scsi: scsi_dh_alua: Remove check for ASC 24h in alua_rtpg()

Some arrays return ILLEGAL_REQUEST with ASC 00h if they don't support the
RTPG extended header so remove the check for INVALID FIELD IN CDB.

Link: https://lore.kernel.org/r/20210331201154.20348-1-emilne@redhat.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_dh_alua: Prevent duplicate pg info print in alua_rtpg()

Due to the frequency that alua_rtpg() is called, the path group info print
within can print the same info multiple times in the logs, subsequent
prints adding no new information or value.

To reproduce:

    # modprobe scsi_debug vpd_use_hostno=0
    # systemctl start multipathd.service

To fix, check stored values, only printing at alua attach/activate and if
any of the values change.

Link: https://lore.kernel.org/r/20210331181656.5046-1-jpittman@redhat.com
Reviewed-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: John Pittman <jpittman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Update version to 2.1.8-045

Update version.

Link: https://lore.kernel.org/r/161549387469.25025.12859568843576080076.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Add new PCI IDs

Add support for newer hardware.

Link: https://lore.kernel.org/r/161549386882.25025.2594251735886014958.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Acked-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Correct system hangs when resuming from hibernation

Correct system hangs when resuming from hibernation after first successful
hibernation/resume cycle. Rare condition involving OFA.

Note: Suspend/resume is not supported on many platforms. It was originally
intended for workstations.

Link: https://lore.kernel.org/r/161549386295.25025.14555840632114761610.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Update enclosure identifier in sysfs

Update enclosure identifier field corresponding to physical devices in
lsscsi/sysfs.

During device add the SCSI devtype is filled in during slave_configure().
However, when pqi_scsi_update_device() runs (REGNEWD) the firmware returns
zero for the SCSI devtype field, and valid devtype is overwritten by
zero. Due to this, lsscsi output shows wrong values.

Link: https://lore.kernel.org/r/161549385708.25025.17234953506918043750.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Add additional logging for LUN resets

LUN resets can take longer to complete. Adding in more driver logging helps
show where the driver is in the reset process.

Add a timeout in pqi_device_wait_for_pending_io() to cap how long the
driver will wait for outstanding commands.

Link: https://lore.kernel.org/r/161549385119.25025.10366493975709358647.stgit@brunhilda
Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Update SAS initiator_port_protocols and target_port_protocols

Export valid sas initiator_port_protocols and target_port_protocols to
sysfs. Needed for lsscsi to show correct values.

Link: https://lore.kernel.org/r/161549384532.25025.1469409935400845385.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Add phy ID support for the physical drives

Display topology using PHY numbers. PHY (both local and remote) numbers
corresponding to physical drives are read from
BMIC_IDENTIFY_PHYSICAL_DEVICE.

Link: https://lore.kernel.org/r/161549383947.25025.16977895345376485056.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Convert snprintf() to scnprintf()

The entire Linux kernel has been slowly migrating from snprintf() to
scnprintf(), so we are doing our part. This article explains the rationale
for this change:

   https: //lwn.net/Articles/69419/

Link: https://lore.kernel.org/r/161549383357.25025.12363435617789964291.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Fix driver synchronization issues

 - Synchronize OFA and controller offline events. Prevent I/O during the
   above conditions.

 - Cleanup pqi_device_wait_for_pending_io() by checking the
   device->scsi_cmds_outstanding instead of walking the device's list of
   commands.

 - Stop failing all I/O for all devices. This was causing OS to retry them,
   delaying OFA.

 - Clean up cache flush. The controller is checked for offline status in
   lower level functions.

Link: https://lore.kernel.org/r/161549382770.25025.789855864026860170.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Update device scan operations

Change return type from EINPROGRESS to EBUSY to signal applications to
retry a REGNEWD if the driver cannot process the REGNEWD. Events such as
OFA, suspend, and shutdown return EINPROGRESS if a scan is currently
running. This prevents applications from immediately retrying REGNEWD.

Schedule a new REGNEWD if system low on memory.

Link: https://lore.kernel.org/r/161549382157.25025.16054784597622125373.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Update OFA management

OFA, Online Firmware Activation, allows users to update firmware without a
reboot.

 - Change OFA setup to a worker thread

 - Delay soft resets

 - Add OFA event handler to allow FW to initiate OFA

 - Add in-memory allocation to OFA events

 - Update OFA buffer size calculations

 - Add ability to cancel OFA events

 - Update OFA quiesce/un-quiesce

 - Prevent Kernel crashes while issuing ioctl during OFA

 - Returned EBUSY for pass-through IOCTLs throughout all stages of OFA

 - Add mutex to prevent parallel OFA updates.

Link: https://lore.kernel.org/r/161549381563.25025.2647205502550052197.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Update RAID bypass handling

Simplify AIO retry management by removing retry list and list
management. Need to retry is already set in the response status. Also
remove the bypass worker thread.

Accelerated I/O requests bypass the RAID engine and go directly to either
an HBA disk or to a physical component of a RAID volume.

Link: https://lore.kernel.org/r/161549380976.25025.11776487034357231156.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Update suspend/resume and shutdown

For suspend/resume and shutdown prevent: Controller events, any new I/O
requests, controller requests, REGNEWD, and reset operations.

Wait for any pending completions from the controller to complete to avoid
controller NMI events.

Link: https://lore.kernel.org/r/161549380398.25025.12266769502766103580.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Synchronize device resets with mutex

Remove some flags used to check for device resets already in
progress. Allow only 1 reset operation at a time for the host.

Link: https://lore.kernel.org/r/161549379810.25025.10194117431886743795.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Update soft reset management for OFA

Cleanup soft reset code for Online Firmware Activation (OFA). OFA allows
controller firmware updates without a reboot.

OFA updates require an on-line controller reset to activate the updated
firmware. There were some missing actions for some of the reset cases. The
controller is first set back to sis mode before returning to pqi mode.
Check to ensure the controller is in sis mode.

Release QRM memory (OFA buffer) on OFA error conditions. Clean up
controller state which can cause a kernel panic upon reboot after an
unsuccessful OFA.

Link: https://lore.kernel.org/r/161549379215.25025.10654441314249183621.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Update event handler

Change the data types for event_id and additional_event_id.

Link: https://lore.kernel.org/r/161549378628.25025.14338046567871170916.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Add support for wwid

WWID has been added to Report Physical LUNs in newer controller
firmware. The presence of this field is detected by a feature bit. Add
detection of this new feature and store the WWID when set.

Link: https://lore.kernel.org/r/161549378041.25025.3869709982357729841.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Remove timeouts from internal cmds

Remove timeouts for driver-initiated commands. Responses to internal
requests can take longer than hard coded timeout values and the driver will
still have an outstanding request that may complete in the future with no
context.

Link: https://lore.kernel.org/r/161549377451.25025.12306492868851801623.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Disable WRITE SAME for HBA NVMe disks

Controller does not support SCSI WRITE SAME for NVMe drives in HBA mode

Link: https://lore.kernel.org/r/161549376866.25025.5961694654342018260.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Add host level stream detection enable

Allow R5/R6 stream detection to be disabled/enabled using sysfs entry
enable_stream_detection.

Example usage:

lsscsi
[2:2:0:0]    storage Adaptec  3258P-32i /e     0010
 ^
 |
 +---- NOTE: here host is host2

find /sys -name \*enable_stream\*
/sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection
/sys/devices/pci0000:5b/0000:5b:00.0/0000:5c:00.0/host3/scsi_host/host3/enable_stream_detection

Current stream detection:
cat /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection
1

Turn off stream detection:
echo 0 > /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection

Turn on stream detection:
echo 1 > /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection

Link: https://lore.kernel.org/r/161549376281.25025.1132304698441513738.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Add stream detection

Enhance performance by adding sequential stream detection for RAID5/RAID6
sequential write requests. Reduce stripe lock contention with full-stripe
write operations.

There is one common stripe lock for each RAID volume that can be set by
either the RAID engine or the AIO engine. The AIO path has I/O request
sizes well below the stripe size resulting in many Read-Modify-Write
operations.

Sending the request to the RAID engine allows for coalescing requests into
full stripe operations resulting in reduced Read-Modify-Write operations.

Link: https://lore.kernel.org/r/161549375693.25025.2962141451773219796.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Align code with oob driver

Reduce differences between out-of-box driver and kernel.org driver. No
functional changes.

Link: https://lore.kernel.org/r/161549375094.25025.9268879575316758510.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Add support for long firmware version

Add support for new "long" firmware version which requires minor driver
changes to expose.

Link: https://lore.kernel.org/r/161549374508.25025.15467221395888158022.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Add support for BMIC sense feature cmd and feature bits

Determine support for supported features from BMIC sense feature command
instead of config table. Enable features such as: RAID 1/5/6 write
support, SATA wwid, and encryption.

Link: https://lore.kernel.org/r/161549373914.25025.7999816178098103135.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Add support for RAID1 writes

Add RAID1 write IU and implement RAID1 write support. Change brand names
ADM/ADG to TRIPLE/RAID-6.

Link: https://lore.kernel.org/r/161549373324.25025.2441592111049564780.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Add support for RAID5 and RAID6 writes

Add in new IU definition and implement support for RAID5 and RAID6 writes.

Link: https://lore.kernel.org/r/161549372734.25025.963261942897080281.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Refactor scatterlist code

Factor out code common to all scatter-gather list building to prepare for
new AIO functionality. AIO (Accelerated I/O) requests go directly to disk

No functional changes.

Link: https://lore.kernel.org/r/161549372147.25025.9706613054649682229.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Refactor aio submission code

Refactor aio submission code:

    1. Break up function pqi_raid_bypass_submit_scsi_cmd()
       into smaller functions.

    2. Add common block (rmd - raid_map_data) to carry around into newly
       added functions.

    3. Prepare for new AIO functionality.

No functional changes.

Link: https://lore.kernel.org/r/161549371553.25025.8840958689316611074.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Add support for new product ids

Add support for newer hardware by adding in a product identifier. This
identifier can then be used to check for the hardware generation.

Link: https://lore.kernel.org/r/161549370966.25025.2968242206975557607.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Correct request leakage during reset operations

While failing queued I/Os in TMF path, there was a request leak and hence
stale entries in request pool with ref count being non-zero. In shutdown
path we have a BUG_ON to catch stuck I/O either in firmware or in the
driver. The stale requests caused a system crash. The I/O request pool
leakage also lead to a significant performance drop.

Link: https://lore.kernel.org/r/161549370379.25025.12793264112620796062.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Use host-wide tag space

Correct SCSI midlayer sending more requests than exposed host queue depth
causing firmware ASSERT and lockup issues by enabling host-wide tags.

Note: This also results in better performance.

Link: https://lore.kernel.org/r/161549369787.25025.8975999483518581619.stgit@brunhilda
Suggested-by: Ming Lei <ming.lei@redhat.com>
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Merge branch '5.12/scsi-fixes' into 5.13/scsi-staging

Pull 5.12/scsi-fixes into the 5.13 SCSI tree to provide a baseline for
some UFS changes that would otherwise cause conflicts during the
merge.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: message: mptlan: Replace one-element array with flexible-array member

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code
should always use "flexible array members"[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].

Refactor the code according to the use of a flexible-array member in struct
_SGE_TRANSACTION32 instead of one-element array.

Also, this helps with the ongoing efforts to enable -Warray-bounds by
fixing the following warning:

  CC [M]  drivers/message/fusion/mptlan.o
drivers/message/fusion/mptlan.c: In function ‘mpt_lan_sdu_send’:
drivers/message/fusion/mptlan.c:759:28: warning: array subscript 1 is above array bounds of ‘U32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
  759 |  pTrans->TransactionDetails[1] = cpu_to_le32((mac[2] << 24) |
      |  ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/r/20210324233344.GA99059@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: message: fusion: Replace one-element array with flexible-array member

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code
should always use "flexible array members"[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].

Also, this helps with the ongoing efforts to enable -Warray-bounds by
fixing the following warning:

drivers/message/fusion/mptbase.c: In function ‘mptbase_reply’:
drivers/message/fusion/mptbase.c:7747:62: warning: array subscript 1 is above array bounds of ‘U32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
 7747 |     ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
./include/uapi/linux/byteorder/little_endian.h:34:51: note: in definition of macro ‘__le32_to_cpu’
   34 | #define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
      |                                                   ^
drivers/message/fusion/mptbase.c:7747:33: note: in expansion of macro ‘le32_to_cpu’
 7747 |     ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
      |

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/r/20210324230036.GA67851@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fcoe: Fix mismatched fcoe_wwn_from_mac declaration

An old cleanup changed the array size from MAX_ADDR_LEN to unspecified in
the declaration, but now gcc-11 warns about this:

drivers/scsi/fcoe/fcoe_ctlr.c:1972:37: error: argument 1 of type ‘unsigned char[32]’ with mismatched bound [-Werror=array-parameter=]
 1972 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN],
      |                       ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
In file included from /git/arm-soc/drivers/scsi/fcoe/fcoe_ctlr.c:33:
include/scsi/libfcoe.h:252:37: note: previously declared as ‘unsigned char[]’
  252 | u64 fcoe_wwn_from_mac(unsigned char mac[], unsigned int, unsigned int);
      |                       ~~~~~~~~~~~~~~^~~~~

Change the type back to what the function definition uses.

Link: https://lore.kernel.org/r/20210322164702.957810-1-arnd@kernel.org
Fixes: fdd78027fd47 ("[SCSI] fcoe: cleans up libfcoe.h and adds fcoe.h for fcoe module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix gcc -Wstringop-overread warning

gcc-11 warns about an strnlen with a length larger than the size of the
passed buffer:

drivers/scsi/lpfc/lpfc_attr.c: In function 'lpfc_nvme_info_show':
drivers/scsi/lpfc/lpfc_attr.c:518:25: error: 'strnlen' specified bound 4095 exceeds source size 24 [-Werror=stringop-overread]
  518 |                         strnlen(LPFC_NVME_INFO_MORE_STR, PAGE_SIZE - 1)
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In this case, the code is entirely valid, as the string is properly
terminated, and the size argument is only there out of extra caution in
case it exceeds a page.

This cannot really happen here, so just simplify it to a sizeof().

Link: https://lore.kernel.org/r/20210322160253.4032422-10-arnd@kernel.org
Fixes: afff0d2321ea ("scsi: lpfc: Add Buffer overflow check, when nvme_info larger than PAGE_SIZE")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mvsas: Avoid -Wempty-body warning

Building with 'make W=1' shows a few harmless -Wempty-body warning for the
mvsas driver:

drivers/scsi/mvsas/mv_94xx.c: In function 'mvs_94xx_phy_reset':
drivers/scsi/mvsas/mv_94xx.c:278:63: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
  278 |                         mv_dprintk("phy hard reset failed.\n");
      |                                                               ^
drivers/scsi/mvsas/mv_sas.c: In function 'mvs_task_prep':
drivers/scsi/mvsas/mv_sas.c:723:57: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
  723 |                                 SAS_ADDR(dev->sas_addr));
      |                                                         ^

Change the empty dprintk() macros to no_printk(), which avoids this warning
and adds format string checking.

Link: https://lore.kernel.org/r/20210322103316.620694-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: message: fusion: Avoid -Wempty-body warnings

There are a couple of warnings in this driver when building with W=1:

drivers/message/fusion/mptbase.c: In function 'PrimeIocFifos':
drivers/message/fusion/mptbase.c:4608:65: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
 4608 |                     "restoring 64 bit addressing\n", ioc->name));
      |                                                                 ^
drivers/message/fusion/mptbase.c:4633:65: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
 4633 |                     "restoring 64 bit addressing\n", ioc->name));

The macros are slightly suboptimal since are not proper statements.
Change both versions to the usual "do { ... } while (0)" style to
make them more robust and avoid the warning.

Link: https://lore.kernel.org/r/20210322102549.278661-2-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aic94xx: Avoid -Wempty-body warning

Building with 'make W=1' shows a harmless -Wempty-body warning:

drivers/scsi/aic94xx/aic94xx_init.c: In function 'asd_free_queues':
drivers/scsi/aic94xx/aic94xx_init.c:858:62: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
  858 |                 ASD_DPRINTK("Uh-oh! Pending is not empty!\n");

Change the empty ASD_DPRINTK() macro to no_printk(), which avoids this
warning and adds format string checking.

Link: https://lore.kernel.org/r/20210322102549.278661-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: myrs: Make symbols DAC960_{GEM/BA/LP}_privdata static

This symbol is not used outside of myrs.c, so we can mark it static.

Link: https://lore.kernel.org/r/20210327073157.1786772-1-liushixin2@huawei.com
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: myrb: Make symbols DAC960_{LA/PG/PD/P}_privdata static

This symbol is not used outside of myrb.c, so we can mark it static.

Link: https://lore.kernel.org/r/20210327073156.1786722-1-liushixin2@huawei.com
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: advansys: Fix spelling of 'is'

s/isi/is/

Link: https://lore.kernel.org/r/20210326030412.1656-1-qiumibaozi_1@163.com
Signed-off-by: ganjisheng <ganjisheng@yulong.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: a100u2w: Remove unused variable biosaddr

The variable biosaddr is being assigned a value that is never read, the
variable is redundant and can be safely removed.

Link: https://lore.kernel.org/r/20210325170731.484651-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: scsi_host_cmd_pool is declared twice

struct scsi_host_cmd_pool has already been declared. Remove the duplicate.

Link: https://lore.kernel.org/r/20210325064632.855002-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedi: Remove redundant assignment to variable err

Variable err is assigned -ENOMEM followed by an error return path via label
err_udev that does not access the variable and returns with the -ENOMEM
error return code. The assignment to err is redundant and can be removed.

Link: https://lore.kernel.org/r/20210327230650.25803-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Remove duplicate declarations

struct request and struct request_queue are declared twice.  Remove the
duplicate declarations.

Link: https://lore.kernel.org/r/20210327030850.918018-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Fix comment typo

s/remoed/removed/

Link: https://lore.kernel.org/r/20210326060902.1851811-1-pinganddu90@gmail.com
Signed-off-by: dudengke <dengke.du@ucas.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Remove bogus ratelimit messages

Commit b43abcbbd5b1 ("scsi: fnic: Ratelimit printks to avoid flooding when
vlan is not set by the switch.i") added printk_ratelimit() in front of a
couple of debug-mode messages to reduce logging overrun when debugging the
driver. The code:

>           if (printk_ratelimit())
>                   FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
>                             "Start VLAN Discovery\n");

ends up calling printk_ratelimit() quite often, triggering many kernel
messages about callbacks being supressed.

The fix is to decompose FNIC_FCS_DBG(), then change the order of checks so
that printk_ratelimit() is only called if driver debugging is enabled.

Link: https://lore.kernel.org/r/20210323172756.5743-1-lduncan@suse.com
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Update version to 10.02.00.106-k

Link: https://lore.kernel.org/r/20210329085229.4367-13-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Do logout even if fabric scan retries got exhausted

Perform logout of all remote ports so that all I/Os with driver are
requeued with midlayer for retry.

Link: https://lore.kernel.org/r/20210329085229.4367-12-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Update default AER debug mask

Use PCIe AER debug mask as default.

Link: https://lore.kernel.org/r/20210329085229.4367-11-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix mailbox recovery during PCIe error

For the mailbox thread that encounters a PCIe error, pause that thread
until PCIe link reset/recovery has completed to prevent the thread from
possibly unmapping any type of DMA resource that might be in progress.

Link: https://lore.kernel.org/r/20210329085229.4367-10-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix crash in PCIe error handling

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: qla2x00_abort_isp+0x21/0x6b0 [qla2xxx] PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 1715 Comm: kworker/0:2
Tainted: GOE 4.12.14-122.37-default #1 SLE12-SP5
Hardware name: HPE Superdome Flex/Superdome Flex, BIOS
Bundle:3.30.100 SFW:IP147.007.004.017.000.2009211957 09/21/2020
Workqueue: events aer_recover_work_func
task: ffff9e399c14ca80 task.stack: ffffc1c58e4ac000
RIP: 0010:qla2x00_abort_isp+0x21/0x6b0 [qla2xxx]
RSP: 0018:ffffc1c58e4afd50 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff9e419cdef480 RCX: 0000000000000000
RDX: ffff9e399c14ca80 RSI: 0000000000000246 RDI: ffff9e419bbc27b8
RBP: ffff9e419bbc27b8 R08: 0000000000000004 R09: 00000000a0440000
R10: 0000000000000000 R11: ffff9e399416d1a0 R12: ffff9e419cdef000
R13: ffff9e3a7cfae800 R14: ffff9e3a7cfae800 R15: 00000000000000c0
FS:  0000000000000000(0000) GS:ffff9e39a0000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000006cd00a005 CR4: 00000000007606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
  qla2xxx_pci_slot_reset+0x141/0x160 [qla2xxx]
  report_slot_reset+0x41/0x80
  ? merge_result.part.4+0x30/0x30
  pci_walk_bus+0x70/0x90
  pcie_do_recovery+0x1db/0x2e0
  aer_recover_work_func+0xc2/0xf0
  process_one_work+0x14c/0x390

Disable board_disable logic where driver resources are freed while OS is in
the process of recovering the adapter.

Link: https://lore.kernel.org/r/20210329085229.4367-9-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix RISC RESET completion polling

After RISC RESET, the poll time for completion is too short. Fix the
completion polling time.

Link: https://lore.kernel.org/r/20210329085229.4367-8-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix crash in qla2xxx_mqueuecommand()

    RIP: 0010:kmem_cache_free+0xfa/0x1b0
    Call Trace:
       qla2xxx_mqueuecommand+0x2b5/0x2c0 [qla2xxx]
       scsi_queue_rq+0x5e2/0xa40
       __blk_mq_try_issue_directly+0x128/0x1d0
       blk_mq_request_issue_directly+0x4e/0xb0

Fix incorrect call to free srb in qla2xxx_mqueuecommand(), as srb is now
allocated by upper layers. This fixes smatch warning of srb unintended
free.

Link: https://lore.kernel.org/r/20210329085229.4367-7-njavali@marvell.com
Fixes: af2a0c51b120 ("scsi: qla2xxx: Fix SRB leak on switch command timeout")
Cc: stable@vger.kernel.org # 5.5
Reported-by: Laurence Oberman <loberman@redhat.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix use after free in bsg

On bsg command completion, bsg_job_done() was called while qla driver
continued to access the bsg_job buffer. bsg_job_done() would free up
resources that ended up being reused by other task while the driver
continued to access the buffers. As a result, driver was reading garbage
data.

localhost kernel: BUG: KASAN: use-after-free in sg_next+0x64/0x80
localhost kernel: Read of size 8 at addr ffff8883228a3330 by task swapper/26/0
localhost kernel:
localhost kernel: CPU: 26 PID: 0 Comm: swapper/26 Kdump:
loaded Tainted: G          OE    --------- -  - 4.18.0-193.el8.x86_64+debug #1
localhost kernel: Hardware name: HP ProLiant DL360
Gen9/ProLiant DL360 Gen9, BIOS P89 08/12/2016
localhost kernel: Call Trace:
localhost kernel: <IRQ>
localhost kernel: dump_stack+0x9a/0xf0
localhost kernel: print_address_description.cold.3+0x9/0x23b
localhost kernel: kasan_report.cold.4+0x65/0x95
localhost kernel: debug_dma_unmap_sg.part.12+0x10d/0x2d0
localhost kernel: qla2x00_bsg_sp_free+0xaf6/0x1010 [qla2xxx]

Link: https://lore.kernel.org/r/20210329085229.4367-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Consolidate zio threshold setting for both FCP & NVMe

Consolidate zio threshold setting for both FCP & NVMe to prevent one
protocol from clobbering the setting of the other protocol.

Link: https://lore.kernel.org/r/20210329085229.4367-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix stuck session

Session was stuck due to explicit logout to target timing out.  The target
was in an unresponsive state. This timeout induced an error to the GNL
command from moving forward.

Link: https://lore.kernel.org/r/20210329085229.4367-4-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Add H:C:T info in the log message for fc ports

The host:channel:scsi_target_id information is helpful in matching an FC
port with a SCSI device, so add it. For initiator FC ports, a -1 would be
displayed for "target" part.

Link: https://lore.kernel.org/r/20210329085229.4367-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix IOPS drop seen in some adapters

Removing the response queue processing in the send path is showing IOPS
drop. Add back the process_response_queue() call in the send path.

Link: https://lore.kernel.org/r/20210329085229.4367-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: iscsi: Fix race condition between login and sync thread

A kernel panic was observed due to a timing issue between the sync thread
and the initiator processing a login response from the target. The session
reopen can be invoked both from the session sync thread when iscsid
restarts and from iscsid through the error handler. Before the initiator
receives the response to a login, another reopen request can be sent from
the error handler/sync session. When the initial login response is
subsequently processed, the connection has been closed and the socket has
been released.

To fix this a new connection state, ISCSI_CONN_BOUND, is added:

 - Set the connection state value to ISCSI_CONN_DOWN upon
   iscsi_if_ep_disconnect() and iscsi_if_stop_conn()

 - Set the connection state to the newly created value ISCSI_CONN_BOUND
   after bind connection (transport->bind_conn())

 - In iscsi_set_param(), return -ENOTCONN if the connection state is not
   either ISCSI_CONN_BOUND or ISCSI_CONN_UP

Link: https://lore.kernel.org/r/20210325093248.284678-1-gulam.mohamed@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Gulam Mohamed <gulam.mohamed@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
index 91074fd97f64..f4bf62b007a0 100644

scsi: target: pscsi: Clean up after failure in pscsi_map_sg()

If pscsi_map_sg() fails, make sure to drop references to already allocated
bios.

Link: https://lore.kernel.org/r/20210323212431.15306-2-mwilck@suse.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: pscsi: Avoid OOM in pscsi_map_sg()

pscsi_map_sg() uses the variable nr_pages as a hint for bio_kmalloc() how
many vector elements to allocate. If nr_pages is < BIO_MAX_PAGES, it will
be reset to 0 after successful allocation of the bio.

If bio_add_pc_page() fails later for whatever reason, pscsi_map_sg() tries
to allocate another bio, passing nr_vecs = 0. This causes bio_add_pc_page()
to fail immediately in the next call. pci_map_sg() continues to allocate
zero-length bios until memory is exhausted and the kernel crashes with
OOM. This can be easily observed by exporting a SATA DVD drive via pscsi.
The target crashes as soon as the client tries to access the DVD LUN. In
the case I analyzed, bio_add_pc_page() would fail because the DVD device's
max_sectors_kb (128) was exceeded.

Avoid this by simply not resetting nr_pages to 0 after allocating the
bio. This way, the client receives an I/O error when it tries to send
requests exceeding the devices max_sectors_kb, and eventually gets it
right. The client must still limit max_sectors_kb e.g. by an udev rule if
(like in my case) the driver doesn't report valid block limits, otherwise
it encounters I/O errors.

Link: https://lore.kernel.org/r/20210323212431.15306-1-mwilck@suse.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Avoid -Wrestrict warning

On some configurations, gcc warns about overlapping source and destination
arguments to snprintf:

drivers/scsi/pm8001/pm8001_init.c: In function 'pm8001_request_msix':
drivers/scsi/pm8001/pm8001_init.c:977:3: error: 'snprintf' argument 4 may overlap destination object 'pm8001_ha' [-Werror=restrict]
  977 |   snprintf(drvname, len, "%s-%d", pm8001_ha->name, i);
      |   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/pm8001/pm8001_init.c:962:56: note: destination object referenced by 'restrict'-qualified argument 1 was declared here
  962 | static u32 pm8001_request_msix(struct pm8001_hba_info *pm8001_ha)
      |                                ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~

I first assumed this was a gcc bug, as that should not happen, but a
reduced test case makes it clear that this happens when the loop counter is
not bounded by the array size.

Help the compiler out by adding an explicit limit here to make the code
slightly more robust and avoid the warning.

Link: https://godbolt.org/z/6T1qPM
Link: https://lore.kernel.org/r/20210323125458.1825564-1-arnd@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix a typo

s/conditons/conditions/

Link: https://lore.kernel.org/r/20210324064829.32092-1-unixbhaskar@gmail.com
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: esp_scsi: Trivial typo fixes

s/conditon/condition/
s/pecularity/peculiarity/

Link: https://lore.kernel.org/r/20210324061318.5744-1-unixbhaskar@gmail.com
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Fix a typo in two places

s/defintions/definitions/  ....two different places.

Link: https://lore.kernel.org/r/20210322205821.1449844-1-unixbhaskar@gmail.com
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix a typo

Change 'lenth' to 'length'.

Link: https://lore.kernel.org/r/20210322075645.25636-1-samirweng1979@163.com
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_dh: Fix a typo

s/infrastruture/infrastructure/

[mkp: combined .c and .h patches]

Link: https://lore.kernel.org/r/20210322064724.4108343-1-unixbhaskar@gmail.com
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
frog

scsi: bnx2fc: Fix a typo

s/struture/structure/

Link: https://lore.kernel.org/r/20210322063530.3588282-1-unixbhaskar@gmail.com
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Fix a typo

s/encloure/enclosure/

Link: https://lore.kernel.org/r/20210322032145.2242520-1-unixbhaskar@gmail.com
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: csiostor: Fix a typo

s/boudaries/boundaries/

Link: https://lore.kernel.org/r/20210319092311.31776-1-unixbhaskar@gmail.com
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Remove unnecessary NULL checks in ufshcd_find_max_sup_active_icc_level()

vcc/vccq/vccq2 have already been NULL checked at this point in
ufshcd_find_max_sup_active_icc_level().

Link: https://lore.kernel.org/r/20210319070916.2254-1-zbestahu@gmail.com
Signed-off-by: Yue Hu <huyue2@yulong.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Fix warning comparing pointer to 0

Fix the following coccicheck warning:

./drivers/scsi/bfa/bfad_bsg.c:3412:29-30: WARNING comparing pointer to
0.

Link: https://lore.kernel.org/r/1615880930-120780-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla1280: Fix warning comparing pointer to 0

Fix the following coccicheck warning:

./drivers/scsi/qla1280.c:3057:37-38: WARNING comparing pointer to 0.

Link: https://lore.kernel.org/r/1615780159-94708-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvscsi: Remove unnecessary cast

Fix the following coccicheck warning:
WARNING: casting value returned by memory allocation function is useless.

Link: https://lore.kernel.org/r/1615515534-1250-1-git-send-email-wangqing@vivo.com
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fnic: Remove unnecessary cast

Fix the following coccicheck warning:
WARNING: casting value returned by memory allocation function is useless.

Link: https://lore.kernel.org/r/1615515500-946-1-git-send-email-wangqing@vivo.com
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: message: fusion: Remove unnecessary cast

Fix the following coccicheck warning:
WARNING: casting value returned by memory allocation function is useless.

Link: https://lore.kernel.org/r/1615515483-777-1-git-send-email-wangqing@vivo.com
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-exynos: Remove pwr_max from parameter list of exynos_ufs_post_pwr_mode()

pwr_max is unused, remove it.

Link: https://lore.kernel.org/r/20210311042833.1381-1-zbestahu@gmail.com
Signed-off-by: Yue Hu <huyue2@yulong.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: core: Correct status type in ufshcd_vops_pwr_change_notify()

The status parameter's type should be enum ufs_notify_change_status.

Link: https://lore.kernel.org/r/20210311040210.1315-1-zbestahu@gmail.com
Signed-off-by: Yue Hu <huyue2@yulong.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bnx2i: Make bnx2i_process_iscsi_error() simpler and more robust

Instead of strcpy'ing into a stack buffer, just let additional_notice point
to a string literal living in .rodata. This is better in a few ways:

 - Smaller .text - instead of gcc compiling the strcpys as a bunch of
   immediate stores (effectively encoding the string literal in the
   instruction stream), we only pay the price of storing the literal in
   .rodata.

 - Faster, because there's no string copying.

 - Smaller stack usage (with my compiler, 72 bytes instead of 176 for the
   sole caller, bnx2i_indicate_kcqe)

Moreover, it's currently possible for additional_notice[] to get used
uninitialized, so some random stack garbage would be passed to printk() -
in the worst case without any '\0' anywhere in those 64 bytes. That could
be fixed by initializing additional_notice[0], but the same is achieved
here by initializing the new pointer variable to "".

Also give the message pointer a similar treatment - there's no point making
temporary copies on the stack of those two strings.

Link: https://lore.kernel.org/r/20210310221602.2494422-1-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mac53c94: Fix warning comparing pointer to 0

Fix the following coccicheck warning:

./drivers/scsi/mac53c94.c:470:29-30: WARNING comparing pointer to 0.
./drivers/scsi/mac53c94.c:349:12-13: WARNING comparing pointer to 0.

Link: https://lore.kernel.org/r/1615349771-81106-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: dc395x: Use bitwise instead of arithmetic operator for flags

Fix the following coccicheck warnings:

./drivers/scsi/dc395x.c:2921:28-29: WARNING: sum of probable bitmasks,
consider |.

Link: https://lore.kernel.org/r/1615261153-32647-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Fix error return code of mpt3sas_base_attach()

When kzalloc() returns NULL, no error return code of mpt3sas_base_attach()
is assigned. To fix this bug, r is assigned with -ENOMEM in this case.

Link: https://lore.kernel.org/r/20210308035241.3288-1-baijiaju1990@gmail.com
Fixes: c696f7b83ede ("scsi: mpt3sas: Implement device_remove_in_progress check in IOCTL path")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedi: Fix error return code of qedi_alloc_global_queues()

When kzalloc() returns NULL to qedi->global_queues[i], no error return code
of qedi_alloc_global_queues() is assigned.  To fix this bug, status is
assigned with -ENOMEM in this case.

Link: https://lore.kernel.org/r/20210308033024.27147-1-baijiaju1990@gmail.com
Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Check kzalloc() return value

Instead of crashing if kzalloc() fails, make qla2x00_get_host_stats()
return -ENOMEM.

Link: https://lore.kernel.org/r/20210320232359.941-8-bvanassche@acm.org
Fixes: dbf1f53cfd23 ("scsi: qla2xxx: Implementation to get and manage host, target stats and initiator port")
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Saurav Kashyap <skashyap@marvell.com>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Lee Duncan <lduncan@suse.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Always check the return value of qla24xx_get_isp_stats()

This patch fixes the following Coverity warning:

    CID 361199 (#1 of 1): Unchecked return value (CHECKED_RETURN)
    3. check_return: Calling qla24xx_get_isp_stats without checking return
    value (as is done elsewhere 4 out of 5 times).

Link: https://lore.kernel.org/r/20210320232359.941-7-bvanassche@acm.org
Cc: Quinn Tran <qutran@marvell.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Lee Duncan <lduncan@suse.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Simplify qla8044_minidump_process_control()

This patch fixes the following Coverity complaint:

    CID 177490 (#1 of 1): Unused value (UNUSED_VALUE)
    assigned_value: Assigning value from opcode & 0xffffff7fU to opcode
    here, but that stored value is overwritten before it can be used.

Link: https://lore.kernel.org/r/20210320232359.941-6-bvanassche@acm.org
Cc: Quinn Tran <qutran@marvell.com>
Cc: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Suppress Coverity complaints about dseg_r*

Change dseq_rq and dseg_rsp from scalar structure members into
single-element arrays such that Coverity does not complain about the
(*cur_dsd)++ statement in append_dsd64().

Link: https://lore.kernel.org/r/20210320232359.941-5-bvanassche@acm.org
Cc: Quinn Tran <qutran@marvell.com>
Cc: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix endianness annotations

Fix all recently introduced endianness annotation issues.

Link: https://lore.kernel.org/r/20210320232359.941-4-bvanassche@acm.org
Cc: Quinn Tran <qutran@marvell.com>
Cc: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Constify struct qla_tgt_func_tmpl

Since the target function pointers are not modified at runtime, declare the
data structure with the target function pointers const.

Link: https://lore.kernel.org/r/20210320232359.941-3-bvanassche@acm.org
Cc: Quinn Tran <qutran@marvell.com>
Cc: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: Revert "qla2xxx: Make sure that aborted commands are freed"

Calling vha->hw->tgt.tgt_ops->free_cmd() from qlt_xmit_response() is wrong
since the command for which a response is sent must remain valid until the
SCSI target core calls .release_cmd(). It has been observed that the
following scenario triggers a kernel crash:

 - qlt_xmit_response() calls qlt_check_reserve_free_req()

 - qlt_check_reserve_free_req() returns -EAGAIN

 - qlt_xmit_response() calls vha->hw->tgt.tgt_ops->free_cmd(cmd)

 - transport_handle_queue_full() tries to retransmit the response

Fix this crash by reverting the patch that introduced it.

Link: https://lore.kernel.org/r/20210320232359.941-2-bvanassche@acm.org
Fixes: 0dcec41acb85 ("scsi: qla2xxx: Make sure that aborted commands are freed")
Cc: Quinn Tran <qutran@marvell.com>
Cc: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Make ibmvfc_wait_for_ops() MQ aware

During MQ enablement of the ibmvfc driver ibmvfc_wait_for_ops() was
missed. This function is responsible for waiting on commands to complete
that match a certain criteria such as LUN or cancel key. The implementation
as is only scans the CRQ for events ignoring any sub-queues and as a result
will exit successfully without doing anything when operating in MQ
channelized mode.

Check the MQ and channel use flags to determine which queues are
applicable, and scan each queue accordingly. Note in MQ mode SCSI commands
are only issued down sub-queues and the CRQ is only used for driver
specific management commands. As such the CRQ events are ignored when
operating in MQ mode with channels.

Link: https://lore.kernel.org/r/20210319205029.312969-3-tyreld@linux.ibm.com
Fixes: 9000cb998bcf ("scsi: ibmvfc: Enable MQ and set reasonable defaults")
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Fix potential race in ibmvfc_wait_for_ops()

For various EH activities the ibmvfc driver uses ibmvfc_wait_for_ops() to
wait for the completion of commands that match a given criteria be it
cancel key, or specific LUN. With recent changes commands are completed
outside the lock in bulk by removing them from the sent list and adding
them to a private completion list. This introduces a potential race in
ibmvfc_wait_for_ops() since the criteria for a command to be outstanding is
no longer simply being on the sent list, but instead not being on the free
list.

Avoid this race by scanning the entire command event pool and checking that
any matching command that ibmvfc needs to wait on is not already on the
free list.

Link: https://lore.kernel.org/r/20210319205029.312969-2-tyreld@linux.ibm.com
Fixes: 1f4a4a19508d ("scsi: ibmvfc: Complete commands outside the host/queue lock")
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvscsi_tgt: Remove duplicate section 'NOTE'

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:136: warning: duplicate section name 'NOTE'

Link: https://lore.kernel.org/r/20210317091230.2912389-36-lee.jones@linaro.org
Cc: Michael Cyr <mikecyr@linux.ibm.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Dave Boutcher <boutcher@us.ibm.com>
Cc: Santiago Leon <santil@us.ibm.com>
Cc: Linda Xie <lxie@us.ibm.com>
Cc: FUJITA Tomonori <tomof@acm.org>
Cc: "Nicholas A. Bellinger" <nab@kernel.org>
Cc: "Bryant G. Ly" <bryantly@linux.vnet.ibm.com>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvscsi: Fix a bunch of misdocumentation

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/ibmvscsi/ibmvfc.c:331: warning: Function parameter or member 'vhost' not described in 'ibmvfc_get_err_result'
 drivers/scsi/ibmvscsi/ibmvfc.c:653: warning: Excess function parameter 'job_step' description in 'ibmvfc_del_tgt'
 drivers/scsi/ibmvscsi/ibmvfc.c:773: warning: Function parameter or member 'queue' not described in 'ibmvfc_init_event_pool'
 drivers/scsi/ibmvscsi/ibmvfc.c:773: warning: Function parameter or member 'size' not described in 'ibmvfc_init_event_pool'
 drivers/scsi/ibmvscsi/ibmvfc.c:823: warning: Function parameter or member 'queue' not described in 'ibmvfc_free_event_pool'
 drivers/scsi/ibmvscsi/ibmvfc.c:1413: warning: Function parameter or member 'vhost' not described in 'ibmvfc_gather_partition_info'
 drivers/scsi/ibmvscsi/ibmvfc.c:1483: warning: Function parameter or member 'queue' not described in 'ibmvfc_get_event'
 drivers/scsi/ibmvscsi/ibmvfc.c:1483: warning: Excess function parameter 'vhost' description in 'ibmvfc_get_event'
 drivers/scsi/ibmvscsi/ibmvfc.c:1630: warning: Function parameter or member 't' not described in 'ibmvfc_timeout'
 drivers/scsi/ibmvscsi/ibmvfc.c:1630: warning: Excess function parameter 'evt' description in 'ibmvfc_timeout'
 drivers/scsi/ibmvscsi/ibmvfc.c:1893: warning: Function parameter or member 'shost' not described in 'ibmvfc_queuecommand'
 drivers/scsi/ibmvscsi/ibmvfc.c:1893: warning: Excess function parameter 'done' description in 'ibmvfc_queuecommand'
 drivers/scsi/ibmvscsi/ibmvfc.c:2324: warning: Function parameter or member 'rport' not described in 'ibmvfc_match_rport'
 drivers/scsi/ibmvscsi/ibmvfc.c:2324: warning: Excess function parameter 'device' description in 'ibmvfc_match_rport'
 drivers/scsi/ibmvscsi/ibmvfc.c:3133: warning: Function parameter or member 'evt_doneq' not described in 'ibmvfc_handle_crq'
 drivers/scsi/ibmvscsi/ibmvfc.c:3317: warning: Excess function parameter 'reason' description in 'ibmvfc_change_queue_depth'
 drivers/scsi/ibmvscsi/ibmvfc.c:3390: warning: Function parameter or member 'attr' not described in 'ibmvfc_show_log_level'
 drivers/scsi/ibmvscsi/ibmvfc.c:3413: warning: Function parameter or member 'attr' not described in 'ibmvfc_store_log_level'
 drivers/scsi/ibmvscsi/ibmvfc.c:3413: warning: Function parameter or member 'count' not described in 'ibmvfc_store_log_level'
 drivers/scsi/ibmvscsi/ibmvfc.c:4121: warning: Function parameter or member 'done' not described in '__ibmvfc_tgt_get_implicit_logout_evt'
 drivers/scsi/ibmvscsi/ibmvfc.c:4438: warning: Function parameter or member 't' not described in 'ibmvfc_adisc_timeout'
 drivers/scsi/ibmvscsi/ibmvfc.c:4438: warning: Excess function parameter 'tgt' description in 'ibmvfc_adisc_timeout'
 drivers/scsi/ibmvscsi/ibmvfc.c:4641: warning: Function parameter or member 'target' not described in 'ibmvfc_alloc_target'
 drivers/scsi/ibmvscsi/ibmvfc.c:4641: warning: Excess function parameter 'scsi_id' description in 'ibmvfc_alloc_target'
 drivers/scsi/ibmvscsi/ibmvfc.c:5068: warning: Function parameter or member 'evt' not described in 'ibmvfc_npiv_logout_done'
 drivers/scsi/ibmvscsi/ibmvfc.c:5068: warning: Excess function parameter 'vhost' description in 'ibmvfc_npiv_logout_done'

Link: https://lore.kernel.org/r/20210317091230.2912389-35-lee.jones@linaro.org
Cc: Tyrel Datwyler <tyreld@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Cc: linux-scsi@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvscsi: Fix a bunch of kernel-doc related issues

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/ibmvscsi/ibmvscsi.c:143: warning: Function parameter or member 'hostdata' not described in 'ibmvscsi_release_crq_queue'
 drivers/scsi/ibmvscsi/ibmvscsi.c:143: warning: Function parameter or member 'max_requests' not described in 'ibmvscsi_release_crq_queue'
 drivers/scsi/ibmvscsi/ibmvscsi.c:143: warning: expecting prototype for release_crq_queue(). Prototype was for ibmvscsi_release_crq_queue() instead
 drivers/scsi/ibmvscsi/ibmvscsi.c:286: warning: expecting prototype for reset_crq_queue(). Prototype was for ibmvscsi_reset_crq_queue() instead
 drivers/scsi/ibmvscsi/ibmvscsi.c:328: warning: Function parameter or member 'max_requests' not described in 'ibmvscsi_init_crq_queue'
 drivers/scsi/ibmvscsi/ibmvscsi.c:328: warning: expecting prototype for initialize_crq_queue(). Prototype was for ibmvscsi_init_crq_queue() instead
 drivers/scsi/ibmvscsi/ibmvscsi.c:414: warning: expecting prototype for reenable_crq_queue(). Prototype was for ibmvscsi_reenable_crq_queue() instead
 drivers/scsi/ibmvscsi/ibmvscsi.c:536: warning: expecting prototype for ibmvscsi_free(). Prototype was for free_event_struct() instead
 drivers/scsi/ibmvscsi/ibmvscsi.c:558: warning: expecting prototype for get_evt_struct(). Prototype was for get_event_struct() instead
 drivers/scsi/ibmvscsi/ibmvscsi.c:587: warning: Function parameter or member 'evt_struct' not described in 'init_event_struct'
 drivers/scsi/ibmvscsi/ibmvscsi.c:587: warning: Excess function parameter 'evt' description in 'init_event_struct'
 drivers/scsi/ibmvscsi/ibmvscsi.c:608: warning: Function parameter or member 'cmd' not described in 'set_srp_direction'
 drivers/scsi/ibmvscsi/ibmvscsi.c:608: warning: Function parameter or member 'srp_cmd' not described in 'set_srp_direction'
 drivers/scsi/ibmvscsi/ibmvscsi.c:608: warning: Function parameter or member 'numbuf' not described in 'set_srp_direction'
 drivers/scsi/ibmvscsi/ibmvscsi.c:641: warning: Function parameter or member 'evt_struct' not described in 'unmap_cmd_data'
 drivers/scsi/ibmvscsi/ibmvscsi.c:683: warning: Function parameter or member 'evt_struct' not described in 'map_sg_data'
 drivers/scsi/ibmvscsi/ibmvscsi.c:757: warning: Function parameter or member 'evt_struct' not described in 'map_data_for_srp_cmd'
 drivers/scsi/ibmvscsi/ibmvscsi.c:783: warning: Function parameter or member 'error_code' not described in 'purge_requests'
 drivers/scsi/ibmvscsi/ibmvscsi.c:846: warning: Function parameter or member 't' not described in 'ibmvscsi_timeout'
 drivers/scsi/ibmvscsi/ibmvscsi.c:846: warning: Excess function parameter 'evt_struct' description in 'ibmvscsi_timeout'
 drivers/scsi/ibmvscsi/ibmvscsi.c:1043: warning: Function parameter or member 'cmnd' not described in 'ibmvscsi_queuecommand_lck'
 drivers/scsi/ibmvscsi/ibmvscsi.c:1043: warning: expecting prototype for ibmvscsi_queue(). Prototype was for ibmvscsi_queuecommand_lck() instead
 drivers/scsi/ibmvscsi/ibmvscsi.c:1351: warning: expecting prototype for init_host(). Prototype was for enable_fast_fail() instead
 drivers/scsi/ibmvscsi/ibmvscsi.c:1464: warning: Function parameter or member 'hostdata' not described in 'init_adapter'
 drivers/scsi/ibmvscsi/ibmvscsi.c:1475: warning: Function parameter or member 'evt_struct' not described in 'sync_completion'
 drivers/scsi/ibmvscsi/ibmvscsi.c:1488: warning: Function parameter or member 'cmd' not described in 'ibmvscsi_eh_abort_handler'
 drivers/scsi/ibmvscsi/ibmvscsi.c:1488: warning: expecting prototype for ibmvscsi_abort(). Prototype was for ibmvscsi_eh_abort_handler() instead
 drivers/scsi/ibmvscsi/ibmvscsi.c:1627: warning: Function parameter or member 'cmd' not described in 'ibmvscsi_eh_device_reset_handler'
 drivers/scsi/ibmvscsi/ibmvscsi.c:1893: warning: Excess function parameter 'reason' description in 'ibmvscsi_change_queue_depth'
 drivers/scsi/ibmvscsi/ibmvscsi.c:2221: warning: Function parameter or member 'vdev' not described in 'ibmvscsi_probe'
 drivers/scsi/ibmvscsi/ibmvscsi.c:2221: warning: Function parameter or member 'id' not described in 'ibmvscsi_probe'
 drivers/scsi/ibmvscsi/ibmvscsi.c:2221: warning: expecting prototype for Called by bus code for each adapter(). Prototype was for ibmvscsi_probe() instead
 drivers/scsi/ibmvscsi/ibmvscsi.c:2381: warning: cannot understand function prototype: 'const struct vio_device_id ibmvscsi_device_table[] = '

[mkp: fix checkpatch whitespace warning]

Link: https://lore.kernel.org/r/20210317091230.2912389-34-lee.jones@linaro.org
Cc: Tyrel Datwyler <tyreld@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Colin DeVilbiss <devilbis@us.ibm.com>
Cc: Santiago Leon <santil@us.ibm.com>
Cc: Dave Boutcher <sleddog@us.ibm.com>
Cc: linux-scsi@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: cxlflash: Fix some misnaming related doc-rot

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/cxlflash/vlun.c:48: warning: Function parameter or member 'release' not described in 'marshal_clone_to_rele'
 drivers/scsi/cxlflash/vlun.c:48: warning: Excess function parameter 'rele' description in 'marshal_clone_to_rele'
 drivers/scsi/cxlflash/vlun.c:238: warning: Function parameter or member 'bali' not described in 'validate_alloc'
 drivers/scsi/cxlflash/vlun.c:238: warning: Excess function parameter 'ba_lun_info' description in 'validate_alloc'
 drivers/scsi/cxlflash/vlun.c:308: warning: Function parameter or member 'to_clone' not described in 'ba_clone'
 drivers/scsi/cxlflash/vlun.c:308: warning: Excess function parameter 'to_free' description in 'ba_clone'
 drivers/scsi/cxlflash/vlun.c:369: warning: Function parameter or member 'lli' not described in 'init_vlun'
 drivers/scsi/cxlflash/vlun.c:369: warning: Excess function parameter 'lun_info' description in 'init_vlun'

Link: https://lore.kernel.org/r/20210317091230.2912389-37-lee.jones@linaro.org
Cc: "Manoj N. Kumar" <manoj@linux.ibm.com>
Cc: "Matthew R. Ochs" <mrochs@linux.ibm.com>
Cc: Uma Krishnan <ukrishn@linux.ibm.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>