Ville Syrjälä [Thu, 10 Oct 2019 13:11:57 +0000 (16:11 +0300)]
drm/amd/display: Use swap() where appropriate
[ Upstream commit
34b86b75dfc90ab3d996c224314ce51772a3b351 ]
Mostly a cocci-job, but it flat out refused to remove the
declaration in drivers/gpu/drm/amd/display/dc/core/dc.c so
had to do that part manually.
@swap@
identifier TEMP;
expression A,B;
@@
- TEMP = A;
- A = B;
- B = TEMP;
+ swap(A, B);
@@
type T;
identifier swap.TEMP;
@@
(
- T TEMP;
|
- T TEMP = {...};
)
... when != TEMP
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lyude Paul [Fri, 3 Apr 2020 19:47:15 +0000 (15:47 -0400)]
drm/dp_mst: Increase ACT retry timeout to 3s
[ Upstream commit
873a95e0d59ac06901ae261dda0b7165ffd002b8 ]
Currently we only poll for an ACT up to 30 times, with a busy-wait delay
of 100µs between each attempt - giving us a timeout of 2900µs. While
this might seem sensible, it would appear that in certain scenarios it
can take dramatically longer then that for us to receive an ACT. On one
of the EVGA MST hubs that I have available, I observed said hub
sometimes taking longer then a second before signalling the ACT. These
delays mostly seem to occur when previous sideband messages we've sent
are NAKd by the hub, however it wouldn't be particularly surprising if
it's possible to reproduce times like this simply by introducing branch
devices with large LCTs since payload allocations have to take effect on
every downstream device up to the payload's target.
So, instead of just retrying 30 times we poll for the ACT for up to 3ms,
and additionally use usleep_range() to avoid a very long and rude
busy-wait. Note that the previous retry count of 30 appears to have been
arbitrarily chosen, as I can't find any mention of a recommended timeout
or retry count for ACTs in the DisplayPort 2.0 specification. This also
goes for the range we were previously using for udelay(), although I
suspect that was just copied from the recommended delay for link
training on SST devices.
Changes since v1:
* Use readx_poll_timeout() instead of open-coding timeout loop - Sean
Paul
Changes since v2:
* Increase poll interval to 200us - Sean Paul
* Print status in hex when we timeout waiting for ACT - Sean Paul
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes:
ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Sean Paul <sean@poorly.run>
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-4-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Theodore Ts'o [Wed, 10 Jun 2020 15:16:37 +0000 (11:16 -0400)]
ext4: avoid race conditions when remounting with options that change dax
[ Upstream commit
829b37b8cddb1db75c1b7905505b90e593b15db1 ]
Trying to change dax mount options when remounting could allow mount
options to be enabled for a small amount of time, and then the mount
option change would be reverted.
In the case of "mount -o remount,dax", this can cause a race where
files would temporarily treated as DAX --- and then not.
Cc: stable@kernel.org
Reported-by: syzbot+bca9799bf129256190da@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
zhangyi (F) [Wed, 4 Dec 2019 12:46:14 +0000 (20:46 +0800)]
jbd2: clean __jbd2_journal_abort_hard() and __journal_abort_soft()
[ Upstream commit
7f6225e446cc8dfa4c3c7959a4de3dd03ec277bf ]
__jbd2_journal_abort_hard() is no longer used, so now we can merge
__jbd2_journal_abort_hard() and __journal_abort_soft() these two
functions into jbd2_journal_abort() and remove them.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-5-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tom Rix [Wed, 10 Jun 2020 21:57:13 +0000 (14:57 -0700)]
selinux: fix double free
commit
65de50969a77509452ae590e9449b70a22b923bb upstream.
Clang's static analysis tool reports these double free memory errors.
security/selinux/ss/services.c:2987:4: warning: Attempt to free released memory [unix.Malloc]
kfree(bnames[i]);
^~~~~~~~~~~~~~~~
security/selinux/ss/services.c:2990:2: warning: Attempt to free released memory [unix.Malloc]
kfree(bvalues);
^~~~~~~~~~~~~~
So improve the security_get_bools error handling by freeing these variables
and setting their return pointers to NULL and the return len to 0
Cc: stable@vger.kernel.org
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sandeep Raghuraman [Wed, 10 Jun 2020 20:06:26 +0000 (01:36 +0530)]
drm/amdgpu: Replace invalid device ID with a valid device ID
commit
790243d3bf78f9830a3b2ffbca1ed0f528295d48 upstream.
Initializes Powertune data for a specific Hawaii card by fixing what
looks like a typo in the code. The device ID 66B1 is not a supported
device ID for this driver, and is not mentioned elsewhere. 67B1 is a
valid device ID, and is a Hawaii Pro GPU.
I have tested on my R9 390 which has device ID 67B1, and it works
fine without problems.
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huacai Chen [Tue, 31 Mar 2020 06:18:08 +0000 (14:18 +0800)]
drm/qxl: Use correct notify port address when creating cursor ring
commit
80e5f89da3ab949fbbf1cae01dfaea29f5483a75 upstream.
The command ring and cursor ring use different notify port addresses
definition: QXL_IO_NOTIFY_CMD and QXL_IO_NOTIFY_CURSOR. However, in
qxl_device_init() we use QXL_IO_NOTIFY_CMD to create both command ring
and cursor ring. This doesn't cause any problems now, because QEMU's
behaviors on QXL_IO_NOTIFY_CMD and QXL_IO_NOTIFY_CURSOR are the same.
However, QEMU's behavior may be change in future, so let's fix it.
P.S.: In the X.org QXL driver, the notify port address of cursor ring
is correct.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: <stable@vger.kernel.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1585635488-17507-1-git-send-email-chenhc@lemote.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lyude Paul [Fri, 3 Apr 2020 18:08:32 +0000 (14:08 -0400)]
drm/dp_mst: Reformat drm_dp_check_act_status() a bit
commit
a5cb5fa6c3a5c2cf492db667b8670ee7b044b79f upstream.
Just add a bit more line wrapping, get rid of some extraneous
whitespace, remove an unneeded goto label, and move around some variable
declarations. No functional changes here.
Signed-off-by: Lyude Paul <lyude@redhat.com>
[this isn't a fix, but it's needed for the fix that comes after this]
Fixes:
ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Sean Paul <sean@poorly.run>
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-3-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Mon, 1 Jun 2020 20:05:43 +0000 (13:05 -0700)]
ext4: avoid utf8_strncasecmp() with unstable name
commit
2ce3ee931a097e9720310db3f09c01c825a4580c upstream.
If the dentry name passed to ->d_compare() fits in dentry::d_iname, then
it may be concurrently modified by a rename. This can cause undefined
behavior (possibly out-of-bounds memory accesses or crashes) in
utf8_strncasecmp(), since fs/unicode/ isn't written to handle strings
that may be concurrently modified.
Fix this by first copying the filename to a stack buffer if needed.
This way we get a stable snapshot of the filename.
Fixes:
b886ee3e778e ("ext4: Support case-insensitive file name lookups")
Cc: <stable@vger.kernel.org> # v5.2+
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Daniel Rosenberg <drosen@google.com>
Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20200601200543.59417-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeffle Xu [Fri, 22 May 2020 04:18:44 +0000 (12:18 +0800)]
ext4: fix partial cluster initialization when splitting extent
commit
cfb3c85a600c6aa25a2581b3c1c4db3460f14e46 upstream.
Fix the bug when calculating the physical block number of the first
block in the split extent.
This bug will cause xfstests shared/298 failure on ext4 with bigalloc
enabled occasionally. Ext4 error messages indicate that previously freed
blocks are being freed again, and the following fsck will fail due to
the inconsistency of block bitmap and bg descriptor.
The following is an example case:
1. First, Initialize a ext4 filesystem with cluster size '16K', block size
'4K', in which case, one cluster contains four blocks.
2. Create one file (e.g., xxx.img) on this ext4 filesystem. Now the extent
tree of this file is like:
...
36864:[0]4:220160
36868:[0]14332:145408
51200:[0]2:231424
...
3. Then execute PUNCH_HOLE fallocate on this file. The hole range is
like:
..
ext4_ext_remove_space: dev 254,16 ino 12 since 49506 end 49506 depth 1
ext4_ext_remove_space: dev 254,16 ino 12 since 49544 end 49546 depth 1
ext4_ext_remove_space: dev 254,16 ino 12 since 49605 end 49607 depth 1
...
4. Then the extent tree of this file after punching is like
...
49507:[0]37:158047
49547:[0]58:158087
...
5. Detailed procedure of punching hole [49544, 49546]
5.1. The block address space:
```
lblk ~49505 49506 49507~49543 49544~49546 49547~
---------+------+-------------+----------------+--------
extent | hole | extent | hole | extent
---------+------+-------------+----------------+--------
pblk ~158045 158046 158047~158083 158084~158086 158087~
```
5.2. The detailed layout of cluster 39521:
```
cluster 39521
<------------------------------->
hole extent
<----------------------><--------
lblk 49544 49545 49546 49547
+-------+-------+-------+-------+
| | | | |
+-------+-------+-------+-------+
pblk 158084 1580845 158086 158087
```
5.3. The ftrace output when punching hole [49544, 49546]:
- ext4_ext_remove_space (start 49544, end 49546)
- ext4_ext_rm_leaf (start 49544, end 49546, last_extent [49507(158047), 40], partial [pclu 39522 lblk 0 state 2])
- ext4_remove_blocks (extent [49507(158047), 40], from 49544 to 49546, partial [pclu 39522 lblk 0 state 2]
- ext4_free_blocks: (block 158084 count 4)
- ext4_mballoc_free (extent 1/6753/1)
5.4. Ext4 error message in dmesg:
EXT4-fs error (device vdb): mb_free_blocks:1457: group 1, block 158084:freeing already freed block (bit 6753); block bitmap corrupt.
EXT4-fs error (device vdb): ext4_mb_generate_buddy:747: group 1, block bitmap and bg descriptor inconsistent: 19550 vs 19551 free clusters
In this case, the whole cluster 39521 is freed mistakenly when freeing
pblock 158084~158086 (i.e., the first three blocks of this cluster),
although pblock 158087 (the last remaining block of this cluster) has
not been freed yet.
The root cause of this isuue is that, the pclu of the partial cluster is
calculated mistakenly in ext4_ext_remove_space(). The correct
partial_cluster.pclu (i.e., the cluster number of the first block in the
next extent, that is, lblock 49597 (pblock 158086)) should be 39521 rather
than 39522.
Fixes:
f4226d9ea400 ("ext4: fix partial cluster initialization")
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Eric Whitney <enwlinux@gmail.com>
Cc: stable@kernel.org # v3.19+
Link: https://lore.kernel.org/r/1590121124-37096-1-git-send-email-jefflexu@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wolfram Sang [Mon, 15 Jun 2020 07:58:10 +0000 (09:58 +0200)]
drm: encoder_slave: fix refcouting error for modules
[ Upstream commit
f78d4032de60f50fd4afaa0fb68ea03b985f820a ]
module_put() balances try_module_get(), not request_module(). Fix the
error path to match that.
Fixes:
2066facca4c7 ("drm/kms: slave encoder interface.")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kai-Heng Feng [Wed, 3 Jun 2020 07:48:19 +0000 (15:48 +0800)]
libata: Use per port sync for detach
[ Upstream commit
b5292111de9bb70cba3489075970889765302136 ]
Commit
130f4caf145c ("libata: Ensure ata_port probe has completed before
detach") may cause system freeze during suspend.
Using async_synchronize_full() in PM callbacks is wrong, since async
callbacks that are already scheduled may wait for not-yet-scheduled
callbacks, causes a circular dependency.
Instead of using big hammer like async_synchronize_full(), use async
cookie to make sure port probe are synced, without affecting other
scheduled PM callbacks.
Fixes:
130f4caf145c ("libata: Ensure ata_port probe has completed before detach")
Suggested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: John Garry <john.garry@huawei.com>
BugLink: https://bugs.launchpad.net/bugs/1867983
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Will Deacon [Fri, 29 May 2020 13:12:18 +0000 (14:12 +0100)]
arm64: hw_breakpoint: Don't invoke overflow handler on uaccess watchpoints
[ Upstream commit
24ebec25fb270100e252b19c288e21bd7d8cc7f7 ]
Unprivileged memory accesses generated by the so-called "translated"
instructions (e.g. STTR) at EL1 can cause EL0 watchpoints to fire
unexpectedly if kernel debugging is enabled. In such cases, the
hw_breakpoint logic will invoke the user overflow handler which will
typically raise a SIGTRAP back to the current task. This is futile when
returning back to the kernel because (a) the signal won't have been
delivered and (b) userspace can't handle the thing anyway.
Avoid invoking the user overflow handler for watchpoints triggered by
kernel uaccess routines, and instead single-step over the faulting
instruction as we would if no overflow handler had been installed.
(Fixes tag identifies the introduction of unprivileged memory accesses,
which exposed this latent bug in the hw_breakpoint code)
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Fixes:
57f4959bad0a ("arm64: kernel: Add support for User Access Override")
Reported-by: Luis Machado <luis.machado@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Auhagen [Tue, 16 Jun 2020 04:35:29 +0000 (06:35 +0200)]
mvpp2: remove module bugfix
[ Upstream commit
807eaf99688ce162a98a7501477644782d4af098 ]
The remove function does not destroy all
BM Pools when per cpu pool is active.
When reloading the mvpp2 as a module the BM Pools
are still active in hardware and due to the bug
have twice the size now old + new.
This eventually leads to a kernel crash.
v2:
* add Fixes tag
Fixes:
7d04b0b13b11 ("mvpp2: percpu buffers")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jason Yan [Tue, 16 Jun 2020 12:16:55 +0000 (20:16 +0800)]
block: Fix use-after-free in blkdev_get()
[ Upstream commit
2d3a8e2deddea6c89961c422ec0c5b851e648c14 ]
In blkdev_get() we call __blkdev_get() to do some internal jobs and if
there is some errors in __blkdev_get(), the bdput() is called which
means we have released the refcount of the bdev (actually the refcount of
the bdev inode). This means we cannot access bdev after that point. But
acctually bdev is still accessed in blkdev_get() after calling
__blkdev_get(). This results in use-after-free if the refcount is the
last one we released in __blkdev_get(). Let's take a look at the
following scenerio:
CPU0 CPU1 CPU2
blkdev_open blkdev_open Remove disk
bd_acquire
blkdev_get
__blkdev_get del_gendisk
bdev_unhash_inode
bd_acquire bdev_get_gendisk
bd_forget failed because of unhashed
bdput
bdput (the last one)
bdev_evict_inode
access bdev => use after free
[ 459.350216] BUG: KASAN: use-after-free in __lock_acquire+0x24c1/0x31b0
[ 459.351190] Read of size 8 at addr
ffff88806c815a80 by task syz-executor.0/20132
[ 459.352347]
[ 459.352594] CPU: 0 PID: 20132 Comm: syz-executor.0 Not tainted 4.19.90 #2
[ 459.353628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 459.354947] Call Trace:
[ 459.355337] dump_stack+0x111/0x19e
[ 459.355879] ? __lock_acquire+0x24c1/0x31b0
[ 459.356523] print_address_description+0x60/0x223
[ 459.357248] ? __lock_acquire+0x24c1/0x31b0
[ 459.357887] kasan_report.cold+0xae/0x2d8
[ 459.358503] __lock_acquire+0x24c1/0x31b0
[ 459.359120] ? _raw_spin_unlock_irq+0x24/0x40
[ 459.359784] ? lockdep_hardirqs_on+0x37b/0x580
[ 459.360465] ? _raw_spin_unlock_irq+0x24/0x40
[ 459.361123] ? finish_task_switch+0x125/0x600
[ 459.361812] ? finish_task_switch+0xee/0x600
[ 459.362471] ? mark_held_locks+0xf0/0xf0
[ 459.363108] ? __schedule+0x96f/0x21d0
[ 459.363716] lock_acquire+0x111/0x320
[ 459.364285] ? blkdev_get+0xce/0xbe0
[ 459.364846] ? blkdev_get+0xce/0xbe0
[ 459.365390] __mutex_lock+0xf9/0x12a0
[ 459.365948] ? blkdev_get+0xce/0xbe0
[ 459.366493] ? bdev_evict_inode+0x1f0/0x1f0
[ 459.367130] ? blkdev_get+0xce/0xbe0
[ 459.367678] ? destroy_inode+0xbc/0x110
[ 459.368261] ? mutex_trylock+0x1a0/0x1a0
[ 459.368867] ? __blkdev_get+0x3e6/0x1280
[ 459.369463] ? bdev_disk_changed+0x1d0/0x1d0
[ 459.370114] ? blkdev_get+0xce/0xbe0
[ 459.370656] blkdev_get+0xce/0xbe0
[ 459.371178] ? find_held_lock+0x2c/0x110
[ 459.371774] ? __blkdev_get+0x1280/0x1280
[ 459.372383] ? lock_downgrade+0x680/0x680
[ 459.373002] ? lock_acquire+0x111/0x320
[ 459.373587] ? bd_acquire+0x21/0x2c0
[ 459.374134] ? do_raw_spin_unlock+0x4f/0x250
[ 459.374780] blkdev_open+0x202/0x290
[ 459.375325] do_dentry_open+0x49e/0x1050
[ 459.375924] ? blkdev_get_by_dev+0x70/0x70
[ 459.376543] ? __x64_sys_fchdir+0x1f0/0x1f0
[ 459.377192] ? inode_permission+0xbe/0x3a0
[ 459.377818] path_openat+0x148c/0x3f50
[ 459.378392] ? kmem_cache_alloc+0xd5/0x280
[ 459.379016] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 459.379802] ? path_lookupat.isra.0+0x900/0x900
[ 459.380489] ? __lock_is_held+0xad/0x140
[ 459.381093] do_filp_open+0x1a1/0x280
[ 459.381654] ? may_open_dev+0xf0/0xf0
[ 459.382214] ? find_held_lock+0x2c/0x110
[ 459.382816] ? lock_downgrade+0x680/0x680
[ 459.383425] ? __lock_is_held+0xad/0x140
[ 459.384024] ? do_raw_spin_unlock+0x4f/0x250
[ 459.384668] ? _raw_spin_unlock+0x1f/0x30
[ 459.385280] ? __alloc_fd+0x448/0x560
[ 459.385841] do_sys_open+0x3c3/0x500
[ 459.386386] ? filp_open+0x70/0x70
[ 459.386911] ? trace_hardirqs_on_thunk+0x1a/0x1c
[ 459.387610] ? trace_hardirqs_off_caller+0x55/0x1c0
[ 459.388342] ? do_syscall_64+0x1a/0x520
[ 459.388930] do_syscall_64+0xc3/0x520
[ 459.389490] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 459.390248] RIP: 0033:0x416211
[ 459.390720] Code: 75 14 b8 02 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83
04 19 00 00 c3 48 83 ec 08 e8 0a fa ff ff 48 89 04 24 b8 02 00 00 00 0f
05 <48> 8b 3c 24 48 89 c2 e8 53 fa ff ff 48 89 d0 48 83 c4 08 48 3d
01
[ 459.393483] RSP: 002b:
00007fe45dfe9a60 EFLAGS:
00000293 ORIG_RAX:
0000000000000002
[ 459.394610] RAX:
ffffffffffffffda RBX:
00007fe45dfea6d4 RCX:
0000000000416211
[ 459.395678] RDX:
00007fe45dfe9b0a RSI:
0000000000000002 RDI:
00007fe45dfe9b00
[ 459.396758] RBP:
000000000076bf20 R08:
0000000000000000 R09:
000000000000000a
[ 459.397930] R10:
0000000000000075 R11:
0000000000000293 R12:
00000000ffffffff
[ 459.399022] R13:
0000000000000bd9 R14:
00000000004cdb80 R15:
000000000076bf2c
[ 459.400168]
[ 459.400430] Allocated by task 20132:
[ 459.401038] kasan_kmalloc+0xbf/0xe0
[ 459.401652] kmem_cache_alloc+0xd5/0x280
[ 459.402330] bdev_alloc_inode+0x18/0x40
[ 459.402970] alloc_inode+0x5f/0x180
[ 459.403510] iget5_locked+0x57/0xd0
[ 459.404095] bdget+0x94/0x4e0
[ 459.404607] bd_acquire+0xfa/0x2c0
[ 459.405113] blkdev_open+0x110/0x290
[ 459.405702] do_dentry_open+0x49e/0x1050
[ 459.406340] path_openat+0x148c/0x3f50
[ 459.406926] do_filp_open+0x1a1/0x280
[ 459.407471] do_sys_open+0x3c3/0x500
[ 459.408010] do_syscall_64+0xc3/0x520
[ 459.408572] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 459.409415]
[ 459.409679] Freed by task 1262:
[ 459.410212] __kasan_slab_free+0x129/0x170
[ 459.410919] kmem_cache_free+0xb2/0x2a0
[ 459.411564] rcu_process_callbacks+0xbb2/0x2320
[ 459.412318] __do_softirq+0x225/0x8ac
Fix this by delaying bdput() to the end of blkdev_get() which means we
have finished accessing bdev.
Fixes:
77ea887e433a ("implement in-kernel gendisk events handling")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dinghao Liu [Fri, 22 May 2020 04:59:29 +0000 (12:59 +0800)]
scsi: ufs-bsg: Fix runtime PM imbalance on error
[ Upstream commit
a1e17eb03e69bb61bd1b1a14610436b7b9be12d9 ]
When ufs_bsg_alloc_desc_buffer() returns an error code, a pairing runtime
PM usage counter decrement is needed to keep the counter balanced.
Link: https://lore.kernel.org/r/20200522045932.31795-1-dinghao.liu@zju.edu.cn
Fixes:
74e5e468b664 (scsi: ufs-bsg: Wake the device before sending raw upiu commands)
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vasundhara Volam [Sun, 14 Jun 2020 23:57:10 +0000 (19:57 -0400)]
bnxt_en: Return from timer if interface is not in open state.
[ Upstream commit
e000940473d1423a42ef9c823fb23ccffe3f07ea ]
This will avoid many uneccessary error logs when driver or firmware is
in reset.
Fixes:
230d1f0de754 ("bnxt_en: Handle firmware reset.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Sun, 14 Jun 2020 21:12:05 +0000 (22:12 +0100)]
afs: Fix the mapping of the UAEOVERFLOW abort code
[ Upstream commit
4ec89596d06bd481ba827f3b409b938d63914157 ]
Abort code UAEOVERFLOW is returned when we try and set a time that's out of
range, but it's currently mapped to EREMOTEIO by the default case.
Fix UAEOVERFLOW to map instead to EOVERFLOW.
Found with the generic/258 xfstest. Note that the test is wrong as it
assumes that the filesystem will support a pre-UNIX-epoch date.
Fixes:
1eda8bab70ca ("afs: Add support for the UAE error table")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Wed, 8 Apr 2020 15:13:20 +0000 (16:13 +0100)]
afs: Set error flag rather than return error from file status decode
[ Upstream commit
38355eec6a7d2b8f2f313f9174736dc877744e59 ]
Set a flag in the call struct to indicate an unmarshalling error rather
than return and handle an error from the decoding of file statuses. This
flag is checked on a successful return from the delivery function.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Thu, 16 Apr 2020 13:20:32 +0000 (14:20 +0100)]
afs: Always include dir in bulk status fetch from afs_do_lookup()
[ Upstream commit
13fcc6356a94558a0a4857dc00cd26b3834a1b3e ]
When a lookup is done in an AFS directory, the filesystem will speculate
and fetch up to 49 other statuses for files in the same directory and fetch
those as well, turning them into inodes or updating inodes that already
exist.
However, occasionally, a callback break might go missing due to NAT timing
out, but the afs filesystem doesn't then realise that the directory is not
up to date.
Alleviate this by using one of the status slots to check the directory in
which the lookup is being done.
Reported-by: Dave Botsch <botsch@cnf.cornell.edu>
Suggested-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Fri, 12 Jun 2020 23:03:48 +0000 (00:03 +0100)]
afs: Fix EOF corruption
[ Upstream commit
3f4aa981816368fe6b1d13c2bfbe76df9687e787 ]
When doing a partial writeback, afs_write_back_from_locked_page() may
generate an FS.StoreData RPC request that writes out part of a file when a
file has been constructed from pieces by doing seek, write, seek, write,
... as is done by ld.
The FS.StoreData RPC is given the current i_size as the file length, but
the server basically ignores it unless the data length is 0 (in which case
it's just a truncate operation). The revised file length returned in the
result of the RPC may then not reflect what we suggested - and this leads
to i_size getting moved backwards - which causes issues later.
Fix the client to take account of this by ignoring the returned file size
unless the data version number jumped unexpectedly - in which case we're
going to have to clear the pagecache and reload anyway.
This can be observed when doing a kernel build on an AFS mount. The
following pair of commands produce the issue:
ld -m elf_x86_64 -z max-page-size=0x200000 --emit-relocs \
-T arch/x86/realmode/rm/realmode.lds \
arch/x86/realmode/rm/header.o \
arch/x86/realmode/rm/trampoline_64.o \
arch/x86/realmode/rm/stack.o \
arch/x86/realmode/rm/reboot.o \
-o arch/x86/realmode/rm/realmode.elf
arch/x86/tools/relocs --realmode \
arch/x86/realmode/rm/realmode.elf \
>arch/x86/realmode/rm/realmode.relocs
This results in the latter giving:
Cannot read ELF section headers 0/18: Success
as the realmode.elf file got corrupted.
The sequence of events can also be driven with:
xfs_io -t -f \
-c "pwrite -S 0x58 0 0x58" \
-c "pwrite -S 0x59 10000 1000" \
-c "close" \
/afs/example.com/scratch/a
Fixes:
31143d5d515e ("AFS: implement basic file write support")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Fri, 12 Jun 2020 22:58:51 +0000 (23:58 +0100)]
afs: afs_write_end() should change i_size under the right lock
[ Upstream commit
1f32ef79897052ef7d3d154610d8d6af95abde83 ]
Fix afs_write_end() to change i_size under vnode->cb_lock rather than
->wb_lock so that it doesn't race with afs_vnode_commit_status() and
afs_getattr().
The ->wb_lock is only meant to guard access to ->wb_keys which isn't
accessed by that piece of code.
Fixes:
4343d00872e1 ("afs: Get rid of the afs_writeback record")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Thu, 11 Jun 2020 23:15:13 +0000 (00:15 +0100)]
afs: Fix non-setting of mtime when writing into mmap
[ Upstream commit
bb413489288e4e457353bac513fddb6330d245ca ]
The mtime on an inode needs to be updated when a write is made into an
mmap'ed section. There are three ways in which this could be done: update
it when page_mkwrite is called, update it when a page is changed from dirty
to writeback or leave it to the server and fix the mtime up from the reply
to the StoreData RPC.
Found with the generic/215 xfstest.
Fixes:
1cf7a1518aef ("afs: Implement shared-writeable mmap")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aneesh Kumar K.V [Sun, 24 May 2020 09:38:19 +0000 (15:08 +0530)]
powerpc: Fix kernel crash in show_instructions() w/DEBUG_VIRTUAL
[ Upstream commit
a6e2c226c3d51fd93636320e47cabc8a8f0824c5 ]
With CONFIG_DEBUG_VIRTUAL=y, we can hit a BUG() if we take a hard
lockup watchdog interrupt when in OPAL mode.
This happens in show_instructions() if the kernel takes the watchdog
NMI IPI, or any other interrupt, with MSR_IR == 0. show_instructions()
updates the variable pc in the loop and the second iteration will
result in BUG().
We hit the BUG_ON due the below check in __va()
#define __va(x)
({
VIRTUAL_BUG_ON((unsigned long)(x) >= PAGE_OFFSET);
(void *)(unsigned long)((phys_addr_t)(x) | PAGE_OFFSET);
})
Fix it by moving the check out of the loop. Also update nip so that
the nip == pc check still matches.
Fixes:
4dd7554a6456 ("powerpc/64: Add VIRTUAL_BUG_ON checks for __va and __pa addresses")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Use IS_ENABLED(), massage change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200524093822.423487-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhiqiang Liu [Sun, 14 Jun 2020 16:53:30 +0000 (00:53 +0800)]
bcache: fix potential deadlock problem in btree_gc_coalesce
[ Upstream commit
be23e837333a914df3f24bf0b32e87b0331ab8d1 ]
coccicheck reports:
drivers/md//bcache/btree.c:1538:1-7: preceding lock on line 1417
In btree_gc_coalesce func, if the coalescing process fails, we will goto
to out_nocoalesce tag directly without releasing new_nodes[i]->write_lock.
Then, it will cause a deadlock when trying to acquire new_nodes[i]->
write_lock for freeing new_nodes[i] before return.
btree_gc_coalesce func details as follows:
if alloc new_nodes[i] fails:
goto out_nocoalesce;
// obtain new_nodes[i]->write_lock
mutex_lock(&new_nodes[i]->write_lock)
// main coalescing process
for (i = nodes - 1; i > 0; --i)
[snipped]
if coalescing process fails:
// Here, directly goto out_nocoalesce
// tag will cause a deadlock
goto out_nocoalesce;
[snipped]
// release new_nodes[i]->write_lock
mutex_unlock(&new_nodes[i]->write_lock)
// coalesing succ, return
return;
out_nocoalesce:
btree_node_free(new_nodes[i]) // free new_nodes[i]
// obtain new_nodes[i]->write_lock
mutex_lock(&new_nodes[i]->write_lock);
// set flag for reuse
clear_bit(BTREE_NODE_dirty, &ew_nodes[i]->flags);
// release new_nodes[i]->write_lock
mutex_unlock(&new_nodes[i]->write_lock);
To fix the problem, we add a new tag 'out_unlock_nocoalesce' for
releasing new_nodes[i]->write_lock before out_nocoalesce tag. If
coalescing process fails, we will go to out_unlock_nocoalesce tag
for releasing new_nodes[i]->write_lock before free new_nodes[i] in
out_nocoalesce tag.
(Coly Li helps to clean up commit log format.)
Fixes:
2a285686c109816 ("bcache: btree locking rework")
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
yangerkun [Mon, 1 Jun 2020 07:34:04 +0000 (15:34 +0800)]
ext4: stop overwrite the errcode in ext4_setup_super
[ Upstream commit
5adaccac46ea79008d7b75f47913f1a00f91d0ce ]
Now the errcode from ext4_commit_super will overwrite EROFS exists in
ext4_setup_super. Actually, no need to call ext4_commit_super since we
will return EROFS. Fix it by goto done directly.
Fixes:
c89128a00838 ("ext4: handle errors on ext4_commit_super")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200601073404.3712492-1-yangerkun@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hongbo Yao [Fri, 5 Jun 2020 09:17:40 +0000 (17:17 +0800)]
perf stat: Fix NULL pointer dereference
[ Upstream commit
c0c652fc705de75f4ba52e93053acc1ed3933e74 ]
If config->aggr_map is NULL and config->aggr_get_id is not NULL,
the function print_aggr() will still calling arrg_update_shadow(),
which can result in accessing the invalid pointer.
Fixes:
088519f318be ("perf stat: Move the display functions to stat-display.c")
Signed-off-by: Hongbo Yao <yaohongbo@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wei Li <liwei391@huawei.com>
Link: https://lore.kernel.org/lkml/20200608163625.GC3073@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gaurav Singh [Mon, 8 Jun 2020 16:18:17 +0000 (13:18 -0300)]
perf report: Fix NULL pointer dereference in hists__fprintf_nr_sample_events()
[ Upstream commit
11b6e5482e178055ec1f2444b55f2518713809d1 ]
The 'evname' variable can be NULL, as it is checked a few lines back,
check it before using.
Fixes:
9e207ddfa207 ("perf report: Show call graph from reference events")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/
Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qais Yousef [Mon, 18 May 2020 15:49:31 +0000 (16:49 +0100)]
usb/ehci-platform: Set PM runtime as active on resume
[ Upstream commit
16bdc04cc98ab0c74392ceef2475ecc5e73fcf49 ]
Follow suit of ohci-platform.c and perform pm_runtime_set_active() on
resume.
ohci-platform.c had a warning reported due to the missing
pm_runtime_set_active() [1].
[1] https://lore.kernel.org/lkml/
20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
CC: Tony Prisk <linux@prisktech.co.nz>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Mathias Nyman <mathias.nyman@intel.com>
CC: Oliver Neukum <oneukum@suse.de>
CC: linux-arm-kernel@lists.infradead.org
CC: linux-usb@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20200518154931.6144-3-qais.yousef@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yoshihiro Shimoda [Mon, 27 Jan 2020 08:37:42 +0000 (17:37 +0900)]
usb: host: ehci-platform: add a quirk to avoid stuck
[ Upstream commit
cc7eac1e4afdd151085be4d0341a155760388653 ]
Since EHCI/OHCI controllers on R-Car Gen3 SoCs are possible to
be getting stuck very rarely after a full/low usb device was
disconnected. To detect/recover from such a situation, the controllers
require a special way which poll the EHCI PORTSC register and changes
the OHCI functional state.
So, this patch adds a polling timer into the ehci-platform driver,
and if the ehci driver detects the issue by the EHCI PORTSC register,
the ehci driver removes a companion device (= the OHCI controller)
to change the OHCI functional state to USB Reset once. And then,
the ehci driver adds the companion device again.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/1580114262-25029-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qais Yousef [Mon, 18 May 2020 15:49:30 +0000 (16:49 +0100)]
usb/xhci-plat: Set PM runtime as active on resume
[ Upstream commit
79112cc3c29f4a8c73a21428fbcbcb0afb005e3e ]
Follow suit of ohci-platform.c and perform pm_runtime_set_active() on
resume.
ohci-platform.c had a warning reported due to the missing
pm_runtime_set_active() [1].
[1] https://lore.kernel.org/lkml/
20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
CC: Tony Prisk <linux@prisktech.co.nz>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Mathias Nyman <mathias.nyman@intel.com>
CC: Oliver Neukum <oneukum@suse.de>
CC: linux-arm-kernel@lists.infradead.org
CC: linux-usb@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20200518154931.6144-2-qais.yousef@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrey Ignatov [Fri, 12 Jun 2020 00:08:57 +0000 (17:08 -0700)]
bpf: Fix memlock accounting for sock_hash
[ Upstream commit
60e5ca8a64bad8f3e2e20a1e57846e497361c700 ]
Add missed bpf_map_charge_init() in sock_hash_alloc() and
correspondingly bpf_map_charge_finish() on ENOMEM.
It was found accidentally while working on unrelated selftest that
checks "map->memory.pages > 0" is true for all map types.
Before:
# bpftool m l
...
3692: sockhash name m_sockhash flags 0x0
key 4B value 4B max_entries 8 memlock 0B
After:
# bpftool m l
...
84: sockmap name m_sockmap flags 0x0
key 4B value 4B max_entries 8 memlock 4096B
Fixes:
604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200612000857.2881453-1-rdna@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Brett Creeley [Fri, 5 Jun 2020 17:09:43 +0000 (10:09 -0700)]
iavf: fix speed reporting over virtchnl
[ Upstream commit
e0ef26fbe2b0c62f42ba7667076dc38b693b6fb8 ]
Link speeds are communicated over virtchnl using an enum
virtchnl_link_speed. Currently, the highest link speed is 40Gbps which
leaves us unable to reflect some speeds that an ice VF is capable of.
This causes link speed to be misreported on the iavf driver.
Allow for communicating link speeds using Mbps so that the proper speed can
be reported for an ice VF. Moving away from the enum allows us to
communicate future speed changes without requiring a new enum to be added.
In order to support communicating link speeds over virtchnl in Mbps the
following functionality was added:
- Added u32 link_speed_mbps in the iavf_adapter structure.
- Added the macro ADV_LINK_SUPPORT(_a) to determine if the VF
driver supports communicating link speeds in Mbps.
- Added the function iavf_get_vpe_link_status() to fill the
correct link_status in the event_data union based on the
ADV_LINK_SUPPORT(_a) macro.
- Added the function iavf_set_adapter_link_speed_from_vpe()
to determine whether or not to fill the u32 link_speed_mbps or
enum virtchnl_link_speed link_speed field in the iavf_adapter
structure based on the ADV_LINK_SUPPORT(_a) macro.
- Do not free vf_res in iavf_init_get_resources() as vf_res will be
accessed in iavf_get_link_ksettings(); memset to 0 instead. This
memory is subsequently freed in iavf_remove().
Fixes:
7c710869d64e ("ice: Add handlers for VF netdevice operations")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Sergey Nemov <sergey.nemov@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Li RongQing [Thu, 11 Jun 2020 05:11:06 +0000 (13:11 +0800)]
xdp: Fix xsk_generic_xmit errno
[ Upstream commit
aa2cad0600ed2ca6a0ab39948d4db1666b6c962b ]
Propagate sock_alloc_send_skb error code, not set it to
EAGAIN unconditionally, when fail to allocate skb, which
might cause that user space unnecessary loops.
Fixes:
35fcde7f8deb ("xsk: support for Tx")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1591852266-24017-1-git-send-email-lirongqing@baidu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheng Bin [Thu, 21 May 2020 09:17:21 +0000 (17:17 +0800)]
nfs: set invalid blocks after NFSv4 writes
[ Upstream commit
3a39e778690500066b31fe982d18e2e394d3bce2 ]
Use the following command to test nfsv4(size of file1M is 1MB):
mount -t nfs -o vers=4.0,actimeo=60 127.0.0.1/dir1 /mnt
cp file1M /mnt
du -h /mnt/file1M -->0 within 60s, then 1M
When write is done(cp file1M /mnt), will call this:
nfs_writeback_done
nfs4_write_done
nfs4_write_done_cb
nfs_writeback_update_inode
nfs_post_op_update_inode_force_wcc_locked(change, ctime, mtime
nfs_post_op_update_inode_force_wcc_locked
nfs_set_cache_invalid
nfs_refresh_inode_locked
nfs_update_inode
nfsd write response contains change, ctime, mtime, the flag will be
clear after nfs_update_inode. Howerver, write response does not contain
space_used, previous open response contains space_used whose value is 0,
so inode->i_blocks is still 0.
nfs_getattr -->called by "du -h"
do_update |= force_sync || nfs_attribute_cache_expired -->false in 60s
cache_validity = READ_ONCE(NFS_I(inode)->cache_validity)
do_update |= cache_validity & (NFS_INO_INVALID_ATTR -->false
if (do_update) {
__nfs_revalidate_inode
}
Within 60s, does not send getattr request to nfsd, thus "du -h /mnt/file1M"
is 0.
Add a NFS_INO_INVALID_BLOCKS flag, set it when nfsv4 write is done.
Fixes:
16e143751727 ("NFS: More fine grained attribute tracking")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Wed, 3 Jun 2020 06:24:17 +0000 (08:24 +0200)]
nvme-pci: use simple suspend when a HMB is enabled
[ Upstream commit
b97120b15ebd3de51325084136d3b9c3cce656d6 ]
While the NVMe specification allows the device to access the host memory
buffer in host DRAM from all power states, hosts will fail access to
DRAM during S3 and similar power states.
Fixes:
d916b1be94b6 ("nvme-pci: use host managed power state for suspend")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YiFei Zhu [Wed, 10 Jun 2020 18:41:39 +0000 (13:41 -0500)]
net/filter: Permit reading NET in load_bytes_relative when MAC not set
[ Upstream commit
0f5d82f187e1beda3fe7295dfc500af266a5bd80 ]
Added a check in the switch case on start_header that checks for
the existence of the header, and in the case that MAC is not set
and the caller requests for MAC, -EFAULT. If the caller requests
for NET then MAC's existence is completely ignored.
There is no function to check NET header's existence and as far
as cgroup_skb/egress is concerned it should always be set.
Removed for ptr >= the start of header, considering offset is
bounded unsigned and should always be true. len <= end - mac is
redundant to ptr + len <= end.
Fixes:
3eee1f75f2b9 ("bpf: fix bpf_skb_load_bytes_relative pkt length check")
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/76bb820ddb6a95f59a772ecbd8c8a336f646b362.1591812755.git.zhuyifei@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vitaly Kuznetsov [Tue, 28 Apr 2020 09:38:24 +0000 (11:38 +0200)]
x86/idt: Keep spurious entries unset in system_vectors
[ Upstream commit
1f1fbc70c10e81f70e9fbe2102d439c883269811 ]
With commit
dc20b2d52653 ("x86/idt: Move interrupt gate initialization to
IDT code") non assigned system vectors are also marked as used in
'used_vectors' (now 'system_vectors') bitmap. This makes checks in
arch_show_interrupts() whether a particular system vector is allocated to
always pass and e.g. 'Hyper-V reenlightenment interrupts' entry always
shows up in /proc/interrupts.
Another side effect of having all unassigned system vectors marked as used
is that irq_matrix_debug_show() will wrongly count them among 'System'
vectors.
As it is now ensured that alloc_intr_gate() is not called after init, it is
possible to leave unused entries in 'system_vectors' unset to fix these
issues.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200428093824.1451532-4-vkuznets@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 30 May 2020 08:16:22 +0000 (10:16 +0200)]
scsi: acornscsi: Fix an error handling path in acornscsi_probe()
[ Upstream commit
42c76c9848e13dbe0538d7ae0147a269dfa859cb ]
'ret' is known to be 0 at this point. Explicitly return -ENOMEM if one of
the 'ecardm_iomap()' calls fail.
Link: https://lore.kernel.org/r/20200530081622.577888-1-christophe.jaillet@wanadoo.fr
Fixes:
e95a1b656a98 ("[ARM] rpc: acornscsi: update to new style ecard driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Wed, 10 Jun 2020 05:23:35 +0000 (22:23 -0700)]
libbpf: Handle GCC noreturn-turned-volatile quirk
[ Upstream commit
32022fd97ed34f6812802bf1288db27c313576f4 ]
Handle a GCC quirk of emitting extra volatile modifier in DWARF (and
subsequently preserved in BTF by pahole) for function pointers marked as
__attribute__((noreturn)). This was the way to mark such functions before GCC
2.5 added noreturn attribute. Drop such func_proto modifiers, similarly to how
it's done for array (also to handle GCC quirk/bug).
Such volatile attribute is emitted by GCC only, so existing selftests can't
express such test. Simple repro is like this (compiled with GCC + BTF
generated by pahole):
struct my_struct {
void __attribute__((noreturn)) (*fn)(int);
};
struct my_struct a;
Without this fix, output will be:
struct my_struct {
voidvolatile (*fn)(int);
};
With the fix:
struct my_struct {
void (*fn)(int);
};
Fixes:
351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion")
Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/bpf/20200610052335.2862559-1-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jernej Skrabec [Mon, 13 Apr 2020 09:54:57 +0000 (11:54 +0200)]
drm/sun4i: hdmi ddc clk: Fix size of m divider
[ Upstream commit
54e1e06bcf1cf6e7ac3f86daa5f7454add24b494 ]
m divider in DDC clock register is 4 bits wide. Fix that.
Fixes:
9c5681011a0c ("drm/sun4i: Add HDMI support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200413095457.1176754-1-jernej.skrabec@siol.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jean-Philippe Brucker [Mon, 8 Jun 2020 12:45:32 +0000 (14:45 +0200)]
tracing/probe: Fix bpf_task_fd_query() for kprobes and uprobes
[ Upstream commit
22d5bd6867364b41576a712755271a7d6161abd6 ]
Commit
60d53e2c3b75 ("tracing/probe: Split trace_event related data from
trace_probe") removed the trace_[ku]probe structure from the
trace_event_call->data pointer. As bpf_get_[ku]probe_info() were
forgotten in that change, fix them now. These functions are currently
only used by the bpf_task_fd_query() syscall handler to collect
information about a perf event.
Fixes:
60d53e2c3b75 ("tracing/probe: Split trace_event related data from trace_probe")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/20200608124531.819838-1-jean-philippe@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jakub Sitnicki [Sun, 7 Jun 2020 20:52:29 +0000 (22:52 +0200)]
bpf, sockhash: Synchronize delete from bucket list on map free
[ Upstream commit
75e68e5bf2c7fa9d3e874099139df03d5952a3e1 ]
We can end up modifying the sockhash bucket list from two CPUs when a
sockhash is being destroyed (sock_hash_free) on one CPU, while a socket
that is in the sockhash is unlinking itself from it on another CPU
it (sock_hash_delete_from_link).
This results in accessing a list element that is in an undefined state as
reported by KASAN:
| ==================================================================
| BUG: KASAN: wild-memory-access in sock_hash_free+0x13c/0x280
| Write of size 8 at addr
dead000000000122 by task kworker/2:1/95
|
| CPU: 2 PID: 95 Comm: kworker/2:1 Not tainted 5.7.0-rc7-02961-ge22c35ab0038-dirty #691
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
| Workqueue: events bpf_map_free_deferred
| Call Trace:
| dump_stack+0x97/0xe0
| ? sock_hash_free+0x13c/0x280
| __kasan_report.cold+0x5/0x40
| ? mark_lock+0xbc1/0xc00
| ? sock_hash_free+0x13c/0x280
| kasan_report+0x38/0x50
| ? sock_hash_free+0x152/0x280
| sock_hash_free+0x13c/0x280
| bpf_map_free_deferred+0xb2/0xd0
| ? bpf_map_charge_finish+0x50/0x50
| ? rcu_read_lock_sched_held+0x81/0xb0
| ? rcu_read_lock_bh_held+0x90/0x90
| process_one_work+0x59a/0xac0
| ? lock_release+0x3b0/0x3b0
| ? pwq_dec_nr_in_flight+0x110/0x110
| ? rwlock_bug.part.0+0x60/0x60
| worker_thread+0x7a/0x680
| ? _raw_spin_unlock_irqrestore+0x4c/0x60
| kthread+0x1cc/0x220
| ? process_one_work+0xac0/0xac0
| ? kthread_create_on_node+0xa0/0xa0
| ret_from_fork+0x24/0x30
| ==================================================================
Fix it by reintroducing spin-lock protected critical section around the
code that removes the elements from the bucket on sockhash free.
To do that we also need to defer processing of removed elements, until out
of atomic context so that we can unlink the socket from the map when
holding the sock lock.
Fixes:
90db6d772f74 ("bpf, sockmap: Remove bucket->lock from sock_{hash|map}_free")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200607205229.2389672-3-jakub@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
dihu [Fri, 5 Jun 2020 08:46:25 +0000 (16:46 +0800)]
bpf/sockmap: Fix kernel panic at __tcp_bpf_recvmsg
[ Upstream commit
487082fb7bd2a32b66927d2b22e3a81b072b44f0 ]
When user application calls read() with MSG_PEEK flag to read data
of bpf sockmap socket, kernel panic happens at
__tcp_bpf_recvmsg+0x12c/0x350. sk_msg is not removed from ingress_msg
queue after read out under MSG_PEEK flag is set. Because it's not
judged whether sk_msg is the last msg of ingress_msg queue, the next
sk_msg may be the head of ingress_msg queue, whose memory address of
sg page is invalid. So it's necessary to add check codes to prevent
this problem.
[20759.125457] BUG: kernel NULL pointer dereference, address:
0000000000000008
[20759.132118] CPU: 53 PID: 51378 Comm: envoy Tainted: G E
5.4.32 #1
[20759.140890] Hardware name: Inspur SA5212M4/YZMB-00370-109, BIOS
4.1.12 06/18/2017
[20759.149734] RIP: 0010:copy_page_to_iter+0xad/0x300
[20759.270877] __tcp_bpf_recvmsg+0x12c/0x350
[20759.276099] tcp_bpf_recvmsg+0x113/0x370
[20759.281137] inet_recvmsg+0x55/0xc0
[20759.285734] __sys_recvfrom+0xc8/0x130
[20759.290566] ? __audit_syscall_entry+0x103/0x130
[20759.296227] ? syscall_trace_enter+0x1d2/0x2d0
[20759.301700] ? __audit_syscall_exit+0x1e4/0x290
[20759.307235] __x64_sys_recvfrom+0x24/0x30
[20759.312226] do_syscall_64+0x55/0x1b0
[20759.316852] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: dihu <anny.hu@linux.alibaba.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200605084625.9783-1-anny.hu@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Mon, 8 Jun 2020 20:46:34 +0000 (22:46 +0200)]
ASoC: rt5645: Add platform-data for Asus T101HA
[ Upstream commit
79d4f823a06796656289f97b922493da5690e46c ]
The Asus T101HA uses the default jack-detect mode 3, but instead of
using an analog microphone it is using a DMIC on dmic-data-pin 1,
like the Asus T100HA. Note unlike the T100HA its jack-detect is not
inverted.
Add a DMI quirk with the correct settings for this model.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200608204634.93407-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Mon, 8 Jun 2020 20:46:33 +0000 (22:46 +0200)]
ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT10-A tablet
[ Upstream commit
199a5e8fda54ab3c8c6f6bf980c004e97ebf5ccb ]
The Toshiba Encore WT10-A tablet almost fully works with the default
settings for Bay Trail CR devices. The only issue is that it uses a
digital mic. connected the the DMIC1 input instead of an analog mic.
Add a quirk for this model using the default settings with the input-map
replaced with BYT_RT5640_DMIC1_MAP.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200608204634.93407-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Mon, 8 Jun 2020 19:44:15 +0000 (14:44 -0500)]
ASoC: SOF: nocodec: conditionally set dpcm_capture/dpcm_playback flags
[ Upstream commit
ba4e5abc6c4e173af7c941c03c067263b686665d ]
With additional checks on dailinks, we see errors such as
[ 3.000418] sof-nocodec sof-nocodec: CPU DAI DMIC01 Pin for rtd
NoCodec-6 does not support playback
It's not clear why we set the dpcm_playback and dpcm_capture flags
unconditionally, add a check on number of channels for each direction
to avoid invalid configurations.
Fixes:
8017b8fd37bf5e ('ASoC: SOF: Add Nocodec machine driver support')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200608194415.4663-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bard Liao [Mon, 8 Jun 2020 19:44:13 +0000 (14:44 -0500)]
ASoC: core: only convert non DPCM link to DPCM link
[ Upstream commit
607fa205a7e4dfad28b8a67ab1c985756ddbccb0 ]
Additional checks for valid DAIs expose a corner case, where existing
BE dailinks get modified, e.g. HDMI links are tagged with
dpcm_capture=1 even if the DAIs are for playback.
This patch makes those changes conditional and flags configuration
issues when a BE dailink is has no_pcm=0 but dpcm_playback or
dpcm_capture=1 (which makes no sense).
As discussed on the alsa-devel mailing list, there are redundant flags
for dpcm_playback, dpcm_capture, playback_only, capture_only. This
will have to be cleaned-up in a future update. For now only correct
and flag problematic configurations.
Fixes:
218fe9b7ec7f3 ("ASoC: soc-core: Set dpcm_playback / dpcm_capture")
Suggested-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200608194415.4663-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhihao Cheng [Tue, 2 Jun 2020 01:30:45 +0000 (09:30 +0800)]
afs: Fix memory leak in afs_put_sysnames()
[ Upstream commit
2ca068be09bf8e285036603823696140026dcbe7 ]
Fix afs_put_sysnames() to actually free the specified afs_sysnames
object after its reference count has been decreased to zero and
its contents have been released.
Fixes:
6f8880d8e681557 ("afs: Implement @sys substitution handling")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Biggers [Fri, 5 Jun 2020 04:57:48 +0000 (21:57 -0700)]
f2fs: don't return vmalloc() memory from f2fs_kmalloc()
[ Upstream commit
0b6d4ca04a86b9dababbb76e58d33c437e127b77 ]
kmalloc() returns kmalloc'ed memory, and kvmalloc() returns either
kmalloc'ed or vmalloc'ed memory. But the f2fs wrappers, f2fs_kmalloc()
and f2fs_kvmalloc(), both return both kinds of memory.
It's redundant to have two functions that do the same thing, and also
breaking the standard naming convention is causing bugs since people
assume it's safe to kfree() memory allocated by f2fs_kmalloc(). See
e.g. the various allocations in fs/f2fs/compress.c.
Fix this by making f2fs_kmalloc() just use kmalloc(). And to avoid
re-introducing the allocation failures that the vmalloc fallback was
intended to fix, convert the largest allocations to use f2fs_kvmalloc().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tannerlove [Mon, 8 Jun 2020 19:37:15 +0000 (15:37 -0400)]
selftests/net: in timestamping, strncpy needs to preserve null byte
[ Upstream commit
8027bc0307ce59759b90679fa5d8b22949586d20 ]
If user passed an interface option longer than 15 characters, then
device.ifr_name and hwtstamp.ifr_name became non-null-terminated
strings. The compiler warned about this:
timestamping.c:353:2: warning: ‘strncpy’ specified bound 16 equals \
destination size [-Wstringop-truncation]
353 | strncpy(device.ifr_name, interface, sizeof(device.ifr_name));
Fixes:
cb9eff097831 ("net: new user space API for time stamping of incoming and outgoing packets")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shaokun Zhang [Fri, 5 Jun 2020 09:43:41 +0000 (17:43 +0800)]
drivers/perf: hisi: Fix wrong value for all counters enable
[ Upstream commit
961abd78adcb4c72c343fcd9f9dc5e2ebbe9b448 ]
In L3C uncore PMU drivers, bit16 is used to control all counters enable &
disable. Wrong value is given in the driver and its default value is 1'b1,
it can work because each PMU counter has its own control bits too.
Let's fix the wrong value.
Fixes:
2940bc433370 ("perf: hisi: Add support for HiSilicon SoC L3C PMU driver")
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1591350221-32275-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Max Staudt [Sun, 7 Jun 2020 18:28:12 +0000 (20:28 +0200)]
i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n
[ Upstream commit
cdb555397f438592bab00599037c347b700cf397 ]
This has been found by the Kernel Test Robot:
http://lkml.iu.edu/hypermail/linux/kernel/2006.0/06862.html
With CONFIG_AMIGA_PCMCIA=n, io_mm.h does not pull in amigahw.h and
ZTWO_VADDR is undefined. Add forgotten include to i2c-icy.c
Fixes:
4768e90ecaec ("i2c: Add i2c-icy for I2C on m68k/Amiga")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Logan Gunthorpe [Wed, 9 Jan 2019 19:22:33 +0000 (12:22 -0700)]
NTB: ntb_test: Fix bug when counting remote files
[ Upstream commit
2130c0ba69d69bb21f5c52787f2587db00d13d8a ]
When remote files are counted in get_files_count, without using SSH,
the code returns 0 because there is a colon prepended to $LOC. $VPATH
should have been used instead of $LOC.
Fixes:
06bd0407d06c ("NTB: ntb_test: Update ntb_tool Scratchpad tests")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Tested-by: Alexander Fomichev <fomichev.ru@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Logan Gunthorpe [Wed, 9 Jan 2019 19:22:32 +0000 (12:22 -0700)]
NTB: perf: Fix race condition when run with ntb_test
[ Upstream commit
34d8673a01b053b6231a995a4eec9341163d63be ]
When running ntb_test, the script tries to run the ntb_perf test
immediately after probing the modules. Since adding multi-port support,
this fails seeing the new initialization procedure in ntb_perf
can not complete instantly.
To fix this we add a completion which is waited on when a test is
started. In this way, run can be written any time after the module is
loaded and it will wait for the initialization to complete instead of
sending an error.
Fixes:
5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Tested-by: Alexander Fomichev <fomichev.ru@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Logan Gunthorpe [Wed, 9 Jan 2019 19:22:31 +0000 (12:22 -0700)]
NTB: perf: Fix support for hardware that doesn't have port numbers
[ Upstream commit
b54369a248c2e033bfcf5d6917e08cf9d73d54a6 ]
Legacy drivers do not have port numbers (but is reliably only two ports)
and was broken by the recent commit that added mult-port support to
ntb_perf. This is especially important to support the cross link
topology which is perfectly symmetric and cannot assign unique port
numbers easily.
Hardware that returns zero for both the local port and the peer should
just always use gidx=0 for the only peer.
Fixes:
5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Tested-by: Alexander Fomichev <fomichev.ru@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Logan Gunthorpe [Wed, 9 Jan 2019 19:22:30 +0000 (12:22 -0700)]
NTB: perf: Don't require one more memory window than number of peers
[ Upstream commit
a9c4211ac918ade1522aced6b5acfbe824722f7d ]
ntb_perf should not require more than one memory window per peer. This
was probably an off-by-one error.
Fixes:
5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Tested-by: Alexander Fomichev <fomichev.ru@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Logan Gunthorpe [Wed, 9 Jan 2019 19:22:27 +0000 (12:22 -0700)]
NTB: Revert the change to use the NTB device dev for DMA allocations
[ Upstream commit
40da7d9a93c8941737ef4a1208d32c13ce017fe1 ]
Commit
417cf39cfea9 ("NTB: Set dma mask and dma coherent mask to NTB
devices") started using the NTB device for DMA allocations which was
turns out was wrong. If the IOMMU is enabled, such alloctanions will
always fail with messages such as:
DMAR: Allocating domain for 0000:02:00.1 failed
This is because the IOMMU has not setup the device for such use.
Change the tools back to using the PCI device for allocations seeing
it doesn't make sense to add an IOMMU group for the non-physical NTB
device. Also remove the code that sets the DMA mask as it no longer
makes sense to do this.
Fixes:
7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Tested-by: Alexander Fomichev <fomichev.ru@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Logan Gunthorpe [Wed, 9 Jan 2019 19:22:26 +0000 (12:22 -0700)]
NTB: ntb_tool: reading the link file should not end in a NULL byte
[ Upstream commit
912e12813dd03c602e4922fc34709ec4d4380cf0 ]
When running ntb_test this warning is issued:
./ntb_test.sh: line 200: warning: command substitution: ignored null
byte in input
This is caused by the kernel returning one more byte than is necessary
when reading the link file.
Reduce the number of bytes read back to 2 as it was before the
commit that regressed this.
Fixes:
7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Tested-by: Alexander Fomichev <fomichev.ru@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sanjay R Mehta [Wed, 6 May 2020 04:21:50 +0000 (23:21 -0500)]
ntb_tool: pass correct struct device to dma_alloc_coherent
[ Upstream commit
433efe720674efd9fdbcef78be75793393cf05db ]
Currently, ntb->dev is passed to dma_alloc_coherent
and dma_free_coherent calls. The returned dma_addr_t
is the CPU physical address. This works fine as long
as IOMMU is disabled. But when IOMMU is enabled, we
need to make sure that IOVA is returned for dma_addr_t.
So the correct way to achieve this is by changing the
first parameter of dma_alloc_coherent() as ntb->pdev->dev
instead.
Fixes:
5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sanjay R Mehta [Wed, 6 May 2020 04:21:49 +0000 (23:21 -0500)]
ntb_perf: pass correct struct device to dma_alloc_coherent
[ Upstream commit
98f4e140264eeb52f22ff05be6b6dd48237255ac ]
Currently, ntb->dev is passed to dma_alloc_coherent
and dma_free_coherent calls. The returned dma_addr_t
is the CPU physical address. This works fine as long
as IOMMU is disabled. But when IOMMU is enabled, we
need to make sure that IOVA is returned for dma_addr_t.
So the correct way to achieve this is by changing the
first parameter of dma_alloc_coherent() as ntb->pdev->dev
instead.
Fixes:
5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Murphy [Fri, 5 Jun 2020 14:01:06 +0000 (09:01 -0500)]
net: marvell: Fix OF_MDIO config check
[ Upstream commit
5cd119d9a05f1c1a08778a7305b4ca0f16bc1e20 ]
When CONFIG_OF_MDIO is set to be a module the code block is not
compiled. Use the IS_ENABLED macro that checks for both built in as
well as module.
Fixes:
cf41a51db8985 ("of/phylib: Use device tree properties to initialize Marvell PHYs.")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bob Peterson [Thu, 4 Jun 2020 19:28:58 +0000 (14:28 -0500)]
gfs2: fix use-after-free on transaction ail lists
[ Upstream commit
83d060ca8d90fa1e3feac227f995c013100862d3 ]
Before this patch, transactions could be merged into the system
transaction by function gfs2_merge_trans(), but the transaction ail
lists were never merged. Because the ail flushing mechanism can run
separately, bd elements can be attached to the transaction's buffer
list during the transaction (trans_add_meta, etc) but quickly moved
to its ail lists. Later, in function gfs2_trans_end, the transaction
can be freed (by gfs2_trans_end) while it still has bd elements
queued to its ail lists, which can cause it to either lose track of
the bd elements altogether (memory leak) or worse, reference the bd
elements after the parent transaction has been freed.
Although I've not seen any serious consequences, the problem becomes
apparent with the previous patch's addition of:
gfs2_assert_warn(sdp, list_empty(&tr->tr_ail1_list));
to function gfs2_trans_free().
This patch adds logic into gfs2_merge_trans() to move the merged
transaction's ail lists to the sdp transaction. This prevents the
use-after-free. To do this properly, we need to hold the ail lock,
so we pass sdp into the function instead of the transaction itself.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chaitanya Kulkarni [Thu, 4 Jun 2020 07:13:30 +0000 (00:13 -0700)]
blktrace: fix endianness for blk_log_remap()
[ Upstream commit
5aec598c456fe3c1b71a1202cbb42bdc2a643277 ]
The function blk_log_remap() can be simplified by removing the
call to get_pdu_remap() that copies the values into extra variable to
print the data, which also fixes the endiannness warning reported by
sparse.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chaitanya Kulkarni [Thu, 4 Jun 2020 07:13:29 +0000 (00:13 -0700)]
blktrace: fix endianness in get_pdu_int()
[ Upstream commit
71df3fd82e7cccec7b749a8607a4662d9f7febdd ]
In function get_pdu_len() replace variable type from __u64 to
__be64. This fixes sparse warning.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chaitanya Kulkarni [Thu, 4 Jun 2020 07:13:28 +0000 (00:13 -0700)]
blktrace: use errno instead of bi_status
[ Upstream commit
48bc3cd3e07a1486f45d9971c75d6090976c3b1b ]
In blk_add_trace_spliti() blk_add_trace_bio_remap() use
blk_status_to_errno() to pass the error instead of pasing the bi_status.
This fixes the sparse warning.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ram Pai [Thu, 4 Jun 2020 23:52:05 +0000 (16:52 -0700)]
selftests/vm/pkeys: fix alloc_random_pkey() to make it really random
[ Upstream commit
6e373263ce07eeaa6410843179535fbdf561fc31 ]
alloc_random_pkey() was allocating the same pkey every time. Not all
pkeys were geting tested. This fixes it.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/0162f55816d4e783a0d6e49e554d0ab9a3c9a23b.1585646528.git.sandipan@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Thu, 4 Jun 2020 23:50:30 +0000 (16:50 -0700)]
include/linux/bitops.h: avoid clang shift-count-overflow warnings
[ Upstream commit
bd93f003b7462ae39a43c531abca37fe7073b866 ]
Clang normally does not warn about certain issues in inline functions when
it only happens in an eliminated code path. However if something else
goes wrong, it does tend to complain about the definition of hweight_long()
on 32-bit targets:
include/linux/bitops.h:75:41: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
return sizeof(w) == 4 ? hweight32(w) : hweight64(w);
^~~~~~~~~~~~
include/asm-generic/bitops/const_hweight.h:29:49: note: expanded from macro 'hweight64'
define hweight64(w) (__builtin_constant_p(w) ? __const_hweight64(w) : __arch_hweight64(w))
^~~~~~~~~~~~~~~~~~~~
include/asm-generic/bitops/const_hweight.h:21:76: note: expanded from macro '__const_hweight64'
define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32))
^ ~~
include/asm-generic/bitops/const_hweight.h:20:49: note: expanded from macro '__const_hweight32'
define __const_hweight32(w) (__const_hweight16(w) + __const_hweight16((w) >> 16))
^
include/asm-generic/bitops/const_hweight.h:19:72: note: expanded from macro '__const_hweight16'
define __const_hweight16(w) (__const_hweight8(w) + __const_hweight8((w) >> 8 ))
^
include/asm-generic/bitops/const_hweight.h:12:9: note: expanded from macro '__const_hweight8'
(!!((w) & (1ULL << 2))) + \
Adding an explicit cast to __u64 avoids that warning and makes it easier
to read other output.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: http://lkml.kernel.org/r/20200505135513.65265-1-arnd@arndb.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jann Horn [Thu, 4 Jun 2020 23:50:17 +0000 (16:50 -0700)]
lib/zlib: remove outdated and incorrect pre-increment optimization
[ Upstream commit
acaab7335bd6f0c0b54ce3a00bd7f18222ce0f5f ]
The zlib inflate code has an old micro-optimization based on the
assumption that for pre-increment memory accesses, the compiler will
generate code that fits better into the processor's pipeline than what
would be generated for post-increment memory accesses.
This optimization was already removed in upstream zlib in 2016:
https://github.com/madler/zlib/commit/
9aaec95e8211
This optimization causes UB according to C99, which says in section 6.5.6
"Additive operators": "If both the pointer operand and the result point to
elements of the same array object, or one past the last element of the
array object, the evaluation shall not produce an overflow; otherwise, the
behavior is undefined".
This UB is not only a theoretical concern, but can also cause trouble for
future work on compiler-based sanitizers.
According to the zlib commit, this optimization also is not optimal
anymore with modern compilers.
Replace uses of OFF, PUP and UP_UNALIGNED with their definitions in the
POSTINC case, and remove the macro definitions, just like in the upstream
patch.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Link: http://lkml.kernel.org/r/20200507123112.252723-1-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiri Benc [Wed, 3 Jun 2020 09:12:14 +0000 (11:12 +0200)]
geneve: change from tx_error to tx_dropped on missing metadata
[ Upstream commit
9d149045b3c0e44c049cdbce8a64e19415290017 ]
If the geneve interface is in collect_md (external) mode, it can't send any
packets submitted directly to its net interface, as such packets won't have
metadata attached. This is expected.
However, the kernel itself sends some packets to the interface, most
notably, IPv6 DAD, IPv6 multicast listener reports, etc. This is not wrong,
as tunnel metadata can be specified in routing table (although technically,
that has never worked for IPv6, but hopefully will be fixed eventually) and
then the interface must correctly participate in IPv6 housekeeping.
The problem is that any such attempt increases the tx_error counter. Just
bringing up a geneve interface with IPv6 enabled is enough to see a number
of tx_errors. That causes confusion among users, prompting them to find
a network error where there is none.
Change the counter used to tx_dropped. That better conveys the meaning
(there's nothing wrong going on, just some packets are getting dropped) and
hopefully will make admins panic less.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tero Kristo [Wed, 27 May 2020 12:24:29 +0000 (15:24 +0300)]
crypto: omap-sham - add proper load balancing support for multicore
[ Upstream commit
281c377872ff5d15d80df25fc4df02d2676c7cde ]
The current implementation of the multiple accelerator core support for
OMAP SHA does not work properly. It always picks up the first probed
accelerator core if this is available, and rest of the book keeping also
gets confused if there are two cores available. Add proper load
balancing support for SHA, and also fix any bugs related to the
multicore support while doing it.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicholas Kazlauskas [Wed, 3 Jun 2020 00:42:33 +0000 (20:42 -0400)]
drm/amd/display: Revalidate bandwidth before commiting DC updates
[ Upstream commit
a24eaa5c51255b344d5a321f1eeb3205f2775498 ]
[Why]
Whenever we switch between tiled formats without also switching pixel
formats or doing anything else that recreates the DC plane state we
can run into underflow or hangs since we're not updating the
DML parameters before committing to the hardware.
[How]
If the update type is FULL then call validate_bandwidth again to update
the DML parmeters before committing the state.
This is basically just a workaround and protective measure against
update types being added DC where we could run into this issue in
the future.
We can only fully validate the state in advance before applying it to
the hardware if we recreate all the plane and stream states since
we can't modify what's currently in use.
The next step is to update DM to ensure that we're creating the plane
and stream states for whatever could potentially be a full update in
DC to pre-emptively recreate the state for DC global validation.
The workaround can stay until this has been fixed in DM.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
J. Bruce Fields [Wed, 3 Jun 2020 15:12:32 +0000 (11:12 -0400)]
nfsd: safer handling of corrupted c_type
[ Upstream commit
c25bf185e57213b54ea0d632ac04907310993433 ]
This can only happen if there's a bug somewhere, so let's make it a WARN
not a printk. Also, I think it's safest to ignore the corruption rather
than trying to fix it by removing a cache entry.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 30 May 2020 20:49:55 +0000 (22:49 +0200)]
pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()'
[ Upstream commit
11d8da5cabf7c6c3263ba2cd9c00260395867048 ]
'pinctrl_unregister()' should not be called to undo
'devm_pinctrl_register_and_init()', it is already handled by the framework.
This simplifies the error handling paths of the probe function.
The 'imx_free_resources()' can be removed as well.
Fixes:
a51c158bf0f7 ("pinctrl: imx: use radix trees for groups and functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20200530204955.588962-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 30 May 2020 20:19:52 +0000 (22:19 +0200)]
pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()'
[ Upstream commit
9eb728321286c4b31e964d2377fca2368526d408 ]
When 'pinctrl_register()' has been turned into 'devm_pinctrl_register()',
an error handling path has not been updated.
Axe a now unneeded 'pinctrl_unregister()'.
Fixes:
e55e025d1687 ("pinctrl: imxl: Use devm_pinctrl_register() for pinctrl registration")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200530201952.585798-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Can Guo [Thu, 28 May 2020 02:24:42 +0000 (19:24 -0700)]
scsi: ufs: Don't update urgent bkops level when toggling auto bkops
[ Upstream commit
be32acff43800c87dc5c707f5d47cc607b76b653 ]
Urgent bkops level is used to compare against actual bkops status read from
UFS device. Urgent bkops level is set during initialization and might be
updated in exception event handler during runtime. But it should not be
updated to the actual bkops status every time when auto bkops is toggled.
Otherwise, if urgent bkops level is updated to 0, auto bkops shall always
be kept enabled.
Link: https://lore.kernel.org/r/1590632686-17866-1-git-send-email-cang@codeaurora.org
Fixes:
24366c2afbb0 ("scsi: ufs: Recheck bkops level if bkops is disabled")
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qiushi Wu [Thu, 28 May 2020 20:13:53 +0000 (15:13 -0500)]
scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj
[ Upstream commit
0267ffce562c8bbf9b57ebe0e38445ad04972890 ]
kobject_init_and_add() takes reference even when it fails. If this
function returns an error, kobject_put() must be called to properly
clean up the memory associated with the object.
Link: https://lore.kernel.org/r/20200528201353.14849-1-wu000273@umn.edu
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bob Peterson [Wed, 29 Apr 2020 13:45:54 +0000 (08:45 -0500)]
gfs2: Allow lock_nolock mount to specify jid=X
[ Upstream commit
ea22eee4e6027d8927099de344f7fff43c507ef9 ]
Before this patch, a simple typo accidentally added \n to the jid=
string for lock_nolock mounts. This made it impossible to mount a
gfs2 file system with a journal other than journal0. Thus:
mount -tgfs2 -o hostdata="jid=1" <device> <mount pt>
Resulted in:
mount: wrong fs type, bad option, bad superblock on <device>
In most cases this is not a problem. However, for debugging and
testing purposes we sometimes want to test the integrity of other
journals. This patch removes the unnecessary \n and thus allows
lock_nolock users to specify an alternate journal.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
J. Bruce Fields [Mon, 1 Jun 2020 21:44:45 +0000 (17:44 -0400)]
nfsd4: make drc_slab global, not per-net
[ Upstream commit
027690c75e8fd91b60a634d31c4891a6e39d45bd ]
I made every global per-network-namespace instead. But perhaps doing
that to this slab was a step too far.
The kmem_cache_create call in our net init method also seems to be
responsible for this lockdep warning:
[ 45.163710] Unable to find swap-space signature
[ 45.375718] trinity-c1 (855): attempted to duplicate a private mapping with mremap. This is not supported.
[ 46.055744] futex_wake_op: trinity-c1 tries to shift op by -209; fix this program
[ 51.011723]
[ 51.013378] ======================================================
[ 51.013875] WARNING: possible circular locking dependency detected
[ 51.014378] 5.2.0-rc2 #1 Not tainted
[ 51.014672] ------------------------------------------------------
[ 51.015182] trinity-c2/886 is trying to acquire lock:
[ 51.015593]
000000005405f099 (slab_mutex){+.+.}, at: slab_attr_store+0xa2/0x130
[ 51.016190]
[ 51.016190] but task is already holding lock:
[ 51.016652]
00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500
[ 51.017266]
[ 51.017266] which lock already depends on the new lock.
[ 51.017266]
[ 51.017909]
[ 51.017909] the existing dependency chain (in reverse order) is:
[ 51.018497]
[ 51.018497] -> #1 (kn->count#43){++++}:
[ 51.018956] __lock_acquire+0x7cf/0x1a20
[ 51.019317] lock_acquire+0x17d/0x390
[ 51.019658] __kernfs_remove+0x892/0xae0
[ 51.020020] kernfs_remove_by_name_ns+0x78/0x110
[ 51.020435] sysfs_remove_link+0x55/0xb0
[ 51.020832] sysfs_slab_add+0xc1/0x3e0
[ 51.021332] __kmem_cache_create+0x155/0x200
[ 51.021720] create_cache+0xf5/0x320
[ 51.022054] kmem_cache_create_usercopy+0x179/0x320
[ 51.022486] kmem_cache_create+0x1a/0x30
[ 51.022867] nfsd_reply_cache_init+0x278/0x560
[ 51.023266] nfsd_init_net+0x20f/0x5e0
[ 51.023623] ops_init+0xcb/0x4b0
[ 51.023928] setup_net+0x2fe/0x670
[ 51.024315] copy_net_ns+0x30a/0x3f0
[ 51.024653] create_new_namespaces+0x3c5/0x820
[ 51.025257] unshare_nsproxy_namespaces+0xd1/0x240
[ 51.025881] ksys_unshare+0x506/0x9c0
[ 51.026381] __x64_sys_unshare+0x3a/0x50
[ 51.026937] do_syscall_64+0x110/0x10b0
[ 51.027509] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 51.028175]
[ 51.028175] -> #0 (slab_mutex){+.+.}:
[ 51.028817] validate_chain+0x1c51/0x2cc0
[ 51.029422] __lock_acquire+0x7cf/0x1a20
[ 51.029947] lock_acquire+0x17d/0x390
[ 51.030438] __mutex_lock+0x100/0xfa0
[ 51.030995] mutex_lock_nested+0x27/0x30
[ 51.031516] slab_attr_store+0xa2/0x130
[ 51.032020] sysfs_kf_write+0x11d/0x180
[ 51.032529] kernfs_fop_write+0x32a/0x500
[ 51.033056] do_loop_readv_writev+0x21d/0x310
[ 51.033627] do_iter_write+0x2e5/0x380
[ 51.034148] vfs_writev+0x170/0x310
[ 51.034616] do_pwritev+0x13e/0x160
[ 51.035100] __x64_sys_pwritev+0xa3/0x110
[ 51.035633] do_syscall_64+0x110/0x10b0
[ 51.036200] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 51.036924]
[ 51.036924] other info that might help us debug this:
[ 51.036924]
[ 51.037876] Possible unsafe locking scenario:
[ 51.037876]
[ 51.038556] CPU0 CPU1
[ 51.039130] ---- ----
[ 51.039676] lock(kn->count#43);
[ 51.040084] lock(slab_mutex);
[ 51.040597] lock(kn->count#43);
[ 51.041062] lock(slab_mutex);
[ 51.041320]
[ 51.041320] *** DEADLOCK ***
[ 51.041320]
[ 51.041793] 3 locks held by trinity-c2/886:
[ 51.042128] #0:
000000001f55e152 (sb_writers#5){.+.+}, at: vfs_writev+0x2b9/0x310
[ 51.042739] #1:
00000000c7d6c034 (&of->mutex){+.+.}, at: kernfs_fop_write+0x25b/0x500
[ 51.043400] #2:
00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
3ba75830ce17 "drc containerization"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luis Henriques [Mon, 18 May 2020 17:47:26 +0000 (18:47 +0100)]
ceph: don't return -ESTALE if there's still an open file
[ Upstream commit
878dabb64117406abd40977b87544d05bb3031fc ]
Similarly to commit
03f219041fdb ("ceph: check i_nlink while converting
a file handle to dentry"), this fixes another corner case with
name_to_handle_at/open_by_handle_at. The issue has been detected by
xfstest generic/467, when doing:
- name_to_handle_at("/cephfs/myfile")
- open("/cephfs/myfile")
- unlink("/cephfs/myfile")
- sync; sync;
- drop caches
- open_by_handle_at()
The call to open_by_handle_at should not fail because the file hasn't been
deleted yet (only unlinked) and we do have a valid handle to it. -ESTALE
shall be returned only if i_nlink is 0 *and* i_count is 1.
This patch also makes sure we have LINK caps before checking i_nlink.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ben Skeggs [Fri, 29 May 2020 05:18:47 +0000 (15:18 +1000)]
drm/nouveau/disp/gm200-: fix NV_PDISP_SOR_HDMI2_CTRL(n) selection
[ Upstream commit
a1ef8bad506e4ffa0c57ac5f8cb99ab5cbc3b1fc ]
This is a SOR register, and not indexed by the bound head.
Fixes display not coming up on high-bandwidth HDMI displays under a
number of configurations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stafford Horne [Wed, 22 Apr 2020 11:24:11 +0000 (20:24 +0900)]
openrisc: Fix issue with argument clobbering for clone/fork
[ Upstream commit
6bd140e14d9aaa734ec37985b8b20a96c0ece948 ]
Working on the OpenRISC glibc port I found that sometimes clone was
working strange. That the tls data argument sent in r7 was always
wrong. Further investigation revealed that the arguments were getting
clobbered in the entry code. This patch removes the code that writes to
the argument registers. This was likely due to some old code hanging
around.
This patch fixes this up for clone and fork. This fork clobber is
harmless but also useless so remove.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Sat, 2 May 2020 12:38:23 +0000 (13:38 +0100)]
rxrpc: Adjust /proc/net/rxrpc/calls to display call->debug_id not user_ID
[ Upstream commit
32f71aa497cfb23d37149c2ef16ad71fce2e45e2 ]
The user ID value isn't actually much use - and leaks a kernel pointer or a
userspace value - so replace it with the call debug ID, which appears in trace
points.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Yongjun [Wed, 29 Apr 2020 09:35:03 +0000 (09:35 +0000)]
mailbox: zynqmp-ipi: Fix NULL vs IS_ERR() check in zynqmp_ipi_mbox_probe()
[ Upstream commit
445aeeb569f8d7904f8cf80b7c6826bb651ef80e ]
In case of error, the function devm_ioremap() returns NULL pointer not
ERR_PTR(). So we should check whether the return value of devm_ioremap()
is NULL instead of IS_ERR.
Fixes:
4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuhong Yuan [Thu, 28 May 2020 10:39:50 +0000 (18:39 +0800)]
rtc: rv3028: Add missed check for devm_regmap_init_i2c()
[ Upstream commit
c3b29bf6f166f6ed5f04f9c125477358e0e25df8 ]
rv3028_probe() misses a check for devm_regmap_init_i2c().
Add the missed check to fix it.
Fixes:
e6e7376cfd7b ("rtc: rv3028: add new driver")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200528103950.912353-1-hslester96@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qiushi Wu [Thu, 28 May 2020 02:01:09 +0000 (21:01 -0500)]
vfio/mdev: Fix reference count leak in add_mdev_supported_type
[ Upstream commit
aa8ba13cae3134b8ef1c1b6879f66372531da738 ]
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object. Thus,
replace kfree() by kobject_put() to fix this issue. Previous
commit "
b8eb718348b8" fixed a similar problem.
Fixes:
7b96953bc640 ("vfio: Mediated device Core driver")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiyu Yang [Mon, 25 May 2020 14:12:46 +0000 (22:12 +0800)]
ASoC: fsl_asrc_dma: Fix dma_chan leak when config DMA channel failed
[ Upstream commit
36124fb19f1ae68a500cd76a76d40c6e81bee346 ]
fsl_asrc_dma_hw_params() invokes dma_request_channel() or
fsl_asrc_get_dma_channel(), which returns a reference of the specified
dma_chan object to "pair->dma_chan[dir]" with increased refcnt.
The reference counting issue happens in one exception handling path of
fsl_asrc_dma_hw_params(). When config DMA channel failed for Back-End,
the function forgets to decrease the refcnt increased by
dma_request_channel() or fsl_asrc_get_dma_channel(), causing a refcnt
leak.
Fix this issue by calling dma_release_channel() when config DMA channel
failed.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1590415966-52416-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sun, 10 May 2020 09:53:03 +0000 (11:53 +0200)]
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
[ Upstream commit
bc84cff2c92ae5ccb2c37da73756e7174b1b430f ]
In some error handling paths, a call to 'iio_channel_get()' is not balanced
by a corresponding call to 'iio_channel_release()'.
This can be achieved easily by using the devm_ variant of
'iio_channel_get()'.
This has the extra benefit to simplify the remove function.
Fixes:
19939860dcae ("extcon: adc_jack: adc-jack driver to support 3.5 pi or simliar devices")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
huhai [Thu, 21 May 2020 07:26:48 +0000 (17:26 +1000)]
powerpc/4xx: Don't unmap NULL mbase
[ Upstream commit
bcec081ecc940fc38730b29c743bbee661164161 ]
Signed-off-by: huhai <huhai@tj.kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200521072648.1254699-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Mon, 18 May 2020 18:10:43 +0000 (11:10 -0700)]
input: i8042 - Remove special PowerPC handling
[ Upstream commit
e4f4ffa8a98c24a4ab482669b1e2b4cfce3f52f4 ]
This causes a build error with CONFIG_WALNUT because kb_cs and kb_data
were removed in commit
917f0af9e5a9 ("powerpc: Remove arch/ppc and
include/asm-ppc").
ld.lld: error: undefined symbol: kb_cs
> referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
ld.lld: error: undefined symbol: kb_data
> referenced by i8042.c:309 (drivers/input/serio/i8042.c:309)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced by i8042-ppcio.h:33 (drivers/input/serio/i8042-ppcio.h:33)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced by i8042.c:319 (drivers/input/serio/i8042.c:319)
> input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
> referenced 15 more times
Presumably since nobody has noticed this for the last 12 years, there is
not anyone actually trying to use this driver so we can just remove this
special walnut code and use the generic header so it builds for all
configurations.
Fixes:
917f0af9e5a9 ("powerpc: Remove arch/ppc and include/asm-ppc")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20200518181043.3363953-1-natechancellor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Wed, 20 May 2020 12:04:14 +0000 (15:04 +0300)]
of: Fix a refcounting bug in __of_attach_node_sysfs()
[ Upstream commit
8a325dd06f2358ea0888e4ff1c9ca4bc23bd53f3 ]
The problem in this code is that if kobject_add() fails, then it should
call of_node_put(np) to drop the reference count. I've actually moved
the of_node_get(np) later in the function to avoid needing to do clean
up.
Fixes:
5b2c2f5a0ea3 ("of: overlay: add missing of_node_get() in __of_attach_node_sysfs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Olga Kornievskaia [Sun, 26 Apr 2020 15:30:00 +0000 (11:30 -0400)]
NFSv4.1 fix rpc_call_done assignment for BIND_CONN_TO_SESSION
[ Upstream commit
1c709b766e73e54d64b1dde1b7cfbcf25bcb15b9 ]
Fixes:
02a95dee8cf0 ("NFS add callback_ops to nfs4_proc_bind_conn_to_session_callback")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fedor Tokarev [Sat, 28 Mar 2020 11:56:55 +0000 (14:56 +0300)]
net: sunrpc: Fix off-by-one issues in 'rpc_ntop6'
[ Upstream commit
118917d696dc59fd3e1741012c2f9db2294bed6f ]
Fix off-by-one issues in 'rpc_ntop6':
- 'snprintf' returns the number of characters which would have been
written if enough space had been available, excluding the terminating
null byte. Thus, a return value of 'sizeof(scopebuf)' means that the
last character was dropped.
- 'strcat' adds a terminating null byte to the string, thus if len ==
buflen, the null byte is written past the end of the buffer.
Signed-off-by: Fedor Tokarev <ftokarev@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Williams [Thu, 21 May 2020 21:06:17 +0000 (14:06 -0700)]
/dev/mem: Revoke mappings when a driver claims the region
[ Upstream commit
3234ac664a870e6ea69ae3a57d824cd7edbeacc5 ]
Close the hole of holding a mapping over kernel driver takeover event of
a given address range.
Commit
90a545e98126 ("restrict /dev/mem to idle io memory ranges")
introduced CONFIG_IO_STRICT_DEVMEM with the goal of protecting the
kernel against scenarios where a /dev/mem user tramples memory that a
kernel driver owns. However, this protection only prevents *new* read(),
write() and mmap() requests. Established mappings prior to the driver
calling request_mem_region() are left alone.
Especially with persistent memory, and the core kernel metadata that is
stored there, there are plentiful scenarios for a /dev/mem user to
violate the expectations of the driver and cause amplified damage.
Teach request_mem_region() to find and shoot down active /dev/mem
mappings that it believes it has successfully claimed for the exclusive
use of the driver. Effectively a driver call to request_mem_region()
becomes a hole-punch on the /dev/mem device.
The typical usage of unmap_mapping_range() is part of
truncate_pagecache() to punch a hole in a file, but in this case the
implementation is only doing the "first half" of a hole punch. Namely it
is just evacuating current established mappings of the "hole", and it
relies on the fact that /dev/mem establishes mappings in terms of
absolute physical address offsets. Once existing mmap users are
invalidated they can attempt to re-establish the mapping, or attempt to
continue issuing read(2) / write(2) to the invalidated extent, but they
will then be subject to the CONFIG_IO_STRICT_DEVMEM checking that can
block those subsequent accesses.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes:
90a545e98126 ("restrict /dev/mem to idle io memory ranges")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/159009507306.847224.8502634072429766747.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Hubbard [Wed, 27 May 2020 01:26:26 +0000 (18:26 -0700)]
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
[ Upstream commit
57343d51613227373759f5b0f2eede257fd4b82e ]
This fixes the case of get_user_pages_fast() returning a -errno.
The result needs to be stored in a signed integer. And for safe
signed/unsigned comparisons, it's best to keep everything signed.
And get_user_pages_fast() also expects a signed value for number
of pages to pin.
Therefore, change most relevant variables, from u32 to int. Leave
"n" unsigned, for convenience in checking for overflow. And provide
a WARN_ON_ONCE() and early return, if overflow occurs.
Also, as long as we're tidying up: rename the page array from page,
to pages, in order to match the conventions used in most other call
sites.
Fixes:
20ec628e8007e ("misc: xilinx_sdfec: Add ability to configure LDPC")
Cc: Derek Kiernan <derek.kiernan@xilinx.com>
Cc: Dragan Cvetic <dragan.cvetic@xilinx.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/r/20200527012628.1100649-2-jhubbard@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eddie James [Wed, 8 Apr 2020 20:36:16 +0000 (15:36 -0500)]
clk: ast2600: Fix AHB clock divider for A1
[ Upstream commit
2d491066ccd4286538450c227fc5094ceb04b494 ]
The latest specs for the AST2600 A1 chip include some different bit
definitions for calculating the AHB clock divider. Implement these in
order to get the correct AHB clock value in Linux.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lkml.kernel.org/r/20200408203616.4031-1-eajames@linux.ibm.com
Fixes:
d3d04f6c330a ("clk: Add support for AST2600 SoC")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chunyan Zhang [Tue, 19 May 2020 03:00:36 +0000 (11:00 +0800)]
clk: sprd: return correct type of value for _sprd_pll_recalc_rate
[ Upstream commit
c2f30986d418f26abefc2eec90ebf06716c970d2 ]
The function _sprd_pll_recalc_rate() defines return value to unsigned
long, but it would return a negative value when malloc fail, changing
to return its parent_rate makes more sense, since if the callback
.recalc_rate() is not set, the framework returns the parent_rate as
well.
Fixes:
3e37b005580b ("clk: sprd: add adjustable pll support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lkml.kernel.org/r/20200519030036.1785-2-zhang.lyra@gmail.com
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Sun, 10 May 2020 05:18:34 +0000 (01:18 -0400)]
KVM: PPC: Book3S: Fix some RCU-list locks
[ Upstream commit
ab8b65be183180c3eef405d449163964ecc4b571 ]
It is unsafe to traverse kvm->arch.spapr_tce_tables and
stt->iommu_tables without the RCU read lock held. Also, add
cond_resched_rcu() in places with the RCU read lock held that could take
a while to finish.
arch/powerpc/kvm/book3s_64_vio.c:76 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by qemu-kvm/4265.
stack backtrace:
CPU: 96 PID: 4265 Comm: qemu-kvm Not tainted 5.7.0-rc4-next-
20200508+ #2
Call Trace:
[
c000201a8690f720] [
c000000000715948] dump_stack+0xfc/0x174 (unreliable)
[
c000201a8690f770] [
c0000000001d9470] lockdep_rcu_suspicious+0x140/0x164
[
c000201a8690f7f0] [
c008000010b9fb48] kvm_spapr_tce_release_iommu_group+0x1f0/0x220 [kvm]
[
c000201a8690f870] [
c008000010b8462c] kvm_spapr_tce_release_vfio_group+0x54/0xb0 [kvm]
[
c000201a8690f8a0] [
c008000010b84710] kvm_vfio_destroy+0x88/0x140 [kvm]
[
c000201a8690f8f0] [
c008000010b7d488] kvm_put_kvm+0x370/0x600 [kvm]
[
c000201a8690f990] [
c008000010b7e3c0] kvm_vm_release+0x38/0x60 [kvm]
[
c000201a8690f9c0] [
c0000000005223f4] __fput+0x124/0x330
[
c000201a8690fa20] [
c000000000151cd8] task_work_run+0xb8/0x130
[
c000201a8690fa70] [
c0000000001197e8] do_exit+0x4e8/0xfa0
[
c000201a8690fb70] [
c00000000011a374] do_group_exit+0x64/0xd0
[
c000201a8690fbb0] [
c000000000132c90] get_signal+0x1f0/0x1200
[
c000201a8690fcc0] [
c000000000020690] do_notify_resume+0x130/0x3c0
[
c000201a8690fda0] [
c000000000038d64] syscall_exit_prepare+0x1a4/0x280
[
c000201a8690fe20] [
c00000000000c8f8] system_call_common+0xf8/0x278
====
arch/powerpc/kvm/book3s_64_vio.c:368 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by qemu-kvm/4264:
#0:
c000201ae2d000d8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0xdc/0x950 [kvm]
#1:
c000200c9ed0c468 (&kvm->srcu){....}-{0:0}, at: kvmppc_h_put_tce+0x88/0x340 [kvm]
====
arch/powerpc/kvm/book3s_64_vio.c:108 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by qemu-kvm/4257:
#0:
c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm]
====
arch/powerpc/kvm/book3s_64_vio.c:146 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by qemu-kvm/4257:
#0:
c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm]
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Wed, 13 May 2020 13:39:15 +0000 (09:39 -0400)]
KVM: PPC: Book3S HV: Ignore kmemleak false positives
[ Upstream commit
0aca8a5575544bd21b3363058afb8f1e81505150 ]
kvmppc_pmd_alloc() and kvmppc_pte_alloc() allocate some memory but then
pud_populate() and pmd_populate() will use __pa() to reference the newly
allocated memory.
Since kmemleak is unable to track the physical memory resulting in false
positives, silence those by using kmemleak_ignore().
unreferenced object 0xc000201c382a1000 (size 4096):
comm "qemu-kvm", pid 124828, jiffies
4295733767 (age 341.250s)
hex dump (first 32 bytes):
c0 00 20 09 f4 60 03 87 c0 00 20 10 72 a0 03 87 .. ..`.... .r...
c0 00 20 0e 13 a0 03 87 c0 00 20 1b dc c0 03 87 .. ....... .....
backtrace:
[<
000000004cc2790f>] kvmppc_create_pte+0x838/0xd20 [kvm_hv]
kvmppc_pmd_alloc at arch/powerpc/kvm/book3s_64_mmu_radix.c:366
(inlined by) kvmppc_create_pte at arch/powerpc/kvm/book3s_64_mmu_radix.c:590
[<
00000000d123c49a>] kvmppc_book3s_instantiate_page+0x2e0/0x8c0 [kvm_hv]
[<
00000000bb549087>] kvmppc_book3s_radix_page_fault+0x1b4/0x2b0 [kvm_hv]
[<
0000000086dddc0e>] kvmppc_book3s_hv_page_fault+0x214/0x12a0 [kvm_hv]
[<
000000005ae9ccc2>] kvmppc_vcpu_run_hv+0xc5c/0x15f0 [kvm_hv]
[<
00000000d22162ff>] kvmppc_vcpu_run+0x34/0x48 [kvm]
[<
00000000d6953bc4>] kvm_arch_vcpu_ioctl_run+0x314/0x420 [kvm]
[<
000000002543dd54>] kvm_vcpu_ioctl+0x33c/0x950 [kvm]
[<
0000000048155cd6>] ksys_ioctl+0xd8/0x130
[<
0000000041ffeaa7>] sys_ioctl+0x28/0x40
[<
000000004afc4310>] system_call_exception+0x114/0x1e0
[<
00000000fb70a873>] system_call_common+0xf0/0x278
unreferenced object 0xc0002001f0c03900 (size 256):
comm "qemu-kvm", pid 124830, jiffies
4295735235 (age 326.570s)
hex dump (first 32 bytes):
c0 00 20 10 fa a0 03 87 c0 00 20 10 fa a1 03 87 .. ....... .....
c0 00 20 10 fa a2 03 87 c0 00 20 10 fa a3 03 87 .. ....... .....
backtrace:
[<
0000000023f675b8>] kvmppc_create_pte+0x854/0xd20 [kvm_hv]
kvmppc_pte_alloc at arch/powerpc/kvm/book3s_64_mmu_radix.c:356
(inlined by) kvmppc_create_pte at arch/powerpc/kvm/book3s_64_mmu_radix.c:593
[<
00000000d123c49a>] kvmppc_book3s_instantiate_page+0x2e0/0x8c0 [kvm_hv]
[<
00000000bb549087>] kvmppc_book3s_radix_page_fault+0x1b4/0x2b0 [kvm_hv]
[<
0000000086dddc0e>] kvmppc_book3s_hv_page_fault+0x214/0x12a0 [kvm_hv]
[<
000000005ae9ccc2>] kvmppc_vcpu_run_hv+0xc5c/0x15f0 [kvm_hv]
[<
00000000d22162ff>] kvmppc_vcpu_run+0x34/0x48 [kvm]
[<
00000000d6953bc4>] kvm_arch_vcpu_ioctl_run+0x314/0x420 [kvm]
[<
000000002543dd54>] kvm_vcpu_ioctl+0x33c/0x950 [kvm]
[<
0000000048155cd6>] ksys_ioctl+0xd8/0x130
[<
0000000041ffeaa7>] sys_ioctl+0x28/0x40
[<
000000004afc4310>] system_call_exception+0x114/0x1e0
[<
00000000fb70a873>] system_call_common+0xf0/0x278
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeffrey Hugo [Mon, 25 May 2020 20:41:25 +0000 (13:41 -0700)]
scsi: ufs-qcom: Fix scheduling while atomic issue
[ Upstream commit
3be60b564de49875e47974c37fabced893cd0931 ]
ufs_qcom_dump_dbg_regs() uses usleep_range, a sleeping function, but can be
called from atomic context in the following flow:
ufshcd_intr -> ufshcd_sl_intr -> ufshcd_check_errors ->
ufshcd_print_host_regs -> ufshcd_vops_dbg_register_dump ->
ufs_qcom_dump_dbg_regs
This causes a boot crash on the Lenovo Miix 630 when the interrupt is
handled on the idle thread.
Fix the issue by switching to udelay().
Link: https://lore.kernel.org/r/20200525204125.46171-1-jeffrey.l.hugo@gmail.com
Fixes:
9c46b8676271 ("scsi: ufs-qcom: dump additional testbus registers")
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>