review.tizen.org Git - platform/kernel/linux-rpi.git/log

gpio: mockup: Fix usage of new GPIO_LINE_DIRECTION

Restore the external behavior of gpio-mockup to what it was prior to the
change to using GPIO_LINE_DIRECTION.

Fixes: e42615ec233b ("gpio: Use new GPIO_LINE_DIRECTION")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

gpio: xtensa: fix driver build

Commit cad6fade6e78 ("xtensa: clean up WSR*/RSR*/get_sr/set_sr") removed
{RSR,WSR}_CPENABLE from xtensa code, but did not fix up all users,
breaking gpio-xtensa driver build. Update gpio-xtensa to use
new xtensa_{get,set}_sr API.

Cc: stable@vger.kernel.org # v5.0+
Fixes: cad6fade6e78 ("xtensa: clean up WSR*/RSR*/get_sr/set_sr")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Linux 5.5-rc1

Merge git://git./linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

1) More jumbo frame fixes in r8169, from Heiner Kallweit.

2) Fix bpf build in minimal configuration, from Alexei Starovoitov.

3) Use after free in slcan driver, from Jouni Hogander.

4) Flower classifier port ranges don't work properly in the HW offload
    case, from Yoshiki Komachi.

5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin.

6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk.

7) Fix flow dissection in dsa TX path, from Alexander Lobakin.

8) Stale syncookie timestampe fixes from Guillaume Nault.

[ Did an evil merge to silence a warning introduced by this pull - Linus ]

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
  r8169: fix rtl_hw_jumbo_disable for RTL8168evl
  net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()
  r8169: add missing RX enabling for WoL on RTL8125
  vhost/vsock: accept only packets with the right dst_cid
  net: phy: dp83867: fix hfs boot in rgmii mode
  net: ethernet: ti: cpsw: fix extra rx interrupt
  inet: protect against too small mtu values.
  gre: refetch erspan header from skb->data after pskb_may_pull()
  pppoe: remove redundant BUG_ON() check in pppoe_pernet
  tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()
  tcp: tighten acceptance of ACKs not matching a child socket
  tcp: fix rejected syncookies due to stale timestamps
  lpc_eth: kernel BUG on remove
  tcp: md5: fix potential overestimation of TCP option space
  net: sched: allow indirect blocks to bind to clsact in TC
  net: core: rename indirect block ingress cb function
  net-sysfs: Call dev_hold always in netdev_queue_add_kobject
  net: dsa: fix flow dissection on Tx path
  net/tls: Fix return values to avoid ENOTSUPP
  net: avoid an indirect call in ____sys_recvmsg()
  ...

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
"Eleven patches, all in drivers (no core changes) that are either minor
  cleanups or small fixes.

  They were late arriving, but still safe for -rc1"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry
  scsi: megaraid_sas: Make poll_aen_lock static
  scsi: sd_zbc: Improve report zones error printout
  scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI
  scsi: qla2xxx: unregister ports after GPN_FT failure
  scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan
  scsi: pm80xx: Remove unused include of linux/version.h
  scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3
  scsi: scsi_transport_sas: Fix memory leak when removing devices
  scsi: lpfc: size cpu map by last cpu id set
  scsi: ibmvscsi_tgt: Remove unneeded variable rc

Merge tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"Nine cifs/smb3 fixes:

   - one fix for stable (oops during oplock break)

   - two timestamp fixes including important one for updating mtime at
     close to avoid stale metadata caching issue on dirty files (also
     improves perf by using SMB2_CLOSE_FLAG_POSTQUERY_ATTRIB over the
     wire)

   - two fixes for "modefromsid" mount option for file create (now
     allows mode bits to be set more atomically and accurately on create
     by adding "sd_context" on create when modefromsid specified on
     mount)

   - two fixes for multichannel found in testing this week against
     different servers

   - two small cleanup patches"

* tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: improve check for when we send the security descriptor context on create
  smb3: fix mode passed in on create for modetosid mount option
  cifs: fix possible uninitialized access and race on iface_list
  cifs: Fix lookup of SMB connections on multichannel
  smb3: query attributes on file close
  smb3: remove unused flag passed into close functions
  cifs: remove redundant assignment to pointer pneg_ctxt
  fs: cifs: Fix atime update check vs mtime
  CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks

Merge branch 'work.misc' of git://git./linux/kernel/git/viro/vfs

Pull misc vfs cleanups from Al Viro:
"No common topic, just three cleanups".

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  make __d_alloc() static
  fs/namespace: add __user to open_tree and move_mount syscalls
  fs/fnctl: fix missing __user in fcntl_rw_hint()

Merge tag 'ntb-5.5' of git://github.com/jonmason/ntb

Pull NTB update from Jon Mason:
"Just a simple patch to add a new Hygon Device ID to the AMD NTB device
driver"

* tag 'ntb-5.5' of git://github.com/jonmason/ntb:
NTB: Add Hygon Device ID

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull more input updates from Dmitry Torokhov:

- fixups for Synaptics RMI4 driver

- a quirk for Goodinx touchscreen on Teclast tablet

- a new keycode definition for activating privacy screen feature found
   on a few "enterprise" laptops

- updates to snvs_pwrkey driver

- polling uinput device for writing (which is always allowed) now works

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers
  Input: synaptics-rmi4 - re-enable IRQs in f34v7_do_reflash
  Input: goodix - add upside-down quirk for Teclast X89 tablet
  Input: add privacy screen toggle keycode
  Input: uinput - fix returning EPOLLOUT from uinput_poll
  Input: snvs_pwrkey - remove gratuitous NULL initializers
  Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q

Merge tag 'iomap-5.5-merge-14' of git://git./fs/xfs/xfs-linux

Pull iomap fixes from Darrick Wong:
"Fix a race condition and a use-after-free error:

   - Fix a UAF when reporting writeback errors

   - Fix a race condition when handling page uptodate on fragmented file
     with blocksize < pagesize"

* tag 'iomap-5.5-merge-14' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: stop using ioend after it's been freed in iomap_finish_ioend()
  iomap: fix sub-page uptodate handling

Merge tag 'xfs-5.5-merge-17' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
"Fix a couple of resource management errors and a hang:

   - fix a crash in the log setup code when log mounting fails

   - fix a hang when allocating space on the realtime device

   - fix a block leak when freeing space on the realtime device"

* tag 'xfs-5.5-merge-17' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix mount failure crash on invalid iclog memory access
  xfs: don't check for AG deadlock for realtime files in bunmapi
  xfs: fix realtime file data space leak

Merge tag 'for-linus-5.5-ofs1' of git://git./linux/kernel/git/hubcap/linux

Pull orangefs update from Mike Marshall:
"orangefs: posix open permission checking...

  Orangefs has no open, and orangefs checks file permissions on each
  file access. Posix requires that file permissions be checked on open
  and nowhere else. Orangefs-through-the-kernel needs to seem posix
  compliant.

  The VFS opens files, even if the filesystem provides no method. We can
  see if a file was successfully opened for read and or for write by
  looking at file->f_mode.

  When writes are flowing from the page cache, file is no longer
  available. We can trust the VFS to have checked file->f_mode before
  writing to the page cache.

  The mode of a file might change between when it is opened and IO
  commences, or it might be created with an arbitrary mode.

  We'll make sure we don't hit EACCES during the IO stage by using
  UID 0"

[ This is "posixish", but not a great solution in the long run, since a
  proper secure network server shouldn't really trust the client like this.
  But proper and secure POSIX behavior requires an open method and a
  resulting cookie for IO of some kind, or similar.    - Linus ]

* tag 'for-linus-5.5-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: posix open permission checking...

Merge tag 'nfsd-5.5' of git://linux-nfs.org/~bfields/linux

Pull nfsd updates from Bruce Fields:
"This is a relatively quiet cycle for nfsd, mainly various bugfixes.

  Possibly most interesting is Trond's fixes for some callback races
  that were due to my incomplete understanding of rpc client shutdown.
  Unfortunately at the last minute I've started noticing a new
  intermittent failure to send callbacks. As the logic seems basically
  correct, I'm leaving Trond's patches in for now, and hope to find a
  fix in the next week so I don't have to revert those patches"

* tag 'nfsd-5.5' of git://linux-nfs.org/~bfields/linux: (24 commits)
  nfsd: depend on CRYPTO_MD5 for legacy client tracking
  NFSD fixing possible null pointer derefering in copy offload
  nfsd: check for EBUSY from vfs_rmdir/vfs_unink.
  nfsd: Ensure CLONE persists data and metadata changes to the target file
  SUNRPC: Fix backchannel latency metrics
  nfsd: restore NFSv3 ACL support
  nfsd: v4 support requires CRYPTO_SHA256
  nfsd: Fix cld_net->cn_tfm initialization
  lockd: remove __KERNEL__ ifdefs
  sunrpc: remove __KERNEL__ ifdefs
  race in exportfs_decode_fh()
  nfsd: Drop LIST_HEAD where the variable it declares is never used.
  nfsd: document callback_wq serialization of callback code
  nfsd: mark cb path down on unknown errors
  nfsd: Fix races between nfsd4_cb_release() and nfsd4_shutdown_callback()
  nfsd: minor 4.1 callback cleanup
  SUNRPC: Fix svcauth_gss_proxy_init()
  SUNRPC: Trace gssproxy upcall results
  sunrpc: fix crash when cache_head become valid before update
  nfsd: remove private bin2hex implementation
  ...

Merge tag 'nfs-for-5.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
"Highlights include:

  Features:

   - NFSv4.2 now supports cross device offloaded copy (i.e. offloaded
     copy of a file from one source server to a different target
     server).

   - New RDMA tracepoints for debugging congestion control and Local
     Invalidate WRs.

  Bugfixes and cleanups

   - Drop the NFSv4.1 session slot if nfs4_delegreturn_prepare waits for
     layoutreturn

   - Handle bad/dead sessions correctly in nfs41_sequence_process()

   - Various bugfixes to the delegation return operation.

   - Various bugfixes pertaining to delegations that have been revoked.

   - Cleanups to the NFS timespec code to avoid unnecessary conversions
     between timespec and timespec64.

   - Fix unstable RDMA connections after a reconnect

   - Close race between waking an RDMA sender and posting a receive

   - Wake pending RDMA tasks if connection fails

   - Fix MR list corruption, and clean up MR usage

   - Fix another RPCSEC_GSS issue with MIC buffer space"

* tag 'nfs-for-5.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits)
  SUNRPC: Capture completion of all RPC tasks
  SUNRPC: Fix another issue with MIC buffer space
  NFS4: Trace lock reclaims
  NFS4: Trace state recovery operation
  NFSv4.2 fix memory leak in nfs42_ssc_open
  NFSv4.2 fix kfree in __nfs42_copy_file_range
  NFS: remove duplicated include from nfs4file.c
  NFSv4: Make _nfs42_proc_copy_notify() static
  NFS: Fallocate should use the nfs4_fattr_bitmap
  NFS: Return -ETXTBSY when attempting to write to a swapfile
  fs: nfs: sysfs: Remove NULL check before kfree
  NFS: remove unneeded semicolon
  NFSv4: add declaration of current_stateid
  NFSv4.x: Drop the slot if nfs4_delegreturn_prepare waits for layoutreturn
  NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process()
  nfsv4: Move NFSPROC4_CLNT_COPY_NOTIFY to end of list
  SUNRPC: Avoid RPC delays when exiting suspend
  NFS: Add a tracepoint in nfs_fh_to_dentry()
  NFSv4: Don't retry the GETATTR on old stateid in nfs4_delegreturn_done()
  NFSv4: Handle NFS4ERR_OLD_STATEID in delegreturn
  ...

smb3: improve check for when we send the security descriptor context on create

We had cases in the previous patch where we were sending the security
descriptor context on SMB3 open (file create) in cases when we hadn't
mounted with with "modefromsid" mount option.

Add check for that mount flag before calling ad_sd_context in
open init.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

Merge tag 'vfio-v5.5-rc1' of git://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:

- Remove hugepage checks for reserved pfns (Ben Luo)

- Fix irq-bypass unregister ordering (Jiang Yi)

* tag 'vfio-v5.5-rc1' of git://github.com/awilliam/linux-vfio:
vfio/pci: call irq_bypass_unregister_producer() before freeing irq
vfio/type1: remove hugepage checks in is_invalid_reserved_pfn()

Merge tag 'for-linus-5.5b-rc1-tag' of git://git./linux/kernel/git/xen/tip

Pull more xen updates from Juergen Gross:

- a patch to fix a build warning

- a cleanup of no longer needed code in the Xen event handling

- a small series for the Xen grant driver avoiding high order
   allocations and replacing an insane global limit by a per-call one

- a small series fixing Xen frontend/backend module referencing

* tag 'for-linus-5.5b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen-blkback: allow module to be cleanly unloaded
  xen/xenbus: reference count registered modules
  xen/gntdev: switch from kcalloc() to kvcalloc()
  xen/gntdev: replace global limit of mapped pages by limit per call
  xen/gntdev: remove redundant non-zero check on ret
  xen/events: remove event handling recursion detection

Merge branch 'akpm' (patches from Andrew)

Merge misc Kconfig updates from Andrew Morton:
"A number of changes to Kconfig files under lib/ from Changbin Du and
  Krzysztof Kozlowski"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  lib/: fix Kconfig indentation
  kernel-hacking: move DEBUG_FS to 'Generic Kernel Debugging Instruments'
  kernel-hacking: move DEBUG_BUGVERBOSE to 'printk and dmesg options'
  kernel-hacking: create a submenu for scheduler debugging options
  kernel-hacking: move SCHED_STACK_END_CHECK after DEBUG_STACK_USAGE
  kernel-hacking: move Oops into 'Lockups and Hangs'
  kernel-hacking: move kernel testing and coverage options to same submenu
  kernel-hacking: group kernel data structures debugging together
  kernel-hacking: create submenu for arch special debugging options
  kernel-hacking: group sysrq/kgdb/ubsan into 'Generic Kernel Debugging Instruments'

r8169: fix rtl_hw_jumbo_disable for RTL8168evl

In referenced fix we removed the RTL8168e-specific jumbo config for
RTL8168evl in rtl_hw_jumbo_enable(). We have to do the same in
rtl_hw_jumbo_disable().

v2: fix referenced commit id

Fixes: 14012c9f3bb9 ("r8169: fix jumbo configuration for RTL8168evl")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pipe: don't use 'pipe_wait() for basic pipe IO

pipe_wait() may be simple, but since it relies on the pipe lock, it
means that we have to do the wakeup while holding the lock. That's
unfortunate, because the very first thing the waked entity will want to
do is to get the pipe lock for itself.

So get rid of the pipe_wait() usage by simply releasing the pipe lock,
doing the wakeup (if required) and then using wait_event_interruptible()
to wait on the right condition instead.

wait_event_interruptible() handles races on its own by comparing the
wakeup condition before and after adding itself to the wait queue, so
you can use an optimistic unlocked condition for it.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

NTB: Add Hygon Device ID

Signed-off-by: Jiasen Lin <linjiasen@hygon.cn>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

pipe: remove 'waiting_writers' merging logic

This code is ancient, and goes back to when we only had a single page
for the pipe buffers. The exact history is hidden in the mists of time
(ie "before git", and in fact predates the BK repository too).

At that long-ago point in time, it actually helped to try to merge big
back-and-forth pipe reads and writes, and not limit pipe reads to the
single pipe buffer in length just because that was all we had at a time.

However, since then we've expanded the pipe buffers to multiple pages,
and this logic really doesn't seem to make sense. And a lot of it is
somewhat questionable (ie "hmm, the user asked for a non-blocking read,
but we see that there's a writer pending, so let's wait anyway to get
the extra data that the writer will have").

But more importantly, it makes the "go to sleep" logic much less
obvious, and considering the wakeup issues we've had, I want to make for
less of those kinds of things.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pipe: fix and clarify pipe read wakeup logic

This is the read side version of the previous commit: it simplifies the
logic to only wake up waiting writers when necessary, and makes sure to
use a synchronous wakeup. This time not so much for GNU make jobserver
reasons (that pipe never fills up), but simply to get the writer going
quickly again.

A bit less verbose commentary this time, if only because I assume that
the write side commentary isn't going to be ignored if you touch this
code.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pipe: fix and clarify pipe write wakeup logic

The pipe rework ends up having been extra painful, partly becaused of
actual bugs with ordering and caching of the pipe state, but also
because of subtle performance issues.

In particular, the pipe rework caused the kernel build to inexplicably
slow down.

The reason turns out to be that the GNU make jobserver (which limits the
parallelism of the build) uses a pipe to implement a "token" system: a
parallel submake will read a character from the pipe to get the job
token before starting a new job, and will write a character back to the
pipe when it is done. The overall job limit is thus easily controlled
by just writing the appropriate number of initial token characters into
the pipe.

But to work well, that really means that the old behavior of write
wakeups being synchronous (WF_SYNC) is very important - when the pipe
writer wakes up a reader, we want the reader to actually get scheduled
immediately. Otherwise you lose the parallelism of the build.

The pipe rework lost that synchronous wakeup on write, and we had
clearly all forgotten the reasons and rules for it.

This rewrites the pipe write wakeup logic to do the required Wsync
wakeups, but also clarifies the logic and avoids extraneous wakeups.

It also ends up addign a number of comments about what oit does and why,
so that we hopefully don't end up forgetting about this next time we
change this code.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()

Use the new tcf_proto_check_kind() helper to make sure user
provided value is well formed.

BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:606 [inline]
BUG: KMSAN: uninit-value in string+0x4be/0x600 lib/vsprintf.c:668
CPU: 0 PID: 12358 Comm: syz-executor.1 Not tainted 5.4.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108
__msan_warning+0x64/0xc0 mm/kmsan/kmsan_instr.c:245
string_nocheck lib/vsprintf.c:606 [inline]
string+0x4be/0x600 lib/vsprintf.c:668
vsnprintf+0x218f/0x3210 lib/vsprintf.c:2510
__request_module+0x2b1/0x11c0 kernel/kmod.c:143
tcf_proto_lookup_ops+0x171/0x700 net/sched/cls_api.c:139
tc_chain_tmplt_add net/sched/cls_api.c:2730 [inline]
tc_ctl_chain+0x1904/0x38a0 net/sched/cls_api.c:2850
rtnetlink_rcv_msg+0x115a/0x1580 net/core/rtnetlink.c:5224
netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5242
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x110f/0x1330 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg net/socket.c:657 [inline]
___sys_sendmsg+0x14ff/0x1590 net/socket.c:2311
__sys_sendmsg net/socket.c:2356 [inline]
__do_sys_sendmsg net/socket.c:2365 [inline]
__se_sys_sendmsg+0x305/0x460 net/socket.c:2363
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2363
do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45a649
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f0790795c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000045a649
RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000006
RBP: 000000000075bfc8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f07907966d4
R13: 00000000004c8db5 R14: 00000000004df630 R15: 00000000ffffffff

Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline]
kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132
kmsan_slab_alloc+0x97/0x100 mm/kmsan/kmsan_hooks.c:86
slab_alloc_node mm/slub.c:2773 [inline]
__kmalloc_node_track_caller+0xe27/0x11a0 mm/slub.c:4381
__kmalloc_reserve net/core/skbuff.c:141 [inline]
__alloc_skb+0x306/0xa10 net/core/skbuff.c:209
alloc_skb include/linux/skbuff.h:1049 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline]
netlink_sendmsg+0x783/0x1330 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg net/socket.c:657 [inline]
___sys_sendmsg+0x14ff/0x1590 net/socket.c:2311
__sys_sendmsg net/socket.c:2356 [inline]
__do_sys_sendmsg net/socket.c:2365 [inline]
__se_sys_sendmsg+0x305/0x460 net/socket.c:2363
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2363
do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 6f96c3c6904c ("net_sched: fix backward compatibility for TCA_KIND")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: add missing RX enabling for WoL on RTL8125

RTL8125 also requires to enable RX for WoL.

v2: add missing Fixes tag

Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost/vsock: accept only packets with the right dst_cid

When we receive a new packet from the guest, we check if the
src_cid is correct, but we forgot to check the dst_cid.

The host should accept only packets where dst_cid is
equal to the host CID.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: dp83867: fix hfs boot in rgmii mode

The commit ef87f7da6b28 ("net: phy: dp83867: move dt parsing to probe")
causes regression on TI dra71x-evm and dra72x-evm, where DP83867 PHY is
used in "rgmii-id" mode - the networking stops working.
Unfortunately, it's not enough to just move DT parsing code to .probe() as
it depends on phydev->interface value, which is set to correct value abter
the .probe() is completed and before calling .config_init(). So, RGMII
configuration can't be loaded from DT.

To fix and issue
- move RGMII validation code to .config_init()
- parse RGMII parameters in dp83867_of_init(), but consider them as
optional.

Fixes: ef87f7da6b28 ("net: phy: dp83867: move dt parsing to probe")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpsw: fix extra rx interrupt

Now RX interrupt is triggered twice every time, because in
cpsw_rx_interrupt() it is asked first and then disabled. So there will be
pending interrupt always, when RX interrupt is enabled again in NAPI
handler.

Fix it by first disabling IRQ and then do ask.

Fixes: 870915feabdc ("drivers: net: cpsw: remove disable_irq/enable_irq as irq can be masked from cpsw itself")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet: protect against too small mtu values.

syzbot was once again able to crash a host by setting a very small mtu
on loopback device.

Let's make inetdev_valid_mtu() available in include/net/ip.h,
and use it in ip_setup_cork(), so that we protect both ip_append_page()
and __ip_append_data()

Also add a READ_ONCE() when the device mtu is read.

Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(),
even if other code paths might write over this field.

Add a big comment in include/linux/netdevice.h about dev->mtu
needing READ_ONCE()/WRITE_ONCE() annotations.

Hopefully we will add the missing ones in followup patches.

[1]

refcount_t: saturated; leaking memory.
WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
panic+0x2e3/0x75c kernel/panic.c:221
__warn.cold+0x2f/0x3e kernel/panic.c:582
report_bug+0x289/0x300 lib/bug.c:195
fixup_bug arch/x86/kernel/traps.c:174 [inline]
fixup_bug arch/x86/kernel/traps.c:169 [inline]
do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267
do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286
invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027
RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22
Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89
RSP: 0018:ffff88809689f550 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c
RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1
R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001
R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40
refcount_add include/linux/refcount.h:193 [inline]
skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999
sock_wmalloc+0xf1/0x120 net/core/sock.c:2096
ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383
udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276
inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821
kernel_sendpage+0x92/0xf0 net/socket.c:3794
sock_sendpage+0x8b/0xc0 net/socket.c:936
pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458
splice_from_pipe_feed fs/splice.c:512 [inline]
__splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636
splice_from_pipe+0x108/0x170 fs/splice.c:671
generic_splice_sendpage+0x3c/0x50 fs/splice.c:842
do_splice_from fs/splice.c:861 [inline]
direct_splice_actor+0x123/0x190 fs/splice.c:1035
splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990
do_splice_direct+0x1da/0x2a0 fs/splice.c:1078
do_sendfile+0x597/0xd00 fs/read_write.c:1464
__do_sys_sendfile64 fs/read_write.c:1525 [inline]
__se_sys_sendfile64 fs/read_write.c:1511 [inline]
__x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x441409
Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409
RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005
RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180
R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000
Kernel Offset: disabled
Rebooting in 86400 seconds..

Fixes: 1470ddf7f8ce ("inet: Remove explicit write references to sk/inet in ip_append_data")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gre: refetch erspan header from skb->data after pskb_may_pull()

After pskb_may_pull() we should always refetch the header
pointers from the skb->data in case it got reallocated.

In gre_parse_header(), the erspan header is still fetched
from the 'options' pointer which is fetched before
pskb_may_pull().

Found this during code review of a KMSAN bug report.

Fixes: cb73ee40b1b3 ("net: ip_gre: use erspan key field for tunnel lookup")
Cc: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Acked-by: William Tu <u9012063@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pppoe: remove redundant BUG_ON() check in pppoe_pernet

Passing NULL to pppoe_pernet causes a crash via BUG_ON.
Dereferencing net in net_generici() also has the same effect. This patch
removes the redundant BUG_ON check on the same parameter.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

lib/: fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ / /' -i */Kconfig

Link: http://lkml.kernel.org/r/20191120140140.19148-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel-hacking: move DEBUG_FS to 'Generic Kernel Debugging Instruments'

DEBUG_FS does not belong to 'Compile-time checks and compiler options'.

Link: http://lkml.kernel.org/r/20190909144453.3520-10-changbin.du@gmail.com
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel-hacking: move DEBUG_BUGVERBOSE to 'printk and dmesg options'

I think DEBUG_BUGVERBOSE is a dmesg option which gives more debug info
to dmesg.

Link: http://lkml.kernel.org/r/20190909144453.3520-9-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel-hacking: create a submenu for scheduler debugging options

Create a submenu 'Scheduler Debugging' for scheduler debugging options.

Link: http://lkml.kernel.org/r/20190909144453.3520-8-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel-hacking: move SCHED_STACK_END_CHECK after DEBUG_STACK_USAGE

They are both memory debug options to debug kernel stack issues.

Link: http://lkml.kernel.org/r/20190909144453.3520-7-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel-hacking: move Oops into 'Lockups and Hangs'

They are similar options so place them together.

Link: http://lkml.kernel.org/r/20190909144453.3520-6-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel-hacking: move kernel testing and coverage options to same submenu

Move error injection, coverage, testing options to a new top level
submenu 'Kernel Testing and Coverage'. They are all for test purpose.

Link: http://lkml.kernel.org/r/20190909144453.3520-5-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel-hacking: group kernel data structures debugging together

Group these similar runtime data structures verification options
together.

Link: http://lkml.kernel.org/r/20190909144453.3520-4-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel-hacking: create submenu for arch special debugging options

The arch special options are a little long, so create a submenu for
them.

Link: http://lkml.kernel.org/r/20190909144453.3520-3-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel-hacking: group sysrq/kgdb/ubsan into 'Generic Kernel Debugging Instruments'

Patch series "hacking: make 'kernel hacking' menu better structurized", v3.

This series is a trivial improvment for the layout of 'kernel hacking'
configuration menu. Now we have many items in it which makes takes a
little time to look up them since they are not well structurized yet.

Early discussion is here:
https://lkml.org/lkml/2019/9/1/39

This patch (of 9):

Group generic kernel debugging instruments sysrq/kgdb/ubsan together
into a new submenu.

Link: http://lkml.kernel.org/r/20190909144453.3520-2-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pipe: fix poll/select race introduced by the pipe rework

The kernel wait queues have a basic rule to them: you add yourself to
the wait-queue first, and then you check the things that you're going to
wait on. That avoids the races with the event you're waiting for.

The same goes for poll/select logic: the "poll_wait()" goes first, and
then you check the things you're polling for.

Of course, if you use locking, the ordering doesn't matter since the
lock will serialize with anything that changes the state you're looking
at. That's not the case here, though.

So move the poll_wait() first in pipe_poll(), before you start looking
at the pipe state.

Fixes: 8cefc107ca54 ("pipe: Use head and tail pointers for the ring, not cursor and length")
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nfsd: depend on CRYPTO_MD5 for legacy client tracking

The legacy client tracking infrastructure of nfsd makes use of MD5 to
derive a client's recovery directory name. As the nfsd module doesn't
declare any dependency on CRYPTO_MD5, though, it may fail to allocate
the hash if the kernel was compiled without it. As a result, generation
of client recovery directories will fail with the following error:

NFSD: unable to generate recoverydir name

The explicit dependency on CRYPTO_MD5 was removed as redundant back in
6aaa67b5f3b9 (NFSD: Remove redundant "select" clauses in fs/Kconfig
2008-02-11) as it was already implicitly selected via RPCSEC_GSS_KRB5.
This broke when RPCSEC_GSS_KRB5 was made optional for NFSv4 in commit
df486a25900f (NFS: Fix the selection of security flavours in Kconfig) at
a later point.

Fix the issue by adding back an explicit dependency on CRYPTO_MD5.

Fixes: df486a25900f (NFS: Fix the selection of security flavours in Kconfig)
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

NFSD fixing possible null pointer derefering in copy offload

Static checker revealed possible error path leading to possible
NULL pointer dereferencing.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: e0639dc5805a: ("NFSD introduce async copy feature")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Merge branch 'tcp-fix-handling-of-stale-syncookies-timestamps'

Guillaume Nault says:

====================
tcp: fix handling of stale syncookies timestamps

The synflood timestamps (->ts_recent_stamp and ->synq_overflow_ts) are
only refreshed when the syncookie protection triggers. Therefore, their
value can become very far apart from jiffies if no synflood happens for
a long time.

If jiffies grows too much and wraps while the synflood timestamp isn't
refreshed, then time_after32() might consider the later to be in the
future. This can trick tcp_synq_no_recent_overflow() into returning
erroneous values and rejecting valid ACKs.

Patch 1 handles the case of ACKs using legitimate syncookies.
Patch 2 handles the case of stray ACKs.
Patch 3 annotates lockless timestamp operations with READ_ONCE() and
WRITE_ONCE().

Changes from v3:
  - Fix description of time_between32() (found by Eric Dumazet).
  - Use more accurate Fixes tag in patch 3 (suggested by Eric Dumazet).

Changes from v2:
  - Define and use time_between32() instead of a pair of
    time_before32/time_after32 (suggested by Eric Dumazet).
  - Use 'last_overflow - HZ' as lower bound in
    tcp_synq_no_recent_overflow(), to accommodate for concurrent
    timestamp updates (found by Eric Dumazet).
  - Add a third patch to annotate lockless accesses to .ts_recent_stamp.

Changes from v1:
  - Initialising timestamps at socket creation time is not enough
    because jiffies wraps in 24 days with HZ=1000 (Eric Dumazet).
    Handle stale timestamps in tcp_synq_overflow() and
    tcp_synq_no_recent_overflow() instead.
  - Rework commit description.
  - Add a second patch to handle the case of stray ACKs.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()

Syncookies borrow the ->rx_opt.ts_recent_stamp field to store the
timestamp of the last synflood. Protect them with READ_ONCE() and
WRITE_ONCE() since reads and writes aren't serialised.

Use of .rx_opt.ts_recent_stamp for storing the synflood timestamp was
introduced by a0f82f64e269 ("syncookies: remove last_synq_overflow from
struct tcp_sock"). But unprotected accesses were already there when
timestamp was stored in .last_synq_overflow.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: tighten acceptance of ACKs not matching a child socket

When no synflood occurs, the synflood timestamp isn't updated.
Therefore it can be so old that time_after32() can consider it to be
in the future.

That's a problem for tcp_synq_no_recent_overflow() as it may report
that a recent overflow occurred while, in fact, it's just that jiffies
has grown past 'last_overflow' + TCP_SYNCOOKIE_VALID + 2^31.

Spurious detection of recent overflows lead to extra syncookie
verification in cookie_v[46]_check(). At that point, the verification
should fail and the packet dropped. But we should have dropped the
packet earlier as we didn't even send a syncookie.

Let's refine tcp_synq_no_recent_overflow() to report a recent overflow
only if jiffies is within the
[last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval. This
way, no spurious recent overflow is reported when jiffies wraps and
'last_overflow' becomes in the future from the point of view of
time_after32().

However, if jiffies wraps and enters the
[last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval (with
'last_overflow' being a stale synflood timestamp), then
tcp_synq_no_recent_overflow() still erroneously reports an
overflow. In such cases, we have to rely on syncookie verification
to drop the packet. We unfortunately have no way to differentiate
between a fresh and a stale syncookie timestamp.

In practice, using last_overflow as lower bound is problematic.
If the synflood timestamp is concurrently updated between the time
we read jiffies and the moment we store the timestamp in
'last_overflow', then 'now' becomes smaller than 'last_overflow' and
tcp_synq_no_recent_overflow() returns true, potentially dropping a
valid syncookie.

Reading jiffies after loading the timestamp could fix the problem,
but that'd require a memory barrier. Let's just accommodate for
potential timestamp growth instead and extend the interval using
'last_overflow - HZ' as lower bound.

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: fix rejected syncookies due to stale timestamps

If no synflood happens for a long enough period of time, then the
synflood timestamp isn't refreshed and jiffies can advance so much
that time_after32() can't accurately compare them any more.

Therefore, we can end up in a situation where time_after32(now,
last_overflow + HZ) returns false, just because these two values are
too far apart. In that case, the synflood timestamp isn't updated as
it should be, which can trick tcp_synq_no_recent_overflow() into
rejecting valid syncookies.

For example, let's consider the following scenario on a system
with HZ=1000:

  * The synflood timestamp is 0, either because that's the timestamp
    of the last synflood or, more commonly, because we're working with
    a freshly created socket.

  * We receive a new SYN, which triggers synflood protection. Let's say
    that this happens when jiffies == 2147484649 (that is,
    'synflood timestamp' + HZ + 2^31 + 1).

  * Then tcp_synq_overflow() doesn't update the synflood timestamp,
    because time_after32(2147484649, 1000) returns false.
    With:
      - 2147484649: the value of jiffies, aka. 'now'.
      - 1000: the value of 'last_overflow' + HZ.

  * A bit later, we receive the ACK completing the 3WHS. But
    cookie_v[46]_check() rejects it because tcp_synq_no_recent_overflow()
    says that we're not under synflood. That's because
    time_after32(2147484649, 120000) returns false.
    With:
      - 2147484649: the value of jiffies, aka. 'now'.
      - 120000: the value of 'last_overflow' + TCP_SYNCOOKIE_VALID.

    Of course, in reality jiffies would have increased a bit, but this
    condition will last for the next 119 seconds, which is far enough
    to accommodate for jiffie's growth.

Fix this by updating the overflow timestamp whenever jiffies isn't
within the [last_overflow, last_overflow + HZ] range. That shouldn't
have any performance impact since the update still happens at most once
per second.

Now we're guaranteed to have fresh timestamps while under synflood, so
tcp_synq_no_recent_overflow() can safely use it with time_after32() in
such situations.

Stale timestamps can still make tcp_synq_no_recent_overflow() return
the wrong verdict when not under synflood. This will be handled in the
next patch.

For 64 bits architectures, the problem was introduced with the
conversion of ->tw_ts_recent_stamp to 32 bits integer by commit
cca9bab1b72c ("tcp: use monotonic timestamps for PAWS").
The problem has always been there on 32 bits architectures.

Fixes: cca9bab1b72c ("tcp: use monotonic timestamps for PAWS")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mlx5-fixes-2019-12-05' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2019-12-05

This series introduces some fixes to mlx5 driver.

Please pull and let me know if there is any problem.

For -stable v4.19:
('net/mlx5e: Query global pause state before setting prio2buffer')

For -stable v5.3
('net/mlx5e: Fix SFF 8472 eeprom length')
('net/mlx5e: Fix translation of link mode into speed')
('net/mlx5e: Fix freeing flow with kfree() and not kvfree()')
('net/mlx5e: ethtool, Fix analysis of speed setting')
('net/mlx5e: Fix TXQ indices to be sequential')
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

lpc_eth: kernel BUG on remove

We may have found a bug in the nxp/lpc_eth.c driver. The function
platform_set_drvdata() is called twice, the second time it is called,
in lpc_mii_init(), it overwrites the struct net_device which should be
at pdev->dev->driver_data with pldat->mii_bus. When trying to remove
the driver, in lpc_eth_drv_remove(), platform_get_drvdata() will
return the pldat->mii_bus pointer and try to use it as a struct
net_device pointer. This causes unregister_netdev to segfault and
generate a kernel BUG. Is this reproducible?

Signed-off-by: Daniel Martinez <linux@danielsmartinez.com>
Signed-off-by: Bruno Carneiro da Cunha <brunocarneirodacunha@usp.br>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: md5: fix potential overestimation of TCP option space

Back in 2008, Adam Langley fixed the corner case of packets for flows
having all of the following options : MD5 TS SACK

Since MD5 needs 20 bytes, and TS needs 12 bytes, no sack block
can be cooked from the remaining 8 bytes.

tcp_established_options() correctly sets opts->num_sack_blocks
to zero, but returns 36 instead of 32.

This means TCP cooks packets with 4 extra bytes at the end
of options, containing unitialized bytes.

Fixes: 33ad798c924b ("tcp: options clean up")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-tc-indirect-block-relay'

John Hurley says:

====================
Ensure egress un/bind are relayed with indirect blocks

On register and unregister for indirect blocks, a command is called that
sends a bind/unbind event to the registering driver. This command assumes
that the bind to indirect block will be on ingress. However, drivers such
as NFP have allowed binding to clsact qdiscs as well as ingress qdiscs
from mainline Linux 5.2. A clsact qdisc binds to an ingress and an egress
block.

Rather than assuming that an indirect bind is always ingress, modify the
function names to remove the ingress tag (patch 1). In cls_api, which is
used by NFP to offload TC flower, generate bind/unbind message for both
ingress and egress blocks on the event of indirectly
registering/unregistering from that block. Doing so mimics the behaviour
of both ingress and clsact qdiscs on initialise and destroy.

This now ensures that drivers such as NFP receive the correct binder type
for the indirect block registration.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: allow indirect blocks to bind to clsact in TC

When a device is bound to a clsact qdisc, bind events are triggered to
registered drivers for both ingress and egress. However, if a driver
registers to such a device using the indirect block routines then it is
assumed that it is only interested in ingress offload and so only replays
ingress bind/unbind messages.

The NFP driver supports the offload of some egress filters when
registering to a block with qdisc of type clsact. However, on unregister,
if the block is still active, it will not receive an unbind egress
notification which can prevent proper cleanup of other registered
callbacks.

Modify the indirect block callback command in TC to send messages of
ingress and/or egress bind depending on the qdisc in use. NFP currently
supports egress offload for TC flower offload so the changes are only
added to TC.

Fixes: 4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: core: rename indirect block ingress cb function

With indirect blocks, a driver can register for callbacks from a device
that is does not 'own', for example, a tunnel device. When registering to
or unregistering from a new device, a callback is triggered to generate
a bind/unbind event. This, in turn, allows the driver to receive any
existing rules or to properly clean up installed rules.

When first added, it was assumed that all indirect block registrations
would be for ingress offloads. However, the NFP driver can, in some
instances, support clsact qdisc binds for egress offload.

Change the name of the indirect block callback command in flow_offload to
remove the 'ingress' identifier from it. While this does not change
functionality, a follow up patch will implement a more more generic
callback than just those currently just supporting ingress offload.

Fixes: 4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net-sysfs: Call dev_hold always in netdev_queue_add_kobject

Dev_hold has to be called always in netdev_queue_add_kobject.
Otherwise usage count drops below 0 in case of failure in
kobject_init_and_add.

Fixes: b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject")
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Miller <davem@davemloft.net>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: fix flow dissection on Tx path

Commit 43e665287f93 ("net-next: dsa: fix flow dissection") added an
ability to override protocol and network offset during flow dissection
for DSA-enabled devices (i.e. controllers shipped as switch CPU ports)
in order to fix skb hashing for RPS on Rx path.

However, skb_hash() and added part of code can be invoked not only on
Rx, but also on Tx path if we have a multi-queued device and:
- kernel is running on UP system or
- XPS is not configured.

The call stack in this two cases will be like: dev_queue_xmit() ->
__dev_queue_xmit() -> netdev_core_pick_tx() -> netdev_pick_tx() ->
skb_tx_hash() -> skb_get_hash().

The problem is that skbs queued for Tx have both network offset and
correct protocol already set up even after inserting a CPU tag by DSA
tagger, so calling tag_ops->flow_dissect() on this path actually only
breaks flow dissection and hashing.

This can be observed by adding debug prints just before and right after
tag_ops->flow_dissect() call to the related block of code:

Before the patch:

Rx path (RPS):

[   19.240001] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */
[   19.244271] tag_ops->flow_dissect()
[   19.247811] Rx: proto: 0x0800, nhoff: 8 /* ETH_P_IP */

[   19.215435] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */
[   19.219746] tag_ops->flow_dissect()
[   19.223241] Rx: proto: 0x0806, nhoff: 8 /* ETH_P_ARP */

[   18.654057] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */
[   18.658332] tag_ops->flow_dissect()
[   18.661826] Rx: proto: 0x8100, nhoff: 8 /* ETH_P_8021Q */

Tx path (UP system):

[   18.759560] Tx: proto: 0x0800, nhoff: 26 /* ETH_P_IP */
[   18.763933] tag_ops->flow_dissect()
[   18.767485] Tx: proto: 0x920b, nhoff: 34 /* junk */

[   22.800020] Tx: proto: 0x0806, nhoff: 26 /* ETH_P_ARP */
[   22.804392] tag_ops->flow_dissect()
[   22.807921] Tx: proto: 0x920b, nhoff: 34 /* junk */

[   16.898342] Tx: proto: 0x86dd, nhoff: 26 /* ETH_P_IPV6 */
[   16.902705] tag_ops->flow_dissect()
[   16.906227] Tx: proto: 0x920b, nhoff: 34 /* junk */

After:

Rx path (RPS):

[   16.520993] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */
[   16.525260] tag_ops->flow_dissect()
[   16.528808] Rx: proto: 0x0800, nhoff: 8 /* ETH_P_IP */

[   15.484807] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */
[   15.490417] tag_ops->flow_dissect()
[   15.495223] Rx: proto: 0x0806, nhoff: 8 /* ETH_P_ARP */

[   17.134621] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */
[   17.138895] tag_ops->flow_dissect()
[   17.142388] Rx: proto: 0x8100, nhoff: 8 /* ETH_P_8021Q */

Tx path (UP system):

[   15.499558] Tx: proto: 0x0800, nhoff: 26 /* ETH_P_IP */

[   20.664689] Tx: proto: 0x0806, nhoff: 26 /* ETH_P_ARP */

[   18.565782] Tx: proto: 0x86dd, nhoff: 26 /* ETH_P_IPV6 */

In order to fix that we can add the check 'proto == htons(ETH_P_XDSA)'
to prevent code from calling tag_ops->flow_dissect() on Tx.
I also decided to initialize 'offset' variable so tagger callbacks can
now safely leave it untouched without provoking a chaos.

Fixes: 43e665287f93 ("net-next: dsa: fix flow dissection")
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/tls: Fix return values to avoid ENOTSUPP

ENOTSUPP is not available in userspace, for example:

setsockopt failed, 524, Unknown error 524

Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:

- fix CPU topology setup for SCHED_MC case

- fix VDSO regression

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8947/1: Fix __arch_get_hw_counter() access to CNTVCT
ARM: 8943/1: Fix topology setup in case of CPU hotplug for CONFIG_SCHED_MC

Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
"A set of fixes that we've merged late, but for the most part that have
  been sitting in -next for a while through platform maintainer trees:

   - Fixes to suspend/resume on Tegra, caused by the added features this
     merge window

   - Cleanups and minor fixes to TI additions this merge window

   - Tee fixes queued up late before the merge window, included here.

   - A handful of other fixlets

  There's also a refresh of the shareed config files (multi_v* on
  32-bit, and defconfig on 64-bit), to avoid conflicts when we get new
  contributions"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
  ARM: multi_v7_defconfig: Restore debugfs support
  ARM: defconfig: re-run savedefconfig on multi_v* configs
  arm64: defconfig: re-run savedefconfig
  ARM: pxa: Fix resource properties
  soc: mediatek: cmdq: fixup wrong input order of write api
  soc: aspeed: Fix snoop_file_poll()'s return type
  MAINTAINERS: Switch to Marvell addresses
  MAINTAINERS: update Cavium ThunderX drivers
  Revert "arm64: dts: juno: add dma-ranges property"
  MAINTAINERS: Make Nicolas Saenz Julienne the new bcm2835 maintainer
  firmware: arm_scmi: Avoid double free in error flow
  arm64: dts: juno: Fix UART frequency
  ARM: dts: Fix sgx sysconfig register for omap4
  arm: socfpga: execute cold reboot by default
  ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangs
  ARM: dts: dra7: fix cpsw mdio fck clock
  ARM: dts: am57xx-beagle-x15: Update pinmux name to ddr_3_3v
  ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity
  soc/tegra: pmc: Add reset sources and levels on Tegra194
  soc/tegra: pmc: Add missing IRQ callbacks on Tegra194
  ...

Merge tag 'arm64-upstream' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

- ZONE_DMA32 initialisation fix when memblocks fall entirely within the
   first GB (used by ZONE_DMA in 5.5 for Raspberry Pi 4).

- Couple of ftrace fixes following the FTRACE_WITH_REGS patchset.

- access_ok() fix for the Tagged Address ABI when called from from a
   kernel thread (asynchronous I/O): the kthread does not have the TIF
   flags of the mm owner, so untag the user address unconditionally.

- KVM compute_layout() called before the alternatives code patching.

- Minor clean-ups.

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: entry: refine comment of stack overflow check
  arm64: ftrace: fix ifdeffery
  arm64: KVM: Invoke compute_layout() before alternatives are applied
  arm64: Validate tagged addresses in access_ok() called from kernel threads
  arm64: mm: Fix column alignment for UXN in kernel_page_tables
  arm64: insn: consistently handle exit text
  arm64: mm: Fix initialisation of DMA zones on non-NUMA systems

pipe: Fix iteration end check in fuse_dev_splice_write()

Fix the iteration end check in fuse_dev_splice_write(). The iterator
position can only be compared with == or != since wrappage may be involved.

Fixes: 8cefc107ca54 ("pipe: Use head and tail pointers for the ring, not cursor and length")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'powerpc-5.5-2' of git://git./linux/kernel/git/powerpc/linux

Pull more powerpc updates from Michael Ellerman:
"A few commits splitting the KASAN instrumented bitops header in three,
  to match the split of the asm-generic bitops headers.

  This is needed on powerpc because we use the generic bitops for the
  non-atomic case only, whereas the existing KASAN instrumented bitops
  assume all the underlying operations are provided by the arch as
  arch_foo() versions.

  Thanks to: Daniel Axtens & Christophe Leroy"

* tag 'powerpc-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  docs/core-api: Remove possibly confusing sub-headings from Bit Operations
  powerpc: support KASAN instrumentation of bitops
  kasan: support instrumented bitops combined with generic bitops

Merge tag 'powerpc-5.5-3' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
"One fix for a regression introduced by our recent rework of cache
  flushing on memory hotunplug.

  Like several other arches, our VDSO clock_getres() needed a fix to
  match the semantics of posix_get_hrtimer_res().

  A fix for a boot crash on Power9 LPARs using PCI LSI interrupts.

  A commit disabling use of the trace_imc PMU (not the core PMU) on
  Power9 systems, because it can lead to checkstops, until a workaround
  is developed.

  A handful of other minor fixes.

  Thanks to: Aneesh Kumar K.V, Anju T Sudhakar, Ard Biesheuvel,
  Christophe Leroy, Cédric Le Goater, Madhavan Srinivasan, Vincenzo
  Frascino"

* tag 'powerpc-5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/perf: Disable trace_imc pmu
  powerpc/powernv: Avoid re-registration of imc debugfs directory
  powerpc/pmem: Convert to EXPORT_SYMBOL_GPL
  powerpc/archrandom: fix arch_get_random_seed_int()
  powerpc: Fix vDSO clock_getres()
  powerpc/pmem: Fix kernel crash due to wrong range value usage in flush_dcache_range
  powerpc/xive: Skip ioremap() of ESB pages for LSI interrupts
  powerpc/kasan: Fix boot failure with RELOCATABLE && FSL_BOOKE

Merge tag 'sound-fix-5.5-rc1' of git://git./linux/kernel/git/tiwai/sound

Pull more sound updates from Takashi Iwai:
"A few last-minute updates, most of them are the regression fixes:

   - AMD HD-audio HDMI runtime PM improvements

   - Fixes for HD-audio HDMI regressions wrt DP-MST

   - A regression fix for the previous aloop enhancement

   - A fix for a long-time problem in PCM OSS layer that was spotted by
     fuzzer now

   - A few HD-audio quirks"

* tag 'sound-fix-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: pcm: oss: Avoid potential buffer overflows
  ALSA: hda: hdmi - Keep old slot assignment behavior for Intel platforms
  ALSA: hda: Modify stream stripe mask only when needed
  ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen
  ALSA: hda: hdmi - preserve non-MST PCM routing for Intel platforms
  ALSA: hda: hdmi - fix kernel oops caused by invalid PCM idx
  ALSA: hda/realtek - Fix inverted bass GPIO pin on Acer 8951G
  ALSA: hda/realtek - Dell headphone has noise on unmute for ALC236
  ALSA: hda: hdmi - fix regression in connect list handling
  ALSA: aloop: Avoid pointer dereference before null-check
  ALSA: hda/hdmi - enable automatic runtime pm for AMD HDMI codecs by default
  ALSA: hda/hdmi - enable runtime pm for newer AMD display audio
  ALSA: hda/hdmi - Add new pci ids for AMD GPU display audio
  ALSA: hda/hdmi - fix vgaswitcheroo detection for AMD

pipe: fix incorrect caching of pipe state over pipe_wait()

Similarly to commit 8f868d68d335 ("pipe: Fix missing mask update after
pipe_wait()") this fixes a case where the pipe rewrite ended up caching
the pipe state incorrectly over a pipe lock drop event.

It wasn't quite as obvious, because you needed to splice data from a
pipe to a file, which is a fairly unusual operation, but it's completely
wrong.

Make sure we load the pipe head/tail/size information only after we've
waited for there to be data in the pipe.

While in that file, also make one of the splice helper functions use the
canonical arghument order for pipe_empty(). That's syntactic - pipe
emptiness is just that head and tail are equal, and thus mixing up head
and tail doesn't really matter. It's still wrong, though.

Reported-by: David Sterba <dsterba@suse.cz>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

smb3: fix mode passed in on create for modetosid mount option

When using the special SID to store the mode bits in an ACE (See
http://technet.microsoft.com/en-us/library/hh509017(v=ws.10).aspx)
which is enabled with mount parm "modefromsid" we were not
passing in the mode via SMB3 create (although chmod was enabled).
SMB3 create allows a security descriptor context to be passed
in (which is more atomic and thus preferable to setting the mode
bits after create via a setinfo).

This patch enables setting the mode bits on create when using
modefromsid mount option. In addition it fixes an endian
error in the definition of the Control field flags in the SMB3
security descriptor. It also makes the ACE type of the special
SID better match the documentation (and behavior of servers
which use this to store mode bits in SMB3 ACLs).

Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

net: avoid an indirect call in ____sys_recvmsg()

CONFIG_RETPOLINE=y made indirect calls expensive.

gcc seems to add an indirect call in ____sys_recvmsg().

Rewriting the code slightly makes sure to avoid this indirection.

Alternative would be to not call sock_recvmsg() and instead
use security_socket_recvmsg() and sock_recvmsg_nosec(),
but this is less readable IMO.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: David Laight <David.Laight@aculab.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

phy: mdio-thunder: add missed pci_release_regions in remove

The driver forgets to call pci_release_regions() in remove like that
in probe failure.
Add the missed call to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: fix ordering of tipc module init and exit routine

In order to set/get/dump, the tipc uses the generic netlink
infrastructure. So, when tipc module is inserted, init function
calls genl_register_family().
After genl_register_family(), set/get/dump commands are immediately
allowed and these callbacks internally use the net_generic.
net_generic is allocated by register_pernet_device() but this
is called after genl_register_family() in the __init function.
So, these callbacks would use un-initialized net_generic.

Test commands:
    #SHELL1
    while :
    do
        modprobe tipc
        modprobe -rv tipc
    done

    #SHELL2
    while :
    do
        tipc link list
    done

Splat looks like:
[   59.616322][ T2788] kasan: CONFIG_KASAN_INLINE enabled
[   59.617234][ T2788] kasan: GPF could be caused by NULL-ptr deref or user memory access
[   59.618398][ T2788] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[   59.619389][ T2788] CPU: 3 PID: 2788 Comm: tipc Not tainted 5.4.0+ #194
[   59.620231][ T2788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   59.621428][ T2788] RIP: 0010:tipc_bcast_get_broadcast_mode+0x131/0x310 [tipc]
[   59.622379][ T2788] Code: c7 c6 ef 8b 38 c0 65 ff 0d 84 83 c9 3f e8 d7 a5 f2 e3 48 8d bb 38 11 00 00 48 b8 00 00 00 00
[   59.622550][ T2780] NET: Registered protocol family 30
[   59.624627][ T2788] RSP: 0018:ffff88804b09f578 EFLAGS: 00010202
[   59.624630][ T2788] RAX: dffffc0000000000 RBX: 0000000000000011 RCX: 000000008bc66907
[   59.624631][ T2788] RDX: 0000000000000229 RSI: 000000004b3cf4cc RDI: 0000000000001149
[   59.624633][ T2788] RBP: ffff88804b09f588 R08: 0000000000000003 R09: fffffbfff4fb3df1
[   59.624635][ T2788] R10: fffffbfff50318f8 R11: ffff888066cadc18 R12: ffffffffa6cc2f40
[   59.624637][ T2788] R13: 1ffff11009613eba R14: ffff8880662e9328 R15: ffff8880662e9328
[   59.624639][ T2788] FS:  00007f57d8f7b740(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000
[   59.624645][ T2788] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   59.625875][ T2780] tipc: Started in single node mode
[   59.626128][ T2788] CR2: 00007f57d887a8c0 CR3: 000000004b140002 CR4: 00000000000606e0
[   59.633991][ T2788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   59.635195][ T2788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   59.636478][ T2788] Call Trace:
[   59.637025][ T2788]  tipc_nl_add_bc_link+0x179/0x1470 [tipc]
[   59.638219][ T2788]  ? lock_downgrade+0x6e0/0x6e0
[   59.638923][ T2788]  ? __tipc_nl_add_link+0xf90/0xf90 [tipc]
[   59.639533][ T2788]  ? tipc_nl_node_dump_link+0x318/0xa50 [tipc]
[   59.640160][ T2788]  ? mutex_lock_io_nested+0x1380/0x1380
[   59.640746][ T2788]  tipc_nl_node_dump_link+0x4fd/0xa50 [tipc]
[   59.641356][ T2788]  ? tipc_nl_node_reset_link_stats+0x340/0x340 [tipc]
[   59.642088][ T2788]  ? __skb_ext_del+0x270/0x270
[   59.642594][ T2788]  genl_lock_dumpit+0x85/0xb0
[   59.643050][ T2788]  netlink_dump+0x49c/0xed0
[   59.643529][ T2788]  ? __netlink_sendskb+0xc0/0xc0
[   59.644044][ T2788]  ? __netlink_dump_start+0x190/0x800
[   59.644617][ T2788]  ? __mutex_unlock_slowpath+0xd0/0x670
[   59.645177][ T2788]  __netlink_dump_start+0x5a0/0x800
[   59.645692][ T2788]  genl_rcv_msg+0xa75/0xe90
[   59.646144][ T2788]  ? __lock_acquire+0xdfe/0x3de0
[   59.646692][ T2788]  ? genl_family_rcv_msg_attrs_parse+0x320/0x320
[   59.647340][ T2788]  ? genl_lock_dumpit+0xb0/0xb0
[   59.647821][ T2788]  ? genl_unlock+0x20/0x20
[   59.648290][ T2788]  ? genl_parallel_done+0xe0/0xe0
[   59.648787][ T2788]  ? find_held_lock+0x39/0x1d0
[   59.649276][ T2788]  ? genl_rcv+0x15/0x40
[   59.649722][ T2788]  ? lock_contended+0xcd0/0xcd0
[   59.650296][ T2788]  netlink_rcv_skb+0x121/0x350
[   59.650828][ T2788]  ? genl_family_rcv_msg_attrs_parse+0x320/0x320
[   59.651491][ T2788]  ? netlink_ack+0x940/0x940
[   59.651953][ T2788]  ? lock_acquire+0x164/0x3b0
[   59.652449][ T2788]  genl_rcv+0x24/0x40
[   59.652841][ T2788]  netlink_unicast+0x421/0x600
[ ... ]

Fixes: 7e4369057806 ("tipc: fix a slab object leak")
Fixes: a62fbccecd62 ("tipc: make subscriber server support net namespace")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mqprio: Fix out-of-bounds access in mqprio_dump

When user runs a command like
tc qdisc add dev eth1 root mqprio
KASAN stack-out-of-bounds warning is emitted.
Currently, NLA_ALIGN macro used in mqprio_dump provides too large
buffer size as argument for nla_put and memcpy down the call stack.
The flow looks like this:
1. nla_put expects exact object size as an argument;
2. Later it provides this size to memcpy;
3. To calculate correct padding for SKB, nla_put applies NLA_ALIGN
macro itself.

Therefore, NLA_ALIGN should not be applied to the nla_put parameter.
Otherwise it will lead to out-of-bounds memory access in memcpy.

Fixes: 4e8b86c06269 ("mqprio: Introduce new hardware offload mode and shaper in mqprio")
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: reset Tx desc base address before restarting Tx

Refer to the databook of DesignWare Cores Ethernet MAC Universal:

6.2.1.5 Register 4 (Transmit Descriptor List Address Register

If this register is not changed when the ST bit is set to 0, then
the DMA takes the descriptor address where it was stopped earlier.

The stmmac_tx_err() does zero indices to Tx descriptors, but does
not reset HW current Tx descriptor address. To fix inconsistency,
the base address of the Tx descriptors should be rewritten before
restarting Tx.

Signed-off-by: Jongsung Kim <neidhard.kim@lge.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enetc: disable EEE autoneg by default

The EEE support has not been enabled on ENETC, but it may connect
to a PHY which supports EEE and advertises EEE by default, while
its link partner also advertises EEE. If this happens, the PHY enters
low power mode when the traffic rate is low and causes packet loss.
This patch disables EEE advertisement by default for any PHY that
ENETC connects to, to prevent the above unwanted outcome.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'next' into for-linus

Prepare second round of updates for 5.5 merge window.

Merge tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm

Pull more drm updates from Dave Airlie:
"Rob pointed out I missed his pull request for msm-next, it's been in
  next for a while outside of my tree so shouldn't cause any unexpected
  issues, it has some OCMEM support in drivers/soc that is acked by
  other maintainers as it's outside my tree.

  Otherwise it's a usual fixes pull, i915, amdgpu, the main ones, with
  some tegra, omap, mgag200 and one core fix.

  Summary:

  msm-next:
   - OCMEM support for a3xx and a4xx GPUs.
   - a510 support + display support

  core:
   - mst payload deletion fix

  i915:
   - uapi alignment fix
   - fix for power usage regression due to security fixes
   - change default preemption timeout to 640ms from 100ms
   - EHL voltage level display fixes
   - TGL DGL PHY fix
   - gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning
   - CI spotted deadlock fix
   - EHL port D programming fix

  amdgpu:
   - VRAM lost fixes on BACO for CI/VI
   - navi14 DC fixes
   - misc SR-IOV, gfx10 fixes
   - XGMI fixes for arcturus
   - SRIOV fixes

  amdkfd:
   - KFD on ppc64le enabled
   - page table optimisations

  radeon:
   - fix for r1xx/2xx register checker.

  tegra:
   - displayport regression fixes
   - DMA API regression fixes

  mgag200:
   - fix devices that can't scanout except at 0 addr

  omap:
   - fix dma_addr refcounting"

* tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm: (100 commits)
  drm/dp_mst: Correct the bug in drm_dp_update_payload_part1()
  drm/omap: fix dma_addr refcounting
  drm/tegra: Run hub cleanup on ->remove()
  drm/tegra: sor: Make the +5V HDMI supply optional
  drm/tegra: Silence expected errors on IOMMU attach
  drm/tegra: vic: Export module device table
  drm/tegra: sor: Implement system suspend/resume
  drm/tegra: Use proper IOVA address for cursor image
  drm/tegra: gem: Remove premature import restrictions
  drm/tegra: gem: Properly pin imported buffers
  drm/tegra: hub: Remove bogus connection mutex check
  ia64: agp: Replace empty define with do while
  agp: Add bridge parameter documentation
  agp: remove unused variable num_segments
  agp: move AGPGART_MINOR to include/linux/miscdevice.h
  agp: remove unused variable size in agp_generic_create_gatt_table
  drm/dp_mst: Fix build on systems with STACKTRACE_SUPPORT=n
  drm/radeon: fix r1xx/r2xx register checker for POT textures
  drm/amdgpu: fix GFX10 missing CSIB set(v3)
  drm/amdgpu: should stop GFX ring in hw_fini
  ...

Merge tag 'for-linus-20191205' of git://git.kernel.dk/linux-block

Pull more block and io_uring updates from Jens Axboe:
"I wasn't expecting this to be so big, and if I was, I would have used
  separate branches for this. Going forward I'll be doing separate
  branches for the current tree, just like for the next kernel version
  tree. In any case, this contains:

   - Series from Christoph that fixes an inherent race condition with
     zoned devices and revalidation.

   - null_blk zone size fix (Damien)

   - Fix for a regression in this merge window that caused busy spins by
     sending empty disk uevents (Eric)

   - Fix for a regression in this merge window for bfq stats (Hou)

   - Fix for io_uring creds allocation failure handling (me)

   - io_uring -ERESTARTSYS send/recvmsg fix (me)

   - Series that fixes the need for applications to retain state across
     async request punts for io_uring. This one is a bit larger than I
     would have hoped, but I think it's important we get this fixed for
     5.5.

   - connect(2) improvement for io_uring, handling EINPROGRESS instead
     of having applications needing to poll for it (me)

   - Have io_uring use a hash for poll requests instead of an rbtree.
     This turned out to work much better in practice, so I think we
     should make the switch now. For some workloads, even with a fair
     amount of cancellations, the insertion sort is just too expensive.
     (me)

   - Various little io_uring fixes (me, Jackie, Pavel, LimingWu)

   - Fix for brd unaligned IO, and a warning for the future (Ming)

   - Fix for a bio integrity data leak (Justin)

   - bvec_iter_advance() improvement (Pavel)

   - Xen blkback page unmap fix (SeongJae)

  The major items in here are all well tested, and on the liburing side
  we continue to add regression and feature test cases. We're up to 50
  topic cases now, each with anywhere from 1 to more than 10 cases in
  each"

* tag 'for-linus-20191205' of git://git.kernel.dk/linux-block: (33 commits)
  block: fix memleak of bio integrity data
  io_uring: fix a typo in a comment
  bfq-iosched: Ensure bio->bi_blkg is valid before using it
  io_uring: hook all linked requests via link_list
  io_uring: fix error handling in io_queue_link_head
  io_uring: use hash table for poll command lookups
  io-wq: clear node->next on list deletion
  io_uring: ensure deferred timeouts copy necessary data
  io_uring: allow IO_SQE_* flags on IORING_OP_TIMEOUT
  null_blk: remove unused variable warning on !CONFIG_BLK_DEV_ZONED
  brd: warn on un-aligned buffer
  brd: remove max_hw_sectors queue limit
  xen/blkback: Avoid unmapping unmapped grant pages
  io_uring: handle connect -EINPROGRESS like -EAGAIN
  block: set the zone size in blk_revalidate_disk_zones atomically
  block: don't handle bio based drivers in blk_revalidate_disk_zones
  block: allocate the zone bitmaps lazily
  block: replace seq_zones_bitmap with conv_zones_bitmap
  block: simplify blkdev_nr_zones
  block: remove the empty line at the end of blk-zoned.c
  ...

Merge branch 'fixes' of git://git./linux/kernel/git/viro/vfs

Pull vfs d_inode/d_flags memory ordering fixes from Al Viro:
"Fallout from tree-wide audit for ->d_inode/->d_flags barriers use.
  Basically, the problem is that negative pinned dentries require
  careful treatment - unless ->d_lock is locked or parent is held at
  least shared, another thread can make them positive right under us.

  Most of the uses turned out to be safe - the main surprises as far as
  filesystems are concerned were

   - race in dget_parent() fastpath, that might end up with the caller
     observing the returned dentry _negative_, due to insufficient
     barriers. It is positive in memory, but we could end up seeing the
     wrong value of ->d_inode in CPU cache. Fixed.

   - manual checks that result of lookup_one_len_unlocked() is positive
     (and rejection of negatives). Again, insufficient barriers (we
     might end up with inconsistent observed values of ->d_inode and
     ->d_flags). Fixed by switching to a new primitive that does the
     checks itself and returns ERR_PTR(-ENOENT) instead of a negative
     dentry. That way we get rid of boilerplate converting negatives
     into ERR_PTR(-ENOENT) in the callers and have a single place to
     deal with the barrier-related mess - inside fs/namei.c rather than
     in every caller out there.

  The guts of pathname resolution *do* need to be careful - the race
  found by Ritesh is real, as well as several similar races.
  Fortunately, it turns out that we can take care of that with fairly
  local changes in there.

  The tree-wide audit had not been fun, and I hate the idea of repeating
  it. I think the right approach would be to annotate the places where
  we are _not_ guaranteed ->d_inode/->d_flags stability and have sparse
  catch regressions. But I'm still not sure what would be the least
  invasive way of doing that and it's clearly the next cycle fodder"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs/namei.c: fix missing barriers when checking positivity
  fix dget_parent() fastpath race
  new helper: lookup_positive_unlocked()
  fs/namei.c: pull positivity check into follow_managed()

Merge tag 'arm-soc/for-5.5/devicetree-part2' of https://github.com/Broadcom/stblinux into arm/fixes

This pull request contains the second batch of changes for Broadcom
ARM-based SoCs, please pull the following:

- Nicolas declares a CMA area within the first 1GB of DRAM in order for
  it to be guaranteed to reside there, otherwise ARM64's memory
  initialization will pick up a CMA area within ZONE_DMA32

- Stefan adds the Device Tree node for the built-in Ethernet controller
  (GENET) on the Raspberry Pi 4 model B board

* tag 'arm-soc/for-5.5/devicetree-part2' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm2711-rpi-4: Enable GENET support
  ARM: dts: bcm2711: force CMA into first GB of memory

Link: https://lore.kernel.org/r/20191118182931.11884-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.5-memory-fixes' of git://git./linux/kernel/git/tegra/linux into arm/fixes

memory: tegra: Fixes for v5.5-rc1

This contains a fix for a kernel panic that can occur on suspend if EMC
timings are not available in device tree.

* tag 'tegra-for-5.5-memory-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra30-emc: Fix panic on suspend

Link: https://lore.kernel.org/r/20191204130753.3614278-1-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.5-soc-fixes' of git://git./linux/kernel/git/tegra/linux into arm/fixes

soc/tegra: Fixes for v5.5-rc1

Fixes a regression for wake events on Tegra194 caused by the Tegra210
support that was added in v5.5-rc1 as well as wrong reset sources and
levels on Tegra194.

* tag 'tegra-for-5.5-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: pmc: Add reset sources and levels on Tegra194
  soc/tegra: pmc: Add missing IRQ callbacks on Tegra194
  soc/tegra: pmc: Use lower-case for hexadecimal literals

Link: https://lore.kernel.org/r/20191204130753.3614278-2-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.5-cpufreq' of git://git./linux/kernel/git/tegra/linux into arm/fixes

cpufreq: tegra: Changes for v5.5-rc1

Implements support for suspend/resume on Tegra124.

* tag 'tegra-for-5.5-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
cpufreq: tegra124: Add suspend and resume support

Link: https://lore.kernel.org/r/20191204130753.3614278-3-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'socfpga_update_for_v5.5' of git://git./linux/kernel/git/dinguyen/linux into arm/fixes

SoCFPGA updates for v5.5
- Issue COLD reboot by default for SoCFPGA platforms

* tag 'socfpga_update_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm: socfpga: execute cold reboot by default

Link: https://lore.kernel.org/r/20191122182106.822-1-dinguyen@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.5/dt-fixes-merge-window-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/fixes

Device tree fixes for omap variants for for v5.5 merge window

This series of changes contains fixes for few SoC and board specific
issues that would be good to have merged for v5.5-rc1:

- Fix incorrect MMC card detection polarity for omap3-tao3530

- Fix wrong am57xx-beagle-x15 pinmux named states for eMMC

- Fix dra7 cpsw mdio clock that causes wrong speed

- Fix vcsi for droid4 so it won't get turned off after init

- Fix rev and sysconfig register offsets for omap4 sgx so it can idle

Then there are also two minor late changes to logicpd-torpedo-baseboard
to configure 1-wire HDQ for battery stats, and remove out of date
workaround comments no longer needed.

* tag 'omap-for-v5.5/dt-fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Fix sgx sysconfig register for omap4
  ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangs
  ARM: dts: dra7: fix cpsw mdio fck clock
  ARM: dts: am57xx-beagle-x15: Update pinmux name to ddr_3_3v
  ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity
  ARM: dts: logicpd-torpedo: Remove unnecessary notes/comments
  ARM: dts: logicpd-torpedo-baseboard:  Enable HDQ

Link: https://lore.kernel.org/r/pull-1574870758-237468@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.5/ti-sysc-late-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/fixes

Few ti-sysc related fixes for v5.5 merge window

Just few minor changes that can be merged when suitable, but would
be good to have these in v5.5-rc1 to remove dependencies between branches
for more changes later on in v5.6:

- Add quirk handling for AESS (Audio Engine Sub System)

- We want to drop the useless gptimer option for omap4 as there are local
  timers

- A minor error path handling improvment for sysc_child_add_named_clock()
  that will make further patching a bit easier

* tag 'omap-for-v5.5/ti-sysc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Adjust exception handling in sysc_child_add_named_clock()
  ARM: OMAP2+: Drop useless gptimer option for omap4
  bus: ti-sysc: Add module enable quirk for audio AESS

Link: https://lore.kernel.org/r/pull-1574273726-31367@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: multi_v7_defconfig: Restore debugfs support

Commit fd7d58f0dbc3 ("ARM: multi_v7_defconfig: renormalize based on recent
additions") removed explicit enable line for CONFIG_DEBUG_FS, because
that feature has been selected by other enabled options: CONFIG_TRACING,
which were enabled by CONFIG_PERF_EVENTS.

In meantime, commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS
dependency") removed the dependency between CONFIG_DEBUG_FS and
CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds.

Enable it again explicitly, as debugfs support is essential for various
automated testing tools.

Link: https://lore.kernel.org/r/20191206125112.11006-1-m.szyprowski@samsung.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

arm64: entry: refine comment of stack overflow check

Stack overflow checking can be done by testing sp & (1 << THREAD_SHIFT)
only for the stacks are aligned to (2 << THREAD_SHIFT) with size of
(1 << THREAD_SIZE), and this is the case when CONFIG_VMAP_STACK is set.

Fix the code comment to avoid confusion.

Cc: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
[catalin.marinas@arm.com: Updated comment following Mark's suggestion]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: ftrace: fix ifdeffery

When I tweaked the ftrace entry assembly in commit:

3b23e4991fb66f6d ("arm64: implement ftrace with regs")

... my ifdeffery tweaks left ftrace_graph_caller undefined for
CONFIG_DYNAMIC_FTRACE && CONFIG_FUNCTION_GRAPH_TRACER when ftrace is
based on mcount.

The kbuild test robot reported that this issue is detected at link time:

| arch/arm64/kernel/entry-ftrace.o: In function `skip_ftrace_call':
| arch/arm64/kernel/entry-ftrace.S:238: undefined reference to `ftrace_graph_caller'
| arch/arm64/kernel/entry-ftrace.S:238:(.text+0x3c): relocation truncated to fit: R_AARCH64_CONDBR19 against undefined symbol
| `ftrace_graph_caller'
| arch/arm64/kernel/entry-ftrace.S:243: undefined reference to `ftrace_graph_caller'
| arch/arm64/kernel/entry-ftrace.S:243:(.text+0x54): relocation truncated to fit: R_AARCH64_CONDBR19 against undefined symbol
| `ftrace_graph_caller'

This patch fixes the ifdeffery so that the mcount version of
ftrace_graph_caller doesn't depend on CONFIG_DYNAMIC_FTRACE. At the same
time, a redundant #else is removed from the ifdeffery for the
patchable-function-entry version of ftrace_graph_caller.

Fixes: 3b23e4991fb66f6d ("arm64: implement ftrace with regs")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Torsten Duwe <duwe@lst.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: KVM: Invoke compute_layout() before alternatives are applied

compute_layout() is invoked as part of an alternative fixup under
stop_machine(). This function invokes get_random_long() which acquires a
sleeping lock on -RT which can not be acquired in this context.

Rename compute_layout() to kvm_compute_layout() and invoke it before
stop_machine() applies the alternatives. Add a __init prefix to
kvm_compute_layout() because the caller has it, too (and so the code can be
discarded after boot).

Reviewed-by: James Morse <james.morse@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: Validate tagged addresses in access_ok() called from kernel threads

__range_ok(), invoked from access_ok(), clears the tag of the user
address only if CONFIG_ARM64_TAGGED_ADDR_ABI is enabled and the thread
opted in to the relaxed ABI. The latter sets the TIF_TAGGED_ADDR thread
flag. In the case of asynchronous I/O (e.g. io_submit()), the
access_ok() may be called from a kernel thread. Since kernel threads
don't have TIF_TAGGED_ADDR set, access_ok() will fail for valid tagged
user addresses. Example from the ffs_user_copy_worker() thread:

use_mm(io_data->mm);
ret = ffs_copy_to_iter(io_data->buf, ret, &io_data->data);
unuse_mm(io_data->mm);

Relax the __range_ok() check to always untag the user address if called
in the context of a kernel thread. The user pointers would have already
been checked via aio_setup_rw() -> import_{single_range,iovec}() at the
time of the asynchronous I/O request.

Fixes: 63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI")
Cc: <stable@vger.kernel.org> # 5.4.x-
Cc: Will Deacon <will@kernel.org>
Reported-by: Evgenii Stepanov <eugenis@google.com>
Tested-by: Evgenii Stepanov <eugenis@google.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

ARM: 8947/1: Fix __arch_get_hw_counter() access to CNTVCT

__arch_get_hw_counter() should check clock_mode to see if it can access
CNTVCT. With the conversion to unified vDSO this check has been left out.

This causes on imx v6 and v7 (imx_v6_v7_defconfig) and other platforms to
hang at boot during the execution of the init process as per below:

[ 19.976852] Run /sbin/init as init process
[ 20.044931] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x00000004

Fix the problem verifying that clock_mode is set coherently before
accessing CNTVCT.

Investigated-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

ARM: 8943/1: Fix topology setup in case of CPU hotplug for CONFIG_SCHED_MC

Commit ca74b316df96 ("arm: Use common cpu_topology structure and
functions.") changed cpu_coregroup_mask() from the ARM32 specific
implementation in arch/arm/include/asm/topology.h to the one shared
with ARM64 and RISCV in drivers/base/arch_topology.c.

Currently on ARM32 (TC2 w/ CONFIG_SCHED_MC) the task scheduler setup
code (w/ CONFIG_SCHED_DEBUG) shows this during CPU hotplug:

  ERROR: groups don't span domain->span

It happens to CPUs of the cluster of the CPU which gets hot-plugged
out on scheduler domain MC.

Turns out that the shared cpu_coregroup_mask() requires that the
hot-plugged CPU is removed from the core_sibling mask via
remove_cpu_topology(). Otherwise the 'is core_sibling subset of
cpumask_of_node()' doesn't work. In this case the task scheduler has to
deal with cpumask_of_node instead of core_sibling which is wrong on
scheduler domain MC.

e.g. CPU3 hot-plugged out on TC2 [cluster0: 0,3-4 cluster1: 1-2]:

  cpu_coregroup_mask(): CPU3 cpumask_of_node=0-2,4 core_sibling=0,3-4
                                                                  ^
should be:

  cpu_coregroup_mask(): CPU3 cpumask_of_node=0-2,4 core_sibling=0,4

Add remove_cpu_topology() to __cpu_disable() to remove the CPU from the
topology masks in case of a CPU hotplug out operation.

At the same time tweak store_cpu_topology() slightly so it will call
update_siblings_masks() in case of CPU hotplug in operation via
secondary_start_kernel()->smp_store_cpu_info().

This aligns the ARM32 implementation with the ARM64 one.

Guarding remove_cpu_topology() with CONFIG_GENERIC_ARCH_TOPOLOGY is
necessary since some Arm32 defconfigs (aspeed_g5_defconfig,
milbeaut_m10v_defconfig, spear13xx_defconfig) specify an explicit

# CONFIG_ARM_CPU_TOPOLOGY is not set

w/ ./arch/arm/Kconfig: select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY

Fixes: ca74b316df96 ("arm: Use common cpu_topology structure and functions")
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Alexei Starovoitov says:

====================
pull-request: bpf 2019-12-05

The following pull-request contains BPF updates for your *net* tree.

We've added 6 non-merge commits during the last 1 day(s) which contain
a total of 14 files changed, 116 insertions(+), 37 deletions(-).

The main changes are:

1) three selftests fixes, from Stanislav.

2) one samples fix, from Jesper.

3) one verifier fix, from Yonghong.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'drm-intel-next-fixes-2019-12-05' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Includes gvt-next-fixes-2019-12-02 pull
- Fixes for CI spotted eadlock and a race condition in GEM contexts
- Fix for EHL port D programming

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205092412.GA8089@jlahtine-desk.ger.corp.intel.com

Merge branch 'io_uring-5.5' into for-linus

* io_uring-5.5:
  io_uring: fix a typo in a comment
  io_uring: hook all linked requests via link_list
  io_uring: fix error handling in io_queue_link_head
  io_uring: use hash table for poll command lookups

Merge branch 'next.autofs' of git://git./linux/kernel/git/viro/vfs

Pull autofs updates from Al Viro:
"autofs misuses checks for ->d_subdirs emptiness; the cursors are in
  the same lists, resulting in false negatives. It's not needed anyway,
  since autofs maintains counter in struct autofs_info, containing 0 for
  removed ones, 1 for live symlinks and 1 + number of children for live
  directories, which is precisely what we need for those checks.

  This series switches to use of that counter and untangles the crap
  around its uses (it needs not be atomic and there's a bunch of
  completely pointless "defensive" checks).

  This fell out of dcache_readdir work; the main point is to get rid of
  ->d_subdirs abuses in there. I've more followup cleanups, but I hadn't
  run those by Ian yet, so they can go next cycle"

* 'next.autofs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  autofs: don't bother with atomics for ino->count
  autofs_dir_rmdir(): check ino->count for deciding whether it's empty...
  autofs: get rid of pointless checks around ->count handling
  autofs_clear_leaf_automount_flags(): use ino->count instead of ->d_subdirs

Merge branch 'pipe-rework' (patches from David Howells)

Merge two fixes for the pipe rework from David Howells:
"Here are a couple of patches to fix bugs syzbot found in the pipe
  changes:

   - An assertion check will sometimes trip when polling a pipe because
     the ring size and indices used are approximate and may be being
     changed simultaneously.

     An equivalent approximate calculation was done previously, but
     without the assertion check, so I've just dropped the check. To
     make it accurate, the pipe mutex would need to be taken or the spin
     lock could be used - but usage of the spinlock would need to be
     rolled out into splice, iov_iter and other places for that.

   - The index mask and the max_usage values cannot be cached across
     pipe_wait() as F_SETPIPE_SZ could have been called during the wait.
     This can cause pipe_write() to break"

* pipe-rework:
  pipe: Fix missing mask update after pipe_wait()
  pipe: Remove assertion from pipe_poll()

pipe: Fix missing mask update after pipe_wait()

Fix pipe_write() to not cache the ring index mask and max_usage as their
values are invalidated by calling pipe_wait() because the latter
function drops the pipe lock, thereby allowing F_SETPIPE_SZ change them.
Without this, pipe_write() may subsequently miscalculate the array
indices and pipe fullness, leading to an oops like the following:

  BUG: KASAN: slab-out-of-bounds in pipe_write+0xc25/0xe10 fs/pipe.c:481
  Write of size 8 at addr ffff8880771167a8 by task syz-executor.3/7987
  ...
  CPU: 1 PID: 7987 Comm: syz-executor.3 Not tainted 5.4.0-rc2-syzkaller #0
  ...
  Call Trace:
    pipe_write+0xc25/0xe10 fs/pipe.c:481
    call_write_iter include/linux/fs.h:1895 [inline]
    new_sync_write+0x3fd/0x7e0 fs/read_write.c:483
    __vfs_write+0x94/0x110 fs/read_write.c:496
    vfs_write+0x18a/0x520 fs/read_write.c:558
    ksys_write+0x105/0x220 fs/read_write.c:611
    __do_sys_write fs/read_write.c:623 [inline]
    __se_sys_write fs/read_write.c:620 [inline]
    __x64_sys_write+0x6e/0xb0 fs/read_write.c:620
    do_syscall_64+0xca/0x5d0 arch/x86/entry/common.c:290
    entry_SYSCALL_64_after_hwframe+0x49/0xbe

This is not a problem for pipe_read() as the mask is recalculated on
each pass of the loop, after pipe_wait() has been called.

Fixes: 8cefc107ca54 ("pipe: Use head and tail pointers for the ring, not cursor and length")
Reported-by: syzbot+838eb0878ffd51f27c41@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Eric Biggers <ebiggers@kernel.org>
[ Changed it to use a temporary variable 'mask' to avoid long lines -Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pipe: Remove assertion from pipe_poll()

An assertion check was added to pipe_poll() to make sure that the ring
occupancy isn't seen to overflow the ring size. However, since no locks
are held when the three values are read, it is possible for F_SETPIPE_SZ
to intervene and muck up the calculation, thereby causing the oops.

Fix this by simply removing the assertion and accepting that the
calculation might be approximate.

Note that the previous code also had a similar issue, though there was
no assertion check, since the occupancy counter and the ring size were
not read with a lock held, so it's possible that the poll check might
have malfunctioned then too.

Also wake up all the waiters so that they can reissue their checks if
there was a competing read or write.

Fixes: 8cefc107ca54 ("pipe: Use head and tail pointers for the ring, not cursor and length")
Reported-by: syzbot+d37abaade33a934f16f2@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ppp: fix out-of-bounds access in bpf_prog_create()

sock_fprog_kern::len is in units of struct sock_filter, not bytes.

Fixes: 3e859adf3643 ("compat_ioctl: unify copy-in of ppp filters")
Reported-by: syzbot+eb853b51b10f1befa0b7@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'hns3-fixes'

Huazhong Tan says:

====================
net: hns3: fixes for -net

This patchset includes misc fixes for the HNS3 ethernet driver.

[patch 1/3] fixes a TX queue not restarted problem.

[patch 2/3] fixes a use-after-free issue.

[patch 3/3] fixes a VF ID issue for setting VF VLAN.

change log:
V1->V2: keeps 'ring' as parameter in hns3_nic_maybe_stop_tx()
in [patch 1/3], suggestted by David.
rewrites [patch 2/3]'s commit log to make it be easier
to understand, suggestted by David.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>