +0000 (22:48 +0200)]
staging: rtl8192e: rtllib_tx: fix spelling issue.
Fix a spelling problem. Issue found by checkpatch.pl.
Signed-off-by: Davide Spataro <davide90.spataro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Tue, 22 May 2018 08:29:22 +0000 (09:29 +0100)]
staging: mt7621-mmc: fix spelling mistake: "Illgal" -> "Illegal"
Trivial fix to another spelling mistake in N_MSG message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Tue, 22 May 2018 08:33:42 +0000 (09:33 +0100)]
staging: greybus: fix spelling mistake: "Inavlid" -> "Invalid"
Trivial fix to spelling mistake in dev_err error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Tue, 22 May 2018 16:44:24 +0000 (17:44 +0100)]
staging: rtlwifi: fix spelling mistake: "Platfoem" -> "Platform"
Trivial fix to spelling mistake in ODM_RT_TRACE message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Tue, 22 May 2018 16:49:05 +0000 (17:49 +0100)]
staging: wilc1000: fix spelling mistake: "Preamle" -> "Preamble"
Trivial fix to spelling mistake in netdev_err error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Bornyakov [Tue, 22 May 2018 13:34:39 +0000 (16:34 +0300)]
staging: lustre: libcfs: add parens around macros args
One may call 'CFS_FAIL_TIMEOUT(id, secs + 5);' and get unexpected result
after macro substitution, viz., 'secs + 5' will turn into
'secs + 5 * 1000'
Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sabin Mihai Rapan [Mon, 21 May 2018 17:34:30 +0000 (19:34 +0200)]
staging: lustre: Fix block comments style
This patch fixes the checkpatch.pl warning:
WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line
Signed-off-by: Sabin Mihai Rapan <sabin.rapan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sabin Mihai Rapan [Mon, 21 May 2018 17:34:29 +0000 (19:34 +0200)]
staging: lustre: Fix "unsigned"->"unsigned int"
This patch fixes the checkpatch.pl warning:
WARNING:UNSPECIFIED_INT: Prefer 'unsigned int' to bare use of 'unsigned'
Signed-off-by: Sabin Mihai Rapan <sabin.rapan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sabin Mihai Rapan [Mon, 21 May 2018 17:34:28 +0000 (19:34 +0200)]
staging: lustre: Fix "Possible intergrate"->"Possibly integrate"
Trivial fix to spelling mistake in TODO file.
Signed-off-by: Sabin Mihai Rapan <sabin.rapan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sabin Mihai Rapan [Mon, 21 May 2018 17:34:27 +0000 (19:34 +0200)]
staging: lustre: Fix "from from"->"from"
Trivial fix to spelling mistake in README.txt
Signed-off-by: Sabin Mihai Rapan <sabin.rapan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Mon, 21 May 2018 04:35:13 +0000 (14:35 +1000)]
staging: lustre: remove libcfs_all.h
In the remaining files that include libcfs_all.h,
replace it with other include files as necessary,
then remove libcfs_all.h
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Mon, 21 May 2018 04:35:13 +0000 (14:35 +1000)]
staging: lustre: move all libcfs_all includes except in lustre/lnet/libcfs/
Again, most of these are not needed.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Mon, 21 May 2018 04:35:13 +0000 (14:35 +1000)]
staging: lustre: remove remaining libcfs_all.h includes from lustre/lustre
Most of these aren't needed, a few can be simplified.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Mon, 21 May 2018 04:35:13 +0000 (14:35 +1000)]
staging: lustre: remove libcfs_all.h from fid, fld, obdclass
None of these files seem to nee libcfs_all.h
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Mon, 21 May 2018 04:35:13 +0000 (14:35 +1000)]
staging: lustre: remove libcfs_all from ptlrpc
Some files didn't need it at all, others just needed
one or two includes.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Mon, 21 May 2018 04:35:13 +0000 (14:35 +1000)]
staging: lustre: remove libcfs_all.h from remaining .h files.
Now no *.h files include libcfs_all.h - only *.c files.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Mon, 21 May 2018 04:35:13 +0000 (14:35 +1000)]
staging: lustre: remove libcfs_all.h from lustre/include/*.h
Instead of the catch-all libcfs_all.h, just include the
files actually needed in different places.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Mon, 21 May 2018 04:35:13 +0000 (14:35 +1000)]
staging: lustre: remove libcfs_all.h from includes lustre/lnet
Some of these include files didn't need to
include libcfs_all.h. A couple did so replace with just the
base include files needed.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Mon, 21 May 2018 04:35:13 +0000 (14:35 +1000)]
staging: lustre: remove libcfs_all.h includes from lnet/klnd
Other smaller include files are sufficient.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Mon, 21 May 2018 04:35:13 +0000 (14:35 +1000)]
staging: lustre: don't include libcfs.h in lnet/lib-lnet.h
We want to be more focused in what is included where.
So we remove libcfs.h from where it isn't needed.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Mon, 21 May 2018 04:35:13 +0000 (14:35 +1000)]
staging: lustre: start moving includes out of libcfs.h
Lots of places include libcfs.h, and it includes lots of other include
files. Many of these aren't needed in many places. It is tidier and
better documentation to just include what is needed.
So remove all the includes from libcfs.h and create libcfs_all.h which
contains them. Then change every reference to libcfs.h to instead
include libcfs_all.h
Next several patches will remove that from various files
in small batches
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Mon, 21 May 2018 04:35:13 +0000 (14:35 +1000)]
staging: lustre: discard libcfs_prim.h
This file no longer contains enough content
to justify a separate file. So merge with
libcfs.h.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Mon, 21 May 2018 04:35:13 +0000 (14:35 +1000)]
staging: lustre: replace memory_presure funcitons by standard interfaces.
Use memalloc_noreclaim_save() and memalloc_noreclaim_restore(),
and for testing, just directly test the flag in current->flags
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Mon, 21 May 2018 04:35:13 +0000 (14:35 +1000)]
staging: lustre: move RESV_PORT definitions to lnet/lib-lnet.h
These are network related on only used in lnet, so move
to lib-lnet.h
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Mon, 21 May 2018 04:35:12 +0000 (14:35 +1000)]
staging: lustre: move lnet_debug_log_upcall declaration to tracefile.h
Both files that use this variable include tracefile.h, and it
seems a more suitable home for the declaration.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Mon, 21 May 2018 04:35:12 +0000 (14:35 +1000)]
staging: lustre: make lnet_debugfs_symlink_def local to libcfs/modules.c
This type is only used in libcfs/module.c, so make it local to there.
If any other module ever wanted to add its own symlinks,
it would probably be easiest to export lnet_debugfs_root
and just call debugfs_create_symlink as required.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>