* regcache.c (registers_length): Remove.
(set_register_cache): Verify that PBUFSIZ is large enough to hold a
full register packet.
* regcache.h (registers_length): Remove prototype.
* server.h (PBUFSIZ): Define to 16384.

* symtab.c (Symbol::init_base_output_data): Add version
parameter.  Change all callers.
(Symbol::init_base_output_segment): Likewise.
(Symbol::init_base_constant): Likewise.
(Symbol::init_base_undefined): Likewise.
(Sized_symbol::init_output_data): Likewise.
(Sized_symbol::init_output_segment): Likewise.
(Sized_symbol::init_constant): Likewise.
(Sized_symbol::init_undefined): Likewise.
(Symbol_table::do_define_in_output_data): If the new symbol has a
version, mark it as the default.
(Symbol_table::do_define_in_output_segment): Likewise.
(Symbol_table::do_define_as_constant): Likewise.
* symtab.h (class Symbol): Update declarations.
(class Sized_symbol): Likewise.
* resolve.cc (Symbol::override_version): New function.
(Symbol::override_base: Call override_version.
(Symbol::override_base_with_special): Likewise.
* testsuite/ver_script_8.script: New file.
* testsuite/Makefile.am (check_PROGRAMS): Add ver_test_8.
(ver_test_8_SOURCES, ver_test_8_DEPENDENCIES): Define.
(ver_test_8_LDFLAGS, ver_test_8_LDADD): Define.
(ver_test_8_1.so, ver_test_8_2.so): New targets.

* ld.texinfo (PowerPC64 ELF64): Fix typo.

* gdb.base/commands.exp (watchpoint_command_test): Handle
gdb,no_hardware_watchpoints.
* gdb.base/float.exp: Allow ARM targets without floating point.
* gdb.base/step-test.exp: Allow callee@plt when stepping in.

* remote.c (extended_remote_create_inferior_1): Clean up
before marking the target running.

    * hppa-tdep.h, hppa-tdep.c, hppa-hpux-tdep.c: Update for unwinder
        changes.

*** empty log message ***

daily update

bfd/
        * elf32-xtensa.c (xtensa_property_section_name): New.
        (xtensa_make_property_section): New.
        (xtensa_get_property_section): Make static.  Do not create a new
        section if it does not exist.
gas/
        * config/tc-xtensa.c (xtensa_create_property_segments): Use
        xtensa_make_property_section instead of xtensa_get_property_section.
        (xtensa_create_xproperty_segments): Likewise.

    * sparc-tdep.c, sparc-tdep.h, sparc-sol2-tdep.c, sparc64-tdep.c,
        sparc64-sol2-tdep.c: Update for unwinder changes.

bfd/
* elf32-spu.c (spu_elf_special_sections): Add "._ea".
(spu_elf_relocate_section): Handle relocations against symbols
defined in ._ea specially.
binutils/
* embedspu.sh: Take note of R_SPU_PPU32/64 relocs without a symbol,
and if present, put image in ".data.speelf".  Put program handle
in ".data.spehandle".
ld/emulparams/
* elf32_spu.sh (OTHER_SECTIONS): Add "._ea".
* elf32ppc.sh: If building with spu support, put ".data.spehandle"
sections at the start of ".data" and provide a symbol to locate
the directory of embedded spe programs.
ld/testsuite/
* ld-spu/ear.s: Align various sections.
* ld-spu/embed.rd: Update.

* ldexp.c (exp_print_token): Add ABSOLUTE, MIN_K, ASSERT_K.  Correct
MAX_K.
(fold_binary <SEGMENT_START>): Set expld.result.section to
current section.  Expand comment.  Formatting.
(fold_name <DEFINED>): Set expld.result.section to current section.

* cp-support.c (mangled_name_to_comp): Initialize storage.
(unqualified_name_from_comp): Likewise.

* remote.c (remote_insert_breakpoint): Call get_remote_state
after gdbarch_breakpoint_from_pc is called.
(remote_insert_hw_breakpoint): Likewise.

PR 6049
* options.h (DEFINE_set): Add VARNAME_begin and VARNAME_end
functions.
(class General_options): Remove existing --undefined, and add
--no-undefined instead.  Add new --undefined as synonym for -u.
* archive.cc (Archive::add_symbols): Check whether symbol was
named with -u.
* gold.cc (queue_middle_tasks): Add -u symbols to symbol table.
* symtab.h (class Symbol): Rename CONSTANT to IS_CONSTANT; change
all uses.  Add IS_UNDEFINED.  Update declarations to split
different versions of init_base.  Declare init_base_undefined.
(Symbol::is_defined): Handle IS_UNDEFINED.
(Symbol::is_undefined): Likewise.
(Symbol::is_weak_undefined): Call is_undefined.
(Symbol::is_absolute): Handle IS_CONSTANT.
(class Sized_symbol): Update declarations to split different
versions of init.  Declare init_undefined.
(class Symbol_table): Declare new functions.
* symtab.cc (Symbol::init_base_object): Rename from init_base.
Change all callers.
(Symbol::init_base_output_data): Likewise.
(Symbol::init_base_output_segment): Likewise.
(Symbol::init_base_constant): Likewise.
(Symbol::init_base_undefined): New function.
(Sized_symbol::init_object): Rename from init.  Change all
callers.
(Sized_symbol::init_output_data): Likewise.
(Sized_symbol::init_output_segment): Likewise.
(Sized_symbol::init_constant): Likewise.
(Sized_symbol::init_undefined): New function.
(Symbol_table::add_undefined_symbols_from_command_line): New
function.
(Symbol_table::do_add_undefined_symbols_from_command_line): New
function.
(Symbol::final_value_is_known): Handle IS_UNDEFINED.
(Symbol::output_section): Likewise.
(Symbol::set_output_section): Likewise.
(Symbol_table::sized_finalize_symbol): Likewise.
(Symbol_table::sized_write_globals): Likewise.
* resolve.cc (Symbol_table::should_override): Likewise.
(Symbol::override_base_with_special): Likewise.

missed from last commit

*** empty log message ***

daily update

* symtab.cc (Symbol_table::add_from_dynobj): If we see a protected
symbol, change it to have default visibility.
* testsuite/protected_1.cc: New file.
* testsuite/protected_2.cc: New file.
* testsuite/protected_3.cc: New file.
* testsuite/protected_main_1.cc: New file.
* testsuite/protected_main_2.cc: New file.
* testsuite/protected_main_3.cc: New file.
* testsuite/Makefile.am (check_PROGRAMS): Add protected_1.
(protected_1_SOURCES, protected_1_DEPENDENCIES): Define.
(protected_1_LDFLAGS, protected_1_LDADD): Define.
(protected_1.so): New target.
(protected_1_pic.o, protected_2_pic.o): New targets.
(protected_3_pic.o): New target.
(check_PROGRAMS): Add protected_2.
(protected_2_SOURCES, protected_2_DEPENDENCIES): Define.
(protected_2_LDFLAGS, protected_2_LDADD): Define.
* testsuite/Makefile.in: Rebuild.

    * gdb.ada/lang_switch: New test program.
        * gdb.ada/lang_switch.exp: New testcase.

    * valprint.c (val_print): Add new language parameter and use it
        instead of using the current_language. Update calls to val_print
        throughout.
        (common_val_print): Add new langauge parameter and pass it to
        val_print.
        * value.h (struct language_defn): Add opaque declaration.
        (val_print, common_val_print): Update declarations.
        * stack.c (print_frame_args): Update call to common_val_print
        using the appropriate language.
        * mi/mi-cmd-stack.c (list_args_or_locals): Likewise.
        * c-valprint, f-valprint.c, m2-valprint.c, mt-tdep.c, infcmd.c,
        mi/mi-main.c, jv-valprint.c, ada-valprint.c, varobj.c, p-valprint.c,
        scm-valprint.c, cp-valprint.c, sh64-tdep.c, printcmd.c:
        #include "language.h" if necessary.
        Update calls to val_print and common_val_print.
        * Makefile.in (mt-tdep.o, sh64-tdep.o, mi-cmds.o, mi-main.o):
        Update dependencies.

* options.h (DEFINE_var): Add set_user_set_##varname__.
(DEFINE_bool_alias): New macro.
(class General_options): Define -Bstatic using DEFINE_bool_alias
rather than DEFINE_special.  Add --undefined as an alias for -z
defs.
* options.cc (General_options::parse_Bstatic): Remove.

    * ia64-tdep.c (ia64_convert_from_func_ptr_addr): Treat addresses
        pointing inside a non-executable section as function descriptors.

* inf-loop.c (inferior_event_handler): Run all continuations and
print any language change before running the breakpoint commands.

    * frame-unwind.c (frame_unwind_got_bytes): New function.
        * frame-unwind.h (frame_unwind_got_bytes): Add declaration.
        * libunwind-frame.h, libunwind-frame.c, ia64-tdep.c: Update
        for unwinder changes.

* options.h (class General_options): Add --fatal-warnings.
* main.cc (main): Implement --fatal-warnings.
* errors.h (Errors::warning_count): New function.

* options.h (class General_options): Add -Bsymbolic-functions.
* symtab.h (Symbol::is_preemptible): Check for
-Bsymbolic-functions.

Correct last patch.

2008-05-05  Ian Lance Taylor  <iant@google.com>

* options.h (DEFINE_bool): For DASH_Z, create the negative option
as noVARNAME rather than no-VARNAME.
(class General_options): Add option -z combreloc.
* output.h (class Output_reloc) [SHT_REL]: Declare compare and
get_address.
(Output_reloc::sort_before) [SHT_REL]: New function.
(Output_reloc::sort_before) [SHT_RELA]: New function.
(class Output_data_reloc_base): Add sort_relocs_ field.  Define
Sort_relocs_comparison.
(Output_data_reloc_base::Output_data_reloc_base): Add sort_relocs
parameter.  Change all callers.
(Output_data_reloc::Output_data_reloc) [both versions]: Add
sort_relocs parameter.  Change all callers.
* output.cc (Output_reloc::get_address): New function, broken out
of write_rel.
(Output_reloc::write_rel): Call it.
(Output_reloc::compare): New function.
(Output_data_reloc_base::do_write): Optionally sort relocs.

daily update

*** empty log message ***

* gdb.base/help.exp (disassemble): Update expected help text.

* NEWS: Mention new /m modifier for disassemble command.
* cli/cli-cmds.c (print_disassembly): New function.
(disassemble_current_function): New function
(disassemble_command): Recognize /m modifier, print mixed
source+assembly.
(init_cli_cmds): Update disassemble help text.

* gdb.texinfo (disassemble): Document /m modifier.

2008-05-05  Maxim Grigoriev  <maxim2405@gmail.com>

* xtensa-tdep.c: Update for unwinder changes.

Update m68k port for unwinder changes.
* m68k-tdep.c (m68k_frame_cache): Expect this_frame.
(m68k_frame_this_id, m68k_frame_prev_register): Update signature.
(m68k_frame_unwind): Use default_frame_sniffer.
(m68k_frame_sniffer): Remove.
(m68k_frame_base_address): Expect this_frame.
(m68k_dummy_id): Renamed from m68k_unwind_dummy_id.  Expect
this_frame.
(m68k_gdbarch_init): Use set_gdbarch_dummy_id,
dwarf2_append_unwinders, and frame_unwind_append_unwinder.
* m68klinux-tdep.c (m68k_linux_pc_in_sigtramp): Expect frame_info
parameter instead of pc value.
(m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
Expect this_frame.
(m68k_linux_sigtramp_frame_this_id)
(m68k_linux_sigtramp_frame_prev_register)
(m68k_linux_sigtramp_frame_sniffer): Update signature.
(m68k_linux_sigtramp_frame_unwind): Use
m68k_linux_sigtramp_frame_sniffer.
(m68k_linux_init_abi): Use frame_unwind_append_unwinder.

* m68klinux-nat.c (store_register): Fix typo.

* configure.ac: If targ_extra_obj is set, link it in.
* configure.tgt: Initialize all variables.
(x86_64*): Set targ_extra_obj and targ_extra_size.
* configure: Rebuild.

* object.cc (Sized_relobj::include_section_group): Adjust section
indexes read from group data.  Build vector to pass to
layout_group.
* layout.cc (Layout::layout_group): Add flags and shndxes
parameters.  Remove contents parameter.  Change caller.  Update
explicit instantiations.
* layout.h (class Layout): Update layout_group declaration.
* output.cc (Output_data_group::Output_data_group): Add flags and
input_shndxes parameters.  Remove contents parameter.  Change
caller.
(Output_data_group::do_write): Change input_sections_ to
input_shndxes_.
* output.h (class Output_data_group): Update constructor
declaration.  Rename input_sections_ to input_shndxes_.
* testsuite/many_sections_test.cc: Add template.

* infcmd.c (step_1): Put thread id on the stack to avoid possible
NULL dereferencing.

* symfile.c (reread_symbols): Update objfile's entry point.

Minor typing error fixes in ChangeLog.

* ada-lang.c: Update throughout to use symbol_matches_domain
instead of matching the symbol domain explictly.
* dwarf2read.c (add_partial_symbol): Do not add new psym for
STRUCT_DOMAIN. Make sure you recognize c++ struct and java and ada
class as typedefs. See lookup_partial_symbol function.
(new_symbol): Similar to add_partial_symbol, do not create
symbol for the typedef. See lookup_block_symbol.
* symtab.c (symbol_matches_domain): New function, takes care
of dual meaning of STRUCT_DOMAIN symbol for c++, ada and java.
(lookup_partial_symbol): Use symbol_matches_domain to see if the
found psym domain matches the given domain.
(lookup_block_symbol): Likewise.

Added 3 miscellaneous testcases like read32.ms uread16.ms hw-trap.ms.

These files removed.

Add the change for testcases comment update and new testcases addition.

Update testcase comment.
   addb.cgs addd.cgs addi.cgs andb.cgs andd.cgs andw.cgs
   ashub.cgs ashub_i.cgs ashud.cgs ashud_i.cgs ashuw.cgs
   ashuw_i.cgs cmpi.cgs cmpw.cgs jlt.cgs jump.cgs loadd.cgs
   loadw.cgs lshb.cgs lshb_i.cgs lshd.cgs lshd_i.cgs lshw.cgs
   lshw_i.cgs movb.cgs movd.cgs movw.cgs movxb.cgs movxw.cgs
   movzb.cgs movzw.cgs mulb.cgs muluw.cgs mulw.cgs orb.cgs
   ord.cgs orw.cgs pop1.cgs pop2.cgs pop3.cgs popret1.cgs
   popret2.cgs popret3.cgs push1.cgs push2.cgs push3.cgs

Added BIT operation testcases:
  cbitb.cgs cbitw.cgs sbitb.cgs sbitw.cgs tbitb.cgs tbit.cgs and tbitw.cgs

    * top.c (command_line_handler_continuation): Remove.
        (execute_command): Do not install the above.

Comment change

Updated the sim engine's ecode logic and commit the code changes

Update for code standards

Cleaned up unwanted code and fixed BIT operations simulation.

Update simops struct members and PSR bits.

Fix typo.

 Update the machine code decode algorithm using hash table.

* inf-loop.c (inferior_event_handler): Call bpstat_do_action,
and catch all exceptions from it.
* top.c (command_line_handler_continuation): Don't
call bpstat_do_action here.

PR 6473
* ld-elf/lma.s, ld-elf/lma.lnk: New test.
* ld-elf/binutils.exp: Run it.

*** empty log message ***

daily update

* dwarf2read.c (struct dwarf2_cu): Add type_hash.
(struct die_info): Remove type.
(read_type_die, read_typedef, read_base_type, read_subrange_type)
(read_structure_type, read_enumeration_type, read_array_type)
(read_tag_pointer_type, read_tag_ptr_to_member_type)
(read_tag_reference_type, read_tag_const_type, read_tag_volatile_type)
(read_tag_string_type, read_subroutine_type, read_set_type)
(read_unspecified_type): Delete prototypes.  Remove check for
already-loaded type.  Return the new type.
(set_die_type): Return the new type.
(reset_die_and_siblings_types): Delete.
(load_comp_unit, load_full_comp_unit): Set type_hash.
(process_queue): Remove call to reset_die_and_siblings_types.
(process_die): Do not read most types here.  Use read_type_die
for others.
(read_func_scope, dwarf2_add_member_fn): Use read_type_die.
(quirk_gcc_member_function_pointer): Return the new type.
(process_structure_scope, process_enumeration_scope): Use
get_die_type and read the DIE's type.
(read_full_die): Do not initialize die->type.
(tag_type_to_type): Use read_type_die.
(read_type_die): Check for already defined types.  Return the
type.
(determine_prefix): Use get_die_type.
(set_die_type): Return the type.
(get_die_type): Take a CU argument.  Check for no type_hash.

* dwarf2read.c (dwarf2_ranges_read, read_partial_die): Initialize
locals.

* gdb.base/longjmp.c, gdb.base/longjmp.exp: New files.

gdb/
* breakpoint.c (update_breakpoints_after_exec): Delete bp_longjmp
and bp_longjmp_resume breakpoints.
(breakpoint_address_is_meaningful): Claim bp_longjmp_resume as
meaningful.
(create_longjmp_breakpoint): Don't create bp_longjmp_resume
breakpoints.  Create bp_longjmp breakpoints as momentary
breakpoints.
(enable_longjmp_breakpoint): Delete.
(set_longjmp_breakpoint): New.
(disable_longjmp_breakpoint): Delete.
(delete_longjmp_breakpoint): New.
(set_longjmp_resume_breakpoint): Delete.
(set_momentary_breakpoint_at_pc): New.
(breakpoint_re_set_one): Don't delete bp_longjmp and
bp_longjmp_resume breakpoints.
(breakpoint_re_set): Don't create longjmp and longjmp-resume
breakpoints.

* infrun.c (step_resume_breakpoint): Add comment.
(struct execution_control_state): Delete handling_longjmp member.
(init_execution_control_state). Don't clear handling_longjmp.
(context_switch): Don't context switch handling_longjmp.
(handle_inferior_event): If handling a bp_longjmp breakpoint,
create a bp_longjmp_resume breakpoint, and set it as current
step_resume_breakpoint, then step over the longjmp breakpoint.  If
handling a bp_longjmp_resume breakpoint, don't delete the longjmp
breakpoint, delete the longjmp-resume breakpoint, and stop
stepping.
(currently_stepping): Remove handling_longjmp from expression.
(insert_step_resume_breakpoint_at_sal): Update comment.
(insert_longjmp_resume_breakpoint): New.

* breakpoint.h (set_momentary_breakpoint_at_pc): Declare.
(enable_longjmp_breakpoint, disable_longjmp_breakpoint): Delete
declarations.
(set_longjmp_breakpoint, delete_longjmp_breakpoint): Declare.
(set_longjmp_resume_breakpoint): Delete declaration.

* gdbthread.h (save_infrun_state): Remove handling_longjmp
parameter.
(load_infrun_state): Delete *handling_longjmp parameter.
* thread.c (save_infrun_state): Remove handling_longjmp parameter.
Update body.
(load_infrun_state): Delete *handling_longjmp parameter.  Update
body.

* infcmd.c (disable_longjmp_breakpoint_cleanup): Delete.
(delete_longjmp_breakpoint_cleanup): New.
(step_1): Call set_longjmp_breakpoint instead of
enable_longjmp_breakpoint.  Use delete_longjmp_breakpoint_cleanup
instead of disable_longjmp_breakpoint_cleanup when making cleanup.
(step_1_continuation): Pass thread id in the continuation args to
step_once.
(step_once): Add thread parameter.  Pass thread id the the
continuation.

gdb/testsuite/
* gdb.cp/annota2.exp: Adjust to breakpoints invalidations at
different times.

gdb/
* Makefile.in: Update dependencies.
* dwarf2read.c: Include "addrmap.h"
(struct dwarf2_cu): New fields RANGES_OFFSET and HAS_RANGES_OFFSET.
(dwarf2_ranges_read): New prototype.
(dwarf2_build_psymtabs_hard): Initialize and prepare PSYMTABS_ADDRMAP.
Add discontiguous range to PSYMTABS_ADDRMAP by DWARF2_RANGES_READ on
HAS_RANGES_OFFSET, otherwise add there the contiguous range.
(dwarf2_ranges_read): New parameter RANGES_PST, update the function
comment for it.  Add the found ranges to RANGES_PST.  New variable
BASEADDR, initialize it the common way.
(dwarf2_get_pc_bounds): Update the caller for the new parameter.
(read_partial_die): `DW_AT_ranges' now only sets RANGES_OFFSET and
HAS_RANGES_OFFSET for the later processing.
* objfiles.h (struct objfile): New field PSYMTABS_ADDRMAP.
* symtab.c: Include "addrmap.h"
(find_pc_sect_psymtab): Support reading the field PSYMTABS_ADDRMAP.
Move the psymtab locator into ...
(find_pc_sect_psymtab_closer): ... a new function.

gdb/testsuite/
* gdb.dwarf2/dw2-ranges.S: Merge the secondary section with `.fini'.
* gdb.dwarf2/dw2-ranges.exp: Compile also `dw2-ranges2.S' and
`dw2-ranges3.S' and test also their MAIN2, FUNC2 and MAIN3 symbols.
* gdb.dwarf2/dw2-ranges2.S, gdb.dwarf2/dw2-ranges3.S: New files.

Set CU BASE_ADDRESS already from partial DIEs.
* dwarf2read.c (read_partial_die): New variables BASE_ADDRESS and
BASE_ADDRESS_TYPE.  Set these variables from DW_AT_LOW_PC and
DW_AT_ENTRY_PC.  Set CU->HEADER.BASE_KNOWN and CU->HEADER.BASE_ADDRESS
from these variables if it was still unset.

* arch-utils.c (gdbarch_update_p): Use default values for
info.abfd and info.target_desc if they are NULL.
(gdbarch_from_bfd): Remove assertion.
(set_gdbarch_from_file): Call gdbarch_find_by_info directly,
using the current target description.
(gdbarch_info_fill): Do not use default values for info->abfd
and info->target_desc.

* symfile.c (reread_symbols): Reload EXEC_BFD on its change.

* inferior.h (read_pc_pid, write_pc_pid): Remove.
* regcache.h (regcache_read_pc, regcache_write_pc): Add prototypes.

* regcache.c (read_pc_pid): Remove, replace by ...
(regcache_read_pc): ... this function.
(write_pc_pid): Remove, replace by ...
(regcache_write_pc): ... this function.
(read_pc, write_pc): Update.

* infrun.c (displaced_step_prepare): Replace read_pc_pid and
write_pc_pid by regcache_read_pc and regcache_write_pc.
(displaced_step_fixup): Likewise.
(resume): Likewise.  Use regcache arch instead of current_gdbarch.
(prepare_to_proceed): Likewise.
(proceed): Likewise.
(adjust_pc_after_break): Likewise.
(handle_inferior_event): Likewise.

* linux-nat.c (cancel_breakpoint): Likewise.
* linux-thread-db.c (check_event): Likewise.
* aix-thread.c (aix_thread_wait): Likewise.
* tracepoint.c (trace_dump_command): Likewise.

* dwarf2loc.c (dwarf_expr_frame_base): Error out on missing
SYMBOL_LOCATION_BATON.

* lib/mi-support.exp (mi_run_cmd): Allow for =thread-created
notification to appear.

Fix formatting

* gdb.texinfo (GDB/MI Output Records): Add
missing semicolon.

    Fix auxv data parsing on 64-bit solaris
* target.h (struct target_ops): New field to_auxv_parse.
* auxv.c (default_auxv_parse): New, renamed from previous
target_auxv_parse.
(target_auxv_parse): Try to call target method.  Fallback to
default_auxv_parse if not found.
* procfs.c (procfs_auxv_parse): New.
(init_procfs_ops): On Solaris, in 64-bit mode, install
procfs_auxv_parse.

* gdb.base/fullname.c: New file.
* gdb.base/fullname.exp: New file.
* lib/gdb.exp (gdb_breakpoint): Support no-message option.

* symfile.c (add_symbol_file_command):  Use paddress rather than
hex_string to print the address.

* rs6000-tdep.c (rs6000_frame_this_id): If info->base is 0,
return the null frame ID to terminate the backtrace.

daily update

*** empty log message ***

* rs6000-tdep.c: Do not include "rs6000-tdep.h".
(rs6000_find_toc_address_hook): Move to rs6000-aix-tdep.c.
(SIG_FRAME_PC_OFFSET): Likewise.
(SIG_FRAME_LR_OFFSET): Likewise.
(SIG_FRAME_FP_OFFSET): Likewise.
(rs6000_push_dummy_call): Likewise.
(rs6000_return_value): Likewise.
(rs6000_convert_from_func_ptr_addr): Likewise.
(branch_dest, rs6000_software_single_step): Likewise.
(deal_with_atomic_sequence): Rename to ...
(ppc_deal_with_atomic_sequence): ... this.  Adapt all callers.
Do not call branch_dest; inline required parts of that function.
(rs6000_skip_trampoline_code): Replace DEPRECATED_SYMBOL_NAME
with SYMBOL_LINKAGE_NAME.
(struct reg, regsize): Delete.
(read_memory_addr): Delete; inline into callers.
(rs6000_skip_prologue): Move after skip_prologue.
(skip_prologue): Remove prototype.
(rs6000_gdbarch_init): Remove sysv_abi variable; perform all
initialization as if this variable were true.  Do not install
ppc64_sysv_abi_adjust_breakpoint_address.

* rs6000-aix-tdep.c: Include "gdb_assert.h", "gdbtypes.h",
"gdbcore.h", "target.h", "value.h", "infcall.h", "objfiles.h",
and "breakpoint.h".
(rs6000_find_toc_address_hook): Move here from rs6000-tdep.c.
(SIG_FRAME_PC_OFFSET): Likewise.
(SIG_FRAME_LR_OFFSET): Likewise.
(SIG_FRAME_FP_OFFSET): Likewise.
(rs6000_push_dummy_call): Likewise.
(rs6000_return_value): Likewise.
(rs6000_convert_from_func_ptr_addr): Likewise.
(branch_dest, rs6000_software_single_step): Likewise.  Replace
tdep->text_segment_base by AIX_TEXT_SEGMENT_BASE.
(rs6000_aix_init_osabi): Install rs6000_push_dummy_call,
rs6000_return_value, and rs6000_convert_from_func_ptr_addr.
Call set_gdbarch_long_double_bit and set_gdbarch_frame_red_zone_size.
Set tdep->lr_frame_offset.  Do not set tdep->text_segment_base.

* rs6000-tdep.h (rs6000_software_single_step): Remove prototype.
(AIX_TEXT_SEGMENT_BASE): New macro.
* rs6000-nat.c (exec_one_dummy_insn): Replace tdep->text_segment_base
by AIX_TEXT_SEGMENT_BASE.

* ppc-tdep.h (ppc_deal_with_atomic_sequence): Add prototype.
(struct gdbarch_tdep): Remove text_segment_base member.
* ppc-linux-tdep.c (ppc_linux_init_abi): On 64-bit, install
ppc64_sysv_abi_adjust_breakpoint_address.

* Makefile.in (rs6000-tdep.o): Update dependencies.
(rs6000-aix-tdep.o): Likewise.

2008-05-03  Luis Machado  <luisgpm@br.ibm.com>
    Thiago Jung Bauermann  <bauerman@br.ibm.com>

* cli/cli-decode.c (lookup_cmd_1): Fix indentation.
* doublest.c (convert_typed_floating): Fix typo in comment.
* dwarf2-frame.c (dwarf2_frame_cache): Likewise.
* frame-unwind.h (frame_sniffer_ftype): Likewise.
* frame.c (frame_unwind_address_in_block): Likewise.
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Likewise.
* symtab.h (struct symbol): Likewise.
* tramp-frame.h (struct trad_frame_cache): Likewise.
* value.c (allocate_repeat_value): Likewise.

* infrun.c (handle_inferior_event): Do not insert breakpoints at
TARGET_WAITKIND_LOADED events during startup (i.e. in the shell).

gdb/
* parse.c (parse_exp_in_context): Don't override
expression_context_pc if get_selected_block returned a valid
block.

gdb/testsuite/
* gdb.base/macscp.exp, gdb.base/macscp1.c: Add test for printing
expressions with macros.

* alpha-tdep.h (ALPHA_REGISTER_BYTES): Delete.
* arm-tdep.h (STATUS_REGISTER_SIZE): Delete.
* breakpoint.c (args_for_catchpoint_enable, current_exception_event):
Delete.
* c-typeprint.c (c_type_print_base): Delete handling of template
instantiations.
* cp-support.h (METHOD_PTR_IS_VIRTUAL, METHOD_PTR_FROM_VOFFSET)
(METHOD_PTR_TO_VOFFSET): Delete.
* defs.h (QUIT_FIXME): Delete.
* f-lang.h (DEFAULT_DOTMAIN_NAME_IN_MF77, DEFAULT_MAIN_NAME_IN_MF77)
(DEFAULT_DOTMAIN_NAME_IN_XLF_BUGGY, DEFAULT_DOTMAIN_NAME_IN_XLF): Delete.
* gdbtypes.h (struct cplus_struct_type): Delete is_inlined,
ninstantiations, and instantiations.
(TYPE_INSTANTIATIONS, TYPE_NINSTANTIATIONS, TYPE_INSTANTIATION)
(TYPE_FN_FIELD_INLINED): Delete.
* srec.h (SREC_BINARY): Delete.
* symtab.c (symbol_init_demangled_name): Delete.
* symtab.h (SYMBOL_INIT_DEMANGLED_NAME, symbol_init_demangled_name)
(SYMBOL_OBJFILE, struct exception_event_record, CURRENT_EXCEPTION_KIND)
(CURRENT_EXCEPTION_CATCH_SAL, CURRENT_EXCEPTION_CATCH_LINE)
(CURRENT_EXCEPTION_CATCH_FILE, CURRENT_EXCEPTION_CATCH_PC)
(CURRENT_EXCEPTION_THROW_SAL, CURRENT_EXCEPTION_THROW_LINE)
(CURRENT_EXCEPTION_THROW_FILE, CURRENT_EXCEPTION_THROW_PC): Delete.
* target.h (enum thread_control_capabilities): Delete tc_switch.
(target_can_switch_threads): Delete.

* gdb.base/dfp-test.exp: Fix random FAIL risk on calling functions.

* Makefile.in (objfiles.o): Update.
* exec.c (exec_set_section_address): Support p->addr != 0.
* objfiles.c (objfile_relocate): Update exec_ops section
addresses.
* symfile.c (place_section): Move exec_set_section_address call...
(default_symfile_offsets): ...to here.

ChangeLog:

* Makefile.in (ppc_linux_tdep_h): New macro.
(powerpc_32l_c, powerpc_altivec32_c, powerpc_altivec32l_c): Likewise.
(powerpc_64l_c, powerpc_altivec64_c, powerpc_altivec64l_c): Likewise.
(powerpc_e500l_c): Likewise.
(ppc-linux-nat.o): Update dependencies.
(ppc-linux-tdep.o): Update dependencies.
(rs6000-tdep.o): Update dependencies.

* ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Remove.
(ppc_linux_svr4_fetch_link_map_offsets): Remove.
(ppc_linux_gregset, ppc_linux_fpregset): Move to ppc-linux-tdep.h
(ppc_supply_reg, ppc_collect_reg): Add prototypes.
(tdesc_powerpc_e500): Remove.

* rs6000.c: Include "features/rs6000/powerpc-altivec32.c"
and "features/rs6000/powerpc-altivec64.c".
(ppc_supply_reg, ppc_collect_reg): Make global.
(variants): Use tdesc_powerpc_32 for "powerpc" and
tdesc_powerpc_altivec64 for "powerpc64".
(_initialize_rs6000_tdep): Initialize AltiVec descriptions.

* ppc-linux-tdep.h: New file.

* ppc-linux-tdep.c: Include "ppc-linux-tdep.c".
Include "features/rs6000/powerpc-32l.c".
Include "features/rs6000/powerpc-altivec32l.c".
Include "features/rs6000/powerpc-64l.c".
Include "features/rs6000/powerpc-altivec64l.c".
Include "features/rs6000/powerpc-e500l.c".
(ppc_linux_supply_gregset): New function.
(ppc_linux_collect_gregset): Handle orig_r3 and trap registers.
(ppc32_linux_gregset): Use ppc_linux_supply_gregset.
(ppc64_linux_gregset): Likewise.
(ppc_linux_sigtramp_cache): Handle orig_r3 and trap registers.
(ppc_linux_trap_reg_p): New function.
(ppc_linux_write_pc): New function.
(ppc_linux_core_read_description): New function.
(ppc_linux_init_abi): Install ppc_linux_write_pc and
ppc_linux_core_read_description.  Install orig_r3 and trap
registers if present in the target description.
(_initialize_ppc_linux_tdep): Initialize Linux target descriptions.

* ppc-linux-nat.c: Include "ppc-linux-tdep.h".
(PT_ORIG_R3, PT_TRAP): Define if necessary.
(ppc_register_u_addr): Handle orig_r3 and trap registers.
(fetch_ppc_registers): Likewise.
(store_ppc_registers): Likewise.
(store_register): Likewise.
(ppc_linux_read_description): Check whether AltiVec is supported.
Check whether inferior is 32-bit or 64-bit.  Return the appropriate
Linux target description.

* features/Makefile (WHICH): Use rs6000/powerpc-32l and
rs6000/powerpc-altivec32l instead of rs6000/powerpc-32.
Use rs6000/powerpc-64l and rs6000/powerpc-altivec64l instead
of rs6000/powerpc-64.  Use rs6000/powerpc-e500l instead of
rs6000/powerpc-e500.  Update -expedite variables accordingly.

* features/rs6000/power-spe.xml: Use regnum 73 for "acc".
* features/rs6000/powerpc-32.xml: Do not include power-altivec.xml.
* features/rs6000/powerpc-64.xml: Do not include power-altivec.xml.
* features/rs6000/powerpc-e500.c: Regenerate.
* features/rs6000/powerpc-32.c: Regenerate.
* features/rs6000/powerpc-64.c: Regenerate.

* features/rs6000/power-linux.xml: New file.
* features/rs6000/power64-linux.xml: New file.
* features/rs6000/powerpc-32l.xml: New file.
* features/rs6000/powerpc-altivec32l.xml: New file.
* features/rs6000/powerpc-64l.xml: New file.
* features/rs6000/powerpc-altivec64l.xml: New file.
* features/rs6000/powerpc-e500l.xml: New file.
* features/rs6000/powerpc-32l.c: New (generated) file.
* features/rs6000/powerpc-altivec32l.c: New (generated) file.
* features/rs6000/powerpc-64l.c: New (generated) file.
* features/rs6000/powerpc-altivec64l.c: New (generated) file.
* features/rs6000/powerpc-e500l.xml: New (generated) file.

* regformats/reg-ppc.dat: Remove.
* regformats/reg-ppc64.dat: Remove.
* regformats/rs6000/powerpc-32.dat: Remove.
* regformats/rs6000/powerpc-64.dat: Remove.
* regformats/rs6000/powerpc-e500.dat: Remove.
* regformats/rs6000/powerpc-32l.dat: New (generated) file.
* regformats/rs6000/powerpc-altivec32l.dat: New (generated) file.
* regformats/rs6000/powerpc-64l.dat: New (generated) file.
* regformats/rs6000/powerpc-altivec64l.dat: New (generated) file.
* regformats/rs6000/powerpc-e500l.dat: New (generated) file.

gdbserver/ChangeLog:

* configure.srv (powerpc*-*-linux*): Set srv_regobj to
powerpc-32l.o, powerpc-altivec32l.o, powerpc-e500l.o,
powerpc-64l.o, and powerpc-altivec64l.o.
Remove rs6000/powerpc-32.xml, rs6000/powerpc-64.xml, and
rs6000/powerpc-e500.xml; add rs6000/powerpc-32l.xml,
rs6000/powerpc-altivec32l.xml, rs6000/powerpc-e500l.xml,
rs6000/powerpc-64l.xml, rs6000/powerpc-altivec64l.xml,
rs6000/power-linux.xml, and rs6000/power64-linux.xml
to srv_xmlfiles.

* Makefile.in (reg-ppc.o, reg-ppc.c): Remove, replace by ...
(powerpc-32l.o, powerpc-32l.c): ... these new rules.
(powerpc-32.o, powerpc-32.c): Remove, replace by ...
(powerpc-altivec32l.o, powerpc-altivec32l.c): ... these new rules.
(powerpc-e500.o, powerpc-e500.c): Remove, replace by ...
(powerpc-e500l.o, powerpc-e500l.c): ... these new rules.
(reg-ppc64.o, reg-ppc64.c): Remove, replace by ...
(powerpc-64l.o, powerpc-64l.c): ... these new rules.
(powerpc-64.o, powerpc-64.c): Remove, replace by ...
(powerpc-altivec64l.o, powerpc-altivec64l.c): ... these new rules.
(clean): Update.

* linux-ppc-low.c (init_registers_ppc): Remove, replace by ...
(init_registers_powerpc_32l): ... this new prototype.
(init_registers_powerpc_32): Remove, replace by ...
(init_registers_powerpc_altivec32l): ... this new prototype.
(init_registers_powerpc_e500): Remove, replace by ...
(init_registers_powerpc_e500l): ... this new prototype.
(init_registers_ppc64): Remove, replace by ...
(init_registers_powerpc_64l): ... this new prototype.
(init_registers_powerpc_64): Remove, replace by ...
(init_registers_powerpc_altivec64l): ... this new prototype.
(ppc_num_regs): Set to 73.
(PT_ORIG_R3, PT_TRAP): Define if necessary.
(ppc_regmap, ppc_regmap_e500): Add values for orig_r3 and trap.
(ppc_cannot_store_register): Handle orig_r3 and trap.
(ppc_arch_setup): Update init_registers_... calls.
(ppc_fill_gregset): Handle orig_r3 and trap.

* inferiors.c (clear_inferiors): Reset current_inferior.

* gdb.texinfo (GDB/MI Output Records):
Document =thread-create and =thread-exited.

* elf32-arm.c (elf32_arm_symbian_link_hash_table_create): Use
ARRAY_SIZE.
(elf32_arm_symbian_plt_sym_val): New.
(elf_backend_plt_sym_val): Define.

* gdb.texinfo (GDB/MI Development and Front Ends):
Document *thread-created and *thread-exited.

2008-05-03  Pedro Alves  <pedro@codesourcery.com>

* thread.c (delete_thread): Call observer_notify_thread_exit.
        * mi/mi-interp.c (mi_interpreter_init): Register mi_thread_exit as
        thread_exit observer.
        (mi_thread_exit): New.

2008-05-03  Mike Frysinger  <vapier@gentoo.org>

* ld-scripts/defined.s: Use .set syntax rather than =.

* breakpoint.c (create_exception_catchpoint): Remove prototype
for already deleted function.
* breakpoint.h (ep_is_exception_catchpoint): Likewise.
* frame.h (show_stack_frame): Remove prototype.
* stack.c (show_stack_frame): Remove empty, unused function.
* source.c (symtab_to_fullname, print_source_lines): Small fix
in comment.
* value.c (show_values): Update comments to mention "show values"
command instead of "info history".

PR 2995, PR 6473
* elf.c (rewrite_elf_program_header): Rather than clearing
p_paddr_valid at end, don't set it in the first place.  Delete
comment no longer relevant.  When not p_paddr_valid, don't set
paddr from vaddr, and don't set p_vaddr_offset.

* linespec.c: Include "target.h".
(minsym_found): Handle minimal symbols pointing to function
descriptors.  Use find_function_start_pc.
* minsyms.c (msymbol_objfile): New function.
* parse.c (write_exp_msymbol): Handle minimal symbols pointing
to function descriptors.
* symtab.c (fixup_section): Only use minimal symbol at the same
address to determine section of a symbol.
(find_function_start_pc): New function.
(find_function_start_sal): Use it.
* symtab.h (msymbol_objfile): Add prototype.
(find_function_start_pc): Likewise.
* value.c: Include "objfiles.h".
(value_fn_field): Handle minimal symbols pointing to function
descriptors.
* Makefile.in (linespec.o): Update dependencies.
(value.o): Likewise.

*** empty log message ***

daily update

    * ada-lang.c (unwrap_value): Handle the case where the "F" field
        inside a PAD type is a bitfield.

* ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Handle
TYPE_CODE_BOOL and TYPE_CODE_CHAR the same as TYPE_CODE_INT.
Handle TYPE_CODE_REF the same as TYPE_CODE_PTR.
Handle TYPE_CODE_METHOD the same as TYPE_CODE_FUNC.
Allow typedefs when checking for function pointer arguments.
Right-align small structs passed on the stack.
(ppc64_sysv_abi_return_value): Handle TYPE_CODE_BOOL and
TYPE_CODE_CHAR the same as TYPE_CODE_INT.
Handle TYPE_CODE_REF the same as TYPE_CODE_PTR.

* Makefile.in (arm-tdep.o): Update.
* arm-tdep.c (arm_objfile_data_key, struct arm_mapping_symbol)
(struct arm_per_objfile, arm_compare_mapping_symbols): New.
(arm_pc_is_thumb): Use mapping symbols.
(arm_objfile_data_cleanup, arm_record_special_symbol): New.
(arm_gdbarch_init): Call set_gdbarch_record_special_symbol.
(_initialize_arm_tdep): Initialize arm_objfile_data_key.
* elfread.c (elf_symtab_read): Use gdbarch_record_special_symbol.
* gdbarch.sh: Add record_special_symbol.
* gdbarch.c, gdbarch.h: Regenerated.
* objfiles.c (struct objfile_data): Add cleanup member.
(register_objfile_data_with_cleanup): New function, from
register_objfile_data.
(register_objfile_data): Use it.
(objfile_free_data): Call clear_objfile_data.
(clear_objfile_data): Call cleanup functions.
* objfiles.h (register_objfile_data_with_cleanup): Declare.

* objfiles.c (init_entry_point_info): Handle shared libraries.

* gdb.base/completion.exp: Handle lack of other symbols beginning
with "a".

* gdb.base/varargs.exp: Correct quoting for options to gdb_compile.

* arm-tdep.c (arm_prologue_this_id): Compare pc, not func, to
lowest_pc.