Corentin Labbe [Mon, 2 May 2022 20:19:14 +0000 (20:19 +0000)]
crypto: sun8i-ss - rework handling of IV
[ Upstream commit
359e893e8af456be2fefabe851716237df289cbf ]
sun8i-ss fail handling IVs when doing decryption of multiple SGs in-place.
It should backup the last block of each SG source for using it later as
IVs.
In the same time remove allocation on requests path for storing all
IVs.
Fixes:
f08fcced6d00 ("crypto: allwinner - Add sun8i-ss cryptographic offloader")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qi Zheng [Fri, 13 May 2022 03:38:37 +0000 (20:38 -0700)]
tty: fix deadlock caused by calling printk() under tty_port->lock
[ Upstream commit
6b9dbedbe3499fef862c4dff5217cf91f34e43b3 ]
pty_write() invokes kmalloc() which may invoke a normal printk() to print
failure message. This can cause a deadlock in the scenario reported by
syz-bot below:
CPU0 CPU1 CPU2
---- ---- ----
lock(console_owner);
lock(&port_lock_key);
lock(&port->lock);
lock(&port_lock_key);
lock(&port->lock);
lock(console_owner);
As commit
dbdda842fe96 ("printk: Add console owner and waiter logic to
load balance console writes") said, such deadlock can be prevented by
using printk_deferred() in kmalloc() (which is invoked in the section
guarded by the port->lock). But there are too many printk() on the
kmalloc() path, and kmalloc() can be called from anywhere, so changing
printk() to printk_deferred() is too complicated and inelegant.
Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so
that printk() will not be called, and this deadlock problem can be
avoided.
Syzbot reported the following lockdep error:
======================================================
WARNING: possible circular locking dependency detected
5.4.143-00237-g08ccc19a-dirty #10 Not tainted
------------------------------------------------------
syz-executor.4/29420 is trying to acquire lock:
ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752 [inline]
ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470 kernel/printk/printk.c:2023
but task is already holding lock:
ffff8880119c9158 (&port->lock){-.-.}-{2:2}, at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&port->lock){-.-.}-{2:2}:
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159
tty_port_tty_get drivers/tty/tty_port.c:288 [inline] <-- lock(&port->lock);
tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47
serial8250_tx_chars+0x530/0xa80 drivers/tty/serial/8250/8250_port.c:1767
serial8250_handle_irq.part.0+0x31f/0x3d0 drivers/tty/serial/8250/8250_port.c:1854
serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827 [inline] <-- lock(&port_lock_key);
serial8250_default_handle_irq+0xb2/0x220 drivers/tty/serial/8250/8250_port.c:1870
serial8250_interrupt+0xfd/0x200 drivers/tty/serial/8250/8250_core.c:126
__handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156
[...]
-> #1 (&port_lock_key){-.-.}-{2:2}:
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159
serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198
<-- lock(&port_lock_key);
call_console_drivers kernel/printk/printk.c:1819 [inline]
console_unlock+0x8cb/0xd00 kernel/printk/printk.c:2504
vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024 <-- lock(console_owner);
vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394
printk+0xba/0xed kernel/printk/printk.c:2084
register_console+0x8b3/0xc10 kernel/printk/printk.c:2829
univ8250_console_init+0x3a/0x46 drivers/tty/serial/8250/8250_core.c:681
console_init+0x49d/0x6d3 kernel/printk/printk.c:2915
start_kernel+0x5e9/0x879 init/main.c:713
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241
-> #0 (console_owner){....}-{0:0}:
[...]
lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734
console_trylock_spinning kernel/printk/printk.c:1773 [inline] <-- lock(console_owner);
vprintk_emit+0x307/0x470 kernel/printk/printk.c:2023
vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394
printk+0xba/0xed kernel/printk/printk.c:2084
fail_dump lib/fault-inject.c:45 [inline]
should_fail+0x67b/0x7c0 lib/fault-inject.c:144
__should_failslab+0x152/0x1c0 mm/failslab.c:33
should_failslab+0x5/0x10 mm/slab_common.c:1224
slab_pre_alloc_hook mm/slab.h:468 [inline]
slab_alloc_node mm/slub.c:2723 [inline]
slab_alloc mm/slub.c:2807 [inline]
__kmalloc+0x72/0x300 mm/slub.c:3871
kmalloc include/linux/slab.h:582 [inline]
tty_buffer_alloc+0x23f/0x2a0 drivers/tty/tty_buffer.c:175
__tty_buffer_request_room+0x156/0x2a0 drivers/tty/tty_buffer.c:273
tty_insert_flip_string_fixed_flag+0x93/0x250 drivers/tty/tty_buffer.c:318
tty_insert_flip_string include/linux/tty_flip.h:37 [inline]
pty_write+0x126/0x1f0 drivers/tty/pty.c:122 <-- lock(&port->lock);
n_tty_write+0xa7a/0xfc0 drivers/tty/n_tty.c:2356
do_tty_write drivers/tty/tty_io.c:961 [inline]
tty_write+0x512/0x930 drivers/tty/tty_io.c:1045
__vfs_write+0x76/0x100 fs/read_write.c:494
[...]
other info that might help us debug this:
Chain exists of:
console_owner --> &port_lock_key --> &port->lock
Link: https://lkml.kernel.org/r/20220511061951.1114-2-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20220510113809.80626-2-zhengqi.arch@bytedance.com
Fixes:
b6da31b2c07c ("tty: Fix data race in tty_insert_flip_string_fixed_flag")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Francesco Dolcini [Mon, 4 Apr 2022 08:15:09 +0000 (10:15 +0200)]
PCI: imx6: Fix PERST# start-up sequence
[ Upstream commit
a6809941c1f17f455db2cf4ca19c6d8c8746ec25 ]
According to the PCIe standard the PERST# signal (reset-gpio in
fsl,imx* compatible dts) should be kept asserted for at least 100 usec
before the PCIe refclock is stable, should be kept asserted for at
least 100 msec after the power rails are stable and the host should wait
at least 100 msec after it is de-asserted before accessing the
configuration space of any attached device.
From PCIe CEM r2.0, sec 2.6.2
T-PVPERL: Power stable to PERST# inactive - 100 msec
T-PERST-CLK: REFCLK stable before PERST# inactive - 100 usec.
From PCIe r5.0, sec 6.6.1
With a Downstream Port that does not support Link speeds greater than
5.0 GT/s, software must wait a minimum of 100 ms before sending a
Configuration Request to the device immediately below that Port.
Failure to do so could prevent PCIe devices to be working correctly,
and this was experienced with real devices.
Move reset assert to imx6_pcie_assert_core_reset(), this way we ensure
that PERST# is asserted before enabling any clock, move de-assert to the
end of imx6_pcie_deassert_core_reset() after the clock is enabled and
deemed stable and add a new delay of 100 msec just afterward.
Link: https://lore.kernel.org/all/20220211152550.286821-1-francesco.dolcini@toradex.com
Link: https://lore.kernel.org/r/20220404081509.94356-1-francesco.dolcini@toradex.com
Fixes:
bb38919ec56e ("PCI: imx6: Add support for i.MX6 PCIe controller")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Waiman Long [Tue, 10 May 2022 01:29:21 +0000 (18:29 -0700)]
ipc/mqueue: use get_tree_nodev() in mqueue_get_tree()
[ Upstream commit
d60c4d01a98bc1942dba6e3adc02031f5519f94b ]
When running the stress-ng clone benchmark with multiple testing threads,
it was found that there were significant spinlock contention in sget_fc().
The contended spinlock was the sb_lock. It is under heavy contention
because the following code in the critcal section of sget_fc():
hlist_for_each_entry(old, &fc->fs_type->fs_supers, s_instances) {
if (test(old, fc))
goto share_extant_sb;
}
After testing with added instrumentation code, it was found that the
benchmark could generate thousands of ipc namespaces with the
corresponding number of entries in the mqueue's fs_supers list where the
namespaces are the key for the search. This leads to excessive time in
scanning the list for a match.
Looking back at the mqueue calling sequence leading to sget_fc():
mq_init_ns()
=> mq_create_mount()
=> fc_mount()
=> vfs_get_tree()
=> mqueue_get_tree()
=> get_tree_keyed()
=> vfs_get_super()
=> sget_fc()
Currently, mq_init_ns() is the only mqueue function that will indirectly
call mqueue_get_tree() with a newly allocated ipc namespace as the key for
searching. As a result, there will never be a match with the exising ipc
namespaces stored in the mqueue's fs_supers list.
So using get_tree_keyed() to do an existing ipc namespace search is just a
waste of time. Instead, we could use get_tree_nodev() to eliminate the
useless search. By doing so, we can greatly reduce the sb_lock hold time
and avoid the spinlock contention problem in case a large number of ipc
namespaces are present.
Of course, if the code is modified in the future to allow
mqueue_get_tree() to be called with an existing ipc namespace instead of a
new one, we will have to use get_tree_keyed() in this case.
The following stress-ng clone benchmark command was run on a 2-socket
48-core Intel system:
./stress-ng --clone 32 --verbose --oomable --metrics-brief -t 20
The "bogo ops/s" increased from 5948.45 before patch to 9137.06 after
patch. This is an increase of 54% in performance.
Link: https://lkml.kernel.org/r/20220121172315.19652-1-longman@redhat.com
Fixes:
935c6912b198 ("ipc: Convert mqueue fs to fs_context")
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexey Dobriyan [Tue, 10 May 2022 01:29:19 +0000 (18:29 -0700)]
proc: fix dentry/inode overinstantiating under /proc/${pid}/net
[ Upstream commit
7055197705709c59b8ab77e6a5c7d46d61edd96e ]
When a process exits, /proc/${pid}, and /proc/${pid}/net dentries are
flushed. However some leaf dentries like /proc/${pid}/net/arp_cache
aren't. That's because respective PDEs have proc_misc_d_revalidate() hook
which returns 1 and leaves dentries/inodes in the LRU.
Force revalidation/lookup on everything under /proc/${pid}/net by
inheriting proc_net_dentry_ops.
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/YjdVHgildbWO7diJ@localhost.localdomain
Fixes:
c6c75deda813 ("proc: fix lookup in /proc/net subdirectories after setns(2)")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: hui li <juanfengpy@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Charles Keepax [Wed, 4 May 2022 17:08:30 +0000 (18:08 +0100)]
ASoC: atmel-classd: Remove endianness flag on class d component
[ Upstream commit
0104d52a6a69b06b0e8167f7c1247e8c76aca070 ]
The endianness flag should have been removed when the driver was
ported across from having both a CODEC and CPU side component, to
just having a CPU component and using the dummy for the CODEC. The
endianness flag is used to indicate that the device is completely
ambivalent to the endianness of the data, typically due to the
endianness being lost over the hardware link (ie. the link defines
bit ordering). It's usage didn't have any effect when the driver
had both a CPU and CODEC component, since the union of those equals
the CPU side settings, but now causes the driver to falsely report
it supports big endian. Correct this by removing the flag.
Fixes:
1dfdbe73ccf9 ("ASoC: atmel-classd: remove codec component")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Charles Keepax [Wed, 4 May 2022 17:08:29 +0000 (18:08 +0100)]
ASoC: atmel-pdmic: Remove endianness flag on pdmic component
[ Upstream commit
52857c3baa0e5ddeba7b2c84e56bb71c9674e048 ]
The endianness flag should have been removed when the driver was
ported across from having both a CODEC and CPU side component, to
just having a CPU component and using the dummy for the CODEC. The
endianness flag is used to indicate that the device is completely
ambivalent to the endianness of the data, typically due to the
endianness being lost over the hardware link (ie. the link defines
bit ordering). It's usage didn't have any effect when the driver
had both a CPU and CODEC component, since the union of those equals
the CPU side settings, but now causes the driver to falsely report
it supports big endian. Correct this by removing the flag.
Fixes:
f3c668074a04 ("ASoC: atmel-pdmic: remove codec component")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robert Marko [Tue, 28 Sep 2021 17:09:19 +0000 (19:09 +0200)]
arm64: dts: marvell: espressobin-ultra: enable front USB3 port
[ Upstream commit
eacec7ebc16cf5d2f6a6c7cf5d57156da2c3e98f ]
Espressobin Ultra has a front panel USB3.0 Type-A port which works
just fine so enable it.
I dont see a reason why it was disabled in the first place anyway.
Fixes:
3404fe15a60f ("arm64: dts: marvell: add DT for ESPRESSObin-Ultra")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robert Marko [Tue, 28 Sep 2021 17:09:17 +0000 (19:09 +0200)]
arm64: dts: marvell: espressobin-ultra: fix SPI-NOR config
[ Upstream commit
5202f4c3816b42e989f9cad49a73c7e88fba89f4 ]
SPI config for the SPI-NOR is incorrect and completely breaking
reading/writing to the onboard SPI-NOR.
SPI-NOR is connected in the single(x1) IO mode and not in the quad
(x4) mode.
Also, there is no need to override the max frequency from the DTSI
as the mx25u3235f that is used supports 104Mhz.
Fixes:
3404fe15a60f ("arm64: dts: marvell: add DT for ESPRESSObin-Ultra")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yangyang Li [Fri, 29 Apr 2022 09:31:04 +0000 (17:31 +0800)]
RDMA/hns: Add the detection for CMDQ status in the device initialization process
[ Upstream commit
e8ea058edc2b225a68b307057a65599625daaebf ]
CMDQ may fail during HNS ROCEE initialization. The following is the log
when the execution fails:
hns3 0000:bd:00.2: In reset process RoCE client reinit.
hns3 0000:bd:00.2: CMDQ move tail from 840 to 839
hns3 0000:bd:00.2 hns_2: failed to set gid, ret = -11!
hns3 0000:bd:00.2: CMDQ move tail from 840 to 839
<...>
hns3 0000:bd:00.2: CMDQ move tail from 840 to 839
hns3 0000:bd:00.2: CMDQ move tail from 840 to 0
hns3 0000:bd:00.2: [cmd]token 14e mailbox 20 timeout.
hns3 0000:bd:00.2 hns_2: set HEM step 0 failed!
hns3 0000:bd:00.2 hns_2: set HEM address to HW failed!
hns3 0000:bd:00.2 hns_2: failed to alloc mtpt, ret = -16.
infiniband hns_2: Couldn't create ib_mad PD
infiniband hns_2: Couldn't open port 1
hns3 0000:bd:00.2: Reset done, RoCE client reinit finished.
However, even if ib_mad client registration failed, ib_register_device()
still returns success to the driver.
In the device initialization process, CMDQ execution fails because HW/FW
is abnormal. Therefore, if CMDQ fails, the initialization function should
set CMDQ to a fatal error state and return a failure to the caller.
Fixes:
9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/20220429093104.26687-1-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Mon, 2 May 2022 19:29:41 +0000 (12:29 -0700)]
powerpc/4xx/cpm: Fix return value of __setup() handler
[ Upstream commit
5bb99fd4090fe1acfdb90a97993fcda7f8f5a3d6 ]
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings.
Also, error return codes don't mean anything to obsolete_checksetup() --
only non-zero (usually 1) or zero. So return 1 from cpm_powersave_off().
Fixes:
d164f6d4f910 ("powerpc/4xx: Add suspend and idle support")
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220502192941.20955-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Mon, 2 May 2022 19:29:25 +0000 (12:29 -0700)]
powerpc/idle: Fix return value of __setup() handler
[ Upstream commit
b793a01000122d2bd133ba451a76cc135b5e162c ]
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings.
Also, error return codes don't mean anything to obsolete_checksetup() --
only non-zero (usually 1) or zero. So return 1 from powersave_off().
Fixes:
302eca184fb8 ("[POWERPC] cell: use ppc_md->power_save instead of cbe_idle_loop")
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220502192925.19954-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Fri, 29 Apr 2022 08:26:36 +0000 (16:26 +0800)]
pinctrl: renesas: core: Fix possible null-ptr-deref in sh_pfc_map_resources()
[ Upstream commit
5376e3d904532e657fd7ca1a9b1ff3d351527b90 ]
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
Fixes:
c7977ec4a336 ("pinctrl: sh-pfc: Convert to platform_get_*()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220429082637.1308182-1-yangyingliang@huawei.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Fri, 22 Apr 2022 07:29:30 +0000 (09:29 +0200)]
pinctrl: renesas: r8a779a0: Fix GPIO function on I2C-capable pins
[ Upstream commit
4288caed9a6319b766dc0adf605c7b401180db34 ]
Unlike on R-Car Gen3 SoCs, setting a bit to zero in a GPIO / Peripheral
Function Select Register (GPSRn) on R-Car V3U is not always sufficient
to configure a pin for GPIO. For I2C-capable pins, the I2C function
must also be explicitly disabled in the corresponding Module Select
Register (MODSELn).
Add the missing FN_SEL_I2Ci_0 function enums to the pinmux_data[] array
by temporarily overriding the GP_2_j_FN function enum to expand to two
enums: the original GP_2_j_FN enum to configure the GSPR register bits,
and the missing FN_SEL_I2Ci_0 enum to configure the MODSEL register
bits.
Fixes:
741a7370fc3b8b54 ("pinctrl: renesas: Initial R8A779A0 (V3U) PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4611e29e7b105513883084c1d6dc39c3ac8b525c.1650610471.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Fri, 22 Jan 2021 01:08:19 +0000 (17:08 -0800)]
powerpc/8xx: export 'cpm_setbrg' for modules
[ Upstream commit
22f8e625ebabd7ed3185b82b44b4f12fc0402113 ]
Fix missing export for a loadable module build:
ERROR: modpost: "cpm_setbrg" [drivers/tty/serial/cpm_uart/cpm_uart.ko] undefined!
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
[chleroy: Changed Fixes: tag]
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210122010819.30986-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lv Ruyi [Mon, 25 Apr 2022 09:09:47 +0000 (09:09 +0000)]
drm/msm/dpu: fix error check return value of irq_of_parse_and_map()
[ Upstream commit
95093595914c17f32e1d6228b4db06fab8cebd35 ]
The irq_of_parse_and_map() function returns 0 on failure, and does not
return a negative value anyhow, so never enter this conditional branch.
Fixes:
25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/483291/
Link: https://lore.kernel.org/r/20220425090947.3498897-1-lv.ruyi@zte.com.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Fri, 29 Apr 2022 21:38:01 +0000 (14:38 -0700)]
list: fix a data-race around ep->rdllist
[ Upstream commit
d679ae94fdd5d3ab00c35078f5af5f37e068b03d ]
ep_poll() first calls ep_events_available() with no lock held and checks
if ep->rdllist is empty by list_empty_careful(), which reads
rdllist->prev. Thus all accesses to it need some protection to avoid
store/load-tearing.
Note INIT_LIST_HEAD_RCU() already has the annotation for both prev
and next.
Commit
bf3b9f6372c4 ("epoll: Add busy poll support to epoll with socket
fds.") added the first lockless ep_events_available(), and commit
c5a282e9635e ("fs/epoll: reduce the scope of wq lock in epoll_wait()")
made some ep_events_available() calls lockless and added single call under
a lock, finally commit
e59d3c64cba6 ("epoll: eliminate unnecessary lock
for zero timeout") made the last ep_events_available() lockless.
BUG: KCSAN: data-race in do_epoll_wait / do_epoll_wait
write to 0xffff88810480c7d8 of 8 bytes by task 1802 on cpu 0:
INIT_LIST_HEAD include/linux/list.h:38 [inline]
list_splice_init include/linux/list.h:492 [inline]
ep_start_scan fs/eventpoll.c:622 [inline]
ep_send_events fs/eventpoll.c:1656 [inline]
ep_poll fs/eventpoll.c:1806 [inline]
do_epoll_wait+0x4eb/0xf40 fs/eventpoll.c:2234
do_epoll_pwait fs/eventpoll.c:2268 [inline]
__do_sys_epoll_pwait fs/eventpoll.c:2281 [inline]
__se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275
__x64_sys_epoll_pwait+0x74/0x80 fs/eventpoll.c:2275
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff88810480c7d8 of 8 bytes by task 1799 on cpu 1:
list_empty_careful include/linux/list.h:329 [inline]
ep_events_available fs/eventpoll.c:381 [inline]
ep_poll fs/eventpoll.c:1797 [inline]
do_epoll_wait+0x279/0xf40 fs/eventpoll.c:2234
do_epoll_pwait fs/eventpoll.c:2268 [inline]
__do_sys_epoll_pwait fs/eventpoll.c:2281 [inline]
__se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275
__x64_sys_epoll_pwait+0x74/0x80 fs/eventpoll.c:2275
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0xffff88810480c7d0 -> 0xffff888103c15098
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 1799 Comm: syz-fuzzer Tainted: G W 5.17.0-rc7-syzkaller-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Link: https://lkml.kernel.org/r/20220322002653.33865-3-kuniyu@amazon.co.jp
Fixes:
e59d3c64cba6 ("epoll: eliminate unnecessary lock for zero timeout")
Fixes:
c5a282e9635e ("fs/epoll: reduce the scope of wq lock in epoll_wait()")
Fixes:
bf3b9f6372c4 ("epoll: Add busy poll support to epoll with socket fds.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reported-by: syzbot+bdd6e38a1ed5ee58d8bd@syzkaller.appspotmail.com
Cc: Al Viro <viro@zeniv.linux.org.uk>, Andrew Morton <akpm@linux-foundation.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Cc: Kuniyuki Iwashima <kuni1840@gmail.com>
Cc: "Soheil Hassas Yeganeh" <soheil@google.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Sridhar Samudrala" <sridhar.samudrala@intel.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Thu, 20 Jan 2022 02:08:56 +0000 (18:08 -0800)]
list: introduce list_is_head() helper and re-use it in list.h
[ Upstream commit
0425473037db40d9e322631f2d4dc6ef51f97e88 ]
Introduce list_is_head() in the similar (*) way as it's done for
list_entry_is_head(). Make use of it in the list.h.
*) it's done as inliner and not a macro to be aligned with other
list_is_*() APIs; while at it, make all three to have the same
style.
Link: https://lkml.kernel.org/r/20211201141824.81400-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sudeep Holla [Fri, 29 Apr 2022 11:39:44 +0000 (12:39 +0100)]
firmware: arm_ffa: Remove incorrect assignment of driver_data
[ Upstream commit
00512d2930b338fdd42bd90bbd1793fe212c2d31 ]
The ffa core driver currently assigns its own driver information
to individual ffa device driver_data which is wrong. Firstly, it leaks
this core driver information to individual ffa_device and hence to
ffa_driver. Secondly the ffa_device driver_data is for use by individual
ffa_driver and not for this core driver managing all those devices.
Link: https://lore.kernel.org/r/20220429113946.2087145-2-sudeep.holla@arm.com
Fixes:
d0c0bce83122 ("firmware: arm_ffa: Setup in-kernel users of FFA partitions")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sudeep Holla [Fri, 29 Apr 2022 11:39:43 +0000 (12:39 +0100)]
firmware: arm_ffa: Fix uuid parameter to ffa_partition_probe
[ Upstream commit
f3c45c045e25ed52461829d2ce07954f72b6ad15 ]
While we pass uuid_null intentionally to ffa_partition_probe in
ffa_setup_partitions to get the count of the partitions, it must not be
uuid_null in ffa_partition_info_get which is used by the ffa_drivers
to fetch the specific partition info passing the UUID of the partition.
Fix ffa_partition_info_get by passing the received uuid down to
ffa_partition_probe so that the correct partition information is fetched.
Link: https://lore.kernel.org/r/20220429113946.2087145-1-sudeep.holla@arm.com
Fixes:
d0c0bce83122 ("firmware: arm_ffa: Setup in-kernel users of FFA partitions")
Reported-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Fri, 29 Apr 2022 06:16:19 +0000 (23:16 -0700)]
drivers/base/memory: fix an unlikely reference counting issue in __add_memory_block()
[ Upstream commit
f47f758cff59c68015d6b9b9c077110df7c2c828 ]
__add_memory_block() calls both put_device() and device_unregister() when
storing the memory block into the xarray. This is incorrect because
xarray doesn't take an additional reference and device_unregister()
already calls put_device().
Triggering the issue looks really unlikely and its only effect should be
to log a spurious warning about a ref counted issue.
Link: https://lkml.kernel.org/r/d44c63d78affe844f020dc02ad6af29abc448fc4.1650611702.git.christophe.jaillet@wanadoo.fr
Fixes:
4fb6eabf1037 ("drivers/base/memory.c: cache memory blocks in xarray to accelerate lookup")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Scott Cheloha <cheloha@linux.vnet.ibm.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Muchun Song [Fri, 29 Apr 2022 06:16:09 +0000 (23:16 -0700)]
dax: fix cache flush on PMD-mapped pages
[ Upstream commit
e583b5c472bd23d450e06f148dc1f37be74f7666 ]
The flush_cache_page() only remove a PAGE_SIZE sized range from the cache.
However, it does not cover the full pages in a THP except a head page.
Replace it with flush_cache_range() to fix this issue. This is just a
documentation issue with the respect to properly documenting the expected
usage of cache flushing before modifying the pmd. However, in practice
this is not a problem due to the fact that DAX is not available on
architectures with virtually indexed caches per:
commit
d92576f1167c ("dax: does not work correctly with virtual aliasing caches")
Link: https://lkml.kernel.org/r/20220403053957.10770-3-songmuchun@bytedance.com
Fixes:
f729c8c9b24f ("dax: wrprotect pmd_t in dax_mapping_entry_mkclean")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaohe Lin [Fri, 29 Apr 2022 06:16:06 +0000 (23:16 -0700)]
drivers/base/node.c: fix compaction sysfs file leak
[ Upstream commit
da63dc84befaa9e6079a0bc363ff0eaa975f9073 ]
Compaction sysfs file is created via compaction_register_node in
register_node. But we forgot to remove it in unregister_node. Thus
compaction sysfs file is leaked. Using compaction_unregister_node to fix
this issue.
Link: https://lkml.kernel.org/r/20220401070905.43679-1-linmiaohe@huawei.com
Fixes:
ed4a6d7f0676 ("mm: compaction: add /sys trigger for per-node memory compaction")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Fri, 22 Apr 2022 10:53:38 +0000 (12:53 +0200)]
pinctrl: mvebu: Fix irq_of_parse_and_map() return value
[ Upstream commit
71bc7cf3be65bab441e03667cf215c557712976c ]
The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.
Fixes:
2f227605394b ("pinctrl: armada-37xx: Add irqchip support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220422105339.78810-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Williams [Thu, 28 Apr 2022 22:47:46 +0000 (15:47 -0700)]
nvdimm: Allow overwrite in the presence of disabled dimms
[ Upstream commit
bb7bf697fed58eae9d3445944e457ab0de4da54f ]
It is not clear why the original implementation of overwrite support
required the dimm driver to be active before overwrite could proceed. In
fact that can lead to cases where the kernel retains an invalid cached
copy of the labels from before the overwrite. Unfortunately the kernel
has not only allowed that case, but enforced it.
Going forward, allow for overwrite to happen while the label area is
offline, and follow-on with updates to 'ndctl sanitize-dimm --overwrite'
to trigger the label area invalidation by default.
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Reported-by: Krzysztof Kensicki <krzysztof.kensicki@intel.com>
Fixes:
7d988097c546 ("acpi/nfit, libnvdimm/security: Add security DSM overwrite support")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Williams [Tue, 26 Apr 2022 20:23:05 +0000 (13:23 -0700)]
nvdimm: Fix firmware activation deadlock scenarios
[ Upstream commit
e6829d1bd3c4b58296ee9e412f7ed4d6cb390192 ]
Lockdep reports the following deadlock scenarios for CXL root device
power-management, device_prepare(), operations, and device_shutdown()
operations for 'nd_region' devices:
Chain exists of:
&nvdimm_region_key --> &nvdimm_bus->reconfig_mutex --> system_transition_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(system_transition_mutex);
lock(&nvdimm_bus->reconfig_mutex);
lock(system_transition_mutex);
lock(&nvdimm_region_key);
Chain exists of:
&cxl_nvdimm_bridge_key --> acpi_scan_lock --> &cxl_root_key
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&cxl_root_key);
lock(acpi_scan_lock);
lock(&cxl_root_key);
lock(&cxl_nvdimm_bridge_key);
These stem from holding nvdimm_bus_lock() over hibernate_quiet_exec()
which walks the entire system device topology taking device_lock() along
the way. The nvdimm_bus_lock() is protecting against unregistration,
multiple simultaneous ops callers, and preventing activate_show() from
racing activate_store(). For the first 2, the lock is redundant.
Unregistration already flushes all ops users, and sysfs already prevents
multiple threads to be active in an ops handler at the same time. For
the last userspace should already be waiting for its last
activate_store() to complete, and does not need activate_show() to flush
the write side, so this lock usage can be deleted in these attributes.
Fixes:
48001ea50d17 ("PM, libnvdimm: Add runtime firmware activation support")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/165074883800.4116052.10737040861825806582.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cristian Marussi [Wed, 30 Mar 2022 15:05:32 +0000 (16:05 +0100)]
firmware: arm_scmi: Fix list protocols enumeration in the base protocol
[ Upstream commit
8009120e0354a67068e920eb10dce532391361d0 ]
While enumerating protocols implemented by the SCMI platform using
BASE_DISCOVER_LIST_PROTOCOLS, the number of returned protocols is
currently validated in an improper way since the check employs a sum
between unsigned integers that could overflow and cause the check itself
to be silently bypassed if the returned value 'loop_num_ret' is big
enough.
Fix the validation avoiding the addition.
Link: https://lore.kernel.org/r/20220330150551.2573938-4-cristian.marussi@arm.com
Fixes:
b6f20ff8bd94 ("firmware: arm_scmi: add common infrastructure and support for base protocol")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lad Prabhakar [Tue, 26 Apr 2022 07:49:22 +0000 (08:49 +0100)]
ASoC: sh: rz-ssi: Release the DMA channels in rz_ssi_probe() error path
[ Upstream commit
767e6f26204d3f5406630e86b720d01818b8616d ]
DMA channels requested by rz_ssi_dma_request() in rz_ssi_probe() were
never released in the error path apart from one place. This patch fixes
this issue by calling rz_ssi_release_dma_channels() in the error path.
Fixes:
26ac471c5354 ("ASoC: sh: rz-ssi: Add SSI DMAC support")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220426074922.13319-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lad Prabhakar [Tue, 26 Apr 2022 07:49:21 +0000 (08:49 +0100)]
ASoC: sh: rz-ssi: Propagate error codes returned from platform_get_irq_byname()
[ Upstream commit
91686a3984f34df0ab844cdbaa7e4d9621129f5d ]
Propagate error codes returned from platform_get_irq_byname() instead of
returning -ENODEV. platform_get_irq_byname() may return -EPROBE_DEFER, to
handle such cases propagate the error codes.
While at it drop the dev_err_probe() messages as platform_get_irq_byname()
already does this for us in case of error.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220426074922.13319-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiner Kallweit [Fri, 17 Dec 2021 09:22:31 +0000 (10:22 +0100)]
ASoC: sh: rz-ssi: Check return value of pm_runtime_resume_and_get()
[ Upstream commit
f04b4fb47d83b110a5b007fb2eddea862cfeb151 ]
The return value of pm_runtime_resume_and_get() needs to be checked to
avoid a usage count imbalance in the error case. This fix is basically
the same as
92c959bae2e5 ("reset: renesas: Fix Runtime PM usage"),
and the last step before pm_runtime_resume_and_get() can be annotated
as __must_check.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/9fed506d-b780-55cd-45a4-9bd2407c910f@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matthias Schiffer [Tue, 19 Apr 2022 07:51:57 +0000 (09:51 +0200)]
arm64: dts: ti: k3-am64-mcu: remove incorrect UART base clock rates
[ Upstream commit
439677d416b17dd39964d5f7d64b742a2e51da5b ]
We found that (at least some versions of) the sci-fw set the base clock
rate for UARTs in the MCU domain to 96 MHz instead of the expected 48 MHz,
leading to incorrect baud rates when used from Linux.
As the 8250_omap driver will query the actual clock rate from the clk
driver when clock-frequency is unset, removing the incorrect property is
sufficient to fix the baud rate.
Fixes:
8abae9389bdb ("arm64: dts: ti: Add support for AM642 SoC")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20220419075157.189347-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
QintaoShen [Thu, 24 Mar 2022 08:35:40 +0000 (16:35 +0800)]
soc: bcm: Check for NULL return of devm_kzalloc()
[ Upstream commit
b4bd2aafacce48db26b0a213d849818d940556dd ]
As the potential failure of allocation, devm_kzalloc() may return NULL. Then
the 'pd->pmb' and the follow lines of code may bring null pointer dereference.
Therefore, it is better to check the return value of devm_kzalloc() to avoid
this confusion.
Fixes:
8bcac4011ebe ("soc: bcm: add PM driver for Broadcom's PMB")
Signed-off-by: QintaoShen <unSimple1993@163.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gustavo A. R. Silva [Thu, 3 Mar 2022 23:55:21 +0000 (17:55 -0600)]
scsi: fcoe: Fix Wstringop-overflow warnings in fcoe_wwn_from_mac()
[ Upstream commit
54db804d5d7d36709d1ce70bde3b9a6c61b290b6 ]
Fix the following Wstringop-overflow warnings when building with GCC-11:
drivers/scsi/fcoe/fcoe.c: In function ‘fcoe_netdev_config’:
drivers/scsi/fcoe/fcoe.c:744:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=]
744 | wwnn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, 1, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/fcoe/fcoe.c:744:32: note: referencing argument 1 of type ‘unsigned char *’
In file included from drivers/scsi/fcoe/fcoe.c:36:
./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
| ^~~~~~~~~~~~~~~~~
drivers/scsi/fcoe/fcoe.c:747:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=]
747 | wwpn = fcoe_wwn_from_mac(ctlr->ctl_src_addr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
748 | 2, 0);
| ~~~~~
drivers/scsi/fcoe/fcoe.c:747:32: note: referencing argument 1 of type ‘unsigned char *’
In file included from drivers/scsi/fcoe/fcoe.c:36:
./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
| ^~~~~~~~~~~~~~~~~
CC drivers/scsi/bnx2fc/bnx2fc_io.o
In function ‘bnx2fc_net_config’,
inlined from ‘bnx2fc_if_create’ at drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1543:7:
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:833:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=]
833 | wwnn = fcoe_wwn_from_mac(ctlr->ctl_src_addr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
834 | 1, 0);
| ~~~~~
drivers/scsi/bnx2fc/bnx2fc_fcoe.c: In function ‘bnx2fc_if_create’:
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:833:32: note: referencing argument 1 of type ‘unsigned char *’
In file included from drivers/scsi/bnx2fc/bnx2fc.h:53,
from drivers/scsi/bnx2fc/bnx2fc_fcoe.c:17:
./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
| ^~~~~~~~~~~~~~~~~
In function ‘bnx2fc_net_config’,
inlined from ‘bnx2fc_if_create’ at drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1543:7:
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:839:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=]
839 | wwpn = fcoe_wwn_from_mac(ctlr->ctl_src_addr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
840 | 2, 0);
| ~~~~~
drivers/scsi/bnx2fc/bnx2fc_fcoe.c: In function ‘bnx2fc_if_create’:
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:839:32: note: referencing argument 1 of type ‘unsigned char *’
In file included from drivers/scsi/bnx2fc/bnx2fc.h:53,
from drivers/scsi/bnx2fc/bnx2fc_fcoe.c:17:
./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
| ^~~~~~~~~~~~~~~~~
drivers/scsi/qedf/qedf_main.c: In function ‘__qedf_probe’:
drivers/scsi/qedf/qedf_main.c:3520:30: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=]
3520 | qedf->wwnn = fcoe_wwn_from_mac(qedf->mac, 1, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/qedf/qedf_main.c:3520:30: note: referencing argument 1 of type ‘unsigned char *’
In file included from drivers/scsi/qedf/qedf.h:9,
from drivers/scsi/qedf/qedf_main.c:23:
./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
| ^~~~~~~~~~~~~~~~~
drivers/scsi/qedf/qedf_main.c:3521:30: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=]
3521 | qedf->wwpn = fcoe_wwn_from_mac(qedf->mac, 2, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/qedf/qedf_main.c:3521:30: note: referencing argument 1 of type ‘unsigned char *’
In file included from drivers/scsi/qedf/qedf.h:9,
from drivers/scsi/qedf/qedf_main.c:23:
./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
| ^~~~~~~~~~~~~~~~~
by changing the array size to the correct value of ETH_ALEN in the
argument declaration.
Also, fix a couple of checkpatch warnings:
WARNING: function definition argument 'unsigned int' should also have an identifier name
This helps with the ongoing efforts to globally enable
-Wstringop-overflow.
Link: https://github.com/KSPP/linux/issues/181
Fixes:
85b4aa4926a5 ("[SCSI] fcoe: Fibre Channel over Ethernet")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lv Ruyi [Tue, 12 Apr 2022 08:53:05 +0000 (08:53 +0000)]
mfd: ipaq-micro: Fix error check return value of platform_get_irq()
[ Upstream commit
3b49ae380ce1a3054e0c505dd9a356b82a5b48e8 ]
platform_get_irq() return negative value on failure, so null check of
irq is incorrect. Fix it by comparing whether it is less than zero.
Fixes:
dcc21cc09e3c ("mfd: Add driver for Atmel Microcontroller on iPaq h3xxx")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220412085305.2533030-1-lv.ruyi@zte.com.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hari Bathini [Wed, 6 Apr 2022 09:38:37 +0000 (15:08 +0530)]
powerpc/fadump: fix PT_LOAD segment for boot memory area
[ Upstream commit
15eb77f873255cf9f4d703b63cfbd23c46579654 ]
Boot memory area is setup as separate PT_LOAD segment in the vmcore
as it is moved by f/w, on crash, to a destination address provided by
the kernel. Having separate PT_LOAD segment helps in handling the
different physical address and offset for boot memory area in the
vmcore.
Commit
ced1bf52f477 ("powerpc/fadump: merge adjacent memory ranges to
reduce PT_LOAD segements") inadvertly broke this pre-condition for
cases where some of the first kernel memory is available adjacent to
boot memory area. This scenario is rare but possible when memory for
fadump could not be reserved adjacent to boot memory area owing to
memory hole or such. Reading memory from a vmcore exported in such
scenario provides incorrect data. Fix it by ensuring no other region
is folded into boot memory area.
Fixes:
ced1bf52f477 ("powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements")
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406093839.206608-2-hbathini@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrea Parri (Microsoft) [Tue, 19 Apr 2022 12:23:20 +0000 (14:23 +0200)]
Drivers: hv: vmbus: Fix handling of messages with transaction ID of zero
[ Upstream commit
82cd4bacff88a11e36f143e2cb950174b09c86c3 ]
vmbus_request_addr() returns 0 (zero) if the transaction ID passed
to as argument is 0. This is unfortunate for two reasons: first,
netvsc_send_completion() does not check for a NULL cmd_rqst (before
dereferencing the corresponding NVSP message); second, 0 is a *valid*
value of cmd_rqst in netvsc_send_tx_complete(), cf. the call of
vmbus_sendpacket() in netvsc_send_pkt().
vmbus_request_addr() has included the code in question since its
introduction with commit
e8b7db38449ac ("Drivers: hv: vmbus: Add
vmbus_requestor data structure for VMBus hardening"); such code was
motivated by the early use of vmbus_requestor by hv_storvsc. Since
hv_storvsc moved to a tag-based mechanism to generate and retrieve
transaction IDs with commit
bf5fd8cae3c8f ("scsi: storvsc: Use
blk_mq_unique_tag() to generate requestIDs"), vmbus_request_addr()
can be modified to return VMBUS_RQST_ERROR if the ID is 0. This
change solves the issues in hv_netvsc (and makes the handling of
messages with transaction ID of 0 consistent with the semantics
"the ID is not contained in the requestor/invalid ID").
vmbus_next_request_id(), vmbus_request_addr() should still reserve
the ID of 0 for Hyper-V, because Hyper-V will "ignore" (not respond
to) VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED packets/requests with
transaction ID of 0 from the guest.
Fixes:
bf5fd8cae3c8f ("scsi: storvsc: Use blk_mq_unique_tag() to generate requestIDs")
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220419122325.10078-2-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vinod Koul [Thu, 21 Apr 2022 07:35:02 +0000 (13:05 +0530)]
arm64: dts: qcom: qrb5165-rb5: Fix can-clock node name
[ Upstream commit
1eae95fb1d696968ca72be3ac8e0d62bb4d8da42 ]
Per DT spec node names should not have underscores (_) in them, so
change can_clock to can-clock.
Fixes:
5c44c564e449 ("arm64: dts: qcom: qrb5165-rb5: Add support for MCP2518FD")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220421073502.1824089-1-vkoul@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabien Parent [Sun, 27 Mar 2022 16:08:13 +0000 (18:08 +0200)]
pinctrl: mediatek: mt8195: enable driver on mtk platforms
[ Upstream commit
931d7fa89e640dea146e00b77c1d73459e66ab6e ]
Set the pinctrl driver as built-in by default if
ARM64 and ARCH_MEDIATEK are enabled.
Fixes:
6cf5e9ef362a ("pinctrl: add pinctrl driver on mt8195")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220327160813.2978637-1-fparent@baylibre.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Caleb Connolly [Mon, 28 Mar 2022 00:50:02 +0000 (01:50 +0100)]
pinctrl/rockchip: support deferring other gpio params
[ Upstream commit
8ce5ef64546850294b021497046588a7abcebe96 ]
Add support for deferring other params like PIN_CONFIG_INPUT_ENABLE.
This will be used to add support for PIN_CONFIG_INPUT_ENABLE to the
driver.
Fixes:
e7165b1dff06 ("pinctrl/rockchip: add a queue for deferred pin output settings on probe")
Fixes:
59dd178e1d7c ("gpio/rockchip: fetch deferred output settings on probe")
Signed-off-by: Caleb Connolly <kc@postmarketos.org>
Link: https://lore.kernel.org/r/20220328005005.72492-2-kc@postmarketos.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuanhong Guo [Sat, 9 Apr 2022 09:13:47 +0000 (17:13 +0800)]
arm: mediatek: select arch timer for mt7629
[ Upstream commit
d66aea197d534e23d4989eb72fca9c0c114b97c9 ]
This chip has an armv7 arch timer according to the dts. Select it in
Kconfig to enforce the support for it.
Otherwise the system time is just completely wrong if user forget to
enable ARM_ARCH_TIMER in kernel config.
Fixes:
a43379dddf1b ("arm: mediatek: add MT7629 smp bring up code")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Link: https://lore.kernel.org/r/20220409091347.2473449-1-gch981213@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Wahren [Sat, 9 Apr 2022 09:51:29 +0000 (11:51 +0200)]
pinctrl: bcm2835: implement hook for missing gpio-ranges
[ Upstream commit
d2b67744fd99b06555b7e4d67302ede6c7c6a638 ]
The commit
c8013355ead6 ("ARM: dts: gpio-ranges property is now required")
fixed the GPIO probing issues caused by "pinctrl: bcm2835: Change init
order for gpio hogs". This changed only the kernel DTS files. Unfortunately
it isn't guaranteed that these files are shipped to all users.
So implement the necessary backward compatibility for BCM2835 and
BCM2711 platform.
Fixes:
266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220409095129.45786-3-stefan.wahren@i2se.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Wahren [Sat, 9 Apr 2022 09:51:28 +0000 (11:51 +0200)]
gpiolib: of: Introduce hook for missing gpio-ranges
[ Upstream commit
3550bba25d5587a701e6edf20e20984d2ee72c78 ]
Since commit
2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges")
the device tree nodes of GPIO controller need the gpio-ranges property to
handle gpio-hogs. Unfortunately it's impossible to guarantee that every new
kernel is shipped with an updated device tree binary.
In order to provide backward compatibility with those older DTB, we need a
callback within of_gpiochip_add_pin_range() so the relevant platform driver
can handle this case.
Fixes:
2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220409095129.45786-2-stefan.wahren@i2se.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Wed, 13 Apr 2022 19:11:54 +0000 (19:11 +0000)]
crypto: marvell/cesa - ECB does not IV
[ Upstream commit
4ffa1763622ae5752961499588f3f8874315f974 ]
The DES3 ECB has an IV size set but ECB does not need one.
Fixes:
4ada483978237 ("crypto: marvell/cesa - add Triple-DES support")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangyu Hua [Mon, 18 Apr 2022 08:57:58 +0000 (16:57 +0800)]
misc: ocxl: fix possible double free in ocxl_file_register_afu
[ Upstream commit
950cf957fe34d40d63dfa3bf3968210430b6491e ]
info_release() will be called in device_unregister() when info->dev's
reference count is 0. So there is no need to call ocxl_afu_put() and
kfree() again.
Fix this by adding free_minor() and return to err_unregister error path.
Fixes:
75ca758adbaf ("ocxl: Create a clear delineation between ocxl backend & frontend")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220418085758.38145-1-hbh25y@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Wahren [Mon, 11 Apr 2022 20:01:41 +0000 (22:01 +0200)]
ARM: dts: bcm2835-rpi-b: Fix GPIO line names
[ Upstream commit
97bd8659c1c46c23e4daea7e040befca30939950 ]
Recently this has been fixed in the vendor tree, so upstream this.
Fixes:
731b26a6ac17 ("ARM: bcm2835: Add names for the Raspberry Pi GPIO lines")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Phil Elwell [Mon, 11 Apr 2022 20:01:40 +0000 (22:01 +0200)]
ARM: dts: bcm2837-rpi-3-b-plus: Fix GPIO line name of power LED
[ Upstream commit
57f718aa4b93392fb1a8c0a874ab882b9e18136a ]
The red LED on the Raspberry Pi 3 B Plus is the power LED.
So fix the GPIO line name accordingly.
Fixes:
71c0cd2283f2 ("ARM: dts: bcm2837: Add Raspberry Pi 3 B+")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Phil Elwell [Mon, 11 Apr 2022 20:01:39 +0000 (22:01 +0200)]
ARM: dts: bcm2837-rpi-cm3-io3: Fix GPIO line names for SMPS I2C
[ Upstream commit
9fd26fd02749ec964eb0d588a3bab9e09bf77927 ]
The GPIOs 46 & 47 are already used for a I2C interface to a SMPS.
So fix the GPIO line names accordingly.
Fixes:
a54fe8a6cf66 ("ARM: dts: add Raspberry Pi Compute Module 3 and IO board")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Phil Elwell [Mon, 11 Apr 2022 20:01:38 +0000 (22:01 +0200)]
ARM: dts: bcm2835-rpi-zero-w: Fix GPIO line name for Wifi/BT
[ Upstream commit
2c663e5e5bbf2a5b85e0f76ccb69663f583c3e33 ]
The GPIOs 30 to 39 are connected to the Cypress CYW43438 (Wifi/BT).
So fix the GPIO line names accordingly.
Fixes:
2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Fri, 25 Mar 2022 17:58:51 +0000 (18:58 +0100)]
ARM: dts: stm32: Fix PHY post-reset delay on Avenger96
[ Upstream commit
ef2d90708883f4025a801feb0ba8411a7a4387e1 ]
Per KSZ9031RNX PHY datasheet FIGURE 7-5: POWER-UP/POWER-DOWN/RESET TIMING
Note 2: After the de-assertion of reset, wait a minimum of 100 μs before
starting programming on the MIIM (MDC/MDIO) interface.
Add 1ms post-reset delay to guarantee this figure.
Fixes:
010ca9fe500bf ("ARM: dts: stm32: Add missing ethernet PHY reset on AV96")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marc Kleine-Budde [Thu, 17 Mar 2022 20:29:07 +0000 (21:29 +0100)]
can: xilinx_can: mark bit timing constants as const
[ Upstream commit
ae38fda02996d43d9fb09f16e81e0008704dd524 ]
This patch marks the bit timing constants as const.
Fixes:
c223da689324 ("can: xilinx_can: Add support for CANFD FD frames")
Link: https://lore.kernel.org/all/20220317203119.792552-1-mkl@pengutronix.de
Cc: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
Cc: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guenter Roeck [Fri, 18 Mar 2022 16:54:22 +0000 (09:54 -0700)]
platform/chrome: Re-introduce cros_ec_cmd_xfer and use it for ioctls
[ Upstream commit
57b888ca2541785de2fcb90575b378921919b6c0 ]
Commit
413dda8f2c6f ("platform/chrome: cros_ec_chardev: Use
cros_ec_cmd_xfer_status helper") inadvertendly changed the userspace ABI.
Previously, cros_ec ioctls would only report errors if the EC communication
failed, and otherwise return success and the result of the EC
communication. An EC command execution failure was reported in the EC
response field. The above mentioned commit changed this behavior, and the
ioctl itself would fail. This breaks userspace commands trying to analyze
the EC command execution error since the actual EC command response is no
longer reported to userspace.
Fix the problem by re-introducing the cros_ec_cmd_xfer() helper, and use it
to handle ioctl messages.
Fixes:
413dda8f2c6f ("platform/chrome: cros_ec_chardev: Use cros_ec_cmd_xfer_status helper")
Cc: Daisuke Nojiri <dnojiri@chromium.org>
Cc: Rob Barnes <robbarnes@google.com>
Cc: Rajat Jain <rajatja@google.com>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Parth Malkan <parthmalkan@google.com>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Max Krummenacher [Mon, 11 Apr 2022 15:22:24 +0000 (17:22 +0200)]
ARM: dts: imx6dl-colibri: Fix I2C pinmuxing
[ Upstream commit
5f5c579a34a87117c20b411df583ae816c1ec84f ]
Fix names of extra pingroup node and property for gpio bus recovery.
Without the change i2c2 is not functional.
Fixes:
56f0df6b6b58 ("ARM: dts: imx*(colibri|apalis): add missing recovery modes to i2c")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tzung-Bi Shih [Wed, 16 Feb 2022 08:03:02 +0000 (16:03 +0800)]
platform/chrome: cros_ec: fix error handling in cros_ec_register()
[ Upstream commit
2cd01bd6b117df07b1bc2852f08694fdd29e40ed ]
Fix cros_ec_register() to unregister platform devices if
blocking_notifier_chain_register() fails.
Also use the single exit path to handle the platform device
unregistration.
Fixes:
42cd0ab476e2 ("platform/chrome: cros_ec: Query EC protocol version if EC transitions between RO/RW")
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Giovanni Cabiddu [Thu, 7 Apr 2022 16:54:41 +0000 (17:54 +0100)]
crypto: qat - set COMPRESSION capability for DH895XCC
[ Upstream commit
0eaa51543273fd0f4ba9bea83638f7033436e5eb ]
The capability detection logic clears bits for the features that are
disabled in a certain SKU. For example, if the bit associate to
compression is not present in the LEGFUSE register, the correspondent
bit is cleared in the capability mask.
This change adds the compression capability to the mask as this was
missing in the commit that enhanced the capability detection logic.
Fixes:
cfe4894eccdc ("crypto: qat - set COMPRESSION capability for QAT GEN2")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Giovanni Cabiddu [Thu, 7 Apr 2022 16:54:40 +0000 (17:54 +0100)]
crypto: qat - set CIPHER capability for DH895XCC
[ Upstream commit
6a23804cb8bcb85c6998bf193d94d4036db26f51 ]
Set the CIPHER capability for QAT DH895XCC devices if the hardware supports
it. This is done if both the CIPHER and the AUTHENTICATION engines are
available on the device.
Fixes:
ad1332aa67ec ("crypto: qat - add support for capability detection")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Giovanni Cabiddu [Thu, 16 Dec 2021 09:13:13 +0000 (09:13 +0000)]
crypto: qat - set COMPRESSION capability for QAT GEN2
[ Upstream commit
cfe4894eccdc7fa5cd35bf34e918614d06ecce38 ]
Enhance the device capability detection for QAT GEN2 devices to detect if
a device supports the compression service.
This is done by checking both the fuse and the strap registers for c62x
and c3xxx and only the fuse register for dh895xcc.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Giovanni Cabiddu [Thu, 16 Dec 2021 09:13:12 +0000 (09:13 +0000)]
crypto: qat - set CIPHER capability for QAT GEN2
[ Upstream commit
547bde7bd4ecd78f36f98744e6c9a0999e52da5a ]
Set the CIPHER capability for QAT GEN2 devices if the hardware supports
it. This is done if both the CIPHER and the AUTHENTICATION engines are
available on the device.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Christopherson [Thu, 7 Apr 2022 00:23:15 +0000 (00:23 +0000)]
KVM: nVMX: Clear IDT vectoring on nested VM-Exit for double/triple fault
[ Upstream commit
9bd1f0efa859b61950d109b32ff8d529cc33a3ad ]
Clear the IDT vectoring field in vmcs12 on next VM-Exit due to a double
or triple fault. Per the SDM, a VM-Exit isn't considered to occur during
event delivery if the exit is due to an intercepted double fault or a
triple fault. Opportunistically move the default clearing (no event
"pending") into the helper so that it's more obvious that KVM does indeed
handle this case.
Note, the double fault case is worded rather wierdly in the SDM:
The original event results in a double-fault exception that causes the
VM exit directly.
Temporarily ignoring injected events, double faults can _only_ occur if
an exception occurs while attempting to deliver a different exception,
i.e. there's _always_ an original event. And for injected double fault,
while there's no original event, injected events are never subject to
interception.
Presumably the SDM is calling out that a the vectoring info will be valid
if a different exit occurs after a double fault, e.g. if a #PF occurs and
is intercepted while vectoring #DF, then the vectoring info will show the
double fault. In other words, the clause can simply be read as:
The VM exit is caused by a double-fault exception.
Fixes:
4704d0befb07 ("KVM: nVMX: Exiting from L2 to L1")
Cc: Chenyi Qiang <chenyi.qiang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220407002315.78092-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Christopherson [Thu, 7 Apr 2022 00:23:14 +0000 (00:23 +0000)]
KVM: nVMX: Leave most VM-Exit info fields unmodified on failed VM-Entry
[ Upstream commit
c3634d25fbee88e2368a8e0903ae0d0670eb9e71 ]
Don't modify vmcs12 exit fields except EXIT_REASON and EXIT_QUALIFICATION
when performing a nested VM-Exit due to failed VM-Entry. Per the SDM,
only the two aformentioned fields are filled and "All other VM-exit
information fields are unmodified".
Fixes:
4704d0befb07 ("KVM: nVMX: Exiting from L2 to L1")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220407002315.78092-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bjorn Andersson [Fri, 8 Apr 2022 21:33:36 +0000 (14:33 -0700)]
soc: qcom: llcc: Add MODULE_DEVICE_TABLE()
[ Upstream commit
5334a3b12a7233b31788de60d61bfd890059d783 ]
The llcc-qcom driver can be compiled as a module, but lacks
MODULE_DEVICE_TABLE() and will therefore not be loaded automatically.
Fix this.
Fixes:
a3134fb09e0b ("drivers: soc: Add LLCC driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220408213336.581661-3-bjorn.andersson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thorsten Scherer [Wed, 6 Apr 2022 04:39:45 +0000 (06:39 +0200)]
ARM: dts: ci4x10: Adapt to changes in imx6qdl.dtsi regarding fec clocks
[ Upstream commit
3d397a1277853498e8b7b305f2610881357c033f ]
Commit
f3e7dae323ab ("ARM: dts: imx6qdl: add enet_out clk
support") added another item to the list of clocks for the fec
device. As imx6dl-eckelmann-ci4x10.dts only overwrites clocks,
but not clock-names this resulted in an inconsistency with
clocks having one item more than clock-names.
Also overwrite clock-names with the same value as in
imx6qdl.dtsi. This is a no-op today, but prevents similar
inconsistencies if the soc file will be changed in a similar way
in the future.
Signed-off-by: Thorsten Scherer <t.scherer@eckelmann.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes:
f3e7dae323ab ("ARM: dts: imx6qdl: add enet_out clk support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiantao Zhang [Wed, 9 Mar 2022 12:01:04 +0000 (20:01 +0800)]
PCI: dwc: Fix setting error return on MSI DMA mapping failure
[ Upstream commit
88557685cd72cf0db686a4ebff3fad4365cb6071 ]
When dma_mapping_error() returns error because of no enough memory,
but dw_pcie_host_init() returns success, which will mislead the callers.
Link: https://lore.kernel.org/r/30170911-0e2f-98ce-9266-70465b9073e5@huawei.com
Fixes:
07940c369a6b ("PCI: dwc: Fix MSI page leakage in suspend/resume")
Signed-off-by: Jianrong Zhang <zhangjianrong5@huawei.com>
Signed-off-by: Jiantao Zhang <water.zhangjiantao@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Wed, 9 Mar 2022 09:19:52 +0000 (09:19 +0000)]
PCI: mediatek: Fix refcount leak in mtk_pcie_subsys_powerup()
[ Upstream commit
214e0d8fe4a813ae6ffd62bc2dfe7544c20914f4 ]
The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.
Link: https://lore.kernel.org/r/20220309091953.5630-1-linmq006@gmail.com
Fixes:
87e8657ba99c ("PCI: mediatek: Add new method to get shared pcie-cfg base address")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Tue, 15 Mar 2022 06:59:44 +0000 (09:59 +0300)]
PCI: rockchip: Fix find_first_zero_bit() limit
[ Upstream commit
096950e230b8d83645c7cf408b9f399f58c08b96 ]
The ep->ob_region_map bitmap is a long and it has BITS_PER_LONG bits.
Link: https://lore.kernel.org/r/20220315065944.GB13572@kili
Fixes:
cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Tue, 15 Mar 2022 06:58:29 +0000 (09:58 +0300)]
PCI: cadence: Fix find_first_zero_bit() limit
[ Upstream commit
0aa3a0937feeb91a0e4e438c3c063b749b194192 ]
The ep->ob_region_map bitmap is a long and it has BITS_PER_LONG bits.
Link: https://lore.kernel.org/r/20220315065829.GA13572@kili
Fixes:
37dddf14f1ae ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Tue, 8 Mar 2022 07:36:48 +0000 (07:36 +0000)]
soc: qcom: smsm: Fix missing of_node_put() in smsm_parse_ipc
[ Upstream commit
aad66a3c78da668f4506356c2fdb70b7a19ecc76 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes:
c97c4090ff72 ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308073648.24634-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Tue, 8 Mar 2022 07:19:42 +0000 (07:19 +0000)]
soc: qcom: smp2p: Fix missing of_node_put() in smp2p_parse_ipc
[ Upstream commit
8fd3f18ea31a398ecce4a6d3804433658678b0a3 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes:
50e99641413e ("soc: qcom: smp2p: Qualcomm Shared Memory Point to Point")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308071942.22942-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andre Przywara [Thu, 17 Mar 2022 16:23:40 +0000 (16:23 +0000)]
ARM: dts: suniv: F1C100: fix watchdog compatible
[ Upstream commit
01a850ee61cbf0ab77dcbf26bb133fec2dd640d6 ]
The F1C100 series of SoCs actually have their watchdog IP being
compatible with the newer Allwinner generation, not the older one.
The currently described sun4i-a10-wdt actually does not work, neither
the watchdog functionality (just never fires), nor the reset part
(reboot hangs).
Replace the compatible string with the one used by the newer generation.
Verified to work with both the watchdog and reboot functionality on a
LicheePi Nano.
Also add the missing interrupt line and clock source, to make it binding
compliant.
Fixes:
4ba16d17efdd ("ARM: dts: suniv: add initial DTSI file for F1C100s")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220317162349.739636-4-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafał Miłecki [Wed, 30 Mar 2022 12:05:27 +0000 (14:05 +0200)]
ARM: dts: BCM5301X: Update pin controller node name
[ Upstream commit
130b5e32ba9d2d2313e39cf3f6d0729bff02b76a ]
This fixes:
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: cru-bus@100: 'pin-controller@1c0' does not match any of the regexes: '^clock-controller@[a-f0-9]+$', '^phy@[a-f0-9]+$', '^pinctrl@[a-f0-9]+$', '^syscon@[a-f0-9]+$', '^thermal@[a-f0-9]+$'
From schema: Documentation/devicetree/bindings/mfd/brcm,cru.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pin-controller@1c0: $nodename:0: 'pin-controller@1c0' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
From schema: Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
Ref:
e7391b021e3f ("dt-bindings: mfd: brcm,cru: Rename pinctrl node")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafał Miłecki [Fri, 29 Oct 2021 16:05:23 +0000 (18:05 +0200)]
ARM: dts: BCM5301X: update CRU block description
[ Upstream commit
31fd9b79dc580301c53a001482755ba7e88c2809 ]
This describes CRU in a way matching documentation and fixes:
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: cru@100: $nodename:0: 'cru@100' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
From schema: /lib/python3.6/site-packages/dtschema/schemas/simple-bus.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sun, 20 Mar 2022 07:10:30 +0000 (08:10 +0100)]
memory: samsung: exynos5422-dmc: Avoid some over memory allocation
[ Upstream commit
56653827f0d7bc7c2d8bac0e119fd1521fa9990a ]
'dmc->counter' is a 'struct devfreq_event_dev **', so there is some
over memory allocation. 'counters_size' should be computed with
'sizeof(struct devfreq_event_dev *)'.
Use 'sizeof(*dmc->counter)' instead to fix it.
While at it, use devm_kcalloc() instead of devm_kzalloc()+open coded
multiplication.
Fixes:
6e7674c3c6df ("memory: Add DMC driver for Exynos5422")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/69d7e69346986e2fdb994d4382954c932f9f0993.1647760213.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mario Limonciello [Fri, 1 Apr 2022 03:40:03 +0000 (22:40 -0500)]
PCI/ACPI: Allow D3 only if Root Port can signal and wake from D3
[ Upstream commit
dff6139015dc68e93be3822a7bd406a1d138628b ]
acpi_pci_bridge_d3(dev) returns "true" if "dev" is a hotplug bridge that
can handle hotplug events while in D3. Previously this meant either:
- "dev" has a _PS0 or _PR0 method (acpi_pci_power_manageable()), or
- The Root Port above "dev" has a _DSD with a "HotPlugSupportInD3"
property with value 1.
This did not consider _PRW, which tells us about wakeup GPEs (ACPI v6.4,
sec 7.3.13). Without a wakeup GPE, from an ACPI perspective the Root Port
has no way of generating wakeup signals, so hotplug events will be lost if
we use D3.
Similarly, it did not consider _S0W, which tells us the deepest D-state
from which a device can wake itself (sec 7.3.20). If _S0W tells us the
device cannot wake from D3, hotplug events will again be lost if we use D3.
Some platforms, e.g., AMD Yellow Carp, supply "HotPlugSupportInD3" without
_PRW or with an _S0W that says the Root Port cannot wake from D3. On those
platforms, we previously put bridges in D3hot, hotplug events were lost,
and hotplugged devices would not be recognized without manually rescanning.
Allow bridges to be put in D3 only if the Root Port can generate wakeup
GPEs (wakeup.flags.valid), it can wake from D3 (_S0W), AND it has the
"HotPlugSupportInD3" property.
Neither Windows 10 nor Windows 11 puts the bridge in D3 when the firmware
is configured this way, and this change aligns the handling of the
situation to be the same.
[bhelgaas: commit log, tidy "HotPlugSupportInD3" check and comment]
Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/07_Power_and_Performance_Mgmt/device-power-management-objects.html?highlight=s0w#s0w-s0-device-wake-state
Link: https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-pcie-root-ports-supporting-hot-plug-in-d3
Link: https://lore.kernel.org/r/20220401034003.3166-1-mario.limonciello@amd.com
Fixes:
26ad34d510a87 ("PCI / ACPI: Whitelist D3 for more PCIe hotplug ports")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Allen-KH Cheng [Fri, 18 Mar 2022 14:45:22 +0000 (22:45 +0800)]
arm64: dts: mt8192: Fix nor_flash status disable typo
[ Upstream commit
27f0eb16b0d417c155e96b5d3b89074699944e09 ]
Correct nor_flash status disable typo of mt8192 SoC.
Fixes:
d0a197a0d064a ("arm64: dts: mt8192: add nor_flash device node")
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220318144534.17996-11-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shawn Lin [Tue, 15 Mar 2022 09:27:06 +0000 (17:27 +0800)]
arm64: dts: rockchip: Move drive-impedance-ohm to emmc phy on rk3399
[ Upstream commit
4246d0bab2a8685e3d4aec2cb0ef8c526689ce96 ]
drive-impedance-ohm is introduced for emmc phy instead of pcie phy.
Fixes:
fb8b7460c995 ("arm64: dts: rockchip: Define drive-impedance-ohm for RK3399's emmc-phy.")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/r/1647336426-154797-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robin Murphy [Fri, 20 May 2022 17:10:13 +0000 (18:10 +0100)]
dma-direct: don't over-decrypt memory
[ Upstream commit
4a37f3dd9a83186cb88d44808ab35b78375082c9 ]
The original x86 sev_alloc() only called set_memory_decrypted() on
memory returned by alloc_pages_node(), so the page order calculation
fell out of that logic. However, the common dma-direct code has several
potential allocators, not all of which are guaranteed to round up the
underlying allocation to a power-of-two size, so carrying over that
calculation for the encryption/decryption size was a mistake. Fix it by
rounding to a *number* of pages, rather than an order.
Until recently there was an even worse interaction with DMA_DIRECT_REMAP
where we could have ended up decrypting part of the next adjacent
vmalloc area, only averted by no architecture actually supporting both
configs at once. Don't ask how I found that one out...
Fixes:
c10f07aa27da ("dma/direct: Handle force decryption for DMA coherent buffers in common code")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Tue, 9 Nov 2021 14:41:01 +0000 (15:41 +0100)]
dma-direct: always leak memory that can't be re-encrypted
[ Upstream commit
a90cf30437489343b8386ae87b4827b6d6c3ed50 ]
We must never let unencrypted memory go back into the general page pool.
So if we fail to set it back to encrypted when freeing DMA memory, leak
the memory instead and warn the user.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Thu, 21 Oct 2021 07:20:39 +0000 (09:20 +0200)]
dma-direct: don't call dma_set_decrypted for remapped allocations
[ Upstream commit
5570449b6876f215d49ac4db9ccce6ff7aa1e20a ]
Remapped allocations handle the encrypted bit through the pgprot passed
to vmap, so there is no call dma_set_decrypted. Note that this case is
currently entirely theoretical as no valid kernel configuration supports
remapped allocations and memory encryption currently.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Mon, 18 Oct 2021 11:18:34 +0000 (13:18 +0200)]
dma-direct: factor out dma_set_{de,en}crypted helpers
[ Upstream commit
4d0564785bb03841e4b5c5b31aa4ecd1eb0d01bb ]
Factor out helpers the make dealing with memory encryption a little less
cumbersome.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
liuyacan [Mon, 23 May 2022 04:57:07 +0000 (12:57 +0800)]
net/smc: postpone sk_refcnt increment in connect()
[ Upstream commit
75c1edf23b95a9c66923d9269d8e86e4dbde151f ]
Same trigger condition as commit
86434744. When setsockopt runs
in parallel to a connect(), and switch the socket into fallback
mode. Then the sk_refcnt is incremented in smc_connect(), but
its state stay in SMC_INIT (NOT SMC_ACTIVE). This cause the
corresponding sk_refcnt decrement in __smc_release() will not be
performed.
Fixes:
86434744fedf ("net/smc: add fallback check to connect()")
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Fri, 20 May 2022 05:15:23 +0000 (22:15 -0700)]
net: dsa: restrict SMSC_LAN9303_I2C kconfig
[ Upstream commit
0a3ad7d323686fbaae8688326cc5ea0d185c6fca ]
Since kconfig 'select' does not follow dependency chains, if symbol KSA
selects KSB, then KSA should also depend on the same symbols that KSB
depends on, in order to prevent Kconfig warnings and possible build
errors.
Change NET_DSA_SMSC_LAN9303_I2C and NET_DSA_SMSC_LAN9303_MDIO so that
they are limited to VLAN_8021Q if the latter is enabled. This prevents
the Kconfig warning:
WARNING: unmet direct dependencies detected for NET_DSA_SMSC_LAN9303
Depends on [m]: NETDEVICES [=y] && NET_DSA [=y] && (VLAN_8021Q [=m] || VLAN_8021Q [=m]=n)
Selected by [y]:
- NET_DSA_SMSC_LAN9303_I2C [=y] && NETDEVICES [=y] && NET_DSA [=y] && I2C [=y]
Fixes:
430065e26719 ("net: dsa: lan9303: add VLAN IDs to master device")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Juergen Borleis <jbe@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Mans Rullgard <mans@mansr.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 21 May 2022 06:33:01 +0000 (08:33 +0200)]
hinic: Avoid some over memory allocation
[ Upstream commit
15d221d0c345b76947911a3ac91897ffe2f1cc4e ]
'prod_idx' (atomic_t) is larger than 'shadow_idx' (u16), so some memory is
over-allocated.
Fixes:
b15a9f37be2b ("net-next/hinic: Add wq")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gustavo A. R. Silva [Wed, 8 Dec 2021 04:03:11 +0000 (22:03 -0600)]
net: huawei: hinic: Use devm_kcalloc() instead of devm_kzalloc()
[ Upstream commit
9d922f5df53844228b9f7c62f2593f4f06c0b69b ]
Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211208040311.GA169838@embeddedor
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Sat, 21 May 2022 08:03:31 +0000 (09:03 +0100)]
rxrpc: Fix decision on when to generate an IDLE ACK
[ Upstream commit
9a3dedcf18096e8f7f22b8777d78c4acfdea1651 ]
Fix the decision on when to generate an IDLE ACK by keeping a count of the
number of packets we've received, but not yet soft-ACK'd, and the number of
packets we've processed, but not yet hard-ACK'd, rather than trying to keep
track of which DATA sequence numbers correspond to those points.
We then generate an ACK when either counter exceeds 2. The counters are
both cleared when we transcribe the information into any sort of ACK packet
for transmission. IDLE and DELAY ACKs are skipped if both counters are 0
(ie. no change).
Fixes:
805b21b929e2 ("rxrpc: Send an ACK after every few DATA packets we receive")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Sat, 21 May 2022 08:03:24 +0000 (09:03 +0100)]
rxrpc: Don't let ack.previousPacket regress
[ Upstream commit
81524b6312535897707f2942695da1d359a5e56b ]
The previousPacket field in the rx ACK packet should never go backwards -
it's now the highest DATA sequence number received, not the last on
received (it used to be used for out of sequence detection).
Fixes:
248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Sat, 21 May 2022 08:03:18 +0000 (09:03 +0100)]
rxrpc: Fix overlapping ACK accounting
[ Upstream commit
8940ba3cfe4841928777fd45eaa92051522c7f0c ]
Fix accidental overlapping of Rx-phase ACK accounting with Tx-phase ACK
accounting through variables shared between the two. call->acks_* members
refer to ACKs received in the Tx phase and call->ackr_* members to ACKs
sent/to be sent during the Rx phase.
Fixes:
1a2391c30c0b ("rxrpc: Fix detection of out of order acks")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Sat, 21 May 2022 08:03:11 +0000 (09:03 +0100)]
rxrpc: Don't try to resend the request if we're receiving the reply
[ Upstream commit
114af61f88fbe34d641b13922d098ffec4c1be1b ]
rxrpc has a timer to trigger resending of unacked data packets in a call.
This is not cancelled when a client call switches to the receive phase on
the basis that most calls don't last long enough for it to ever expire.
However, if it *does* expire after we've started to receive the reply, we
shouldn't then go into trying to retransmit or pinging the server to find
out if an ack got lost.
Fix this by skipping the resend code if we're into receiving the reply to a
client call.
Fixes:
17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Sat, 21 May 2022 08:03:04 +0000 (09:03 +0100)]
rxrpc: Fix listen() setting the bar too high for the prealloc rings
[ Upstream commit
88e22159750b0d55793302eeed8ee603f5c1a95c ]
AF_RXRPC's listen() handler lets you set the backlog up to 32 (if you bump
up the sysctl), but whilst the preallocation circular buffers have 32 slots
in them, one of them has to be a dead slot because we're using CIRC_CNT().
This means that listen(rxrpc_sock, 32) will cause an oops when the socket
is closed because rxrpc_service_prealloc_one() allocated one too many calls
and rxrpc_discard_prealloc() won't then be able to get rid of them because
it'll think the ring is empty. rxrpc_release_calls_on_socket() then tries
to abort them, but oopses because call->peer isn't yet set.
Fix this by setting the maximum backlog to RXRPC_BACKLOG_MAX - 1 to match
the ring capacity.
BUG: kernel NULL pointer dereference, address:
0000000000000086
...
RIP: 0010:rxrpc_send_abort_packet+0x73/0x240 [rxrpc]
Call Trace:
<TASK>
? __wake_up_common_lock+0x7a/0x90
? rxrpc_notify_socket+0x8e/0x140 [rxrpc]
? rxrpc_abort_call+0x4c/0x60 [rxrpc]
rxrpc_release_calls_on_socket+0x107/0x1a0 [rxrpc]
rxrpc_release+0xc9/0x1c0 [rxrpc]
__sock_release+0x37/0xa0
sock_close+0x11/0x20
__fput+0x89/0x240
task_work_run+0x59/0x90
do_exit+0x319/0xaa0
Fixes:
00e907127e6f ("rxrpc: Preallocate peers, conns and calls for incoming service requests")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: https://lists.infradead.org/pipermail/linux-afs/2022-March/005079.html
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Adam Wujek [Thu, 19 May 2022 23:34:01 +0000 (23:34 +0000)]
hwmon: (pmbus) Check PEC support before reading other registers
[ Upstream commit
d1baf7a3a3177d46a7149858beddb88a9eca7a54 ]
Make sure that the support of PEC is determined before the read of other
registers. Otherwise the validation of PEC can trigger an error on the read
of STATUS_BYTE or STATUS_WORD registers.
The problematic scenario is the following. A device with enabled PEC
support is up and running and a kernel driver is loaded.
Then the driver is unloaded (or device unbound), the HW device
is reconfigured externally (e.g. by i2cset) to advertise itself as not
supporting PEC. Without the move of the code, at the second load of
the driver (or bind) the STATUS_BYTE or STATUS_WORD register is always
read with PEC enabled, which is likely to cause a read error resulting
with fail of a driver load (or bind).
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
Link: https://lore.kernel.org/r/20220519233334.438621-1-dev_public@wujek.eu
Fixes:
75d2b2b06bd84 ("hwmon: (pmbus) disable PEC if not enabled")
Fixes:
4e5418f787ec5 ("hwmon: (pmbus_core) Check adapter PEC support")
[groeck: Added Fixes: tags, dropped continuation line]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yongzhi Liu [Thu, 19 May 2022 12:09:48 +0000 (05:09 -0700)]
hv_netvsc: Fix potential dereference of NULL pointer
[ Upstream commit
eb4c0788964730d12e8dd520bd8f5217ca48321c ]
The return value of netvsc_devinfo_get()
needs to be checked to avoid use of NULL
pointer in case of an allocation failure.
Fixes:
0efeea5fb153 ("hv_netvsc: Add the support of hibernation")
Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1652962188-129281-1-git-send-email-lyz_cs@pku.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jakub Kicinski [Thu, 19 May 2022 00:43:05 +0000 (17:43 -0700)]
net: stmmac: fix out-of-bounds access in a selftest
[ Upstream commit
fe5c5fc145edcf98a759b895f52b646730eeb7be ]
GCC 12 points out that struct tc_action is smaller than
struct tcf_action:
drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c: In function ‘stmmac_test_rxp’:
drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c:1132:21: warning: array subscript ‘struct tcf_gact[0]’ is partly outside array bounds of ‘unsigned char[272]’ [-Warray-bounds]
1132 | gact->tcf_action = TC_ACT_SHOT;
| ^~
Fixes:
ccfc639a94f2 ("net: stmmac: selftests: Add a selftest for Flexible RX Parser")
Link: https://lore.kernel.org/r/20220519004305.2109708-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gustavo A. R. Silva [Wed, 6 Oct 2021 18:09:44 +0000 (13:09 -0500)]
net: stmmac: selftests: Use kcalloc() instead of kzalloc()
[ Upstream commit
36371876e000012ae4440fcf3097c2f0ed0f83e7 ]
Use 2-factor multiplication argument form kcalloc() instead
of kzalloc().
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20211006180944.GA913477@embeddedor
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexey Khoroshilov [Thu, 19 May 2022 22:31:26 +0000 (01:31 +0300)]
ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv()
[ Upstream commit
f7a344468105ef8c54086dfdc800e6f5a8417d3e ]
Validation of signed input should be done before casting to unsigned int.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Suggested-by: Mark Brown <broonie@kernel.org>
Fixes:
2fbe467bcbfc ("ASoC: max98090: Reject invalid values in custom control put()")
Link: https://lore.kernel.org/r/1652999486-29653-1-git-send-email-khoroshilov@ispras.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Duoming Zhou [Wed, 18 May 2022 11:57:33 +0000 (19:57 +0800)]
NFC: hci: fix sleep in atomic context bugs in nfc_hci_hcp_message_tx
[ Upstream commit
b413b0cb008646e9f24ce5253cb3cf7ee217aff6 ]
There are sleep in atomic context bugs when the request to secure
element of st21nfca is timeout. The root cause is that kzalloc and
alloc_skb with GFP_KERNEL parameter and mutex_lock are called in
st21nfca_se_wt_timeout which is a timer handler. The call tree shows
the execution paths that could lead to bugs:
(Interrupt context)
st21nfca_se_wt_timeout
nfc_hci_send_event
nfc_hci_hcp_message_tx
kzalloc(..., GFP_KERNEL) //may sleep
alloc_skb(..., GFP_KERNEL) //may sleep
mutex_lock() //may sleep
This patch moves the operations that may sleep into a work item.
The work item will run in another kernel thread which is in
process context to execute the bottom half of the interrupt.
So it could prevent atomic context from sleeping.
Fixes:
2130fb97fecf ("NFC: st21nfca: Adding support for secure element")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220518115733.62111-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Harini Katakam [Wed, 18 May 2022 17:07:56 +0000 (22:37 +0530)]
net: macb: Fix PTP one step sync support
[ Upstream commit
5cebb40bc9554aafcc492431181f43c6231b0459 ]
PTP one step sync packets cannot have CSUM padding and insertion in
SW since time stamp is inserted on the fly by HW.
In addition, ptp4l version 3.0 and above report an error when skb
timestamps are reported for packets that not processed for TX TS
after transmission.
Add a helper to identify PTP one step sync and fix the above two
errors. Add a common mask for PTP header flag field "twoStepflag".
Also reset ptp OSS bit when one step is not selected.
Fixes:
ab91f0a9b5f4 ("net: macb: Add hardware PTP support")
Fixes:
653e92a9175e ("net: macb: add support for padding and fcs computation")
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220518170756.7752-1-harini.katakam@xilinx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ulf Hansson [Wed, 11 May 2022 14:57:00 +0000 (16:57 +0200)]
PM: domains: Fix initialization of genpd's next_wakeup
[ Upstream commit
622d9b5577f19a6472db21df042fea8f5fefe244 ]
In the genpd governor we walk the list of child-domains to take into
account their next_wakeup. If the child-domain itself, doesn't have a
governor assigned to it, we can end up using the next_wakeup value before
it has been properly initialized. To prevent a possible incorrect behaviour
in the governor, let's initialize next_wakeup to KTIME_MAX.
Fixes:
c79aa080fb0f ("PM: domains: use device's next wakeup to determine domain idle state")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Sat, 14 May 2022 09:10:53 +0000 (17:10 +0800)]
ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition()
[ Upstream commit
be2af740e2a9c7134f2d8ab4f104006e110b13de ]
Fix the missing clk_disable_unprepare() before return
from wm2000_anc_transition() in the error handling case.
Fixes:
514cfd6dd725 ("ASoC: wm2000: Integrate with clock API")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220514091053.686416-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jan Kara [Thu, 19 May 2022 10:52:30 +0000 (12:52 +0200)]
bfq: Allow current waker to defend against a tentative one
[ Upstream commit
c5ac56bb6110e42e79d3106866658376b2e48ab9 ]
The code in bfq_check_waker() ignores wake up events from the current
waker. This makes it more likely we select a new tentative waker
although the current one is generating more wake up events. Treat
current waker the same way as any other process and allow it to reset
the waker detection logic.
Fixes:
71217df39dc6 ("block, bfq: make waker-queue detection more robust")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220519105235.31397-2-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jan Kara [Thu, 19 May 2022 10:52:29 +0000 (12:52 +0200)]
bfq: Relax waker detection for shared queues
[ Upstream commit
f950667356ce90a41b446b726d4595a10cb65415 ]
Currently we look for waker only if current queue has no requests. This
makes sense for bfq queues with a single process however for shared
queues when there is a larger number of processes the condition that
queue has no requests is difficult to meet because often at least one
process has some request in flight although all the others are waiting
for the waker to do the work and this harms throughput. Relax the "no
queued request for bfq queue" condition to "the current task has no
queued requests yet". For this, we also need to start tracking number of
requests in flight for each task.
This patch (together with the following one) restores the performance
for dbench with 128 clients that regressed with commit
c65e6fd460b4
("bfq: Do not let waker requests skip proper accounting") because
this commit makes requests of wakers properly enter BFQ queues and thus
these queues become ineligible for the old waker detection logic.
Dbench results:
Vanilla 5.18-rc3 5.18-rc3 + revert 5.18-rc3 patched
Mean 1237.36 ( 0.00%) 950.16 * 23.21%* 988.35 * 20.12%*
Numbers are time to complete workload so lower is better.
Fixes:
c65e6fd460b4 ("bfq: Do not let waker requests skip proper accounting")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220519105235.31397-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Tue, 17 May 2022 05:51:21 +0000 (09:51 +0400)]
thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe
[ Upstream commit
09700c504d8e63faffd2a2235074e8c5d130cb8f ]
of_find_node_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes:
e20db70dba1c ("thermal: imx_sc: add i.MX system controller thermal support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220517055121.18092-1-linmq006@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Wed, 11 May 2022 02:06:05 +0000 (10:06 +0800)]
thermal/core: Fix memory leak in __thermal_cooling_device_register()
[ Upstream commit
98a160e898c0f4a979af9de3ab48b4b1d42d1dbb ]
I got memory leak as follows when doing fault injection test:
unreferenced object 0xffff888010080000 (size 264312):
comm "182", pid 102533, jiffies
4296434960 (age 10.100s)
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff 40 7f 1f b9 ff ff ff ff ........@.......
backtrace:
[<
0000000038b2f4fc>] kmalloc_order_trace+0x1d/0x110 mm/slab_common.c:969
[<
00000000ebcb8da5>] __kmalloc+0x373/0x420 include/linux/slab.h:510
[<
0000000084137f13>] thermal_cooling_device_setup_sysfs+0x15d/0x2d0 include/linux/slab.h:586
[<
00000000352b8755>] __thermal_cooling_device_register+0x332/0xa60 drivers/thermal/thermal_core.c:927
[<
00000000fb9f331b>] devm_thermal_of_cooling_device_register+0x6b/0xf0 drivers/thermal/thermal_core.c:1041
[<
000000009b8012d2>] max6650_probe.cold+0x557/0x6aa drivers/hwmon/max6650.c:211
[<
00000000da0b7e04>] i2c_device_probe+0x472/0xac0 drivers/i2c/i2c-core-base.c:561
If device_register() fails, thermal_cooling_device_destroy_sysfs() need be called
to free the memory allocated in thermal_cooling_device_setup_sysfs().
Fixes:
8ea229511e06 ("thermal: Add cooling device's statistics in sysfs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220511020605.3096734-1-yangyingliang@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>