mfd: cs5535: Don't build on UML

[ Upstream commit 5ec32a3e4053c1a726b45381d56aa9e39eaf3911 ]

The cs5535-mfd driver uses CPU-specific data that is not available
for ARCH=um builds, so don't allow it to be built for UML.

Prevents these build errors:

In file included from ../arch/x86/include/asm/olpc.h:7,
                 from ../drivers/mfd/cs5535-mfd.c:17:
../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’:
../arch/x86/include/asm/geode.h:16:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
   16 |         return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:16:46: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
   16 |         return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:17:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’
   17 |                 (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:18:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
   18 |                 (boot_cpu_data.x86_model == 5));
../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’:
../arch/x86/include/asm/geode.h:23:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
   23 |         return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:23:46: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
   23 |         return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:24:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’
   24 |                 (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:25:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
   25 |                 (boot_cpu_data.x86_model == 10));

Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221201012541.11809-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

objtool: add UACCESS exceptions for __tsan_volatile_read/write

[ Upstream commit d5d469247264e56960705dc5ae7e1d014861fe40 ]

A lot of the tsan helpers are already excempt from the UACCESS warnings,
but some more functions were added that need the same thing:

kernel/kcsan/core.o: warning: objtool: __tsan_volatile_read16+0x0: call to __tsan_unaligned_read16() with UACCESS enabled
kernel/kcsan/core.o: warning: objtool: __tsan_volatile_write16+0x0: call to __tsan_unaligned_write16() with UACCESS enabled
vmlinux.o: warning: objtool: __tsan_unaligned_volatile_read16+0x4: call to __tsan_unaligned_read16() with UACCESS enabled
vmlinux.o: warning: objtool: __tsan_unaligned_volatile_write16+0x4: call to __tsan_unaligned_write16() with UACCESS enabled

As Marco points out, these functions don't even call each other
explicitly but instead gcc (but not clang) notices the functions
being identical and turns one symbol into a direct branch to the
other.

Link: https://lkml.kernel.org/r/20230215130058.3836177-4-arnd@kernel.org
Fixes: 75d75b7a4d54 ("kcsan: Support distinguishing volatile accesses")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tests stat_all_metrics: Change true workload to sleep workload for system wide check

[ Upstream commit f9fa0778ee7349a9aa3d2ea10e9f2ab843a0b44e ]

Testcase stat_all_metrics.sh fails in powerpc:

98: perf all metrics test : FAILED!

Logs with verbose:

  [command]# ./perf test 98 -vv
   98: perf all metrics test                                           :
   --- start ---
  test child forked, pid 13262
  Testing BRU_STALL_CPI
  Testing COMPLETION_STALL_CPI
   ----
  Testing TOTAL_LOCAL_NODE_PUMPS_P23
  Metric 'TOTAL_LOCAL_NODE_PUMPS_P23' not printed in:
  Error:
  Invalid event (hv_24x7/PM_PB_LNS_PUMP23,chip=3/) in per-thread mode, enable system wide with '-a'.
  Testing TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01
  Metric 'TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01' not printed in:
  Error:
  Invalid event (hv_24x7/PM_PB_RTY_LNS_PUMP01,chip=3/) in per-thread mode, enable system wide with '-a'.
   ----

Based on above logs, we could see some of the hv-24x7 metric events
fails, and logs suggest to run the metric event with -a option.  This
change happened after the commit a4b8cfcabb1d90ec ("perf stat: Delay
metric parsing"), which delayed the metric parsing phase and now before
metric parsing phase perf tool identifies, whether target is system-wide
or not. With this change, perf_event_open will fails with workload
monitoring for uncore events as expected.

The perf all metric test case fails as some of the hv-24x7 metric events
may need bigger workload with system wide monitoring to get the data.
Fix this issue by changing current system wide check from true workload
to sleep 0.01 workload.

Result with the patch changes in powerpc:

  98: perf all metrics test : Ok

Fixes: a4b8cfcabb1d90ec ("perf stat: Delay metric parsing")
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230215093827.124921-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

printf: fix errname.c list

[ Upstream commit 0c2baf6509af1d11310ae4c1c839481a6e9a4bc4 ]

On most architectures, gcc -Wextra warns about the list of error
numbers containing both EDEADLK and EDEADLOCK:

lib/errname.c:15:67: warning: initialized field overwritten [-Woverride-init]
   15 | #define E(err) [err + BUILD_BUG_ON_ZERO(err <= 0 || err > 300)] = "-" #err
      |                                                                   ^~~
lib/errname.c:172:2: note: in expansion of macro 'E'
  172 |  E(EDEADLK), /* EDEADLOCK */
      |  ^

On parisc, a similar error happens with -ECANCELLED, which is an
alias for ECANCELED.

Make the EDEADLK printing conditional on the number being distinct
from EDEADLOCK, and remove the -ECANCELLED bit completely as it
can never be hit.

To ensure these are correct, add static_assert lines that verify
all the remaining aliases are in fact identical to the canonical
name.

Fixes: 57f5677e535b ("printf: add support for printing symbolic error names")
Cc: Petr Mladek <pmladek@suse.com>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/all/20210514213456.745039-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20210927123409.1109737-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230206194126.380350-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf record: Fix segfault with --overwrite and --max-size

[ Upstream commit 91621be65d6812cd74b2ea09573ff9ee0cbf5666 ]

When --overwrite and --max-size options of perf record are used
together, a segmentation fault occurs. The following is an example:

  # perf record -e sched:sched* --overwrite --max-size 1K -a -- sleep 1
  [ perf record: Woken up 1 times to write data ]
  perf: Segmentation fault
  Obtained 12 stack frames.
  ./perf/perf(+0x197673) [0x55f99710b673]
  /lib/x86_64-linux-gnu/libc.so.6(+0x3ef0f) [0x7fa45f3cff0f]
  ./perf/perf(+0x8eb40) [0x55f997002b40]
  ./perf/perf(+0x1f6882) [0x55f99716a882]
  ./perf/perf(+0x794c2) [0x55f996fed4c2]
  ./perf/perf(+0x7b7c7) [0x55f996fef7c7]
  ./perf/perf(+0x9074b) [0x55f99700474b]
  ./perf/perf(+0x12e23c) [0x55f9970a223c]
  ./perf/perf(+0x12e54a) [0x55f9970a254a]
  ./perf/perf(+0x7db60) [0x55f996ff1b60]
  /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe6) [0x7fa45f3b2c86]
  ./perf/perf(+0x7dfe9) [0x55f996ff1fe9]
  Segmentation fault (core dumped)

backtrace of the core file is as follows:

  (gdb) bt
  #0  record__bytes_written (rec=0x55f99755a200 <record>) at builtin-record.c:234
  #1  record__output_max_size_exceeded (rec=0x55f99755a200 <record>) at builtin-record.c:242
  #2  record__write (map=0x0, size=12816, bf=0x55f9978da2e0, rec=0x55f99755a200 <record>) at builtin-record.c:263
  #3  process_synthesized_event (tool=tool@entry=0x55f99755a200 <record>, event=event@entry=0x55f9978da2e0, sample=sample@entry=0x0, machine=machine@entry=0x55f997893658) at builtin-record.c:618
  #4  0x000055f99716a883 in __perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=0x55f9978928b0, machine=machine@entry=0x55f997893658,
      from=from@entry=0) at util/synthetic-events.c:1895
  #5  0x000055f99716a91f in perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=<optimized out>, machine=machine@entry=0x55f997893658)
      at util/synthetic-events.c:1905
  #6  0x000055f996fed4c3 in record__synthesize (tail=tail@entry=true, rec=0x55f99755a200 <record>) at builtin-record.c:1997
  #7  0x000055f996fef7c8 in __cmd_record (argc=argc@entry=2, argv=argv@entry=0x7ffc67551260, rec=0x55f99755a200 <record>) at builtin-record.c:2802
  #8  0x000055f99700474c in cmd_record (argc=<optimized out>, argv=0x7ffc67551260) at builtin-record.c:4258
  #9  0x000055f9970a223d in run_builtin (p=0x55f997564d88 <commands+264>, argc=10, argv=0x7ffc67551260) at perf.c:330
  #10 0x000055f9970a254b in handle_internal_command (argc=10, argv=0x7ffc67551260) at perf.c:384
  #11 0x000055f996ff1b61 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:428
  #12 main (argc=<optimized out>, argv=0x7ffc67551260) at perf.c:562

The reason is that record__bytes_written accesses the freed memory rec->thread_data,
The process is as follows:
  __cmd_record
    -> record__free_thread_data
      -> zfree(&rec->thread_data)         // free rec->thread_data
    -> record__synthesize
      -> perf_event__synthesize_id_index
        -> process_synthesized_event
          -> record__write
            -> record__bytes_written      // access rec->thread_data

We add a member variable "thread_bytes_written" in the struct "record"
to save the data size written by the threads.

Fixes: 6d57581659f72299 ("perf record: Add support for limit perf output file size")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/CAM9d7ci_TRrqBQVQNW8=GwakUr7SsZpYxaaty-S4bxF8zJWyqw@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: use printf instead of echo -ne

[ Upstream commit 9e34fad00fc889abbb99d751a4c22cf2bded10df ]

Rather than trying to guess which implementation of "echo" to run with
support for "-ne" options, use "printf" instead of "echo -ne".  It
handles escape characters as a standard feature and it is widespread
among modern shells.

Reported-by: "kernelci.org bot" <bot@kernelci.org>
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Fixes: 3297a4df805d ("kselftests: Enable the echo command to print newlines in Makefile")
Fixes: 79c16b1120fe ("selftests: find echo binary to use -ne options")
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/ftrace: Fix bash specific "==" operator

[ Upstream commit 1e6b485c922fbedf41d5a9f4e6449c5aeb923a32 ]

Since commit a1d6cd88c897 ("selftests/ftrace: event_triggers: wait
longer for test_event_enable") introduced bash specific "=="
comparation operator, that test will fail when we run it on a
posix-shell. `checkbashisms` warned it as below.

possible bashism in ftrace/func_event_triggers.tc line 45 (should be 'b = a'):
        if [ "$e" == $val ]; then

This replaces it with "=".

Fixes: a1d6cd88c897 ("selftests/ftrace: event_triggers: wait longer for test_event_enable")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: find echo binary to use -ne options

[ Upstream commit 4ebe33398c40c1118b4d8546978036c0e0032d1b ]

Find the actual echo binary using $(which echo) and use it for
formatted output with -ne.  On some systems, the default echo command
doesn't handle the -e option and the output looks like this (arm64
build):

-ne Emit Tests for alsa

-ne Emit Tests for amd-pstate

-ne Emit Tests for arm64

This is for example the case with the KernelCI Docker images
e.g. kernelci/gcc-10:x86-kselftest-kernelci.  With the actual echo
binary (e.g. in /bin/echo), the output is formatted as expected (x86
build this time):

Emit Tests for alsa
Emit Tests for amd-pstate
Skipping non-existent dir: arm64

Only the install target is using "echo -ne" so keep the $ECHO variable
local to it.

Reported-by: "kernelci.org bot" <bot@kernelci.org>
Fixes: 3297a4df805d ("kselftests: Enable the echo command to print newlines in Makefile")
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sparc: allow PM configs for sparc32 COMPILE_TEST

[ Upstream commit 7be6a87c2473957090995b7eb541e31d57a2c801 ]

When doing randconfig builds for sparc32 with COMPILE_TEST, some
(non-Sparc) drivers cause kconfig warnings with the Kconfig symbols PM,
PM_GENERIC_DOMAINS, or PM_GENERIC_DOMAINS_OF.

This is due to arch/sparc/Kconfig not using the PM Kconfig for
Sparc32:

  if SPARC64
  source "kernel/power/Kconfig"
  endif

Arnd suggested adding "|| COMPILE_TEST" to the conditional,
instead of trying to track down every driver that selects
any of these PM symbols.

Fixes the following kconfig warnings:

WARNING: unmet direct dependencies detected for PM
  Depends on [n]: SPARC64 [=n]
  Selected by [y]:
  - SUN20I_PPU [=y] && (ARCH_SUNXI || COMPILE_TEST [=y])

WARNING: unmet direct dependencies detected for PM
  Depends on [n]: SPARC64 [=n]
  Selected by [y]:
  - SUN20I_PPU [=y] && (ARCH_SUNXI || COMPILE_TEST [=y])

WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS
  Depends on [n]: SPARC64 [=n] && PM [=y]
  Selected by [y]:
  - QCOM_GDSC [=y] && COMMON_CLK [=y] && PM [=y]
  - SUN20I_PPU [=y] && (ARCH_SUNXI || COMPILE_TEST [=y])
  - MESON_GX_PM_DOMAINS [=y] && (ARCH_MESON || COMPILE_TEST [=y]) && PM [=y] && OF [=y]
  - BCM2835_POWER [=y] && (ARCH_BCM2835 || COMPILE_TEST [=y] && OF [=y]) && PM [=y]
  - BCM_PMB [=y] && (ARCH_BCMBCA || COMPILE_TEST [=y] && OF [=y]) && PM [=y]
  - ROCKCHIP_PM_DOMAINS [=y] && (ARCH_ROCKCHIP || COMPILE_TEST [=y]) && PM [=y]
  Selected by [m]:
  - ARM_SCPI_POWER_DOMAIN [=m] && (ARM_SCPI_PROTOCOL [=m] || COMPILE_TEST [=y] && OF [=y]) && PM [=y]
  - MESON_EE_PM_DOMAINS [=m] && (ARCH_MESON || COMPILE_TEST [=y]) && PM [=y] && OF [=y]
  - QCOM_AOSS_QMP [=m] && (ARCH_QCOM || COMPILE_TEST [=y]) && MAILBOX [=y] && COMMON_CLK [=y] && PM [=y]

WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS_OF
  Depends on [n]: SPARC64 [=n] && PM_GENERIC_DOMAINS [=y] && OF [=y]
  Selected by [y]:
  - MESON_GX_PM_DOMAINS [=y] && (ARCH_MESON || COMPILE_TEST [=y]) && PM [=y] && OF [=y]
  Selected by [m]:
  - MESON_EE_PM_DOMAINS [=m] && (ARCH_MESON || COMPILE_TEST [=y]) && PM [=y] && OF [=y]

Link: https://lkml.kernel.org/r/20230205004357.29459-1-rdunlap@infradead.org
Fixes: bdde6b3c8ba4 ("sparc64: Hibernation support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Fix auto-complete on aarch64

[ Upstream commit ffd1240e8f0814262ceb957dbe961f6e0aef1e7a ]

On aarch64 CPU related events are not under event_source/devices/cpu/events,
they're under event_source/devices/armv8_pmuv3_0/events on my machine.
Using current auto-complete script will generate below error:

  [root@localhost bin]# perf stat -e
  ls: cannot access '/sys/bus/event_source/devices/cpu/events': No such file or directory

Fix this by not testing /sys/bus/event_source/devices/cpu/events on
aarch64 machine.

Fixes: 74cd5815d9af6e6c ("perf tool: Improve bash command line auto-complete for multiple events with comma")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Cc: prime.zeng@hisilicon.com
Link: https://lore.kernel.org/r/20230207035057.43394-1-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test bpf: Skip test if kernel-debuginfo is not present

[ Upstream commit 34266f904abd45731bdade2e92d0536c092ee9bc ]

Perf BPF filter test fails in environment where "kernel-debuginfo"
is not installed.

Test failure logs:

  <<>>
  42: BPF filter                            :
  42.1: Basic BPF filtering                 : Ok
  42.2: BPF pinning                         : Ok
  42.3: BPF prologue generation             : FAILED!
  <<>>

Enabling verbose option provided debug logs, which says debuginfo
needs to be installed. Snippet of verbose logs:

  <<>>
  42.3: BPF prologue generation                                       :
  --- start ---
  test child forked, pid 28218
  <<>>
  Rebuild with CONFIG_DEBUG_INFO=y, or install an appropriate debuginfo
  package.
  bpf_probe: failed to convert perf probe events
  Failed to add events selected by BPF
  test child finished with -1
  ---- end ----
  BPF filter subtest 3: FAILED!
  <<>>

Here the subtest "BPF prologue generation" failed and logs shows
debuginfo is needed. After installing kernel-debuginfo package, testcase
passes.

The "BPF prologue generation" subtest failed because, the do_test()
returns TEST_FAIL without checking the error type returned by
parse_events_load_bpf_obj().

parse_events_load_bpf_obj() can also return error of type -ENODATA
incase kernel-debuginfo package is not installed. Fix this by adding
check for -ENODATA error.

Test result after the patch changes:

Test failure logs:

  <<>>
  42: BPF filter                 :
  42.1: Basic BPF filtering      : Ok
  42.2: BPF pinning              : Ok
  42.3: BPF prologue generation  : Skip (clang/debuginfo isn't installed or environment missing BPF support)
  <<>>

Fixes: ba1fae431e74bb42 ("perf test: Add 'perf test BPF'")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/linux-perf-users/Y7bIk77mdE4j8Jyi@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf intel-pt: Do not try to queue auxtrace data on pipe

[ Upstream commit aeb802f872a7c42e4381f36041e77d1745908255 ]

When it processes AUXTRACE_INFO, it calls to auxtrace_queue_data() to
collect AUXTRACE data first.  That won't work with pipe since it needs
lseek() to read the scattered aux data.

  $ perf record -o- -e intel_pt// true | perf report -i- --itrace=i100
  # To display the perf.data header info, please use --header/--header-only options.
  #
  0x4118 [0xa0]: failed to process type: 70
  Error:
  failed to process sample

For the pipe mode, it can handle the aux data as it gets.  But there's
no guarantee it can get the aux data in time.  So the following warning
will be shown at the beginning:

  WARNING: Intel PT with pipe mode is not recommended.
           The output cannot relied upon.  In particular,
           time stamps and the order of events may be incorrect.

Fixes: dbd134322e74f19d ("perf intel-pt: Add support for decoding AUX area samples")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230131023350.1903992-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf inject: Use perf_data__read() for auxtrace

[ Upstream commit 1746212daeba95e9ae1639227dc0c3591d41deeb ]

In copy_bytes(), it reads the data from the (input) fd and writes it to
the output file.  But it does with the read(2) unconditionally which
caused a problem of mixing buffered vs unbuffered I/O together.

You can see the problem when using pipes.

  $ perf record -e intel_pt// -o- true | perf inject -b > /dev/null
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.000 MB - ]
  0x45c0 [0x30]: failed to process type: 71

It should use perf_data__read() to honor the 'use_stdio' setting.

Fixes: 601366678c93618f ("perf data: Allow to use stdio functions for pipe mode")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230131023350.1903992-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/tracing/rtla: osnoise_hist: use total duration for average calculation

[ Upstream commit fe137a4fe0e77eb95396cfc5c3dd7df404421aa4 ]

Sampled durations must be weighted by observed quantity, to arrive at a correct
average duration value.

Perform calculation of total duration by summing (duration * count).

Link: https://lkml.kernel.org/r/20230103103400.275566-2-br015@umbiko.net
Fixes: 829a6c0b5698 ("rtla/osnoise: Add the hist mode")

Signed-off-by: Andreas Ziegler <br015@umbiko.net>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: simatic-ipc-leds-gpio: Make sure we have the GPIO providing driver

[ Upstream commit c64964ebee2a415384385205950ee7a05f78451e ]

If we register a "leds-gpio" platform device for GPIO pins that do not
exist we get a -EPROBE_DEFER and the probe will be tried again later.
If there is no driver to provide that pin we will poll forever and also
create a lot of log messages.

So check if that GPIO driver is configured, if so it will come up
eventually. If not, we exit our probe function early and do not even
bother registering the "leds-gpio". This method was chosen over "Kconfig
depends" since this way we can add support for more devices and GPIO
backends more easily without "depends":ing on all GPIO backends.

Fixes: a6c80bec3c93 ("leds: simatic-ipc-leds-gpio: Add GPIO version of Siemens driver")
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221007153323.1326-1-henning.schild@siemens.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: is31fl319x: Wrap mutex_destroy() for devm_add_action_or_rest()

[ Upstream commit a82c7cf803d98751cd3ddb35828faad925d71982 ]

Clang complains that devm_add_action() takes a parameter with a wrong type:

warning: cast from 'void (*)(struct mutex *)' to 'void (*)(void *)' converts to incompatible function type [-Wcast-function-type-strict]
    err = devm_add_action(dev, (void (*)(void *))mutex_destroy, &is31->lock);
                               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1 warning generated.

It appears that the commit e1af5c815586 ("leds: is31fl319x: Fix devm vs.
non-devm ordering") missed two things:

- whilst the commit mentions devm_add_action_or_reset() the actual change
  utilised devm_add_action() call by mistake
- strictly speaking the parameter is not compatible by type

Fix both issues by switching to devm_add_action_or_reset() and adding a
wrapper for mutex_destroy() call.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: e1af5c815586 ("leds: is31fl319x: Fix devm vs. non-devm ordering")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221228093238.82713-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: led-core: Fix refcount leak in of_led_get()

[ Upstream commit da1afe8e6099980fe1e2fd7436dca284af9d3f29 ]

class_find_device_by_of_node() calls class_find_device(), it will take
the reference, use the put_device() to drop the reference when not need
anymore.

Fixes: 699a8c7c4bd3 ("leds: Add of_led_get() and led_put()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221220121807.1543790-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf llvm: Fix inadvertent file creation

[ Upstream commit 9f19aab47ced012eddef1e2bc96007efc7713b61 ]

The LLVM template is first echo-ed into command_out and then
command_out executed. The echo surrounds the template with double
quotes, however, the template itself may contain quotes. This is
generally innocuous but in tools/perf/tests/bpf-script-test-prologue.c
we see:
...
SEC("func=null_lseek file->f_mode offset orig")
...
where the first double quote ends the double quote of the echo, then
the > redirects output into a file called f_mode.

To avoid this inadvertent behavior substitute redirects and similar
characters to be ASCII control codes, then substitute the output in
the echo back again.

Fixes: 5eab5a7ee032acaa ("perf llvm: Display eBPF compiling command in debug output")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: llvm@lists.linux.dev
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230105082609.344538-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: jdata writepage fix

[ Upstream commit cbb60951ce18c9b6e91d2eb97deb41d8ff616622 ]

The ->writepage() and ->writepages() operations are supposed to write
entire pages.  However, on filesystems with a block size smaller than
PAGE_SIZE, __gfs2_jdata_writepage() only adds the first block to the
current transaction instead of adding the entire page.  Fix that.

Fixes: 18ec7d5c3f43 ("[GFS2] Make journaled data files identical to normal files on disk")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: use tcon allocation functions even for dummy tcon

[ Upstream commit df57109bd50b9ed6911f3c2aa914189fe4c1fe2c ]

In smb2_reconnect_server, we allocate a dummy tcon for
calling reconnect for just the session. This should be
allocated using tconInfoAlloc, and not kmalloc.

Fixes: 3663c9045f51 ("cifs: check reconnects for channels of active tcons too")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Fix warning and UAF when destroy the MR list

[ Upstream commit 3e161c2791f8e661eed24a2c624087084d910215 ]

If the MR allocate failed, the MR recovery work not initialized
and list not cleared. Then will be warning and UAF when release
the MR:

  WARNING: CPU: 4 PID: 824 at kernel/workqueue.c:3066 __flush_work.isra.0+0xf7/0x110
  CPU: 4 PID: 824 Comm: mount.cifs Not tainted 6.1.0-rc5+ #82
  RIP: 0010:__flush_work.isra.0+0xf7/0x110
  Call Trace:
   <TASK>
   __cancel_work_timer+0x2ba/0x2e0
   smbd_destroy+0x4e1/0x990
   _smbd_get_connection+0x1cbd/0x2110
   smbd_get_connection+0x21/0x40
   cifs_get_tcp_session+0x8ef/0xda0
   mount_get_conns+0x60/0x750
   cifs_mount+0x103/0xd00
   cifs_smb3_do_mount+0x1dd/0xcb0
   smb3_get_tree+0x1d5/0x300
   vfs_get_tree+0x41/0xf0
   path_mount+0x9b3/0xdd0
   __x64_sys_mount+0x190/0x1d0
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

  BUG: KASAN: use-after-free in smbd_destroy+0x4fc/0x990
  Read of size 8 at addr ffff88810b156a08 by task mount.cifs/824
  CPU: 4 PID: 824 Comm: mount.cifs Tainted: G        W          6.1.0-rc5+ #82
  Call Trace:
   dump_stack_lvl+0x34/0x44
   print_report+0x171/0x472
   kasan_report+0xad/0x130
   smbd_destroy+0x4fc/0x990
   _smbd_get_connection+0x1cbd/0x2110
   smbd_get_connection+0x21/0x40
   cifs_get_tcp_session+0x8ef/0xda0
   mount_get_conns+0x60/0x750
   cifs_mount+0x103/0xd00
   cifs_smb3_do_mount+0x1dd/0xcb0
   smb3_get_tree+0x1d5/0x300
   vfs_get_tree+0x41/0xf0
   path_mount+0x9b3/0xdd0
   __x64_sys_mount+0x190/0x1d0
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

  Allocated by task 824:
   kasan_save_stack+0x1e/0x40
   kasan_set_track+0x21/0x30
   __kasan_kmalloc+0x7a/0x90
   _smbd_get_connection+0x1b6f/0x2110
   smbd_get_connection+0x21/0x40
   cifs_get_tcp_session+0x8ef/0xda0
   mount_get_conns+0x60/0x750
   cifs_mount+0x103/0xd00
   cifs_smb3_do_mount+0x1dd/0xcb0
   smb3_get_tree+0x1d5/0x300
   vfs_get_tree+0x41/0xf0
   path_mount+0x9b3/0xdd0
   __x64_sys_mount+0x190/0x1d0
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

  Freed by task 824:
   kasan_save_stack+0x1e/0x40
   kasan_set_track+0x21/0x30
   kasan_save_free_info+0x2a/0x40
   ____kasan_slab_free+0x143/0x1b0
   __kmem_cache_free+0xc8/0x330
   _smbd_get_connection+0x1c6a/0x2110
   smbd_get_connection+0x21/0x40
   cifs_get_tcp_session+0x8ef/0xda0
   mount_get_conns+0x60/0x750
   cifs_mount+0x103/0xd00
   cifs_smb3_do_mount+0x1dd/0xcb0
   smb3_get_tree+0x1d5/0x300
   vfs_get_tree+0x41/0xf0
   path_mount+0x9b3/0xdd0
   __x64_sys_mount+0x190/0x1d0
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

Let's initialize the MR recovery work before MR allocate to prevent
the warning, remove the MRs from the list to prevent the UAF.

Fixes: c7398583340a ("CIFS: SMBD: Implement RDMA memory registration")
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Fix lost destroy smbd connection when MR allocate failed

[ Upstream commit e9d3401d95d62a9531082cd2453ed42f2740e3fd ]

If the MR allocate failed, the smb direct connection info is NULL,
then smbd_destroy() will directly return, then the connection info
will be leaked.

Let's set the smb direct connection info to the server before call
smbd_destroy().

Fixes: c7398583340a ("CIFS: SMBD: Implement RDMA memory registration")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: copy the whole verifier in nfsd_copy_write_verifier

[ Upstream commit 90d2175572470ba7f55da8447c72ddd4942923c4 ]

Currently, we're only memcpy'ing the first __be32. Ensure we copy into
both words.

Fixes: 91d2e9b56cf5 ("NFSD: Clean up the nfsd_net::nfssvc_boot field")
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: don't fsync nfsd_files on last close

[ Upstream commit 4c475eee02375ade6e864f1db16976ba0d96a0a2 ]

Most of the time, NFSv4 clients issue a COMMIT before the final CLOSE of
an open stateid, so with NFSv4, the fsync in the nfsd_file_free path is
usually a no-op and doesn't block.

We have a customer running knfsd over very slow storage (XFS over Ceph
RBD). They were using the "async" export option because performance was
more important than data integrity for this application. That export
option turns NFSv4 COMMIT calls into no-ops. Due to the fsync in this
codepath however, their final CLOSE calls would still stall (since a
CLOSE effectively became a COMMIT).

I think this fsync is not strictly necessary. We only use that result to
reset the write verifier. Instead of fsync'ing all of the data when we
free an nfsd_file, we can just check for writeback errors when one is
acquired and when it is freed.

If the client never comes back, then it'll never see the error anyway
and there is no point in resetting it. If an error occurs after the
nfsd_file is removed from the cache but before the inode is evicted,
then it will reset the write verifier on the next nfsd_file_acquire,
(since there will be an unseen error).

The only exception here is if something else opens and fsyncs the file
during that window. Given that local applications work with this
limitation today, I don't see that as an issue.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=2166658
Fixes: ac3a2585f018 ("nfsd: rework refcounting in filecache")
Reported-and-tested-by: Pierguido Lambri <plambri@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: fix courtesy client with deny mode handling in nfs4_upgrade_open

[ Upstream commit dcd779dc46540e174a6ac8d52fbed23593407317 ]

The nested if statements here make no sense, as you can never reach
"else" branch in the nested statement. Fix the error handling for
when there is a courtesy client that holds a conflicting deny mode.

Fixes: 3d6942715180 ("NFSD: add support for share reservation conflict to courteous server")
Reported-by: 張智諺 <cc85nod@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: fix problems with cleanup on errors in nfsd4_copy

[ Upstream commit 81e722978ad21072470b73d8f6a50ad62c7d5b7d ]

When nfsd4_copy fails to allocate memory for async_copy->cp_src, or
nfs4_init_copy_state fails, it calls cleanup_async_copy to do the
cleanup for the async_copy which causes page fault since async_copy
is not yet initialized.

This patche rearranges the order of initializing the fields in
async_copy and adds checks in cleanup_async_copy to skip un-initialized
fields.

Fixes: ce0887ac96d3 ("NFSD add nfs4 inter ssc to nfsd4_copy")
Fixes: 87689df69491 ("NFSD: Shrink size of struct nfsd4_copy")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: clean up potential nfsd_file refcount leaks in COPY codepath

[ Upstream commit 6ba434cb1a8d403ea9aad1b667c3ea3ad8b3191f ]

There are two different flavors of the nfsd4_copy struct. One is
embedded in the compound and is used directly in synchronous copies. The
other is dynamically allocated, refcounted and tracked in the client
struture. For the embedded one, the cleanup just involves releasing any
nfsd_files held on its behalf. For the async one, the cleanup is a bit
more involved, and we need to dequeue it from lists, unhash it, etc.

There is at least one potential refcount leak in this code now. If the
kthread_create call fails, then both the src and dst nfsd_files in the
original nfsd4_copy object are leaked.

The cleanup in this codepath is also sort of weird. In the async copy
case, we'll have up to four nfsd_file references (src and dst for both
flavors of copy structure). They are both put at the end of
nfsd4_do_async_copy, even though the ones held on behalf of the embedded
one outlive that structure.

Change it so that we always clean up the nfsd_file refs held by the
embedded copy structure before nfsd4_copy returns. Rework
cleanup_async_copy to handle both inter and intra copies. Eliminate
nfsd4_cleanup_intra_ssc since it now becomes a no-op.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: 81e722978ad2 ("NFSD: fix problems with cleanup on errors in nfsd4_copy")
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: fix race to check ls_layouts

[ Upstream commit fb610c4dbc996415d57d7090957ecddd4fd64fb6 ]

Its possible for __break_lease to find the layout's lease before we've
added the layout to the owner's ls_layouts list.  In that case, setting
ls_recalled = true without actually recalling the layout will cause the
server to never send a recall callback.

Move the check for ls_layouts before setting ls_recalled.

Fixes: c5c707f96fc9 ("nfsd: implement pNFS layout recalls")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: fix leaked reference count of nfsd4_ssc_umount_item

[ Upstream commit 34e8f9ec4c9ac235f917747b23a200a5e0ec857b ]

The reference count of nfsd4_ssc_umount_item is not decremented
on error conditions. This prevents the laundromat from unmounting
the vfsmount of the source file.

This patch decrements the reference count of nfsd4_ssc_umount_item
on error.

Fixes: f4e44b393389 ("NFSD: delay unmount source's export after inter-server copy completed.")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: enhance inter-server copy cleanup

[ Upstream commit df24ac7a2e3a9d0bc68f1756a880e50bfe4b4522 ]

Currently nfsd4_setup_inter_ssc returns the vfsmount of the source
server's export when the mount completes. After the copy is done
nfsd4_cleanup_inter_ssc is called with the vfsmount of the source
server and it searches nfsd_ssc_mount_list for a matching entry
to do the clean up.

The problems with this approach are (1) the need to search the
nfsd_ssc_mount_list and (2) the code has to handle the case where
the matching entry is not found which looks ugly.

The enhancement is instead of nfsd4_setup_inter_ssc returning the
vfsmount, it returns the nfsd4_ssc_umount_item which has the
vfsmount embedded in it. When nfsd4_cleanup_inter_ssc is called
it's passed with the nfsd4_ssc_umount_item directly to do the
clean up so no searching is needed and there is no need to handle
the 'not found' case.

Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ cel: adjusted whitespace and variable/function names ]
Reviewed-by: Olga Kornievskaia <kolga@netapp.com>
Stable-dep-of: 34e8f9ec4c9a ("NFSD: fix leaked reference count of nfsd4_ssc_umount_item")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()

[ Upstream commit ddddedaa0db99481c5e5abe628ad54f65e8765bc ]

Other functions touching shmem->sgt take the pages lock, so do that here
too. drm_gem_shmem_get_pages() & co take the same lock, so move to the
_locked() variants to avoid recursive locking.

Discovered while auditing locking to write the Rust abstractions.

Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects")
Fixes: 4fa3d66f132b ("drm/shmem: Do dma_unmap_sg before purging pages")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230205125124.2260-1-lina@asahilina.net
(cherry picked from commit aa8c85affe3facd3842c8912186623415931cc72)
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks

[ Upstream commit 5beb5627a2481aade9aa630b7ebb7f99442321b6 ]

Commit 586bc4aab878 ("ALSA: hda/hdmi - fix vgaswitcheroo detection for
AMD") caused only AMD gpu's with PX to have their audio component register
with vga_switcheroo. This meant that Apple Macbooks with apple-gmux as the
gpu switcher no longer had the audio client registering, so when the gpu is
powered off by vga_switcheroo snd_hda_intel is unaware that it should have
suspended the device:

amdgpu: switched off
snd_hda_intel 0000:03:00.1:
    Unable to change power state from D3hot to D0, device inaccessible
snd_hda_intel 0000:03:00.1: CORB reset timeout#2, CORBRP = 65535

To resolve this, we use apple_gmux_detect() and register a
vga_switcheroo audio client when apple-gmux is detected.

Fixes: 586bc4aab878 ("ALSA: hda/hdmi - fix vgaswitcheroo detection for AMD")
Link: https://lore.kernel.org/all/20230210044826.9834-9-orlandoch.dev@gmail.com/
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Link: https://lore.kernel.org/r/20230216103450.12925-1-orlandoch.dev@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hid: bigben_probe(): validate report count

[ Upstream commit b94335f899542a0da5fafc38af8edcaf90195843 ]

bigben_probe() does not validate that the output report has the
needed report values in the first field.
A malicious device registering a report with one field and a single
value causes an head OOB write in bigben_worker() when
accessing report_field->value[1] to report_field->value[7].
Use hid_validate_values() which takes care of all the needed checks.

Fixes: 256a90ed9e46 ("HID: hid-bigbenff: driver for BigBen Interactive PS3OFMINIPAD gamepad")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230211-bigben-oob-v1-1-d2849688594c@diag.uniroma1.it
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: bigben: use spinlock to safely schedule workers

[ Upstream commit 76ca8da989c7d97a7f76c75d475fe95a584439d7 ]

Use spinlocks to deal with workers introducing a wrapper
bigben_schedule_work(), and several spinlock checks.
Otherwise, bigben_set_led() may schedule bigben->worker after the
structure has been freed, causing a use-after-free.

Fixes: 4eb1b01de5b9 ("HID: hid-bigbenff: fix race condition for scheduled work during removal")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230125-hid-unregister-leds-v4-3-7860c5763c38@diag.uniroma1.it
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: bigben_worker() remove unneeded check on report_field

[ Upstream commit 27d2a2fd844ec7da70d19fabb482304fd1e0595b ]

bigben_worker() checks report_field to be non-NULL.
The check has been added in commit
918aa1ef104d ("HID: bigbenff: prevent null pointer dereference")
to prevent a NULL pointer crash.
However, the true root cause was a missing check for output
reports, patched in commit
c7bf714f8755 ("HID: check empty report_list in bigben_probe()"),
where the type-confused report list_entry was overlapping with
a NULL pointer, which was then causing the crash.

Fixes: 918aa1ef104d ("HID: bigbenff: prevent null pointer dereference")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230125-hid-unregister-leds-v4-2-7860c5763c38@diag.uniroma1.it
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: bigben: use spinlock to protect concurrent accesses

[ Upstream commit 9fefb6201c4f8dd9f58c581b2a66e5cde2895ea2 ]

bigben driver has a worker that may access data concurrently.
Proct the accesses using a spinlock.

Fixes: 256a90ed9e46 ("HID: hid-bigbenff: driver for BigBen Interactive PS3OFMINIPAD gamepad")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230125-hid-unregister-leds-v4-1-7860c5763c38@diag.uniroma1.it
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared

[ Upstream commit fdff966bfde7cf0c85562d2bfb1ff1ba83da5f7b ]

Add struct snd_pcm_substream forward declaration

Fixes: 078a85f2806f ("ASoC: dapm: Only power up active channels from a DAI")
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230215132851.1626881-1-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: synquacer: Fix timeout handling in synquacer_spi_transfer_one()

[ Upstream commit e6a0b671880207566e1ece983bf989dde60bc1d7 ]

wait_for_completion_timeout() never returns a <0 value. It returns either
on timeout or a positive value (at least 1, or number of jiffies left
till timeout)

So, fix the error handling path and return -ETIMEDOUT should a timeout
occur.

Fixes: b0823ee35cf9 ("spi: Add spi driver for Socionext SynQuacer platform")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Link: https://lore.kernel.org/r/c2040bf3cfa201fd8890cfab14fa5a701ffeca14.1676466072.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: fix disabling of swap

[ Upstream commit 5bab56fff53ce161ed859d9559a10361d4f79578 ]

When swap is activated to a file on an NFSv4 mount we arrange that the
state manager thread is always present as starting a new thread requires
memory allocations that might block waiting for swap.

Unfortunately the code for allowing the state manager thread to exit when
swap is disabled was not tested properly and does not work.
This can be seen by examining /proc/fs/nfsfs/servers after disabling swap
and unmounting the filesystem.  The servers file will still list one
entry.  Also a "ps" listing will show the state manager thread is still
present.

There are two problems.
 1/ rpc_clnt_swap_deactivate() doesn't walk up the ->cl_parent list to
    find the primary client on which the state manager runs.

 2/ The thread is not woken up properly and it immediately goes back to
    sleep without checking whether it is really needed.  Using
    nfs4_schedule_state_manager() ensures a proper wake-up.

Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: 4dc73c679114 ("NFSv4: keep state manager thread active if swap is enabled")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfs4trace: fix state manager flag printing

[ Upstream commit b46d80bd2d6e7e063c625a20de54248afe8d4889 ]

__print_flags wants a mask, not the enum value.  Add two more flags.

Fixes: 511ba52e4c01 ("NFS4: Trace state recovery operation")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm: remove flush_scheduled_work() during local_exit()

[ Upstream commit 0b22ff5360f5c4e11050b89206370fdf7dc0a226 ]

Commit acfe0ad74d2e1 ("dm: allocate a special workqueue for deferred
device removal") switched from using system workqueue to a single
workqueue local to DM.  But it didn't eliminate the call to
flush_scheduled_work() that was introduced purely for the benefit of
deferred device removal with commit 2c140a246dc ("dm: allow remove to
be deferred").

Since DM core uses its own workqueue (and queue_work) there is no need
to call flush_scheduled_work() from local_exit().  local_exit()'s
destroy_workqueue(deferred_remove_workqueue) handles flushing work
started with queue_work().

Fixes: acfe0ad74d2e1 ("dm: allocate a special workqueue for deferred device removal")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: tlv320adcx140: fix 'ti,gpio-config' DT property init

[ Upstream commit 771725efe5e2e5396dd9d1220437e5f9d6b9ca9d ]

When the 'ti,gpio-config' property is not defined, the
device_property_count_u32() will return an error, rather than zero.

The current check, only handles a return value of zero, which assumes that
the property is defined and has nothing defined.

This change extends the check to also check for an error case (most likely
to be hit by the case that the 'ti,gpio-config' is not defined).

In case that the 'ti,gpio-config' and the returned 'gpio_count' is not
correct, there is a 'if (gpio_count != ADCX140_NUM_GPIO_CFGS)' check, a few
lines lower that will return -EINVAL.
This means that someone tried to define 'ti,gpio-config', but with the
wrong number of GPIOs.

Fixes: d5214321498a ("ASoC: tlv320adcx140: Add support for configuring GPIO pin")
Signed-off-by: Steffen Aschbacher <steffen.aschbacher@stihl.de>
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://lore.kernel.org/r/20230213073805.14640-1-alex@shruggie.ro
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (mlxreg-fan) Return zero speed for broken fan

[ Upstream commit a1ffd3c46267ee5c807acd780e15df9bb692223f ]

Currently for broken fan driver returns value calculated based on error
code (0xFF) in related fan speed register.
Thus, for such fan user gets fan{n}_fault to 1 and fan{n}_input with
misleading value.

Add check for fan fault prior return speed value and return zero if
fault is detected.

Fixes: 65afb4c8e7e4 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20230212145730.24247-1-vadimp@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: bcm63xx-hsspi: Fix multi-bit mode setting

[ Upstream commit 811ff802aaf878ebbbaeac0307a0164fa21e7d40 ]

Currently the driver always sets the controller to dual data bit mode
for both tx and rx data in the profile mode control register even for
single data bit transfer. Luckily the opcode is set correctly according
to SPI transfer data bit width so it does not actually cause issues.

This change fixes the problem by setting tx and rx data bit mode field
correctly according to the actual SPI transfer tx and rx data bit width.

Fixes: 142168eba9dc ("spi: bcm63xx-hsspi: add bcm63xx HSSPI driver")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20230209200246.141520-11-william.zhang@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech-hidpp: Hard-code HID++ 1.0 fast scroll support

[ Upstream commit 719acb4d3b7accc9cfbaf21c1c2d51dc7384aee2 ]

HID++ 1.0 devices only export whether Fast Scrolling is enabled, not
whether they are capable of it. Reinstate the original quirks for the 3
supported mice so fast scrolling works again on those devices.

Fixes: 908d325e1665 ("HID: logitech-hidpp: Detect hi-res scrolling support")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216903
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230116130937.391441-1-hadess@hadess.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: don't call dc_interrupt_set() for disabled crtcs

[ Upstream commit 4936458bf989d168f5a89015dd81067c4c2bdc64 ]

As made mention of in commit 4ea7fc09539b ("drm/amd/display: Do not
program interrupt status on disabled crtc"), we shouldn't program
disabled crtcs. So, filter out disabled crtcs in dm_set_vupdate_irq()
and dm_set_vblank().

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 589d2739332d ("drm/amd/display: Use crtc enable/disable_vblank hooks")
Fixes: d2574c33bb71 ("drm/amd/display: In VRR mode, do DRM core vblank handling at end of vblank. (v2)")
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: lpass: fix incorrect mclk rate

[ Upstream commit e7621434378c40b62ef858c14ae6415fb6469a8e ]

For some reason we ended up with incorrect mclk rate which should be
1920000 instead of 96000, So far we were getting lucky as the same clk
is set to 192000 by wsa and va macro. This issue is discovered when there
is no wsa macro active and only rx or tx path is tested.
Fix this by setting correct rate.

Fixes: c39667ddcfc5 ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Fixes: af3d54b99764 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: lpass: register mclk after runtime pm

[ Upstream commit 1dc3459009c33e335f0d62b84dd39a6bbd7fd5d2 ]

move mclk out registration after runtime pm is enabled so that the
clk framework can resume the codec if it requires to enable the mclk out.

Fixes: c96baa2949b2 ("ASoC: codecs: wsa-macro: add runtime pm support")
Fixes: 72ad25eabda0 ("ASoC: codecs: va-macro: add runtime pm support")
Fixes: 366ff79ed539 ("ASoC: codecs: rx-macro: add runtime pm support")
Fixes: 1fb83bc5cf64 ("ASoC: codecs: tx-macro: add runtime pm support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: q6apm-dai: Add SNDRV_PCM_INFO_BATCH flag

[ Upstream commit aa759f3f9f4394a3af65ad1772fca6cb9dd9e4cc ]

At the moment, playing audio with PulseAudio with the qdsp6 driver
results in distorted sound. It seems like its timer-based scheduling
does not work properly with qdsp6 since setting tsched=0 in
the PulseAudio configuration avoids the issue.

Apparently this happens when the pointer() callback is not accurate
enough. There is a SNDRV_PCM_INFO_BATCH flag that can be used to stop
PulseAudio from using timer-based scheduling by default.

According to https://www.alsa-project.org/pipermail/alsa-devel/2014-March/073816.html:

The flag is being used in the sense explained in the previous audio
meeting -- the data transfer granularity isn't fine enough but aligned
to the period size (or less).

q6apm-dai reports the position as multiple of

prtd->pcm_count = snd_pcm_lib_period_bytes(substream)

so it indeed just a multiple of the period size.

Therefore adding the flag here seems appropriate and makes audio
work out of the box.

Comment log inspired by Stephan Gerhold sent for q6asm-dai.c few years back.

Fixes: 9b4fe0f1cd79 ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: q6apm-dai: fix race condition while updating the position pointer

[ Upstream commit 84222ef54bfd8f043c23c8603fd5257a64b00780 ]

It is noticed that the position pointer value seems to get a get corrupted
due to missing locking between updating and reading.

Fix this by adding a spinlock around the position pointer.

Fixes: 9b4fe0f1cd79 ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: q6apm-lpass-dai: unprepare stream if its already prepared

[ Upstream commit c2ac3aec474da0455df79c4a182f19687bc98d1d ]

prepare callback can be called multiple times, so unprepare the stream
if its already prepared.

Without this DSP is not happy to setting the params on a already
prepared graph.

Fixes: 9b4fe0f1cd79 ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: retain initial quirks set up when creating HID devices

[ Upstream commit 03a86105556e23650e4470c09f91cf7c360d5e28 ]

In certain circumstances, such as when creating I2C-connected HID
devices, we want to pass and retain some quirks (axis inversion, etc).
The source of such quirks may be device tree, or DMI data, or something
else not readily available to the HID core itself and therefore cannot
be reconstructed easily. To allow this, introduce "initial_quirks" field
in hid_device structure and use it when determining the final set of
quirks.

This fixes the problem with i2c-hid setting up device-tree sourced
quirks too late and losing them on device rebind, and also allows to
sever the tie between hid-code and i2c-hid when applying DMI-based
quirks.

Fixes: b60d3c803d76 ("HID: i2c-hid-of: Expose the touchscreen-inverted properties")
Fixes: a2f416bf062a ("HID: multitouch: Add quirks for flipped axes")
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Tested-by: Allen Ballway <ballway@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/Y+LYwu3Zs13hdVDy@google.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: multitouch: Add quirks for flipped axes

[ Upstream commit a2f416bf062a38bb76cccd526d2d286b8e4db4d9 ]

Certain touchscreen devices, such as the ELAN9034, are oriented
incorrectly and report touches on opposite points on the X and Y axes.
For example, a 100x200 screen touched at (10,20) would report (90, 180)
and vice versa.

This is fixed by adding device quirks to transform the touch points
into the correct spaces, from X -> MAX(X) - X, and Y -> MAX(Y) - Y.

Signed-off-by: Allen Ballway <ballway@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stable-dep-of: 03a86105556e ("HID: retain initial quirks set up when creating HID devices")
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: aic94xx: Add missing check for dma_map_single()

[ Upstream commit 32fe45274edb5926abc0fac7263d9f889d02d9cf ]

Add check for dma_map_single() and return error if it fails in order to
avoid invalid DMA address.

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Link: https://lore.kernel.org/r/20230128110832.6792-1-jiasheng@iscas.ac.cn
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpt3sas: Fix a memory leak

[ Upstream commit 54dd96015e8d7a2a07359e2dfebf05b529d1780c ]

Add a forgotten kfree().

Fixes: dbec4c9040ed ("scsi: mpt3sas: lockless command submission")
Link: https://lore.kernel.org/r/20230207152159.18627-1-thenzl@redhat.com
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix enum odm_combine_mode mismatch

[ Upstream commit 087bad7eb1f6945f8232f132953ecc2bda8bd38d ]

A conversion from 'bool' to 'enum odm_combine_mode' was incomplete,
and gcc warns about this with many instances of

display/dc/dml/dcn20/display_mode_vba_20.c:3899:44: warning: implicit conversion from 'enum <anonymous>' to 'enum
odm_combine_mode' [-Wenum-conversion]
 3899 |     locals->ODMCombineEnablePerState[i][k] = false;

Change the ones that we get a warning for, using the same numerical
values to leave the behavior unchanged.

Fixes: 5fc11598166d ("drm/amd/display: expand dml structs")
Link: https://lore.kernel.org/all/20201026210039.3884312-3-arnd@kernel.org/
Link: https://lore.kernel.org/all/20210927100659.1431744-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Fix the control element identification for multiple codecs

[ Upstream commit d045bceff5a904bd79d71dede9f927c00ce4906f ]

Some motherboards have multiple HDA codecs connected to the serial bus.
The current code may create multiple mixer controls with the almost
identical identification.

The current code use id.device field from the control element structure
to store the codec address to avoid such clashes for multiple codecs.
Unfortunately, the user space do not handle this correctly. For mixer
controls, only name and index are used for the identifiers.

This patch fixes this problem to compose the index using the codec
address as an offset in case, when the control already exists. It is
really unlikely that one codec will create 10 similar controls.

This patch adds new kernel module parameter 'ctl_dev_id' to allow
select the old behaviour, too. The CONFIG_SND_HDA_CTL_DEV_ID Kconfig
option sets the default value.

BugLink: https://github.com/alsa-project/alsa-lib/issues/294
BugLink: https://github.com/alsa-project/alsa-lib/issues/205
Fixes: 54d174031576 ("[ALSA] hda-codec - Fix connection list parsing")
Fixes: 1afe206ab699 ("ALSA: hda - Try to find an empty control index when it's occupied")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230202092013.4066998-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (ltc2945) Handle error case in ltc2945_value_store

[ Upstream commit 178b01eccfb0b8149682f61388400bd3d903dddc ]

ltc2945_val_to_reg errors were not being handled
which would have resulted in register being set to
0 (clamped) instead of being left alone.

Fixes: 6700ce035f83 ("hwmon: Driver for Linear Technologies LTC2945")

Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (asus-ec-sensors) add missing mutex path

[ Upstream commit e2de0e6abd91b05411cb1f0953115dbbbe9b11ce ]

Add missing mutex path for ProArt X570-CREATOR WIFI.

Fixes: de8fbac5e59e (hwmon: (asus-ec-sensors) implement locking via the ACPI global lock)
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20230121111728.168514-2-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: tps65219: use generic set_bypass()

[ Upstream commit 0365df81145a4cfaae5f4da896160de512256e6d ]

Due to wrong interpretation of the specification,
custom implementation was used instead of standard regmap helper.
LINK: https://lore.kernel.org/all/c2014039-f1e8-6976-33d6-52e2dd4e7b66@baylibre.com/
Fixes: c12ac5fc3e0a ("regulator: drivers: Add TI TPS65219 PMIC regulators support")

Regulator does NOT require to be off to be switched to bypass mode.

Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Link: https://lore.kernel.org/r/20230203140119.13029-1-jneanne@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: dt-bindings: meson: fix gx-card codec node regex

[ Upstream commit 480b26226873c88e482575ceb0d0a38d76e1be57 ]

'codec' is a valid node name when there is a single codec
in the link. Fix the node regular expression to apply this.

Fixes: fd00366b8e41 ("ASoC: meson: gx: add sound card dt-binding documentation")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230202183653.486216-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mchp-spdifrx: Fix uninitialized use of mr in mchp_spdifrx_hw_params()

[ Upstream commit 218674a45930c700486d27b765bf2f1b43f8cbf7 ]

Clang warns:

  ../sound/soc/atmel/mchp-spdifrx.c:455:3: error: variable 'mr' is uninitialized when used here [-Werror,-Wuninitialized]
                  mr |= SPDIFRX_MR_ENDIAN_BIG;
                  ^~
  ../sound/soc/atmel/mchp-spdifrx.c:432:8: note: initialize the variable 'mr' to silence this warning
          u32 mr;
                ^
                 = 0
  1 error generated.

Zero initialize mr so that these bitwise OR and assignment operation
works unconditionally.

Fixes: fa09fa60385a ("ASoC: mchp-spdifrx: fix controls which rely on rsr register")
Link: https://github.com/ClangBuiltLinux/linux/issues/1797
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230202-mchp-spdifrx-fix-uninit-mr-v1-1-629a045d7a2f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rsnd: fixup #endif position

[ Upstream commit 49123b51cd896e00b256a27c2ce9e6bfe1bbc22f ]

commit 1f9c82b5ab83ff2 ("ASoC: rsnd: add debugfs support") added
CONFIG_DEBUG_FS related definitions on rsnd.h, but it should be
added inside of RSND_H. This patch fixup it.

Fixes: 1f9c82b5ab83 ("ASoC: rsnd: add debugfs support")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877cx26t7r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regmap: apply reg_base and reg_downshift for single register ops

[ Upstream commit 697c3892d825fb78f42ec8e53bed065dd728db3e ]

reg_base and reg_downshift currently don't have any effect if used with
a regmap_bus or regmap_config which only offers single register
operations (ie. reg_read, reg_write and optionally reg_update_bits).

Fix that and take them into account also for regmap_bus with only
reg_read and read_write operations by applying reg_base and
reg_downshift in _regmap_bus_reg_write, _regmap_bus_reg_read.

Also apply reg_base and reg_downshift in _regmap_update_bits, but only
in case the operation is carried out with a reg_update_bits call
defined in either regmap_bus or regmap_config.

Fixes: 0074f3f2b1e43d ("regmap: allow a defined reg_base to be added to every address")
Fixes: 86fc59ef818beb ("regmap: add configurable downshift for addresses")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/Y9clyVS3tQEHlUhA@makrotopia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm: improve shrinker debug names

[ Upstream commit c87791bcc455a91e51ca9800faaacc21c8d67785 ]

Commit e33c267ab70d ("mm: shrinkers: provide shrinkers with names")
chose some fairly bad names for DM's shrinkers.

Fixes: e33c267ab70d ("mm: shrinkers: provide shrinkers with names")
Signed-off-by : Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mchp-spdifrx: disable all interrupts in mchp_spdifrx_dai_remove()

[ Upstream commit aaecdc32b7e35b4f9b457fb3509414aa9a932589 ]

CSC interrupts which might be used in controls are on bits 8 and 9 of
SPDIFRX_IDR register. Thus disable all the interrupts that are exported
by driver.

Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-5-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mchp-spdifrx: fix controls that works with completion mechanism

[ Upstream commit d3681df44e856aab523a6eb7ba15b5e41efcbb1c ]

Channel status get and channel subcode get controls relies on data
returned by controls when certain IRQs are raised. To achieve that
completions are used b/w controls and interrupt service routine. The
concurrent accesses to these controls are protected by
struct snd_card::controls_rwsem.

Issues identified:
- reinit_completion() may be called while waiting for completion
  which should be avoided
- in case of multiple threads waiting, the complete() call in interrupt
  will signal only one waiting thread per interrupt which may lead to
  timeout for the others
- in case of channel status get as the CSC interrupt is not refcounted
  ISR may disable interrupt for threads that were just enabled it.

To solve these the access to controls were protected by a mutex. Along
with this there is no need for spinlock to protect the software cache
reads/updates b/w controls and ISR as the update is happening only when
requested from control, and only one reader can reach the control.

Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-4-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mchp-spdifrx: fix return value in case completion times out

[ Upstream commit a4c4161d6eae3ef5f486d1638ef452d9bc1376b0 ]

wait_for_completion_interruptible_timeout() returns 0 in case of
timeout. Check this into account when returning from function.

Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-3-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mchp-spdifrx: fix controls which rely on rsr register

[ Upstream commit fa09fa60385abbf99342494b280da8b4aebbc0e9 ]

The SPDIFRX block is clocked by 2 clocks: peripheral and generic clocks.
Peripheral clock feeds user interface (registers) and generic clock feeds
the receiver.

To enable the receiver the generic clock needs to be enabled and also the
ENABLE bit of MCHP_SPDIFRX_MR register need to be set.

The signal control exported by mchp-spdifrx driver reports wrong status
when the receiver is disabled. This can happen when requesting the signal
and the capture was not previously started. To solve this the receiver
needs to be enabled (by enabling generic clock and setting ENABLE bit of
MR register) before reading the signal status.

As with this fix there are 2 paths now that need to control the generic
clock and ENABLE bit of SPDIFRX_MR register (one path though controls, one
path though configuration) a mutex has been introduced. We can't rely on
subsystem locking as the controls are protected by
struct snd_card::controls_rwsem semaphore and configuration is protected
by a different lock (embedded in snd_pcm_stream_lock_irq()).

The introduction of mutex is also extended to other controls which rely on
SPDIFRX_RSR.ULOCK bit as it has been discovered experimentally that having
both clocks enabled but not the receiver (through ENABLE bit of SPDIFRX.MR)
leads to inconsistent values of SPDIFRX_RSR.ULOCK. Thus on some controls we
rely on software state (dev->trigger_enabled protected by mutex) to
retrieve proper values.

Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: dw_bt1: fix MUX_MMIO dependencies

[ Upstream commit d4bde04318c0d33705e9a77d4c7df72f262011e0 ]

Selecting a symbol with additional dependencies requires
adding the same dependency here:

WARNING: unmet direct dependencies detected for MUX_MMIO
  Depends on [n]: MULTIPLEXER [=y] && OF [=n]
  Selected by [y]:
  - SPI_DW_BT1 [=y] && SPI [=y] && SPI_MASTER [=y] && SPI_DESIGNWARE [=y] && (MIPS_BAIKAL_T1 || COMPILE_TEST [=y])

Drop the 'select' here to avoid the problem. Anyone using
the dw-bt1 SPI driver should make sure they include the
mux driver as well now.

Fixes: 7218838109fe ("spi: dw-bt1: Fix undefined devm_mux_control_get symbol")
Fixes: abf00907538e ("spi: dw: Add Baikal-T1 SPI Controller glue driver")
Link: https://lore.kernel.org/all/20221218192523.c6vnfo26ua6xqf26@mobilestation/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20230130140156.3620863-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: topology: Properly access value coming from topology file

[ Upstream commit c5d184c92df2b631fb81fe2ce6e96bfc5ba720e5 ]

When accessing values coming from topology, le32_to_cpu should be used.
One of recent commits missed that.

Fixes: 86e2d14b6d1a ("ASoC: topology: Add header payload_size verification")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230127231111.937721-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: vf610: connect GPIO label to dev name

[ Upstream commit 6f8ecb7f85f441eb7d78ba2a4df45ee8a821934e ]

Current GPIO label is fixed, so can't distinguish different GPIO
controllers through labels. Use dev name instead.

Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: display: mediatek: Fix the fallback for mediatek,mt8186-disp-ccorr

[ Upstream commit 137272ef1b0f17a1815fec00d583515a0163f85e ]

The mt8186-disp-ccorr is not fully compatible with the mt8183-disp-ccorr
implementation. It causes a crash when system resumes if it binds to the
device.

We should use mt8192-disp-ccorr as fallback of mt8186-disp-ccorr.

Fixes: 8a26ea19d4dc ("dt-bindings: display: mediatek: add MT8186 SoC binding")
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230118091829.755-10-allen-kh.cheng@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: soc-compress.c: fixup private_data on snd_soc_new_compress()

[ Upstream commit ffe4c0f0bfaa571a676a0e946d4a6a0607f94294 ]

commit d3268a40d4b19f ("ASoC: soc-compress.c: fix NULL dereference")
enables DPCM capture, but it should independent from playback.
This patch fixup it.

Fixes: d3268a40d4b1 ("ASoC: soc-compress.c: fix NULL dereference")
Link: https://lore.kernel.org/r/87tu0i6j7j.wl-kuninori.morimoto.gx@renesas.com
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qnkvo1s.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: Clean dangling pointer on bind error path

[ Upstream commit 36aa8c61af55675ed967900fbe5deb32d776f051 ]

mtk_drm_bind() can fail, in which case drm_dev_put() is called,
destroying the drm_device object. However a pointer to it was still
being held in the private object, and that pointer would be passed along
to DRM in mtk_drm_sys_prepare() if a suspend were triggered at that
point, resulting in a panic. Clean the pointer when destroying the
object in the error path to prevent this from happening.

Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20221122143949.3493104-1-nfraprado@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: mtk_drm_crtc: Add checks for devm_kcalloc

[ Upstream commit 5bf1e3bd7da625ccf9a22c8cb7d65271e6e47f4c ]

As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference.

Fixes: 31c5558dae05 ("drm/mediatek: Refactor plane init")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20221205095115.2905090-1-ruanjinjie@huawei.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: Drop unbalanced obj unref

[ Upstream commit 4deef811828e87e26a978d5d6433b261d4713849 ]

In the error path, mtk_drm_gem_object_mmap() is dropping an obj
reference that it doesn't own.

Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230119231255.2883365-1-robdclark@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: Use NULL instead of 0 for NULL pointer

[ Upstream commit 4744cde06f57dd6fbaac468663b1fe2f653eaa16 ]

Use NULL for NULL pointer to fix the following sparse warning:
drivers/gpu/drm/mediatek/mtk_drm_gem.c:265:27: sparse: warning: Using plain integer as NULL pointer

Fixes: 3df64d7b0a4f ("drm/mediatek: Implement gem prime vmap/vunmap function")
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230111024443.24559-1-miles.chen@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: dsi: Reduce the time of dsi from LP11 to sending cmd

[ Upstream commit 91aeaed2c1147e3b1157dc084d23f190856a6c23 ]

According to Figure 16 Turnaround Procedure on page 36 in [1], you
can see the status of LP-00 -> LP10 -> LP11. This state can correspond
to the state of DSI from LP00 -> LP11 in mtk_dsi_lane_ready function
in mtk_dsi.c.

LP-00 -> LP10 -> LP11 takes about 2*TLPX time (refer to [1] page 51
to see that TLPX is 50ns)

The delay at the end of the mtk_dsi_lane_ready function should be
greater than the 2*TLPX specified by the DSI spec, and less than
the time specified by the DSI_RX (generally 6ms to 40ms), to avoid
problems caused by the RX specification

[1]:mipi_D-PHY_specification_v1-1

Fixes: 39e8d062b03c ("drm/mediatek: Keep dsi as LP00 before dcs cmds transfer")
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/1673330093-6771-2-git-send-email-xinlei.lee@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: set pdpu->is_rt_pipe early in dpu_plane_sspp_atomic_update()

[ Upstream commit 1d233b1cb149ec78c20fac58331b27bb460f9558 ]

The function dpu_plane_sspp_atomic_update() updates pdpu->is_rt_pipe
flag, but after the commit 854f6f1c653b ("drm/msm/dpu: update the qos
remap only if the client type changes") it sets the flag late, after all
the qos functions have updated QoS programming. Move the flag update
back to the place where it happened before the mentioned commit to let
the pipe be programmed according to its current RT/non-RT state.

Fixes: 854f6f1c653b ("drm/msm/dpu: update the qos remap only if the client type changes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/516239/
Link: https://lore.kernel.org/r/20221229191856.3508092-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: renesas: rzg2l: Fix configuring the GPIO pins as interrupts

[ Upstream commit 00dfe29887761405ccd23cc0aa07cb86623bb2b7 ]

On the RZ/G2UL SoC we have less number of pins compared to RZ/G2L and also
the pin configs are completely different. This patch makes sure we use the
appropriate pin configs for each SoC (which is passed as part of the OF
data) while configuring the GPIO pin as interrupts instead of using
rzg2l_gpio_configs[] for all the SoCs.

Fixes: bfc69bdbaad1 ("pinctrl: renesas: rzg2l: Add RZ/G2UL support")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102221815.273719-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tegra: firewall: Check for is_addr_reg existence in IMM check

[ Upstream commit 1b5c09de25e8c08655c270a70e5e74e93b6bad1f ]

In the IMM opcode check, don't call is_addr_reg if it's not set.

Fixes: 8cc95f3fd35e ("drm/tegra: Add job firewall")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu: host1x: Don't skip assigning syncpoints to channels

[ Upstream commit eb258cc1fd458e584082be987dbc6ec42668c05e ]

The code to write the syncpoint channel assignment register
incorrectly skips the write if hypervisor registers are not available.

The register, however, is within the guest aperture so remove the
check and assign syncpoints properly even on virtualized systems.

Fixes: c3f52220f276 ("gpu: host1x: Enable Tegra186 syncpoint protection")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu: host1x: Fix mask for syncpoint increment register

[ Upstream commit 79aad29c7d2d2cd64790115d3a6ebac28c00a8ec ]

On Tegra186+, the syncpoint ID has 10 bits of space. To allow
using more than 256 syncpoints, fix the mask.

Fixes: 9abdd497cd0a ("gpu: host1x: Tegra234 device data and headers")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: mediatek: Initialize variable *buf to zero

[ Upstream commit 2e34f82ba214134ecf590fbe0cdbd87401645a8a ]

Coverity spotted that *buf is not initialized to zero in
mtk_pctrl_dbg_show. Using uninitialized variable *buf as argument to %s
when calling seq_printf. Fix this coverity by initializing *buf as zero.

Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118062036.26258-3-Guodong.Liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: mediatek: Initialize variable pullen and pullup to zero

[ Upstream commit a298c70a10c604a6b3df5a0aa56597b705ba0f6b ]

Coverity spotted that pullen and pullup is not initialized to zero in
mtk_pctrl_show_one_pin. The uninitialized variable pullen is used in
assignment statement "rsel = pullen;" in mtk_pctrl_show_one_pin, and
Uninitialized variable pullup is used when calling scnprintf. Fix this
coverity by initializing pullen and pullup as zero.

Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118062036.26258-2-Guodong.Liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: bcm2835: Remove of_node_put() in bcm2835_of_gpio_ranges_fallback()

[ Upstream commit 2d578dd27871372f7159dd3206149ec616700d87 ]

Remove wrong of_node_put() in bcm2835_of_gpio_ranges_fallback(),
there is no counterpart of_node_get() for it.

Fixes: d2b67744fd99 ("pinctrl: bcm2835: implement hook for missing gpio-ranges")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs: bugs fixes in timestamps buff alloc

[ Upstream commit 1693fef9e95dbe8ab767d208a02328fff13fbb94 ]

use argument instead of fixed GFP value for allocation
in Timestamps buffers alloc function.
change data type of size to size_t.

Fixes: 9158bf69e74f ("habanalabs: Timestamps buffers registration")
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/mdp5: Add check for kzalloc

[ Upstream commit 13fcfcb2a9a4787fe4e49841d728f6f2e9fa6911 ]

As kzalloc may fail and return NULL pointer,
it should be better to check the return value
in order to avoid the NULL pointer dereference.

Fixes: 1cff7440a86e ("drm/msm: Convert to using __drm_atomic_helper_crtc_reset() for reset.")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514154/
Link: https://lore.kernel.org/r/20221206074819.18134-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Add check for pstates

[ Upstream commit 93340e10b9c5fc86730d149636e0aa8b47bb5a34 ]

As kzalloc may fail and return NULL pointer,
it should be better to check pstates
in order to avoid the NULL pointer dereference.

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514160/
Link: https://lore.kernel.org/r/20221206080236.43687-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Add check for cstate

[ Upstream commit c96988b7d99327bb08bd9efd29a203b22cd88ace ]

As kzalloc may fail and return NULL pointer,
it should be better to check cstate
in order to avoid the NULL pointer dereference
in __drm_atomic_helper_crtc_reset.

Fixes: 1cff7440a86e ("drm/msm: Convert to using __drm_atomic_helper_crtc_reset() for reset.")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514163/
Link: https://lore.kernel.org/r/20221206080517.43786-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: use strscpy instead of strncpy

[ Upstream commit d7fd8634f48d76aa799ed57beb7d87dab91bde80 ]

Using strncpy can result in non-NULL-terminated destination string. Use
strscpy instead. This fixes following warning:

drivers/gpu/drm/msm/msm_fence.c: In function ‘msm_fence_context_alloc’:
drivers/gpu/drm/msm/msm_fence.c:25:9: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
   25 |         strncpy(fctx->name, name, sizeof(fctx->name));
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: f97decac5f4c ("drm/msm: Support multiple ringbuffers")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/518787/
Link: https://lore.kernel.org/r/20230118020152.1689213-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: sc7180: add missing WB2 clock control

[ Upstream commit 255f056181ac69278dcd8778f0be32a21b2d2a6a ]

Add missing DPU_CLK_CTRL_WB2 to sc7180_mdp clocks array.

Fixes: 51e4d60e6ba5 ("drm/msm/dpu: add writeback support for sc7180")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (sc7180)
Patchwork: https://patchwork.freedesktop.org/patch/518504/
Link: https://lore.kernel.org/r/20230116103055.780767-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096

[ Upstream commit 86bd0c4a2a5dc4265884648cb92c681646509692 ]

The Exynos UFS controller only supports scatter/gather list elements that
are aligned on a 4 KiB boundary. Fix DMA alignment in case PAGE_SIZE !=
4096. Rename UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE into
UFSHCD_QUIRK_4KB_DMA_ALIGNMENT.

Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Fixes: 2b2bfc8aa519 ("scsi: ufs: Introduce a quirk to allow only page-aligned sg entries")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: Allow 2 CTRLs on v2.5.0

[ Upstream commit 1ae654ded7c5a19dc13f57a4fe4434fef879b6f9 ]

v2.5.0 support was originally added for SC7280, but this hw is also
present on SM8350, which has one more DSI host. Bump up the dsi count
and fill in the register of the secondary host to allow it to probe.

This should not have any adverse effects on SC7280, as the secondary
CTRL will only be touched if it's defined, anyway.

Fixes: 65c391b31994 ("drm/msm/dsi: Add DSI support for SC7280")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/519513/
Link: https://lore.kernel.org/r/20230120210101.2146852-1-konrad.dybcio@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: exynos: dsi: Fix MIPI_DSI*_NO_* mode flags

[ Upstream commit 996e1defca34485dd2bd70b173f069aab5f21a65 ]

HFP/HBP/HSA/EOT_PACKET modes in Exynos DSI host specifies
0 = Enable and 1 = Disable.

The logic for checking these mode flags was correct before
the MIPI_DSI*_NO_* mode flag conversion.

This patch is trying to fix this MIPI_DSI*_NO_* mode flags handling
Exynos DSI host and update the mode_flags in relevant panel drivers.

Fixes: 0f3b68b66a6d ("drm/dsi: Add _NO_ to MIPI_DSI_* flags disabling features")
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reported-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221212145745.15387-1-jagan@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mipi-dsi: Fix byte order of 16-bit DCS set/get brightness

[ Upstream commit c9d27c6be518b4ef2966d9564654ef99292ea1b3 ]

The MIPI DCS specification demands that brightness values are sent in
big endian byte order. It also states that one parameter (i.e. one byte)
shall be sent/received for 8 bit wide values, and two parameters shall
be used for values that are between 9 and 16 bits wide.

Add new functions to properly handle 16-bit brightness in big endian,
since the two 8- and 16-bit cases are distinct from each other.

[richard: use separate functions instead of switch/case]
[richard: split into 16-bit component]

Fixes: 1a9d759331b8 ("drm/dsi: Implement DCS set/get display brightness")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: https://android.googlesource.com/kernel/msm/+/754affd62d0ee268c686c53169b1dbb7deac8550
[richard: fix 16-bit brightness_get]
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116224909.23884-2-mailingradian@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: tps65219: use IS_ERR() to detect an error pointer

[ Upstream commit 2bbba115c3c9a647bcb3201b014fcc3728fe75c8 ]

Fix pointer comparison to integer warning from gcc & sparse:

GCC:
../drivers/regulator/tps65219-regulator.c:370:26: warning: ordered comparison of pointer with integer zero [-Wextra]
  370 |                 if (rdev < 0) {
      |                          ^

sparse warning:
drivers/regulator/tps65219-regulator.c:370:26: sparse: error: incompatible types for operation (<):
drivers/regulator/tps65219-regulator.c:370:26: sparse:    struct regulator_dev *[assigned] rdev
drivers/regulator/tps65219-regulator.c:370:26: sparse:    int

Fixes: c12ac5fc3e0a ("regulator: drivers: Add TI TPS65219 PMIC regulators support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jerome Neanne <jneanne@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230114185736.2076-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: lt9611: pass a pointer to the of node

[ Upstream commit b0a7f8736789935f62d6df32d441cdf05a5c05d2 ]

Pass a pointer to the OF node while registering lt9611 MIPI device.

Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-7-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: lt9611: fix clock calculation

[ Upstream commit 2576eb26494eb0509dd9ceb0cd27771a7a5e3674 ]

Instead of having several fixed values for the pcr register, calculate
it before programming. This allows the bridge to support most of the
display modes.

Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-6-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>