review.tizen.org Git - platform/kernel/linux-exynos.git/log

vmw_balloon: fix VMCI use when balloon built into kernel

commit c3cc1b0fc27508da53fe955a3b23d03964410682 upstream.

Currently, when all modules, including VMCI and VMware balloon are built
into the kernel, the initialization of the balloon happens before the
VMCI is probed. As a result, the balloon fails to initialize the VMCI
doorbell, which it uses to get asynchronous requests for balloon size
changes.

The problem can be seen in the logs, in the form of the following
message:
"vmw_balloon: failed to initialize vmci doorbell"

The driver would work correctly but slightly less efficiently, probing
for requests periodically. This patch changes the balloon to be
initialized using late_initcall() instead of module_init() to address
this issue. It does not address a situation in which VMCI is built as a
module and the balloon is built into the kernel.

Fixes: 48e3d668b790 ("VMware balloon: Enable notification via VMCI")
Cc: stable@vger.kernel.org
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vmw_balloon: VMCI_DOORBELL_SET does not check status

commit ce664331b2487a5d244a51cbdd8cb54f866fbe5d upstream.

When vmballoon_vmci_init() sets a doorbell using VMCI_DOORBELL_SET, for
some reason it does not consider the status and looks at the result.
However, the hypervisor does not update the result - it updates the
status. This might cause VMCI doorbell not to be enabled, resulting in
degraded performance.

Fixes: 48e3d668b790 ("VMware balloon: Enable notification via VMCI")
Cc: stable@vger.kernel.org
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vmw_balloon: do not use 2MB without batching

commit 5081efd112560d3febb328e627176235b250d59d upstream.

If the hypervisor sets 2MB batching is on, while batching is cleared,
the balloon code breaks. In this case the legacy mechanism is used with
2MB page. The VM would report a 2MB page is ballooned, and the
hypervisor would only take the first 4KB.

While the hypervisor should not report such settings, make the code more
robust by not enabling 2MB support without batching.

Fixes: 365bd7ef7ec8e ("VMware balloon: Support 2m page ballooning.")
Cc: stable@vger.kernel.org
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vmw_balloon: fix inflation of 64-bit GFNs

commit 09755690c6b7c1eabdc4651eb3b276f8feb1e447 upstream.

When balloon batching is not supported by the hypervisor, the guest
frame number (GFN) must fit in 32-bit. However, due to a bug, this check
was mistakenly ignored. In practice, when total RAM is greater than
16TB, the balloon does not work currently, making this bug unlikely to
happen.

Fixes: ef0f8f112984 ("VMware balloon: partially inline vmballoon_reserve_page.")
Cc: stable@vger.kernel.org
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

extcon: Release locking when sending the notification of connector state

commit 8a9dbb779fe882325b9a0238494a7afaff2eb444 upstream.

Previously, extcon used the spinlock before calling the notifier_call_chain
to prevent the scheduled out of task and to prevent the notification delay.
When spinlock is locked for sending the notification, deadlock issue
occured on the side of extcon consumer device. To fix this issue,
extcon consumer device should always use the work. it is always not
reasonable to use work.

To fix this issue on extcon consumer device, release locking when sending
the notification of connector state.

Fixes: ab11af049f88 ("extcon: Add the synchronization extcon APIs to support the notification")
Cc: stable@vger.kernel.org
Cc: Roger Quadros <rogerq@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ad9523: Fix return value for ad952x_store()

commit 9a5094ca29ea9b1da301b31fd377c0c0c4c23034 upstream.

A sysfs write callback function needs to either return the number of
consumed characters or an error.

The ad952x_store() function currently returns 0 if the input value was "0",
this will signal that no characters have been consumed and the function
will be called repeatedly in a loop indefinitely. Fix this by returning
number of supplied characters to indicate that the whole input string has
been consumed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Fixes: cd1678f96329 ("iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ad9523: Fix displayed phase

commit 5a4e33c1c53ae7d4425f7d94e60e4458a37b349e upstream.

Fix the displayed phase for the ad9523 driver. Currently the most
significant decimal place is dropped and all other digits are shifted one
to the left. This is due to a multiplication by 10, which is not necessary,
so remove it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Fixes: cd1678f9632 ("iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: sca3000: Fix missing return in switch

commit c5b974bee9d2ceae4c441ae5a01e498c2674e100 upstream.

The IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY case is missing a
return and will fall through to the default case and errorenously
return -EINVAL.

Fix this by adding in missing *return ret*.

Fixes: 626f971b5b07 ("staging:iio:accel:sca3000 Add write support to the low pass filter control")
Reported-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()

commit d3b26dd7cb0e3433bfd3c1d4dcf74c6039bb49fb upstream.

Before setting channel->rescind in vmbus_rescind_cleanup(), we should make
sure the channel callback won't run any more, otherwise a high-level
driver like pci_hyperv, which may be infinitely waiting for the host VSP's
response and notices the channel has been rescinded, can't safely give
up: e.g., in hv_pci_protocol_negotiation() -> wait_for_response(), it's
unsafe to exit from wait_for_response() and proceed with the on-stack
variable "comp_pkt" popped. The issue was originally spotted by
Michael Kelley <mikelley@microsoft.com>.

In vmbus_close_internal(), the patch also minimizes the range protected by
disabling/enabling channel->callback_event: we don't really need that for
the whole function.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uart: fix race between uart_put_char() and uart_shutdown()

commit a5ba1d95e46ecaea638ddd7cd144107c783acb5d upstream.

We have reports of the following crash:

    PID: 7 TASK: ffff88085c6d61c0 CPU: 1 COMMAND: "kworker/u25:0"
    #0 [ffff88085c6db710] machine_kexec at ffffffff81046239
    #1 [ffff88085c6db760] crash_kexec at ffffffff810fc248
    #2 [ffff88085c6db830] oops_end at ffffffff81008ae7
    #3 [ffff88085c6db860] no_context at ffffffff81050b8f
    #4 [ffff88085c6db8b0] __bad_area_nosemaphore at ffffffff81050d75
    #5 [ffff88085c6db900] bad_area_nosemaphore at ffffffff81050e83
    #6 [ffff88085c6db910] __do_page_fault at ffffffff8105132e
    #7 [ffff88085c6db9b0] do_page_fault at ffffffff8105152c
    #8 [ffff88085c6db9c0] page_fault at ffffffff81a3f122
    [exception RIP: uart_put_char+149]
    RIP: ffffffff814b67b5 RSP: ffff88085c6dba78 RFLAGS: 00010006
    RAX: 0000000000000292 RBX: ffffffff827c5120 RCX: 0000000000000081
    RDX: 0000000000000000 RSI: 000000000000005f RDI: ffffffff827c5120
    RBP: ffff88085c6dba98 R8: 000000000000012c R9: ffffffff822ea320
    R10: ffff88085fe4db04 R11: 0000000000000001 R12: ffff881059f9c000
    R13: 0000000000000001 R14: 000000000000005f R15: 0000000000000fba
    ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
    #9 [ffff88085c6dbaa0] tty_put_char at ffffffff81497544
    #10 [ffff88085c6dbac0] do_output_char at ffffffff8149c91c
    #11 [ffff88085c6dbae0] __process_echoes at ffffffff8149cb8b
    #12 [ffff88085c6dbb30] commit_echoes at ffffffff8149cdc2
    #13 [ffff88085c6dbb60] n_tty_receive_buf_fast at ffffffff8149e49b
    #14 [ffff88085c6dbbc0] __receive_buf at ffffffff8149ef5a
    #15 [ffff88085c6dbc20] n_tty_receive_buf_common at ffffffff8149f016
    #16 [ffff88085c6dbca0] n_tty_receive_buf2 at ffffffff8149f194
    #17 [ffff88085c6dbcb0] flush_to_ldisc at ffffffff814a238a
    #18 [ffff88085c6dbd50] process_one_work at ffffffff81090be2
    #19 [ffff88085c6dbe20] worker_thread at ffffffff81091b4d
    #20 [ffff88085c6dbeb0] kthread at ffffffff81096384
    #21 [ffff88085c6dbf50] ret_from_fork at ffffffff81a3d69f

after slogging through some dissasembly:

ffffffff814b6720 <uart_put_char>:
ffffffff814b6720: 55                    push   %rbp
ffffffff814b6721: 48 89 e5              mov    %rsp,%rbp
ffffffff814b6724: 48 83 ec 20           sub    $0x20,%rsp
ffffffff814b6728: 48 89 1c 24           mov    %rbx,(%rsp)
ffffffff814b672c: 4c 89 64 24 08        mov    %r12,0x8(%rsp)
ffffffff814b6731: 4c 89 6c 24 10        mov    %r13,0x10(%rsp)
ffffffff814b6736: 4c 89 74 24 18        mov    %r14,0x18(%rsp)
ffffffff814b673b: e8 b0 8e 58 00        callq  ffffffff81a3f5f0 <mcount>
ffffffff814b6740: 4c 8b a7 88 02 00 00 mov    0x288(%rdi),%r12
ffffffff814b6747: 45 31 ed              xor    %r13d,%r13d
ffffffff814b674a: 41 89 f6              mov    %esi,%r14d
ffffffff814b674d: 49 83 bc 24 70 01 00 cmpq   $0x0,0x170(%r12)
ffffffff814b6754: 00 00
ffffffff814b6756: 49 8b 9c 24 80 01 00 mov    0x180(%r12),%rbx
ffffffff814b675d: 00
ffffffff814b675e: 74 2f                 je     ffffffff814b678f <uart_put_char+0x6f>
ffffffff814b6760: 48 89 df              mov    %rbx,%rdi
ffffffff814b6763: e8 a8 67 58 00        callq  ffffffff81a3cf10 <_raw_spin_lock_irqsave>
ffffffff814b6768: 41 8b 8c 24 78 01 00 mov    0x178(%r12),%ecx
ffffffff814b676f: 00
ffffffff814b6770: 89 ca                 mov    %ecx,%edx
ffffffff814b6772: f7 d2                 not    %edx
ffffffff814b6774: 41 03 94 24 7c 01 00 add    0x17c(%r12),%edx
ffffffff814b677b: 00
ffffffff814b677c: 81 e2 ff 0f 00 00     and    $0xfff,%edx
ffffffff814b6782: 75 23                 jne    ffffffff814b67a7 <uart_put_char+0x87>
ffffffff814b6784: 48 89 c6              mov    %rax,%rsi
ffffffff814b6787: 48 89 df              mov    %rbx,%rdi
ffffffff814b678a: e8 e1 64 58 00        callq  ffffffff81a3cc70 <_raw_spin_unlock_irqrestore>
ffffffff814b678f: 44 89 e8              mov    %r13d,%eax
ffffffff814b6792: 48 8b 1c 24           mov    (%rsp),%rbx
ffffffff814b6796: 4c 8b 64 24 08        mov    0x8(%rsp),%r12
ffffffff814b679b: 4c 8b 6c 24 10        mov    0x10(%rsp),%r13
ffffffff814b67a0: 4c 8b 74 24 18        mov    0x18(%rsp),%r14
ffffffff814b67a5: c9                    leaveq
ffffffff814b67a6: c3                    retq
ffffffff814b67a7: 49 8b 94 24 70 01 00 mov    0x170(%r12),%rdx
ffffffff814b67ae: 00
ffffffff814b67af: 48 63 c9              movslq %ecx,%rcx
ffffffff814b67b2: 41 b5 01              mov    $0x1,%r13b
ffffffff814b67b5: 44 88 34 0a           mov    %r14b,(%rdx,%rcx,1)
ffffffff814b67b9: 41 8b 94 24 78 01 00 mov    0x178(%r12),%edx
ffffffff814b67c0: 00
ffffffff814b67c1: 83 c2 01              add    $0x1,%edx
ffffffff814b67c4: 81 e2 ff 0f 00 00     and    $0xfff,%edx
ffffffff814b67ca: 41 89 94 24 78 01 00 mov    %edx,0x178(%r12)
ffffffff814b67d1: 00
ffffffff814b67d2: eb b0                 jmp    ffffffff814b6784 <uart_put_char+0x64>
ffffffff814b67d4: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1)
ffffffff814b67db: 00 00 00 00 00

for our build, this is crashing at:

    circ->buf[circ->head] = c;

Looking in uart_port_startup(), it seems that circ->buf (state->xmit.buf)
protected by the "per-port mutex", which based on uart_port_check() is
state->port.mutex. Indeed, the lock acquired in uart_put_char() is
uport->lock, i.e. not the same lock.

Anyway, since the lock is not acquired, if uart_shutdown() is called, the
last chunk of that function may release state->xmit.buf before its assigned
to null, and cause the race above.

To fix it, let's lock uport->lock when allocating/deallocating
state->xmit.buf in addition to the per-port mutex.

v2: switch to locking uport->lock on allocation/deallocation instead of
    locking the per-port mutex in uart_put_char. Note that since
    uport->lock is a spin lock, we have to switch the allocation to
    GFP_ATOMIC.
v3: move the allocation outside the lock, so we can switch back to
    GFP_KERNEL

Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm crypt: don't decrease device limits

commit bc9e9cf0401f18e33b78d4c8a518661b8346baf7 upstream.

dm-crypt should only increase device limits, it should not decrease them.

This fixes a bug where the user could creates a crypt device with 1024
sector size on the top of scsi device that had 4096 logical block size.
The limit 4096 would be lost and the user could incorrectly send
1024-I/Os to the crypt device.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache metadata: set dirty on all cache blocks after a crash

commit 5b1fe7bec8a8d0cc547a22e7ddc2bd59acd67de4 upstream.

Quoting Documentation/device-mapper/cache.txt:

  The 'dirty' state for a cache block changes far too frequently for us
  to keep updating it on the fly.  So we treat it as a hint.  In normal
  operation it will be written when the dm device is suspended.  If the
  system crashes all cache blocks will be assumed dirty when restarted.

This got broken in commit f177940a8091 ("dm cache metadata: switch to
using the new cursor api for loading metadata") in 4.9, which removed
the code that consulted cmd->clean_when_opened (CLEAN_SHUTDOWN on-disk
flag) when loading cache blocks.  This results in data corruption on an
unclean shutdown with dirty cache blocks on the fast device.  After the
crash those blocks are considered clean and may get evicted from the
cache at any time.  This can be demonstrated by doing a lot of reads
to trigger individual evictions, but uncache is more predictable:

  ### Disable auto-activation in lvm.conf to be able to do uncache in
  ### time (i.e. see uncache doing flushing) when the fix is applied.

  # xfs_io -d -c 'pwrite -b 4M -S 0xaa 0 1G' /dev/vdb
  # vgcreate vg_cache /dev/vdb /dev/vdc
  # lvcreate -L 1G -n lv_slowdev vg_cache /dev/vdb
  # lvcreate -L 512M -n lv_cachedev vg_cache /dev/vdc
  # lvcreate -L 256M -n lv_metadev vg_cache /dev/vdc
  # lvconvert --type cache-pool --cachemode writeback vg_cache/lv_cachedev --poolmetadata vg_cache/lv_metadev
  # lvconvert --type cache vg_cache/lv_slowdev --cachepool vg_cache/lv_cachedev
  # xfs_io -d -c 'pwrite -b 4M -S 0xbb 0 512M' /dev/mapper/vg_cache-lv_slowdev
  # xfs_io -d -c 'pread -v 254M 512' /dev/mapper/vg_cache-lv_slowdev | head -n 2
  0fe00000:  bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
  0fe00010:  bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
  # dmsetup status vg_cache-lv_slowdev
  0 2097152 cache 8 27/65536 128 8192/8192 1 100 0 0 0 8192 7065 2 metadata2 writeback 2 migration_threshold 2048 smq 0 rw -
                                                            ^^^^
                                7065 * 64k = 441M yet to be written to the slow device
  # echo b >/proc/sysrq-trigger

  # vgchange -ay vg_cache
  # xfs_io -d -c 'pread -v 254M 512' /dev/mapper/vg_cache-lv_slowdev | head -n 2
  0fe00000:  bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
  0fe00010:  bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
  # lvconvert --uncache vg_cache/lv_slowdev
  Flushing 0 blocks for cache vg_cache/lv_slowdev.
  Logical volume "lv_cachedev" successfully removed
  Logical volume vg_cache/lv_slowdev is not cached.
  # xfs_io -d -c 'pread -v 254M 512' /dev/mapper/vg_cache-lv_slowdev | head -n 2
  0fe00000:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
  0fe00010:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................

This is the case with both v1 and v2 cache pool metatata formats.

After applying this patch:

  # vgchange -ay vg_cache
  # xfs_io -d -c 'pread -v 254M 512' /dev/mapper/vg_cache-lv_slowdev | head -n 2
  0fe00000:  bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
  0fe00010:  bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
  # lvconvert --uncache vg_cache/lv_slowdev
  Flushing 3724 blocks for cache vg_cache/lv_slowdev.
  ...
  Flushing 71 blocks for cache vg_cache/lv_slowdev.
  Logical volume "lv_cachedev" successfully removed
  Logical volume vg_cache/lv_slowdev is not cached.
  # xfs_io -d -c 'pread -v 254M 512' /dev/mapper/vg_cache-lv_slowdev | head -n 2
  0fe00000:  bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
  0fe00010:  bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................

Cc: stable@vger.kernel.org
Fixes: f177940a8091 ("dm cache metadata: switch to using the new cursor api for loading metadata")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache metadata: save in-core policy_hint_size to on-disk superblock

commit fd2fa95416188a767a63979296fa3e169a9ef5ec upstream.

policy_hint_size starts as 0 during __write_initial_superblock().  It
isn't until the policy is loaded that policy_hint_size is set in-core
(cmd->policy_hint_size).  But it never got recorded in the on-disk
superblock because __commit_transaction() didn't deal with transfering
the in-core cmd->policy_hint_size to the on-disk superblock.

The in-core cmd->policy_hint_size gets initialized by metadata_open()'s
__begin_transaction_flags() which re-reads all superblock fields.
Because the superblock's policy_hint_size was never properly stored, when
the cache was created, hints_array_available() would always return false
when re-activating a previously created cache.  This means
__load_mappings() always considered the hints invalid and never made use
of the hints (these hints served to optimize).

Another detremental side-effect of this oversight is the cache_check
utility would fail with: "invalid hint width: 0"

Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin: stop no_space_timeout worker when switching to write-mode

commit 75294442d896f2767be34f75aca7cc2b0d01301f upstream.

Now both check_for_space() and do_no_space_timeout() will read & write
pool->pf.error_if_no_space.  If these functions run concurrently, as
shown in the following case, the default setting of "queue_if_no_space"
can get lost.

precondition:
    * error_if_no_space = false (aka "queue_if_no_space")
    * pool is in Out-of-Data-Space (OODS) mode
    * no_space_timeout worker has been queued

CPU 0:                          CPU 1:
// delete a thin device
process_delete_mesg()
// check_for_space() invoked by commit()
set_pool_mode(pool, PM_WRITE)
    pool->pf.error_if_no_space = \
     pt->requested_pf.error_if_no_space

// timeout, pool is still in OODS mode
do_no_space_timeout
    // "queue_if_no_space" config is lost
    pool->pf.error_if_no_space = true
    pool->pf.mode = new_mode

Fix it by stopping no_space_timeout worker when switching to write mode.

Fixes: bcc696fac11f ("dm thin: stay in out-of-data-space mode once no_space_timeout expires")
Cc: stable@vger.kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm integrity: change 'suspending' variable from bool to int

commit c21b16392701543d61e366dca84e15fe7f0cf0cf upstream.

Early alpha processors can't write a byte or short atomically - they
read 8 bytes, modify the byte or two bytes in registers and write back
8 bytes.

The modification of the variable "suspending" may race with
modification of the variable "failed". Fix this by changing
"suspending" to an int.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/9p/trans_fd.c: fix race-condition by flushing workqueue before the kfree()

commit 430ac66eb4c5b5c4eb846b78ebf65747510b30f1 upstream.

The patch adds the flush in p9_mux_poll_stop() as it the function used by
p9_conn_destroy(), in turn called by p9_fd_close() to stop the async
polling associated with the data regarding the connection.

Link: http://lkml.kernel.org/r/20180720092730.27104-1-tomasbortoli@gmail.com
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+39749ed7d9ef6dfb23f6@syzkaller.appspotmail.com
To: Eric Van Hensbergen <ericvh@gmail.com>
To: Ron Minnich <rminnich@sandia.gov>
To: Latchesar Ionkov <lucho@ionkov.net>
Cc: Yiwen Jiang <jiangyiwen@huwei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/9p/client.c: version pointer uninitialized

commit 7913690dcc5e18e235769fd87c34143072f5dbea upstream.

The p9_client_version() does not initialize the version pointer. If the
call to p9pdu_readf() returns an error and version has not been allocated
in p9pdu_readf(), then the program will jump to the "error" label and will
try to free the version pointer. If version is not initialized, free()
will be called with uninitialized, garbage data and will provoke a crash.

Link: http://lkml.kernel.org/r/20180709222943.19503-1-tomasbortoli@gmail.com
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+65c6b72f284a39d416b4@syzkaller.appspotmail.com
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p/virtio: fix off-by-one error in sg list bounds check

commit 23cba9cbde0bba05d772b335fe5f66aa82b9ad19 upstream.

Because the value of limit is VIRTQUEUE_NUM, if index is equal to
limit, it will cause sg array out of bounds, so correct the judgement
of BUG_ON.

Link: http://lkml.kernel.org/r/5B63D5F6.6080109@huawei.com
Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reported-By: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jun Piao <piaojun@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/9p/xattr.c: catch the error of p9_client_clunk when setting xattr failed

commit 3111784bee81591ea2815011688d28b65df03627 upstream.

In my testing, v9fs_fid_xattr_set will return successfully even if the
backend ext4 filesystem has no space to store xattr key-value. That will
cause inconsistent behavior between front end and back end. The reason is
that lsetxattr will be triggered by p9_client_clunk, and unfortunately we
did not catch the error. This patch will catch the error to notify upper
caller.

p9_client_clunk (in 9p)
  p9_client_rpc(clnt, P9_TCLUNK, "d", fid->fid);
    v9fs_clunk (in qemu)
      put_fid
        free_fid
          v9fs_xattr_fid_clunk
            v9fs_co_lsetxattr
              s->ops->lsetxattr
                ext4_xattr_user_set (in host ext4 filesystem)

Link: http://lkml.kernel.org/r/5B57EACC.2060900@huawei.com
Signed-off-by: Jun Piao <piaojun@huawei.com>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p: fix multiple NULL-pointer-dereferences

commit 10aa14527f458e9867cf3d2cc6b8cb0f6704448b upstream.

Added checks to prevent GPFs from raising.

Link: http://lkml.kernel.org/r/20180727110558.5479-1-tomasbortoli@gmail.com
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+1a262da37d3bead15c39@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/rxe: Set wqe->status correctly if an unexpected response is received

commit 61b717d041b1976530f68f8b539b2e3a7dd8e39c upstream.

Every function that returns COMPST_ERROR must set wqe->status to another
value than IB_WC_SUCCESS before returning COMPST_ERROR. Fix the only code
path for which this is not yet the case.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ib_srpt: Fix a use-after-free in srpt_close_ch()

commit 995250959d22fc341b5424e3343b0ce5df672461 upstream.

Avoid that KASAN reports the following:

BUG: KASAN: use-after-free in srpt_close_ch+0x4f/0x1b0 [ib_srpt]
Read of size 4 at addr ffff880151180cb8 by task check/4681

CPU: 15 PID: 4681 Comm: check Not tainted 4.18.0-rc2-dbg+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0xa4/0xf5
print_address_description+0x6f/0x270
kasan_report+0x241/0x360
__asan_load4+0x78/0x80
srpt_close_ch+0x4f/0x1b0 [ib_srpt]
srpt_set_enabled+0xf7/0x1e0 [ib_srpt]
srpt_tpg_enable_store+0xb8/0x120 [ib_srpt]
configfs_write_file+0x14e/0x1d0 [configfs]
__vfs_write+0xd2/0x3b0
vfs_write+0x101/0x270
ksys_write+0xab/0x120
__x64_sys_write+0x43/0x50
do_syscall_64+0x77/0x230
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: aaf45bd83eba ("IB/srpt: Detect session shutdown reliably")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl: Fix wrong comparison in cxl_adapter_context_get()

commit ef6cb5f1a048fdf91ccee6d63d2bfa293338502d upstream.

Function atomic_inc_unless_negative() returns a bool to indicate
success/failure. However cxl_adapter_context_get() wrongly compares
the return value against '>=0' which will always be true. The patch
fixes this comparison to '==0' there by also fixing this compile time
warning:

drivers/misc/cxl/main.c:290 cxl_adapter_context_get()
warn: 'atomic_inc_unless_negative(&adapter->contexts_num)' is unsigned

Fixes: 70b565bbdb91 ("cxl: Prevent adapter reset if an active context exists")
Cc: stable@vger.kernel.org # v4.9+
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv/pci: Work around races in PCI bridge enabling

commit db2173198b9513f7add8009f225afa1f1c79bcc6 upstream.

The generic code is racy when multiple children of a PCI bridge try to
enable it simultaneously.

This leads to drivers trying to access a device through a
not-yet-enabled bridge, and this EEH errors under various
circumstances when using parallel driver probing.

There is work going on to fix that properly in the PCI core but it
will take some time.

x86 gets away with it because (outside of hotplug), the BIOS enables
all the bridges at boot time.

This patch does the same thing on powernv by enabling all bridges that
have child devices at boot time, thus avoiding subsequent races. It's
suitable for backporting to stable and distros, while the proper PCI
fix will probably be significantly more invasive.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add wrappers for dev_printk()

commit 7506dc7989933235e6fc23f3d0516bdbf0f7d1a8 upstream.

Add PCI-specific dev_printk() wrappers and use them to simplify the code
slightly. No functional change intended.

Signed-off-by: Frederick Lawler <fred@fredlawl.com>
[bhelgaas: squash into one patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[only take the pci.h portion of this patch, to make backporting stuff
easier over time - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/pseries: Fix endianness while restoring of r3 in MCE handler.

commit cd813e1cd7122f2c261dce5b54d1e0c97f80e1a5 upstream.

During Machine Check interrupt on pseries platform, register r3 points
RTAS extended event log passed by hypervisor. Since hypervisor uses r3
to pass pointer to rtas log, it stores the original r3 value at the
start of the memory (first 8 bytes) pointed by r3. Since hypervisor
stores this info and rtas log is in BE format, linux should make
sure to restore r3 value in correct endian format.

Without this patch when MCE handler, after recovery, returns to code that
that caused the MCE may end up with Data SLB access interrupt for invalid
address followed by kernel panic or hang.

  Severe Machine check interrupt [Recovered]
    NIP [d00000000ca301b8]: init_module+0x1b8/0x338 [bork_kernel]
    Initiator: CPU
    Error type: SLB [Multihit]
      Effective address: d00000000ca70000
  cpu 0xa: Vector: 380 (Data SLB Access) at [c0000000fc7775b0]
      pc: c0000000009694c0: vsnprintf+0x80/0x480
      lr: c0000000009698e0: vscnprintf+0x20/0x60
      sp: c0000000fc777830
     msr: 8000000002009033
     dar: a803a30c000000d0
    current = 0xc00000000bc9ef00
    paca    = 0xc00000001eca5c00 softe: 3 irq_happened: 0x01
      pid   = 8860, comm = insmod
  vscnprintf+0x20/0x60
  vprintk_emit+0xb4/0x4b0
  vprintk_func+0x5c/0xd0
  printk+0x38/0x4c
  init_module+0x1c0/0x338 [bork_kernel]
  do_one_initcall+0x54/0x230
  do_init_module+0x8c/0x248
  load_module+0x12b8/0x15b0
  sys_finit_module+0xa8/0x110
  system_call+0x58/0x6c
  --- Exception: c00 (System Call) at 00007fff8bda0644
  SP (7fffdfbfe980) is in userspace

This patch fixes this issue.

Fixes: a08a53ea4c97 ("powerpc/le: Enable RTAS events support")
Cc: stable@vger.kernel.org # v3.15+
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/fadump: handle crash memory ranges array index overflow

commit 1bd6a1c4b80a28d975287630644e6b47d0f977a5 upstream.

Crash memory ranges is an array of memory ranges of the crashing kernel
to be exported as a dump via /proc/vmcore file. The size of the array
is set based on INIT_MEMBLOCK_REGIONS, which works alright in most cases
where memblock memory regions count is less than INIT_MEMBLOCK_REGIONS
value. But this count can grow beyond INIT_MEMBLOCK_REGIONS value since
commit 142b45a72e22 ("memblock: Add array resizing support").

On large memory systems with a few DLPAR operations, the memblock memory
regions count could be larger than INIT_MEMBLOCK_REGIONS value. On such
systems, registering fadump results in crash or other system failures
like below:

  task: c00007f39a290010 ti: c00000000b738000 task.ti: c00000000b738000
  NIP: c000000000047df4 LR: c0000000000f9e58 CTR: c00000000010f180
  REGS: c00000000b73b570 TRAP: 0300   Tainted: G          L   X  (4.4.140+)
  MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 22004484  XER: 20000000
  CFAR: c000000000008500 DAR: 000007a450000000 DSISR: 40000000 SOFTE: 0
  ...
  NIP [c000000000047df4] smp_send_reschedule+0x24/0x80
  LR [c0000000000f9e58] resched_curr+0x138/0x160
  Call Trace:
    resched_curr+0x138/0x160 (unreliable)
    check_preempt_curr+0xc8/0xf0
    ttwu_do_wakeup+0x38/0x150
    try_to_wake_up+0x224/0x4d0
    __wake_up_common+0x94/0x100
    ep_poll_callback+0xac/0x1c0
    __wake_up_common+0x94/0x100
    __wake_up_sync_key+0x70/0xa0
    sock_def_readable+0x58/0xa0
    unix_stream_sendmsg+0x2dc/0x4c0
    sock_sendmsg+0x68/0xa0
    ___sys_sendmsg+0x2cc/0x2e0
    __sys_sendmsg+0x5c/0xc0
    SyS_socketcall+0x36c/0x3f0
    system_call+0x3c/0x100

as array index overflow is not checked for while setting up crash memory
ranges causing memory corruption. To resolve this issue, dynamically
allocate memory for crash memory ranges and resize it incrementally,
in units of pagesize, on hitting array size limit.

Fixes: 2df173d9e85d ("fadump: Initialize elfcore header and add PT_LOAD program headers.")
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
[mpe: Just use PAGE_SIZE directly, fixup variable placement]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix kexec forbidding kernels signed with keys in the secondary keyring to boot

commit ea93102f32244e3f45c8b26260be77ed0cc1d16c upstream.

The split of .system_keyring into .builtin_trusted_keys and
.secondary_trusted_keys broke kexec, thereby preventing kernels signed by
keys which are now in the secondary keyring from being kexec'd.

Fix this by passing VERIFY_USE_SECONDARY_KEYRING to
verify_pefile_signature().

Fixes: d3bfe84129f6 ("certs: Add a secondary system keyring that can be added to dynamically")
Signed-off-by: Yannik Sembritzki <yannik@sembritzki.me>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: kexec@lists.infradead.org
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace magic for trusting the secondary keyring with #define

commit 817aef260037f33ee0f44c17fe341323d3aebd6d upstream.

Replace the use of a magic number that indicates that verify_*_signature()
should use the secondary keyring with a symbol.

Signed-off-by: Yannik Sembritzki <yannik@sembritzki.me>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mailbox: xgene-slimpro: Fix potential NULL pointer dereference

commit 3512a18cbd8d09e22a790540cb9624c3c49827ba upstream.

There is a potential execution path in which function
platform_get_resource() returns NULL. If this happens,
we will end up having a NULL pointer dereference.

Fix this by replacing devm_ioremap with devm_ioremap_resource,
which has the NULL check and the memory region request.

This code was detected with the help of Coccinelle.

Cc: stable@vger.kernel.org
Fixes: f700e84f417b ("mailbox: Add support for APM X-Gene platform mailbox driver")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: Revert "[media] tvp5150: fix pad format frame height"

commit 1831af092308aa5a59ae61e47494e441c8be6b93 upstream.

This reverts commit 0866df8dffd514185bfab0d205db76e4c02cf1e4.

The v4l uAPI documentation [0] makes clear that in the case of interlaced
video (i.e: field is V4L2_FIELD_ALTERNATE) the height refers to the number
of lines in the field and not the number of lines in the full frame (which
is twice the field height for interlaced formats).

So the original height calculation was correct, and it shouldn't had been
changed by the mentioned commit.

[0]:https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/subdev-formats.html

Fixes: 0866df8dffd5 ("[media] tvp5150: fix pad format frame height")

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: <stable@vger.kernel.org> # for v4.12 and up
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libertas: fix suspend and resume for SDIO connected cards

commit 7444a8092906ed44c09459780c56ba57043e39b1 upstream.

Prior to commit 573185cc7e64 ("mmc: core: Invoke sdio func driver's PM
callbacks from the sdio bus"), the MMC core used to call into the power
management functions of SDIO clients itself and removed the card if the
return code was non-zero. IOW, the mmc handled errors gracefully and didn't
upchain them to the pm core.

Since this change, the mmc core relies on generic power management
functions which treat all errors as a reason to cancel the suspend
immediately. This causes suspend attempts to fail when the libertas
driver is loaded.

To fix this, power down the card explicitly in if_sdio_suspend() when we
know we're about to lose power and return success. Also set a flag in these
cases, and power up the card again in if_sdio_resume().

Fixes: 573185cc7e64 ("mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus")
Cc: <stable@vger.kernel.org>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Chris Ball <chris@printf.net>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/userptr: reject zero user_size

commit c11c7bfd213495784b22ef82a69b6489f8d0092f upstream.

Operating on a zero sized GEM userptr object will lead to explosions.

Fixes: 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
Testcase: igt/gem_userptr_blits/input-checking
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502195021.30900-1-matthew.auld@intel.com
Cc: Loic <hackurx@opensec.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: really disable runtime-pm for blk-mq

commit b233f127042dba991229e3882c6217c80492f6ef upstream.

Runtime PM isn't ready for blk-mq yet, and commit 765e40b675a9 ("block:
disable runtime-pm for blk-mq") tried to disable it. Unfortunately,
it can't take effect in that way since user space still can switch
it on via 'echo auto > /sys/block/sdN/device/power/control'.

This patch disables runtime-pm for blk-mq really by pm_runtime_disable()
and fixes all kinds of PM related kernel crash.

Cc: Tomas Janousek <tomi@nomi.cz>
Cc: Przemek Socha <soprwa@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: <stable@vger.kernel.org>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: blk_init_allocated_queue() set q->fq as NULL in the fail case

commit 54648cf1ec2d7f4b6a71767799c45676a138ca24 upstream.

We find the memory use-after-free issue in __blk_drain_queue()
on the kernel 4.14. After read the latest kernel 4.18-rc6 we
think it has the same problem.

Memory is allocated for q->fq in the blk_init_allocated_queue().
If the elevator init function called with error return, it will
run into the fail case to free the q->fq.

Then the __blk_drain_queue() uses the same memory after the free
of the q->fq, it will lead to the unpredictable event.

The patch is to set q->fq as NULL in the fail case of
blk_init_allocated_queue().

Fixes: commit 7c94e1c157a2 ("block: introduce blk_flush_queue to drive flush machinery")
Cc: <stable@vger.kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: xiao jin <jin.xiao@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

readahead: stricter check for bdi io_pages

commit dc30b96ab6d569060741572cf30517d3179429a8 upstream.

ondemand_readahead() checks bdi->io_pages to cap the maximum pages
that need to be processed. This works until the readit section. If
we would do an async only readahead (async size = sync size) and
target is at beginning of window we expand the pages by another
get_next_ra_size() pages. Btrace for large reads shows that kernel
always issues a doubled size read at the beginning of processing.
Add an additional check for io_pages in the lower part of the func.
The fix helps devices that hard limit bio pages and rely on proper
handling of max_hw_read_sectors (e.g. older FusionIO cards). For
that reason it could qualify for stable.

Fixes: 9491ae4a ("mm: don't cap request size based on read-ahead setting")
Cc: stable@vger.kernel.org
Signed-off-by: Markus Stockhausen stockhausen@collogia.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: renesas_sdhi_internal_dmac: fix #define RST_RESERVED_BITS

commit 9faf870e559a710c44e747ba20383ea82d8ac5d2 upstream.

The DM_CM_RST register actually has bits 0-31 defaulting to 1s and bits
32-63 defaulting to 0s -- fix off-by-one in #define RST_RESERVED_BITS.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Fixes: 2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: cadence: Change usleep_range() to udelay(), for atomic context

commit 931c4e9a72ae91d59c5332ffb6812911a749da8e upstream.

The path "spi: cadence: Add usleep_range() for
cdns_spi_fill_tx_fifo()" added a usleep_range() function call,
which cannot be used in atomic context.
However the cdns_spi_fill_tx_fifo() function can be called during
an interrupt which may result in a kernel panic:

BUG: scheduling while atomic: grep/561/0x00010002
Modules linked in:
Preemption disabled at:
[<ffffff800858ea28>] wait_for_common+0x48/0x178
CPU: 0 PID: 561 Comm: grep Not tainted 4.17.0 #1
Hardware name: Cadence CSP (DT)
Call trace:
dump_backtrace+0x0/0x198
show_stack+0x14/0x20
dump_stack+0x8c/0xac
__schedule_bug+0x6c/0xb8
__schedule+0x570/0x5d8
schedule+0x34/0x98
schedule_hrtimeout_range_clock+0x98/0x110
schedule_hrtimeout_range+0x10/0x18
usleep_range+0x64/0x98
cdns_spi_fill_tx_fifo+0x70/0xb0
cdns_spi_irq+0xd0/0xe0
__handle_irq_event_percpu+0x9c/0x128
handle_irq_event_percpu+0x34/0x88
handle_irq_event+0x48/0x78
handle_fasteoi_irq+0xbc/0x1b0
generic_handle_irq+0x24/0x38
__handle_domain_irq+0x84/0xf8
gic_handle_irq+0xc4/0x180

This patch replaces the function call with udelay() which can be
used in an atomic context, like an interrupt.

Signed-off-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: spi-fsl-dspi: Fix imprecise abort on VF500 during probe

commit d8ffee2f551a627ffb7b216e2da322cb9a037f77 upstream.

Registers of DSPI should not be accessed before enabling its clock.  On
Toradex Colibri VF50 on Iris carrier board this could be seen during
bootup as imprecise abort:

    Unhandled fault: imprecise external abort (0x1c06) at 0x00000000
    Internal error: : 1c06 [#1] ARM
    Modules linked in:
    CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.39-dirty #97
    Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
    Backtrace:
    [<804166a8>] (regmap_write) from [<80466b5c>] (dspi_probe+0x1f0/0x8dc)
    [<8046696c>] (dspi_probe) from [<8040107c>] (platform_drv_probe+0x54/0xb8)
    [<80401028>] (platform_drv_probe) from [<803ff53c>] (driver_probe_device+0x280/0x2f8)
    [<803ff2bc>] (driver_probe_device) from [<803ff674>] (__driver_attach+0xc0/0xc4)
    [<803ff5b4>] (__driver_attach) from [<803fd818>] (bus_for_each_dev+0x70/0xa4)
    [<803fd7a8>] (bus_for_each_dev) from [<803fee74>] (driver_attach+0x24/0x28)
    [<803fee50>] (driver_attach) from [<803fe980>] (bus_add_driver+0x1a0/0x218)
    [<803fe7e0>] (bus_add_driver) from [<803fffe8>] (driver_register+0x80/0x100)
    [<803fff68>] (driver_register) from [<80400fdc>] (__platform_driver_register+0x48/0x50)
    [<80400f94>] (__platform_driver_register) from [<8091cf7c>] (fsl_dspi_driver_init+0x1c/0x20)
    [<8091cf60>] (fsl_dspi_driver_init) from [<8010195c>] (do_one_initcall+0x4c/0x174)
    [<80101910>] (do_one_initcall) from [<80900e8c>] (kernel_init_freeable+0x144/0x1d8)
    [<80900d48>] (kernel_init_freeable) from [<805ff6a8>] (kernel_init+0x10/0x114)
    [<805ff698>] (kernel_init) from [<80107be8>] (ret_from_fork+0x14/0x2c)

Cc: <stable@vger.kernel.org>
Fixes: 5ee67b587a2b ("spi: dspi: clear SPI_SR before enable interrupt")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: pxa2xx: Add support for Intel Ice Lake

commit 22d71a5097ec7059b6cbbee678a4f88484695941 upstream.

Intel Ice Lake SPI host controller follows the Intel Cannon Lake but the
PCI IDs are different. Add the new PCI IDs to the driver supported
devices list.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: davinci: fix a NULL pointer dereference

commit 563a53f3906a6b43692498e5b3ae891fac93a4af upstream.

On non-OF systems spi->controlled_data may be NULL. This causes a NULL
pointer derefence on dm365-evm.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p/net: Fix zero-copy path in the 9p virtio transport

commit d28c756caee6e414d9ba367d0b92da24145af2a8 upstream.

The zero-copy optimization when reading or writing large chunks of data
is quite useful. However, the 9p messages created through the zero-copy
write path have an incorrect message size: it should be the size of the
header + size of the data being written but instead it's just the size
of the header.

This only works if the server ignores the size field of the message and
otherwise breaks the framing of the protocol. Fix this by re-writing the
message size field with the correct value.

Tested by running `dd if=/dev/zero of=out bs=4k count=1` inside a
virtio-9p mount.

Link: http://lkml.kernel.org/r/20180717003529.114368-1-chirantan@chromium.org
Signed-off-by: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Cc: Dylan Reid <dgreid@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mac802154: tx: expand tailroom if necessary

commit f9c52831133050c6b82aa8b6831c92da2bbf2a0b upstream.

This patch is necessary if case of AF_PACKET or other socket interface
which I am aware of it and didn't allocated the necessary room.

Reported-by: David Palma <david.palma@ntnu.no>
Reported-by: Rabi Narayan Sahoo <rabinarayans0828@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: 6lowpan: fix reserved space for single frames

commit ac74f87c789af40936a80131c4759f3e72579c3a upstream.

This patch fixes patch add handling to take care tail and headroom for
single 6lowpan frames. We need to be sure we have a skb with the right
head and tailroom for single frames. This patch do it by using
skb_copy_expand() if head and tailroom is not enough allocated by upper
layer.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195059
Reported-by: David Palma <david.palma@ntnu.no>
Reported-by: Rabi Narayan Sahoo <rabinarayans0828@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.68

gcc-plugins: Use dynamic initializers

commit b86729109c5fd0a480300f40608aac68764b5adf upstream.

GCC 8 changed the order of some fields and is very picky about ordering
in static initializers, so instead just move to dynamic initializers,
and drop the redundant already-zero field assignments.

Suggested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Lance Albertson <lance@osuosl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc-plugins: Add include required by GCC release 8

commit 80d172431696482d9acd8d2c4ea78fed8956e2a1 upstream.

GCC requires another #include to get the gcc-plugins to build cleanly.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Lance Albertson <lance@osuosl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cdrom: Fix info leak/OOB read in cdrom_ioctl_drive_status

commit 8f3fafc9c2f0ece10832c25f7ffcb07c97a32ad4 upstream.

Like d88b6d04: "cdrom: information leak in cdrom_ioctl_media_changed()"

There is another cast from unsigned long to int which causes
a bounds check to fail with specially crafted input. The value is
then used as an index in the slot array in cdrom_slot_status().

Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Scott Bauer <sbauer@plzdonthack.me>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: Mark watchdog touch functions as notrace

commit cb9d7fd51d9fbb329d182423bd7b92d0f8cb0e01 upstream.

Some architectures need to use stop_machine() to patch functions for
ftrace, and the assumption is that the stopped CPUs do not make function
calls to traceable functions when they are in the stopped state.

Commit ce4f06dcbb5d ("stop_machine: Touch_nmi_watchdog() after
MULTI_STOP_PREPARE") added calls to the watchdog touch functions from
the stopped CPUs and those functions lack notrace annotations. This
leads to crashes when enabling/disabling ftrace on ARM kernels built
with the Thumb-2 instruction set.

Fix it by adding the necessary notrace annotations.

Fixes: ce4f06dcbb5d ("stop_machine: Touch_nmi_watchdog() after MULTI_STOP_PREPARE")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: oleg@redhat.com
Cc: tj@kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180821152507.18313-1-vincent.whitchurch@axis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: generic-adc-battery: check for duplicate properties copied from iio channels

commit a427503edaaed9b75ed9746a654cece7e93e60a8 upstream.

If an iio channel defines a basic property, there are duplicate entries
in /sys/class/power/*/uevent.

So add a check to avoid duplicates. Since all channels may be duplicates,
we have to modify the related error check.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: stable@vger.kernel.org
Fixes: e60fea794e6e ("power: battery: Generic battery driver using IIO")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: generic-adc-battery: fix out-of-bounds write when copying channel properties

commit 932d47448c3caa0fa99e84d7f5bc302aa286efd8 upstream.

We did have sporadic problems in the pinctrl framework during boot
where a pin group name unexpectedly became NULL leading to a NULL
dereference in strcmp.

Detailled analysis of the failing cases did reveal that there were
two devm allocated objects close to each other. The second one was
the affected group_desc in pinmux and the first one was the
psy_desc->properties buffer of the gab driver.

Review of the gab code showed that the address calculation for
one memcpy() is wrong. It does

properties + sizeof(type) * index

but C is defined to do the index multiplication already for
pointer + integer additions. Hence the factor was applied twice
and the memcpy() does write outside of the properties buffer.
Sometimes it happened to be the pinctrl and triggered the strcmp(NULL).

Anyways, it is overkill to use a memcpy() here instead of a simple
assignment, which is easier to read and has less risk for wrong
address calculations. So we change code to a simple assignment.

If we initialize the index to the first free location, we can even
remove the local variable 'properties'.

This bug seems to exist right from the beginning in 3.7-rc1 in

commit e60fea794e6e ("power: battery: Generic battery driver using IIO")

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: stable@vger.kernel.org
Fixes: e60fea794e6e ("power: battery: Generic battery driver using IIO")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / clk: signedness bug in of_pm_clk_add_clks()

commit 5e2e2f9f76e157063a656351728703cb02b068f1 upstream.

"count" needs to be signed for the error handling to work. I made "i"
signed as well so they match.

Fixes: 02113ba93ea4 (PM / clk: Add support for obtaining clocks from device-tree)
Cc: 4.6+ <stable@vger.kernel.org> # 4.6+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: rockchip: fix clk_i2sout parent selection bits on rk3399

commit a64ad008980c65d38e6cf6858429c78e6b740c41 upstream.

Register, shift and mask were wrong according to datasheet.

Fixes: 115510053e5e ("clk: rockchip: add clock controller for the RK3399")
Cc: stable@vger.kernel.org
Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iscsi target: fix session creation failure handling

commit 26abc916a898d34c5ad159315a2f683def3c5555 upstream.

The problem is that iscsi_login_zero_tsih_s1 sets conn->sess early in
iscsi_login_set_conn_values. If the function fails later like when we
alloc the idr it does kfree(sess) and leaves the conn->sess pointer set.
iscsi_login_zero_tsih_s1 then returns -Exyz and we then call
iscsi_target_login_sess_out and access the freed memory.

This patch has iscsi_login_zero_tsih_s1 either completely setup the
session or completely tear it down, so later in
iscsi_target_login_sess_out we can just check for it being set to the
connection.

Cc: stable@vger.kernel.org
Fixes: 0957627a9960 ("iscsi-target: Fix sess allocation leak in...")
Signed-off-by: Mike Christie <mchristi@redhat.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: core: Avoid that SCSI device removal through sysfs triggers a deadlock

commit 0ee223b2e1f67cb2de9c0e3247c510d846e74d63 upstream.

A long time ago the unfortunate decision was taken to add a self-deletion
attribute to the sysfs SCSI device directory. That decision was unfortunate
because self-deletion is really tricky. We can't drop that attribute
because widely used user space software depends on it, namely the
rescan-scsi-bus.sh script. Hence this patch that avoids that writing into
that attribute triggers a deadlock. See also commit 7973cbd9fbd9 ("[PATCH]
add sysfs attributes to scan and delete scsi_devices").

This patch avoids that self-removal triggers the following deadlock:

======================================================
WARNING: possible circular locking dependency detected
4.18.0-rc2-dbg+ #5 Not tainted
------------------------------------------------------
modprobe/6539 is trying to acquire lock:
000000008323c4cd (kn->count#202){++++}, at: kernfs_remove_by_name_ns+0x45/0x90

but task is already holding lock:
00000000a6ec2c69 (&shost->scan_mutex){+.+.}, at: scsi_remove_host+0x21/0x150 [scsi_mod]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&shost->scan_mutex){+.+.}:
       __mutex_lock+0xfe/0xc70
       mutex_lock_nested+0x1b/0x20
       scsi_remove_device+0x26/0x40 [scsi_mod]
       sdev_store_delete+0x27/0x30 [scsi_mod]
       dev_attr_store+0x3e/0x50
       sysfs_kf_write+0x87/0xa0
       kernfs_fop_write+0x190/0x230
       __vfs_write+0xd2/0x3b0
       vfs_write+0x101/0x270
       ksys_write+0xab/0x120
       __x64_sys_write+0x43/0x50
       do_syscall_64+0x77/0x230
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

-> #0 (kn->count#202){++++}:
       lock_acquire+0xd2/0x260
       __kernfs_remove+0x424/0x4a0
       kernfs_remove_by_name_ns+0x45/0x90
       remove_files.isra.1+0x3a/0x90
       sysfs_remove_group+0x5c/0xc0
       sysfs_remove_groups+0x39/0x60
       device_remove_attrs+0x82/0xb0
       device_del+0x251/0x580
       __scsi_remove_device+0x19f/0x1d0 [scsi_mod]
       scsi_forget_host+0x37/0xb0 [scsi_mod]
       scsi_remove_host+0x9b/0x150 [scsi_mod]
       sdebug_driver_remove+0x4b/0x150 [scsi_debug]
       device_release_driver_internal+0x241/0x360
       device_release_driver+0x12/0x20
       bus_remove_device+0x1bc/0x290
       device_del+0x259/0x580
       device_unregister+0x1a/0x70
       sdebug_remove_adapter+0x8b/0xf0 [scsi_debug]
       scsi_debug_exit+0x76/0xe8 [scsi_debug]
       __x64_sys_delete_module+0x1c1/0x280
       do_syscall_64+0x77/0x230
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

other info that might help us debug this:

Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&shost->scan_mutex);
                               lock(kn->count#202);
                               lock(&shost->scan_mutex);
  lock(kn->count#202);

*** DEADLOCK ***

2 locks held by modprobe/6539:
#0: 00000000efaf9298 (&dev->mutex){....}, at: device_release_driver_internal+0x68/0x360
#1: 00000000a6ec2c69 (&shost->scan_mutex){+.+.}, at: scsi_remove_host+0x21/0x150 [scsi_mod]

stack backtrace:
CPU: 10 PID: 6539 Comm: modprobe Not tainted 4.18.0-rc2-dbg+ #5
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0xa4/0xf5
print_circular_bug.isra.34+0x213/0x221
__lock_acquire+0x1a7e/0x1b50
lock_acquire+0xd2/0x260
__kernfs_remove+0x424/0x4a0
kernfs_remove_by_name_ns+0x45/0x90
remove_files.isra.1+0x3a/0x90
sysfs_remove_group+0x5c/0xc0
sysfs_remove_groups+0x39/0x60
device_remove_attrs+0x82/0xb0
device_del+0x251/0x580
__scsi_remove_device+0x19f/0x1d0 [scsi_mod]
scsi_forget_host+0x37/0xb0 [scsi_mod]
scsi_remove_host+0x9b/0x150 [scsi_mod]
sdebug_driver_remove+0x4b/0x150 [scsi_debug]
device_release_driver_internal+0x241/0x360
device_release_driver+0x12/0x20
bus_remove_device+0x1bc/0x290
device_del+0x259/0x580
device_unregister+0x1a/0x70
sdebug_remove_adapter+0x8b/0xf0 [scsi_debug]
scsi_debug_exit+0x76/0xe8 [scsi_debug]
__x64_sys_delete_module+0x1c1/0x280
do_syscall_64+0x77/0x230
entry_SYSCALL_64_after_hwframe+0x49/0xbe

See also https://www.mail-archive.com/linux-scsi@vger.kernel.org/msg54525.html.

Fixes: ac0ece9174ac ("scsi: use device_remove_file_self() instead of device_schedule_callback()")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sysfs: Introduce sysfs_{un,}break_active_protection()

commit 2afc9166f79b8f6da5f347f48515215ceee4ae37 upstream.

Introduce these two functions and export them such that the next patch
can add calls to these functions from the SCSI core.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpt3sas: Fix _transport_smp_handler() error path

commit 91b7bdb2c0089cbbb817df6888ab1458c645184e upstream.

This patch avoids that smatch complains about a double unlock on
ioc->transport_cmds.mutex.

Fixes: 651a01364994 ("scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: Return the actual size when receiving an unsupported command

commit 36a11029b07ee30bdc4553274d0efea645ed9d91 upstream.

The userpace expects to read the number of bytes stated in the header.
Returning the size of the buffer instead would be unexpected.

Cc: stable@vger.kernel.org
Fixes: 095531f891e6 ("tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented")
Signed-off-by: Ricardo Schwarzmeier <Ricardo.Schwarzmeier@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: lib: Provide MIPS64r6 __multi3() for GCC < 7

commit 690d9163bf4b8563a2682e619f938e6a0443947f upstream.

Some versions of GCC suboptimally generate calls to the __multi3()
intrinsic for MIPS64r6 builds, resulting in link failures due to the
missing function:

    LD      vmlinux.o
    MODPOST vmlinux.o
  kernel/bpf/verifier.o: In function `kmalloc_array':
  include/linux/slab.h:631: undefined reference to `__multi3'
  fs/select.o: In function `kmalloc_array':
  include/linux/slab.h:631: undefined reference to `__multi3'
  ...

We already have a workaround for this in which we provide the
instrinsic, but we do so selectively for GCC 7 only. Unfortunately the
issue occurs with older GCC versions too - it has been observed with
both GCC 5.4.0 & GCC 6.4.0.

MIPSr6 support was introduced in GCC 5, so all major GCC versions prior
to GCC 8 are affected and we extend our workaround accordingly to all
MIPS64r6 builds using GCC versions older than GCC 8.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Vladimir Kondratiev <vladimir.kondratiev@intel.com>
Fixes: ebabcf17bcd7 ("MIPS: Implement __multi3 for GCC7 MIPS64r6 builds")
Patchwork: https://patchwork.linux-mips.org/patch/20297/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 4.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Change definition of cpu_relax() for Loongson-3

commit a30718868915fbb991a9ae9e45594b059f28e9ae upstream.

Linux expects that if a CPU modifies a memory location, then that
modification will eventually become visible to other CPUs in the system.

Loongson 3 CPUs include a Store Fill Buffer (SFB) which sits between a
core & its L1 data cache, queueing memory accesses & allowing for faster
forwarding of data from pending stores to younger loads from the core.
Unfortunately the SFB prioritizes loads such that a continuous stream of
loads may cause a pending write to be buffered indefinitely. This is
problematic if we end up with 2 CPUs which each perform a store that the
other polls for - one or both CPUs may end up with their stores buffered
in the SFB, never reaching cache due to the continuous reads from the
poll loop. Such a deadlock condition has been observed whilst running
qspinlock code.

This patch changes the definition of cpu_relax() to smp_mb() for
Loongson-3, forcing a flush of the SFB on SMP systems which will cause
any pending writes to make it as far as the L1 caches where they will
become visible to other CPUs. If the kernel is not compiled for SMP
support, this will expand to a barrier() as before.

This workaround matches that currently implemented for ARM when
CONFIG_ARM_ERRATA_754327=y, which was introduced by commit 534be1d5a2da
("ARM: 6194/1: change definition of cpu_relax() for ARM11MPCore").

Although the workaround is only required when the Loongson 3 SFB
functionality is enabled, and we only began explicitly enabling that
functionality in v4.7 with commit 1e820da3c9af ("MIPS: Loongson-3:
Introduce CONFIG_LOONGSON3_ENHANCEMENT"), existing or future firmware
may enable the SFB which means we may need the workaround backported to
earlier kernels too.

[paul.burton@mips.com:
- Reword commit message & comment.
- Limit stable backport to v3.15+ where we support Loongson 3 CPUs.]

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
References: 534be1d5a2da ("ARM: 6194/1: change definition of cpu_relax() for ARM11MPCore")
References: 1e820da3c9af ("MIPS: Loongson-3: Introduce CONFIG_LOONGSON3_ENHANCEMENT")
Patchwork: https://patchwork.linux-mips.org/patch/19830/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Always use -march=<arch>, not -<arch> shortcuts

commit 344ebf09949c31bcb8818d8458b65add29f1d67b upstream.

The VDSO Makefile filters CFLAGS to select a subset which it uses whilst
building the VDSO ELF. One of the flags it allows through is the -march=
flag that selects the architecture/ISA to target.

Unfortunately in cases where CONFIG_CPU_MIPS32_R{1,2}=y and the
toolchain defaults to building for MIPS64, the main MIPS Makefile ends
up using the short-form -<arch> flags in cflags-y. This is because the
calls to cc-option always fail to use the long-form -march=<arch> flag
due to the lack of an -mabi=<abi> flag in KBUILD_CFLAGS at the point
where the cc-option function is executed. The resulting GCC invocation
is something like:

  $ mips64-linux-gcc -Werror -march=mips32r2 -c -x c /dev/null -o tmp
  cc1: error: '-march=mips32r2' is not compatible with the selected ABI

These short-form -<arch> flags are dropped by the VDSO Makefile's
filtering, and so we attempt to build the VDSO without specifying any
architecture. This results in an attempt to build the VDSO using
whatever the compiler's default architecture is, regardless of whether
that is suitable for the kernel configuration.

One encountered build failure resulting from this mismatch is a
rejection of the sync instruction if the kernel is configured for a
MIPS32 or MIPS64 r1 or r2 target but the toolchain defaults to an older
architecture revision such as MIPS1 which did not include the sync
instruction:

    CC      arch/mips/vdso/gettimeofday.o
  /tmp/ccGQKoOj.s: Assembler messages:
  /tmp/ccGQKoOj.s:273: Error: opcode not supported on this processor: mips1 (mips1) `sync'
  /tmp/ccGQKoOj.s:329: Error: opcode not supported on this processor: mips1 (mips1) `sync'
  /tmp/ccGQKoOj.s:520: Error: opcode not supported on this processor: mips1 (mips1) `sync'
  /tmp/ccGQKoOj.s:714: Error: opcode not supported on this processor: mips1 (mips1) `sync'
  /tmp/ccGQKoOj.s:1009: Error: opcode not supported on this processor: mips1 (mips1) `sync'
  /tmp/ccGQKoOj.s:1066: Error: opcode not supported on this processor: mips1 (mips1) `sync'
  /tmp/ccGQKoOj.s:1114: Error: opcode not supported on this processor: mips1 (mips1) `sync'
  /tmp/ccGQKoOj.s:1279: Error: opcode not supported on this processor: mips1 (mips1) `sync'
  /tmp/ccGQKoOj.s:1334: Error: opcode not supported on this processor: mips1 (mips1) `sync'
  /tmp/ccGQKoOj.s:1374: Error: opcode not supported on this processor: mips1 (mips1) `sync'
  /tmp/ccGQKoOj.s:1459: Error: opcode not supported on this processor: mips1 (mips1) `sync'
  /tmp/ccGQKoOj.s:1514: Error: opcode not supported on this processor: mips1 (mips1) `sync'
  /tmp/ccGQKoOj.s:1814: Error: opcode not supported on this processor: mips1 (mips1) `sync'
  /tmp/ccGQKoOj.s:2002: Error: opcode not supported on this processor: mips1 (mips1) `sync'
  /tmp/ccGQKoOj.s:2066: Error: opcode not supported on this processor: mips1 (mips1) `sync'
  make[2]: *** [scripts/Makefile.build:318: arch/mips/vdso/gettimeofday.o] Error 1
  make[1]: *** [scripts/Makefile.build:558: arch/mips/vdso] Error 2
  make[1]: *** Waiting for unfinished jobs....

This can be reproduced for example by attempting to build
pistachio_defconfig using Arnd's GCC 8.1.0 mips64 toolchain from
kernel.org:

  https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/x86_64-gcc-8.1.0-nolibc-mips64-linux.tar.xz

Resolve this problem by using the long-form -march=<arch> in all cases,
which makes it through the arch/mips/vdso/Makefile's filtering & is thus
consistently used to build both the kernel proper & the VDSO.

The use of cc-option to prefer the long-form & fall back to the
short-form flags makes no sense since the short-form is just an
abbreviation for the also-supported long-form in all GCC versions that
we support building with. This means there is no case in which we have
to use the short-form -<arch> flags, so we can simply remove them.

The manual redefinition of _MIPS_ISA is removed naturally along with the
use of the short-form flags that it accompanied, and whilst here we
remove the separate assembler ISA selection. I suspect that both of
these were only required due to the mips32 vs mips2 mismatch that was
introduced by commit 59b3e8e9aac6 ("[MIPS] Makefile crapectomy.") and
fixed but not cleaned up by commit 9200c0b2a07c ("[MIPS] Fix Makefile
bugs for MIPS32/MIPS64 R1 and R2.").

I've marked this for backport as far as v4.4 where the MIPS VDSO was
introduced. In earlier kernels there should be no ill effect to using
the short-form flags.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: James Hogan <jhogan@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/19579/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Correct the 64-bit DSP accumulator register size

commit f5958b4cf4fc38ed4583ab83fb7c4cd1ab05f47b upstream.

Use the `unsigned long' rather than `__u32' type for DSP accumulator
registers, like with the regular MIPS multiply/divide accumulator and
general-purpose registers, as all are 64-bit in 64-bit implementations
and using a 32-bit data type leads to contents truncation on context
saving.

Update `arch_ptrace' and `compat_arch_ptrace' accordingly, removing
casts that are similarly not used with multiply/divide accumulator or
general-purpose register accesses.

Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: e50c0a8fa60d ("Support the MIPS32 / MIPS64 DSP ASE.")
Patchwork: https://patchwork.linux-mips.org/patch/19329/
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 2.6.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes: Make list and blacklist root user read only

commit f2a3ab36077222437b4826fc76111caa14562b7c upstream.

Since the blacklist and list files on debugfs indicates
a sensitive address information to reader, it should be
restricted to the root user.

Suggested-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Howells <dhowells@redhat.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jon Medhurst <tixy@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tobin C . Harding <me@tobin.cc>
Cc: Will Deacon <will.deacon@arm.com>
Cc: acme@kernel.org
Cc: akpm@linux-foundation.org
Cc: brueckner@linux.vnet.ibm.com
Cc: linux-arch@vger.kernel.org
Cc: rostedt@goodmis.org
Cc: schwidefsky@de.ibm.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/lkml/152491890171.9916.5183693615601334087.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes/arm: Fix %p uses in error messages

commit 75b2f5f5911fe7a2fc82969b2b24dde34e8f820d upstream.

Fix %p uses in error messages by removing it and
using general dumper.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Howells <dhowells@redhat.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jon Medhurst <tixy@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tobin C . Harding <me@tobin.cc>
Cc: Will Deacon <will.deacon@arm.com>
Cc: acme@kernel.org
Cc: akpm@linux-foundation.org
Cc: brueckner@linux.vnet.ibm.com
Cc: linux-arch@vger.kernel.org
Cc: rostedt@goodmis.org
Cc: schwidefsky@de.ibm.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/lkml/152491905361.9916.15300852365956231645.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/pci: fix out of bounds access during irq setup

commit 866f3576a72b2233a76dffb80290f8086dc49e17 upstream.

During interrupt setup we allocate interrupt vectors, walk the list of msi
descriptors, and fill in the message data. Requesting more interrupts than
supported on s390 can lead to an out of bounds access.

When we restrict the number of interrupts we should also stop walking the
msi list after all supported interrupts are handled.

Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/numa: move initial setup of node_to_cpumask_map

commit fb7d7518b0d65955f91c7b875c36eae7694c69bd upstream.

The numa_init_early initcall sets the node_to_cpumask_map[0] to the
full cpu_possible_mask. Unfortunately this early_initcall is too late,
the NUMA setup for numa=emu is done even earlier. The order of calls
is numa_setup() -> emu_update_cpu_topology(), then the early_initcalls(),
followed by sched_init_domains().

Starting with git commit 051f3ca02e46432c0965e8948f00c07d8a2f09c0
"sched/topology: Introduce NUMA identity node sched domain"
the incorrect node_to_cpumask_map[0] really screws up the domain
setup and the kernel panics with the follow oops:

Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qdio: reset old sbal_state flags

commit 64e03ff72623b8c2ea89ca3cb660094e019ed4ae upstream.

When allocating a new AOB fails, handle_outbound() is still capable of
transmitting the selected buffer (just without async completion).

But if a previous transfer on this queue slot used async completion, its
sbal_state flags field is still set to QDIO_OUTBUF_STATE_FLAG_PENDING.
So when the upper layer driver sees this stale flag, it expects an async
completion that never happens.

Fix this by unconditionally clearing the flags field.

Fixes: 104ea556ee7f ("qdio: support asynchronous delivery of storage blocks")
Cc: <stable@vger.kernel.org> #v3.2+
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: fix br_r1_trampoline for machines without exrl

commit 26f843848bae973817b3587780ce6b7b0200d3e4 upstream.

For machines without the exrl instruction the BFP jit generates
code that uses an "br %r1" instruction located in the lowcore page.
Unfortunately there is a cut & paste error that puts an additional
"larl %r1,.+14" instruction in the code that clobbers the branch
target address in %r1. Remove the larl instruction.

Cc: <stable@vger.kernel.org> # v4.17+
Fixes: de5cb6eb51 ("s390: use expoline thunks in the BPF JIT")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/mm: fix addressing exception after suspend/resume

commit 37a366face294facb9c9d9fdd9f5b64a27456cbd upstream.

Commit c9b5ad546e7d "s390/mm: tag normal pages vs pages used in page tables"
accidentally changed the logic in arch_set_page_states(), which is used by
the suspend/resume code. set_page_stable(page, order) was changed to
set_page_stable_dat(page, 0). After this, only the first page of higher order
pages will be set to stable, and a write to one of the unstable pages will
result in an addressing exception.

Fix this by using "order" again, instead of "0".

Fixes: c9b5ad546e7d ("s390/mm: tag normal pages vs pages used in page tables")
Cc: stable@vger.kernel.org # 4.14+
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Wipe KASAN stack shadow before rewind_stack_do_exit()

commit f12d11c5c184626b4befdee3d573ec8237405a33 upstream.

Reset the KASAN shadow state of the task stack before rewinding RSP.
Without this, a kernel oops will leave parts of the stack poisoned, and
code running under do_exit() can trip over such poisoned regions and cause
nonsensical false-positive KASAN reports about stack-out-of-bounds bugs.

This does not wipe the exception stacks; if an oops happens on an exception
stack, it might result in random KASAN false-positives from other tasks
afterwards. This is probably relatively uninteresting, since if the kernel
oopses on an exception stack, there are most likely bigger things to worry
about. It'd be more interesting if vmapped stacks and KASAN were
compatible, since then handle_stack_overflow() would oops from exception
stack context.

Fixes: 2deb4be28077 ("x86/dumpstack: When OOPSing, rewind the stack before do_exit()")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: kasan-dev@googlegroups.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180828184033.93712-1-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (nct6775) Fix potential Spectre v1

commit d49dbfade96d5b0863ca8a90122a805edd5ef50a upstream.

val can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

vers/hwmon/nct6775.c:2698 store_pwm_weight_temp_sel() warn: potential
spectre issue 'data->temp_src' [r]

Fix this by sanitizing val before using it to index data->temp_src

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/l1tf: Increase l1tf memory limit for Nehalem+

commit cc51e5428ea54f575d49cfcede1d4cb3a72b4ec4 upstream.

On Nehalem and newer core CPUs the CPU cache internally uses 44 bits
physical address space. The L1TF workaround is limited by this internal
cache address width, and needs to have one bit free there for the
mitigation to work.

Older client systems report only 36bit physical address space so the range
check decides that L1TF is not mitigated for a 36bit phys/32GB system with
some memory holes.

But since these actually have the larger internal cache width this warning
is bogus because it would only really be needed if the system had more than
43bits of memory.

Add a new internal x86_cache_bits field. Normally it is the same as the
physical bits field reported by CPUID, but for Nehalem and newerforce it to
be at least 44bits.

Change the L1TF memory size warning to use the new cache_bits field to
avoid bogus warnings and remove the bogus comment about memory size.

Fixes: 17dbca119312 ("x86/speculation/l1tf: Add sysfs reporting for l1tf")
Reported-by: George Anchev <studio@anchev.net>
Reported-by: Christopher Snowhill <kode54@gmail.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Michael Hocko <mhocko@suse.com>
Cc: vbabka@suse.cz
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180824170351.34874-1-andi@firstfloor.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/spectre: Add missing family 6 check to microcode check

commit 1ab534e85c93945f7862378d8c8adcf408205b19 upstream.

The check for Spectre microcodes does not check for family 6, only the
model numbers.

Add a family 6 check to avoid ambiguity with other families.

Fixes: a5b296636453 ("x86/cpufeature: Blacklist SPEC_CTRL/PRED_CMD on early Spectre v2 microcodes")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180824170351.34874-2-andi@firstfloor.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irqflags: Mark native_restore_fl extern inline

commit 1f59a4581b5ecfe9b4f049a7a2cf904d8352842d upstream.

This should have been marked extern inline in order to pick up the out
of line definition in arch/x86/kernel/irqflags.S.

Fixes: 208cbb325589 ("x86/irqflags: Provide a declaration for native_save_fl")
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180827214011.55428-1-ndesaulniers@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/nmi: Fix NMI uaccess race against CR3 switching

commit 4012e77a903d114f915fc607d6d2ed54a3d6c9b1 upstream.

A NMI can hit in the middle of context switching or in the middle of
switch_mm_irqs_off(). In either case, CR3 might not match current->mm,
which could cause copy_from_user_nmi() and friends to read the wrong
memory.

Fix it by adding a new nmi_uaccess_okay() helper and checking it in
copy_from_user_nmi() and in __copy_from_user_nmi()'s callers.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rik van Riel <riel@surriel.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/dd956eba16646fd0b15c3c0741269dfd84452dac.1535557289.git.luto@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/vdso: Fix lsl operand order

commit e78e5a91456fcecaa2efbb3706572fe043766f4d upstream.

In the __getcpu function, lsl is using the wrong target and destination
registers. Luckily, the compiler tends to choose %eax for both variables,
so it has been working so far.

Fixes: a582c540ac1b ("x86/vdso: Use RDPID in preference to LSL when available")
Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180901201452.27828-1-sneves@dei.uc.pt
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: freescale: off by one in imx1_pinconf_group_dbg_show()

commit 19da44cd33a3a6ff7c97fff0189999ff15b241e4 upstream.

The info->groups[] array is allocated in imx1_pinctrl_parse_dt(). It
has info->ngroups elements. Thus the > here should be >= to prevent
reading one element beyond the end of the array.

Cc: stable@vger.kernel.org
Fixes: 30612cd90005 ("pinctrl: imx1 core driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Uwe Kleine-König <u.kleine-könig@pengutronix.de>
Acked-by: Dong Aisheng <Aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: sirf: Fix potential NULL pointer dereference

commit ae1c696a480c67c45fb23b35162183f72c6be0e1 upstream.

There is a potential execution path in which function
platform_get_resource() returns NULL. If this happens,
we will end up having a NULL pointer dereference.

Fix this by replacing devm_ioremap with devm_ioremap_resource,
which has the NULL check and the memory region request.

This code was detected with the help of Coccinelle.

Cc: stable@vger.kernel.org
Fixes: 2bd8d1d5cf89 ("ASoC: sirf: Add audio usp interface driver")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: zte: Fix incorrect PCM format bit usages

commit c889a45d229938a94b50aadb819def8bb11a6a54 upstream.

zx-tdm driver sets the DAI driver definitions with the format bits
wrongly set with SNDRV_PCM_FORMAT_*, instead of SNDRV_PCM_FMTBIT_*.

This patch corrects the definitions.

Spotted by a sparse warning:
sound/soc/zte/zx-tdm.c:363:35: warning: restricted snd_pcm_format_t degrades to integer

Fixes: 870e0ddc4345 ("ASoC: zx-tdm: add zte's tdm controller driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: dpcm: don't merge format from invalid codec dai

commit 4febced15ac8ddb9cf3e603edb111842e4863d9a upstream.

When merging codec formats, dpcm_runtime_base_format() should skip
the codecs which are not supporting the current stream direction.

At the moment, if a BE link has more than one codec, and only one
of these codecs has no capture DAI, it becomes impossible to start
a capture stream because the merged format would be 0.

Skipping invalid codec DAI solves the problem.

Fixes: b073ed4e2126 ("ASoC: soc-pcm: DPCM cares BE format")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

b43/leds: Ensure NUL-termination of LED name string

commit 2aa650d1950fce94f696ebd7db30b8830c2c946f upstream.

strncpy might not NUL-terminate the string, if the name equals the buffer size.
Use strlcpy instead.

Signed-off-by: Michael Buesch <m@bues.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

b43legacy/leds: Ensure NUL-termination of LED name string

commit 4d77a89e3924b12f4a5628b21237e57ab4703866 upstream.

strncpy might not NUL-terminate the string, if the name equals the buffer size.
Use strlcpy instead.

Signed-off-by: Michael Buesch <m@bues.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udl-kms: avoid division

commit 91ba11fb7d7ca0a3bbe8a512e65e666e2ec1e889 upstream.

Division is slow, so it shouldn't be done by the pixel generating code.
The driver supports only 2 or 4 bytes per pixel, so we can replace
division with a shift.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udl-kms: fix crash due to uninitialized memory

commit 09a00abe3a9941c2715ca83eb88172cd2f54d8fd upstream.

We must use kzalloc when allocating the fb_deferred_io structure.
Otherwise, the field first_io is undefined and it causes a crash.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udl-kms: handle allocation failure

commit 542bb9788a1f485eb1a2229178f665d8ea166156 upstream.

Allocations larger than PAGE_ALLOC_COSTLY_ORDER are unreliable and they
may fail anytime. This patch fixes the udl kms driver so that when a large
alloactions fails, it tries to do multiple smaller allocations.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udl-kms: change down_interruptible to down

commit 8456b99c16d193c4c3b7df305cf431e027f0189c upstream.

If we leave urbs around, it causes not only leak, but also memory
corruption. This patch fixes the function udl_free_urb_list, so that it
always waits for all urbs that are in progress.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: Add missed unlock_page() to fuse_readpages_fill()

commit 109728ccc5933151c68d1106e4065478a487a323 upstream.

The above error path returns with page unlocked, so this place seems also
to behave the same.

Fixes: f8dbdf81821b ("fuse: rework fuse_readpages()")
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: Fix oops at process_init_reply()

commit e8f3bd773d22f488724dffb886a1618da85c2966 upstream.

syzbot is hitting NULL pointer dereference at process_init_reply().
This is because deactivate_locked_super() is called before response for
initial request is processed.

Fix this by aborting and waiting for all requests (including FUSE_INIT)
before resetting fc->sb.

Original patch by Tetsuo Handa <penguin-kernel@I-love.SKAURA.ne.jp>.

Reported-by: syzbot <syzbot+b62f08f4d5857755e3bc@syzkaller.appspotmail.com>
Fixes: e27c9d3877a0 ("fuse: fuse: add time_gran to INIT_OUT")
Cc: <stable@vger.kernel.org> # v3.19
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: umount should wait for all requests

commit b8f95e5d13f5f0191dcb4b9113113d241636e7cb upstream.

fuse_abort_conn() does not guarantee that all async requests have actually
finished aborting (i.e. their ->end() function is called).  This could
actually result in still used inodes after umount.

Add a helper to wait until all requests are fully done.  This is done by
looking at the "num_waiting" counter.  When this counter drops to zero, we
can be sure that no more requests are outstanding.

Fixes: 0d8e84b0432b ("fuse: simplify request abort")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix unlocked access to processing queue

commit 45ff350bbd9d0f0977ff270a0d427c71520c0c37 upstream.

fuse_dev_release() assumes that it's the only one referencing the
fpq->processing list, but that's not true, since fuse_abort_conn() can be
doing the same without any serialization between the two.

Fixes: c3696046beb3 ("fuse: separate pqueue for clones")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix double request_end()

commit 87114373ea507895a62afb10d2910bd9adac35a8 upstream.

Refcounting of request is broken when fuse_abort_conn() is called and
request is on the fpq->io list:

- ref is taken too late
- then it is not dropped

Fixes: 0d8e84b0432b ("fuse: simplify request abort")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix initial parallel dirops

commit 63576c13bd17848376c8ba4a98f5d5151140c4ac upstream.

If parallel dirops are enabled in FUSE_INIT reply, then first operation may
leave fi->mutex held.

Reported-by: syzbot <syzbot+3f7b29af1baa9d0a55be@syzkaller.appspotmail.com>
Fixes: 5c672ab3f0ee ("fuse: serialize dirops by default")
Cc: <stable@vger.kernel.org> # v4.7
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: Don't access pipe->buffers without pipe_lock()

commit a2477b0e67c52f4364a47c3ad70902bc2a61bd4c upstream.

fuse_dev_splice_write() reads pipe->buffers to determine the size of
'bufs' array before taking the pipe_lock(). This is not safe as
another thread might change the 'pipe->buffers' between the allocation
and taking the pipe_lock(). So we end up with too small 'bufs' array.

Move the bufs allocations inside pipe_lock()/pipe_unlock() to fix this.

Fixes: dd3bb14f44a6 ("fuse: support splice() writing to fuse device")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org> # v2.6.35
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kvm/vmx: Remove duplicate l1d flush definitions

commit 94d7a86c21a3d6046bf4616272313cb7d525075a upstream.

These are already defined higher up in the file.

Fixes: 7db92e165ac8 ("x86/kvm: Move l1tf setup function")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/d7ca03ae210d07173452aeed85ffe344301219a5.1534253536.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: SVM: Call x86_spec_ctrl_set_guest/host() with interrupts disabled

commit 024d83cadc6b2af027e473720f3c3da97496c318 upstream.

Mikhail reported the following lockdep splat:

WARNING: possible irq lock inversion dependency detected
CPU 0/KVM/10284 just changed the state of lock:
  000000000d538a88 (&st->lock){+...}, at:
  speculative_store_bypass_update+0x10b/0x170

but this lock was taken by another, HARDIRQ-safe lock
in the past:

(&(&sighand->siglock)->rlock){-.-.}

   and interrupts could create inverse lock ordering between them.

Possible interrupt unsafe locking scenario:

    CPU0                    CPU1
    ----                    ----
   lock(&st->lock);
                           local_irq_disable();
                           lock(&(&sighand->siglock)->rlock);
                           lock(&st->lock);
    <Interrupt>
     lock(&(&sighand->siglock)->rlock);
     *** DEADLOCK ***

The code path which connects those locks is:

   speculative_store_bypass_update()
   ssb_prctl_set()
   do_seccomp()
   do_syscall_64()

In svm_vcpu_run() speculative_store_bypass_update() is called with
interupts enabled via x86_virt_spec_ctrl_set_guest/host().

This is actually a false positive, because GIF=0 so interrupts are
disabled even if IF=1; however, we can easily move the invocations of
x86_virt_spec_ctrl_set_guest/host() into the interrupt disabled region to
cure it, and it's a good idea to keep the GIF=0/IF=1 area as small
and self-contained as possible.

Fixes: 1f50ddb4f418 ("x86/speculation: Handle HT correctly on AMD")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: kvm@vger.kernel.org
Cc: x86@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/process: Re-export start_thread()

commit dc76803e57cc86589c4efcb5362918f9b0c0436f upstream.

The consolidation of the start_thread() functions removed the export
unintentionally. This breaks binfmt handlers built as a module.

Add it back.

Fixes: e634d8fc792c ("x86-64: merge the standard and compat start_thread() functions")
Signed-off-by: Rian Hunter <rian@alum.mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Dmitry Safonov <dima@arista.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180819230854.7275-1-rian@alum.mit.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/vdso: Fix vDSO build if a retpoline is emitted

commit 2e549b2ee0e358bc758480e716b881f9cabedb6a upstream.

Currently, if the vDSO ends up containing an indirect branch or
call, GCC will emit the "external thunk" style of retpoline, and it
will fail to link.

Fix it by building the vDSO with inline retpoline thunks.

I haven't seen any reports of this triggering on an unpatched
kernel.

Fixes: commit 76b043848fd2 ("x86/retpoline: Add initial retpoline support")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Matt Rickard <matt@softrans.com.au>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jason Vas Dias <jason.vas.dias@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/c76538cd3afbe19c6246c2d1715bc6a60bd63985.1534448381.git.luto@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/l1tf: Suggest what to do on systems with too much RAM

commit 6a012288d6906fee1dbc244050ade1dafe4a9c8d upstream.

Two users have reported [1] that they have an "extremely unlikely" system
with more than MAX_PA/2 memory and L1TF mitigation is not effective.

Make the warning more helpful by suggesting the proper mem=X kernel boot
parameter to make it effective and a link to the L1TF document to help
decide if the mitigation is worth the unusable RAM.

[1] https://bugzilla.suse.com/show_bug.cgi?id=1105536

Suggested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/966571f0-9d7f-43dc-92c6-a10eec7a1254@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/l1tf: Fix off-by-one error when warning that system has too much RAM

commit b0a182f875689647b014bc01d36b340217792852 upstream.

Two users have reported [1] that they have an "extremely unlikely" system
with more than MAX_PA/2 memory and L1TF mitigation is not effective. In
fact it's a CPU with 36bits phys limit (64GB) and 32GB memory, but due to
holes in the e820 map, the main region is almost 500MB over the 32GB limit:

[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081effffff] usable

Suggestions to use 'mem=32G' to enable the L1TF mitigation while losing the
500MB revealed, that there's an off-by-one error in the check in
l1tf_select_mitigation().

l1tf_pfn_limit() returns the last usable pfn (inclusive) and the range
check in the mitigation path does not take this into account.

Instead of amending the range check, make l1tf_pfn_limit() return the first
PFN which is over the limit which is less error prone. Adjust the other
users accordingly.

[1] https://bugzilla.suse.com/show_bug.cgi?id=1105536

Fixes: 17dbca119312 ("x86/speculation/l1tf: Add sysfs reporting for l1tf")
Reported-by: George Anchev <studio@anchev.net>
Reported-by: Christopher Snowhill <kode54@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180823134418.17008-1-vbabka@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/l1tf: Fix overflow in l1tf_pfn_limit() on 32bit

commit 9df9516940a61d29aedf4d91b483ca6597e7d480 upstream.

On 32bit PAE kernels on 64bit hardware with enough physical bits,
l1tf_pfn_limit() will overflow unsigned long. This in turn affects
max_swapfile_size() and can lead to swapon returning -EINVAL. This has been
observed in a 32bit guest with 42 bits physical address size, where
max_swapfile_size() overflows exactly to 1 << 32, thus zero, and produces
the following warning to dmesg:

[ 6.396845] Truncating oversized swap area, only using 0k out of 2047996k

Fix this by using unsigned long long instead.

Fixes: 17dbca119312 ("x86/speculation/l1tf: Add sysfs reporting for l1tf")
Fixes: 377eeaa8e11f ("x86/speculation/l1tf: Limit swap file size to MAX_PA/2")
Reported-by: Dominique Leuenberger <dimstar@suse.de>
Reported-by: Adrian Schroeter <adrian@suse.de>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180820095835.5298-1-vbabka@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>